On many modern platforms, /etc/localtime is a symlink to a file within the
IANA database. Reading the symlink lets us find out the name of the system
timezone directly, without going through the brute-force search embodied in
scan_available_timezones(). This shortens the runtime of initdb by some
tens of ms, which is helpful for the buildfarm, and it also allows us to
reliably select the same zone name the system was actually configured for,
rather than possibly choosing one of IANA's many zone aliases. (For
example, in a system configured for "Asia/Tokyo", the brute-force search
would not choose that name but its alias "Japan", on the grounds of the
latter string being shorter. More surprisingly, "Navajo" is preferred
to either "America/Denver" or "US/Mountain", as seen in an old complaint
from Josh Berkus.)
If /etc/localtime doesn't exist, or isn't a symlink, or we can't make
sense of its contents, or the contents match a zone we know but that
zone doesn't match the observed behavior of localtime(), fall back to
the brute-force search.
Also, tweak initdb so that it prints the zone name it selected.
In passing, replace the last few references to the "Olson" database in
code comments with "IANA", as that's been our preferred term since
commit b2cbced9e.
Back-patch of commit 23bd3cec6. The original intention was to not
back-patch, since this can result in cosmetic behavioral changes ---
for example, on my own workstation initdb now chooses "America/New_York",
where it used to prefer "US/Eastern" which is equivalent and shorter.
However, our hand has been more or less forced by tzdb update 2019a,
which made the "UCT" zone fully equivalent to "UTC". Our old code
now prefers "UCT" on the grounds of it being alphabetically first,
and that's making nobody happy. Choosing the alias indicated by
/etc/localtime is a more defensible behavior. (Users who don't like
the results can always force the decision by setting the TZ environment
variable before running initdb.)
Patch by me, per a suggestion from Robert Haas; review by Michael Paquier
Discussion: https://postgr.es/m/7408.1525812528@sss.pgh.pa.us
Discussion: https://postgr.es/m/20190604085735.GD24018@msg.df7cb.de
The Bison documentation clearly states that a semicolon is required
after every grammar rule, and our scripts that generate ecpg's
grammar from the backend's implicitly assumed this is true. But it
turns out that only ancient versions of Bison actually enforce that.
There have been a couple of rules without trailing semicolons in
gram.y for some time, and as a consequence, ecpg's grammar was faulty
and produced wrong output for the affected statements.
To fix, add the missing semis, and add some cross-checks to ecpg's
scripts so that they'll bleat if we mess this up again.
The cases that were broken were:
* "SET variable = DEFAULT" (but not "SET variable TO DEFAULT"),
as well as allied syntaxes such as ALTER SYSTEM SET ... DEFAULT.
These produced syntactically invalid output that the server
would reject.
* Multiple type names in DROP TYPE/DOMAIN commands. Only the
first type name would be listed in the emitted command.
Per report from Daisuke Higuchi. Back-patch to all supported versions.
Discussion: https://postgr.es/m/1803D792815FC24D871C00D17AE95905DB51CE@g01jpexmbkw24
A report from Andrew Dunstan showed that an ecpglib breakage that
causes repeated query failures could lead to infinite loops in some
ecpg test scripts, because they contain "while(1)" loops with no
exit condition other than successful test completion. That might
be all right for manual testing, but it seems entirely unacceptable
for automated test environments such as our buildfarm. We don't
want buildfarm owners to have to intervene manually when a test
goes wrong.
To fix, just change all those while(1) loops to exit after at most
100 iterations (which is more than any of them expect to iterate).
This seems sufficient since we'd see discrepancies in the test output
if any loop executed the wrong number of times.
I tested this by dint of intentionally breaking ecpg_do_prologue
to always fail, and verifying that the tests still got to completion.
Back-patch to all supported branches, since the whole point of this
exercise is to protect the buildfarm against future mistakes.
Discussion: https://postgr.es/m/18693.1548302004@sss.pgh.pa.us
Apparently, some builds of MinGW contain a version of
_configthreadlocale() that always returns -1, indicating failure.
Rather than treating that as a curl-up-and-die condition, soldier on
as though the function didn't exist. This leaves us without thread
safety on such MinGW versions, but we didn't have it anyway.
Discussion: https://postgr.es/m/d06a16bc-52d6-9f0d-2379-21242d7dbe81@2ndQuadrant.com
ecpglib attempts to force the LC_NUMERIC locale to "C" while reading
server output, to avoid problems with strtod() and related functions.
Historically it's just issued setlocale() calls to do that, but that
has major problems if we're in a threaded application. setlocale()
itself is not required by POSIX to be thread-safe (and indeed is not,
on recent OpenBSD). Moreover, its effects are process-wide, so that
we could cause unexpected results in other threads, or another thread
could change our setting.
On platforms having uselocale(), which is required by POSIX:2008,
we can avoid these problems by using uselocale() instead. Windows
goes its own way as usual, but we can make it safe by using
_configthreadlocale(). Platforms having neither continue to use the
old code, but that should be pretty much nobody among current systems.
(Subsequent buildfarm results show that recent NetBSD versions still
lack uselocale(), but it's not a big problem because they also do not
support non-"C" settings for LC_NUMERIC.)
Back-patch of commits 8eb4a9312 and ee27584c4.
Michael Meskes and Tom Lane; thanks also to Takayuki Tsunakawa.
Discussion: https://postgr.es/m/31420.1547783697@sss.pgh.pa.us
In commit ecfd55795, I removed sqlda.c's checks for ndigits != 0 on the
grounds that we should duplicate the state of the numeric value's digit
buffer even when all the digits are zeroes. However, that still isn't
quite right, because another possible state of the digit buffer is
buf == digits == NULL (this occurs for a NaN). As the code now stands,
it'll invoke memcpy with a NULL source address and zero bytecount,
which we know a few platforms crash on. Hence, reinstate the no-copy
short-circuit, but make it test specifically for buf != NULL rather than
some other condition. In hindsight, the ndigits test (added by commit
f2ae9f9c3) was almost certainly meant to fix the NaN case not the
all-zeroes case as the associated thread alleged.
As before, back-patch to all supported versions.
Discussion: https://postgr.es/m/1803D792815FC24D871C00D17AE95905C71161@g01jpexmbkw24
Numeric values with leading zeroes were incorrectly copied into a
SQLDA (SQL Descriptor Area), leading to wrong results in ECPG programs.
Report and patch by Daisuke Higuchi. Back-patch to all supported
versions.
Discussion: https://postgr.es/m/1803D792815FC24D871C00D17AE95905C71161@g01jpexmbkw24
PQnotifies() is defined to just process already-read data, not try to read
any more from the socket. (This is a debatable decision, perhaps, but I'm
hesitant to change longstanding library behavior.) The documentation has
long recommended calling PQconsumeInput() before PQnotifies() to ensure
that any already-arrived message would get absorbed and processed.
However, psql did not get that memo, which explains why it's not very
reliable about reporting notifications promptly.
Also, most (not quite all) callers called PQconsumeInput() just once before
a PQnotifies() loop. Taking this recommendation seriously implies that we
should do PQconsumeInput() before each call. This is more important now
that we have "payload" strings in notification messages than it was before;
that increases the probability of having more than one packet's worth
of notify messages. Hence, adjust code as well as documentation examples
to do it like that.
Back-patch to 9.5 to match related server fixes. In principle we could
probably go back further with these changes, but given lack of field
complaints I doubt it's worthwhile.
Discussion: https://postgr.es/m/CAOYf6ec-TmRYjKBXLLaGaB-jrd=mjG1Hzn1a1wufUAR39PQYhw@mail.gmail.com
When we removed the ecpg-specific versions, we also removed the
"(PostgreSQL)" from the --version output, which we show in other
programs.
Reported-by: Ioseph Kim <pgsql-kr@postgresql.kr>
Commits c6b3c939b (which fixed the precedence of >=, <=, <> operators)
and 865f14a2d (which added support for the standard => notation for
named arguments) created a class of lexer tokens which look like
multi-character operators but which have their own token IDs distinct
from Op. However, longest-match rules meant that following any of
these tokens with another operator character, as in (1<>-1), would
cause them to be incorrectly returned as Op.
The error here isn't immediately obvious, because the parser would
usually still find the correct operator via the Op token, but there
were more subtle problems:
1. If immediately followed by a comment or +-, >= <= <> would be given
the old precedence of Op rather than the correct new precedence;
2. If followed by a comment, != would be returned as Op rather than as
NOT_EQUAL, causing it not to be found at all;
3. If followed by a comment or +-, the => token for named arguments
would be lexed as Op, causing the argument to be mis-parsed as a
simple expression, usually causing an error.
Fix by explicitly checking for the operators in the {operator} code
block in addition to all the existing special cases there.
Backpatch to 9.5 where the problem was introduced.
Analysis and patch by me; review by Tom Lane.
Discussion: https://postgr.es/m/87va851ppl.fsf@news-spur.riddles.org.uk
The lexer's handling of operators contained an O(N^3) hazard when
dealing with long strings of + or - characters; it seems hard to
prevent this case from being O(N^2), but the additional N multiplier
was not needed.
Backpatch all the way since this has been there since 7.x, and it
presents at least a mild hazard in that trying to do Bind, PREPARE or
EXPLAIN on a hostile query could take excessive time (without
honouring cancels or timeouts) even if the query was never executed.
Fix a small number of places that were testing the result of snprintf()
but doing so incorrectly. The right test for buffer overrun, per C99,
is "result >= bufsize" not "result > bufsize". Some places were also
checking for failure with "result == -1", but the standard only says
that a negative value is delivered on failure.
(Note that this only makes these places correct if snprintf() delivers
C99-compliant results. But at least now these places are consistent
with all the other places where we assume that.)
Also, make psql_start_test() and isolation_start_test() check for
buffer overrun while constructing their shell commands. There seems
like a higher risk of overrun, with more severe consequences, here
than there is for the individual file paths that are made elsewhere
in the same functions, so this seemed like a worthwhile change.
Also fix guc.c's do_serialize() to initialize errno = 0 before
calling vsnprintf. In principle, this should be unnecessary because
vsnprintf should have set errno if it returns a failure indication ...
but the other two places this coding pattern is cribbed from don't
assume that, so let's be consistent.
These errors are all very old, so back-patch as appropriate. I think
that only the shell command overrun cases are even theoretically
reachable in practice, but there's not much point in erroneous error
checks.
Discussion: https://postgr.es/m/17245.1534289329@sss.pgh.pa.us
A collection of typos I happened to spot while reading code, as well as
grepping for common mistakes.
Backpatch to all supported versions, as applicable, to avoid conflicts
when backporting other commits in the future.
On Windows, it is sometimes important for corresponding malloc() and
free() calls to be made from the same DLL, since some build options can
result in multiple allocators being active at the same time. For that
reason we already provided PQfreemem(). This commit adds a similar
function for freeing string results allocated by the pgtypes library.
Author: Takayuki Tsunakawa
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1F8AD5D6%40G01JPEXMBYT05
Use of strncpy with a length limit based on the source, rather than
the destination, is non-idiomatic and draws warnings from gcc 8.
Replace with memcpy, which does exactly the same thing in these cases,
but with less chance for confusion.
Backpatch to all supported branches.
Discussion: https://postgr.es/m/21789.1529170195@sss.pgh.pa.us
This complies with the perlcritic policy
Subroutines::RequireFinalReturn, which is a severity 4 policy. Since we
only currently check at severity level 5, the policy is raised to that
level until we move to level 4 or lower, so that any new infringements
will be caught.
A small cosmetic piece of tidying of the pgperlcritic script is
included.
Mike Blackwell
Discussion: https://postgr.es/m/CAESHdJpfFm_9wQnQ3koY3c91FoRQsO-fh02za9R3OEMndOn84A@mail.gmail.com
The "l" (ell) width spec means something in the corresponding scanf usage,
but not here. While modern POSIX says that applying "l" to "f" and other
floating format specs is a no-op, SUSv2 says it's undefined. Buildfarm
experience says that some old compilers emit warnings about it, and at
least one old stdio implementation (mingw's "ANSI" option) actually
produces wrong answers and/or crashes.
Discussion: https://postgr.es/m/21670.1526769114@sss.pgh.pa.us
Discussion: https://postgr.es/m/c085e1da-0d64-1c15-242d-c921f32e0d5c@dunslane.net
This will only actually exercise the "long long" code paths on platforms
where "long" is 32 bits --- otherwise, the SQL bigint type maps to
plain "long", and we will test that code path instead. But that's
probably sufficient coverage, and anyway we weren't testing either
code path before.
Dang Minh Huong, tweaked a bit by me
Discussion: https://postgr.es/m/151935568942.1461.14623890240535309745@wrigleys.postgresql.org
Recent gcc can warn about switch-case fall throughs that are not
explicitly labeled as intentional. This seems like a good thing,
so clean up the warnings exposed thereby by labeling all such
cases with comments that gcc will recognize.
In files that already had one or more suitable comments, I generally
matched the existing style of those. Otherwise I went with
/* FALLTHROUGH */, which is one of the spellings approved at the
more-restrictive-than-default level -Wimplicit-fallthrough=4.
(At the default level you can also spell it /* FALL ?THRU */,
and it's not picky about case. What you can't do is include
additional text in the same comment, so some existing comments
containing versions of this aren't good enough.)
Testing with gcc 8.0.1 (Fedora 28's current version), I found that
I also had to put explicit "break"s after elog(ERROR) or ereport(ERROR);
apparently, for this purpose gcc doesn't recognize that those don't
return. That seems like possibly a gcc bug, but it's fine because
in most places we did that anyway; so this amounts to a visit from the
style police.
Discussion: https://postgr.es/m/15083.1525207729@sss.pgh.pa.us
Everything of use to frontend code should now appear in the _d.h files,
and making this change frees us from needing to worry about whether the
catalog header files proper are frontend-safe.
Remove src/interfaces/ecpg/ecpglib/pg_type.h entirely, as the previous
commit reduced it to a confusingly-named wrapper around pg_type_d.h.
In passing, make test_rls_hooks.c follow project convention of including
our own files with #include "" not <>.
Discussion: https://postgr.es/m/23690.1523031777@sss.pgh.pa.us
Historically, the initial catalog data to be installed during bootstrap
has been written in DATA() lines in the catalog header files. This had
lots of disadvantages: the format was badly underdocumented, it was
very difficult to edit the data in any mechanized way, and due to the
lack of any abstraction the data was verbose, hard to read/understand,
and easy to get wrong.
Hence, move this data into separate ".dat" files and represent it in a way
that can easily be read and rewritten by Perl scripts. The new format is
essentially "key => value" for each column; while it's a bit repetitive,
explicit labeling of each value makes the data far more readable and less
error-prone. Provide a way to abbreviate entries by omitting field values
that match a specified default value for their column. This allows removal
of a large amount of repetitive boilerplate and also lowers the barrier to
adding new columns.
Also teach genbki.pl how to translate symbolic OID references into
numeric OIDs for more cases than just "regproc"-like pg_proc references.
It can now do that for regprocedure-like references (thus solving the
problem that regproc is ambiguous for overloaded functions), operators,
types, opfamilies, opclasses, and access methods. Use this to turn
nearly all OID cross-references in the initial data into symbolic form.
This represents a very large step forward in readability and error
resistance of the initial catalog data. It should also reduce the
difficulty of renumbering OID assignments in uncommitted patches.
Also, solve the longstanding problem that frontend code that would like to
use OID macros and other information from the catalog headers often had
difficulty with backend-only code in the headers. To do this, arrange for
all generated macros, plus such other declarations as we deem fit, to be
placed in "derived" header files that are safe for frontend inclusion.
(Once clients migrate to using these pg_*_d.h headers, it will be possible
to get rid of the pg_*_fn.h headers, which only exist to quarantine code
away from clients. That is left for follow-on patches, however.)
The now-automatically-generated macros include the Anum_xxx and Natts_xxx
constants that we used to have to update by hand when adding or removing
catalog columns.
Replace the former manual method of generating OID macros for pg_type
entries with an automatic method, ensuring that all built-in types have
OID macros. (But note that this patch does not change the way that
OID macros for pg_proc entries are built and used. It's not clear that
making that match the other catalogs would be worth extra code churn.)
Add SGML documentation explaining what the new data format is and how to
work with it.
Despite being a very large change in the catalog headers, there is no
catversion bump here, because postgres.bki and related output files
haven't changed at all.
John Naylor, based on ideas from various people; review and minor
additional coding by me; previous review by Alvaro Herrera
Discussion: https://postgr.es/m/CAJVSVGWO48JbbwXkJz_yBFyGYW-M9YWxnPdxJBUosDC9ou_F0Q@mail.gmail.com
We were being careless in some places about the order of -L switches in
link command lines, such that -L switches referring to external directories
could come before those referring to directories within the build tree.
This made it possible to accidentally link a system-supplied library, for
example /usr/lib/libpq.so, in place of the one built in the build tree.
Hilarity ensued, the more so the older the system-supplied library is.
To fix, break LDFLAGS into two parts, a sub-variable LDFLAGS_INTERNAL
and the main LDFLAGS variable, both of which are "recursively expanded"
so that they can be incrementally adjusted by different makefiles.
Establish a policy that -L switches for directories in the build tree
must always be added to LDFLAGS_INTERNAL, while -L switches for external
directories must always be added to LDFLAGS. This is sufficient to
ensure a safe search order. For simplicity, we typically also put -l
switches for the respective libraries into those same variables.
(Traditional make usage would have us put -l switches into LIBS, but
cleaning that up is a project for another day, as there's no clear
need for it.)
This turns out to also require separating SHLIB_LINK into two variables,
SHLIB_LINK and SHLIB_LINK_INTERNAL, with a similar rule about which
switches go into which variable. And likewise for PG_LIBS.
Although this change might appear to affect external users of pgxs.mk,
I think it doesn't; they shouldn't have any need to touch the _INTERNAL
variables.
In passing, tweak src/common/Makefile so that the value of CPPFLAGS
recorded in pg_config lacks "-DFRONTEND" and the recorded value of
LDFLAGS lacks "-L../../../src/common". Both of those things are
mistakes, apparently introduced during prior code rearrangements,
as old versions of pg_config don't print them. In general we don't
want anything that's specific to the src/common subdirectory to
appear in those outputs.
This is certainly a bug fix, but in view of the lack of field
complaints, I'm unsure whether it's worth the risk of back-patching.
In any case it seems wise to see what the buildfarm makes of it first.
Discussion: https://postgr.es/m/25214.1522604295@sss.pgh.pa.us
For years, our makefiles have correctly observed that "there is no correct
way to write a rule that generates two files". However, what we did is to
provide empty rules that "generate" the secondary output files from the
primary one, and that's not right either. Depending on the details of
the creating process, the primary file might end up timestamped later than
one or more secondary files, causing subsequent make runs to consider the
secondary file(s) out of date. That's harmless in a plain build, since
make will just re-execute the empty rule and nothing happens. But it's
fatal in a VPATH build, since make will expect the secondary file to be
rebuilt in the build directory. This would manifest as "file not found"
failures during VPATH builds from tarballs, if we were ever unlucky enough
to ship a tarball with apparently out-of-date secondary files. (It's not
clear whether that has ever actually happened, but it definitely could.)
To ensure that secondary output files have timestamps >= their primary's,
change our makefile convention to be that we provide a "touch $@" action
not an empty rule. Also, make sure that this rule actually gets invoked
during a distprep run, else the hazard remains.
It's been like this a long time, so back-patch to all supported branches.
In HEAD, I skipped the changes in src/backend/catalog/Makefile, because
those rules are due to get replaced soon in the bootstrap data format
patch, and there seems no need to create a merge issue for that patch.
If for some reason we fail to land that patch in v11, we'll need to
back-fill the changes in that one makefile from v10.
Discussion: https://postgr.es/m/18556.1521668179@sss.pgh.pa.us
In some cases Oracle Pro*C handles char array differently than ECPG. This patch
adds a Oracle compatibility mode to make ECPG behave like Pro*C.
Patch by David Rader <davidr@openscg.com>
Several places used similar code to convert a string to an int, so take
the function that we already had and make it globally available.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
A Value node would store an integer as a long. This causes needless
portability risks, as long can be of varying sizes. Change it to use
int instead. All code using this was already careful to only store
32-bit values anyway.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Rationalize a couple of macro names:
* In catalog/pg_init_privs.h, rename Anum_pg_init_privs_privs to
Anum_pg_init_privs_initprivs to match the column's actual name.
* In ecpg, rename ZPBITOID to BITOID to match catalog/pg_type.h.
This reduces reader confusion, and will allow us to generate these
macros automatically in future.
In catalog/pg_tablespace.h, fix the ordering of related DATA and
#define lines to agree with how it's done elsewhere. This has no
impact today, but simplifies life for the bootstrap data conversion
scripts.
John Naylor
Discussion: https://postgr.es/m/CAJVSVGXnLH=BSo0x-aA818f=MyQqGS5nM-GDCWAMdnvQJTRC1A@mail.gmail.com
