extended attributes since FreeBSD 5, make the following semantic
changes:
- Don't update the inode modification time (mtime) when extended
attributes (and hence also ACLs) are added, modified, or removed.
- Don't update the inode access tie (atime) when extended attributes
(and hence also ACLs) are queried.
This means that rsync (and related tools) won't improperly think
that the data in the file has changed when only the ACL has changed.
Note that ffs_reallocblks() has not been changed to not update on an
IO_EXT transaction, but currently EAs don't use the cluster write
routines so this shouldn't be a problem. If EAs grow support for
clustering, then VOP_REALLOCBLKS() will need to grow a flag argument
to carry down IO_EXT to UFS.
MFC after: 1 week
PR: ports/125739
Reported by: Alexander Zagrebin <alexz@visp.ru>
Tested by: pluknet <pluknet@gmail.com>,
Greg Byshenk <freebsd@byshenk.net>
Discussed with: kib, kientzle, timur, Alexander Bokovoy <ab@samba.org>
exceeded the maximum size of 1 page for OHCI controllers. Other serial
drivers use the same size, so I assume this should be enough (1MB/s
throughput?).
Make detach() completely synchronous. Properly handle stalled USB
transfers (use internal mechanism instead of submitting own control
transfers). Rename/remove a couple of variables and update comments.
This work was done in close collaboration with HPS.
Reviewed by: HPS
reimplementation of the same. Note that this changes -std=c99
to -std=iso9899:1999 but those two are synonyms.
Approved by: kib (mentor)
Reviewed by: ru
without corresponding number of fifo_open(). This causes assertion
failure in fifo_close() due to vp->v_fifoinfo being NULL for kernel
with INVARIANTS, or NULL pointer dereference otherwise. In fact, we may
ignore excess calls to fifo_close() without bad consequences.
Turn KASSERT() into the return, and print warning for now.
Tested by: pho
Reviewed by: rwatson
MFC after: 2 weeks
the PIC before the interrupt handler was set. If the interrupt triggered in
that window, then the interrupt vector would be disabled.
Reported by: Marco Trillo
Even though the code seems to be FreeBSD kernel code, it isn't compiled
on FreeBSD. I could have known this, because I was a little amazed that
I couldn't find a prototype of pfopen()/pfclose() somewhere else,
because it isn't marked as static.
Apart from that, removing these functions wouldn't have been harmful
anyway, because there are some other strange things about them (the
implementation isn't consistent with the prototype at the top). Still,
it's better to leave it, because it makes merging code back to older
branches a little harder.
Requested by: mlaier
It turns out I was patching functions that weren't used by pf(4) anyway.
They still seem to use `struct proc *' instead of `struct thread *'.
They weren't listed in pf_cdevsw.
Because it is not possible to access the pf(4) character device through
any other device node as the one in devfs, there is no need to check for
unknown device minor numbers.
Approved by: mlaier
an interpreter definition in its program header), set the auxiliary
ELF argument AT_BASE to 0 rather than to the address that we would
have mapped the interpreter at if there had been one.
The ELF ABI specifications appear to be ambiguous as to the desired
behavior in this situation, as they define AT_BASE as the base address
of the interpreter, but do not mention what to do if there is none.
On Solaris, AT_BASE will be set to the base address of the static
binary if there is no interpreter, and on Linux, AT_BASE is set to 0.
We go with the Linux semantics as they are of more immediate utility
and allow the early runtime environment to know that the kernel has
not mapped an interpreter, but because AT_PHDR points at the ELF
header for the running binary, it is still possible to retrieve all
required mapping information when the process starts should it be
required. Either approach would be preferable to our current behavior
of passing a pointer to an unmapped region of user memory as AT_BASE.
MFC after: 3 weeks
backend kegs so it may source compatible memory from multiple backends.
This is useful for cases such as NUMA or different layouts for the same
memory type.
- Provide a new api for adding new backend kegs to secondary zones.
- Provide a new flag for adjusting the layout of zones to stagger
allocations better across cache lines.
Sponsored by: Nokia
sizeof("MAXCPU") being used to calculate a string length rather than
something more reasonable such as sizeof("32"). This shouldn't have
caused any ill effect until we run on machines with 1000000 or more
cpus.
the vap ioctl. This means that the parent interface should hopefully be up
before we return to userland, it does not depend on the parent init succeeding,
just that it was run.
This fixes wpa_supplicant with ndis and USB where the parent interfaces can be
slow to init.
- Restructure selscan() and selrescan() to avoid producing extra selfps
when we have a fd in multiple sets. As described below multiple selfps
may still exist for other reasons.
- Make selrescan() tolerate multiple selfds for a given descriptor
set since sockets use two selinfos per fd. If an event on each selinfo
fires selrescan() will see the descriptor twice. This could result in
select() returning 2x the number of fds actually existing in fd sets.
Reported by: mgleason@ncftp.com
Now that make_dev() doesn't require unit numbers to be unique, there is
no need to use an unrhdr here to generate the numbers. Remove the entire
init-routine, because it is optional.
pointers to the callout handler just before and just after the callout
it invoked. I attempted to do this in a manner congruent to tracing in
Solaris's callout mechanism, but couldn't quite use the same names due
to convention and syntax differences.
Example DTrace script to generate a distribution graph of callout
execution times:
callout_execute:::callout_start
{
self->cstart = timestamp;
}
callout_execute:::callout_end
{
@length = quantize(timestamp - self->cstart);
}
Reviewed by: jb
MFC after: 3 days
inside the SYSCTL() macros and thus does not need to be done for
all of the nodes scattered across the source tree.
- Mark the name-cache related sysctl's (including debug.hashstat.*) MPSAFE.
- Mark vm.loadavg MPSAFE.
- Remove GIANT_REQUIRED from vmtotal() (everything in this routine already
has sufficient locking) and mark vm.vmtotal MPSAFE.
- Mark the vm.stats.(sys|vm).* sysctls MPSAFE.
around calls to vlrureclaim() on non-MPSAFE filesystems. Specifically,
vnlru no longer needs Giant for the common case of waking up and deciding
there is nothing for it to do.
MFC after: 2 weeks
rather than a fixed 512... This fixes the mount root problem on at91.
Prior to the SD card reorg, all data transfers were 512 bytes, so we
didn't notice.
the serial port class when we set the devclass since it is now
no-longer a compile time constant. Eliminate the pci include, as it
isn't relevant or necessary.
time constant. This allows us to potentially change it at runtime or
autodetect it early in the boot (the latter being much more likely to
have a good outcome).
- To avoid having a bunch of locks that end up always getting acquired as
a group, give each ppc(4) device a mutex which it shares with all the
child devices including ppbus(4), lpt(4), plip(4), etc. This mutex
is then used for all the locking.
- Rework the interrupt handling stuff yet again. Now ppbus drivers setup
their interrupt handler during attach and tear it down during detach
like most other drivers. ppbus(4) only invokes the interrupt handler
of the device that currently owns the bus (if any) when an interrupt
occurs, however. Also, interrupt handlers in general now accept their
softc pointers as their argument rather than the device_t. Another
feature of the ppbus interrupt handlers is that they are called with
the parent ppc device's lock already held. This minimizes the number
of lock operations during an interrupt.
- Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE.
- lpbb(4) uses the ppc lock instead of Giant.
- Other plip(4) changes:
- Add a mutex to protect the global tables in plip(4) and free them on
module unload.
- Add a detach routine.
- Split out the init/stop code from the ioctl routine into separate
functions.
- Other lpt(4) changes:
- Use device_printf().
- Use a dedicated callout for the lptout timer.
- Allocate the I/O buffers at attach and detach rather than during
open and close as this simplifies the locking at the cost of
1024+32 bytes when the driver is attached.
- Other ppi(4) changes:
- Use an sx lock to serialize open and close.
- Remove unused HADBUS flag.
- Add a detach routine.
- Use a malloc'd buffer for each read and write to avoid races with
concurrent read/write.
- Other pps(4) changes:
- Use a callout rather than a callout handle with timeout().
- Conform to the new ppbus requirements (regular mutex, non-filter
interrupt handler). pps(4) is probably going to have to become a
standalone driver that doesn't use ppbus(4) to satisfy it's
requirements for low latency as a result.
- Use an sx lock to serialize open and close.
- Other vpo(4) changes:
- Use the parent ppc device's lock to create the CAM sim instead of
Giant.
- Other ppc(4) changes:
- Fix ppc_isa's detach method to detach instead of calling attach.
Tested by: no one :-(
Some time ago I tried adding Unicode rendering to the teken demo
application, but I didn't get it working. It seems I forgot to call
setlocale(). Polish this code and make sure it doesn't get lost.
Also a small fix for my previous commit: all Unicode characters in
teken_boxdrawing are below 0x10000, so store them as 16-bit values.
o Only set 4-bit caps on those boards that have 4-bit caps (this means that
because we don't set wire4 yet, this forces us to always use 1-bit bus).
o Don't test wire4 when setting up the bus width, since bad things will
happen if we do.
# This likely won't fix the busted at91 sd card support, but these are
# needful changes for correctness.
the helper function. It is supposed to be useful for any filesystem
that has to unlock dvp to walk to the ".." entry in lookup routine.
Requested by: jhb
Tested by: pho
MFC after: 1 month
VOP_MARKATIME() since unlike the rest of VOP_SETATTR(), VA_MARKATIME
can be performed while holding a shared vnode lock (the same functionality
is done internally by VOP_READ which can run with a shared vnode lock).
Add missing locking of the vnode interlock to the ufs implementation and
remove a special note and test from the NFS client about not supporting the
feature.
Inspired by: ups
Tested by: pho
section of code, this uses WITNESS_NORELEASE() and WITNESS_RELEASEOK() to mark
the boundaries. Both functions require the lock to be held when calling.
This is intended for scenarios like a bus asserting that the bus lock is not
dropped during a driver call. There doesn't appear to be a man page to
document this in.
Reviewed by: jhb
indirect block pages are not removed by the mentioned invocation of
the vnode_pager_setsize().
Put a common code into the helper function ffs_pages_remove().
Reported and tested by: dchagin
Reviewed by: ups
MFC after: 3 weeks
- Always program RX configuration register from scratch instead of
doing read/modify/write.
- Rename re_setmulti() to re_set_rxmode() to be reflect reality.
- Simplify hash filter logic a little while I am here.
Reviewed by: yongari (early version)
the fsbase value. The switch loads the fs segment register, that
invalidates the value in fsbase msr, thus value in %r9 can not be
considered the current value for fsbase anymore.
Unconditionally reload fsbase when switching to 32bit binary.
PR: 130526
MFC after: 3 weeks
Even though VT100-like devices can display non-ASCII characters, they do
not use an 8-bit character set. Special escape sequences allow the VT100
to switch character maps. The special graphics character set stores the
box drawing characters, starting at 0x60, ending at 0x7e. This means
we now pass the character map tests in vttest, even the save/restore
cursor test, combined with character maps. dialog(1) also works a lot
better now.
This commit also includes some other minor fixes:
- Default to 24 lines in teken_demo when using xterm emulation.
- Make white foreground and background work in teken_demo.
address space where to put vnode pages, and then call UFS_BALLOC(),
to actually allocate new block and map it. When UFS_BALLOC() returns
error, sometimes we forget to revert the vm object size increase,
allowing for the pages that are not backed by the logical disk blocks.
Revert vnode_pager_setsize() back when UFS_BALLOC() failed, for
ffs_truncate() and ffs_write().
PR: 129956
Reviewed by: ups
MFC after: 3 weeks
vnode, from -1 down. When vinvalbuf(vp, V_ALT) is done for the vnode, it
incorrectly does vm_object_page_remove(0, 0), removing all pages from
the underlying vm object, not only the pages that back the extended
attributes data.
Change vinvalbuf() to not remove any pages from the object when
V_NORMAL or V_ALT are specified. Instead, the only in-tree caller
in ffs_inode.c:ffs_truncate() that specifies V_ALT explicitely
removes the corresponding page range. The V_NORMAL caller
does vnode_pager_setsize(vp, 0) immediately after the call to
vinvalbuf(V_NORMAL) already.
Reported by: csjp
Reviewed by: ups
MFC after: 3 weeks
In normal operation, the number of cache entries is roughly equal to the
number of active vnodes. However, when most of the recently accessed
vnodes have many hard links, the number of cache entries can be 32000
times as large, exhausting kernel memory and provoking a panic in
kmem_malloc().
MFC after: 2 weeks
very well maintained and point user to sysutils/fusefs-ntfs, which
at the time of this writing seems to be a better alternative.
Suggested by: luigi
MFC after: 2 weeks
of superblock rather than using hardcoded values. This fixes ext2fs on
filesystems with inode sized other than 128.
Submitted by: Alex Lyashkov <Alexey.Lyashkov@Sun.COM> (based on)
MFC after: 2 weeks
Cons25 doesn't seem to use a straight 1:1 mapping to the ANSI colors,
but uses the same color numbers as at least used by syscons on i386. I
suspect if you change the definitions on a different architecture,
things may break? Not sure.
Add a small array to convert syscons-style color codes to ANSI
equivalents, which are used by libteken internally. I didn't notice this
bug, because I only tested my code with black, white and green, all of
them shared the same numbers.
It turns out I forgot to implement two escape sequences that allows the
user to change the default foreground and background colors. I thought
they were implemented by syscons itself, but vidcontrol just generates
some escape sequences, which get interpreted by the terminal emulator.
Reported by: mgp (forums)
The teken library already supports UTF-8 handling and xterm emulation,
but we have reasons to disable this right now. Because we should make it
easy and interesting for people to experiment with these features, allow
them to be set in kernel configuration files.
Before this commit we had a flag called `TEKEN_CONS25' to enable
cons25-style emulation. I'm calling it the opposite now, `TEKEN_XTERM',
because we want to enable it in kernel configuration files explicitly.
Requested by: kib
with src/tools/sched/schedgraph.py. This allows developers to quickly
create a graphical view of ktr data for any resource in the system.
- Add sched_tdname() and the pcpu field 'name' for quickly and uniformly
identifying records associated with a thread or cpu.
- Reimplement the KTR_SCHED traces using the new generic facility.
Obtained from: attilio
Discussed with: jhb
Sponsored by: Nokia
by writing all 1's to it to determine its length. This fixes issues with
MCFG on at least some machines where a trashed BAR claimed subsequent
attempts at PCI config transactions because the addresses in the MCFG
window fell in the decoding range of the BAR.
In general it is a bad idea to leave the BARs enabled while we are
frobbing with them in this manner.
Sleuthing by: tegge
MFC after: 1 week
The digi(4) driver directory contains some files that cannot be checked
out on Windows filesystems. This isn't a big deal, but the files aren't
used anyway.
There are still some other places where checkouts on Windows don't work,
such as VFS_MOUNT.9/vfs_mount.9. This should already be a small
improvement.
MFC after: 1 month
check on the sysctl argument value being RTF_LLINFO is conditioned on
the COMPAT_ROUTE_FLAGS kernel option. This mismatch caused the L2
table retrieval failure, and the arp/ndp -an command displays empty L2
tables.
Reviewed by: pjd
work when the bus attaches its own children. Instead of hardcoding a unit
number and returning BUS_PROBE_NOWILDCARD, which will break multiple iicbus
systems, check in the probe routine whether the device address is 0. Real
I2C devices will never have this address, but devices added with
BUS_ADD_CHILD() will.
Requested by: jhb
Reviewed by: jhb
- Add debug output
- Fix pmap_zero_page and related places: use uncached segments and invalidate
cache after zeroing memory.
- Do not test for modified bit if it's not neccessary
(merged from mips-juniper p4 branch)
- Some #includes reorganization
guarantee atomicity of the operation for other semaphore consumers.
In particular, this should guard against access to the semaphore with
not done or partially done MAC label assignment.
Reviewed by: rwatson
MFC after: 1 month
heavy loads or working. It looks this bug exists since r158869
so needs to revert a part of the previous.
Reviewed by: imp
Tested by: sam
MFC after: 3 weeks
So now, if you:
- specify "makeoptions DEBUG=-g" in your kernel config
- make buildkernel WITH_CTF=1,
then "-g" will be added to CTFFLAGS.
However, "-g" will still not be added to CTFFLAGS when building
kernel modules, if the above steps are performed. This needs to be fixed.
Noticed by: thompsa
The new behaviour is on by default, and can be disabled by setting the
net.inet.tcp.rfc3465 sysctl to 0 to obtain previous behaviour.
The patch changes struct tcpcb in sys/netinet/tcp_var.h which breaks
the ABI. Bump __FreeBSD_version to 800061 accordingly. User space tools
that rely on the size of struct tcpcb (e.g. sockstat) need to be recompiled.
Reviewed by: rpaulo, gnn
Approved by: gnn, kmacy (mentors)
Sponsored by: FreeBSD Foundation
power and thermal control, as well as GPIOs on Xserves and controlling
sound codecs for Apple built-in audio.
Submitted by: Marco Trillo
Obtained from: NetBSD
indicated I2C devices, and provides an ofw_bus interface for driver probing.
This should be MI, but is currently provided only on PowerPC due to lack of
sparc64 hardware with an I2C controller.
Discussed on: freebsd-arch
utilities, add the ${DEBUG} variable from the kernel config. Otherwise,
if we build a kernel with WITH_CTF=1 set, ctfmerge will not have
the -g flag set. In this case, the cc has -g specified, so the
.o files will have debug information generated, but since ctfmerge
does not have -g set, it will strip out the ELF sections containing
the DWARF debugging info, leading to a kernel without debugging symbols.
Reviewed by: jb
on SysV semaphores.
The squeeze of the semaphore array in the kern_semctl() modifies
sem_base for the semaphores with sem_base greater then sem_base of
the removed semaphore, as well as the values of the semaphores,
without locking their mutex. This can lead to (killable) hangs or
unexpected behaviour of the processes performing any sem operations
while other process does IPC_RMID.
The semexit_myhook() eventhandler unlocks SEMUNDO_LOCK() while
accessing *suptr. This allows for IPC_RMID for the sem id to be
performed in parallel with undo hook referenced by the current undo
structure. This leads to the panic("semexit - semid not allocated") [1].
The semaphore creation is protected by Giant, while IPC_RMID is done
while only semaphore mutex is held. This seems to result in invalid
values for semtot, causing random ENOSPC error returns [2].
Redo the locking of the semaphores lifetime cycle. Delegate the
sem_mtx to the sole purpose of protecting semget() and
semctl(IPC_RMID). Introduce new sem_undo_mtx to protect SEM_UNDO
handling. Remove the Giant remnants from the code.
Note that mac_sysvsem_check_semget() and mac_sysvsem_create() are
now called while sem_mtx is held, as well as mac_sysvsem_cleanup() [3].
When semaphore is removed, acquire semaphore locks for all semaphores
with sem_base that is going to be changed by squeeze of the sema
array. The lock order is not important there, because the region is
protected by sem_mtx.
Organize both used and free sem_undo structures into the lists,
protected by sem_undo_mtx. In semexit_myhook(), remove sem_undo
structure that is being processed, from used list, without putting it
onto the free to prevent modifications by other threads. This allows
for sem_undo_lock to be dropped to acquire individial semaphore locks
without violating lock order. Since IPC_RMID may no longer find this
sem_undo, do tolerate references to unallocated semaphores in undo
structure, and check sequential number to not undo unrelated semaphore
with the same id.
While there, convert functions definitions to ANSI C and fix small
style(9) glitches.
Reported by: Omer Faruk Sen <omerfsen gmail com> [1], pho [2]
Reviewed by: rwatson [3]
Tested by: pho
MFC after: 1 month
contrib/openbsm (svn merge) and src/sys/{bsm,security/audit} (manual
merge). Hook up bsm_domain.c and bsm_socket_type.c to the libbsm
build along with man pages, add audit_bsm_domain.c and
audit_bsm_socket_type.c to the kernel environment.
OpenBSM history for imported revisions below for reference.
MFC after: 1 month
Sponsored by: Apple Inc.
Obtained from: TrustedBSD Project
OpenBSM 1.1 alpha 5
- Stub libauditd(3) man page added.
- All BSM error number constants with BSM_ERRNO_.
- Interfaces to convert between local and BSM socket types and protocol
families have been added: au_bsm_to_domain(3), au_bsm_to_socket_type(3),
au_domain_to_bsm(3), and au_socket_type_to_bsm(3), along with definitions
of constants in audit_domain.h and audit_socket_type.h. This improves
interoperability by converting local constant spaces, which vary by OS, to
and from Solaris constants (where available) or OpenBSM constants for
protocol domains not present in Solaris (a fair number). These routines
should be used when generating and interpreting extended socket tokens.
- Fix build warnings with full gcc warnings enabled on most supported
platforms.
- Don't compile error strings into bsm_errno.c when building it in the kernel
environment.
- When started by launchd, use the label com.apple.auditd rather than
org.trustedbsd.auditd.
for jumbo frame.
o Nuke unneeded jlist lock which was used to protect jumbo buffer
management in local allocator.
o Added a new tunable hw.mskc.jumbo_disable to disable jumbo
frame support for the driver. The tunable could be set for
systems that do not need to use jumbo frames and it would
save (9K * number of Rx descriptors) bytes kernel memory.
o Jumbo buffer allocation failure is no longer critical error
for the operation of msk(4). If msk(4) encounter the allocation
failure it just disables jumbo frame support and continues to
work without your intervention.
Using local allocator had several drawbacks such as requirement of
large amount of continuous kernel memory and fixed (small) number
of available buffers. The need for large continuous memory resulted
in failure of loading driver with kldload on running systems.
Also small number of buffer used in local allocator showed poor
performance for some applications.
to be caused by a metadata corruption that occurs quite often after
unplugging a pendrive during write activity.
Reviewed by: scottl
Approved by: rwatson (mentor)
Sponsored by: FreeBSD Foundation
Add missing set frame data pointer call. The
function call was missed when zero copy was
introduced in UMASS.
Reported by: WATANABE Kazuhiro.
Submitted by: Hans Petter Selasky
Remove dependancy towards the USB config thread in
the USB serial core. Use USB process msignalling
instead. Saves a little memory and hopefully makes
the code more understandable.
Submitted by: Hans Petter Selasky
Remove "vbus_interrupt" method from bus methods and use
a global function instead for the various drivers using it.
The reason for the removal is to simplify the code.
Submitted by: Hans Petter Selasky
Reduce the number of callback processes to 4 per
USB controller. There are two rough categories:
1) Giant locked USB transfers.
2) Non-Giant locked USB transfers.
On a real system with many USB devices plugged in the
number of processes reported by "ps auxw | grep USBPROC"
was reduced from 40 to 18.
Submitted by: Hans Petter Selasky
This change is about removing three fields from "struct usb2_xfer"
which can be reached from "struct usb2_xfer_root" instead and cleaning
up the code after this change. The fields are "xfer->udev",
"xfer->xfer_mtx" and "xfer->usb2_sc". In this process the following
changes were also made:
Rename "usb2_root" to "xroot" which is short for "xfer root".
Rename "priv_mtx" to "xfer_mtx" in USB core.
The USB_XFER_LOCK and USB_XFER_UNLOCK macros should only be used in
the USB core due to dependency towards "xroot". Substitute macros
for the real lock in two USB device drivers.
Submitted by: Hans Petter Selasky
Factor out roothub process into the USB bus structure for
all USB controller drivers. Essentially I am trying to
save some processes on the root HUB and get away
from the config thread pradigm. There will be a follow up
commit where the root HUB control and interrupt callback
will be moved over to run from the roothub process.
Total win: 3 processes become 1 for every USB controller.
Submitted by: Hans Petter Selasky
Usability improvement. Make sure that setting
power mode ON resurrects the device if powered OFF.
Reported by: Alexander Best.
Submitted by: Hans Petter Selasky
Initial version of ATMEGA USB device controller
driver. Has not been tested on real hardware yet.
The driver is based upon the AT91DCI driver.
Submitted by: Hans Petter Selasky
o Eliminate tlb0[] (a s/w copy of TLB0)
- The table contents cannot be maintained reliably in multiple MMU
environments, where asynchronous events (invalidations from other cores)
can change our local TLB0 contents underneath.
- Simplify and optimize TLB flushing: system wide invalidations are
performed using tlbivax instruction (propagates to other cores), for
local MMU invalidations a new optimized routine (assembly) is introduced.
o Improve and simplify TID allocation and management.
- Let each core keep track of its TID allocations.
- Simplify TID recycling, eliminate dead code.
- Drop the now unused powerpc/booke/support.S file.
o Improve page tables management logic.
o Simplify TLB1 manipulation routines.
o Other improvements and polishing.
Obtained from: Freescale, Semihalf
- add a reference to the config(5) manpage;
- hopefully clarify the format of the 'env FILENAME' directive.
I am putting these notes in sys/${arch}/conf/GENERIC and not
in sys/conf/NOTES because:
1. i386/GENERIC already had reference to a similar option (hints..)
and to documentation (handbook)
2. GENERIC is what most users look at when they have to modify or
create a new kernel config, so having the suggestion there is
more effective.
I am only touching i386 and amd64 because the other GENERIC files
are already out of sync, and I am not sure what is the overall plan.
MFC after: 3 days
down will cause a fault. Check the phy power state before possibly
reading from the bb, this can happen as ar5212Reset intentionally
calls ar5212GetRfgain before bringing the bb out of reset (but we
do it here and not in the caller to guard against other possible uses).
expected in acd_fixate().
This should fix various problems folks are having with 'burncd' reporting
"burncd: ioctl(CDRIOCFIXATE): Input/output error" during the fixate phase
when "fixate" is issued together with the "data" command.
PR: 95979
Submitted by: Jaakko Heinonen <jh@saunalahti.fi>
by the new kernel option COMPAT_ROUTE_FLAGS for binary backward
compatibility. The RTF_LLDATA flag maps to the same value as RTF_LLINFO.
RTF_LLDATA is used by the arp and ndp utilities. The RTF_LLDATA flag is
always returned to the userland regardless whether the COMPAT_ROUTE_FLAGS
is defined.
changes since the last imported OpenBSM release:
OpenBSM 1.1 alpha 5
- Stub libauditd(3) man page added.
- All BSM error number constants with BSM_ERRNO_.
- Interfaces to convert between local and BSM socket types and protocol
families have been added: au_bsm_to_domain(3), au_bsm_to_socket_type(3),
au_domain_to_bsm(3), and au_socket_type_to_bsm(3), along with definitions
of constants in audit_domain.h and audit_socket_type.h. This improves
interoperability by converting local constant spaces, which vary by OS, to
and from Solaris constants (where available) or OpenBSM constants for
protocol domains not present in Solaris (a fair number). These routines
should be used when generating and interpreting extended socket tokens.
- Fix build warnings with full gcc warnings enabled on most supported
platforms.
- Don't compile error strings into bsm_errno.c when building it in the kernel
environment.
- When started by launchd, use the label com.apple.auditd rather than
org.trustedbsd.auditd.
Obtained from: TrustedBSD Project
Sponsored by: Apple Inc.
in the loopback and synthetic loopback code so that packets are
access control checked and relabeled. Previously, the MAC
Framework enforced that packets sent over the loopback weren't
relabeled, but this will allow policies to make explicit choices
about how and whether to relabel packets on the loopback. Also,
for SIMPLEX devices, this produces more consistent behavior for
looped back packets to the local MAC address by labeling those
packets as coming from the interface.
Discussed with: csjp
Obtained from: TrustedBSD Project
things around so the periph destructors look alike. Based on a patch
by Jaakko Heinonen.
Submitted by: Jaakko Heinonen
Reviewed by: scottl
Approved by: rwatson (mentor)
Sponsored by: FreeBSD Foundation
they label, derive that information implicitly from the set of label
initializers in their policy operations set. This avoids a possible
class of programmer errors, while retaining the structure that
allows us to avoid allocating labels for objects that don't need
them. As before, we regenerate a global mask of labeled objects
each time a policy is loaded or unloaded, stored in mac_labeled.
Discussed with: csjp
Suggested by: Jacques Vidrine <nectar at apple.com>
Obtained from: TrustedBSD Project
Sponsored by: Apple, Inc.
read with libkvm) to the addresses of a prison, when inside a
jail. [1]
As the patch from the PR was pre-'new-arp', add checks to the
llt_dump handlers as well.
While touching RTM_GET in route_output(), consistently use
curthread credentials rather than the creds from the socket
there. [2]
PR: kern/68189
Submitted by: Mark Delany <sxcg2-fuwxj@qmda.emu.st> [1]
Discussed with: rwatson [2]
Reviewed by: rwatson
MFC after: 4 weeks
applications to specify a non-local IP address when bind()'ing a socket
to a local endpoint.
This allows applications to spoof the client IP address of connections
if (obviously!) they somehow are able to receive the traffic normally
destined to said clients.
This patch doesn't include any changes to ipfw or the bridging code to
redirect the client traffic through the PCB checks so TCP gets a shot
at it. The normal behaviour is that packets with a non-local destination
IP address are not handled locally. This can be dealth with some IPFW hackery;
modifications to IPFW to make this less hacky will occur in subsequent
commmits.
Thanks to Julian Elischer and others at Ironport. This work was approved
and donated before Cisco acquired them.
Obtained from: Julian Elischer and others
MFC after: 2 weeks
jail-aware. Up to now we returned the first address of the interface
for SIOCGIFADDR w/o an ifr_addr in the query. This caused problems for
programs querying for an address but running inside a jail, as the
address returned usually did not belong to the jail.
Like for v6, if there was an ifr_addr given on v4, you could probe
for more addresses on the interfaces that you were not allowed to see
from inside a jail. Return an error (EADDRNOTAVAIL) in that case
now unless the address is on the given interface and valid for the
jail.
PR: kern/114325
Reviewed by: rwatson
MFC after: 4 weeks
- The contents of 'feroceon_cpufuncs' dispatch table was really dedicated for the
new Sheeva CPU (in 88F6xxx and MV-78xxx SOCs), and NOT Feroceon.
- Feroceon CPU (in 88F5xxx SOCs) appears as a regular ARM926EJ-S core and does
not require dedicated routines.
This will be accompanied by a file rename commit.
- Provide dedicated rmans for MEM and IO resources.
- Convert PCI IRQ routing info into a table (from callback approach), provide
config data for alternative DB- boards.
- Fix a wrong boundary check error in pcib_mbus_init_bar()
Obtained from: Semihalf
- Allow for setting per platform MPP/GPIO configuration in the kernel, so
that we can override all settings firmware might set.
- Set decode windows for the remaining on-chip peripherals: CESA, SATA and XOR.
- Improve handling of USB controllers so that all port are available on the
given SOC/platform (e.g. up to three on DB-78xxx), this includes rework of
USB decode windows set-up.
- Other minor fixes and cosmetics.
Obtained from: Semihalf
created by atapicam is being kept opened or mounted. This is probably just
a temporary solution until we invent something better.
Reviewed by: scottl
Approved by: rwatson (mentor)
Sponsored by: FreeBSD Foundation
Reported by: Jaakko Heinonen
o add net80211 support for a tdma vap that is built on top of the
existing adhoc-demo support
o add tdma scheduling of frame transmission to the ath driver; it's
conceivable other devices might be capable of this too in which case
they can make use of the 802.11 protocol additions etc.
o add minor bits to user tools that need to know: ifconfig to setup and
configure, new statistics in athstats, and new debug mask bits
While the architecture can support >2 slots in a TDMA BSS the current
design is intended (and tested) for only 2 slots.
Sponsored by: Intel
- Clean up TCLK handling so that it's dynamically recognized depending on
registers settings or chip version/revision. Update registers definitions.
- Teach SOC ident routine about A0 (initial silicon version for general
audience)
Obtained from: Marvell, Semihalf
locked. Lookup could attempt to recursively lock that vnode.
Do not call vn_start_write(V_WAIT) while vnode is locked, this may
result in a deadlock with suspension.
vfs_busy() the mountpoint before dropping vnode lock for vnode
that was used to look up the mountpoint, to prevent unmount in
between.
Reported and tested by: pho
Reviewed by: rwatson
MFC after: 3 weeks
This fixes problems with discovering some USB devices that are very slow to
respond during initialisation.
When a USB device is inserted, CAM performs the sequence:
1) INQUIRY
2) INQUIRY (second time with other parameters)
3) TEST UNIT READY
4) READ CAPACITY
Before this change CAM didn't check if TEST UNIT READY was successful and went
on blindly to the next state and sent READ CAPACITY. If the device was still
not ready by then, CAM ended with error message. This patch adds checking for the
status of TEST UNIT READY command and retrying up to 10 times with 0.5 sec
interval.
Submitted by: Grzegorz Bernacki gjb ! semihalf dot com
Reviewed by: scottl
1.Sync TD on close to ensure USB request in close callback issued.
2.Add sysctls to indicate device role.
3.Enable handsfree port support.
Now modem port and obex port works well.
Handsfree port works but not with good response.
When trying to read scratched or damaged CDs and DVDs, the default
mechanism is sub-optimal. Programs like ddrescue do much better if
you turn off retries entirely, since their algorithms are designed
scan big areas fast, then winnow the areas down. Turning off retries
speeds these programs up by as much as 20x, since the drive is able to
'stream past' many small errors...
The sysctl/tunable kern.cam.cd.retry_count controls this. That
defaults to '4' (for a total of 5 attempts). Setting to 0 turns off
all retry attempts.
Reviewed by: scottl@
specifically SPI controllers now also work in big-endian
machines and some conversions relevant for FC and SAS
controllers as well as support for ILP32 machines which all
were omitted in previous attempts are now also implemented.
The IOCTL-interface is intentionally left (and where needed
actually changed) to be completely little-endian as otherwise
we would have to add conversion code for every possible
configuration page to mpt(4), which didn't seem the right
thing to do, neither did converting only half of the user-
interface to the native byte order.
This change was tested on amd64 (SAS+SPI), i386 (SAS) and
sparc64 (SAS+SPI). Due to lack of the necessary hardware
the target mode code is still left to be made endian-clean.
Reviewed by: scottl
MFC after: 1 month
functions and stop attaching of dcons(4) and dcons_crom(4) if
they indicate failure. This fixes a panic seen on sparc64 machines
with no free physical memory in the requested 32-bit region but
still doesn't make dcons(4)/dcons_crom(4) these work. I think
the latter can be fixed by simply specifying ~0UL as the upper
limit for contigmalloc(9) and letting the bounce pages and the
IOMMU respectively handle limitations of the DMA engine. I didn't
want to change that without the consensus of simokawa@ though,
who unfortunately didn't reply so far.
MFC after: 1 week
installing the kernel allows one, like with modules, to override
the default user/group and install as non-su to a temporary
directory to test, create images or seed a tftp dir.
Reviewed by: Andrzej Tobola <ato@iem.pw.edu.pl>
MFC after: 4 weeks
module. These files cause manual interaction when building
ports/audio/aureal-kmod which provides a usable i386-only driver (it requires
linking against some linux object files distributed by vendor which bankrupted
back in 2000).
MFC after: 1 week
subclasses as are available with PCI. Changes I2C device drivers without
real probe logic to return BUS_PROBE_NOWILDWARD to avoid interference with
firmware bus enumeration, and reduces the probe priority of the iicbus
base driver to allow subclass attachment at higher priority.
Discussed on: freebsd-arch
lock in order to avoid the lock acquire hit if the pipe list is very
likely empty.
Obtained from: TrustedBSD Project
MFC after: 3 weeks
Sponsored by: Apple, Inc.
allowing the full 16-bit width of the corresponding fields in the
VTOC8 label to be used. The removed limits basically only held
true for providers labeled using the synthetic geometry provided
by cam_calc_geometry(9) but neither SCSI disks labeled with Solaris
nor sufficiently large ATA disks.
- Given that providers (originally) labeled with Solaris typically
use the native geometry as reported by the target while FreeBSD
typically uses a synthetic one put the message complaining about
mismatching geometries between what the label indicates and what
GEOM thinks the provider has, which we generally can't help,
under bootverbose in order to not unnecessarily scare users.
- For informational purposes add the non-matching values to the
message complaining about them, similar to what r186501 did for
g_part_bsd_read() except also indicating the origin of the
values.
- Make it clear that the messages emitted by this code refer to
the VTOC8 support rather than to another existing scheme or to
VTOC32.
record is active on the current thread--historically we may always
have wanted to enter the audit code if auditing was enabled, but now
we just commit the audit record so don't need to enter if there isn't
one.
Obtained from: TrustedBSD Project
Sponsored by: Apple, Inc.
the KASSERT and checks suggested.
Reviewed by: The udp tunneling was discussed on net@ under the
thread entitled "Heads up -- Thinking about UDP and tunneling"
- Remove unused typedefs to avoid confusion and ease in merging
ip6protosw with protosw.
- Correct a few comments.
- Remove most of a comment about usrreq. [1]
- Use tabs instead of spaces for consistency.
Submitted by: rwatson [1]
Reviewed by: rwatson
MFC after: 3 weeks
would fail to attach due to unsupported USB revision. It should have
no effect when running on a real hardware.
Reviewed by: imp
Approved by: rwatson (mentor)
belonging to a devices children, in analogy to the way we handle interrupts
for SCC serial devices. This is required to counteract overly deep nesting
on onboard audio devices.
Submitted by: Marco Trillo
- Implement NP (ASCII 12, Form Feed). When used with cons25, it should
clear the screen and place the cursor at the top of the screen. When
used with xterm, it should just simulate a newline.
- When we want to use xterm emulation, make teken_demo set TERM to
xterm.
Spotted by: Paul B. Mahol <onemda@gmail.com>
driver since it couldn't have worked with NEWCARD w/o these fixes.
This should allow selecting 16-bit memory width as well (which was
what was broken).
functions used in the bootloader. The goal is to make the code more
readable and smaller (especially because we have size issues
in the loader's environment).
High level description of the changes:
+ define some string manipulation functions to improve readability;
+ create functions to manipulate module descriptors, removing some
duplicated code;
+ rename the error codes to ESOMETHING;
+ consistently use set_environment_variable (which evaluates
$variables) when interpreting variable=value assignments;
I have tested the code, but there might be code paths that I have
not traversed so please let me know of any issues.
Details of this change:
--- loader.4th ---
+ add some module operators, to remove duplicated code while parsing
module-related commands:
set-module-flag
enable-module
disable-module
toggle-module
show-module
--- pnp.4th ---
+ move here the definition related to the pnp devices list, e.g.
STAILQ_* , pnpident, pnpinfo
--- support.4th ---
+ rename error codes to capital e.g. ENOMEM EFREE ... and do obvious
changes related to the renaming;
+ remove unused structures (those relevant to pnp are moved to pnp.4th)
+ various string functions
- strlen removed (it is an internal function)
- strchr, defined as the C function
- strtype -- type a string to output
- strref -- assign a reference to the string on the stack
- unquote -- remove quotes from a string
+ remove reset_line_buffer
+ move up the 'set_environment_variable' function (which now
uses the interpreter, so $variables are evaluated).
Use the function in various places
+ add a 'test_file function' for debugging purposes
MFC after: 4 weeks
to GENERIC configuration files. This brings what's in 8.x in sync
with what is in 7.x, but does not change any current defaults.
Possibly they should now be enabled in head by default?
Because we now have cons25-style linewrapping, we must also use cons25-
style reverse linewrapping. This means that a ^H on column 0 will move
the cursor one line up.
Also fix a small regression: if the user invokes a RIS (Reset to Initial
State), we must show the cursor again.
Spotted by: Paul B. Mahol <onemda gmail com>
did not use C99-style sparse structure initialization, so remove
NULL assignments for now-removed pr_usrreq function pointers.
Reported by: Chris Ruiz <yr.retarded at gmail.com>
During boot, the domain list is locked with Giant. It is not possible to
register any protocols after the system has booted, so the lock is only
used to protect insertion of entries.
There is already a mutex in uipc_domain.c called dom_mtx. Use this mutex
to lock the list, instead of using Giant. It won't matter anything with
respect to performance, but we'll never get rid of Giant if we don't
remove from places where we don't need it.
Approved by: rwatson
MFC after: 3 weeks
o Don't check the dummy fields.
o The entry is unused if either dp_mid is 0 or dp_sid is 0.
o The start or end cylinder cannot be 0.
o The start CHS cannot be equal to the end CHS.
Submitted by: nyan
With cons25, there are printable characters below 0x1B. This is not the
case with ASCII, UTF-8, etc. but in this case we just have to.
Also don't set LC_CTYPE to UTF-8 when libteken is compiled without UTF-8
in the demo-application.
src/lib/libusb20/libusb20_desc.c
Make "libusb20_desc_foreach()" more readable.
src/sys/dev/usb2/controller/*.[ch]
src/sys/dev/usb2/core/*.[ch]
Implement support for USB power save for all HC's.
Implement support for Big-endian EHCI.
Move Huawei quirks back into "u3g" driver.
Improve device enumeration.
src/sys/dev/usb2/ethernet/*[ch]
Patches for supporting new AXE Gigabit chipset.
src/sys/dev/usb2/serial/*[ch]
Fix IOCTL return code.
src/sys/dev/usb2/wlan/*[ch]
Sync with old USB stack.
Submitted by: hps
It turns out I was looking too much at mimicing xterm, that I didn't
take the differences of cons25 into account. There are some differences
between xterm and cons25 that are important. Create a new #define called
TEKEN_CONS25 that can be toggled to switch between cons25 and xterm
mode.
- Don't forget to redraw the cursor after processing a forward/backward
tabulation.
- Implement cons25-style (WYSE?) autowrapping. This form of autowrapping
isn't that nice. It wraps the cursor when printing something on column
80. xterm wraps when printing the first character that doesn't fit.
- In cons25, a \t shouldn't overwrite previous contents, while xterm
does.
Reported by: Garrett Cooper <yanefbsd gmail com>
cells in the map, instead of using a value passed to it and then panicing if it
disagrees. This fixes interrupt map parsing for PCI bridges on some Apple
Uninorth PCI controllers.
Reported by: marcel
Tested on: G4 iBook, Sun Ultra 5
of the counter, that may happen when too many sendfile(2) calls are
being executed with this vnode [1].
To keep the size of the struct vm_page and offsets of the fields
accessed by out-of-tree modules, swap the types and locations
of the wire_count and cow fields. Add safety checks to detect cow
overflow and force fallback to the normal copy code for zero-copy
sockets. [2]
Reported by: Anton Yuzhaninov <citrin citrin ru> [1]
Suggested by: alc [2]
Reviewed by: alc
MFC after: 2 weeks
disabled entirely, which is its default state before set to a
non-zero value.
PR: 128790
Submitted by: Nick Hilliard <nick at foobar dot org>
MFC after: 3 weeks
to ip_output(). The destionation is represented in a sockaddr{} object
that may contain other pieces of information, e.g., port number. This
same destination sockaddr{} object may be passed into L2 code, which
could be used to create a L2 entry. Since there exists a L2 table per
address family, the L2 lookup function can make address family specific
comparison instead of the generic bcmp() operation over the entire
sockaddr{} structure.
Note in the IPv6 case the sin6_scope_id is not compared because the
address is currently stored in the embedded form inside the kernel.
The in6_lltable_lookup() has to account for the scope-id if this
storage format were to change in the future.
During startup some of the syscons TTY's are used to set attributes like
the screensaver and mouse options. These actions cause /dev/console to
be rendered unusable.
Fix the issue by leaving the TTY opened when it is used as the console
device.
Reported by: imp
The cursor is only inside the scrolling region when we are in origin
mode. In that case, it should use originreg instead of scrollreg. It is
completely valid to place the cursor outside the scrolling region.
the field in the mbuf constructors, since otherwise we have no way to
tell if they are valid. In the future, Kip has plans to add a flag
specifically to indicate validity, which is the preferred model.
whole KVA space using one locked 4MB dTLB entry per GB of physical
memory. On Cheetah-class machines only the dt16 can hold locked
entries though, which would be completely consumed for the kernel
TSB on machines with >= 16GB. Therefore limit the KVA space to use
no more than half of the lockable dTLB slots, given that we need
them also for other things.
- Add sanity checks which ensure that we don't exhaust the (lockable)
TLB slots.
Some time ago I started working on a library called libteken, which is
terminal emulator. It does not buffer any screen contents, but only
keeps terminal state, such as cursor position, attributes, etc. It
should implement all escape sequences that are implemented by the
cons25 terminal emulator, but also a fair amount of sequences that are
present in VT100 and xterm.
A lot of random notes, which could be of interest to users/developers:
- Even though I'm leaving the terminal type set to `cons25', users can
do experiments with placing `xterm-color' in /etc/ttys. Because we
only implement a subset of features of xterm, this may cause
artifacts. We should consider extending libteken, because in my
opinion xterm is the way to go. Some missing features:
- Keypad application mode (DECKPAM)
- Character sets (SCS)
- libteken is filled with a fair amount of assertions, but unfortunately
we cannot go into the debugger anymore if we fail them. I've done
development of this library almost entirely in userspace. In
sys/dev/syscons/teken there are two applications that can be helpful
when debugging the code:
- teken_demo: a terminal emulator that can be started from a regular
xterm that emulates a terminal using libteken. This application can
be very useful to debug any rendering issues.
- teken_stress: a stress testing application that emulates random
terminal output. libteken has literally survived multiple terabytes
of random input.
- libteken also includes support for UTF-8, but unfortunately our input
layer and font renderer don't support this. If users want to
experiment with UTF-8 support, they can enable `TEKEN_UTF8' in
teken.h. If you recompile your kernel or the teken_demo application,
you can hold some nice experiments.
- I've left PC98 the way it is right now. The PC98 platform has a custom
syscons renderer, which supports some form of localised input. Maybe
we should port PC98 to libteken by the time syscons supports UTF-8?
- I've removed the `dumb' terminal emulator. It has been broken for
years. It hasn't survived the `struct proc' -> `struct thread'
conversion.
- To prevent confusion among people that want to hack on libteken:
unlike syscons, the state machines that parse the escape sequences are
machine generated. This means that if you want to add new escape
sequences, you have to add an entry to the `sequences' file. This will
cause new entries to be added to `teken_state.h'.
- Any rendering artifacts that didn't occur prior to this commit are by
accident. They should be reported to me, so I can fix them.
Discussed on: current@, hackers@
Discussed with: philip (at 25C3)
When sysctl() is being called with a buffer that is too small, it will
return ENOMEM. Unfortunately the changes I made the other day sets the
error number to 0, because it just returns the error number of the
copyout(). Revert this part of the change.
Add support to uscanner.c for known-working devices
(the same should be done for uscanner2.c).
Waiting for 7.1 to be released before the merge.
MFC after: 3 weeks
contrib/openbsm (svn merge) and src/sys/{bsm,security/audit} (manual
merge). Add libauditd build parts and add to auditd's linkage;
force libbsm to build before libauditd.
OpenBSM history for imported revisions below for reference.
MFC after: 1 month
Sponsored by: Apple Inc.
Obtained from: TrustedBSD Project
OpenBSM 1.1 alpha 4
- With the addition of BSM error number mapping, we also need to map the
local error number passed to audit_submit(3) to a BSM error number,
rather than have the caller perform that conversion.
- Reallocate user audit events to avoid collisions with Solaris; adopt a
more formal allocation scheme, and add some events allocated in Solaris
that will be of immediate use on other platforms.
- Add an event for Calife.
- Add au_strerror(3), which allows generating strings for BSM errors
directly, rather than requiring applications to map to the local error
space, which might not be able to entirely represent the BSM error
number space.
- Major auditd rewrite for launchd(8) support. Add libauditd library
that is shared between launchd and auditd.
- Add AUDIT_TRIGGER_INITIALIZE trigger (sent via 'audit -i') for
(re)starting auditing under launchd(8) on Mac OS X.
- Add 'current' symlink to active audit trail.
- Add crash recovery of previous audit trail file when detected on audit
startup that it has not been properly terminated.
- Add the event AUE_audit_recovery to indicated when an audit trail file
has been recovered from not being properly terminated. This event is
stored in the new audit trail file and includes the path of recovered
audit trail file.
- Mac OS X and FreeBSD dependent code in auditd.c is separated into
auditd_darwin.c and auditd_fbsd.c files.
- Add an event for the posix_spawn(2) and fsgetpath(2) Mac OS X system
calls.
- For Mac OS X, we use ASL(3) instead of syslog(3) for logging.
- Add support for NOTICE level logging.
OpenBSM 1.1 alpha 3
- Add two new functions, au_bsm_to_errno() and au_errno_to_bsm(), to map
between BSM error numbers (largely the Solaris definitions) and local
errno(2) values for 32-bit and 64-bit return tokens. This is required
as operating systems don't agree on some of the values of more recent
error numbers.
- Fix a bug how au_to_exec_args(3) and au_to_exec_env(3) calculates the
total size for the token. This buge.
- Deprecated Darwin constants, such as TRAILER_PAD_MAGIC, removed.
vm_map_lookup{,_locked}() to vm_map_lookup_entry(). Having the fast path
in vm_map_lookup{,_locked}() limits its benefits to page faults. Moving
it to vm_map_lookup_entry() extends its benefits to other operations on
the vm map.
did not compared nc_dvp with supplied parent directory vnode pointer.
Add the check and note that now branches for vp != NULL and vp == NULL
are the same, thus can be merged.
Reported and reviewed by: kan
Tested by: pho
MFC after: 2 weeks
and re-enable it as default.
In particular:
+ re-enable the 'update' flag in the Makefile (of course!);
+ commit Warner's patch "orb $NOUPDATE,_FLAGS(%bp)"
to avoid writing to disk in case of a timeout/default choice;
+ fix an off-by-one count in the partition scan code that would
print the wrong name for unknown partitions;
+ unconditionally change the boot prompt to 'Boot:' instead of 'Default:'
to make room for the extra code/checks/messages. Some of the changes
listed below are also made to save space;
+ rearrange and fix comments for known partition types. Right now we
explicitly recognise *BSD, Linux, FAT16 (type 6, used on many USB keys),
NTFS (type 7), FAT32 (type 11).
Depending on other options we also recognise Extended (type 5),
FAT12 (type 1) and FAT16 < 32MB (type 4).
+ Add an entry "F6 PXE" when the code is built with -DPXE (which is
a default now). Technically, F6 boots through INT18, so the prompt 'PXE'
is a bit misleading. Unfortunately the name INT18
is too long and does not fit in - we could use ROM perhaps.
The reason I picked 'PXE' is that on many (I believe) new systems
INT18 calls PXE.
Apart from the choice of the name for PXE/ROM/INT18, this should close
pending issues on the 1-sector boot0 code and we should be able to
move the code to RELENG_7 when it reopens.
No boot0cfg changes are necessary.
MFC after: 3 weeks
It seems I forgot to remove `int error' from a single piece of code. I'm
also moving ogetkerninfo() to kern_xxx.c, because it belongs to the
class of compat system information system calls, not the generic sysctl
code.
pfs_vncache_free() that removes pvd from the list, while it is not yet
put on the list.
Prevent the invalid removal from the list by clearing pvd_next and
pvd_prev for the newly allocated pvd, and only move pfs_vncache list
head when the pvd was at the head.
Suggested and approved by: des
MFC after: 2 weeks
In the existing code we didn't really enforce that callers hold Giant
before calling userland_sysctl(), even though there is no guarantee it
is safe. Fix this by just placing Giant locks around the call to the oid
handler. This also means we only pick up Giant for a very short period
of time. Maybe we should add MPSAFE flags to sysctl or phase it out all
together.
I've also added SYSCTL_LOCK_ASSERT(). We have to make sure sysctl_root()
and name2oid() are called with the sysctl lock held.
Reviewed by: Jille Timmermans <jille quis cx>
compare map->timestamp with saved timestamp after map read lock is
reacquired, not with saved timestamp + 1. The only consequence of the +1
was unconditional lookup of the next map entry, though.
Tested by: pho
Approved by: des
MFC after: 2 weeks
may need to lock arbitrary vnodes, causing either lock order reversal or
recursive vnode lock acquisition.
Tested by: pho
Approved by: des
MFC after: 2 weeks
do pfs_vncache_alloc() for the same pfs_node and pid. In this case, we
could end up with two vnodes for the pair. Recheck the cache under the
locked pfs_vncache_mutex after all sleeping operations are done [1].
This case mostly cannot happen now because pseudofs uses exclusive vnode
locking for lookup. But it does drop the vnode lock for dotdot lookups,
and Marcus' pseudofs_vptocnp implementation is vulnerable too.
Do not call free() on the struct pfs_vdata after insmntque() failure,
because vp->v_data points to the structure, and pseudofs_reclaim()
frees it by the call to pfs_vncache_free().
Tested by: pho [1]
Approved by: des
MFC after: 2 weeks
Log:
- merge in latest xenbus from dfr's xenhvm
- fix race condition in xs_read_reply by converting tsleep to mtx_sleep
Log:
unmask evtchn in bind_{virq, ipi}_to_irq
Log:
- remove code for handling case of not being able to sleep
- eliminate tsleep - make sleeps atomic
changes since the last imported OpenBSM release:
OpenBSM 1.1 alpha 4
- With the addition of BSM error number mapping, we also need to map the
local error number passed to audit_submit(3) to a BSM error number,
rather than have the caller perform that conversion.
- Reallocate user audit events to avoid collisions with Solaris; adopt a
more formal allocation scheme, and add some events allocated in Solaris
that will be of immediate use on other platforms.
- Add an event for Calife.
- Add au_strerror(3), which allows generating strings for BSM errors
directly, rather than requiring applications to map to the local error
space, which might not be able to entirely represent the BSM error
number space.
- Major auditd rewrite for launchd(8) support. Add libauditd library
that is shared between launchd and auditd.
- Add AUDIT_TRIGGER_INITIALIZE trigger (sent via 'audit -i') for
(re)starting auditing under launchd(8) on Mac OS X.
- Add 'current' symlink to active audit trail.
- Add crash recovery of previous audit trail file when detected on audit
startup that it has not been properly terminated.
- Add the event AUE_audit_recovery to indicated when an audit trail file
has been recovered from not being properly terminated. This event is
stored in the new audit trail file and includes the path of recovered
audit trail file.
- Mac OS X and FreeBSD dependent code in auditd.c is separated into
auditd_darwin.c and auditd_fbsd.c files.
- Add an event for the posix_spawn(2) and fsgetpath(2) Mac OS X system
calls.
- For Mac OS X, we use ASL(3) instead of syslog(3) for logging.
- Add support for NOTICE level logging.
OpenBSM 1.1 alpha 3
- Add two new functions, au_bsm_to_errno() and au_errno_to_bsm(), to map
between BSM error numbers (largely the Solaris definitions) and local
errno(2) values for 32-bit and 64-bit return tokens. This is required
as operating systems don't agree on some of the values of more recent
error numbers.
- Fix a bug how au_to_exec_args(3) and au_to_exec_env(3) calculates the
total size for the token. This bug resulted in "unknown" tokens being
printed after the exec args/env tokens.
- Support for AUT_SOCKET_EX extended socket tokens, which describe a
socket using a pair of IPv4/IPv6 and port tuples.
- OpenBSM BSM file header version bumped for 1.1 release.
- Deprecated Darwin constants, such as TRAILER_PAD_MAGIC, removed.
Obtained from: TrustedBSD Project
Sponsored by: Apple Inc.
options. Using the already included std.avila is not considered
to be entirely right (and the options slightly differ) but the best
match we currently have. Upcoming work should fit better.
Reorder another variable to match the layout of other configs.
Reviewed by: sam, warner (earlier version with options removed)
variable name for the inpcb.
For consistency with the other *_hdrsiz functions use 'size'
instead of 'siz' as variable name.
No functional change.
MFC after: 4 weeks
- Always use round brackets with return ().
- Add empty line to beginning of functions without local variables.
- Comments start with a capital letter and end in a '.'.
While there adapt a few comments.
Reviewed by: rwatson
MFC after: 4 weeks
arrays under #ifndef XEN to make XEN config compile again.
In case of Xen vm_guest is hard coded.
Move the list for the vm_guest sysctl out of the restictive
bounds as the sysctl is there in either case.
Note, that the patch provided with this card for the Linux states that
the card uses DEFAULT_RCLK * 2, while in fact it is '* 10'. So probably
we should also use the subdevice/subvendord here. For now just ignore
that fact.
PR: kern/129665
Submitted by: bsam
Obtained from: united efforst with bsam
plex. If the plex is a raid5 plex, and is being written to, parity data might
have to be read from the underlying disks, requiring them to be opened for
reading as well as writing.
MFC after: 1 week
Now the NDISulator supports NDIS USB drivers that it've tested with
devices as follows:
- Anygate XM-142 (Conexant)
- Netgear WG111v2 (Realtek)
- U-Khan UW-2054u (Marvell)
- Shuttle XPC Accessory PN20 (Realtek)
- ipTIME G054U2 (Ralink)
- UNiCORN WL-54G (ZyDAS)
- ZyXEL G-200v2 (ZyDAS)
All of them succeeded to attach and worked though there are still some
problems that it's expected to be solved.
To use NDIS USB support, you should rebuild and install ndiscvt(8) and
if you encounter a problem to attach please set `hw.ndisusb.halt' to
0 then retry.
I expect no changes of the NDIS code for PCI, PCMCIA devices.
Obtained from: //depot/projects/ndisusb/...
Disable some unneeded pathes in overcomplicated input mixer to help parser
to handle the rest better. This gives mic input boost control in some
configurations and just more predictable operation in others.
1. The "route" command allows route insertion through the interface-direct
option "-iface". During if_attach(), an sockaddr_dl{} entry is created
for the interface and is part of the interface address list. This
sockaddr_dl{} entry describes the interface in detail. The "route"
command selects this entry as the "gateway" object when the "-iface"
option is present. The "arp" and "ndp" commands also interact with the
kernel through the routing socket when adding and removing static L2
entries. The static L2 information is also provided through the
"gateway" object with an AF_LINK family type, similar to what is
provided by the "route" command. In order to differentiate between
these two types of operations, a RTF_LLDATA flag is introduced. This
flag is set by the "arp" and "ndp" commands when issuing the add and
delete commands. This flag is also set in each L2 entry returned by the
kernel. The "arp" and "ndp" command follows a convention where a RTM_GET
is issued first followed by a RTM_ADD/DELETE. This RTM_GET request fills
in the fields for a "rtm" object, which is reinjected into the kernel by
a subsequent RTM_ADD/DELETE command. The entry returend from RTM_GET
is a prefix route, so the RTF_LLDATA flag must be specified when issuing
the RTM_ADD/DELETE messages.
2. Enforce the convention that NET_RT_FLAGS with a 0 w_arg is the
specification for retrieving L2 information. Also optimized the
code logic.
Reviewed by: julian
the following operations, e.g.:
1) ifconfig tun0 create
2) ifconfig tun0 10.1.1.1 10.1.1.2
3) route add -net 192.103.54.0/24 -iface tun0
4) ifconfig tun0 destroy
If cv wait on the TUN_CLOSED flag, then the last operation (4) will
block forever.
Revert the previous changes and fix the mtx_unlock() leak.
invariants and approach for protocol switch methods in protsw_init(),
and also some KASSERT's for non-domain init entries in protocol
switch tables: pru_abort and pru_send must both be implemented.
For now, leave those assertions #if 0'd, since there are a few
protocols that violate them in non-harmful ways. Whether or not we
should enforce pru_abort being implemented for non-stream protocols
is an interesting question: currently abort is only invoked on stream
sockets in situations where un-accepted sockets must be abruptly
closed (i.e., close() on a listen socket with pending connections),
but in principle it is useful for datagram sockets and most datagram
socket types implement it.
MFC after: 3 weeks
by adding a separate TUN_CLOSED flag that is set after tunclose is done referencing it.
- drop the tun_mtx after the flag check to avoid holding it across if_detach which can recurse in to
if_tun.c
FPA floating-point format is identical to the VFP format,
but is always stored in big-endian.
Introduce _IEEE_WORD_ORDER to describe the byte-order of
the FP representation.
Obtained from: Juniper Networks, Inc
looked up would have v_dd set to a non-NULL value. This fixes a panic
seen when running installworld on a diskless system with a separate /usr
file system.
Submitted by: cracauer
Approved by: kib
Note that you need at least xf86-video-intel 2.4.3 for this to work.
The G4X doesn't put the GATT into the same area of stolen memory
as all the other chips and older versions of the driver didn't
handle that properly.
Tested by: ganbold
Approved by: kib
MFC after: 2 weeks
Note that there is no working backend (or at least
that is mentioned in the PR ticket) but the device
is now supported on our end.
PR: 117205
Submitted by: Artem Naluzhnyy <tut at nhamon dot com dot ua>
MFC after: 1 week
o check feature bits when probing NPE ethernet support
o move firmware loading logic from if_npe to core npe support
o allow multiple refs to core NPE driver
o while here fix hw.npe.debug tunable path
o add definitions for more bits, for masking out IXP465-specific bits,
and %b format string
o add ixp4xx_read_feature_bits to retrieve the mask of valid features
(aka fuse bits)
o add cpu_is_ixp42x() macro
o print feature bits at boot
o add EHCI_SCFLG_BIGEMMIO flag to force big-endian byte-select to be
set in USBMODE
o split reset work into new public routine ehci_reset so bus shim drivers
can force big-endian byte-select before ehci_init
long commands into multiple requests. [08:12]
Avoid calling uninitialized function pointers in protocol switch
code. [08:13]
Merry Christmas everybody...
Approved by: so (cperciva)
Approved by: re (kensmith)
Security: FreeBSD-SA-08:12.ftpd, FreeBSD-SA-08:13.protosw
mac_proc_vm_revoke_recurse() requests a read lock on the vm map at the start
but does not handle failure by vm_map_lock_upgrade() when it seeks to modify
the vm map. At present, this works because all lock request on a vm map are
implemented as exclusive locks. Thus, vm_map_lock_upgrade() is a no-op that
always reports success. However, that is about to change, and
proc_vm_revoke_recurse() will require substantial modifications to handle
vm_map_lock_upgrade() failures. For the time being, I am changing
mac_proc_vm_revoke_recurse() to request a write lock on the vm map at the
start.
Approved by: rwatson
MFC after: 3 months
firmware versions which wedge when using the OFW test service,
so given that we don't really depend on SUNW,stop-self just nuke
it altogether instead of risking problems.
- At least Fire V880 have a small hardware glitch which causes the
reception of IDR_NACKs for CPUs we actually haven't tried to send
an IPI to, even not as part of the initial try. According to tests
this apparently can be safely ignored though, so just return if
checking for the individual IDR_NACKs indicates no outstanding
dispatch. Serializing the sending of IPIs between MD and MI code
by the combined usage of smp_ipi_mtx makes no difference to this
phenomenon. [1]
- Provide relevant debugging bits already with the initial panic
in case of problems with the IPI dispatch, which would have
allowed to diagnose the above problem without a specially built
kernel.
- In case of cheetah_ipi_selected() base the delay we wait for
other CPUs which also might want to dispatch IPIs on the total
amount of CPUs instead of just the number of CPUs we let this
CPU send IPIs to because in the worst case all CPUs also want
to IPI us at the same time.
Reported and access for extensive tests provided by: Beat Gaetzi [1]
destroy operation until the referenced clone device has
been closed by the process properly. The behavior is now
consistently with the previous release.
Reviewed by: Kip Macy
event from mii(4) may not be delivered if valid link was already
established. To address the issue, check current link state after
driving MII_TICK. This should fix a regression introduced in
r184245.
PR: kern/129647
event from mii(4) may not be delivered if valid link was already
established. To address the issue, check current link state after
driving MII_TICK. This should fix a regression introduced in
r185753 on fast ethernet controllers.
Reported by: csjp, Bruce Cran < bruce <> cran DOT org DOT uk >
Tested by: csjp, Bruce Cran (initial version)
In r185891 I removed the newlines from messages written to /dev/console,
because it made startup messages from rc-scripts harder to read. This,
unfortunately, causes the kernel message that is printed after a
non-terminated log message to be concatenated.
This could be fixed, but on short term it's better to just revert the
change.
Reported by: Jaakko Heinonen <jh saunalahti fi>
Inside ptsdrv_{in,out}wakeup() we call KNOTE_LOCKED() to wake up any
kevent(2) users. Because the kqueue handlers are executed synchronously,
we must set PTS_FINISHED before calling ptsdrv_{in,out}wakeup().
Discovered by: nork
Right now the wchan strings "ttyinp" and "ttybgw" only differ one
character from the strings we used prior to MPSAFE TTY. Just rename them
back to their pre-MPSAFE TTY counterparts.
Also rename "ttylck" to "ttymtx", which should make it more clear that a
process is blocked on the TTY mutex, not some other form of locking.
o add support for IXP435 cpu's (e.g. 64 irq's)
o add support for Cambria-specific devices: npe, led's (front panel and
octal latch), ehci, mcu, ide cf
o redo memory mapping for xscale/ixp4xx boards: previously memory
was assumed aliased to 0x10000000 but this appears to be true only
for ixp425 systems and breaks operation on others; rework so memory
is assumed to start at 0
o rework NPE configuration support to use NPE id's instead of port #'s;
these changes also rename the associated MAC's to follow the NPE's
they are attached to
o update npe firmware to latest rev (same license) and update default fw
imageid's to match; in particular this adds NPE-A and crypto support
o re-style NPE fw handling code and add a console msg identifying the
attributes of the loaded fw
o fix numerous problems with handling failures during npe setup
o fix npe rx q setup; need to spin waiting for mailbox responses during
early boot stages as qmgr interrupts are not delivered; this fixes
the problem where all 8 traffic classifications were not tied to the
rx q (and eliminates the console msg "remember to fix rx q setup")
o add DELAY to npe MII wait logic for IXP435
o strip down builtin phys->virt address translation table in resource
handling to just those resources that require it and add a console msg
to alert people when this (kludge) table needs to be extended
o purge a bunch of dead netbsd-ism's
o cleanup avila led driver
o add Cambria support to boot2 and rework code for better multi-board support
Notes:
1. NPE-A doesn't work and causes NPE-C to stop working; it is disabled
in the hints
2. USB isn't working yet; controller communicates ok but device
discovery fails
3. Cambria support must be configured separately from IXP425 boards;
multi-board support is TBD
Sponsored by: Hobnob, Gateworks (board donation)
Reviewed by: imp
o add support to byte swap EHCI descriptor contents; the IXP435
has dual-EHCI controllers integral but descriptor contents are
in big-endian format; this support is configured with the
USB_EHCI_BIG_ENDIAN_DESC option and enabled with EHCI_SCFLG_BIGEDESC
o clean up EHCI USBMODE register setup during init; add #defines for
bit values
o split debug support out into a new file and enable use through ddb
o while here remove a bunch of lingering netbsd-isms
Reviewed by: imp
of OFW access semantics, in order to allow future support for real-mode
OF access and flattened device frees. OF client interface modules are
implemented using KOBJ, in a similar way to the PPC PMAP modules.
Because we need Open Firmware to be available before mutexes can be used on
sparc64, changes are also included to allow KOBJ to be used very early in
the boot process by only using the mutex once we know it has been initialized.
Reviewed by: marius, grehan
This commit is slightly different from the original patch in the PR:
1. EM_ALPHA keeps the old value for compatibility reason.
2. Non-standard SHT_NUM is not added.
3. Style.
PR: kern/118540
Submitted by: "Pedro F. Giffuni" <giffunip[at]tutopia.com>
Intel 855 chips present the same pci id for both heads. This prevents
us from attaching to the dummy second head. All other chips that I
am aware of either only present a single pci id, or different ids
for each head so that we only match on the correct head.
Approved by: kib@
MFC after: 2 weeks
storage class. This check was lost. It is not important for the most cases,
but as it was reported on current@, it does important for sis driver and
surely inportant for AHCI driver. So restore it there.
Submitted by: Toshikazu ICHINOSEKI, Andrey V. Elsukov
Discussed on: current@
ati pci gart to use bus_dma to handle the allocations. This fixes
a garbled screen issue on at least some radeons (X1400 tested). It is
also likely that this is the correct fix for PR# 119324, though that
is not confirmed yet.
Reviewed by: jhb@ (mentor, prior version)
Approved by: kib@
MFC after: 2 weeks
be fatal so just inform about this instead of panicing.
- Ensure we use the right softc in case the interrupt of a child is
is routed to the companion PBM instead. This hasn't been seen in the
wild so far but given that it's the case for the Schizo interrupts,
handling this situation also for child interrupts as a precaution
seemed a good idea.
- Deal with broken firmware versions which miss child entries in the
ino-bitmap as seen on V880 by belatedly registering as interrupt
controller in schizo_setup_intr(). [1]
- Add missing '\n' when printing the warning regarding Schizo Errata
I-13.
Reported and tested by: Beat Gaetzi [1]
- Make LBC resources management self-contained: introduce explicit LBC
resources definition (much like the OCP), provide dedicated rman for LB mem
space.
- Full configuration of an LB chip select device: program LAW and BR/OR, map
into KVA, handle all LB attributes (bus width, machine select, ecc,
write protect etc).
- Factor out LAW manipulation routines into shared code, adjust OCP area
accordingly.
- Other LBC fixes and clean-ups.
Obtained from: Semihalf
NULL pointer to struct mount if the looked up vnode is reclaimed. Also,
these syscalls only mnt_ref() the mp, still allowing it to be unmounted;
only struct mount memory is kept from being reused.
Lock the vnode when doing name lookup, then reference its mount point,
unlock the vnode and vfs_busy the mountpoint. This sequence shall take
care of both races.
Reported and tested by: pho
Discussed with: attilio
MFC after: 1 month
payload length in TSO case. Leaving unused TBD also seem to cause
SCB timeouts under certain conditions when TSO/non-TSO traffics
are active at the same time.
Add code to the Chelsio driver so that it can recognize different
module types which may be plugged into it, including SR, LR lasers
and TWINAX copper cables.
Obtained from: Chelsio Inc.
MFC after: 1 week
it running under a virtual environment. This also introduces a globally
accessible variable vm_guest that can be used where appropriate in the
kernel to inspect this environment.
To make it easier for the long run, an enum VM_GUEST is also introduced,
which could possibly be factored out in a header somewhere (but the
question is where - vm/vm_param.h? sys/param.h?) so it eventually becomes
a part of the standard KPI. In any case, it's a start.
The purpose of all this isn't to absolutely detect that the OS is running
under a virtual environment (cf. "redpill") but to allow the parts of the
kernel and the userland that care about this particular aspect and can do
something useful depending on it to have a standardised interface. Reducing
kern.hz is one example but there are other things that could be done like
avoiding context switches, not using CPU instructions that are known to be
slow in emulation, possibly different strategies in VM (memory) allocation,
CPU scheduling, etc.
It isn't clear if the JAILS/VIMAGE functionality should also be exposed
by this particular mechanism (probably not since they're not "full"
virtual hardware environments). Sometime in the future another sysctl and
a variable could be introduced to reflect if the kernel supports any kind
of virtual hosting (e.g. VMWare VMI, Xen dom0).
Reviewed by: silence from src-commiters@, virtualization@, kmacy@
Approved by: gnn (mentor)
Security: Obscurity doesn't help.
- split bootstrap code into more modular routines, which will also be used for
the non-booting cores
- clean up registers usage
- improve comments to better reflect reality
- eliminate dead or redundant code
- other minor fixes
This refactoring is a preliminary step before importing dual-core (MPC8572)
support.
Obtained from: Freescale, Semihalf
had been the only flag with random usage patterns.
Switch inc_flags to be used as a real bit field by using
INC_ISIPV6 with bitops to check for the 'isipv6' condition.
While here fix a place or two where in case of v4 inc_flags
were not properly initialized before.[1]
Found by: rwatson during review [1]
Discussed with: rwatson
Reviewed by: rwatson
MFC after: 4 weeks
command whenever Tx completion interrupt is raised. The Tx poll
bit is cleared when all packets waiting to be transferred have been
processed. This means the second Tx poll command can be silently
ignored as the Tx poll bit could be still active while processing
of previous Tx poll command is in progress.
To address the issue re(4) used to invoke the Tx poll command in Tx
completion handler whenever it detects there are pending packets in
TxQ. However that still does not seem to completely eliminate
watchdog timeouts seen on RealTek PCIe controllers. To fix the
issue kick Tx poll command only after Tx completion interrupt is
raised as this would indicate Tx is now idle state such that it can
accept new Tx poll command again. While here apply this workaround
for PCIe based controllers as other controllers does not seem to
have this limitation.
Tested by: Victor Balada Diaz < victor <> bsdes DOT net >
out of sleep mode prior to accessing to PHY. This should fix device
attach failure seen on these controllers. Also enable the sleep
mode when device is put into sleep state.
PR: kern/123123, kern/123053
* Remove trailing whitespace (added in r186162)
* Reduce indentation by rephrasing test
Submitted by: Christopher Mallon (christoph dot mallon at gmx dot de)
- threadA runs vfs_rel(mp1)
- threadB does unmount the mp1 fs, sets MNTK_UNMOUNT and drop MNT_ILOCK()
- threadA runs vfs_busy(mp1) and, as long as, MNTK_UNMOUNT is set, sleeps
waiting for threadB to complete the unmount
- threadB, in vfs_mount_destroy(), finds mnt_lock > 0 and sleeps waiting
for the refcount to expire.
Fix the deadlock by adding a flag called MNTK_REFEXPIRE which signals the
unmounter is waiting for mnt_ref to expire.
The vfs_busy contenders got awake, fails, and if they retry the
MNTK_REFEXPIRE won't allow them to sleep again.
2) Simplify significantly the code of vfs_mount_destroy() trimming
unnecessary codes:
- as long as any reference exited, it is no-more possible to have
write-op (primarty and secondary) in progress.
- it is no needed to drop and reacquire the mount lock.
- filling the structures with dummy values is unuseful as long as
it is going to be freed.
Tested by: pho, Andrea Barberio <insomniac at slackware dot it>
Discussed with: kib
anything other than 0. Make it so. This fixes
"panic: VOP_STRATEGY failed bp=0xc320dd90 vp=0xc3b9f648",
encountered when writing to an orphaned filesystem. Reason
for the panic was the following assert:
KASSERT(i == 0, ("VOP_STRATEGY failed bp=%p vp=%p", bp, bp->b_vp));
at vfs_bio:bufstrategy().
Reviewed by: scottl, phk
Approved by: rwatson (mentor)
Sponsored by: FreeBSD Foundation
result in panic:
mdconfig -af blah.img -o force
mount /dev/md0 /mnt
mdconfig -du 0
Reviewed by: scottl
Approved by: rwatson (mentor)
Sponsored by: FreeBSD Foundation
o Add support for compiling elf64 for this file (the rest of the changes are
coming later)
o Fill in some misssing relocation types. We need to support these in
elf_machdep.c's relocation routines eventually, but that's future work
too.
the device, which means refcount on periph drivers never drops,
which means cam_sim_free() never returns, which results in umass
sleeping there ad infinitum.
Submitted by: pjd
Reviewed by: scottl, pjd
Approved by: rwatson (mentor)
Sponsored by: FreeBSD Foundation
unregistration, and execution:
- Add some brackets for clarity and trim a bit of vertical whitespace.
- Remove comments that may not contribute to clarity, such as "Lock"
before acquiring a lock and "Get memory" before allocating memory.
- During hook registration, don't drop pfil_list_lock between checking
for a duplicate and registering the hook, as this leaves a race
condition by failing to enforce the "no duplicate hooks" invariant.
- Don't lock the hook during registration, since it's not yet in use.
- Document assumption that hooks will be quiesced before being
unregistered.
- Don't write-lock hooks during removal because they are assumed
quiesced.
- Rename "done" label to "locked_error" to be clear that it's an error
path on the way out of hook execution.
MFC after: pretty soon
does - in DragonFly, it's cam_sim_release() what actually frees the
SIM; cam_sim_free does nothing more than calling cam_sim_release().
Here, we drain in cam_sim_free, waiting for refcount to drop to zero.
We cannot do the same think DragonFly does, because after cam_sim_free
returns, client would destroy the sim->mtx, and CAM would trip over
an initialized mutex.
Reviewed by: scottl
Approved by: rwatson (mentor)
Sponsored by: FreeBSD Foundation
to actually use it would panic on mtx operation, as dead_sim doesn't
have a proper mutex. Even if it had a properly initialized mutex,
it wouldn't have properly locked and owned one.
Reviewed by: scottl
Approved by: rwatson (mentor)
Sponsored by: FreeBSD Foundation
configuration registers (which are not going to change) on every interrupt
looks expensive, especially when interrupt is shared. Profiling shows me 3%
of time spent by atapci0 on pure network load due to IRQ sharing with em0.
separate index variable.
It gives more then double rc4_init() performance increase on tested i386 P4.
It also gives about 15% speedup to PPTP VPN with stateless MPPE encryption
(by ng_mppc) which calls rc4_init() for every packet.
- Initialize variables before use.
- Remove a KASSERT() that could falsely trigger if there are other sources
of NMIs in the system.
Efficiency tweak:
- When checking PMCs that overflowed, ignore PMCs that were not configured for
sampling.
a real packet error but simply indicate that an unexpected unicast or multicast
error was received by the NIC, which was not counted in the past as well.
Reported by: many (on -stable@)
Reviewed by: davidch
MFC after: 3 days
On HyperThreading CPUs logical cores have same frequency, so setting it
on any core will change the other's one. In most cases first request
to the second core will be the "set" request, done after setting frequency
of the first core. In such case second CPU will obtain throttled frequency
of the first core as it's max_mhz making cpufreq broken due to different
frequency sets.
(e.g. ath): we must check the key index and not whether the key
points at a cipher other than "undef". This looks like it's been
broken for a while. Might be worth adding an explicit clear cipher
at some point though this would require changes to the usage of
IEEE80211_KEY_UNDEFINED.
PR: 125906
same LOM hardware with goofed-up EEPROM programming also needed reading the
Ethernet address from the chips registers as the EEPROM did not have a
sensible address programmed.
Patch developed by: pyun@
Funky hardware on loan: www.id-it.nl
MFC after: 2 weeks
the inpcb names rather than the following IPv6 compat macros:
in6pcb,in6p_sp, in6p_ip6_nxt,in6p_flowinfo,in6p_vflag,
in6p_flags,in6p_socket,in6p_lport,in6p_fport,in6p_ppcb and
sotoin6pcb().
Apart from removing duplicate code in netipsec, this is a pure
whitespace, not a functional change.
Discussed with: rwatson
Reviewed by: rwatson (version before review requested changes)
MFC after: 4 weeks (set the timer and see then)
controllers. Reading this register, for which there are indications
that it doesn't really exist, returns 0 on at least some 12160
and doing so on Sun Fire V880 causes a data access error exception.
Reported and tested by: Beat Gaetzi
Approved by: mjacob
Obtained from: OpenBSD (modulo setting isp_lvdmode)
the code for parsing interrupt maps) to PowerPC and reflect their new MI
status by moving them to the shared dev/ofw directory.
This commit also modifies the OFW PCI enumeration procedure on PowerPC to
allow the bus to find non-firmware-enumerated devices that Apple likes to add,
and adds some useful Open Firmware properties (compat and name) to the pnpinfo
string of children on OFW SBus, EBus, PCI, and MacIO links. Because of the
change to PCI enumeration on PowerPC, X has started working again on PPC
machines with Grackle hostbridges.
Reviewed by: marius
Obtained from: sparc64
1. separating L2 tables (ARP, NDP) from the L3 routing tables
2. removing as much locking dependencies among these layers as
possible to allow for some parallelism in the search operations
3. simplify the logic in the routing code,
The most notable end result is the obsolescent of the route
cloning (RTF_CLONING) concept, which translated into code reduction
in both IPv4 ARP and IPv6 NDP related modules, and size reduction in
struct rtentry{}. The change in design obsoletes the semantics of
RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland
applications such as "arp" and "ndp" have been modified to reflect
those changes. The output from "netstat -r" shows only the routing
entries.
Quite a few developers have contributed to this project in the
past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and
Andre Oppermann. And most recently:
- Kip Macy revised the locking code completely, thus completing
the last piece of the puzzle, Kip has also been conducting
active functional testing
- Sam Leffler has helped me improving/refactoring the code, and
provided valuable reviews
- Julian Elischer setup the perforce tree for me and has helped
me maintaining that branch before the svn conversion
really was meant to be 256. Adjust usage accordingly and replace
bogus usage of this value in checking IEEE channel #'s.
NB: this causes an ABI change; ifconfig must be recompiled
indicates if an association id is required before outbound traffic
is permitted. This cleans up the previous change that broke mcast
traffic "to the stack" in ap mode as a side effect.
Reviewed by: sephe, thompsa, weongyo
src into the tree. The old split was balanced on module dependencies
and symbol exposure that no longer exists. Users that want a module
setup with rate control algorithm other than sample must override
ATH_RATE in the ath module Makefile.
Reviewed by: imp
to keep for 7-STABLE when MFCing in_pcbladdr() to not change the
behaviour there.
With this a destination route via a loopback interface is treated as
a valid and reachable thing for IPv4 source address selection, even
though nothing of that network is ever directly reachable, but it is
more like a blackhole route.
With this the source address will be selected and IPsec can grab the
packets before we would discard them at a later point, encapsulate them
and send them out from a different tunnel endpoint IP.
Discussed on: net
Reported by: Frank Behrens <frank@harz.behrens.de>
Tested by: Frank Behrens <frank@harz.behrens.de>
MFC after: 4 weeks (just so that I get the mail)
Remove ng_rmnode_flags() function.
ng_rmnode_self() was made to be called only while having node locked.
When node is properly locked, any function call sent to it will always be
queued. So turning ng_rmnode_self() into the ng_rmnode_flags() is not just
meaningless, but incorrent, as it violates node locking when called outside.
No objections: julian, thompsa
variable in this copy of the code[1].
While here prefix the variables with 'pf_' to avoid file static global
variables with colliding names that are or will be virtualized.
Discussed with: rwatson, silby [1]
by redoing the Open Firmware card initialization calls in ofwfb_set_mode(). This
uses the same trick (setting V_ADP_MODECHANGE) to arrange this as machfb(4) and
creatorfb(4).
but formerly missed under VIMAGE_GLOBAL.
Put the extern declarations of the virtualized globals
under VIMAGE_GLOBAL as the globals themsevles are already.
This will help by the time when we are going to remove the globals
entirely.
Sponsored by: The FreeBSD Foundation
time it is marked for user space callchain capture in the NMI
handler and the time the callchain capture callback runs.
- Improve code and control flow clarity by invoking hwpmc(4)'s user
space callchain capture callback directly from low-level code.
Reviewed by: jhb (kern/subr_trap.c)
Testing (various patch revisions): gnn,
Fabien Thomas <fabien dot thomas at netasq dot com>,
Artem Belevich <artemb at gmail dot com>
if (batt_sleep_ms)
AcpiOsSleep(1);
where the rest are all:
if (batt_sleep_ms)
AcpiOsSleep(batt_sleep_ms);
I can't recall why that one was different, so change it
to match the rest.
Pointed out by: Christoph Mallon
MFC after: 2 weeks
All ioctl()'s that aren't implemented by pts(4) are forwarded to the TTY
itself. Unfortunately this is not correct for FIONREAD, because it will
give the wrong amount of bytes that are available to read.
Tested by: keramida
Reminded by: keramida
On some laptops with smart batteries, enabling battery monitoring
software causes keystrokes from atkbd to be lost. This has also been
reported on Linux, and is apparently due to the keyboard and I2C line
for the battery being routed through the same chip. Whether that's
accurate or not, adding extra sleeps to the status checking code
causes the problem to go away.
I've been running this for nearly six months now on my laptop,
it works like a charm.
Reviewed by: Nate Lawson (in a previous revision)
MFC after: 2 weeks
o recognize ixp435 cpu
o change memory layout for for ixp4xx to not assume memory is aliases
to 0x10000000 (Cambria/ixp435 memory starts at zero)
o handle 64 irqs for ixp435
o dual EHCI USB 2.0 controller integral to ixp435
o overhaul NPE code for ixp435 and better MAC+MII naming
o updated NPE firmware (including NPE-A image for ixp435/ixp465)
o Gateworks Cambria board support:
- IDE compact flash
- MCU
- front panel LED on i2c bus
- Octal LED latch
Sanity-tested with NFS-root on Avila and Cambria boards. Requires
pending boot2 mods for CF-boot on Cambria.
error is not EAGAIN. Several sysctls that inspect another process use
p_candebug() for checking access right for the curproc. p_candebug()
returns EAGAIN for some reasons, in particular, for the process doing
exec() now. If execing process tries to lock Giant, we get a livelock,
because sysctl handlers are covered by Giant, and often do not sleep.
Break the livelock by dropping Giant and allowing other threads to
execute in the EAGAIN loop.
Also, do not return EAGAIN from p_candebug() when process is executing,
use more appropriate EBUSY error [1].
Reported and tested by: pho
Suggested by: rwatson [1]
Reviewed by: rwatson, des
MFC after: 1 week
state changes. This change modifies tunopen and tunclose to call the
if_link_state_change() function. Among other things, this will result in
devd(8) receiving events from devctl(4) for linkup/link down. This allows
us to do several useful things, including initializing tunnel parameters
and adding routes.
Discussed on: freebsd-net@
MFC after: 2 weeks
on a best-effort basis. Teach vn_fullpath to use this new VOP if a
regular VFS cache lookup fails. This VOP is designed to supplement the
VFS cache to provide a better chance that a vnode-to-name lookup will
succeed.
Currently, an implementation for devfs is being committed. The default
implementation is to return ENOENT.
A big thanks to kib for the mentorship on this, and to pho for running it
through his stress test suite.
Reviewed by: arch
Approved by: kib
One thing I didn't expect many applications to use, was kqueue() on
pseudo-terminal master devices. There are applications that use kqueue()
on the TTY itself (rtorrent, etc). That doesn't mean we shouldn't
implement this. Libraries like libevent use kqueue() by default, which
means they wouldn't be able to use kqueue().
The old TTY layer implements a very broken version of kqueue() by
performing the actual polling on the TTY device.
Discussed with: peter
When I added RLIMIT_NPTS, I forgot to add it to rlimit_ident[]. Make
sure the rlimit_ident[] array is always RLIM_NLIMITS elements big. So if
we ever forget to add new rlimits to this list again. it will contain a
null pointer, instead of random data.
Spotted by: rwatson
missed under VIMAGE_GLOBAL.
Start putting the extern declarations of the virtualized globals
under VIMAGE_GLOBAL as the globals themsevles are already.
This will help by the time when we are going to remove the globals
entirely.
While there garbage collect a few dead externs from ip6_var.h.
Sponsored by: The FreeBSD Foundation
o Try to be smarter about reading the ExCA CSC register. Now, we only
do it for 16-bit cards. Add some experimental code to treat it like
a power interrupt, but I'm not 100% sure that I like it. It may be
removed upon further testing. It seemed to help in one test case, but
the evidence may be inconclusive. This may be beneficial for cleaning up
exca_reset and exca_wait_ready.
o Check for CSTS events on the socket event register. We ask for it when
we're powering up a card, but I don't think we're otherwise using
it. Just ACK the interrupt for now. In theory, we can use it
instead of the busy wait we do in cbb_cardbus_reset. More research
is necessary to see if we can optimize things there when we're
waiting for the DEVVENDOR register to become valid.
o Rework the comments a bit. Minor tidying up. Etc.
outside the prison_states array.
When checking if there is a name configured for the prison, check the
first character to not be '\0' instead of checking if the char array
is present, which it always is. Note, that this is different for the
*jailname in the syscall.
Found with: Coverity Prevent(tm)
CID: 4156, 4155
MFC after: 4 weeks (just that I get the mail)
jhb probably forgot to commit this file with r185878 and will want to
review this. It unbreaks the build here.
Obtained from: p4 //depot/user/jhb/lock/compat/freebsd32/freebsd32_signal.h#2
container structures, depending on VIMAGE_GLOBALS compile time option.
Make VIMAGE_GLOBALS a new compile-time option, which by default will not
be defined, resulting in instatiations of global variables selected for
V_irtualization (enclosed in #ifdef VIMAGE_GLOBALS blocks) to be
effectively compiled out. Instantiate new global container structures
to hold V_irtualized variables: vnet_net_0, vnet_inet_0, vnet_inet6_0,
vnet_ipsec_0, vnet_netgraph_0, and vnet_gif_0.
Update the VSYM() macro so that depending on VIMAGE_GLOBALS the V_
macros resolve either to the original globals, or to fields inside
container structures, i.e. effectively
#ifdef VIMAGE_GLOBALS
#define V_rt_tables rt_tables
#else
#define V_rt_tables vnet_net_0._rt_tables
#endif
Update SYSCTL_V_*() macros to operate either on globals or on fields
inside container structs.
Extend the internal kldsym() lookups with the ability to resolve
selected fields inside the virtualization container structs. This
applies only to the fields which are explicitly registered for kldsym()
visibility via VNET_MOD_DECLARE() and vnet_mod_register(), currently
this is done only in sys/net/if.c.
Fix a few broken instances of MODULE_GLOBAL() macro use in SCTP code,
and modify the MODULE_GLOBAL() macro to resolve to V_ macros, which in
turn result in proper code being generated depending on VIMAGE_GLOBALS.
De-virtualize local static variables in sys/contrib/pf/net/pf_subr.c
which were prematurely V_irtualized by automated V_ prepending scripts
during earlier merging steps. PF virtualization will be done
separately, most probably after next PF import.
Convert a few variable initializations at instantiation to
initialization in init functions, most notably in ipfw. Also convert
TUNABLE_INT() initializers for V_ variables to TUNABLE_FETCH_INT() in
initializer functions.
Discussed at: devsummit Strassburg
Reviewed by: bz, julian
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
by running the tunable_mbinit() SYSINIT at SI_ORDER_MIDDLE
before the init_maxsockets() SYSINT at SI_ORDER_ANY.
Reviewed by: rwatson, zec
Sponsored by: The FreeBSD Foundation
MFC after: 4 weeks
The /dev/console device node logs all strings that are written to it.
When the string does not contain a trailing newline, it appends one. I
can imagine this was useful a long time ago, but with our current
rc-scripts, it generates a whole bunch of messages that look like:
| Configuring syscons:
| blanktime
| .
By not appending the newlines, the output of `dmesg -a' is now (almost?)
exactly the same as what the user will see on the console device
(syscons, uart).
aio code and are registered via the recently added SYSCALL32_*() helpers.
- Since the aio code likes to invoke fuword and suword a lot down in the
"bowels" of system calls, add a structure holding a set of operations for
things like storing errors, copying in the aiocb structure, storing
status, etc. The 32-bit system calls use a separate operations vector to
handle fuword32 vs fuword, etc. Also, the oldsigevent handling is now
done by having seperate operation vectors with different aiocb copyin
routines.
- Split out kern_foo() functions for the various AIO system calls so the
32-bit front ends can manage things like copying in and converting
timespec structures, etc.
- For both the native and 32-bit aio_suspend() and lio_listio() calls,
just use copyin() to read the array of aiocb pointers instead of using
a for loop that iterated over fuword/fuword32. The error handling in
the old case was incomplete (lio_listio() just ignored any aiocb's that
it got an EFAULT trying to read rather than reporting an error), and
possibly slower.
MFC after: 1 month
causes data corruption in combination with certain bridges.
Information about this problem was kindly provided by davidch. [1]
- As BGE_FLAG_PCIX is meant to indicate that the controller is in
PCI-X mode, revert to the pre __FreeBSD_version 602101 method of
reading the bus mode register rather than checking the mere
existence of a PCI-X capability, which is also there when the
NIC f.e. is put into a 32-bit slot causing it not to be in PCI-X
mode. Setting BGE_FLAG_PCIX inappropriately could cause the NIC
to be tuned incorrectly.
PR: 128833 [1]
Reviewed by: jhb
MFC after: 3 days
When VLAN tagged frame is received the hardware sets 'LONG' bit of
Rx status word. It is always set when the size of received frame
exceeded 1518 bytes, including CRC. This VLAN tagged frame clears
'OK' bit of Rx status word such that driver should not rely on 'OK'
bit of Rx status word to pass the VLAN tagged frame to upper stack.
To fix the bug, don't use SIS_CMDSTS_PKT_OK for Rx error check and
introduce SIS_RXSTAT_ERROR macro that checks Rx errors. If we are
configured to accept VLAN tagged frames and the received frame size
is less than or equal to maximum allowed length of VLAN tagged
frame, clear 'LONG' bit of Rx status word before checking Rx
errors.
Reported by: Vladimir Ermako < samflanker <> gmail DOT com >
Tested by: Vladimir Ermako < samflanker <> gmail DOT com >
to read-locking in the TCP input path, allowing greater TCP
input parallelism where multiple ithreads or ithread and netisr
are able to run in parallel. Previously, most TCP input paths
held a write lock on the global tcbinfo lock, effectively
serializing TCP input.
Before looking up the connection, acquire a write lock if a
potentially state-changing flag is set on the TCP segment header
(FIN, RST, SYN), and otherwise a read lock. We may later have
to upgrade to a write lock in certain cases (ACKs received by the
syncache or during TIMEWAIT) in order to support global state
transitions, but this is never required for steady-state packets.
Upgrading from a write lock to a read lock must be done as a
trylock operation to avoid deadlocks, and actually violates the
lock order as the tcbinfo lock preceeds the inpcb lock held at
the time of upgrade. If the trylock fails, we bump the refcount
on the inpcb, drop both locks, and re-acquire in-order. If
another thread has freed the connection while the locks are
dropped, we free the inpcb and repeat the lookup (this should
hardly ever or never happen in practice).
For now, maintain a number of new counters measuring how many
times various cases execute, and in particular whether various
optimistic assumptions about when read locks can be used, whether
upgrades are done using the fast path, and whether connections
close in practice in the above-described race, actually occur.
MFC after: 6 weeks
Discussed with: kmacy
Reviewed by: bz, gnn, kmacy
Tested by: kmacy
incremented using in_pcbref(), and decremented using in_pcbfree()
or inpcbrele(). Protocols using only current in_pcballoc() and
in_pcbfree() calls will see the same semantics, but it is now
possible for TCP to call in_pcbref() and in_pcbrele() to prevent
an inpcb from being freed when both tcbinfo and per-inpcb locks
are released. This makes it possible to safely transition from
holding only the inpcb lock to both tcbinfo and inpcb lock
without re-looking up a connection in the input path, timer
path, etc.
Notice that in_pcbrele() does not unlock the connection after
decrementing the refcount, if the connection remains, so that
the caller can continue to use it; in_pcbrele() returns a flag
indicating whether or not the inpcb pointer is still valid, and
in_pcbfee() is now a simple wrapper around in_pcbrele().
MFC after: 1 month
Discussed with: bz, kmacy
Reviewed by: bz, gnn, kmacy
Tested by: kmacy
message for r185765.
Noted by: rdivacky
Requested by: des
Commit message for r185765 should be:
In procfs map handler, and in linprocfs maps handler, do not call
vn_fullpath() while having vm map locked. This is done in anticipation
of the vop_vptocnp commit, that would make vn_fullpath sometime
acquire vnode lock.
Also, in linprocfs, maps handler already acquires vnode lock.
No objections from: des
MFC after: 2 week
sbuf instead of doing uiomove. This allows for reads from non-zero
offsets to work.
Patch is forward-ported des@' one, and was adopted to current code
by dchagin@ and me.
Reviewed by: des (linprocfs part)
PR: kern/101453
MFC after: 1 week
does final drop of the the dq reference to put it onto the free list.
There is a possibility that the dq would be found by another thread
after sync and before the dqh lock is acquired. If that other thread
drops the dq before we have taken the dqh lock, the dirty dq is put on
the free list.
Recheck the DQ_MOD after the dqh lock is relocked. Repeat dqsync() if
the dq is dirty. This ensures that up to date dq is written in the quota
file and fixes assertion in dqget().
Reported and tested by: Frode Nordahl <frode nordahl net>
MFC after: 3 days
Waiting for 1ms for each GMII register access looks overkill and it
may also decrease overall performance of driver because re(4)
invokes mii_tick for every hz.
Tested by: rpaulo
laptops. This includes battery presence detection, charging status, current
and voltage readouts, and charge level indication. The sysctl interface
is somewhat ACPI-like.
established a valid link or not. In miibus_statchg handler add a
check for established link is valid one for the controller(e.g.
1000baseT is not a valid link for fastethernet controllers.)
o Added a flag RE_FLAG_FASTETHER to mark fastethernet controllers.
o Added additional check to know whether we've really encountered
watchdog timeouts or missed Tx completion interrupts. This change
may help to track down the cause of watchdog timeouts.
o In interrupt handler, removed a check for link state change
interrupt. Not all controllers have the bit and re(4) did not
rely on the event for a long time. In addition, re(4) didn't
request the interrupt in RL_IMR register.
Tested by: rpaulo
drivers, there should be a 1us delay after every write when
bit-banging the MII. Also insert barriers in order to ensure
the intended ordering. These changes hopefully will solve the
bus wedging occasionally experienced with DM9102A since r182461.
- Deobfuscate dc_mii_readreg() a bit.
loader_conf_files="foo bar baz"
should cause loading the files listed, and then resume with the
remaining config files (from previous values of the variable).
Unfortunately, sometimes the line was ignored -- actually even
modifying the line in /boot/default/loader.conf sometimes doesn't work.
ANALYSIS: After much investigation, turned out to be a bug in the logic.
The existing code detected a new assignment by looking at the address
of the the variable containing the string. This only worked by pure
chance, i.e. if the new string is longer than the previous value
then the memory allocator may return a different address
to store the string hence triggering the detection.
SOLUTION: This commit contains a minimal change to fix the problem,
without altering too much the existing structure of the code.
However, as a step towards improving the quality and reliability of
this code, I have introduced a handful of one-line functions
(strget, strset, strfree, string= ) that could be used in dozens
of places in the existing code.
HOWEVER:
There is a much bigger problem here. Even though I am no Forth
expert (as most fellow src committers) I can tell that much of the
forth code (in support.4th at least) is in severe need of a
review/refactoring:
+ pieces of code are replicated multiple times instead of writing
functions (see e.g. set_module_*);
+ a lot of stale code (e.g. "structure" definitions for
preloaded_files, kernel_module, pnp stuff) which is not used
or at least belongs elsewhere.
The code bload is extremely bad as the loader runs with very small
memory constraints, and we already hit the limit once (see
http://svn.freebsd.org/viewvc/base?view=revision&revision=185132
Reducing the footprint of the forth files is critical.
+ two different styles of coding, one using pure stack functions
(maybe beautiful but surely highly unreadable), one using
high level mechanisms to give names to arguments and local
variables (which leads to readable code).
Note that this code is used by default by all FreeBSD installations,
so the fragility and the code bloat are extremely damaging.
I will try to work fixing the three items above, but if others have
time, please have a look at these issues.
MFC after: 4 weeks
multiple algorithms and potentially collect multiple samples.
Instead of a single calibration interval we now have short and long
intervals; the long interval roughly corresponds to the previous
single interval. The short interval is used to speedup collection
of samples and happens much quicker. We make calls using the short
interval until we're told the calibration work is complete at which
point we fallback to the long interval. In addition there is a
much longer reset interval used to flush all calibration state and
cause everthing to start anew.
With these changes you can also disable calibration entirely by
setting the long interval to zero.
at. I don't think this will make a huge difference, but I have
received a report of a interrupt storm on one 16-bit card that this
might fix (chances are it won't, since I think that we may need to
check both the CBB registers for the 16-bit card as well as the PCIC
registers for power state change).
Submitted by: jhb@
the power interrupt and init code waiting for the interrupt are
running on different CPUs. I haven't seen this make any real
difference, but I've also had some reports of odd behavior I can't
otherwise explain. It is an infrequent operation, and certainly
wouldn't hurt.
my right mouse button and keyboard LEDs from working due to mangled
configuration packets. Fixed several other races and associated problems in the
main ADB stack that were exposed while fixing this.
Now it is possible to suspend/resume with inserted and active card.
To reinitialize card on resume and to detect card change while suspended,
implement bus rescan routines. It can also be used by controllers without
card presence detection signals or with multiple cards per slot support.
While there, cleanup msleep() usage. We have no any rights to exit without
"request done" signal from driver as it could lead to modify after free.
RTFREE_LOCKED() here. This macro makes sure the reference count
on the route is being managed properly. This elimates another
case which results in the following message being printed to the
console:
rtfree: 0xc841ee88 has 1 refs
Reviewed by: bz
MFC after: 2 weeks
bit of debugging afterwards):
- Fix protection code for notification generation.
- Decouple associd from vtag
- Allow vtags to have less strigent requirements in non-uniqueness.
o don't pre-hash them when you issue one in a cookie.
o Allow duplicates and use addresses and ports to
discriminate amongst the duplicates during lookup.
- Add support for the NAT draft draft-ietf-behave-sctpnat-00, this
is still experimental and needs more extensive testing with the
Jason Butt ipfw changes.
- Support for the SENDER_DRY event to get DTLS in OpenSSL working
with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon).
- Update the support of SCTP-AUTH by Peter Lei.
- Use macros for refcounting.
- Fix MTU for UDP encapsulation.
- Fix reporting back of unsent data.
- Update assoc send counter handling to be consistent with endpoint sent counter.
- Fix a bug in PR-SCTP.
- Fix so we only send another FWD-TSN when a SACK arrives IF and only
if the adv-peer-ack point progressed. However we still make sure
a timer is running if we do have an adv_peer_ack point.
- Fix PR-SCTP bug where chunks were retransmitted if they are sent
unreliable but not abandoned yet.
With the help of: Michael Teuxen and Peter Lei :-)
MFC after: 4 weeks
an unclean shutdown would make it impossible to mount rootfs at boot.
PR: kern/128529
Reviewed by: pjd
Approved by: rwatson (mentor)
Sponsored by: FreeBSD Foundation
do not need any locking. Opening and closing translators is serialized
using an sx lock.
Note: This depends on the earlier fix to kern_module.c to properly order
MOD_UNLOAD events.
MFC after: 2 months
memory barriers on i386. It works as a serialization instruction on
all IA32 CPUs.
Alternative solution of using {s,l,}fence requires run-time checking
of the presense of the corresponding SSE or SSE2 extensions, and
possible boot-time patching of the kernel text.
Suggested by: many
parent threads sleep on the parent' struct proc until corresponding
child releases the vmspace. Each sleep is interlocked with proc mutex of
the child, that triggers assertion in the sleepq_add(). The assertion
requires that at any time, all simultaneous sleepers for the channel use
the same interlock.
Silent the assertion by using conditional variable allocated in the
child. Broadcast the variable event on exec() and exit().
Since struct proc * sleep wait channel is overloaded for several
unrelated events, I was unable to remove wakeups from the places where
cv_broadcast() is added, except exec().
Reported and tested by: ganbold
Suggested and reviewed by: jhb
MFC after: 2 week
move that module to the head of the associated linker file's list of modules.
The end result is that once all the modules are loaded, they are sorted in
the reverse of their load order. This causes the kernel linker to invoke
the MOD_QUIESCE and MOD_UNLOAD events in the reverse of the order that
MOD_LOAD was invoked. This means that the ordering of MOD_LOAD events that
is set by the SI_* paramters to DECLARE_MODULE() are now honored in the same
order they would be for SYSUNINIT() for the MOD_QUIESCE and MOD_UNLOAD
events.
MFC after: 1 month
unloading any modules. As a result, if any module veto's an unload
request via MOD_QUIESCE, the entire set of modules for that linker
file will remain loaded and active now rather than leaving the kld
in a weird state where some modules are loaded and some are unloaded.
- This also moves the logic for handling the "forced" unload flag out of
kern_module.c and into kern_linker.c which is a bit cleaner.
- Add a module_name() routine that returns the name of a module and use that
instead of printing pointer values in debug messages when a module fails
MOD_QUIESCE or MOD_UNLOAD.
MFC after: 1 month
interrupt code to be more robust. I've been running these changes for
over a year... With these changes, I don't see the ath card going
into reset like the code in the tree.
packet loss, of between 10-30%. The fix is to put the PHY into
and take it out of local loopback mode when resetting the interface.
Obtained from: Chelsio Inc.
MFC after: 3 days
o Chip full mask revision 2 or later controllers have to
set correct Tx MAC and Tx offload clock depending on negotiated
link speed.
o JMC260 chip full mask revision 2 has a silicon bug that can't
handle 64bit DMA addressing. Add workaround to the bug by
limiting DMA address space to be within 32bit.
o Valid FIFO space of receive control and status register was
changed on chip full mask revision 2 or later controllers. For
these controllers, use default 16QW as it's supposed to be the
safest value for maximum PCIe compatibility. JMicron confirmed
performance will not be reduced even if the FIFO space is set
to 16QW.
o When interface is put into suspend/shutdown state, remove Tx MAC
and Tx offload clock to save more power. We don't need Tx clock
at all in this state.
o Added new register definition for chip full mask revision 2 or
later controllers.
Thanks to JMicron for their continuous support of FreeBSD.
change. As a side effect, this makes the excessive interrupts to
disappear which has been observed as a regression in recent stable/7.
Reported by: many (on -stable@)
Reviewed by: davidch
validation code on ZFS.
Problem: when opening file with O_CREAT|O_EXCL NFS has to jump through
extra hoops to ensure O_EXCL semantics. Namely, client supplies of 8
bytes (NFSX_V3CREATEVERF) bytes of verification data to uniquely
identify this create request. Server then creates a new file with access
mode 0, copies received 8 bytes into va_atime member of struct vattr and
attempt to set the atime on file using VOP_SETATTR. If that succeeds, it
fetches file attributes with VOP_GETATTR and verifies that atime
timestamps match. If timestamps do not match, NFS server concludes it
has probbaly lost the race to another process creating the file with the
same name and bails with EEXIST.
This scheme works OK when exported FS is FFS, but if underlying
filesystem is ZFS _and_ server is running 64bit kernel, it breaks down
due to sanity checking in zfs_setattr function, which refuses to accept
any timestamps which have tv_sec that cannot be represented as 32bit
int. Since struct timespec fields are 64 bit integers on 64bit platforms
and server just copies NFSX_V3CREATEVERF bytes info va_atime, all eight
bytes supplied by client end up in va_atime.tv_sec, forcing it out of
valid 32bit range.
The solution this change implements is simple: it treats
NFSX_V3CREATEVERF as two 32bit integers and unpacks them separately into
va_atime.tv_sec and va_atime.tv_nsec respectively, thus guaranteeing
that tv_sec remains in 32 bit range and ZFS remains happy.
Reviewed by: kib
Close subtle but relatively unlikely race conditions when
propagating the vnode write error to other active sessions
tracing to the same vnode, without holding a reference on
the vnode anymore. [2]
PR: kern/126368 [1]
Submitted by: rwatson [2]
Reviewed by: kib, rwatson
MFC after: 4 weeks
boot0.S changes:
+ import a patch from Christoph Mallon to rearrange the various
print functions and save another couple of bytes;
+ implement the suggestion in PR 70531 to enable booting from
any valid partition because even the extended partitions that
were previously in our kill list may contain a valid boot loader.
This simplifies the code and saves some bytes;
+ followwing up PR 127764, implement conditional code to preserve
the 'Volume ID' which might be used by other OS (NT, XP, Vista)
and is located at offset 0x1b8. This requires a relocation of the
parameter block within the boot sector -- there is no other
possible workaround.
To address this, boot0cfg has been updated to handle both
versions of the boot code;
+ slightly rearrange the strings printed in the menus to make
the code buildable with all options. Given the tight memory
budget, this means that with certain options we need to
shrink or remove certain labels.
and especially:
make -DVOLUME_LABEL -DPXE the default options.
This means that the newly built boot0 block will preserve the
Volume ID, and has the (hidden) option F6 to boot from INT18/PXE.
I think the extra functionality is well worth the change.
The most visible difference here is that the 'Default: ' string
now becomes 'Boot: ' (it can be reverted to the old value
but then we need to nuke 1/2 partition name or entries to
make up for the extra room).
boot0cfg changes:
+ modify the code to recognise the new boot0 structure (with the
relocated options block to make room for the Volume id).
+ add two options, '-i xxxx-xxxx' to set the volume ID, -e c
to modify the character printed in case of bad input
PR: 127764 70531
Submitted by: Christoph Mallon (portions)
MFC after: 4 weeks
contrib/openbsm (svn merge) and sys/{bsm,security/audit} (manual merge).
- Add OpenBSM contrib tree to include paths for audit(8) and auditd(8).
- Merge support for new tokens, fixes to existing token generation to
audit_bsm_token.c.
- Synchronize bsm includes and definitions.
OpenBSM history for imported revisions below for reference.
MFC after: 1 month
Sponsored by: Apple Inc.
Obtained from: TrustedBSD Project
--
OpenBSM 1.1 alpha 2
- Include files in OpenBSM are now broken out into two parts: library builds
required solely for user space, and system includes, which may also be
required for use in the kernels of systems integrating OpenBSM. Submitted
by Stacey Son.
- Configure option --with-native-includes allows forcing the use of native
include for system includes, rather than the versions bundled with OpenBSM.
This is intended specifically for platforms that ship OpenBSM, have adapted
versions of the system includes in a kernel source tree, and will use the
OpenBSM build infrastructure with an unmodified OpenBSM distribution,
allowing the customized system includes to be used with the OpenBSM build.
Submitted by Stacey Son.
- Various strcpy()'s/strcat()'s have been changed to strlcpy()'s/strlcat()'s
or asprintf(). Added compat/strlcpy.h for Linux.
- Remove compatibility defines for old Darwin token constant names; now only
BSM token names are provided and used.
- Add support for extended header tokens, which contain space for information
on the host generating the record.
- Add support for setting extended host information in the kernel, which is
used for setting host information in extended header tokens. The
audit_control file now supports a "host" parameter which can be used by
auditd to set the information; if not present, the kernel parameters won't
be set and auditd uses unextended headers for records that it generates.
OpenBSM 1.1 alpha 1
- Add option to auditreduce(1) which allows users to invert sense of
matching, such that BSM records that do not match, are selected.
- Fix bug in audit_write() where we commit an incomplete record in the
event there is an error writing the subject token. This was submitted
by Diego Giagio.
- Build support for Mac OS X 10.5.1 submitted by Eric Hall.
- Fix a bug which resulted in host XML attributes not being arguments so
that const strings can be passed as arguments to tokens. This patch was
submitted by Xin LI.
- Modify the -m option so users can select more then one audit event.
- For Mac OS X, added Mach IPC support for audit trigger messages.
- Fixed a bug in getacna() which resulted in a locking problem on Mac OS X.
- Added LOG_PERROR flag to openlog when -d option is used with auditd.
- AUE events added for Mac OS X Leopard system calls.
directly include only the header files needed. This reduces the
unneeded spamming of various headers into lots of files.
For now, this leaves us with very few modules including vnet.h
and thus needing to depend on opt_route.h.
Reviewed by: brooks, gnn, des, zec, imp
Sponsored by: The FreeBSD Foundation
Sgtty is a programming interface that has been replaced by termios over
the years. In June we already removed <sgtty.h>, which exposes the
ioctl()'s that are implemented by this interface. The importance of this
flag is overrated right now.
when it sees only received packets. In some cases where a device only
recieves data it mistakenly thinks that its transmitting side is broken
and resets the device.
Obtained from: Chelsio Inc.
MFC after: 3 days
of the boot0.S code, with a number of compile-time selectable options,
the most interesting one being the ability to select PXE booting.
The code is completely compatible with the previous one, and with
the boot0cfg program. Even the actual code is largely unmodified,
with only minor rearrangements or fixes to make room for the new
features.
The behaviour of the standard build differs from the previous
version in the following, minor things:
+ 'noupdate' is the default, which means the code does not
write back the selection to disk. You can enable the feature
at runtime with boot0cfg, or changing the flags in the Makefile.
+ a drive number of 0x00 (floppy, or USB in floppy emulation) is
now accepted as valid. Previously, it was overridden with 0x80,
meaning that the partition table coming from the media was
used to access sectors on a possibly different media.
You can revert to the previous mode building with -DCHECK_DRIVE,
and you can always use the 'setdrv' option in boot0cfg
+ certain FAT or NTFS partitions are listed as WIN instead of DOS.
+ the 'bel' character on a bad selection is replaced by a '#' to
make it clear that the system is not hang even if the machine
does not have a speaker. This can be reverted back at compile
time, or at runtime with an upcoming boot0cfg option.
Additional features are available as compile time options,
and may be become the default if deemed useful. In particular:
+ INT18/PXE boot (make -DPXE)
This option enables booting through INT 18h (which on certain
BIOSes can be hooked to PXE) by pressing F6. There is unfortunately
no room to print the additional menu option.
Also, to make room for the code, the 'Default: ' string is
changed to 'Boot: '
+ print current drive number (make -DTEST)
Prints a line indicating the current drive number.
This is useful to figure out what is going on for machines/bioses
which remap drives in sometimes surprising ways.
+ disable numeric keys in console mode (make -DONLY_F_KEYS)
Not really a significant option, but it is needed to make
room for the -DTEST mode.
+ disable floppy support (make -DCHECK_DRIVE)
Revert to the old behaviour of only accepting 0x80 and above
as valid drive numbers.
MFC after: 6 weeks
entries for one name. Then, creating inode with that name would remove
one entry, leaving others dormant. Reclaiming the vnode would uncover
negative entries, causing false return of ENOENT from the calls like
stat, that do not create inode.
Prevent creation of the duplicated negative entries.
Reported and debugged with: pho
Reviewed by: jhb
X-MFC: after shared lookup changes
hardware for PMCs that have been configured for sampling.
- Bug fix: acknowledge PMC hardware overflows irrespective of the
the (software) PMC's state.
- break complex conditionals in to multiple lines to avoid wrapping
- remove copious unused debug statements
- be more aggressive about cleaning in the calling thread
- eliminate usage of ENOSPC
- increase number of iterations that cxgbsp can do
- eliminate "initerr" usage to simplify ENOBUFS handling
- when coalescing pass all packets to BPF
- always set overrun if hardware queue is full
This changes struct kinfo_filedesc and kinfo_vmentry such that they are
same on both 32 and 64 bit platforms like i386/amd64 and won't require
sysctl wrapping.
Two new OIDs are assigned. The old ones are available under
COMPAT_FREEBSD7 - but it isn't that simple. The superceded interface
was never actually released on 7.x.
The other main change is to pack the data passed to userland via the
sysctl. kf_structsize and kve_structsize are reduced for the copyout.
If you have a process with 100,000+ sockets open, the unpacked records
require a 132MB+ copyout. With packing, it is "only" ~35MB. (Still
seriously unpleasant, but not quite as devastating). A similar problem
exists for the vmentry structure - have lots and lots of shared libraries
and small mmaps and its copyout gets expensive too.
My immediate problem is valgrind. It traditionally achieves this
functionality by parsing procfs output, in a packed format. Secondly, when
tracing 32 bit binaries on amd64 under valgrind, it uses a cross compiled
32 bit binary which ran directly into the differing data structures in 32
vs 64 bit mode. (valgrind uses this to track file descriptor operations
and this therefore affected every single 32 bit binary)
I've added two utility functions to libutil to unpack the structures into
a fixed record length and to make it a little more convenient to use.
offload for VLAN frames are also supported. The VLAN hardware
assistance is available only on 82550/82551 based controllers.
While I'm here change the confusing name of bit1 in byte 22 of
configuration block to vlan_drop_en. The bit controls whether
hardware strips VLAN tagged frame or not. Special thanks to wpaul
who sent valuable VLAN related information to me.
Tested on: i386, sparc64
events. Just reading PMDR register was not enough to have fxp(4)
immuninize against received magic packets during system boot.
Tested by: Alexey Shuvaev < shuvaev <> physik DOT uni-wuerzburg DOT de >
exact multiple of system page size should still be allowed to be mapped
in their entirety to match the regular vnode backed file behavior.
Reported by: ed
Reviewed by: jhb
module; the ath module now brings in the hal support. Kernel
config files are almost backwards compatible; supplying
device ath_hal
gives you the same chip support that the binary hal did but you
must also include
options AH_SUPPORT_AR5416
to enable the extended format descriptors used by 11n parts.
It is now possible to control the chip support included in a
build by specifying exactly which chips are to be supported
in the config file; consult ath_hal(4) for information.
contents.
- It is possible to override the dynamic configuration by using
AT91C_MAIN_CLOCK option in kernel config.
PR: arm/128961 (based on)
Submitted by: Bjorn Konig <bkoenig@alpha-tierchen.de>
Reviewed by: imp
Approved by: kib (mentor, implicit)
by getaudit(2). Some applications such has su, id will interpret E2BIG as
requiring the use of getaudit_addr(2) to pull extended audit state (ip6)
from the kernel.
This change un-breaks the ABI when auditing has been activated on a system
and the users are logged in via ip6.
This is a RELENG_7_1 candidate.
MFC after: 1 day
Discussed with: rwatson
o eliminate private state indexed by 802.11 rate codes; use the hal's
rate tables directly to get the same info
o calculate a mask of operational rates to optimize lookups and checks
(instead of using for loops and similar)
o optimize size bin operations
o ignore rates marked as "do not use" in the hal phy tables
o fix bug that caused upshifting to break in 11g once the rate dropped
below 11Mb/s
o add more intelligent multi-rate tx schedules
o add support for 1/2 and 1/4 width channels
o add dev.ath.X.sample_stats sysctl to dump runtime statistics to the console
(needs to go up to a user app)
o export more tuning knobs via sysctls (still a couple of magic constants)
necessary workarounds, add code to detect these hangs and distinguish
them from other events; note this code is only invoked for anomalous
conditions and (at the moment) is a noop because the hang detection
code is in a new hal that's coming shortly
Volume 3B: System Programming Guide, Part 2", CPUs with family 0x6 and model
above or 0xE and CPUs with family 0xF and model above or 0x3 have invariant
TSC.
Volume 3B: System Programming Guide, Part 2", CPUs with family 0x6 and model
above or 0xE and CPUs with family 0xF and model above or 0x3 have invariant
TSC.
Change types used in the linux' struct msghdr and struct cmsghdr
definitions to the properly-sized architecture-specific types.
Move ancillary data handler from linux_sendit() to linux_sendmsg().
Submitted by: dchagin
Add a custom version of copyiniov() to deal with the 32-bit iovec
pointers from userland (to be used later).
Adjust prototypes for linux_readv() and linux_writev() to use new
l_iovec32 definition and to match actual linux code. In particular,
use ulong for fd (why ?).
Submitted by: dchagin
Bring in updated jail support from bz_jail branch.
This enhances the current jail implementation to permit multiple
addresses per jail. In addtion to IPv4, IPv6 is supported as well.
Due to updated checks it is even possible to have jails without
an IP address at all, which basically gives one a chroot with
restricted process view, no networking,..
SCTP support was updated and supports IPv6 in jails as well.
Cpuset support permits jails to be bound to specific processor
sets after creation.
Jails can have an unrestricted (no duplicate protection, etc.) name
in addition to the hostname. The jail name cannot be changed from
within a jail and is considered to be used for management purposes
or as audit-token in the future.
DDB 'show jails' command was added to aid debugging.
Proper compat support permits 32bit jail binaries to be used on 64bit
systems to manage jails. Also backward compatibility was preserved where
possible: for jail v1 syscalls, as well as with user space management
utilities.
Both jail as well as prison version were updated for the new features.
A gap was intentionally left as the intermediate versions had been
used by various patches floating around the last years.
Bump __FreeBSD_version for the afore mentioned and in kernel changes.
Special thanks to:
- Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches
and Olivier Houchard (cognet) for initial single-IPv6 patches.
- Jeff Roberson (jeff) and Randall Stewart (rrs) for their
help, ideas and review on cpuset and SCTP support.
- Robert Watson (rwatson) for lots and lots of help, discussions,
suggestions and review of most of the patch at various stages.
- John Baldwin (jhb) for his help.
- Simon L. Nielsen (simon) as early adopter testing changes
on cluster machines as well as all the testers and people
who provided feedback the last months on freebsd-jail and
other channels.
- My employer, CK Software GmbH, for the support so I could work on this.
Reviewed by: (see above)
MFC after: 3 months (this is just so that I get the mail)
X-MFC Before: 7.2-RELEASE if possible
to the fs, but before a vnode on the fs is locked, unmount may free fs
structures, causing access to destroyed data and freed memory.
Introduce a vfs_busymp() function that looks up and busies found
fs while mountlist_mtx is held. Use it in nfsrv_fhtovp() and in the
implementation of the handle syscalls.
Two other uses of the vfs_getvfs() in the vfs_subr.c, namely in
sysctl_vfs_ctl and vfs_getnewfsid seems to be ok. In particular,
sysctl_vfs_ctl is protected by Giant by being a non-sleeping sysctl
handler, that prevents Giant-locked unmount code to interfere with it.
Noted by: tegge
Reviewed by: dfr
Tested by: pho
MFC after: 1 month
- Print flags in hex.
- Note that flags can be fine and panic can be due unexpected error condition.
- Remove redundant new line character.
Eventhough panic message excess 80 characters keep it in one line so it is
easier to grep.
In file included from /src/sys/modules/powermac_nvram/../../dev/powermac_nvram/powermac_nvram.c:38:
@/dev/ofw/ofw_bus.h:36:24: error: ofw_bus_if.h: No such file or directory
I am not sure for how long this had not worked and if it was just the
latest vimage commit that had revealed this or if nobody had built
universe successfully in a while. Btw, the tinderbox did not complain
either so that is probably the reason noone had noticed.
underneath #ifdef VIMAGE blocks.
This change introduces some churn in #include ordering and nesting
throughout the network stack and drivers but is not expected to cause
any additional issues.
In the next step this will allow us to instantiate the virtualization
container structures and switch from using global variables to their
"containerized" counterparts.
Reviewed by: bz, julian
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
The mqfs_search() routine uses strncmp() to match message queue objects
by name. This is because it can be called from environments where the
file name is not null terminated (the VFS for example).
Unfortunately it doesn't compare the lengths of the message queue names,
which means if a system has "Queue12345", the name "Queue" will also
match.
I noticed this when a student of mine handed in an exercise using
message queues with names "Queue2" and "Queue".
Reviewed by: rink
IPv6 socket by comparing a constant inp vflag.
This is expected to help to reduce extra locking.
Suggested by: rwatson
Reviewed by: rwatson
MFC after: 6 weeks
IPsec change in r185366 only differed in two additonal IPv6 lines.
Rather than splattering conditional code everywhere add the v6
check centrally at this single place.
Reviewed by: rwatson (as part of a larger changset)
MFC after: 6 weeks (*)
(*) possibly need to leave a stub wrapper in 7 to keep the symbol.
Ignoring different names because of macros (in6pcb, in6p_sp) and
inp vs. in6p variable name both functions were entirely identical.
Reviewed by: rwatson (as part of a larger changeset)
MFC after: 6 weeks (*)
(*) possibly need to leave a stub wrappers in 7 to keep the symbols.
and Core Duo), models 0xF (Core2), model 0x17 (Core2Extreme) and
model 0x1C (Atom).
In these CPUs, the actual numbers, kinds and widths of PMCs present
need to queried at run time. Support for specific "architectural"
events also needs to be queried at run time.
Model 0xE CPUs support programmable PMCs, subsequent CPUs
additionally support "fixed-function" counters.
- Use event names that are close to vendor documentation, taking in
account that:
- events with identical semantics on two or more CPUs in this family
can have differing names in vendor documentation,
- identical vendor event names may map to differing events across
CPUs,
- each type of CPU supports a different subset of measurable
events.
Fixed-function and programmable counters both use the same vendor
names for events. The use of a class name prefix ("iaf-" or
"iap-" respectively) permits these to be distinguished.
- In libpmc, refactor pmc_name_of_event() into a public interface
and an internal helper function, for use by log handling code.
- Minor code tweaks: staticize a global, freshen a few comments.
Tested by: gnn
controllers. ICH based controllers are treated as 82559. 82557,
earlier revision of 82558 and 82559ER have no WOL capability.
o WOL support requires help of a firmware so add check whether
hardware is capable of handling magic frames by reading EEPROM.
o Enable accepting WOL frames only when hardware is about to
suspend or shutdown. Previously fxp(4) used to allow receipt of
magic frame under normal operation mode which could cause
hardware hang if magic frame is received by hardware. Datasheet
clearly states driver should not allow WOL frames under normal
operation mode.
o Disable WOL frame reception in device attach so have fxp(4)
immunize against system hang which can be triggered by magic
packets when the hardware is not in fully initialized state.
o Don't reset all hardware configuration data in fxp_stop()
otherwise important configuration data is lost and this would
reset WOL configuration to default state which in turn cause
hardware hang on receipt of magic frames. To fix the issue,
preserve hardware configuration data by issuing a selective
reset.
o Explicitly disable interrupts after issuing selective reset as
reset may unmask interrupts.
Tested by: Alexey Shuvaev < shuvaev <> physik DOT uni-wuerzburg DOT de >
will sometimes fail to initialize problem due to a lock
contention with management hardware. However, in order to
deliver that fix it was necessary to take a shared code
update as a whole, and this required scattered changes in
the core code to be compatible.
The em driver now has VLAN HW support added as the igb
driver had previously.
MFC after: ASAP - in time for 7.1 RELEASE
-This version has header split, and as a result a number of
aspects of the code have been improved/simplified.
- Interrupt handling refined for performance
- Many small bugs fixed along the way
MFC after: ASAP - in time for 7.1
whitespace) macros from p4/vimage branch.
Do a better job at enclosing all instantiations of globals
scheduled for virtualization in #ifdef VIMAGE_GLOBALS blocks.
De-virtualize and mark as const saorder_state_alive and
saorder_state_any arrays from ipsec code, given that they are never
updated at runtime, so virtualizing them would be pointless.
Reviewed by: bz, julian
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
instead of "puts" which prints whatever is at %si, followed by a CRLF.
It was not noticed during tests because at that point %si points
to a partition entry whose first byte is 0x80, which is both a
terminator for the string and a non printable character.
Submitted by: Christoph Mallon
as in_pcbdetach() and we don't need the code twice.
Reviewed by: rwatson
MFC after: 6 weeks (*)
(*) possibly need to leave a stub wrapper in 7 to keep the symbol.
boot code. The bug was introduced in rev.1.13, and went unnoticed
because FreeBSD's boot1 does not use it, but other systems might.
(I have been struggling for almost a full day trying to figure out
why a syslinux'ed partition would not boot when started with the
FreeBSD /boot/boot0, only to realize that the bug was ours!)
The space for the two extra bytes (push %si and pop %si) is reclaimed
by removing an extra CRLF that is printed before booting.
The bug is not a major one but if there is time it might be a good
thing to merge it into the upcoming releases.
- Bugfix: Don't excede static number of ports allowed when iterating
over endpoints within an interface.
- u3g_speeds contains speeds in baud, not bytes per second, so divide
the buffer size by 10.
throttle. My SMP kernel hangs when one of those is selected by
powerd. Errata AA21 here:
ftp://download.intel.com/design/PentiumXE/specupdt/31030717.pdf
MFC after: 2 weeks
o Configure controller to use dynamic TBD as TSO requires that
operation mode.
o Add a dummy TBD to tx_cb_u as TSO can access one more TBD in TSO
operation.
o Increase a DMA segment size to 4096 to hold a full IP segment
with link layer header.
o Unlike other TSO capable controllers, 82550/82551 does not
modify the first IP packet in TSO operation so driver should
create an IP packet with proper header. Subsequent IP packets
are generated from the header information in the first IP packet
header. Likewise pseudo checksum also should be computed by
driver for the first packet.
o TSO requires one more TBD to hold total TCP payload. To make
code simple for TSO/non-TSO case, increase the index of the
first available TBD array.
o Remove KASSERT that checks the size of a DMA segment should be
less than or equal to MCLBYTES as it's no longer valid in TSO.
o Tx threshold and number of TBDs field is used to store MSS in
TSO. So don't set the Tx threshold in TSO case.
82559 or later controllers added simple checksum calculation logic
in RU. For backward compatibility the computed checksum is appended
at the end of the data posted to Rx buffer. This type of simple
checksum calculation support had been used on several vendors such
as Sun HME/GEM, SysKonnect GENESIS and Marvell Yukon controllers.
Because this type of checksum offload support requires parsing of
received frame and pseudo checksum calculation with software
routine it still consumes more CPU cycles than that of full-fledged
checksum offload controller. But it's still better than software
checksum calculation.
Rx buffer and loads DMA map. Also add a function
fxp_discard_rfabuf that handles reusing Rx buffer/DMA map. With
this change fxp_add_rfabuf just handles appending a new RFA to
existing chain.
o Initialize mbuf length in fxp_new_rfabuf.
o Don't reset rnr and have fxp(4) handle received frames even if
it couldn't allocate new Rx buffer. This will make fxp(4) reload
updated RFA under rnr case. The rnr would still be reset to 0 if
polling is active and fxp(4) processed number of allowed Rx
events.
o Update if_iqdrops if fxp(4) couldn't allocate Rx buffer.
Previously fxp(4) used to try to reuse Rx buffer when new buffer
allocation is failed. But fxp(4) didn't take into account loaded
DMA map such that the same DMA map was loaded again without
unloading the map. There is no reason to unload the loaded map and
reload the same map again, just reusing the map is enough. I
believe the spare DMA map in softc was introduced to implement this
behaviour. Also fxp(4) used to stop Rx processing if once Rx buffer
allocation or DMA map load fails which in turn resulted in losing
incoming frames under heavy network load. With this change fxp(4)
should survive from resource shortage condition.
practice, but it is a good programming practice and allows the kernel to not
depend on userland correctness.
- While there, make sizeof usage match the rest of the code.
Found with: Coverity Prevent(tm)
CID: 660, 662
practice, but it is a good programming practice nontheless and it allows the
kernel to not depend on userland correctness.
Found with: Coverity Prevent(tm)
CID: 655-659, 664-667
o Copy kb920x_machdep.c to at91_machdep.c
o Move board_init to new board_kb920x.c
o rename ramsize to at91_ramsize and make it accessible to board_* files.
o Delete files.kb920x. We can do this selection with the new boards.
o Add a stub for the tsc4370 board init, which will be added in
a future commit.
o Add new 'devices' at91_board_kb920x and at91_board_tsc4370. More are
needed and will be added in future commits.
Reviewed by: stass, cognet
advance of teaching vn_fullpath1() how to query file systems for
vnode-to-name mappings when cache lookups fail.
Thanks to kib for guidance and patience on this process.
Reviewed by: kib
Approved by: kib
Fix some issues about re-scanning of the devices.
src/lib/libusb20/libusb20_ugen20.c
Fix issue about libusb20 having to release the
USB transfers before doing a SET_CONFIG, else
the kernel will kill the file handle.
src/sys/dev/usb2/core/usb2_device.
src/sys/dev/usb2/core/usb2_generic.c
src/sys/dev/usb2/core/usb2_generic.h
Add support for U3G devices.
Improve and cleanup FIFO free handling.
Improve device re-enumeration.
src/sys/dev/usb2/core/usb2_msctest.c
src/sys/dev/usb2/core/usb2_msctest.h
Fix some problems in the USB Mass Storage Test.
Add Huawei vendor specific quirks.
src/sys/dev/usb2/core/usb2_request.c
Improve device re-enumeration.
src/sys/dev/usb2/ethernet/if_aue2.c
src/sys/dev/usb2/include/usb2_devid.h
src/sys/dev/usb2/include/usb2_devtable.h
src/sys/dev/usb2/quirk/usb2_quirk.c
Integrate changes from the old USB driver.
src/sys/dev/usb2/include/usb2_standard.h
Add definition of USB3.0 structures from USB.org.
src/sys/dev/usb2/serial/u3g2.c
src/sys/dev/usb2/serial/ugensa2.c
src/sys/modules/usb2/Makefile
src/sys/modules/usb2/serial_3g/Makefile
Import U3G driver.
Submitted by: Hans Petter Selasky (usb4bsd)
many bugs fixes, many more performance improvements.
Submitted by: Danny Braniss
M sbin/iscontrol/iscsi.conf.5
M sbin/iscontrol/iscontrol.8
M sbin/iscontrol/iscontrol.h
M sbin/iscontrol/config.c
M sbin/iscontrol/fsm.c
M sbin/iscontrol/login.c
M sbin/iscontrol/pdu.c
M sbin/iscontrol/misc.c
M sbin/iscontrol/auth_subr.c
M sbin/iscontrol/iscontrol.c
M sys/dev/iscsi/initiator/isc_cam.c
M sys/dev/iscsi/initiator/iscsi.h
M sys/dev/iscsi/initiator/isc_soc.c
M sys/dev/iscsi/initiator/iscsi_subr.c
M sys/dev/iscsi/initiator/iscsivar.h
M sys/dev/iscsi/initiator/isc_subr.c
M sys/dev/iscsi/initiator/iscsi.c
M sys/dev/iscsi/initiator/isc_sm.c
IFF_DRV_OACTIVE to note resource shortage to upper stack.
- Don't count number of mbuf chains. Default 32 DMA segments for a
frame is enough for most cases. If bus_dmamap_mbuf_sg fails use
m_collapse(9) to collapse the mbuf chain instead of relying on
expensive m_defrag(9).
- Move bpf handling to fxp_start_body() which is supposed to be
more appropriate place.
- Always arm watchdog timer whenever a new Tx request is made.
Previously fxp(4) used to arm watchdog timer only when
FXP_CXINT_THRESH-th Tx request is made. Because fxp(4) does not
rely on Tx interrupt to reclaim transmitted mbufs it's better to
arm watchdog timer to detect potential lockups.
- Add more aggresive Tx buffer reclaiming in fxp_start_body to make
room for new Tx requests. Since fxp(4) does not request Tx
completion interrupt for every frames it's necessary to clean
TXCBs in advance to saturate link.
- Make fxp(4) try to start more packets transmitting regardless of
interrupt type in fxp_intr_body.
patch the RX/TX performance becomes about 17~18 Mbps comparing with
the previous whose values were RX 7~8Mbps and TX 13~14Mbps.
- improve AL2230 RF handling in zd1211b
- support AL2230S RF that PV2000 is renamed to AL2230S
- use register ZYD_CR244, ZYD_CR243, ZYD_CR242 when the driver writes
values on RF. This routine is more faster than the original one
- use private TX lock to avoid LOR at zyd_raw_xmit()
- increase TX slots from 1 to 5
- needs to set the channel at IEEE80211_S_AUTH not IEEE80211_S_RUN
- detailed error handling. In previous the next command was sent to the
device even if there was errors
- setting ZYD_MAC_RX_THRESHOLD value should be different between 1211
and 1211b
- only try to stop the device at zyd_init_locked() if the device is
UPed
- do not use MTX_RECURSE
- do not try to grap Giant lock when the channel is changing
- move the device initialization routines from zyd_attach to zyd_init to
give a device full-reset chance to the driver.
- code cleanup at zyd_raw_xmit()
- simplify zyd_attach() routines
- resort functions and clean up variables
- DPRINTF style change.
- style(9)
Reviewed by: sam
check to fxp_txeof(). While I'm here unarm watchdog timer only if
there are no pending queued Tx requests.
Previously the watchdog timer was unarmed whenever Tx interrupt is
raised. This could be resulted in hiding root cause of watchdog
timeouts.
checksum offload configuration. Now checksum offload can be
controlled by ifconfig(8).
While I'm here add an additional check for interface capabilities
before applying user's request.
configured, change the message to let people know this is a
possibility. I've slightly changed the message from the one
submitted by Pekka to keep the printf on one line.
Submitted by: Pekka Savola <pekkas@netcore.fi>
the comparison between c and val and then compare val to _POSIX_VDISABLE.
This avoids comparing c (which is usually of type char) to
_POSIX_VDISABLE (which has value 0xff and may not be representable
as a char).
Reviewed by: ed
nodes capabilities. Add "Analog"/"Digital" marks to the pcm device names.
I hope it will help new users easier accept concept of several PCM devices
and understand exact purposes of that devices.
mnt_lock is before lock of any vnode on the mp, it uses LK_NOWAIT. Since
MNTK_UNMOUNT may be transient, pdp lock is dropped when vfs_busy()
failed, and operation is retried after some time. This way, ffs_vget()
is not called on the mp that may be in the process of being destroyed by
unmount.
Check for the VI_DOOMED flag on pdp after its lock is reacquired, to
better detect some situations where directory containing ".."
entry is removed during the lookup.
Reviewed by: tegge, attilio (previous version)
Tested by: pho
MFC after: 1 month
of the ABI of the currently executing image. Change some places to test
the flags instead of explicit comparing with address of known sysentvec
structures to determine ABI features.
Discussed with: dchagin, imp, jhb, peter
- invert sense of hw.cxgb.singleq tunable to hw.cxgb.multiq
- don't wake up transmitting thread by default
- add per tx queue ifaltq to handle ALTQ
- remove several unused functions in cxgb_multiq.c
- add several sysctls: multiq_tx_enable, coalesce_tx_enable,
and wakeup_tx_thread
- this obsoletes the hw.cxgb.snd_queue_len as ifq is replaced
by a buf_ring
and ifnet functions
- add memory barriers to <machine/atomic.h>
- update drivers to only conditionally define their own
- add lockless producer / consumer ring buffer
- remove ring buffer implementation from cxgb and update its callers
- add if_transmit(struct ifnet *ifp, struct mbuf *m) to ifnet to
allow drivers to efficiently manage multiple hardware queues
(i.e. not serialize all packets through one ifq)
- expose if_qflush to allow drivers to flush any driver managed queues
This work was supported by Bitgravity Inc. and Chelsio Inc.
1) Fix a bug in dealing with the Alerus 1006 PHY which prevented the
device from ever coming back up once it had been set to down.
2) Add a kernel tunable (hw.cxgb.snd_queue_len) which makes it possible
to give the device more than IFQ_MAXLEN entries in its send queue. The
default remains 50.
3) Add code to place the card'd identification and serial number into
its description (%desc) so that users can tell which card they have
installed.
and XMITS has to be basically done in the same manner as for
the Sabres, i.e. only for devices behind PCI-PCI-bridges and
after a PIO read on the far side of the farest PCI-PCI-bridge.
Given that the Tomatillo documentation mentions no difference
to the Schizo bridges in this regard and this is also still
part of the procedure described Schizo documentation this
seems about right so adjust accordingly (the unconditional
CDMA flushing/syncing previously done was based on how Linux
behaves).
- Implement CDMA flushing/syncing for Schizo version >= 5,
which requires the workaround described in Schizo Errata I-23.
According to Schizo Errata I-13 it's just unusable with
version < 5 though. [1]
- Don't register the Schizo streaming buffer for now until it's
usage is sorted out according to the erratas.
- Register our interrupt filters with the revived INTR_FAST so
they these interrupts can even interrupt filters of device
drivers as necessary.
- Remove the comment regarding lack of newbus'ified bus_dma(9)
as being able to associate a DMA tag with a device would
allow to implement CDMA flushing/syncing in bus_dmamap_sync(9)
but that would totally kill performance. Given that for devices
not behind a PCI-PCI bridge the host-to-PCI bridges also only
do CDMA flushing/syncing based on interrupts there's no
additional disadvantage for polling(4) callbacks in the case
schizo(4) has to do the CDMA flushing/syncing but rather a
general problem.
Reported by: Michael Moll [1]
above) exhibits some misbehaviours on machines with AMD64 CPUs,
which at least in some cases I have tracked down to a heap overflow.
It is unclear whether it depends on the CPU or on the pxe bios
itself which may use more memory on AMD machines.
Noticeably a pxeboot compiled from 6.x sources works fine on all
machines I have tried so far, while a pxeboot compiled from 7.x
sources does not.
This patch is a first step in reducing the amount of memory used
while processing the configuration files read by the loader at boot
(some of them are quite large, 1700+ lines), and it does so by:
+ moving a buffer to static memory instead of allocating in the heap;
+ skipping empty lines;
+ reducing the amount of memory used for line descriptors;
Unfortunately there are several changes between 6.x and above,
affecting the compiler, the loader code itself, and libstand,
and it is not so straightforward to
These changes fix the behaviour on one motherboard with a
single-core AMD cpu, but are still not enough e.g on an Asus
M2N-VM (with a dual-core CPU).
I need to investigate the problem a bit more before figuring
out what should be committed to RELENG_7
PR: kern/118222
filters instead of PIL_FAST and allow special filters and handlers
for interrupts which need to be able to interrupt even filters, f.e.
bus error interrupts, to be registered with the revived INTR_FAST
at PIL_FAST.
and output, set BUS_DMA_COHERENT when creating the DMA map used for
loading the buffer. As a side-effect this solves locking issues on
sparc64 when dcons(4) calls bus_dmamap_sync(9) while in an interrupt
filter, which are executed in a critical section, and iommu(4) has
to use a sleep lock when taking advantage of the streaming buffer.
Reported and tested by: kensmith
Approved by: simokawa
For some reason the nmdm(4) driver doesn't use CALLOUT_MPSAFE, even
though we live in the MPSAFE TTY era. Add the CALLOUT_MPSAFE flags.
System survives.
- Only non-sliced bsdlabel style partitioning is currently supported (but provisions
are made towards GPT support, which should follow soon)
- Enable storage support in loader on ARM
Obtained from: Semihalf
to gptboot, i.e. installed in a freebsd-boot partition using /sbin/gpart or
/sbin/gpt.
Tweak the /boot/loader ZFS support so that it can find ZFS pools that are
contained in GPT partitions.
for virtualization.
Instead of initializing the affected global variables at instatiation,
assign initial values to them in initializer functions. As a rule,
initialization at instatiation for such variables should never be
introduced again from now on. Furthermore, enclose all instantiations
of such global variables in #ifdef VIMAGE_GLOBALS blocks.
Essentialy, this change should have zero functional impact. In the next
phase of merging network stack virtualization infrastructure from
p4/vimage branch, the new initialization methology will allow us to
switch between using global variables and their counterparts residing in
virtualization containers with minimum code churn, and in the long run
allow us to intialize multiple instances of such container structures.
Discussed at: devsummit Strassburg
Reviewed by: bz, julian
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
src/sys/dev/usb2/core/usbdevs
src/sys/dev/usb2/include/urio2_ioctl.h
src/sys/dev/usb2/storage/ustorage2_fs.h
These files are not used any more.
src/usr.sbin/Makefile
src/etc/mtree/BSD.include.dist
src/include/Makefile
src/lib/Makefile
src/share/man/man7/hier.7
src/share/mk/bsd.libnames.mk
src/etc/mtree/BSD.include.dist
Make "usbconfig" and "libusb20" a part of the default build.
src/sys/dev/usb/rio500_usb.h
src/sys/dev/usb2/storage/urio2.c
Use common include file.
src/sys/dev/usb2/bluetooth/ng_ubt2.c
Make USB bluetooth depend on "ng_hci" module.
src/sys/dev/usb2/controller/ehci2.c
src/sys/dev/usb2/controller/ehci2.h
Patches for Marvell EHCI.
src/sys/dev/usb2/core/usb2_busdma.c
Bugfix for 64-bit platforms. Need to unload the previously loaded DMA
map and some cleanup regarding some corner cases.
src/sys/dev/usb2/core/usb2_core.h
src/sys/dev/usb2/core/usb2_dev.c
src/sys/dev/usb2/core/usb2_dev.h
Bugfix for libusb filesystem interface.
New feature: Add support for filtering device data at the expense of the
userland process.
Add some more comments.
Some minor code styling.
Remove unused function, usb2_fifo_get_data_next().
Fix an issue about "fifo_index" being used instead of "ep_index".
src/sys/dev/usb2/core/usb2_device.c
src/sys/dev/usb2/core/usb2_generic.c
Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when
doing an alternate setting.
Cleanup USB IOCTL and USB reference handling.
Fix a corner case where USB-FS was left initialised after
setting a new configuration or alternate setting.
src/sys/dev/usb2/core/usb2_hub.c
Improvement: Check all USB HUB ports by default at least one time.
src/sys/dev/usb2/core/usb2_request.c
Bugfix: Make sure destination ASCII string is properly zero terminated
in all cases.
Improvement: Skip invalid characters instead of replacing with a dot.
src/sys/dev/usb2/core/usb2_util.c
src/sys/dev/usb2/image/uscanner2.c
Spelling.
src/sys/dev/usb2/include/Makefile
Share "usbdevs" with the old USB stack.
src/sys/dev/usb2/include/usb2_devid.h
src/sys/dev/usb2/include/usb2_devtable.h
Regenerate files.
Alfred: Please fix the RCS tag at the top.
src/sys/dev/usb2/include/usb2_ioctl.h
Fix compilation of "kdump".
src/sys/dev/usb2/serial/ubsa2.c
src/sys/dev/usb2/serial/ugensa2.c
Remove device ID's which will end up in a new 3G driver.
src/sys/dev/usb2/sound/uaudio2.c
Correct a debug printout.
src/sys/dev/usb2/storage/umass2.c
Sync with old USB stack.
src/lib/libusb20/libusb20.3
Add more documentation.
src/lib/libusb20/libusb20.c
Various bugfixes and improvements.
src/usr.sbin/usbconfig/dump.c
src/usr.sbin/usbconfig/usbconfig.c
New commands for dumping strings and doing custom USB requests from
the command line.
Remove keyword requirements from generated files:
"head/sys/dev/usb2/include/usb2_devid.h"
"head/sys/dev/usb2/include/usb2_devtable.h"
ask NDINIT to return a locked vnode instead of letting it drop the
lock and return a referenced vnode and then relock the vnode a few
lines down. This matches the behavior of other filesystem mount routines.
- An "at" hint now reserves a device name.
- A new BUS_HINT_DEVICE_UNIT method is added to the bus interface. When
determining the unit number of a device, this method is invoked to
let the bus driver specify the unit of a device given a specific
devclass. This is the only way a device can be given a name reserved
via an "at" hint.
- Implement BUS_HINT_DEVICE_UNIT() for the acpi(4) and isa(4) bus drivers.
Both of these busses implement this by comparing the resources for a
given hint device with the resources enumerated by ACPI/PnPBIOS and
wire a unit if the hint resources are a subset of the "real" resources.
- Use bus_hinted_children() for adding hinted devices on isa(4) busses
now instead of doing it by hand.
- Remove the unit kludging from sio(4) as it is no longer necessary.
Prodding from: peter, imp
OK'd by: marcel
MFC after: 1 month
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
read before we configure the card, so we can implement
/dev/cardbus*.cis. Also, do this on a per-child basis, so we now have
a different name than before. I think i'll have to fix that for some
legacy tools to keep working.
I can now do a dumpcis on my running atheros card and have it still work!
kern_unlinkat(), that expects that vn_start_write() actually fills the mp
even when the call failed.
As Tor noted, that pattern relies on the the type stability of the mount
points, as well as that suspended mount points are never freed and
V_XSLEEP is always passed to vn_start_write() when called on a freed
mount point.
Reported by: stass
Reviewed by: tegge
PR: 123768
rerun of the streaming cache for silicon bug workarounds.
- Announce the presence of a streaming cache on attach for
informational purposes.
- For performance reasons don't do unnecessary flushes of the
streaming cache when coherent mappings are synced.
- Fix some minor style issues.
class CPUs. In theory one could also use versions additionally
taking advantage of the prefetch cache with cheetah-class CPUs,
in my worldstone runs these either didn't provide extra speedup
(USIII+) in comparison to the existing spitfire versions or were
even slightly slower (USIIIi) though, so they aren't committed
for now.
The basic problem leading to the VIS-based copy/zero functions
being initially disabled for cheetah-class CPUs was solved by
letting cheetah_init() clear DCR_IFPOE.
redundant malloc/free. Add comments about how this should really be
done. Fix an overly verbose comment about under 1MB mapping: go ahead
and set the bits, but we ignore them.
- If the flag is set and auto-select fails, assume disk is not present.
- Set disk empty flag only when the floppy controller reset is needed.
It fixes regression introduced in r1.311, which prevented it from ignoring
errors. Now fdformat(1) and dd(1) with conv=noerror option can continue
when read/write errors occur as they should.
- Do not retry disk probing as it is extremely slow and pointless.
- Move the disk probing code into a separate function.
- Do not reset disk empty flag if write-protect check fails somehow.
PR: kern/116538[1]
I have fixed the reported problems - if you still have trouble with it, please
contact me with as much detail as possible so that I can track down any other
issues as quickly as possible.
In my commit that moved uname(), setdomainname() and getdomainname() to
COMPAT_FREEBSD4, I also removed PRIV_SETDOMAINNAME, because it was
already protected by userland_sysctl(). We'd better keep the number 20
reserved, to prevent it from being used again.
Requested by: rwatson
pointer in a local thread. While this is unlikely to significantly
improve performance given modern compiler behavior, it makes the code
more readable and reduces diffs to the Mac OS X version of the same
code (which stores things in creds in the same way, but where the
cred for a thread is reached quite differently).
Discussed with: sson
MFC after: 1 month
Sponsored by: Apple Inc.
Obtained from: TrustedBSD Project
the softc is reset a few times during probing.
Print 'changing to modem mode' messages if booting verbose to show the
reason for the time delay. Note: Some devices (Huawei for one) take 20
seconds to appear on the USB bus).
up space. If the buffer cache fills up then the disk systems can
grind to a halt. Better tuning can be figured out later.
Tested by: Tim, others and work
Reviewed by: Kostik Belousov
PR: 128832
the nfsd problems that some people have with the new code.
Add support for the vfs.nfsrv.nfs_privport sysctl which denies access unless
the client is using a port number less than 1024. Not really sure if this is
particularly useful since it doesn't add any real security.
fix the problems a few people have noticed with the new code. People who want
to continue testing the new code or who need RPCSEC_GSS support should use
the new option NFS_NEWRPC to select it.
can be controlled by ifconfig(8). Note, VLAN hardware tagging
controls still lacks required handler but it requires more driver
cleanups so I didn't touch that part.
PR: kern/128766
queue length variables as well, avoiding storing the limit in a larger
type than the length.
Submitted by: sson
Sponsored by: Apple Inc.
MFC after: 1 week
changes since the last imported OpenBSM release:
OpenBSM 1.1 alpha 2
- Include files in OpenBSM are now broken out into two parts: library builds
required solely for user space, and system includes, which may also be
required for use in the kernels of systems integrating OpenBSM. Submitted
by Stacey Son.
- Configure option --with-native-includes allows forcing the use of native
include for system includes, rather than the versions bundled with OpenBSM.
This is intended specifically for platforms that ship OpenBSM, have adapted
versions of the system includes in a kernel source tree, and will use the
OpenBSM build infrastructure with an unmodified OpenBSM distribution,
allowing the customized system includes to be used with the OpenBSM build.
Submitted by Stacey Son.
- Various strcpy()'s/strcat()'s have been changed to strlcpy()'s/strlcat()'s
or asprintf(). Added compat/strlcpy.h for Linux.
- Remove compatibility defines for old Darwin token constant names; now only
BSM token names are provided and used.
- Add support for extended header tokens, which contain space for information
on the host generating the record.
- Add support for setting extended host information in the kernel, which is
used for setting host information in extended header tokens. The
audit_control file now supports a "host" parameter which can be used by
auditd to set the information; if not present, the kernel parameters won't
be set and auditd uses unextended headers for records that it generates.
OpenBSM 1.1 alpha 1
- Add option to auditreduce(1) which allows users to invert sense of
matching, such that BSM records that do not match, are selected.
- Fix bug in audit_write() where we commit an incomplete record in the
event there is an error writing the subject token. This was submitted
by Diego Giagio.
- Build support for Mac OS X 10.5.1 submitted by Eric Hall.
- Fix a bug which resulted in host XML attributes not beingguments so that const strings can be passed
as arguments to tokens. This patch was submitted by Xin LI.
- Modify the -m option so users can select more then one audit event.
- For Mac OS X, added Mach IPC support for audit trigger messages.
- Fixed a bug in getacna() which resulted in a locking problem on Mac OS X.
- Added LOG_PERROR flag to openlog when -d option is used with auditd.
- AUE events added for Mac OS X Leopard system calls.
Obtained from: TrustedBSD Project
Sponsored by: Apple Inc.
- Fix to ioctl path in which the length could be 0 which means
no data in/out from LSI.
- Fix to ioctl path in which the data in the sense data space
of the ioctl packet is a really a pointer to some location in
user-space. From LSI re-worked a bit by me.
- Add HW support for next gen cards from LSI.
Thanks to LSI for their support!
Submitted by: jhb, LSI
MFC after: 3 days
-Improvement: panic() on INVARIANTS kernels if memory allocation
fails for a tagblock in sctp_add_vtag_to_timewait().
-Bugfix: Protect code in sctp_is_in_timewait() by
SCTP_INP_INFO_WLOCK/SCTP_INP_INFO_WUNLOCK.
-Cleanup: Get rid of unused variable now in sctp_init_asoc().
-Bugfix: Reuse the correct vtag in sctp_add_vtag_to_timewait().
-Cleanup: Get rid of unused constant SCTP_TIME_WAIT_SHORT
in sctp_constants.h.
-Improvement: Use all hash buckets of the vtag hash table.
-Cleanup: Get rid of then unused constant SCTP_STACK_VTAG_HASH_SIZE_A.
-Bugfix: Handle SHUTDOWN;SACK packet correctly.
-Bugfix: Last TSN in a gap ack block was not being "ack'd"
in the internal scoreboard.
Obtained from: (with help from Michael Tuexen)
The same (vendor, product) tuple is used for aue(4) adapters,
but I am not sure if the quirk is correct. I'm using the USB
device 'release' info to skip aue(4) detection right now, but
if there's a better way to differentiate between USB-LAN and
USB Bluetooth we should update the quirk.
Reviewed by: imp, rink
MFC after: 2 weeks
controller. The controller is also known as L1E(AR8121) and
L2E(AR8113/AR8114). Unlike its predecessor Attansic L1,
AR8121/AR8113/AR8114 uses completely different Rx logic such that
it requires separate driver. Datasheet for AR81xx is not available
to open source driver writers but it shares large part of Tx and
PHY logic of L1. I still don't understand some part of register
meaning and some MAC statistics counters but the driver seems to
have no critical issues for performance and stability.
The AR81xx requires copy operation to pass received frames to upper
stack such that ale(4) consumes a lot of CPU cycles than that of
other controller. A couple of silicon bugs also adds more CPU
cycles to address the known hardware bug. However, if you have fast
CPU you can still saturate the link.
Currently ale(4) supports the following hardware features.
- MSI.
- TCP Segmentation offload.
- Hardware VLAN tag insertion/stripping with checksum offload.
- Tx TCP/UDP checksum offload and Rx IP/TCP/UDP checksum offload.
- Tx/Rx interrupt moderation.
- Hardware statistics counters.
- Jumbo frame.
- WOL.
AR81xx PCIe ethernet controllers are mainly found on ASUS EeePC or
P5Q series of ASUS motherboards. Special thanks to Jeremy Chadwick
who sent the hardware to me. Without his donation writing a driver
for AR81xx would never have been possible. Big thanks to all people
who reported feedback or tested patches.
HW donated by: koitsu
Tested by: bsam, Joao Barros <joao.barros <> gmail DOT com >
Jan Henrik Sylvester <me <> janh DOT de >
Ivan Brawley < ivan <> brawley DOT id DOT au >,
CURRENT ML
Peter Holm just discovered this funny bug inside the TTY code: if
uiomove() in ttydisc_write() returns an error, we forget to relock the
TTY before jumping out of ttydisc_write(). Fix it by placing
tty_unlock() and tty_lock() around uiomove().
Submitted by: pho
regular header tokens. The extended header tokens contain an IP
or IPv6 address which makes it possible to identify which host an
audit record came from when audit records are centralized.
If the host information has not been specified, the system will
default to the old style headers. Otherwise, audit records that
are created as a result of system calls will contain host information.
This implemented has been designed to be consistent with the Solaris
implementation. Host information is set/retrieved using the A_GETKAUDIT
and A_SETKAUDIT auditon(2) commands. These commands require that a
pointer to a auditinfo_addr_t object is passed. Currently only IP and
IPv6 address families are supported.
The users pace bits associated with this change will follow in an
openbsm import.
Reviewed by: rwatson, (sson, wsalamon (older version))
MFC after: 1 month
- Use `fildes[2]' instead of `*fildes' to make more clear that pipe(2)
fills an array with two descriptors.
- Remove EFAULT from the manual page. Because of the current calling
convention, pipe(2) raises a segmentation fault when an invalid
address is passed.
- Introduce kern_pipe() to make it easier for binary emulations to
implement pipe(2).
- Make Linux binary emulation use kern_pipe(), which means we don't have
to recover td_retval after calling the FreeBSD system call.
Approved by: rdivacky
Discussed on: arch
This prevents a panic which occurs when a driver attempts to load
firmware at boot via firmware_get() when the firmware module has not
been preloaded. firmware_get() will enqueue a task using a struct
taskqueue allocated on the stack, and the machine will crash much
later in the firmware taskq thread when taskqs are started and the
struct taskqueue is garbage.
Not objected to by: sam
- Do not let individual KLD module unregister firmware image loaded by ispfw
or vice versa.
- Make 'kldunload ispfw' actually unregister all firmware images loaded by
ispfw, not just 'isp_1040'.
- Print which KLD module actually loaded the firmware image.
- Remove unused return value from do_load_fw() and do_unload_fw() and remove
duplicate sys/param.h while I am here.
dependencies. A 'struct pmc_classdep' structure describes operations
on PMCs; 'struct pmc_mdep' contains one or more 'struct pmc_classdep'
structures depending on the CPU in question.
Inside PMC class dependent code, row indices are relative to the
PMCs supported by the PMC class; MI code in "hwpmc_mod.c" translates
global row indices before invoking class dependent operations.
- Augment the OP_GETCPUINFO request with the number of PMCs present
in a PMC class.
- Move code common to Intel CPUs to file "hwpmc_intel.c".
- Move TSC handling to file "hwpmc_tsc.c".
Looking at our source code history, it seems the uname(),
getdomainname() and setdomainname() system calls got deprecated
somewhere after FreeBSD 1.1, but they have never been phased out
properly. Because we don't have a COMPAT_FREEBSD1, just use
COMPAT_FREEBSD4.
Also fix the Linuxolator to build without the setdomainname() routine by
just making it call userland_sysctl on kern.domainname. Also replace the
setdomainname()'s implementation to use this approach, because we're
duplicating code with sysctl_domainname().
I wasn't able to keep these three routines working in our
COMPAT_FREEBSD32, because that would require yet another keyword for
syscalls.master (COMPAT4+NOPROTO). Because this routine is probably
unused already, this won't be a problem in practice. If it turns out to
be a problem, we'll just restore this functionality.
Reviewed by: rdivacky, kib
On RELENG_6 (and probably RELENG_7) we see our syscons windows and
pseudo-terminals have the following buffer sizes:
| LINE RAW CAN OUT IHIWT ILOWT OHWT LWT COL STATE SESS PGID DISC
| ttyv0 0 0 0 7680 6720 2052 256 7 OCcl 1146 1146 term
| ttyp0 0 0 0 7680 6720 1296 256 0 OCc 82033 82033 term
These buffer sizes make no sense, because we often have much more output
than input, but I guess having higher input buffer sizes improves
guarantees of the system.
On MPSAFE TTY I just sent both the input and output buffer sizes to 7
KB, which is pretty big on a standard FreeBSD install with 8 syscons
windows and some PTY's. Reduce the baud rate to 9600 baud, which means
we now have the following buffer sizes:
| LINE INQ CAN LIN LOW OUTQ USE LOW COL SESS PGID STATE
| ttyv0 1920 0 0 192 1984 0 199 7 2401 2401 Oil
| pts/0 1920 0 0 192 1984 0 199 5631 1305 2526 Oi
This is a lot smaller, but for pseudo-devices this should be good
enough. You need to do a lot of punching to fill up a 7.5 KB input
buffer. If it turns out things don't work out this way, we'll just
switch to 19200 baud.
from one parent directory to another, in addition to the usual access checks
one also needs write access to the subdirectory being moved.
Approved by: rwatson (mentor), pjd
still valid. We were checking the state of the header and
not the table.
PR: 119868
Based on a patch from: Jaakko Heinonen <jh@saunalahti.fi>
MFC after: 1 week
tcp_mss() and tcp_mss_update() so that tcp_mtudisc() could
re-use the same code.
Move the TSO logic back to tcp_mss() and out of tcp_mss_update().
We tried to avoid that initially but if were are called from
tcp_output() with EMSGSIZE, we cleared the TSO flag on the tcpcb
there, called into tcp_mtudisc() and tcp_mss_update() which
then would reenable TSO on the tcpcb based on TSO capabilities
of the interface as learnt in tcp_maxmtu/6().
So if TSO was enabled on the (possibly new) outgoing interface
it was turned back on, which lead to an endless loop between
tcp_output() and tcp_mtudisc() until we overflew the stack.
Reported by: kmacy
MFC after: 2 months (along with r182851)
tcp_mss() and tcp_mss_update() so that tcp_mtudisc() could
re-use the same code.
In case we return early and got a metricptr to pass the hostcache
info back to the caller we need to initialize the data to a defined
state (zero it) as tcp_hc_get() would do if there was no hit.
Without that the caller would check on random stack garbage which
could lead to undefined results.
This only affected tcp_mss() if there was no routing entry for the peer,
tcp_mtudisc() was not affected.
MFC after: 2 months (along with r182851)
NATM needs 'struct in_addr' to compile, which is a problem on its own
but include in.h for now if we have NATM but neither INET or INET6.
MFC after: 2 months
the sc does not have 'an_have_rssimap' variable.
Add an ANCACHE check to poperly hide the case and make an(4)
compile without INET.
MFC after: 2 months
Because the TTY hooks interface was not finished when I imported the
MPSAFE TTY layer, I had to disconnect the snp(4) driver. This snp(4)
implementation has been sitting in my P4 branch for some time now.
Unfortunately it still doesn't use the same error handling as snp(4)
(returning codes through FIONREAD), but it should already be usable.
I'm committing this to SVN, hoping someone else could polish off its
rough edges. It's always better than having a broken driver sitting in
the tree.
To prevent it from compiling without INET and INET6 we should put
an explicit #error in there like we have in other files,
but not rely on an unused variable.
MFC after: 2 months
Note that these changes will not make the driver work on powerpc, but it should fix at least the i386/amd64 cases.
Obtained from: //depot/projects/usb/src/sys/dev/usb2/wlan/if_zyd2.c#20
Noticed by: jeli, ed
vnode in question does not need to be held. All the data structures used
during the name lookup are protected by the global name cache lock.
Instead, the caller merely needs to ensure a reference is held on the
vnode (such as vhold()) to keep it from being freed.
In the case of procfs' <pid>/file entry, grab the process lock while we
gain a new reference (via vhold()) on p_textvp to fully close races with
execve(2).
For the kern.proc.vmmap sysctl handler, use a shared vnode lock around
the call to VOP_GETATTR() rather than an exclusive lock.
MFC after: 1 month
flag. Specifically, if two threads race to create a dirhash for a
directory, then one might already have created a private dirhash
structure (and locked it) when it realizes the directory now has a
structure and tries to lock that one.
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
Also: Change the initialisation of the command string to a static
initialiser. Verify it against the output of umass.c when being sent a
command using 'camcontrol eject da0' to a Bulk-Only device.
This should make those devices work that need a SCSI eject command to
switch to modem mode (Novatel 950D and others).
chdir(), chroot(), eaccess(), fpathconf(), fstat(), fstatfs(), lseek()
(when figuring out the current size of the file in the SEEK_END case),
pathconf(), readlink(), and statfs() system calls.
Submitted by: ups (mostly)
Tested by: pho
MFC after: 1 month
Really, the concept of holdcnt in the struct mount is rappresented by
the mnt_ref (which prevents the type-stable structure from being
"recycled) handled through vfs_ref() and vfs_rel().
On this optic, switch the holdcnt acquisition into an emulated vfs_ref()
(and subsequent release into vfs_rel()).
Discussed with: kib
Tested by: pho
The smb library in userspace already knows how to deal with this type of
cloning.
This also corrects a leak in which the netsmb kernel module could not be
unloaded if device nodes had been stat'd but not open'd.
Discussed with: kib
and server. This replaces the RPC implementation of the NFS client and
server with the newer RPC implementation originally developed
(actually ported from the userland sunrpc code) to support the NFS
Lock Manager. I have tested this code extensively and I believe it is
stable and that performance is at least equal to the legacy RPC
implementation.
The NFS code currently contains support for both the new RPC
implementation and the older legacy implementation inherited from the
original NFS codebase. The default is to use the new implementation -
add the NFS_LEGACYRPC option to fall back to the old code. When I
merge this support back to RELENG_7, I will probably change this so
that users have to 'opt in' to get the new code.
To use RPCSEC_GSS on either client or server, you must build a kernel
which includes the KGSSAPI option and the crypto device. On the
userland side, you must build at least a new libc, mountd, mount_nfs
and gssd. You must install new versions of /etc/rc.d/gssd and
/etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf.
As long as gssd is running, you should be able to mount an NFS
filesystem from a server that requires RPCSEC_GSS authentication. The
mount itself can happen without any kerberos credentials but all
access to the filesystem will be denied unless the accessing user has
a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There
is currently no support for situations where the ticket file is in a
different place, such as when the user logged in via SSH and has
delegated credentials from that login. This restriction is also
present in Solaris and Linux. In theory, we could improve this in
future, possibly using Brooks Davis' implementation of variant
symlinks.
Supporting RPCSEC_GSS on a server is nearly as simple. You must create
service creds for the server in the form 'nfs/<fqdn>@<REALM>' and
install them in /etc/krb5.keytab. The standard heimdal utility ktutil
makes this fairly easy. After the service creds have been created, you
can add a '-sec=krb5' option to /etc/exports and restart both mountd
and nfsd.
The only other difference an administrator should notice is that nfsd
doesn't fork to create service threads any more. In normal operation,
there will be two nfsd processes, one in userland waiting for TCP
connections and one in the kernel handling requests. The latter
process will create as many kthreads as required - these should be
visible via 'top -H'. The code has some support for varying the number
of service threads according to load but initially at least, nfsd uses
a fixed number of threads according to the value supplied to its '-n'
option.
Sponsored by: Isilon Systems
MFC after: 1 month
allocating resources to read the CIS. I'm not sure when this changed,
but it is totally wrong. Also, add a minor improvement to the
debugging.
This should help everybody trying to run dumpcis on atheros wireless
card as well.
MFC after: 2 days
right... Good thing the size was ignored...
Where this macro is used, there's no reason to do it anyway. There
seems to have been some old-time confusion between the CIS pointer
definition, and the BAR definitions at the base of this bug.
compiled into the main AMR driver. It's code that is nice to have but not
required for normal operation, and it is reported to cause problems for some
people.
usable for newer CPUs. The new value allows 2 x quad core configuration
dumps to fit within the initial buffer without reallocations.
Approved by: gnn (mentor) (older version)
Pointed out by: rdivacky
dropping the connection when the requested service isn't available, or
we may try to release a lock that isn't locked.
This prevents an assertion failure when trying to mount a non-present
share using smbfs with INVARIANTS; a lock order reversal warning that
immediately follows is not yet fixed.
Reported by: attilio
MFC after: 3 days
For an unknown reason the touch pad of my PowerBook generates button 5
events when you operate it. This causes the adb_mouse code to convert
them to button 2 events, which is not what we want.
Add a new flag, AMS_TOUCHPAD, which is used to distinguish the touch
pad. When set, don't convert button events of unknown buttons to the
last button.
There are still three problems left with respect to user input:
- The mouse button events are not properly processed when the touch pad
isn't touched.
- The arrow keys on the keyboard don't work inside X11.
- The power button isn't handled by the kernel, similar to the ACPI
power button on i386/amd64.
Approved by: nwhitehorn
Make the ISA bus keep track of more PNP details. Plus a minor style
fix while I'm here. More could be done here, but except for some SBCs
that don't have ACPI, there's limited value to anybody in doing so.
use process ID as ACPI thread ID. Concurrent requests with equal thread
IDs broke ACPI mutexes operation causing unpredictable errors including
AE_AML_MUTEX_NOT_ACQUIRED that I have seen.
Use kernel thread ID instead of process ID for ACPI thread.
- Implement real draining for vfs consumers by not relying on the
mnt_lock and using instead a refcount in order to keep track of lock
requesters.
- Due to the change above, remove the mnt_lock lockmgr because it is now
useless.
- Due to the change above, vfs_busy() is no more linked to a lockmgr.
Change so its KPI by removing the interlock argument and defining 2 new
flags for it: MBF_NOWAIT which basically replaces the LK_NOWAIT of the
old version (which was unlinked from the lockmgr alredy) and
MBF_MNTLSTLOCK which provides the ability to drop the mountlist_mtx
once the mnt interlock is held (ability still desired by most consumers).
- The stub used into vfs_mount_destroy(), that allows to override the
mnt_ref if running for more than 3 seconds, make it totally useless.
Remove it as it was thought to work into older versions.
If a problem of "refcount held never going away" should appear, we will
need to fix properly instead than trust on such hackish solution.
- Fix a bug where returning (with an error) from dounmount() was still
leaving the MNTK_MWAIT flag on even if it the waiters were actually
woken up. Just a place in vfs_mount_destroy() is left because it is
going to recycle the structure in any case, so it doesn't matter.
- Remove the markercnt refcount as it is useless.
This patch modifies VFS ABI and breaks KPI for vfs_busy() so manpages and
__FreeBSD_version will be modified accordingly.
Discussed with: kib
Tested by: pho
a little refinement, but is good enough to commit as is.
# Should look to see if I should move swab(3) into the kernel or just
# provide the unoptimized routine here.
Reviewed by: marcel@
whatever template was used to create this driver. It is not
necessary, and wouldn't work anyway since (a) this device will never
be in a cardbus tin-can and (b) the driver isn't even PCI, but instead
a built-in NIC on the IDT RC32434 on its internal bus.
record queue, so move the offset field from the per-record
audit_pipe_entry structure to the audit_pipe structure.
Now that we support reading more than one record at a time, add a
new summary field to audit_pipe, ap_qbyteslen, which tracks the
total number of bytes present in a pipe, and return that (minus
the current offset) via FIONREAD and kqueue's data variable for
the pending byte count rather than the number of bytes remaining
in only the first record.
Add a number of asserts to confirm that these counts and offsets
following the expected rules.
MFC after: 2 months
Sponsored by: Apple, Inc.
We often run into these very high column numbers when we run curses
applications, because they don't print any newlines. This messes up the
table output of `pstat -t'. If these numbers get really high, they
aren't of any use to the reader anyway. Convert them to `99999' when
they run out of bounds.
One of the pieces of code that I had left alone during the development
of the MPSAFE TTY layer, was tty_cons.c. This file actually has two
different functions:
- It contains low-level console input/output routines (cnputc(), etc).
- It creates /dev/console and wraps all its cdevsw calls to the
appropriate TTY.
This commit reimplements the second set of functions by moving it
directly into the TTY layer. /dev/console is now a character device node
that's basically a regular TTY, but does a lookup of `si_drv1' each time
you open it. d_write has also been changed to call log_console().
d_close() is not present, because we must make sure we don't revoke the
TTY after writing a log message to it.
Even though I'm not convinced this is in line with the future directions
of our console code, it is a good move for now. It removes recursive
locking from the top half of the TTY layer. The previous implementation
called into the TTY layer with Giant held.
I'm renaming tty_cons.c to kern_cons.c now. The code hardly contains any
TTY related bits, so we'd better give it a less misleading name.
Tested by: Andrzej Tobola <ato iem pw edu pl>,
Carlos A.M. dos Santos <unixmania gmail com>,
Eygene Ryabinkin <rea-fbsd codelabs ru>
Right now ams_read() uses cv_wait() to wait for new data to arrive on
the mouse device. This means that when you run `cat /dev/ams0', it
cannot be interrupted directly. After you press ^C, you first need to
move the mouse before cat will quit. Make this function use
cv_wait_sig(), which allows it to be interrupted directly.
Reviewed by: nwhitehorn
cable tuning. This has helped in some installations for hardware
deployed by a former employer. Made optional because the lists aren't
full of complaints about these cards... even when they were wildly
popular.
Reviewed by: attilio@, jhb@, trhodes@ (all an older version of the patch)
read(2), which meant that records longer than the buffer passed to read(2)
were dropped. Instead take the approach of allowing partial reads to be
continued across multiple system calls more in the style of streaming
character device.
This means retaining a record on the per-pipe queue in a partially read
state, so maintain a current offset into the record. Keep the record on
the queue during a read, so add a new lock, ap_sx, to serialize removal
of records from the queue by either read(2) or ioctl(2) requesting a pipe
flush. Modify the kqueue handler to return bytes left in the current
record rather than simply the size of the current record.
It is now possible to use praudit, which used the standard FILE * buffer
sizes, to track much larger record sizes from /dev/auditpipe, such as
very long command lines to execve(2).
MFC after: 2 months
Sponsored by: Apple, Inc.
processes exits at the same time. The linux_emuldata structure is freed
but p->p_emuldata is left as a dangling pointer to the just freed memory.
The check for W_EXIT in the loop scanning the child processes isn't safe
since the state of the child process can change right afterwards. Lock
the process and check the W_EXIT before delivering signal.
Submitted by: tegge
Reviewed by: davidxu
MFC after: 1 week
within an object that a mapping refers to. fileid and fsid are inode/dev
for vnodes. (Linux procfs has these and valgrind is really unhappy
without them.) I believe I didn't change the size of the struct.
on G4 machines. On the assumption that most people using FreeBSD on Apple
hardware are not using serial consoles, set boot1's output to screen. This
should be revisited. While here, reduce verbosity of boot1.
pipe has overflowed, drop the newest, rather than oldest, record. This
makes overflow drop behavior consistent with memory allocation failure
leading to drop, avoids touching the consumer end of the queue from a
producer, and lowers the CPU overhead of dropping a record by dropping
before memory allocation and copying.
Obtained from: Apple, Inc.
MFC after: 2 months
protecting the list of audit pipes, and a per-pipe mutex protecting the
queue.
Likewise, replace the single global condition variable used to signal
delivery of a record to one or more pipes, and add a per-pipe condition
variable to avoid spurious wakeups when event subscriptions differ
across multiple pipes.
This slightly increases the cost of delivering to audit pipes, but should
reduce lock contention in the presence of multiple readers as only the
per-pipe lock is required to read from a pipe, as well as avoid
overheading when different pipes are used in different ways.
MFC after: 2 months
Sponsored by: Apple, Inc.
mutex, as it's rarely changed but frequently accessed read-only from
multiple threads, so a potentially significant source of contention.
MFC after: 1 month
Sponsored by: Apple, Inc.
capabilities reported by the ap. These need to be cross-checked
against the local configuration in the vap. Previously we were
only checking the ap capabilities which meant that if an ap reported
it was ff-capable but we were not setup to use them we'd try to do
ff aggregation and drop the frame.
There are a number of problems to be fixed here but applying this
fix immediately as the problem causes all traffic to stop (and has
not workaround).
Reported by: Ashish Shukla
access control checks in mac_bsdextended are not in the same
namespace as the MBI_ flags used in ugidfw policies, so add an
explicit conversion routine to get from one to the other.
Obtained from: TrustedBSD Project
sdhci supports up to 65535 blocks transfers, at91_mci - one block.
Enable multiblock operations disabled before to follow at91_mci driver
limitations.
Reviewed by: imp@
dump of detected ULE CPU topology. This dump can be used to check the
topology detection and for general system information.
An example of CPU topology dump is:
kern.sched.topology_spec: <groups>
<group level="1" cache-level="0">
<cpu count="8" mask="0xff">0, 1, 2, 3, 4, 5, 6, 7</cpu>
<flags></flags>
<children>
<group level="2" cache-level="0">
<cpu count="4" mask="0xf">0, 1, 2, 3</cpu>
<flags></flags>
</group>
<group level="2" cache-level="0">
<cpu count="4" mask="0xf0">4, 5, 6, 7</cpu>
<flags></flags>
</group>
</children>
</group>
</groups>
Reviewed by: jeff
Approved by: gnn (mentor)
while doing the block store workaround so we restore the correct
floating-point registers state in case of nested floating-point
operations resulting from nested interrupts. This allows the
VIS-based block copy/zero functions to be used on machines
requiring this workaround. Alternatively, we could take care of
saving the floating-point registers here, which would be more
inefficiently though and also involves turning off interrupts.
- It turns out that the SCZ_PCI_DMA_SYNC register doesn't work
like the TOMXMS_PCI_DMA_SYNC_PEND one (but more like the
corresponding register in of Hummingbird and Sabre bridges)
and writing the INO of the respective device to it causes a
Safari bus error. However, due to the Schizo errata I-23,
SCZ_PCI_DMA_SYNC can't be used as intended either, so remove
consistent DMA syncing for Schzio bridges for now, which means
that add-on cards with non-"sun4u compliant" (whatever that
means exactly) PCI-PCI-bridges should be avoided until the
proper workaround is implemented. [1]
Reported by: Michael Moll [1]
This should fix q_time overflow, which happens after 2^32/(86400*hz) days of
uptime (~50days for hz = 1000).
q_time overflow cause following:
- traffic shaping may not work in 'fast' mode (not enabled by default).
- incorrect average queue length calculation in RED/GRED algorithm.
NB: due to ABI change this change is not applicable to stable.
PR: kern/128401
to add more V* constants, and the variables changed by this patch were often
being assigned to mode_t variables, which is 16 bit.
Approved by: rwatson (mentor)
memory mappings when the MAC label on a process changes, to
mac_proc_vm_revoke(),
It now also acquires its own credential reference directly from the
affected process rather than accepting one passed by the the caller,
simplifying the API and consumer code.
Obtained from: TrustedBSD Project
vpollinfo with vnode interlock. Fully initialize vpollinfo before putting
pointer to it into vp->v_pollinfo.
Discussed with: dwhite
Tested by: pho
MFC after: 1 week
that they operate directly on credentials: mac_proc_create_swapper(),
mac_proc_create_init(), and mac_proc_associate_nfsd(). Update policies.
Obtained from: TrustedBSD Project
be a no-op request, and why this might have to change if we want to allow
leaving a partition someday.
Obtained from: TrustedBSD Project
MFC after: 3 days
"ticks" goes negative. This breaks the signed comparison in softclock.
This causes sleep() to never wake up, tcp to stop, etc etc. This is
bad(TM). Use the SEQ_LT() method from tcp's sequence number comparisons.
driver (rev 1.3), by Joerg Sonnenberger.
Note: This change is untested as I do not own the hardware. Let me know
if things work or do not work for you by sending me the output dmesg (and
usbctl -f /dev/usbX if possible). Thanks.
for the BCM5714 revision A0 when in a multi-port configuration
and unconditionally for the remainder of the class of BCM575X
and beyond chips.
This was prodded by mav and is based on a suggestion and a
patch submitted by jhb.
Reviewed by: jhb
MFC after: 2 months
V9 stack bias so we no longer need to add it in db_backtrace()
and stack_capture() respectively. This also reverts r182018,
which kludged around the resulting unaligned access.
- Sync the sun4v versions of db_trace.c and stack_machdep.c with
the sparc64 ones and fix some style bugs.
MFC after: 3 days
rs400/rs480 should clear the RADEON_BUS_MASTER_DIS bit. This should get
the rs485 IGP chips going again.
Approved by: jhb (mentor)
Obtained from: drm git master
making the use of sc_hwmap to do direct mapping impractical. Switch to
indexing by the rate index instead of the rate code and adjust associated
state and logic appropriately. This has several benefits including
simplification of the led code.
o fix radiotap capture of HT rates
o fix conditional compilation of HT radiotap support to be based on the
hal having 5416 support; not the ABI version as hal builds may or may
not include 5416 support
o update tx rssi data only when an ACK was received
o return tx rssi from sampled data instead of the last frame
o track noise floor
o return rx rssi and noise floor (was broken)
o pass country code, outdoor indication, and ecm mode into the hal
when requesting a channel list
o add a console msg when regulatory setup fails
o add placeholder code to map between Atheros sku's and 802.11 sku's
that handles only the debug country code used to unlock the full
channel list (to be used only for debugging)
o fix multiple instances of mismapping the 802.11 location to the
outdoor indication (anywhere may be outdoor also)
in sta and adhoc modes; this should've been done forever ago as most all
drivers use this hook to set per-station transmit parameters such as for
tx rate control
o adjust drivers to remove explicit calls to the driver newassoc method
a) Need for EEOR mode to take the min of the socket buffer size and the
add more threshold, otherwise if you are so silly as to set a send
buf size less than the add-more you could block forever in eeor mode.
b) We were incorrectly using the sysctl vs the calculated value. This
causes us to block forever if the addmore theshold is larger than
then the socket buffer size.
- If we send EXACTLY the size left in the send buffer
and then send again, we end up with exactly 0 bytes and
don't hit the pre-block code to wait for more space.
- If we fall into the loop with our max_len == 0 (the bug
above) we then call in to copy out the data, setup the length
of the waiting to transmit data to 0 and call the mbuf copy routine
which 0 indicates copy all the data to the mbuf chain.. which it
does. This then leaves a "stuck" message on the stream queue with
its size exactly 0 bytes but all the data there and thus nothing
left in the uio structure. We then reach a stuck forever state
never being able to send data.
control logic and policy registration remaining in that file, and access
control checks broken out into other files by class of check.
Obtained from: TrustedBSD Project
The cn_unit and cn_tp fields don't seem to be used anywhere. Some
drivers set them, while others don't. Just remove them, in an attempt to
make our consdev code a little easier to understand.
certain ATA-6 drives including CF cards.
The IDE geometry of the PC98 is calculated from the drive capacity.
In addition to the algorithm in NEC BIOS, a variety of algorithms are
provided by 3'rd party boards and BIOS hacks. This change has
implemented the three algorithms: IDE BIOS compatible mode, SCSI BIOS
compatible mode and same way as the previous version. The tunable
machdep.ad_geom_method selects the algorithm.
I have been using this change for a year with CF cards.
Reminded by: nyan
Due to the nature of the beast it causes lot of unproductive overhead. This
is especially bad when running SMP kernel on VMWare with several virtual
processors - idle FreeBSD guest with SMP kernel takes 150% host CPU time on my
dual-core MacBook Pro when I am enabling two virtual CPUs, making even host
not very usable. Detect when we are running in the sandbox and reduce HZ
to 10 (can be adjusted via VM_HZ in the kernel config) in such cases. This
brings host CPU usage of idle FreeBSD/SMP on two virtual processors down
to 10%.
Detect most popular VM platforms out there - VMWare, Parallels, VirtualBox
and VirtualPC.
MFC after: 2 weeks
to set the initial PIO mode instead of assuming PIO4. There are still a few
nagging issues:
- There are some problems with 64 K DMA transfers waiting on lower level
changes.
- ATAPI DMA is broken on Marcel's Mac Mini because we need an ATA SELECT hook
propagated up to individual drivers for hardware without timing registers for
each ATA channel.
fragment reassembly queues.
This allows policies to label reassembly queues, perform access
control checks when matching fragments to a queue, update a queue
label when fragments are matched, and label the resulting
reassembled datagram.
Obtained from: TrustedBSD Project
sooner to decomplicate locking and eliminate the need for a rather
chatty comment about why we have to handle the global lock in a
special way for the benefit of ipfw and pf cred rules.
MFC after: 3 days
(unless explicitly locked to mode 11b) so when we join the bss the
channel attached to the scan cache entry may need to be demoted.
o demote to 11b if the ap is advertising 11b rates
o skip the ap if it's 11b but we're locked to 11g (could consider this
advisory but for now treat it as mandatory)
o handle an odd edge case, if there is a fixed transmit rate for 11g
then the rate check against the 11b ap will fail, try to demote to
11b and retry the rate check
Reviewed by: sephe, thompsa
G3 as well as the internal ADB keyboard and mice in PowerBooks and iBooks. This
also brings in Mac GPIO support, for which we should eventually have a better
interface.
Obtained from: NetBSD (CUDA and PMU drivers)
- Consistently add parentheses to return statements.
- Use NULL instead of 0 when comparing pointers, also avoiding
unnecessary casts.
- Do not use pointers as booleans.
Reviewed by: rwatson (earlier version)
MFC after: 2 months
the net80211 layer has complete control over the handling of mgt frames
(in particular, the ac, tx rate, and retry count); this also allows us
to purge the M_LINK0 flag that was attached to mbufs to mark them as
needing encryption for shared key auth
o change ieee80211_send_setup to take a tid parameter so it can be used
to setup QoS frames
o correct BAR frame construction for AMPDU
o retransmit BAR frames until ACK'd or timeout (use tunables to
control behaviour, default is very aggressive)
o defer seq# update until BAR frame is ACK'd
o add BAR response handling callback for driver to interpose and
push new state to device or push pending aggregates
While here also:
o add backpointer to node in the per-tid tx aggregation data structure
o move ampdu tx state setup/teardown work to separate functions
o yank useless code for setting fixed rate through media opts: this
mechanism didn't scale to HT rates and couldn't handle multiple bands;
fixed tx rates are set with the IEEE80211_IOC_TXPARAMS ioctl
are possibly still being created. The d_secperunit field
contains the number of sectors of the disk and not of the
slice/partition to which the disklabel applies.
Rather than reject the disklabel, we now silently adjust
the field. Existing code, like bslabel(8), does not seem
to check the label that extensively and seems to adjust
fields as a side-effect as well.
In other words, it's not that important apparently, so
gpart should not be too strict about it.
Reported by: nyan@
Reported by: Andriy Gapon <avg@icyb.net.ua>
Olaf Kirch noticed that the i915_set_status_page() function of the i915
kernel driver calls ioremap with an address offset that is supplied by
userspace via ioctl. The function zeroes the mapped memory via memset
and tells the hardware about the address. Turns out that access to that
ioctl is not restricted to root so users could probably exploit that to
do nasty things. We haven't tried to write actual exploit code though.
It only affects the Intel G33 series and newer.
Approved by: bz (secteam)
Obtained from: Intel drm repo
Security: CVE-2008-3831
Memory Interface (CFI). The flash memory can be read and written
to through /dev/cfi# and an ioctl() exists so processes can read
the query information.
The driver supports the AMD and Intel command set, though only
the AMD command has been tested.
Obtained from: Juniper Networks, Inc.
established a valid link or not.
In rl_start_locked, don't try to send packets unless we have valid
link. While I'm here add a check that verifies whether driver can
accept Tx requests by inspecting IFF_DRV_OACTIVE/IFF_DRV_RUNNING
flag.
- The hardware does not support DAC so limit DMA address space to
4GB.
- Removed BUS_DMA_ALLOC_NOW flag.
- Created separated Tx buffer and Rx buffer DMA tags. Previously
it used to single DMA tag and it was not possible to specify
different DMA restrictions.
- Apply 4 bytes alignment limitation of Tx buffer.
- Apply 8 bytes alignment limitation of Rx buffer.
- Tx side bus_dmamap_load_mbuf_sg(9) support.
- Preallocate Tx DMA maps as creating DMA maps take very long time
on architectures that require real DMA maps.
- Adjust guard buffer size to 1522 + 8 as it should include VLAN
and additional reserved bytes in Rx buffer.
- Plug memory leak in device detach. Previously wrong buffer
address was used to free allocated memory.
- Added rl_list_rx_init() to clear Rx buffer and cleared the
buffer.
- Don't destroy DMA maps in rl_txeof() as the DMA map should be
reused. There is no reason to destroy/recreate the DMA maps in
this driver.
- Removed rl_dma_map_rxbuf()/rl_dma_map_txbuf() callbacks.
- The hardware does not support descriptor based DMA on Tx side
and the Tx buffer address should be aligned on 4 bytes boundary
as well as manual padding for short frames. Because of this
hardware limitation rl(4) always used to invoke m_defrag(9) to
get a 4 bytes aligned single buffer. However m_defrag(9) takes
a lot of CPU cycles on slow machines and not all packets need
the help of m_defrag(9). Armed with the information, don't
invoke m_defrag(9) if the following conditions are true.
1. Buffer is not fragmented.
2. Buffer is aligned on 4 bytes boundary.
3. Manual padding is not necessary.
4. Or padding is necessary but upper stack passed a writable
buffer and the space needed for padding is satisfied.
This change combined with preallocated DMA maps greatly
increased Tx performance of driver on sparc64.
- Moved bus_dmamap_sync(9) in rl_start_locked() to rl_encap() and
corrected memory synchronization operation specifier of
bus_dmamap_sync(9).
- Removed bus_dmamap_unload(9) in rl_stop(). There is no need to
reload/unload Rx buffer as rl(4) always have to copy from the
buffer. It just needs proper bus_dmamap_sync(9) calls before
copying the received frame.
With this change rl(4) should work on systems with more than 4GB
memory.
PR: kern/128143
with several points unappropriate for the present parser. This patch
disables input-to-output analog monitoring but instead fixes recording.
Tested by Tobias Grosser on ThinkPad T61p.
might make Qualcomm and Option cards (which have all endpoints in 1
interface) work.
- Change the USB buffer sizes to depend on the transfer speed. With UMTS
we use a buffer 384k / 1000 frames/sec * 50msecs =~ 15kB for example.
- Add a MODULE_VERSION statement
when thread is in kernel mode, it can cause dead loop, now unlock
process lock after acquired sleep queue lock and thread lock to
avoid the problem. This means TDF_NEEDSIGCHK and TDF_NEEDSUSPCHK must
be set with process lock and thread lock being hold at same time.
but I inadvertently overwrote the change when I synced to git. Commit
the fix in both places, so this doesn't happen again.
Approved by: jhb (mentor)
MFC after: 2 weeks
This update fixes a transmit bug in the multi-queue (MSI-X) firmware
which happens when RDMAs complete out of order, and provides
improved support for the new Myri10GE NIC models (10G-PCIE-8Bx)
Sponsored by: Myricom Inc.
MFC after:3 days
With our new TTY layer we use a two step device destruction procedure.
The TTY first gets abandoned by the device driver. When the TTY layer
notices all threads have left the TTY layer, it deallocates the TTY.
This means that the device unit number should not be reused before a
callback from the TTY layer to the device driver has been made. newbus
doesn't seem to support this concept (yet), so right now just add a
destructor with a big comment in it. It's not ideal, but at least it's
better than panicing.
Reported by: rnoland
unnecessary, the normal process lock and thread lock are enough. The
spin lock is still needed for process and thread exiting to mimic
single sched_lock.
machine arm
device mem
device uart_ns8250
options GEOM_BSD
options GEOM_MBR
Remove the first three from all kernel configuration files
(sometimes commented-out) and change geom_bsd and geom_mbr
from standard to optional.
machine arm
device mem
options GEOM_BSD
options GEOM_MBR
Remove the first two from all kernel configuration files and
change geom_bsd and geom_mbr from standard to optional.
rest in kern_getdirentries(). Use kern_getdirentries() to implement
freebsd32_getdirentries(). This fixes a bug where calls to getdirentries()
in 32-bit binaries would trash the 4 bytes after the 'long base' in
userland.
Submitted by: ups
MFC after: 1 week
Driver supports PCI devices with class 8 and subclass 5 according to
SD Host Controller Specification.
Update NOTES, enable module and static build.
Enable related mmc and mmcsd modules build.
Discussed on: mobile@, current@
other fixes:
- Add pointers back to device_t objects in softc structures instead
of storing the unit and using devclass_get_device().
- Add 'lpbb', 'pcf', 'pps', and 'vpo' child devices to every 'ppbus' device
instead of just the first one.
- Store softc pointers in si_drv1 of character devices instead of
pulling the unit number from the minor number and using
devclass_get_softc() and devclass_get_device().
- Store the LP_BYPASS flag in si_drv2 instead of encoding it in the minor
number.
- Destroy character devices for lpt(4) when detaching the device.
- Use bus_print_child_footer() instead of duplicating it in
ppbus_print_child() and fix ppbus_print_child()'s return value.
- Remove unused AVM ivar from ppbus.
- Don't store the 'mode' ivar in the ppbus ivars since we always fetch it
from the parent anyway.
- Try to detach all the child devices before deleting them in
ppbus_detach().
- Use pause() instead of a tsleep() on a dummy address when polling the
ppbus.
- Use if_printf() and device_printf() instead of explicit names with unit
numbers.
Silence on: current@
but is not used anymore. This define is not referenced by anything
in the FreeBSD srcs nor google shows any usage. Kernel and world
builds fine without it.
Approved by: kib (mentor)
- If there aren't spinlocks held, but there are problems with old
sleeplocks, they are not reported.
- If the spinlock found is not the only one, problems are not reported.
Fix these 2 problems.
Reported by: tegge
already (but probably had been way above as the code was there twice)
and describe what was last changed in rev. 1.199 there (which now is
in sync with in6_src.c r184096).
Pointed at by: mlaier
MFC after: 2 mmonths
ephemeral port allocation as implemented in netinet/in_pcb.c rev. 1.143
(initially from OpenBSD) and follow-up commits during the last four and
a half years including rev. 1.157, 1.162 and 1.199.
This now is relying on the same infrastructure as has been implemented
in in_pcb.c since rev. 1.199.
Reviewed by: silby, rpaulo, mlaier
MFC after: 2 months
and ffs_lock. This cannot catch situations where holdcnt is incremented
not by curthread, but I think it is useful.
Reviewed by: tegge, attilio
Tested by: pho
MFC after: 2 weeks
MNTK_UNMOUNT before, and mnt_mtx is used as interlock. vfs_busy() always
tries to obtain a shared lock on mnt_lock, the other user is unmount who
tries to drain it, setting MNTK_UNMOUNT before.
Reviewed by: tegge, attilio
Tested by: pho
MFC after: 2 weeks
Export the active and bootable flags as attributes in
the configuration XML and allow them to be manipulated
with the set/unset commands.
Since libdisk treats the flags as part of the partition
type, preserve behavior by keeping them included in the
configuration text.
realtimer_expire() to not rearm the timer, otherwise there is a chance
that a callout will be left there and be tiggered in future unexpectly.
Bug reported by: tegge@
not the string formatted at the time of CTRX() call. Stack_ktr(9) uses
an on-stack buffer for the symbol name, that is supplied as an argument
to ktr. As result, stack_ktr() traces show garbage or cause page faults.
Fix stack_ktr() by using pointer to module symbol table that is supposed
to have a longer lifetime.
Tested by: pho
MFC after: 1 week
It is required for async cancellation to work.
Fix PROC_LOCK leak in linux_tgkill when signal delivery attempt is made
to not linux process.
Do not call em_find(p, ...) with p unlocked.
Move common code for linux_tkill() and linux_tgkill() into
linux_do_tkill().
Change linux siginfo_t definition to match actual linux one. Extend
uid fields to 4 bytes from 2. The extension does not change structure
layout and is binary compatible with previous definition, because i386
is little endian, and each uid field has 2 byte padding after it.
Reported by: Nicolas Joly <njoly pasteur fr>
Submitted by: dchangin
MFC after: 1 month
- fix bugs where we would:
- try to map the hypervisors address space
- accidentally kick out an existing kernel mapping for some domain creation memory allocation sizes
- accidentally skip a 2MB kernel mapping for some domain creation memory allocation sizes
- don't rely on trapping in to xen to read rcr2, reference through vcpu
- whitespace cleanups
Erase operation gives card's logic information about unused areas to help it
implement wear-leveling with lower overhead comparing to usual writing.
Erase is much faster then write and does not depends on data bus speed.
Also as result of hitting in-card write logic optimizations I have measured
up to 50% performance boost on writing undersized blocks into preerased areas.
At the same time there are strict limitations on size and allignment of erase
operations. We can erase only blocks aligned to the erase sector size and
with size multiple of it. Different cards has different erase sector size
which usually varies from 64KB to 4MB. SD cards actually allow to erase
smaller blocks, but it is much more expensive as it is implemented via
read-erase-write sequence and so not sutable for the BIO_DELETE purposes.
Reviewed by: imp@
be given when the user has enabled it). (Michael Tuexen)
- Sack Immediately was not being set properly on the actual chunk, it
was only put in the rcvd_flags which is incorrect. (Michael Tuexen)
- added an ifndef userspace to one of the already present macro's for
inet (Brad Penoff)
Obtained from: Michael Tuexen and Brad Penoff
MFC after: 4 weeks
credentials from inp_cred which is also available after the
socket is gone.
Switch cr_canseesocket consumers to cr_canseeinpcb.
This removes an extra acquisition of the socket lock.
Reviewed by: rwatson
MFC after: 3 months (set timer; decide then)
(still a power of 2) rather than 63k transfers. Even with 63k transfers
some machines (such as Dell SC1435's) were experiencing chronic data
corruption.
- Use the MIO method to talk to the Serverworks HT1000_S1 SATA controller
like all the other SATA controllers rather than the compat PATA
method. This lets the controller see all 4 SATA ports and also
matches the behavior of the Linux driver.
Silence from: sos
MFC after: 3 days
bank instead of copper/fiber bank which in turn resulted in
wrong registers were accessed during PHY operation. It is
believed that page 0 should be used for copper PHY so reinitialize
E1000_EADR to select default copper PHY.
This fixes link establishment issue of nfe(4) on Sun Fire X4140.
OpenBSD also has similimar patch but they just reset the E1000_EADR
register to page 0. However some Marvell PHYs((88E3082, 88E1000)
don't have the extended address register and the meaning of the
register is quite different for each PHY model. So selecting copper
PHY is limited to 88E1149 PHY which seems to be the only one that
exhibits link establishment problem. If parent device know the type
of PHY(either copper or fiber) that information should be notified
to PHY driver but there is no good way to pass this information yet.
Reported by: thompsa
Reviewed by: thompsa
PCPU_PTR() curthread can migrate on another CPU and get incorrect
results.
- Fix a similar race into witness_warn().
- Fix the interlock's checks bypassing by correctly using the appropriate
children even when the lock_list chunk to be explored is not the first
one.
- Allow witness_warn() to work with spinlocks too.
Bugs found by: tegge
Submitted by: jhb, tegge
Tested by: Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
the Sierra and Novatel devices, ignore all umass devices and hide the umass
devices that represent the CD ROM devices (but not the SD card slot in the
Huawei Mobile dongle).
Note: This driver in FBSD7 seems to suffer from memory corruption when used
with an Option GT Quad. The E220 however works flawlessly.
Also add the ID for the Option GTMaxHSUPA, provided by Olivier Fromme.
Read the other way round this means that even with the checks
the m_len turned negative in some cases which led to panics.
The reason to my understanding seems to be that the checks are wrong
(also for v4) ignoring possible padding when checking cmsg_len or
padding after data when adjusting the mbuf.
Doing proper cheks seems to break applications like named so
further investigation and regression tests are needed.
PR: kern/119123
Tested by: Ashish Shukla wahjava gmail.com
MFC after: 3 days
- Change the ddb(4) commands to be more useful (by thompsa@):
- `show ttys' is now called `show all ttys'. This command will now
also display the address where the TTY data structure resides.
- Add `show tty <addr>', which dumps the TTY in a readable form.
- Place an upper bound on the TTY buffer sizes. Some drivers do not want
to care about baud rates. Protect these drivers by preventing the TTY
buffers from getting enormous. Right now we'll just clamp it to 64K,
which is pretty high, taking into account that these buffers are only
used by the built-in discipline.
- Only call ttydev_leave() when needed. Back in April/May the TTY
reference counting mechanism was a little different, which required us
to call ttydev_leave() each time we finished a cdev operation.
Nowadays we only need to call ttydev_leave() when we really mark it as
being closed.
- Improve return codes of read() and write() on TTY device nodes.
- Make sure we really wake up all blocked threads when the driver calls
tty_rel_gone(). There were some possible code paths where we didn't
properly wake up any readers/writers.
- Add extra assertions to prevent sleeping on a TTY that has been
abandoned by the driver.
- Use ttydev_cdevsw as a more reliable method to figure out whether a
device node is a real TTY device node.
Obtained from: //depot/projects/mpsafetty/...
Reviewed by: thompsa
this eliminates some problems of locking, e.g, a thread lock is needed
but can not be used at that time. Only the process lock is needed now
for new field.
o better quality of the movement smoothing
o more features such as tap-hold and virtual scrolling
Support must still be enabled with this line in your /boot/loader.conf:
hw.psm.synaptics_support="1"
The following sysctls were removed:
hw.psm.synaptics.low_speed_threshold
hw.psm.synaptics.min_movement
hw.psm.synaptics.squelch_level
An overview of this new driver and a short documentation about the added
sysctls is available on the wiki:
http://wiki.freebsd.org/SynapticsTouchpad
simplifies certain device attachments (Kauai ATA, for instance), and makes
possible others on new hardware.
On G5 systems, there are several otherwise standard PCI devices
(Serverworks SATA) that will not allow their interrupt properties to be
written, so this information must be supplied directly from Open Firmware.
Obtained from: sparc64
This uses the common U-Boot support lib (sys/boot/uboot, already used on
FreeBSD/powerpc), and assumes the underlying firmware has the modern API for
stand-alone apps enabled in the config (CONFIG_API).
Only netbooting is supported at the moment.
Obtained from: Marvell, Semihalf
FreeBSD 8-CURRENT was tested and run successfully on the following eval
boards and devices :
* DB-88F5182, DB-88F5281 (Orion based)
* DB-88F6281, RD-88F6281 (Kirkwood based)
* DB-78100 (Discovery based)
For more detailed info on build instructions and other examples please refer
to http://wiki.freebsd.org/FreeBSDMarvell
Obtained from: Marvell, Semihalf
user-mode pointers. Change types used in the structures definitions to
properly-sized architecture-specific types.
Submitted by: dchagin
MFC after: 1 week
This supports 1Gbps Ethernet engine found on ARM-based SOCs (Orion, Kirkwood,
Discovery), as well as on system controllers for PowerPC processors (MV64430,
MV6446x).
The following advanced features are supported:
- multicast
- VLAN tagging
- IP/TCP/UDP checksum calculation offloading
- polling
- interrupt coalescing
Obtained from: Marvell, Semihalf
the last byte of the ethernet address was not read which in turn
resulted in getting 5 out of the 6 bytes of ethernet address and
always returned ENOENT. I did not notice the bug on FPGA version
because of additional configuration data in EEPROM.
Pointed out by: bouyer at NetBSD
example the Huawei Mobile has an SD card slot on the second interface.
- Do not attach to Qualcomm and Novatel cards. If ignored these cards will
switch to modem mode automatically it seems.
- Reduce the priority on generic attachment to the appropriate level.
Note: A better solution is to send an eject command straightaway, but that can
be left till later.
* Orion
- 88F5181
- 88F5182
- 88F5281
* Kirkwood
- 88F6281
* Discovery
- MV78100
The above families of SOCs are built around CPU cores compliant with ARMv5TE
instruction set architecture definition. They share a number of integrated
peripherals. This commit brings support for the following basic elements:
* GPIO
* Interrupt controller
* L1, L2 cache
* Timers, watchdog, RTC
* TWSI (I2C)
* UART
Other peripherals drivers will be introduced separately.
Reviewed by: imp, marcel, stass (Thanks guys!)
Obtained from: Marvell, Semihalf
The physical page which we clear is accessed via additional temp kernel
mapping for the period of zeroing operation. However in systems with virtual
d-cache (most ARMs) when write-allocate feature is enabled, we can have
modified but unflushed content pertaining to this physical page still in the
d-cache due to its primary (pre-existing) mapping. In such scenario that
cached content upon flush is likely to overwrite [portions of] the physical
page we want to zero here..
This is a general problem with multiple virtual mappings covering the same
physical page with write-allocate and virtual d-cache: there is inherent
potential for corruptions of this kind, which are not easily resolved; it is
best policy that such multiple mappings be not allowed.
Obtained from: Marvell, Semihalf
will ease the identification of memory leaks as the OS will be able to track
allocations for us by malloc type. vmstat -m will show all of the
allocations.
Convert the calls to drm_alloc() and friends, which are used in shared code
to static __inline__ while we are here.
Approved by: jhb (mentor)
from operating on a list with a single item. This code is used much more by
the i915 driver with xorg-7.4. Correct it to match the actual linux
implementation.
Approved by: jhb (mentor)
busmastering support. This also adds register definitions for MSI support,
which we will be using shortly.
Approved by: jhb (mentor)
Obtained from: drm git master
macio's enable-enet word, which apparently does nothing on some machines,
open an OF instance of the ethernet controller. This fixes cold booting
from disk on my Blue & White G3.
MFC after: 3 days
Diff minimization against ldscript.mips.
Note: CFE will not load PT_DYNAMIC segments, therefore the dynamic
sections have been placed in a PT_LOAD segment for now. This is not
too efficient in terms of memory use, they should probably get
placed in the text segment.
device id is JMC260 family. Previously it just verified the deivce
is JMC260 Rev A0. This will make it easy for newer JMC2xx support.
Pointed out by: bouyer at NetBSD
controllers and it seems to work just fine with at least an
add-on SAS3080X. While at it, remove the commented out ncr(4)
as it doesn't even use bus_dma(9), which isn't worth fixing
though as sym(4) already supports a superset of the controllers
driven by ncr(4).
In particular following functions KPI results modified:
- bufobj_invalbuf()
- bufsync()
and BO_SYNC() "virtual method" of the buffer objects set.
Main consumers of bufobj functions are affected by this change too and,
in particular, functions which changed their KPI are:
- vinvalbuf()
- g_vfs_close()
Due to the KPI breakage, __FreeBSD_version will be bumped in a later
commit.
As a side note, please consider just temporary the 'curthread' argument
passing to VOP_SYNC() (in bufsync()) as it will be axed out ASAP
Reviewed by: kib
Tested by: Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
designed drivers would never hit, but was exposed in diving into
another problem...
When expanding the devclass array, free the old memory after updating
the pointer to the new memory. For the following single race case,
this helps:
allocate new memory
copy to new memory
free old memory
<interrupt> read pointer to freed memory
update pointer to new memory
Now we do
allocate new memory
copy to new memory
update pointer to new memory
free old memory
Which closes this problem, but doesn't even begin to address the
multicpu races, which all should be covered by Giant at the moment,
but likely aren't completely.
Note: reviewers were ok with this fix, but suggested the use case
wasn't one we wanted to encourage.
Reviewed by: jhb, scottl.
This was located in the ubsa driver, but should be moved into a separate
driver:
- 3G modems provide multiple serial ports to allow AT commands while the PPP
connection is up.
- 3G modems do not provide baud rate or other serial port settings.
- Huawei cards need specific initialisation.
- ubsa is for Belkin adapters, an Linuxy choice for another device like 3G.
Speeds achieved here with a weak signal at best is ~40kb/s (UMTS). No spooky
STALLED messages as well.
Next: Move over all entries for Sierra and Novatel cards once I have found
testers, and implemented serial port enumeration for Sierra (or rather have
Andrea Guzzo do it). They list all endpoints in 1 iface instead of 4 ifaces.
Submitted by: aguzzo@anywi.com
MFC after: 3 weeks
avoid being picked up by the DTrace fbt provider.
This is called by __udivdi3() for doing 64bit division on a 32bit arch and may
be called from within the dtrace context causing a double fault.
have in common right now is a memset. This saves a parameter to
these routines, as well as a level of indentation.
o Make mmc_get_bits a little clearer... It really only works on 128-bit
registers right now.
reduce ABI disruptions when new cpu types and new PMC events are added
in the future.
- Support alternate spellings for PMC events. Derive the canonical
spelling of an event name from its enumeration name in 'enum pmc_event'.
- Provide a way for users to disambiguate between identically named events
supported by multiple classes of PMCs in a CPU.
- Change libpmc's machine-dependent event specifier parsing code to
better support CPUs containing two or more classes of PMC resources.
If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in.
However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries:
atacore: ATA core functionality, always needed for any ATA setup
atacard: CARDBUS support
atacbus: PC98 cbus support
ataisa: ISA bus support
atapci: PCI bus support only generic chipset support.
ataahci: AHCI support, also pulled in by some vendor modules.
ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia; Vendor support, ie atavia for VIA chipsets
atadisk: ATA disk driver
ataraid: ATA softraid driver
atapicd: ATAPI cd/dvd driver
atapifd: ATAPI floppy/flashdisk driver
atapist: ATAPI tape driver
atausb: ATA<>USB bridge
atapicam: ATA<>CAM bridge
This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file:
device atacore
device atapci
device atavia
And then you need the atadisk, atapicd etc lines in there just as usual.
If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual.
However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
have_interp to TRUE. This allows the code in image activator to try
/libexec/ld-elf.so.1 as interpreter when newinterp is not found to
execute.
Reviewed by: peter
MFC after: 2 weeks (together with r175105)
Use mbuf tagging for accounted packets to not account packets twice when
both ingress and egress netflow enabled.
To keep compatibility new "setconfig" message added to control new
functionality. By default node works as before, doing only ingress
accounting without using mbuf tags.
Reviewed by: glebius
descriptor pointer in unp_freerights: we can no longer recurse into
unp_gc due to unp_gc being invoked in a deferred way, but it's still
a good idea.
MFC after: 3 days
no data is ready, return 0 rather than blocking or returning EAGAIN.
This is consistent with the behavior of soreceive_generic (soreceive)
in earlier versions of FreeBSD, and restores this behavior for UDP.
Discussed with: jhb, sam
MFC after: 3 days
bring in FIXUP_BOOT_DRV functionality as an #ifdef. This is not
enabled at this time, and the md5 remains constant with this change.
Apart from the 'accept any partitioning scheme on the device' changes,
this was the biggest delta...
# and yes, we'll merge these into one source file if we can do that in a
# way that makes sense.
Obtained from: sys/boot/arm/ixp425/boot2/boot2.c
boot an amd64 kernel. If not, then fail the boot request with an error
message. Otherwise, the boot attempt will fail with a BTX fault when
trying to read the EFER MSR.
MFC after: 3 days
improperly invoking sosend(), soreceive(), and sopoll() instead of
attach either specialized or _generic() versions of those functions
to their pru_sosend, pru_soreceive, and pru_sopoll protosw methods.
MFC after: 3 days
netisr or ithread's socket buffer size limit is not the right limit to
use. Instead, pass NULL as the other two calls to sbreserve_locked()
in the TCP input path (tcp_mss()) do.
In practice, this is a no-op, as ithreads and the netisr run without a
process limit on socket buffer use, and a NULL thread pointer leads to
not using the process's limit, if any. However, if tcp_input() is
called in other contexts that do have limits, this may prevent the
incorrect limit from being used.
MFC after: 3 days
can reliably provoke data corruption on systems equipped with a
plenty of memory during high load.
Reported by: gnn via iXsystems
MFC candidate: RELENG_7_1, RELENG_7
code. Added a copyright for the work I did to this file a couple of
years ago. Add John's copyright too, since I'm sure I'll be pulling
more into this code. This also implements a new -n option to not
allow breaking into the boot sequence which was original in the patch
John posted (not in the original i386 code I based this boot2.c on,
only the name is the same). I haven't checked to see if he did that,
or if it was one of Sam's improvements.
Submitted by: jhay@
single stepped the process to the system call), we need to clear
the trap flag from the new frame. Otherwise, the new thread will
receive a (likely unexpected) SIGTRAP when it executes the first
instruction after returning to userland.
booting from an MFS root (e.g. from an install CD) firmware_mountroot
can be called twice with the second call happening before the task
callback occurs; this results in the task structure contents being
corrupted because it was declared static.
Submitted by: marius (original version)
syscalls expect the bitmap size in the range from 32 to 128. Old glibc
always assumed size 1024, while newer glibc searches for approriate
size, starting from 1024 and going up.
For now, use FreeBSD size of cpuset_t for bitmap size parameter and
return EINVAL if length of user space bitmap less than our size of
cpuset_t.
Submitted by: dchagin
MFC after: 1 week
[This requires MFC of the actual linux affinity syscalls]
This means that inp_cred is always there, even after the socket
has gone away. It also means that it is constant for the lifetime
of the inp.
Both facts lead to simpler code and possibly less locking.
Suggested by: rwatson
Reviewed by: rwatson
MFC after: 6 weeks
X-MFC Note: use a inp_pspare for inp_cred
We don't explicity check for error here and M_WAITOK will just put the
process to sleep waiting on resources to become available.
Suggested by jhb@
Approved by: jhb (mentor)
sbuf instead of doing uiomove. This allows for reads from non-zero
offsets to work.
Patch is forward-ported des@' one, and was adopted to current code
by dchagin@ and me.
Reviewed by: des (linprocfs part)
PR: kern/101453
MFC after: 1 week
- extend ub_dev_read() and ub_dev_recv() so that the actual len and
all error codes can be passed and processed properly; unify behaviour of
these routines
- introduce syscall general error code (API_ESYSC)
in GENERIC and LINT. [1]
- Rename hpt_dbg_level to hpt_iop_dbg_level to avoid multiple definition
of hpt_dbg_level (hptmv also has hpt_dbg_level).
PR: 127551 [1]
Reviewed by: scottl@
MFC after: 1 month
NDIS_TXPKTS and don't allocate unused extra spaces for sc->ndis_txarray
and sc->ndis_txpool.
PR: kern/127644
Submitted by: Antoine Pelisse <apelisse_at_gmail.com>
MFC after: 1 week
This reverts a private patch which is causing issues with many Intel chipsets.
I will review that patch and see what we need to do to fix it up later, but
for the time being, we will just get these chips working again.
This update contains a lot of code cleanup and is post gem merge
(no, we don't have gem support). It should prove much easier to read the
code now. A lot of thanks goes to vehemens for that work. I have adapted
the code to use cdevpriv for tracking per open file data. That alleviates
the old ugly hack that we used to try and accomplish the task and helped to
clean up the open / close behavior a good bit. This also replaces the hack
that was put in place a year or so ago to prevent radeons from locking up
with AIGLX enabled. I have had a couple of radeon testers report that it
still works as expected, though I no longer have radeon hardware to test with
myself. Other various fixes from the linux crew and Intel, many of
which are muddled in with the gem merge.
Approved by: jhb (mentor)
Obtained from: mesa/drm git master
MFC after: 2 weeks
- Staticize and locally prototype functions uipc_ctloutput(), unp_dispose(),
unp_init(), and unp_externalize(), none of which have been required
outside of uipc_usrreq.c since uipc_proto.c was removed.
- Remove stale prototype for uipc_usrreq(), which has not existed in the
code since 1997
- Forward declare and staticize uipc_usrreqs structure in uipc_usrreq.c and
not un.h.
- Comment on why uipc_connect2() is still non-static -- it is used directly
by fifofs.
- Remove stale comments, tidy up whitespace.
MFC after: 3 days (where applicable)
For the jail case we are already looping over the interface addresses
before falling back to the only IP address of a jail in case of no
match. This is in preparation for the upcoming multi-IPv4/v6/no-IP
jail patch this change was developed with initially.
This also changes the semantics of selecting the IP for processes within
a jail as it now uses the same logic as outside the jail (with additional
checks) but no longer is on a mutually exclusive code path.
Benchmarks had shown no difference at 95.0% confidence for neither the
plain nor the jail case (even with the additional overhead). See:
http://lists.freebsd.org/pipermail/freebsd-net/2008-September/019531.html
Inpsired by a patch from: Yahoo! (partially)
Tested by: latest multi-IP jail patch users (implictly)
Discussed with: rwatson (general things around this)
Reviewed by: mostly silence (feedback from bms)
Help with benchmarking from: kris
MFC after: 2 months
SRCDIR is seeded from `pwd` which not only means src/sys/ but
also src/include/ (and possibly src/usr.sbin/amd/include/ ?).
Trying to build world resulted in
===> include (includes)
cd /usr/src/include; make buildincludes; make installincludes
creating osreldate.h from newvers.sh
cd: can't cd to /usr/src/include/sys
*** Error code 2
as there is apparently no src/include/sys.
There are multiple possible solutions ranging from seeding SRCDIR from
the environment to adding more substitution patterns.
Reported by: sam, bz
Proper solution to be implemented and tested by: peter
This changes from a line discipline to the tty_hooks mechanism. Data will come
in directly via rint_bypass and sent to the peer node in a single mbuf.
As line disciplines are no longer used a new netgraph command called
NGM_TTY_SET_TTY is used to attach the tty. This takes a pointer to to the open
file descriptor of the tty and registers the tty hooks. When the tty disappears
the node will shutdown.
Thanks to: ed
Sponsored by: Hobnob, Inc
obtained from Linux forcedeth driver.
While I'm here move creating a sysctl node for process_limit to
function nfe_sysctl_node().
Tested by: "Arno J. Klaassen" < arno <at> heho dot snv dot jussieu dot fr >
g33 based chips use a different method of identifying the gtt size.
g45 based chips gtt is located in a different area of stolen memory.
Approved by: jhb (mentor)
MFC after: 2 weeks
added in FreeBSD 6.x to break the binary layout of the data structure
during a conversion to C99 sparse structure initialization. Probably
should have been removed before 7.0, but 8.0 will do.
from the vimage project, as per plan established at devsummit 08/08:
http://wiki.freebsd.org/Image/Notes200808DevSummit
Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator
macros, and CURVNET_SET() context setting macros, all currently
resolving to NOPs.
Prepare for virtualization of selected SYSCTL objects by introducing a
family of SYSCTL_V_*() macros, currently resolving to their global
counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT().
Move selected #defines from sys/sys/vimage.h to newly introduced header
files specific to virtualized subsystems (sys/net/vnet.h,
sys/netinet/vinet.h etc.).
All the changes are verified to have zero functional impact at this
point in time by doing MD5 comparision between pre- and post-change
object files(*).
(*) netipsec/keysock.c did not validate depending on compile time options.
Implemented by: julian, bz, brooks, zec
Reviewed by: julian, bz, brooks, kris, rwatson, ...
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
to store the socket address stored in the first mbuf in a packet chain.
This reduces contention on the lock and CPU system time in certain UDP
workloads.
Tested by: ps
Reviewed by: rwatson
MFC after: 1 week
It turns out I overlooked some function prototypes that were actually
TTY related, but were stored in <sys/conf.h> to implement the D_TTY
flag. Remove these prototypes now that they don't exist anymore.
- Support for Myricom 10G-PCIE-8B NICs
- multi-slice firmware: fix a bug when the presence of 32-bit or
64-bit DMA addresses for interrupt queues and data is not uniform across
slices.
- Improves automatic selection between ethp_z8e/eth_z8e
Sponsored by: Myricom Inc.
the gvinum header in fields of fixed size and in a big endian byte order
rather than the size and byte order of the actual platform.
Note that the change is backwards compatible with the old gvinum configuration
format, but will save the configuration in the new format when the 'saveconfig'
command is executed.
Submitted by: Rick C. Petty <rick-freebsd -at- kiwi-computer.com>
- Update or remove comments that were left over from the original
soreceive_generic() implementation. Quite a few were misleading in the
context of the new code.
- Since soreceive_dgram() has a simpler structure, replace several gotos
with a while loop making the invariants more clear.
- In the blocking while loop, don't try to handle cases incompatible with
the loop invariant (since m is always NULL, don't check for and handle
non-NULL).
- Don't drop and re-acquire the socket buffer lock unnecessarily after
sbwait() returns, which may help reduce lock contention (etc).
- Assume PR_ATOMIC since we assert it at the top of the function.
MFC after: 3 days
with kernel_map->system_mtx held so these aren't needed. Add an
assertion to make sure this is the case.
Also, fix a minor style(9) nit.
Reviewed by: alc@
- simplify page hold logic
- allow pages for processes other than that of curthread to
have pages held
- normalize the interface to more closely resemble the functions in
sys/vm
MFC after: 1 week
belongs solely to the driver.
We don't lose any statistics with this change, because in a error
case the drop counter on the interface output queue is always incremented.
Reviewed by: thompsa
only mode and restore original value of extended address register
instead of overwriting it with page 1. There are still instance
information passing issue(e.g configured media type: fiber or
copper) from driver to PHY layer but this change make the selected
PHY work with 88E1112 PHY.
Reported by: Krzysztof Jedruczyk < beaker <at> hot dot pl >
Tested by: Krzysztof Jedruczyk < beaker <at> hot dot pl >
This should fix occasional Tx checksum corruption issue.
Reported by: Garrett Cooper < yanefbsd <at> gmail dot com >
Tested by: Garrett Cooper < yanefbsd <at> gmail dot com >
disabled by default because there's problems with it on AT91RM9200,
currently the only host controller in the tree. I've not had time to
track those problems to ground. I'm committing because this is
important for other host controllers that are in the pipeline.
Submitted by: mav@
but an RW mapping exists for the underlying page. This change fixes the bug by using the
page / NULL returned from pmap_extract_and_hold to determine whether or not vm_fault needs
to be called.
The bug was pointed out by alc.
MFC after: 3 days
into the separate function vm_pageout_oom(). Supply a parameter for
vm_pageout_oom() describing a reason for the call.
Call vm_pageout_oom() from the swp_pager_meta_build() when swap zone
is exhausted.
Reviewed by: alc
Tested by: pho, jhb
MFC after: 2 weeks
if the probe succeeds. This guarantees that the BSD scheme
wins over the MBR scheme when MBR gets to probe first. Build-
or link-time conditions can cause schemes to end up in the
linker set in a different order. Normally BSD is before MBR
in the linker set and as such get to probe first. But typically
when the kernel gets rebuild or relinked, this can change.
sys/param.h and move the MI numbers out of here. Also move the MI
defines. Also remove a couple defines not in use (not sure if it is
age, or OpenBSD origins for thse). Note the current values that are
overrides that appear to be odd in some way.
More cleanup could be done here: NBPG appears to be spelled PAGE_SIZE
these days. There's new ways to spell PGOFSET and PGSHIFT too, I
think. These constants duplicate the MI constants and are sprinkled
into the mips code only. Further investigation is needed.
all to date and the latter also is only used in ia64 and powerpc
code which no longer serves a real purpose after bring-up and just
can be removed as well. Note that architectures like sun4u also
provide no means of implementing IPI'ing a CPU itself natively
in the first place.
Suggested by: jhb
Reviewed by: arch, grehan, jhb
former more explicitly tells the compiler that you want an empty loop.
There are some lint programs that use this hint to avoid generating
warnings.
No functional change...
JBus to PCI 2.2 bridges. In theory, this driver should also handle
`XMITS' Fireplane/Safari to PCI-X bridges but due to lack of access
to such hardware, support for these hasn't be fleshed out, yet.
that a nested partition (typically the BSD disklabel)
is not done tasting while the root file system is being
mounted. While this is rare, it's still possible.
in the transmit path, such as TCPS_TIMEWAIT, fail the credential
extraction immediately rather than acquiring locks and looking up
the inpcb on the global lists in order to reach the conclusion that
the credential extraction has failed.
This is more efficient, but more importantly, it avoids lock
recursion on the inpcbinfo, which is no longer allowed with rwlocks.
This appears to have been responsible for at least two reported
panics.
MFC after: 3 days
Reported by: ganbold
that DTrace uses.
This fixes a bug that would have affected kernels built with MAC and all
kernels built after the mpsafetty integration.
The bug will be apparent in RELENG7 on MAC kernels.
Reported by: kan
and Xlazypmap differ from the frame for Xtimerint. The Xtimerint puts
pointer to the frame between return address and frame body, while rest
of the functions listed above do not. Correct offset calculation to
allow the ddb backtrace to step over such frames.
Noted and reviewed by: tegge
Tested by: pho
MFC after: 1 week
setting TDF_INPANIC then it will never be rescheduled again. Wrap
setting the panic condition with the critical section.
Noted and reviewed by: tegge
MFC after: 1 week
The uminor() and umajor() functions have the same use in kernel space as
the minor() and major() functions in userspace. If we ever get rid of
the minor() function in kernel space, we could decide to just expose
minor() and major() to kernel space, making uminor() and umajor()
redundant.
There are two reasons why we want to have uminor() and umajor() in
<sys/types.h>:
- Having them close together prevents them from diverting. Even though
it's unlikely the definitions will change, it's a good habit to have
them at the same place.
- They don't really belong in kern_conf.c. kern_conf.c has been
liberated from dealing with device major and minor number handling.
The device_ids(9) manpage now lists the wrong #include's, because it
should only list <sys/types.h> now. I'm leaving it as it is now, because
I wonder if we should document them anyway. We're probably better off
documenting minor(3) and major(3).
After I removed all the unit2minor()/minor2unit() calls from the kernel
yesterday, I realised calling minor() everywhere is quite confusing.
Character devices now only have the ability to store a unit number, not
a minor number. Remove the confusion by using dev2unit() everywhere.
This commit could also be considered as a bug fix. A lot of drivers call
minor(), while they should actually be calling dev2unit(). In -CURRENT
this isn't a problem, but it turns out we never had any problem reports
related to that issue in the past. I suspect not many people connect
more than 256 pieces of the same hardware.
Reviewed by: kib
I've had some reports in the past that opening an already opened TTY
through, for example, /dev/tty can fail with random error codes. Looking
at ttydev_open(), I can see there is a way `error' is returned without
initialising it. Even though I haven't had any confirmation this fixes
the bug, I'll fix it anyway.
Reported by: Andrzej Tobola <ato iem pw edu pl>
filedescriptor into it. Make sure that td_fpop is NULL when calling
d_mmap from dev_pager_getpages().
Change guards against td_fpop field being non-NULL with private state
for another device, and against sudden clearing the td_fpop. This
could occur when either a driver method calls another driver through
the filedescriptor operation, or a page fault happen while driver is
writing to a memory backed by another driver.
Noted by: rwatson
Tested by: rnoland
MFC after: 3 days
To prevent any further confusion about device minor and unit numbers,
we'd better just refer to device unit numbers. Many people still think
the numbers we show inside devfs have any relation to the numbers passed
to make_dev(9), which is not the case.
Discussed with: kib
When I changed kern_conf.c three months ago I made device unit numbers
equal to (unneeded) device minor numbers. We used to require
bitshifting, because there were eight bits in the middle that were
reserved for a device major number. Not very long after I turned
dev2unit(), minor(), unit2minor() and minor2unit() into macro's.
The unit2minor() and minor2unit() macro's were no-ops.
We'd better not remove these four macro's from the kernel, because there
is a lot of (external) code that may still depend on them. For now it's
harmless to remove all invocations of unit2minor() and minor2unit().
Reviewed by: kib
Thanks goes to ITE who provided docs and feedback and made this possible.
Minor fixups to the Intel ICH code for bugs found while doing this.
(ITE8213 is very semilar to an Intel ICH)
MFC after: 1 week
includes syscall32_{de,}register() routines as well as a module handler
and wrapper macros similar to the support for native syscalls in
<sys/sysent.h>.
MFC after: 1 month
- Instead of using a syscall slot (370) just to get a function prototype
for lkmressys(), add an explicit function prototype to <sys/sysent.h>.
This also removes unused special case checks for 'lkmressys' from
makesyscalls.sh.
- Instead of having magic logic in makesyscalls.sh to only generate a
function prototype the first time 'lkmnosys' is seen, make 'NODEF'
always not generate a function prototype and include an explicit
prototype for 'lkmnosys' in <sys/sysent.h>.
- As a result of the fix in (2), update the LKM syscall entries in
the freebsd32 syscall table to use 'lkmnosys' rather than 'nosys'.
- Use NOPROTO for the __syscall() entry (198) in the native ABI. This
avoids the need for magic logic in makesyscalls.h to only generate
a function prototype the first time 'nosys' is encountered.
called without an inpcb pointer despite holding the tcbinfo global
lock, which lead to a deadlock or panic when ipfw tried to further
acquire it recursively.
Reported by: Stefan Ehmann <shoesoft at gmx dot net>
MFC after: 3 days
variable wait routines. DROP_GIANT() already manages that state in the
Giant interlock case.
- Assert that Giant is held when it is passed as a sleep interlock.
the unlocked route caching in if_stf. Add a mutex that protects
access to cached route. This seemed to fix problems for Pekka Savola.
Nick Sayer had similar problems, and in his case completly disabling
the route cache seemed to help. Add a sysctl net.link.stf.route_cache
that can be used to turn off route caching in if_stf.
PR: 122283
MFC after: 2 weeks
Tested by: Pekka Savola, Nick Sayer.
Kick the device into the right mode if it comes up as a flash-disk.
Set the buffers to a sensible 1024 bytes instead of a far too small
default.
Don't attempt to change speed, baud, parity and such, the device does
not understand it.
have hardware ram buffer. The silicon bug seem to be triggered by
pause frames if receive buffer is not aligned on FIFO word(8 bytes).
To workaround the issue, make sure to align Rx buffers on 8 bytes.
Unfortunately this workaround requires yet another Rx fixup for
strict alignment architecture machines to align IP header.
For newer hardwares that lacks ram buffer may not have this bug so
check number of available ram buffer size to see the existence of
ram buffer.
Reported by: Ian Freislich (ianf <at> clue dot co dot za), das
Tested by: Ian Freislich (ianf <at> clue dot co dot za)
Some subsystems (HPS-USB) like to lock down the TTY through a more
generic approach, namely the regular mtx(9) macro's. Allow the TTY lock
to be obtained through the new macro.
Discussed with: hps, thompsa
unmounts. When we upgrade a vnode lock from shared to exclusive during
a name cache lookup, fail the lookup with EBADF if the vnode is invalidated
while we are waiting for the exclusive lock.
Also, for correctness (though I'm not sure it can occur in practice),
downgrade an exclusively locked vnode if it should be share locked.
Tested by: pho
Yesterday I got two reports of potential crashes, related to TTY
deallocation during device closure. When a thread is in TF_OPENCLOSE,
draining its output upon closure, we should not allow calls to
tty_rel_free() to happen at the same time. This could cause the TTY to
be torn down twice.
PR: kern/127561
Reported by: KOIE Hidetaka <koie suri co jp>
Discussed with: thompsa
unconditionally drop the tcbinfo lock (after all, we assert it lines
before), but call tcp_dropwithreset() under both inpcb and inpcbinfo
locks only if we pass in an tcpcb. Otherwise, if the pointer is NULL,
firewall code may later recurse the global tcbinfo lock trying to look
up an inpcb.
This is an instance where a layering violation leads not only
potentially to code reentrace and recursion, but also to lock
recursion, and was revealed by the conversion to rwlocks because
acquiring a read lock on an rwlock already held with a write lock is
forbidden. When these locks were mutexes, they simply recursed.
Reported by: Stefan Ehmann <shoesoft at gmx dot net>
MFC after: 3 days
to the C99 style. At least, it is easier to read sysent definitions
that way, and search for the actual instances of sigcode etc.
Explicitely initialize sysentvec.sv_maxssiz that was missed in most
sysvecs.
No objection from: jhb
MFC after: 1 month
port by OF the syscons won't take over console. Only attach syscons to "screen"
if /chosen/stdout is not connected, which could be the case when loader(8)
is booted directly from the OF. This fixes Marcel's Xserver.
Reported by: marcel
It turns out our old TTY layer (and other implementations) block when
you read() on a PTY master device of which the slave device node has not
been opened yet. Our new implementation just returned 0. This caused
applications like telnetd to die in a very subtle way (when child
processes would open the TTY later than the first call to select()).
Introduce a new flag called PTS_FINISHED, which indicates whether we
should block or bail out of a read() or write() occurs.
Reported by: Claude Buisson <clbuisson orange fr>
and bcmp are not the same thing. 'man bcmp' states that the return is
"non-zero" if the two byte strings are not identical. Where as,
'man memcmp' states that the return is the "difference between the
first two differing bytes (treated as unsigned char values" if the
two byte strings are not identical.
So provide a proper memcmp(9), but it is a C implementation not a tuned
assembly implementation. Therefore bcmp(9) should be preferred over memcmp(9).
containing an Ethernet address fitted as this is yet another thing
that fails in that case in order to avoid the one second delay
until pci_read_vpd_reg() times out.
- Const'ify the bge_devs array.
ufsdirhash_free() introduced in my last commit by removing the dirhash
about to be free'd in ufsdirhash_free() from the global dirhash list
before dropping the sx lock.
Tested by: kris
One of the features that prevented us from fixing some of the TTY
consumers to work once again, was an interface that allowed consumers to
do the following:
- `Sniff' incoming data, which is used by the snp(4) driver.
- Take direct control of the input and output paths of a TTY, which is
used by ng_tty(4), ppp(4), sl(4), etc.
There's no practical advantage in committing a hooks layer without
having any consumers. In P4 there is a preliminary port of snp(4) and
thompsa@ is busy porting ng_tty(4) to this interface. I already want to
have it in the tree, because this may stimulate others to work on the
remaining modules.
Discussed with: thompsa
Obtained from: //depot/projects/mpsafetty/...
According to style(9), function argument names should only be omitted
for prototypes that are exported to userspace. This means we should
document the function arguments in the TTY header files, because they
are only used in userspace.
While there, change the type of the buffer argument of
ttydisc_rint_bypass() to `const void *' instead of `char *'.
Requested by: attilio
Obtained from: //depot/projects/mpsafetty/...
IPv4 address, first drop the udbinfo and inpcb locks, which will otherwise
be recursed. This leads to a potential minor race, but is preferable to a
deadlock when acquiring a read lock after a write lock on the inpcb.
MFC after: 3 days
Reported by: Norbert Papke <fbsd-ml@scrapper.ca>, lioux
when it runs on half-duplex media.
While I'm here add register definition for GPREG1. ATM the GPREG1
register is only valid for JMC250 A1/A2.
Submitted by: Ethan at JMicron
o change ieee80211_parse_htcap and ieee80211_parse_htinfo to save only
internal state obtained from the ie's; no dynamic state such as
ni_chw is altered
o add ieee80211_ht_updateparams to parse ht cap+info ie's and update
dynamic node state
o change ieee80211_ht_node_init to not take an htcap ie that is parsed;
instead have the caller make a separate call as one caller wants to
parse the ie while another wants to parse both cap+info ie's and
update state so can better do this with ieee80211_ht_updateparams
These changes fix sta mode state handling where the node's channel
width was shifted to ht20/ht40 prematurely.
don't duplicate this. These are setup according to the role of the
node--the bss node for ap and adhoc modes need to use parameters
that are the least common denomimator of all nodes in the bss;
otherwise we are setting up params for a station joining a bss and
we select those according to the capabilities of the station.
This stuff needs more work as we do extra work due to having setup
in common code paths shared by nodes using both roles.
o don't use the key index to identify when the driver has been
asked to allocate a key slot, use an explicit flag; allows
drivers to force s/w fallback for entries in the global table
o change callback api to allocate driver resources for a crypto key:
- de-const the key parameter so drivers can muck with the flags
- on callback failure don't automatically try to setup s/w crypto;
instead the driver must now mark the key entry for s/w crypto and
the caller will re-attach the cipher module
NB: api change permits drivers more control over fallback to s/w
crypto (e.g. based on a limited number of h/w key slots)
For receive:
o explicitly tag rx frames w/ M_AMPDU instead of passing frames through
the reorder processing according to the node having HT and the frame
being QoS data
o relax ieee80211_ampdu_reorder asserts to allow any frame to be passed
in, unsuitable frames are returned to the caller for normal processing;
this permits drivers that cannot inspect the PLCP to mark all data
frames as potential ampdu candidates with only a small penalty
o add M_AMPDU_MPDU to identify frames resubmitted from the reorder q
For transmit:
o tag aggregation candidates with M_AMPDU_MPDU
o fix the QoS ack policy set in ampdu subframes; we only support immediate
BA streams which should be marked for "normal ack" to get implicit block
ack behaviour; interestingly certain vendor parts BA'd frames with the
11e BA ack policy set
o do not assign a sequence # to aggregation candidates; this must be done
when frames are submitted for transmit (NB: this can/will be handled
better when aggregation is pulled up to net80211)
properly; was doing this only on a change in the protection mode
so the advertised protection mode in the beacon would oscillate.
Submitted by: Chris Zimmermann
o use txa_start to form the addba request and purge txa_seqstart
o fill txa_start before calling ic_addba_request to permit drivers
to override when they handle seq# generation (e.g. mwl)
Because pseudo-terminal master file descriptors no longer have a vnode
underneath, we have to fill in fstat() values ourselves. Make our
implementation somewhat sane by returning the timestamps of the TTY
device node that corresponds with our file descriptor.
Obtained from: //depot/projects/mpsafettty/...
the code to prevent useless waste of space.
- Remove support for quote bits. There is not a single driver that needs
these bits anymore. This means putc() now accepts a char instead of an
int.
- Remove the unneeded catq() and nextc() routines. They were only used
by the old TTY layer.
- Convert the clist code to use ANSI C prototypes.
In the MPSAFE TTY branch I noticed the vfs timestamps inside devfs were
allocated with 0, where the getattr() routine bumps the timestamps to
boottime if the value is below 3600. The reason why it has been designed
like this, is because timestamps during boot are likely to be invalid.
This means that device nodes that are created on demand (posix_openpt())
have timestamps with a value of boottime, which is not what we want.
Solve this by calling vfs_timestamp() inside devfs_alloc().
Discussed with: kib
initialize the vattr structure in VOP_GETATTR() with VATTR_NULL(),
vattr_null() or by zeroing it. Remove these to allow preinitialization
of fields work in vn_stat(). This is needed to get birthtime initialized
correctly.
Submitted by: Jaakko Heinonen <jh saunalahti fi>
Discussed on: freebsd-fs
MFC after: 1 month
NODEV is more appropriate when va_rdev doesn't have a meaningful value.
Submitted by: Jaakko Heinonen <jh saunalahti fi>
Suggested by: bde
Discussed on: freebsd-fs
MFC after: 1 month
VOP_GETATTR() call in vn_stat(). Thus if a file system doesn't
initialize those fields in VOP_GETATTR() they will have a sane default
value.
Submitted by: Jaakko Heinonen <jh saunalahti fi>
Discussed on: freebsd-fs
MFC after: 1 month
initialize va_vaflags and va_spare because they are not part of the
VOP_GETATTR() API. Also don't initialize birthtime to ctime or zero.
Submitted by: Jaakko Heinonen <jh saunalahti fi>
Reviewed by: bde
Discussed on: freebsd-fs
MFC after: 1 month
returning uninitialized birthtime. Most file systems don't initialize
birthtime properly in their VOP_GETTATTR().
Submitted by: Jaakko Heinonen <jh saunalahti fi>
Reviewed by: bde
Discussed on: freebsd-fs
MFC after: 1 month
Reverse the direction of pmap_promote_pde()'s traversal over the specified
page table page. The direction of the traversal can matter if
pmap_promote_pde() has to remove write access (PG_RW) from a PTE that
hasn't been modified (PG_M). In general, if there are two or more such
PTEs to choose among, it is better to write protect the one nearer the
high end of the page table page rather than the low end. This is because
most programs access memory in an ascending direction. The net result of
this change is a sometimes significant reduction in the number of failed
promotion attempts and the number of pages that are write protected by
pmap_promote_pde().
MFamd64 SVN rev 179777 CVS rev 1.621
Tweak the promotion test in pmap_promote_pde(). Specifically, test PG_A
before PG_M. This sometimes prevents unnecessary removal of write access
from a PTE. Overall, the net result is fewer demotions and promotion
failures.
compile these with -mcpu=ultrasparc (which is the hard-coded default
of our system compiler), which allows the remainder of the kernel to
be compiled with "only" -mcpu=v9 for reference and testing purposes.
consists of CPUs running at different speeds, for driving hardclock as
these timers in turn are driven at frequencies as low as 5MHz, resulting
in bad granularity compared to the TICK timers. However, don't employ
the workaround for the BlackBird erratum #1 when using the TICK timer
on machines with cheetah-class CPUs for performance reasons.
Reported by: Florian Smeets
of "cd:,\\:tbxi" with properly configured boot.tbxi, instead of booting
\boot\loader directly. Rev 183168 could probably stay, since it can be
viewed as an anti-foot-shooting measure and has no impact on normal
operation. I can revert it as well, if anybody objects.
functions used by other code in the tree. As such it was removed from
the merged tree until the functions were needed in the future. The
file was missing from the FreeBSD import, but it was listed in the
files.mips file as being standard. Remove it from there until such
time as we need one.
to vga_pci.c to request on behalf of it's children. This causes vgapci to show
up as the interrupt owner in vmstat -i, rather than the child device.
Approved by: jhb(mentor)
they point to the very same device. This should make loader usable on
some (all?) PowerMacs, where "/chosen/stdout" is disconneted from the
"screen" by the OF init process by default, except when user actually
has requested interaction with OF by holding ALT-CMD-O-F. Along with
rev 183168 this should provide a way to build bootable FreeBSD/ppc
installation or live CD that works OOB. Also, it should bring PowerMac
experience closer to that on other arches.
MFC after: 1 week
(assiming re@ blessing)
kib@ and I have decided we will MFC the bpf(4)/snp(4) fixes after we've
released 7.1. Make sure the code in HEAD doesn't refer to a flag we
don't need anyway.
snp(4) in the MPSAFE TTY P4 branch already works, but still needs some
polishing before it can be integrated to SVN.
this also can be happened if we pull the USN stick out forcibly.
Currently the ZyDAS driver uses tsleep() when it try to query a read
command to the device and it'd make a timeout if the device doesn't
response within about 1 sec.
In a case of that the USB stick is gone by hand and the driver's
scanning with changing the channel numbers, the thread which is sleeping
until a command requested is responded can be waked up after all
detaching routines finished that means the zyd softc already freed.
Tring to touch the softc freed by the wakeup thread makes a panic.
So make sure that all sleeping threads should be waken up before the
detach is completed and any other new requests to the device should be
prevented.
to "screen" node directly. The problem is that by default OF on some (all?)
Macs either doesn't provide "/chosen/stdout" or redirects it somewhere,
unless you boot in manual mode via CMD-ALT-O-F. It's nice to see normal
FreeBSD boot output instead of blank gray screen.
could trigger an error interrupt that we can't actually to do anything
against as soon as enabling the error handlers.
While at it don't bother about writing only to the write-one-to-clear
bits when clearing error bits.
disable interrupts and loop forever with these.
- Hide all MP-related bits in <machine/smp.h> underneath #ifdef SMP.
- Inline ipi_all_but_self(9) and ipi_selected(9). We don't expose any
additional bits but save a few cycles by doing so.
- Remove ipi_all(9), which actually only called panic(9). It can't be
implemented natively anyway and having it removed at least causes
MI users to fail already fail when linking.
core of this change generalizes the initial page directory setup so that
the kernel can be given arbitrarily large or small.
- small formatting fixes
- update copyright
MFC after: 1 month
years by the priv_check(9) interface and just very few places are left.
Note that compatibility stub with older FreeBSD version
(all above the 8 limit though) are left in order to reduce diffs against
old versions. It is responsibility of the maintainers for any module, if
they think it is the case, to axe out such cases.
This patch breaks KPI so __FreeBSD_version will be bumped into a later
commit.
This patch needs to be credited 50-50 with rwatson@ as he found time to
explain me how the priv_check() works in detail and to review patches.
Tested by: Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
Reviewed by: rwatson
Now, only some few places still require thread passing (mostly the ones which
access to VOP_* functions) and will be fixed once the primitive also will be.
Tested by: Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
so the benefit of having acpi.ko as a standalone module is outweighed by
the complications of drivers compiled into the kernel not including ACPI
attachments by default.
Discussed on: current
Left only parts surely required for basic troubleshooting and configuration
purposes. There is still very long output, but further shrinking makes it
less informative.
Original debugging can be enabled with hw.snd.verbose=4.
make it memory-coherency enforced (PTE_M). This is required for SMP
to work.
o Serialize tlbie operations and implement the tlbie operation in a
function called tlbie(). Hardware can end up in a live-lock if
between the tlbsync and subsequent sync on one processor another
processor executes a tlbie or tlbsync.
o Eliminate the following defines:
TLBIE, TLBSYNC, SYNC and EIEIO
Use either inline assembly statements or inline functions defined
in <machine/cpufunc.h>
during a DELETE lookup operation, lookup would cache the length of the
directory entry to be deleted in 'i_reclen'. Later, the actual VOP to
remove the directory entry (ufs_remove, ufs_rename, etc.) would call
ufs_dirremove() which extended the length of the previous directory
entry to "remove" the deleted entry.
However, we always read the entire block containing the directory
entry when doing the removal, so we always have the directory entry to
be deleted in-memory when doing the update to the directory block.
Also, we already have to figure out where the directory entry that is
being removed is in the block so that we can pass the component name
to the dirhash code to update the dirhash. So, instead of passing
'i_reclen' from ufs_lookup() to the ufs_dirremove() routine, just read
the 'd_reclen' field directly out of the entry being removed when
updating the length of the previous entry in the block.
This avoids a cosmetic issue of writing to 'i_reclen' while holding a
shared vnode lock. It also slightly reduces the amount of side-band
data passed from ufs_lookup() to operations updating a directory via
the directory's i-node.
Reviewed by: jeff
caches if not yet enabed. This is required for coherency and
atomic operations to work, not to mention performance. We use the
L2 and L3 cache settings of the BSP to configure the APs caches.
Can't be bad.
Program NAP and not DOZE. DOZE is present only on earlier CPUs
and the bit is reserved on the MPC7441 & MPC7451. NAP will do
bus snooping to keep caches coherent.
Program the PIR with the cpuid. This may not be necessary...
We're only returning a 32-bit counter.
o In decr_intr(), manually perform LICM, so that we don't test
a loop invariant condition inside a loop.
o Include <machine/smp.h>
volatile so that the compiler won't perform CSE. For SMP,
this may result in us accessing the wrong PCPU and as such
results in a bogus curthread value.
Note that getting curthread is not quite MP-safe in the sense
that it requires two instructions that aren't performed
atomically. The first instruction gets the address of the PCPU
structure and the second instruction dereferences that pointer
to get curthread. If a thread is switched-out in between these
instructions and switched-in on a different CPU, we still get
the wrong curthread.
cap on memory usage, then shared LOOKUP operations could start free'ing
dirhash structures. Without these fixes, concurrent free's on the same
directory could result in one of the threads blocked on a lock in a dirhash
structure free'd by the other thread.
- Replace the lockmgr lock in the dirhash structure with an sx lock.
- Use a reference count managed with ufsdirhash_hold()/drop() to determine
when to free the dirhash structures. The directory i-node holds a
reference while the dirhash is attached to an i-node. Code that wishes
to lock the dirhash while holding a shared vnode lock must first
acquire a private reference to the dirhash while holding the vnode
interlock before acquiring the dirhash sx lock. After acquiring the sx
lock, it drops the private reference after checking to see if the
dirhash is still used by the directory i-node.
non-LOOKUP operations.
- Relax a VOP assertion for a DELETE lookup. rename() uses WANTPARENT
instead of LOCKPARENT when looking up the source pathname. ufs_rename()
uses a relookup() to lock the parent directory when it decides to finally
remove the source path. Thus, it is ok for a DELETE with WANTPARENT set
instead of LOCKPARENT to use a shared vnode lock rather than an exclusive
vnode lock.
Reported by: kris (2)
Reviewed by: jeff
upgrades the vnode lock if it is share locked was dropping the interlock
before actually checking VI_DOOMED. Fix this by do the vdropl() after the
check and relying on it to drop the vnode interlock.
Reported by: pho
Reviewed by: kib
MFC after: 1 week
Unlike tty_rel_gone() and tty_rel_sess(), the tty_rel_pgrp() routine
does not unlock the TTY. I once had the idea to make the code call
tty_rel_pgrp() and tty_rel_sess(), picking up the TTY lock once. This
turned out a little harder than I expected, so this is how it works now.
It's a lot easier if we just let tty_rel_pgrp() unlock the TTY, because
the other routines do this anyway.
wait until the current suspension is lifted instead of silently returning
success immediately. The consequences of calling vfs_write() resume when
not owning the suspension are not well-defined at best.
Add the vfs_susp_clean() mount method to be called from
vfs_write_resume(). Set it to process_deferred_inactive() for ffs, and
stop calling it manually.
Add the thread flag TDP_IGNSUSP that allows to bypass the suspension
point in the vn_start_write. It is intended for use by VFS in the
situations where the suspender want to do some i/o requiring calls to
vn_start_write(), and this i/o cannot be done later.
Reviewed by: tegge
In collaboration with: pho
MFC after: 1 month
Show the b_dep value for the buffer in the show buffer command.
Add a comand to dump the dirty/clean buffer list for vnode.
Reviewed by: tegge
Tested and used by: pho
MFC after: 1 month
MNT_RDONLY flag before the VFS_MOUNT() is called. In ufs_inactive()
and ufs_itimes_locked(), UFS verifies whether the fs is read-only by
checking MNT_RDONLY, but this may cause loss of the IN_MODIFIED flag
for inode on the fs being remounted rw->ro.
Introduce UFS_RDONLY() struct ufsmount' method that reports the value
of the fs_ronly. The later is set to 1 only after the remount is
finished.
Reviewed by: tegge
In collaboration with: pho
MFC after: 1 month
inode having number ino. In r170991, the ip was marked IN_MODIFIED, that
is not quite correct.
Mark only the right inode modified by checking inode number.
Reviewed by: tegge
In collaboration with: pho
MFC after: 1 month
the command set (only so long as the module is present):
o add db_command_register and db_command_unregister to add and remove
commands, respectively
o replace linker sets with SYSINIT's (and SYSUINIT's) that register
commands
o expose 3 list heads: db_cmd_table, db_show_table, and db_show_all_table
for registering top-level commands, show operands, and show all operands,
respectively
While here also:
o sort command lists
o add DB_ALIAS, DB_SHOW_ALIAS, and DB_SHOW_ALL_ALIAS to add aliases
for existing commands
o add "show all trace" as an alias for "show alltrace"
o add "show all locks" as an alias for "show alllocks"
Submitted by: Guillaume Ballet <gballet@gmail.com> (original version)
Reviewed by: jhb
MFC after: 1 month
- Retire IVARs for passing IRQs around. Instead, ppbus and ppc now allow
child devices to access the interrupt by via a rid 0 IRQ resource
using bus_alloc_resource_any().
- ppc creates its own interrupt event to manage the interrupt handlers of
child devices. ppc does not allow child devices to use filters. It
could allow this if needed, but none of the current drivers use them
and it adds a good bit of complication. It uses
intr_event_execute_handlers() to fire the child device interrupt handlers
from its threaded interrupt handler.
- Remove the ppbus_dummy_intr() hack. Now the ppc device always has an
interrupt handler registered and we no longer bounce all the way up to
nexus to manage adding/removing ppbus child interrupt handlers. Instead,
the child handlers are added and removed to the private interrupt event
in the ppc device.
all the non-filter handlers attached to an interrupt event. This can be
used by device drivers which multiplex their interrupt onto the interrupt
handlers for child devices.
It seems we only depend on COMPAT_43 to implement the send() and recv()
routines. We can easily implement them using sendto() and recvfrom(),
just like we do inside our very own C library.
I wasn't able to really test it, apart from simple compilation testing.
I've heard rumours that COMPAT_SVR4 is broken inside execve() anyway.
It's still worth to fix this, because I suspect we'll get rid of
COMPAT_43 somewhere in the future...
Reviewed by: rdivacky
Discussed with: jhb
On the i386 architecture, the processor only saves the current value
of `%esp' on stack if a privilege switch is necessary when entering
the interrupt handler. Thus, `frame->tf_esp' is only valid for
an entry from user mode. For interrupts taken in kernel mode, we
need to determine the top-of-stack for the interrupted kernel
procedure by adding the appropriate offset to the current frame
pointer.
Reported by: kris, Fabien Thomas
Tested by: Fabien Thomas <fabien.thomas at netasq dot com>
someone else might change it, so after we re-acquire the lock on it,
we need to check it is still valid. People have been panicing in this
function due to soem edge cases which I have hopefully removed.
Reviewed by: keramida @
Obtained from: 1 week
common PowerPC code when all we want to achieve is to enable
external interrupts. We can set PSL_RI at any time before we
allow interrupts and/or exceptions, so move it to the AIM
specific initialization and do it when we also set PSL_ME
(machine check enable).
configuring the L2 cache on the BSP. Nor the L3 cache. We
merely print the settings.
Save the L2 and L3 cache configuration in global values so
that we know how to configure the cache on APs.
ABI change on ILP32 platforms and relating to events. However
it's harmless on little-endian ILP32 platforms in the sense
that it doesn't cause breakages. Old ILP32 thread libraries
write a 32-bit th_p and new thread libraries write a 64-bit
th_p. But due to the fact that we have an unused 32-bit data
field right after th_p and that field is always initialized to
zero, little-endian ILP32 machines effectively have a valid
64-bit th_p by accident. Likewise for new thread libraries and
old libthread_db: little endian ILP32 is unaffected.
At this time we don't support big-endian threaded applications
in GDB, so the breakage for the ILP32 case goes unnoticed.
rt_check() in its original form proved to be sufficient and
rt_check_fib() can go away (as can its evil twin in_rt_check()).
I believe this does NOT address the crashes people have been seeing
in rt_check.
MFC after: 1 week
items of the nmount() iovec. This will allow us to move
away from gathering up all the NFS mount options as a single
"struct nfs_args" to be passed down through nmount().
This will make adding new NFS mount options much easier.
Many, many thanks to Doug Rabson, who took my initial patches and
cleaned them up.
Reviewed by: dfr
MFC after: 3 months
the same way it has been implemented for IPv4.
Reviewed by: bms (skimmed)
Tested by: Nick Hilliard (nick netability.ie) (with more changes)
MFC after: 2 months
Because of using more clear and same time more functional codec parser
new driver is able to handle more codecs, use them better then before and
without most of previous quirks. All of tested codecs itself manage playback,
record, input mixing and monitoring quite fine. In all of investigated
trouble cases problem was found or in nonstandard codec usage or incorrect
codec configuration made by BIOS. Most of that cases could be fixed using
device hints, some of which are already included to the driver.
New driver supports multiple codecs per HDA bus, multiple audio function
groups per codec and multiple logical sound devices per audio function group.
So don't worry when you get several PCM devices instead of one, it is normal.
It is usual situation with powerful codecs to provide, for example, 3 PCM
devices: one for 7.1 playback and main recording, one for headset and one
for digital SPDIF I/O.
New driver implements Universal Audio Architecture (UAA) much better then
previous one. Most information about recommended codec usage now taken from
the codec configuration registers initialized by BIOS. User may alter that
configuration using device hints to reconfigure logical audio devices to
his needs in a very broad range up to the limits of the codec functionality.
New driver supports digital PCM playback and AC3 pass-through. I am not sure
about completeness of this implementation, but I have several success stories
including my own. Vchans subsystem does not support AC3 pass-through so it
had to be disabled for that devices at this moment.
New driver is ready for multichannel playback, but until our OSS is unable
to use this it will just duplicate same stereo stream into all channel
pairs.
New driver supports suspend/resume. I am unable to really test this part
myself, but I have got several success stories.
Driver has very informative verbose boot messages. So if you have any
questions or problems - enable and read them first.
Discussed on: freebsd-multimedia@
Tested by: many
we ran into in the past where places hidden by TCP_SIGNATURE were
missed.
It is possible to turn it on now that FAST_IPSEC (now know as IPSEC)
is enabled for LINT and the default and only IPsec implementation.
ng_apply_item(). There are possible (and I have got one) use-after-free
class panics because of it.
If hook is specified, require it to be valid at the apply time. The only
exceptions are the internal ng_con_part2(), ng_con_part3() and
ng_rmhook_part2() functions which are specially made to work with invalid
hooks.
the free list and in this way avoid contention on the w_mtx.
In order to make the code simple, we rely on the rule that when the head
has not a child it also doesn't have other subsequent entries.
Actually this assertion is broken because we can free all the head
children and quit witness_unlock() with the head still allocated, with no
children and subsequent entries present.
Fix this by shifting the head if other entries are present and still
freeing the object, but leaving always an head.
- Fix witness_thread_has_locks() in order to report, correctly, if the
lock list linked to a specific thread has children or not based on the
above explained rule.
- Fix a printout into DDB's "show alllocks" command in order to show,
correctly, the process name that is really what we want.
- Fix style(9) for a comment.
Tested by: Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
Reported by: Marko Kiiskila <marko dot kiiskila at nokia dot com>
Sponsored by: Nokia
- When searching for the next system drive, return the next one instead
of always returning the first one.
- Plug fd lead and make sure that the MLX_NEXT_CHILD ioctl is called
on the controller fd, not the disk's one.
While there, fix a cut-n-pase error in a warning.
Reviewed by: jhb
Approved by: kan (mentor)
MFC after: 1 month
the same vmspace, decrement the reference count of the shared LDT instead
of a newly-made copy. Code factually removed LDT from the process that
did rfork(0).
Introduce user_ldt_deref() function that does decrement of refcount for
the struct proc_ldt, and call it in the rfork(0) case on the shared LDT.
Reviewed by: jhb
MFC after: 1 week
The user_ldt_free() function shall return with dt_lock unlocked.
Error handling code in both functions do not handle this, fix it by
doing necessary lock/unlock.
While there, fix minor style nits.
MFC after: 1 week
code. We only attempt a single reset using this method (a "hard" reset),
and we use two writes to ensure there is a 0 -> 1 transition in bit 2 to
force a reset.
MFC after: 1 week
- Fix nexus_setup_intr() abuse of setting up multiple IRQs in one go. Calling
arm_setup_irqhandler() in loop is bogus, as there's just one cookie given
from the caller and it is overwritten in each iteration so that only the
last handler's cookie value prevails.
- Proper intr masking/unmasking handling: the IRQ source is masked at PIC level
only after the last handler has been removed from the list.
Reviewed by: cognet, imp, sam, stass
Obtained from: Grzegorz Bernacki gjb ! semihalf dot com
isn't fixed to only open the network device once and not do a open
and close dance on every file access; the firmwares of newer sparc64
machines perform an auto-negotiation with every open which in turn
causes netbooting to take horribly long if we open and close the
device over and over again.
Safari- and JBus-based machines. Currently the main purpose of
these drivers is debugging of the resource allocation on nexus(4)
and the register content of these devices though.
ttydevsw_outwakeup(). This should fix panics which occur after remote
login sessions timeout during moderate TTY activity. An example of
where this might occur is where a pending write to the terminal is
occurring while sshd(8) is shutting down the TTY after a TCP timeout.
Submitted by: ed
the locked entry in it16 slot 0, which typically is occupied by the
PROM, and manually entering locked entries in slots != 0.
Thanks to Hubert Feyrer for donating the Blade 2000 this change was
developed on.
of spurious witness warnings since lockmgr grew witness support. Before
this, every time you passed an interlock to a lockmgr lock WITNESS treated
it as a LOR.
Reviewed by: attilio
memory-mapped config access. Add a workaround for these systems by
checking the first function of each slot on bus 0 using both the
memory-mapped config access and the older type 1 I/O port config access.
If we find a slot that is only visible via the type 1 I/O port config
access, we flag that slot. Future PCI config transactions to flagged
slots on bus 0 use type 1 I/O port config access rather than memory mapped
config access.
detaching that when the USB is pulled out forcibly during the driver is
running background scan, a page fault can be occurred even if we called
usb_rem_task() when detaching. It looks like a kind of races.
as with getdents64. The last byte is used for storing
the d_type, add this to plain getdents case where it was
missing before. Also change the code to use strlcpy instead
of plain strcpy. This changes fix the getdents crash we
had reports about (hl2 server etc.)
PR: kern/117010
MFC after: 1 week
Submitted by: Dmitry Chagin (dchagin@)
Tested by: MITA Yoshio <mita ee.t.u-tokyo.ac jp>
Approved by: kib (mentor)
congestion window not being incremented, if cwnd > maxseg^2.
As suggested in RFC2581 increment the cwnd by 1 in this case.
See http://caia.swin.edu.au/reports/080829A/CAIA-TR-080829A.pdf
for more details.
Submitted by: Alana Huebner, Lawrence Stewart,
Grenville Armitage (caia.swin.edu.au)
Reviewed by: dwmalone, gnn, rpaulo
MFC After: 3 days
be un-cached. Our previous memory barrier was not sufficient. This patch
allocates the IGP GART tables using the BUS_DMA_NOCACHE flag to get these
cards working.
Approved by: kib
calls to bus_dma. There were multiple paths that held different locks or
no locks at all. This patch ensures that all of the calling paths drop
their lock(s) before calling drm_pci_alloc().
Reviewed by: kib
- Set UMA_ZONE_NOFREE so that the per-turnstile spin locks are type stable
to avoid a race where one thread might dereference a lock in a free'd
turnstile that was previously used by another thread.
Theorized by: tegge (2)
MFC after: 1 week
for all three contexts and configure the dt512_1 to hold 4MB pages for
them (e.g. for direct mappings).
This might allow for additional optimization by using the faulting
page sizes provided by AA_DMMU_TAG_ACCESS_EXT for bypassing the page
size walker for the dt512 in the superpage support code.
Submitted by: nwhitehorn (initial patch)
to synchronization needed after stores to internal ASIs in order
to make side-effects visible. This mainly requires the MEMBAR #Sync
after such stores to be replaced with a FLUSH. We use KERNBASE as
the address to FLUSH as it is guaranteed to not trap. Actually,
the USII synchronization rules also already require a FLUSH in
pretty much all of the cases changed.
We're also hitting an additional USIII synchronization rule which
requires stores to AA_IMMU_SFSR to be immediately followed by a DONE,
FLUSH or RETRY. Doing so triggers a RED state exception though so
leave the MEMBAR #Sync. Linux apparently also has gotten away with
doing the same for quite some time now, apart from the fact that
it's not clear to me why we need to clear the valid bit from the
SFSR in the first place.
Reviewed by: nwhitehorn
the ncr53c9x.c core where it actually belongs so future front-ends
don't need to add it.
o Use the correct OFW property when looking for the initiator ID of the
SBus device.
o Don't specify an alignment when creating the parent DMA tag for
SUNW,fas; their DMA engine doesn't require an alignment constraint
and it's no inherited by the child DMA tags anyway (which probably
is a bug though).
o Drop the superfluous sc_maxsync and use sc_minsync instead. The
former apparently was added due to a confusion with the maximum
frequency used in cam(4), which basically corresponds to the
inverse of minimum sync period.
o Merge ncr53c9x.c from NetBSD:
1.116: NCRDMA_SETUP() should be called before NCR_SET_COUNT() and
NCRCMD_DMA command in ncr53c9x_select().
1.125: free allocated resources on detach.
o Static'ize ncr53c9x_action(), ncr53c9x_init() and ncr53c9x_reset()
as these are not required outside of ncr53c9x.c.
o In ncr53c9x_attach() don't leak the device mutex in case attaching
fails.
o Register an asynchronous notification handler so in case cam(4)
reports a lost device we can cancel outstanding commands and
restore the default parameters for the target in question.
o For FAS366 correctly support 16-bit target IDs and let it know
that we use 32-bit transfers.
o Overhaul the negotiation of transfer settings. This includes
distinguishing between current and goal transfer settings of the
target so we can renegotiate their goal settings when necessary
and correcting the order in which tagged, wide and synchronous
transfers are negotiated.
o If we are requesting sense, force a renegotiation if we are
currently using anything different from asynchronous at 8 bit
as the target might have lost our transfer negotiations.
o In case of an XPT_RESET_BUS just directly call ncr53c9x_init()
instead of issuing a NCRCMD_RSTSCSI, which in turn will issue an
interrupt that is treated as an unexpected SCSI bus reset by
ncr53c9x_intr() and thus calls ncr53c9x_init(). Remove the now
no longer used ncr53c9x_scsi_reset().
o Correct an off-by-one error when setting cpi->max_lun.
o In replace printf(9) with device_printf(9) calls where appropriate
and in ncr53c9x_action() remove some unnecessarily verbose messages.
o In ncr53c9x_sched() use TAILQ_FOREACH() instead of reimplementing
it and consolidate two tagging-related target info checks into one.
o In ncr53c9x_done() set the CAM status to CAM_SCSI_STATUS_ERROR when
appropriate, respect CAM_DIS_AUTOSENSE and teach it to return SCSI
status information.
o In ncr53c9x_dequeue() ensure the tags are cleared.
o Use ulmin() instead of min() where appropriate.
o In ncr53c9x_msgout() consistently use the reset label.
o When we're interrupted during a data phase and the DMA engine is
still active, don't panic but reset the core and the DMA engine as
this should be sufficient. Also, the typical problem for triggering
this was the lack of renegotiation when requesting sense.
o Correctly handle DEVICE RESETs.
o Adapt the locking of esp(4) to MPSAFE cam(4). This includes moving
the calls of lsi64854_attach() to the bus front-ends so it can pass
the esp(4) mutex to bus_dma_tag_create(9).
o Change the LSI64854 driver to not create a DMA tag and map for the
Ethernet channel as le(4) will handle these on its own as well as
sync and unload the DMA maps for the SCSI and parallel port channel
after a DMA transfer.
o Cam(4)'ify some NetBSD-centric comments.
o Use bus_{read,write}_*(9) instead of bus_space_{read,write}_*(9)
and take advantage of rman_get_rid(9) in order to save some softc
members.
Reviewed by: scottl
MFC after: 1 month
it had been assigned to the last sleeping thread. That thread might have
started running on another CPU and have reused that sleep queue. Fix it
by just walking the thread queue using TAILQ_FOREACH_SAFE() rather than
a while loop.
PR: amd64/124200
Discovered by: tegge
Tested by: benjsc
MFC after: 1 week
but needs a lot more work. In particular, it has no flow control and has
a tendency to race when giving commands. It still uses Giant for the
tty and driver lock, but this is a keep-it-simple feature for now.
Some of the [temporary] proliferation of messages lines are way too long.
location in GDT where the segment descriptor from pcb_gs32sd is
copied, and the location is in GDT local to CPU.
Noted and reviewed by: peter
MFC after: 1 week
don't inline the locking primitives, and only grab those parts of mii
that we really need. Other space optimizations are too agressive for
the generic file (removing all of usb, and loading it as kernel
modules).
Payload Length) as set in tcpip_fillheaders().
ip6_output() will calculate it based of the length from the
mbuf packet header itself.
So initialize the value in tcpip_fillheaders() in correct
(network) byte order.
With the above change, to my reading, all places calling tcp_trace()
pass in the ip6 header via ipgen as serialized in the mbuf and with
ip6_plen in network byte order.
Thus convert the IPv6 payload length to host byte order before printing.
MFC after: 2 months
o It has been tested only on KB9202, KB9202A and KB9202B boards
o Better comments about hints
o option<space><tab>
o Add newer SX_NOINLINE option.
o Fix a few comments
calls the latter.
Merge tcp_mss_update() with code from tcp_mtudisc() basically
doing the same thing.
This gives us one central place where we calcuate and check mss values
to update t_maxopd (maximum mss + options length) instead of two slightly
different but almost equal implementations to maintain.
PR: kern/118455
Reviewed by: silby (back in March)
MFC after: 2 months
l_ucontext. To restore the registers content, trampoline needs to
dereference uc_mcontext instead of taking some undefined values from
l_ucontext.
Submitted by: Dmitry Chagin <dchagin@>
MFC after: 1 week
SYSCTL_PROCs and check that the default mss for neither v4 nor
v6 goes below the minimum MSS constant (216).
This prevents people from shooting themselves in the foot.
PR: kern/118455 (remotely related)
Reviewed by: silby (as part of a larger patch in March)
MFC after: 2 months
- Add a routine for looking up a device and checking if it is a valid geom
provider given a partial or full path to its device node.
Reviewed by: phk
Approved by: pjd (mentor)
somehow.
As a consequence we may now get an unexpected result(*).
Catch that error cases with a well defined panic giving appropriate
pointers to ease debugging.
(*) While the concensus was that the case should never happen unless
there was a bug, noone was definitively sure.
Discussed with: kmacy (about 8 months back)
Reviewed by: silby (as part of a larger patch in March)
MFC after: 2 months
This is different to the first one (as len gets updated between those
two) and would have caught various edge cases (read bugs) at a well
defined place I had been debugging the last months instead of
triggering (random) panics further down the call graph.
MFC after: 2 months
the default rule number but also the maximum rule number. User space
software such as ipfw and natd should be aware of its value. The
software that already includes ip_fw.h should use the defined value. All
other a expected to use sysctl (as discussed on net@).
MFC after: 5 days.
Discussed on: net@
As discussed with Robert on IRC, checking the permissions on
/dev/console to see if we can call TIOCCONS could be unreliable. When we
run a chroot() without a devfs instance mounted inside, it won't
actually check the permissions on the device node inside the devfs
instance.
Using the already existing PRIV_TTY_CONSOLE for this seems like a better
idea.
Approved by: rwatson
reading from EEPROM doesn't seem to work on these controllers.
Reported by: Milan Obuch ( freebsd-net at dino dot sk )
Tested by: Milan Obuch ( freebsd-net at dino dot sk )
driver will need more serious help to work with an interrupt driven
path. There's many subtleties in driving the DMA engine with
interrupts in many configurations. Best to not "guess" what the right
way would be and mislead people.
memory allocation. It was change to include the range in the normal
memory area, so these ifdef'd out special cases are no longer useful
to keep around.
the device indicates that it wasn't able to write all the data in the
buffer out.
Ed Schouten doesn't like the idea of a panic here. I think for
production code, we need something better. For right now, while we're
trying to assess the impact of this issue, a panic is OK. So complain
to me, not him if this is hit.
- The vnode has to be locked exclusively before calling insmntque().
- Until I find a way to handle insmntque() failures use VV_FORCEINSMQ flag
to force insmntque() to always succeed.
Reported by: kris, trasz, des, others
Suggested by: kib
Tested by: trasz
table. This is required in order to set obp-control-relinquished
within the PROM, allowing to safely read the OFW translations node.
Without this, f.e. a `ofwdump -ap` triggers a fatal reset error or
worse things on machines based on USIII and beyond.
In theory this should allow to remove touching %tba in cpu_setregs(),
in practice we seem to currently face a chicken and egg problem when
doing so however.
to 43 bits so update TD_PA_BITS accordingly. For the most part this
increase is transparent to the existing code except for when reading
the physical address from ASI_{D,I}TLB_DATA_ACCESS_REG, which we
only do in the loader and which was already adjusted in r182478, or
from the OFW translations node.
While at it, ensure we are only taking valid OFW mapping entries
into account.
As reported by several users on the mailing lists, applications like
screen(1) fail to properly handle ^S and ^Q characters. This was because
MPSAFE TTY didn't implement packet mode (TIOCPKT) yet. Add basic packet
mode support to make these applications work again.
Obtained from: //depot/projects/mpsafetty/...
When I migrated tty_compat.c to MPSAFE TTY, I just hooked it up to the
build and fixed it until it compiled and somewhat worked. It turns out
this was not the smartest thing, because the old TTY layer also had a
field called t_flags, which contained a set of sgtty flags.
This means our current COMPAT_43TTY code overwrites the TTY flags,
causing all strange problems to occur. Fix this code to use a new struct
member called t_compatflags. This commit may cause kern/127054 to be
fixed, but this still has to be tested/confirmed by the originator. It
has to be fixed anyway.
PR: kern/127054
- add new diag commands: devinfo, sysinfo for U-Boot-style details about the system
configuration
- better memory info summary
- style corrections
Obtained from: Semihalf
frequencies (and having different cache sizes) so use the STICK
(System TICK) timer, which was introduced due to this and is
driven by the same frequency across all CPUs, instead of the
TICK timer, whose frequency varies with the CPU clock, to drive
hardclock. We try to use the STICK counter with all CPUs that are
USIII or beyond, even when not necessary due to identical CPUs,
as we can can also avoid the workaround for the BlackBird erratum
#1 there. Unfortunately, using the STICK counter currently causes
a hang with USIIIi MP machines for reasons unknown, so we still
use the TICK timer there (which is okay as they can only consist
of identical CPUs).
- Given that we only (try to) synchronize the (S)TICK timers of APs
with the BSP during startup, we could end up spinning forever in
DELAY(9) if that function is migrated to another CPU while we're
spinning due to clock drift afterwards, so pin to the CPU in order
to avoid migration. Unfortunately, pinning doesn't work at the
point DELAY(9) is required by the low-level console drivers, yet,
so switch to a function pointer, which is updated accordingly, for
implementing DELAY(9). For USIII and beyond, this would also allow
to easily use the STICK counter instead of the TICK one here,
there's no benefit in doing so however.
While at it, use cpu_spinwait(9) for spinning in the delay-
functions. This currently is a NOP though.
- Don't set the TICK timer of the BSP to 0 during at startup as
there's no need to do so.
- Implement cpu_est_clockrate().
- Unfortunately, USIIIi-based machines don't provide a timecounter
device besides the STICK and TICK counters (well, in theory the
Tomatillo bridges have a performance counter that can be (ab)used
as timecounter by configuring it to count bus cycles, though unlike
the performance counter of Schizo bridges, the Tomatillo one is
broken and counts Sun knows what in this mode). This means that
we've to use a (S)TICK counter for timecounting, which has the old
problem of not being in sync across CPUs, so provide an additional
timecounter function which binds itself to the BSP but has an
adequate low priority.
in 182691, as the sparc64 version is going to be rototilled and sun4v
currently can't be verified to still work with the new sparc64 one
due to its overall state.
Global data (pointed by R2 on PowerPC) in principle is not guaranteed to be in
proximity of U-Boot heap (where the API signature is placed) accross different
architectures and platforms. Instead, use U-Boot stack pointer as a hint for
the search instead of the global data; this method tends to be more uniform
accross different platforms.
Obtained from: Semihalf
to an integer divide by zero panic in the kernel, if the kernel was
run with hz<1000.
Neither i386, pc98, amd64 or sparc64 are affected in the currently
supported branches and default configuration.
Submitted by: Miikka Saukko, Ossi Herrala and Jukka Taimisto from
the CROSS project at Codenomicon Ltd. via CERT-FI.
Reviewed by: bz, rwatson
Security: CVE-2008-2464
MFC after: 8 hours
at least pass muster with the loader on 3.0.3
Note that this doesn't actually make it work as Xen 3.0.3
appears to disallow recursive mappings on the page directory
sizes (and running at different frequencies) so move the cacheinfo
to the PCPU data. While at it, remove some redundant and/or unused
members from struct cacheinfo.
- In sparc64_init don't assume the first CPU node we find in the OFW
device tree is the BSP.
in order to avoid the invasive probes done by identify-routines of
ISA drivers, which may access unassigned addresses or those of
unrelated devices and thus in turn can trigger master/target aborts
as revealed by r182108 and ahc(4). I think that this is also the
cause of the hang previously seen on B100 blades during boot.
Bypassing isa_probe_children(9) also avoids adding ISA hints, which
just can be wrong for sparc64.
Reported by: gavin
processes, clear PCB_32BIT and PCB_GS32BIT bits [1].
- Reread the fs and gs bases from the msr unconditionally, not believing
the values in pcb_fsbase and pcb_gsbase, since usermode may reload
segment registers, invalidating the cache. [2].
Both problems resulted in the wrong fs base, causing wrong tls pointer
be dereferenced in the usermode.
Reported and tested by: Vyacheslav Bocharov <adeepv at gmail com> [1]
Reported by: Bernd Walter <ticsoat cicely7 cicely de>,
Artem Belevich <fbsdlist at src cx>[2]
Reviewed by: peter
MFC after: 3 days
The ttydisc_getc() routine obtains a read length from ttyoutq_read().
For no valid reason, the current code stores this value in an int, and
returns a size_t. There is no need to perform this useless conversion.
Obtained from: //depot/projects/mpsafetty/...
The D_NEEDMINOR flag was introduced for drivers that do not actually
depend on storing a device unit/minor number, but require the ability to
address the cdevs by this number, which is used by clone_create().
The cpuctl(4) driver sets D_NEEDMINOR, even though it doesn't use the
clone_create() API. Remove the flag, because maybe we want to get rid of
it somewhere in the far future.
replaced by file relative sector numbers as the buffer block number when
zero-padding a file during extension. Revert the change, it causes wrong
blocks filled with zeroes on seeking beyond end of file.
PR: kern/47628
Submitted by: tegge
MFC after: 3 days
The syscons code disabled scroll lock inside sc_cnputs() if it's going
to print a system message. The code currently wants to process any TTY
output data as well, but we cannot do this, because the TTY lock is a
sleep mutex, while cnputs() picks up a spin mutex.
Disable the code for now. It solves a panic when a console message is
printed while scroll lock is enabled. One solution would be to
initialize a task structure here.
Reported by: Paul B. Mahol <onemda gmail com>
from umodem and ufoma.
With these changes, umodem kinda works for me now. It certainly gets
past the "tip" bug that I found earlier where 115200 wasn't a valid
baud rate. This was "broken" in the mpsafetty commit, but in reality,
umodem was always broken.
translation. It turns out this is useful for applications which require
source port randomization for security (i.e. dns servers).
Discussed with: secteam
Requested by: mlaier
MFC after: 2 weeks
errata of USIII and beyond (USIII erratum #19, USIII+ erratum #1,
USIIIi erratum #1).
- Use the cheetah PA mask in {d,i}tlb_va_to_pa_sun4u() for USIII
and beyond. This is done so that these functions will still mask
the debug bits of spitfire-class CPUs once we increase TD_PA_BITS
to match the number of bits used for the PA by cheetah-class CPUs.
- Change {d,i}tlb_enter_sun4u() to also set TLB_CTX_KERNEL as the
context of the mappings entered. This is more or less cosmetic as
TLB_CTX_KERNEL is 0.
- Now that we have to distinguish between different sun4u CPUs in
the loader anyway, no longer do trial and error when reading the
portid property.
first one. U-boot, for example, uses the second register to store
MAC.[1]
- Use random MAC address if none configured instead of failing.
Submitted by: Bjorn Konig <bkoenig@alpha-tierchen.de> [1]
Reviewed by: imp
Approved by: kib (mentor)
MFC after: 1 week
lock tracking and checks, doing just the former ones.
- Fix a bug where sysctl utility was printing crazy values when setting a
new value for debug.witness.watch [0]
[0] Reported by: yongari
- In the current design, when a TTY decreases its baud rate, it tries to
shrink the queues. This may not always be possible, because it will
not free any blocks that are still filled with data.
Change the TTY queues to store a `quota' value as well, which means it
will not free any blocks when changing the baud rate, but when placing
blocks back into the queue. When the amount of blocks exceeds the
quota, they get freed.
It also fixes some edge cases, where TIOCSETA during read()/
write()-calls could actually make the queue a tiny bit bigger than in
normal cases.
- Don't leak blocks of memory when calling TIOCSETA when the device
driver abandons the TTY while allocating memory.
- Create ttyoutq_init() and ttyinq_init() to initialize the queues,
instead of initializing them by hand. The new TTY snoop driver also
creates an outq, so it's good to have a proper interface to do this.
Obtained from: //depot/projects/mpsafetty/...
anholt thinks that he added this check as part of some regression testing,
but it is failing at least some of the time. I don't want to remove it
just yet. I added a bit of debugging to help identify the issue.
Approved by: kib
wind up with the incorrect checksum on the wire when transmitted via
devices that do checksum offloading.
PR: kern/119635
Reviewed by: rwatson
MFC after: 5 days
stopped nor the waiting state and also no other means to check
whether the receiver is idle (see also r163774), we have no choice
than to call mii_tick(9) unconditionally even in the case of the
DC_REDUCED_MII_POLL handling as far as the RX side is concerned.
This isn't necessarily worse than checking whether RX is idle
though because unlike as with TX we're racing with the hardware,
which might receive packets any time while we poll the MII, anyway.
Reported and tested by: Jacob Owens
Reviewed by: yongari
MFC after: 3 days
- Macrofy bitmap table lookup. Constify the table while I am here.
- Add missing continue statements in the for loop.
Functionally it should be the last remaining fix from:
PR: kern/89752
MFC after: 1 month
1 means that witness is up and running.
0 means that witness is disabled but that it can be established later
again in effective way.
-1 means that witness is disabled permanently
- Fix a bug causing kernel to panic on witness disabling through
witness_watch. lock lists queues were still full of entries and this was
causing throubles with debugging stubs (like witness_thread_exit()).
Reported by: kris, yongari
Sponsored by: Nokia
While merging back my changes from Perforce, it seemed I removed a
locking assertion that still applies to ttydisc_rint_poll(). Restore it,
because it may come in handy.
- Implement IMAXBEL. It turned out the IMAXBEL termios switch was marked
as supported, while it had not been implemented.
- Don't go into the high watermark when in canonical mode, no data has
been canonicalized and the input buffer is full. This caused the
terminal to lock up. This prevented users from pressing
backspace/^U/etc in such cases.
This could easily be simulated by pasting a very big amount of data in
a shell with sh(1) in canonical mode.
Obtained from: //depot/projects/mpsafetty/...
it's unclear if this can happen on freebsd but does appear on netbsd.
Identified by Matthias Drochner who came up with an initial change
that we then revised together.
Reviewed by: thompsa, sephe, avatar
MFC after: 2 weeks
because the media was removed, the periph would get its refcount dropped
and ultimately freed before getting unlocked. This created a dangling
pointer that was easy to trip over. This fixes a common source of
crashes with removaable media, but problems remain and will get tracked
down.
that there are 3 different interrupt enable bits, 2 for different
families of cards, and 1 for when MSI is used. Also apply a big
hammer backstop for cards that aren't recognized. This should fix
all of the interrupt issues at boot.
- changes in support of the VLAN filter fix to 126850
- removal of a bunch of legacy code that was cruft, if not
possibly harmful.
- removal of POLLING from this driver, with multiqueue and
MSIX it just makes no sense here.
- Fix an LRO bug that I've been working on internally, intermittent
panics under stress, the problem was releasing the RX ring lock
before the LRO flushing.
- Following the above fix I now enable LRO by default
- For performance reasons increase the default number of RX queues
to 4.
- Add AIM - "Adaptive Interrupt Moderation", a fancy way of saying
that the EITR value is dynamically changed based on the size of
packets in the last interrupt interval.
- Much goodness to try, enjoy!!
A couple of months ago I was quite impressed, because when I was writing
code, I discovered that uiomove() would not allow any locks to be held,
while ureadc() did, mainly because ureadc() is implemented using the
same building blocks as uiomove().
Let's see if this triggers any aditional witness warnings on our source
tree.
Reviewed by: atillio
Previously it may have contained unnecessary (even sensitive) data from
the previous allocation.
As a (good) side effect, scratch memory may be used to store the previous
filter state(s) safely because it is allocated and freed with filter itself.
However, use it carefully because bpf_filter(9) does not have this behavior.
MFC after: 3 days
- Change it so that without INVARIANTs there are
no panics in SCTP.
- sctp_timer changes so that we have a recovery mechanism
when the sent list is out of order.
insert new vnode into the mount vnode list. Then, for the SU-enabled
mount, ffs_vfree could create freefile dependency. This dependency can
hang around forever since inode is not marked as IN_MODIFIED and
correspondingly inodeblock may be not marked as dirty.
After ffs_vget() fails, retry with FFSV_FORCEINSMQ, mark the inode as
modified, and vput() it immediately. Take care of the dup alloc.
Tested by: pho
Reviewed by: tegge
MFC after: 1 month
dependencies. In particular, it may need this while syncing filesystem
being unmounted. Since during unmount MNTK_NOINSMNTQUE flag is set,
that could sometimes disallow insertion of the vnode into the vnode
mount list, softdep code needs to overwrite the MNTK_NOINSMNTQUE flag.
Create the ffs_vgetf() function that sets the VV_FORCEINSMQ flag for
new vnode and use it consistently from the softdep code instead of
ffs_vget().
Add the retry logic to the softdep_flushfiles() to flush the vnodes
that could be instantiated while flushing softdep dependencies.
Tested by: pho, kris
Reviewed by: tegge
MFC after: 1 month
to ignore the unmounting and forces insertion of the vnode into the mount
vnode list.
Change insmntque() to fail when forced unmount is in progress and
VV_FORCEINSMQ is not specified.
Add an assertion to the insmntque(), requiring the vnode to be
exclusively locked for mp-safe filesystems.
Use the VV_FORCEINSMQ for the creation of the syncvnode.
Tested by: pho
Reviewed by: tegge
MFC after: 1 month
Use the much simpler cdevpriv for per-fd state and enable it. This allows
multiple opens of /dev/ipmi0 (e.g. using ipmitool while ipmievd is running
in the background).
MFC after: 1 week
storage. We can safely remove the label copying operations since
M_MOVE_PKTHDR will move the mbuf tags (which contain MAC labels) to
the destination mbuf.
MFC after: 1 week
Discussed with: rwatson
For some reason a return-statement crept into this code, where it
shouldn't belong. This means we didn't properly unlock the TTY before
returning to userspace.
Submitted by: Tor Egge <tor egge cvsup no freebsd org>
- Added some additional code for debug builds.
- Fixed a problem printing physical memory on 64bit system during debugging.
- Modified some of the context memory and mailbox register names to more
clearly distinguish their use.
- Added memory barriers for Intel CPUs when accessing host memory data
structures which are written by hardware.
MFC after: Two weeks.
doing it on every CPU.
- Use CPU_ABSENT() rather than pcpu_find() to determine if a CPU is not
present.
- Count up to mp_maxid rather than MAXCPU when iterating over CPUs to
match the rest of the code in the kernel.
MFC after: 1 week
if_ethersubr.c. CTASSERT is implemented using a dummy typedef, which if
used in a header file may conflict with another CTASSERT in a source file
using that header.
I'll make a note of this in CTASSERT's man page.
Approved by: imp
says that in such cases we can pick any interrupt. One of these cards
is the LG11 Wireless LAN card. I don't have one of these, but I do
know that this doesn't hurt any cards I've tried it with.
PR: 92070
Submitted by: Helge Oldach
MFC after: 3 days
first driver that does the configuration dance with CFE's. There's
likely some additional configuration that's needed to get things
working completely...
- Allocate thread0.td_kstack in pmap_bootstrap(), provide guard page
- Switch to thread0.td_kstack as soon as possible i.e. right after return
from e500_init() and before mi_startup() happens
- Clean up temp stack area
- Other minor cosmetics in machdep.c
Obtained from: Semihalf
is returned shall be kept in the waitable state.
Add WSTOPPED as an alias for WUNTRACED.
Submitted by: Jukka Ukkonen <jau at iki fi>
PR: standards/116221
MFC after: 2 weeks
executed by fexecve(2), imgp->args->fname is NULL. Moreover, there is
no way to recover the path to the script being executed.
Do what some other U*ixes do unconditionally, namely supply /dev/fd/n
as the script path when called from fexecve(). Document requirement of
having fdescfs mounted as caveat.
Split the driver into the core functionality part (sys/dev/tsec/if_tsec.c) and
the bus attachment (sys/dev/tsec/if_tsec_ocp.c).
This lets better integrate and maintain the driver in other environments with
different attachment abstractions (there is at least one other FreeBSD port --
MPC83xx -- which uses this TSEC driver, but with different local bus model
i.e. some OF derivative). While there, clean up and fix minor cosmetics.
Obtained from: Semihalf
from returning a reply message in most cases. This in turn caused
interoperability problems with Mac OS X clients.
PR: 126561
Submitted by: Richard.Conto at gmail.com
MFC after: 1 week
taken from PR/121184 which was mechanically generated from similar
lists in the Linux ipaq driver. I then took the numbers we had in
usbdevs and filled in the right symbols and eliminated duplicates.
PR: 121184
allocated for posix_openpt(2). Unfortunately, that identifier
conflicts with other events already allocated to other systems in
OpenBSM. Assign a new globally unique identifier and conform
better to the AUE_ event naming scheme.
This is a stopgap until a new OpenBSM import is done with the
correct identifier, so we'll maintain this as a local diff in svn
until then.
Discussed with: ed
Obtained from: TrustedBSD Project
in the kernel and copying it out, causing a panic when faulting on a
nofault entry. Handle this case gracefully by letting the kernel copy
functions return EFAULT instead. As such this change addresses the
same problem as r154721 does for i386.
MFC after: 3 days
Remove all the OtherBSD ifdefs. They are very out of date at this
point. OtherBSD doesn't use this file verbatim, and they don't have
FreeBSD ifdefs in their code.
Reviewed by: bms@, joerg@
have NULL mount-points. This is the case for special vnodes, such as the
one used in nameiinit() which is used for crossing mount points in lookup()
to avoid lock ordering issues.
MFC after: 2 weeks
Discussed with: rwatson, kib
In syscall, always make a copy of parameters from trapframe, this
becauses some syscalls using set_mcontext can sneakily change
parameters and later when those syscalls references parameters,
they will wrongly use register values in mcontext_t.
PR: 72998
MFC after: 3 days
appropriate even if Solaris doesn't document it (E2BIG) or use it
(EOVERFLOW).
Submitted by: nectar at apple dot com
Sponsored by: Apple, Inc.
MFC after: 3 days
When I was hacking on uart(4) to make it work with the MPSAFE TTY layer,
I noticed there was a difference between the way syscons and uart work
with respect to consoles:
- The uart(4) driver sets cn_name to the corresponding ttyu%r node,
which means init(8) (which opens /dev/console) will have its output
redirected to /dev/ttyu%r. After /etc/rc is done, it can spawn a getty
on that device node as well.
- Syscons used a little different approach. Apart from the /dev/ttyv%r
nodes, it creates a /dev/consolectl node. This device node is used by
moused and others to deliver their data, but for some reason it also
acts as a TTY, which shares its stat structure with ttyv0. This device
node is used as a console (run conscontrol).
There are a couple advantages of this approach:
- Because we use two different TTY's to represent the 0th syscons
window, we allocate two sets of TTY buffers. Even if you don't use
/dev/consolectl after the system has booted (systems that don't run
moused), it seems the buffers are still allocated.
- We have to apply an evil hack to redirect input to /dev/consolectl.
Because each window (stat) is associated not associated with one TTY,
syscons solves this by redirecting all input to closed TTY's to
consolectl.
This means that opening /dev/ttyv0 while in single user mode will
probably cause strange things to happen with respect to keyboard input
redirection.
The first patch that I discussed with philip@ turned consolectl into a
symlink to ttyv0, but this was not a good idea, because in theory we
would want consolectl to be a simple device node, which contains all the
`privileged' ioctl()'s. Apart from that, it didn't work, because each
time /dev/ttyv0 got revoked, moused also lost its descriptor to deliver
input, which meant you had to plug out/in your mouse to make it work
again. This version just leaves the consolectl device the way it is. It
can still be used to write output to ttyv0, but it can no longer receive
any input.
In my opinion this patch is not a complete solution, but it's already a
step in the good direction. It would allow us to turn consolectl into a
special (non-TTY) device node in the far future. It shaves off 15 KB of
wasted TTY buffer space.
Discussed with: philip
ufs_access()." The call to getinoquota in ufs_access() serves the
purpose of instantiating inode dquot from the vn_open(). Since quotas
are accounted only for the inodes with already attached dquot, removal
of the call prevented opened inodes from participation in the quota
calculations.
Since ufs_access() may be called with the vnode being only shared
locked, upgrade (and then downgrade) vnode lock if calling
getinoquota().
Reported by: simon at optinet com
In collaboration with: pho
MFC after: 1 week
When I changed syscons(4) to work with the MPSAFE TTY code, I just
locked all device nodes down using the compatibility feature that allows
you to override the TTY's lock (Giant in this case). Upon closer
inspection, it seems sysmouse(4) only has two internal variables that
need locking: mouse_level and mouse_status.
I haven't done any performance benchmarks on this, though I think it
won't have any dramatic improvements on the system. It is good to get
rid of Giant here, because the third argument of tty_alloc() has only
been added to ease migration to MPSAFE TTY. It should not be used when
not needed.
While there, remove SC_MOUSE, which is a leftover from the MPSAFE TTY
import.
the latency based on the Min_Gnt register so use the algorithm found
in OpenSolaris as they probably know how to interpret the value Sun
puts into these registers (previously, the latency calculated for
66MHz was most likely wrong) and for bridges additionally set up the
secondary latency register. Also set up the bridge control register
the way it's done in OpenSolaris. As the latency register don't apply
to PCI-Express and the bridge control setup wasn't tested on sun4v
(besides most likely not being needed), expand the #ifndef SUN4V
accordingly.
MFC after: 3 days
number in the irq register. While there are other issues with these
variants, avoiding writing to it helps interrupt generation on at
least one card, and doesn't hurt on the others. Flag ISA attachment
as needing INT_NO_REG written, and don't update the PC Card attachment
(which will have the effect of not touching it for PC Cards).
Document this in a comment, and tweak one or two formatting nits while
I'm here.
This is a sync to mesa/drm pre-gem, with a few fixes on top of that.
It also contains one local patch supplied by kib@ that I can't apply to
git.master shared code.
Approved by: flz
Obtained from: mesa/drm git.master
MFC after: 2 weeks
in a noticeable reduction in system time spent.
- If bus_dmamap_load_mbuf_sg(9) fails with EFBIG and we already have
defragmented the mbuf chain, don't bother to defragment and load it
a second time just yet as it's likely to fail again anyway.
MFC after: 3 days
The pty(4) driver raises up to warnings when an old BSD-style PTY is
created. The reason why I added this warning, was to make it easier to
spot applications that allocate BSD-style PTY's, while they should just
use openpty() or posix_openpt().
Add a sysctl, which allows you to override the number of remaining
messages, making it possible to suppress the warnings.
Requested by: kib
Reviewed by: kib
- Provide module dependency information.
- Static'ize ebus_release_resource() in order to match prototype.
- Remove outdated and/or obsolete comments.
- Fix whitespace bugs.
MFC after: 3 days
night.
Free the children after each pci bus that is searched. Otherwise we
leak them. With free in the new place, we also have to free children
before going to done when we find the device we're looking for.
Also, if we can't get the children of a device, just ignore that bus.
When there's an error, we don't want to free the children, since it
will be stack garbage. While we did fail to dereference it by setting
devs to 0, we didn't fail to call free. We never failed to fail, it
was the easiest thing to do.
(1) Abstract interpreter vnode labeling in execve(2) and mac_execve(2)
so that the general exec code isn't aware of the details of
allocating, copying, and freeing labels, rather, simply passes in
a void pointer to start and stop functions that will be used by
the framework. This change will be MFC'd.
(2) Introduce a new flags field to the MAC_POLICY_SET(9) interface
allowing policies to declare which types of objects require label
allocation, initialization, and destruction, and define a set of
flags covering various supported object types (MPC_OBJECT_PROC,
MPC_OBJECT_VNODE, MPC_OBJECT_INPCB, ...). This change reduces the
overhead of compiling the MAC Framework into the kernel if policies
aren't loaded, or if policies require labels on only a small number
or even no object types. Each time a policy is loaded or unloaded,
we recalculate a mask of labeled object types across all policies
present in the system. Eliminate MAC_ALWAYS_LABEL_MBUF option as it
is no longer required.
MFC after: 1 week ((1) only)
Reviewed by: csjp
Obtained from: TrustedBSD Project
Sponsored by: Apple, Inc.
not in the namecache when shared lookups are enabled (vfs.lookup_shared=1,
it is currently off by default) and the filesystem supports shared lookups
(e.g. NFS client). Specifically, if multiple concurrent LOOKUPs both miss
in the name cache in parallel, each of the lookups may each end up adding an
entry to the namecache resulting in duplicate entries in the namecache
for the same pathname. A subsequent removal of the mapping of that
pathname to that vnode (via remove or rename) would only evict one of the
entries from the name cache. As a result, subseqent lookups for that
pathname would still return the old vnode.
This race was observed with shared lookups over NFS where a file was updated
by writing a new file out to a temporary file name and then renaming that
temporary file to the "real" file to effect atomic updates of a file. Other
processes on the same client that were periodically reading the file would
occasionally receive an ESTALE error from open(2) because the VOP_GETATTR()
in nfs_open() would receive that error when given the stale vnode.
The fix here is to check for duplicates in cache_enter() and just return
if an entry for this same directory and leaf file name for this vnode is
already in the cache. The check for duplicates is done by walking the
per-vnode list of name cache entries. It is expected that this list should
be very small in the common case (usually 0 or 1 entries during a
cache_enter() since most files only have 1 "leaf" name).
Reviewed by: ups, scottl
MFC after: 2 months
PHY only and not also in the case of an external PHY currently
doing full duplex, which accidentally got broken in r172334.
It's still not clear to me why we need to enable the buffer for
an internal PHY though.
- Count excess and late collisions as output errors. [1]
- Count receive errors as input errors. [1]
Obtained from: NetBSD [1]
MFC after: 3 days
space provided by its argument structure, return EOVERFLOW instead of
E2BIG. The latter is documented in Solaris's man page, but the
former is implemented. In either case, the caller should use
getaudit_addr(2) to return the IPv6 address.
Submitted by: sson
Obtained from: Apple, Inc.
MFC after: 3 days
on the presence of fhc(4) instead; we by far don't support all of
the functionality provide by the clock board but in general it's
an integral part of FireHose-based systems which shouldn't be
possible to omit.
we can be sure that it's valid.
In case we abort early free it again else put it into the syncache.
We need the cred in the syncache to be able to restrict what will be
exportet by the sysctl helper function syncache_pcblist() (to netstat)
within jails.
PR: kern/126493
Reviewed by: rwatson (earlier versions)
MFC after: 3 days
ukbd(4) does and that emulation was enabled by default, all three of
them work together with kbdmux(4) out of the box just fine.
- Fix some whitespace bugs.
MFC after: 3 days
When my earlier MPSAFE TTY prototypes still implemented line
disciplines, we needed a mechanism to abort read()'s on PTY master
devices when inside the line discipline. Because this is no longer the
case, these checks have become unneeded.
tables, then attempt to build a simple list containing just the high and
low frequencies based on the current CPU frequency calculated during boot
and the contents of the MSR.
MFC after: 1 month
timer. Previously, the various divisors were fixed which meant that while
it gave somewhat reasonable stathz, etc. at hz=1000, it went off the rails
with any other hz value. With these changes, we now pick a lapic timer hz
based on the value of hz. If hz is >= 1500, then the lapic timer runs at
hz. If 1500 hz >= 750, we run the lapic timer at hz * 2. If hz < 750, we
run at hz * 4. We compute a divider at runtime to make stathz run as close
to 128 as we can since stathz really wants to be run at something close to
that frequency. Profiling just runs on every clock tick. So some examples:
With hz = 100, the lapic timer now runs at 400 instead of 2000. stathz
will be 133, and profhz = 400. With hz = 1000 (default), the lapic timer
is still at 2000 (as it is now), stathz is at 133 (as it is now), and
profhz will be 2000 (previously 666).
MFC after: 2 weeks
only in low memory situations, so the error fork of these fixes is
lightly tested, but they should do the least-wrong thing...
Submitted by: Hans Petter Selasky
set the MNT_FORCE flag, but do not persist "force"
in the options list, since it is a command, not a persistent property
of a mount.
Similarly, when we see "reload", set MNT_RELOAD,
but delete "reload" from the options list.
MFC after: 1 week
- According to POSIX, tcsetattr() must not fail when any of the bits in
the structure are unsupported, but it must leave the unsupported flags
alone.
- The CIGNORE flag (set by TCSASOFT, extension) was not cleared from
c_cflag, which means using it would cause it to be applied during its
entire lifespan. Eventually make sure we clear the flag.
I don't really like CIGNORE, but I think we must keep it alive right
now. With our new TTY layer, we don't actually need this mechanism,
because if you leave c_cflag, c_ispeed and c_ospeed alone, we won't make
a call into the device driver anyway.
Reported by: naddy
Tested by: naddy
thread_unsuspend_one() needs to optionally wakeup the swapper. Since we
hold the thread lock for that entire function, however, we have to push
that requirement up into the caller.
Found by: rwatson
Unlike pre-MPSAFE TTY, the pts(4) driver always returned ENXIO when a
read() or write() was performed on a pseudo-terminal master device when
the slave device was not opened. The old implementation had different
semantics:
- When the slave device had not been opened yet, read() and write() just
blocked.
- When the slave device had been closed, a read() call would return 0
bytes length.
- When the slave device had been closed, a write() call would return
EIO.
Change the new implementation to return 0 and EIO as well. We don't
implement the first rule, but I suspect this is not needed, because
routines like openpty() also open the slave device node. posix_openpt()
users also do similar things.
Reported by: rink
Tested by: rink
counters for Rx/Tx statistics. Various counters in ifnet is also
updated with these hardware counters.
Tested by: kib, Gleb Kurtsou gleb.kurtsou at gmail dot com
Ulrich Spoerlein uspoerlein at gmail dot com
It turned out we transmitted VSTART after each successful read on a TTY
when software flow control was turned on. This was because of a very
evil bug where we tested the TF_HIWAT_IN flag the other way around.
Reported by: Christian Weisgerber <naddy mips inka de>
interrupt mask register again. This saves one register access per
each interrupt.
Also don't try to process frames when driver is not running.
Tested by: kib, Gleb Kurtsou gleb.kurtsou at gmail dot com
Ulrich Spoerlein uspoerlein at gmail dot com
- Rename pciereg_cfgopen() to pcie_cfgregopen() and expose it to the
rest of the kernel. It now also accepts parameters via function
arguments rather than global variables.
- Add a notion of minimum and maximum bus numbers and reject requests for
an out of range bus.
- Add more range checks on slot/func/reg/bytes parameters to the cfg reg
read/write routines. Don't panic on any invalid parameters, just fail
the request (writes do nothing, reads return -1). This matches the
behavior of the other cfg mechanisms.
- Port the memory mapped configuration space access to amd64. On amd64
we simply use the direct map (via pmap_mapdev()) for the memory mapped
window.
- During acpi_attach() just after loading the ACPI tables, check for a
MCFG table. If it exists, call pciereg_cfgopen() on each subtable
(memory mapped window). For now we only support windows for domain 0
that start with bus 0. This removes the need for more chipset-specific
quirks in the MD code.
- Remove the chipset-specific quirks for the Intel 5000P/V/Z chipsets
since these machines should all have MCFG tables via ACPI.
- Updated pci_cfgregopen() to DTRT if ACPI had invoked pcie_cfgregopen()
earlier.
MFC after: 2 weeks
link state and detach request.
While I'm here make sure established link is IFM_10_T or
IFM_100_TX as bfe(4) just supports 10/100Mbps media.
Tested by: kib, Gleb Kurtsou gleb.kurtsou at gmail dot com
Ulrich Spoerlein uspoerlein at gmail dot com
the IP multicast input code from the output path; we don't allow
reentrance of the input path from the IP output path, it must use the
netisr due to potential lock recursion.
MFC after: 3 days
During the import of the MPSAFE TTY layer (r181905), I changed
acct_process() to lock proctree_lock instead of SESS_LOCK, because
s_ttyp is now locked using proctree_lock. One of the things I forgot,
was to lock it before we PROC_LOCK.
Commit this patch, written by kib@. To ensure we hold proctree_lock as
short as possible, obtaining `ac_tty' has now been made the first step
of filling `acct'.
Reported by: Kevin <kevinxlinuz 163 com>
Solved by: kib
o Removed unneeded header files.
o bus_dma(9) fix:
- created parent tag with 1GB dma address limit with no
alignment restrictions.
- set 4096 alignment limit for Tx/Rx descriptor rings.
- separate Rx buffer tag from Tx buffer tag such that Tx tag
allows up-to 16 segments while Rx buffer tag only allows
single segment.
- it seems the controller has no alignment restrictions on Tx/Rx
buffers. Remove ETHER_ALIGN alignment restriction in Tx/Rx
buffers.
- created a spare Rx dma map which would be used to cope with
failure of loading a dma map.
- make sure to load full Tx/Rx descriptor size for Tx/Rx
descriptor dma maps, previously bfe(4) used to load single
descriptor size for each descriptor rings. I have no idea how
it could be run without problems.
- don't blindly cast bus_addr_t type to 32bits in bfe_dma_map().
- created bfe_dma_free() to free allocated dma memory/tags.
- make sure to invoke bus_dmamap_sync(9) before/after processing
descriptor rings/buffers. Because the hardware has severe dma
address space limitation, bounce-buffers would be always used
on systems with more than 1GB memory during
descriptors/buffers access.
- added Tx descriptor ring initialization function,
bfe_list_tx_init().
- moved producer/consumer index initialization to
bfe_list_tx_init() and bfe_list_rx_init() from
bfe_chip_reset().
- added bfe_discard_buf() which will update loaded descriptors
without unloading/reloading the dma map to speed up error
recovery.
- implemented Tx side bus_dmamap_load_mbuf_sg(9). The number of
segments allowed was chosen to be 16 which should be enough for
non-TSO capable hardwares. Setting SOF bit of Tx descriptor is
done in the last to avoid potential race.
- don't give up sending frames in bfe_start() until the hardware
lacks free descriptors.
- added XXX comment to second kick command and possible workaround.
- implemented Rx side bus_dmamap_load_mbuf_sg(9).
- removed bfe_dma_map_desc() as it's not needed anymore after
the conversion to bus_dmamap_load_mbuf_sg(9).
- added endianness support. With this change bfe(4) should work
on any architectures that can create bounce buffers within 1GB
address range.
- add missing bus_dmamap_sync() in bfe_tx_eof()/bfe_rx_eof().
o Use PCI_BAR instead of hardcoded value to set BARs.
Simplified register access with bus_write_4(9)/bus_read_4(9) and
removed bfe_btag, bfe_bhandle, bfe_vhandle in softc as it's not
used anymore.
o Reorder device detach logic such that bfe_detach() is also used
for handling driver attach failure case.
o Remove unnecessary KASSERT in bfe_detach().
o Remove bfe_rx_cnt, bfe_up, bfe_vpd_prodname, bfe_vpd_readonly in
softc. It's not used at all.
o Remove BFE_RX_RING_SIZE/BFE_RX_RING_SIZE/BFE_LINK_DOWN.
Tested by: kib, Gleb Kurtsou gleb.kurtsou at gmail dot com
Ulrich Spoerlein uspoerlein at gmail dot com
memory area's base and limit are optional. The low 4-bits of the "low"
prefetchable registers indicates whether or not a 32-bit or 64-bit
region is supported. The PCI-PCI driver had been assuming that all bridges
supported a 64-bit region (and thus the two upper 32-bit registers). Fix
the driver to only use those registers if the low 4-bits of the "low"
registers indicate that a 64-bit region is supported. The PCI-PCI bridge
in the XBox happens to be a bridge that only supports a 32-bit region.
Reported by: rink
MFC after: 1 week
and 5000P/V/Z chipsets.
- If the base address of the config space BAR is above 4GB for some reason
and this isn't a PAE kernel, then warn about this (under bootverbose)
and don't use the BAR.
PR: kern/126525
Submitted by: Arthur Hartwig @ Nokia
MFC after: 2 weeks
We used to have a single wait channel inside the kernel which could be
used by threads that just wanted to sleep for some time (the next
second). The old TTY layer was the only piece of code that still used
lbolt, because I already removed the use of lbolt from the NFS clients
and the VFS syncer.
Approved by: philip
I initially didn't want to integrate the Xen console driver, because it
did not receive any testing. Kip Macy suggested that I'd better check it
in right now, because this is the easiest way for him to test it while
he is working on the Xen import.
Requested by: kmacy
For some reason, sys/sys/tty.h was only half patched. This went by
unnoticed, because the copyright notice on the top already displayed my
name, so I thought the file went in properly.
Reported by: kmacy
The previous commit also included changes to all the system call lists,
but it is a tradition to update these lists in a second commit, so rerun
make sysent to update the $FreeBSD$ tags inside these files to refer to
the latest version of syscalls.master.
Requested by: rwatson
The last half year I've been working on a replacement TTY layer for the
FreeBSD kernel. The new TTY layer was designed to improve the following:
- Improved driver model:
The old TTY layer has a driver model that is not abstract enough to
make it friendly to use. A good example is the output path, where the
device drivers directly access the output buffers. This means that an
in-kernel PPP implementation must always convert network buffers into
TTY buffers.
If a PPP implementation would be built on top of the new TTY layer
(still needs a hooks layer, though), it would allow the PPP
implementation to directly hand the data to the TTY driver.
- Improved hotplugging:
With the old TTY layer, it isn't entirely safe to destroy TTY's from
the system. This implementation has a two-step destructing design,
where the driver first abandons the TTY. After all threads have left
the TTY, the TTY layer calls a routine in the driver, which can be
used to free resources (unit numbers, etc).
The pts(4) driver also implements this feature, which means
posix_openpt() will now return PTY's that are created on the fly.
- Improved performance:
One of the major improvements is the per-TTY mutex, which is expected
to improve scalability when compared to the old Giant locking.
Another change is the unbuffered copying to userspace, which is both
used on TTY device nodes and PTY masters.
Upgrading should be quite straightforward. Unlike previous versions,
existing kernel configuration files do not need to be changed, except
when they reference device drivers that are listed in UPDATING.
Obtained from: //depot/projects/mpsafetty/...
Approved by: philip (ex-mentor)
Discussed: on the lists, at BSDCan, at the DevSummit
Sponsored by: Snow B.V., the Netherlands
dcons(4) fixed by: kan
place to add this connection, since the interrupt is for a GPIO pin,
but since we have no alternative at the moment...
Submitted by: Hans Petter Selasky
we free memory from underneath them.
This fixes an occasional panic I've been seeing in softclock() where a bad
pointer would be encountered when pushing DTrace hard.
The PCM's sound.h file only seems to include <sys/tty.h>, because
channel_if seems to require selinfo. Just replace it with
<sys/selinfo.h>.
There's no real problem with including <sys/tty.h> here, even with
MPSAFE TTY, but <sys/tty.h> is something that should be used by the TTY
layer, its driver and code that integrated it with the process tree.
corresponding USAGE should be skipped as well.
For example, below is a report desc fragment of some mouse:
COLLECTION
...
USAGE TWHEEL
FEATURE ...
...
USAGE WHEEL
INPUT ...
...
END COLLECTION
"USAGE TWHEEL" should be consumed after the FEATURE item is skipped,
otherwise, the INPUT item will be assigned to "USAGE TWHEEL" later,
other than "USAGE WHEEL".
Tested by: Grzegorz Blach
PR: usb/125941
In order to CATER this, DDB buffered output can be choosen at compile
time through the option DDB_BUFR_SIZE=nbytes where nbytes choose the size
of the buffer (suggested size is 128 bytes), which should be manually
specified in any interested config file.
Sponsored by: Nokia
kernel gs base, because %rip is adjusted only on kernel-mode trap caused
by iretq execution. On the other hand, the stack contains (hardware
part of) trap frame from the usermode. As a consequence, checking for
frame mode and doing swapgs causes the kernel to enter trap() with
usermode gs base.
Remove the check for mode and conditional swapgs, we already have right
gs base in the MSR.
Submitted by: Nate Eldredge <neldredge math ucsd edu>
MFC after: 3 days
