1. Directly reading interp->result is deprecated in Tcl 8.0 and later;
you're supposed to use Tcl_GetStringResult. This code finally broke with
Tcl 8.5, because Tcl_GetVar can now have side-effects on interp->result even
though it preserves the logical state of the result. (There's arguably a
Tcl issue here, because Tcl_GetVar could invalidate the pointer result of a
just-preceding Tcl_GetStringResult, but I doubt the Tcl guys will see it as
a bug.)
2. We were being sloppy about the encoding of the result: some places would
push database-encoding data into the Tcl result, which should not happen,
and we were assuming that any error result coming back from Tcl was in the
database encoding, which is not a good assumption.
3. There were a lot of calls of Tcl_SetResult that uselessly specified
TCL_VOLATILE for constant strings. This is only a minor performance issue,
but I fixed it in passing since I had to look at all the calls anyway.
#2 is a live bug regardless of which Tcl version you are interested in,
so back-patch even to branches that are unlikely to be used with Tcl 8.5.
I went back as far as 8.0, which is as far as the patch applied easily;
7.4 was using a different error processing scheme that has got its own
problems :-(
This is needed because :: casting binds more tightly than minus, so for
example -1::integer is not the same as (-1)::integer, and there are cases
where the difference is important. In particular this caused a failure
in SELECT DISTINCT ... ORDER BY ... where expressions that should have
matched were seen as different by the parser; but I suspect that there
could be other cases where failure to parenthesize leads to subtler
semantic differences in reloaded rules. Per report from Alexandr Popov.
current transaction has any open references to the target relation or index
(implying it has an active query using the relation). Also back-patch the
8.2 fix that prohibits TRUNCATE and CLUSTER when there are pending
AFTER-trigger events. Per suggestion from Heikki.
called before, not after, calling the assign_hook if any. This is because
push_old_value might fail (due to palloc out-of-memory), and in that case
there would be no stack entry to tell transaction abort to undo the GUC
assignment. Of course the actual assignment to the GUC variable hasn't
happened yet --- but the assign_hook might have altered subsidiary state.
Without a stack entry we won't call it again to make it undo such actions.
So this is necessary to make the world safe for assign_hooks with side
effects. Per a discussion a couple weeks ago with Magnus.
Back-patch to 8.0. 7.x did not have the problem because it did not have
allocatable stacks of GUC values.
cases. Recent buildfarm experience shows that it is sometimes possible
to execute several SQL commands in less time than the granularity of
Windows' not-very-high-resolution gettimeofday(), leading to a failure
because the tests expect the value of now() to change and it doesn't.
Also, it was recognized some time ago that the same area of the tests
could fail if local midnight passes between the insertion and the checking
of the values for 'yesterday', 'tomorrow', etc. Clean all this up per
ideas from myself and Greg Stark.
There remains a window for failure if the transaction block is entered
exactly at local midnight (so that 'now' and 'today' have the same value),
but that seems low-probability enough to live with.
Since the point of this change is mostly to eliminate buildfarm noise,
back-patch to all versions we are still actively testing.
varoattno along with varattno. This resulted in having Vars that were not
seen as equal(), causing inheritance of the "same" constraint from different
parent relations to fail. An example is
create table pp1 (f1 int check (f1>0));
create table cc1 (f2 text, f3 int) inherits (pp1);
create table cc2(f4 float) inherits(pp1,cc1);
Backpatch as far as 7.4. (The test case still fails in 7.4, for reasons
that I don't feel like investigating at the moment.)
This is a backpatch commit only. The fix will be applied in HEAD as part
of the upcoming pg_constraint patch.
checked to see if it's been initialized to all non-nulls. The implicit NOT
NULL constraint was not being checked during the ALTER (in fact, not even if
there was an explicit NOT NULL too), because ATExecAddColumn neglected to
set the flag needed to make the test happen. This has been broken since
the capability was first added, in 8.0.
Brendan Jurd, per a report from Kaloyan Iliev.
results to contain uninitialized, unpredictable values. While this was okay
as far as the datatypes themselves were concerned, it's a problem for the
parser because occurrences of the "same" literal might not be recognized as
equal by datumIsEqual (and hence not by equal()). It seems sufficient to fix
this in the input functions since the only critical use of equal() is in the
parser's comparisons of ORDER BY and DISTINCT expressions.
Per a trouble report from Marc Cousin.
Patch all the way back. Interestingly, array_in did not have the bug before
8.2, which may explain why the issue went unnoticed for so long.
currently support this because we must be able to build Vars referencing
join columns, and varattno is only 16 bits wide. Perhaps this should be
improved in future, but considering that it never came up before, I'm not
sure the problem is worth much effort. Per bug #4070 from Marcello
Ceschia.
The problem seems largely academic in 8.0 and 7.4, because they have
(different) O(N^2) performance issues with such wide joins, but
back-patch all the way anyway.
The places that did, eg,
(statbuf.st_mode & S_IFMT) == S_IFDIR
were correct, but there is no good reason not to use S_ISDIR() instead,
especially when that's what the other 90% of our code does. The places
that did, eg,
(statbuf.st_mode & S_IFDIR)
were flat out *wrong* and would fail in various platform-specific ways,
eg a symlink could be mistaken for a regular file on most Unixen.
The actual impact of this is probably small, since the problem cases
seem to always involve symlinks or sockets, which are unlikely to be
found in the directories that PG code might be scanning. But it's
clearly trouble waiting to happen, so patch all the way back anyway.
(There seem to be no occurrences of the mistake in 7.4.)
to the left of the actual bool value. While in most cases there won't be
any, our support for old-style user-defined functions violates the C spec
to the extent of calling functions that might return char or short through
a function pointer declared to return "char *", which we then coerce to
Datum. It is not surprising that the result might contain garbage
high-order bits ... what is surprising is that we didn't see such cases
long ago. Per report from Magnus.
This is a back-patch of a change that was made in HEAD almost exactly
a year ago. I had refrained from back-patching at the time, but now
we find that this is *necessary* for contrib to work with gcc 4.3.
ISO_8859-5 <-> MULE_INTERNAL conversion tables.
This was discovered when trying to convert a string containing those characters
from ISO_8859-5 to Windows-1251, because we use MULE_INTERNAL/KOI8R as an
intermediate encoding between those two.
While the missing "Yo" was just an omission in the conversion tables, there are
a few other characters like the "Numero" sign ("No" as a single character) that
exists in all the other cyrillic encodings (win1251, ISO_8859-5 and cp866), but
not in KOI8R. Added comments about that.
Patch by Sergey Burladyan. Back-patch to 7.4.
case where there is a match to the pattern overall but the user has specified
a parenthesized subexpression and that subexpression hasn't got a match.
An example is substring('foo' from 'foo(bar)?'). This should return NULL,
since (bar) isn't matched, but it was mistakenly returning the whole-pattern
match instead (ie, 'foo'). Per bug #4044 from Rui Martins.
This has been broken since the beginning; patch in all supported versions.
The old behavior was sufficiently inconsistent that it's impossible to believe
anyone is depending on it.
pg_listener modifications commanded by LISTEN and UNLISTEN until the end
of the current transaction. This allows us to hold the ExclusiveLock on
pg_listener until after commit, with no greater risk of deadlock than there
was before. Aside from fixing the race condition, this gets rid of a
truly ugly kludge that was there before, namely having to ignore
HeapTupleBeingUpdated failures during NOTIFY. There is a small potential
incompatibility, which is that if a transaction issues LISTEN or UNLISTEN
and then looks into pg_listener before committing, it won't see any resulting
row insertion or deletion, where before it would have. It seems unlikely
that anyone would be depending on that, though.
TopMemoryContext, rather than scattered through executor per-query contexts.
This poses no danger of memory leak since the ResourceOwner mechanism
guarantees release of no-longer-needed items. It is needed because the
per-query context might already be released by the time we try to clean up
the hash scan list. Report by ykhuang, diagnosis by Heikki.
Back-patch to 8.0, where the ResourceOwner-based cleanup was introduced.
The given test case does not fail before 8.2, probably because we rearranged
transaction abort processing somehow; but this coding is undoubtedly risky
so I'll patch 8.0 and 8.1 anyway.
Formerly, DecodeDate attempted to verify the day-of-the-month exactly, but
it was under the misapprehension that it would know whether we were looking
at a BC year or not. In reality this check can't be made until the calling
function (eg DecodeDateTime) has processed all the fields. So, split the
BC adjustment and validity checks out into a new function ValidateDate that
is called only after processing all the fields. In passing, this patch
makes DecodeTimeOnly work for BC inputs, which it never did before.
(The historical veracity of all this is nonexistent, of course, but if
we're going to say we support proleptic Gregorian calendar then we should
do it correctly. In any case the unpatched code is broken because it could
emit dates that it would then reject on re-inputting.)
Per report from Bernd Helmle. Back-patch as far as 8.0; in 7.x we were
not using our own calendar support and so this seems a bit too risky
to put into 7.4.
non-default settings for the postmaster's port number. The code to parse
command line options and postgresql.conf entries wasn't quite right about
whitespace or quotes, and it was coded in a not-very-readable way too.
Per bug #3969 from Itagaki Takahiro, though this is more extensive than his
proposed patch (which fixed only the whitespace problem).
This code has been broken since it was put in in 8.0, so patch all the way
back.
calculating a page's initial free space was fine, and should not have been
"improved" by letting PageGetHeapFreeSpace do it. VACUUM FULL is going to
reclaim LP_DEAD line pointers later, so there is no need for a guard
against the page being too full of line pointers, and having one risks
rejecting pages that are perfectly good move destinations.
This also exposed a second bug, which is that the empty_end_pages logic
assumed that any page with no live tuples would get entered into the
fraged_pages list automatically (by virtue of having more free space than
the threshold in the do_frag calculation). This assumption certainly
seems risky when a low fillfactor has been chosen, and even without
tunable fillfactor I think it could conceivably fail on a page with many
unused line pointers. So fix the code to force do_frag true when notup
is true, and patch this part of the fix all the way back.
Per report from Tomas Szepe.
statement be a list of bare C strings, rather than String nodes, which is
what they need to be for copyfuncs/equalfuncs to work. Fortunately these
node types never go out to disk (if they did, we'd likely have noticed the
problem sooner), so we can just fix it without creating a need for initdb.
This bug has been there since 8.0, but 8.3 exposes it in a more common
code path (Parse messages) than prior releases did. Per bug #3940 from
Vladimir Kokovic.
we need to be able to swallow NOTICE messages, and potentially also
ParameterStatus messages (although the latter would be a bit weird),
without exiting COPY OUT state. Fix it, and adjust the protocol documentation
to emphasize the need for this. Per off-list report from Alexander Galler.
constant ORDER/GROUP BY entries properly:
http://archives.postgresql.org/pgsql-hackers/2001-04/msg00457.php
The original solution to that was in fact no good, as demonstrated by
today's report from Martin Pitt:
http://archives.postgresql.org/pgsql-bugs/2008-01/msg00027.php
We can't use the column-number-reference format for a constant that is
a resjunk targetlist entry, a case that was unfortunately not thought of
in the original discussion. What we can do instead (which did not work
at the time, but does work in 7.3 and up) is to emit the constant with
explicit ::typename decoration, even if it otherwise wouldn't need it.
This is sufficient to keep the parser from thinking it's a column number
reference, and indeed is probably what the user must have done to get
such a thing into the querytree in the first place.
and CLUSTER) execute as the table owner rather than the calling user, using
the same privilege-switching mechanism already used for SECURITY DEFINER
functions. The purpose of this change is to ensure that user-defined
functions used in index definitions cannot acquire the privileges of a
superuser account that is performing routine maintenance. While a function
used in an index is supposed to be IMMUTABLE and thus not able to do anything
very interesting, there are several easy ways around that restriction; and
even if we could plug them all, there would remain a risk of reading sensitive
information and broadcasting it through a covert channel such as CPU usage.
To prevent bypassing this security measure, execution of SET SESSION
AUTHORIZATION and SET ROLE is now forbidden within a SECURITY DEFINER context.
Thanks to Itagaki Takahiro for reporting this vulnerability.
Security: CVE-2007-6600
are shared with Tcl, since it's their code to begin with, and the patches
have been copied from Tcl 8.5.0. Problems:
CVE-2007-4769: Inadequate check on the range of backref numbers allows
crash due to out-of-bounds read.
CVE-2007-4772: Infinite loop in regex optimizer for pattern '($|^)*'.
CVE-2007-6067: Very slow optimizer cleanup for regex with a large NFA
representation, as well as crash if we encounter an out-of-memory condition
during NFA construction.
Part of the response to CVE-2007-6067 is to put a limit on the number of
states in the NFA representation of a regex. This seems needed even though
the within-the-code problems have been corrected, since otherwise the code
could try to use very large amounts of memory for a suitably-crafted regex,
leading to potential DOS by driving the system into swap, activating a kernel
OOM killer, etc.
Although there are certainly plenty of ways to drive the system into effective
DOS with poorly-written SQL queries, these problems seem worth treating as
security issues because many applications might accept regex search patterns
from untrustworthy sources.
Thanks to Will Drewry of Google for reporting these problems. Patches by Will
Drewry and Tom Lane.
Security: CVE-2007-4769, CVE-2007-4772, CVE-2007-6067
The zero-point case is sensible so far as the data structure is concerned,
so maybe we ought to allow it sometime; but right now the textual input
routines for these types don't allow it, and it seems that not all the
functions for the types are prepared to cope.
Report and patch by Merlin Moncure.
"bool" into plperl.c. This has always been a hazard since Perl allows a
platform-specific choice to define bool as int rather than char, but
evidently this didn't happen on any platform we support ... until OS X 10.5.
Per report from Brandon Maust.
Back-patch as far as 8.0 --- a bit arbitrary, but it seems unlikely anyone
will be trying to port 7.x onto new platforms.
whole table instead, to ensure that it goes away when the table is dropped.
Per bug #3723 from Sam Mason.
Backpatch as far as 7.4; AFAICT 7.3 does not have the issue, because it doesn't
have general-purpose expression indexes and so there must be at least one
column referenced by an index.
that have default expressions different from their parent. First, if the
parent table's default expression has to be split out as a separate
ALTER TABLE command, we need a dependency constraint to ensure that the
child's command is given second. This is because the ALTER TABLE on the
parent will propagate to the child. (We can't prevent that by using ONLY on
the parent's command, since it's possible that other children exist that
should receive the inherited default.) Second, if the child has a NULL
default where the parent does not, we have to explicitly say DEFAULT NULL on
the child in order for this state to be preserved after reload. (The latter
actually doesn't work right because of a backend bug, but that is a separate
issue.)
Backpatch as far as 8.0. 7.x pg_dump has enough issues with altered tables
(due to lack of dependency analysis) that trying to fix this one doesn't seem
very productive.
it affects. The original coding neglected tablespace entirely (causing
the indexes to move to the database's default tablespace) and for an index
belonging to a UNIQUE or PRIMARY KEY constraint, it would actually try to
assign the parent table's reloptions to the index :-(. Per bug #3672 and
subsequent investigation.
8.0 and 8.1 did not have reloptions, but the tablespace bug is present.
simplification gets detoasted before it is incorporated into a Const node.
Otherwise, if an immutable function were to return a TOAST pointer (an
unlikely case, but it can be made to happen), we would end up with a plan
that depends on the continued existence of the out-of-line toast datum.
eval_const_expressions simplifies this to just "WHERE false", but we have
already done pull_up_IN_clauses so the IN join will be done, or at least
planned, anyway. The trouble case comes when the sub-SELECT is itself a join
and we decide to implement the IN by unique-ifying the sub-SELECT outputs:
with no remaining reference to the output Vars in WHERE, we won't have
propagated the Vars up to the upper join point, leading to "variable not found
in subplan target lists" error. Fix by adding an extra scan of in_info_list
and forcing all Vars mentioned therein to be propagated up to the IN join
point. Per bug report from Miroslav Sulc.
recovery stop time was used. This avoids a corner-case risk of trying to
overwrite an existing archived copy of the last WAL segment, and seems
simpler and cleaner all around than the original definition. Per example
from Jon Colverson and subsequent analysis by Simon.
table, by allocating just enough for a hardcoded number of dead tuples per
page. The current estimate is 200 dead tuples per page.
Per reports from Jeff Amiel, Erik Jones and Marko Kreen, and subsequent
discussion.
CVS: ----------------------------------------------------------------------
CVS: Enter Log. Lines beginning with `CVS:' are removed automatically
CVS:
CVS: Committing in .
CVS:
CVS: Modified Files:
CVS: commands/vacuumlazy.c
CVS: ----------------------------------------------------------------------
no-longer-needed pages at the end of a table. We thought we could throw away
pages containing HEAPTUPLE_DEAD tuples; but this is not so, because such
tuples very likely have index entries pointing at them, and we wouldn't have
removed the index entries. The problem only emerges in a somewhat unlikely
race condition: the dead tuples have to have been inserted by a transaction
that later aborted, and this has to have happened between VACUUM's initial
scan of the page and then rechecking it for empty in count_nondeletable_pages.
But that timespan will include an index-cleaning pass, so it's not all that
hard to hit. This seems to explain a couple of previously unsolved bug
reports.
remote sessions, instead of erroring out in the middle of the operation.
This is a backpatch of a previous fix applied to CLUSTER to HEAD and 8.2, all
the way back that it is relevant to.
recover from elog(ERROR). Problem was created by introduction of hash seq
search tracking awhile back, and affects all branches that have bgwriter;
in HEAD the disease has snuck into autovacuum and walwriter too. (Not sure
that the latter two use hash_seq_search at the moment, but surely they might
someday.) Per report from Sergey Koposov.
an exclusive lock on the table at this point, which we want to release as soon
as possible. This is called in the phase of lazy vacuum where we truncate the
empty pages at the end of the table.
An alternative solution would be to lower the vacuum delay settings before
starting the truncating phase, but this doesn't work very well in autovacuum
due to the autobalancing code (which can cause other processes to change our
cost delay settings). This case could be considered in the balancing code, but
it is simpler this way.
read from the temp file didn't match the file length reported by ftello(),
the wrong variable's value was printed, and so the message made no sense.
Clean up a couple other coding infelicities while at it.
relcache entry after having heap_close'd it. This could lead to misbehavior
if a relcache flush wiped out the cache entry meanwhile. In 8.2 there is a
very real risk of CREATE INDEX CONCURRENTLY using the wrong relid for locking
and waiting purposes. I think the bug is only cosmetic in 8.0 and 8.1,
because their transgression is limited to using RelationGetRelationName(rel)
in an ereport message immediately after heap_close, and there's no way (except
with special debugging options) for a cache flush to occur in that interval.
Not quite sure that it's cosmetic in 7.4, but seems best to patch anyway.
Found by trying to run the regression tests with CLOBBER_CACHE_ALWAYS enabled.
Maybe we should try to do that on a regular basis --- it's awfully slow,
but perhaps some fast buildfarm machine could do it once in awhile.
byte after the last full byte of the bit array, regardless of whether that
byte was part of the valid data or not. Found by buildfarm testing.
Thanks to Stefan Kaltenbrunner for nailing down the cause.
row within one query: we were firing check triggers before all the updates
were done, leading to bogus failures. Fix by making the triggers queued by
an RI update go at the end of the outer query's trigger event list, thereby
effectively making the processing "breadth-first". This was indeed how it
worked pre-8.0, so the bug does not occur in the 7.x branches.
Per report from Pavel Stehule.
hash table is allocated in a child context of the agg node's memory
context, MemoryContextReset() will reset but *not* delete the child
context. Since ExecReScanAgg() proceeds to build a new hash table
from scratch (in a new sub-context), this results in leaking the
header for the previous memory context. Therefore, use
MemoryContextResetAndDeleteChildren() instead.
Credit: My colleague Sailesh Krishnamurthy at Truviso for isolating
the cause of the leak.
on Windows. This is yet another manifestation of the problem that Windows
returns time zone names that may be in a different encoding than we are using.
I've put a better solution in HEAD, but the back branches need a simple patch.
Per report from Hiroshi Saito.
clauses in which one side or the other references both sides of the join
cannot be removed as redundant, because that expression won't have been
constrained below the join. Per report from Sergey Burladyan.
log_min_error_statement is active and there is some problem in logging the
current query string; for example, that it's too long to include in the log
message without running out of memory. This problem has existed since the
log_min_error_statement feature was introduced. No doubt the reason it
wasn't detected long ago is that 8.2 is the first release that defaults
log_min_error_statement to less than PANIC level.
Per report from Bill Moran.
truncated relation was deleted later in the WAL sequence. Since replay
normally auto-creates a relation upon its first reference by a WAL log entry,
failure is seen only if the truncate entry happens to be the first reference
after the checkpoint we're restarting from; which is a pretty unusual case but
of course not impossible. Fix by making truncate entries auto-create like
the other ones do. Per report and test case from Dharmendra Goyal.
when handed an invalidly-encoded pattern. The previous coding could get
into an infinite loop if pg_mb2wchar_with_len() returned a zero-length
string after we'd tested for nonempty pattern; which is exactly what it
will do if the string consists only of an incomplete multibyte character.
This led to either an out-of-memory error or a backend crash depending
on platform. Per report from Wiktor Wodecki.
referencing table does not change the tuple's FK column(s), we don't bother
to check the PK table since the constraint was presumably already valid.
However, the check is still necessary if the tuple was inserted by our own
transaction, since in that case the INSERT trigger will conclude it need not
make the check (since its version of the tuple has been deleted). We got this
right for simple cases, but not when the insert and update are in different
subtransactions of the current top-level transaction; in such cases the FK
check would never be made at all. (Hence, problem dates back to 8.0 when
subtransactions were added --- it's actually the subtransaction version of a
bug fixed in 7.3.5.) Fix, and add regression test cases. Report and fix by
Affan Salman.
been broken since forever, but was not noticed because people seldom look
at raw parse trees. AFAIK, no impact on users except that debug_print_parse
might fail; but patch it all the way back anyway. Per report from Jeff Ross.
This is a Linux kernel bug that apparently exists in every extant kernel
version: sometimes shmctl() will fail with EIDRM when EINVAL is correct.
We were assuming that EIDRM indicates a possible conflict with pre-existing
backends, and refusing to start the postmaster when this happens. Fortunately,
there does not seem to be any case where Linux can legitimately return EIDRM
(it doesn't track shmem segments in a way that would allow that), so we can
get away with just assuming that EIDRM means EINVAL on this platform.
Per reports from Michael Fuhr and Jon Lapham --- it's a bit surprising
we have not seen more reports, actually.
overruns (neither of which seem likely to be exploitable as security holes,
fortunately, since the provoker can't control the data written). One of
these is due to choosing to stomp on the output of a called function, which
is bad news in any case; make it treat the called functions' results as
read-only. Avoid some unnecessary palloc/pfree traffic too; it's not
really helpful to free small temporary objects, and again this is presuming
more than it ought to about the nature of the results of called functions.
Per report from Patrick Welche and additional code-reading by Imad.
The correct test for defined-ness is SvOK(sv), not anything involving
SvTYPE. Per bug #3415 from Matt Taylor.
Back-patch as far as 8.0; no apparent problem in 7.x.
create table foo (bar int default null default 3);
due to not thinking about the special-case handling of DEFAULT NULL.
Problem noticed while investigating bug #3396.
reassembled in the syslogger before writing to the log file. This prevents
partial messages from being written, which mucks up log rotation, and
messages from different backends being interleaved, which causes garbled
logs. Backport as far as 8.0, where the syslogger was introduced.
Tom Lane and Andrew Dunstan
large inputs. Also cause it to error out immediately if the result will
overflow, instead of grinding through a lot of calculation first.
Per gripe from Jim Nasby.
wrong data when dumping a bufferload that crosses a component-file boundary.
This probably has not been seen in the wild because (a) component files are
normally 1GB apiece and (b) non-block-aligned buffer usage is relatively
rare. But it's fairly easy to reproduce a problem if one reduces RELSEG_SIZE
in a test build. Kudos to Kurt Harriman for spotting the bug.
fail when used in a deferred trigger. Bug goes back to 8.0; no doubt the
reason it hadn't been noticed is that we've been discouraging use of
user-defined constraint triggers. Per report from Frank van Vugt.
had been taught not to do that ages ago, the SSL code was helpfully bleating
anyway. Resolves some recent reports such as bug #3266; however the
underlying cause of the related bug #2829 is still unclear.
wrong thing when inlining polymorphic SQL functions, because it was using the
function's declared return type where it should have used the actual result
type of the current call. In 8.1 and 8.2 this causes obvious failures even if
you don't have assertions turned on; in 8.0 and 7.4 it would only be a problem
if the inlined expression were used as an input to a function that did
run-time type determination on its inputs. Add a regression test, since this
is evidently an under-tested area.
is in progress on the same hashtable. This seems the least invasive way to
fix the recently-recognized problem that a split could cause the scan to
visit entries twice or (with much lower probability) miss them entirely.
The only field-reported problem caused by this is the "failed to re-find
shared lock object" PANIC in COMMIT PREPARED reported by Michel Dorochevsky,
which was caused by multiply visited entries. However, it seems certain
that mdsync() is vulnerable to missing required fsync's due to missed
entries, and I am fearful that RelationCacheInitializePhase2() might be at
risk as well. Because of that and the generalized hazard presented by this
bug, back-patch all the supported branches.
Along the way, fix pg_prepared_statement() and pg_cursor() to not assume
that the hashtables they are examining will stay static between calls.
This is risky regardless of the newly noted dynahash problem, because
hash_seq_search() has never promised to cope with deletion of table entries
other than the just-returned one. There may be no bug here because the only
supported way to call these functions is via ExecMakeTableFunctionResult()
which will cycle them to completion before doing anything very interesting,
but it seems best to get rid of the assumption. This affects 8.2 and HEAD
only, since those functions weren't there earlier.
This is needed to allow a security-definer function to set a truly secure
value of search_path. Without it, a malicious user can use temporary objects
to execute code with the privileges of the security-definer function. Even
pushing the temp schema to the back of the search path is not quite good
enough, because a function or operator at the back of the path might still
capture control from one nearer the front due to having a more exact datatype
match. Hence, disable searching the temp schema altogether for functions and
operators.
Security: CVE-2007-2138
failed (due to lock conflicts or out-of-space). We might have already
extended the index's filesystem EOF before failing, causing the EOF to be
beyond what the metapage says is the last used page. Hence the invariant
maintained by the code needs to be "EOF is at or beyond last used page",
not "EOF is exactly the last used page". Problem was created by my patch
of 2006-11-19 that attempted to repair bug #2737. Since that was
back-patched to 7.4, this needs to be as well. Per report and test case
from Vlastimil Krejcir.
return void ends with a SELECT, if that SELECT has a single result that is
also of type void. Without this, it's hard to write a void function that
calls another void function. Per gripe from Peter.
Back-patch as far as 8.0.
executed in read_only mode. This could lead to various relatively-subtle
failures, such as an allegedly stable function returning non-stable results.
Bug goes all the way back to the introduction of read-only mode in 8.0.
Per report from Gaetano Mendola.
did not expect that a DEAD tuple could follow a RECENTLY_DEAD tuple in an
update chain, but because the OldestXmin rule for determining deadness is a
simplification of reality, it is possible for this situation to occur
(implying that the RECENTLY_DEAD tuple is in fact dead to all observers,
but this patch does not attempt to exploit that). The code would follow a
chain forward all the way, but then stop before a DEAD tuple when backing
up, meaning that not all of the chain got moved. This could lead to copying
the chain multiple times (resulting in duplicate copies of the live tuple at
its end), or leaving dangling index entries behind (which, aside from
generating warnings from later vacuums, creates a risk of wrong query
results or bogus duplicate-key errors once the heap slot the index entry
points to is repopulated).
The fix is to recheck HeapTupleSatisfiesVacuum while following a chain
forward, and to stop if a DEAD tuple is reached. Each contiguous group
of RECENTLY_DEAD tuples will therefore be copied as a separate chain.
The patch also adds a couple of extra sanity checks to verify correct
behavior.
Per report and test case from Pavan Deolasee.
POSIX-style timezone specs that don't exactly match any database entry will
be treated as having correct USA DST rules. Also, document that this can
be changed if you want to use some other DST rules with a POSIX zone spec.
We could consider changing localtime.c's TZDEFRULESTRING, but since that
facility can only deal with one DST transition rule, it seems fairly useless
now; might as well just plan to override it using a "posixrules" entry.
Backpatch as far as 8.0. There isn't much we can do in 7.x ... either your
libc gets it right, or it doesn't.
check_sql_fn_retval allows binary-compatibility cases, the expression
extracted from an inline-able SQL function might have a type that is only
binary-compatible with the declared function result type. To avoid possibly
changing the semantics of the expression, we should insert a RelabelType node
in such cases. This has only been shown to have bad consequences in recent
8.1 and up releases, but I suspect there may be failure cases in the older
branches too, so patch it all the way back. Per bug #3116 from Greg Mullane.
Along the way, fix an omission in eval_const_expressions_mutator: it failed
to copy the relabelformat field when processing a RelabelType. No known
observable failures from this, but it definitely isn't intended behavior.
portals using PORTAL_UTIL_SELECT strategy. This is currently significant only
for FETCH queries, which are supposed to include a count in the tag. Seems
it's been broken since 7.4, but nobody noticed before Knut Lehre.
get away with not (re)initializing a local variable if the variable is marked
"isconst" and not "isnull". Unfortunately it makes this decision after having
already freed the old value, meaning that something like
for i in 1..10 loop
declare c constant text := 'hi there';
leads to subsequent accesses to freed memory, and hence probably crashes.
(In particular, this is why Asif Ali Rehman's bug leads to crash and not
just an unexpectedly-NULL value for SQLERRM: SQLERRM is marked CONSTANT
and so triggers this error.)
The whole thing seems wrong on its face anyway: CONSTANT means that you can't
change the variable inside the block, not that the initializer expression is
guaranteed not to change value across successive block entries. Hence,
remove the "optimization" instead of trying to fix it.
DECLARE section needs to know about it. Formerly, everyplace besides DECLARE
that created variables needed to do "plpgsql_add_initdatums(NULL)" to prevent
those variables from being sucked up as part of a subsequent DECLARE block.
This is obviously error-prone, and in fact the SQLSTATE/SQLERRM patch had
failed to do it for those two variables, leading to the bug recently exhibited
by Asif Ali Rehman: a DECLARE within an exception handler tried to reinitialize
SQLERRM.
Although the SQLSTATE/SQLERRM patch isn't in any pre-8.1 branches, and so
I can't point to a demonstrable failure there, it seems wise to back-patch
this into the older branches anyway, just to keep the logic similar to HEAD.
thought that it didn't have to reposition the underlying tuplestore if the
portal is atEnd. But this is not so, because tuplestores have separate read
and write cursors ... and the read cursor hasn't moved from the start.
This mistake explains bug #2970 from William Zhang.
Note: the coding here is pretty inefficient, but given that no one has noticed
this bug until now, I'd say hardly anyone uses the case where the cursor has
been advanced before being persisted. So maybe it's not worth worrying about.
out that ExecEvalVar and friends don't necessarily have access to a tuple
descriptor with correct typmod: it definitely can contain -1, and possibly
might contain other values that are different from the Var's value.
Arguably this should be cleaned up someday, but it's not a simple change,
and in any case typmod discrepancies don't pose a security hazard.
Per reports from numerous people :-(
I'm not entirely sure whether the failure can occur in 8.0 --- the simple
test cases reported so far don't trigger it there. But back-patch the
change all the way anyway.
made query plan. Use of ALTER COLUMN TYPE creates a hazard for cached
query plans: they could contain Vars that claim a column has a different
type than it now has. Fix this by checking during plan startup that Vars
at relation scan level match the current relation tuple descriptor. Since
at that point we already have at least AccessShareLock, we can be sure the
column type will not change underneath us later in the query. However,
since a backend's locks do not conflict against itself, there is still a
hole for an attacker to exploit: he could try to execute ALTER COLUMN TYPE
while a query is in progress in the current backend. Seal that hole by
rejecting ALTER TABLE whenever the target relation is already open in
the current backend.
This is a significant security hole: not only can one trivially crash the
backend, but with appropriate misuse of pass-by-reference datatypes it is
possible to read out arbitrary locations in the server process's memory,
which could allow retrieving database content the user should not be able
to see. Our thanks to Jeff Trout for the initial report.
Security: CVE-2007-0556
we should check that the function code returns the claimed result datatype
every time we parse the function for execution. Formerly, for simple
scalar result types we assumed the creation-time check was sufficient, but
this fails if the function selects from a table that's been redefined since
then, and even more obviously fails if check_function_bodies had been OFF.
This is a significant security hole: not only can one trivially crash the
backend, but with appropriate misuse of pass-by-reference datatypes it is
possible to read out arbitrary locations in the server process's memory,
which could allow retrieving database content the user should not be able
to see. Our thanks to Jeff Trout for the initial report.
Security: CVE-2007-0555
by plpgsql can themselves use SPI --- possibly indirectly, as in the case
of domain_in() invoking plpgsql functions in a domain check constraint.
Per bug #2945 from Sergiy Vyshnevetskiy.
Somewhat arbitrarily, I've chosen to back-patch this as far as 8.0. Given
the lack of prior complaints, it doesn't seem critical for 7.x.
exactly at the point where we need to insert a new item, the calculation used
the wrong size for the "high key" of the new left page. This could lead to
choosing an unworkable split, resulting in "PANIC: failed to add item to the
left sibling" (or "right sibling") failure. Although this bug has been there
a long time, it's very difficult to trigger a failure before 8.2, since there
was generally a lot of free space on both sides of a chosen split. In 8.2,
where the user-selected fill factor determines how much free space the code
tries to leave, an unworkable split is much more likely. Report by Joe
Conway, diagnosis and fix by Heikki Linnakangas.
page about the maximum UTF8 sequence length we support (4 bytes since 8.1,
3 before that). pg_utf2wchar_with_len never got updated to support 4-byte
characters at all, and in any case had a buffer-overrun risk in that it
could produce multiple pg_wchars from what mblen claims to be just one UTF8
character. The only reason we don't have a major security hole is that most
callers allocate worst-case output buffers; the sole exception in released
versions appears to be pre-8.2 iwchareq() (ie, ILIKE), which can be crashed
due to zeroing out its return address --- but AFAICS that can't be exploited
for anything more than a crash, due to inability to control what gets written
there. Per report from James Russell and Michael Fuhr.
Pre-8.1 the risk is much less, but I still think pg_utf2wchar_with_len's
behavior given an incomplete final character risks buffer overrun, so
back-patch that logic change anyway.
This patch also makes sure that UTF8 sequences exceeding the supported
length (whichever it is) are consistently treated as error cases, rather
than being treated like a valid shorter sequence in some places.
involving unions of types having typmods. Variants of the failure are known
to occur in 8.1 and up; not sure if it's possible in 8.0 and 7.4, but since
the code exists that far back, I'll just patch 'em all. Per report from
Brian Hurt.
form '^(foo)$'. Before, these could never be optimized into indexscans.
The recent changes to make psql and pg_dump generate such patterns (for \d
commands and -t and related switches, respectively) therefore represented
a big performance hit for people with large pg_class catalogs, as seen in
recent gripe from Erik Jones. While at it, be more paranoid about
case-sensitivity checking in multibyte encodings, and fix some other
corner cases in which a regex might be interpreted too liberally.
ps_TupFromTlist in plan nodes that make use of it. This was being done
correctly in join nodes and Result nodes but not in any relation-scan nodes.
Bug would lead to bogus results if a set-returning function appeared in the
targetlist of a subquery that could be rescanned after partial execution,
for example a subquery within EXISTS(). Bug has been around forever :-(
... surprising it wasn't reported before.
immutable, because their results depend on lc_numeric; this is a longstanding
oversight. We cannot force initdb for this in the back branches, but we can
at least provide correct catalog entries for future installations.
(in particular, causing the ReadyForQuery message to be eaten) before
returning from do_copy. The only known consequence of failing to do so is
that get_prompt might show a wrong result for the %x transaction status
escape, as reported by Bernd Helmle; but it's possible there are other issues.
Back-patch as far as 7.4, the oldest version supporting %x.
cause any serious harm in normal cases, but if you have gcc buffer overrun
checking turned on, that will notice. Found by Jack Orenstein. Problem
was already fixed in CVS HEAD.
any no-longer-needed segments; just truncate them to zero bytes and leave
the files in place for possible future re-use. This avoids problems when
the segments are re-used due to relation growth shortly after truncation.
Before, the bgwriter, and possibly other backends, could still be holding
open file references to the old segment files, and would write dirty blocks
into those files where they'd disappear from the view of other processes.
Back-patch as far as 8.0. I believe the 7.x branches are not vulnerable,
because they had no bgwriter, and "blind" writes by other backends would
always be done via freshly-opened file references.
preference for filling pages out-of-order tends to confuse the sanity checks
in md.c, as per report from Balazs Nagy in bug #2737. The fix is to ensure
that the smgr-level code always has the same idea of the logical EOF as the
hash index code does, by using ReadBuffer(P_NEW) where we are adding a single
page to the end of the index, and using smgrextend() to reserve a large batch
of pages when creating a new splitpoint. The patch is a bit ugly because it
avoids making any changes in md.c, which seems the most prudent approach for a
backpatchable beta-period fix. After 8.3 development opens, I'll take a look
at a cleaner but more invasive patch, in particular getting rid of the now
unnecessary hack to allow reading beyond EOF in mdread().
Backpatch as far as 7.4. The bug likely exists in 7.3 as well, but because
of the magnitude of the 7.3-to-7.4 changes in hash, the later-version patch
doesn't even begin to apply. Given the other known bugs in the 7.3-era hash
code, it does not seem worth trying to develop a separate patch for 7.3.
sub-arrays. Per discussion, if all inputs are empty arrays then result
must be an empty array too, whereas a mix of empty and nonempty arrays
should (and already did) draw an error. In the back branches, the
construct was strict: any NULL input immediately yielded a NULL output;
so I left that behavior alone. HEAD was simply ignoring NULL sub-arrays,
which doesn't seem very sensible. For lack of a better idea it now
treats NULL sub-arrays the same as empty ones.
_bt_pagedel to recover from the failure: just search the whole parent level
if searching to the right fails. This does nothing for the underlying problem
that index keys became out-of-order in the grandparent level. However, we
believe that there is no other consequence worse than slightly inefficient
searching, so this narrow patch seems like the safest solution for the back
branches.
sin_port in the returned IP address struct when servname is NULL. This has
been observed to cause failure to bind the stats collection socket, and
could perhaps cause other issues too. Per reports from Brad Nicholson
and Chris Browne.
1) pgwin32_waitforsinglesocket(): WaitForMultipleObjectsEx now called with
finite timeout (100ms) in case of FP_WRITE and UDP socket. If timeout occurs
then pgwin32_waitforsinglesocket() tries to write empty packet goes to
WaitForMultipleObjectsEx again.
2) pgwin32_send(): add loop around WSASend and pgwin32_waitforsinglesocket().
The reason is: for overlapped socket, 'ok' result from
pgwin32_waitforsinglesocket() isn't guarantee that socket is still free,
it can become busy again and following WSASend call will fail with
WSAEWOULDBLOCK error.
See http://archives.postgresql.org/pgsql-hackers/2006-10/msg00561.php
rows --- if the surrounding query queued any trigger events between the rows,
the events would be fired at the wrong time, leading to bizarre behavior.
Per report from Merlin Moncure.
This is a simple patch that should solve the problem fully in the back
branches, but in HEAD we also need to consider the possibility of queries
with RETURNING clauses. Will look into a fix for that separately.
I introduced in 7.4.1 :-(. It's correct to allow unknown to be coerced to
ANY or ANYELEMENT, since it's a real-enough data type, but it most certainly
isn't an array datatype. This can cause a backend crash but AFAICT is not
exploitable as a security hole. Per report from Michael Fuhr.
Note: as fixed in HEAD, this changes a constant in the pg_stats view,
resulting in a change in the expected regression outputs. The back-branch
patches have been hacked to avoid that, so that pre-existing installations
won't start failing their regression tests.
attislocal = true, since they are not really inherited but merely copied
from the original table. I'm not sure if there are any cases where it makes
a real difference given the existing uses of the flag, but wrong is wrong.
This was fixed in passing in HEAD by the LIKE INCLUDING CONSTRAINTS patch,
but never back-patched.
Formerly they'd emit '^foo|bar$' which is wrong because the anchors are
parsed as part of the alternatives; must emit '^(foo|bar)$' to get expected
behavior. Same as bug found previously in similar_escape(). Already fixed
in HEAD, this is just back-porting the part of that patch that was a bug fix.
tried a variant file from resultmap and it didn't match. This is already done
in HEAD's C-code version, and is needed because OpenBSD has recently migrated
to a more standard handling of float underflow --- see buildfarm results
from emu.
quote chars inside quote marks, should emit one quote *and stay in inquotes
mode*. No doubt the lack of reports of this have something to do with the
poor documentation of the feature ...
overlapping possible matches for the separator string, such as
string_to_array('123xx456xxx789', 'xx').
Also, revise the logic of replace(), split_part(), and string_to_array()
to avoid O(N^2) work from redundant searches and conversions to pg_wchar
format when there are N matches to the separator string.
Backpatched the full patch as far as 8.0. 7.4 also has the bug, but the
code has diverged a lot, so I just went for a quick-and-dirty fix of the
bug itself in that branch.
been initialized yet. This can happen because there are code paths that call
SysCacheGetAttr() on a tuple originally fetched from a different syscache
(hopefully on the same catalog) than the one specified in the call. It
doesn't seem useful or robust to try to prevent that from happening, so just
improve the function to cope instead. Per bug#2678 from Jeff Trout. The
specific example shown by Jeff is new in 8.1, but to be on the safe side
I'm backpatching 8.0 as well. We could patch 7.x similarly but I think
that's probably overkill, given the lack of evidence of old bugs of this ilk.
