The size of the reply can be different from the size of the command in
case a debug firmware asserts. fw_asrt() needs the entire reply in
order to decode the location of the assert.
Sponsored by: Chelsio Communications
transmissions if possible.
2. For SIOCSIFFLAGS call bxe_init_locked() only if !BXE_STATE_DISABLED
3. remove code not needed in bxe_init_internal_common()
Submitted by:vaishali.kulkarni@qlogic.com;venkata.bhavaraju@qlogic.com
Approved by:davidcs@freebsd.org
MFC after:5 days
In case the firmware falls through to executing startup.sh, populate it
with the name of our boot loader. In normal operation this should not be
necessary but may allow the system to boot if it would otherwise just
remain at a shell prompt.
Reviewed by: andrew, imp, smh
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5878
the NFS server would leave the newly created vnode locked. This could
result in a file system that would not unmount and processes wedged,
waiting for the file to be unlocked.
Since this VOP_SETATTR() never fails for most file systems, this bug
doesn't normally manifest itself. I found it during testing of an
exported GlusterFS file system, which can fail.
This patch adds the vput() and changes the error to the correct NFS one.
MFC after: 2 weeks
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c
Don't drop the g_topology_lock before freeing old_physpath. That
opens up a race where one thread can call vdev_geom_attrchanged,
set old_physpath, drop the g_topology_lock, then block trying to
acquire the SCL_STATE lock. Then another thread can come into
vdev_geom_attrchanged, set old_physpath to the same value, and
proceed to free it. When the first thread resumes, it will free
the same location.
It turns out that the SCL_STATE lock isn't needed. It was
originally added by gibbs to protect vd->vdev_physpath while
updating the same. However, the update process subsequently was
switched to an atomic operation (a pointer swap). Now, there is
no need for the SCL_STATE lock, and hence no need to drop the
g_topology_lock.
Reviewed by: delphij
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D5413
Previously we had to do it synchronously because we could not drop the lock
due to potential scratch memory use conflicts. Previous commits fixed that
collision, so here it goes -- slower and less reliable external requests
are executed asynchronously without spinning in tight loop and with more
safe timeout handling.
There are some other potential problems related to overflowing racct
counters; I'll revisit those later.
Submitted by: Pieter de Goeje (earlier version)
Reviewed by: emaste@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
This fixes a conflict with the M_B macro in powerpc's
<machine/db_machdep.h> exposed by the recent addition of DDB commands
to the cxgbe driver.
Discussed with: np
Reported by: bz
Sponsored by: Chelsio Communications
Usually IOCBs should be put on queue for asynchronous processing and should
not require additional DMA memory. But there are some cases like aborts and
resets that for external reasons has to be synchronous. Give those cases
separate 2*64 byte DMA area to decouple them from other DMA scratch area
users, using it for asynchronous requests.
Some BIOSes disable AMD Topology extension on AMD Family 15h notebook
processors. We re-enable the extension, so that we can properly discover
core and cache topology. Linux seems to do the same.
Reported by: Johannes Dieterich <dieterich.joh@gmail.com>
Reviewed by: jhb, kib
Tested by: Johannes Dieterich <dieterich.joh@gmail.com>
(earlier version)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D5883
is required to check the verification tag. However, this
requires the verification tag to be not 0. Enforce this.
For packets with a verification tag of 0, we need to
check it it contains an INIT chunk and use the initiate
tag for the validation. This will be a separate commit,
since it touches also other code.
MFC after: 1 week
Previously uncompressed buffers did not obey that rule.
Type of b_asize is changed to uint64_t for consistency,
given that this is a zeta-byte filesystem.
l2arc_compress_buf is renamed to l2arc_transform_buf to better reflect
its new utility. Now not only we ensure that a compressed buffer has
a size aligned to ashift, but we also allocate a properly sized
temporary buffer if the original buffer is not compressed and it has
an odd size. This ensures that all I/O to the cache device is always
ashift-aligned, in terms of both a request offset and a request size.
If the aligned data is larger than the original data, then we have to use
a temporary buffer when reading it as well.
Also, enhance physical zio alignment checks using vdev_logical_ashift.
On FreeBSD we have this information, so we can make stricter assertions.
Reviewed by: smh, mav
MFC after: 1 month
Sponsored by: ClusterHQ
Differential Revision: https://reviews.freebsd.org/D2789
DTrace-related exceptions in userland code are handled elsewhere.
One practical problem was a crash in dtrace_invop_start() when saved
%rsp pointed to a virtual address that was not backed.
i386 code already ignored userland exceptions.
Reviewed by: markj, kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D5906
Because the file is generated with -f using another Makefile, 2
different Makefiles are trying to handle the .meta file for the
target. The obvious .NOMETA_CMP or .NOMETA on the ${MAKE} targets
don't work as they are very limited in scope in bmake. Using
.PHONY fixes the problem and ensures that the ${MAKE} command
is always ran to check if it is outdated in the sub-make.
An example of the problem in gnu/lib/libgcc (with make -dM):
/usr/obj/root/git/freebsd/gnu/lib/libgcc/tm.h.meta: 2: a build command has changed
TARGET_CPU_DEFAULT="" HEADERS="options.h i386/biarch64.h i386/i386.h i386/unix.h i386/att.h dbxelf.h elfos-undef.h elfos.h freebsd-native.h freebsd-spec.h freebsd.h i386/x86-64.h i386/freebsd.h i386/freebsd64.h defaults.h" DEFINES="" /bin/sh /root/git/freebsd/gnu/lib/libgcc/../../../contrib/gcc/mkconfig.sh tm.h
vs
(cd /root/git/freebsd/gnu/lib/libgcc; make -f /root/git/freebsd/gnu/lib/libgcc/../../usr.bin/cc/cc_tools/Makefile MFILE=/root/git/freebsd/gnu/lib/libgcc/../../usr.bin/cc/cc_tools/Makefile GCCDIR=/root/git/freebsd/gnu/lib/libgcc/../../../contrib/gcc tm.h)
Skipping meta for tm.h: .NOMETA
(cd /root/git/freebsd/gnu/lib/libgcc; make -f /root/git/freebsd/gnu/lib/libgcc/../../usr.bin/cc/cc_tools/Makefile MFILE=/root/git/freebsd/gnu/lib/libgcc/../../usr.bin/cc/cc_tools/Makefile GCCDIR=/root/git/freebsd/gnu/lib/libgcc/../../../contrib/gcc tm.h)
`tm.h' is up to date.
Sponsored by: EMC / Isilon Storage Division
In case where the two events were being received in separate reads, the
event buffer was being null-terminated at the wrong offset.
Also, factored out some common code between the tests, and fixed a comment.
Submitted by: will
MFC after: 3 days
Sponsored by: Spectra Logic Corp
the old and new NFS clients. He did a good job of isolating the problem
which was caused by the new NFS client not setting the post write mtime
correctly. The new NFS client code was cloned from the old client, but
was incorrect, because the mtime in the nfs vnode's cache wasn't yet
updated. This patch fixes this problem. The patch also adds missing mutex
locking.
Reported and tested by: bde
MFC after: 2 weeks
The previous method would completely nerf CFLAGS once bsd.progs.mk had
recursed into the per-PROG logic and make the CFLAGS for tap testcases
to -O0, instead of appending to CFLAGS for all of the tap testcases.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Author: Alexander Motin <mav@FreeBSD.org>
Improve speculative prefetch of indirect blocks.
Scalability of many operations on wide ZFS pool can be limited by
requirement to prefetch indirect blocks first. Recently added
asynchronous indirect block read partially helped, but did not
solve the problem completely. This patch extends existing prefetcher
functionality to explicitly work with indirect blocks.
Before this change prefetcher issued reads for up to 8MB of data in
advance. With this change it also issues indirect block reads
for up to 64MB of data in advance, so that when it will be time to
actually read those data, it can be done immediately. Alike effect
can be achieved by just increasing maximal data prefetch distance,
but at higher memory cost.
Also this change introduces indirect block prefetch for rewrite
operations, that was never done before. Previously ARC miss for
Indirect blocks regularly blocked rewrites, converting perfectly
aligned asynchronous operations into synchronous read-write pairs,
significantly reducing maximal rewrite speed.
While being there this issue was also fixed:
- prefetch was done always, even if caching for the dataset was
completely disabled.
Testing on FreeBSD with zvol on top of 6x striped 2x mirrored pool
of 12 assorted HDDs shown me such performance numbers:
------- BEFORE --------
Write 491363677 bytes/sec
Read 312430631 bytes/sec
Rewrite 97680464 bytes/sec
-------- AFTER --------
Write 493524146 bytes/sec
Read 438598079 bytes/sec
Rewrite 277506044 bytes/sec
Closes#65Closes#80openzfs/openzfs@792fd28ac0
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Author: Alexander Motin <mav@FreeBSD.org>
Improve speculative prefetch of indirect blocks.
Scalability of many operations on wide ZFS pool can be limited by
requirement to prefetch indirect blocks first. Recently added
asynchronous indirect block read partially helped, but did not
solve the problem completely. This patch extends existing prefetcher
functionality to explicitly work with indirect blocks.
Before this change prefetcher issued reads for up to 8MB of data in
advance. With this change it also issues indirect block reads
for up to 64MB of data in advance, so that when it will be time to
actually read those data, it can be done immediately. Alike effect
can be achieved by just increasing maximal data prefetch distance,
but at higher memory cost.
Also this change introduces indirect block prefetch for rewrite
operations, that was never done before. Previously ARC miss for
Indirect blocks regularly blocked rewrites, converting perfectly
aligned asynchronous operations into synchronous read-write pairs,
significantly reducing maximal rewrite speed.
While being there this issue was also fixed:
- prefetch was done always, even if caching for the dataset was
completely disabled.
Testing on FreeBSD with zvol on top of 6x striped 2x mirrored pool
of 12 assorted HDDs shown me such performance numbers:
------- BEFORE --------
Write 491363677 bytes/sec
Read 312430631 bytes/sec
Rewrite 97680464 bytes/sec
-------- AFTER --------
Write 493524146 bytes/sec
Read 438598079 bytes/sec
Rewrite 277506044 bytes/sec
Closes#65Closes#80openzfs/openzfs@792fd28ac0
in one command due to wrong file size limit. Do not use bootcode size
to calculate partsize limit.
Also add report message about successful partcode writing.
Reported by: Trond Endrestøl
MFC after: 2 weeks
Only include sysctl in kernel builds fixing warning about implicit
declaration of function 'sysctl_handle_int'.
PR: 204140
MFC after: 1 week
X-MFC-With: r297813
Sponsored by: Multiplay
While the same update is also available for 24xx chips, it seems have
a problem with disabling virtual ports -- firmware handles the request,
but does not respong on it, causing timeout in driver.
MFC after: 1 month
handler notifying about interface departure and one of the consumers will
detach if_bpf.
There is no way for us to re-attach this easily as the DLT and hdrlen are
only given on interface creation.
Add a function to allow us to query the DLT and hdrlen from a current
BPF attachment and after if_attach_internal() manually re-add the if_bpf
attachment using these values.
Found by panics triggered by nd6 packets running past BPF_MTAP() with no
proper if_bpf pointer on the interface.
Also add a basic DDB show function to investigate the if_bpf attachment
of an interface.
Reviewed by: gnn
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5896
At the moment no ZFS buffers are included into a crash dump unless
ZFS_DEBUG (or INVARIANTS) kernel option is enabled. That's not very
helpful for debugging of ZFS problems, because important information
often resides in metadata buffers.
This change switches the dumping behavior when UMA is used from the
illumos behavior to a more useful behavior that we have on FreeBSD
when ZFS buffers are allocated via malloc.
Reviewed by: smh, mav
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D5892
