A new pgstats entry is created as a two-step process:
- The entry is looked at in the shared hashtable of pgstats, and is
inserted if not found.
- When not found and inserted, its fields are then initialized. This
part include a DSA chunk allocation for the stats data of the new entry.
As currently coded, if the DSA chunk allocation fails due to an
out-of-memory failure, an ERROR is generated, leaving in the pgstats
shared hashtable an inconsistent entry due to the first step, as the
entry has already been inserted in the hashtable. These broken entries
can then be found by other backends, crashing them.
There are only two callers of pgstat_init_entry(), when loading the
pgstats file at startup and when creating a new pgstats entry. This
commit changes pgstat_init_entry() so as we use dsa_allocate_extended()
with DSA_ALLOC_NO_OOM, making it return NULL on allocation failure
instead of failing. This way, a backend failing an entry creation can
take appropriate cleanup actions in the shared hashtable before throwing
an error. Currently, this means removing the entry from the shared
hashtable before throwing the error for the allocation failure.
Out-of-memory errors unlikely happen in the wild, and we do not bother
with back-patches when these are fixed, usually. However, the problem
dealt with here is a degree worse as it breaks the shared memory state
of pgstats, impacting other processes that may look at an inconsistent
entry that a different process has failed to create.
Author: Mikhail Kot <mikhail.kot@databricks.com>
Discussion: https://postgr.es/m/CAAi9E7jELo5_-sBENftnc2E8XhW2PKZJWfTC3i2y-GMQd2bcqQ@mail.gmail.com
Backpatch-through: 15
When executing a MERGE UPDATE action, if there is more than one
concurrent update of the target row, the lock-and-retry code would
sometimes incorrectly identify the latest version of the target tuple,
leading to incorrect results.
This was caused by using the ctid field from the TM_FailureData
returned by table_tuple_lock() in a case where the result was TM_Ok,
which is unsafe because the TM_FailureData struct is not guaranteed to
be fully populated in that case. Instead, it should use the tupleid
passed to (and updated by) table_tuple_lock().
To reduce the chances of similar errors in the future, improve the
commentary for table_tuple_lock() and TM_FailureData to make it
clearer that table_tuple_lock() updates the tid passed to it, and most
fields of TM_FailureData should not be relied on in non-failure cases.
An exception to this is the "traversed" field, which is set in both
success and failure cases.
Reported-by: Dmitry <dsy.075@yandex.ru>
Author: Yugo Nagata <nagata@sraoss.co.jp>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/1570d30e-2b95-4239-b9c3-f7bf2f2f8556@yandex.ru
Backpatch-through: 15
SlruRecentlyUsed() is an inline function since 53c2a97a92, not a
macro. The description of long_segment_names was missing at the top of
SimpleLruInit(), part forgotten in 4ed8f0913b.
Author: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/aLpBLMOYwEQkaleF@jrouhaud
Backpatch-through: 17
When executing a MERGE, check that the target relation supports all
actions mentioned in the MERGE command. Specifically, check that it
has a REPLICA IDENTITY if it publishes updates or deletes and the
MERGE command contains update or delete actions. Failing to do this
can silently break replication.
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Tested-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/OS3PR01MB57180C87E43A679A730482DF94B62@OS3PR01MB5718.jpnprd01.prod.outlook.com
Backpatch-through: 15
If an INSERT has an ON CONFLICT DO UPDATE clause, the executor must
check that the target relation supports UPDATE as well as INSERT. In
particular, it must check that the target relation has a REPLICA
IDENTITY if it publishes updates. Formerly, it was not doing this
check, which could lead to silently breaking replication.
Fix by adding such a check to CheckValidResultRel(), which requires
adding a new onConflictAction argument. In back-branches, preserve ABI
compatibility by introducing a wrapper function with the original
signature.
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Tested-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/OS3PR01MB57180C87E43A679A730482DF94B62@OS3PR01MB5718.jpnprd01.prod.outlook.com
Backpatch-through: 13
The counters saved from pgWalUsage, used for the difference calculations
when flushing the backend WAL stats, are updated when calling
pgstat_flush_backend() under PGSTAT_BACKEND_FLUSH_WAL, and not
pgstat_report_wal(). The comment updated in this commit referenced the
latter, but it is perfectly OK to flush the backend stats independently
of the WAL stats.
Noticed while looking at this area of the code, introduced by
76def4cdd7 as a copy-pasto.
Backpatch-through: 18
SubPlan nodes are typically built very early, before any RelOptInfos
have been constructed for the parent query level. As a result, the
simple_rel_array in the parent root has not yet been initialized.
Currently, during cost estimation of a SubPlan's testexpr, we may call
examine_variable() to look up statistical data about the expressions.
This can lead to "no relation entry for relid" errors.
To fix, pass root as NULL to cost_qual_eval() in cost_subplan(), since
the root does not yet contain enough information to safely consult
statistics.
One exception is SubPlan nodes built for the initplans of MIN/MAX
aggregates from indexes. In this case, having a NULL root is safe
because testexpr will be NULL. Additionally, an initplan will by
definition not consult anything from the parent plan.
Backpatch to all supported branches. Although the reported call path
that triggers this error is not reachable prior to v17, there's no
guarantee that other code paths -- especially in extensions -- could
not encounter the same issue when cost_qual_eval() is called with a
root that lacks a valid simple_rel_array. The test case is not
included in pre-v17 branches though.
Bug: #19037
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Diagnosed-by: Tom Lane <tgl@sss.pgh.pa.us>
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/19037-3d1c7bb553c7ce84@postgresql.org
Backpatch-through: 13
SLRU bank locks are referred as "bank locks" or "SLRU bank locks" in the
code comments. The comments updated in this commit use the latter term.
Oversight in 53c2a97a92, that has replaced the single ControlLock by
the bank control locks.
Author: Julien Rouhaud <julien.rouhaud@free.fr>
Discussion: https://postgr.es/m/aLUT2UO8RjJOzZNq@jrouhaud
Backpatch-through: 17
It's possible that if the only live partition is concurrently dropped
and try_table_open() fails, that the bms_del_member() will pfree the
live_parts Bitmapset. Since the bms_del_member() call does not assign
the result back to the live_parts local variable, the while loop could
segfault as that variable would still reference the pfree'd Bitmapset.
Backpatch to 15. 52f3de874 was backpatched to 14, but there's no
bms_del_member() there due to live_parts not yet existing in RelOptInfo in
that version. Technically there's no bug in version 15 as
bms_del_member() didn't pfree when the set became empty prior to
00b41463c (from v16). Applied to v15 anyway to keep the code similar and
to avoid the bad coding pattern.
Author: Bernd Reiß <bd_reiss@gmx.at>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/6b88f27a-c45c-4826-8e37-d61a04d90182@gmx.at
Backpatch-through: 15
I think the error message for a different condition was inadvertently
copied.
This problem seems to have been introduced by commit a4d75c86bf.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Reported-by: jian he <jian.universality@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Backpatch-through: 14
Discussion: https://postgr.es/m/CACJufxEZ48toGH0Em_6vdsT57Y3L8pLF=DZCQ_gCii6=C3MeXw@mail.gmail.com
For a child relation, we should not assume that its parent's
unique-ified relation (or unique-ified path in v18) always exists. In
cases where all RHS columns that need to be unique-ified are equated
to constants, the unique-ified relation/path for the parent table is
not built, as there are no columns left to unique-ify. Failing to
account for this can result in a SIGSEGV crash during planning.
This patch checks whether the parent's unique-ified relation or path
exists and skips unique-ification of the child relation if it does
not.
Author: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/CAMbWs49MOdLW2c+qbLHHBt8VBu=4ONpM91D19=AWeW93eFUF6A@mail.gmail.com
Backpatch-through: 18
Previously, we used LW_EXCLUSIVE in several places despite only reading
WalSummarizerCtl fields. This patch reduces the lock level to LW_SHARED
where we are only reading the shared fields.
Backpatch to 17, where wal summarization was introduced.
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://postgr.es/m/CAD21AoDdKhf_9oriEYxY-JCdF+Oe_muhca3pcdkMEdBMzyHyKw@mail.gmail.com
Backpatch-through: 17
One mechanism we have for implementing semi-joins is to de-duplicate
the output of the RHS and then treat the join as a plain inner join.
Initial construction of the join's SpecialJoinInfo identifies the
RHS columns that need to be de-duplicated, but later we may find that
some of those don't need to be handled explicitly, either because
they're known to be constant or because they are redundant with some
previous column.
Up to now, while sort-based de-duplication handled such cases well,
hash-based de-duplication didn't: we'd still hash on all of the
originally-identified columns. This is probably not a very big
deal performance-wise, but in the wake of commit a3179ab69 it can
cause planner errors. That happens when join elimination causes
recalculation of variables' attr_needed bitmapsets, and we decide
that a variable mentioned in a semijoin clause doesn't need to be
propagated up to the join level anymore.
There are a number of ways we could slice the blame for this, but the
only fix that doesn't result in pessimizing plans for loosely-related
cases is to be more careful about not hashing columns we don't
actually need to de-duplicate. We can install that consideration
into create_unique_paths in master, or the predecessor code in
create_unique_path in v18, without much refactoring.
(As follow-up work, it might be a good idea to look at more-invasive
refactoring, in hopes of preventing other bugs in this area. But
with v18 release so close, there's not time for that now, nor would
we be likely to want to put such refactoring into v18 anyway.)
Reported-by: Sergey Soloviev <sergey.soloviev@tantorlabs.ru>
Diagnosed-by: Richard Guo <guofenglinux@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/1fd1a421-4609-4d46-a1af-ab74d5de504a@tantorlabs.ru
Backpatch-through: 18
During an investigation into rather odd aio related errors on macos, observed
by Alexander and Konstantin, we started to wonder if bitfield access is
related to the error. At the moment it looks like it is related, we cannot
reproduce the failures when replacing the bitfields. In addition, the problem
can only be reproduced with some compiler [versions] and not everyone has been
able to reproduce the issue.
The observed problem is that, very rarely, PgAioHandle->{state,target} are in
an inconsistent state, after having been checked to be in a valid state not
long before, triggering an assertion failure. Unfortunately, this could be
caused by wrong compiler code generation or somehow of missing memory barriers
- we don't really know. In theory there should not be any concurrent write
access to the handle in the state the bug is triggered, as the handle was idle
and is just being initialized.
Separately from the bug, we observed that at least gcc and clang generate
rather terrible code for the bitfield access. Even if it's not clear if the
observed assertion failure is actually caused by the bitfield somehow, the bad
code generation alone is sufficient reason to stop using bitfields.
Therefore, replace the enum bitfields with uint8s and instead cast in each
switch statement.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reported-by: Konstantin Knizhnik <knizhnik@garret.ru>
Discussion: https://postgr.es/m/1500090.1745443021@sss.pgh.pa.us
Backpatch-through: 18
Commit d31bbfb659 removed the comment at objectNamesToOids() that
there is no locking, because that commit added locking. But to fix
all the problems, we'd still need a stronger lock. So put the comment
back with more a detailed explanation.
Co-authored-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://www.postgresql.org/message-id/flat/bf72b82c-124d-4efa-a484-bb928e9494e4@eisentraut.org
This patch fixes a bug in how 'load_external_function' handles
'$libdir/ prefixes in module paths.
Previously, 'load_external_function' would unconditionally strip
'$libdir/' from the beginning of the 'filename' string. This caused
an issue when the path was nested, such as "$libdir/nested/my_lib".
Stripping the prefix resulted in a path of "nested/my_lib", which
would fail to be found by the expand_dynamic_library_name function
because the original '$libdir' macro was removed.
To fix this, the code now checks for the presence of an additional
directory separator ('/' or '\') after the '$libdir/' prefix. The
prefix is only stripped if the remaining string does not contain a
separator. This ensures that simple filenames like '"$libdir/my_lib"'
are correctly handled, while nested paths are left intact for
'expand_dynamic_library_name' to process correctly.
Reported-by: Dilip Kumar <dilipbalaut@gmail.com>
Co-authored-by: Matheus Alcantara <matheusssilv97@gmail.com>
Co-authored-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Srinath Reddy Sadipiralla <srinath2133@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAFiTN-uKNzAro4tVwtJhF1UqcygfJ%2BR%2BRL%3Db-_ZMYE3LdHoGhA%40mail.gmail.com
Commit 4b754d6c1 introduced the concept of an excludeOnly scan key,
which cannot select matching index entries but can reject
non-matching tuples, for example a tsquery such as '!term'. There are
poorly-documented assumptions that such scan keys do not appear as the
first scan key. ginNewScanKey did nothing to ensure that, however,
with the result that certain GIN index searches could go into an
infinite loop while apparently-equivalent queries with the clauses in
a different order were fine.
Fix by teaching ginNewScanKey to place all excludeOnly scan keys
after all not-excludeOnly ones. So far as we know at present,
it might be sufficient to avoid the case where the very first
scan key is excludeOnly; but I'm not very convinced that there
aren't other dependencies on the ordering.
Bug: #19031
Reported-by: Tim Wood <washwithcare@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/19031-0638148643d25548@postgresql.org
Backpatch-through: 13
The CHECK_FOR_INTERRUPTS call in gingetbitmap turns out to be
inadequate to prevent a long uninterruptible loop, because
we now know a case where looping occurs within scanGetItem.
While the next patch will fix the bug that caused that, it
seems foolish to assume that no similar patterns are possible.
Let's do the CFI within scanGetItem's retry loop, instead.
This demonstrably allows canceling out of the loop exhibited
in bug #19031.
Bug: #19031
Reported-by: Tim Wood <washwithcare@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/19031-0638148643d25548@postgresql.org
Backpatch-through: 13
The Self-Join Elimination SJE feature messes up keeping and removing RowMark's
in remove_self_joins_one_group(). That didn't lead to user-level error,
because the planned RowMark is only used to reference a rtable entry in later
execution stages. An RTE entry for keeping and removing relations is
identical and refers to the same relation OID.
To reduce confusion and prevent future issues, this commit cleans up the code
and fixes the incorrect behaviour. Furthermore, it includes sanity checks in
setrefs.c on existing non-null RTE and RelOptInfo entries for each RowMark.
Discussion: https://postgr.es/m/18c6bd6c-6d2a-419a-b0da-dfedef34b585%40gmail.com
Author: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Greg Sabino Mullane <htamfids@gmail.com>
Backpatch-through: 18
Rename inner and outer to rrel and krel, respectively, to highlight their
connection to r and k indexes. For the same reason, rename imark and omark
to rmark and kmark.
Discussion: https://postgr.es/m/18c6bd6c-6d2a-419a-b0da-dfedef34b585%40gmail.com
Author: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Greg Sabino Mullane <htamfids@gmail.com>
Backpatch-through: 18
This reverts commit bc22dc0e0d.
It appears that conditional variables are not suitable for use inside
critical sections. If WaitLatch()/WaitEventSetWaitBlock() face postmaster
death, they exit, releasing all locks instead of PANIC. In certain
situations, this leads to data corruption.
Reported-by: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/B3C69B86-7F82-4111-B97F-0005497BB745%40yandex-team.ru
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Reviewed-by: Aleksander Alekseev <aleksander@tigerdata.com>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Yura Sokolov <y.sokolov@postgrespro.ru>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Backpatch-through: 18
Commit 1585ff7387 changed GetTransactionSnapshot() to throw an error
if it's called during logical decoding, instead of returning the
historic snapshot. I made that change for extra protection, because a
historic snapshot can only be used to access catalog tables while
GetTransactionSnapshot() is usually called when you're executing
arbitrary queries. You might get very subtle visibility problems if
you tried to use the historic snapshot for arbitrary queries.
There's no built-in code in PostgreSQL that calls
GetTransactionSnapshot() during logical decoding, but it turns out
that the pglogical extension does just that, to evaluate row filter
expressions. You would get weird results if the row filter runs
arbitrary queries, but it is sane as long as you don't access any
non-catalog tables. Even though there are no checks to enforce that in
pglogical, a typical row filter expression does not access any tables
and works fine. Accessing tables marked with the user_catalog_table =
true option is also OK.
To fix pglogical with row filters, and any other extensions that might
do similar things, revert GetTransactionSnapshot() to return a
historic snapshot during logical decoding.
To try to still catch the unsafe usage of historic snapshots, add
checks in heap_beginscan() and index_beginscan() to complain if you
try to use a historic snapshot to scan a non-catalog table. We're very
close to the version 18 release however, so add those new checks only
in master.
Backpatch-through: 18
Reported-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://www.postgresql.org/message-id/20250809222338.cc.nmisch@google.com
Temporary relations may share the same RelFileNumber with a permanent
relation, or other temporary relations associated with other sessions.
Being able to uniquely identify a temporary relation would require
RelidByRelfilenumber() to know about the proc number of the temporary
relation it wants to identify, something it is not designed for since
its introduction in f01d1ae3a1.
There are currently three callers of RelidByRelfilenumber():
- autoprewarm.
- Logical decoding, reorder buffer.
- pg_filenode_relation(), that attempts to find a relation OID based on
a tablespace OID and a RelFileNumber.
This makes the situation problematic particularly for the first two
cases, leading to the possibility of random ERRORs due to
inconsistencies that temporary relations can create in the cache
maintained by RelidByRelfilenumber(). The third case should be less of
an issue, as I suspect that there are few direct callers of
pg_filenode_relation().
The window where the ERRORs are happen is very narrow, requiring an OID
wraparound to create a lookup conflict in RelidByRelfilenumber() with a
temporary table reusing the same OID as another relation already cached.
The problem is easier to reach in workloads with a high OID consumption
rate, especially with a higher number of temporary relations created.
We could get pg_filenode_relation() and RelidByRelfilenumber() to work
with temporary relations if provided the means to identify them with an
optional proc number given in input, but the years have also shown that
we do not have a use case for it, yet. Note that this could not be
backpatched if pg_filenode_relation() needs changes. It is simpler to
ignore temporary relations.
Reported-by: Shenhao Wang <wangsh.fnst@fujitsu.com>
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-By: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Takamichi Osumi <osumi.takamichi@fujitsu.com>
Reviewed-By: Michael Paquier <michael@paquier.xyz>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reported-By: Shenhao Wang <wangsh.fnst@fujitsu.com>
Discussion: https://postgr.es/m/bbaaf9f9-ebb2-645f-54bb-34d6efc7ac42@fujitsu.com
Backpatch-through: 13
The result of pgaio_io_get_id() was being assigned to a mix of int and
uint32 variables. This fixes it to use int consistently, which seems
the most correct. Also change the queue empty special value in
method_worker.c to -1 from UINT32_MAX.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/70c784b3-f60b-4652-b8a6-75e5f051243e%40eisentraut.org
If we error out during execution of a SQL-language function, we will
often leave behind non-null pointers in its SQLFunctionCache's cplan
and eslist fields. This is problematic if the SQLFunctionCache is
re-used, because those pointers will point at resources that were
released during error cleanup. This problem escaped detection so far
because ordinarily we won't re-use an FmgrInfo+SQLFunctionCache struct
after a query error. However, in the rather improbable case that
someone implements an opclass support function in SQL language, there
will be long-lived FmgrInfos for it in the relcache, and then the
problem is reachable after the function throws an error.
To fix, add a flag to SQLFunctionCache that tracks whether execution
escapes out of fmgr_sql, and clear out the relevant fields during
init_sql_fcache if so. (This is going to need more thought if we ever
try to share FMgrInfos across threads; but it's very far from being
the only problem such a project will encounter, since many functions
regard fn_extra as being query-local state.)
This broke at commit 0313c5dc6; before that we did not try to re-use
SQLFunctionCache state across calls. Hence, back-patch to v18.
Bug: #19026
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/19026-90aed5e71d0c8af3@postgresql.org
Backpatch-through: 18
Some replication slot manipulations (logical decoding via SQL,
advancing) were failing an assertion when releasing a slot in
single-user mode, because active_pid was not set in a ReplicationSlot
when its slot is acquired.
ReplicationSlotAcquire() has some logic to be able to work with the
single-user mode. This commit sets ReplicationSlot->active_pid to
MyProcPid, to let the slot-related logic fall-through, considering the
single process as the one holding the slot.
Some TAP tests are added for various replication slot functions with the
single-user mode, while on it, for slot creation, drop, advancing, copy
and logical decoding with multiple slot types (temporary, physical vs
logical). These tests are skipped on Windows, as direct calls of
postgres --single would fail on permission failures. There is no
platform-specific behavior that needs to be checked, so living with this
restriction should be fine. The CI is OK with that, now let's see what
the buildfarm tells.
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Mutaamba Maasha <maasha@gmail.com>
Discussion: https://postgr.es/m/OSCPR01MB14966ED588A0328DAEBE8CB25F5FA2@OSCPR01MB14966.jpnprd01.prod.outlook.com
Backpatch-through: 13
The DROP SUBSCRIPTION command performs several operations: it stops the
subscription workers, removes subscription-related entries from system
catalogs, and deletes the replication slot on the publisher server.
Previously, this command acquired an AccessExclusiveLock on
pg_subscription before initiating these steps.
However, while holding this lock, the command attempts to connect to the
publisher to remove the replication slot. In cases where the connection is
made to a newly created database on the same server as subscriber, the
cache-building process during connection tries to acquire an
AccessShareLock on pg_subscription, resulting in a self-deadlock.
To resolve this issue, we reduce the lock level on pg_subscription during
DROP SUBSCRIPTION from AccessExclusiveLock to RowExclusiveLock. Earlier,
the higher lock level was used to prevent the launcher from starting a new
worker during the drop operation, as a restarted worker could become
orphaned.
Now, instead of relying on a strict lock, we acquire an AccessShareLock on
the specific subscription being dropped and re-validate its existence
after acquiring the lock. If the subscription is no longer valid, the
worker exits gracefully. This approach avoids the deadlock while still
ensuring that orphan workers are not created.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 13
Discussion: https://postgr.es/m/18988-7312c868be2d467f@postgresql.org
When extracting a timestamp from a UUIDv7, a conversion from
milliseconds to microseconds was using the incorrect constant
NS_PER_US instead of US_PER_MS. Although both constants have the same
value, this fix improves code clarity by using the semantically
correct constant.
Backpatch to v18, where UUIDv7 was introduced.
Author: Erik Nordström <erik@tigerdata.com>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/CACAa4V+i07eaP6h4MHNydZeX47kkLPwAg0sqe67R=M5tLdxNuQ@mail.gmail.com
Backpatch-through: 18
This function uses an argument named "maxsize" that is only used in
assertions, being set once outside the assertion area. Recent gcc
versions with -Wunused-but-set-parameter complain about a warning when
building without assertions enabled, because of that.
In order to fix this issue, PG_USED_FOR_ASSERTS_ONLY is added to the
function argument of SerializeClientConnectionInfo(), which is the first
time we are doing so in the tree. The CI is fine with the change, but
let's see what the buildfarm has to say on the matter.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Jacob Champion <jchampion@postgresql.org>
Discussion: https://postgr.es/m/pevajesswhxafjkivoq3yvwxga77tbncghlf3gq5fvchsvfuda@6uivg25sb3nx
Backpatch-through: 16
It turns out that on some platforms (at least current macOS, NetBSD,
OpenBSD) semget(2) will return EINVAL if there is a pre-existing
semaphore set with the same key and too few semaphores. Our code
expects EEXIST in that case and treats EINVAL as a hard failure,
resulting in failure during initdb or postmaster start.
POSIX does document EINVAL for too-few-semaphores-in-set, and is
silent on its priority relative to EEXIST, so this behavior arguably
conforms to spec. Nonetheless it's quite problematic because EINVAL
is also documented to mean that nsems is greater than the system's
limit on the number of semaphores per set (SEMMSL). If that is
where the problem lies, retrying would just become an infinite loop.
To resolve this contradiction, retry after EINVAL, but also install a
loop limit that will make us give up regardless of the specific errno
after trying 1000 different keys. (1000 is a pretty arbitrary number,
but it seems like it should be sufficient.) I like this better than
the previous infinite-looping behavior, since it will also keep us out
of trouble if (say) we get EACCES due to a system-level permissions
problem rather than anything to do with a specific semaphore set.
This problem has only been observed in the field in PG 17, which uses
a higher nsems value than other branches (cf. 38da05346, 810a8b1c8).
That makes it possible to get the failure if a new v17 postmaster
has a key collision with an existing postmaster of another branch.
In principle though, we might see such a collision against a semaphore
set created by some other application, in which case all branches are
vulnerable on these platforms. Hence, backpatch.
Reported-by: Gavin Panella <gavinpanella@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CALL7chmzY3eXHA7zHnODUVGZLSvK3wYCSP0RmcDFHJY8f28Q3g@mail.gmail.com
Backpatch-through: 13
Commit e2d4ef8de8 (the fix for CVE-2017-7484) added security checks
to the selectivity estimation functions to prevent them from running
user-supplied operators on data obtained from pg_statistic if the user
lacks privileges to select from the underlying table. In cases
involving inheritance/partitioning, those checks were originally
performed against the child RTE (which for plain inheritance might
actually refer to the parent table). Commit 553d2ec271 then extended
that to also check the parent RTE, allowing access if the user had
permissions on either the parent or the child. It turns out, however,
that doing any checks using the child RTE is incorrect, since
securityQuals is set to NULL when creating an RTE for an inheritance
child (whether it refers to the parent table or the child table), and
therefore such checks do not correctly account for any RLS policies or
security barrier views. Therefore, do the security checks using only
the parent RTE. This is consistent with how RLS policies are applied,
and the executor's ACL checks, both of which use only the parent
table's permissions/policies. Similar checks are performed in the
extended stats code, so update that in the same way, centralizing all
the checks in a new function.
In addition, note that these checks by themselves are insufficient to
ensure that the user has access to the table's data because, in a
query that goes via a view, they only check that the view owner has
permissions on the underlying table, not that the current user has
permissions on the view itself. In the selectivity estimation
functions, there is no easy way to navigate from underlying tables to
views, so add permissions checks for all views mentioned in the query
to the planner startup code. If the user lacks permissions on a view,
a permissions error will now be reported at planner-startup, and the
selectivity estimation functions will not be run.
Checking view permissions at planner-startup in this way is a little
ugly, since the same checks will be repeated at executor-startup.
Longer-term, it might be better to move all the permissions checks
from the executor to the planner so that permissions errors can be
reported sooner, instead of creating a plan that won't ever be run.
However, such a change seems too far-reaching to be back-patched.
Back-patch to all supported versions. In v13, there is the added
complication that UPDATEs and DELETEs on inherited target tables are
planned using inheritance_planner(), which plans each inheritance
child table separately, so that the selectivity estimation functions
do not know that they are dealing with a child table accessed via its
parent. Handle that by checking access permissions on the top parent
table at planner-startup, in the same way as we do for views. Any
securityQuals on the top parent table are moved down to the child
tables by inheritance_planner(), so they continue to be checked by the
selectivity estimation functions.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Noah Misch <noah@leadboat.com>
Backpatch-through: 13
Security: CVE-2025-8713
The internal queue of buffers could become corrupted in a rare edge case
that failed to invalidate an entry, causing a stale buffer to be
"forwarded" to StartReadBuffers(). This is a simple fix for the
immediate problem.
A small API change might be able to remove this and related fragility
entirely, but that will have to wait a bit.
Defect in commit ed0b87ca.
Bug: 19006
Backpatch-through: 18
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/19006-80fcaaf69000377e%40postgresql.org
This function is called from ATExecAttachPartition/ATExecAddInherit,
which prevent tables with row-level triggers with transition tables from
becoming partitions or inheritance children, to check if there is such a
trigger on the given table, but failed to check if a found trigger is
row-level, causing the caller functions to needlessly prevent a table
with only a statement-level trigger with transition tables from becoming
a partition or inheritance child. Repair.
Oversight in commit 501ed02cf.
Author: Etsuro Fujita <etsuro.fujita@gmail.com>
Discussion: https://postgr.es/m/CAPmGK167mXzwzzmJ_0YZ3EZrbwiCxtM1vogH_8drqsE6PtxRYw%40mail.gmail.com
Backpatch-through: 13
Commit 9e6104c66 disallowed transition tables on foreign tables, but
failed to account for cases where a foreign table is a child table of a
partitioned/inherited table on which transition tables exist, leading to
incorrect transition tuples collected from such foreign tables for
queries on the parent table triggering transition capture. This
occurred not only for inherited UPDATE/DELETE but for partitioned INSERT
later supported by commit 3d956d956, which should have handled it at
least for the INSERT case, but didn't.
To fix, modify ExecAR*Triggers to throw an error if the given relation
is a foreign table requesting transition capture. Also, this commit
fixes make_modifytable so that in case of an inherited UPDATE/DELETE
triggering transition capture, FDWs choose normal operations to modify
child foreign tables, not DirectModify; which is needed because they
would otherwise skip the calls to ExecAR*Triggers at execution, causing
unexpected behavior.
Author: Etsuro Fujita <etsuro.fujita@gmail.com>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CAPmGK14QJYikKzBDCe3jMbpGENnQ7popFmbEgm-XTNuk55oyHg%40mail.gmail.com
Backpatch-through: 13
Dropping twice a pgstats entry should not happen, and the error report
generated was missing the "generation" counter (tracking when an entry
is reused) that has been added in 818119afcc.
Like d92573adcb, backpatch down to v15 where this information is
useful to have, to gather more information from instances where the
problem shows up. A report has shown that this error path has been
reached on a standby based on 17.3, for a relation stats entry and an
OID close to wraparound.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/CAN4RuQvYth942J2+FcLmJKgdpq6fE5eqyFvb_PuskxF2eL=Wzg@mail.gmail.com
Backpatch-through: 15
Use Min(NBuffers, MAX_CHECKPOINT_REQUESTS) instead of NBuffers in
CheckpointerShmemSize() to match the actual array size limit set in
CheckpointerShmemInit(). This prevents wasting shared memory when
NBuffers > MAX_CHECKPOINT_REQUESTS. Also, fix the comment.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1439188.1754506714%40sss.pgh.pa.us
Author: Xuneng Zhou <xunengzhou@gmail.com>
Co-authored-by: Alexander Korotkov <aekorotkov@gmail.com>
The code used a PG_RETURN_TIMESTAMPTZ() where the return type is
TimestampTz and not a Datum.
On 64-bit systems, there is no effect since this just ends up casting
64-bit integers back and forth. On 32-bit systems, timestamptz is
pass-by-reference. PG_RETURN_TIMESTAMPTZ() allocates new memory and
returns the address, meaning that the caller could interpret this as a
timestamp value.
The effect is using "date_trunc(..., 'infinity'::timestamptz) will
return random values (instead of the correct return value 'infinity').
Bug introduced in commit d85ce012f9.
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2d320b6f-b4af-4fbc-9eec-5d0fa15d187b@eisentraut.org
Discussion: https://postgr.es/m/4bf60a84-2862-4a53-acd5-8eddf134a60e@eisentraut.org
Backpatch-through: 18
These were introduced (commit efdc7d7475) at the same time as we were
moving to using the standard inttypes.h format macros (commit
a0ed19e0a9). It doesn't seem useful to keep a new already-deprecated
interface like this with only a few users, so remove the new symbols
again and have the callers use PRIx64.
(Also, INT64_HEX_FORMAT was kind of a misnomer, since hex formats all
use unsigned types.)
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/0ac47b5d-e5ab-4cac-98a7-bdee0e2831e4%40eisentraut.org
The result of "DirectFunctionCall1(numeric_float8, d)" is already in
Datum form, but the code was incorrectly applying PG_RETURN_FLOAT8()
to it. On machines where float8 is pass-by-reference, this would
result in complete garbage, since an unpredictable pointer value
would be treated as an integer and then converted to float. It's not
entirely clear how much of a problem would ensue on 64-bit hardware,
but certainly interpreting a float8 bitpattern as uint64 and then
converting that to float isn't the intended behavior.
As luck would have it, even the complete-garbage case doesn't break
BRIN indexes, since the results are only used to make choices about
how to merge values into ranges: at worst, we'd make poor choices
resulting in an inefficient index. Doubtless that explains the lack
of field complaints. However, users with BRIN indexes that use the
numeric_minmax_multi_ops opclass may wish to reindex in hopes of
making their indexes more efficient.
Author: Peter Eisentraut <peter@eisentraut.org>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2093712.1753983215@sss.pgh.pa.us
Backpatch-through: 14
During CREATE DATABASE, if changing the locale provider, require that
a new locale is specified rather than trying to reinterpret the
template's locale using the new provider.
This only affects the behavior when the template uses the builtin
provider and CREATE DATABASE specifies the ICU provider without
specifying the locale. Previously, that may have succeeded due to
loose validation by ICU, whereas now that will cause an error. Because
it can cause an error, backport only to unreleased versions.
Discussion: https://postgr.es/m/5038b33a6dc639009f4b3d43fa6ae0c5ba9e04f7.camel@j-davis.com
Backpatch-through: 18
