libpq's pqTraceOutputMessage() used to look like this:
case 'Z': /* Ready For Query */
pqTraceOutputZ(conn->Pfdebug, message, &logCursor);
break;
Commit f4b54e1ed9 introduced macros for protocol characters, so now
it looks like this:
case PqMsg_ReadyForQuery:
pqTraceOutputZ(conn->Pfdebug, message, &logCursor);
break;
But this introduced a disconnect between the symbol in the switch case
and the function name to be called, so this made the manageability of
this file a bit worse.
This patch changes the function names to match, so now it looks like
this:
case PqMsg_ReadyForQuery:
pqTraceOutput_ReadyForQuery(conn->Pfdebug, message, &logCursor);
break;
(This also improves the readability of the file in general, since some
function names like "pqTraceOutputt" were a little hard to read
accurately.)
Some protocol characters have different meanings to and from the
server. The old code structure had a common function for both, for
example, pqTraceOutputD(). The new structure splits this up into
separate ones to match the protocol message name, like
pqTraceOutput_Describe() and pqTraceOutput_DataRow().
Reviewed-by: Yugo NAGATA <nagata@sraoss.co.jp>
Discussion: https://www.postgresql.org/message-id/flat/575e4f9d-acfe-45e3-b7f1-7e32c579090e%40eisentraut.org
If the client supports ALPN but tries to use some other protocol, like
HTTPS, reject the connection in the server. That is surely a confusion
of some sort. Furthermore, the ALPN RFC 7301 says:
> In the event that the server supports no protocols that the client
> advertises, then the server SHALL respond with a fatal
> "no_application_protocol" alert.
This commit makes the server follow that advice.
In the client, specifically check for the OpenSSL error code for the
"no_application_protocol" alert. Otherwise you got a cryptic "SSL
error: SSL error code 167773280" error if you tried to connect to a
non-PostgreSQL server that rejects the connection with
"no_application_protocol". ERR_reason_error_string() returns NULL for
that code, which frankly seems like an OpenSSL bug to me, but we can
easily print a better message ourselves.
Reported-by: Jacob Champion
Discussion: https://www.postgresql.org/message-id/6aedcaa5-60f3-49af-a857-2c76ba55a1f3@iki.fi
These messages were lost in commit 05fd30c0e7. Put them back.
This makes one change in the error message behavior compared to v16,
in the case that the server responds to GSSRequest with an error
instead of rejecting it with 'N'. Previously, libpq would hide the
error that the server sent, assuming that you got the error because
the server is an old pre-v12 version that doesn't understand the
GSSRequest message. A v11 server sends a "FATAL: unsupported frontend
protocol 1234.5680: server supports 2.0 to 3.0" error if you try to
connect to it with GSS. That was a reasonable assumption when the
feature was introduced, but v12 was released a long time ago and I
don't think it's the most probable cause anymore. The attached patch
changes things so that libpq prints the error message that the server
sent in that case, making the "server responds with error to
GSSRequest" case behave the same as the "server responds with error to
SSLRequest" case.
Reported-by: Peter Eisentraut
Discussion: https://www.postgresql.org/message-id/bb3b94da-afc7-438d-8940-cb946e553d9d@eisentraut.org
The ECPG and main 2PC tests have been using rather-generic names for the
prepared transactions they generate. This commit switches the 2PC
transactions to use more complex GIDs, reducing the risk of naming
conflicts.
The main 2PC tests also include scans of pg_prepared_xacts that do not
apply filters on the GID of the prepared transactions, making it
possible to fail the test when any 2PC transaction runs concurrently.
The CI has been able to see such failures with an installcheck
running the ECPG and the main regression test suites in parallel. The
queries on pg_prepared_xacts gain quals to only look after the GIDs
generated locally.
The race is very hard to reproduce, so no backbatch is done for now.
Reported-by: Richard Guo
Discussion: https://postgr.es/m/CAMbWs4-mWCGbbE_bne5=AfqjYGDaUZmjCw2+soLjrdNA0xUDFw@mail.gmail.com
The documentation says that PQsslAttribute(conn, "alpn") returns an
empty string if ALPN is not used, but the code actually returned
NULL. Fix the code to match the documentation.
Reported-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/ZideNHji0G4gxmc3@paquier.xyz
The paragraph in the docs and the comment applied to
sslnegotiaton=direct, but not sslnegotiation=requiredirect. In
'requiredirect' mode, negotiated SSL is never used. Move the paragraph
in the docs under the description of 'direct' mode, and rephrase it.
Also the comment's reference to reusing a plaintext connection was
bogus. Authentication failure in plaintext mode only happens after
sending the startup packet, so the connection cannot be reused.
Reported-by: Jacob Champion
Discussion: https://www.postgresql.org/message-id/CAOYmi+=sj+1uydS0NR4nYzw-LRWp3Q-s5speBug5UCLSPMbvGA@mail.gmail.com
HAVE_LONG_LONG_INT was not added to ecpg_config.h.in by the meson
build system, but rather than add it there, we decided to remove it
from the makefile build system, to make both consistent that way.
There is no documentation or examples that suggest that the presence
of this symbol was publicly advertised, and of course the feature is
required by C99 (but we don't necessarily require C99 for ecpg user
code). ecpg core code and ecpg tests use the symbol
HAVE_LONG_LONG_INT_64 instead, which is still there.
Discussion: https://www.postgresql.org/message-id/flat/bf35d032-02fc-4173-9f4f-840999cc3ef3%40eisentraut.org
The function declaration for select_next_encryption_method use the
variable name have_valid_connection, so fix the prototype in the
header to match that.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/3F577953-A29E-4722-98AD-2DA9EFF2CBB8@yesql.se
This fixes various typos, duplicated words, and tiny bits of whitespace
mainly in code comments but also in docs.
Author: Daniel Gustafsson <daniel@yesql.se>
Author: Heikki Linnakangas <hlinnaka@iki.fi>
Author: Alexander Lakhin <exclusion@gmail.com>
Author: David Rowley <dgrowleyml@gmail.com>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/3F577953-A29E-4722-98AD-2DA9EFF2CBB8@yesql.se
The code associated with EXEC SQL DEFINE was unreadable and full of
bugs, notably:
* It'd attempt to free a non-malloced string if the ecpg program
tries to redefine a macro that was defined on the command line.
* Possible memory stomp if user writes "-D=foo".
* Undef'ing or redefining a macro defined on the command line would
change the state visible to the next file, when multiple files are
specified on the command line. (While possibly that could have been
an intentional choice, the code clearly intends to revert to the
original macro state; it's just failing to consider this interaction.)
* Missing "break" in defining a new macro meant that redefinition
of an existing name would cause an extra entry to be added to the
definition list. While not immediately harmful, a subsequent undef
would result in the prior entry becoming visible again.
* The interactions with input buffering are subtle and were entirely
undocumented.
It's not that surprising that we hadn't noticed these bugs,
because there was no test coverage at all of either the -D
command line switch or multiple input files. This patch adds
such coverage (in a rather hacky way I guess).
In addition to the code bugs, the user documentation was confused
about whether the -D switch defines a C macro or an ecpg one, and
it failed to mention that you can write "-Dsymbol=value".
These problems are old, so back-patch to all supported branches.
Discussion: https://postgr.es/m/998011.1713217712@sss.pgh.pa.us
Coverity pointed out that the function checks for conn->sslmode !=
NULL, which implies that it might be NULL, but later we access it
without a NULL-check anyway. It doesn't know that it is in fact always
initialized earlier, in conninfo_add_defaults(), and hence the
NULL-check is not necessary. However, there is a lot of distance
between conninfo_add_defaults() and pqConnectOptions2(), so it's not
surprising that it doesn't see that. Put back the initialization code,
as it existed before commit 05fd30c0e7, to silence the warning.
In the long run, I'd like to refactor the libpq options handling and
initalization code. It seems silly to strdup() and copy strings, for
things like sslmode that have a limited set of possible values; it
should be an enum. But that's for another day.
In the libpq encryption negotiation tests, don't run the GSSAPI tests
unless PG_TEST_EXTRA='kerberos' is also set. That makes it possible to
still run most of the tests when GSSAPI support is compiled in, but
there's no MIT Kerberos installation.
The test targets libpq's options, so 'src/test/interfaces/libpq/t' is
a more natural place for it.
While doing this, I noticed that I had missed adding the
libpq_encryption subdir to the Makefile. That's why this commit only
needs to remove it from the meson.build file.
Per Peter Eisentraut's suggestion.
Discussion: https://www.postgresql.org/message-id/09d4bf5d-d0fa-4c66-a1d7-5ec757609646@eisentraut.org
A NESTED path allows to extract data from nested levels of JSON
objects given by the parent path expression, which are projected as
columns specified using a nested COLUMNS clause, just like the parent
COLUMNS clause. Rows comprised from a NESTED columns are "joined"
to the row comprised from the parent columns. If a particular NESTED
path evaluates to 0 rows, then the nested COLUMNS will emit NULLs,
making it an OUTER join.
NESTED columns themselves may include NESTED paths to allow
extracting data from arbitrary nesting levels, which are likewise
joined against the rows at the parent level.
Multiple NESTED paths at a given level are called "sibling" paths
and their rows are combined by UNIONing them, that is, after being
joined against the parent row as described above.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Jian He <jian.universality@gmail.com>
Reviewers have included (in no particular order):
Andres Freund, Alexander Korotkov, Pavel Stehule, Andrew Alsup,
Erik Rijkers, Zihong Yu, Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby, Álvaro Herrera, Jian He
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
libpq now always tries to send ALPN. With the traditional negotiated
SSL connections, the server accepts the ALPN, and refuses the
connection if it's not what we expect, but connecting without ALPN is
still OK. With the new direct SSL connections, ALPN is mandatory.
NOTE: This uses "TBD-pgsql" as the protocol ID. We must register a
proper one with IANA before the release!
Author: Greg Stark, Heikki Linnakangas
Reviewed-by: Matthias van de Meent, Jacob Champion
By skipping SSLRequest, you can eliminate one round-trip when
establishing a TLS connection. It is also more friendly to generic TLS
proxies that don't understand the PostgreSQL protocol.
This is disabled by default in libpq, because the direct TLS handshake
will fail with old server versions. It can be enabled with the
sslnegotation=direct option. It will still fall back to the negotiated
TLS handshake if the server rejects the direct attempt, either because
it is an older version or the server doesn't support TLS at all, but
the fallback can be disabled with the sslnegotiation=requiredirect
option.
Author: Greg Stark, Heikki Linnakangas
Reviewed-by: Matthias van de Meent, Jacob Champion
This fixes the few corner cases noted in commit 705843d294, as shown
by the changes in the test.
Author: Heikki Linnakangas, Matthias van de Meent
Reviewed-by: Jacob Champion
Previously, libpq would establish the TCP connection, and then
immediately disconnect if the credentials were not available. The
same thing happened if you tried to use a Unix domain socket with
gssencmode=require. Check those conditions before establishing the TCP
connection.
This is a very minor issue, but my motivation to do this now is that
I'm about to add more detail to the tests for encryption negotiation.
This makes the case of gssencmode=require but no credentials
configured fail at the same stage as with gssencmode=require and
GSSAPI support not compiled at all. That avoids having to deal with
variations in expected output depending on build options.
Discussion: https://www.postgresql.org/message-id/CAEze2Wja8VUoZygCepwUeiCrWa4jP316k0mvJrOW4PFmWP0Tcw@mail.gmail.com
This patch generalizes libpq's existing single-row mode to allow
individual partial-result PGresults to contain up to N rows, rather
than always one row. This reduces malloc overhead compared to plain
single-row mode, and it is very useful for psql's FETCH_COUNT feature,
since otherwise we'd have to add code (and cycles) to either merge
single-row PGresults into a bigger one or teach psql's
results-printing logic to accept arrays of PGresults.
To avoid API breakage, PQsetSingleRowMode() remains the same, and we
add a new function PQsetChunkedRowsMode() to invoke the more general
case. Also, PGresults obtained the old way continue to carry the
PGRES_SINGLE_TUPLE status code, while if PQsetChunkedRowsMode() is
used then their status code is PGRES_TUPLES_CHUNK. The underlying
logic is the same either way, though.
Daniel Vérité, reviewed by Laurenz Albe and myself (and whacked
around a bit by me, so any remaining bugs are my fault)
Discussion: https://postgr.es/m/CAKZiRmxsVTkO928CM+-ADvsMyePmU3L9DQCa9NwqjvLPcEe5QA@mail.gmail.com
ecpg wants to emit a warning if it parses a SQL construct that the
backend can parse but will immediately throw a FEATURE_NOT_SUPPORTED
error for. The way it was testing for this was to see if the string
ERRCODE_FEATURE_NOT_SUPPORTED appeared anywhere in the gram.y code.
This is, of course, not nearly good enough, as there are plenty of
rules in gram.y that throw that error only conditionally. There was
a hack dating to 2008 to suppress the warning in one rule that
doesn't even exist anymore, but nothing for other cases we've created
since then. End result was that you could get "unsupported feature
will be passed to server" warnings while compiling perfectly good SQL
code in ecpg. Somehow we'd not heard complaints about this, but
it was exposed by the recent addition of an ecpg test for a SQL/JSON
construct.
To fix, suppress the warning if the rule contains any "if" statement.
Manual comparison of gram.y with the generated preproc.y file shows
that the warning is now emitted only in rules where it's sensible.
This problem has existed for a long time, so back-patch to all
supported branches.
Discussion: https://postgr.es/m/603615.1712245382@sss.pgh.pa.us
Add overlooked .gitignore entries.
Fix test_json_parser/Makefile to use the pgxs.mk clean rule
instead of fighting it. Suppresses a warning from make,
at least for me.
JSON_TABLE() allows JSON data to be converted into a relational view
and thus used, for example, in a FROM clause, like other tabular
data. Data to show in the view is selected from a source JSON object
using a JSON path expression to get a sequence of JSON objects that's
called a "row pattern", which becomes the source to compute the
SQL/JSON values that populate the view's output columns. Column
values themselves are computed using JSON path expressions applied to
each of the JSON objects comprising the "row pattern", for which the
SQL/JSON query functions added in 6185c9737c are used.
To implement JSON_TABLE() as a table function, this augments the
TableFunc and TableFuncScanState nodes that are currently used to
support XMLTABLE() with some JSON_TABLE()-specific fields.
Note that the JSON_TABLE() spec includes NESTED COLUMNS and PLAN
clauses, which are required to provide more flexibility to extract
data out of nested JSON objects, but they are not implemented here
to keep this commit of manageable size.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Jian He <jian.universality@gmail.com>
Reviewers have included (in no particular order):
Andres Freund, Alexander Korotkov, Pavel Stehule, Andrew Alsup,
Erik Rijkers, Zihong Yu, Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby, Álvaro Herrera, Jian He
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
This is useful when connecting to a database asynchronously via
PQconnectStart(), since it handles deciding between poll() and
select(), and some of the required boilerplate.
Tristan Partin, reviewed by Gurjeet Singh, Heikki Linnakangas, Jelte
Fennema-Nio, and me.
Discussion: http://postgr.es/m/D08WWCPVHKHN.3QELIKZJ2D9RZ@neon.tech
If we are building with openssl but USE_SSL_ENGINE didn't get set,
initialize_SSL's variable "pkey" is declared but used nowhere.
Apparently this combination hasn't been exercised in the buildfarm
before now, because I've not seen this warning before, even though
the code has been like this a long time. Move the declaration
to silence the warning (and remove its useless initialization).
Per buildfarm member sawshark. Back-patch to all supported branches.
The decimal conversion functions dectoint and dectolong are documented
to return ECPG_INFORMIX_NUM_OVERFLOW in case of overflows, but always
returned -1 on all errors due to incorrectly checking the returnvalue
from the PGTYPES* functions.
Author: Aidar Imamov <a.imamov@postgrespro.ru>
Discussion: https://postgr.es/m/54d2b53327516d9454daa5fb2f893bdc@postgrespro.ru
This refactors the SASL init flow to set password_needed on the two
SCRAM exchanges currently supported. The code already required this
but was set up in such a way that all SASL exchanges required using
a password, a restriction which may not hold for all exchanges (the
example at hand being the proposed OAuthbearer exchange).
This was extracted from a larger patchset to introduce OAuthBearer
authentication and authorization.
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Discussion: https://postgr.es/m/d1b467a78e0e36ed85a09adf979d04cf124a9d4b.camel@vmware.com
The SASL exchange callback returned state in to output variables:
done and success. This refactors that logic by introducing a new
return variable of type SASLStatus which makes the code easier to
read and understand, and prepares for future SASL exchanges which
operate asynchronously.
This was extracted from a larger patchset to introduce OAuthBearer
authentication and authorization.
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Discussion: https://postgr.es/m/d1b467a78e0e36ed85a09adf979d04cf124a9d4b.camel@vmware.com
This introduces the following SQL/JSON functions for querying JSON
data using jsonpath expressions:
JSON_EXISTS(), which can be used to apply a jsonpath expression to a
JSON value to check if it yields any values.
JSON_QUERY(), which can be used to to apply a jsonpath expression to
a JSON value to get a JSON object, an array, or a string. There are
various options to control whether multi-value result uses array
wrappers and whether the singleton scalar strings are quoted or not.
JSON_VALUE(), which can be used to apply a jsonpath expression to a
JSON value to return a single scalar value, producing an error if it
multiple values are matched.
Both JSON_VALUE() and JSON_QUERY() functions have options for
handling EMPTY and ERROR conditions, which can be used to specify
the behavior when no values are matched and when an error occurs
during jsonpath evaluation, respectively.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Author: Jian He <jian.universality@gmail.com>
Reviewers have included (in no particular order):
Andres Freund, Alexander Korotkov, Pavel Stehule, Andrew Alsup,
Erik Rijkers, Zihong Yu, Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby, Álvaro Herrera, Jian He, Anton A. Melnikov,
Nikita Malakhov, Peter Eisentraut, Tomas Vondra
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqHROpf9e644D8BRqYvaAPmgBZVup-xKMDPk-nd4EpgzHw@mail.gmail.com
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
The existing PQcancel API uses blocking IO, which makes PQcancel
impossible to use in an event loop based codebase without blocking the
event loop until the call returns. It also doesn't encrypt the
connection over which the cancel request is sent, even when the original
connection required encryption.
This commit adds a PQcancelConn struct and assorted functions, which
provide a better mechanism of sending cancel requests; in particular all
the encryption used in the original connection are also used in the
cancel connection. The main entry points are:
- PQcancelCreate creates the PQcancelConn based on the original
connection (but does not establish an actual connection).
- PQcancelStart can be used to initiate non-blocking cancel requests,
using encryption if the original connection did so, which must be
pumped using
- PQcancelPoll.
- PQcancelReset puts a PQcancelConn back in state so that it can be
reused to send a new cancel request to the same connection.
- PQcancelBlocking is a simpler-to-use blocking API that still uses
encryption.
Additional functions are
- PQcancelStatus, mimicks PQstatus;
- PQcancelSocket, mimicks PQcancelSocket;
- PQcancelErrorMessage, mimicks PQerrorMessage;
- PQcancelFinish, mimicks PQfinish.
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Denis Laxalde <denis.laxalde@dalibo.com>
Discussion: https://postgr.es/m/AM5PR83MB0178D3B31CA1B6EC4A8ECC42F7529@AM5PR83MB0178.EURPRD83.prod.outlook.com
Most callers of strerror() are removed from the backend code. The
remaining callers require special handling with a saved errno from a
previous system call. The frontend code still needs strerror() where
error states need to be handled outside of fprintf.
Note that pg_regress is not changed to use %m as the TAP output may
clobber errno, since those functions call fprintf() and friends before
evaluating the format string.
Support for %m in src/port/snprintf.c has been added in d6c55de1f9,
hence all the stable branches currently supported include it.
Author: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/87sf13jhuw.fsf@wibble.ilmari.org
The list of connection statuses that PQstatus might return during an
asynchronous connection attempt was outdated:
1. CONNECTION_SETENV is never returned anymore and is only part of the
enum for backwards compatibility, so remove it from the docs.
2. CONNECTION_CHECK_STANDBY and CONNECTION_GSS_STARTUP were not listed,
so add them.
CONNECTION_NEEDED and CONNECTION_CHECK_TARGET are not listed in the docs
on purpose, since these are internal states that can never be observed
by a caller of PQstatus.
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Discussion: https://postgr.es/m/CAGECzQRb21spiiykQ48rzz8w+Hcykz+mB2_hxR65D9Qk6nnw=w@mail.gmail.com
In OpenSSL 3.0.0 and later, ERR_reason_error_string randomly refuses
to provide a string for error codes representing system errno values
(e.g., "No such file or directory"). There is a poorly-documented way
to extract the errno from the SSL error code in this case, so do that
and apply strerror, rather than falling back to reporting the error
code's numeric value as we were previously doing.
Problem reported by David Zhang, although this is not his proposed
patch; it's instead based on a suggestion from Heikki Linnakangas.
Back-patch to all supported branches, since any of them are likely
to be used with recent OpenSSL.
Discussion: https://postgr.es/m/b6fb018b-f05c-4afd-abd3-318c649faf18@highgo.ca
There isn't a lot of user demand for AIX support, we have a bunch of
hacks to work around AIX-specific compiler bugs and idiosyncrasies,
and no one has stepped up to the plate to properly maintain it.
Remove support for AIX to get rid of that maintenance overhead. It's
still supported for stable versions.
The acute issue that triggered this decision was that after commit
8af2565248, the AIX buildfarm members have been hitting this
assertion:
TRAP: failed Assert("(uintptr_t) buffer == TYPEALIGN(PG_IO_ALIGN_SIZE, buffer)"), File: "md.c", Line: 472, PID: 2949728
Apperently the "pg_attribute_aligned(a)" attribute doesn't work on AIX
for values larger than PG_IO_ALIGN_SIZE, for a static const variable.
That could be worked around, but we decided to just drop the AIX support
instead.
Discussion: https://www.postgresql.org/message-id/20240224172345.32@rfd.leadboat.com
Reviewed-by: Andres Freund, Noah Misch, Thomas Munro
intoasc(), a wrapper for PGTYPESinterval_to_asc that converts an
interval to its textual representation, used a plain memcpy() when
copying its result. This could miss a zero-termination in the result
string, leading to an incorrect result.
The routines in informix.c do not provide the length of their result
buffer, which would allow a replacement of strcpy() to safer strlcpy()
calls, but this requires an ABI breakage and that cannot happen in
back-branches.
Author: Oleg Tselebrovskiy
Reviewed-by: Ashutosh Bapat
Discussion: https://postgr.es/m/bf47888585149f83b276861a1662f7e4@postgrespro.ru
Backpatch-through: 12
pgtypes_alloc() can return NULL when failing an allocation, which is
something that PGTYPEStimestamp_defmt_asc() has forgotten about when
translating a timestamp for 'D', 'r', 'R' and 'T' as these require a
temporary allocation.
This is unlikely going to be a problem in practice, so no backpatch is
done.
Author: Oleg Tselebrovskiy
Discussion: https://postgr.es/m/bf47888585149f83b276861a1662f7e4@postgrespro.ru
We previously supposed that it was okay for different threads to
call bindtextdomain() concurrently (cf. commit 1f655fdc3).
It now emerges that there's at least one gettext implementation
in which that triggers an abort() crash, so let's stop doing that.
Add mutexes guarding libpq's and ecpglib's calls, which are the
only ones that need worry about multithreaded callers.
Note: in libpq, we could perhaps have piggybacked on
default_threadlock() to avoid defining a new mutex variable.
I judge that not terribly safe though, since libpq_gettext could
be called from code that is holding the default mutex. If that
were the first such call in the process, it'd fail. An extra
mutex is cheap insurance against unforeseen interactions.
Per bug #18312 from Christian Maurer. Back-patch to all
supported versions.
Discussion: https://postgr.es/m/18312-bbbabc8113592b78@postgresql.org
Discussion: https://postgr.es/m/264860.1707163416@sss.pgh.pa.us
Fix pthread-win32.h and pthread-win32.c to provide a more complete
emulation of POSIX pthread mutexes: define PTHREAD_MUTEX_INITIALIZER
and make sure that pthread_mutex_lock() can operate on a mutex
object that's been initialized that way. Then we don't need the
duplicative platform-specific logic in default_threadlock() and
pgtls_init(), which we'd otherwise need yet a third copy of for
an upcoming bug fix.
Also, since default_threadlock() supposes that pthread_mutex_lock()
cannot fail, try to ensure that that's actually true, by getting
rid of the malloc call that was formerly involved in initializing
an emulated mutex. We can define an extra state for the spinlock
field instead.
Also, replace the similar code in ecpglib/misc.c with this version.
While ecpglib's version at least had a POSIX-compliant API, it
also had the potential of failing during mutex init (but here,
because of CreateMutex failure rather than malloc failure). Since
all of misc.c's callers ignore failures, it seems like a wise idea
to avoid failures here too.
A further improvement in this area could be to unify libpq's and
ecpglib's implementations into a src/port/pthread-win32.c file.
But that doesn't seem like a bug fix, so I'll desist for now.
In preparation for the aforementioned bug fix, back-patch to all
supported branches.
Discussion: https://postgr.es/m/264860.1707163416@sss.pgh.pa.us
When building libpq there is a check to ensure that we're not
linking against code that calls exit(). This check is using a
heuristic grep with exclusions for known false positives. The
Threadsanitizer library instrumentation for function exits is
named such that it triggers the check, so add an exclusion.
This fix is only applied to the Makefile since the meson build
files don't yet have this check. Adding the check to meson is
outside the scope of this patch though.
Reported-by: Roman Lozko <lozko.roma@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAEhC_BmNGKgj2wKArH2EAU11BsaHYgLnrRFJGRm5Vs8WJzyiQA@mail.gmail.com
In follow up commits we'll add more functions related to query
cancellations. This groups those all together instead of mixing them
with the other functions in fe-connect.c.
The formerly static parse_int_param() function had to be exported to
other libpq users, so it's been renamed pqParseIntParam() and moved to a
more reasonable place within fe-connect.c (rather than randomly between
various keepalive-related routines).
Author: Jelte Fennema-Nio <jelte.fennema@microsoft.com>
Discussion: https://postgr.es/m/AM5PR83MB0178D3B31CA1B6EC4A8ECC42F7529@AM5PR83MB0178.EURPRD83.prod.outlook.com
These comments explained how these functions behave internally, and the
equivalent is described in the documentation section dedicated to the
pipeline mode of libpq. Let's remove these comments, getting rid of the
duplication with the docs.
Reported-by: Álvaro Herrera
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/202401150949.wq7ynlmqxphy@alvherre.pgsql
Commit b8ba7344e9 added in PQgetResult a derefence to a pointer
returned by pqPrepareAsyncResult(), before some other code that was
already testing that pointer for nullness. But since commit
618c16707a (in Postgres 15), pqPrepareAsyncResult() doesn't ever
return NULL (a statically-allocated result is returned if OOM). So in
branches 15 and up, we can remove the redundant pointer check with no
harm done.
However, in branch 14, pqPrepareAsyncResult() can indeed return NULL if
it runs out of memory. Fix things there by adding a null pointer check
before dereferencing the pointer. This should hint Coverity that the
preexisting check is not redundant but necessary.
Backpatch to 14, like b8ba7344e9.
Per Coverity.
This new function is equivalent to PQpipelineSync(), except that it does
not flush anything to the server except if the size threshold of the
output buffer is reached; the user must subsequently call PQflush()
instead.
Its purpose is to reduce the system call overhead of pipeline mode, by
giving to applications more control over the timing of the flushes when
manipulating commands in pipeline mode.
Author: Anton Kirilov
Reviewed-by: Jelte Fennema-Nio, Robert Haas, Álvaro Herrera, Denis
Laxalde, Michael Paquier
Discussion: https://postgr.es/m/CACV6eE5arHFZEA717=iKEa_OewpVFfWJOmsOdGrqqsr8CJVfWQ@mail.gmail.com
Essentially this moves the non-interactive part of psql's "\password"
command into an exported client function. The password is not sent to the
server in cleartext because it is "encrypted" (in the case of scram and md5
it is actually hashed, but we have called these encrypted passwords for a
long time now) on the client side. This is good because it ensures the
cleartext password is never known by the server, and therefore won't end up
in logs, pg_stat displays, etc.
In other words, it exists for the same reason as PQencryptPasswordConn(), but
is more convenient as it both builds and runs the "ALTER USER" command for
you. PQchangePassword() uses PQencryptPasswordConn() to do the password
encryption. PQencryptPasswordConn() is passed a NULL for the algorithm
argument, hence encryption is done according to the server's
password_encryption setting.
Also modify the psql client to use the new function. That provides a builtin
test case. Ultimately drivers built on top of libpq should expose this
function and its use should be generally encouraged over doing ALTER USER
directly for password changes.
Author: Joe Conway
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/flat/b75955f7-e8cc-4bbd-817f-ef536bacbe93%40joeconway.com
There are a lot of Perl scripts in the tree, mostly code generation
and TAP tests. Occasionally, these scripts produce warnings. These
are probably always mistakes on the developer side (true positives).
Typical examples are warnings from genbki.pl or related when you make
a mess in the catalog files during development, or warnings from tests
when they massage a config file that looks different on different
hosts, or mistakes during merges (e.g., duplicate subroutine
definitions), or just mistakes that weren't noticed because there is a
lot of output in a verbose build.
This changes all warnings into fatal errors, by replacing
use warnings;
by
use warnings FATAL => 'all';
in all Perl files.
Discussion: https://www.postgresql.org/message-id/flat/06f899fd-1826-05ab-42d6-adeb1fd5e200%40eisentraut.org
This commit removes all the scripts located in src/tools/msvc/ to build
PostgreSQL with Visual Studio on Windows, meson becoming the recommended
way to achieve that. The scripts held some information that is still
relevant with meson, information kept and moved to better locations.
Comments that referred directly to the scripts are removed.
All the documentation still relevant that was in install-windows.sgml
has been moved to installation.sgml under a new subsection for Visual.
All the content specific to the scripts is removed. Some adjustments
for the documentation are planned in a follow-up set of changes.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut, Andres Freund
Discussion: https://postgr.es/m/ZQzp_VMJcerM1Cs_@paquier.xyz
OpenSSL will sometimes return SSL_ERROR_SYSCALL without having set
errno; this is apparently a reflection of recv(2)'s habit of not
setting errno when reporting EOF. Ensure that we treat such cases
the same as read EOF. Previously, we'd frequently report them like
"could not accept SSL connection: Success" which is confusing, or
worse report them with an unrelated errno left over from some
previous syscall.
To fix, ensure that errno is zeroed immediately before the call,
and report its value only when it's not zero afterwards; otherwise
report EOF.
For consistency, I've applied the same coding pattern in libpq's
pqsecure_raw_read(). Bare recv(2) shouldn't really return -1 without
setting errno, but in case it does we might as well cope.
Per report from Andres Freund. Back-patch to all supported versions.
Discussion: https://postgr.es/m/20231208181451.deqnflwxqoehhxpe@awork3.anarazel.de
The logic to keep the libpq command queue in sync with queries that have
been processed had a bug when errors were returned for reasons other
than problems in queries -- for example, when a connection is lost. We
incorrectly consumed an element from the command queue every time, but
this is wrong and can lead to the queue becoming empty ahead of time,
leading to later malfunction: PQgetResult would return nothing,
potentially causing the calling application to enter a busy loop.
Fix by making the SYNC queue element a barrier that can only be consumed
when a SYNC message is received.
Backpatch to 14.
Reported by: Иван Трофимов (Ivan Trofimov) <i.trofimow@yandex.ru>
Discussion: https://postgr.es/m/17948-fcace7557e449957@postgresql.org
We should have done it this way all along, but we accidentally got
away with using the wrong BIO field up until OpenSSL 3.2. There,
the library's BIO routines that we rely on use the "data" field
for their own purposes, and our conflicting use causes assorted
weird behaviors up to and including core dumps when SSL connections
are attempted. Switch to using the approved field for the purpose,
i.e. app_data.
While at it, remove our configure probes for BIO_get_data as well
as the fallback implementation. BIO_{get,set}_app_data have been
there since long before any OpenSSL version that we still support,
even in the back branches.
Also, update src/test/ssl/t/001_ssltests.pl to allow for a minor
change in an error message spelling that evidently came in with 3.2.
Tristan Partin and Bo Andreson. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAN55FZ1eDDYsYaL7mv+oSLUij2h_u6hvD4Qmv-7PK7jkji0uyQ@mail.gmail.com
The libpq code in charge of creating per-connection SSL objects was
prone to a race condition when loading the custom BIO methods needed by
my_SSL_set_fd(). As BIO methods are stored as a static variable, the
initialization of a connection could fail because it could be possible
to have one thread refer to my_bio_methods while it is being manipulated
by a second concurrent thread.
This error has been introduced by 8bb14cdd33, that has removed
ssl_config_mutex around the call of my_SSL_set_fd(), that itself sets
the custom BIO methods used in libpq. Like previously, the BIO method
initialization is now protected by the existing ssl_config_mutex, itself
initialized earlier for WIN32.
While on it, document that my_bio_methods is protected by
ssl_config_mutex, as this can be easy to miss.
Reported-by: Willi Mann
Author: Willi Mann, Michael Paquier
Discussion: https://postgr.es/m/e77abc4c-4d03-4058-a9d7-ef0035657e04@celonis.com
Backpatch-through: 12
When using GSSAPI encryption in non-blocking mode, libpq sometimes
failed with "GSSAPI caller failed to retransmit all data needing
to be retried". The cause is that pqPutMsgEnd rounds its transmit
request down to an even multiple of 8K, and sometimes that can lead
to not requesting a write of data that was requested to be written
(but reported as not written) earlier. That can upset pg_GSS_write's
logic for dealing with not-yet-written data, since it's possible
the data in question had already been incorporated into an encrypted
packet that we weren't able to send during the previous call.
We could fix this with a one-or-two-line hack to disable pqPutMsgEnd's
round-down behavior, but that seems like making the caller work around
a behavior that pg_GSS_write shouldn't expose in this way. Instead,
adjust pg_GSS_write to never report a partial write: it either
reports a complete write, or reflects the failure of the lower-level
pqsecure_raw_write call. The requirement still exists for the caller
to present at least as much data as on the previous call, but with
the caller-visible write start point not moving there is no temptation
for it to present less. We lose some ability to reclaim buffer space
early, but I doubt that that will make much difference in practice.
This also gets rid of a rather dubious assumption that "any
interesting failure condition (from pqsecure_raw_write) will recur
on the next try". We've not seen failure reports traceable to that,
but I've never trusted it particularly and am glad to remove it.
Make the same adjustments to the equivalent backend routine
be_gssapi_write(). It is probable that there's no bug on the backend
side, since we don't have a notion of nonblock mode there; but we
should keep the logic the same to ease future maintenance.
Per bug #18210 from Lars Kanis. Back-patch to all supported branches.
Discussion: https://postgr.es/m/18210-4c6d0b14627f2eb8@postgresql.org
When PQsendFlushRequest() was added by commit 69cf1d5429, we argued
against adding a PQflush() call in it[1]. This is still the right
decision: if the user wants a flush to occur, they can just call that.
However, we failed to realize that the message bytes could still be
given to the kernel for transmitting when this can be made without
blocking. That's what pqPipelineFlush() does, and it is done for every
single other message type sent by libpq, so do that.
(When the socket is in blocking mode this may indeed block, but that's
what all the other libpq message-sending routines do, too.)
[1] https://www.postgresql.org/message-id/202106252352.5ca4byasfun5%40alvherre.pgsql
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Discussion: https://postgr.es/m/CAGECzQTxZRevRWkKodE-SnJk1Yfm4eKT+8E4Cyq3MJ9YKTnNew@mail.gmail.com
A PostgreSQL release tarball contains a number of prebuilt files, in
particular files produced by bison, flex, perl, and well as html and
man documentation. We have done this consistent with established
practice at the time to not require these tools for building from a
tarball. Some of these tools were hard to get, or get the right
version of, from time to time, and shipping the prebuilt output was a
convenience to users.
Now this has at least two problems:
One, we have to make the build system(s) work in two modes: Building
from a git checkout and building from a tarball. This is pretty
complicated, but it works so far for autoconf/make. It does not
currently work for meson; you can currently only build with meson from
a git checkout. Making meson builds work from a tarball seems very
difficult or impossible. One particular problem is that since meson
requires a separate build directory, we cannot make the build update
files like gram.h in the source tree. So if you were to build from a
tarball and update gram.y, you will have a gram.h in the source tree
and one in the build tree, but the way things work is that the
compiler will always use the one in the source tree. So you cannot,
for example, make any gram.y changes when building from a tarball.
This seems impossible to fix in a non-horrible way.
Second, there is increased interest nowadays in precisely tracking the
origin of software. We can reasonably track contributions into the
git tree, and users can reasonably track the path from a tarball to
packages and downloads and installs. But what happens between the git
tree and the tarball is obscure and in some cases non-reproducible.
The solution for both of these issues is to get rid of the step that
adds prebuilt files to the tarball. The tarball now only contains
what is in the git tree (*). Getting the additional build
dependencies is no longer a problem nowadays, and the complications to
keep these dual build modes working are significant. And of course we
want to get the meson build system working universally.
This commit removes the make distprep target altogether. The make
dist target continues to do its job, it just doesn't call distprep
anymore.
(*) - The tarball also contains the INSTALL file that is built at make
dist time, but not by distprep. This is unchanged for now.
The make maintainer-clean target, whose job it is to remove the
prebuilt files in addition to what make distclean does, is now just an
alias to make distprep. (In practice, it is probably obsolete given
that git clean is available.)
The following programs are now hard build requirements in configure
(they were already required by meson.build):
- bison
- flex
- perl
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/e07408d9-e5f2-d9fd-5672-f53354e9305e@eisentraut.org
Since C99, there can be a trailing comma after the last value in an
enum definition. A lot of new code has been introducing this style on
the fly. Some new patches are now taking an inconsistent approach to
this. Some add the last comma on the fly if they add a new last
value, some are trying to preserve the existing style in each place,
some are even dropping the last comma if there was one. We could
nudge this all in a consistent direction if we just add the trailing
commas everywhere once.
I omitted a few places where there was a fixed "last" value that will
always stay last. I also skipped the header files of libpq and ecpg,
in case people want to use those with older compilers. There were
also a small number of cases where the enum type wasn't used anywhere
(but the enum values were), which ended up confusing pgindent a bit,
so I left those alone.
Discussion: https://www.postgresql.org/message-id/flat/386f8c45-c8ac-4681-8add-e3b0852c1620%40eisentraut.org
Instead of connecting to the server with psql to check if it is ready
for running tests, this changes pg_regress to use PQPing which avoids
performing system() calls which are expensive on some platforms, like
Windows. The frequency of tests is also increased in order to connect
to the server faster.
This patch is part of a larger effort to make testing consume fewer
resources in order to be able to fit more tests into the available
CI system constraints.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20230823192239.jxew5s3sjru63lio@awork3.anarazel.de
There was a mismatch between the const qualifiers for
excludeDirContents in src/backend/backup/basebackup.c and
src/bin/pg_rewind/filemap.c, which led to a quick search for similar
cases. We should make excludeDirContents match, but the rest of the
changes seem like a good idea as well.
Author: David Steele <david@pgmasters.net>
Discussion: https://www.postgresql.org/message-id/flat/669a035c-d23d-2f38-7ff0-0cb93e01d610@pgmasters.net
This commit introduces descriptively-named macros for the
identifiers used in wire protocol messages. These new macros are
placed in a new header file so that they can be easily used by
third-party code.
Author: Dave Cramer
Reviewed-by: Alvaro Herrera, Tatsuo Ishii, Peter Smith, Robert Haas, Tom Lane, Peter Eisentraut, Michael Paquier
Discussion: https://postgr.es/m/CADK3HHKbBmK-PKf1bPNFoMC%2BoBt%2BpD9PH8h5nvmBQskEHm-Ehw%40mail.gmail.com
This Patch introduces three SQL standard JSON functions:
JSON()
JSON_SCALAR()
JSON_SERIALIZE()
JSON() produces json values from text, bytea, json or jsonb values,
and has facilitites for handling duplicate keys.
JSON_SCALAR() produces a json value from any scalar sql value,
including json and jsonb.
JSON_SERIALIZE() produces text or bytea from input which containis
or represents json or jsonb;
For the most part these functions don't add any significant new
capabilities, but they will be of use to users wanting standard
compliant JSON handling.
Catversion bumped as this changes ruleutils.c.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby, Álvaro Herrera,
Peter Eisentraut
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
fe-auth.c references CHAR_BIT since commit 3a465cc67, but it
did not #include <limits.h>, which per POSIX is where that
symbol is defined. This escaped notice so far because
(a) on most platforms, <sys/param.h> pulls in <limits.h>,
(b) even if yours doesn't, OpenSSL pulls it in, so compiling
with --with-openssl masks the omission.
Per bug #18026 from Marcel Hofstetter. Back-patch to v16.
Discussion: https://postgr.es/m/18026-d5bb69f79cd16203@postgresql.org
All supported computers have either POSIX or Windows threads, and we no
longer have any automated testing of --disable-thread-safety. We define
a vestigial ENABLE_THREAD_SAFETY macro to 1 in ecpg_config.h in case it
is useful, but we no longer test it anywhere in PostgreSQL code, and
associated dead code paths are removed.
The Meson and perl-based Windows build scripts never had an equivalent
build option.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CA%2BhUKGLtmexrpMtxBRLCVePqV_dtWG-ZsEbyPrYc%2BNBB2TkNsw%40mail.gmail.com
Historically this module dealt with thread-safety of system interfaces,
but now all that's left is wrapper code for user name and home directory
lookup. Arguably the Windows variants of this logic could be moved in
here too, to justify its presence under port. For now, just tidy up
some obsolete references to multi-threading, and give the file a
meaningful name.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CA%2BhUKGLtmexrpMtxBRLCVePqV_dtWG-ZsEbyPrYc%2BNBB2TkNsw%40mail.gmail.com
This commit comes as a continuation of the discussion that has led to
d522b05, as \v was handled inconsistently when parsing array values or
anything going through the parsers, and changing a parser behavior in
stable branches is a scary thing to do. The parsing of array values now
uses the more central scanner_isspace() and array_isspace() is removed.
As pointing out by Peter Eisentraut, fix a confusing reference to
horizontal space in the parsers with the term "horiz_space". \f was
included in this set since 3cfdd8f from 2000, but it is not horizontal.
"horiz_space" is renamed to "non_newline_space", to refer to all
whitespace characters except newlines.
The changes impact the parsers for the backend, psql, seg, cube, ecpg
and replication commands. Note that JSON should not escape \v, as per
RFC 7159, so these are not touched.
Reviewed-by: Peter Eisentraut, Tom Lane
Discussion: https://postgr.es/m/ZJKcjNwWHHvw9ksQ@paquier.xyz
The following routines are added to libpq:
PGresult *PQclosePrepared(PGconn *conn, const char *stmt);
PGresult *PQclosePortal(PGconn *conn, const char *portal);
int PQsendClosePrepared(PGconn *conn, const char *stmt);
int PQsendClosePortal(PGconn *conn, const char *portal);
The "send" routines are non-blocking versions of the two others.
Close messages are part of the protocol but they did not have a libpq
implementation. And, having these routines is for instance useful with
connection poolers as these can detect more easily Close messages
than DEALLOCATE queries.
The implementation takes advantage of what the Describe routines rely on
for portals and statements. Some regression tests are added in
libpq_pipeline, for the four new routines, by closing portals and
statements created already by the tests.
Author: Jelte Fennema
Reviewed-by: Jian He, Michael Paquier
Discussion: https://postgr.es/m/CAGECzQTb4xFAopAVokudB+L62Kt44mNAL4Z9zZ7UTrs1TRFvWA@mail.gmail.com
Here are some notes about this change:
- As X509_get_signature_nid() should always exist (OpenSSL and
LibreSSL), hence HAVE_X509_GET_SIGNATURE_NID is now gone.
- OPENSSL_API_COMPAT is bumped to 0x10002000L.
- One comment related to 1.0.1e introduced by 74242c2 is removed.
Upstream OpenSSL still provides long-term support for 1.0.2 in a closed
fashion, so removing it is out of scope for a few years, at least.
Reviewed-by: Jacob Champion, Daniel Gustafsson
Discussion: https://postgr.es/m/ZG3JNursG69dz1lr@paquier.xyz
This applies the new error message API from commit 0873b2d354 to the
changes introduced by bbf9c282ce. The latter was committed shortly
after the former, so it probably didn't get the news in time.
Eventually it is likely worth trying to deal with this in a more expansive
way, by generating dependency files generated within the scripts. But it's not
entirely obvious how to do that in perl and is work more suitable for 17
anyway.
Reported-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Tristan Partin <tristan@neon.tech>
Discussion: https://postgr.es/m/87v8g7s6bf.fsf@wibble.ilmari.org
That's how other boolean options are handled, so do likewise.
The previous coding with "enable" and "disable" was seemingly
modeled on gssencmode, but that's a three-way flag.
While at it, add PGGSSDELEGATION to the set of environment
variables cleared by pg_regress and Utils.pm.
Abhijit Menon-Sen, per gripe from Alvaro Herrera
Discussion: https://postgr.es/m/20230522091609.nlyuu4nolhycqs2p@alvherre.pgsql
Complete the task begun in 9c0a0e2ed: we don't want to use the
abbreviation "deleg" for GSS delegation in any user-visible places.
(For consistency, this also changes most internal uses too.)
Abhijit Menon-Sen and Tom Lane
Discussion: https://postgr.es/m/949048.1684639317@sss.pgh.pa.us
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
Commit 6df7a9698b accidentally included two identical prototypes for
default_multirange_selectivi() and commit 086cf1458c added a break;
statement where one was already present, thus duplicating it. While
there is no bug caused by this, fix by removing the duplicated lines
as they provide no value.
Backpatch the fix for duplicate prototypes to v14 and the duplicate
break statement fix to all supported branches to avoid backpatching
hazards due to the removal.
Reported-by: Anton Voloshin <a.voloshin@postgrespro.ru>
Discussion: https://postgr.es/m/0e69cb60-0176-f6d0-7e15-6478b7d85724@postgrespro.ru
Commit 7f5b198 introduced TAP tests that use string literals to mark
the presence of a query in server logs. Reorder the markers to make
sure they are used in alphabetical order for easier debugging.
Author: Gurjeet Singh <gurjeet@singh.im>
Reviewed-by: Jelte Fennema <postgres@jeltef.nl>
Discussion: https://postgr.es/m/CABwTF4WcYAENqyUQS2crAYfDuJ497v82ty2-MirjaC+zz9e8nQ@mail.gmail.com
The errormessage for an incorrect require_auth method wasn't using the
common "invalid %s value" errormessage which lessens the burden on our
translators. Fix by changing to that format to make use of existing
translations and to make error messages consistent in wording.
Reported and fixed by Gurjeet Singh with some tweaking by myself.
Author: Gurjeet Singh <gurjeet@singh.im>
Discussion: https://postgr.es/m/CABwTF4Xu3g9zohJ9obu8m7MKbf8g63NgpRDjwqPHQgAtB+Gb8Q@mail.gmail.com
The error message for a missing or invalid system CA when using
sslrootcert=system differs based on the OpenSSL version used.
In OpenSSL 1.0.1-3.0 it is reported as SSL Error, with varying
degrees of helpfulness in the error message. With OpenSSL 3.1 it
is reported as an SSL SYSCALL error with "Undefined error" as
the error message. This fix pulls out the particular error in
OpenSSL 3.1 as a certificate verify error in order to help the
user better figure out what happened, and to keep the ssl test
working. While there is no evidence that extracing the errors
will clobber errno, this adds a guard against that regardless
to also make the consistent with how we handle OpenSSL errors
elsewhere. It also memorizes the output from OpenSSL 3.0 in
the test in cases where the system CA isn't responding.
Reported-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/c39be3c5-c1a5-1e33-1024-16f527e251a4@enterprisedb.com
When compiled with -C ORACLE, ecpg_get_data() had a one-off issue where
it would incorrectly store the null terminator byte to str[-1] when
varcharsize is 0, which is something that can happen when using SQLDA.
This would eat 1 byte from the previous field stored, corrupting the
results generated.
All the callers of ecpg_get_data() estimate and allocate enough storage
for the data received, and the fix of this commit relies on this
assumption. Note that this maps to the case where no padding or
truncation is required.
This issue has been introduced by 3b7ab43 with the Oracle compatibility
option, so backpatch down to v11.
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20230410.173500.440060475837236886.horikyota.ntt@gmail.com
Backpatch-through: 11
This fixes many spelling mistakes in comments, but a few references to
invalid parameter names, function names and option names too in comments
and also some in string constants
Also, fix an #undef that was undefining the incorrect definition
Author: Alexander Lakhin
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/d5f68d19-c0fc-91a9-118d-7c6a5a3f5fad@gmail.com
This reverts commit 3d03b24c3 (Revert Add support for Kerberos
credential delegation) which was committed on the grounds of concern
about portability, but on further review and discussion, it's clear that
we are better off explicitly requiring MIT Kerberos as that appears to
be the only GSSAPI library currently that's under proper maintenance
and ongoing development. The API used for storing credentials was added
to MIT Kerberos over a decade ago while for the other libraries which
appear to be mainly based on Heimdal, which exists explicitly to be a
re-implementation of MIT Kerberos, the API never made it to a released
version (even though it was added to the Heimdal git repo over 5 years
ago..).
This post-feature-freeze change was approved by the RMT.
Discussion: https://postgr.es/m/ZDDO6jaESKaBgej0%40tamriel.snowman.net
This reverts commit 3d4fa227bc.
Per discussion and buildfarm, this depends on APIs that seem to not
be available on at least one platform (NetBSD). Should be certainly
possible to rework to be optional on that platform if necessary but bit
late for that at this point.
Discussion: https://postgr.es/m/3286097.1680922218@sss.pgh.pa.us
Support GSSAPI/Kerberos credentials being delegated to the server by a
client. With this, a user authenticating to PostgreSQL using Kerberos
(GSSAPI) credentials can choose to delegate their credentials to the
PostgreSQL server (which can choose to accept them, or not), allowing
the server to then use those delegated credentials to connect to
another service, such as with postgres_fdw or dblink or theoretically
any other service which is able to be authenticated using Kerberos.
Both postgres_fdw and dblink are changed to allow non-superuser
password-less connections but only when GSSAPI credentials have been
delegated to the server by the client and GSSAPI is used to
authenticate to the remote system.
Authors: Stephen Frost, Peifeng Qiu
Reviewed-By: David Christensen
Discussion: https://postgr.es/m/CO1PR05MB8023CC2CB575E0FAAD7DF4F8A8E29@CO1PR05MB8023.namprd05.prod.outlook.com
This adds a new option to libpq's sslrootcert, "system", which will load
the system trusted CA roots for certificate verification. This is a more
convenient way to achieve this than pointing to the system CA roots
manually since the location can differ by installation and be locally
adjusted by env vars in OpenSSL.
When sslrootcert is set to system, sslmode is forced to be verify-full
as weaker modes aren't providing much security for public CAs.
Changing the location of the system roots by setting environment vars is
not supported by LibreSSL so the tests will use a heuristic to determine
if the system being tested is LibreSSL or OpenSSL.
The workaround in .cirrus.yml is required to handle a strange interaction
between homebrew and the openssl@3 formula; hopefully this can be removed
in the near future.
The original patch was written by Thomas Habets, which was later revived
by Jacob Champion.
Author: Jacob Champion <jchampion@timescale.com>
Author: Thomas Habets <thomas@habets.se>
Reviewed-by: Jelte Fennema <postgres@jeltef.nl>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Magnus Hagander <magnus@hagander.net>
Discussion: https://www.postgresql.org/message-id/flat/CA%2BkHd%2BcJwCUxVb-Gj_0ptr3_KZPwi3%2B67vK6HnLFBK9MzuYrLA%40mail.gmail.com
- At the last minute and for no particularly good reason, I changed the
WITHOUT token to be marked especially for lookahead, from the one in
WITHOUT TIME to the one in WITHOUT UNIQUE. Study of upcoming patches
(where a new WITHOUT ARRAY WRAPPER clause is added) showed me that the
former was better, so put it back the way the original patch had it.
- update exprTypmod() for JsonConstructorExpr to return the typmod of
the RETURNING clause, as a comment there suggested. Perhaps it's
possible for this to make a difference with datetime types, but I
didn't try to build a test case.
- The nodeFuncs.c support code for new nodes was calling walker()
directly instead of the WALK() macro as introduced by commit 1c27d16e6e.
Modernize that. Also add exprLocation() support for a couple of nodes
that missed it. Lastly, reorder the code more sensibly.
The WITHOUT_LA -> WITHOUT change means that stored rules containing
either WITHOUT TIME ZONE or WITHOUT UNIQUE KEYS would change
representation. Therefore, bump catversion.
Discussion: https://postgr.es/m/20230329181708.e64g2tpy7jyufqkr@alvherre.pgsql
This patch introduces the SQL standard IS JSON predicate. It operates
on text and bytea values representing JSON, as well as on the json and
jsonb types. Each test has IS and IS NOT variants and supports a WITH
UNIQUE KEYS flag. The tests are:
IS JSON [VALUE]
IS JSON ARRAY
IS JSON OBJECT
IS JSON SCALAR
These should be self-explanatory.
The WITH UNIQUE KEYS flag makes these return false when duplicate keys
exist in any object within the value, not necessarily directly contained
in the outermost object.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/CAF4Au4w2x-5LTnN_bxky-mq4=WOqsGsxSpENCzHRAzSnEd8+WQ@mail.gmail.com
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
The fallback seed for when pg_strong_random cannot generate a high
quality seed mixes in the address of the conn object, but the cast
failed to take the word size into consideration. Fix by casting to
a uintptr_t instead. The seed calculation was added in 7f5b19817e.
The code as it stood generated the following warning on mamba and
lapwing in the buildfarm:
fe-connect.c: In function 'libpq_prng_init':
fe-connect.c:1048:11: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
1048 | rseed = ((uint64) conn) ^
| ^
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Discussion: https://postgr.es/m/TYAPR01MB58665250EDCD551CCA9AD117F58E9@TYAPR01MB5866.jpnprd01.prod.outlook.com
This adds support for load balancing connections with libpq using a
connection parameter: load_balance_hosts=<string>. When setting the
param to random, hosts and addresses will be connected to in random
order. This then results in load balancing across these addresses and
hosts when multiple clients or frequent connection setups are used.
The randomization employed performs two levels of shuffling:
1. The given hosts are randomly shuffled, before resolving them
one-by-one.
2. Once a host its addresses get resolved, the returned addresses
are shuffled, before trying to connect to them one-by-one.
Author: Jelte Fennema <postgres@jeltef.nl>
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Michael Banck <mbanck@gmx.net>
Reviewed-by: Andrey Borodin <amborodin86@gmail.com>
Discussion: https://postgr.es/m/PR3PR83MB04768E2FF04818EEB2179949F7A69@PR3PR83MB0476.EURPRD83.prod.outlook.
This refactors libpq to copy addrinfos returned by getaddrinfo to
memory owned by libpq such that future improvements can alter for
example the order of entries.
As a nice side effect of this refactor the mechanism for iteration
over addresses in PQconnectPoll is now identical to its iteration
over hosts.
Author: Jelte Fennema <postgres@jeltef.nl>
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Michael Banck <mbanck@gmx.net>
Reviewed-by: Andrey Borodin <amborodin86@gmail.com>
Discussion: https://postgr.es/m/PR3PR83MB04768E2FF04818EEB2179949F7A69@PR3PR83MB0476.EURPRD83.prod.outlook.com
This commit introduces the SQL/JSON standard-conforming constructors for
JSON types:
JSON_ARRAY()
JSON_ARRAYAGG()
JSON_OBJECT()
JSON_OBJECTAGG()
Most of the functionality was already present in PostgreSQL-specific
functions, but these include some new functionality such as the ability
to skip or include NULL values, and to allow duplicate keys or throw
error when they are found, as well as the standard specified syntax to
specify output type and format.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Amit Langote <amitlangote09@gmail.com>
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/CAF4Au4w2x-5LTnN_bxky-mq4=WOqsGsxSpENCzHRAzSnEd8+WQ@mail.gmail.com
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Replace the hardcoded value with a GUC such that the iteration
count can be raised in order to increase protection against
brute-force attacks. The hardcoded value for SCRAM iteration
count was defined to be 4096, which is taken from RFC 7677, so
set the default for the GUC to 4096 to match. In RFC 7677 the
recommendation is at least 15000 iterations but 4096 is listed
as a SHOULD requirement given that it's estimated to yield a
0.5s processing time on a mobile handset of the time of RFC
writing (late 2015).
Raising the iteration count of SCRAM will make stored passwords
more resilient to brute-force attacks at a higher computational
cost during connection establishment. Lowering the count will
reduce computational overhead during connections at the tradeoff
of reducing strength against brute-force attacks.
There are however platforms where even a modest iteration count
yields a too high computational overhead, with weaker password
encryption schemes chosen as a result. In these situations,
SCRAM with a very low iteration count still gives benefits over
weaker schemes like md5, so we allow the iteration count to be
set to one at the low end.
The new GUC is intentionally generically named such that it can
be made to support future SCRAM standards should they emerge.
At that point the value can be made into key:value pairs with
an undefined key as a default which will be backwards compatible
with this.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Jonathan S. Katz <jkatz@postgresql.org>
Discussion: https://postgr.es/m/F72E7BC7-189F-4B17-BF47-9735EB72C364@yesql.se
The sslcertmode option controls whether the server is allowed and/or
required to request a certificate from the client. There are three
modes:
- "allow" is the default and follows the current behavior, where a
configured client certificate is sent if the server requests one
(via one of its default locations or sslcert). With the current
implementation, will happen whenever TLS is negotiated.
- "disable" causes the client to refuse to send a client certificate
even if sslcert is configured or if a client certificate is available in
one of its default locations.
- "require" causes the client to fail if a client certificate is never
sent and the server opens a connection anyway. This doesn't add any
additional security, since there is no guarantee that the server is
validating the certificate correctly, but it may helpful to troubleshoot
more complicated TLS setups.
sslcertmode=require requires SSL_CTX_set_cert_cb(), available since
OpenSSL 1.0.2. Note that LibreSSL does not include it.
Using a connection parameter different than require_auth has come up as
the simplest design because certificate authentication does not rely
directly on any of the AUTH_REQ_* codes, and one may want to require a
certificate to be sent in combination of a given authentication method,
like SCRAM-SHA-256.
TAP tests are added in src/test/ssl/, some of them relying on sslinfo to
check if a certificate has been set. These are compatible across all
the versions of OpenSSL supported on HEAD (currently down to 1.0.1).
Author: Jacob Champion
Reviewed-by: Aleksander Alekseev, Peter Eisentraut, David G. Johnston,
Michael Paquier
Discussion: https://postgr.es/m/9e5a8ccddb8355ea9fa4b75a1e3a9edc88a70cd3.camel@vmware.com
The same error message will be used for a different option, to be
introduced in a separate patch. Reshaping the error message as done
here saves in translation.
Extracted from a larger patch by the same author.
Author: Jacob Champion
Discussion: https://postgr.es/m/9e5a8ccddb8355ea9fa4b75a1e3a9edc88a70cd3.camel@vmware.com
Since commit 7627b91cd5, libpq has used FD_CLOEXEC so that sockets
wouldn't be leaked to subprograms. With enough bad luck, a
multi-threaded program might fork in between the socket() and fcntl()
calls. We can close that tiny gap by using SOCK_CLOEXEC instead of a
separate call. While here, we might as well do the same for
SOCK_NONBLOCK, to save another syscall.
These flags are expected to appear in the next revision of the POSIX
standard, specifically to address this problem. Our Unixoid targets
except macOS and AIX have had them for a long time, and macOS would
hopefully use guarded availability to roll them out, so it seems enough
to use a simple ifdef test for availability until we hear otherwise.
Windows doesn't have them, but has non-inheritable sockets by default.
Discussion: https://postgr.es/m/CA%2BhUKGKb6FsAdQWcRL35KJsftv%2B9zXqQbzwkfRf1i0J2e57%2BhQ%40mail.gmail.com
Support for SCM credential authentication has been removed in the
backend in 9.1, and libpq has kept some code to handle it for
compatibility.
Commit be4585b, that did the cleanup of the backend code, has done
so because the code was not really portable originally. And, as there
are likely little chances that this is used these days, this removes the
remaining code from libpq. An error will now be raised by libpq if
attempting to connect to a server that returns AUTH_REQ_SCM_CREDS,
instead.
References to SCM credential authentication are removed from the
protocol documentation. This removes some meson and configure checks.
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/ZBLH8a4otfqgd6Kn@paquier.xyz
In the .pc (pkg-config) files generated by the make and meson builds,
the Requires.private entries use different delimiters. The make build
uses spaces, the meson build uses commas. The pkg-config documentation
says that it should be comma-separated, but apparently about half the
.pc in the wild use just spaces. The pkg-config source code
acknowledges that both commas and spaces work.
This changes the make build to use commas, for consistency.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/1fb52d61-0964-2d8e-87d9-e8be830e2b24%40enterprisedb.com
The new connection parameter require_auth allows a libpq client to
define a list of comma-separated acceptable authentication types for use
with the server. There is no negotiation: if the server does not
present one of the allowed authentication requests, the connection
attempt done by the client fails.
The following keywords can be defined in the list:
- password, for AUTH_REQ_PASSWORD.
- md5, for AUTH_REQ_MD5.
- gss, for AUTH_REQ_GSS[_CONT].
- sspi, for AUTH_REQ_SSPI and AUTH_REQ_GSS_CONT.
- scram-sha-256, for AUTH_REQ_SASL[_CONT|_FIN].
- creds, for AUTH_REQ_SCM_CREDS (perhaps this should be removed entirely
now).
- none, to control unauthenticated connections.
All the methods that can be defined in the list can be negated, like
"!password", in which case the server must NOT use the listed
authentication type. The special method "none" allows/disallows the use
of unauthenticated connections (but it does not govern transport-level
authentication via TLS or GSSAPI).
Internally, the patch logic is tied to check_expected_areq(), that was
used for channel_binding, ensuring that an incoming request is
compatible with conn->require_auth. It also introduces a new flag,
conn->client_finished_auth, which is set by various authentication
routines when the client side of the handshake is finished. This
signals to check_expected_areq() that an AUTH_REQ_OK from the server is
expected, and allows the client to complain if the server bypasses
authentication entirely, with for example the reception of a too-early
AUTH_REQ_OK message.
Regression tests are added in authentication TAP tests for all the
keywords supported (except "creds", because it is around only for
compatibility reasons). A new TAP script has been added for SSPI, as
there was no script dedicated to it yet. It relies on SSPI being the
default authentication method on Windows, as set by pg_regress.
Author: Jacob Champion
Reviewed-by: Peter Eisentraut, David G. Johnston, Michael Paquier
Discussion: https://postgr.es/m/9e5a8ccddb8355ea9fa4b75a1e3a9edc88a70cd3.camel@vmware.com
The error cases for TLS and GSS encryption were inconsistent. After TLS
fails, the connection is marked as dead and follow-up calls of
PQconnectPoll() would return immediately, but GSS encryption was not
doing that, so the connection would still have been allowed to enter the
GSS handling code. This was handled incorrectly when gssencmode was set
to "require". "prefer" was working correctly, and this could not happen
under "disable" as GSS encryption would not be attempted.
This commit makes the error handling of GSS encryption on par with TLS
portion, fixing the case of gssencmode=require.
Reported-by: Jacob Champion
Author: Michael Paquier
Reviewed-by: Jacob Champion, Stephen Frost
Discussion: https://postgr.es/m/23787477-5fe1-a161-6d2a-e459f74c4713@timescale.com
Backpatch-through: 12
The 'ssl' option is of type 'combo', but we add a choice 'auto' that
simulates the behavior of a feature option. This way, openssl is used
automatically by default if present, but we retain the ability to
potentially select another ssl library.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/ad65ffd1-a9a7-fda1-59c6-f7dc763c3051%40enterprisedb.com
A patch sent by Jacob Champion has been touching this area of the code,
and the set of changes done in a9e9a9f has made a run of pgindent on
these files a bit annoying to handle. So let's clean up a bit the area,
first, to ease the work on follow-up patches.
Discussion: https://postgr.es/m/9e5a8ccddb8355ea9fa4b75a1e3a9edc88a70cd3.camel@vmware.com
One file per line seems best. We already did this in some cases.
This adopts the same format everywhere (except in some cases where the
list reasonably fits on one line).
A couple of code paths in CONNECTION_AWAITING_RESPONSE will eagerly read
bytes off a connection that should be closed. Don't let a misbehaving
server chew up client resources here; a v2 error can't be infinitely
long, and a v3 error should be bounded by its original message length.
For the existing error_return cases, I added some additional error
messages for symmetry with the new ones, and cleaned up some message
rot.
Author: Jacob Champion
Discussion: https://www.postgresql.org/message-id/8e729daf-7d71-6965-9687-8bc0630599b3%40timescale.com
OpenSSL 1.1.1 and newer versions have added support for RSA-PSS
certificates, which requires the use of a specific routine in OpenSSL to
determine which hash function to use when compiling it when using
channel binding in SCRAM-SHA-256. X509_get_signature_nid(), that is the
original routine the channel binding code has relied on, is not able to
determine which hash algorithm to use for such certificates. However,
X509_get_signature_info(), new to OpenSSL 1.1.1, is able to do it. This
commit switches the channel binding logic to rely on
X509_get_signature_info() over X509_get_signature_nid(), which would be
the choice when building with 1.1.1 or newer.
The error could have been triggered on the client or the server, hence
libpq and the backend need to have their related code paths patched.
Note that attempting to load an RSA-PSS certificate with OpenSSL 1.1.0
or older leads to a failure due to an unsupported algorithm.
The discovery of relying on X509_get_signature_info() comes from Jacob,
the tests have been written by Heikki (with few tweaks from me), while I
have bundled the whole together while adding the bits needed for MSVC
and meson.
This issue exists since channel binding exists, so backpatch all the way
down. Some tests are added in 15~, triggered if compiling with OpenSSL
1.1.1 or newer, where the certificate and key files can easily be
generated for RSA-PSS.
Reported-by: Gunnar "Nick" Bluth
Author: Jacob Champion, Heikki Linnakangas
Discussion: https://postgr.es/m/17760-b6c61e752ec07060@postgresql.org
Backpatch-through: 11
pqsecure_open_gss() includes a code path handling error messages with
v2-style protocol messages coming from the server. The client-side
buffer holding the error message does not force a NULL-termination, with
the data of the server getting copied to the errorMessage of the
connection. Hence, it would be possible for a server to send an
unterminated string and copy arbitrary bytes in the buffer receiving the
error message in the client, opening the door to a crash or even data
exposure.
As at this stage of the authentication process the exchange has not been
completed yet, this could be abused by an attacker without Kerberos
credentials. Clients that have a valid kerberos cache are vulnerable as
libpq opportunistically requests for it except if gssencmode is
disabled.
Author: Jacob Champion
Backpatch-through: 12
Security: CVE-2022-41862
This allows underscores to be used in integer and numeric literals,
and their corresponding type input functions, for visual grouping.
For example:
1_500_000_000
3.14159_26535_89793
0xffff_ffff
0b_1001_0001
A single underscore is allowed between any 2 digits, or immediately
after the base prefix indicator of non-decimal integers, per SQL:202x
draft.
Peter Eisentraut and Dean Rasheed
Discussion: https://postgr.es/m/84aae844-dc55-a4be-86d9-4f0fa405cc97%40enterprisedb.com
SCRAM_KEY_LEN was a variable used in the internal routines of SCRAM to
size a set of fixed-sized arrays used in the SHA and HMAC computations
during the SASL exchange or when building a SCRAM password. This had a
hard dependency on SHA-256, reducing the flexibility of SCRAM when it
comes to the addition of more hash methods. A second issue was that
SHA-256 is assumed as the cryptohash method to use all the time.
This commit renames SCRAM_KEY_LEN to a more generic SCRAM_KEY_MAX_LEN,
which is used as the size of the buffers used by the internal routines
of SCRAM. This is aimed at tracking centrally the maximum size
necessary for all the hash methods supported by SCRAM. A global
variable has the advantage of keeping the code in its simplest form,
reducing the need of more alloc/free logic for all the buffers used in
the hash calculations.
A second change is that the key length (SHA digest length) and hash
types are now tracked by the state data in the backend and the frontend,
the common portions being extended to handle these as arguments by the
internal routines of SCRAM. There are a few RFC proposals floating
around to extend the SCRAM protocol, including some to use stronger
cryptohash algorithms, so this lifts some of the existing restrictions
in the code.
The code in charge of parsing and building SCRAM secrets is extended to
rely on the key length and on the cryptohash type used for the exchange,
assuming currently that only SHA-256 is supported for the moment. Note
that the mock authentication simply enforces SHA-256.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut, Jonathan Katz
Discussion: https://postgr.es/m/Y5k3Qiweo/1g9CG6@paquier.xyz
Add support for hexadecimal, octal, and binary integer literals:
0x42F
0o273
0b100101
per SQL:202x draft.
This adds support in the lexer as well as in the integer type input
functions.
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/b239564c-cad0-b23e-c57e-166d883cb97d@enterprisedb.com
To run all tests that support running against existing server:
$ meson test --setup running
To run just the main pg_regress tests against existing server:
$ meson test --setup running regress-running/regress
To ensure the 'running' setup continues to work, test it as part of the
freebsd CI task.
Discussion: https://postgr.es/m/CAH2-Wz=XDQcmLoo7RR_i6FKQdDmcyb9q5gStnfuuQXrOGhB2sQ@mail.gmail.com
The frontend-side routine in charge of building a SCRAM verifier
mentioned that the restrictions applying to SASLprep on the password
with the encoding are described at the top of fe-auth-scram.c, but this
information is in auth-scram.c.
This is wrong since 8f8b9be, so backpatch all the way down as this is an
important documentation bit.
Spotted while reviewing a different patch.
Backpatch-through: 11
Before, receiving a NegotiateProtocolVersion message would result in a
confusing error message like
expected authentication request from server, but received v
This adds proper handling of this protocol message and produces an
on-topic error message from it.
Reviewed-by: Jacob Champion <jchampion@timescale.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/f9c7862f-b864-8ef7-a861-c4638c83e209%40enterprisedb.com
After sending a startup message, libpq expects either an error
response ('E') or an authentication request ('R'). Before processing
the message, it ensures it has read enough bytes to correspond to the
length specified in the message. However, when processing the 'R'
message, if an EOF status is returned it loops back waiting for more
input, even though we already checked that we have enough input. In
this particular case, this is probably not reachable anyway, because
other code ensures we have enough bytes for an authentication request
message, but the code is wrong and misleading. In the more general
case, processing a faulty message could result in an EOF status, which
would then result in an infinite loop waiting for the end of a message
that will never come. The correction is to make this an error.
Reported-by: Jacob Champion <jchampion@timescale.com>
Discussion: https://www.postgresql.org/message-id/flat/f9c7862f-b864-8ef7-a861-c4638c83e209@enterprisedb.com
libpq now contains a mix of error message strings that end with
newlines and don't end with newlines, due to some newer code paths
with new ways of passing errors around. This leads to confusion and
mistakes both during development and translation.
This adds new functions libpq_append_error() and
libpq_append_conn_error() that encapsulate common code paths for
producing error message strings. Notably, these functions append the
newline, so that the string appearing in the code does not end with a
newline. This makes (almost) all error message strings in libpq
uniform in this regard (and also consistent with how we handle it
outside of libpq code). (There are a few exceptions that are
difficult to fit into this scheme, but they are only a few.)
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/7c0232ef-7b44-68db-599d-b327d0640a77@enterprisedb.com
When a query whose results were requested in single-row mode is the last
in the queue by the time those results are being read, the single-row
flag was not being reset, because we were returning early from
pqPipelineProcessQueue. Move that stanza up so that the flag is always
reset at the end of sending that query's results.
Add a test for the situation.
Backpatch to 14.
Author: Denis Laxalde <denis.laxalde@dalibo.com>
Discussion: https://postgr.es/m/01af18c5-dacc-a8c8-07ee-aecc7650c3e8@dalibo.com
This substantially speeds up building for windows, due to the vast amount of
headers included via windows.h. A cross build from linux targetting mingw goes
from
994.11user 136.43system 0:31.58elapsed 3579%CPU
to
422.41user 89.05system 0:14.35elapsed 3562%CPU
The wins on windows are similar-ish (but I don't have a system at hand just
now for actual numbers). Targetting other operating systems the wins are far
smaller (tested linux, macOS, FreeBSD).
For now precompiled headers are disabled by default, it's not clear how well
they work on all platforms. E.g. on FreeBSD gcc doesn't seem to have working
support, but clang does.
When doing a full build precompiled headers are only beneficial for targets
with multiple .c files, as meson builds a separate precompiled header for each
target (so that different compilation options take effect). This commit
therefore only changes target with at least two .c files to use precompiled
headers.
Because this commit adds b_pch=false to the default_options new build
directories will have precompiled headers disabled by default, however
existing build directories will continue use the default value of b_pch, which
is true.
Note that using precompiled headers with ccache requires setting
CCACHE_SLOPPINESS=pch_defines,time_macros to get hits.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CA+hUKG+50eOUbN++ocDc0Qnp9Pvmou23DSXu=ZA6fepOcftKqA@mail.gmail.com
Discussion: https://postgr.es/m/c5736f70-bb6d-8d25-e35c-e3d886e4e905@enterprisedb.com
Discussion: https://postgr.es/m/20190826054000.GE7005%40paquier.xyz
The generated resource files aren't exactly the same ones as the old
buildsystems generate. Previously "InternalName" and "OriginalFileName" were
mostly wrong / not set (despite being required), but that was hard to fix in
at least the make build. Additionally, the meson build falls back to a
"auto-generated" description when not set, and doesn't set it in a few cases -
unlikely that anybody looks at these descriptions in detail.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Required for correct resource file generation, as the resource files should
only be added to the shared library.
This also fixes a bunch of issues in the .pc files.
Previously I tried to avoid building sources twice, once for the static and
once for the shared libraries. We could still do so, but it's not clear that
it's worth the complication.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20220927011951.j3h4o7n6bhf7dwau@awork3.anarazel.de
Improvements:
- we don't need -DFRONTEND for libpq anymore since 1d77afefbd
- the .pc file contents for a static libpq were wrong (referencing
{pgport, common}_shlib)
- incidentally fixes meson not supporting link_whole on AIX yet
- added explanatory comments
Previously I tried to avoid building libpq's sources twice, once for the
static and once for the shared library. We could still do so, but it's not
clear that it's worth the complication.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
In a similar effort to f01592f91, here we mostly rename shadowed local
variables to remove the warnings produced when compiling with
-Wshadow=compatible-local.
This fixes 63 warnings and leaves just 5.
Author: Justin Pryzby, David Rowley
Reviewed-by: Justin Pryzby
Discussion https://postgr.es/m/20220817145434.GC26426%40telsasoft.com
Currently, PQsslAttributeNames() returns the same list of attribute
names regardless of its conn parameter. This patch changes it to
have behavior parallel to what 80a05679d installed for PQsslAttribute:
you get OpenSSL's attributes if conn is NULL or is an SSL-encrypted
connection, or an empty list if conn is a non-encrypted connection.
The point of this is to have sensible connection-dependent behavior
in case we ever support multiple SSL libraries. The behavior for
NULL can be defined as "the attributes for the default SSL library",
parallel to what PQsslAttribute(NULL, "library") does.
Since this is mostly just future-proofing, no back-patch.
Discussion: https://postgr.es/m/17625-fc47c78b7d71b534@postgresql.org
Commit ebc8b7d44 intended to change the behavior of
PQsslAttribute(NULL, "library"), but accidentally also changed
what happens with a non-NULL conn pointer. Undo that so that
only the intended behavior change happens. Clarify some
associated documentation.
Per bug #17625 from Heath Lord. Back-patch to v15.
Discussion: https://postgr.es/m/17625-fc47c78b7d71b534@postgresql.org
The extended query protocol implementation I added in commit
acb7e4eb6b has bugs when used in pipeline mode. Rather than spend
more time trying to fix it, remove that code and make the function rely
on simple query protocol only, meaning it can no longer be used in
pipeline mode.
Users can easily change their applications to use PQsendQueryParams
instead. We leave PQsendQuery in place for Postgres 14, just in case
somebody is using it and has not hit the mentioned bugs; but we should
recommend that it not be used.
Backpatch to 15.
Per bug report from Gabriele Varrazzo.
Discussion: https://postgr.es/m/CA+mi_8ZGSQNmW6-mk_iSR4JZB_LJ4ww3suOF+1vGNs3MrLsv4g@mail.gmail.com
Make ecpg function declarations consistently use named parameters. Also
make sure that the declarations use names that match corresponding names
from function definitions.
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in optimizer, parser,
utility, libpq, and "commands" code, as well as in remaining library
code. Do the same for all code related to frontend programs (with the
exception of pg_dump/pg_dumpall related code).
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will handle
ecpg and pg_dump/pg_dumpall.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
The ECPG preprocessor converted code such as
static varchar str1[10], str2[20], str3[30];
into
static struct varchar_1 { int len; char arr[ 10 ]; } str1 ;
struct varchar_2 { int len; char arr[ 20 ]; } str2 ;
struct varchar_3 { int len; char arr[ 30 ]; } str3 ;
thus losing the storage attribute for the later variables.
Repeat the declaration for each such variable.
(Note that this occurred only for variables declared "varchar"
or "bytea", which may help explain how it escaped detection
for so long.)
Andrey Sokolov
Discussion: https://postgr.es/m/942241662288242@mail.yandex.ru
The reverts the following and makes some associated cleanups:
commit f79b803dc: Common SQL/JSON clauses
commit f4fb45d15: SQL/JSON constructors
commit 5f0adec25: Make STRING an unreserved_keyword.
commit 33a377608: IS JSON predicate
commit 1a36bc9db: SQL/JSON query functions
commit 606948b05: SQL JSON functions
commit 49082c2cc: RETURNING clause for JSON() and JSON_SCALAR()
commit 4e34747c8: JSON_TABLE
commit fadb48b00: PLAN clauses for JSON_TABLE
commit 2ef6f11b0: Reduce running time of jsonb_sqljson test
commit 14d3f24fa: Further improve jsonb_sqljson parallel test
commit a6baa4bad: Documentation for SQL/JSON features
commit b46bcf7a4: Improve readability of SQL/JSON documentation.
commit 112fdb352: Fix finalization for json_objectagg and friends
commit fcdb35c32: Fix transformJsonBehavior
commit 4cd8717af: Improve a couple of sql/json error messages
commit f7a605f63: Small cleanups in SQL/JSON code
commit 9c3d25e17: Fix JSON_OBJECTAGG uniquefying bug
commit a79153b7a: Claim SQL standard compliance for SQL/JSON features
commit a1e7616d6: Rework SQL/JSON documentation
commit 8d9f9634e: Fix errors in copyfuncs/equalfuncs support for JSON node types.
commit 3c633f32b: Only allow returning string types or bytea from json_serialize
commit 67b26703b: expression eval: Fix EEOP_JSON_CONSTRUCTOR and EEOP_JSONEXPR size.
The release notes are also adjusted.
Backpatch to release 15.
Discussion: https://postgr.es/m/40d2c882-bcac-19a9-754d-4299e1d87ac7@postgresql.org
Building the ecpg tests with MSVC, with warnings enabled, results in the
following warning:
src/interfaces/ecpg/test/compat_informix/rnull.pgc(19,1): warning C4305: 'initializing': truncation from 'double' to 'float'
The more obvious fix would be an 'f' suffix, but ecpg can't parse that.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/2180a97c-c026-1b6c-cec8-d6e499f97017@enterprisedb.com
All the code and comments cleaned up here is irrelevant since 495ed0e.
Note that this removes an assumption that CreateRestrictedToken() may
not exist, something that could have happened when running under Windows
NT as the code stated. Rather than assuming that it may not exist, this
causes pg_ctl to fail hard if the function cannot be loaded.
Reported-by: Justin Pryzby
Discussion: https://postgr.es/m/20220826112637.GD2342@telsasoft.com
More than twenty years ago (79fcde48b), we hacked the postmaster
to avoid a core-dump on systems that didn't support fflush(NULL).
We've mostly, though not completely, hewed to that rule ever since.
But such systems are surely gone in the wild, so in the spirit of
cleaning out no-longer-needed portability hacks let's get rid of
multiple per-file fflush() calls in favor of using fflush(NULL).
Also, we were fairly inconsistent about whether to fflush() before
popen() and system() calls. While we've received no bug reports
about that, it seems likely that at least some of these call sites
are at risk of odd behavior, such as error messages appearing in
an unexpected order. Rather than expend a lot of brain cells
figuring out which places are at hazard, let's just establish a
uniform coding rule that we should fflush(NULL) before these calls.
A no-op fflush() is surely of trivial cost compared to launching
a sub-process via a shell; while if it's not a no-op then we likely
need it.
Discussion: https://postgr.es/m/2923412.1661722825@sss.pgh.pa.us
SUSv3 <netinet/in.h> defines struct sockaddr_in6, and all targeted Unix
systems have it. Windows has it in <ws2ipdef.h>. Remove the configure
probe, the macro and a small amount of dead code.
Also remove a mention of IPv6-less builds from the documentation, since
there aren't any.
This is similar to commits f5580882 and 077bf2f2 for Unix sockets. Even
though AF_INET6 is an "optional" component of SUSv3, there are no known
modern operating system without it, and it seems even less likely to be
omitted from future systems than AF_UNIX.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGKErNfhmvb_H0UprEmp4LPzGN06yR2_0tYikjzB-2ECMw@mail.gmail.com
In a similar effort to f01592f91, here we're targetting fixing the
warnings that -Wshadow=compatible-local produces that we can fix by moving
a variable to an inner scope to stop that variable from being shadowed by
another variable declared somewhere later in the function.
All of the warnings being fixed here are changing the scope of variables
which are being used as an iterator for a "for" loop. In each instance,
the fix happens to be changing the for loop to use the C99 type
initialization. Much of this code likely pre-dates our use of C99.
Reducing the scope of the outer scoped variable seems like the safest way
to fix these. Renaming seems more likely to risk patches using the wrong
variable. Reducing the scope is more likely to result in a compilation
failure after applying some future patch rather than introducing bugs with
it.
By my count, this takes the warning count from 129 down to 114.
Author: Justin Pryzby
Discussion: https://postgr.es/m/CAApHDvrwLGBP%2BYw9vriayyf%3DXR4uPWP5jr6cQhP9au_kaDUhbA%40mail.gmail.com
The ecpg tests have their input directory in the build directory, as the tests
need to be built. Until now that required copying the expected/ directory to
the build directory in VPATH builds. To avoid needing to implement the same
for the meson build, add support for specifying the location of the expected
directory.
Now that that's not needed anymore, remove the copying of ecpg's expected
directory to the build directory in VPATH builds.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20220718202327.pspcqz5mwbi2yb7w@awork3.anarazel.de
There's a convention that externally-visible libpq functions should
check for a NULL PGconn pointer, and fail gracefully instead of
crashing. PQflush() and PQisnonblocking() didn't get that memo
though. Also add a similar check to PQdefaultSSLKeyPassHook_OpenSSL;
while it's not clear that ordinary usage could reach that with a
null conn pointer, it's cheap enough to check, so let's be consistent.
Daniele Varrazzo and Tom Lane
Discussion: https://postgr.es/m/CA+mi_8Zm_mVVyW1iNFgyMd9Oh0Nv8-F+7Y3-BqwMgTMHuo_h2Q@mail.gmail.com
SUSv3, all targeted Unixes and modern Windows have getaddrinfo() and
related interfaces. Drop the replacement implementation, and adjust
some headers slightly to make sure that the APIs are visible everywhere
using standard POSIX headers and names.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKG%2BL_3brvh%3D8e0BW_VfX9h7MtwgN%3DnFHP5o7X2oZucY9dg%40mail.gmail.com
Since HAVE_UNIX_SOCKETS is now defined unconditionally, remove the macro
and drop a small amount of dead code.
The last known systems not to have them (as far as I know at least) were
QNX, which we de-supported years ago, and Windows, which now has them.
If a new OS ever shows up with the POSIX sockets API but without working
AF_UNIX, it'll presumably still be able to compile the code, and fail at
runtime with an unsupported address family error. We might want to
consider adding a HINT that you should turn off the option to use it if
your network stack doesn't support it at that point, but it doesn't seem
worth making the relevant code conditional at compile time.
Also adjust a couple of places in the docs and comments that referred to
builds without Unix-domain sockets, since there aren't any. Windows
still gets a special mention in those places, though, because we don't
try to use them by default there yet.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2BL_3brvh%3D8e0BW_VfX9h7MtwgN%3DnFHP5o7X2oZucY9dg%40mail.gmail.com
strtoll was backfilled with either __strtoll or strtoq on systems without
strtoll. The last such system on the buildfarm was an ancient HP-UX animal. We
don't support HP-UX anymore, so remove.
On other systems strtoll was present, but did not have a declaration. The last
known instance on the buildfarm was running an ancient OSX and shut down in
2019.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220804013546.h65najrzig764jar@awork3.anarazel.de
The common recipe when TAP tests are disabled doesn't work, because the
libpq-specific recipe wants to define the PATH environment variable, so
the starting '@' is misinterpreted as part of the command instead of
silencing said command.
Fix by setting the environment variable in a way that doesn't interfere
with the recipe.
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20220720172321.GL12702@telsasoft.com
This allows aliases for sub-SELECTs and VALUES clauses in the FROM
clause to be omitted.
This is an extension of the SQL standard, supported by some other
database systems, and so eases the transition from such systems, as
well as removing the minor inconvenience caused by requiring these
aliases.
Patch by me, reviewed by Tom Lane.
Discussion: https://postgr.es/m/CAEZATCUCGCf82=hxd9N5n6xGHPyYpQnxW8HneeH+uP7yNALkWA@mail.gmail.com
parse.pl and check_rules.pl used "no warnings 'uninitialized'",
which doesn't seem like it measures up to current project standards.
Removing that shows that it was hiding various places that accessed
off the end of an array, which are easily protected by minor logic
adjustments. There's no change in the script results.
While here, improve the Makefile rule that invokes these scripts.
It neglected to depend on check_rules.pl, so that editing that file
didn't result in re-running the check; and it ran check_rules.pl
after building preproc.y, so that if check_rules.pl did fail the
next "make" attempt would just bypass it. check_rules.pl failures
are sufficiently un-heard-of that I don't feel a need to back-patch
this.
Discussion: https://postgr.es/m/838180.1658181982@sss.pgh.pa.us
In db0a272d12 I used open(our $something, ...), which perlcritic doesn't
like. It looks like the warning is due to perlcritic knowing about 'my' but
not 'our' when checking for bareword file handles.
However, it's clearly unnecessary to use "our" here, change it to "my".
Via buildfarm member crake and discussion with Tom Lane.
Discussion: https://postgr.es/m/20220718215042.sl3hivoupdb7lkwv@awork3.anarazel.de
This is in preparation for building postgres with meson / ninja.
When building with meson, commands are run at the root of the build tree. Add
an option to put build output into the appropriate place. This can be utilized
by src/tools/msvc/ for a minor simplification, which also provides some
coverage for the new option.
Add option to generate a timestamp for check_rules.pl, so that proper
dependencies on it having been run can be generated.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/5e216522-ba3c-f0e6-7f97-5276d0270029@enterprisedb.com
This reverts commit 617d691412.
While I still think the basic idea is attractive, we need to sort
out what happens with built .c files, and there also seem to be
VPATH issues.
The backend already used a mechanically-generated list of *.c files,
but everywhere else we had a manually-written-out list of files in
which to seek translatable messages. Commit b0a55e432 contains the
latest in a long line of failures to update those lists. Rather than
manually fix its oversight, let's change to using "$(wildcard *.c)"
in all these nls.mk files.
Many of these files also have manual references to some *.c files
in other directories, most often src/common/. Perhaps we should try
to improve that situation too; but it's a bit less clear how, so for
now just fix the local file references.
Kyotaro Horiguchi and Tom Lane
Discussion: https://postgr.es/m/20220713.160853.453362706160476128.horikyota.ntt@gmail.com
Commit 054325c5ee created a memory leak in PQsendQueryInternal in case
an error occurs while sending the message. Repair.
Backpatch to 14, like that commit. Reported by Coverity.
This moves the list of available languages from nls.mk into a separate
file called po/LINGUAS. Advantages:
- It keeps the parts notionally managed by programmers (nls.mk)
separate from the parts notionally managed by translators (LINGUAS).
- It's the standard practice recommended by the Gettext manual
nowadays.
- The Meson build system also supports this layout (and of course
doesn't know anything about our custom nls.mk), so this would enable
sharing the list of languages between the two build systems.
(The MSVC build system currently finds all po files by globbing, so it
is not affected by this change.)
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/557a9f5c-e871-edc7-2f58-a4140fb65b7b@enterprisedb.com
Previously, ECPG could only cope with variable declarations whose
type names either weren't any SQL keyword, or were at least partially
reserved. If you tried to use something in the unreserved_keyword
category, you got a syntax error.
This is pretty awful, not only because it says right on the tin that
those words are not reserved, but because the set of such keywords
tends to grow over time. Thus, an ECPG program that was just fine
last year could fail when recompiled with a newer SQL grammar.
We had to work around this recently when STRING became a keyword,
but it's time for an actual fix instead of a band-aid.
To fix, borrow a trick from C parsers and make the lexer's behavior
change when it sees a word that is known as a typedef. This is not
free of downsides: if you try to use such a name as a SQL keyword
in EXEC SQL later in the program, it won't be recognized as a SQL
keyword, leading to a syntax error there instead. So in a real
sense this is just trading one hazard for another. But there is an
important difference: with this, whether your ECPG program works
depends only on what typedef names and SQL commands are used in the
program text. If it compiles today it'll still compile next year,
even if more words have become SQL keywords.
Discussion: https://postgr.es/m/3661437.1653855582@sss.pgh.pa.us
We were going into IDLE state too soon when executing queries via
PQsendQuery in pipeline mode, causing several scenarios to misbehave in
different ways -- most notably, as reported by Daniele Varrazzo, that a
warning message is produced by libpq:
message type 0x33 arrived from server while idle
But it is also possible, if queries are sent and results consumed not in
lockstep, for the expected mediating NULL result values from PQgetResult
to be lost (a problem which has not been reported, but which is more
serious).
Fix this by introducing two new concepts: one is a command queue element
PGQUERY_CLOSE to tell libpq to wait for the CloseComplete server
response to the Close message that is sent by PQsendQuery. Because the
application is not expecting any PGresult from this, the mechanism to
consume it is a bit hackish.
The other concept, authored by Horiguchi-san, is a PGASYNC_PIPELINE_IDLE
state for libpq's state machine to differentiate "really idle" from
merely "the idle state that occurs in between reading results from the
server for elements in the pipeline". This makes libpq not go fully
IDLE when the libpq command queue contains entries; in normal cases, we
only go IDLE once at the end of the pipeline, when the server response
to the final SYNC message is received. (However, there are corner cases
it doesn't fix, such as terminating the query sequence by
PQsendFlushRequest instead of PQpipelineSync; this sort of scenario is
what requires PGQUERY_CLOSE bit above.)
This last bit helps make the libpq state machine clearer; in particular
we can get rid of an ugly hack in pqParseInput3 to avoid considering
IDLE as such when the command queue contains entries.
A new test mode is added to libpq_pipeline.c to tickle some related
problematic cases.
Reported-by: Daniele Varrazzo <daniele.varrazzo@gmail.com>
Co-authored-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/CA+mi_8bvD0_CW3sumgwPvWdNzXY32itoG_16tDYRu_1S2gV2iw@mail.gmail.com
Per buildfarm member prairiedog, this platform rejects uninitialized
global variables in shared libraries. Back-patch to v10, like the
addition of the variable.
Reviewed by Tom Lane.
Discussion: https://postgr.es/m/20220703030619.GB2378460@rfd.leadboat.com
ecpglib has been calling it once per SQL query and once per EXEC SQL GET
DESCRIPTOR. Instead, if newlocale() has not succeeded before, call it
while establishing a connection. This mitigates three problems:
- If newlocale() failed in EXEC SQL GET DESCRIPTOR, the command silently
proceeded without the intended locale change.
- On AIX, each newlocale()+freelocale() cycle leaked memory.
- newlocale() CPU usage may have been nontrivial.
Fail the connection attempt if newlocale() fails. Rearrange
ecpg_do_prologue() to validate the connection before its uselocale().
The sort of program that may regress is one running in an environment
where newlocale() fails. If that program establishes connections
without running SQL statements, it will stop working in response to this
change. I'm betting against the importance of such an ECPG use case.
Most SQL execution (any using ECPGdo()) has long required newlocale()
success, so there's little a connection could do without newlocale().
Back-patch to v10 (all supported versions).
Reviewed by Tom Lane. Reported by Guillaume Lelarge.
Discussion: https://postgr.es/m/20220101074055.GA54621@rfd.leadboat.com
If an application executed operations like EXEC SQL PREPARE
without having first established a database connection, it could
get a core dump instead of the expected clean failure. This
occurred because we did "pthread_getspecific(actual_connection_key)"
without ever having initialized the TSD key actual_connection_key.
The results of that are probably platform-specific, but at least
on Linux it often leads to a crash.
To fix, add calls to ecpg_pthreads_init() in the code paths that
might use actual_connection_key uninitialized. It's harmless
(and hopefully inexpensive) to do that more than once.
Per bug #17514 from Okano Naoki. The problem's ancient, so
back-patch to all supported branches.
Discussion: https://postgr.es/m/17514-edd4fad547c5692c@postgresql.org
An error PGresult generated by libpq itself, such as a report of
connection loss, won't have broken-down error fields.
ecpg_raise_backend() blithely assumed that PG_DIAG_MESSAGE_PRIMARY
would always be present, and would end up passing a NULL string
pointer to snprintf when it isn't. That would typically crash
before 3779ac62d, and it would fail to provide a useful error report
in any case. Best practice is to substitute PQerrorMessage(conn)
in such cases, so do that.
Per bug #17421 from Masayuki Hirose. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17421-790ff887e3188874@postgresql.org
Commit 1a36bc9db (SQL/JSON query functions) introduced STRING as a
type_func_name_keyword, thereby breaking applications that use
"string" as a table name, column name, function parameter name, etc.
That seems like a pretty bad thing, not least because the SQL spec
says that STRING is an unreserved keyword.
This is easy enough to fix so far as the core grammar is concerned.
However, doing so causes some ECPG test cases to fail, specifically
those that use "string" as a typedef name. It turns out this is
because portions of the ECPG grammar allow type_func_name_keywords
but not unreserved_keywords as typedef names. That's pretty horrid,
and it's mildly astonishing that we've not heard complaints about it
before. We can fix two of those uses trivially, but the ones in the
var_type production are less easy. As a stopgap, hard-code STRING as
an allowed alternative in var_type.
Per report from Alastair McKinley.
Discussion: https://postgr.es/m/3661437.1653855582@sss.pgh.pa.us
Commits a59c79564 et al. tried to sync libpq's SSL key file
permissions checks with what we've used for years in the backend.
We did not intend to create any new failure cases, but it turns out
we did: restricting the key file's ownership breaks cases where the
client is allowed to read a key file despite not having the identical
UID. In particular a client running as root used to be able to read
someone else's key file; and having seen that I suspect that there are
other, less-dubious use cases that this restriction breaks on some
platforms.
We don't really need an ownership check, since if we can read the key
file despite its having restricted permissions, it must have the right
ownership --- under normal conditions anyway, and the point of this
patch is that any additional corner cases where that works should be
deemed allowable, as they have been historically. Hence, just drop
the ownership check, and rearrange the permissions check to get rid
of its faulty assumption that geteuid() can't be zero. (Note that the
comparable backend-side code doesn't have to cater for geteuid() == 0,
since the server rejects that very early on.)
This does have the end result that the permissions safety check used
for a root user's private key file is weaker than that used for
anyone else's. While odd, root really ought to know what she's doing
with file permissions, so I think this is acceptable.
Per report from Yogendra Suralkar. Like the previous patch,
back-patch to all supported branches.
Discussion: https://postgr.es/m/MW3PR15MB3931DF96896DC36D21AFD47CA3D39@MW3PR15MB3931.namprd15.prod.outlook.com
The original coding did this in pqDropServerData(), which seems
fairly backwards. Pending commands are more like already-queued
output data, which is dropped in pqDropConnection(). Moving the
operation means that we clear the command queue immediately upon
detecting connection drop, which improves the sanity of subsequent
behavior. In particular this eliminates duplicated error message
text as a consequence of code added in b15f25446, which supposed
that a nonempty command queue must mean the prior operation is
still active.
There might be an argument for backpatching this to v14; but as with
b15f25446, I'm unsure about interactions with 618c16707. For now,
given the lack of complaints about v14's behavior, leave it alone.
Per report from Peter Eisentraut.
Discussion: https://postgr.es/m/de57761c-b99b-3435-b0a6-474c72b1149a@enterprisedb.com
The testclient and uri-regress programs in the libpq test suite had
quite generic names which didn't convey much meaning. Since they are
installed as part of the MSVC test runs, ensure that their purpose
is a little bit clearer by renaming with a libpq_ prefix. While at
it rename uri-regress to uri_regress to avoid mixing dash and under-
score in the same filename.
Reported-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20220501080706.GA1542365@rfd.leadboat.com
Commit 618c16707 invented an "error_result" flag in PGconn, which
intends to represent the state that we have an error condition and
need to build a PGRES_FATAL_ERROR PGresult from the message text in
conn->errorMessage, but have not yet done so. (Postponing construction
of the error object simplifies dealing with out-of-memory conditions
and with concatenation of messages for multiple errors.) For nearly all
purposes, this "virtual" PGresult object should act the same as if it
were already materialized. But a couple of places in fe-protocol3.c
didn't get that memo, and were only testing conn->result as they used
to, without also checking conn->error_result.
In hopes of reducing the probability of similar mistakes in future,
I invented a pgHavePendingResult() macro that includes both tests.
Per report from Peter Eisentraut.
Discussion: https://postgr.es/m/b52277b9-fa66-b027-4a37-fb8989c73ff8@enterprisedb.com
The target failed, tested $PATH binaries, or tested a stale temporary
installation. Commit c66b438db6 missed
this. Back-patch to v10 (all supported versions).
The current implementation supports exactly one IP address in a server
certificate's Common Name, which is brittle (the strings must match
exactly). This patch adds support for IPv4 and IPv6 addresses in a
server's Subject Alternative Names.
Per discussion on-list:
- If the client's expected host is an IP address, we allow fallback to
the Subject Common Name if an iPAddress SAN is not present, even if
a dNSName is present. This matches the behavior of NSS, in
violation of the relevant RFCs.
- We also, counter-intuitively, match IP addresses embedded in dNSName
SANs. From inspection this appears to have been the behavior since
the SAN matching feature was introduced in acd08d76.
- Unlike NSS, we don't map IPv4 to IPv6 addresses, or vice-versa.
Author: Jacob Champion <pchampion@vmware.com>
Co-authored-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Co-authored-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/flat/9f5f20974cd3a4091a788cf7f00ab663d5fcdffe.camel@vmware.com
Currently, libpq client code must have a connection handle
before it can query the "library" SSL attribute. This poses
problems if the client needs to know what SSL library is in
use before constructing a connection string.
Allow PQsslAttribute(NULL, "library") to return the library
in use -- currently, just "OpenSSL" or NULL. The new behavior
is announced with the LIBPQ_HAS_SSL_LIBRARY_DETECTION feature
macro, allowing clients to differentiate between a libpq that
was compiled without SSL support and a libpq that's just too
old to tell.
Author: Jacob Champion <pchampion@vmware.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/4c8b76ef434a96627170a31c3acd33cbfd6e41f1.camel@vmware.com
MERGE performs actions that modify rows in the target table using a
source table or query. MERGE provides a single SQL statement that can
conditionally INSERT/UPDATE/DELETE rows -- a task that would otherwise
require multiple PL statements. For example,
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular tables, partitioned tables and inheritance
hierarchies, including column and row security enforcement, as well as
support for row and statement triggers and transition tables therein.
MERGE is optimized for OLTP and is parameterizable, though also useful
for large scale ETL/ELT. MERGE is not intended to be used in preference
to existing single SQL commands for INSERT, UPDATE or DELETE since there
is some overhead. MERGE can be used from PL/pgSQL.
MERGE does not support targetting updatable views or foreign tables, and
RETURNING clauses are not allowed either. These limitations are likely
fixable with sufficient effort. Rewrite rules are also not supported,
but it's not clear that we'd want to support them.
Author: Pavan Deolasee <pavan.deolasee@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Simon Riggs <simon.riggs@enterprisedb.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions)
Reviewed-by: Peter Geoghegan <pg@bowt.ie> (earlier versions)
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Reviewed-by: Japin Li <japinli@hotmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
Discussion: https://postgr.es/m/20201231134736.GA25392@alvherre.pgsql
This patch introduces the SQL/JSON standard constructors for JSON:
JSON()
JSON_ARRAY()
JSON_ARRAYAGG()
JSON_OBJECT()
JSON_OBJECTAGG()
For the most part these functions provide facilities that mimic
existing json/jsonb functions. However, they also offer some useful
additional functionality. In addition to text input, the JSON() function
accepts bytea input, which it will decode and constuct a json value from.
The other functions provide useful options for handling duplicate keys
and null values.
This series of patches will be followed by a consolidated documentation
patch.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Move DLSUFFIX from makefiles into header files for all platforms.
Move the DLSUFFIX assignment from src/makefiles/ to src/templates/,
have configure read it, and then substitute it into Makefile.global
and pg_config.h. This avoids the need for all makefile rules that
need it to locally set CPPFLAGS. It also resolves an inconsistent
setup between the two Windows build systems.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/2f9861fb-8969-9005-7518-b8e60f2bead9@enterprisedb.com
pg_regress reported "Unix socket" as the default location whenever
HAVE_UNIX_SOCKETS is defined. However, that's not been accurate
on Windows since 8f3ec75de. Update this logic to match what libpq
actually does now.
This is just cosmetic, but still it's potentially misleading.
Back-patch to v13 where 8f3ec75de came in.
Discussion: https://postgr.es/m/3894060.1646415641@sss.pgh.pa.us
This change makes libpq apply the same private-key-file ownership
and permissions checks that we have used in the backend since commit
9a83564c5. Namely, that the private key can be owned by either the
current user or root (with different file permissions allowed in the
two cases). This allows system-wide management of key files, which
is just as sensible on the client side as the server, particularly
when the client is itself some application daemon.
Sync the comments about this between libpq and the backend, too.
David Steele
Discussion: https://postgr.es/m/f4b7bc55-97ac-9e69-7398-335e212f7743@pgmasters.net
Since commit ffa2e4670, libpq resets conn->errorMessage only when
starting a new query. However, the later introduction of pipelining
requires a further refinement: the "start of query" isn't necessarily
when it's submitted to PQsendQueryStart. If we clear at that point
then we risk dropping text for an error that the application has not
noticed yet. Instead, when queuing a query while a previous query is
still in flight, leave errorMessage alone; reset it when we begin
to process the next query in pqPipelineProcessQueue.
Perhaps this should be back-patched to v14 where ffa2e4670 came in.
However I'm uncertain about whether it interacts with 618c16707.
In the absence of user complaints, leave v14 alone.
Discussion: https://postgr.es/m/1421785.1645723238@sss.pgh.pa.us
The old form of the test needed a bunch of custom infrastructure. These days
tap tests provide the necessary infrastructure to do better.
We discussed whether to move this test to src/test/modules, alongside
libpq_pipeline, but concluded that the opposite direction would be
better. libpq_pipeline will be moved at a later date, once the buildfarm and
msvc build infrastructure is ready for it.
The invocation of the tap test will be added in the next commit. It involves
just enough buildsystem changes to be worth commiting separately. Can't happen
the other way round because prove errors out when invoked without tests.
Discussion: https://postgr.es/m/20220223203031.ezrd73ohvjgfksow@alap3.anarazel.de
Oversight in commit 618c16707. This is mainly neatnik-ism, since
if PQrequestCancel is used per its API contract, we should perform
pqClearConnErrorState before reaching any place that would consult
errorReported. But still, it seems like a bad idea to potentially
leave errorReported pointing past errorMessage.len.
Since commit ffa2e4670, libpq accumulates text in conn->errorMessage
across a whole query cycle. In some situations, we may report more
than one error event within a cycle: the easiest case to reach is
where we report a FATAL error message from the server, and then a
bit later we detect loss of connection. Since, historically, each
error PGresult bears the entire content of conn->errorMessage,
this results in duplication of the FATAL message in any output that
concatenates the contents of the PGresults.
Accumulation in errorMessage still seems like a good idea, especially
in view of the number of places that did ad-hoc error concatenation
before ffa2e4670. So to fix this, let's track how much of
conn->errorMessage has been read out into error PGresults, and only
include new text in later PGresults. The tricky part of that is
to be sure that we never discard an error PGresult once made (else
we'd risk dropping some text, a problem much worse than duplication).
While libpq formerly did that in some code paths, a little bit of
rearrangement lets us postpone making an error PGresult at all until
we are about to return it.
A side benefit of that postponement is that it now becomes practical
to return a dummy static PGresult in cases where we hit out-of-memory
while trying to manufacture an error PGresult. This eliminates the
admittedly-very-rare case where we'd return NULL from PQgetResult,
indicating successful query completion, even though what actually
happened was an OOM failure.
Discussion: https://postgr.es/m/ab4288f8-be5c-57fb-2400-e3e857f53e46@enterprisedb.com
As currently implemented, failure of a PGEVT_CONNRESET callback
forces the PGconn into the CONNECTION_BAD state (without closing
the socket, which is inconsistent with other failure paths), and
prevents later callbacks from being called. This seems highly
questionable, and indeed is questioned by comments in the source.
Instead, let's just ignore the result value of PGEVT_CONNRESET
calls. Like the preceding commit, this converts event callbacks
into "pure observers" that cannot affect libpq's processing logic.
Discussion: https://postgr.es/m/3185105.1644960083@sss.pgh.pa.us
As currently implemented, failure of a PGEVT_RESULTCREATE callback
causes the PGresult to be converted to an error result. This is
intellectually inconsistent (shouldn't a failing callback likewise
prevent creation of the error result? what about side-effects on the
behavior seen by other event procs? why does PQfireResultCreateEvents
act differently from PQgetResult?), but more importantly it destroys
any promises we might wish to make about the behavior of libpq in
nontrivial operating modes, such as pipeline mode. For example,
it's not possible to promise that PGRES_PIPELINE_SYNC results will
be returned if an event callback fails on those. With this
definition, expecting applications to behave sanely in the face of
possibly-failing callbacks seems like a very big lift.
Hence, redefine the result of a callback failure as being simply
that that event procedure won't be called any more for this PGresult
(which was true already). Event procedures can still signal failure
back to the application through out-of-band mechanisms, for example
via their passthrough arguments.
Similarly, don't let failure of a PGEVT_RESULTCOPY callback prevent
PQcopyResult from succeeding. That definition allowed a misbehaving
event proc to break single-row mode (our sole internal use of
PQcopyResult), and it probably had equally deleterious effects for
outside uses.
Discussion: https://postgr.es/m/3185105.1644960083@sss.pgh.pa.us
After this, the PostgreSQL lexers no longer accept numeric literals
with trailing non-digits, such as 123abc, which would be scanned as
two tokens: 123 and abc. This is undocumented and surprising, and it
might also interfere with some extended numeric literal syntax being
contemplated for the future.
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/b239564c-cad0-b23e-c57e-166d883cb97d@enterprisedb.com
The AF_UNIX macro was being used unprotected by HAVE_UNIX_SOCKETS,
apparently since 2008. So the redirection through IS_AF_UNIX() is
apparently no longer necessary. (More generally, all supported
platforms are now HAVE_UNIX_SOCKETS, but even if there were a new
platform in the future, it seems plausible that it would define the
AF_UNIX symbol even without kernel support.) So remove the
IS_AF_UNIX() macro and make the code a bit more consistent.
Discussion: https://www.postgresql.org/message-id/flat/f2d26815-9832-e333-d52d-72fbc0ade896%40enterprisedb.com
Commit 1f39a1c06 implemented write-failure postponement in pqSendSome,
which is above SSL/GSS processing. However, we've now seen failures
indicating that (some versions of?) OpenSSL have a tendency to report
write failures prematurely too. Hence, move the primary responsibility
for postponing write failures down to pqsecure_raw_write(), below
SSL/GSS processing. pqSendSome now sets write_failed only in corner
cases where we'd lost the connection already.
A side-effect of this change is that errors detected in the SSL/GSS
layer itself will be reported immediately (as if they were read
errors) rather than being postponed like write errors. That's
reverting an effect of 1f39a1c06, and I think it's fine: if there's
not a socket-level error, it's hard to be sure whether an OpenSSL
error ought to be considered a read or write failure anyway.
Another important point is that write-failure postponement is now
effective during connection setup. OpenSSL's misbehavior of this
sort occurs during SSL_connect(), so that's a change we want.
Per bug #17391 from Nazir Bilal Yavuz. Possibly this should be
back-patched, but I think it prudent to let it age awhile in HEAD
first.
Discussion: https://postgr.es/m/17391-304f81bcf724b58b@postgresql.org
In commit 1f39a1c06 I made PQisBusy consider conn->write_failed, but
that is now looking like complete brain fade. In the first place, the
logic is quite wrong: it ought to be like "and not" rather than "or".
This meant that once we'd gotten into a write_failed state, PQisBusy
would always return true, probably causing the calling application to
iterate its loop until PQconsumeInput returns a hard failure thanks
to connection loss. That's not what we want: the intended behavior
is to return an error PGresult, which the application probably has
much cleaner support for.
But in the second place, checking write_failed here seems like the
wrong thing anyway. The idea of the write_failed mechanism is to
postpone handling of a write failure until we've read all we can from
the server; so that flag should not interfere with input-processing
behavior. (Compare 7247e243a.) What we *should* check for is
status = CONNECTION_BAD, ie, socket already closed. (Most places that
close the socket don't touch asyncStatus, but they do reset status.)
This primarily ensures that if PQisBusy() returns true then there is
an open socket, which is assumed by several call sites in our own
code, and probably other applications too.
While at it, fix a nearby thinko in libpq's my_sock_write: we should
only consult errno for res < 0, not res == 0. This is harmless since
pqsecure_raw_write would force errno to zero in such a case, but it
still could confuse readers.
Noted by Andres Freund. Backpatch to v12 where 1f39a1c06 came in.
Discussion: https://postgr.es/m/20220211011025.ek7exh6owpzjyudn@alap3.anarazel.de
In libpq and ecpglib, multiple threads can concurrently enter the
initialization logic for message localization. Since we set the
its-done flag before actually doing the work, it'd be possible
for some threads to reach gettext() before anyone has called
bindtextdomain(). Barring bugs in libintl itself, this would not
result in anything worse than failure to localize some early
messages. Nonetheless, it's a bug, and an easy one to fix.
Noted while investigating bug #17299 from Clemens Zeidler
(much thanks to Liam Bowen for followup investigation on that).
It currently appears that that actually *is* a bug in libintl itself,
but that doesn't let us off the hook for this bit.
Back-patch to all supported versions.
Discussion: https://postgr.es/m/17299-7270741958c0b1ab@postgresql.org
Discussion: https://postgr.es/m/CAE7q7Eit4Eq2=bxce=Fm8HAStECjaXUE=WBQc-sDDcgJQ7s7eg@mail.gmail.com
If connectivity to the server has been lost or become flaky, the
user might well try to send a query cancel. It's highly annoying
if PQcancel hangs up in such a case, but that's exactly what's likely
to happen. To ameliorate this problem, apply the PGconn's
tcp_user_timeout and keepalives settings to the TCP connection used
to send the cancel. This should be safe on Unix machines, since POSIX
specifies that setsockopt() is async-signal-safe. We are guessing
that WSAIoctl(SIO_KEEPALIVE_VALS) is similarly safe on Windows.
(Note that at least in psql and our other frontend programs, there's
no safety issue involved anyway, since we run PQcancel in its own
thread rather than in a signal handler.)
Most of the value here comes from the expectation that tcp_user_timeout
will be applied as a connection timeout. That appears to happen on
Linux, even though its tcp(7) man page claims differently. The
keepalive options probably won't help much, but as long as we can
apply them for not much code, we might as well.
Jelte Fennema, reviewed by Fujii Masao and myself
Discussion: https://postgr.es/m/AM5PR83MB017870DE81FC84D5E21E9D1EF7AA9@AM5PR83MB0178.EURPRD83.prod.outlook.com
PQcancel() is supposed to be safe to call from a signal handler,
and indeed psql uses it that way. All of the library functions
it uses are specified to be async-signal-safe by POSIX ...
except for strerror. Neither plain strerror nor strerror_r
are considered safe. When this code was written, back in the
dark ages, we probably figured "oh, strerror will just index
into a constant array of strings" ... but in any locale except C,
that's unlikely to be true. Probably the reason we've not heard
complaints is that (a) this error-handling code is unlikely to be
reached in normal use, and (b) in many scenarios, localized error
strings would already have been loaded, after which maybe it's
safe to call strerror here. Still, this is clearly unacceptable.
The best we can do without relying on strerror is to print the
decimal value of errno, so make it do that instead. (This is
probably not much loss of user-friendliness, given that it is
hard to get a failure here.)
Back-patch to all supported branches.
Discussion: https://postgr.es/m/2937814.1641960929@sss.pgh.pa.us
This is similar to b69aba7, except that this completes the work for
HMAC with a new routine called pg_hmac_error() that would provide more
context about the type of error that happened during a HMAC computation:
- The fallback HMAC implementation in hmac.c relies on cryptohashes, so
in some code paths it is necessary to return back the error generated by
cryptohashes.
- For the OpenSSL implementation (hmac_openssl.c), the logic is very
similar to cryptohash_openssl.c, where the error context comes from
OpenSSL if one of its internal routines failed, with different error
codes if something internal to hmac_openssl.c failed or was incorrect.
Any in-core code paths that use the centralized HMAC interface are
related to SCRAM, for errors that are unlikely going to happen, with
only SHA-256. It would be possible to see errors when computing some
HMACs with MD5 for example and OpenSSL FIPS enabled, and this commit
would help in reporting the correct errors but nothing in core uses
that. So, at the end, no backpatch to v14 is done, at least for now.
Errors in SCRAM related to the computation of the server key, stored
key, etc. need to pass down the potential error context string across
more layers of their respective call stacks for the frontend and the
backend, so each surrounding routine is adapted for this purpose.
Reviewed-by: Sergey Shinderuk
Discussion: https://postgr.es/m/Yd0N9tSAIIkFd+qi@paquier.xyz
The point of this patch is to reduce inclusion spam by not needing
to #include <netdb.h> or <pwd.h> in port.h (which is read by every
compile in our tree). To do that, we must remove port.h's
declarations of pqGetpwuid and pqGethostbyname.
pqGethostbyname is only used, and is only ever likely to be used,
in src/port/getaddrinfo.c --- which isn't even built on most
platforms, making pqGethostbyname dead code for most people.
Hence, deal with that by just moving it into getaddrinfo.c.
To clean up pqGetpwuid, invent a couple of simple wrapper
functions with less-messy APIs. This allows removing some
duplicate error-handling code, too.
In passing, remove thread.c from the MSVC build, since it
contains nothing we use on Windows.
Noted while working on 376ce3e40.
Discussion: https://postgr.es/m/1634252654444.90107@mit.edu
Experimenting with FIPS mode enabled, I saw
regression=# \password joe
Enter new password for user "joe":
Enter it again:
could not encrypt password: disabled for FIPS
out of memory
because PQencryptPasswordConn was still of the opinion that "out of
memory" is always appropriate to print.
Minor oversight in b69aba745. Like that one, back-patch to v14.
The existing cryptohash facility was causing problems in some code paths
related to MD5 (frontend and backend) that relied on the fact that the
only type of error that could happen would be an OOM, as the MD5
implementation used in PostgreSQL ~13 (the in-core implementation is
used when compiling with or without OpenSSL in those older versions),
could fail only under this circumstance.
The new cryptohash facilities can fail for reasons other than OOMs, like
attempting MD5 when FIPS is enabled (upstream OpenSSL allows that up to
1.0.2, Fedora and Photon patch OpenSSL 1.1.1 to allow that), so this
would cause incorrect reports to show up.
This commit extends the cryptohash APIs so as callers of those routines
can fetch more context when an error happens, by using a new routine
called pg_cryptohash_error(). The error states are stored within each
implementation's internal context data, so as it is possible to extend
the logic depending on what's suited for an implementation. The default
implementation requires few error states, but OpenSSL could report
various issues depending on its internal state so more is needed in
cryptohash_openssl.c, and the code is shaped so as we are always able to
grab the necessary information.
The core code is changed to adapt to the new error routine, painting
more "const" across the call stack where the static errors are stored,
particularly in authentication code paths on variables that provide
log details. This way, any future changes would warn if attempting to
free these strings. The MD5 authentication code was also a bit blurry
about the handling of "logdetail" (LOG sent to the postmaster), so
improve the comments related that, while on it.
The origin of the problem is 87ae969, that introduced the centralized
cryptohash facility. Extra changes are done for pgcrypto in v14 for the
non-OpenSSL code path to cope with the improvements done by this
commit.
Reported-by: Michael Mühlbeyer
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/89B7F072-5BBE-4C92-903E-D83E865D9367@trivadis.com
Backpatch-through: 14
When we need to identify the home directory on non-Windows, first
consult getenv("HOME"). If that's empty or unset, fall back
on our previous method of checking the <pwd.h> database.
Preferring $HOME allows the user to intentionally point at some
other directory, and it seems to be in line with the behavior of
most other utilities. However, we shouldn't rely on it completely,
as $HOME is likely to be unset when running as a daemon.
Anders Kaseorg
Discussion: https://postgr.es/m/1634252654444.90107@mit.edu
"git mv" all the input/*.source and output/*.source files into
the corresponding sql/ and expected/ directories. Then remove
the pg_regress and Makefile infrastructure associated with
dynamic translation.
Discussion: https://postgr.es/m/1655733.1639871614@sss.pgh.pa.us
If the stat operation on the private key failed, the code assumed it
was due to an ENOENT, which may or may not be true. Extend the check
by printing a different error message on non-ENOENT errors for easier
debugging.
Per suggestion by Tom Lane due to an issue with the fairywren animal
in the buildfarm.
Discussion: https://postgr.es/m/1632478.1638305700@sss.pgh.pa.us
This check was used to accommodate a staggering variety in particular
in the type of the third argument of accept(). This is no longer of
concern on currently supported systems. We can just use socklen_t in
the code and put in a simple check that substitutes int for socklen_t
if it's missing, to cover the few stragglers.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/3538f4c4-1886-64f2-dcff-aaad8267fb82@enterprisedb.com
libpq collects up to a bufferload of data whenever it reads data from
the socket. When SSL or GSS encryption is requested during startup,
any additional data received with the server's yes-or-no reply
remained in the buffer, and would be treated as already-decrypted data
once the encryption handshake completed. Thus, a man-in-the-middle
with the ability to inject data into the TCP connection could stuff
some cleartext data into the start of a supposedly encryption-protected
database session.
This could probably be abused to inject faked responses to the
client's first few queries, although other details of libpq's behavior
make that harder than it sounds. A different line of attack is to
exfiltrate the client's password, or other sensitive data that might
be sent early in the session. That has been shown to be possible with
a server vulnerable to CVE-2021-23214.
To fix, throw a protocol-violation error if the internal buffer
is not empty after the encryption handshake.
Our thanks to Jacob Champion for reporting this problem.
Security: CVE-2021-23222
After further investigation, it seems the cause of the problem
is our recent decision to start defining WIN32_LEAN_AND_MEAN.
That causes <windows.h> to no longer include <wincrypt.h>, which
means that the OpenSSL headers are unable to prevent conflicts
with that header by #undef'ing the conflicting macros. Apparently,
some other system header that be-secure-openssl.c #includes after
the OpenSSL headers is pulling in <wincrypt.h>. It's obscure just
where that happens and why we're not seeing it on other Windows
buildfarm animals. However, it should work to move the OpenSSL
#includes to the end of the list. For the sake of future-proofing,
do likewise in fe-secure-openssl.c. In passing, remove useless
double inclusions of <openssl/ssl.h>.
Thanks to Thomas Munro for running down the relevant information.
Discussion: https://postgr.es/m/1051867.1635720347@sss.pgh.pa.us
