Brad Warren
1f258449a4
Release 0.19.0
2017-10-04 12:11:20 -07:00
Seong-ho Cho
f6be07da74
fix #5111 AttributeError occured with >=pyOpenSSL-17.2.0 ( #5112 )
2017-09-15 16:57:10 -07:00
Brad Warren
6988491b67
Merge pull request #5080 from certbot/candidate-0.18.0
...
Release 0.18.0
2017-09-07 05:57:12 -07:00
Brad Warren
a7267b0fcd
Bump version to 0.19.0
2017-09-05 16:07:03 -07:00
Brad Warren
756c44f7af
Release 0.18.0
2017-09-05 16:06:43 -07:00
Brad Warren
d710c441e2
Specify the minimum six version in acme
2017-09-05 10:07:32 -07:00
Bob Strecansky
a8e1df6e55
[ #4535 ] - Unwrap max retries exceeded errors
2017-08-07 20:15:05 -04:00
Bob Strecansky
b3216727da
[ #4535 ] - Unwrap max retries exceeded errors
2017-08-07 19:34:20 -04:00
Bob Strecansky
8a78ef9675
[ #4535 ] - Unwrap max retries exceeded errors
2017-08-07 15:33:01 -04:00
Bob Strecansky
2e7ec00e8c
[ #4535 ] - Unwrap max retries exceeded errors
2017-08-07 08:55:43 -04:00
Bob Strecansky
f7dedae388
[ #4535 ] - Unwrap max retries exceeded errors
2017-08-07 08:39:39 -04:00
Bob Strecansky
9ae987d72b
[ #4535 ] - Unwrap max retries exceeded errors
2017-08-07 08:35:00 -04:00
Bob Strecansky
0c14d9372d
Merge branch 'master' of github.com:certbot/certbot into max_retries_exceeded
2017-08-07 08:14:54 -04:00
Bob Strecansky
9b8c8f103e
[ #4535 ] - Unwrap max retries exceeded errors
2017-08-06 23:44:28 -04:00
Bob Strecansky
8555f4a0bd
[ #4535 ] - Unwrap max retries exceeded errors
2017-08-06 23:30:11 -04:00
Bob Strecansky
521f783020
[ #4535 ] - Unwrap max retries exceeded errors
2017-08-06 23:02:07 -04:00
Bob Strecansky
5fb1568b6e
[ #4535 ] - Unwrap max retries exceeded errors
2017-08-06 22:26:17 -04:00
Bob Strecansky
57e664077f
[ #4535 ] - Unwrap max retries exceeded errors - fixing spacing
2017-08-06 10:51:10 -04:00
Bob Strecansky
880c35f3e3
[ #4535 ] - Unwrap max retries exceeded errors
2017-08-05 10:39:04 -04:00
Bob Strecansky
3cc94798b6
[ #4535 ] - Unwrap max retries exceeded errors
2017-08-05 10:26:01 -04:00
Bob Strecansky
959d72feb0
[ #4535 ] - Unwrap max retries exceeded errors
2017-08-05 10:16:47 -04:00
Bob Strecansky
1e71ff5377
[ #4535 ] - Unwrap max retries exceeded errors
2017-08-02 22:59:27 -04:00
Brad Warren
744c993040
Bump version to 0.18.0
2017-08-01 17:01:19 -07:00
Brad Warren
912d235466
Release 0.17.0
2017-08-01 17:01:07 -07:00
Bob Strecansky
18d3df78e8
[ #4535 ] - Unwrap max retries exceeded errors
2017-07-26 20:37:13 -04:00
Jacob Hoffman-Andrews
b3004fe6cf
Handle critical SAN extension. ( #4931 )
...
* Handle critical SAN extension.
* Add testdata/critical-san.pem.
2017-07-18 15:57:00 -07:00
yomna
bc3765d6d0
No longer mask failed challenge errors with encoding errors ( #4867 )
...
* no longer masker failed challenge errors with encoding errors
* simplifying through type-checking
* bytes
2017-07-10 21:05:52 -05:00
ohemorange
57e56cc97b
Candidate 0.16.0 ( #4908 )
...
* Release 0.16.0
* Bump version to 0.17.0
2017-07-06 15:57:11 -07:00
Brad Warren
5318945267
Hide exceptions that occur during session.close() ( #4891 )
...
* Hide exceptions that occur during session.close()
This fixes #4840 . Exceptions that are raised out of __del__ methods are caught
and printed to stderr. By catching any exceptions that occur, we now prevent
this from happening.
Alternative solutions to this would have been either not calling
session.close() at all or adding a close() method to acme.client.ClientNetwork,
acme.client.Client, and certbot.client.Client and using certbot.client.Client
in a context manager to ensure close() is called. The former means that users
of the ACME library never properly close their connections until their program
exits and the latter adds a lot of complexity and nesting of client code for
little benefit.
* Only catch Exceptions
2017-07-05 09:25:44 -04:00
Brad Warren
f4094e4d3f
Finish oldest tests ( #4857 )
...
* Pin oldest version of packaged python deps
* Install security extras in oldest tests
* Revert "bump requests requirement to >=2.10 (#4248 )"
This reverts commit 402ad8b353
2017-06-23 09:40:59 -07:00
Brad Warren
0aab244846
Bump version to 0.16.0
2017-06-08 09:32:57 -07:00
Brad Warren
74acd1ee5a
Release 0.15.0
2017-06-08 09:32:41 -07:00
ohemorange
239184882e
Enable IPv6 support in standalone plugin ( #4773 )
...
* add TLSSNI01DualNetworkedServers
* use DualNetworkedServers in certbot/plugins/standalone.py
also, make both servers run on the same port.
* make probe_sni connect on ipv6 and ipv4 using None
* mimic BSD-like conditions to get test coverage
* test ServerManager taking into account BSD systems
* pass tests even if python is compiled without ipv6 support
2017-06-06 17:04:45 -07:00
Schuyler Duveen
7531c98916
fixes #3616 : make sure there is always one time that we test the sock… ( #4712 )
2017-06-06 10:11:33 -07:00
Jacob Hoffman-Andrews
10bac107ee
Add an account deactivate utility script. ( #4254 )
...
* Add an account deactivate utility script.
This is handy if you created an account with a tool other than Certbot, and want
to deactivate the account.
* Move deactivate.py to tools.
* Add test for ConflictError.
* Fix lint error.
* Document how to set server.
2017-05-17 14:24:59 -07:00
Jacob Hoffman-Andrews
686f5d6c81
Move 'jwk' and 'alg' fields to protected header. ( #4677 )
...
* Move 'jwk' and 'alg' fields to protected header.
Previously, these were in the unprotected JWS header, which Boulder currently
allows. However, the next version of the spec doesn't allow anything in the
unprotected header. Moving these fields now allows server implementers who are
implementing the Certbot/Boulder version of ACME
(https://github.com/letsencrypt/boulder/blob/master/docs/acme-divergences.md ) to
use JOSE libraries that don't support unprotected headers.
Fixes #4417 .
* Only protect existing headers.
2017-05-17 13:46:52 -07:00
Brad Warren
2754a2d0ae
Bump version to 0.15.0
2017-05-04 16:52:29 -07:00
Brad Warren
4be7efbf74
Release 0.14.0
2017-05-04 16:52:13 -07:00
Brad Warren
5ca8f7c5b9
Add lockfile ( #4449 )
...
* add lock_file
* cleanup lock file
* Add LockFile tests
* add lock_dir
* add lock_dir_until_exit
* add set_up_core_dir and move lock_dir_until_exit
* Move lock_and_call to certbot.test.util
* Add lock to Apache
* Add lock to the Nginx plugin
* Improve permissions error message
* sort plugins
* add test_prepare_order
* provide more actionable permissions error
* Document and catch use of OSError
* don't lock a directory twice
* add conditional dependency on ordereddict
* Add lock_test
* expand sorted plugins comment
* Add lock_test to lint
* make make_lineage more conventional and flexible
* enhance lock_test.py
* add lock_test to tox
* Readd success message
* make py26 happy
* add test_acquire_without_deletion
2017-05-01 14:49:12 -07:00
Brad Warren
8fa12bef8e
Tell the world we're Python 3 compatible ( #4568 )
...
* Mention python 3 support in setup.py
* Build universal (py2 and py3 compatible) wheels
* Mention Python 3.3+ support in docs
* we work on python 3.6 too
2017-04-28 16:06:45 -07:00
Brad Warren
89af460792
Reuse dynamic install_requires. ( #4554 )
...
* Revert "Make argparse dependency unconditional. (#2249 )"
This reverts commit 8f10103496
2017-04-28 15:03:50 -07:00
Jacob Hoffman-Andrews
b3116af5b4
Add url and kid to jws. ( #4340 )
...
* Add url and kid to jws.
This will be required in order to implement the latest ACME spec, which uses
these protected header fields.
* Add comments and fix lint.
* Enforce mutual exclusivity of jwk and kid.
2017-04-21 18:49:57 -07:00
Jacob Hoffman-Andrews
d557c39c99
Remove obsolete fields from Registration. ( #4339 )
...
Authorizations and certificates were in the original spec but have since been
deleted.
2017-04-07 09:52:12 -07:00
Ngo The Trung
315b6d0cf1
Fix unorderable types error ( #4409 )
...
If the updated datetime collides, the comparator of heapq will move
onto the AuthorizationResource value and throws an "unorderable type"
error.
This adds an index value to the element tuple to ensure that they are
always strictly ordered.
2017-04-07 09:46:27 -07:00
Jacob Hoffman-Andrews
cacee80c51
Move make_csr into acme.crypto_util ( #4165 )
...
It's relatively finicky to make a CSR appropriate to pass to poll_and_request_issuance. I think most users want to be able to give a list of domains and a private key, and get back a CSR. This branch adds that functionality to crypto_util.
Note that the two new functions take arguments, and return values, as PEM-encoded buffers. This is a departure from some existing ACME interfaces that take PyOpenSSL types. I've discussed with the Certbot team, and we agree that this is broadly the direction the ACME API should take, so that users of the module don't need to import PyOpenSSL themselves, or use its primitives.
* Add make_csr.
* accept privkey
* Tweak API.
* Remove make_csr from certbot package.
* Skip test in older Pythons.
* Move get_Extensions call under protection.
* Remove assertIn because not backwards-compatible.
* Fix encoding, and use PEM.
* Fix test
* Fix tests on py35.
* Fix error in test.
* Make import_csr_file always return PEM.
Also delete get_sans_from_csr (unused) and get_names_from_csr (newly unused).
* Fix function doc.
* Fix indent
* Fix call of obtain_certificate_from_Csr
* lint
* Handle review feedback.
* Fix test.
2017-04-07 09:43:33 -07:00
Erica Portnoy
82f3f7523e
Candidate 0.13.0 ( #4475 )
...
* Release 0.13.0
* Bump version to 0.14.0
2017-04-06 11:33:32 -07:00
Damien Tournoud
5c93ceb675
acme: Make the network timeout configurable ( #4237 )
...
This follows up on https://github.com/certbot/certbot/pull/4217 , but allows users to override the default setting.
2017-03-27 09:24:05 -07:00
dokazaki
8011fb2879
Add mypy ( #4386 )
...
* Initial configuration of mypy in box, correction of base mypy errors.
* Move mypy install to toe
* Add pylint comments for typing imports.
* Remove typing module for Python 2.6 compatibility.
2017-03-18 19:10:10 -07:00
Jacob Hoffman-Andrews
018a304cd6
Remove Link rel=next for authzs and new-certs. ( #4303 )
...
An early version of the spec indicated that clients should process issuance
sequentially, following Link rel=next from an account URL to an authz URL, to a
new-cert URL. However, the spec has long since moved to putting these URLs in
the directory.
Certbot nominally supports either; This change consolidates on always using the
directory, simplifying things and making the transition to the latest ACME spec
easier.
* Revert "Revert "Remove Link rel=next for authzs and new-certs." (#4277 )"
This reverts commit 11ec1eb911
2017-03-14 21:44:57 -07:00
Brad Warren
662c323b55
Build wheels correctly for Python 2.6 ( #4313 )
...
* stop conditionally pinning mock version in acme
* stop conditionally pinning mock version in certbot
* stop conditionally pinning mock version in apache
* stop conditionally pinning mock version in nginx
* stop conditionally pinning mock version in letshelp
* stop conditionally pinning mock version in compatibility-test
2017-03-10 10:58:03 -08:00
Erik Rose
8f10103496
Make argparse dependency unconditional. ( #2249 )
...
The primary motivation is to avoid a branch, giving bugs one fewer place to hide. But, as a bonus, more people get a more bugfixed version of argparse. (To use the example from the argparse docs, people stuck on Python 3.2.3 can get bugfixes that made it into the stdlib only in 3.2.4.)
2017-03-08 17:10:12 -08:00
Blake Griffith
12a6e49cf1
Remove use of sha1 ( #4271 )
...
These are not security critical uses of sha1 but they should still be removed.
2017-03-02 21:16:19 -08:00
Jacob Hoffman-Andrews
53117b0ce0
Remove UnexpectedUpdate exceptions. ( #4197 )
...
* Remove UnexpectedUpdate exceptions.
These exceptions trigger when the server sends the client back an object with a
field that doesn't exactly match what the client previously sent.
This causes unnecessary breakage in various cases, doesn't prevent any problems,
and isn't required by spec.
* Back out all UnexpectedUpdate removals except registration update.
2017-03-02 17:27:29 -08:00
Erica Portnoy
5e671682ca
Candidate 0.12.0 ( #4286 )
...
* Release 0.12.0
* Bump version to 0.13.0
2017-03-02 15:26:24 -08:00
Brad Warren
11ec1eb911
Revert "Remove Link rel=next for authzs and new-certs." ( #4277 )
2017-03-02 10:31:15 -08:00
Damien Tournoud
44a6ec29c5
Fix direct usages of the root logger ( #4236 )
...
Some code uses `logging.debug` and `logging.info` instead of
the file-specific logger in `logger.debug` and `logger.info`.
2017-02-27 18:13:06 -08:00
Brad Warren
402ad8b353
bump requests requirement to >=2.10 ( #4248 )
2017-02-27 17:17:08 -08:00
Jacob Hoffman-Andrews
a92ca8e97c
Add default timeout to ClientNetwork. ( #4217 )
...
In https://community.letsencrypt.org/t/letsencrypt-cli-hangs-on-certificate-request/27211 ,
a community member pointed out that Certbot seems to hang when there are
routing problems.
2017-02-22 18:48:01 -08:00
Jacob Hoffman-Andrews
1380e59f56
Remove Link rel=next for authzs and new-certs. ( #4194 )
...
An early version of the spec indicated that clients should process issuance
sequentially, following Link rel=next from an account URL to an authz URL, to a
new-cert URL. However, the spec has long since moved to putting these URLs in
the directory.
Certbot nominally supports either; This change consolidates on always using the
directory, simplifying things and making the transition to the latest ACME spec
easier.
2017-02-13 19:50:33 -08:00
Brad Warren
a6b51f1edd
Bump version to 0.12.0
2017-02-01 09:50:57 -08:00
Brad Warren
30bc68ccde
Release 0.11.0
2017-02-01 09:50:42 -08:00
Brad Warren
be5bcfe463
Remove optional dependencies ( #4088 )
...
* Stop using already_listening in standalone
* remove already_listening
* remove psutil entirely
* fix #595
* Add basic perform test
* make pep8 happy
* Add test_perform_eacces
* add _setup_perform_error
* Add test_perform_unexpected_socket_error
* add test_perform_eaddrinuse_no_retry
* add test_perform_eaddrinuse_retry
* cleanup tests
* stop using dnspython
* don't install dns extras in tox
* remove dns extras from setup.py
* Add simple_verify back to DNS response
* remove dnspython from oldest tests
2017-01-30 16:55:54 -08:00
Brad Warren
240438eec7
Incorporate feedback from 4113 ( #4115 )
2017-01-30 09:44:55 -08:00
Josh Soref
6a39a42f45
Spelling ( #4101 )
...
* spelling: action
* spelling: artifacts
* spelling: asymmetric
* spelling: attempts
* spelling: bizarre
* spelling: certbot
* spelling: certificate
* spelling: certainly
* spelling: challenge
* spelling: client
* spelling: collated
* spelling: correct
* spelling: considered
* spelling: custom
* spelling: distinguish
* spelling: encoding
* spelling: enhancement
* spelling: equivalent
* spelling: execution
* spelling: existence
* spelling: failed
* spelling: handshake
* spelling: hyphen
* spelling: initialized
* spelling: initialization
* spelling: interpretation
* spelling: letsencrypt
* spelling: multiline
* spelling: multipart
* spelling: necessary
* spelling: otherwise
* spelling: output
* spelling: overridden
* spelling: positives
* spelling: preferable
* spelling: progress
* spelling: recommended
* spelling: referring
* spelling: relativity
* spelling: request
* spelling: requiring
* spelling: separate
* spelling: source
* spelling: specified
* spelling: standard
* spelling: successfully
* spelling: unparseable
* spelling: useful
2017-01-26 16:21:54 -08:00
Brad Warren
c650c9a709
add test_post_successful_retry
2017-01-25 15:10:24 -08:00
Brad Warren
46d9809fa1
add test_post_failed_retry
2017-01-25 15:08:01 -08:00
Brad Warren
a5da551965
fix stylistic nits with POST retry
2017-01-25 14:10:19 -08:00
Frederic BLANC
b6fecca7ba
fixes #2244
2017-01-25 13:38:00 -08:00
Brad Warren
bb669528b3
Remove old references to pep8 in our code ( #4073 )
2017-01-19 11:21:25 -08:00
Blake Griffith
49d46ef99a
Impelment account deactivation [revision requested] ( #3571 )
...
Impelment account deactivation
2017-01-17 16:00:07 -08:00
Peter Eckersley
796220f6f1
Adopt consistent linting practices for the entire tree ( #3843 )
...
* Use the certbot pylintrc for the ACME module
* Further parallelise lint, and don't run PEP8 checks
2017-01-17 12:53:13 -08:00
Craig Smith
94c23479e2
Add option to specify revocation reason ( #3242 ) ( #3988 )
...
This includes two new tests in the integration test script to check that
boulder gets the correct code. The encoding is specified in RFC5280
5.3.1. The codes that boulder will accept are a subset of that,
specified in `boulder.revocation.reasons.go`.
2017-01-11 18:26:55 -08:00
Brad Warren
364a6d8a2d
Release 0.10.0 ( #4022 )
...
* Release 0.10.0
* Bump version to 0.11.0
2017-01-11 12:01:33 -08:00
Ondřej Surý
379807bf0d
Add workaround for platforms where injecting pyopenssl to urllib3 ( #3990 )
...
fails with requests package (Ubuntu Trusty)
2017-01-10 11:39:40 -08:00
Peter Eckersley
59c602d9ca
Parallalelise nosetests from tox ( #3836 )
...
* Parallalelise nosetests from tox
* Parallelise even more things, break even more things
* Now unbreak all the tests that aren't ready for ||ism
* Try to pass tests!
- Remove non-working hack in reporter_test
- also be selective about ||ism in the cover environment
* Try again
* certbot-apache tests also work, given enough time
* Nginx may need more time in Travis's cloud
* Unbreak reporter_test under ||ism
* More timeout
* Working again?
* This goes way faster
* Another big win
* Split a couple more large test suites
* A last improvement
* More ||ism!
* ||ise lint too
* Allow nosetests to figure out how many cores to use
* simplify merge
* Mark the new CLI tests as ||izable
* Simplify reporter_test changes
* Rationalise ||ism flags
* Re-up coverage
* Clean up reporter tests
* Stop modifying testdata during tests
* remove unused os
2016-12-06 20:39:16 -08:00
Peter Eckersley
8b67a58f3c
Ensure tests pass with openssl 1.1 ( #3827 )
...
* Ensure tests pass with openssl 1.1
A bunch of the acme.standalone and acme.crypto_util tests were using
weak crypto that is now prohibited :/
* lint
* lintlint
* Fix symlink
2016-12-02 15:11:35 -08:00
Brad Warren
edbb3a73c6
Take advantage of urllib3 pyopenssl rewrite ( #3805 )
...
* pin requests version in py26-oldest
* Determine requests security deps dynamically
Starting with requests 2.12, pyasn1 and ndg-httpsclient are no longer
needed to inject pyopenssl into urllib3. This change allows us to
determine whether or not these dependencies are required at install
time. If an older version of requests is used, these packages are
still installed. If a new version of requests is used, they are not
reducing the number of dependencies we have.
* Bump requests version in certbot-auto
* Use pkg_resources in activate test
Due to pip's lack of dependency resolution, the change to use
requests[extras] causes errors in acme.util_test because pkg_resources
accurately detects the "missing" dependency.
There isn't a real problem here. The problem comes from a brand new
requests and ancient pyopenssl as well as a unit test for
functionality we plan to remove in our next release. I modified
the unit test to fix the problem for now.
* Use six instead of pkg_resources for test
* Require requests<=2.11.1 in py27-oldest test
If we don't do this, we get test failures for the certbot package
which is actually a good thing! pkg_resources is catching the
unlikely but possible problem I describe in #3803 and erroring out
saying it is missing the necessary dependencies to run certbot.
Good job package resources.
* Undo changes to acme.util_test
2016-12-01 10:47:08 -08:00
Peter Eckersley
0956e61c7c
Remove the sphinxcontrib.programout [docs]dependency ( #3830 )
...
- By making a static text file at release time, and including that
instead.
2016-11-30 10:47:10 -08:00
Jacob Hoffman-Andrews
88076e46c7
Improve debug logs. ( #3126 )
...
Print request and response bodies with newlines, rather than all on one line.
Remove "Omitted empty field" log, which gets logged meaninglessly for every JSON
serialization.
Remove duplicated logging of responses.
Log the base64 version of the nonce, rather than turning it into bytes and
logging the backslash-escaped version of those bytes.
Only pass -vv in tests.
2016-10-26 18:07:33 -07:00
Blake Griffith
7773568332
Update ACME error namespace to match the new draft. ( #3469 )
...
* Update error namespace in acme package.
* Use new error namespace in certbot.
* fix lint and py26 errors.
* Update with_code docstring.
* @pde's suggestions
2016-10-12 14:46:02 -07:00
Brad Warren
f5bf66ba36
Check version requirements on optional dependencies ( #3618 )
...
* Add and test activate function to acme.
This function can be used to check if our optional dependencies are
available and they meet our version requirements.
* use activate in dns_resolver
* use activate in dns_available() in challenges_test
* Use activate in dns_resolver_test
* Use activate in certbot.plugins.util_test
* Use acme.util.activate for psutil
* Better testing and handling of missing deps
* Factored out *_available() code into a common function
* Delayed exception caused from using acme.dns_resolver without
dnspython until the function is called. This makes both
production and testing code simpler.
* Make a common subclass for already_listening tests
* Simplify mocking of USE_PSUTIL in tests
2016-10-11 17:50:11 -07:00
Blake Griffith
dcb3fb7382
Use correct Content-Types in headers. ( #3566 )
...
* Add Content-Type: app/jose+json to post requests.
* Add tests for proper content type.
2016-10-05 12:28:38 -07:00
Brad Warren
76a92d4cde
Release Certbot 0.9.0 ( #3583 )
...
* Release 0.9.0
* Bump version to 0.10.0
2016-10-05 10:13:28 -07:00
Brad Warren
da22e64563
Allow tests to pass without dnspython ( #3581 )
...
* move skipUnless to test_util
* add skip_unless to acme test_util
* Make dns_resolver_tests work with and without dnspython
* make acme.challenges_test pass when dns is unavailable
2016-10-04 16:49:51 -07:00
Peter Eckersley
1584ee8ac6
Merge pull request #3466 from certbot/all-together-now
...
DNS challenge support in the manual plugin and general purpose --preferred-challenges flag
2016-09-22 14:15:25 -07:00
Brad Warren
7b7477ab94
Merge branch 'prettify' into all-together-now
2016-08-29 15:20:00 -07:00
Roland Shoemaker
349c2c5915
Switch out error message
2016-08-29 12:04:27 -07:00
Roland Shoemaker
5115e6ac2f
Support both invalidEmail and invalidContact errors
2016-08-26 16:17:19 -07:00
Jacob Hoffman-Andrews
2c411056fa
Remove obsolete test.
2016-08-19 11:54:35 -07:00
Jacob Hoffman-Andrews
20f9f5ce45
Merge branch 'master' of github.com:certbot/certbot into remove-unnecessary
2016-08-19 10:09:39 -07:00
Mathieu Leduc-Hamel
9958a7fc1c
Handle missing dnspython by displaying a warning message
2016-08-18 21:41:33 -04:00
Wilfried Teiken
b2505b996f
Switch to always using dnspython (requires dnspthon>=1.12).
...
Also, address some documentation nits.
2016-07-31 20:36:00 -04:00
Wilfried Teiken
827c93510c
Merge branch 'add_dns01_challenge' of github.com:wteiken/letsencrypt into add_dns01_challenge
2016-07-31 20:13:36 -04:00
Ville Skyttä
c7b89c334b
Use logger.warning instead of deprecated warn
2016-07-22 09:54:28 +03:00
Peter Eckersley
24cc6b208a
Avoid newline
2016-06-22 15:24:33 -07:00
Peter Eckersley
56488b1899
Explain the most likely cause of a missing replay nonce error
2016-06-20 18:18:25 -07:00
Peter Eckersley
b53b47c5d7
Merge pull request #3125 from certbot/lint-lint
...
Improve user experience for linting.
2016-06-13 14:22:11 -07:00
Jacob Hoffman-Andrews
4f2a8f86d8
Remove unnecessary check on registration returned.
...
Right now the ACME client checks that the returned registration matches the
registation posted, but there's no guarantee this will always be the case, and
this only introduces unnecessary fragility.
2016-06-13 11:52:36 -07:00
Jacob Hoffman-Andrews
91cd19158e
Improve user experience for linting.
...
Don't run pep8 for directories that we don't actually enforce pep8 on.
Install dependencies with -q.
Don't print reports, they make it hard to find the actual errors.
Remove deprecated fields from acme .pylintrc, they cause unnecessary messages
about deprecation.
2016-06-04 22:53:51 -07:00
Brad Warren
36e63a7372
Bump version to 0.9.0
2016-06-02 13:50:37 -07:00
Brad Warren
dcadcf8d42
Release 0.8.0
2016-06-02 13:50:30 -07:00
bmw
590d816fa9
s/assert_called_once/assert_called_once_with ( #3100 )
2016-05-31 16:03:42 -07:00
Brad Warren
7153220b41
Bump version to 0.8.0
2016-05-27 13:30:54 -07:00
Brad Warren
46d8f6e18c
Release 0.7.0
2016-05-27 13:30:46 -07:00
bmw
e01878a813
Merge pull request #3034 from chbrown/patch-1
...
Typo: too many self's
2016-05-26 14:27:56 -07:00
schoen
9a640e01fd
Merge pull request #2962 from chrismarget/master
...
Randomize serial numbers of DVSNI challenge certificates.
2016-05-20 16:39:24 -07:00
Christopher Brown
3aed4fc59d
Typo: too many self's
...
The extra self will push along the arguments, resulting in the accurate but not very helpful error message: "AttributeError: 'JWKRSA' object has no attribute 'kty'"
2016-05-19 14:19:13 -05:00
chrismarget
6dd9991371
Fix invalid attribute for pylint
2016-05-17 20:10:20 +00:00
chrismarget
85e9624555
Added test for random certificate serial numbers from gen_ss_cert.
2016-05-17 19:50:57 +00:00
Jacob Hoffman-Andrews
8f696b3ad7
Reuse HTTP connections. ( #2855 )
...
Fixes #2778
2016-05-15 13:48:51 -07:00
Brad Warren
c8cf0b4600
Bump version to 0.7.0
2016-05-11 18:04:27 -07:00
Brad Warren
8e742fa3c6
Release 0.6.0
2016-05-11 18:04:15 -07:00
chrismarget
f7b10bb83e
Serial number randomization with improved portability.
...
No exception handling required this time.
2016-05-11 17:06:29 -04:00
chrismarget
4759bc9034
Trying to make pylint happy.
2016-05-11 16:41:19 -04:00
bmw
255e205c1a
Merge pull request #2963 from certbot/ok-directory
...
Allow unrecognized fields in Directory object
2016-05-11 13:38:09 -07:00
chrismarget
6fbd5fa811
Added missing whitespace.
2016-05-11 16:04:08 -04:00
chrismarget
7f70c09c53
Randomize serial numbers of DVSNI challenge certs.
...
Should now work on python 2.7 and 3.3+
2016-05-11 15:19:39 -04:00
Jacob Hoffman-Andrews
6f9e28fcca
Allow unrecognized fields in directory.
2016-05-11 11:11:52 -07:00
chrismarget
a7ef4940b6
Randomize DVSNI challenge certificate serial number, now for python 3.3.
2016-05-11 13:57:18 -04:00
Jacob Hoffman-Andrews
88499238ed
Merge pull request #2797 from kuba/omitempty-error-type-detail
...
ACME: omitempty Error.detail, Error.type (fixes #2289 )
2016-05-11 09:50:09 -07:00
chrismarget
639efaeb7b
Randomize serial numbers of DVSNI challenge certificates.
2016-05-11 12:01:53 -04:00
Wilfried Teiken
9396e92a96
Fix lint issues.
2016-04-25 00:46:45 -04:00
Wilfried Teiken
6196cf0aa7
Merge branch 'master' into add_dns01_challenge
2016-04-25 00:40:27 -04:00
Brad Warren
b956a968c6
this commit was authored by the Certbot Project
2016-04-14 16:56:02 -07:00
Brad Warren
ae6f1c62f1
Rename misc files
2016-04-14 10:20:23 -07:00
Jakub Warmuz
0839168de7
Fake deserialization error in test_check_response_not_ok_jobj_no_error
2016-04-10 07:50:39 +00:00
Jakub Warmuz
8145b7c11b
ACME: omitempty Error.detail, Error.type ( fixes #2289 )
2016-04-09 08:17:26 +00:00
bmw
b347e9fba1
Merge pull request #2775 from kuba/directory-meta
...
Add Directory.meta (fixes #2768 )
2016-04-07 18:37:03 -07:00
Jakub Warmuz
e4076633c8
Add Directory.meta ( fixes #2768 )
2016-04-06 06:14:31 +00:00
Brad Warren
37817130b0
Bump version to 0.6.0
2016-04-05 17:55:29 -07:00
Brad Warren
4d4cfb414f
Release 0.5.0
2016-04-05 17:55:18 -07:00
Brad Warren
1fe1ac3102
Merge branch 'master' into acme-continuity-cruft
2016-03-07 18:48:30 -08:00
Brad Warren
ec1b14e388
Whatsa DV challenge
2016-03-07 18:47:23 -08:00
Brad Warren
22a9c7e3c2
Remove unused 'other' module
2016-03-07 18:44:30 -08:00
Brad Warren
a941b6830d
remove crufty continuity challenges
2016-03-07 18:42:44 -08:00
Erik Rose
55b63fca0d
Require setuptools>=1.0 in all packages that use the cryptography lib.
...
When pip-installing any of these packages, pip hit our permissive, any-version "setuptools" dependency first and then ignored all subsequent, more constrained ones, like cryptography's "setuptools>=1.0". See https://github.com/pypa/pip/issues/988 . It thus, on a box with setuptools 0.9.8, stuck with that version. Then, at runtime, letsencrypt crashed because pkg_resources couldn't satisfy cryptography's setuptools>=1.0 requirement.
This change lets us pip-install our packages and have it work. We'll need to make sure our direct requirements (all of them) satisfy the more constrained requirements of our dependencies. Yes, it is disgusting.
2016-03-03 18:02:38 -05:00
Brad Warren
b3166497f0
Merge branch 'master' into keinwerkzeug
2016-02-25 17:16:12 -08:00
Peter Eckersley
593cb3a038
alphabetanit
2016-02-25 16:58:54 -08:00
Peter Eckersley
9a36439e1b
Tweaks per review
2016-02-22 17:26:55 -08:00
bmw
356cf890e6
Merge pull request #2482 from pfeyz/acme-example-client-fix
...
wrap csr in ComparableX509
2016-02-22 09:55:08 -08:00
Jakub Warmuz
29d16b027e
Separate pep8 config for acme.
2016-02-20 11:01:25 +00:00
Peter Eckersley
8d61c86c8c
Well actually
...
We don't need stripping after all.
2016-02-17 16:11:50 -08:00
Peter Eckersley
9fc723f316
Exceptional coverage
2016-02-16 11:52:48 -08:00
Peter Eckersley
a9780c2ddc
Test trailing whitespace in headers
2016-02-16 11:15:35 -08:00
Peter Eckersley
7f2ca5d065
Document use of email.utils parser
2016-02-16 11:15:35 -08:00
Peter Eckersley
7c8638f108
Life is simpler if we don't support HTTP/1.0 ACME servers
...
(Though in practice with py27+ we still support them)
2016-02-16 11:05:11 -08:00
Paul Feitzinger
d6b213d1e3
wrap csr in ComparableX509
2016-02-16 12:00:11 -05:00
Peter Eckersley
49aeffdebb
Address some review comments
2016-02-15 12:53:10 -08:00
Wilfried Teiken
7c3271545f
Do not log an error when getting NXDOMAIN.
2016-02-13 01:05:35 -05:00
Wilfried Teiken
e8d09ea994
Merge remote-tracking branch 'upstream/master' into add_dns01_challenge
2016-02-12 23:32:34 -05:00
Brad Warren
45ee1eb889
Merge branch 'testing-dev-extras'
2016-02-12 16:19:57 -08:00
Brad Warren
e493a0deff
Merge branch 'acme-new-authz-directory'
2016-02-12 16:11:56 -08:00
Peter Eckersley
6fd3dba737
Two digit years are used/tested in py26 only
2016-02-12 15:08:32 -08:00
Peter Eckersley
c3ddb47cfa
All this import voodoo is not required for py2.6+
2016-02-12 12:59:53 -08:00
Peter Eckersley
f1faedaa72
This two digit year case is hard to trigger
2016-02-12 12:48:20 -08:00
Peter Eckersley
0afb424173
py26 doesn't like adding lists & tuples
2016-02-12 12:29:13 -08:00
Peter Eckersley
ae69a74465
Tidy
2016-02-12 11:38:26 -08:00
Peter Eckersley
ca7f190efc
lint & cover
2016-02-12 11:29:36 -08:00
Peter Eckersley
6f99d9f3d9
fixen
2016-02-11 18:22:41 -08:00
Peter Eckersley
a34dc94b1c
bugfixes & minimalism
2016-02-11 17:28:07 -08:00
Peter Eckersley
ef404d4985
slightly simpler / more compact
2016-02-11 16:12:42 -08:00
Peter Eckersley
0ecaa8abca
rm unused var
2016-02-11 15:45:51 -08:00
Peter Eckersley
df383ee6e4
Remove werkzeug dependency by parsing Retry-After ourselves
...
Fixes #2409
Progress on #1301
2016-02-11 15:44:23 -08:00
Peter Eckersley
563c115044
Bump version to 0.5.0
2016-02-10 18:49:27 -08:00
Peter Eckersley
74063851e3
Release 0.4.0
2016-02-10 18:48:40 -08:00
Peter Eckersley
b6d0632a10
Bump version to 0.4.0
2016-01-27 17:05:25 -08:00
Peter Eckersley
cf218dd7f1
Release 0.3.0
2016-01-27 15:12:30 -08:00
Rémy HUBSCHER
b8690cd471
Make wheel universal
2016-01-21 10:11:23 +01:00
bmw
30d8394535
Merge pull request #2199 from letsencrypt/0.2.0
...
Include 0.2.0 release in master's history, and bump version
2016-01-19 17:56:44 -08:00
bmw
8301f2f57b
Merge pull request #1665 from erikrose/letsencrypt-auto-release
...
Make letsencrypt-auto release-suitable, self-upgrading, and self-contained.
2016-01-19 15:16:49 -08:00
Jakub Warmuz
3a90b4c7c5
acme: fix empty set repr py3 compat
2016-01-18 21:39:25 +00:00
Peter Eckersley
5535c0675b
Revert "Revert "Fix "global" max_attempt bug ( #1719 )""
2016-01-18 12:46:10 -08:00
Peter Eckersley
e87de72662
Revert "Fix "global" max_attempt bug ( #1719 )"
2016-01-18 12:13:51 -08:00
Peter Eckersley
e93c16a11b
Merge pull request #2111 from kuba/bugs/1719
...
Fix "global" max_attempt bug (#1719 )
2016-01-18 11:39:59 -08:00
Erik Rose
e1bd1645b6
Revert moving mock to test_requires.
...
We'll take this up later, but I don't want to hold up the new le-auto on this debate.
2016-01-15 18:25:26 -05:00
Peter Eckersley
91d958aa59
Bump version to 0.2.1.dev0
2016-01-15 15:03:53 -08:00
Erik Rose
ecbe2a5c69
Merge master in to get the unconditionalization of dependencies.
2016-01-15 13:43:36 -05:00
Wilfried Teiken
c15581bcfd
Fix lint problems.
2016-01-14 23:37:05 -05:00
Wilfried Teiken
b65da1da76
Merge branch 'add_dns01_challenge' into test-add_dns01_challenge
2016-01-14 23:05:49 -05:00
Wilfried Teiken
b9dafc203f
Merge branch 'master' into add_dns01_challenge
2016-01-14 23:01:06 -05:00
Brad Warren
e59fcf7ddd
Release 0.2.0
2016-01-14 17:39:18 -08:00
Brad Warren
2e034e6c6c
Revert changes to acme's setup.py
2016-01-14 11:42:10 -08:00
Erik Rose
2771249522
Merge master in before computing a known-good set for 0.2.0.
...
This also serves as a suitable base to build sdists for isnot.org, so we can try the old le-auto script against mockless versions of the LE packages.
2016-01-13 18:23:51 -05:00
Erik Rose
c3ea4bdc9b
Roll back change to acme's pylintrc, which was needed to get lint to pass on Travis's Trusty beta (sudo) infra.
...
We're stepping off that infra briefly, to keep it the same as boulder's. When we retire the old le-auto, we'll step back on and change boulder to use it as well.
2016-01-13 17:22:59 -05:00
Peter Eckersley
9500f2b3c3
Merge pull request #2139 from kuba/acme-pylint-80
...
ACME: pylint to 80 chars
2016-01-13 00:31:02 -08:00
bmw
de89eb89e2
Merge pull request #2135 from kuba/acme-client-dead-error
...
Remove dead code (error in except)
2016-01-12 14:50:15 -08:00
bmw
9167871a82
Merge pull request #2132 from kuba/acme-account-key-none-docs
...
Fix wrong doc comment: account_public_key is None
2016-01-12 14:49:43 -08:00
bmw
591f0376e8
Merge pull request #2089 from wteiken/fix_regr_from_resource
...
Update new_authzr_uri when querying or updating a registration
2016-01-12 14:45:54 -08:00
Erik Rose
a3288a92b9
Disable too-many-instance-attributes for the acme linter.
...
This should make the linter pass and allow us to merge the letsencrypt-auto-release branch when it's ready. IHNI why it passes on master without this disabled.
2016-01-12 14:25:36 -05:00
Erik Rose
ed562645e0
Master master into letsencrypt-auto-release so Travis will build it.
2016-01-11 21:45:16 -05:00
Erik Rose
6c05197a43
Remove mock as an install requirement.
...
The motivation is to free us of a reliance on a rather modern version of setuptools, which caused le-auto failures for people on Wheezy and other older distros. (The alternative would have been to forcibly upgrade setuptools as the old le-auto did, but less is more.)
Mock is used only in tests, so we move it to tests_require. It will still be installed automatically when setup.py test is run. Give all packages a test_suite so this works.
The "testing" extra remains for optional packages not required for the nose tests but used in tox. However, the extra is much less useful now and is a candidate for deletion. We could roll the list of packages therein into the tox config so as not to favor any particular package.
Remove tests_require=install_requires, which I don't think does anything useful, since install requirements are implicitly installed when running setup.py test.
Fix tests to pass with mock removed. We had to stop them pulling down LE from PyPI, since the current version there (0.1.1) requires mock and explodes when `letsencrypt` is run.
2016-01-11 21:26:41 -05:00
Wilfried Teiken
05a61c181b
Lint fixes.
2016-01-10 21:42:20 -05:00
Wilfried Teiken
9179276cb9
Modify dns_resolver_test to skip tests if dnspython is not available.
2016-01-10 20:59:11 -05:00
Wilfried Teiken
1ff121b616
pcoverage fix
2016-01-10 18:08:16 -05:00
Wilfried Teiken
2d8de74f4a
pcoverage fix
2016-01-10 17:13:25 -05:00
Wilfried Teiken
0010610a4a
py3X fix
2016-01-10 17:06:03 -05:00
Wilfried Teiken
cfe56cbd92
2.6 compatible skipping of tests.
2016-01-10 17:00:14 -05:00
Jakub Warmuz
bdd9fa4485
Quickfix too-many-instance-attributes.
...
https://github.com/letsencrypt/letsencrypt/pull/2135#issuecomment-170381179
2016-01-10 18:47:04 +00:00
Jakub Warmuz
86d6d27045
Clean up dev/testing extras messup ( fixes #2140 ).
2016-01-10 18:37:41 +00:00
Jakub Warmuz
fac2ed41d8
ACME: pylint to 80 chars
2016-01-10 18:17:35 +00:00
Jakub Warmuz
31a64a0e9f
ACME: default to new_authzr_uri form Directory
2016-01-10 18:01:58 +00:00
Wilfried Teiken
49c40e7a58
Skip dns_resolver tests if dnspython is not available.
2016-01-10 13:00:38 -05:00
Wilfried Teiken
f2b52bd830
Fix dcumentation
2016-01-10 12:58:29 -05:00
Jakub Warmuz
0a536d50be
Remove dead code (error in except)
2016-01-10 17:31:50 +00:00
Jakub Warmuz
c10bfd6efc
Fix wrong doc comment: account_public_key is None
2016-01-10 14:01:34 +00:00
Jakub Warmuz
3cddb15023
Merge remote-tracking branch 'github/letsencrypt/master' into pyopenssl
2016-01-10 11:25:12 +00:00
Jakub Warmuz
1182dcf0c2
Merge remote-tracking branch 'github/letsencrypt/master' into acme-pylint
2016-01-10 11:17:03 +00:00
Peter Eckersley
bf4793039a
Merge remote-tracking branch 'origin/master' into pyopenssl
2016-01-10 02:39:54 -08:00
Wilfried Teiken
d842f268e5
- Use dnspython3 fir py3X environments.
...
- Fix encoding for simple_verify.
2016-01-09 17:07:20 -05:00
Wilfried Teiken
e7ce5e9f53
Merge branch 'master' into add_dns01_challenge
2016-01-09 15:19:47 -05:00
Wilfried Teiken
446994e8ef
Limit length of try block.
2016-01-09 14:58:19 -05:00
Jakub Warmuz
b26dda3afe
Add Python 3.5 trove classifier to acme
2016-01-09 13:38:12 +00:00
Jakub Warmuz
a367c98409
Merge remote-tracking branch 'github/letsencrypt/master' into acme-pylint
2016-01-09 12:50:13 +00:00
Erik Rose
f2586fbc11
Merge master in so Travis will test this PR.
2016-01-08 17:08:30 -05:00
bmw
96b55c8f34
Revert "Don't use cryptography version 1.2"
2016-01-08 17:02:35 -05:00
Erik Rose
1d719bd89c
Teach le-auto about dependencies that are conditional on the Python version.
2016-01-08 15:31:22 -05:00
Brad Warren
b1e67f241e
Fix merge conflicts properly
2016-01-08 14:31:30 -05:00
Brad Warren
36679c2daa
Merge branch 'master' into pyopenssl
2016-01-08 14:27:07 -05:00
Brad Warren
a7a7380110
Merge branch 'master' into pyopenssl
2016-01-08 14:26:13 -05:00
Brad Warren
b039c884d8
Don't use cryptography version 1.2
2016-01-08 14:09:44 -05:00
Brad Warren
639cbeb7d0
sans_text_dump_comment += 1
2016-01-07 21:11:09 -05:00
Jakub Warmuz
dba69d079f
Separate pylintrc for acme
2016-01-07 22:20:46 +00:00
Jakub Warmuz
cc168c8ef1
Generate fresh pylintrc
...
pylint 1.4.2, -generate-rcfile
2016-01-07 22:17:42 +00:00
Brad Warren
946f4474da
Add warning about multiple SANs extensions
2016-01-07 16:45:46 -05:00
Brad Warren
32957cc5ec
Comment _pyopenssl_cert_or_req_san method
2016-01-07 16:25:23 -05:00
Jakub Warmuz
6548f343bf
Add invalidEmail error type to acme
...
Related to:
- #1923
- https://github.com/ietf-wg-acme/acme/pull/65
2016-01-07 21:20:25 +00:00
Brad Warren
710eb59f41
Fix IDN CSR test name
2016-01-07 16:19:21 -05:00
Jakub Warmuz
a36a59ba6c
Fix waiting->exhausted in PollError tests
2016-01-07 20:31:40 +00:00
Jakub Warmuz
4d04d14b20
Fix "global" max_attempt bug ( #1719 )
2016-01-07 20:25:07 +00:00
Jakub Warmuz
fea4b24fb8
Add test to discover "global" max_attempt bug ( #1719 )
2016-01-07 20:20:57 +00:00
Brad Warren
0f239e0029
Add comment about dependency version
2016-01-07 13:04:29 -05:00
Brad Warren
caf9b1f261
Clarify _get_idn_sans method
2016-01-07 13:00:29 -05:00
Wilfried Teiken
02a493011e
Remove superfluous except: and change Exception returned if dnspython is not
...
available.
2016-01-06 22:56:59 -05:00
Brad Warren
0b1e1d0937
Use test_util.load_cert
2016-01-06 22:07:45 -05:00
Brad Warren
51bc1311a2
Fixed rogue quotes
2016-01-06 15:34:42 -05:00
Brad Warren
1cdff156c9
Add IDN test
2016-01-06 15:33:36 -05:00
Brad Warren
96114ba84e
Add IDN SANs CSR and cert
2016-01-06 15:10:08 -05:00
Brad Warren
ba93c57697
Added large sans cert and csr test
2016-01-06 14:22:13 -05:00
Brad Warren
32650a6d08
Added 100 SANs cert and csr
2016-01-06 14:10:57 -05:00
Brad Warren
1af997158d
Fix repr differences between PyOpenSSL versions
2016-01-06 13:39:14 -05:00
Brad Warren
6f7299f9ed
Merge branch 'master' into pyopenssl
2016-01-06 12:40:56 -05:00
Brad Warren
6719d0d380
Rewrote _pyopenssl_cert_or_req_san
2016-01-06 12:40:44 -05:00
Wilfried Teiken
6bc3060fbb
More fixes for travis tests
2016-01-06 03:11:09 -05:00
Wilfried Teiken
b73b410729
Exclude import error case from coverage in dns_resolver
2016-01-06 02:59:25 -05:00
Wilfried Teiken
52c487f462
Add new 'test' extras and update tox.ini accordingly.
2016-01-06 02:44:19 -05:00
Wilfried Teiken
d2ced2de6a
Dep fixes for lint/coverage.
2016-01-06 01:48:12 -05:00
Wilfried Teiken
a9a5e60bc5
Added requirements for coverage and lint.
2016-01-06 01:26:32 -05:00
Wilfried Teiken
dc743fb57c
Move DNS resolver to separate module to decouple dependencies and testing.
2016-01-06 01:11:24 -05:00
Wilfried Teiken
57c265c7f3
Setup.py and style fixes
2016-01-06 00:27:07 -05:00
Wilfried Teiken
fd2709a6fa
Move dnspython dependency to tests only and only import the dns.resolver when
...
actually resolving the client. That way user code that does not call
'simple_verify' for DNS01 challenges does not depend on dnspython.
2016-01-05 23:58:23 -05:00
Wilfried Teiken
4403a78e52
Move txt_records_for_name out of class.
2016-01-05 22:25:24 -05:00
wteiken
b5bb90628c
Style changes.
2016-01-05 20:33:30 -05:00
wteiken
7bd7e7ca23
Remove response argument from exception and fix eror messages.
2016-01-05 19:51:45 -05:00
bmw
4c28fc417c
Merge pull request #2073 from alex/more-typos
...
Fixed a pair of typos in docstrings
2016-01-05 18:02:19 -05:00
Wilfried Teiken
e1b4797cbf
Change the semantics of query_registration and update_registration to set
...
new_authzr_uri from the server if available
2016-01-05 01:12:21 -05:00
Wilfried Teiken
7747dc8488
Remove non-compliant hexdigit encoding for dns-01 challenges ( #2052 is now
...
merged).
2016-01-04 19:46:28 -05:00
Alex Gaynor
0454031cce
Fixed a pair of typos in docstrings
2016-01-03 14:37:08 -05:00
Wilfried Teiken
97fb1a03f9
Documentation fixes.
2016-01-03 13:19:32 -05:00
Alex Gaynor
dc3a2da9b1
Fixed a typo in a comment
2016-01-03 10:49:50 -05:00
Wilfried Teiken
64f3f53467
Fix
2016-01-02 13:51:37 -05:00
Brad Warren
8680a29c9d
Merge branch 'master' into pyopenssl
2016-01-02 13:11:11 -05:00
Wilfried Teiken
7e2a1532ef
Move dns record retrieval into a separate method.
2016-01-02 12:53:47 -05:00
Wilfried Teiken
ffc2b1ee78
- Lint fixes
...
- Add test for multiple TXT records returned
- Add extra parameter in DNS01.validation to select hexdigit vs. bas64 encoded
validation
2016-01-02 01:42:47 -05:00
Wilfried Teiken
55ca1b484f
Initial verison of DNS-01 implementation
2016-01-01 20:55:52 -05:00
Jakub Warmuz
fd4f6fb2ee
Use GH pages for IETF spec repo link
2015-12-29 08:47:14 +00:00
Brad Warren
75b551762b
Expose wrapped, not dump
2015-12-23 19:09:05 -05:00
Brad Warren
980637a936
Audit calls to test_util.load_cert
2015-12-23 17:12:33 -05:00
Brad Warren
66a861ead1
Add test_comparable_{cert,csr}
2015-12-23 13:48:52 -05:00
bmw
0bbe7c235b
Merge pull request #1965 from Natim/patch-1
...
Update the ACME github repository URL.
2015-12-23 11:26:43 -05:00
Rémy HUBSCHER
ebfe1254ea
Update the ACME github repository URL.
2015-12-23 13:54:58 +01:00
Rémy HUBSCHER
212f04fd92
@kuba review
2015-12-20 16:03:12 +01:00
Brad Warren
a28f8fe442
Drop version dependency
2015-12-17 17:47:15 -08:00
Brad Warren
7efdac6c66
Fixed SANs problem
2015-12-17 17:28:36 -08:00
Rémy HUBSCHER
6958710030
@pde review.
2015-12-17 10:13:09 +01:00
Brad Warren
d21ca90560
Use dump on ComparableX509
2015-12-16 17:33:08 -08:00
Brad Warren
db712534e5
Make dump() public
2015-12-16 16:53:12 -08:00
Alex Gaynor
d983429f82
Fixed a type in a docstring
2015-12-12 16:12:10 -05:00
Peter Eckersley
c34088d349
Merge pull request #1879 from alex/patch-1
...
Fixed an inaccurate comment
2015-12-12 13:03:45 -08:00
Alex Gaynor
916a946bcd
Simplify the ACME example client by using an existing method
2015-12-12 14:50:26 -05:00
Alex Gaynor
f5fde98ab6
Fixed an inaccurate comment
...
While it's true that older Pythons do not do (critical) TLS validation by default, that's not what this warning is about.
2015-12-12 14:38:21 -05:00
Gene Wood
753022d8e3
Clarify error messages with acronym DV
2015-12-05 11:02:14 -08:00
Jakub Warmuz
7a6e084e3a
Unbreak master
2015-12-03 15:55:17 +00:00
Peter Eckersley
9c687a2a7d
Release 0.1.0
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWX4UBAAoJEE0XyZXNl3XyjBgH/RijhtTma/4VTolatVImHjfL
KWBMM7awew3oruZOqKgzhdAe4tHnIcDoBh+yMq0R+ssXcHj57RrUIFB+8heTG7eP
4ynpnXEKRlRAjJ/V+53ZIvIT+bnCBFFJt2tb7c6qPzIW4xWY/hEJo13QBqCEIpE1
p/2C1ZNE6He7HSOsw9NtHxhuNsuvNs0XRwdCamJ2rUF0XOT0jH05KdILfEWq22To
tApNUMsAIoNuZv2EQDSgmtrpQTeZPza3Ht3Xv4vABvoIBwpBw+QXFeWi24hzHye5
kj6Rp5rFNbgNqyvP2UlnEaME+zyQiNsjIXc2RumUyGY8ufj47twOvD4hBdDrEYs=
=lraD
-----END PGP SIGNATURE-----
Merge tag 'v0.1.0'
Release 0.1.0
2015-12-03 01:38:15 -08:00
Marius Gedminas
c7dbf8aa24
Avoid trailing whitespace in pretty-printed JSON
...
Fixes a failing test on Python 3.3:
======================================================================
FAIL: test_json_dumps_pretty (acme.jose.interfaces_test.JSONDeSerializableTest)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/mg/src/letsencrypt/acme/acme/jose/interfaces_test.py", line 97, in test_json_dumps_pretty
'[\n "foo1",{0}\n "foo2"\n]'.format(filler))
AssertionError: '[\n "foo1", \n "foo2"\n]' != '[\n "foo1",\n "foo2"\n]'
[
- "foo1",
? -
+ "foo1",
"foo2"
]
----------------------------------------------------------------------
(The test expected trailing whitespace on Python < 3.0, while it
should've been checking for Python < 3.4.)
2015-12-03 09:52:59 +02:00
Peter Eckersley
5747ab7fd9
Release 0.1.0
2015-12-02 15:55:43 -08:00
bmw
e2e2a29dee
Merge pull request #1635 from kuba/poll_and_request-timeout
...
poll_and_ri: handle STATUS_INVALID, add max_attempts (fixes #1634 )
2015-11-30 16:36:24 -08:00
Jakub Warmuz
218379c2be
poll_and_ri: handle STATUS_INVALID, add max_attempts ( fixes #1634 )
2015-11-29 09:26:03 +00:00
Peter Eckersley
43fdb8977f
Merge pull request #1413 from kuba/acme-custom-errors
...
Custom acme.messages.Error (fixes #946 ).
2015-11-28 02:06:36 -08:00
Brad Warren
b2ca861a27
Revert "Quikfix"
...
This reverts commit a97a702210
2015-11-25 09:44:28 -05:00
Brad Warren
a97a702210
Quikfix
2015-11-24 16:04:00 -05:00
Patrick Figel
c175ff955e
Remove Content-Type checks from http-01
...
Content-Type type restrictions were removed in ACME, see
69ac2baadefixes #1595
2015-11-24 09:54:33 +01:00
Patrick Figel
2bc0c31f2e
Trim trailing whitespace during challenge self-verification
...
fixes #1322
2015-11-21 08:59:35 +01:00
Peter Eckersley
ca05b35a24
Merge pull request #1412 from kuba/pep8
...
pep8 love
2015-11-12 00:29:15 -08:00
Rémy Léone
e64149cae8
Redeclared names without usage
2015-11-11 13:27:09 +01:00
Jakub Warmuz
0dbb235961
Merge remote-tracking branch 'github/letsencrypt/master' into acme-standalone-log
2015-11-08 06:51:34 +00:00
Jakub Warmuz
c18f0b7073
Add rtype docs
2015-11-08 06:34:28 +00:00
Jakub Warmuz
37574e60e1
hexdigest lower()
2015-11-08 06:29:48 +00:00
Jakub Warmuz
8208470395
More docs about ports
2015-11-08 06:26:22 +00:00
Jakub Warmuz
6d32c2e5a4
Rename DVSNIRequestHandler to BaseRequestHandlerWithLogging.
2015-11-07 23:00:43 +00:00
Jakub Warmuz
1f6f6a7451
Logging in HTTP01RequestHandler: more and not to sys.stderr.
2015-11-07 22:57:39 +00:00
Jakub Warmuz
465efc9601
Custom acme.messages.Error ( fixes #946 ).
2015-11-07 20:01:29 +00:00
Jakub Warmuz
d0a2b38457
pep8 for docs/conf.py
2015-11-07 19:36:08 +00:00
Jakub Warmuz
bbb7606fe1
Kill dvsni in acme
2015-11-07 18:35:41 +00:00
Jakub Warmuz
2266baf775
Renames around DVSNIServer
2015-11-07 18:24:17 +00:00
Jakub Warmuz
b864c77b62
Add tls-sni-01 to acme
2015-11-07 14:24:43 +00:00
Jakub Warmuz
c805ebc2bf
Use KEY in DVSNI tests
2015-11-07 14:24:43 +00:00
Jakub Warmuz
3a5f7a026b
Fix old reference to SimpleHTTP
2015-11-07 14:24:43 +00:00
Jakub Warmuz
dc60cdbc7d
User-Agent support in acme (default: acme-python, fixes #1351 ).
...
In order to override the default (`acme-python`), clients (including
Let's Encrypt: #858 , #1397 ) should create a custom
acme.clietn.ClientNetwork object and pass it to
acme.client.Client.__init__.
2015-11-07 08:55:54 +00:00
Brad Warren
3532404705
Nit fix
2015-11-02 17:18:44 -08:00
Jakub Warmuz
99c5c2034f
Revert "Quickfix for misterious abstract-class-little-used"
...
This reverts commit 01bc073111
2015-11-01 11:19:35 +00:00
Jakub Warmuz
44adeadf1b
Merge remote-tracking branch 'github/letsencrypt/master' into http-01
2015-11-01 11:09:59 +00:00
Jakub Warmuz
1d36a15ab7
Kill simpleHttp in acme
2015-11-01 11:01:22 +00:00
Jakub Warmuz
ea3611afe6
http-01 for standalone
2015-11-01 11:01:22 +00:00
Jakub Warmuz
01bc073111
Quickfix for misterious abstract-class-little-used
2015-11-01 11:01:22 +00:00
Jakub Warmuz
602f0b2dbe
Add http-01 to acme
2015-11-01 11:01:22 +00:00
Jakub Warmuz
d2c5b87b95
Fix documentation for account{,_public}_key docs in acme.challenges.
...
account_key and account_public_key are JWK, not ComparableKey.
2015-10-31 19:50:10 +00:00
Jakub Warmuz
dc81575527
Factor out _TokenDVChallenge.
2015-10-31 19:50:10 +00:00
Jakub Warmuz
f8185c1913
Add Python 2.6 setup.py classifiers.
2015-10-31 11:47:25 +00:00
bmw
c8999f86a1
Merge pull request #1200 from kuba/bugs/1085
...
Remove serve_forever2/shutdown2 (reduces probability of #1085 ).
2015-10-29 18:20:36 -07:00
bmw
971fa153ea
Merge pull request #1169 from kuba/acme-example-client
...
Update ACME example client
2015-10-29 16:27:44 -07:00
bmw
d23a7fd40d
Merge pull request #1203 from kuba/offline-unittests2
...
Offline unittest v2.
2015-10-29 15:45:48 -07:00
Jakub Warmuz
4cc0610679
Remove serve_forever2/shutdown2 (reduces probability of #1085 ).
...
I'm not even sure why `serve_forever2` and `shutdown2` were introduced
in the first place... It probably follows from my misconception about
the SocketServer module. After having studied the module again, I come
to the conclusion that we can get rid of my crap, simultanously
reducing probability of #1085 (hopefully down to 0)!
`server_forever` is used throughout tests instead of `handle_request`,
because `shutdown`, following docs, "must be called while
serve_forever() is running in another thread, or it will deadlock",
and our `probe_sni` HTTP request is already enough to kill single
`handle_request`.
We don't need to use any busy waiting block or `sleep` between serve
and shutdown; studying CPython source code leads to the conclusion
that the following construction is non-blocking:
```python
import threading, SocketServer
s = SocketServer.TCPServer(("", 0), None)
t = threading.Thread(target=s.shutdown)
t.start()
s.serve_forever() # returns immediately
t.join() # returns immediately
```
2015-10-29 21:02:21 +00:00
Jakub Warmuz
c3fbed1f81
Offline unittest v2.
...
Supersedes https://github.com/letsencrypt/letsencrypt/pull/1183 .
2015-10-29 08:19:54 +00:00
Jakub Warmuz
d5a5224dbd
No newlines in JWK thumbprint ( fixes #1165 )
2015-10-28 08:20:58 +00:00
Jakub Warmuz
323f9a10a1
Update example ACME client to work with Boulder
2015-10-28 07:27:52 +00:00
Jakub Warmuz
f42515ebe4
Include example ACME client in docs
2015-10-28 07:16:40 +00:00
Jakub Warmuz
e8cfedb34d
Move example ACME client to acme subpkg
2015-10-28 07:10:53 +00:00
Till Maas
e5f06bacbd
Add missing newline to standalone README
2015-10-27 20:12:34 +01:00
Jakub Warmuz
cd07d3aa27
MANIFEST: include examples dir for acme
2015-10-24 13:39:38 +00:00
Jakub Warmuz
3202f35a90
Merge remote-tracking branch 'github/letsencrypt/master' into py2.6-3
2015-10-22 05:42:01 +00:00
Jakub Warmuz
ca464c25fb
Split JOSE API docs
2015-10-21 17:06:36 -07:00
Jakub Warmuz
5b757bdff2
Split ACME API docs
2015-10-21 17:06:36 -07:00
Jakub Warmuz
fe49889b16
Per subpkg requirements.txt for RTD
2015-10-21 17:06:36 -07:00
Jakub Warmuz
f922b9b694
Split docs into subpkgs ( fixes #969 )
2015-10-21 17:06:36 -07:00
Jakub Warmuz
946ee63238
docs_extra for subpkgs
2015-10-21 17:06:36 -07:00
Jakub Warmuz
5fe5d69192
Include docs in subpkgs tarballs
2015-10-21 17:06:36 -07:00
Jakub Warmuz
baa6c4aeec
gitignores for various doc files
2015-10-21 17:06:36 -07:00
Jakub Warmuz
86f01d1fa9
sphinx: copyright 2014-2015
2015-10-21 17:06:36 -07:00
Jakub Warmuz
dfdb64c505
sphinx: default_role py:obj
2015-10-21 17:06:36 -07:00
Jakub Warmuz
1f0cbda9fc
Unify autodoc options
2015-10-21 17:06:36 -07:00
Jakub Warmuz
1a6fc9ce76
RTD theme everywhere!
2015-10-21 17:06:36 -07:00
Jakub Warmuz
607ea59fd3
Add extensions for subpkgs docs
2015-10-21 17:06:35 -07:00
Jakub Warmuz
635008f5e6
Configure intersphinx
2015-10-21 17:06:35 -07:00
Jakub Warmuz
b9868d3c97
sphinx-quickstart for subpkgs
...
```
sphinx-quickstart --dot _ --project acme-python --author Let's Encrypt Project -v 0 --release 0 --language en --suffix .rst --master index --ext-autodoc --ext-intersphinx --ext-todo --ext-coverage --ext-viewcode --makefile --batchfile acme/docs
sphinx-quickstart --dot _ --project letsencrypt-apache --author Let's Encrypt Project -v 0 --release 0 --language en --suffix .rst --master index --ext-autodoc --ext-intersphinx --ext-todo --ext-coverage --ext-viewcode --makefile --batchfile letsencrypt-apache/docs
sphinx-quickstart --dot _ --project letsencrypt-nginx --author Let's Encrypt Project -v 0 --release 0 --language en --suffix .rst --master index --ext-autodoc --ext-intersphinx --ext-todo --ext-coverage --ext-viewcode --makefile --batchfile letsencrypt-nginx/docs
sphinx-quickstart --dot _ --project letshelp-letsencrypt --author Let's Encrypt Project -v 0 --release 0 --language en --suffix .rst --master index --ext-autodoc --ext-intersphinx --ext-todo --ext-coverage --ext-viewcode --makefile --batchfile letshelp-letsencrypt/docs
sphinx-quickstart --dot _ --project letsencrypt-compatibility-test --author Let's Encrypt Project -v 0 --release 0 --language en --suffix .rst --master index --ext-autodoc --ext-intersphinx --ext-todo --ext-coverage --ext-viewcode --makefile --batchfile letsencrypt-compatibility-test/docs
```
2015-10-21 17:06:35 -07:00
Jakub Warmuz
934301abc6
Fix ACME module description
2015-10-21 17:06:35 -07:00
Jakub Warmuz
e52922b11e
Fix getsockname usage with IPv6
2015-10-20 20:44:18 +00:00
Jakub Warmuz
11495c5820
Better logging for start/stop acme.standalone servers.
2015-10-20 20:16:12 +00:00
Jakub Warmuz
f2792d0fb8
Merge remote-tracking branch 'github/letsencrypt/master' into py2.6-3
2015-10-18 19:31:16 +00:00
Jakub Warmuz
7a9ceaae2e
lint
2015-10-18 12:33:06 +00:00
Jakub Warmuz
4090085b17
Avoid race conditions in acme.standalone_test.
2015-10-18 12:22:54 +00:00
Jakub Warmuz
09fa1153d9
Merge remote-tracking branch 'github/letsencrypt/master' into py2.6-3
2015-10-17 07:28:04 +00:00
Jakub Warmuz
e7809563b1
Address first batch of Seth's review comments.
2015-10-15 17:23:43 +00:00
Jakub Warmuz
244a020b0a
Merge remote-tracking branch 'github/letsencrypt/master' into standalone2
2015-10-14 17:26:35 +00:00
Jacob Hoffman-Andrews
d5fd9986de
Add rateLimited error type.
2015-10-14 09:26:59 -07:00
Jakub Warmuz
c4042e6ce8
Busy wait loop for testing serve_forever2
...
This fixes race conditions, such as those in
https://travis-ci.org/letsencrypt/letsencrypt/jobs/84990239 :
+ nosetests -c /dev/null --with-cover --cover-tests --cover-package acme --cover-min-percentage=100 acme
.......................................................................................................................................................................................................................................................................................................................................................Exception in thread Thread-5:
Traceback (most recent call last):
File "/opt/python/2.7.9/lib/python2.7/threading.py", line 810, in __bootstrap_inner
self.run()
File "/opt/python/2.7.9/lib/python2.7/threading.py", line 763, in run
self.__target(*self.__args, **self.__kwargs)
File "/opt/python/2.7.9/lib/python2.7/SocketServer.py", line 271, in handle_request
timeout = self.socket.gettimeout()
File "/opt/python/2.7.9/lib/python2.7/socket.py", line 224, in meth
return getattr(self._sock,name)(*args)
File "/opt/python/2.7.9/lib/python2.7/socket.py", line 170, in _dummy
raise error(EBADF, 'Bad file descriptor')
error: [Errno 9] Bad file descriptor
.127.0.0.1 - - [12/Oct/2015 20:08:23] "GET /foo HTTP/1.1" 404 -
.127.0.0.1 - - [12/Oct/2015 20:08:23] "GET / HTTP/1.1" 200 -
.127.0.0.1 - - [12/Oct/2015 20:08:23] "GET /.well-known/acme-challenge/eHh4eHh4eHh4eHh4eHh4eA HTTP/1.1" 200 -
.....
Name Stmts Miss Cover Missing
------------------------------------------------------------
acme.py 0 0 100%
acme/challenges.py 215 0 100%
acme/challenges_test.py 366 0 100%
acme/client.py 215 0 100%
acme/client_test.py 308 0 100%
acme/crypto_util.py 92 0 100%
acme/crypto_util_test.py 53 0 100%
acme/errors.py 19 0 100%
acme/errors_test.py 18 0 100%
acme/fields.py 32 0 100%
acme/fields_test.py 41 0 100%
acme/jose.py 8 0 100%
acme/jose/b64.py 15 0 100%
acme/jose/b64_test.py 38 0 100%
acme/jose/errors.py 12 0 100%
acme/jose/errors_test.py 8 0 100%
acme/jose/interfaces.py 39 0 100%
acme/jose/interfaces_test.py 73 0 100%
acme/jose/json_util.py 170 0 100%
acme/jose/json_util_test.py 214 0 100%
acme/jose/jwa.py 105 0 100%
acme/jose/jwa_test.py 58 0 100%
acme/jose/jwk.py 114 0 100%
acme/jose/jwk_test.py 96 0 100%
acme/jose/jws.py 205 0 100%
acme/jose/jws_test.py 145 0 100%
acme/jose/util.py 114 0 100%
acme/jose/util_test.py 126 0 100%
acme/jws.py 17 0 100%
acme/jws_test.py 27 0 100%
acme/messages.py 184 0 100%
acme/messages_test.py 198 0 100%
acme/other.py 21 0 100%
acme/other_test.py 48 0 100%
acme/standalone.py 102 1 99% 58
acme/standalone_test.py 109 0 100%
acme/test_util.py 28 0 100%
acme/util.py 3 0 100%
acme/util_test.py 7 0 100%
------------------------------------------------------------
TOTAL 3643 1 99%
nose.plugins.cover: ERROR: TOTAL Coverage did not reach minimum required: 100%
2015-10-13 07:09:28 +00:00
Jakub Warmuz
73ae361559
Merge remote-tracking branch 'github/letsencrypt/master' into standalone2
2015-10-12 19:36:46 +00:00
Jakub Warmuz
a1a6120abf
Add py3 trove classifiers for acme
2015-10-11 16:03:32 +00:00
Jakub Warmuz
7a153ebf50
Revert "Release 0.0.0.dev20151008"
...
This reverts commit 9e1477faa4
2015-10-11 07:05:35 +00:00
bmw
013d5d2ea9
Merge pull request #929 from kuba/bugs/928
...
Fix #928 test_json_dumps_pretty py3 compat.
2015-10-09 15:38:29 -07:00
Jakub Warmuz
304414a214
Remove SimpleHTTP TLS from acme.
2015-10-08 21:10:12 +00:00
Jakub Warmuz
6dfb75b96f
Fix #928 test_json_dumps_pretty py3 compat.
2015-10-08 20:32:25 +00:00
Jakub Warmuz
9e1477faa4
Release 0.0.0.dev20151008
2015-10-08 19:28:55 +00:00
Jakub Warmuz
f0214ddf9a
Merge commit 'a2c41ca7f539303cb413ba3e73d3669633063150' into standalone2
2015-10-07 19:07:44 +00:00
Jakub Warmuz
f0c11152d2
ACMEServerMixin.__init__
2015-10-07 19:00:47 +00:00
Jakub Warmuz
c6ebfae15e
Unify quotes
2015-10-06 21:11:52 +00:00
Jakub Warmuz
3dac62f20e
json_dumps_pretty: prettier separators.
2015-10-06 21:11:52 +00:00
Jakub Warmuz
7e1b7ff7ae
Add naive JWK Thumbprint implementation
2015-10-06 21:05:43 +00:00
Jakub Warmuz
c3e28fa909
Merge remote-tracking branch 'github/letsencrypt/master' into mock-2.6
2015-10-05 19:31:05 +00:00
Jakub Warmuz
ea45fc6504
TestSimpleServer: don't rely on symlinks
2015-10-04 19:15:05 +00:00
Jakub Warmuz
df04938f6a
Standalone 2.0: add detection for unsupported SimpleHTTP TLS platform.
2015-10-04 19:14:58 +00:00
Jakub Warmuz
517a74f432
standalone 2.0: lint, docs, cleanup.
2015-10-04 17:21:35 +00:00
Jakub Warmuz
22b1514f51
server_forever2/shutdown2
2015-10-04 12:14:10 +00:00
Jakub Warmuz
560d12a40c
Merge remote-tracking branch 'github/letsencrypt/master' into standalone2
2015-10-04 10:24:47 +00:00
Jakub Warmuz
7644613171
Update Copyright notice in subpackages LICENSE.
...
This corresponds to changes in #871 .
2015-10-04 10:10:41 +00:00
Jakub Warmuz
4ef7a6e63f
Merge remote-tracking branch 'github/letsencrypt/master' into release
2015-10-04 10:08:38 +00:00
Jakub Warmuz
3f08932479
Merge remote-tracking branch 'github/letsencrypt/master' into mock-2.6
2015-10-04 08:41:01 +00:00
Jakub Warmuz
0ffef20a20
UnrecognizedChallenge: fix tests and lint.
2015-09-29 07:02:33 +00:00
Jakub Warmuz
ad1fce03f7
UnrecognizedChallenge ( fixes #855 ).
...
Overrides quick fix from #856 .
2015-09-29 06:47:15 +00:00
James Kasten
5238f53092
DVChallenge -> Challenge
2015-09-28 16:03:03 -07:00
James Kasten
67ec4d09ee
Put in dummy challenge
2015-09-28 15:53:42 -07:00
James Kasten
fa992faf52
Fix pylint and add test
2015-09-28 15:24:51 -07:00
Richard Barnes
ab98d5c39f
Ignore unknown challenge types
2015-09-28 17:14:33 -04:00
Jakub Warmuz
5d8e9a3d68
Fix various doc generation issues
2015-09-27 21:07:40 +00:00
Jakub Warmuz
d621df3320
Make zipsafe
2015-09-27 11:10:34 +00:00
Jakub Warmuz
45a0cd2799
Fix include_package_data.
2015-09-27 08:11:40 +00:00
Jakub Warmuz
9883f8965d
Add dummy README.rst files
2015-09-27 06:23:13 +00:00
Jakub Warmuz
033ed589cc
Development Status :: 3 - Alpha
2015-09-27 06:23:13 +00:00
Jakub Warmuz
b6819ad05b
Add general classifiers to all setup.py scripts.
2015-09-27 06:23:13 +00:00
Jakub Warmuz
b5036e36ad
Unify setup.py: description/url/author/author_email.
2015-09-27 06:23:12 +00:00
Jakub Warmuz
20131de9fb
Add licences to all subpackages.
2015-09-27 06:23:12 +00:00
Jakub Warmuz
746016be6c
Sync version strings to 0.1.0.dev0, pin same repo deps.
2015-09-27 06:23:12 +00:00
Jakub Warmuz
daa459f277
Add acme.standalone
2015-09-26 16:50:59 +00:00
Jakub Warmuz
1b24fdae84
acme: challenges helpers
2015-09-26 16:50:59 +00:00
Jakub Warmuz
d73b600eeb
acme: _serve_sni -> SSLSocket
2015-09-26 16:50:59 +00:00
Jakub Warmuz
08c0c4aeba
Explicit dependency on setuptools (pkg_resources).
2015-09-26 10:52:28 +00:00
Peter Eckersley
bde5a1fe17
Merge branch 'treat_duplicate_as_renewal' into kuba_chain
2015-09-15 17:51:58 -07:00
bmw
a150828a79
Merge pull request #753 from kuba/dns-v4
...
acme: v4 DNS challenge
2015-09-14 16:21:38 -04:00
Jakub Warmuz
33c2aed021
Merge remote-tracking branch 'github/letsencrypt/master' into lint
2015-09-11 07:15:10 +00:00
Jakub Warmuz
b3ade6abe4
Revert "Revocation: expect application/json (boulder#771)."
...
This reverts commit 39aff967a5
2015-09-10 20:43:20 +00:00
Jakub Warmuz
39aff967a5
Revocation: expect application/json (boulder#771).
2015-09-10 20:17:13 +00:00
Jakub Warmuz
cc607480ae
acme: fetch_chain for multiple up links
2015-09-10 20:12:32 +00:00
Jakub Warmuz
94fa851b01
Merge branch 'acme-directory' into revocation
2015-09-09 20:45:57 +00:00
Jakub Warmuz
817ab468d1
py3 compat: str(exc) instead of exc.message
2015-09-09 20:21:33 +00:00
Jakub Warmuz
302e3ceb7d
Revocation: integration testable
2015-09-09 20:04:28 +00:00
Jakub Warmuz
bf754b6302
Add ACME Directory Resource
2015-09-09 17:22:20 +00:00
James Kasten
d7b1af2a31
Merge pull request #750 from hlieberman/fix-spelling
...
Fix minor spelling errors in the code.
2015-09-09 00:00:03 -04:00
James Kasten
01b1172df2
Merge pull request #751 from hlieberman/urllib3-injection
...
Make urllib3 injection more version specific.
2015-09-08 23:55:42 -04:00
James Kasten
b0085cd47b
Merge pull request #704 from kuba/py3
...
Bring back Python 3 support for acme
2015-09-08 23:54:23 -04:00
Harlan Lieberman-Berg
10460eb285
Add no cover pragma, URL for documentation.
2015-09-06 13:58:50 -04:00
Jakub Warmuz
dbf5d086bd
v4 DNS challenge
2015-09-06 11:47:56 +00:00
Jakub Warmuz
89c99a1f34
pep8 acme
2015-09-06 09:19:26 +00:00
Jakub Warmuz
138f1d1b28
lint: space check for dict-separator
2015-09-06 08:30:49 +00:00
Harlan Lieberman-Berg
503afebd54
Make urllib3 injection more version specific.
2015-09-05 22:47:25 -04:00
Harlan Lieberman-Berg
dc4cc23377
Fix minor spelling errors in the code.
2015-09-05 22:35:34 -04:00
Jakub Warmuz
8163e055a1
Disable test_probe_connection_error (problems with Python 3).
2015-09-02 18:50:59 +00:00
Jakub Warmuz
c6e4c7dea1
setup.py: update/fix deps.
2015-09-01 19:57:41 +00:00
Jakub Warmuz
a74eff5fbd
Revert "Revert PR #708."
...
This reverts commit 70e311b43f
2015-08-28 06:40:19 +00:00
Jacob Hoffman-Andrews
70e311b43f
Revert PR #708 .
...
https://github.com/letsencrypt/letsencrypt/pull/708 broke the Boulder CI build
because Travis runs Ubuntu 12.04, which has an older setuptools. See
https://github.com/letsencrypt/boulder/issues/681 .
2015-08-27 13:38:32 -07:00
James Kasten
091af07c1c
Merge pull request #706 from kuba/uri-shift
...
Shift URIs around (acme-spec#134, fixes #576 ).
2015-08-27 13:53:50 -04:00
Jakub Warmuz
fc4990cf16
Fix typo
2015-08-26 21:05:08 +00:00
Jakub Warmuz
217b40379f
Merge branch 'master' into mock-2.6
2015-08-25 06:36:56 +00:00
Jakub Warmuz
5154cc92d6
Merge branch 'master' into uri-shift
2015-08-25 06:36:42 +00:00
Jakub Warmuz
7f6d4c5f84
Merge branch 'master' into py3
2015-08-25 06:35:35 +00:00
James Kasten
48467a1b38
Merge pull request #707 from kuba/log-http-req-params
...
Log HTTP request params (including contents).
2015-08-24 17:10:00 -04:00
James Kasten
8a6dfb1516
Merge pull request #703 from kuba/docs
...
Fix various Sphinx warnings, errors
2015-08-24 17:08:53 -04:00
Jakub Warmuz
089528ed2a
Fix ambiguous cross-references in docs
2015-08-22 14:37:32 +00:00
Jakub Warmuz
e9c79edb19
Fix various Sphinx build problems
2015-08-22 14:30:59 +00:00
Jakub Warmuz
60aa1b2ecb
Log HTTP request params (including contents).
2015-08-22 12:36:52 +00:00
Jakub Warmuz
79853fa098
Shift URIs around (acme-spec#134, fixes #576 ).
2015-08-22 12:20:38 +00:00
Jakub Warmuz
a7df468347
mock<1.1.0 only for py2.6.
2015-08-22 11:01:28 +00:00
Harlan Lieberman-Berg
bc530e457e
Fix minor misspelling error.
2015-08-22 02:51:24 +02:00
Jakub Warmuz
4d30ec07fb
Update test name to match acme v04 semantics.
2015-08-19 20:38:03 +00:00
Jakub Warmuz
504b290726
Fix py3 compat in acme.
2015-08-19 20:35:30 +00:00
Brad Warren
0aaf9f2be7
Updated tests to update challenge changes
2015-08-13 18:41:49 -07:00
Brad Warren
14c150ae17
Fixed unit tests and lint
2015-08-05 15:39:31 -07:00
Jakub Warmuz
eacf658003
py3 compat
2015-07-31 22:45:48 +00:00
Jakub Warmuz
68d34391dd
Fix test_good_token
2015-07-31 22:15:56 +00:00
Jakub Warmuz
57110f4c18
acme: simplehttp v04
2015-07-31 21:30:08 +00:00
Jakub Warmuz
ceed8a71c1
DeserializationError: more meaningful message
2015-07-31 21:19:07 +00:00
Jakub Warmuz
ca5823ffd8
acme: progress with v03 Simple HTTP challenge.
2015-07-29 20:58:54 +00:00
Jakub Warmuz
a55991055e
Human meaningful exception message for decoding fields with minimum length.
2015-07-25 18:17:53 +00:00
Jakub Warmuz
de3b48640b
Doc fixes.
2015-07-25 15:48:14 +00:00
Jakub Warmuz
e0651ad050
Remove Recovery Token.
2015-07-25 12:00:04 +00:00
Brad Warren
83ad476a6d
Improved logging and error handling
2015-07-23 17:09:09 -07:00
Brad Warren
c927f0c89a
Finished basic Apache test framework
2015-07-22 18:25:09 -07:00
Jakub Warmuz
2028c3a454
Remove obsolete comment.
2015-07-19 12:59:10 +00:00
Jakub Warmuz
00298173a2
Merge branch 'dvsni-verify' into dvsni-v03
...
Conflicts:
acme/acme/challenges.py
acme/acme/challenges_test.py
letsencrypt/achallenges.py
letsencrypt/crypto_util.py
letsencrypt/plugins/common.py
letsencrypt/tests/achallenges_test.py
2015-07-18 17:58:22 +00:00
Jakub Warmuz
61e19c9882
DVSNIResponse.gen_cert, fix verify_cert, add tests.
2015-07-18 12:54:33 +00:00
Jakub Warmuz
f3538cd114
Add comment about _DEFAULT_DVSNI_SSL_METHOD.
2015-07-18 07:33:46 +00:00
Jakub Warmuz
33d7f205fa
Merge remote-tracking branch 'github/letsencrypt/master' into dvsni-verify
...
Conflicts:
acme/acme/challenges.py
2015-07-18 06:51:26 +00:00
