Previously effective_io_concurrency and maintenance_io_concurrency could not
be set above 0 on machines without fadvise support. AIO enables IO concurrency
without such support, via io_method=worker.
Currently only subsystems using the read stream API will take advantage of
this. Other users of maintenance_io_concurrency (like recovery prefetching)
which leverage OS advice directly will not benefit from this change. In those
cases, maintenance_io_concurrency will have no effect on I/O behavior.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/CAAKRu_atGgZePo=_g6T3cNtfMf0QxpvoUh5OUqa_cnPdhLd=gw@mail.gmail.com
The existing io_combine_limit can be changed by users. The new
io_max_combine_limit is fixed at server startup time, and functions as a
silent clamp on the user setting. That in itself is probably quite
useful, but the primary motivation is:
aio_init.c allocates shared memory for all asynchronous IOs including
some per-block data, and we didn't want to waste memory you'd never used
by assuming they could be up to PG_IOV_MAX. This commit already halves
the size of 'AioHandleIov' and 'AioHandleData'. A follow-up commit can
now expand PG_IOV_MAX without affecting that.
Since our GUC system doesn't support dependencies or cross-checks
between GUCs, the user-settable one now assigns a "raw" value to
io_combine_limit_guc, and the lower of io_combine_limit_guc and
io_max_combine_limit is maintained in io_combine_limit.
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier version)
Discussion: https://postgr.es/m/CA%2BhUKG%2B2T9p-%2BzM6Eeou-RAJjTML6eit1qn26f9twznX59qtCA%40mail.gmail.com
This commit just does the minimal wiring up of the AIO subsystem, added in the
next commit, to the rest of the system. The next commit contains more details
about motivation and architecture.
This commit is kept separate to make it easier to review, separating the
changes across the tree, from the implementation of the new subsystem.
We discussed squashing this commit with the main commit before merging AIO,
but there has been a mild preference for keeping it separate.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/uvrtrknj4kdytuboidbhwclo4gxhswwcpgadptsjvjqcluzmah%40brqs62irg4dt
Convert the boolean log_connections GUC into a list GUC comprised of the
connection aspects to log.
This gives users more control over the volume and kind of connection
logging.
The current log_connections options are 'receipt', 'authentication', and
'authorization'. The empty string disables all connection logging. 'all'
enables all available connection logging.
For backwards compatibility, the most common values for the
log_connections boolean are still supported (on, off, 1, 0, true, false,
yes, no). Note that previously supported substrings of on, off, true,
false, yes, and no are no longer supported.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/flat/CAAKRu_b_smAHK0ZjrnL5GRxnAVWujEXQWpLXYzGbmpcZd3nLYw%40mail.gmail.com
This commit introduces idle_replication_slot_timeout GUC that allows
inactive slots to be invalidated at the time of checkpoint. Because
checkpoints happen checkpoint_timeout intervals, there can be some lag
between when the idle_replication_slot_timeout was exceeded and when the
slot invalidation is triggered at the next checkpoint. To avoid such lags,
users can force a checkpoint to promptly invalidate inactive slots.
Note that the idle timeout invalidation mechanism is not applicable for
slots that do not reserve WAL or for slots on the standby server that are
synced from the primary server (i.e., standby slots having 'synced' field
'true'). Synced slots are always considered to be inactive because they
don't perform logical decoding to produce changes.
The slots can become inactive for a long period if a subscriber is down
due to a system error or inaccessible because of network issues. If such a
situation persists, it might be more practical to recreate the subscriber
rather than attempt to recover the node and wait for it to catch up which
could be time-consuming.
Then, external tools could create replication slots (e.g., for migrations
or upgrades) that may fail to remove them if an error occurs, leaving
behind unused slots that take up space and resources. Manually cleaning
them up can be tedious and error-prone, and without intervention, these
lingering slots can cause unnecessary WAL retention and system bloat.
As the duration of idle_replication_slot_timeout is in minutes, any test
using that would be time-consuming. We are planning to commit a follow up
patch for tests by using the injection point framework.
Author: Nisha Moond <nisha.moond412@gmail.com>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/CALj2ACW4aUe-_uFQOjdWCEN-xXoLGhmvRFnL8SNw_TZ5nJe+aw@mail.gmail.com
Discussion: https://postgr.es/m/OS0PR01MB5716C131A7D80DAE8CB9E88794FC2@OS0PR01MB5716.jpnprd01.prod.outlook.com
When pg_dump retrieves the list of database objects and performs the
data dump, there was possibility that objects are replaced with others
of the same name, such as views, and access them. This vulnerability
could result in code execution with superuser privileges during the
pg_dump process.
This issue can arise when dumping data of sequences, foreign
tables (only 13 or later), or tables registered with a WHERE clause in
the extension configuration table.
To address this, pg_dump now utilizes the newly introduced
restrict_nonsystem_relation_kind GUC parameter to restrict the
accesses to non-system views and foreign tables during the dump
process. This new GUC parameter is added to back branches too, but
these changes do not require cluster recreation.
Back-patch to all supported branches.
Reviewed-by: Noah Misch
Security: CVE-2024-7348
Backpatch-through: 12
Each of max_connections, max_worker_processes,
autovacuum_max_workers, and max_wal_senders has a GUC check hook
that verifies the sum of those GUCs does not exceed a hard-coded
limit (see the comment for MAX_BACKENDS in postmaster.h). In
general, the hooks effectively guard against egregious
misconfigurations.
However, this approach has some problems. Since these check hooks
are called as each GUC is assigned its user-specified value, only
one of the hooks will be called with all the relevant GUCs set. If
one or more of the user-specified values are less than the initial
values of the GUCs' underlying variables, false positives can
occur.
Furthermore, the error message emitted when one of the check hooks
fails is not tremendously helpful. For example, the command
$ pg_ctl -D . start -o "-c max_connections=262100 -c max_wal_senders=10000"
fails with the following error:
FATAL: invalid value for parameter "max_wal_senders": 10000
Fortunately, there is an extra copy of this check in
InitializeMaxBackends() that we can rely on, so this commit removes
the aforementioned GUC check hooks in favor of that one. It also
enhances the error message to clearly show the values of the
relevant GUCs and the hard-coded limit their sum may not exceed.
The downside of this change is that server startup progresses
further before failing due to such misconfigurations (thus taking
longer), but these failures are expected to be rare, so we don't
anticipate any real harm in practice.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/ZnMr2k-Nk5vj7T7H%40nathan
The standby_slot_names GUC allows the specification of physical standby
slots that must be synchronized before the logical walsenders associated
with logical failover slots. However, for this purpose, the GUC name is
too generic.
Author: Hou Zhijie
Reviewed-by: Bertrand Drouvot, Masahiko Sawada
Backpatch-through: 17
Discussion: https://postgr.es/m/ZnWeUgdHong93fQN@momjian.us
This patch provides a way to ensure that physical standbys that are
potential failover candidates have received and flushed changes before
the primary server making them visible to subscribers. Doing so guarantees
that the promoted standby server is not lagging behind the subscribers
when a failover is necessary.
The logical walsender now guarantees that all local changes are sent and
flushed to the standby servers corresponding to the replication slots
specified in 'standby_slot_names' before sending those changes to the
subscriber.
Additionally, the SQL functions pg_logical_slot_get_changes,
pg_logical_slot_peek_changes and pg_replication_slot_advance are modified
to ensure that they process changes for failover slots only after physical
slots specified in 'standby_slot_names' have confirmed WAL receipt for those.
Author: Hou Zhijie and Shveta Malik
Reviewed-by: Masahiko Sawada, Peter Smith, Bertrand Drouvot, Ajin Cherian, Nisha Moond, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
More precisely, what we do here is make the SLRU cache sizes
configurable with new GUCs, so that sites with high concurrency and big
ranges of transactions in flight (resp. multixacts/subtransactions) can
benefit from bigger caches. In order for this to work with good
performance, two additional changes are made:
1. the cache is divided in "banks" (to borrow terminology from CPU
caches), and algorithms such as eviction buffer search only affect
one specific bank. This forestalls the problem that linear searching
for a specific buffer across the whole cache takes too long: we only
have to search the specific bank, whose size is small. This work is
authored by Andrey Borodin.
2. Change the locking regime for the SLRU banks, so that each bank uses
a separate LWLock. This allows for increased scalability. This work
is authored by Dilip Kumar. (A part of this was previously committed as
d172b717c6f4.)
Special care is taken so that the algorithms that can potentially
traverse more than one bank release one bank's lock before acquiring the
next. This should happen rarely, but particularly clog.c's group commit
feature needed code adjustment to cope with this. I (Álvaro) also added
lots of comments to make sure the design is sound.
The new GUCs match the names introduced by bcdfa5f2e2 in the
pg_stat_slru view.
The default values for these parameters are similar to the previous
sizes of each SLRU. commit_ts, clog and subtrans accept value 0, which
means to adjust by dividing shared_buffers by 512 (so 2MB for every 1GB
of shared_buffers), with a cap of 8MB. (A new slru.c function
SimpleLruAutotuneBuffers() was added to support this.) The cap was
previously 1MB for clog, so for sites with more than 512MB of shared
memory the total memory used increases, which is likely a good tradeoff.
However, other SLRUs (notably multixact ones) retain smaller sizes and
don't support a configured value of 0. These values based on
shared_buffers may need to be revisited, but that's an easy change.
There was some resistance to adding these new GUCs: it would be better
to adjust to memory pressure automatically somehow, for example by
stealing memory from shared_buffers (where the caches can grow and
shrink naturally). However, doing that seems to be a much larger
project and one which has made virtually no progress in several years,
and because this is such a pain point for so many users, here we take
the pragmatic approach.
Author: Andrey Borodin <x4mmm@yandex-team.ru>
Author: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Amul Sul, Gilles Darold, Anastasia Lubennikova,
Ivan Lazarev, Robert Haas, Thomas Munro, Tomas Vondra,
Yura Sokolov, Васильев Дмитрий (Dmitry Vasiliev).
Discussion: https://postgr.es/m/2BEC2B3F-9B61-4C1D-9FB5-5FAB0F05EF86@yandex-team.ru
Discussion: https://postgr.es/m/CAFiTN-vzDvNz=ExGXz6gdyjtzGixKSqs0mKHMmaQ8sOSEFZ33A@mail.gmail.com
This commit adds timeout that is expected to be used as a prevention
of long-running queries. Any session within the transaction will be
terminated after spanning longer than this timeout.
However, this timeout is not applied to prepared transactions.
Only transactions with user connections are affected.
Discussion: https://postgr.es/m/CAAhFRxiQsRs2Eq5kCo9nXE3HTugsAAJdSQSmxncivebAxdmBjQ%40mail.gmail.com
Author: Andrey Borodin <amborodin@acm.org>
Author: Japin Li <japinli@hotmail.com>
Author: Junwang Zhao <zhjwpku@gmail.com>
Reviewed-by: Nikolay Samokhvalov <samokhvalov@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: bt23nguyent <bt23nguyent@oss.nttdata.com>
Reviewed-by: Yuhang Qiu <iamqyh@gmail.com>
We don't want existing slots in the old cluster to get invalidated during
the upgrade. During an upgrade, we set this variable to -1 via the command
line in an attempt to prevent such invalidations, but users have ways to
override it. This patch ensures the value is not overridden by the user.
Author: Kyotaro Horiguchi
Reviewed-by: Peter Smith, Alvaro Herrera
Discussion: http://postgr.es/m/20231027.115759.2206827438943188717.horikyota.ntt@gmail.com
* sync_method is renamed to wal_sync_method.
* sync_method_options[] is renamed to wal_sync_method_options[].
* assign_xlog_sync_method() is renamed to assign_wal_sync_method().
* The names of the available synchronization methods are now
prefixed with "WAL_SYNC_METHOD_" and have been moved into a
WalSyncMethod enum.
* PLATFORM_DEFAULT_SYNC_METHOD is renamed to
PLATFORM_DEFAULT_WAL_SYNC_METHOD, and DEFAULT_SYNC_METHOD is
renamed to DEFAULT_WAL_SYNC_METHOD.
These more descriptive names help distinguish the code for
wal_sync_method from the code for DataDirSyncMethod (e.g., the
recovery_init_sync_method configuration parameter and the
--sync-method option provided by several frontend utilities). This
change also prevents name collisions between the aforementioned
sets of code. Since this only improves the naming of internal
identifiers, there should be no behavior change.
Author: Maxim Orlov
Discussion: https://postgr.es/m/CACG%3DezbL1gwE7_K7sr9uqaCGkWhmvRTcTEnm3%2BX1xsRNwbXULQ%40mail.gmail.com
Make the primary messages more compact and make the detail messages
uniform. In initdb.c and pg_resetwal.c, use the newish
option_parse_int() to simplify some of the option parsing. For the
backend GUC wal_segment_size, add a GUC check hook to do the
verification instead of coding it in bootstrap.c. This might be
overkill, but that way the check is in the right place and it becomes
more self-documenting.
In passing, make pg_controldata use the logging API for warning
messages.
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://www.postgresql.org/message-id/flat/9939aa8a-d7be-da2c-7715-0a0b5535a1f7@eisentraut.org
An update of the GUC stats_fetch_consistency in a transaction would be
able to trigger an assertion when doing cache->snapshot. In this case,
when retrieving a pgstat entry after the switch, a new snapshot would be
rebuilt, confusing pgstat_build_snapshot() because a snapshot is already
cached with an unexpected mode ("cache").
In order to fix this problem, this commit adds a flag to force a
snapshot clear each time this GUC is changed. Some tests are added to
check, while on it.
Some optimizations in avoiding the snapshot clear should be possible
depending on what is cached and the current GUC value, I guess, but this
solution is simple, and ensures that the state of the cache is updated
each time a new pgstat entry is fetched, hence being consistent with the
level wanted by the client that has set the GUC.
Note that cache->none and snapshot->none would not cause issues, as
fetching a pgstat entry would be retrieved from shared memory on the
second attempt, however a snapshot would still be cached. Similarly,
none->snapshot and none->cache would build a new snapshot on the second
fetch attempt. Finally, snapshot->cache would cache a new snapshot on
the second attempt.
Reported-by: Alexander Lakhin
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/17804-2a118cd046f2d0e5@postgresql.org
backpatch-through: 15
Provide a way to ask the kernel to use O_DIRECT (or local equivalent)
where available for data and WAL files, to avoid or minimize kernel
caching. This hurts performance currently and is not intended for end
users yet. Later proposed work would introduce our own I/O clustering,
read-ahead, etc to replace the facilities the kernel disables with this
option.
The only user-visible change, if the developer-only GUC is not used, is
that this commit also removes the obscure logic that would activate
O_DIRECT for the WAL when wal_sync_method=open_[data]sync and
wal_level=minimal (which also requires max_wal_senders=0). Those are
non-default and unlikely settings, and this behavior wasn't (correctly)
documented. The same effect can be achieved with io_direct=wal.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGK1X532hYqJ_MzFWt0n1zt8trz980D79WbjwnT-yYLZpg%40mail.gmail.com
Add new options to the VACUUM and ANALYZE commands called
BUFFER_USAGE_LIMIT to allow users more control over how large to make the
buffer access strategy that is used to limit the usage of buffers in
shared buffers. Larger rings can allow VACUUM to run more quickly but
have the drawback of VACUUM possibly evicting more buffers from shared
buffers that might be useful for other queries running on the database.
Here we also add a new GUC named vacuum_buffer_usage_limit which controls
how large to make the access strategy when it's not specified in the
VACUUM/ANALYZE command. This defaults to 256KB, which is the same size as
the access strategy was prior to this change. This setting also
controls how large to make the buffer access strategy for autovacuum.
Per idea by Andres Freund.
Author: Melanie Plageman
Reviewed-by: David Rowley
Reviewed-by: Andres Freund
Reviewed-by: Justin Pryzby
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/20230111182720.ejifsclfwymw2reb@awork3.anarazel.de
guc.c has grown to be one of our largest .c files, making it
a bottleneck for compilation. It's also acquired a bunch of
knowledge that'd be better kept elsewhere, because of our not
very good habit of putting variable-specific check hooks here.
Hence, split it up along these lines:
* guc.c itself retains just the core GUC housekeeping mechanisms.
* New file guc_funcs.c contains the SET/SHOW interfaces and some
SQL-accessible functions for GUC manipulation.
* New file guc_tables.c contains the data arrays that define the
built-in GUC variables, along with some already-exported constant
tables.
* GUC check/assign/show hook functions are moved to the variable's
home module, whenever that's clearly identifiable. A few hard-
to-classify hooks ended up in commands/variable.c, which was
already a home for miscellaneous GUC hook functions.
To avoid cluttering a lot more header files with #include "guc.h",
I also invented a new header file utils/guc_hooks.h and put all
the GUC hook functions' declarations there, regardless of their
originating module. That allowed removal of #include "guc.h"
from some existing headers. The fallout from that (hopefully
all caught here) demonstrates clearly why such inclusions are
best minimized: there are a lot of files that, for example,
were getting array.h at two or more levels of remove, despite
not having any connection at all to GUCs in themselves.
There is some very minor code beautification here, such as
renaming a couple of inconsistently-named hook functions
and improving some comments. But mostly this just moves
code from point A to point B and deals with the ensuing
needs for #include adjustments and exporting a few functions
that previously weren't exported.
Patch by me, per a suggestion from Andres Freund; thanks also
to Michael Paquier for the idea to invent guc_funcs.c.
Discussion: https://postgr.es/m/587607.1662836699@sss.pgh.pa.us
