"eval q{foo}" used to complain that the error was on line 2 of the eval'd
string, because eval internally tacked on "\n;" so that the end of the
erroneous command was indeed on line 2. But as of Perl 5.18 it more
sanely says that the error is on line 1. To avoid Perl-version-dependent
regression test results, use "eval q{foo;}" instead in the two places
where this matters. Per buildfarm.
Since people might try to use newer Perl versions with older PG releases,
back-patch as far as 9.0 where these test cases were added.
Careless use of TopMemoryContext for I/O function data meant that repeated
use of spi_prepare and spi_freeplan would leak memory at the session level,
as per report from Christian Schröder. In addition, spi_prepare
leaked a lot of transient data within the current plperl function's SPI
Proc context, which would be a problem for repeated use of spi_prepare
within a single plperl function call; and it wasn't terribly careful
about releasing permanent allocations in event of an error, either.
In passing, clean up some copy-and-pasteos in query-lookup error messages.
Alex Hunsaker and Tom Lane
plpython tried to use a single cache entry for a trigger function, but it
needs a separate cache entry for each table the trigger is applied to,
because there is table-dependent data in there. This was done correctly
before 9.1, but commit 46211da1b8 broke it
by simplifying the lookup key from "function OID and triggered table OID"
to "function OID and is-trigger boolean". Go back to using both OIDs
as the lookup key. Per bug report from Sandro Santilli.
Andres Freund
Back-patch commits 9afc648111 and
b8fbbcf37f. The first of these is really
a minor code cleanup to save a few cycles, but it turns out to provide
a workaround for the misoptimization problem described in bug #7516.
The second commit adds a regression test case.
Back-patch the fix to all active branches. The test case only works
as far back as 9.0, because it relies on plpgsql which isn't installed
by default before that. (I didn't have success modifying it into an
all-plperl form that still provoked a crash, though this may just reflect
my lack of Perl-fu.)
validate_plperl_function() supposed that it could free an old
plperl_proc_desc struct immediately upon detecting that it was stale.
However, if a plperl function is called recursively, this could result
in deleting the struct out from under an outer invocation, leading to
misbehavior or crashes. Add a simple reference-count mechanism to
ensure that such structs are freed only when the last reference goes
away.
Per investigation of bug #7516 from Marko Tiikkaja. I am not certain
that this error explains his report, because he says he didn't have
any recursive calls --- but it's hard to see how else it could have
crashed right there. In any case, this definitely fixes some problems
in the area.
Back-patch to all active branches.
Perl, for some unaccountable reason, believes it's a good idea to reset
SIGFPE handling to SIG_IGN. Which wouldn't be a good idea even if it
worked; but on some platforms (Linux at least) it doesn't work at all,
instead resulting in forced process termination if the signal occurs.
Given the lack of other complaints, it seems safe to assume that Perl
never actually provokes SIGFPE and so there is no value in the setting
anyway. Hence, reset it to our normal handler after initializing Perl.
Report, analysis and patch by Andres Freund.
We used to convert the unicode object directly to a string in the server
encoding by calling Python's PyUnicode_AsEncodedString function. In other
words, we used Python's routines to do the encoding. However, that has a
few problems. First of all, it required keeping a mapping table of Python
encoding names and PostgreSQL encodings. But the real killer was that Python
doesn't support EUC_TW and MULE_INTERNAL encodings at all.
Instead, convert the Python unicode object to UTF-8, and use PostgreSQL's
encoding conversion functions to convert from UTF-8 to server encoding. We
were already doing the same in the other direction in PLyUnicode_FromString,
so this is more consistent, too.
Note: This makes SQL_ASCII to behave more leniently. We used to map
SQL_ASCII to Python's 'ascii', which on Python means strict 7-bit ASCII
only, so you got an error if the python string contained anything but pure
ASCII. You no longer get an error; you get the UTF-8 representation of the
string instead.
Backpatch to 9.0, where these conversions were introduced.
Jan Urbański
These only pass cleanly on UTF8 and SQL_ASCII encodings, besides the
Japanese encoding in which they were originally written, which is clearly
not good enough. Since the functionality they test has not ever been
tested from PL/Perl, the best answer seems to be to remove the new tests
completely.
Per buildfarm results and ensuing discussion.
Due to a git hook blowing up in my face telling me I could not commit
Peter Eisentraut's patch on his name, I had to "git reset" to fix the
previous commit ... and then forgot that I needed to "git add" these
files :-(
When in SQL_ASCII encoding, strings passed around are not necessarily
UTF8-safe. We had already fixed this in some places, but it looks like
we missed some.
I had to backpatch Peter Eisentraut's a8b92b60 to 9.1 in order for this
patch to cherry-pick more cleanly.
Patch from Alex Hunsaker, tweaked by Kyotaro HORIGUCHI and myself.
Some desultory cleanup and comment addition by me, during patch review.
Per bug report from Christoph Berg in
20120209102116.GA14429@msgid.df7cb.de
That caused the plpython_unicode regression test to fail on SQL_ASCII
encoding, as evidenced by the buildfarm. The reason is that with the patch,
you don't get the detail in the error message that you got before. That
detail is actually very informative, so rather than just adjust the expected
output, let's revert that part of the patch for now to make the buildfarm
green again, and figure out some other way to avoid the recursion of
PLy_elog() that doesn't lose the detail.
Windows encodings, "win1252" and so forth, are named differently in Python,
like "cp1252". Also, if the PyUnicode_AsEncodedString() function call fails
for some reason, use a plain ereport(), not a PLy_elog(), to report that
error. That avoids recursion and crash, if PLy_elog() tries to call
PLyUnicode_Bytes() again.
This fixes bug reported by Asif Naeem. Backpatch down to 9.0, before that
plpython didn't even try these conversions.
Jan Urbański, with minor comment improvements by me.
Before 9.1, PL/Python functions returning composite types could return
a string and it would be parsed using record_in. The 9.1 changes made
PL/Python only expect dictionaries, tuples, or objects supporting
getattr as output of composite functions, resulting in a regression
and a confusing error message, as the strings were interpreted as
sequences and the code for transforming lists to database tuples was
used. Fix this by treating strings separately as before, before
checking for the other types.
The reason why it's important to support string to database tuple
conversion is that trigger functions on tables with composite columns
get the composite row passed in as a string (from record_out).
Without supporting converting this back using record_in, this makes it
impossible to implement pass-through behavior for these columns, as
PL/Python no longer accepts strings for composite values.
A better solution would be to fix the code that transforms composite
inputs into Python objects to produce dictionaries that would then be
correctly interpreted by the Python->PostgreSQL counterpart code. But
that would be too invasive to backpatch to 9.1, and it is too late in
the 9.2 cycle to attempt it. It should be revisited in the future,
though.
Reported as bug #6559 by Kirill Simonov.
Jan Urbański
An incorrect and entirely unnecessary "safety check" in exec_stmt_getdiag()
caused the code to treat an assignment to a variable with dno zero as a
no-op. Unfortunately, that's a perfectly valid dno. This has been broken
since GET DIAGNOSTICS was invented. It's not terribly surprising that the
bug went unnoticed for so long, since in most cases you probably wouldn't
use the function's first-created variable (normally its first parameter)
as a GET DIAGNOSTICS target. Nonetheless, it's broken. Per bug #6551
from Adam Buraczewski.
Failing to do so causes trigger invocation to fail when they are nested
within a function invocation that changes the current package.
Backpatch to 9.1; previous releases used a different method to obtain
_TD. Per bug report from Mark Murawski (bug #6511)
Author: Alex Hunsaker
Dave Malcolm of Red Hat is working on a static code analysis tool for
Python-related C code. It reported a number of problems in plpython,
most of which were failures to check for NULL results from object-creation
functions, so would only be an issue in very-low-memory situations.
Patch in HEAD and 9.1. We could go further back but it's not clear that
these issues are important enough to justify the work.
Jan Urbański
Datatype I/O functions are allowed to leak memory in CurrentMemoryContext,
since they are generally called in short-lived contexts. However, plpgsql
calls such functions for purposes of type conversion, and was calling them
in its procedure context. Therefore, any leaked memory would not be
recovered until the end of the plpgsql function. If such a conversion
was done within a loop, quite a bit of memory could get consumed. Fix by
calling such functions in the transient "eval_econtext", and adjust other
logic to match. Back-patch to all supported versions.
Andres Freund, Jan Urbański, Tom Lane
Certain things like typeglobs or readonly things like $^V cause
perl's SvPVutf8() to die nastily and crash the backend. To avoid
that bug we make a copy of the object, which will subsequently be
garbage collected.
Back patched to 9.1 where we first started using SvPVutf8().
Per -hackers discussion. Original problem reported by David Wheeler.
distro version of perl.
David Wheeler and Alex Hunsaker.
Backpatch to 9.1 where it applies cleanly. A simple workaround is available for earlier
branches, and further effort doesn't seem warranted.
exception handler. This was a regression in 9.1, when the capability
to catch specific SPI errors was added, so backpatch to 9.1.
Mika Eloranta, with some editing by Jan Urbański.
This seems to have been just an oversight in previous foreign-table work.
A quick grep didn't turn up any other places where RELKIND_FOREIGN_TABLE
was obviously omitted.
One change noted by Alexander Soudakov, the other by me.
Back-patch to 9.1.
This patch restores the pre-9.1 behavior that pl/perl functions returning
VOID ignore the result value of their last Perl statement. 9.1.0
unintentionally threw an error if the last statement returned a reference,
as reported by Amit Khandekar.
Also, make sure it works to return a string value for a composite type,
so long as the string meets the type's input format. We already allowed
the equivalent behavior for arrays, so it seems inconsistent to not allow
it for composites.
In addition, ensure we throw errors for attempts to return arrays or hashes
when the function's declared result type is not an array or composite type,
respectively. Pre-9.1 versions rather uselessly returned strings like
ARRAY(0x221a9a0) or HASH(0x221aa90), while 9.1.0 threw an error for the
hash case and returned a garbage value for the array case.
Also, clean up assorted grotty coding in Perl array conversion, including
use of a session-lifespan memory context to accumulate the array value
(resulting in session-lifespan memory leak on error), failure to apply the
declared typmod if any, and failure to detect some cases of non-rectangular
multi-dimensional arrays.
Alex Hunsaker and Tom Lane
The $(PERL) macro will be set by configure if it finds perl at all,
but $(perl_privlibexp) isn't configured unless you said --with-perl.
This results in confusing error messages if someone cd's into
src/pl/plperl and tries to build there despite the configure omission,
as reported by Tomas Vondra in bug #6198. Add simple checks to
provide a more useful report, while not disabling other use of the
makefile such as "make clean".
Back-patch to 9.0, which is as far as the patch applies easily.
Module initialization functions in Python 3 must have external
linkage, because PyMODINIT_FUNC does dllexport on Windows-like
platforms. Without this change, the build with Python 3 fails on
Windows.
Dropped columns within a composite type were not handled correctly.
Also, we did not check for whether a composite result type had changed
since we cached the information about it.
Jan Urbański, per a bug report from Jean-Baptiste Quenot
Bug reported by David Wheeler, fix by Alex Hunsaker.
# Please enter the commit message for your changes. Lines starting
# with '#' will be ignored, and an empty message aborts the commit.
# On branch master
# Changes to be committed:
# (use "git reset HEAD <file>..." to unstage)
#
# modified: src/pl/plperl/plperl.c
#
# Untracked files:
# (use "git add <file>..." to include in what will be committed)
#
# autom4te.cache/
# configure.in~
# doc/src/sgml/ref/grant.sgml~
# src/backend/port/win32_latch.c~
# src/bin/psql/command.c~
# src/include/pg_config.h.win32~
# src/pl/plpython/plpython.c~
# src/tools/msvc/pgbison.bat~
# src/tools/msvc/pgbison.pl.bak
# src/tools/msvc/pgflex.bat~
# src/tools/msvc/pgflex.pl.bak
# src/tools/pgindent/README~
# src/tools/pgindent/pgindent.pl
# src/tools/pgindent/pgindent.pl~
# xxxxx
# yyyyyy
There may be some other places where we should use errdetail_internal,
but they'll have to be evaluated case-by-case. This commit just hits
a bunch of places where invoking gettext is obviously a waste of cycles.
Certain subdirectories do not get built if corresponding options are not
selected at configure time. However, "make distprep" should visit such
directories anyway, so that constructing derived files to be included in
the tarball happens without requiring all configure options to be given
in the tarball build script. Likewise, it's better if cleanup actions
unconditionally visit all directories (for example, this ensures proper
cleanup if someone has done a manual make in such a subdirectory).
To handle this, set up a convention that subdirectories that are
conditionally included in SUBDIRS should be added to ALWAYS_SUBDIRS
instead when they are excluded.
Back-patch to 9.1, so that plpython's spiexceptions.h will get provided
in 9.1 tarballs. There don't appear to be any instances where distprep
actions got missed in previous releases, and anyway this fix requires
gmake 3.80 so we don't want to apply it before 9.1.
According to perlguts, &PL_sv_undef is not the right thing to use in
those cases because it doesn't behave the same way as an undef value via
Perl code. Seems the intuitive way to deal with undef values is subtly
enough broken that it's hard to notice when misused.
The broken uses got inadvertently introduced in commit
87bb2ade2c by Alexey Klyukin, Alex
Hunsaker and myself on 2011-02-17; no backpatch is necessary.
Per testing report from Greg Mullane.
Author: Alex Hunsaker
