o mark phy type to indicate 1/2 or 1/4-rate operation
o use phy type instead of channel attributes to identify 1/2 and 1/4-rate
operation
o general cleanup of code including move phy constants to ah_internal.h
Eventually this code should go away and we should use the net0211 equivalents.
the old TTY implementation; however, take a cut at stripping its
optional Giant-protected code paths enabled using debug.cx.mpsafenet,
which will no longer work once IFF_NEEDSGIANT is removed.
join allocate() and dmainit() atapci subdriver's channel initialization
methods into single ch_attach() method.
As opposite to ch_attach() add new ch_detach() method to deallocate/disable
channel.
members for a kinfo entry on a process-wide system.
- Use the newly introduced function in order to fix cases like
KERN_PROC_PROC where aggregating stats are broken because they just
consider the first thread in the pool for each process.
(Note, additively, that KERN_PROC_PROC is rather inaccurate on
thread-wide informations like the 'state' of the process. Such
informations should maybe be invalidated and being forceably discarded
by the consumers?).
- Simplify the logic of sysctl_out_proc() and adjust the
fill_kinfo_thread() accordingly.
- Remove checks on the FIRST_THREAD_IN_PROC() being NULL but add
assertives.
This patch should fix aggregate statistics for KERN_PROC_PROC.
This is one of the reasons why top doesn't use this option and now it
can be use it safely.
ps, when launched in order to display just processes, now should report
correct cpu utilization percentages and times (as opposed by the old
code).
Reviewed by: jhb, emaste
Sponsored by: Sandvine Incorporated
it instead of overloading sbp_show_sdev_info().
replace calls to printf with calls to device_printf and cleanup debug
messages
Remove a bit of dead, commented out code.
Reviewed by: scottl(mentor)
MFC after: 2 weeks
- Update to firmware 1.4.39 for dual-chip NIC (10G-PCIE2-xxx)
support, and SFP+ i2c support
- Identify newer "B" NICs (10G-PCIEx-8B-x) correctly, rather than
mis-identifying them as "A" NICs (cosmetic only)
- Identify the IFM_10G_LRM ifmedia type, where applicable.
- Identify ifmedia types for SFP+ based NICs
- Update copyright
Sponsored by: Myricom
MFC after: 1 week
Deprecate unused phy_delay Self ID field as it was removed
by 1394a-2000.
Attempt to parse extended Self ID PHY packets if they are detected
Reviewed by: scottl (mentor)
MFC after: 2 weeks
interesting conditional printf's into single device_printf's
Change a couple of variable names so that I don't have to trace what they
acutally do anymore.
Enable the display of the Self ID PHY packet if firewire_debug > 0
Reviewed by: scottl(mentor)
MFC after: 2 weeks
Prior to this fix, IEVENT register was always cleared before calling
tsec_error_intr_locked(), which prevented error recovery actions from
happening with polling enabled (and could lead to serious problems, including
controller hang).
Submitted by: Marcin Ligenza marcinl ! pacomp dot com dot pl
- interrupt coalescing
- polling
- jumbo frames
- multicast
- VLAN tagging
The enhanced version of the chip (eTSEC) can also take advantage of:
- TCP/IP checksum calculation h/w offloading
Obtained from: Freescale, Semihalf
If speed of link between two devices is slower than the reported max
speed of both endpoints, the current driver will fail and be unable to
negotiate.
Summary:
Test negotiated speed by reading the CSRROM into a dummy variable.
If that read fails, decrement our speed and retry. If all else fails,
go to lowest speed possible(0).
Report speed to the user.
Add display of the Bus Info Block when debug.firewire_debug > 1
Support the Bus Info Block(1394a-2000) method of speed detection.
I also should note that I am moving "hold_count" to 0 for future
releases.
This variable determines how many bus resets to "hold" a removed
firewire device before deletion. I don't feel this is useful and will
probably drop support for this sysctl in the future.
Reviewed by: scottl(mentor)
MFC after: 2 weeks
almost once. After we've configured the devices that were present the
first time through, then we know that we're done. If the device has
other devices that are deferred, then it must do a similar dance.
This catches both PC Cards and CardBus cards.
to not allocate them after the recent ata channels enumeration changes.
It allows to save some resources, not bother user with unexisting hardware
and not check unimplemented ports status on every interrupt.
method allows schemes to reject the ctl request, pre-check
the parameters and/or modify/set parameters. There are 2
use cases that triggered the addition:
1. When implementing a R/O scheme, deletes will still
happen to the in-memory representation. The scheme is
not involved in that operation. The pre-check method
can be used to fail the delete up-front. Without this
the write to disk will typically fail, but at that
time the delete already happened.
2. The EBR scheme uses a linked list to record slices.
There's no index. The EBR scheme defines the index
as a function of the start LBA of the partition. The
add verb picks an index for the range and then invokes
the add method of the scheme to fill in the blanks. It
is too late for the add method to change the index.
The pre-check is used to set the index up-front. This
also (silently) overrides/nullifies any (pointless)
user-specified index value.
Works fine with AHCI and theoretically other MSI capable devices.
At this moment support disabled by default. To enable it, set
"hint.atapci.X.msi=1" device hint.
Add two new functions to the libusb20 API and required kernel ioctls.
- libusb20_dev_get_iface_desc
- libusb20_dev_get_info
New command to usbconfig, "show_ifdrv", which will print out the kernel driver
attached to the given USB device aswell.
See "man libusb20" for a detailed description.
Some minor style corrections long-line wrapping.
Submitted by: Hans Petter Selasky
- specification claims that 1 second is just a maximum controller reset time;
implement controller reset properly to save almost 1 second of boot, and
about half second of resume time;
- enable channel interrupts only after channel status reset to fix duplicate
device creation on resume due to unwanted device connection event;
- as described in specification, wait for disk ready status after channel
power-up; it is not so important when disk already touched by BIOS, but
solves device not ready problems on resume and probably some other cases.
- uncomment channel stop/start on soft-reset as it is declared mandatory by
specification; it was commented due to some random drive detection problems
on VIA and JMicron controllers, but I hope it is fixed by previous point.
If the file system backing a process' cwd is removed, and procstat -f PID
is called, then these messages would have been printed. The extra verbosity is
not required in this situation.
Requested by: kib
Approved by: kib
Move channel softc initialization from ata_XXX_probe() to ata_XXX_attach().
Instead of calculating ata channel number as position in child device list,
pass it's real number directly from controller probe routine using ivars.
It is simpler and IMHO more correct.
revealed that a process' current working directory can be VBAD if the
directory is removed. This can trigger a panic when procstat -f PID is
run.
Tested by: pho
Discovered by: phobot
Reviewed by: kib
Approved by: kib
Giving a charactere device execute permissions doesn't have any use.
Right now there isn't a single device node in /dev that has it, except
the USB2 device node, so remove it.
Approved by: hps, thompsa
longer do we require SCTP to be in the kernel for the
lib to be able to handle SCTP. We do this by moving
the CRC32c checksum into libkern/crc32.c and then adjusting
all routines to use the common methods. Note that this
will improve the performance of iSCSI since they were
using the old single 256 bit table lookup versus the
slicing 8 algorithm (which gives a 4x speed up in
CRC32c calculation :-D)
Reviewed by:rwatson, gnn, scottl, paolo
MFC after: 4 week? (assuming we MFC the alias_sctp changes)
fails to attach (possibly due to disable hints) then we get called back for
unload. Correctly handle the case where the keyboard isnt found rather than
calling panic.
- Make usb2_transfer_pending() part of the USB core header file.
- Make usb2_transfer_pending() NULL safe.
- Make sure that USB process functions return if the process has been drained.
- Remove two unused functions.
Submitted by: Hans Petter Selasky
name) (not sure whether this works correctly, but should be close).
Fix the stub attach phase for some Novatel cards. They expect the CSW
(repsonse to CBW, SCSI eject command) to be fetched before switching to
modem mode.
MFC after: 2 weeks
after the LLADDR is reclaimed which causes a null pointer deref with
inherit_mac enabled. Record the ifnet pointer of the interface and then compare
that to find when to re-assign the bridge address.
Submitted by: sam
Add a note next to fields in network format.
The n_* types are not enough for compiler checks on endianness, and their
use often requires an otherwise unnecessary #include <netinet/in_systm.h>
The typedef in in_systm.h are still there.
the correct behaviour (sorting by distance from the current head position
in the scan direction) and bioq_insert_head() and bioq_insert_tail()
have a well defined (and useful) behaviour, especially when intermixed
with calls to bioq_disksort().
In particular:
- fix a bug in the existing bioq_disksort() that did not use the
current head position correctly;
- redefine semantics of bioq_insert_head() and bioq_insert_tail().
bioq_insert_tail() can now be used as a barrier
between previous and subsequent calls to bioq_disksort().
The code is heavily documented in the source code so please refer
to that for the details.
Much of this code comes from Fabio Checconi. Also thanks to Kirk
for feedback on the (re)definition of bioq_insert_tail().
NOTE: in the current tree there is only a handful of files which
intermix calls to bioq_disksort() with bioq_insert_head() and
bioq_insert_tail(). The ordering of the queue in these situation
was not specified (nor easy to figure out) before, so I doubt any
of that code could be affected by the specification of the API.
Also note that the current implementation is significantly simpler
than the previous one (also used in ata_sort_queue()).
It would be useful to reimplement ata_sort_queue() using
the same code used in bioq_disksort().
MFC after: 1 week
a serial number, fall through to the next case so that initial negotiation
still happens. Without this, devices were showing up with only 1 available
tag opening, leading to observations of very poor I/O performance.
This should fix problems reported with VMWare Fusion and ESX. Early
generation MPT-SAS controllers with SATA disks might also be affected.
HP CISS controllers are also likely affected, as are many other
pseudo-scsi disk subsystems.
references to iv_bss and the sta table; this is equivalent and causes
direct reclaim of the old bss node when any references in packets inflight
are reclaimed (previously the old node would sit in the bss table until
the inactivity processing reclaimed it)
o remove ieee80211_node_reclaim now that it's only use is gone
Reviewed by: avatar, cbzimmer
parent interface tasks to complete. This had been added to the ioctl path but
it is also need elsewhere like detach so its safe to teardown.
Reported by: Hans Petter Selasky
Submitted by: sam
checked whether this applies to builds in /sys/*/compile/* as well):
- Create empty opt_*.h files were missing
- Hook up svr4 to the build. It compiles fine here, so no reason to
disconnect it in the Makefile. were missing
- Hook up svr4 to the build. It compiles fine here, so no reason to
disconnect it in the Makefile.
kernel. Rather than just kick off the page daemon, we actively retire
more mappings. The inner loop now looks a lot like the inner loop of
pmap_remove_all.
Also, get_pv_entry can't return NULL now, so remove panic if it did.
Reviewed by: alc@
- Always read the character device pointer while the associated devfs vnode
is locked. Also, use dev_ref() to obtain a new reference on the vnode for
the mountpoint. This reference is released on unmount. This mirrors the
earlier fix to FFS.
Reviewed by: kib
cleanup. Before the GEOM consumer would not have been closed.
- Bump the reference on the character device being mounted while the
associated devfs vnode is locked.
Reviewed by: kib
guaranteed to initialize its two last arguments. Therefore, there is a
warning in the subsequent caller ar5416FillVpdTable(), which doesn't
initialize those arguments.
Change getLowerUpperIndex() to assign values to indexL and indexR even
in the case of assertion failure.
Submitted by: Pavel Roskin <proski@gnu.org>
Just like the old TTY layer, the current MPSAFE TTY layer does not make
any attempt to serialize calls of write(). Data is copied into the
kernel in 256 (TTY_STACKBUF) byte chunks. If a write() call occurs at
the same time, the data may interleave. This is especially likely when
the TTY starts blocking, because the output queue reaches the high
watermark.
I've implemented this by adding a new flag, TTY_BUSY_OUT, which is used
to mark a TTY as having a thread stuck in write(). Because I don't want
non-blocking processes to be possibly blocked by a sleeping thread, I'm
still allowing it to bypass the protection. According to this message,
the Linux kernel returns EAGAIN in such cases, but I think that's a
little too restrictive:
http://kerneltrap.org/index.php?q=mailarchive/linux-kernel/2007/5/2/85418/thread
PR: kern/118287
from the parent to the child process if they have an operation vector
of &badfileops. This narrows a set of races involving system calls that
allocate a new file descriptor, potentially block for some extended
period, and then return the file descriptor, when invoked by a threaded
program that concurrently invokes fork(2). Similar approches are used
in both Solaris and Linux, and the wideness of this race was introduced
in FreeBSD when we moved to a more optimistic implementation of
accept(2) in order to simplify locking.
A small race necessarily remains because the fork(2) might occur after
the finit() in accept(2) but before the system call has returned, but
that appears unavoidable using current APIs. However, this race is
vastly narrower.
The fix can be validated using the newfileops_on_fork regression test.
PR: kern/130348
Reported by: Ivan Shcheklein <shcheklein at gmail dot com>
Reviewed by: jhb, kib
MFC after: 1 week
in 'sc_state'. This allows the lpt_release_ppbus() calls in those two
routines to actually release the ppbus and thus fixes the hangs noticed
with the lpt(4) driver since the recent ppbus changes. The old lpt(4)
driver didn't actually check the HAVEBUS flag in lpt_release_ppbus() which
is why these bugs weren't noticed before.
use patches so far:
+ Envy24:
- fix: broken init data for M Audio Delta DiO 2496
- add: support for M Audio Delta 44
- add: support for M Audio Delta 1010LT
Tested by: Dominique Goncalves, dominique.goncalves at gmail.com
- add: support for Terratec EWX 2496
Tested by: Stefan Sperling, stsp at stsp.name
- add: support for M Audio Delta 66
Tested by: Richard Bown, richard.bown at blueyonder.co.uk
- add: support for M Audio Delta 1010
Tested by: Andrew Reilly, areilly at bigpond.net.au
+ Envy24HT:
- add: support for Terrasoniq TS22PCI
- fix: M-Audio Revolution 5.1 sound volume is very low
Reported by: Oliver Hartmann, ohartman at zedat.fu-berlin.de
Andrey Slusar, anrays at gmail.com
Tested by: Andrey Slusar, anrays at gmail.com
Rusu Silviu, arol.the at gmail.com
- fix: M-Audio Revolution 7.1 sound is distorted and very quiet
Reported by: Olev Hannula, hannula at gmail.com
Tested by: Olev Hannula, hannula at gmail.com
Stanislav Belansky, stanislav at icmail.ru
- fix: Terratec PHASE 22 codec is power-off due to wrong init data
Reported by: Philipp Ost, pj at smo.de
Tested by: Philipp Ost, pj at smo.de
+ SpicDS:
- fix: AK4381 produce hiss sound on 192kHz sample rate
- fix: stupid bug with volume control for AK4396
Submitted by: Konstantin Dimitrov <kosio.dimitrov@gmail.com>
kernel one as the non-faulting flush address in the loader so
we can can change KERNBASE and VM_MIN_KERNEL_ADDRESS if we
ever want to without needing to worry about using a compatible
loader.
- Correctly check for LOADER_DEBUG.
- Add a missing const for page_sizes[].
This file was missed in r188455.
o Fix a minor indentation problem.
o Put in the extra-strict KOBJMETHOD define, but commented out since
the tree isn't yet ready.
Reviewed by: (1) was posted to arch@ without objection (and 1 go for it)
Attach call without devclass set crashes the system.
On resume AHCI driver sometimes tries to create duplicate adX device.
It is surely his own problem, but IMHO it is not a reason to crash here.
Other reasons are also possible.
kernel one as the non-faulting flush address in the loader so
we can can change KERNBASE and VM_MIN_KERNEL_ADDRESS if we
ever want to without needing to worry about using a compatible
loader.
- Correctly check for LOADER_DEBUG.
- Add a missing const for page_sizes[].
result in errors for a format loading but subsequent correct recognizing
for another format.
File format loading functions should avoid printing any additional
informations but just returning appropriate (and different between each
other) error condition, characterizing different informations.
Additively, the linker should handle appropriately different format
loading errors.
While a general mechanism is desired, fix a simple and common case on
amd64: file type is not recognized for link elf and confuses the linker.
Printout an error if all the registered linker classes can't recognize
and load the module.
Reviewed by: jhb
Sponsored by: Sandvine Incorporated
MFp4 //depot/projects/usb; 157412
Sync from svn.freebsd.org/base/user/thompsa/usb which is a minimal changeset
from oldUSB (no config_td).
This excludes the taskqueue changes (for the moment) as requested.
Sync from svn.freebsd.org/base/user/thompsa/usb which is a minimal changeset
from oldUSB (no config_td).
This excludes the taskqueue changes (for the moment) as requested.
- Change "usb2_pause_mtx" so that it takes the timeout value in ticks
- Make sure that attach waits for the generic probe to leave room for firware
loader drivers and device specific USB Audio drivers like USB phone adapters
Submitted by: Hans Petter Selasky
- USB serial drivers cleanup, factor out code
- Simplify line state programming
- Integrate uslcom from old USB stack
Submitted by: Hans Petter Selasky
1. Move most of the ifnet logic into the usb2_ethernet module, this includes,
- make all usb ethernet interfaces named ue%d
- handle all threading in usb2_ethernet
- provide default ioctl handler
- handle mbuf rx
- provide locked callbacks for init,start,stop,etc
2. Cleanup CDC-Ethernet driver.
Submitted by: Hans Petter Selasky
Obtained from: svn.freebsd.org/base/user/thompsa/usb [1]
- Change "usb2_pause_mtx" so that it takes the timeout value in ticks
- Factor out USB ethernet and USB serial driver specific control request.
- USB process naming cleanup.
Submitted by: Hans Petter Selasky
- Change "usb2_pause_mtx" so that it takes the timeout value in ticks
- USB controller: EHCI High Speed Interrupt endpoint fix.
- Fix OHCI and EHCI counting bug when multiple TD's are involved in
a short USB transfer and a short packet happens on the non-last TD in the
USB transfer frame.
- USB process naming cleanup.
Submitted by: Hans Petter Selasky
lookups:
- Honor the caller's locking flags in udf_root() and udf_vget().
- Set VV_ROOT for the root vnode in udf_vget() instead of only doing it in
udf_root().
- Honor the requested locking flags during pathname lookups in udf_lookup().
- Release the buffer holding the directory data before looking up the vnode
for a given file to avoid a LOR between the "udf" vnode locks and
"bufwait".
- Use vn_vget_ino() to handle ".." lookups.
- Special case "." lookups instead of calling udf_vget(). We have to do
extra checking for the vnode lock for "." lookups.
the same dma tag. However, it can happen multiple dma tags share the same
bounce zone too, so add a per-bounce zone map counter, and check it instead of
the dma tag map counter, to know if we have to alloc more pages.
Reported by: miwi
Reviewed by: scottl
controllers that lose Tx completion interrupts under certain
conditions. With this change it's safe to use MSI on PCIe
controllers so enable MSI on these controllers.
found inside extended partitions and used to create logical partitions.
At this time write/modify support is not (yet) present.
The EBR and MBR schemes both check the parent scheme. The MBR will
back-off when nested under another MBR, whereas the EBR only nests
under a MBR.
offset. This is needed for the ehci hardware buffer rings that assume
this behavior.
This is an interim solution, and a more general one is being worked
on. This solution doesn't break anything that doesn't ask for it
directly. The mbuf and uio variants with this flag likely don't work
and haven't been tested.
Universe builds with these changes. I don't have a huge-memory
machine to test these changes with, but will be happy to work with
folks that do and hps if this changes turns out not to be sufficient.
Submitted by: alfred@ from Hans Peter Selasky's original
hold the map lock there, and might need the vnode lock for OBJT_VNODE
objects. Postpone object deallocation until caller of vm_map_delete()
drops the map lock. Link the map entries to be freed into the freelist,
that is released by the new helper function vm_map_entry_free_freelist().
Reviewed by: tegge, alc
Tested by: pho
Reference object, drop the map lock, and then call vm_object_sync().
The object sync might require vnode lock for OBJT_VNODE type objects.
Reviewed by: tegge
Tested by: pho
acquire vnode lock for OBJT_VNODE object after map lock is dropped.
Because we have the busy page(s) in the object, sleeping there would
result in deadlock with vnode resize. Try to get lock without sleeping,
and, if the attempt failed, drop the state, lock the vnode, and restart
the fault handler from the start with already locked vnode.
Because the vnode_pager_lock() function is inlined in vm_fault(),
axe it.
Based on suggestion by: alc
Reviewed by: tegge, alc
Tested by: pho
underlying partitioning scheme.
o Put the start and end of the partition in the XML configuration.
The start and end are the LBAs of the first and last sector
(resp.) of the partition. They are currently identical to the
offset and size attributes, which describe the partition as an
offset and size in bytes, but may not in the future. The start
and end will be used for the logical partition boundaries and
may include metadata. The offset and size will always represent
the useful storage space within the partition. Typically these
two notions are the same, but for logical partitions in an
extended partition, the EBR is more naturally treated as being
part of the partition.
describing why several calls to vm_deallocate_object() with locked map
do not result in the acquisition of the vnode lock after map lock.
Suggested and reviewed by: tegge
be accessible outside vmspace_fork() yet, but locking it would satisfy
the protocol of the vm_map_entry_link() and other functions called
from vmspace_fork().
Use trylock that is supposedly cannot fail, to silence WITNESS warning
of the nested acquisition of the sx lock with the same name.
Suggested and reviewed by: tegge
both node pointer and name component. This does the right thing for
hardlinks to the same node in the same directory.
Submitted by: Yoshihiro Ota <ota j email ne jp>
PR: kern/131356
MFC after: 2 weeks
(duplicate) code in sys/netipsec/ipsec.c and fold it into
common, INET/6 independent functions.
The file local functions ipsec4_setspidx_inpcb() and
ipsec6_setspidx_inpcb() were 1:1 identical after the change
in r186528. Rename to ipsec_setspidx_inpcb() and remove the
duplicate.
Public functions ipsec[46]_get_policy() were 1:1 identical.
Remove one copy and merge in the factored out code from
ipsec_get_policy() into the other. The public function left
is now called ipsec_get_policy() and callers were adapted.
Public functions ipsec[46]_set_policy() were 1:1 identical.
Rename file local ipsec_set_policy() function to
ipsec_set_policy_internal().
Remove one copy of the public functions, rename the other
to ipsec_set_policy() and adapt callers.
Public functions ipsec[46]_hdrsiz() were logically identical
(ignoring one questionable assert in the v6 version).
Rename the file local ipsec_hdrsiz() to ipsec_hdrsiz_internal(),
the public function to ipsec_hdrsiz(), remove the duplicate
copy and adapt the callers.
The v6 version had been unused anyway. Cleanup comments.
Public functions ipsec[46]_in_reject() were logically identical
apart from statistics. Move the common code into a file local
ipsec46_in_reject() leaving vimage+statistics in small AF specific
wrapper functions. Note: unfortunately we already have a public
ipsec_in_reject().
Reviewed by: sam
Discussed with: rwatson (renaming to *_internal)
MFC after: 26 days
X-MFC: keep wrapper functions for public symbols?
solving a possible panic when snd_ai2s is loaded at boot time. Also change
the device setup to indicate to the pcm layer that the device is MPSAFE.
Submitted by: Marco Trillo
Suggestions by: Ariff Abdullah
- ath(4) is the last listed device, so make it's comment last as well
- since we have hints for le(4), bring it back by inserting commented
out line until I check, if it can be safely enabled.
- bring snc(4) explanation
- put pmtimer comment together with other drivers' comments in a block
- bring comments for canbus, canbepm, pmc
olpt comment has been left blank, since I don't know how does this
driver differ from other printer drivers.
- leave pmtimer comment that is common to other architectures.
- bring pbio explanation to the block comment relating to other
drivers in the same block.
- remove misleading nve/nfe comments, which make it hard to
distinguish those two at a first glance
- bring pbio documentation to the block comment together with
other drivers
I also brought commented out line responsible for si(4), since it
seems to compile and already has respective comment in this file.
sequence of pathname components. We walk the list building a string in
the caller's passed in buffer. Currently this only handles path names
in CS8 (character set 8) as that is what mkisofs generates for UDF images.
MFC after: 1 month
global NOTES file.
cx(4) driver isn't present in this file, though it could be. However, cx(4)
seems to be more or less dead -- it hasn't been linked to the modules build,
and after TTY-ng transformations it doesn't compile.
Remove it until cx(4) is broken.
need to explicitly list it here once again. This removes:
WARNING: duplicate option `DEV_URAL' encountered.
WARNING: duplicate device `ural' encountered.
Warnings when compiling LINT on amd64.
- correct format strings
- fill opt_agp.h if AGP_DEBUG is defined
- bring AGP_DEBUG to LINT by mentioning it in NOTES
This should hopefully fix a warning that was...
Found by: Coverity Prevent(tm)
CID: 3676
Tested on: amd64, i386
- Add a separate set of vnode operations that inherits from the fifo ops
and use it for fifo nodes.
- Add a VOP_SETATTR() method that allows setting the size (by silently
ignoring the requests) of fifos. This is to allow O_TRUNC opens of
fifo devices (e.g. I/O redirection in shells using ">").
- Add a VOP_PRINT() handler while I'm here.
- Align the fifo output in fifo_print() with other vn_printf() output.
- Remove the leading space from lockmgr_printinfo() so its output lines up
in vn_printf().
- lockmgr_printinfo() now ends with a newline, so remove an extra newline
from vn_printf().
of devvp becomes VBAD, which UFS incorrectly interprets as snapshot
vnode, which in turns causes panic. Fix it by replacing '!= VCHR'
with '== VREG'.
With this fix in place, you should no longer be able to panic the system
by removing a device with an UFS filesystem mounted from it - assuming
you don't use softupdates.
Reviewed by: kib
Tested by: pho
Approved by: rwatson (mentor)
Sponsored by: FreeBSD Foundation
Back in 1.1 of kern_sysctl.c the sysctl() routine wired the "old" userland
buffer for most sysctls (everything except kern.vnode.*). I think to prevent
issues with wiring too much memory it used a 'memlock' to serialize all
sysctl(2) invocations, meaning that only one user buffer could be wired at
a time. In 5.0 the 'memlock' was converted to an sx lock and renamed to
'sysctl lock'. However, it still only served the purpose of serializing
sysctls to avoid wiring too much memory and didn't actually protect the
sysctl tree as its name suggested. These changes expand the lock to actually
protect the tree.
Later on in 5.0, sysctl was changed to not wire buffers for requests by
default (sysctl_handle_opaque() will still wire buffers larger than a single
page, however). As a result, user buffers are no longer wired as often.
However, many sysctl handlers still wire user buffers, so it is still
desirable to serialize userland sysctl requests. Kernel sysctl requests
are allowed to run in parallel, however.
- Expose sysctl_lock()/sysctl_unlock() routines to exclusively lock the
sysctl tree for a few places outside of kern_sysctl.c that manipulate
the sysctl tree directly including the kernel linker and vfs_register().
- sysctl_register() and sysctl_unregister() require the caller to lock
the sysctl lock using sysctl_lock() and sysctl_unlock(). The rest of
the public sysctl API manage the locking internally.
- Add a locked variant of sysctl_remove_oid() for internal use so that
external uses of the API do not need to be aware of locking requirements.
- The kernel linker no longer needs Giant when manipulating the sysctl
tree.
- Add a missing break to the loop in vfs_register() so that we stop looking
at the sysctl MIB once we have changed it.
MFC after: 1 month
sysctls during a linker file unload. We drop the lock when doing similar
operations during a linker file load. To close races, clear the LINKED
flag before dropping the lock so that the linker file is no longer visible
to userland.
MFC after: 1 week
o change tdma packet drop msg when ack required to ATH_DEBUG_TDMA
(ATH_DEBUG_XMIT is too noisy)
o add a debug msg for raw packet drop due to interface down/invalid
o add stats for these two cases
o explain how another drop case is handled
IEEE80211_KEY_DEVKEY
o fix channel power printing (they are signed values)
o add show statab to dump a node table and automatically dump the sta
table of a com structure with /s
o add CFI_SUPPORT_STRATAFLASH compile option to enable support
o add new ioctls to get/set the factory and user/oem segments of the PR
and to get/set Protection Lock Register that fuses the user segment
o add #defines for bits in the status register
o update cfi_wait_ready to take an offset so it can be used to wait for
PR write completion and replace constants w/ symbolic names
Note: writing the user segment isn't correct; committing now to get review.
Sponsored by: Carlson Wireless
Reviewed by: imp, Chris Anderson
in udp6_connect (td is already dereferenced elsewhere without such a
check). This makes the conversion from a sockaddr to a sockaddr_in6
always happen, so convert once at the beginning of the function rather
than twice in the middle.
Approved by: bz (mentor)
prison_check_ip4 and prison_check_ip6. As prison_if includes a jailed()
check, remove that check before calling rtm_get_jailed.
Approved by: bz (mentor)
When we leave the console TTY constantly open, we never reset the
termios attributes. This causes output processing, echoing, etc. not to
be reset to the proper values when going into single user mode after the
system has booted. It also causes nl-to-crnl-conversion not to take
place during shutdown, which causes a `staircase effect'.
This patch adds a new TTY flag, TF_OPENED_CONS, which is set when the
TTY is opened through /dev/console. Because the flags are only used by
the kernel and the pstat(8) utility, I've decided to renumber the TTY
flags. This shouldn't be an issue, because the TTY layer is not yet part
of a stable release.
Reported by: Mark Atkinson <atkin901 yahoo com>
Tested by: sepotvin
jail doesn't support. This involves a new function prison_check_af,
like prison_check_ip[46] but that checks only the family.
With this change, most of the errors generated by jailed sockets
shouldn't ever occur, at least until jails are changeable.
Approved by: bz (mentor)
return zero on success and an error code otherwise. The possible errors
are EADDRNOTAVAIL if an address being checked for doesn't match the
prison, and EAFNOSUPPORT if the prison doesn't have any addresses in
that address family. For most callers of these functions, use the
returned error code instead of e.g. a hard-coded EADDRNOTAVAIL or
EINVAL.
Always include a jailed() check in these functions, where a non-jailed
cred always returns success (and makes no changes). Remove the explicit
jailed() checks that preceded many of the function calls.
Approved by: bz (mentor)
called without calling vfs_busy() first. This made umount(8) hang waiting
for mnt_lockref to become zero, which would never happen.
Reviewed by: kib
Approved by: rwatson (mentor)
Reported by: pho
Found with: stress2
Sponsored by: FreeBSD Foundation
were used only for assertions, and rather than ifdef'ing them
INVARIANTS and using local variables, just directly access so_pcb.
Submitted by: Christoph Mallon <christoph dot mallon at gmx dot de>
MFC after: 1 week
while holding a spin mutex. Instead, it now shoves the machine check
records onto a queue that is later drained to add sysctl nodes for each
record. While a routine to drain the queue is present, it is not currently
called.
Reviewed by: marcel
Right now we only have a very small amount of drivers that use clists,
but we still allocate 50 cblocks as slush space, which allows drivers to
temporarily overcommit their storage. Most of the drivers don't allow
this anyway.
I've performed the following changes:
- We don't allocate any cblocks on startup.
- I've removed the DDB command, because it has nothing useful to print
now. You can obtain the amount of allocated blocks by running `vmstat
-m | grep clist'.
- I've removed cfreecount, which is now unused.
- The old code first tries to allocate using M_NOWAIT, followed by
M_WAITOK. This doesn't make any sense, so just remove this logic. It
seems the drivers allow us to sleep anyway.
We can even remove ccmax from clist_alloc_cblocks and c_cbmax from
struct clist, but this breaks binary compatibility.
This reduces the amount of allocated cblocks on my system from 54 to 4.
defrouter_select(), NULL the cached llentry after unlocking
as we are no longer interested in it and with the second
iteration would try to unlock it again resulting in
panic: Lock (rw) lle not locked @ ...
Reported by: Mark Atkinson <m.atkinson@f5.com>
Tested by: Mark Atkinson <m.atkinson@f5.com>
PR: kern/128247 (in follow-up, unrelated to original report)
turbo option in addition to the mode bits; otherwise if the current
channel is a turbo mode channel we'll form an invalid media setting
and the ifmedia_set operation in vap_attach will panic.
While here use C99-style initialization for an array indexed by mode;
this makes it consistent w/ other usage and avoids breakage if we
should ever change the set of modes.
is messing with the UDP tunnel. This means
that if two users actually tried to change the
tunnel port at the same time interesting things COULD
result, but its probably very unlikely to happen :-)
The TTY buffers used the standard <sys/queue.h> lists. Unfortunately
they have a big shortcoming. If you want to have a double linked list,
but no tail pointer, it's still not possible to obtain the previous
element in the list. Inside the buffers we don't need them. This is why
I switched to custom linked list macros. The macros will also keep track
of the amount of items in the list. Because it doesn't use a sentinel,
we can just initialize the queues with zero.
In its simplest form (the output queue), we will only keep two
references to blocks in the queue, namely the head of the list and the
last block in use. All free blocks are stored behind the last block in
use.
I noticed there was a very subtle bug in the previous code: in a very
uncommon corner case, it would uma_zfree() a block in the queue before
calling memcpy() to extract the data from the block.
o add bus shim for cfi driver
o add static mapping for CS0 (we map all 16M as the cfi driver doesn't
support demand mapping)
Note this needs some tweaking to work for 2358 boards which is why the
CAMBRIA config is not touched.
for slave addressing by using left-adjusted slave addresses (i.e.
xxxxxxx0b).
- Require the low bit of the slave address to always be zero in smb(4) to
help catch broken applications.
- Adjust some code in the IPMI driver to not convert the slave address for
SSIF to a right-adjusted address. I (or possibly ambrisko@) added this in
the past to (unknowingly) work around the bug in ichsmb(4).
Submitted by: Andriy Gapon <avg of icyb.net.ua> (1,2)
MFC after: 1 month
- Prepare for CRC offloading, add MIB counters (RS/MT).
- Bugfix: Disable CRC computation for IPv6 addresses with local scope (MT).
- Bugfix: Handle close() with SO_LINGER correctly when notifications
are generated during the close() call(MT).
- Bugfix: Generate DRY event when sender is dry during subscription.
Only for 1-to-1 style sockets (RS/MT)
- Bugfix: Put vtags for the correct amount of time into time-wait (MT).
- Bugfix: Clear vtag entries correctly on expiration (MT).
- Bugfix: shutdown() indicates ENOTCONN when called for unconnected
1-to-1 style sockets (MT).
- Bugfix: In sctp Auth code (PL).
- Add support for devices that support SCTP csum offload (igb).
- Add missing sctp_associd to mib sysctl xsctp_tcb structure (RS)
Obtained from: With help from Peter Lei and Michael Tuexen
we, like TCP and UDP, move the checksum calculation
into the IP routines when there is no hardware support
we call into the normal SCTP checksum routine.
The next round of SCTP updates will use
this functionality. Of course the IGB driver needs
a few updates to support the new intel controller set
that actually does SCTP csum offload too.
Reviewed by: gnn, rwatson, kmacy
mode.
- Make the NMI handler run on its own stack (TSS_IST2).
- Store the GSBASE value for each CPU just before the start of
each NMI stack, permitting efficient retrieval using %rsp-relative
addressing.
- For NMIs taken from kernel mode, program MSR_GSBASE explicitly
since one or both of MSR_GSBASE and MSR_KGSBASE can be potentially
invalid. The current contents of MSR_GSBASE are saved and restored
at exit.
- For NMIs handled from user mode, continue to use 'swapgs' to
load the per-CPU GSBASE.
Reviewed by: jeff
Debugging help: jeff
Tested by: gnn, Artem Belevich <artemb at gmail dot com>
device. The details include the current value of the BAR (including all
the flag bits and the current base address), its length, and whether or not
it is enabled. Since this operation is not invasive, non-root users are
allowed to use it (unlike manual config register access which requires
root). The intention is that userland apps (such as Xorg) will use this
interface rather than dangerously frobbing the BARs from userland to
obtain this information.
- Add a new sub-mode to the 'list' mode of pciconf. The -b flag when used
with -l will now list all the active BARs for each device.
(Missed in previous commit)
MFC after: 1 week
device. The details include the current value of the BAR (including all
the flag bits and the current base address), its length, and whether or not
it is enabled. Since this operation is not invasive, non-root users are
allowed to use it (unlike manual config register access which requires
root). The intention is that userland apps (such as Xorg) will use this
interface rather than dangerously frobbing the BARs from userland to
obtain this information.
- Add a new sub-mode to the 'list' mode of pciconf. The -b flag when used
with -l will now list all the active BARs for each device.
MFC after: 1 month
src/usr.bin/usbhidctl/usbhid.c
src/sys/dev/usb2/include/usb2_hid.h
src/sys/dev/usb2/input/uhid2.c
src/lib/libusbhid/Makefile
src/lib/libusbhid/descr.c
src/lib/libusbhid/descr_compat.c
src/lib/libusbhid/usbhid.3
src/lib/libusbhid/usbhid.h
src/lib/libusbhid/usbvar.h
Patches to make libusbhid and HID userland utilities compatible with
the new USB stack. All HID ioctls should go through the libusbhid
library to ensure compatibility. I have found at least one piece of
software in /usr/ports which needs to get updated before USB HID
devices will work. This is the X joystick input driver.
Reported and tested by:
Daichi GOTO and Masanori OZAWA.
src/sys/dev/usb2/core/usb2_process.c
Correct USB process names.
Reported by:
Andre Guibert de Bruet
src/sys/dev/usb2/serial/uftdi2.c
Integrate changes from old USB stack.
Submitted by: hps
Move the interupt handler to a driver_intr_t type function as it was trying
to do way to much for a lightweight filter interrupt function.
Introduce much more locking around fc->mtx. Tested this for lock reversals
and other such lockups. Locking seems to be working better, but there
is much more to do with regard to locking. The most significant lock is
in the BUS RESET handler. It was possible, before this checkin, to set
a bus reset via "fwcontrol -r" and have the BUS RESET handler fire before
the code responsible for asserting BUS RESET was complete. This locking
fixes that issue.
Move some of the memory allocations in the fc struct to the attach function
in firewire.c
Rework the businfo.generation indicator to be merely a on/off bit now.
It's purpose according to spec is to notify the bus that the config ROM
has changed. That's it.
Catch and squash a possible panic in SBP where in the SBP_LOCK was held
during a possible error case. The error handling code would definitely
panic as it would try to acquire the SBP_LOCK on entrance.
Catch and squash a camcontrol/device lockup when firewire drives go away.
When a firewire device was powered off or disconnected from the firewire
bus, a "camcontrol rescan all" would hang trying to poll removed devices
as they were not properly detached. Don't do that.
Approved by: scottl
MFC after: 2 weeks
channel, only accept a real 11g channel; this fixes a problem where we were
wrongly promoting 11b to a Dynamic Turbo G channel which broke scanning on
channel 6
from the inet6 stack along with statistics and make sure we
properly free the rt in all cases.
While the current situation is not better performance wise it
prevents panics seen more often these days.
After more inet6 and ipsec cleanup we should be able to improve
the situation again passing the rt to ip6_forward directly.
Leave the ip6_forward_rt entry in struct vinet6 but mark it
for removal.
PR: kern/128247, kern/131038
MFC after: 25 days
Committed from: Bugathon #6
Tested by: Denis Ahrens <denis@h3q.com> (different initial version)
that the annotated function returns a pointer that doesn't alias any
extant pointer. This results in a 50%+ speedup in microbenchmarks such
as the following:
char *cp = malloc(1), *buf = malloc(BUF);
for (i = 0; i < BUF; i++) buf[i] = *cp;
In real programs, your mileage will vary. Note that gcc already
performs this optimization automatically for any function called
`malloc', `calloc', `strdup', or `strndup' unless -fno-builtins is
used.
So we are no longer interested in the error returned from
the *fs_doio() functions. With that we can remove the
error variable as its value is unused now.
Submitted by: Christoph Mallon christoph.mallon@gmx.de
a locked route. Thus we have to use RTFREE_LOCKED(9) to get it unlocked
and rtfree(9)d rather than just rtfree(9)d.
Since the PR was filed, new places with the same problem were added
with new code. Also check that the rt is valid before freeing it
either way there.
PR: kern/129793
Submitted by: Dheeraj Reddy <dheeraj@ece.gatech.edu>
MFC after: 2 weeks
Committed from: Bugathon #6
Leave then in struct vinet6 to not break the ABI with kernel modules
but mark them for removal so we can do it in one batch when the time
is right.
MFC after: 1 month
work ok in C++. Note that we enable this only for gcc 4.x for any value
of x. The __null was introduced in gcc 4.1 (in fact it was commited
12 days after release of gcc 4.0) and as we have never released any version
of FreeBSD with gcc 4.0 nor ports support gcc 4.0.x this is a safe check.
Using __GNUC_PREREQ__ would require us to include cdefs.h in params.h so
we just check __GNUC__.
Approved by: kib (mentor)
Tested by: exp build of ports (done by pav)
Tested by: make universe (done by me)
more irqs as we have more cpus. This is principally useful on systems
with msi devices which may want many irqs per-cpu.
Discussed with: jhb
Sponsored by: Nokia
32-bit processes. The value matches the initial setting used by
FreeBSD/i386. Otherwise, 32-bit binaries using floating point would use
a slightly different initial state when run on FreeBSD/amd64.
MFC after: 1 week
After running a `make buildkernel', I noticed most of the Giant locks in
sysctl are only caused by a very small amount of sysctl's:
- sysctl.name2oid. This one is locked by SYSCTL_LOCK, just like
sysctl.oidfmt.
- kern.ident, kern.osrelease, kern.version, etc. These are just constant
strings.
- kern.arandom, used by the stack protector. It is already protected by
arc4_mtx.
I also saw the following sysctl's show up. Not as often as the ones
above, but still quite often:
- security.jail.jailed. Also mark security.jail.list as MPSAFE. They
don't need locking or already use allprison_lock.
- kern.devname, used by devname(3), ttyname(3), etc.
This seems to reduce Giant locking inside sysctl by ~75% in my primitive
test setup.
mutex to a reader/writer lock. Lookup operations first grab a read lock and
perform the lookup. If the operation results in a need to modify the cache,
then it tries to do an upgrade. If that fails, it drops the read lock,
obtains a write lock, and redoes the lookup.
pathname lookups.
- Remove 'i_offset' and 'i_ino' from the ISO node structure and replace
them with local variables in the lookup routine instead.
- Cache a copy of 'i_diroff' for use during a lookup in a local variable.
- Save a copy of the found directory entry in a malloc'd buffer after a
successfull lookup before getting the vnode. This allows us to release
the buffer holding the directory block before calling vget() which
otherwise resulted in a LOR between "bufwait" and the vnode lock.
- Use an inlined version of vn_vget_ino() to handle races with ..
lookups. I had to inline the code here since cd9660 uses an internal
vget routine to save a disk I/O that would otherwise re-read the
directory block.
- Honor the requested locking flags during lookups to allow for shared
locking.
- Honor the requested locking flags passed to VFS_ROOT() and VFS_VGET()
similar to UFS.
- Don't make every ISO 9660 vnode hold a reference on the vnode of the
underlying device vnode of the mountpoint. The mountpoint already
holds a suitable reference.
o remove HAL_CHANNEL; convert the hal to use net80211 channels; this
mostly involves mechanical changes to variable names and channel
attribute macros
o gut HAL_CHANNEL_PRIVATE as most of the contents are now redundant
with the net80211 channel available
o change api for ath_hal_init_channels: no more reglass id's, no more outdoor
indication (was a noop), anM contents
o add ath_hal_getchannels to have the hal construct a channel list without
altering runtime state; this is used to retrieve the calibration list for
the device in ath_getradiocaps
o add ath_hal_set_channels to take a channel list and regulatory data from
above and construct internal state to match (maps frequencies for 900MHz
cards, setup for CTL lookups, etc)
o compact the private channel table: we keep one private channel
per frequency instead of one per HAL_CHANNEL; this gives a big
space savings and potentially improves ani and calibration by
sharing state (to be seen; didn't see anything in testing); a new config
option AH_MAXCHAN controls the table size (default to 96 which
was chosen to be ~3x the largest expected size)
o shrink ani state and change to mirror private channel table (one entry per
frequency indexed by ic_devdata)
o move ani state flags to private channel state
o remove country codes; use net80211 definitions instead
o remove GSM regulatory support; it's no longer needed now that we
pass in channel lists from above
o consolidate ADHOC_NO_11A attribute with DISALLOW_ADHOC_11A
o simplify initial channel list construction based on the EEPROM contents;
we preserve country code support for now but may want to just fallback
to a WWR sku and dispatch the discovered country code up to user space
so the channel list can be constructed using the master regdomain tables
o defer to net80211 for max antenna gain
o eliminate sorting of internal channel table; now that we use ic_devdata
as an index, table lookups are O(1)
o remove internal copy of the country code; the public one is sufficient
o remove AH_SUPPORT_11D conditional compilation; we always support 11d
o remove ath_hal_ispublicsafetysku; not needed any more
o remove ath_hal_isgsmsku; no more GSM stuff
o move Conformance Test Limit (CTL) state from private channel to a lookup
using per-band pointers cached in the private state block
o remove regulatory class id support; was unused and belongs in net80211
o fix channel list construction to set IEEE80211_CHAN_NOADHOC,
IEEE80211_CHAN_NOHOSTAP, and IEEE80211_CHAN_4MSXMIT
o remove private channel flags CHANNEL_DFS and CHANNEL_4MS_LIMIT; these are
now set in the constructed net80211 channel
o store CHANNEL_NFCREQUIRED (Noise Floor Required) channel attribute in one
of the driver-private flag bits of the net80211 channel
o move 900MHz frequency mapping into the hal; the mapped frequency is stored
in the private channel and used throughout the hal (no more mapping in the
driver and/or net80211)
o remove ath_hal_mhz2ieee; it's no longer needed as net80211 does the
calculation and available in the net80211 channel
o change noise floor calibration logic to work with compacted private channel
table setup; this may require revisiting as we no longer can distinguish
channel attributes (e.g. 11b vs 11g vs turbo) but since the data is used
only to calculate status data we can live with it for now
o change ah_getChipPowerLimits internal method to operate on a single channel
instead of all channels in the private channel table
o add ath_hal_gethwchannel to map a net80211 channel to a h/w frequency
(always the same except for 900MHz channels)
o add HAL_EEBADREG and HAL_EEBADCC status codes to better identify regulatory
problems
o remove CTRY_DEBUG and CTRY_DEFAULT enum's; these come from net80211 now
o change ath_hal_getwirelessmodes to really return wireless modes supported
by the hardware (was previously applying regulatory constraints)
o return channel interference status with IEEE80211_CHANSTATE_CWINT (should
change to a callback so hal api's can take const pointers)
o remove some #define's no longer needed with the inclusion of
<net80211/_ieee80211.h>
Sponsored by: Carlson Wireless
Inside the kernel, the minor() function was responsible for obtaining
the device minor number of a character device. Because we made device
numbers dynamically allocated and independent of the unit number passed
to make_dev() a long time ago, it was actually a misnomer. If you really
want to obtain the device number, you should use dev2udev().
We already converted all the drivers to use dev2unit() to obtain the
device unit number, which is still used by a lot of drivers. I've
noticed not a single driver passes NULL to dev2unit(). Even if they
would, its behaviour would make little sense. This is why I've removed
the NULL check.
Ths commit removes minor(), minor2unit() and unit2minor() from the
kernel. Because there was a naming collision with uminor(), we can
rename umajor() and uminor() back to major() and minor(). This means
that the makedev(3) manual page also applies to kernel space code now.
I suspect umajor() and uminor() isn't used that often in external code,
but to make it easier for other parties to port their code, I've
increased __FreeBSD_version to 800062.
can cope with a result buffer of NULL in the "Final" function, we cannot.
Thus pass in a temporary buffer long enough for either md5 or sha1 results
so that we do not panic.
PR: bin/126468
MFC after: 1 week
section included a lot of stuff that did not belong there.
So split the block in multiple components each around the relevant stuff.
This said, I wonder if building a kernel where SYSCTL_NODE is not
defined is supported at all.
Submitted by: Marta Carbone
o max antenna gain
o driver private opaque data
Note this grows the size of a channel to 16 bytes; which makes the
default channel table 4Kbytes (up from 3Kbytes).
o change ioctl's that pass channel lists in/out to handle variable-size
arrays instead of a fixed (compile-time) value; we do this in a way
that maintains binary compatibility
o change ifconfig so all channel list data structures are now allocated
to hold MAXCHAN entries (1536); this, for example, allows the kernel
to return > IEEE80211_CHAN_MAX entries for calls like IEEE80211_IOC_DEVCAPS
the ISO tables, mark them accordingly
o add sku's for handling 900MHz cards
o add opaque struct defs and change []'s to *'s so this file can be
included w/o requiring all of net80211 to be pulled in
o make CTRY_DEBUG and CTRY_DEFAULT public
extended attributes since FreeBSD 5, make the following semantic
changes:
- Don't update the inode modification time (mtime) when extended
attributes (and hence also ACLs) are added, modified, or removed.
- Don't update the inode access tie (atime) when extended attributes
(and hence also ACLs) are queried.
This means that rsync (and related tools) won't improperly think
that the data in the file has changed when only the ACL has changed.
Note that ffs_reallocblks() has not been changed to not update on an
IO_EXT transaction, but currently EAs don't use the cluster write
routines so this shouldn't be a problem. If EAs grow support for
clustering, then VOP_REALLOCBLKS() will need to grow a flag argument
to carry down IO_EXT to UFS.
MFC after: 1 week
PR: ports/125739
Reported by: Alexander Zagrebin <alexz@visp.ru>
Tested by: pluknet <pluknet@gmail.com>,
Greg Byshenk <freebsd@byshenk.net>
Discussed with: kib, kientzle, timur, Alexander Bokovoy <ab@samba.org>
exceeded the maximum size of 1 page for OHCI controllers. Other serial
drivers use the same size, so I assume this should be enough (1MB/s
throughput?).
Make detach() completely synchronous. Properly handle stalled USB
transfers (use internal mechanism instead of submitting own control
transfers). Rename/remove a couple of variables and update comments.
This work was done in close collaboration with HPS.
Reviewed by: HPS
reimplementation of the same. Note that this changes -std=c99
to -std=iso9899:1999 but those two are synonyms.
Approved by: kib (mentor)
Reviewed by: ru
without corresponding number of fifo_open(). This causes assertion
failure in fifo_close() due to vp->v_fifoinfo being NULL for kernel
with INVARIANTS, or NULL pointer dereference otherwise. In fact, we may
ignore excess calls to fifo_close() without bad consequences.
Turn KASSERT() into the return, and print warning for now.
Tested by: pho
Reviewed by: rwatson
MFC after: 2 weeks
the PIC before the interrupt handler was set. If the interrupt triggered in
that window, then the interrupt vector would be disabled.
Reported by: Marco Trillo
Even though the code seems to be FreeBSD kernel code, it isn't compiled
on FreeBSD. I could have known this, because I was a little amazed that
I couldn't find a prototype of pfopen()/pfclose() somewhere else,
because it isn't marked as static.
Apart from that, removing these functions wouldn't have been harmful
anyway, because there are some other strange things about them (the
implementation isn't consistent with the prototype at the top). Still,
it's better to leave it, because it makes merging code back to older
branches a little harder.
Requested by: mlaier
It turns out I was patching functions that weren't used by pf(4) anyway.
They still seem to use `struct proc *' instead of `struct thread *'.
They weren't listed in pf_cdevsw.
Because it is not possible to access the pf(4) character device through
any other device node as the one in devfs, there is no need to check for
unknown device minor numbers.
Approved by: mlaier
an interpreter definition in its program header), set the auxiliary
ELF argument AT_BASE to 0 rather than to the address that we would
have mapped the interpreter at if there had been one.
The ELF ABI specifications appear to be ambiguous as to the desired
behavior in this situation, as they define AT_BASE as the base address
of the interpreter, but do not mention what to do if there is none.
On Solaris, AT_BASE will be set to the base address of the static
binary if there is no interpreter, and on Linux, AT_BASE is set to 0.
We go with the Linux semantics as they are of more immediate utility
and allow the early runtime environment to know that the kernel has
not mapped an interpreter, but because AT_PHDR points at the ELF
header for the running binary, it is still possible to retrieve all
required mapping information when the process starts should it be
required. Either approach would be preferable to our current behavior
of passing a pointer to an unmapped region of user memory as AT_BASE.
MFC after: 3 weeks
backend kegs so it may source compatible memory from multiple backends.
This is useful for cases such as NUMA or different layouts for the same
memory type.
- Provide a new api for adding new backend kegs to secondary zones.
- Provide a new flag for adjusting the layout of zones to stagger
allocations better across cache lines.
Sponsored by: Nokia
sizeof("MAXCPU") being used to calculate a string length rather than
something more reasonable such as sizeof("32"). This shouldn't have
caused any ill effect until we run on machines with 1000000 or more
cpus.
the vap ioctl. This means that the parent interface should hopefully be up
before we return to userland, it does not depend on the parent init succeeding,
just that it was run.
This fixes wpa_supplicant with ndis and USB where the parent interfaces can be
slow to init.
- Restructure selscan() and selrescan() to avoid producing extra selfps
when we have a fd in multiple sets. As described below multiple selfps
may still exist for other reasons.
- Make selrescan() tolerate multiple selfds for a given descriptor
set since sockets use two selinfos per fd. If an event on each selinfo
fires selrescan() will see the descriptor twice. This could result in
select() returning 2x the number of fds actually existing in fd sets.
Reported by: mgleason@ncftp.com
Now that make_dev() doesn't require unit numbers to be unique, there is
no need to use an unrhdr here to generate the numbers. Remove the entire
init-routine, because it is optional.
pointers to the callout handler just before and just after the callout
it invoked. I attempted to do this in a manner congruent to tracing in
Solaris's callout mechanism, but couldn't quite use the same names due
to convention and syntax differences.
Example DTrace script to generate a distribution graph of callout
execution times:
callout_execute:::callout_start
{
self->cstart = timestamp;
}
callout_execute:::callout_end
{
@length = quantize(timestamp - self->cstart);
}
Reviewed by: jb
MFC after: 3 days
inside the SYSCTL() macros and thus does not need to be done for
all of the nodes scattered across the source tree.
- Mark the name-cache related sysctl's (including debug.hashstat.*) MPSAFE.
- Mark vm.loadavg MPSAFE.
- Remove GIANT_REQUIRED from vmtotal() (everything in this routine already
has sufficient locking) and mark vm.vmtotal MPSAFE.
- Mark the vm.stats.(sys|vm).* sysctls MPSAFE.
around calls to vlrureclaim() on non-MPSAFE filesystems. Specifically,
vnlru no longer needs Giant for the common case of waking up and deciding
there is nothing for it to do.
MFC after: 2 weeks
rather than a fixed 512... This fixes the mount root problem on at91.
Prior to the SD card reorg, all data transfers were 512 bytes, so we
didn't notice.
the serial port class when we set the devclass since it is now
no-longer a compile time constant. Eliminate the pci include, as it
isn't relevant or necessary.
time constant. This allows us to potentially change it at runtime or
autodetect it early in the boot (the latter being much more likely to
have a good outcome).
- To avoid having a bunch of locks that end up always getting acquired as
a group, give each ppc(4) device a mutex which it shares with all the
child devices including ppbus(4), lpt(4), plip(4), etc. This mutex
is then used for all the locking.
- Rework the interrupt handling stuff yet again. Now ppbus drivers setup
their interrupt handler during attach and tear it down during detach
like most other drivers. ppbus(4) only invokes the interrupt handler
of the device that currently owns the bus (if any) when an interrupt
occurs, however. Also, interrupt handlers in general now accept their
softc pointers as their argument rather than the device_t. Another
feature of the ppbus interrupt handlers is that they are called with
the parent ppc device's lock already held. This minimizes the number
of lock operations during an interrupt.
- Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE.
- lpbb(4) uses the ppc lock instead of Giant.
- Other plip(4) changes:
- Add a mutex to protect the global tables in plip(4) and free them on
module unload.
- Add a detach routine.
- Split out the init/stop code from the ioctl routine into separate
functions.
- Other lpt(4) changes:
- Use device_printf().
- Use a dedicated callout for the lptout timer.
- Allocate the I/O buffers at attach and detach rather than during
open and close as this simplifies the locking at the cost of
1024+32 bytes when the driver is attached.
- Other ppi(4) changes:
- Use an sx lock to serialize open and close.
- Remove unused HADBUS flag.
- Add a detach routine.
- Use a malloc'd buffer for each read and write to avoid races with
concurrent read/write.
- Other pps(4) changes:
- Use a callout rather than a callout handle with timeout().
- Conform to the new ppbus requirements (regular mutex, non-filter
interrupt handler). pps(4) is probably going to have to become a
standalone driver that doesn't use ppbus(4) to satisfy it's
requirements for low latency as a result.
- Use an sx lock to serialize open and close.
- Other vpo(4) changes:
- Use the parent ppc device's lock to create the CAM sim instead of
Giant.
- Other ppc(4) changes:
- Fix ppc_isa's detach method to detach instead of calling attach.
Tested by: no one :-(
Some time ago I tried adding Unicode rendering to the teken demo
application, but I didn't get it working. It seems I forgot to call
setlocale(). Polish this code and make sure it doesn't get lost.
Also a small fix for my previous commit: all Unicode characters in
teken_boxdrawing are below 0x10000, so store them as 16-bit values.
o Only set 4-bit caps on those boards that have 4-bit caps (this means that
because we don't set wire4 yet, this forces us to always use 1-bit bus).
o Don't test wire4 when setting up the bus width, since bad things will
happen if we do.
# This likely won't fix the busted at91 sd card support, but these are
# needful changes for correctness.
the helper function. It is supposed to be useful for any filesystem
that has to unlock dvp to walk to the ".." entry in lookup routine.
Requested by: jhb
Tested by: pho
MFC after: 1 month
VOP_MARKATIME() since unlike the rest of VOP_SETATTR(), VA_MARKATIME
can be performed while holding a shared vnode lock (the same functionality
is done internally by VOP_READ which can run with a shared vnode lock).
Add missing locking of the vnode interlock to the ufs implementation and
remove a special note and test from the NFS client about not supporting the
feature.
Inspired by: ups
Tested by: pho
section of code, this uses WITNESS_NORELEASE() and WITNESS_RELEASEOK() to mark
the boundaries. Both functions require the lock to be held when calling.
This is intended for scenarios like a bus asserting that the bus lock is not
dropped during a driver call. There doesn't appear to be a man page to
document this in.
Reviewed by: jhb
indirect block pages are not removed by the mentioned invocation of
the vnode_pager_setsize().
Put a common code into the helper function ffs_pages_remove().
Reported and tested by: dchagin
Reviewed by: ups
MFC after: 3 weeks
- Always program RX configuration register from scratch instead of
doing read/modify/write.
- Rename re_setmulti() to re_set_rxmode() to be reflect reality.
- Simplify hash filter logic a little while I am here.
Reviewed by: yongari (early version)
the fsbase value. The switch loads the fs segment register, that
invalidates the value in fsbase msr, thus value in %r9 can not be
considered the current value for fsbase anymore.
Unconditionally reload fsbase when switching to 32bit binary.
PR: 130526
MFC after: 3 weeks
Even though VT100-like devices can display non-ASCII characters, they do
not use an 8-bit character set. Special escape sequences allow the VT100
to switch character maps. The special graphics character set stores the
box drawing characters, starting at 0x60, ending at 0x7e. This means
we now pass the character map tests in vttest, even the save/restore
cursor test, combined with character maps. dialog(1) also works a lot
better now.
This commit also includes some other minor fixes:
- Default to 24 lines in teken_demo when using xterm emulation.
- Make white foreground and background work in teken_demo.
address space where to put vnode pages, and then call UFS_BALLOC(),
to actually allocate new block and map it. When UFS_BALLOC() returns
error, sometimes we forget to revert the vm object size increase,
allowing for the pages that are not backed by the logical disk blocks.
Revert vnode_pager_setsize() back when UFS_BALLOC() failed, for
ffs_truncate() and ffs_write().
PR: 129956
Reviewed by: ups
MFC after: 3 weeks
vnode, from -1 down. When vinvalbuf(vp, V_ALT) is done for the vnode, it
incorrectly does vm_object_page_remove(0, 0), removing all pages from
the underlying vm object, not only the pages that back the extended
attributes data.
Change vinvalbuf() to not remove any pages from the object when
V_NORMAL or V_ALT are specified. Instead, the only in-tree caller
in ffs_inode.c:ffs_truncate() that specifies V_ALT explicitely
removes the corresponding page range. The V_NORMAL caller
does vnode_pager_setsize(vp, 0) immediately after the call to
vinvalbuf(V_NORMAL) already.
Reported by: csjp
Reviewed by: ups
MFC after: 3 weeks
In normal operation, the number of cache entries is roughly equal to the
number of active vnodes. However, when most of the recently accessed
vnodes have many hard links, the number of cache entries can be 32000
times as large, exhausting kernel memory and provoking a panic in
kmem_malloc().
MFC after: 2 weeks
very well maintained and point user to sysutils/fusefs-ntfs, which
at the time of this writing seems to be a better alternative.
Suggested by: luigi
MFC after: 2 weeks
of superblock rather than using hardcoded values. This fixes ext2fs on
filesystems with inode sized other than 128.
Submitted by: Alex Lyashkov <Alexey.Lyashkov@Sun.COM> (based on)
MFC after: 2 weeks
Cons25 doesn't seem to use a straight 1:1 mapping to the ANSI colors,
but uses the same color numbers as at least used by syscons on i386. I
suspect if you change the definitions on a different architecture,
things may break? Not sure.
Add a small array to convert syscons-style color codes to ANSI
equivalents, which are used by libteken internally. I didn't notice this
bug, because I only tested my code with black, white and green, all of
them shared the same numbers.
It turns out I forgot to implement two escape sequences that allows the
user to change the default foreground and background colors. I thought
they were implemented by syscons itself, but vidcontrol just generates
some escape sequences, which get interpreted by the terminal emulator.
Reported by: mgp (forums)
The teken library already supports UTF-8 handling and xterm emulation,
but we have reasons to disable this right now. Because we should make it
easy and interesting for people to experiment with these features, allow
them to be set in kernel configuration files.
Before this commit we had a flag called `TEKEN_CONS25' to enable
cons25-style emulation. I'm calling it the opposite now, `TEKEN_XTERM',
because we want to enable it in kernel configuration files explicitly.
Requested by: kib
with src/tools/sched/schedgraph.py. This allows developers to quickly
create a graphical view of ktr data for any resource in the system.
- Add sched_tdname() and the pcpu field 'name' for quickly and uniformly
identifying records associated with a thread or cpu.
- Reimplement the KTR_SCHED traces using the new generic facility.
Obtained from: attilio
Discussed with: jhb
Sponsored by: Nokia
by writing all 1's to it to determine its length. This fixes issues with
MCFG on at least some machines where a trashed BAR claimed subsequent
attempts at PCI config transactions because the addresses in the MCFG
window fell in the decoding range of the BAR.
In general it is a bad idea to leave the BARs enabled while we are
frobbing with them in this manner.
Sleuthing by: tegge
MFC after: 1 week
The digi(4) driver directory contains some files that cannot be checked
out on Windows filesystems. This isn't a big deal, but the files aren't
used anyway.
There are still some other places where checkouts on Windows don't work,
such as VFS_MOUNT.9/vfs_mount.9. This should already be a small
improvement.
MFC after: 1 month
check on the sysctl argument value being RTF_LLINFO is conditioned on
the COMPAT_ROUTE_FLAGS kernel option. This mismatch caused the L2
table retrieval failure, and the arp/ndp -an command displays empty L2
tables.
Reviewed by: pjd
work when the bus attaches its own children. Instead of hardcoding a unit
number and returning BUS_PROBE_NOWILDCARD, which will break multiple iicbus
systems, check in the probe routine whether the device address is 0. Real
I2C devices will never have this address, but devices added with
BUS_ADD_CHILD() will.
Requested by: jhb
Reviewed by: jhb
- Add debug output
- Fix pmap_zero_page and related places: use uncached segments and invalidate
cache after zeroing memory.
- Do not test for modified bit if it's not neccessary
(merged from mips-juniper p4 branch)
- Some #includes reorganization
guarantee atomicity of the operation for other semaphore consumers.
In particular, this should guard against access to the semaphore with
not done or partially done MAC label assignment.
Reviewed by: rwatson
MFC after: 1 month
heavy loads or working. It looks this bug exists since r158869
so needs to revert a part of the previous.
Reviewed by: imp
Tested by: sam
MFC after: 3 weeks
So now, if you:
- specify "makeoptions DEBUG=-g" in your kernel config
- make buildkernel WITH_CTF=1,
then "-g" will be added to CTFFLAGS.
However, "-g" will still not be added to CTFFLAGS when building
kernel modules, if the above steps are performed. This needs to be fixed.
Noticed by: thompsa
The new behaviour is on by default, and can be disabled by setting the
net.inet.tcp.rfc3465 sysctl to 0 to obtain previous behaviour.
The patch changes struct tcpcb in sys/netinet/tcp_var.h which breaks
the ABI. Bump __FreeBSD_version to 800061 accordingly. User space tools
that rely on the size of struct tcpcb (e.g. sockstat) need to be recompiled.
Reviewed by: rpaulo, gnn
Approved by: gnn, kmacy (mentors)
Sponsored by: FreeBSD Foundation
power and thermal control, as well as GPIOs on Xserves and controlling
sound codecs for Apple built-in audio.
Submitted by: Marco Trillo
Obtained from: NetBSD
indicated I2C devices, and provides an ofw_bus interface for driver probing.
This should be MI, but is currently provided only on PowerPC due to lack of
sparc64 hardware with an I2C controller.
Discussed on: freebsd-arch
utilities, add the ${DEBUG} variable from the kernel config. Otherwise,
if we build a kernel with WITH_CTF=1 set, ctfmerge will not have
the -g flag set. In this case, the cc has -g specified, so the
.o files will have debug information generated, but since ctfmerge
does not have -g set, it will strip out the ELF sections containing
the DWARF debugging info, leading to a kernel without debugging symbols.
Reviewed by: jb
on SysV semaphores.
The squeeze of the semaphore array in the kern_semctl() modifies
sem_base for the semaphores with sem_base greater then sem_base of
the removed semaphore, as well as the values of the semaphores,
without locking their mutex. This can lead to (killable) hangs or
unexpected behaviour of the processes performing any sem operations
while other process does IPC_RMID.
The semexit_myhook() eventhandler unlocks SEMUNDO_LOCK() while
accessing *suptr. This allows for IPC_RMID for the sem id to be
performed in parallel with undo hook referenced by the current undo
structure. This leads to the panic("semexit - semid not allocated") [1].
The semaphore creation is protected by Giant, while IPC_RMID is done
while only semaphore mutex is held. This seems to result in invalid
values for semtot, causing random ENOSPC error returns [2].
Redo the locking of the semaphores lifetime cycle. Delegate the
sem_mtx to the sole purpose of protecting semget() and
semctl(IPC_RMID). Introduce new sem_undo_mtx to protect SEM_UNDO
handling. Remove the Giant remnants from the code.
Note that mac_sysvsem_check_semget() and mac_sysvsem_create() are
now called while sem_mtx is held, as well as mac_sysvsem_cleanup() [3].
When semaphore is removed, acquire semaphore locks for all semaphores
with sem_base that is going to be changed by squeeze of the sema
array. The lock order is not important there, because the region is
protected by sem_mtx.
Organize both used and free sem_undo structures into the lists,
protected by sem_undo_mtx. In semexit_myhook(), remove sem_undo
structure that is being processed, from used list, without putting it
onto the free to prevent modifications by other threads. This allows
for sem_undo_lock to be dropped to acquire individial semaphore locks
without violating lock order. Since IPC_RMID may no longer find this
sem_undo, do tolerate references to unallocated semaphores in undo
structure, and check sequential number to not undo unrelated semaphore
with the same id.
While there, convert functions definitions to ANSI C and fix small
style(9) glitches.
Reported by: Omer Faruk Sen <omerfsen gmail com> [1], pho [2]
Reviewed by: rwatson [3]
Tested by: pho
MFC after: 1 month
contrib/openbsm (svn merge) and src/sys/{bsm,security/audit} (manual
merge). Hook up bsm_domain.c and bsm_socket_type.c to the libbsm
build along with man pages, add audit_bsm_domain.c and
audit_bsm_socket_type.c to the kernel environment.
OpenBSM history for imported revisions below for reference.
MFC after: 1 month
Sponsored by: Apple Inc.
Obtained from: TrustedBSD Project
OpenBSM 1.1 alpha 5
- Stub libauditd(3) man page added.
- All BSM error number constants with BSM_ERRNO_.
- Interfaces to convert between local and BSM socket types and protocol
families have been added: au_bsm_to_domain(3), au_bsm_to_socket_type(3),
au_domain_to_bsm(3), and au_socket_type_to_bsm(3), along with definitions
of constants in audit_domain.h and audit_socket_type.h. This improves
interoperability by converting local constant spaces, which vary by OS, to
and from Solaris constants (where available) or OpenBSM constants for
protocol domains not present in Solaris (a fair number). These routines
should be used when generating and interpreting extended socket tokens.
- Fix build warnings with full gcc warnings enabled on most supported
platforms.
- Don't compile error strings into bsm_errno.c when building it in the kernel
environment.
- When started by launchd, use the label com.apple.auditd rather than
org.trustedbsd.auditd.
for jumbo frame.
o Nuke unneeded jlist lock which was used to protect jumbo buffer
management in local allocator.
o Added a new tunable hw.mskc.jumbo_disable to disable jumbo
frame support for the driver. The tunable could be set for
systems that do not need to use jumbo frames and it would
save (9K * number of Rx descriptors) bytes kernel memory.
o Jumbo buffer allocation failure is no longer critical error
for the operation of msk(4). If msk(4) encounter the allocation
failure it just disables jumbo frame support and continues to
work without your intervention.
Using local allocator had several drawbacks such as requirement of
large amount of continuous kernel memory and fixed (small) number
of available buffers. The need for large continuous memory resulted
in failure of loading driver with kldload on running systems.
Also small number of buffer used in local allocator showed poor
performance for some applications.
to be caused by a metadata corruption that occurs quite often after
unplugging a pendrive during write activity.
Reviewed by: scottl
Approved by: rwatson (mentor)
Sponsored by: FreeBSD Foundation
Add missing set frame data pointer call. The
function call was missed when zero copy was
introduced in UMASS.
Reported by: WATANABE Kazuhiro.
Submitted by: Hans Petter Selasky
Remove dependancy towards the USB config thread in
the USB serial core. Use USB process msignalling
instead. Saves a little memory and hopefully makes
the code more understandable.
Submitted by: Hans Petter Selasky
Remove "vbus_interrupt" method from bus methods and use
a global function instead for the various drivers using it.
The reason for the removal is to simplify the code.
Submitted by: Hans Petter Selasky
Reduce the number of callback processes to 4 per
USB controller. There are two rough categories:
1) Giant locked USB transfers.
2) Non-Giant locked USB transfers.
On a real system with many USB devices plugged in the
number of processes reported by "ps auxw | grep USBPROC"
was reduced from 40 to 18.
Submitted by: Hans Petter Selasky
This change is about removing three fields from "struct usb2_xfer"
which can be reached from "struct usb2_xfer_root" instead and cleaning
up the code after this change. The fields are "xfer->udev",
"xfer->xfer_mtx" and "xfer->usb2_sc". In this process the following
changes were also made:
Rename "usb2_root" to "xroot" which is short for "xfer root".
Rename "priv_mtx" to "xfer_mtx" in USB core.
The USB_XFER_LOCK and USB_XFER_UNLOCK macros should only be used in
the USB core due to dependency towards "xroot". Substitute macros
for the real lock in two USB device drivers.
Submitted by: Hans Petter Selasky
Factor out roothub process into the USB bus structure for
all USB controller drivers. Essentially I am trying to
save some processes on the root HUB and get away
from the config thread pradigm. There will be a follow up
commit where the root HUB control and interrupt callback
will be moved over to run from the roothub process.
Total win: 3 processes become 1 for every USB controller.
Submitted by: Hans Petter Selasky
Usability improvement. Make sure that setting
power mode ON resurrects the device if powered OFF.
Reported by: Alexander Best.
Submitted by: Hans Petter Selasky
Initial version of ATMEGA USB device controller
driver. Has not been tested on real hardware yet.
The driver is based upon the AT91DCI driver.
Submitted by: Hans Petter Selasky
o Eliminate tlb0[] (a s/w copy of TLB0)
- The table contents cannot be maintained reliably in multiple MMU
environments, where asynchronous events (invalidations from other cores)
can change our local TLB0 contents underneath.
- Simplify and optimize TLB flushing: system wide invalidations are
performed using tlbivax instruction (propagates to other cores), for
local MMU invalidations a new optimized routine (assembly) is introduced.
o Improve and simplify TID allocation and management.
- Let each core keep track of its TID allocations.
- Simplify TID recycling, eliminate dead code.
- Drop the now unused powerpc/booke/support.S file.
o Improve page tables management logic.
o Simplify TLB1 manipulation routines.
o Other improvements and polishing.
Obtained from: Freescale, Semihalf
- add a reference to the config(5) manpage;
- hopefully clarify the format of the 'env FILENAME' directive.
I am putting these notes in sys/${arch}/conf/GENERIC and not
in sys/conf/NOTES because:
1. i386/GENERIC already had reference to a similar option (hints..)
and to documentation (handbook)
2. GENERIC is what most users look at when they have to modify or
create a new kernel config, so having the suggestion there is
more effective.
I am only touching i386 and amd64 because the other GENERIC files
are already out of sync, and I am not sure what is the overall plan.
MFC after: 3 days
down will cause a fault. Check the phy power state before possibly
reading from the bb, this can happen as ar5212Reset intentionally
calls ar5212GetRfgain before bringing the bb out of reset (but we
do it here and not in the caller to guard against other possible uses).
expected in acd_fixate().
This should fix various problems folks are having with 'burncd' reporting
"burncd: ioctl(CDRIOCFIXATE): Input/output error" during the fixate phase
when "fixate" is issued together with the "data" command.
PR: 95979
Submitted by: Jaakko Heinonen <jh@saunalahti.fi>
by the new kernel option COMPAT_ROUTE_FLAGS for binary backward
compatibility. The RTF_LLDATA flag maps to the same value as RTF_LLINFO.
RTF_LLDATA is used by the arp and ndp utilities. The RTF_LLDATA flag is
always returned to the userland regardless whether the COMPAT_ROUTE_FLAGS
is defined.
changes since the last imported OpenBSM release:
OpenBSM 1.1 alpha 5
- Stub libauditd(3) man page added.
- All BSM error number constants with BSM_ERRNO_.
- Interfaces to convert between local and BSM socket types and protocol
families have been added: au_bsm_to_domain(3), au_bsm_to_socket_type(3),
au_domain_to_bsm(3), and au_socket_type_to_bsm(3), along with definitions
of constants in audit_domain.h and audit_socket_type.h. This improves
interoperability by converting local constant spaces, which vary by OS, to
and from Solaris constants (where available) or OpenBSM constants for
protocol domains not present in Solaris (a fair number). These routines
should be used when generating and interpreting extended socket tokens.
- Fix build warnings with full gcc warnings enabled on most supported
platforms.
- Don't compile error strings into bsm_errno.c when building it in the kernel
environment.
- When started by launchd, use the label com.apple.auditd rather than
org.trustedbsd.auditd.
Obtained from: TrustedBSD Project
Sponsored by: Apple Inc.
in the loopback and synthetic loopback code so that packets are
access control checked and relabeled. Previously, the MAC
Framework enforced that packets sent over the loopback weren't
relabeled, but this will allow policies to make explicit choices
about how and whether to relabel packets on the loopback. Also,
for SIMPLEX devices, this produces more consistent behavior for
looped back packets to the local MAC address by labeling those
packets as coming from the interface.
Discussed with: csjp
Obtained from: TrustedBSD Project
things around so the periph destructors look alike. Based on a patch
by Jaakko Heinonen.
Submitted by: Jaakko Heinonen
Reviewed by: scottl
Approved by: rwatson (mentor)
Sponsored by: FreeBSD Foundation
they label, derive that information implicitly from the set of label
initializers in their policy operations set. This avoids a possible
class of programmer errors, while retaining the structure that
allows us to avoid allocating labels for objects that don't need
them. As before, we regenerate a global mask of labeled objects
each time a policy is loaded or unloaded, stored in mac_labeled.
Discussed with: csjp
Suggested by: Jacques Vidrine <nectar at apple.com>
Obtained from: TrustedBSD Project
Sponsored by: Apple, Inc.
read with libkvm) to the addresses of a prison, when inside a
jail. [1]
As the patch from the PR was pre-'new-arp', add checks to the
llt_dump handlers as well.
While touching RTM_GET in route_output(), consistently use
curthread credentials rather than the creds from the socket
there. [2]
PR: kern/68189
Submitted by: Mark Delany <sxcg2-fuwxj@qmda.emu.st> [1]
Discussed with: rwatson [2]
Reviewed by: rwatson
MFC after: 4 weeks
applications to specify a non-local IP address when bind()'ing a socket
to a local endpoint.
This allows applications to spoof the client IP address of connections
if (obviously!) they somehow are able to receive the traffic normally
destined to said clients.
This patch doesn't include any changes to ipfw or the bridging code to
redirect the client traffic through the PCB checks so TCP gets a shot
at it. The normal behaviour is that packets with a non-local destination
IP address are not handled locally. This can be dealth with some IPFW hackery;
modifications to IPFW to make this less hacky will occur in subsequent
commmits.
Thanks to Julian Elischer and others at Ironport. This work was approved
and donated before Cisco acquired them.
Obtained from: Julian Elischer and others
MFC after: 2 weeks
jail-aware. Up to now we returned the first address of the interface
for SIOCGIFADDR w/o an ifr_addr in the query. This caused problems for
programs querying for an address but running inside a jail, as the
address returned usually did not belong to the jail.
Like for v6, if there was an ifr_addr given on v4, you could probe
for more addresses on the interfaces that you were not allowed to see
from inside a jail. Return an error (EADDRNOTAVAIL) in that case
now unless the address is on the given interface and valid for the
jail.
PR: kern/114325
Reviewed by: rwatson
MFC after: 4 weeks
- The contents of 'feroceon_cpufuncs' dispatch table was really dedicated for the
new Sheeva CPU (in 88F6xxx and MV-78xxx SOCs), and NOT Feroceon.
- Feroceon CPU (in 88F5xxx SOCs) appears as a regular ARM926EJ-S core and does
not require dedicated routines.
This will be accompanied by a file rename commit.
- Provide dedicated rmans for MEM and IO resources.
- Convert PCI IRQ routing info into a table (from callback approach), provide
config data for alternative DB- boards.
- Fix a wrong boundary check error in pcib_mbus_init_bar()
Obtained from: Semihalf
- Allow for setting per platform MPP/GPIO configuration in the kernel, so
that we can override all settings firmware might set.
- Set decode windows for the remaining on-chip peripherals: CESA, SATA and XOR.
- Improve handling of USB controllers so that all port are available on the
given SOC/platform (e.g. up to three on DB-78xxx), this includes rework of
USB decode windows set-up.
- Other minor fixes and cosmetics.
Obtained from: Semihalf
created by atapicam is being kept opened or mounted. This is probably just
a temporary solution until we invent something better.
Reviewed by: scottl
Approved by: rwatson (mentor)
Sponsored by: FreeBSD Foundation
Reported by: Jaakko Heinonen
o add net80211 support for a tdma vap that is built on top of the
existing adhoc-demo support
o add tdma scheduling of frame transmission to the ath driver; it's
conceivable other devices might be capable of this too in which case
they can make use of the 802.11 protocol additions etc.
o add minor bits to user tools that need to know: ifconfig to setup and
configure, new statistics in athstats, and new debug mask bits
While the architecture can support >2 slots in a TDMA BSS the current
design is intended (and tested) for only 2 slots.
Sponsored by: Intel
- Clean up TCLK handling so that it's dynamically recognized depending on
registers settings or chip version/revision. Update registers definitions.
- Teach SOC ident routine about A0 (initial silicon version for general
audience)
Obtained from: Marvell, Semihalf
locked. Lookup could attempt to recursively lock that vnode.
Do not call vn_start_write(V_WAIT) while vnode is locked, this may
result in a deadlock with suspension.
vfs_busy() the mountpoint before dropping vnode lock for vnode
that was used to look up the mountpoint, to prevent unmount in
between.
Reported and tested by: pho
Reviewed by: rwatson
MFC after: 3 weeks
This fixes problems with discovering some USB devices that are very slow to
respond during initialisation.
When a USB device is inserted, CAM performs the sequence:
1) INQUIRY
2) INQUIRY (second time with other parameters)
3) TEST UNIT READY
4) READ CAPACITY
Before this change CAM didn't check if TEST UNIT READY was successful and went
on blindly to the next state and sent READ CAPACITY. If the device was still
not ready by then, CAM ended with error message. This patch adds checking for the
status of TEST UNIT READY command and retrying up to 10 times with 0.5 sec
interval.
Submitted by: Grzegorz Bernacki gjb ! semihalf dot com
Reviewed by: scottl
1.Sync TD on close to ensure USB request in close callback issued.
2.Add sysctls to indicate device role.
3.Enable handsfree port support.
Now modem port and obex port works well.
Handsfree port works but not with good response.
When trying to read scratched or damaged CDs and DVDs, the default
mechanism is sub-optimal. Programs like ddrescue do much better if
you turn off retries entirely, since their algorithms are designed
scan big areas fast, then winnow the areas down. Turning off retries
speeds these programs up by as much as 20x, since the drive is able to
'stream past' many small errors...
The sysctl/tunable kern.cam.cd.retry_count controls this. That
defaults to '4' (for a total of 5 attempts). Setting to 0 turns off
all retry attempts.
Reviewed by: scottl@
specifically SPI controllers now also work in big-endian
machines and some conversions relevant for FC and SAS
controllers as well as support for ILP32 machines which all
were omitted in previous attempts are now also implemented.
The IOCTL-interface is intentionally left (and where needed
actually changed) to be completely little-endian as otherwise
we would have to add conversion code for every possible
configuration page to mpt(4), which didn't seem the right
thing to do, neither did converting only half of the user-
interface to the native byte order.
This change was tested on amd64 (SAS+SPI), i386 (SAS) and
sparc64 (SAS+SPI). Due to lack of the necessary hardware
the target mode code is still left to be made endian-clean.
Reviewed by: scottl
MFC after: 1 month
functions and stop attaching of dcons(4) and dcons_crom(4) if
they indicate failure. This fixes a panic seen on sparc64 machines
with no free physical memory in the requested 32-bit region but
still doesn't make dcons(4)/dcons_crom(4) these work. I think
the latter can be fixed by simply specifying ~0UL as the upper
limit for contigmalloc(9) and letting the bounce pages and the
IOMMU respectively handle limitations of the DMA engine. I didn't
want to change that without the consensus of simokawa@ though,
who unfortunately didn't reply so far.
MFC after: 1 week
installing the kernel allows one, like with modules, to override
the default user/group and install as non-su to a temporary
directory to test, create images or seed a tftp dir.
Reviewed by: Andrzej Tobola <ato@iem.pw.edu.pl>
MFC after: 4 weeks
module. These files cause manual interaction when building
ports/audio/aureal-kmod which provides a usable i386-only driver (it requires
linking against some linux object files distributed by vendor which bankrupted
back in 2000).
MFC after: 1 week
subclasses as are available with PCI. Changes I2C device drivers without
real probe logic to return BUS_PROBE_NOWILDWARD to avoid interference with
firmware bus enumeration, and reduces the probe priority of the iicbus
base driver to allow subclass attachment at higher priority.
Discussed on: freebsd-arch
lock in order to avoid the lock acquire hit if the pipe list is very
likely empty.
Obtained from: TrustedBSD Project
MFC after: 3 weeks
Sponsored by: Apple, Inc.
allowing the full 16-bit width of the corresponding fields in the
VTOC8 label to be used. The removed limits basically only held
true for providers labeled using the synthetic geometry provided
by cam_calc_geometry(9) but neither SCSI disks labeled with Solaris
nor sufficiently large ATA disks.
- Given that providers (originally) labeled with Solaris typically
use the native geometry as reported by the target while FreeBSD
typically uses a synthetic one put the message complaining about
mismatching geometries between what the label indicates and what
GEOM thinks the provider has, which we generally can't help,
under bootverbose in order to not unnecessarily scare users.
- For informational purposes add the non-matching values to the
message complaining about them, similar to what r186501 did for
g_part_bsd_read() except also indicating the origin of the
values.
- Make it clear that the messages emitted by this code refer to
the VTOC8 support rather than to another existing scheme or to
VTOC32.
record is active on the current thread--historically we may always
have wanted to enter the audit code if auditing was enabled, but now
we just commit the audit record so don't need to enter if there isn't
one.
Obtained from: TrustedBSD Project
Sponsored by: Apple, Inc.
the KASSERT and checks suggested.
Reviewed by: The udp tunneling was discussed on net@ under the
thread entitled "Heads up -- Thinking about UDP and tunneling"
- Remove unused typedefs to avoid confusion and ease in merging
ip6protosw with protosw.
- Correct a few comments.
- Remove most of a comment about usrreq. [1]
- Use tabs instead of spaces for consistency.
Submitted by: rwatson [1]
Reviewed by: rwatson
MFC after: 3 weeks
would fail to attach due to unsupported USB revision. It should have
no effect when running on a real hardware.
Reviewed by: imp
Approved by: rwatson (mentor)
belonging to a devices children, in analogy to the way we handle interrupts
for SCC serial devices. This is required to counteract overly deep nesting
on onboard audio devices.
Submitted by: Marco Trillo
- Implement NP (ASCII 12, Form Feed). When used with cons25, it should
clear the screen and place the cursor at the top of the screen. When
used with xterm, it should just simulate a newline.
- When we want to use xterm emulation, make teken_demo set TERM to
xterm.
Spotted by: Paul B. Mahol <onemda@gmail.com>
driver since it couldn't have worked with NEWCARD w/o these fixes.
This should allow selecting 16-bit memory width as well (which was
what was broken).
functions used in the bootloader. The goal is to make the code more
readable and smaller (especially because we have size issues
in the loader's environment).
High level description of the changes:
+ define some string manipulation functions to improve readability;
+ create functions to manipulate module descriptors, removing some
duplicated code;
+ rename the error codes to ESOMETHING;
+ consistently use set_environment_variable (which evaluates
$variables) when interpreting variable=value assignments;
I have tested the code, but there might be code paths that I have
not traversed so please let me know of any issues.
Details of this change:
--- loader.4th ---
+ add some module operators, to remove duplicated code while parsing
module-related commands:
set-module-flag
enable-module
disable-module
toggle-module
show-module
--- pnp.4th ---
+ move here the definition related to the pnp devices list, e.g.
STAILQ_* , pnpident, pnpinfo
--- support.4th ---
+ rename error codes to capital e.g. ENOMEM EFREE ... and do obvious
changes related to the renaming;
+ remove unused structures (those relevant to pnp are moved to pnp.4th)
+ various string functions
- strlen removed (it is an internal function)
- strchr, defined as the C function
- strtype -- type a string to output
- strref -- assign a reference to the string on the stack
- unquote -- remove quotes from a string
+ remove reset_line_buffer
+ move up the 'set_environment_variable' function (which now
uses the interpreter, so $variables are evaluated).
Use the function in various places
+ add a 'test_file function' for debugging purposes
MFC after: 4 weeks
to GENERIC configuration files. This brings what's in 8.x in sync
with what is in 7.x, but does not change any current defaults.
Possibly they should now be enabled in head by default?
Because we now have cons25-style linewrapping, we must also use cons25-
style reverse linewrapping. This means that a ^H on column 0 will move
the cursor one line up.
Also fix a small regression: if the user invokes a RIS (Reset to Initial
State), we must show the cursor again.
Spotted by: Paul B. Mahol <onemda gmail com>
did not use C99-style sparse structure initialization, so remove
NULL assignments for now-removed pr_usrreq function pointers.
Reported by: Chris Ruiz <yr.retarded at gmail.com>
During boot, the domain list is locked with Giant. It is not possible to
register any protocols after the system has booted, so the lock is only
used to protect insertion of entries.
There is already a mutex in uipc_domain.c called dom_mtx. Use this mutex
to lock the list, instead of using Giant. It won't matter anything with
respect to performance, but we'll never get rid of Giant if we don't
remove from places where we don't need it.
Approved by: rwatson
MFC after: 3 weeks
o Don't check the dummy fields.
o The entry is unused if either dp_mid is 0 or dp_sid is 0.
o The start or end cylinder cannot be 0.
o The start CHS cannot be equal to the end CHS.
Submitted by: nyan
With cons25, there are printable characters below 0x1B. This is not the
case with ASCII, UTF-8, etc. but in this case we just have to.
Also don't set LC_CTYPE to UTF-8 when libteken is compiled without UTF-8
in the demo-application.
src/lib/libusb20/libusb20_desc.c
Make "libusb20_desc_foreach()" more readable.
src/sys/dev/usb2/controller/*.[ch]
src/sys/dev/usb2/core/*.[ch]
Implement support for USB power save for all HC's.
Implement support for Big-endian EHCI.
Move Huawei quirks back into "u3g" driver.
Improve device enumeration.
src/sys/dev/usb2/ethernet/*[ch]
Patches for supporting new AXE Gigabit chipset.
src/sys/dev/usb2/serial/*[ch]
Fix IOCTL return code.
src/sys/dev/usb2/wlan/*[ch]
Sync with old USB stack.
Submitted by: hps
It turns out I was looking too much at mimicing xterm, that I didn't
take the differences of cons25 into account. There are some differences
between xterm and cons25 that are important. Create a new #define called
TEKEN_CONS25 that can be toggled to switch between cons25 and xterm
mode.
- Don't forget to redraw the cursor after processing a forward/backward
tabulation.
- Implement cons25-style (WYSE?) autowrapping. This form of autowrapping
isn't that nice. It wraps the cursor when printing something on column
80. xterm wraps when printing the first character that doesn't fit.
- In cons25, a \t shouldn't overwrite previous contents, while xterm
does.
Reported by: Garrett Cooper <yanefbsd gmail com>
cells in the map, instead of using a value passed to it and then panicing if it
disagrees. This fixes interrupt map parsing for PCI bridges on some Apple
Uninorth PCI controllers.
Reported by: marcel
Tested on: G4 iBook, Sun Ultra 5
of the counter, that may happen when too many sendfile(2) calls are
being executed with this vnode [1].
To keep the size of the struct vm_page and offsets of the fields
accessed by out-of-tree modules, swap the types and locations
of the wire_count and cow fields. Add safety checks to detect cow
overflow and force fallback to the normal copy code for zero-copy
sockets. [2]
Reported by: Anton Yuzhaninov <citrin citrin ru> [1]
Suggested by: alc [2]
Reviewed by: alc
MFC after: 2 weeks
disabled entirely, which is its default state before set to a
non-zero value.
PR: 128790
Submitted by: Nick Hilliard <nick at foobar dot org>
MFC after: 3 weeks
to ip_output(). The destionation is represented in a sockaddr{} object
that may contain other pieces of information, e.g., port number. This
same destination sockaddr{} object may be passed into L2 code, which
could be used to create a L2 entry. Since there exists a L2 table per
address family, the L2 lookup function can make address family specific
comparison instead of the generic bcmp() operation over the entire
sockaddr{} structure.
Note in the IPv6 case the sin6_scope_id is not compared because the
address is currently stored in the embedded form inside the kernel.
The in6_lltable_lookup() has to account for the scope-id if this
storage format were to change in the future.
During startup some of the syscons TTY's are used to set attributes like
the screensaver and mouse options. These actions cause /dev/console to
be rendered unusable.
Fix the issue by leaving the TTY opened when it is used as the console
device.
Reported by: imp
The cursor is only inside the scrolling region when we are in origin
mode. In that case, it should use originreg instead of scrollreg. It is
completely valid to place the cursor outside the scrolling region.
the field in the mbuf constructors, since otherwise we have no way to
tell if they are valid. In the future, Kip has plans to add a flag
specifically to indicate validity, which is the preferred model.
whole KVA space using one locked 4MB dTLB entry per GB of physical
memory. On Cheetah-class machines only the dt16 can hold locked
entries though, which would be completely consumed for the kernel
TSB on machines with >= 16GB. Therefore limit the KVA space to use
no more than half of the lockable dTLB slots, given that we need
them also for other things.
- Add sanity checks which ensure that we don't exhaust the (lockable)
TLB slots.
Some time ago I started working on a library called libteken, which is
terminal emulator. It does not buffer any screen contents, but only
keeps terminal state, such as cursor position, attributes, etc. It
should implement all escape sequences that are implemented by the
cons25 terminal emulator, but also a fair amount of sequences that are
present in VT100 and xterm.
A lot of random notes, which could be of interest to users/developers:
- Even though I'm leaving the terminal type set to `cons25', users can
do experiments with placing `xterm-color' in /etc/ttys. Because we
only implement a subset of features of xterm, this may cause
artifacts. We should consider extending libteken, because in my
opinion xterm is the way to go. Some missing features:
- Keypad application mode (DECKPAM)
- Character sets (SCS)
- libteken is filled with a fair amount of assertions, but unfortunately
we cannot go into the debugger anymore if we fail them. I've done
development of this library almost entirely in userspace. In
sys/dev/syscons/teken there are two applications that can be helpful
when debugging the code:
- teken_demo: a terminal emulator that can be started from a regular
xterm that emulates a terminal using libteken. This application can
be very useful to debug any rendering issues.
- teken_stress: a stress testing application that emulates random
terminal output. libteken has literally survived multiple terabytes
of random input.
- libteken also includes support for UTF-8, but unfortunately our input
layer and font renderer don't support this. If users want to
experiment with UTF-8 support, they can enable `TEKEN_UTF8' in
teken.h. If you recompile your kernel or the teken_demo application,
you can hold some nice experiments.
- I've left PC98 the way it is right now. The PC98 platform has a custom
syscons renderer, which supports some form of localised input. Maybe
we should port PC98 to libteken by the time syscons supports UTF-8?
- I've removed the `dumb' terminal emulator. It has been broken for
years. It hasn't survived the `struct proc' -> `struct thread'
conversion.
- To prevent confusion among people that want to hack on libteken:
unlike syscons, the state machines that parse the escape sequences are
machine generated. This means that if you want to add new escape
sequences, you have to add an entry to the `sequences' file. This will
cause new entries to be added to `teken_state.h'.
- Any rendering artifacts that didn't occur prior to this commit are by
accident. They should be reported to me, so I can fix them.
Discussed on: current@, hackers@
Discussed with: philip (at 25C3)
When sysctl() is being called with a buffer that is too small, it will
return ENOMEM. Unfortunately the changes I made the other day sets the
error number to 0, because it just returns the error number of the
copyout(). Revert this part of the change.
Add support to uscanner.c for known-working devices
(the same should be done for uscanner2.c).
Waiting for 7.1 to be released before the merge.
MFC after: 3 weeks
contrib/openbsm (svn merge) and src/sys/{bsm,security/audit} (manual
merge). Add libauditd build parts and add to auditd's linkage;
force libbsm to build before libauditd.
OpenBSM history for imported revisions below for reference.
MFC after: 1 month
Sponsored by: Apple Inc.
Obtained from: TrustedBSD Project
OpenBSM 1.1 alpha 4
- With the addition of BSM error number mapping, we also need to map the
local error number passed to audit_submit(3) to a BSM error number,
rather than have the caller perform that conversion.
- Reallocate user audit events to avoid collisions with Solaris; adopt a
more formal allocation scheme, and add some events allocated in Solaris
that will be of immediate use on other platforms.
- Add an event for Calife.
- Add au_strerror(3), which allows generating strings for BSM errors
directly, rather than requiring applications to map to the local error
space, which might not be able to entirely represent the BSM error
number space.
- Major auditd rewrite for launchd(8) support. Add libauditd library
that is shared between launchd and auditd.
- Add AUDIT_TRIGGER_INITIALIZE trigger (sent via 'audit -i') for
(re)starting auditing under launchd(8) on Mac OS X.
- Add 'current' symlink to active audit trail.
- Add crash recovery of previous audit trail file when detected on audit
startup that it has not been properly terminated.
- Add the event AUE_audit_recovery to indicated when an audit trail file
has been recovered from not being properly terminated. This event is
stored in the new audit trail file and includes the path of recovered
audit trail file.
- Mac OS X and FreeBSD dependent code in auditd.c is separated into
auditd_darwin.c and auditd_fbsd.c files.
- Add an event for the posix_spawn(2) and fsgetpath(2) Mac OS X system
calls.
- For Mac OS X, we use ASL(3) instead of syslog(3) for logging.
- Add support for NOTICE level logging.
OpenBSM 1.1 alpha 3
- Add two new functions, au_bsm_to_errno() and au_errno_to_bsm(), to map
between BSM error numbers (largely the Solaris definitions) and local
errno(2) values for 32-bit and 64-bit return tokens. This is required
as operating systems don't agree on some of the values of more recent
error numbers.
- Fix a bug how au_to_exec_args(3) and au_to_exec_env(3) calculates the
total size for the token. This buge.
- Deprecated Darwin constants, such as TRAILER_PAD_MAGIC, removed.
vm_map_lookup{,_locked}() to vm_map_lookup_entry(). Having the fast path
in vm_map_lookup{,_locked}() limits its benefits to page faults. Moving
it to vm_map_lookup_entry() extends its benefits to other operations on
the vm map.
did not compared nc_dvp with supplied parent directory vnode pointer.
Add the check and note that now branches for vp != NULL and vp == NULL
are the same, thus can be merged.
Reported and reviewed by: kan
Tested by: pho
MFC after: 2 weeks
and re-enable it as default.
In particular:
+ re-enable the 'update' flag in the Makefile (of course!);
+ commit Warner's patch "orb $NOUPDATE,_FLAGS(%bp)"
to avoid writing to disk in case of a timeout/default choice;
+ fix an off-by-one count in the partition scan code that would
print the wrong name for unknown partitions;
+ unconditionally change the boot prompt to 'Boot:' instead of 'Default:'
to make room for the extra code/checks/messages. Some of the changes
listed below are also made to save space;
+ rearrange and fix comments for known partition types. Right now we
explicitly recognise *BSD, Linux, FAT16 (type 6, used on many USB keys),
NTFS (type 7), FAT32 (type 11).
Depending on other options we also recognise Extended (type 5),
FAT12 (type 1) and FAT16 < 32MB (type 4).
+ Add an entry "F6 PXE" when the code is built with -DPXE (which is
a default now). Technically, F6 boots through INT18, so the prompt 'PXE'
is a bit misleading. Unfortunately the name INT18
is too long and does not fit in - we could use ROM perhaps.
The reason I picked 'PXE' is that on many (I believe) new systems
INT18 calls PXE.
Apart from the choice of the name for PXE/ROM/INT18, this should close
pending issues on the 1-sector boot0 code and we should be able to
move the code to RELENG_7 when it reopens.
No boot0cfg changes are necessary.
MFC after: 3 weeks
It seems I forgot to remove `int error' from a single piece of code. I'm
also moving ogetkerninfo() to kern_xxx.c, because it belongs to the
class of compat system information system calls, not the generic sysctl
code.
pfs_vncache_free() that removes pvd from the list, while it is not yet
put on the list.
Prevent the invalid removal from the list by clearing pvd_next and
pvd_prev for the newly allocated pvd, and only move pfs_vncache list
head when the pvd was at the head.
Suggested and approved by: des
MFC after: 2 weeks
In the existing code we didn't really enforce that callers hold Giant
before calling userland_sysctl(), even though there is no guarantee it
is safe. Fix this by just placing Giant locks around the call to the oid
handler. This also means we only pick up Giant for a very short period
of time. Maybe we should add MPSAFE flags to sysctl or phase it out all
together.
I've also added SYSCTL_LOCK_ASSERT(). We have to make sure sysctl_root()
and name2oid() are called with the sysctl lock held.
Reviewed by: Jille Timmermans <jille quis cx>
compare map->timestamp with saved timestamp after map read lock is
reacquired, not with saved timestamp + 1. The only consequence of the +1
was unconditional lookup of the next map entry, though.
Tested by: pho
Approved by: des
MFC after: 2 weeks
may need to lock arbitrary vnodes, causing either lock order reversal or
recursive vnode lock acquisition.
Tested by: pho
Approved by: des
MFC after: 2 weeks
do pfs_vncache_alloc() for the same pfs_node and pid. In this case, we
could end up with two vnodes for the pair. Recheck the cache under the
locked pfs_vncache_mutex after all sleeping operations are done [1].
This case mostly cannot happen now because pseudofs uses exclusive vnode
locking for lookup. But it does drop the vnode lock for dotdot lookups,
and Marcus' pseudofs_vptocnp implementation is vulnerable too.
Do not call free() on the struct pfs_vdata after insmntque() failure,
because vp->v_data points to the structure, and pseudofs_reclaim()
frees it by the call to pfs_vncache_free().
Tested by: pho [1]
Approved by: des
MFC after: 2 weeks
Log:
- merge in latest xenbus from dfr's xenhvm
- fix race condition in xs_read_reply by converting tsleep to mtx_sleep
Log:
unmask evtchn in bind_{virq, ipi}_to_irq
Log:
- remove code for handling case of not being able to sleep
- eliminate tsleep - make sleeps atomic
changes since the last imported OpenBSM release:
OpenBSM 1.1 alpha 4
- With the addition of BSM error number mapping, we also need to map the
local error number passed to audit_submit(3) to a BSM error number,
rather than have the caller perform that conversion.
- Reallocate user audit events to avoid collisions with Solaris; adopt a
more formal allocation scheme, and add some events allocated in Solaris
that will be of immediate use on other platforms.
- Add an event for Calife.
- Add au_strerror(3), which allows generating strings for BSM errors
directly, rather than requiring applications to map to the local error
space, which might not be able to entirely represent the BSM error
number space.
- Major auditd rewrite for launchd(8) support. Add libauditd library
that is shared between launchd and auditd.
- Add AUDIT_TRIGGER_INITIALIZE trigger (sent via 'audit -i') for
(re)starting auditing under launchd(8) on Mac OS X.
- Add 'current' symlink to active audit trail.
- Add crash recovery of previous audit trail file when detected on audit
startup that it has not been properly terminated.
- Add the event AUE_audit_recovery to indicated when an audit trail file
has been recovered from not being properly terminated. This event is
stored in the new audit trail file and includes the path of recovered
audit trail file.
- Mac OS X and FreeBSD dependent code in auditd.c is separated into
auditd_darwin.c and auditd_fbsd.c files.
- Add an event for the posix_spawn(2) and fsgetpath(2) Mac OS X system
calls.
- For Mac OS X, we use ASL(3) instead of syslog(3) for logging.
- Add support for NOTICE level logging.
OpenBSM 1.1 alpha 3
- Add two new functions, au_bsm_to_errno() and au_errno_to_bsm(), to map
between BSM error numbers (largely the Solaris definitions) and local
errno(2) values for 32-bit and 64-bit return tokens. This is required
as operating systems don't agree on some of the values of more recent
error numbers.
- Fix a bug how au_to_exec_args(3) and au_to_exec_env(3) calculates the
total size for the token. This bug resulted in "unknown" tokens being
printed after the exec args/env tokens.
- Support for AUT_SOCKET_EX extended socket tokens, which describe a
socket using a pair of IPv4/IPv6 and port tuples.
- OpenBSM BSM file header version bumped for 1.1 release.
- Deprecated Darwin constants, such as TRAILER_PAD_MAGIC, removed.
Obtained from: TrustedBSD Project
Sponsored by: Apple Inc.
options. Using the already included std.avila is not considered
to be entirely right (and the options slightly differ) but the best
match we currently have. Upcoming work should fit better.
Reorder another variable to match the layout of other configs.
Reviewed by: sam, warner (earlier version with options removed)
variable name for the inpcb.
For consistency with the other *_hdrsiz functions use 'size'
instead of 'siz' as variable name.
No functional change.
MFC after: 4 weeks
- Always use round brackets with return ().
- Add empty line to beginning of functions without local variables.
- Comments start with a capital letter and end in a '.'.
While there adapt a few comments.
Reviewed by: rwatson
MFC after: 4 weeks
arrays under #ifndef XEN to make XEN config compile again.
In case of Xen vm_guest is hard coded.
Move the list for the vm_guest sysctl out of the restictive
bounds as the sysctl is there in either case.
Note, that the patch provided with this card for the Linux states that
the card uses DEFAULT_RCLK * 2, while in fact it is '* 10'. So probably
we should also use the subdevice/subvendord here. For now just ignore
that fact.
PR: kern/129665
Submitted by: bsam
Obtained from: united efforst with bsam
plex. If the plex is a raid5 plex, and is being written to, parity data might
have to be read from the underlying disks, requiring them to be opened for
reading as well as writing.
MFC after: 1 week
Now the NDISulator supports NDIS USB drivers that it've tested with
devices as follows:
- Anygate XM-142 (Conexant)
- Netgear WG111v2 (Realtek)
- U-Khan UW-2054u (Marvell)
- Shuttle XPC Accessory PN20 (Realtek)
- ipTIME G054U2 (Ralink)
- UNiCORN WL-54G (ZyDAS)
- ZyXEL G-200v2 (ZyDAS)
All of them succeeded to attach and worked though there are still some
problems that it's expected to be solved.
To use NDIS USB support, you should rebuild and install ndiscvt(8) and
if you encounter a problem to attach please set `hw.ndisusb.halt' to
0 then retry.
I expect no changes of the NDIS code for PCI, PCMCIA devices.
Obtained from: //depot/projects/ndisusb/...
Disable some unneeded pathes in overcomplicated input mixer to help parser
to handle the rest better. This gives mic input boost control in some
configurations and just more predictable operation in others.
1. The "route" command allows route insertion through the interface-direct
option "-iface". During if_attach(), an sockaddr_dl{} entry is created
for the interface and is part of the interface address list. This
sockaddr_dl{} entry describes the interface in detail. The "route"
command selects this entry as the "gateway" object when the "-iface"
option is present. The "arp" and "ndp" commands also interact with the
kernel through the routing socket when adding and removing static L2
entries. The static L2 information is also provided through the
"gateway" object with an AF_LINK family type, similar to what is
provided by the "route" command. In order to differentiate between
these two types of operations, a RTF_LLDATA flag is introduced. This
flag is set by the "arp" and "ndp" commands when issuing the add and
delete commands. This flag is also set in each L2 entry returned by the
kernel. The "arp" and "ndp" command follows a convention where a RTM_GET
is issued first followed by a RTM_ADD/DELETE. This RTM_GET request fills
in the fields for a "rtm" object, which is reinjected into the kernel by
a subsequent RTM_ADD/DELETE command. The entry returend from RTM_GET
is a prefix route, so the RTF_LLDATA flag must be specified when issuing
the RTM_ADD/DELETE messages.
2. Enforce the convention that NET_RT_FLAGS with a 0 w_arg is the
specification for retrieving L2 information. Also optimized the
code logic.
Reviewed by: julian
the following operations, e.g.:
1) ifconfig tun0 create
2) ifconfig tun0 10.1.1.1 10.1.1.2
3) route add -net 192.103.54.0/24 -iface tun0
4) ifconfig tun0 destroy
If cv wait on the TUN_CLOSED flag, then the last operation (4) will
block forever.
Revert the previous changes and fix the mtx_unlock() leak.
invariants and approach for protocol switch methods in protsw_init(),
and also some KASSERT's for non-domain init entries in protocol
switch tables: pru_abort and pru_send must both be implemented.
For now, leave those assertions #if 0'd, since there are a few
protocols that violate them in non-harmful ways. Whether or not we
should enforce pru_abort being implemented for non-stream protocols
is an interesting question: currently abort is only invoked on stream
sockets in situations where un-accepted sockets must be abruptly
closed (i.e., close() on a listen socket with pending connections),
but in principle it is useful for datagram sockets and most datagram
socket types implement it.
MFC after: 3 weeks
by adding a separate TUN_CLOSED flag that is set after tunclose is done referencing it.
- drop the tun_mtx after the flag check to avoid holding it across if_detach which can recurse in to
if_tun.c
FPA floating-point format is identical to the VFP format,
but is always stored in big-endian.
Introduce _IEEE_WORD_ORDER to describe the byte-order of
the FP representation.
Obtained from: Juniper Networks, Inc
looked up would have v_dd set to a non-NULL value. This fixes a panic
seen when running installworld on a diskless system with a separate /usr
file system.
Submitted by: cracauer
Approved by: kib
Note that you need at least xf86-video-intel 2.4.3 for this to work.
The G4X doesn't put the GATT into the same area of stolen memory
as all the other chips and older versions of the driver didn't
handle that properly.
Tested by: ganbold
Approved by: kib
MFC after: 2 weeks
Note that there is no working backend (or at least
that is mentioned in the PR ticket) but the device
is now supported on our end.
PR: 117205
Submitted by: Artem Naluzhnyy <tut at nhamon dot com dot ua>
MFC after: 1 week
o check feature bits when probing NPE ethernet support
o move firmware loading logic from if_npe to core npe support
o allow multiple refs to core NPE driver
o while here fix hw.npe.debug tunable path
o add definitions for more bits, for masking out IXP465-specific bits,
and %b format string
o add ixp4xx_read_feature_bits to retrieve the mask of valid features
(aka fuse bits)
o add cpu_is_ixp42x() macro
o print feature bits at boot
o add EHCI_SCFLG_BIGEMMIO flag to force big-endian byte-select to be
set in USBMODE
o split reset work into new public routine ehci_reset so bus shim drivers
can force big-endian byte-select before ehci_init
long commands into multiple requests. [08:12]
Avoid calling uninitialized function pointers in protocol switch
code. [08:13]
Merry Christmas everybody...
Approved by: so (cperciva)
Approved by: re (kensmith)
Security: FreeBSD-SA-08:12.ftpd, FreeBSD-SA-08:13.protosw
mac_proc_vm_revoke_recurse() requests a read lock on the vm map at the start
but does not handle failure by vm_map_lock_upgrade() when it seeks to modify
the vm map. At present, this works because all lock request on a vm map are
implemented as exclusive locks. Thus, vm_map_lock_upgrade() is a no-op that
always reports success. However, that is about to change, and
proc_vm_revoke_recurse() will require substantial modifications to handle
vm_map_lock_upgrade() failures. For the time being, I am changing
mac_proc_vm_revoke_recurse() to request a write lock on the vm map at the
start.
Approved by: rwatson
MFC after: 3 months
firmware versions which wedge when using the OFW test service,
so given that we don't really depend on SUNW,stop-self just nuke
it altogether instead of risking problems.
- At least Fire V880 have a small hardware glitch which causes the
reception of IDR_NACKs for CPUs we actually haven't tried to send
an IPI to, even not as part of the initial try. According to tests
this apparently can be safely ignored though, so just return if
checking for the individual IDR_NACKs indicates no outstanding
dispatch. Serializing the sending of IPIs between MD and MI code
by the combined usage of smp_ipi_mtx makes no difference to this
phenomenon. [1]
- Provide relevant debugging bits already with the initial panic
in case of problems with the IPI dispatch, which would have
allowed to diagnose the above problem without a specially built
kernel.
- In case of cheetah_ipi_selected() base the delay we wait for
other CPUs which also might want to dispatch IPIs on the total
amount of CPUs instead of just the number of CPUs we let this
CPU send IPIs to because in the worst case all CPUs also want
to IPI us at the same time.
Reported and access for extensive tests provided by: Beat Gaetzi [1]
destroy operation until the referenced clone device has
been closed by the process properly. The behavior is now
consistently with the previous release.
Reviewed by: Kip Macy
event from mii(4) may not be delivered if valid link was already
established. To address the issue, check current link state after
driving MII_TICK. This should fix a regression introduced in
r184245.
PR: kern/129647
event from mii(4) may not be delivered if valid link was already
established. To address the issue, check current link state after
driving MII_TICK. This should fix a regression introduced in
r185753 on fast ethernet controllers.
Reported by: csjp, Bruce Cran < bruce <> cran DOT org DOT uk >
Tested by: csjp, Bruce Cran (initial version)
In r185891 I removed the newlines from messages written to /dev/console,
because it made startup messages from rc-scripts harder to read. This,
unfortunately, causes the kernel message that is printed after a
non-terminated log message to be concatenated.
This could be fixed, but on short term it's better to just revert the
change.
Reported by: Jaakko Heinonen <jh saunalahti fi>
Inside ptsdrv_{in,out}wakeup() we call KNOTE_LOCKED() to wake up any
kevent(2) users. Because the kqueue handlers are executed synchronously,
we must set PTS_FINISHED before calling ptsdrv_{in,out}wakeup().
Discovered by: nork
Right now the wchan strings "ttyinp" and "ttybgw" only differ one
character from the strings we used prior to MPSAFE TTY. Just rename them
back to their pre-MPSAFE TTY counterparts.
Also rename "ttylck" to "ttymtx", which should make it more clear that a
process is blocked on the TTY mutex, not some other form of locking.
o add support for IXP435 cpu's (e.g. 64 irq's)
o add support for Cambria-specific devices: npe, led's (front panel and
octal latch), ehci, mcu, ide cf
o redo memory mapping for xscale/ixp4xx boards: previously memory
was assumed aliased to 0x10000000 but this appears to be true only
for ixp425 systems and breaks operation on others; rework so memory
is assumed to start at 0
o rework NPE configuration support to use NPE id's instead of port #'s;
these changes also rename the associated MAC's to follow the NPE's
they are attached to
o update npe firmware to latest rev (same license) and update default fw
imageid's to match; in particular this adds NPE-A and crypto support
o re-style NPE fw handling code and add a console msg identifying the
attributes of the loaded fw
o fix numerous problems with handling failures during npe setup
o fix npe rx q setup; need to spin waiting for mailbox responses during
early boot stages as qmgr interrupts are not delivered; this fixes
the problem where all 8 traffic classifications were not tied to the
rx q (and eliminates the console msg "remember to fix rx q setup")
o add DELAY to npe MII wait logic for IXP435
o strip down builtin phys->virt address translation table in resource
handling to just those resources that require it and add a console msg
to alert people when this (kludge) table needs to be extended
o purge a bunch of dead netbsd-ism's
o cleanup avila led driver
o add Cambria support to boot2 and rework code for better multi-board support
Notes:
1. NPE-A doesn't work and causes NPE-C to stop working; it is disabled
in the hints
2. USB isn't working yet; controller communicates ok but device
discovery fails
3. Cambria support must be configured separately from IXP425 boards;
multi-board support is TBD
Sponsored by: Hobnob, Gateworks (board donation)
Reviewed by: imp
o add support to byte swap EHCI descriptor contents; the IXP435
has dual-EHCI controllers integral but descriptor contents are
in big-endian format; this support is configured with the
USB_EHCI_BIG_ENDIAN_DESC option and enabled with EHCI_SCFLG_BIGEDESC
o clean up EHCI USBMODE register setup during init; add #defines for
bit values
o split debug support out into a new file and enable use through ddb
o while here remove a bunch of lingering netbsd-isms
Reviewed by: imp
of OFW access semantics, in order to allow future support for real-mode
OF access and flattened device frees. OF client interface modules are
implemented using KOBJ, in a similar way to the PPC PMAP modules.
Because we need Open Firmware to be available before mutexes can be used on
sparc64, changes are also included to allow KOBJ to be used very early in
the boot process by only using the mutex once we know it has been initialized.
Reviewed by: marius, grehan
This commit is slightly different from the original patch in the PR:
1. EM_ALPHA keeps the old value for compatibility reason.
2. Non-standard SHT_NUM is not added.
3. Style.
PR: kern/118540
Submitted by: "Pedro F. Giffuni" <giffunip[at]tutopia.com>
Intel 855 chips present the same pci id for both heads. This prevents
us from attaching to the dummy second head. All other chips that I
am aware of either only present a single pci id, or different ids
for each head so that we only match on the correct head.
Approved by: kib@
MFC after: 2 weeks
storage class. This check was lost. It is not important for the most cases,
but as it was reported on current@, it does important for sis driver and
surely inportant for AHCI driver. So restore it there.
Submitted by: Toshikazu ICHINOSEKI, Andrey V. Elsukov
Discussed on: current@
ati pci gart to use bus_dma to handle the allocations. This fixes
a garbled screen issue on at least some radeons (X1400 tested). It is
also likely that this is the correct fix for PR# 119324, though that
is not confirmed yet.
Reviewed by: jhb@ (mentor, prior version)
Approved by: kib@
MFC after: 2 weeks
be fatal so just inform about this instead of panicing.
- Ensure we use the right softc in case the interrupt of a child is
is routed to the companion PBM instead. This hasn't been seen in the
wild so far but given that it's the case for the Schizo interrupts,
handling this situation also for child interrupts as a precaution
seemed a good idea.
- Deal with broken firmware versions which miss child entries in the
ino-bitmap as seen on V880 by belatedly registering as interrupt
controller in schizo_setup_intr(). [1]
- Add missing '\n' when printing the warning regarding Schizo Errata
I-13.
Reported and tested by: Beat Gaetzi [1]
- Make LBC resources management self-contained: introduce explicit LBC
resources definition (much like the OCP), provide dedicated rman for LB mem
space.
- Full configuration of an LB chip select device: program LAW and BR/OR, map
into KVA, handle all LB attributes (bus width, machine select, ecc,
write protect etc).
- Factor out LAW manipulation routines into shared code, adjust OCP area
accordingly.
- Other LBC fixes and clean-ups.
Obtained from: Semihalf
NULL pointer to struct mount if the looked up vnode is reclaimed. Also,
these syscalls only mnt_ref() the mp, still allowing it to be unmounted;
only struct mount memory is kept from being reused.
Lock the vnode when doing name lookup, then reference its mount point,
unlock the vnode and vfs_busy the mountpoint. This sequence shall take
care of both races.
Reported and tested by: pho
Discussed with: attilio
MFC after: 1 month
payload length in TSO case. Leaving unused TBD also seem to cause
SCB timeouts under certain conditions when TSO/non-TSO traffics
are active at the same time.
Add code to the Chelsio driver so that it can recognize different
module types which may be plugged into it, including SR, LR lasers
and TWINAX copper cables.
Obtained from: Chelsio Inc.
MFC after: 1 week
it running under a virtual environment. This also introduces a globally
accessible variable vm_guest that can be used where appropriate in the
kernel to inspect this environment.
To make it easier for the long run, an enum VM_GUEST is also introduced,
which could possibly be factored out in a header somewhere (but the
question is where - vm/vm_param.h? sys/param.h?) so it eventually becomes
a part of the standard KPI. In any case, it's a start.
The purpose of all this isn't to absolutely detect that the OS is running
under a virtual environment (cf. "redpill") but to allow the parts of the
kernel and the userland that care about this particular aspect and can do
something useful depending on it to have a standardised interface. Reducing
kern.hz is one example but there are other things that could be done like
avoiding context switches, not using CPU instructions that are known to be
slow in emulation, possibly different strategies in VM (memory) allocation,
CPU scheduling, etc.
It isn't clear if the JAILS/VIMAGE functionality should also be exposed
by this particular mechanism (probably not since they're not "full"
virtual hardware environments). Sometime in the future another sysctl and
a variable could be introduced to reflect if the kernel supports any kind
of virtual hosting (e.g. VMWare VMI, Xen dom0).
Reviewed by: silence from src-commiters@, virtualization@, kmacy@
Approved by: gnn (mentor)
Security: Obscurity doesn't help.
- split bootstrap code into more modular routines, which will also be used for
the non-booting cores
- clean up registers usage
- improve comments to better reflect reality
- eliminate dead or redundant code
- other minor fixes
This refactoring is a preliminary step before importing dual-core (MPC8572)
support.
Obtained from: Freescale, Semihalf
had been the only flag with random usage patterns.
Switch inc_flags to be used as a real bit field by using
INC_ISIPV6 with bitops to check for the 'isipv6' condition.
While here fix a place or two where in case of v4 inc_flags
were not properly initialized before.[1]
Found by: rwatson during review [1]
Discussed with: rwatson
Reviewed by: rwatson
MFC after: 4 weeks
command whenever Tx completion interrupt is raised. The Tx poll
bit is cleared when all packets waiting to be transferred have been
processed. This means the second Tx poll command can be silently
ignored as the Tx poll bit could be still active while processing
of previous Tx poll command is in progress.
To address the issue re(4) used to invoke the Tx poll command in Tx
completion handler whenever it detects there are pending packets in
TxQ. However that still does not seem to completely eliminate
watchdog timeouts seen on RealTek PCIe controllers. To fix the
issue kick Tx poll command only after Tx completion interrupt is
raised as this would indicate Tx is now idle state such that it can
accept new Tx poll command again. While here apply this workaround
for PCIe based controllers as other controllers does not seem to
have this limitation.
Tested by: Victor Balada Diaz < victor <> bsdes DOT net >
out of sleep mode prior to accessing to PHY. This should fix device
attach failure seen on these controllers. Also enable the sleep
mode when device is put into sleep state.
PR: kern/123123, kern/123053
* Remove trailing whitespace (added in r186162)
* Reduce indentation by rephrasing test
Submitted by: Christopher Mallon (christoph dot mallon at gmx dot de)
- threadA runs vfs_rel(mp1)
- threadB does unmount the mp1 fs, sets MNTK_UNMOUNT and drop MNT_ILOCK()
- threadA runs vfs_busy(mp1) and, as long as, MNTK_UNMOUNT is set, sleeps
waiting for threadB to complete the unmount
- threadB, in vfs_mount_destroy(), finds mnt_lock > 0 and sleeps waiting
for the refcount to expire.
Fix the deadlock by adding a flag called MNTK_REFEXPIRE which signals the
unmounter is waiting for mnt_ref to expire.
The vfs_busy contenders got awake, fails, and if they retry the
MNTK_REFEXPIRE won't allow them to sleep again.
2) Simplify significantly the code of vfs_mount_destroy() trimming
unnecessary codes:
- as long as any reference exited, it is no-more possible to have
write-op (primarty and secondary) in progress.
- it is no needed to drop and reacquire the mount lock.
- filling the structures with dummy values is unuseful as long as
it is going to be freed.
Tested by: pho, Andrea Barberio <insomniac at slackware dot it>
Discussed with: kib
anything other than 0. Make it so. This fixes
"panic: VOP_STRATEGY failed bp=0xc320dd90 vp=0xc3b9f648",
encountered when writing to an orphaned filesystem. Reason
for the panic was the following assert:
KASSERT(i == 0, ("VOP_STRATEGY failed bp=%p vp=%p", bp, bp->b_vp));
at vfs_bio:bufstrategy().
Reviewed by: scottl, phk
Approved by: rwatson (mentor)
Sponsored by: FreeBSD Foundation
result in panic:
mdconfig -af blah.img -o force
mount /dev/md0 /mnt
mdconfig -du 0
Reviewed by: scottl
Approved by: rwatson (mentor)
Sponsored by: FreeBSD Foundation
o Add support for compiling elf64 for this file (the rest of the changes are
coming later)
o Fill in some misssing relocation types. We need to support these in
elf_machdep.c's relocation routines eventually, but that's future work
too.
the device, which means refcount on periph drivers never drops,
which means cam_sim_free() never returns, which results in umass
sleeping there ad infinitum.
Submitted by: pjd
Reviewed by: scottl, pjd
Approved by: rwatson (mentor)
Sponsored by: FreeBSD Foundation
unregistration, and execution:
- Add some brackets for clarity and trim a bit of vertical whitespace.
- Remove comments that may not contribute to clarity, such as "Lock"
before acquiring a lock and "Get memory" before allocating memory.
- During hook registration, don't drop pfil_list_lock between checking
for a duplicate and registering the hook, as this leaves a race
condition by failing to enforce the "no duplicate hooks" invariant.
- Don't lock the hook during registration, since it's not yet in use.
- Document assumption that hooks will be quiesced before being
unregistered.
- Don't write-lock hooks during removal because they are assumed
quiesced.
- Rename "done" label to "locked_error" to be clear that it's an error
path on the way out of hook execution.
MFC after: pretty soon
does - in DragonFly, it's cam_sim_release() what actually frees the
SIM; cam_sim_free does nothing more than calling cam_sim_release().
Here, we drain in cam_sim_free, waiting for refcount to drop to zero.
We cannot do the same think DragonFly does, because after cam_sim_free
returns, client would destroy the sim->mtx, and CAM would trip over
an initialized mutex.
Reviewed by: scottl
Approved by: rwatson (mentor)
Sponsored by: FreeBSD Foundation
to actually use it would panic on mtx operation, as dead_sim doesn't
have a proper mutex. Even if it had a properly initialized mutex,
it wouldn't have properly locked and owned one.
Reviewed by: scottl
Approved by: rwatson (mentor)
Sponsored by: FreeBSD Foundation
configuration registers (which are not going to change) on every interrupt
looks expensive, especially when interrupt is shared. Profiling shows me 3%
of time spent by atapci0 on pure network load due to IRQ sharing with em0.
separate index variable.
It gives more then double rc4_init() performance increase on tested i386 P4.
It also gives about 15% speedup to PPTP VPN with stateless MPPE encryption
(by ng_mppc) which calls rc4_init() for every packet.
- Initialize variables before use.
- Remove a KASSERT() that could falsely trigger if there are other sources
of NMIs in the system.
Efficiency tweak:
- When checking PMCs that overflowed, ignore PMCs that were not configured for
sampling.
a real packet error but simply indicate that an unexpected unicast or multicast
error was received by the NIC, which was not counted in the past as well.
Reported by: many (on -stable@)
Reviewed by: davidch
MFC after: 3 days
On HyperThreading CPUs logical cores have same frequency, so setting it
on any core will change the other's one. In most cases first request
to the second core will be the "set" request, done after setting frequency
of the first core. In such case second CPU will obtain throttled frequency
of the first core as it's max_mhz making cpufreq broken due to different
frequency sets.
(e.g. ath): we must check the key index and not whether the key
points at a cipher other than "undef". This looks like it's been
broken for a while. Might be worth adding an explicit clear cipher
at some point though this would require changes to the usage of
IEEE80211_KEY_UNDEFINED.
PR: 125906
same LOM hardware with goofed-up EEPROM programming also needed reading the
Ethernet address from the chips registers as the EEPROM did not have a
sensible address programmed.
Patch developed by: pyun@
Funky hardware on loan: www.id-it.nl
MFC after: 2 weeks
the inpcb names rather than the following IPv6 compat macros:
in6pcb,in6p_sp, in6p_ip6_nxt,in6p_flowinfo,in6p_vflag,
in6p_flags,in6p_socket,in6p_lport,in6p_fport,in6p_ppcb and
sotoin6pcb().
Apart from removing duplicate code in netipsec, this is a pure
whitespace, not a functional change.
Discussed with: rwatson
Reviewed by: rwatson (version before review requested changes)
MFC after: 4 weeks (set the timer and see then)
controllers. Reading this register, for which there are indications
that it doesn't really exist, returns 0 on at least some 12160
and doing so on Sun Fire V880 causes a data access error exception.
Reported and tested by: Beat Gaetzi
Approved by: mjacob
Obtained from: OpenBSD (modulo setting isp_lvdmode)
the code for parsing interrupt maps) to PowerPC and reflect their new MI
status by moving them to the shared dev/ofw directory.
This commit also modifies the OFW PCI enumeration procedure on PowerPC to
allow the bus to find non-firmware-enumerated devices that Apple likes to add,
and adds some useful Open Firmware properties (compat and name) to the pnpinfo
string of children on OFW SBus, EBus, PCI, and MacIO links. Because of the
change to PCI enumeration on PowerPC, X has started working again on PPC
machines with Grackle hostbridges.
Reviewed by: marius
Obtained from: sparc64
1. separating L2 tables (ARP, NDP) from the L3 routing tables
2. removing as much locking dependencies among these layers as
possible to allow for some parallelism in the search operations
3. simplify the logic in the routing code,
The most notable end result is the obsolescent of the route
cloning (RTF_CLONING) concept, which translated into code reduction
in both IPv4 ARP and IPv6 NDP related modules, and size reduction in
struct rtentry{}. The change in design obsoletes the semantics of
RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland
applications such as "arp" and "ndp" have been modified to reflect
those changes. The output from "netstat -r" shows only the routing
entries.
Quite a few developers have contributed to this project in the
past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and
Andre Oppermann. And most recently:
- Kip Macy revised the locking code completely, thus completing
the last piece of the puzzle, Kip has also been conducting
active functional testing
- Sam Leffler has helped me improving/refactoring the code, and
provided valuable reviews
- Julian Elischer setup the perforce tree for me and has helped
me maintaining that branch before the svn conversion
really was meant to be 256. Adjust usage accordingly and replace
bogus usage of this value in checking IEEE channel #'s.
NB: this causes an ABI change; ifconfig must be recompiled
indicates if an association id is required before outbound traffic
is permitted. This cleans up the previous change that broke mcast
traffic "to the stack" in ap mode as a side effect.
Reviewed by: sephe, thompsa, weongyo
src into the tree. The old split was balanced on module dependencies
and symbol exposure that no longer exists. Users that want a module
setup with rate control algorithm other than sample must override
ATH_RATE in the ath module Makefile.
Reviewed by: imp
to keep for 7-STABLE when MFCing in_pcbladdr() to not change the
behaviour there.
With this a destination route via a loopback interface is treated as
a valid and reachable thing for IPv4 source address selection, even
though nothing of that network is ever directly reachable, but it is
more like a blackhole route.
With this the source address will be selected and IPsec can grab the
packets before we would discard them at a later point, encapsulate them
and send them out from a different tunnel endpoint IP.
Discussed on: net
Reported by: Frank Behrens <frank@harz.behrens.de>
Tested by: Frank Behrens <frank@harz.behrens.de>
MFC after: 4 weeks (just so that I get the mail)
Remove ng_rmnode_flags() function.
ng_rmnode_self() was made to be called only while having node locked.
When node is properly locked, any function call sent to it will always be
queued. So turning ng_rmnode_self() into the ng_rmnode_flags() is not just
meaningless, but incorrent, as it violates node locking when called outside.
No objections: julian, thompsa
variable in this copy of the code[1].
While here prefix the variables with 'pf_' to avoid file static global
variables with colliding names that are or will be virtualized.
Discussed with: rwatson, silby [1]
by redoing the Open Firmware card initialization calls in ofwfb_set_mode(). This
uses the same trick (setting V_ADP_MODECHANGE) to arrange this as machfb(4) and
creatorfb(4).
but formerly missed under VIMAGE_GLOBAL.
Put the extern declarations of the virtualized globals
under VIMAGE_GLOBAL as the globals themsevles are already.
This will help by the time when we are going to remove the globals
entirely.
Sponsored by: The FreeBSD Foundation
time it is marked for user space callchain capture in the NMI
handler and the time the callchain capture callback runs.
- Improve code and control flow clarity by invoking hwpmc(4)'s user
space callchain capture callback directly from low-level code.
Reviewed by: jhb (kern/subr_trap.c)
Testing (various patch revisions): gnn,
Fabien Thomas <fabien dot thomas at netasq dot com>,
Artem Belevich <artemb at gmail dot com>
if (batt_sleep_ms)
AcpiOsSleep(1);
where the rest are all:
if (batt_sleep_ms)
AcpiOsSleep(batt_sleep_ms);
I can't recall why that one was different, so change it
to match the rest.
Pointed out by: Christoph Mallon
MFC after: 2 weeks
All ioctl()'s that aren't implemented by pts(4) are forwarded to the TTY
itself. Unfortunately this is not correct for FIONREAD, because it will
give the wrong amount of bytes that are available to read.
Tested by: keramida
Reminded by: keramida
On some laptops with smart batteries, enabling battery monitoring
software causes keystrokes from atkbd to be lost. This has also been
reported on Linux, and is apparently due to the keyboard and I2C line
for the battery being routed through the same chip. Whether that's
accurate or not, adding extra sleeps to the status checking code
causes the problem to go away.
I've been running this for nearly six months now on my laptop,
it works like a charm.
Reviewed by: Nate Lawson (in a previous revision)
MFC after: 2 weeks
o recognize ixp435 cpu
o change memory layout for for ixp4xx to not assume memory is aliases
to 0x10000000 (Cambria/ixp435 memory starts at zero)
o handle 64 irqs for ixp435
o dual EHCI USB 2.0 controller integral to ixp435
o overhaul NPE code for ixp435 and better MAC+MII naming
o updated NPE firmware (including NPE-A image for ixp435/ixp465)
o Gateworks Cambria board support:
- IDE compact flash
- MCU
- front panel LED on i2c bus
- Octal LED latch
Sanity-tested with NFS-root on Avila and Cambria boards. Requires
pending boot2 mods for CF-boot on Cambria.
error is not EAGAIN. Several sysctls that inspect another process use
p_candebug() for checking access right for the curproc. p_candebug()
returns EAGAIN for some reasons, in particular, for the process doing
exec() now. If execing process tries to lock Giant, we get a livelock,
because sysctl handlers are covered by Giant, and often do not sleep.
Break the livelock by dropping Giant and allowing other threads to
execute in the EAGAIN loop.
Also, do not return EAGAIN from p_candebug() when process is executing,
use more appropriate EBUSY error [1].
Reported and tested by: pho
Suggested by: rwatson [1]
Reviewed by: rwatson, des
MFC after: 1 week
state changes. This change modifies tunopen and tunclose to call the
if_link_state_change() function. Among other things, this will result in
devd(8) receiving events from devctl(4) for linkup/link down. This allows
us to do several useful things, including initializing tunnel parameters
and adding routes.
Discussed on: freebsd-net@
MFC after: 2 weeks
on a best-effort basis. Teach vn_fullpath to use this new VOP if a
regular VFS cache lookup fails. This VOP is designed to supplement the
VFS cache to provide a better chance that a vnode-to-name lookup will
succeed.
Currently, an implementation for devfs is being committed. The default
implementation is to return ENOENT.
A big thanks to kib for the mentorship on this, and to pho for running it
through his stress test suite.
Reviewed by: arch
Approved by: kib
One thing I didn't expect many applications to use, was kqueue() on
pseudo-terminal master devices. There are applications that use kqueue()
on the TTY itself (rtorrent, etc). That doesn't mean we shouldn't
implement this. Libraries like libevent use kqueue() by default, which
means they wouldn't be able to use kqueue().
The old TTY layer implements a very broken version of kqueue() by
performing the actual polling on the TTY device.
Discussed with: peter
When I added RLIMIT_NPTS, I forgot to add it to rlimit_ident[]. Make
sure the rlimit_ident[] array is always RLIM_NLIMITS elements big. So if
we ever forget to add new rlimits to this list again. it will contain a
null pointer, instead of random data.
Spotted by: rwatson
missed under VIMAGE_GLOBAL.
Start putting the extern declarations of the virtualized globals
under VIMAGE_GLOBAL as the globals themsevles are already.
This will help by the time when we are going to remove the globals
entirely.
While there garbage collect a few dead externs from ip6_var.h.
Sponsored by: The FreeBSD Foundation
o Try to be smarter about reading the ExCA CSC register. Now, we only
do it for 16-bit cards. Add some experimental code to treat it like
a power interrupt, but I'm not 100% sure that I like it. It may be
removed upon further testing. It seemed to help in one test case, but
the evidence may be inconclusive. This may be beneficial for cleaning up
exca_reset and exca_wait_ready.
o Check for CSTS events on the socket event register. We ask for it when
we're powering up a card, but I don't think we're otherwise using
it. Just ACK the interrupt for now. In theory, we can use it
instead of the busy wait we do in cbb_cardbus_reset. More research
is necessary to see if we can optimize things there when we're
waiting for the DEVVENDOR register to become valid.
o Rework the comments a bit. Minor tidying up. Etc.
outside the prison_states array.
When checking if there is a name configured for the prison, check the
first character to not be '\0' instead of checking if the char array
is present, which it always is. Note, that this is different for the
*jailname in the syscall.
Found with: Coverity Prevent(tm)
CID: 4156, 4155
MFC after: 4 weeks (just that I get the mail)
jhb probably forgot to commit this file with r185878 and will want to
review this. It unbreaks the build here.
Obtained from: p4 //depot/user/jhb/lock/compat/freebsd32/freebsd32_signal.h#2
container structures, depending on VIMAGE_GLOBALS compile time option.
Make VIMAGE_GLOBALS a new compile-time option, which by default will not
be defined, resulting in instatiations of global variables selected for
V_irtualization (enclosed in #ifdef VIMAGE_GLOBALS blocks) to be
effectively compiled out. Instantiate new global container structures
to hold V_irtualized variables: vnet_net_0, vnet_inet_0, vnet_inet6_0,
vnet_ipsec_0, vnet_netgraph_0, and vnet_gif_0.
Update the VSYM() macro so that depending on VIMAGE_GLOBALS the V_
macros resolve either to the original globals, or to fields inside
container structures, i.e. effectively
#ifdef VIMAGE_GLOBALS
#define V_rt_tables rt_tables
#else
#define V_rt_tables vnet_net_0._rt_tables
#endif
Update SYSCTL_V_*() macros to operate either on globals or on fields
inside container structs.
Extend the internal kldsym() lookups with the ability to resolve
selected fields inside the virtualization container structs. This
applies only to the fields which are explicitly registered for kldsym()
visibility via VNET_MOD_DECLARE() and vnet_mod_register(), currently
this is done only in sys/net/if.c.
Fix a few broken instances of MODULE_GLOBAL() macro use in SCTP code,
and modify the MODULE_GLOBAL() macro to resolve to V_ macros, which in
turn result in proper code being generated depending on VIMAGE_GLOBALS.
De-virtualize local static variables in sys/contrib/pf/net/pf_subr.c
which were prematurely V_irtualized by automated V_ prepending scripts
during earlier merging steps. PF virtualization will be done
separately, most probably after next PF import.
Convert a few variable initializations at instantiation to
initialization in init functions, most notably in ipfw. Also convert
TUNABLE_INT() initializers for V_ variables to TUNABLE_FETCH_INT() in
initializer functions.
Discussed at: devsummit Strassburg
Reviewed by: bz, julian
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
by running the tunable_mbinit() SYSINIT at SI_ORDER_MIDDLE
before the init_maxsockets() SYSINT at SI_ORDER_ANY.
Reviewed by: rwatson, zec
Sponsored by: The FreeBSD Foundation
MFC after: 4 weeks
The /dev/console device node logs all strings that are written to it.
When the string does not contain a trailing newline, it appends one. I
can imagine this was useful a long time ago, but with our current
rc-scripts, it generates a whole bunch of messages that look like:
| Configuring syscons:
| blanktime
| .
By not appending the newlines, the output of `dmesg -a' is now (almost?)
exactly the same as what the user will see on the console device
(syscons, uart).
aio code and are registered via the recently added SYSCALL32_*() helpers.
- Since the aio code likes to invoke fuword and suword a lot down in the
"bowels" of system calls, add a structure holding a set of operations for
things like storing errors, copying in the aiocb structure, storing
status, etc. The 32-bit system calls use a separate operations vector to
handle fuword32 vs fuword, etc. Also, the oldsigevent handling is now
done by having seperate operation vectors with different aiocb copyin
routines.
- Split out kern_foo() functions for the various AIO system calls so the
32-bit front ends can manage things like copying in and converting
timespec structures, etc.
- For both the native and 32-bit aio_suspend() and lio_listio() calls,
just use copyin() to read the array of aiocb pointers instead of using
a for loop that iterated over fuword/fuword32. The error handling in
the old case was incomplete (lio_listio() just ignored any aiocb's that
it got an EFAULT trying to read rather than reporting an error), and
possibly slower.
MFC after: 1 month
causes data corruption in combination with certain bridges.
Information about this problem was kindly provided by davidch. [1]
- As BGE_FLAG_PCIX is meant to indicate that the controller is in
PCI-X mode, revert to the pre __FreeBSD_version 602101 method of
reading the bus mode register rather than checking the mere
existence of a PCI-X capability, which is also there when the
NIC f.e. is put into a 32-bit slot causing it not to be in PCI-X
mode. Setting BGE_FLAG_PCIX inappropriately could cause the NIC
to be tuned incorrectly.
PR: 128833 [1]
Reviewed by: jhb
MFC after: 3 days
When VLAN tagged frame is received the hardware sets 'LONG' bit of
Rx status word. It is always set when the size of received frame
exceeded 1518 bytes, including CRC. This VLAN tagged frame clears
'OK' bit of Rx status word such that driver should not rely on 'OK'
bit of Rx status word to pass the VLAN tagged frame to upper stack.
To fix the bug, don't use SIS_CMDSTS_PKT_OK for Rx error check and
introduce SIS_RXSTAT_ERROR macro that checks Rx errors. If we are
configured to accept VLAN tagged frames and the received frame size
is less than or equal to maximum allowed length of VLAN tagged
frame, clear 'LONG' bit of Rx status word before checking Rx
errors.
Reported by: Vladimir Ermako < samflanker <> gmail DOT com >
Tested by: Vladimir Ermako < samflanker <> gmail DOT com >
to read-locking in the TCP input path, allowing greater TCP
input parallelism where multiple ithreads or ithread and netisr
are able to run in parallel. Previously, most TCP input paths
held a write lock on the global tcbinfo lock, effectively
serializing TCP input.
Before looking up the connection, acquire a write lock if a
potentially state-changing flag is set on the TCP segment header
(FIN, RST, SYN), and otherwise a read lock. We may later have
to upgrade to a write lock in certain cases (ACKs received by the
syncache or during TIMEWAIT) in order to support global state
transitions, but this is never required for steady-state packets.
Upgrading from a write lock to a read lock must be done as a
trylock operation to avoid deadlocks, and actually violates the
lock order as the tcbinfo lock preceeds the inpcb lock held at
the time of upgrade. If the trylock fails, we bump the refcount
on the inpcb, drop both locks, and re-acquire in-order. If
another thread has freed the connection while the locks are
dropped, we free the inpcb and repeat the lookup (this should
hardly ever or never happen in practice).
For now, maintain a number of new counters measuring how many
times various cases execute, and in particular whether various
optimistic assumptions about when read locks can be used, whether
upgrades are done using the fast path, and whether connections
close in practice in the above-described race, actually occur.
MFC after: 6 weeks
Discussed with: kmacy
Reviewed by: bz, gnn, kmacy
Tested by: kmacy
incremented using in_pcbref(), and decremented using in_pcbfree()
or inpcbrele(). Protocols using only current in_pcballoc() and
in_pcbfree() calls will see the same semantics, but it is now
possible for TCP to call in_pcbref() and in_pcbrele() to prevent
an inpcb from being freed when both tcbinfo and per-inpcb locks
are released. This makes it possible to safely transition from
holding only the inpcb lock to both tcbinfo and inpcb lock
without re-looking up a connection in the input path, timer
path, etc.
Notice that in_pcbrele() does not unlock the connection after
decrementing the refcount, if the connection remains, so that
the caller can continue to use it; in_pcbrele() returns a flag
indicating whether or not the inpcb pointer is still valid, and
in_pcbfee() is now a simple wrapper around in_pcbrele().
MFC after: 1 month
Discussed with: bz, kmacy
Reviewed by: bz, gnn, kmacy
Tested by: kmacy
message for r185765.
Noted by: rdivacky
Requested by: des
Commit message for r185765 should be:
In procfs map handler, and in linprocfs maps handler, do not call
vn_fullpath() while having vm map locked. This is done in anticipation
of the vop_vptocnp commit, that would make vn_fullpath sometime
acquire vnode lock.
Also, in linprocfs, maps handler already acquires vnode lock.
No objections from: des
MFC after: 2 week
sbuf instead of doing uiomove. This allows for reads from non-zero
offsets to work.
Patch is forward-ported des@' one, and was adopted to current code
by dchagin@ and me.
Reviewed by: des (linprocfs part)
PR: kern/101453
MFC after: 1 week
does final drop of the the dq reference to put it onto the free list.
There is a possibility that the dq would be found by another thread
after sync and before the dqh lock is acquired. If that other thread
drops the dq before we have taken the dqh lock, the dirty dq is put on
the free list.
Recheck the DQ_MOD after the dqh lock is relocked. Repeat dqsync() if
the dq is dirty. This ensures that up to date dq is written in the quota
file and fixes assertion in dqget().
Reported and tested by: Frode Nordahl <frode nordahl net>
MFC after: 3 days
Waiting for 1ms for each GMII register access looks overkill and it
may also decrease overall performance of driver because re(4)
invokes mii_tick for every hz.
Tested by: rpaulo
laptops. This includes battery presence detection, charging status, current
and voltage readouts, and charge level indication. The sysctl interface
is somewhat ACPI-like.
established a valid link or not. In miibus_statchg handler add a
check for established link is valid one for the controller(e.g.
1000baseT is not a valid link for fastethernet controllers.)
o Added a flag RE_FLAG_FASTETHER to mark fastethernet controllers.
o Added additional check to know whether we've really encountered
watchdog timeouts or missed Tx completion interrupts. This change
may help to track down the cause of watchdog timeouts.
o In interrupt handler, removed a check for link state change
interrupt. Not all controllers have the bit and re(4) did not
rely on the event for a long time. In addition, re(4) didn't
request the interrupt in RL_IMR register.
Tested by: rpaulo
drivers, there should be a 1us delay after every write when
bit-banging the MII. Also insert barriers in order to ensure
the intended ordering. These changes hopefully will solve the
bus wedging occasionally experienced with DM9102A since r182461.
- Deobfuscate dc_mii_readreg() a bit.
loader_conf_files="foo bar baz"
should cause loading the files listed, and then resume with the
remaining config files (from previous values of the variable).
Unfortunately, sometimes the line was ignored -- actually even
modifying the line in /boot/default/loader.conf sometimes doesn't work.
ANALYSIS: After much investigation, turned out to be a bug in the logic.
The existing code detected a new assignment by looking at the address
of the the variable containing the string. This only worked by pure
chance, i.e. if the new string is longer than the previous value
then the memory allocator may return a different address
to store the string hence triggering the detection.
SOLUTION: This commit contains a minimal change to fix the problem,
without altering too much the existing structure of the code.
However, as a step towards improving the quality and reliability of
this code, I have introduced a handful of one-line functions
(strget, strset, strfree, string= ) that could be used in dozens
of places in the existing code.
HOWEVER:
There is a much bigger problem here. Even though I am no Forth
expert (as most fellow src committers) I can tell that much of the
forth code (in support.4th at least) is in severe need of a
review/refactoring:
+ pieces of code are replicated multiple times instead of writing
functions (see e.g. set_module_*);
+ a lot of stale code (e.g. "structure" definitions for
preloaded_files, kernel_module, pnp stuff) which is not used
or at least belongs elsewhere.
The code bload is extremely bad as the loader runs with very small
memory constraints, and we already hit the limit once (see
http://svn.freebsd.org/viewvc/base?view=revision&revision=185132
Reducing the footprint of the forth files is critical.
+ two different styles of coding, one using pure stack functions
(maybe beautiful but surely highly unreadable), one using
high level mechanisms to give names to arguments and local
variables (which leads to readable code).
Note that this code is used by default by all FreeBSD installations,
so the fragility and the code bloat are extremely damaging.
I will try to work fixing the three items above, but if others have
time, please have a look at these issues.
MFC after: 4 weeks
multiple algorithms and potentially collect multiple samples.
Instead of a single calibration interval we now have short and long
intervals; the long interval roughly corresponds to the previous
single interval. The short interval is used to speedup collection
of samples and happens much quicker. We make calls using the short
interval until we're told the calibration work is complete at which
point we fallback to the long interval. In addition there is a
much longer reset interval used to flush all calibration state and
cause everthing to start anew.
With these changes you can also disable calibration entirely by
setting the long interval to zero.
at. I don't think this will make a huge difference, but I have
received a report of a interrupt storm on one 16-bit card that this
might fix (chances are it won't, since I think that we may need to
check both the CBB registers for the 16-bit card as well as the PCIC
registers for power state change).
Submitted by: jhb@
the power interrupt and init code waiting for the interrupt are
running on different CPUs. I haven't seen this make any real
difference, but I've also had some reports of odd behavior I can't
otherwise explain. It is an infrequent operation, and certainly
wouldn't hurt.
my right mouse button and keyboard LEDs from working due to mangled
configuration packets. Fixed several other races and associated problems in the
main ADB stack that were exposed while fixing this.
Now it is possible to suspend/resume with inserted and active card.
To reinitialize card on resume and to detect card change while suspended,
implement bus rescan routines. It can also be used by controllers without
card presence detection signals or with multiple cards per slot support.
While there, cleanup msleep() usage. We have no any rights to exit without
"request done" signal from driver as it could lead to modify after free.
RTFREE_LOCKED() here. This macro makes sure the reference count
on the route is being managed properly. This elimates another
case which results in the following message being printed to the
console:
rtfree: 0xc841ee88 has 1 refs
Reviewed by: bz
MFC after: 2 weeks
bit of debugging afterwards):
- Fix protection code for notification generation.
- Decouple associd from vtag
- Allow vtags to have less strigent requirements in non-uniqueness.
o don't pre-hash them when you issue one in a cookie.
o Allow duplicates and use addresses and ports to
discriminate amongst the duplicates during lookup.
- Add support for the NAT draft draft-ietf-behave-sctpnat-00, this
is still experimental and needs more extensive testing with the
Jason Butt ipfw changes.
- Support for the SENDER_DRY event to get DTLS in OpenSSL working
with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon).
- Update the support of SCTP-AUTH by Peter Lei.
- Use macros for refcounting.
- Fix MTU for UDP encapsulation.
- Fix reporting back of unsent data.
- Update assoc send counter handling to be consistent with endpoint sent counter.
- Fix a bug in PR-SCTP.
- Fix so we only send another FWD-TSN when a SACK arrives IF and only
if the adv-peer-ack point progressed. However we still make sure
a timer is running if we do have an adv_peer_ack point.
- Fix PR-SCTP bug where chunks were retransmitted if they are sent
unreliable but not abandoned yet.
With the help of: Michael Teuxen and Peter Lei :-)
MFC after: 4 weeks
an unclean shutdown would make it impossible to mount rootfs at boot.
PR: kern/128529
Reviewed by: pjd
Approved by: rwatson (mentor)
Sponsored by: FreeBSD Foundation
do not need any locking. Opening and closing translators is serialized
using an sx lock.
Note: This depends on the earlier fix to kern_module.c to properly order
MOD_UNLOAD events.
MFC after: 2 months
memory barriers on i386. It works as a serialization instruction on
all IA32 CPUs.
Alternative solution of using {s,l,}fence requires run-time checking
of the presense of the corresponding SSE or SSE2 extensions, and
possible boot-time patching of the kernel text.
Suggested by: many
parent threads sleep on the parent' struct proc until corresponding
child releases the vmspace. Each sleep is interlocked with proc mutex of
the child, that triggers assertion in the sleepq_add(). The assertion
requires that at any time, all simultaneous sleepers for the channel use
the same interlock.
Silent the assertion by using conditional variable allocated in the
child. Broadcast the variable event on exec() and exit().
Since struct proc * sleep wait channel is overloaded for several
unrelated events, I was unable to remove wakeups from the places where
cv_broadcast() is added, except exec().
Reported and tested by: ganbold
Suggested and reviewed by: jhb
MFC after: 2 week
move that module to the head of the associated linker file's list of modules.
The end result is that once all the modules are loaded, they are sorted in
the reverse of their load order. This causes the kernel linker to invoke
the MOD_QUIESCE and MOD_UNLOAD events in the reverse of the order that
MOD_LOAD was invoked. This means that the ordering of MOD_LOAD events that
is set by the SI_* paramters to DECLARE_MODULE() are now honored in the same
order they would be for SYSUNINIT() for the MOD_QUIESCE and MOD_UNLOAD
events.
MFC after: 1 month
unloading any modules. As a result, if any module veto's an unload
request via MOD_QUIESCE, the entire set of modules for that linker
file will remain loaded and active now rather than leaving the kld
in a weird state where some modules are loaded and some are unloaded.
- This also moves the logic for handling the "forced" unload flag out of
kern_module.c and into kern_linker.c which is a bit cleaner.
- Add a module_name() routine that returns the name of a module and use that
instead of printing pointer values in debug messages when a module fails
MOD_QUIESCE or MOD_UNLOAD.
MFC after: 1 month
interrupt code to be more robust. I've been running these changes for
over a year... With these changes, I don't see the ath card going
into reset like the code in the tree.
packet loss, of between 10-30%. The fix is to put the PHY into
and take it out of local loopback mode when resetting the interface.
Obtained from: Chelsio Inc.
MFC after: 3 days
o Chip full mask revision 2 or later controllers have to
set correct Tx MAC and Tx offload clock depending on negotiated
link speed.
o JMC260 chip full mask revision 2 has a silicon bug that can't
handle 64bit DMA addressing. Add workaround to the bug by
limiting DMA address space to be within 32bit.
o Valid FIFO space of receive control and status register was
changed on chip full mask revision 2 or later controllers. For
these controllers, use default 16QW as it's supposed to be the
safest value for maximum PCIe compatibility. JMicron confirmed
performance will not be reduced even if the FIFO space is set
to 16QW.
o When interface is put into suspend/shutdown state, remove Tx MAC
and Tx offload clock to save more power. We don't need Tx clock
at all in this state.
o Added new register definition for chip full mask revision 2 or
later controllers.
Thanks to JMicron for their continuous support of FreeBSD.
change. As a side effect, this makes the excessive interrupts to
disappear which has been observed as a regression in recent stable/7.
Reported by: many (on -stable@)
Reviewed by: davidch
validation code on ZFS.
Problem: when opening file with O_CREAT|O_EXCL NFS has to jump through
extra hoops to ensure O_EXCL semantics. Namely, client supplies of 8
bytes (NFSX_V3CREATEVERF) bytes of verification data to uniquely
identify this create request. Server then creates a new file with access
mode 0, copies received 8 bytes into va_atime member of struct vattr and
attempt to set the atime on file using VOP_SETATTR. If that succeeds, it
fetches file attributes with VOP_GETATTR and verifies that atime
timestamps match. If timestamps do not match, NFS server concludes it
has probbaly lost the race to another process creating the file with the
same name and bails with EEXIST.
This scheme works OK when exported FS is FFS, but if underlying
filesystem is ZFS _and_ server is running 64bit kernel, it breaks down
due to sanity checking in zfs_setattr function, which refuses to accept
any timestamps which have tv_sec that cannot be represented as 32bit
int. Since struct timespec fields are 64 bit integers on 64bit platforms
and server just copies NFSX_V3CREATEVERF bytes info va_atime, all eight
bytes supplied by client end up in va_atime.tv_sec, forcing it out of
valid 32bit range.
The solution this change implements is simple: it treats
NFSX_V3CREATEVERF as two 32bit integers and unpacks them separately into
va_atime.tv_sec and va_atime.tv_nsec respectively, thus guaranteeing
that tv_sec remains in 32 bit range and ZFS remains happy.
Reviewed by: kib
Close subtle but relatively unlikely race conditions when
propagating the vnode write error to other active sessions
tracing to the same vnode, without holding a reference on
the vnode anymore. [2]
PR: kern/126368 [1]
Submitted by: rwatson [2]
Reviewed by: kib, rwatson
MFC after: 4 weeks
boot0.S changes:
+ import a patch from Christoph Mallon to rearrange the various
print functions and save another couple of bytes;
+ implement the suggestion in PR 70531 to enable booting from
any valid partition because even the extended partitions that
were previously in our kill list may contain a valid boot loader.
This simplifies the code and saves some bytes;
+ followwing up PR 127764, implement conditional code to preserve
the 'Volume ID' which might be used by other OS (NT, XP, Vista)
and is located at offset 0x1b8. This requires a relocation of the
parameter block within the boot sector -- there is no other
possible workaround.
To address this, boot0cfg has been updated to handle both
versions of the boot code;
+ slightly rearrange the strings printed in the menus to make
the code buildable with all options. Given the tight memory
budget, this means that with certain options we need to
shrink or remove certain labels.
and especially:
make -DVOLUME_LABEL -DPXE the default options.
This means that the newly built boot0 block will preserve the
Volume ID, and has the (hidden) option F6 to boot from INT18/PXE.
I think the extra functionality is well worth the change.
The most visible difference here is that the 'Default: ' string
now becomes 'Boot: ' (it can be reverted to the old value
but then we need to nuke 1/2 partition name or entries to
make up for the extra room).
boot0cfg changes:
+ modify the code to recognise the new boot0 structure (with the
relocated options block to make room for the Volume id).
+ add two options, '-i xxxx-xxxx' to set the volume ID, -e c
to modify the character printed in case of bad input
PR: 127764 70531
Submitted by: Christoph Mallon (portions)
MFC after: 4 weeks
contrib/openbsm (svn merge) and sys/{bsm,security/audit} (manual merge).
- Add OpenBSM contrib tree to include paths for audit(8) and auditd(8).
- Merge support for new tokens, fixes to existing token generation to
audit_bsm_token.c.
- Synchronize bsm includes and definitions.
OpenBSM history for imported revisions below for reference.
MFC after: 1 month
Sponsored by: Apple Inc.
Obtained from: TrustedBSD Project
--
OpenBSM 1.1 alpha 2
- Include files in OpenBSM are now broken out into two parts: library builds
required solely for user space, and system includes, which may also be
required for use in the kernels of systems integrating OpenBSM. Submitted
by Stacey Son.
- Configure option --with-native-includes allows forcing the use of native
include for system includes, rather than the versions bundled with OpenBSM.
This is intended specifically for platforms that ship OpenBSM, have adapted
versions of the system includes in a kernel source tree, and will use the
OpenBSM build infrastructure with an unmodified OpenBSM distribution,
allowing the customized system includes to be used with the OpenBSM build.
Submitted by Stacey Son.
- Various strcpy()'s/strcat()'s have been changed to strlcpy()'s/strlcat()'s
or asprintf(). Added compat/strlcpy.h for Linux.
- Remove compatibility defines for old Darwin token constant names; now only
BSM token names are provided and used.
- Add support for extended header tokens, which contain space for information
on the host generating the record.
- Add support for setting extended host information in the kernel, which is
used for setting host information in extended header tokens. The
audit_control file now supports a "host" parameter which can be used by
auditd to set the information; if not present, the kernel parameters won't
be set and auditd uses unextended headers for records that it generates.
OpenBSM 1.1 alpha 1
- Add option to auditreduce(1) which allows users to invert sense of
matching, such that BSM records that do not match, are selected.
- Fix bug in audit_write() where we commit an incomplete record in the
event there is an error writing the subject token. This was submitted
by Diego Giagio.
- Build support for Mac OS X 10.5.1 submitted by Eric Hall.
- Fix a bug which resulted in host XML attributes not being arguments so
that const strings can be passed as arguments to tokens. This patch was
submitted by Xin LI.
- Modify the -m option so users can select more then one audit event.
- For Mac OS X, added Mach IPC support for audit trigger messages.
- Fixed a bug in getacna() which resulted in a locking problem on Mac OS X.
- Added LOG_PERROR flag to openlog when -d option is used with auditd.
- AUE events added for Mac OS X Leopard system calls.
directly include only the header files needed. This reduces the
unneeded spamming of various headers into lots of files.
For now, this leaves us with very few modules including vnet.h
and thus needing to depend on opt_route.h.
Reviewed by: brooks, gnn, des, zec, imp
Sponsored by: The FreeBSD Foundation
Sgtty is a programming interface that has been replaced by termios over
the years. In June we already removed <sgtty.h>, which exposes the
ioctl()'s that are implemented by this interface. The importance of this
flag is overrated right now.
when it sees only received packets. In some cases where a device only
recieves data it mistakenly thinks that its transmitting side is broken
and resets the device.
Obtained from: Chelsio Inc.
MFC after: 3 days
of the boot0.S code, with a number of compile-time selectable options,
the most interesting one being the ability to select PXE booting.
The code is completely compatible with the previous one, and with
the boot0cfg program. Even the actual code is largely unmodified,
with only minor rearrangements or fixes to make room for the new
features.
The behaviour of the standard build differs from the previous
version in the following, minor things:
+ 'noupdate' is the default, which means the code does not
write back the selection to disk. You can enable the feature
at runtime with boot0cfg, or changing the flags in the Makefile.
+ a drive number of 0x00 (floppy, or USB in floppy emulation) is
now accepted as valid. Previously, it was overridden with 0x80,
meaning that the partition table coming from the media was
used to access sectors on a possibly different media.
You can revert to the previous mode building with -DCHECK_DRIVE,
and you can always use the 'setdrv' option in boot0cfg
+ certain FAT or NTFS partitions are listed as WIN instead of DOS.
+ the 'bel' character on a bad selection is replaced by a '#' to
make it clear that the system is not hang even if the machine
does not have a speaker. This can be reverted back at compile
time, or at runtime with an upcoming boot0cfg option.
Additional features are available as compile time options,
and may be become the default if deemed useful. In particular:
+ INT18/PXE boot (make -DPXE)
This option enables booting through INT 18h (which on certain
BIOSes can be hooked to PXE) by pressing F6. There is unfortunately
no room to print the additional menu option.
Also, to make room for the code, the 'Default: ' string is
changed to 'Boot: '
+ print current drive number (make -DTEST)
Prints a line indicating the current drive number.
This is useful to figure out what is going on for machines/bioses
which remap drives in sometimes surprising ways.
+ disable numeric keys in console mode (make -DONLY_F_KEYS)
Not really a significant option, but it is needed to make
room for the -DTEST mode.
+ disable floppy support (make -DCHECK_DRIVE)
Revert to the old behaviour of only accepting 0x80 and above
as valid drive numbers.
MFC after: 6 weeks
entries for one name. Then, creating inode with that name would remove
one entry, leaving others dormant. Reclaiming the vnode would uncover
negative entries, causing false return of ENOENT from the calls like
stat, that do not create inode.
Prevent creation of the duplicated negative entries.
Reported and debugged with: pho
Reviewed by: jhb
X-MFC: after shared lookup changes
hardware for PMCs that have been configured for sampling.
- Bug fix: acknowledge PMC hardware overflows irrespective of the
the (software) PMC's state.
- break complex conditionals in to multiple lines to avoid wrapping
- remove copious unused debug statements
- be more aggressive about cleaning in the calling thread
- eliminate usage of ENOSPC
- increase number of iterations that cxgbsp can do
- eliminate "initerr" usage to simplify ENOBUFS handling
- when coalescing pass all packets to BPF
- always set overrun if hardware queue is full
This changes struct kinfo_filedesc and kinfo_vmentry such that they are
same on both 32 and 64 bit platforms like i386/amd64 and won't require
sysctl wrapping.
Two new OIDs are assigned. The old ones are available under
COMPAT_FREEBSD7 - but it isn't that simple. The superceded interface
was never actually released on 7.x.
The other main change is to pack the data passed to userland via the
sysctl. kf_structsize and kve_structsize are reduced for the copyout.
If you have a process with 100,000+ sockets open, the unpacked records
require a 132MB+ copyout. With packing, it is "only" ~35MB. (Still
seriously unpleasant, but not quite as devastating). A similar problem
exists for the vmentry structure - have lots and lots of shared libraries
and small mmaps and its copyout gets expensive too.
My immediate problem is valgrind. It traditionally achieves this
functionality by parsing procfs output, in a packed format. Secondly, when
tracing 32 bit binaries on amd64 under valgrind, it uses a cross compiled
32 bit binary which ran directly into the differing data structures in 32
vs 64 bit mode. (valgrind uses this to track file descriptor operations
and this therefore affected every single 32 bit binary)
I've added two utility functions to libutil to unpack the structures into
a fixed record length and to make it a little more convenient to use.
offload for VLAN frames are also supported. The VLAN hardware
assistance is available only on 82550/82551 based controllers.
While I'm here change the confusing name of bit1 in byte 22 of
configuration block to vlan_drop_en. The bit controls whether
hardware strips VLAN tagged frame or not. Special thanks to wpaul
who sent valuable VLAN related information to me.
Tested on: i386, sparc64
events. Just reading PMDR register was not enough to have fxp(4)
immuninize against received magic packets during system boot.
Tested by: Alexey Shuvaev < shuvaev <> physik DOT uni-wuerzburg DOT de >
exact multiple of system page size should still be allowed to be mapped
in their entirety to match the regular vnode backed file behavior.
Reported by: ed
Reviewed by: jhb
module; the ath module now brings in the hal support. Kernel
config files are almost backwards compatible; supplying
device ath_hal
gives you the same chip support that the binary hal did but you
must also include
options AH_SUPPORT_AR5416
to enable the extended format descriptors used by 11n parts.
It is now possible to control the chip support included in a
build by specifying exactly which chips are to be supported
in the config file; consult ath_hal(4) for information.
contents.
- It is possible to override the dynamic configuration by using
AT91C_MAIN_CLOCK option in kernel config.
PR: arm/128961 (based on)
Submitted by: Bjorn Konig <bkoenig@alpha-tierchen.de>
Reviewed by: imp
Approved by: kib (mentor, implicit)
by getaudit(2). Some applications such has su, id will interpret E2BIG as
requiring the use of getaudit_addr(2) to pull extended audit state (ip6)
from the kernel.
This change un-breaks the ABI when auditing has been activated on a system
and the users are logged in via ip6.
This is a RELENG_7_1 candidate.
MFC after: 1 day
Discussed with: rwatson
o eliminate private state indexed by 802.11 rate codes; use the hal's
rate tables directly to get the same info
o calculate a mask of operational rates to optimize lookups and checks
(instead of using for loops and similar)
o optimize size bin operations
o ignore rates marked as "do not use" in the hal phy tables
o fix bug that caused upshifting to break in 11g once the rate dropped
below 11Mb/s
o add more intelligent multi-rate tx schedules
o add support for 1/2 and 1/4 width channels
o add dev.ath.X.sample_stats sysctl to dump runtime statistics to the console
(needs to go up to a user app)
o export more tuning knobs via sysctls (still a couple of magic constants)
necessary workarounds, add code to detect these hangs and distinguish
them from other events; note this code is only invoked for anomalous
conditions and (at the moment) is a noop because the hang detection
code is in a new hal that's coming shortly
Volume 3B: System Programming Guide, Part 2", CPUs with family 0x6 and model
above or 0xE and CPUs with family 0xF and model above or 0x3 have invariant
TSC.
Volume 3B: System Programming Guide, Part 2", CPUs with family 0x6 and model
above or 0xE and CPUs with family 0xF and model above or 0x3 have invariant
TSC.
Change types used in the linux' struct msghdr and struct cmsghdr
definitions to the properly-sized architecture-specific types.
Move ancillary data handler from linux_sendit() to linux_sendmsg().
Submitted by: dchagin
Add a custom version of copyiniov() to deal with the 32-bit iovec
pointers from userland (to be used later).
Adjust prototypes for linux_readv() and linux_writev() to use new
l_iovec32 definition and to match actual linux code. In particular,
use ulong for fd (why ?).
Submitted by: dchagin
Bring in updated jail support from bz_jail branch.
This enhances the current jail implementation to permit multiple
addresses per jail. In addtion to IPv4, IPv6 is supported as well.
Due to updated checks it is even possible to have jails without
an IP address at all, which basically gives one a chroot with
restricted process view, no networking,..
SCTP support was updated and supports IPv6 in jails as well.
Cpuset support permits jails to be bound to specific processor
sets after creation.
Jails can have an unrestricted (no duplicate protection, etc.) name
in addition to the hostname. The jail name cannot be changed from
within a jail and is considered to be used for management purposes
or as audit-token in the future.
DDB 'show jails' command was added to aid debugging.
Proper compat support permits 32bit jail binaries to be used on 64bit
systems to manage jails. Also backward compatibility was preserved where
possible: for jail v1 syscalls, as well as with user space management
utilities.
Both jail as well as prison version were updated for the new features.
A gap was intentionally left as the intermediate versions had been
used by various patches floating around the last years.
Bump __FreeBSD_version for the afore mentioned and in kernel changes.
Special thanks to:
- Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches
and Olivier Houchard (cognet) for initial single-IPv6 patches.
- Jeff Roberson (jeff) and Randall Stewart (rrs) for their
help, ideas and review on cpuset and SCTP support.
- Robert Watson (rwatson) for lots and lots of help, discussions,
suggestions and review of most of the patch at various stages.
- John Baldwin (jhb) for his help.
- Simon L. Nielsen (simon) as early adopter testing changes
on cluster machines as well as all the testers and people
who provided feedback the last months on freebsd-jail and
other channels.
- My employer, CK Software GmbH, for the support so I could work on this.
Reviewed by: (see above)
MFC after: 3 months (this is just so that I get the mail)
X-MFC Before: 7.2-RELEASE if possible
to the fs, but before a vnode on the fs is locked, unmount may free fs
structures, causing access to destroyed data and freed memory.
Introduce a vfs_busymp() function that looks up and busies found
fs while mountlist_mtx is held. Use it in nfsrv_fhtovp() and in the
implementation of the handle syscalls.
Two other uses of the vfs_getvfs() in the vfs_subr.c, namely in
sysctl_vfs_ctl and vfs_getnewfsid seems to be ok. In particular,
sysctl_vfs_ctl is protected by Giant by being a non-sleeping sysctl
handler, that prevents Giant-locked unmount code to interfere with it.
Noted by: tegge
Reviewed by: dfr
Tested by: pho
MFC after: 1 month
- Print flags in hex.
- Note that flags can be fine and panic can be due unexpected error condition.
- Remove redundant new line character.
Eventhough panic message excess 80 characters keep it in one line so it is
easier to grep.
In file included from /src/sys/modules/powermac_nvram/../../dev/powermac_nvram/powermac_nvram.c:38:
@/dev/ofw/ofw_bus.h:36:24: error: ofw_bus_if.h: No such file or directory
I am not sure for how long this had not worked and if it was just the
latest vimage commit that had revealed this or if nobody had built
universe successfully in a while. Btw, the tinderbox did not complain
either so that is probably the reason noone had noticed.
underneath #ifdef VIMAGE blocks.
This change introduces some churn in #include ordering and nesting
throughout the network stack and drivers but is not expected to cause
any additional issues.
In the next step this will allow us to instantiate the virtualization
container structures and switch from using global variables to their
"containerized" counterparts.
Reviewed by: bz, julian
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
The mqfs_search() routine uses strncmp() to match message queue objects
by name. This is because it can be called from environments where the
file name is not null terminated (the VFS for example).
Unfortunately it doesn't compare the lengths of the message queue names,
which means if a system has "Queue12345", the name "Queue" will also
match.
I noticed this when a student of mine handed in an exercise using
message queues with names "Queue2" and "Queue".
Reviewed by: rink
IPv6 socket by comparing a constant inp vflag.
This is expected to help to reduce extra locking.
Suggested by: rwatson
Reviewed by: rwatson
MFC after: 6 weeks
IPsec change in r185366 only differed in two additonal IPv6 lines.
Rather than splattering conditional code everywhere add the v6
check centrally at this single place.
Reviewed by: rwatson (as part of a larger changset)
MFC after: 6 weeks (*)
(*) possibly need to leave a stub wrapper in 7 to keep the symbol.
Ignoring different names because of macros (in6pcb, in6p_sp) and
inp vs. in6p variable name both functions were entirely identical.
Reviewed by: rwatson (as part of a larger changeset)
MFC after: 6 weeks (*)
(*) possibly need to leave a stub wrappers in 7 to keep the symbols.
and Core Duo), models 0xF (Core2), model 0x17 (Core2Extreme) and
model 0x1C (Atom).
In these CPUs, the actual numbers, kinds and widths of PMCs present
need to queried at run time. Support for specific "architectural"
events also needs to be queried at run time.
Model 0xE CPUs support programmable PMCs, subsequent CPUs
additionally support "fixed-function" counters.
- Use event names that are close to vendor documentation, taking in
account that:
- events with identical semantics on two or more CPUs in this family
can have differing names in vendor documentation,
- identical vendor event names may map to differing events across
CPUs,
- each type of CPU supports a different subset of measurable
events.
Fixed-function and programmable counters both use the same vendor
names for events. The use of a class name prefix ("iaf-" or
"iap-" respectively) permits these to be distinguished.
- In libpmc, refactor pmc_name_of_event() into a public interface
and an internal helper function, for use by log handling code.
- Minor code tweaks: staticize a global, freshen a few comments.
Tested by: gnn
controllers. ICH based controllers are treated as 82559. 82557,
earlier revision of 82558 and 82559ER have no WOL capability.
o WOL support requires help of a firmware so add check whether
hardware is capable of handling magic frames by reading EEPROM.
o Enable accepting WOL frames only when hardware is about to
suspend or shutdown. Previously fxp(4) used to allow receipt of
magic frame under normal operation mode which could cause
hardware hang if magic frame is received by hardware. Datasheet
clearly states driver should not allow WOL frames under normal
operation mode.
o Disable WOL frame reception in device attach so have fxp(4)
immunize against system hang which can be triggered by magic
packets when the hardware is not in fully initialized state.
o Don't reset all hardware configuration data in fxp_stop()
otherwise important configuration data is lost and this would
reset WOL configuration to default state which in turn cause
hardware hang on receipt of magic frames. To fix the issue,
preserve hardware configuration data by issuing a selective
reset.
o Explicitly disable interrupts after issuing selective reset as
reset may unmask interrupts.
Tested by: Alexey Shuvaev < shuvaev <> physik DOT uni-wuerzburg DOT de >
will sometimes fail to initialize problem due to a lock
contention with management hardware. However, in order to
deliver that fix it was necessary to take a shared code
update as a whole, and this required scattered changes in
the core code to be compatible.
The em driver now has VLAN HW support added as the igb
driver had previously.
MFC after: ASAP - in time for 7.1 RELEASE
-This version has header split, and as a result a number of
aspects of the code have been improved/simplified.
- Interrupt handling refined for performance
- Many small bugs fixed along the way
MFC after: ASAP - in time for 7.1
whitespace) macros from p4/vimage branch.
Do a better job at enclosing all instantiations of globals
scheduled for virtualization in #ifdef VIMAGE_GLOBALS blocks.
De-virtualize and mark as const saorder_state_alive and
saorder_state_any arrays from ipsec code, given that they are never
updated at runtime, so virtualizing them would be pointless.
Reviewed by: bz, julian
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
instead of "puts" which prints whatever is at %si, followed by a CRLF.
It was not noticed during tests because at that point %si points
to a partition entry whose first byte is 0x80, which is both a
terminator for the string and a non printable character.
Submitted by: Christoph Mallon
as in_pcbdetach() and we don't need the code twice.
Reviewed by: rwatson
MFC after: 6 weeks (*)
(*) possibly need to leave a stub wrapper in 7 to keep the symbol.
boot code. The bug was introduced in rev.1.13, and went unnoticed
because FreeBSD's boot1 does not use it, but other systems might.
(I have been struggling for almost a full day trying to figure out
why a syslinux'ed partition would not boot when started with the
FreeBSD /boot/boot0, only to realize that the bug was ours!)
The space for the two extra bytes (push %si and pop %si) is reclaimed
by removing an extra CRLF that is printed before booting.
The bug is not a major one but if there is time it might be a good
thing to merge it into the upcoming releases.
- Bugfix: Don't excede static number of ports allowed when iterating
over endpoints within an interface.
- u3g_speeds contains speeds in baud, not bytes per second, so divide
the buffer size by 10.
throttle. My SMP kernel hangs when one of those is selected by
powerd. Errata AA21 here:
ftp://download.intel.com/design/PentiumXE/specupdt/31030717.pdf
MFC after: 2 weeks
o Configure controller to use dynamic TBD as TSO requires that
operation mode.
o Add a dummy TBD to tx_cb_u as TSO can access one more TBD in TSO
operation.
o Increase a DMA segment size to 4096 to hold a full IP segment
with link layer header.
o Unlike other TSO capable controllers, 82550/82551 does not
modify the first IP packet in TSO operation so driver should
create an IP packet with proper header. Subsequent IP packets
are generated from the header information in the first IP packet
header. Likewise pseudo checksum also should be computed by
driver for the first packet.
o TSO requires one more TBD to hold total TCP payload. To make
code simple for TSO/non-TSO case, increase the index of the
first available TBD array.
o Remove KASSERT that checks the size of a DMA segment should be
less than or equal to MCLBYTES as it's no longer valid in TSO.
o Tx threshold and number of TBDs field is used to store MSS in
TSO. So don't set the Tx threshold in TSO case.
82559 or later controllers added simple checksum calculation logic
in RU. For backward compatibility the computed checksum is appended
at the end of the data posted to Rx buffer. This type of simple
checksum calculation support had been used on several vendors such
as Sun HME/GEM, SysKonnect GENESIS and Marvell Yukon controllers.
Because this type of checksum offload support requires parsing of
received frame and pseudo checksum calculation with software
routine it still consumes more CPU cycles than that of full-fledged
checksum offload controller. But it's still better than software
checksum calculation.
Rx buffer and loads DMA map. Also add a function
fxp_discard_rfabuf that handles reusing Rx buffer/DMA map. With
this change fxp_add_rfabuf just handles appending a new RFA to
existing chain.
o Initialize mbuf length in fxp_new_rfabuf.
o Don't reset rnr and have fxp(4) handle received frames even if
it couldn't allocate new Rx buffer. This will make fxp(4) reload
updated RFA under rnr case. The rnr would still be reset to 0 if
polling is active and fxp(4) processed number of allowed Rx
events.
o Update if_iqdrops if fxp(4) couldn't allocate Rx buffer.
Previously fxp(4) used to try to reuse Rx buffer when new buffer
allocation is failed. But fxp(4) didn't take into account loaded
DMA map such that the same DMA map was loaded again without
unloading the map. There is no reason to unload the loaded map and
reload the same map again, just reusing the map is enough. I
believe the spare DMA map in softc was introduced to implement this
behaviour. Also fxp(4) used to stop Rx processing if once Rx buffer
allocation or DMA map load fails which in turn resulted in losing
incoming frames under heavy network load. With this change fxp(4)
should survive from resource shortage condition.
practice, but it is a good programming practice and allows the kernel to not
depend on userland correctness.
- While there, make sizeof usage match the rest of the code.
Found with: Coverity Prevent(tm)
CID: 660, 662
practice, but it is a good programming practice nontheless and it allows the
kernel to not depend on userland correctness.
Found with: Coverity Prevent(tm)
CID: 655-659, 664-667
o Copy kb920x_machdep.c to at91_machdep.c
o Move board_init to new board_kb920x.c
o rename ramsize to at91_ramsize and make it accessible to board_* files.
o Delete files.kb920x. We can do this selection with the new boards.
o Add a stub for the tsc4370 board init, which will be added in
a future commit.
o Add new 'devices' at91_board_kb920x and at91_board_tsc4370. More are
needed and will be added in future commits.
Reviewed by: stass, cognet
advance of teaching vn_fullpath1() how to query file systems for
vnode-to-name mappings when cache lookups fail.
Thanks to kib for guidance and patience on this process.
Reviewed by: kib
Approved by: kib
Fix some issues about re-scanning of the devices.
src/lib/libusb20/libusb20_ugen20.c
Fix issue about libusb20 having to release the
USB transfers before doing a SET_CONFIG, else
the kernel will kill the file handle.
src/sys/dev/usb2/core/usb2_device.
src/sys/dev/usb2/core/usb2_generic.c
src/sys/dev/usb2/core/usb2_generic.h
Add support for U3G devices.
Improve and cleanup FIFO free handling.
Improve device re-enumeration.
src/sys/dev/usb2/core/usb2_msctest.c
src/sys/dev/usb2/core/usb2_msctest.h
Fix some problems in the USB Mass Storage Test.
Add Huawei vendor specific quirks.
src/sys/dev/usb2/core/usb2_request.c
Improve device re-enumeration.
src/sys/dev/usb2/ethernet/if_aue2.c
src/sys/dev/usb2/include/usb2_devid.h
src/sys/dev/usb2/include/usb2_devtable.h
src/sys/dev/usb2/quirk/usb2_quirk.c
Integrate changes from the old USB driver.
src/sys/dev/usb2/include/usb2_standard.h
Add definition of USB3.0 structures from USB.org.
src/sys/dev/usb2/serial/u3g2.c
src/sys/dev/usb2/serial/ugensa2.c
src/sys/modules/usb2/Makefile
src/sys/modules/usb2/serial_3g/Makefile
Import U3G driver.
Submitted by: Hans Petter Selasky (usb4bsd)
many bugs fixes, many more performance improvements.
Submitted by: Danny Braniss
M sbin/iscontrol/iscsi.conf.5
M sbin/iscontrol/iscontrol.8
M sbin/iscontrol/iscontrol.h
M sbin/iscontrol/config.c
M sbin/iscontrol/fsm.c
M sbin/iscontrol/login.c
M sbin/iscontrol/pdu.c
M sbin/iscontrol/misc.c
M sbin/iscontrol/auth_subr.c
M sbin/iscontrol/iscontrol.c
M sys/dev/iscsi/initiator/isc_cam.c
M sys/dev/iscsi/initiator/iscsi.h
M sys/dev/iscsi/initiator/isc_soc.c
M sys/dev/iscsi/initiator/iscsi_subr.c
M sys/dev/iscsi/initiator/iscsivar.h
M sys/dev/iscsi/initiator/isc_subr.c
M sys/dev/iscsi/initiator/iscsi.c
M sys/dev/iscsi/initiator/isc_sm.c
IFF_DRV_OACTIVE to note resource shortage to upper stack.
- Don't count number of mbuf chains. Default 32 DMA segments for a
frame is enough for most cases. If bus_dmamap_mbuf_sg fails use
m_collapse(9) to collapse the mbuf chain instead of relying on
expensive m_defrag(9).
- Move bpf handling to fxp_start_body() which is supposed to be
more appropriate place.
- Always arm watchdog timer whenever a new Tx request is made.
Previously fxp(4) used to arm watchdog timer only when
FXP_CXINT_THRESH-th Tx request is made. Because fxp(4) does not
rely on Tx interrupt to reclaim transmitted mbufs it's better to
arm watchdog timer to detect potential lockups.
- Add more aggresive Tx buffer reclaiming in fxp_start_body to make
room for new Tx requests. Since fxp(4) does not request Tx
completion interrupt for every frames it's necessary to clean
TXCBs in advance to saturate link.
- Make fxp(4) try to start more packets transmitting regardless of
interrupt type in fxp_intr_body.
patch the RX/TX performance becomes about 17~18 Mbps comparing with
the previous whose values were RX 7~8Mbps and TX 13~14Mbps.
- improve AL2230 RF handling in zd1211b
- support AL2230S RF that PV2000 is renamed to AL2230S
- use register ZYD_CR244, ZYD_CR243, ZYD_CR242 when the driver writes
values on RF. This routine is more faster than the original one
- use private TX lock to avoid LOR at zyd_raw_xmit()
- increase TX slots from 1 to 5
- needs to set the channel at IEEE80211_S_AUTH not IEEE80211_S_RUN
- detailed error handling. In previous the next command was sent to the
device even if there was errors
- setting ZYD_MAC_RX_THRESHOLD value should be different between 1211
and 1211b
- only try to stop the device at zyd_init_locked() if the device is
UPed
- do not use MTX_RECURSE
- do not try to grap Giant lock when the channel is changing
- move the device initialization routines from zyd_attach to zyd_init to
give a device full-reset chance to the driver.
- code cleanup at zyd_raw_xmit()
- simplify zyd_attach() routines
- resort functions and clean up variables
- DPRINTF style change.
- style(9)
Reviewed by: sam
check to fxp_txeof(). While I'm here unarm watchdog timer only if
there are no pending queued Tx requests.
Previously the watchdog timer was unarmed whenever Tx interrupt is
raised. This could be resulted in hiding root cause of watchdog
timeouts.
checksum offload configuration. Now checksum offload can be
controlled by ifconfig(8).
While I'm here add an additional check for interface capabilities
before applying user's request.
configured, change the message to let people know this is a
possibility. I've slightly changed the message from the one
submitted by Pekka to keep the printf on one line.
Submitted by: Pekka Savola <pekkas@netcore.fi>
the comparison between c and val and then compare val to _POSIX_VDISABLE.
This avoids comparing c (which is usually of type char) to
_POSIX_VDISABLE (which has value 0xff and may not be representable
as a char).
Reviewed by: ed
nodes capabilities. Add "Analog"/"Digital" marks to the pcm device names.
I hope it will help new users easier accept concept of several PCM devices
and understand exact purposes of that devices.
mnt_lock is before lock of any vnode on the mp, it uses LK_NOWAIT. Since
MNTK_UNMOUNT may be transient, pdp lock is dropped when vfs_busy()
failed, and operation is retried after some time. This way, ffs_vget()
is not called on the mp that may be in the process of being destroyed by
unmount.
Check for the VI_DOOMED flag on pdp after its lock is reacquired, to
better detect some situations where directory containing ".."
entry is removed during the lookup.
Reviewed by: tegge, attilio (previous version)
Tested by: pho
MFC after: 1 month
of the ABI of the currently executing image. Change some places to test
the flags instead of explicit comparing with address of known sysentvec
structures to determine ABI features.
Discussed with: dchagin, imp, jhb, peter
- invert sense of hw.cxgb.singleq tunable to hw.cxgb.multiq
- don't wake up transmitting thread by default
- add per tx queue ifaltq to handle ALTQ
- remove several unused functions in cxgb_multiq.c
- add several sysctls: multiq_tx_enable, coalesce_tx_enable,
and wakeup_tx_thread
- this obsoletes the hw.cxgb.snd_queue_len as ifq is replaced
by a buf_ring
and ifnet functions
- add memory barriers to <machine/atomic.h>
- update drivers to only conditionally define their own
- add lockless producer / consumer ring buffer
- remove ring buffer implementation from cxgb and update its callers
- add if_transmit(struct ifnet *ifp, struct mbuf *m) to ifnet to
allow drivers to efficiently manage multiple hardware queues
(i.e. not serialize all packets through one ifq)
- expose if_qflush to allow drivers to flush any driver managed queues
This work was supported by Bitgravity Inc. and Chelsio Inc.
1) Fix a bug in dealing with the Alerus 1006 PHY which prevented the
device from ever coming back up once it had been set to down.
2) Add a kernel tunable (hw.cxgb.snd_queue_len) which makes it possible
to give the device more than IFQ_MAXLEN entries in its send queue. The
default remains 50.
3) Add code to place the card'd identification and serial number into
its description (%desc) so that users can tell which card they have
installed.
and XMITS has to be basically done in the same manner as for
the Sabres, i.e. only for devices behind PCI-PCI-bridges and
after a PIO read on the far side of the farest PCI-PCI-bridge.
Given that the Tomatillo documentation mentions no difference
to the Schizo bridges in this regard and this is also still
part of the procedure described Schizo documentation this
seems about right so adjust accordingly (the unconditional
CDMA flushing/syncing previously done was based on how Linux
behaves).
- Implement CDMA flushing/syncing for Schizo version >= 5,
which requires the workaround described in Schizo Errata I-23.
According to Schizo Errata I-13 it's just unusable with
version < 5 though. [1]
- Don't register the Schizo streaming buffer for now until it's
usage is sorted out according to the erratas.
- Register our interrupt filters with the revived INTR_FAST so
they these interrupts can even interrupt filters of device
drivers as necessary.
- Remove the comment regarding lack of newbus'ified bus_dma(9)
as being able to associate a DMA tag with a device would
allow to implement CDMA flushing/syncing in bus_dmamap_sync(9)
but that would totally kill performance. Given that for devices
not behind a PCI-PCI bridge the host-to-PCI bridges also only
do CDMA flushing/syncing based on interrupts there's no
additional disadvantage for polling(4) callbacks in the case
schizo(4) has to do the CDMA flushing/syncing but rather a
general problem.
Reported by: Michael Moll [1]
above) exhibits some misbehaviours on machines with AMD64 CPUs,
which at least in some cases I have tracked down to a heap overflow.
It is unclear whether it depends on the CPU or on the pxe bios
itself which may use more memory on AMD machines.
Noticeably a pxeboot compiled from 6.x sources works fine on all
machines I have tried so far, while a pxeboot compiled from 7.x
sources does not.
This patch is a first step in reducing the amount of memory used
while processing the configuration files read by the loader at boot
(some of them are quite large, 1700+ lines), and it does so by:
+ moving a buffer to static memory instead of allocating in the heap;
+ skipping empty lines;
+ reducing the amount of memory used for line descriptors;
Unfortunately there are several changes between 6.x and above,
affecting the compiler, the loader code itself, and libstand,
and it is not so straightforward to
These changes fix the behaviour on one motherboard with a
single-core AMD cpu, but are still not enough e.g on an Asus
M2N-VM (with a dual-core CPU).
I need to investigate the problem a bit more before figuring
out what should be committed to RELENG_7
PR: kern/118222
filters instead of PIL_FAST and allow special filters and handlers
for interrupts which need to be able to interrupt even filters, f.e.
bus error interrupts, to be registered with the revived INTR_FAST
at PIL_FAST.
and output, set BUS_DMA_COHERENT when creating the DMA map used for
loading the buffer. As a side-effect this solves locking issues on
sparc64 when dcons(4) calls bus_dmamap_sync(9) while in an interrupt
filter, which are executed in a critical section, and iommu(4) has
to use a sleep lock when taking advantage of the streaming buffer.
Reported and tested by: kensmith
Approved by: simokawa
For some reason the nmdm(4) driver doesn't use CALLOUT_MPSAFE, even
though we live in the MPSAFE TTY era. Add the CALLOUT_MPSAFE flags.
System survives.
- Only non-sliced bsdlabel style partitioning is currently supported (but provisions
are made towards GPT support, which should follow soon)
- Enable storage support in loader on ARM
Obtained from: Semihalf
to gptboot, i.e. installed in a freebsd-boot partition using /sbin/gpart or
/sbin/gpt.
Tweak the /boot/loader ZFS support so that it can find ZFS pools that are
contained in GPT partitions.
for virtualization.
Instead of initializing the affected global variables at instatiation,
assign initial values to them in initializer functions. As a rule,
initialization at instatiation for such variables should never be
introduced again from now on. Furthermore, enclose all instantiations
of such global variables in #ifdef VIMAGE_GLOBALS blocks.
Essentialy, this change should have zero functional impact. In the next
phase of merging network stack virtualization infrastructure from
p4/vimage branch, the new initialization methology will allow us to
switch between using global variables and their counterparts residing in
virtualization containers with minimum code churn, and in the long run
allow us to intialize multiple instances of such container structures.
Discussed at: devsummit Strassburg
Reviewed by: bz, julian
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
src/sys/dev/usb2/core/usbdevs
src/sys/dev/usb2/include/urio2_ioctl.h
src/sys/dev/usb2/storage/ustorage2_fs.h
These files are not used any more.
src/usr.sbin/Makefile
src/etc/mtree/BSD.include.dist
src/include/Makefile
src/lib/Makefile
src/share/man/man7/hier.7
src/share/mk/bsd.libnames.mk
src/etc/mtree/BSD.include.dist
Make "usbconfig" and "libusb20" a part of the default build.
src/sys/dev/usb/rio500_usb.h
src/sys/dev/usb2/storage/urio2.c
Use common include file.
src/sys/dev/usb2/bluetooth/ng_ubt2.c
Make USB bluetooth depend on "ng_hci" module.
src/sys/dev/usb2/controller/ehci2.c
src/sys/dev/usb2/controller/ehci2.h
Patches for Marvell EHCI.
src/sys/dev/usb2/core/usb2_busdma.c
Bugfix for 64-bit platforms. Need to unload the previously loaded DMA
map and some cleanup regarding some corner cases.
src/sys/dev/usb2/core/usb2_core.h
src/sys/dev/usb2/core/usb2_dev.c
src/sys/dev/usb2/core/usb2_dev.h
Bugfix for libusb filesystem interface.
New feature: Add support for filtering device data at the expense of the
userland process.
Add some more comments.
Some minor code styling.
Remove unused function, usb2_fifo_get_data_next().
Fix an issue about "fifo_index" being used instead of "ep_index".
src/sys/dev/usb2/core/usb2_device.c
src/sys/dev/usb2/core/usb2_generic.c
Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when
doing an alternate setting.
Cleanup USB IOCTL and USB reference handling.
Fix a corner case where USB-FS was left initialised after
setting a new configuration or alternate setting.
src/sys/dev/usb2/core/usb2_hub.c
Improvement: Check all USB HUB ports by default at least one time.
src/sys/dev/usb2/core/usb2_request.c
Bugfix: Make sure destination ASCII string is properly zero terminated
in all cases.
Improvement: Skip invalid characters instead of replacing with a dot.
src/sys/dev/usb2/core/usb2_util.c
src/sys/dev/usb2/image/uscanner2.c
Spelling.
src/sys/dev/usb2/include/Makefile
Share "usbdevs" with the old USB stack.
src/sys/dev/usb2/include/usb2_devid.h
src/sys/dev/usb2/include/usb2_devtable.h
Regenerate files.
Alfred: Please fix the RCS tag at the top.
src/sys/dev/usb2/include/usb2_ioctl.h
Fix compilation of "kdump".
src/sys/dev/usb2/serial/ubsa2.c
src/sys/dev/usb2/serial/ugensa2.c
Remove device ID's which will end up in a new 3G driver.
src/sys/dev/usb2/sound/uaudio2.c
Correct a debug printout.
src/sys/dev/usb2/storage/umass2.c
Sync with old USB stack.
src/lib/libusb20/libusb20.3
Add more documentation.
src/lib/libusb20/libusb20.c
Various bugfixes and improvements.
src/usr.sbin/usbconfig/dump.c
src/usr.sbin/usbconfig/usbconfig.c
New commands for dumping strings and doing custom USB requests from
the command line.
Remove keyword requirements from generated files:
"head/sys/dev/usb2/include/usb2_devid.h"
"head/sys/dev/usb2/include/usb2_devtable.h"
ask NDINIT to return a locked vnode instead of letting it drop the
lock and return a referenced vnode and then relock the vnode a few
lines down. This matches the behavior of other filesystem mount routines.
- An "at" hint now reserves a device name.
- A new BUS_HINT_DEVICE_UNIT method is added to the bus interface. When
determining the unit number of a device, this method is invoked to
let the bus driver specify the unit of a device given a specific
devclass. This is the only way a device can be given a name reserved
via an "at" hint.
- Implement BUS_HINT_DEVICE_UNIT() for the acpi(4) and isa(4) bus drivers.
Both of these busses implement this by comparing the resources for a
given hint device with the resources enumerated by ACPI/PnPBIOS and
wire a unit if the hint resources are a subset of the "real" resources.
- Use bus_hinted_children() for adding hinted devices on isa(4) busses
now instead of doing it by hand.
- Remove the unit kludging from sio(4) as it is no longer necessary.
Prodding from: peter, imp
OK'd by: marcel
MFC after: 1 month
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
read before we configure the card, so we can implement
/dev/cardbus*.cis. Also, do this on a per-child basis, so we now have
a different name than before. I think i'll have to fix that for some
legacy tools to keep working.
I can now do a dumpcis on my running atheros card and have it still work!
kern_unlinkat(), that expects that vn_start_write() actually fills the mp
even when the call failed.
As Tor noted, that pattern relies on the the type stability of the mount
points, as well as that suspended mount points are never freed and
V_XSLEEP is always passed to vn_start_write() when called on a freed
mount point.
Reported by: stass
Reviewed by: tegge
PR: 123768
rerun of the streaming cache for silicon bug workarounds.
- Announce the presence of a streaming cache on attach for
informational purposes.
- For performance reasons don't do unnecessary flushes of the
streaming cache when coherent mappings are synced.
- Fix some minor style issues.
class CPUs. In theory one could also use versions additionally
taking advantage of the prefetch cache with cheetah-class CPUs,
in my worldstone runs these either didn't provide extra speedup
(USIII+) in comparison to the existing spitfire versions or were
even slightly slower (USIIIi) though, so they aren't committed
for now.
The basic problem leading to the VIS-based copy/zero functions
being initially disabled for cheetah-class CPUs was solved by
letting cheetah_init() clear DCR_IFPOE.
redundant malloc/free. Add comments about how this should really be
done. Fix an overly verbose comment about under 1MB mapping: go ahead
and set the bits, but we ignore them.
- If the flag is set and auto-select fails, assume disk is not present.
- Set disk empty flag only when the floppy controller reset is needed.
It fixes regression introduced in r1.311, which prevented it from ignoring
errors. Now fdformat(1) and dd(1) with conv=noerror option can continue
when read/write errors occur as they should.
- Do not retry disk probing as it is extremely slow and pointless.
- Move the disk probing code into a separate function.
- Do not reset disk empty flag if write-protect check fails somehow.
PR: kern/116538[1]
I have fixed the reported problems - if you still have trouble with it, please
contact me with as much detail as possible so that I can track down any other
issues as quickly as possible.
In my commit that moved uname(), setdomainname() and getdomainname() to
COMPAT_FREEBSD4, I also removed PRIV_SETDOMAINNAME, because it was
already protected by userland_sysctl(). We'd better keep the number 20
reserved, to prevent it from being used again.
Requested by: rwatson
pointer in a local thread. While this is unlikely to significantly
improve performance given modern compiler behavior, it makes the code
more readable and reduces diffs to the Mac OS X version of the same
code (which stores things in creds in the same way, but where the
cred for a thread is reached quite differently).
Discussed with: sson
MFC after: 1 month
Sponsored by: Apple Inc.
Obtained from: TrustedBSD Project
the softc is reset a few times during probing.
Print 'changing to modem mode' messages if booting verbose to show the
reason for the time delay. Note: Some devices (Huawei for one) take 20
seconds to appear on the USB bus).
up space. If the buffer cache fills up then the disk systems can
grind to a halt. Better tuning can be figured out later.
Tested by: Tim, others and work
Reviewed by: Kostik Belousov
PR: 128832
the nfsd problems that some people have with the new code.
Add support for the vfs.nfsrv.nfs_privport sysctl which denies access unless
the client is using a port number less than 1024. Not really sure if this is
particularly useful since it doesn't add any real security.
fix the problems a few people have noticed with the new code. People who want
to continue testing the new code or who need RPCSEC_GSS support should use
the new option NFS_NEWRPC to select it.
can be controlled by ifconfig(8). Note, VLAN hardware tagging
controls still lacks required handler but it requires more driver
cleanups so I didn't touch that part.
PR: kern/128766
queue length variables as well, avoiding storing the limit in a larger
type than the length.
Submitted by: sson
Sponsored by: Apple Inc.
MFC after: 1 week
changes since the last imported OpenBSM release:
OpenBSM 1.1 alpha 2
- Include files in OpenBSM are now broken out into two parts: library builds
required solely for user space, and system includes, which may also be
required for use in the kernels of systems integrating OpenBSM. Submitted
by Stacey Son.
- Configure option --with-native-includes allows forcing the use of native
include for system includes, rather than the versions bundled with OpenBSM.
This is intended specifically for platforms that ship OpenBSM, have adapted
versions of the system includes in a kernel source tree, and will use the
OpenBSM build infrastructure with an unmodified OpenBSM distribution,
allowing the customized system includes to be used with the OpenBSM build.
Submitted by Stacey Son.
- Various strcpy()'s/strcat()'s have been changed to strlcpy()'s/strlcat()'s
or asprintf(). Added compat/strlcpy.h for Linux.
- Remove compatibility defines for old Darwin token constant names; now only
BSM token names are provided and used.
- Add support for extended header tokens, which contain space for information
on the host generating the record.
- Add support for setting extended host information in the kernel, which is
used for setting host information in extended header tokens. The
audit_control file now supports a "host" parameter which can be used by
auditd to set the information; if not present, the kernel parameters won't
be set and auditd uses unextended headers for records that it generates.
OpenBSM 1.1 alpha 1
- Add option to auditreduce(1) which allows users to invert sense of
matching, such that BSM records that do not match, are selected.
- Fix bug in audit_write() where we commit an incomplete record in the
event there is an error writing the subject token. This was submitted
by Diego Giagio.
- Build support for Mac OS X 10.5.1 submitted by Eric Hall.
- Fix a bug which resulted in host XML attributes not beingguments so that const strings can be passed
as arguments to tokens. This patch was submitted by Xin LI.
- Modify the -m option so users can select more then one audit event.
- For Mac OS X, added Mach IPC support for audit trigger messages.
- Fixed a bug in getacna() which resulted in a locking problem on Mac OS X.
- Added LOG_PERROR flag to openlog when -d option is used with auditd.
- AUE events added for Mac OS X Leopard system calls.
Obtained from: TrustedBSD Project
Sponsored by: Apple Inc.
- Fix to ioctl path in which the length could be 0 which means
no data in/out from LSI.
- Fix to ioctl path in which the data in the sense data space
of the ioctl packet is a really a pointer to some location in
user-space. From LSI re-worked a bit by me.
- Add HW support for next gen cards from LSI.
Thanks to LSI for their support!
Submitted by: jhb, LSI
MFC after: 3 days
-Improvement: panic() on INVARIANTS kernels if memory allocation
fails for a tagblock in sctp_add_vtag_to_timewait().
-Bugfix: Protect code in sctp_is_in_timewait() by
SCTP_INP_INFO_WLOCK/SCTP_INP_INFO_WUNLOCK.
-Cleanup: Get rid of unused variable now in sctp_init_asoc().
-Bugfix: Reuse the correct vtag in sctp_add_vtag_to_timewait().
-Cleanup: Get rid of unused constant SCTP_TIME_WAIT_SHORT
in sctp_constants.h.
-Improvement: Use all hash buckets of the vtag hash table.
-Cleanup: Get rid of then unused constant SCTP_STACK_VTAG_HASH_SIZE_A.
-Bugfix: Handle SHUTDOWN;SACK packet correctly.
-Bugfix: Last TSN in a gap ack block was not being "ack'd"
in the internal scoreboard.
Obtained from: (with help from Michael Tuexen)
The same (vendor, product) tuple is used for aue(4) adapters,
but I am not sure if the quirk is correct. I'm using the USB
device 'release' info to skip aue(4) detection right now, but
if there's a better way to differentiate between USB-LAN and
USB Bluetooth we should update the quirk.
Reviewed by: imp, rink
MFC after: 2 weeks
controller. The controller is also known as L1E(AR8121) and
L2E(AR8113/AR8114). Unlike its predecessor Attansic L1,
AR8121/AR8113/AR8114 uses completely different Rx logic such that
it requires separate driver. Datasheet for AR81xx is not available
to open source driver writers but it shares large part of Tx and
PHY logic of L1. I still don't understand some part of register
meaning and some MAC statistics counters but the driver seems to
have no critical issues for performance and stability.
The AR81xx requires copy operation to pass received frames to upper
stack such that ale(4) consumes a lot of CPU cycles than that of
other controller. A couple of silicon bugs also adds more CPU
cycles to address the known hardware bug. However, if you have fast
CPU you can still saturate the link.
Currently ale(4) supports the following hardware features.
- MSI.
- TCP Segmentation offload.
- Hardware VLAN tag insertion/stripping with checksum offload.
- Tx TCP/UDP checksum offload and Rx IP/TCP/UDP checksum offload.
- Tx/Rx interrupt moderation.
- Hardware statistics counters.
- Jumbo frame.
- WOL.
AR81xx PCIe ethernet controllers are mainly found on ASUS EeePC or
P5Q series of ASUS motherboards. Special thanks to Jeremy Chadwick
who sent the hardware to me. Without his donation writing a driver
for AR81xx would never have been possible. Big thanks to all people
who reported feedback or tested patches.
HW donated by: koitsu
Tested by: bsam, Joao Barros <joao.barros <> gmail DOT com >
Jan Henrik Sylvester <me <> janh DOT de >
Ivan Brawley < ivan <> brawley DOT id DOT au >,
CURRENT ML
Peter Holm just discovered this funny bug inside the TTY code: if
uiomove() in ttydisc_write() returns an error, we forget to relock the
TTY before jumping out of ttydisc_write(). Fix it by placing
tty_unlock() and tty_lock() around uiomove().
Submitted by: pho
regular header tokens. The extended header tokens contain an IP
or IPv6 address which makes it possible to identify which host an
audit record came from when audit records are centralized.
If the host information has not been specified, the system will
default to the old style headers. Otherwise, audit records that
are created as a result of system calls will contain host information.
This implemented has been designed to be consistent with the Solaris
implementation. Host information is set/retrieved using the A_GETKAUDIT
and A_SETKAUDIT auditon(2) commands. These commands require that a
pointer to a auditinfo_addr_t object is passed. Currently only IP and
IPv6 address families are supported.
The users pace bits associated with this change will follow in an
openbsm import.
Reviewed by: rwatson, (sson, wsalamon (older version))
MFC after: 1 month
- Use `fildes[2]' instead of `*fildes' to make more clear that pipe(2)
fills an array with two descriptors.
- Remove EFAULT from the manual page. Because of the current calling
convention, pipe(2) raises a segmentation fault when an invalid
address is passed.
- Introduce kern_pipe() to make it easier for binary emulations to
implement pipe(2).
- Make Linux binary emulation use kern_pipe(), which means we don't have
to recover td_retval after calling the FreeBSD system call.
Approved by: rdivacky
Discussed on: arch
This prevents a panic which occurs when a driver attempts to load
firmware at boot via firmware_get() when the firmware module has not
been preloaded. firmware_get() will enqueue a task using a struct
taskqueue allocated on the stack, and the machine will crash much
later in the firmware taskq thread when taskqs are started and the
struct taskqueue is garbage.
Not objected to by: sam
- Do not let individual KLD module unregister firmware image loaded by ispfw
or vice versa.
- Make 'kldunload ispfw' actually unregister all firmware images loaded by
ispfw, not just 'isp_1040'.
- Print which KLD module actually loaded the firmware image.
- Remove unused return value from do_load_fw() and do_unload_fw() and remove
duplicate sys/param.h while I am here.
dependencies. A 'struct pmc_classdep' structure describes operations
on PMCs; 'struct pmc_mdep' contains one or more 'struct pmc_classdep'
structures depending on the CPU in question.
Inside PMC class dependent code, row indices are relative to the
PMCs supported by the PMC class; MI code in "hwpmc_mod.c" translates
global row indices before invoking class dependent operations.
- Augment the OP_GETCPUINFO request with the number of PMCs present
in a PMC class.
- Move code common to Intel CPUs to file "hwpmc_intel.c".
- Move TSC handling to file "hwpmc_tsc.c".
Looking at our source code history, it seems the uname(),
getdomainname() and setdomainname() system calls got deprecated
somewhere after FreeBSD 1.1, but they have never been phased out
properly. Because we don't have a COMPAT_FREEBSD1, just use
COMPAT_FREEBSD4.
Also fix the Linuxolator to build without the setdomainname() routine by
just making it call userland_sysctl on kern.domainname. Also replace the
setdomainname()'s implementation to use this approach, because we're
duplicating code with sysctl_domainname().
I wasn't able to keep these three routines working in our
COMPAT_FREEBSD32, because that would require yet another keyword for
syscalls.master (COMPAT4+NOPROTO). Because this routine is probably
unused already, this won't be a problem in practice. If it turns out to
be a problem, we'll just restore this functionality.
Reviewed by: rdivacky, kib
On RELENG_6 (and probably RELENG_7) we see our syscons windows and
pseudo-terminals have the following buffer sizes:
| LINE RAW CAN OUT IHIWT ILOWT OHWT LWT COL STATE SESS PGID DISC
| ttyv0 0 0 0 7680 6720 2052 256 7 OCcl 1146 1146 term
| ttyp0 0 0 0 7680 6720 1296 256 0 OCc 82033 82033 term
These buffer sizes make no sense, because we often have much more output
than input, but I guess having higher input buffer sizes improves
guarantees of the system.
On MPSAFE TTY I just sent both the input and output buffer sizes to 7
KB, which is pretty big on a standard FreeBSD install with 8 syscons
windows and some PTY's. Reduce the baud rate to 9600 baud, which means
we now have the following buffer sizes:
| LINE INQ CAN LIN LOW OUTQ USE LOW COL SESS PGID STATE
| ttyv0 1920 0 0 192 1984 0 199 7 2401 2401 Oil
| pts/0 1920 0 0 192 1984 0 199 5631 1305 2526 Oi
This is a lot smaller, but for pseudo-devices this should be good
enough. You need to do a lot of punching to fill up a 7.5 KB input
buffer. If it turns out things don't work out this way, we'll just
switch to 19200 baud.
from one parent directory to another, in addition to the usual access checks
one also needs write access to the subdirectory being moved.
Approved by: rwatson (mentor), pjd
still valid. We were checking the state of the header and
not the table.
PR: 119868
Based on a patch from: Jaakko Heinonen <jh@saunalahti.fi>
MFC after: 1 week
tcp_mss() and tcp_mss_update() so that tcp_mtudisc() could
re-use the same code.
Move the TSO logic back to tcp_mss() and out of tcp_mss_update().
We tried to avoid that initially but if were are called from
tcp_output() with EMSGSIZE, we cleared the TSO flag on the tcpcb
there, called into tcp_mtudisc() and tcp_mss_update() which
then would reenable TSO on the tcpcb based on TSO capabilities
of the interface as learnt in tcp_maxmtu/6().
So if TSO was enabled on the (possibly new) outgoing interface
it was turned back on, which lead to an endless loop between
tcp_output() and tcp_mtudisc() until we overflew the stack.
Reported by: kmacy
MFC after: 2 months (along with r182851)
tcp_mss() and tcp_mss_update() so that tcp_mtudisc() could
re-use the same code.
In case we return early and got a metricptr to pass the hostcache
info back to the caller we need to initialize the data to a defined
state (zero it) as tcp_hc_get() would do if there was no hit.
Without that the caller would check on random stack garbage which
could lead to undefined results.
This only affected tcp_mss() if there was no routing entry for the peer,
tcp_mtudisc() was not affected.
MFC after: 2 months (along with r182851)
NATM needs 'struct in_addr' to compile, which is a problem on its own
but include in.h for now if we have NATM but neither INET or INET6.
MFC after: 2 months
the sc does not have 'an_have_rssimap' variable.
Add an ANCACHE check to poperly hide the case and make an(4)
compile without INET.
MFC after: 2 months
Because the TTY hooks interface was not finished when I imported the
MPSAFE TTY layer, I had to disconnect the snp(4) driver. This snp(4)
implementation has been sitting in my P4 branch for some time now.
Unfortunately it still doesn't use the same error handling as snp(4)
(returning codes through FIONREAD), but it should already be usable.
I'm committing this to SVN, hoping someone else could polish off its
rough edges. It's always better than having a broken driver sitting in
the tree.
To prevent it from compiling without INET and INET6 we should put
an explicit #error in there like we have in other files,
but not rely on an unused variable.
MFC after: 2 months
Note that these changes will not make the driver work on powerpc, but it should fix at least the i386/amd64 cases.
Obtained from: //depot/projects/usb/src/sys/dev/usb2/wlan/if_zyd2.c#20
Noticed by: jeli, ed
vnode in question does not need to be held. All the data structures used
during the name lookup are protected by the global name cache lock.
Instead, the caller merely needs to ensure a reference is held on the
vnode (such as vhold()) to keep it from being freed.
In the case of procfs' <pid>/file entry, grab the process lock while we
gain a new reference (via vhold()) on p_textvp to fully close races with
execve(2).
For the kern.proc.vmmap sysctl handler, use a shared vnode lock around
the call to VOP_GETATTR() rather than an exclusive lock.
MFC after: 1 month
flag. Specifically, if two threads race to create a dirhash for a
directory, then one might already have created a private dirhash
structure (and locked it) when it realizes the directory now has a
structure and tries to lock that one.
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
Also: Change the initialisation of the command string to a static
initialiser. Verify it against the output of umass.c when being sent a
command using 'camcontrol eject da0' to a Bulk-Only device.
This should make those devices work that need a SCSI eject command to
switch to modem mode (Novatel 950D and others).
chdir(), chroot(), eaccess(), fpathconf(), fstat(), fstatfs(), lseek()
(when figuring out the current size of the file in the SEEK_END case),
pathconf(), readlink(), and statfs() system calls.
Submitted by: ups (mostly)
Tested by: pho
MFC after: 1 month
Really, the concept of holdcnt in the struct mount is rappresented by
the mnt_ref (which prevents the type-stable structure from being
"recycled) handled through vfs_ref() and vfs_rel().
On this optic, switch the holdcnt acquisition into an emulated vfs_ref()
(and subsequent release into vfs_rel()).
Discussed with: kib
Tested by: pho
The smb library in userspace already knows how to deal with this type of
cloning.
This also corrects a leak in which the netsmb kernel module could not be
unloaded if device nodes had been stat'd but not open'd.
Discussed with: kib
and server. This replaces the RPC implementation of the NFS client and
server with the newer RPC implementation originally developed
(actually ported from the userland sunrpc code) to support the NFS
Lock Manager. I have tested this code extensively and I believe it is
stable and that performance is at least equal to the legacy RPC
implementation.
The NFS code currently contains support for both the new RPC
implementation and the older legacy implementation inherited from the
original NFS codebase. The default is to use the new implementation -
add the NFS_LEGACYRPC option to fall back to the old code. When I
merge this support back to RELENG_7, I will probably change this so
that users have to 'opt in' to get the new code.
To use RPCSEC_GSS on either client or server, you must build a kernel
which includes the KGSSAPI option and the crypto device. On the
userland side, you must build at least a new libc, mountd, mount_nfs
and gssd. You must install new versions of /etc/rc.d/gssd and
/etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf.
As long as gssd is running, you should be able to mount an NFS
filesystem from a server that requires RPCSEC_GSS authentication. The
mount itself can happen without any kerberos credentials but all
access to the filesystem will be denied unless the accessing user has
a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There
is currently no support for situations where the ticket file is in a
different place, such as when the user logged in via SSH and has
delegated credentials from that login. This restriction is also
present in Solaris and Linux. In theory, we could improve this in
future, possibly using Brooks Davis' implementation of variant
symlinks.
Supporting RPCSEC_GSS on a server is nearly as simple. You must create
service creds for the server in the form 'nfs/<fqdn>@<REALM>' and
install them in /etc/krb5.keytab. The standard heimdal utility ktutil
makes this fairly easy. After the service creds have been created, you
can add a '-sec=krb5' option to /etc/exports and restart both mountd
and nfsd.
The only other difference an administrator should notice is that nfsd
doesn't fork to create service threads any more. In normal operation,
there will be two nfsd processes, one in userland waiting for TCP
connections and one in the kernel handling requests. The latter
process will create as many kthreads as required - these should be
visible via 'top -H'. The code has some support for varying the number
of service threads according to load but initially at least, nfsd uses
a fixed number of threads according to the value supplied to its '-n'
option.
Sponsored by: Isilon Systems
MFC after: 1 month
allocating resources to read the CIS. I'm not sure when this changed,
but it is totally wrong. Also, add a minor improvement to the
debugging.
This should help everybody trying to run dumpcis on atheros wireless
card as well.
MFC after: 2 days
right... Good thing the size was ignored...
Where this macro is used, there's no reason to do it anyway. There
seems to have been some old-time confusion between the CIS pointer
definition, and the BAR definitions at the base of this bug.
compiled into the main AMR driver. It's code that is nice to have but not
required for normal operation, and it is reported to cause problems for some
people.
usable for newer CPUs. The new value allows 2 x quad core configuration
dumps to fit within the initial buffer without reallocations.
Approved by: gnn (mentor) (older version)
Pointed out by: rdivacky
dropping the connection when the requested service isn't available, or
we may try to release a lock that isn't locked.
This prevents an assertion failure when trying to mount a non-present
share using smbfs with INVARIANTS; a lock order reversal warning that
immediately follows is not yet fixed.
Reported by: attilio
MFC after: 3 days
For an unknown reason the touch pad of my PowerBook generates button 5
events when you operate it. This causes the adb_mouse code to convert
them to button 2 events, which is not what we want.
Add a new flag, AMS_TOUCHPAD, which is used to distinguish the touch
pad. When set, don't convert button events of unknown buttons to the
last button.
There are still three problems left with respect to user input:
- The mouse button events are not properly processed when the touch pad
isn't touched.
- The arrow keys on the keyboard don't work inside X11.
- The power button isn't handled by the kernel, similar to the ACPI
power button on i386/amd64.
Approved by: nwhitehorn
Make the ISA bus keep track of more PNP details. Plus a minor style
fix while I'm here. More could be done here, but except for some SBCs
that don't have ACPI, there's limited value to anybody in doing so.
use process ID as ACPI thread ID. Concurrent requests with equal thread
IDs broke ACPI mutexes operation causing unpredictable errors including
AE_AML_MUTEX_NOT_ACQUIRED that I have seen.
Use kernel thread ID instead of process ID for ACPI thread.
- Implement real draining for vfs consumers by not relying on the
mnt_lock and using instead a refcount in order to keep track of lock
requesters.
- Due to the change above, remove the mnt_lock lockmgr because it is now
useless.
- Due to the change above, vfs_busy() is no more linked to a lockmgr.
Change so its KPI by removing the interlock argument and defining 2 new
flags for it: MBF_NOWAIT which basically replaces the LK_NOWAIT of the
old version (which was unlinked from the lockmgr alredy) and
MBF_MNTLSTLOCK which provides the ability to drop the mountlist_mtx
once the mnt interlock is held (ability still desired by most consumers).
- The stub used into vfs_mount_destroy(), that allows to override the
mnt_ref if running for more than 3 seconds, make it totally useless.
Remove it as it was thought to work into older versions.
If a problem of "refcount held never going away" should appear, we will
need to fix properly instead than trust on such hackish solution.
- Fix a bug where returning (with an error) from dounmount() was still
leaving the MNTK_MWAIT flag on even if it the waiters were actually
woken up. Just a place in vfs_mount_destroy() is left because it is
going to recycle the structure in any case, so it doesn't matter.
- Remove the markercnt refcount as it is useless.
This patch modifies VFS ABI and breaks KPI for vfs_busy() so manpages and
__FreeBSD_version will be modified accordingly.
Discussed with: kib
Tested by: pho
a little refinement, but is good enough to commit as is.
# Should look to see if I should move swab(3) into the kernel or just
# provide the unoptimized routine here.
Reviewed by: marcel@
whatever template was used to create this driver. It is not
necessary, and wouldn't work anyway since (a) this device will never
be in a cardbus tin-can and (b) the driver isn't even PCI, but instead
a built-in NIC on the IDT RC32434 on its internal bus.
record queue, so move the offset field from the per-record
audit_pipe_entry structure to the audit_pipe structure.
Now that we support reading more than one record at a time, add a
new summary field to audit_pipe, ap_qbyteslen, which tracks the
total number of bytes present in a pipe, and return that (minus
the current offset) via FIONREAD and kqueue's data variable for
the pending byte count rather than the number of bytes remaining
in only the first record.
Add a number of asserts to confirm that these counts and offsets
following the expected rules.
MFC after: 2 months
Sponsored by: Apple, Inc.
We often run into these very high column numbers when we run curses
applications, because they don't print any newlines. This messes up the
table output of `pstat -t'. If these numbers get really high, they
aren't of any use to the reader anyway. Convert them to `99999' when
they run out of bounds.
One of the pieces of code that I had left alone during the development
of the MPSAFE TTY layer, was tty_cons.c. This file actually has two
different functions:
- It contains low-level console input/output routines (cnputc(), etc).
- It creates /dev/console and wraps all its cdevsw calls to the
appropriate TTY.
This commit reimplements the second set of functions by moving it
directly into the TTY layer. /dev/console is now a character device node
that's basically a regular TTY, but does a lookup of `si_drv1' each time
you open it. d_write has also been changed to call log_console().
d_close() is not present, because we must make sure we don't revoke the
TTY after writing a log message to it.
Even though I'm not convinced this is in line with the future directions
of our console code, it is a good move for now. It removes recursive
locking from the top half of the TTY layer. The previous implementation
called into the TTY layer with Giant held.
I'm renaming tty_cons.c to kern_cons.c now. The code hardly contains any
TTY related bits, so we'd better give it a less misleading name.
Tested by: Andrzej Tobola <ato iem pw edu pl>,
Carlos A.M. dos Santos <unixmania gmail com>,
Eygene Ryabinkin <rea-fbsd codelabs ru>
Right now ams_read() uses cv_wait() to wait for new data to arrive on
the mouse device. This means that when you run `cat /dev/ams0', it
cannot be interrupted directly. After you press ^C, you first need to
move the mouse before cat will quit. Make this function use
cv_wait_sig(), which allows it to be interrupted directly.
Reviewed by: nwhitehorn
cable tuning. This has helped in some installations for hardware
deployed by a former employer. Made optional because the lists aren't
full of complaints about these cards... even when they were wildly
popular.
Reviewed by: attilio@, jhb@, trhodes@ (all an older version of the patch)
read(2), which meant that records longer than the buffer passed to read(2)
were dropped. Instead take the approach of allowing partial reads to be
continued across multiple system calls more in the style of streaming
character device.
This means retaining a record on the per-pipe queue in a partially read
state, so maintain a current offset into the record. Keep the record on
the queue during a read, so add a new lock, ap_sx, to serialize removal
of records from the queue by either read(2) or ioctl(2) requesting a pipe
flush. Modify the kqueue handler to return bytes left in the current
record rather than simply the size of the current record.
It is now possible to use praudit, which used the standard FILE * buffer
sizes, to track much larger record sizes from /dev/auditpipe, such as
very long command lines to execve(2).
MFC after: 2 months
Sponsored by: Apple, Inc.
processes exits at the same time. The linux_emuldata structure is freed
but p->p_emuldata is left as a dangling pointer to the just freed memory.
The check for W_EXIT in the loop scanning the child processes isn't safe
since the state of the child process can change right afterwards. Lock
the process and check the W_EXIT before delivering signal.
Submitted by: tegge
Reviewed by: davidxu
MFC after: 1 week
within an object that a mapping refers to. fileid and fsid are inode/dev
for vnodes. (Linux procfs has these and valgrind is really unhappy
without them.) I believe I didn't change the size of the struct.
on G4 machines. On the assumption that most people using FreeBSD on Apple
hardware are not using serial consoles, set boot1's output to screen. This
should be revisited. While here, reduce verbosity of boot1.
pipe has overflowed, drop the newest, rather than oldest, record. This
makes overflow drop behavior consistent with memory allocation failure
leading to drop, avoids touching the consumer end of the queue from a
producer, and lowers the CPU overhead of dropping a record by dropping
before memory allocation and copying.
Obtained from: Apple, Inc.
MFC after: 2 months
protecting the list of audit pipes, and a per-pipe mutex protecting the
queue.
Likewise, replace the single global condition variable used to signal
delivery of a record to one or more pipes, and add a per-pipe condition
variable to avoid spurious wakeups when event subscriptions differ
across multiple pipes.
This slightly increases the cost of delivering to audit pipes, but should
reduce lock contention in the presence of multiple readers as only the
per-pipe lock is required to read from a pipe, as well as avoid
overheading when different pipes are used in different ways.
MFC after: 2 months
Sponsored by: Apple, Inc.
mutex, as it's rarely changed but frequently accessed read-only from
multiple threads, so a potentially significant source of contention.
MFC after: 1 month
Sponsored by: Apple, Inc.
capabilities reported by the ap. These need to be cross-checked
against the local configuration in the vap. Previously we were
only checking the ap capabilities which meant that if an ap reported
it was ff-capable but we were not setup to use them we'd try to do
ff aggregation and drop the frame.
There are a number of problems to be fixed here but applying this
fix immediately as the problem causes all traffic to stop (and has
not workaround).
Reported by: Ashish Shukla
access control checks in mac_bsdextended are not in the same
namespace as the MBI_ flags used in ugidfw policies, so add an
explicit conversion routine to get from one to the other.
Obtained from: TrustedBSD Project
sdhci supports up to 65535 blocks transfers, at91_mci - one block.
Enable multiblock operations disabled before to follow at91_mci driver
limitations.
Reviewed by: imp@
dump of detected ULE CPU topology. This dump can be used to check the
topology detection and for general system information.
An example of CPU topology dump is:
kern.sched.topology_spec: <groups>
<group level="1" cache-level="0">
<cpu count="8" mask="0xff">0, 1, 2, 3, 4, 5, 6, 7</cpu>
<flags></flags>
<children>
<group level="2" cache-level="0">
<cpu count="4" mask="0xf">0, 1, 2, 3</cpu>
<flags></flags>
</group>
<group level="2" cache-level="0">
<cpu count="4" mask="0xf0">4, 5, 6, 7</cpu>
<flags></flags>
</group>
</children>
</group>
</groups>
Reviewed by: jeff
Approved by: gnn (mentor)
while doing the block store workaround so we restore the correct
floating-point registers state in case of nested floating-point
operations resulting from nested interrupts. This allows the
VIS-based block copy/zero functions to be used on machines
requiring this workaround. Alternatively, we could take care of
saving the floating-point registers here, which would be more
inefficiently though and also involves turning off interrupts.
- It turns out that the SCZ_PCI_DMA_SYNC register doesn't work
like the TOMXMS_PCI_DMA_SYNC_PEND one (but more like the
corresponding register in of Hummingbird and Sabre bridges)
and writing the INO of the respective device to it causes a
Safari bus error. However, due to the Schizo errata I-23,
SCZ_PCI_DMA_SYNC can't be used as intended either, so remove
consistent DMA syncing for Schzio bridges for now, which means
that add-on cards with non-"sun4u compliant" (whatever that
means exactly) PCI-PCI-bridges should be avoided until the
proper workaround is implemented. [1]
Reported by: Michael Moll [1]
This should fix q_time overflow, which happens after 2^32/(86400*hz) days of
uptime (~50days for hz = 1000).
q_time overflow cause following:
- traffic shaping may not work in 'fast' mode (not enabled by default).
- incorrect average queue length calculation in RED/GRED algorithm.
NB: due to ABI change this change is not applicable to stable.
PR: kern/128401
to add more V* constants, and the variables changed by this patch were often
being assigned to mode_t variables, which is 16 bit.
Approved by: rwatson (mentor)
memory mappings when the MAC label on a process changes, to
mac_proc_vm_revoke(),
It now also acquires its own credential reference directly from the
affected process rather than accepting one passed by the the caller,
simplifying the API and consumer code.
Obtained from: TrustedBSD Project
vpollinfo with vnode interlock. Fully initialize vpollinfo before putting
pointer to it into vp->v_pollinfo.
Discussed with: dwhite
Tested by: pho
MFC after: 1 week
that they operate directly on credentials: mac_proc_create_swapper(),
mac_proc_create_init(), and mac_proc_associate_nfsd(). Update policies.
Obtained from: TrustedBSD Project
be a no-op request, and why this might have to change if we want to allow
leaving a partition someday.
Obtained from: TrustedBSD Project
MFC after: 3 days
"ticks" goes negative. This breaks the signed comparison in softclock.
This causes sleep() to never wake up, tcp to stop, etc etc. This is
bad(TM). Use the SEQ_LT() method from tcp's sequence number comparisons.
driver (rev 1.3), by Joerg Sonnenberger.
Note: This change is untested as I do not own the hardware. Let me know
if things work or do not work for you by sending me the output dmesg (and
usbctl -f /dev/usbX if possible). Thanks.
for the BCM5714 revision A0 when in a multi-port configuration
and unconditionally for the remainder of the class of BCM575X
and beyond chips.
This was prodded by mav and is based on a suggestion and a
patch submitted by jhb.
Reviewed by: jhb
MFC after: 2 months
V9 stack bias so we no longer need to add it in db_backtrace()
and stack_capture() respectively. This also reverts r182018,
which kludged around the resulting unaligned access.
- Sync the sun4v versions of db_trace.c and stack_machdep.c with
the sparc64 ones and fix some style bugs.
MFC after: 3 days
rs400/rs480 should clear the RADEON_BUS_MASTER_DIS bit. This should get
the rs485 IGP chips going again.
Approved by: jhb (mentor)
Obtained from: drm git master
making the use of sc_hwmap to do direct mapping impractical. Switch to
indexing by the rate index instead of the rate code and adjust associated
state and logic appropriately. This has several benefits including
simplification of the led code.
o fix radiotap capture of HT rates
o fix conditional compilation of HT radiotap support to be based on the
hal having 5416 support; not the ABI version as hal builds may or may
not include 5416 support
o update tx rssi data only when an ACK was received
o return tx rssi from sampled data instead of the last frame
o track noise floor
o return rx rssi and noise floor (was broken)
o pass country code, outdoor indication, and ecm mode into the hal
when requesting a channel list
o add a console msg when regulatory setup fails
o add placeholder code to map between Atheros sku's and 802.11 sku's
that handles only the debug country code used to unlock the full
channel list (to be used only for debugging)
o fix multiple instances of mismapping the 802.11 location to the
outdoor indication (anywhere may be outdoor also)
in sta and adhoc modes; this should've been done forever ago as most all
drivers use this hook to set per-station transmit parameters such as for
tx rate control
o adjust drivers to remove explicit calls to the driver newassoc method
a) Need for EEOR mode to take the min of the socket buffer size and the
add more threshold, otherwise if you are so silly as to set a send
buf size less than the add-more you could block forever in eeor mode.
b) We were incorrectly using the sysctl vs the calculated value. This
causes us to block forever if the addmore theshold is larger than
then the socket buffer size.
- If we send EXACTLY the size left in the send buffer
and then send again, we end up with exactly 0 bytes and
don't hit the pre-block code to wait for more space.
- If we fall into the loop with our max_len == 0 (the bug
above) we then call in to copy out the data, setup the length
of the waiting to transmit data to 0 and call the mbuf copy routine
which 0 indicates copy all the data to the mbuf chain.. which it
does. This then leaves a "stuck" message on the stream queue with
its size exactly 0 bytes but all the data there and thus nothing
left in the uio structure. We then reach a stuck forever state
never being able to send data.
control logic and policy registration remaining in that file, and access
control checks broken out into other files by class of check.
Obtained from: TrustedBSD Project
The cn_unit and cn_tp fields don't seem to be used anywhere. Some
drivers set them, while others don't. Just remove them, in an attempt to
make our consdev code a little easier to understand.
certain ATA-6 drives including CF cards.
The IDE geometry of the PC98 is calculated from the drive capacity.
In addition to the algorithm in NEC BIOS, a variety of algorithms are
provided by 3'rd party boards and BIOS hacks. This change has
implemented the three algorithms: IDE BIOS compatible mode, SCSI BIOS
compatible mode and same way as the previous version. The tunable
machdep.ad_geom_method selects the algorithm.
I have been using this change for a year with CF cards.
Reminded by: nyan
Due to the nature of the beast it causes lot of unproductive overhead. This
is especially bad when running SMP kernel on VMWare with several virtual
processors - idle FreeBSD guest with SMP kernel takes 150% host CPU time on my
dual-core MacBook Pro when I am enabling two virtual CPUs, making even host
not very usable. Detect when we are running in the sandbox and reduce HZ
to 10 (can be adjusted via VM_HZ in the kernel config) in such cases. This
brings host CPU usage of idle FreeBSD/SMP on two virtual processors down
to 10%.
Detect most popular VM platforms out there - VMWare, Parallels, VirtualBox
and VirtualPC.
MFC after: 2 weeks
to set the initial PIO mode instead of assuming PIO4. There are still a few
nagging issues:
- There are some problems with 64 K DMA transfers waiting on lower level
changes.
- ATAPI DMA is broken on Marcel's Mac Mini because we need an ATA SELECT hook
propagated up to individual drivers for hardware without timing registers for
each ATA channel.
fragment reassembly queues.
This allows policies to label reassembly queues, perform access
control checks when matching fragments to a queue, update a queue
label when fragments are matched, and label the resulting
reassembled datagram.
Obtained from: TrustedBSD Project
sooner to decomplicate locking and eliminate the need for a rather
chatty comment about why we have to handle the global lock in a
special way for the benefit of ipfw and pf cred rules.
MFC after: 3 days
(unless explicitly locked to mode 11b) so when we join the bss the
channel attached to the scan cache entry may need to be demoted.
o demote to 11b if the ap is advertising 11b rates
o skip the ap if it's 11b but we're locked to 11g (could consider this
advisory but for now treat it as mandatory)
o handle an odd edge case, if there is a fixed transmit rate for 11g
then the rate check against the 11b ap will fail, try to demote to
11b and retry the rate check
Reviewed by: sephe, thompsa
G3 as well as the internal ADB keyboard and mice in PowerBooks and iBooks. This
also brings in Mac GPIO support, for which we should eventually have a better
interface.
Obtained from: NetBSD (CUDA and PMU drivers)
- Consistently add parentheses to return statements.
- Use NULL instead of 0 when comparing pointers, also avoiding
unnecessary casts.
- Do not use pointers as booleans.
Reviewed by: rwatson (earlier version)
MFC after: 2 months
the net80211 layer has complete control over the handling of mgt frames
(in particular, the ac, tx rate, and retry count); this also allows us
to purge the M_LINK0 flag that was attached to mbufs to mark them as
needing encryption for shared key auth
o change ieee80211_send_setup to take a tid parameter so it can be used
to setup QoS frames
o correct BAR frame construction for AMPDU
o retransmit BAR frames until ACK'd or timeout (use tunables to
control behaviour, default is very aggressive)
o defer seq# update until BAR frame is ACK'd
o add BAR response handling callback for driver to interpose and
push new state to device or push pending aggregates
While here also:
o add backpointer to node in the per-tid tx aggregation data structure
o move ampdu tx state setup/teardown work to separate functions
o yank useless code for setting fixed rate through media opts: this
mechanism didn't scale to HT rates and couldn't handle multiple bands;
fixed tx rates are set with the IEEE80211_IOC_TXPARAMS ioctl
are possibly still being created. The d_secperunit field
contains the number of sectors of the disk and not of the
slice/partition to which the disklabel applies.
Rather than reject the disklabel, we now silently adjust
the field. Existing code, like bslabel(8), does not seem
to check the label that extensively and seems to adjust
fields as a side-effect as well.
In other words, it's not that important apparently, so
gpart should not be too strict about it.
Reported by: nyan@
Reported by: Andriy Gapon <avg@icyb.net.ua>
Olaf Kirch noticed that the i915_set_status_page() function of the i915
kernel driver calls ioremap with an address offset that is supplied by
userspace via ioctl. The function zeroes the mapped memory via memset
and tells the hardware about the address. Turns out that access to that
ioctl is not restricted to root so users could probably exploit that to
do nasty things. We haven't tried to write actual exploit code though.
It only affects the Intel G33 series and newer.
Approved by: bz (secteam)
Obtained from: Intel drm repo
Security: CVE-2008-3831
Memory Interface (CFI). The flash memory can be read and written
to through /dev/cfi# and an ioctl() exists so processes can read
the query information.
The driver supports the AMD and Intel command set, though only
the AMD command has been tested.
Obtained from: Juniper Networks, Inc.
established a valid link or not.
In rl_start_locked, don't try to send packets unless we have valid
link. While I'm here add a check that verifies whether driver can
accept Tx requests by inspecting IFF_DRV_OACTIVE/IFF_DRV_RUNNING
flag.
- The hardware does not support DAC so limit DMA address space to
4GB.
- Removed BUS_DMA_ALLOC_NOW flag.
- Created separated Tx buffer and Rx buffer DMA tags. Previously
it used to single DMA tag and it was not possible to specify
different DMA restrictions.
- Apply 4 bytes alignment limitation of Tx buffer.
- Apply 8 bytes alignment limitation of Rx buffer.
- Tx side bus_dmamap_load_mbuf_sg(9) support.
- Preallocate Tx DMA maps as creating DMA maps take very long time
on architectures that require real DMA maps.
- Adjust guard buffer size to 1522 + 8 as it should include VLAN
and additional reserved bytes in Rx buffer.
- Plug memory leak in device detach. Previously wrong buffer
address was used to free allocated memory.
- Added rl_list_rx_init() to clear Rx buffer and cleared the
buffer.
- Don't destroy DMA maps in rl_txeof() as the DMA map should be
reused. There is no reason to destroy/recreate the DMA maps in
this driver.
- Removed rl_dma_map_rxbuf()/rl_dma_map_txbuf() callbacks.
- The hardware does not support descriptor based DMA on Tx side
and the Tx buffer address should be aligned on 4 bytes boundary
as well as manual padding for short frames. Because of this
hardware limitation rl(4) always used to invoke m_defrag(9) to
get a 4 bytes aligned single buffer. However m_defrag(9) takes
a lot of CPU cycles on slow machines and not all packets need
the help of m_defrag(9). Armed with the information, don't
invoke m_defrag(9) if the following conditions are true.
1. Buffer is not fragmented.
2. Buffer is aligned on 4 bytes boundary.
3. Manual padding is not necessary.
4. Or padding is necessary but upper stack passed a writable
buffer and the space needed for padding is satisfied.
This change combined with preallocated DMA maps greatly
increased Tx performance of driver on sparc64.
- Moved bus_dmamap_sync(9) in rl_start_locked() to rl_encap() and
corrected memory synchronization operation specifier of
bus_dmamap_sync(9).
- Removed bus_dmamap_unload(9) in rl_stop(). There is no need to
reload/unload Rx buffer as rl(4) always have to copy from the
buffer. It just needs proper bus_dmamap_sync(9) calls before
copying the received frame.
With this change rl(4) should work on systems with more than 4GB
memory.
PR: kern/128143
with several points unappropriate for the present parser. This patch
disables input-to-output analog monitoring but instead fixes recording.
Tested by Tobias Grosser on ThinkPad T61p.
might make Qualcomm and Option cards (which have all endpoints in 1
interface) work.
- Change the USB buffer sizes to depend on the transfer speed. With UMTS
we use a buffer 384k / 1000 frames/sec * 50msecs =~ 15kB for example.
- Add a MODULE_VERSION statement
when thread is in kernel mode, it can cause dead loop, now unlock
process lock after acquired sleep queue lock and thread lock to
avoid the problem. This means TDF_NEEDSIGCHK and TDF_NEEDSUSPCHK must
be set with process lock and thread lock being hold at same time.
but I inadvertently overwrote the change when I synced to git. Commit
the fix in both places, so this doesn't happen again.
Approved by: jhb (mentor)
MFC after: 2 weeks
This update fixes a transmit bug in the multi-queue (MSI-X) firmware
which happens when RDMAs complete out of order, and provides
improved support for the new Myri10GE NIC models (10G-PCIE-8Bx)
Sponsored by: Myricom Inc.
MFC after:3 days
With our new TTY layer we use a two step device destruction procedure.
The TTY first gets abandoned by the device driver. When the TTY layer
notices all threads have left the TTY layer, it deallocates the TTY.
This means that the device unit number should not be reused before a
callback from the TTY layer to the device driver has been made. newbus
doesn't seem to support this concept (yet), so right now just add a
destructor with a big comment in it. It's not ideal, but at least it's
better than panicing.
Reported by: rnoland
unnecessary, the normal process lock and thread lock are enough. The
spin lock is still needed for process and thread exiting to mimic
single sched_lock.
machine arm
device mem
device uart_ns8250
options GEOM_BSD
options GEOM_MBR
Remove the first three from all kernel configuration files
(sometimes commented-out) and change geom_bsd and geom_mbr
from standard to optional.
machine arm
device mem
options GEOM_BSD
options GEOM_MBR
Remove the first two from all kernel configuration files and
change geom_bsd and geom_mbr from standard to optional.
rest in kern_getdirentries(). Use kern_getdirentries() to implement
freebsd32_getdirentries(). This fixes a bug where calls to getdirentries()
in 32-bit binaries would trash the 4 bytes after the 'long base' in
userland.
Submitted by: ups
MFC after: 1 week
Driver supports PCI devices with class 8 and subclass 5 according to
SD Host Controller Specification.
Update NOTES, enable module and static build.
Enable related mmc and mmcsd modules build.
Discussed on: mobile@, current@
other fixes:
- Add pointers back to device_t objects in softc structures instead
of storing the unit and using devclass_get_device().
- Add 'lpbb', 'pcf', 'pps', and 'vpo' child devices to every 'ppbus' device
instead of just the first one.
- Store softc pointers in si_drv1 of character devices instead of
pulling the unit number from the minor number and using
devclass_get_softc() and devclass_get_device().
- Store the LP_BYPASS flag in si_drv2 instead of encoding it in the minor
number.
- Destroy character devices for lpt(4) when detaching the device.
- Use bus_print_child_footer() instead of duplicating it in
ppbus_print_child() and fix ppbus_print_child()'s return value.
- Remove unused AVM ivar from ppbus.
- Don't store the 'mode' ivar in the ppbus ivars since we always fetch it
from the parent anyway.
- Try to detach all the child devices before deleting them in
ppbus_detach().
- Use pause() instead of a tsleep() on a dummy address when polling the
ppbus.
- Use if_printf() and device_printf() instead of explicit names with unit
numbers.
Silence on: current@
but is not used anymore. This define is not referenced by anything
in the FreeBSD srcs nor google shows any usage. Kernel and world
builds fine without it.
Approved by: kib (mentor)
- If there aren't spinlocks held, but there are problems with old
sleeplocks, they are not reported.
- If the spinlock found is not the only one, problems are not reported.
Fix these 2 problems.
Reported by: tegge
already (but probably had been way above as the code was there twice)
and describe what was last changed in rev. 1.199 there (which now is
in sync with in6_src.c r184096).
Pointed at by: mlaier
MFC after: 2 mmonths
ephemeral port allocation as implemented in netinet/in_pcb.c rev. 1.143
(initially from OpenBSD) and follow-up commits during the last four and
a half years including rev. 1.157, 1.162 and 1.199.
This now is relying on the same infrastructure as has been implemented
in in_pcb.c since rev. 1.199.
Reviewed by: silby, rpaulo, mlaier
MFC after: 2 months
and ffs_lock. This cannot catch situations where holdcnt is incremented
not by curthread, but I think it is useful.
Reviewed by: tegge, attilio
Tested by: pho
MFC after: 2 weeks
MNTK_UNMOUNT before, and mnt_mtx is used as interlock. vfs_busy() always
tries to obtain a shared lock on mnt_lock, the other user is unmount who
tries to drain it, setting MNTK_UNMOUNT before.
Reviewed by: tegge, attilio
Tested by: pho
MFC after: 2 weeks
Export the active and bootable flags as attributes in
the configuration XML and allow them to be manipulated
with the set/unset commands.
Since libdisk treats the flags as part of the partition
type, preserve behavior by keeping them included in the
configuration text.
realtimer_expire() to not rearm the timer, otherwise there is a chance
that a callout will be left there and be tiggered in future unexpectly.
Bug reported by: tegge@
not the string formatted at the time of CTRX() call. Stack_ktr(9) uses
an on-stack buffer for the symbol name, that is supplied as an argument
to ktr. As result, stack_ktr() traces show garbage or cause page faults.
Fix stack_ktr() by using pointer to module symbol table that is supposed
to have a longer lifetime.
Tested by: pho
MFC after: 1 week
It is required for async cancellation to work.
Fix PROC_LOCK leak in linux_tgkill when signal delivery attempt is made
to not linux process.
Do not call em_find(p, ...) with p unlocked.
Move common code for linux_tkill() and linux_tgkill() into
linux_do_tkill().
Change linux siginfo_t definition to match actual linux one. Extend
uid fields to 4 bytes from 2. The extension does not change structure
layout and is binary compatible with previous definition, because i386
is little endian, and each uid field has 2 byte padding after it.
Reported by: Nicolas Joly <njoly pasteur fr>
Submitted by: dchangin
MFC after: 1 month
- fix bugs where we would:
- try to map the hypervisors address space
- accidentally kick out an existing kernel mapping for some domain creation memory allocation sizes
- accidentally skip a 2MB kernel mapping for some domain creation memory allocation sizes
- don't rely on trapping in to xen to read rcr2, reference through vcpu
- whitespace cleanups
Erase operation gives card's logic information about unused areas to help it
implement wear-leveling with lower overhead comparing to usual writing.
Erase is much faster then write and does not depends on data bus speed.
Also as result of hitting in-card write logic optimizations I have measured
up to 50% performance boost on writing undersized blocks into preerased areas.
At the same time there are strict limitations on size and allignment of erase
operations. We can erase only blocks aligned to the erase sector size and
with size multiple of it. Different cards has different erase sector size
which usually varies from 64KB to 4MB. SD cards actually allow to erase
smaller blocks, but it is much more expensive as it is implemented via
read-erase-write sequence and so not sutable for the BIO_DELETE purposes.
Reviewed by: imp@
be given when the user has enabled it). (Michael Tuexen)
- Sack Immediately was not being set properly on the actual chunk, it
was only put in the rcvd_flags which is incorrect. (Michael Tuexen)
- added an ifndef userspace to one of the already present macro's for
inet (Brad Penoff)
Obtained from: Michael Tuexen and Brad Penoff
MFC after: 4 weeks
credentials from inp_cred which is also available after the
socket is gone.
Switch cr_canseesocket consumers to cr_canseeinpcb.
This removes an extra acquisition of the socket lock.
Reviewed by: rwatson
MFC after: 3 months (set timer; decide then)
(still a power of 2) rather than 63k transfers. Even with 63k transfers
some machines (such as Dell SC1435's) were experiencing chronic data
corruption.
- Use the MIO method to talk to the Serverworks HT1000_S1 SATA controller
like all the other SATA controllers rather than the compat PATA
method. This lets the controller see all 4 SATA ports and also
matches the behavior of the Linux driver.
Silence from: sos
MFC after: 3 days
