These tests have been removed by 906ea101d0, due to some of them being
unstable in the buildfarm with low max_stack_depth values. They are now
reworked so as they should be more portable.
The tests to cover the findoprnd() overflows use a balanced tree to
avoid using too much stack, per a suggestion and an investigation by Tom
Lane.
Note: This is initially applied only on HEAD; a backpatch will follow
should the buildfarm be fine with the situation.
Discussion: https://postgr.es/m/agZc6XecyE7E7fep@paquier.xyz
Backpatch-through: 14
Previously, tab completion for REPACK parenthesized boolean options
(ANALYZE, CONCURRENTLY, and VERBOSE) did not suggest the boolean values
ON and OFF, unlike VACUUM.
This commit fixes the issue by adding ON/OFF completion for those options.
Author: Baji Shaik <baji.pgdev@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CA+fm-RNZpy7MAceR9gSyy833H_uL-fTx0LxO73RnvwEaprpuRA@mail.gmail.com
When an UPDATE statement triggers check_foreign_key() with the
action set to "cascade", it generates more UPDATE statements to
modify the key values in referencing relations. If a new key value
is NULL, SPI_getvalue() returns a NULL pointer, which is
subsequently passed to quote_literal_cstr(), causing a segfault.
To fix, skip quoting when a new key value is NULL and insert an
unquoted NULL keyword instead.
Oversight in commit 260e97733b. While the refint documentation
recommends marking primary key columns NOT NULL, the aforementioned
scenario accidentally worked on platforms where snprintf()
substitutes "(null)" for NULL pointers. Note that for
character-type columns, the old code quoted "(null)" as a string
literal, so this didn't always produce correct results. But it
still seems better to fix this than to reject cases that previously
worked.
Reported-by: Nikita Kalinin <n.kalinin@postgrespro.ru>
Author: Ayush Tiwari <ayushtiwari.slg01@gmail.com>
Reviewed-by: Pierre Forstmann <pierre.forstmann@gmail.com>
Discussion: https://postgr.es/m/19476-bd04ea6241345303%40postgresql.org
Backpatch-through: 14
Commit 4bea91f21f enabled COPY TO on a partitioned table to read
tuples from its partitions and mapped them to the root table's tuple
descriptor before output. However, it incorrectly built the attribute
map from the root table to the partition.
This commit fixes by building the attribute map from the partition to
the root table, ensuring that partition attributes are correctly
mapped to their corresponding root attributes.
Author: Chao Li <lic@highgo.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/85EA70F3-C3DB-477B-B856-EA569FDAAE7C@gmail.com
Commit b7b0f3f272 ("Use streaming I/O in sequential scans") routed
sequential scans through read_stream_next_buffer(), bypassing the
RELATION_IS_OTHER_TEMP() check in ReadBufferExtended(). As a result,
a superuser can attempt to read or modify temp tables of other
sessions through the read-stream path. When the query plan uses no index,
SELECT/UPDATE/DELETE/MERGE silently see no rows / report zero affected rows,
and COPY produces an empty output -- because the buffer manager has no
visibility into the owning session's local buffers and silently returns
nothing. Any query plan that uses, for instance, a btree index
still errors out via the existing check in ReadBufferExtended(), which
is reached from hio.c and nbtree respectively, but this is incidental.
Fix by enforcing RELATION_IS_OTHER_TEMP() at the three additional
buffer-manager entry points:
- read_stream_begin_impl() rejects the read at stream setup time,
covering sequential and bitmap scans that go through the
read-stream path.
- ReadBuffer_common() becomes the canonical place for the check,
consolidating the existing one previously kept in
ReadBufferExtended(). All ReadBufferExtended() callers go through
ReadBuffer_common(), so the consolidation is behavior-preserving.
- StartReadBuffersImpl() catches direct callers of StartReadBuffers()
that bypass both of the above. This is currently defense-in-depth,
but documents the contract for future code.
The companion test in src/test/modules/test_misc was added in the
preceding commit; this commit updates the assertions for SELECT,
UPDATE, DELETE, MERGE, and COPY (which previously documented the
bug as silent success) to expect the new error.
Author: Jim Jones <jim.jones@uni-muenster.de>
Author: Daniil Davydov <3danissimo@gmail.com>
Co-authored-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Soumya S Murali <soumyamurali.work@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAJDiXghdFcZ8%3Dnh4G69te7iRr3Q0uFyXxb3ZdG09_GTNZXwH0g%40mail.gmail.com
Backpatch-through: 17
Add a TAP test in src/test/modules/test_misc that documents what
happens when one session attempts to read or modify another session's
temporary table. This commit only adds tests; it does not change
backend behavior, so the assertions reflect current behavior:
- SELECT, UPDATE, DELETE, MERGE, COPY on a table without an index
silently succeed with no error and zero rows / zero affected rows.
These commands run through the read-stream path, which currently
bypasses the RELATION_IS_OTHER_TEMP() check. This is the
underlying bug to be fixed in a follow-up.
- INSERT errors with "cannot access temporary tables of other
sessions" because hio.c calls ReadBufferExtended() to find a page
with free space and is caught by the existing check there.
- Index scan errors via the same existing check, reached through
nbtree -> ReadBuffer -> ReadBufferExtended.
- TRUNCATE / ALTER TABLE / ALTER INDEX / CLUSTER fail with their
command-specific error messages.
- VACUUM is silently skipped to avoid noise during database-wide
VACUUM (vacuum_rel() returns without warning).
- DROP TABLE is intentionally allowed: DROP does not touch the
table's contents, and autovacuum relies on this to clean up
temp relations orphaned by a crashed backend.
- ALTER FUNCTION / DROP FUNCTION on an owner-created function over
its own temp row type work as catalog operations -- they don't
read the underlying data.
- CREATE FUNCTION from a separate session, using another session's
temp row type as an argument, is allowed but emits a NOTICE: the
function is moved into the creator's pg_temp namespace with an
auto-dependency on the borrowed type, so it disappears together
with the session that created it.
- A bare DROP TABLE on a temp table that has a cross-session
dependent function fails with a catalog-level dependency error.
- LOCK TABLE in ACCESS SHARE mode on another session's temp table
succeeds and properly blocks the owner's session-exit cleanup
(which acquires AccessExclusiveLock via findDependentObjects).
This exercises the same LockRelationOid path used by autovacuum
when cleaning up orphaned temp relations.
- When the owner session ends, the normal session-exit cleanup
cascades through DEPENDENCY_NORMAL and removes both the temp
objects and any cross-session functions that depended on them.
Also, document the contract for RELATION_IS_OTHER_TEMP() so that
future buffer-access entry points enforce the same rule.
Backpatch this through PostgreSQL 17, where b7b0f3f272 introduces a code
path bypassing this check.
Author: Jim Jones <jim.jones@uni-muenster.de>
Author: Daniil Davydov <3danissimo@gmail.com>
Co-authored-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Soumya S Murali <soumyamurali.work@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAJDiXghdFcZ8%3Dnh4G69te7iRr3Q0uFyXxb3ZdG09_GTNZXwH0g%40mail.gmail.com
Backpatch-through: 17
build_remattrmap() deparses a list of remote column names for a query
that retrieves attribute stats for them from the remote server.
Previously, it did so by using the array-literal syntax with each column
name individually quoted by quote_identifier(), causing the query to
fail on the remote server with a syntax error or no results when that
column name included a single quote or backslash, as quote_identifier()
doesn't escape those characters, making the query invalid or incorrect.
Fix by switching from the array-literal syntax to the ARRAY constructor
syntax with each column name individually quoted by
deparseStringLiteral().
Oversight in commit 28972b6fc.
Reported-by: Satya Narlapuram <satyanarlapuram@gmail.com>
Reported-by: Ayush Tiwari <ayushtiwari.slg01@gmail.com>
Author: Ayush Tiwari <ayushtiwari.slg01@gmail.com>
Reviewed-by: Alex Guo <guo.alex.hengchen@gmail.com>
Reviewed-by: Zhenwei Shang <a934172442@gmail.com>
Reviewed-by: Etsuro Fujita <etsuro.fujita@gmail.com>
Discussion: https://postgr.es/m/CAHg%2BQDc9%3DWtYi%3DJW6QUL6ASOJc6PcGPTuxoMkhnkQ7oi7j5atg%40mail.gmail.com
Discussion: https://postgr.es/m/CAJTYsWWGhVDFjr%2BsmdYdU-Q_TT9YMzXA4QcLCr7rizDOyrEEow%40mail.gmail.com
The jsonpath .split_part() method passed its field-position argument
through numeric_int4(), that can fail hard if called directly.
This commit switches the code to use numeric_int4_safe() with an error
context for soft reporting, so as the overflow and zero field-position
cases can be handled in silent mode.
Oversight in bd4f879a9c.
Author: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/FCF996D0-580B-431C-8DE1-A540C58E444C@gmail.com
When pgbench runs with multiple threads and verbose error reporting is
enabled (--verbose-errors), multiple clients can build verbose error
messages concurrently. Previously, a function-local static
PQExpBuffer was used for these messages, causing the buffer to be
shared across threads. This was not thread-safe and could result in
corrupted or incorrect log output.
Fix this by using a local PQExpBufferData instead of a static buffer.
This keeps verbose error messages correct during concurrent execution.
Backpatch to v15, where this issue was introduced.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Alex Guo <guo.alex.hengchen@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/CAHGQGwER1AjGXpkKB9t9820NBhMQ_Ghv7=HsKeodUr3=SZsF4g@mail.gmail.com
Backpatch-through: 15
Use consistent "REPACK (CONCURRENTLY)" naming in errhint messages,
matching the actual command syntax and the errmsg text used elsewhere
in the same file. Also improve the ereport() after XLogReadRecord
failure to be like others in the tree.
While at it, remove direct mentions of the DDL in the translatable
strings, both in the same errhint() calls as well as some errmsg()
calls. Add periods where missing.
There are all oversights in 28d534e2ae.
Reported-by: Baji Shaik <baji.pgdev@gmail.com>
Discussion: https://postgr.es/m/CA+fm-RPxX1xTcYY4qQGPRDXB2-Fy2SDNdZi=zVjr0j=MPg2PaA@mail.gmail.com
"egrep" has never been in POSIX; the standard way to access this
functionality is "grep -E". Recent versions of GNU grep have
started to warn about this, so stop using "egrep".
This could be back-patched, but I see little need to do so
because the affected places are not code that runs during
normal builds. (Perhaps src/backend/port/aix/mkldexport.sh
is an exception, but let's wait to see if any AIX users
complain before touching that.)
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/473272.1778685870@sss.pgh.pa.us
Run renumber_oids.pl to move high-numbered OIDs down, as per pre-beta
tasks specified by RELEASE_CHANGES. For reference, the command was
./renumber_oids.pl --first-mapped-oid 8000 --target-oid 6400
(but there were already some used OIDs at 6400, so the first one
actually assigned was 6434).
Update typedefs.list from the buildfarm, and run pgindent.
The changes from the new typedefs list are pretty minimal,
since we'd been pretty good (not perfect) about updating
typedefs.list by hand. But the pgindent behavior changes
installed by a3e6beba6, b518ba4af, and 60f9467c3 add up
to make this a relatively sizable diff.
Enforce this standard formatting of multiline comments that start
in column 1:
/*
* line 1
* line 2
*/
Unlike indented comments, we don't reconsider line breaks, except
for forcing the initial /* and trailing */ onto their own lines.
We do make each line start with " *", with some whitespace following.
We preserve pgindent's existing behavior of not touching comments
that begin with /**... or /*-... Also, if the first line looks like
/* === or /* ---, we don't split that line; similarly for the last
line.
The vast majority of multiline comments in our tree already look
like this, but this change will clean up some stragglers.
Author: Aleksander Alekseev <aleksander@tigerdata.com>
Reported-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Arseniy Mukhin <arseniy.mukhin.dev@gmail.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAJ7c6TPQ0kkHQG-AqeAJ3PV_YtmDzcc7s%2B_V4%3Dt%2BxgSnZm1cFw%40mail.gmail.com
Discussion: https://postgr.es/m/EB0141C5-ACC2-4F0B-85EA-0E3AFBCE322F@umbc.edu
Formatting of variadic functions and struct literals with named fields
used to be ugly due to pg_bsd_indent treating period as always being a
binary operator. After a comma, it's not that, so insert a space.
Bump pg_bsd_indent's version so that people who use out-of-tree
copies will know they need to update. (This also covers the other
pg_bsd_indent behavioral change introduced in a3e6beba6.)
Author: Andreas Karlsson <andreas@proxel.se>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/c3327be8-09e2-46a1-88b4-228a339d6916@proxel.se
When a struct member name matches a registered typedef, pgindent
removes the space after "!=" (and some other operators), like so:
entry->dsh.dsa_handle !=DSA_HANDLE_INVALID
The problem is that the related code in lexi.c sets last_u_d to
true before jumping to found_typename, causing the next operator to
be classified as unary and suppressing the following space. This
is correct for type names, but not for struct members. For
example, "Datum *x" needs "*" to be unary to suppress the space
before "x". To fix, only set last_u_d before jumping to
found_typename if the typedef name doesn't appear after "." or
"->".
Note that this does not bump INDENT_VERSION. We'll do that just
once after some other changes to pg_bsd_indent are committed.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/aS9hkwnkWf3dZIA_%40nathan
Both UPDATE and DELETE were failing to test that the application-time
column was updatable. The column is not part of
perminfo->updatedCols, because it should not be checked for
permissions. And it needs to be checked in the DELETE case as well,
since we might insert leftovers with a value for that column.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Co-authored-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/CACJufxFRqg8%3DgbZ-Q6ZS_UQ%2BYdwfZpk%2B9rf7jgWrk8m4RMUm%3DA%40mail.gmail.com
As mentioned in 8268e41aca, pgss_ProcessUtility() may free the
PlannedStmt after an internal ROLLBACK. This commit sets the
PlannedStmt "pstmt" to NULL once it is no longer safe to rely on it,
making bugs similar to the one fixed by the previous commit easier to
detect.
Suggested-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/0A9A8DAC-BC3C-4C7A-9504-2C6050405544@anarazel.de
Two cases fixed by 2b5ba2a0a1 were not covered, to emulate the
handling of corrupted data, for:
- set control bit with a valid 2-byte match tag where offset is 0.
- set control bit with a valid 2-byte match tag where offset exceeds
output written.
Oversight in 67d318e704.
Reviewed-by: Ayush Tiwari <ayushtiwari.slg01@gmail.com>
Discussion: https://postgr.es/m/agF4xkIdRcrCIprs@paquier.xyz
Backpatch-through: 14
Previously, pg_stat_progress_copy in the subscriber could continue to show
the initial COPY operation for logical replication table synchronization as
active even after the data copy had finished. The stale progress entry
remained visible until synchronization caught up with the publisher.
This happened because the table synchronization code called BeginCopyFrom()
and CopyFrom(), but failed to call EndCopyFrom() afterward.
This commit fixes the issue by adding the missing EndCopyFrom() call so that
the COPY progress state in the subscriber is cleared as soon as the initial
data copy completes.
Backpatch to all supported branches.
Author: Shinya Kato <shinya11.kato@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: ChangAo Chen <cca5507@qq.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/CAOzEurQKuy3RiPkd=25PEwEzaqHuGvEOf=X7vaVzhgNjaukYzA@mail.gmail.com
Backpatch-through: 14
Oleg's original comment was intelligible only to him.
Aleksander has reverse-engineered what seems like a plausible
explanation of what the code is trying to do, so replace the
comment with that. (Also, re-order the final expression to
match the new comment.)
In passing, this makes the comment satisfy our usual formatting
conventions. pgindent has let it pass as-is so far, but planned
changes would mess it up without some sort of intervention.
Author: Aleksander Alekseev <aleksander@tigerdata.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAJ7c6TO0xvunpeOv89i1eKQBhKF9=GEETkTz+yAGs1xGYH25MQ@mail.gmail.com
pgss_ProcessUtility() included a reference to a portion of a PlannedStmt
after the point where this data's structure could have been freed,
causing an incorrect memory access. There was a comment documenting
this requirement, missed in 3357471cf9.
This commit includes a test able to make valgrind complain with a
PlannedStmt freed by an internal ROLLBACK query. Similarly to what is
mentioned in 495e73c207, this can be triggered by using the extended
query protocol, something that can be now tested thanks to the recent
meta-command additions in psql. This commit mentions potential other
cases, but as far as I can see the extended protocol case with an
internal ROLLBACK is the only problematic pattern reachable in practice.
Issue introduced by 3357471cf9, gone unnoticed due to a lack of test
coverage. The fix is authored by Chao, my contribution being the new
test.
Author: Chao Li <li.evan.chao@gmail.com>
Co-authored-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/2F91906A-F2B5-4A6B-9695-D136957D4545@gmail.com
REPACK replay builds scan keys for the replica identity index, but it
hard-coded BTEqualStrategyNumber when looking up the equality operator.
That is not correct for non-btree identity indexes, such as the GiST
indexes created for WITHOUT OVERLAPS primary keys. In addition,
find_target_tuple() accepted the first tuple returned by the identity
index scan, which is unsafe for lossy index scans because the index AM may
return false positives with xs_recheck set.
Fix this by using IndexAmTranslateCompareType() to translate COMPARE_EQ
to the equality strategy number for the index AM, and by continuing the
scan when recheck is required until a candidate tuple matches the locator
tuple on all replica identity key columns.
The recheck uses the same equality operator functions as the identity
index scan keys, preserving ScanKey argument ordering.
Author: Chao Li <lic@highgo.com>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/7B0EC0EC-5461-41EF-9B31-F9BBE608DEA5@gmail.com
These checks are failing in the buildfarm, reporting stack overflows
rather than the expected errors, though seemingly only on ppc64 and
s390x platforms. Perhaps there is something off about our tests
for stack depth on those architectures? But there's no time to
debug that right now, and surely these tests aren't too essential.
Revert for now and plan to revisit after the release dust settles.
Backpatch-through: 14
Security: CVE-2026-6473
Maliciously crafted key value updates could achieve SQL injection
within check_foreign_key(). To fix, ensure new key values are
properly quoted and escaped in the internally generated SQL
statements. While at it, avoid potential buffer overruns by
replacing the stack buffers for internally generated SQL statements
with StringInfo.
Reported-by: Nikolay Samokhvalov <nik@postgres.ai>
Author: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Security: CVE-2026-6637
Backpatch-through: 14
When result_is_int is set to 0, PQfn() cannot validate that the
result fits in result_buf, so it will write data beyond the end of
the buffer when the server returns more data than requested. Since
this function is insecurable and obsolete, add a warning to the top
of the pertinent documentation advising against its use.
The only in-tree caller of PQfn() is the frontend large object
interface. To fix that, add a buf_size parameter to
pqFunctionCall3() that is used to protect against overruns, and use
it in a private version of PQfn() that also accepts a buf_size
parameter.
Reported-by: Yu Kunpeng <yu443940816@live.com>
Reported-by: Martin Heistermann <martin.heistermann@unibe.ch>
Author: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Etsuro Fujita <etsuro.fujita@gmail.com>
Security: CVE-2026-6477
Backpatch-through: 14
If you accumulate many arrays full of NULLs, you could overflow
'nitems', before reaching the MaxAllocSize limit on the allocations.
Add an explicit check that the number of items doesn't grow too large.
With more than MaxArraySize items, getting the final result with
makeArrayResultArr() would fail anyway, so better to error out early.
Reported-by: Xint Code
Author: Heikki Linnakangas <heikki.linnakangas@iki.fi>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Backpatch-through: 14
Security: CVE-2026-6473
pg_locale_icu.c was full of places where a very long input string
could cause integer overflow while calculating a buffer size,
leading to buffer overruns.
It also was cavalier about using char-type local arrays as buffers
holding arrays of UChar. The alignment of a char[] variable isn't
guaranteed, so that this risked failure on alignment-picky platforms.
The lack of complaints suggests that such platforms are very rare
nowadays; but it's likely that we are paying a performance price on
rather more platforms. Declare those arrays as UChar[] instead,
keeping their physical size the same.
pg_locale_libc.c's strncoll_libc_win32_utf8() also had the
disease of assuming it could double or quadruple the input
string length without concern for overflow.
Reported-by: Xint Code
Reported-by: Pavel Kohout <pavel.kohout@aisle.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Backpatch-through: 14
Security: CVE-2026-6473
pg_rewind and pg_basebackup could be fed paths from rogue endpoints that
could overwrite the contents of the client when received, achieving path
traversal.
There were two areas in the tree that were sensitive to this problem:
- pg_basebackup, through the astreamer code, where no validation was
performed before building an output path when streaming tar data. This
is an issue in v15 and newer versions.
- pg_rewind file operations for paths received through libpq, for all
the stable branches supported.
In order to address this problem, this commit adds a helper function in
path.c, that reuses path_is_relative_and_below_cwd() after applying
canonicalize_path(). This can be used to validate the paths received
from a connection point. A path is considered invalid if any of the two
following conditions is satisfied:
- The path is absolute.
- The path includes a direct parent-directory reference.
Reported-by: XlabAI Team of Tencent Xuanwu Lab
Reported-by: Valery Gubanov <valerygubanov95@gmail.com>
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 14
Security: CVE-2026-6475
A few functions in this file were incautious about multiplying a
possibly large integer by a factor more than 1 and then using it as
an allocation size. This is harmless on 64-bit systems where we'd
compute a size exceeding MaxAllocSize and then fail, but on 32-bit
systems we could overflow size_t, leading to an undersized
allocation and buffer overrun. To fix, use palloc_array() or
mul_size() instead of handwritten multiplication.
Reported-by: Sven Klemm <sven@tigerdata.com>
Reported-by: Xint Code
Author: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Tatsuo Ishii <ishii@postgresql.org>
Security: CVE-2026-6473
Backpatch-through: 14
This omission allowed roles to create multirange types in any
schema, potentially leading to privilege escalations. Note that
when a multirange type name is not specified in CREATE TYPE, it is
automatically placed in the range type's schema, which is checked
at the beginning of DefineRange().
Reported-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Security: CVE-2026-6472
Backpatch-through: 14
drop_existing_subscription() neglected to escape the subscription
name when generating its query string. To fix, use
PQescapeIdentifier() to construct a properly escaped name, and use
it in the ALTER SUBSCRIPTION and DROP SUBSCRIPTION commands.
Reported-by: Yu Kunpeng <yu443940816@live.com>
Author: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Security: CVE-2026-6476
Backpatch-through: 17
The SQL functions for the restore of attribute and expression statistics
accept "most_common_vals" and "most_common_freqs" as independent arrays.
The planner assumes these have the same number of elements, but it was
possible to insert in the catalogs data that would cause an over-read
when the catalog data is loaded in the planner.
There were two holes in the stats restore logic:
- Both arrays should match in size.
- The input array must be one-dimensional, and it should match with what
is delivered by pg_dump when scanning the pg_stats catalogs.
The multivariate extended statistics MCV path (import_mcv) already
validated these inputs via check_mcvlist_array(), and is not affected.
These problems exist in v18 and newer versions for the restore of
attribute statistics. These problems affect only HEAD for the restore
of the expression statistics.
Reported-by: Jeroen Gui <jeroen.gui1@proton.me>
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: John Naylor <johncnaylorls@gmail.com>
Security: CVE-2026-6575
Backpatch-through: 18
Although pg_strftime() has defined error conditions, no callers bother
to check for errors. This is problematic because the output string is
very likely not null-terminated if an error occurs, so that blindly
using it is unsafe. Rather than trusting that we can find and fix all
the callers, let's alter the function's API spec slightly: make it
guarantee a null-terminated result so long as maxsize > 0.
Furthermore, if we do get an error, let's make that null-terminated
result be an empty string. We could instead truncate at the buffer
length, but that risks producing mis-encoded output if the tz_name
string contains multibyte characters. It doesn't seem reasonable for
src/timezone/ to make use of our encoding-aware truncation logic.
Also, the only really likely source of a failure is a user-supplied
timezone name that is intentionally trying to overrun our buffers.
I don't feel a need to be particularly friendly about that case.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: John Naylor <johncnaylorls@gmail.com>
Backpatch-through: 14
Security: CVE-2026-6474
timeofday() assumed that the output of pg_strftime() could not contain
% signs, other than the one it explicitly asks for with %%. However,
we don't have that guarantee with respect to the time zone name (%Z).
A crafted time zone setting could abuse the subsequent snprintf()
call, resulting in crashes or disclosure of server memory.
To fix, split the pg_strftime() call into two and then treat the
outputs as literal strings, not a snprintf format string. The
extra pg_strftime() call doesn't really cost anything, since the
bulk of the conversion work was done by pg_localtime().
Also, adjust buffer widths so that we're not risking string truncation
during the snprintf() step, as that would create a hazard of producing
mis-encoded output.
This also fixes a latent portability issue: the format string expects
an int, but tp.tv_usec is long int on many platforms.
Reported-by: Xint Code
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: John Naylor <johncnaylorls@gmail.com>
Backpatch-through: 14
Security: CVE-2026-6474
ALTER SUBSCRIPTION ... REFRESH PUBLICATION interpolates schema and
relation names into SQL without quoting them. A crafted subscriber
relation name can inject arbitrary SQL on the publisher. Test such a
name. Back-patch to v16, where commit
8756930190 first appeared.
Reported-by: Pavel Kohout <pavel.kohout@aisle.com>
Author: Pavel Kohout <pavel.kohout@aisle.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Backpatch-through: 16
Security: CVE-2026-6638
This commit applies timingsafe_bcmp() to authentication paths that
handle attributes or data previously compared with memcpy() or strcmp(),
which are sensitive to timing attacks.
The following data is concerned by this change, some being in the
backend and some in the frontend:
- For a SCRAM or MD5 password, the computed key or the MD5 hash compared
with a password during a plain authentication.
- For a SCRAM exchange, the stored key, the client's final nonce and the
server nonce.
- RADIUS (up to v18), the encrypted password.
- For MD5 authentication, the MD5(MD5()) hash.
Reported-by: Joe Conway <mail@joeconway.com>
Security: CVE-2026-6478
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: John Naylor <johncnaylorls@gmail.com>
Backpatch-through: 14
