Previously, if a base backup failed after it had started streaming
files, pg_stat_progress_basebackup could continue to show a stale
progress entry even though the backup was no longer running. This could
be observed when the client kept the replication connection open after
the error. It is normally not observable when using pg_basebackup,
because the client disconnects after the error.
The problem was that progress reporting was cleared only after
successful completion.
This commit moves the progress reporting cleanup into the progress
sink's cleanup callback so that it is cleared after both successful
and failed backups.
Backpatch to v15. v14 has the same issue, but the fix does not apply
cleanly because it lacks the base backup sink infrastructure. Since
the bug does not affect the backup itself and is normally not
observable when using pg_basebackup, skip the v14 backpatch.
Author: Chao Li <lic@highgo.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/EA1A6CD2-EFA6-462B-9A02-03003555AB4A@gmail.com
Backpatch-through: 15
off_t is most likely a 64-bit integer, so casting it to a 32-bit type
for output could lose data. There are more issues like this in the
tree, but this is an instance where this could actually happen in
practice, since base backups are routinely larger than 4 GB. So this
is separated out as a bug fix.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://www.postgresql.org/message-id/flat/20ce62fa-47fc-457b-b504-12f3c1651726%40eisentraut.org
Commit 4035cd5d4 added LZ4 compression for full-page writes in WAL, and
retained "on" as a backward-compatible way to specify the builtin PGLZ
method. Document this meaning of "on" and update postgresql.conf.sample
to make the equivalence clear.
Author: Christoph Berg <myon@debian.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/akJDHRtXwGLTppsQ@msg.df7cb.de
Backpatch-through: 15
Previously, if an unlogged sequence was created on the primary and
replicated to a standby, reading the sequence after promoting the
standby (for example, with nextval()) could trigger the following
assertion failure:
TRAP: failed Assert("((const PageHeaderData *) page)->pd_special >= SizeOfPageHeaderData")
In non-assert builds, the same operation could instead fail with an
error such as:
ERROR: bad magic number in sequence
The problem was that seq_redo() updated the init fork page in shared
buffers but did not flush it to disk. During promotion,
ResetUnloggedRelations() recreates the main fork of unlogged
relations by copying the init fork from disk, bypassing shared
buffers. As a result, the main fork could be recreated from a stale
init fork instead of the WAL-replayed page.
Fix this by introducing a helper to flush init fork buffers
immediately, and make seq_redo() use it. As a result, the main fork
of an unlogged sequence is recreated from the up-to-date init fork on
disk, allowing the unlogged sequence to be read successfully after
standby promotion.
Backpatch to v15, where unlogged sequences were introduced.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Discussion: https://postgr.es/m/CAHGQGwH1Ssze3XM6wjoTjSLVOR041c6xP+vsdLP951=w8oG8bA@mail.gmail.com
Backpatch-through: 15
Treat copy_file_range() return value of zero as an error: it indicates
that no bytes could be copied (perhaps the source file is shorter than
expected), and the existing retry loop would otherwise spin forever
since nwritten would never reach BLCKSZ.
The other uses of copy_file_range() in the tree don't have this
problem.
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Yingying Chen <cyy9255@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/3208cf7a-c7f3-41eb-92f6-33cbeff4df40%40eisentraut.org
PL/Python and its hstore and jsonb transforms build SQL values from
Python containers by calling Python C API functions that can return
NULL, and in several places the result was used without first checking
it.
On the sequence side, PySequence_GetItem() is used when converting a
returned sequence into a SQL array or composite value, when reading
the argument list passed to plpy.execute() or plpy.cursor(), and when
reading the list of type names given to plpy.prepare(). On the
mapping side, the hstore and jsonb transforms call PyMapping_Size()
and PyMapping_Items() and then index the result with PyList_GetItem()
and PyTuple_GetItem().
All of these return NULL (or -1), with a Python exception set, for a
broken object: for example one whose __getitem__() or items() raises,
or which reports a length that disagrees with what it actually yields.
The unchecked result was then dereferenced, crashing the backend.
Fix this by checking the result of each call and reporting a regular
error if it failed, so that the underlying Python exception is
surfaced instead of taking down the session.
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Ayush Tiwari <ayushtiwari.slg01@gmail.com>
Discussion: https://postgr.es/m/CAMbWs49BKM9wP6m8bCXEpHwQKp7usvOGV6Jf=J7FYr_BCpxLqg@mail.gmail.com
Backpatch-through: 14
In get_perl_array_ref(), for a PostgreSQL::InServer::ARRAY object, we
look up its "array" key with hv_fetch_string() and then inspect the
returned SV. However, hv_fetch_string() returns a NULL pointer when
the key is absent, and the code dereferenced that result without first
checking whether the pointer itself was NULL. As a result, a plperl
function returning a forged PostgreSQL::InServer::ARRAY object that
lacks the "array" key would crash the backend with a segmentation
fault.
Fix this by checking the pointer returned by hv_fetch_string() before
dereferencing it, matching how other callers in this file already
guard the result. With the check in place, such an object falls
through to the existing error report instead of crashing.
Author: Xing Guo <higuoxing@gmail.com>
Reviewed-by: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/CACpMh+DYgcnqZwQLXXuxQcehJTd7T8UmKWSLsK4mFBEp9G2ajA@mail.gmail.com
Backpatch-through: 14
When ALTER TABLE ... ATTACH PARTITION matches partition indexes to the
parent table's indexes, invalid indexes are skipped. This commit
improves the documentation to describe what e90e9275f5 has changed:
invalid indexes are skipped, and only valid indexes are considered for a
match.
Author: Mohamed Ali <moali.pg@gmail.com>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/CAGnOmWpAMaE-BOkpwM6mJnHcpS2QZ8yLSSaqmz+vryEsbCWWWA@mail.gmail.com
Backpatch-through: 14
This routine acts as a wrapper of a new pgstat_drop_entry_ext(), used in
the core code with a missing_ok argument.
This includes an update of .abi-compliance-history, removing the latest
entry that has documented the change of pgstat_drop_entry(). This
change is applied across v15~v18. HEAD keeps pgstat_drop_entry() as
single entry point, with the new missing_ok.
Per discussion with Álvaro Herrera and Lukas Fittl. This is a follow-up
of 850b9218c8.
Discussion: https://postgr.es/m/ajZz_sVJVX7pmPHo@alvherre.pgsql
Backpatch-through: 15-18
This function called the resource-kind-specific ReleaseResource()
method for each item before deleting that item from the resowner.
That's backwards from the ordering in ResourceOwnerReleaseAllOfKind,
and it's not very safe. If ReleaseResource throws an error then the
subsequent abort cleanup will come back here and try to release that
item again, possibly leading to a double-free or similar crash,
and in any case risking an infinite error cleanup loop. This mistake
explains why the pgcrypto bug just fixed in 80bb0ebcc led to a crash
rather than something more benign.
Remove the item from the resowner, then call ReleaseResource,
matching the way things were done before b8bff07da. If there
is a problem of this sort, we'd prefer to leak the item than
suffer the other likely consequences.
Per further analysis of bug #19527.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/646741.1782157515@sss.pgh.pa.us
Backpatch-through: 17
Raising an error within a function using an OSSLCipher object led
to a complaint from ResourceOwnerForget and then a double-free crash,
because ResOwnerReleaseOSSLCipher forgot to unhook the OSSLCipher
object from its owner. (The sibling logic for OSSLDigest objects got
this right, as did every other ReleaseResource function AFAICS.)
Oversight in cd694f60d.
Bug: #19527
Reported-by: Yuelin Wang <3020001251@tju.edu.cn>
Author: Yuelin Wang <3020001251@tju.edu.cn>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/19527-6e7686960c6dce78@postgresql.org
Backpatch-through: 17
pg_mkdir_p creates each missing path component with a stat() followed
by mkdir(). If the stat() reports the component as absent but another
process creates it in the window before this process's mkdir(), mkdir()
fails with EEXIST and pg_mkdir_p treated that as a hard error -- unlike
"mkdir -p", which is meant to be idempotent and race-tolerant.
This shows up when several processes concurrently create paths that
share an ancestor directory: for example, parallel initdb runs whose
data directories live under a common temporary directory. One process
wins the race to create the shared ancestor and the others fail with
could not create directory "...": File exists
Fix this race condition by first trying mkdir() and only attempting
stat() if it fails with EEXIST.
On Windows, there's an additional problem: stat() opens a file handle
and participates in share-mode locking, which means it can transiently
fail on a directory another process is concurrently creating. Use
GetFileAttributes() instead: it requests only FILE_READ_ATTRIBUTES
and is exempt from share-mode denial, so it reliably sees a
concurrently-created directory.
I (tgl) also chose to back-patch 039f7ee0f's effects on this function,
so that pgmkdirp.c remains identical in all live branches.
Author: Andrew Dunstan <andrew@dunslane.net>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/3ca004de-e49b-4471-b8aa-fd656e70f68c@dunslane.net
Backpatch-through: 14
Newer gcc warns that this "actual_arg_types" variable may be used
uninitialized, but visual inspection indicates there's no bug. To
silence the warning, initialize the variable to zeros.
Bug: #19485
Reported-by: Hans Buschmann <buschmann@nidsa.net>
Tested-by: Erik Rijkers <er@xs4all.nl>
Tested-by: Hans Buschmann <buschmann@nidsa.net>
Reviewed-by: Tristan Partin <tristan@partin.io>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/19485-2b03231a775756f1%40postgresql.org
Discussion: https://postgr.es/m/6c52a1a6612948519468d46cb224a8c4%40nidsa.net
Add CHECK_FOR_INTERRUPTS() to the while loop in plperl_to_hstore()
that dereferences chains of Perl references, so that a circular
reference (e.g. $x = \$x) can be cancelled by the user instead of
spinning indefinitely. (We looked at detecting such circular
references, but it seems more trouble than it's worth.)
This is a follow-up to da82fbb8f, which fixed the same issue in
SV_to_JsonbValue() in jsonb_plperl.
Author: Aleksander Alekseev <aleksander@tigerdata.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAJ7c6TPbjkzUk4qJ5dHvDNEz0hBuFue3A-XWz_=897z+BC+z8A@mail.gmail.com
Backpatch-through: 14
Commit 6678b58d78 fixed a wrong "Prev" link by changing the link
generation code to use [position()=last()] instead of [last()] in
the predicate on the union of reverse axes. Unfortunately, that
caused documentation builds to take much longer. To fix, combine
the "preceding" and "ancestor" steps into one "preceding" step and
one "ancestor" step, and revert the predicate back to [last()].
The smaller union evades the libxml2 bug while avoiding the build
time regression.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Tested-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1132496.1781718007%40sss.pgh.pa.us
Backpatch-through: 14
As noted in the commit message of 850b9218c8, this function has gained
an extra called "missing_ok". All the callers of this routine should be
in core in the v15-v17 range. For v18, I have found one custom stats
kind that would be impacted by this change.
Discussion: https://postgr.es/m/ajOE3uRxVgSlPRcw@paquier.xyz
Backpatch-through: 15-18
drop_local_obsolete_slots() continued to dereference local_slot after
calling ReplicationSlotDropAcquired(). Once the slot is dropped, its
entry in the slot array can be reused by another backend, so later reads
of local_slot->data could observe a different slot's name or database
OID, leading to an incorrect unlock and log message.
Save the slot name and database OID before performing the drop, and use
the saved values for the subsequent UnlockSharedObject() call and the log
message. While at it, emit the "dropped replication slot" message only
when a slot was actually dropped, rather than unconditionally.
Author: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Backpatch-through: 17, where it was introduced
Discussion: https://postgr.es/m/TY4PR01MB177184FF9EE916F577E1F554194082@TY4PR01MB17718.jpnprd01.prod.outlook.com
pgstat_drop_entry_internal() generates an ERROR if facing a pgstats
entry already marked as dropped. With a workload doing a lot of
concurrent CALL and DROP/CREATE PROCEDURE, it could be possible for
AtEOXact_PgStat_DroppedStats(), that wants to do transactional drops, to
find entries that are already dropped, after a commit record has been
written. In this case, ERRORs are upgraded to PANIC, taking down the
server.
This issue is fixed by making pgstat_drop_entry() optionally more
tolerant to concurrent drops, adding to the routine a missing_ok option
to make some of its callers more tolerant (spoiler: some of the callers
want a strict behavior, like replication slots and backend stats).
pgstat_drop_entry_internal() cannot be called anymore for an entry
marked as dropped, hence its error is replaced by an assertion.
Functions are handled as a special case in core; this problem could also
apply to custom stats kinds depending on what an extension does.
track_functions is costly when enabled (disabled by default), which is
perhaps the main reason why this has not be found yet.
A similar version of this patch has been proposed by Sami Imseih on a
different thread for a feature in development. This version has tweaked
here by me for the sake of fixing this issue.
Reported-by: zhanglihui <zlh21343@163.com>
Author: Sami Imseih <samimseih@gmail.com>
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Ayush Tiwari <ayushtiwari.slg01@gmail.com>
Discussion: https://postgr.es/m/19520-73873648d44793cf@postgresql.org
Backpatch-through: 15
Add check_stack_depth() to Jsonb_to_SV, SV_to_JsonbValue,
PLyObject_FromJsonbContainer, and PLyObject_ToJsonbValue. Without
this, deeply nested JSONB values can crash the backend with SIGSEGV
instead of raising a proper error.
Also add CHECK_FOR_INTERRUPTS() to the while loop in SV_to_JsonbValue
that dereferences chains of Perl references, so that a circular
reference (e.g. $x = \$x) can be cancelled by the user instead of
spinning indefinitely. (We looked at detecting such circular
references, but it seems more trouble than it's worth.)
Author: Aleksander Alekseev <aleksander@tigerdata.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAJ7c6TPbjkzUk4qJ5dHvDNEz0hBuFue3A-XWz_=897z+BC+z8A@mail.gmail.com
Backpatch-through: 14
The test did not wait for the standby to be connected to the primary.
This breaks one assumption at the beginning of the test, where the
primary is stopped to ensure that all its records are flushed to both
standbys before moving on with its next steps.
If standby_1 finishes ahead of standby_2, the test would be able work
fine as the former waits for the latter. The opposite is not true,
standby_2 getting ahead of standby_1 would cause the test to fail on
timeout when standby_1 attempts to connect to standby_2.
This commit adds an additional polling query after the two standbys are
started, checking that both standbys are connected to the primary before
processing with the initial steps of the test.
Like 7185eddf05, backpatch down to v14.
Author: Sergey Tatarintsev <s.tatarintsev@postgrespro.ru>
Reviewed-by: Ewan Young <kdbase.hack@gmail.com>
Discussion: https://postgr.es/m/fea4190e-f8b5-4432-a52d-bcbee5f34366@postgrespro.ru
Backpatch-through: 14
The error path in ReorderBufferProcessTXN was not freeing
(reorderbuffer.c's representation of) a speculative insertion record
correctly. In assert-enabled builds, this leads to an assertion
failure. In production builds, I see no effect; there may be a small
transient leak, but in an improbable code path such as this, such a leak
is not of any significance. For users running with assertions enabled,
the crash is annoying.
Fix by having ReorderBufferProcessTXN() free the speculative insert
ahead of freeing the rest of the transaction, and no longer try to
handle that insert as a separate argument to ReorderBufferResetTXN().
This code came in with commit 7259736a6e (14-era). Backpatch all the
way back.
In branches 14-16, also backpatch the assertion that originally fails in
the problem scenario, which was added by dbed2e3662 (originally
backpatched to 17), that at the end of ReorderBufferReturnTXN() the
in-memory size of the transaction is zero.
Author: Vishal Prasanna <vishal.g@zohocorp.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Backpatch-through: 14
Discussion: https://postgr.es/m/19c7623e882.4080fd5426212.311756747309556767@zohocorp.com
The expression (len_diff * 10 * (an + 1)) used as the return value of
ltree_compare() is computed at int32 width. With LTREE_MAX_LEVELS =
65535, the product can exceed INT32_MAX once an ltree has more than
~14,653 levels, which causes the result to wrap and invert its sign.
That corrupts btree ordering as well as the "magnitude" consumed by
ltree_penalty() for GiST page splits.
To fix, split ltree_compare() into two functions. The new
ltree_compare_distance() function returns a float, which won't
overflow. It's used by the ltree_penalty() caller. All the other
callers only care about the sign of the return value, i.e. which of
the arguments is greater, so change ltree_compare() to not multiply
the result with (10 * (an + 1)), which avoids the overflow for those
callers.
Existing btree or GiST indexes on ltree columns containing values with
more than ~14,653 levels may be corrupt and should be REINDEXed.
Add a regression test based on the reporter's PoC.
Author: Ayush Tiwari <ayushtiwari.slg01@gmail.com>
Reported-by: 王跃林 <violin0613@tju.edu.cn>
Discussion: https://www.postgresql.org/message-id/AI6AnABgKW93Qbx1jVzi84r9.8.1781322625756.Hmail.3020001251%40tju.edu.cn
Backpatch-through: 14
Our handling of quoting within replication commands was pretty
sloppy, typically looking like
appendStringInfo(&cmd, " SLOT \"%s\"", options->slotname);
This is fine as long as options->slotname doesn't contain a double
quote mark, but what if it does? In principle this'd allow injection
of harmful options into replication commands, in the probably-unlikely
case that a slot name comes from untrustworthy input. We ought to
clean that up.
Moreover, even the places that were trying to be more careful
generally got it wrong, because they used quoting subroutines
intended for SQL commands rather than something that will work
with the replication-command scanner repl_scanner.l. For example,
several places naively use PQescapeLiteral() to quote option values
for replication commands. If the string contains a backslash,
PQescapeLiteral() will produce E'...' literal syntax, which
repl_scanner.l doesn't recognize. Another near miss was to use
quote_identifier() to quote identifiers. That function won't quote
valid lowercase identifiers unless they match SQL keywords ... but in
this context, replication keywords are what matter. Neither of these
errors seem to risk string injection, but they definitely can cause
syntax errors in replication commands that ought to be valid.
We can clean all this up by using simple quoting logic that just
doubles single or double quotes respectively.
Or at least, we could if repl_scanner.l handled doubled double quotes
in identifiers, but for some reason it doesn't! So the first step in
this fix has to be to fix that. (The fact that we'll later reject
slot names containing double quotes is very far short of justifying
this omission.)
Having done that, this patch runs around and applies correct
quoting in all places that generate replication commands containing
strings coming from outside the immediate context. Probably some
of these places are safe because of restrictions elsewhere, but it
seems best to just quote all the time.
This was originally reported as a security bug, which it could be
if replication slot names or parameters were to originate from
untrustworthy sources. But the security team concluded that that
was a very improbable situation, so we're just going to fix this
as a regular bug.
Reported-by: Team Dhiutsa
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Ayush Tiwari <ayushtiwari.slg01@gmail.com>
Discussion: https://postgr.es/m/1648659.1781287310@sss.pgh.pa.us
Backpatch-through: 14
Presently, the "Prev" link on the page for background workers sends
you to the middle of the previous chapter instead of the actual
previous page. This appears to be caused by a libxml2 bug, but
regardless, a minimal fix is to change the link generation code to
use [position()=last()] instead of [last()] in the predicate on the
union of reverse axes.
Reviewed-by: Ayush Tiwari <ayushtiwari.slg01@gmail.com>
Discussion: https://postgr.es/m/aim4AZorFKaC7Wrf%40nathan
Backpatch-through: 14
Late-model clang complains that these functions should be labeled
with "format(printf, 2, 3)", and it's right. But let's go a bit
further and also make use of varargs, to remove duplication and
allow these functions to be used with non-integer input values.
Since no good deed goes unpunished, I had to also adjust a couple
of call sites. They weren't wrong as-is, since the size_t-sized
arguments were coerced to int on the way into diag3(). But
without that, we have to adjust the format strings.
The point of this is to suppress compiler warnings, so back-patch
into branches containing pg_bsd_indent, even though there's no
functional change.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Ayush Tiwari <ayushtiwari.slg01@gmail.com>
Discussion: https://postgr.es/m/1645041.1781283554@sss.pgh.pa.us
Backpatch-through: 16
If a query has more than 7498 params, the ParameterDescription message
exceeds the 30000 byte limit on messages that are not specifically
marked as possibly being longer than that (VALID_LONG_MESSAGE_TYPE).
To fix, add ParameterDescription to the list.
Author: Ning Sun <classicning@gmail.com>
Discussion: https://www.postgresql.org/message-id/dbfb4b65-0aa8-470a-8b87-b6496160b28a@gmail.com
Backpatch-through: 14
This commit reduces the number of expected output files for the "xml"
test from three to two (well, mostly one, see below for details).
xml_2.out existed to handle some differences in output due to libxml2
2.9.3, due to some error context missing (085423e3e3). This file is
removed, by tweaking the XML inputs to trigger the same error patterns
for the problematic 2.9.3 and other libxml2 versions. This part is
authored by Tom Lane.
xml_1.out (no libxml2 support) is reduced in size by adding an \if query
that exits the test early. This still checks NO_XML_SUPPORT() through
xmlin(). The rest of the test is skipped if XML input cannot be
handled by the backend. This part has been written by me.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/aiu6CXO67q-s70n5@paquier.xyz
Backpatch-through: 14
Commit 2f70fdb06 removed the deprecated containment operator
~(aclitem[],aclitem) from the catalogs, but missed removing its entry
from the documentation. (Arguably the blame should fall on c62dd80cd,
which added this entry in contravention of the longstanding policy
that we don't document deprecated aliases in the first place.)
Author: Shinya Kato <shinya11.kato@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAOzEurQSyR5psWukyhUz1LtxyO55C2Vfp0Fmt8w2jGKxhszQmQ@mail.gmail.com
Backpatch-through: 14
bt_normalize_tuple() uses VARSIZE() to get the size of varlena, even though
it's not yet known, that it has a 4-byte header. Fix this by replacing a
accessor with a universal VARSIZE_ANY().
Backpatch to all supported versions.
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/7ckc7oka4bvafkf5bwlqs6ygrhlsbhz25ppozfch7zbuxcx3rf%40e4pr4oqenalc
Author: Andrey Borodin <x4mmm@yandex-team.ru>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Backpatch-through: 14
Commit 0e1f1ed157 taught seg_out() to print the certainty indicator
on an interval's upper boundary, but it was back-patched only as far
as v14. When upgrading from an older release, the old server prints
the one test_seg row exercising that case ('4.6 .. ~7.0') without the
indicator, so the pre- and post-upgrade dumps do not match. Make
AdjustUpgrade.pm delete just that row; seg's comparison function does
distinguish the certainty indicators, so the otherwise identical row
'4.6 .. 7.0' is unaffected.
Back-patch to all supported branches.
Per buildfarm members crake and fairywren.
Discussion: https://postgr.es/m/5ccbdbde-6467-4a10-bf4d-0be73a05ce8d@dunslane.net
OpenSSL 4.0.0 changed some parameters and returnvalues to const, so
we need to update our declarations and subsequently cast away const-
ness from a few callsites to make libpq build without warnings. This
is tested with OpenSSL 1.1.1 through 4.0.0 as well as with LibreSSL.
No functional change is introduced, this commit only allows postgres
to be compiled against OpenSSL 4.0.0 without warnings.
There is also an errormessage change in OpenSSL 4.0.0 which needed
to be covered by our testharness.
This will be backpatched to all supported branches since they are
all equally likely to be built against OpenSSL 4.0.0 as it becomes
available in distributions. Backpatching will be done once it has
been in master for a few days without issues.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/066B07BB-85FA-487C-BE8C-40F791CFC3C4@yesql.se
Backpatch-through: 14
read_local_xlog_page_guts has the same race as logical_read_xlog_page:
RecoveryInProgress() can return true during promotion, impacting the
availability of the operations doing WAL page reads with this callback.
This problem is similar to eb4e7224a1 that has addressed the issue for
logical replication, impacting more areas of the code where this WAL
page callback can be used (same narrow window during promotion, same
availability issue):
- pg_walinspect.
- Slot advance (SQL function).
- Slot creation.
Repack workers (v19~) and 2PC files (since forever) can also use this
callback, but they are irrelevant as far as I know. A test is added
with the SQL lookup functions. This part relies on injection points,
and is backpatched down to v18, like the test added for eb4e7224a1.
This issue could probably be fixed as well in v14 and v15 for
pg_walinspect. However, I also feel that there is a conservative
argument about consistency here due to the support of logical decoding
on standbys, so let's limit ourselves to v16 for now. pg_walinspect is
used less in the field compared to the two other operations, making
addressing this problem less attractive in these two older branches.
Reported-by: Xuneng Zhou <xunengzhou@gmail.com>
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Discussion: https://postgr.es/m/7daef094-abf3-4672-bc23-3df4763b16a3%40gmail.com
Backpatch-through: 16
Commit a70bce43fb added instructions on how to recover if PostgreSQL
refuses to issue new transaction IDs because of imminent wraparound,
but when describing how to find replication slots that should be dropped,
it referred to pg_stat_replication where it should have referenced
pg_replication_slots.
In passing, decorate references to views with <structname> tags.
Backpatch to all supported versions.
Reported-By: Sanjaya Waruna <sanjaya.waruna@gmail.com>
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Robert Treat <rob@xzilla.net>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/176767268098.1084085.10345048667224193115@wrigleys.postgresql.org
Backpatch-through: 14
xpath() attempted to call xmlCopyNode() and xmlNodeDump() on a
XML_NAMESPACE_DECL, finishing with a confusing error:
=# SELECT xpath('//namespace::foo', '<root xmlns:foo="http://127.0.0.1"/>');
ERROR: 53200: could not copy node
CONTEXT: SQL function "xpath" statement 1
xpath() is changed so as it goes through xmlXPathCastNodeToString()
instead, that is able to handle namespace nodes. xml2 uses the same
solution. This issue has been discovered while digging into
9d33a5a804.
Author: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/aioT7ui_ZJ9RMlfM@paquier.xyz
Backpatch-through: 14
transformJsonParseArg() was not careful enough on generation of
transformed expressions when starting from expressions that are not
coercible to text but are in the string type category: it failed to
verify that coerce_to_target_type() succeeds, and returned a NULL
pointer. This leads to a later NULL dereference and crash at executor
time.
This escaped noticed because it cannot happen for built-in types, all of
which have casts to text. Only user-created types are potentially
problematic.
Fix by raising an error when a cast to text doesn't exist.
This mistake came in with commit 6ee30209a6.
Author: Ayush Tiwari <ayushtiwari.slg01@gmail.com>
Reported-by: Chi Zhang <798604270@qq.com>
Reviewed-by: Srinath Reddy Sadipiralla <srinath2133@gmail.com>
Backpatch-through: 16
Discussion: https://postgr.es/m/19491-7aafc221ec63f288@postgresql.org
16b89ff048 has introduced this test, but I have missed that the script
should check for the existence of the test module injection_points.
This requirement has been added by 105b2cb336 in v18 and newer
branches.
Let's just remove the test on v17. There is still coverage in v18 and
HEAD, that should be good enough.
Per reports from the buildfarm.
Discussion: https://postgr.es/m/aiqFjzGHpnYFP-Gm@paquier.xyz
Backpatch-through: 17 (only)
When printing the upper boundary of a seg interval, seg_out() decided
whether to emit the certainty indicator ('<', '>' or '~') by testing the
upper indicator (u_ext) for '<' and '>', but mistakenly tested the lower
indicator (l_ext) for '~'. This is a copy-and-paste slip from the
symmetric code that prints the lower boundary a few lines above.
The consequences for valid input were:
* A '~' on the upper boundary was dropped on output, e.g.
'1.5 .. ~2.5'::seg printed as '1.5 .. 2.5'.
* When the lower boundary carried '~' but the upper boundary had no
indicator, the wrong test matched and sprintf(p, "%c", seg->u_ext)
wrote a NUL byte (u_ext == '\0'), which truncated the result string
and silently lost the entire upper boundary, e.g.
'~6.5 .. 8.5'::seg printed as '~6.5 .. '.
Certainty indicators are documented to be preserved on output (they are
ignored by the operators, but kept as comments), so this broke the
input/output round-trip for the affected values.
The bug has existed since seg was added. It went unnoticed because the
existing regression tests only exercised certainty indicators on
single-point segs, which are printed by a different branch of seg_out().
Add tests that place indicators on both boundaries of an interval.
Author: Ewan Young <kdbase.hack@gmail.com>
Discussion: https://www.postgresql.org/message-id/CAON2xHPYeRRCEVAv8XfE18KsEsEHCiYcJ5fOsoxFuMEfpxF1=g@mail.gmail.com
Backpatch-through: 14
During promotion, there is a window where RecoveryInProgress() returns
true but the WAL segments of the old timeline have already been removed.
A logical decoding could pick up the old timeline in this window when
reading a page, failing with the following error:
ERROR: requested WAL segment ... has already been removed
This issue does not lead to any data correctness issue, as retrying to
decode the data works in follow-up decoding attempts. It impacts
availability, though. Other WAL page read callbacks have a similar
issue, this commit takes care of what should be the noisiest code path:
logical decoding with START_REPLICATION in a WAL sender.
A TAP test, based on an injection point waiting in the startup process
after the segments have been removed/recycled, is added. This part is
backpatched down to v17.
This issue has been causing sporadic failures in the buildfarm, and
was reproducible manually. This issue happens since logical decoding on
standbys exists, down to v16.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/7daef094-abf3-4672-bc23-3df4763b16a3@gmail.com
Backpatch-through: 16
pgxmlNodeSetToText() passed nodeTab[i]->doc to xmlNodeDump() without
checking the node type, which could cause a crash as a
XML_NAMESPACE_DECL maps to a xmlNs struct. The passed-in code would
then be dereferenced in xmlNodeDump().
This commit switches the code to render XML_NAMESPACE_DECL nodes with
xmlXPathCastNodeToString(), like xpath_table(). Some tests are added,
written by me.
Author: Andrey Chernyy <andrey.cherny@tantorlabs.com>
Co-authored-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20260611031436.5afde3cb@andrnote
Backpatch-through: 14
Commit 85c17f6 mistakenly declared a variable storing catalog_xmin as
XLogRecPtr, even though catalog_xmin is a TransactionId.
This caused no functional issue, but the type was clearly incorrect.
Therefore, this commit fixes it to use the correct type TransactionId
instead, and backpatch to v17 where the issue was introduced.
Author: Imran Zaheer <imran.zhir@gmail.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CA+UBfa=mNeLt-4BFjEP4tqdDsnq+oMqqPr7fd9Wji2_9YXmQdA@mail.gmail.com
Strings built by this function are not supposed to be subject to
NLS translation, but commit 6566133c5 missed that memo, so that
object identities like "membership of role %s in role %s" were
translated.
Previously, outlen was miscalculated if case_sensitive was false and
str_tolower() changed the byte length of the string. If outlen was too
large, pnstrdup() would stop at the NUL terminator, preventing
overrun. But if outlen was too small, it would cause truncation.
Fix by just removing outlen. It was only used in a single site, which
could just as well use pstrdup().
Discussion: https://postgre.es/m/1101e1a3afbbabb503317069c40374b82e6f4cac.camel@j-davis.com
Reviewed-by: Tristan Partin <tristan@partin.io>
Backpatch-through: 14
The operators for array_eq, record_eq, range_eq, and multirange_eq
are all marked oprcanhash, but there's a pitfall: their hash functions
can fail at runtime if the contained type(s) are not hashable.
Therefore, the planner has to check hashability of the contained types
before deciding it can use hashing in these cases. Not every place
had gotten this memo, and noplace at all had considered the issue
for ranges or multiranges. In particular we could attempt to use
hashing for a ScalarArrayOpExpr on a container type when it won't
actually work, leading to "could not identify a hash function ..."
runtime failures.
For the most part we should fix this in the lookup functions provided
by lsyscache.c, to wit get_op_hash_functions and op_hashjoinable.
But there's a problem: get_op_hash_functions is not passed the input
data type it would need to check. We mustn't change the API of that
exported function in a back-patched fix, and even if we wanted to,
its call sites in the executor mostly don't have easy access to the
required data type OID. Fortunately, the executor call sites don't
actually need fixing, because it's expected that the planner verified
hashability before building a plan that requires it. Therefore,
leave get_op_hash_functions as-is and invent a wrapper function
get_op_hash_functions_ext that does the additional checking needed
in the planner's uses.
We also need to fix hash_ok_operator (extending the fix in 647889667).
While at it, neaten up a couple of places in lookup_type_cache where
relevant code for multirange cases was written differently from the
code for other container types.
Note: while this touches pg_operator.dat, it's only to add oid_symbol
macros. So there's no on-disk data change and no need for a
catversion bump.
Reported-by: Andrei Lepikhov <lepihov@gmail.com>
Author: Andrei Lepikhov <lepihov@gmail.com>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/ed221f95-f09b-4a9c-b05b-e1fed621ec87@gmail.com
Backpatch-through: 14
The security team has received a couple of reports about potential
SQL injection via refint's trigger arguments. We discussed this
while preparing CVE-2026-6637 and concluded that forcibly quoting
these arguments is more likely to break working code than to
prevent exploits. Unlike data values, the table/column names come
from trigger arguments, and there is little reason for a trigger
author to put hostile inputs into those arguments. So, let's
document it accordingly.
Reported-by: Nikolay Samokhvalov <nik@postgres.ai>
Reported-by: Alex Young <alex000young@gmail.com>
Reported-by: Satyanarayana Narlapuram <satyanarlapuram@gmail.com>
Suggested-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Christoph Berg <myon@debian.org>
Reviewed-by: Satyanarayana Narlapuram <satyanarlapuram@gmail.com>
Discussion: https://postgr.es/m/ahXP7z7nsfGPOZ3T%40nathan
Backpatch-through: 14
Previously, ecpg accepted multiple descriptor header items in GET DESCRIPTOR
and SET DESCRIPTOR, but generated broken C code when they were used.
Although the grammar allowed this syntax, the implementation did not actually
support it.
This commit tightens the ecpg grammar so the header form of GET/SET DESCRIPTOR
accepts only a single header item, matching the implementation and preventing
generation of broken C code.
Also update the documentation synopsis accordingly.
Backpatch to all supported versions.
Author: Masashi Kamura <kamura.masashi@fujitsu.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Lakshmi G <lakshmigcdac@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/OS9PR01MB13174AD7D1829D0644B6BB90E9447A@OS9PR01MB13174.jpnprd01.prod.outlook.com
Backpatch-through: 14
When called from a parallel worker, this function calls initStringInfo()
and pq_beginmessage(), causing a StringInfo allocation to happen twice.
pq_endmessage() frees only the second allocation, with each call leaking
~1 kB into the per-worker memory context. This could cause a few
hundred megabytes worth of memory to pile up until the worker exits (the
message allocations happen in the parallel worker context), with the
situation being worse the longer a parallel worker runs.
Oversight in f1889729dd.
Author: Baji Shaik <baji.pgdev@gmail.com>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Tristan Partin <tristan@partin.io>
Discussion: https://postgr.es/m/CA+fm-RMopta1Dmq8udiU5sp+zwTvhUf4+xfbr3rZDfczH+p-xw@mail.gmail.com
Backpatch-through: 17
When a table's columns are narrower than the record header line, the
expanded aligned format produced misaligned output because the data
column width was not adjusted to match the record header width, leading
to output like:
+-[ RECORD 1 ]-+
| a | 10 |
| b | 20 |
+---+----+
This commit adjusts the output so as the column width match with the
header line, giving:
+-[ RECORD 1 ]-+
| a | 10 |
| b | 20 |
+---+----------+
Author: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/CAFj8pRCzGpsr9zTHbtTd4mGh2YPJqOEgLgt8JLiopuYA9_1xGw@mail.gmail.com
Backpatch-through: 14
Before v17, WAL senders can shut down after the checkpointer. If a WAL
sender still has pending statistics when the checkpointer has already
exited, its shutdown callback may attempt to report those statistics and
trigger assertions in pgstats. In that case, the pending statistics are
lost.
This commit adjusts the assertion handling so that attempts to report
pending WAL sender statistics after the checkpointer has completed its
final stats flush are skipped.
Preserving the existing assertion would require backpatching an
equivalent of 87a6690cc6, ensuring that the checkpointer is always the
last process to exit. Such a change would be considerably more invasive
and risky for stable branches because it alters the shutdown sequence,
and the consequence is only some loss of stats data for the WAL sender.
This assertion failure was periodically detected in the buildfarm,
leading to spurious failures.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/18158-88f667028dbc7e7b@postgresql.org
Backpatch-through: 15-17
