Most of the functions that execute XPath queries leaked the data structures
created by libxml2. This memory would not be recovered until end of
session, so it mounts up pretty quickly in any serious use of the feature.
Per report from Pavel Stehule, though this isn't his patch.
Back-patch to all supported branches.
This eliminates the need for inefficient implementions of this
functionality in both contrib/dblink and contrib/tablefunc, so remove
them. The upcoming patch implementing an in-core format() function
will also require this functionality.
In passing, add some regression tests.
Having this in src/include/port.h makes no sense, now that copydir.c lives
in src/backend/strorage rather than src/port. Along the way, remove an
obsolete comment from contrib/pg_upgrade that makes reference to the old
location.
Replace for loops in makefiles with proper dependencies. Parallel
make can now span across directories. Also, make -k and make -q work
properly.
GNU make 3.80 or newer is now required.
After much expenditure of effort, we've got this to the point where the
performance penalty is pretty minimal in typical cases.
Andrew Dunstan, reviewed by Brendan Jurd, Dean Rasheed, and Tom Lane
Various places were testing TRIGGER_FIRED_BEFORE() where what they really
meant was !TRIGGER_FIRED_AFTER(), or vice versa. This needs to be cleaned
up because there are about to be more than two possible states.
We might want to note this in the 9.1 release notes as something for
trigger authors to double-check.
For consistency's sake I also changed some places that assumed that
TRIGGER_FIRED_FOR_ROW and TRIGGER_FIRED_FOR_STATEMENT are necessarily
mutually exclusive; that's not in immediate danger of breaking, but
it's still sloppier than it should be.
Extracted from Dean Rasheed's patch for triggers on views. I'm committing
this separately since it's an identifiable separate issue, and is the
only reason for the patch to touch most of these particular files.
This is intended as infrastructure to support integration with label-based
mandatory access control systems such as SE-Linux. Further changes (mostly
hooks) will be needed, but this is a big chunk of it.
KaiGai Kohei and Robert Haas
There was an incorrect Assert in hstoreValidOldFormat(), which would cause
immediate core dumps when attempting to work with pre-9.0 hstore data,
but of course only in an assert-enabled build.
Also, ghstore_decompress() incorrectly applied DatumGetHStoreP() to a datum
that wasn't actually an hstore, but rather a ghstore (ie, a gist signature
bitstring). That used to be harmless, but could now result in misbehavior
if the hstore format conversion code happened to trigger. In reality,
since ghstore is not marked toastable (and doesn't need to be), this
function is useless anyway; we can lobotomize it down to returning the
passed-in pointer.
Both bugs found by Andrew Gierth, though this isn't exactly his proposed
patch.
functions to the core XML code. Per discussion, the former depends on
XMLOPTION while the others do not. These supersede a version previously
offered by contrib/xml2.
Mike Fowler, reviewed by Pavel Stehule
out immediately on any out-of-memory condition. It's rather pointless to
imagine that pgbench will be able to continue usefully after a malloc
failure, and in any case there were a number of unchecked mallocs.
pairs that can be handled by xslt_process().
There is much else to do here, but this patch seems useful in its own right
for as long as this code survives.
Pavel Stehule, reviewed by Mike Fowler
- Rename TSParserGetPrsid to get_ts_parser_oid.
- Rename TSDictionaryGetDictid to get_ts_dict_oid.
- Rename TSTemplateGetTmplid to get_ts_template_oid.
- Rename TSConfigGetCfgid to get_ts_config_oid.
- Rename FindConversionByName to get_conversion_oid.
- Rename GetConstraintName to get_constraint_oid.
- Add new functions get_opclass_oid, get_opfamily_oid, get_rewrite_oid,
get_rewrite_oid_without_relid, get_trigger_oid, and get_cast_oid.
The name of each function matches the corresponding catalog.
Thanks to KaiGai Kohei for the review.
Operating directly on the underlying varlena saves palloc and memcpy
overhead, which testing shows to be significant.
Extracted from a larger patch by Alexander Korotkov.
supposing that they should set SHLIB_LINK rather than LDFLAGS_SL. Since these
don't go through Makefile.shlib that was a no-op on most platforms. Also
regularize the few platform-specific Makefiles that did pay attention to
SHLIB_LINK: it seems that the real value of that is to pull in BE_DLLLIBS,
so do that instead. Per buildfarm failures on cygwin.
dblink_build_sql_insert() and related functions. Now the column numbers
are treated as logical not physical column numbers. This will provide saner
behavior in the presence of dropped columns; furthermore, if we ever get
around to allowing rearrangement of logical column ordering, the original
definition would become nearly untenable from a usability standpoint.
Per recent discussion of dblink's handling of dropped columns.
Not back-patched for fear of breaking existing applications.
columns correctly. In passing, get rid of some dead logic in the
underlying get_sql_insert() etc functions --- there is no caller that
will pass null value-arrays to them.
Per bug report from Robert Voinea.
dblink_build_sql_insert() and related functions. In particular, be sure to
reject references to dropped and out-of-range column numbers. The numbers
are still interpreted as physical column numbers, though, for backward
compatibility.
This patch replaces Joe's patch of 2010-02-03, which handled only some aspects
of the problem.
lock the target relation just once per SQL function call. The original coding
obtained and released lock several times per call. Aside from saving a
not-insignificant number of cycles, this eliminates possible race conditions
if someone tries to modify the relation's schema concurrently. Also
centralize locking and permission-checking logic.
Problem noted while investigating a trouble report from Robert Voinea --- his
problem is still to be fixed, though.
hardcoding a 'template0' check, per suggestion from Alvaro.
This might fix a problem where someone has allowed 'template0'
connections, but it is a cleaner approach even if doesn't fix the
bug.
* There is no chmod() on Windows.
* Must always use the 3-parameter version of open()
* There is no dynloader.h - but it also appears unnecessary on all platforms
* Don't include shlobj.h because it causes compile errors, and from what I can
see it's not actually used. This may need to be added back for mingw
and/or cygwin in the worst case.
cmp parameter for pg_scandir(). The code failed to support this anyway
for Sun/Windows, so pretending we could accept a parameter other than
NULL was just asking for trouble.
rather than returning NULL for some-but-not-all failures as they used to.
Remove now-redundant tests for NULL from call sites.
We had to do something about this because many call sites were failing to
check for NULL; and changing it like this seems a lot more useful and
mistake-proof than adding checks to the call sites without them.
unsatisfiable query, such as indexcol && empty_array. It should return -1
to tell GIN no scan is required; but silly typo disabled the logic for that,
resulting in unnecessary "GIN indexes do not support whole-index scans" error.
Per bug report from Jeff Trout.
Back-patch to 8.3 where the logic was introduced.
writes. The first worker still uses "pgbench_log.<pid>" for the name, but
additional workers use "pgbench_log.<pid>.<serial-number>" instead.
Reported by Greg Smith.
in versions >= 8.3). The core code is more robust and efficient than what
was there before, and this also reduces risks involved in swapping different
libxml error handler settings.
Before 8.3, there is still some risk of problems if add-on modules such as
Perl invoke libxml without setting their own error handler. Given the lack
of reports I'm not sure there's a risk in practice, so I didn't take the
step of actually duplicating the core code into older contrib/xml2 branches.
Instead I just tweaked the existing code to ensure it didn't leave a dangling
pointer to short-lived memory when throwing an error.
This involves modifying the module to have a stable ABI, that is, the
xslt_process() function still exists even without libxslt. It throws a
runtime error if called, but doesn't prevent executing the CREATE FUNCTION
call. This is a good thing anyway to simplify cross-version upgrades.
These are unnecessary and probably dangerous. I don't see any immediate
risk situations in the core XML support or contrib/xml2 itself, but there
could be issues with external uses of libxml2, and in any case it's an
accident waiting to happen.
Get rid of the code that attempted to funnel libxml2's memory allocations
into palloc. We already knew from experience with the core xml datatype
that trying to do this is simply not reliable. Unlike the core code, I
did not bother adding a lot of PG_TRY/PG_CATCH logic to try to ensure that
everything is cleaned up on error exit. Hence, we might leak some memory
if one of these functions fails partway through. Given the deprecated
status of this contrib module and the fact that errors partway through
the functions shouldn't be too common, it doesn't seem worth worrying about.
Also fix a separate bug in xpath_table, that it did the wrong things
if given a result tuple descriptor with less than 2 columns. While
such a case isn't very useful in practice, we shouldn't fail or stomp
memory when it occurs.
Add some simple regression tests based on all the reported crash cases
that I have on hand.
This should be back-patched, but let's see if the buildfarm likes it first.
The main motivation for changing this is bug #4921, in which it's pointed out
that it's no longer safe to apply ltree operations to the result of
ARRAY(SELECT ...) if the sub-select might return no rows. Before 8.3,
the ARRAY() construct would return NULL, which might or might not be helpful
but at least it wouldn't result in an error. Now it returns an empty array
which results in a failure for no good reason, since the ltree operations
are all perfectly capable of dealing with zero-element arrays.
As far as I can find, these ltree functions are the only places where zero
array dimensionality is rejected unnecessarily.
Back-patch to 8.3 to prevent behavioral regression of queries that worked
in older releases.
The purpose of this change is to eliminate the need for every caller
of SearchSysCache, SearchSysCacheCopy, SearchSysCacheExists,
GetSysCacheOid, and SearchSysCacheList to know the maximum number
of allowable keys for a syscache entry (currently 4). This will
make it far easier to increase the maximum number of keys in a
future release should we choose to do so, and it makes the code
shorter, too.
Design and review by Tom Lane.
being called as aggregates, and to get the aggregate transition state memory
context if needed. Use it instead of poking directly into AggState and
WindowAggState in places that shouldn't know so much.
We should have done this in 8.4, probably, but better late than never.
Revised version of a patch by Hitoshi Harada.
of shared or nailed system catalogs. This has two key benefits:
* The new CLUSTER-based VACUUM FULL can be applied safely to all catalogs.
* We no longer have to use an unsafe reindex-in-place approach for reindexing
shared catalogs.
CLUSTER on nailed catalogs now works too, although I left it disabled on
shared catalogs because the resulting pg_index.indisclustered update would
only be visible in one database.
Since reindexing shared system catalogs is now fully transactional and
crash-safe, the former special cases in REINDEX behavior have been removed;
shared catalogs are treated the same as non-shared.
This commit does not do anything about the recently-discussed problem of
deadlocks between VACUUM FULL/CLUSTER on a system catalog and other
concurrent queries; will address that in a separate patch. As a stopgap,
parallel_schedule has been tweaked to run vacuum.sql by itself, to avoid
such failures during the regression tests.
exceed the total number of non-dropped source table fields for
dblink_build_sql_*(). Addresses bug report from Rushabh Lathia.
Backpatch all the way to the 7.3 branch.
(SFRM_Materialize mode) to return tuples. Since we don't return from the
dblink function in tuplestore mode, release the PGresult with a PG_CATCH
block on error. Also rearrange to share the same code to materialize the
tuplestore. Patch by Takahiro Itagaki.
This uses the same infrastructure with EXPLAIN BUFFERS to support
{shared|local}_blks_{hit|read|written} andtemp_blks_{read|written}
columns in the pg_stat_statements view. The dumped file format
also updated.
Thanks to Robert Haas for the review.
we're not going to support that anymore.
I did keep the 64-bit-CRC-with-32-bit-arithmetic code, since it has a
performance excuse to live. It's a bit moot since that's all ifdef'd
out, of course.
Variables must consist of only alphabets, numerals and underscores.
We had allowed to set variables with invalid names, but could not
refer them in queries.
Thanks to Robert Haas for the review.
PL/pgSQL function within an exception handler. Make sure we use the right
resource owner when we create the tuplestore to hold returned tuples.
Simplify tuplestore API so that the caller doesn't need to be in the right
memory context when calling tuplestore_put* functions. tuplestore.c
automatically switches to the memory context used when the tuplestore was
created. Tuplesort was already modified like this earlier. This patch also
removes the now useless MemoryContextSwitch calls from callers.
Report by Aleksei on pgsql-bugs on Dec 22 2009. Backpatch to 8.1, like
the previous patch that broke this.
\shell command runs an external shell command.
\setshell also does the same and sets the result to a variable.
original patch by Michael Paquier with some editorialization by Itagaki,
and reviewed by Greg Smith.
This patch also removes buffer-usage statistics from the track_counts
output, since this (or the global server statistics) is deemed to be a better
interface to this information.
Itagaki Takahiro, reviewed by Euler Taveira de Oliveira.
Without these functions, anyone outside of explain.c can't actually use
ExplainPrintPlan, because the ExplainState won't be initialized properly.
The user-visible result of this was a crash when using auto_explain with
the JSON output format.
Report by Euler Taveira de Oliveira. Analysis by Tom Lane. Patch by me.
processes of a pgbench run, when we are using -j > 1 and are emulating
threads via fork(). Otherwise the children all inherit the same random
sequence state and produce the same random-number sequence.
In the threaded case the different threads will share one RNG state, so
they will produce different subsets of one sequence, which is maybe more
correlated than a purist would like but will not be "the same". So we
leave that case alone.
First noticed by Takahiro Itagaki, and is also part of the explanation
for the pgbench misbehavior recently reported by Jaime Casanova.
in the formerly-always-blank columns just to left and right of the data.
Different marking is used for a line break caused by a newline in the data
than for a straight wraparound. A newline break is signaled by a "+" in the
right margin column in ASCII mode, or a carriage return arrow in UNICODE mode.
Wraparound is signaled by a dot in the right margin as well as the following
left margin in ASCII mode, or an ellipsis symbol in the same places in UNICODE
mode. "\pset linestyle old-ascii" is added to make the previous behavior
available if anyone really wants it.
In passing, this commit also cleans up a few regression test files that
had unintended spacing differences from the current actual output.
Roger Leigh, reviewed by Gabrielle Roth and other members of PDXPUG.
strength of database passwords, and create a sample implementation of
such a hook as a new contrib module "passwordcheck".
Laurenz Albe, reviewed by Takahiro Itagaki
Windows doesn't do signal processing like other platforms do. It never
really worked, but recent changes to the signal handling made it crash.
This fixes bug #4961. Patch by Fujii Masao.
Remove the 64K limit on the lengths of keys and values within an hstore.
(This changes the on-disk format, but the old format can still be read.)
Add support for btree/hash opclasses for hstore --- this is not so much
for actual indexing purposes as to allow use of GROUP BY, DISTINCT, etc.
Add various other new functions and operators.
Andrew Gierth
dblink generates orphaned connections when called with a connection string,
fail_on_error = true, and an ERROR occurs. Discovery and patch by
Tatsuhito Kasahara. Introduced in 8.4.
are used to populate the tables with -i, but when running actual benchmark
it has values separately hard-coded in the query metacommands. This patch
makes the metacommands obtain their values from the relevant #defines.
Patch provided by Jeff Janes.
source directory even for out-of-tree builds. They are now alsl built in
the build tree. This should be more convenient for certain developers'
workflows, and shouldn't really break anything else.
script.
To do this, have pg_ctl pass down its parent shell's PID in an environment
variable PG_GRANDPARENT_PID, and teach CreateLockFile() to disregard that PID
as a false match if it finds it in postmaster.pid. This allows us to cope
with one level of postgres-owned shell process even with pg_ctl in the way,
so it's just as safe as starting the postmaster directly. You still have to
be careful about how you write the initscript though.
Adjust the comments in contrib/start-scripts/ to not deprecate use of
pg_ctl. Also, fix the ROTATELOGS option in the OSX script, which was
indulging in exactly the sort of unsafe coding that renders this fix
pointless :-(. A pipe inside the "sudo" will probably result in more
than one postgres-owned process hanging around.
Test coverage support now covers the entire source tree, including
contrib, instead of just src/backend. In a related but independent
development, the commands make coverage and make coverage-html can be run
in any directory.
This turned out to be much easier than feared. Besides a few ad hoc fixes
to pass the make target down the tree, change all affected makefiles to
list their directories in the SUBDIRS variable, changed from variants like
DIRS and WANTED_DIRS. MSVC build fix was attempted as well.
Adds the ability to retrieve async notifications using dblink,
via the addition of the function dblink_get_notify(). Original patch
by Marcus Kempe, suggestions by Tom Lane and Alvaro Herrera, patch
review and adjustments by Joe Conway.
reviewed by Greg Smith and Josh Williams.
Following is the proposal from ITAGAKI Takahiro:
Pgbench is a famous tool to measure postgres performance, but nowadays
it does not work well because it cannot use multiple CPUs. On the other
hand, postgres server can use CPUs very well, so the bottle-neck of
workload is *in pgbench*.
Multi-threading would be a solution. The attached patch adds -j
(number of jobs) option to pgbench. If the value N is greater than 1,
pgbench runs with N threads. Connections are equally-divided into
them (ex. -c64 -j4 => 4 threads with 16 connections each). It can
run on POSIX platforms with pthread and on Windows with win32 threads.
Here are results of multi-threaded pgbench runs on Fedora 11 with intel
core i7 (8 logical cores = 4 physical cores * HT). -j8 (8 threads) was
the best and the tps is 4.5 times of -j1, that is a traditional result.
$ pgbench -i -s10
$ pgbench -n -S -c64 -j1 => tps = 11600.158593
$ pgbench -n -S -c64 -j2 => tps = 17947.100954
$ pgbench -n -S -c64 -j4 => tps = 26571.124001
$ pgbench -n -S -c64 -j8 => tps = 52725.470403
$ pgbench -n -S -c64 -j16 => tps = 38976.675319
$ pgbench -n -S -c64 -j32 => tps = 28998.499601
$ pgbench -n -S -c64 -j64 => tps = 26701.877815
Is it acceptable to use pthread in contrib module?
If ok, I will add the patch to the next commitfest.
values being complained of.
In passing, also remove the arbitrary length limitation in the similar
error detail message for foreign key violations.
Itagaki Takahiro
The original syntax made it difficult to add options without making them
into reserved words. This change parenthesizes the options to avoid that
problem, and makes provision for an explicit (and perhaps non-Boolean)
value for each option. The original syntax is still supported, but only
for the two original options ANALYZE and VERBOSE.
As a test case, add a COSTS option that can suppress the planner cost
estimates. This may be useful for including EXPLAIN output in the regression
tests, which are otherwise unable to cope with cross-platform variations in
cost estimates.
Robert Haas
last pair of parameter name/value strings, even when there are MAXPARAMS
of them. Aboriginal bug in contrib/xml2, noted while studying bug #4912
(though I'm not sure whether there's something else involved in that
report).
This might be thought a security issue, since it's a potential backend
crash; but considering that untrustworthy users shouldn't be allowed
to get their hands on xslt_process() anyway, it's probably not worth
getting excited about.
file to be a symlink. We tried to fix this issue with an earlier server-side
patch, but it didn't fix the whole issue.
The same bug is present in older releases as well, but the 8.4 train is
about to leave the station, and I'm not sure if have consensus on whether
we can remove the -l option in back-branches or do we need to attempt a
server-side fix to make symlinking safe.
Patch by Simon Riggs, per discussion on bug identified by Fujii Masao.
create an ABI break between 8.3 and 8.4. It is still just a wrapper around
the built-in current_query() function, but at a different implementation
level. Per my proposal.
Note: this change doesn't break 8.4beta installations, since their
SQL-language definition of the function still works fine.
The original implementation of the 3-argument form of get_raw_page() risked
core dumps if the 8.3 SQL function definition was mistakenly used with the
8.4 module, which is entirely likely after a dump-and-reload upgrade. To
protect 8.4 beta testers against upgrade problems, add a check on PG_NARGS.
In passing, fix missed additions to the uninstall script, and polish the
docs a trifle.
the <@ and @> operators. These are not in fact equivalent to the built-in
anyarray operators of the same names, because they have different behavior for
empty arrays, namely they don't think empty arrays are contained in anything.
That is mathematically wrong, no doubt, but until we can persuade GIN indexes
to implement the mathematical definition we should probably not change this.
Another reason for not changing it now is that we can't yet ensure the
opclasses will be updated correctly in a dump-and-reload upgrade. Per
recent discussions.
while we're at it per request by Tom Lane. Specifically, don't try to
perform dblink_send_query() via dblink_record_internal() -- it was
inappropriate and ugly.
is run at the end of archive recovery, providing a chance to do external
cleanup. Modify pg_standby so that it no longer removes the trigger file,
that is to be done using the recovery_end_command now.
Provide a "smart" failover mode in pg_standby, where we don't fail over
immediately, but only after recovering all unapplied WAL from the archive.
That gives you zero data loss assuming all WAL was archived before
failover, which is what most users of pg_standby actually want.
recovery_end_command by Simon Riggs, pg_standby changes by Fujii Masao and
myself.
pgbench_history, and pgbench_tellers, rather than just accounts, branches,
history, and tellers. This is to prevent accidental conflicts with real
application tables, as has been reported to happen at least once. Also
remove the automatic "SET search_path = public" that it did at startup,
as this seems to restrict testing flexibility without actually buying much.
Per proposal by Joshua Drake and ensuing discussion.
Joshua Drake and Tom Lane
than having some whitespace discrepancy. Although whitespace is supposed
to be ignored in our regression tests, for some reason buildfarm member
spoonbill doesn't like it.
any negative or positive number, not just -1 or 1. Fix comment on
varstr_cmp and citext test case accordingly.
As pointed out by Zdenek Kotala, and buildfarm member gothic moth.
don't cause confusion with the built-in anyarray versions of those operators.
Adjust the module's index opclasses to support the built-in operators in place
of the private ones.
The private implementations are still available under their historical
names @ and ~, so no functionality is lost. Some quick testing suggests
that they offer no real benefit over the core operators, however.
Per a complaint from Rusty Conover.
temporary tables of other sessions; that is unsafe because of the way our
buffer management works. Per report from Stuart Bishop.
This is redundant with the bufmgr.c checks in HEAD, but not at all redundant
in the back branches.
method to pass extra data to the consistent() and comparePartial() methods.
This is the core infrastructure needed to support the soon-to-appear
contrib/btree_gin module. The APIs are still upward compatible with the
definitions used in 8.3 and before, although *not* with the previous 8.4devel
function definitions.
catversion bump for changes in pg_proc entries (although these are just
cosmetic, since GIN doesn't actually look at the function signature before
calling it...)
Teodor Sigaev and Oleg Bartunov
not global variables of anonymous enum types. This didn't actually hurt
much because most linkers will just merge the duplicated definitions ...
but some will complain. Per bug #4731 from Ceriel Jacobs.
Backpatch to 8.1 --- the declarations don't exist before that.
reinstalling the default signal handler doesn't work as it is on Windows.
Presumably core dumps on SIGQUIT are not a problem on Windows, so rather
than figure out what header files or other changes are required to make it
work, just don't bother.
postmaster uses for immediate shutdown. Trap SIGUSR1 as the preferred
signal for that.
Per report by Fujii Masao and subsequent discussion on -hackers.
not include postgres.h nor anything else it doesn't directly need. Add
#includes to calling files as needed to compensate. Per my proposal of
yesterday.
This should be noted as a source code change in the 8.4 release notes,
since it's likely to require changes in add-on modules.
and change auto_explain's custom GUC variables to be named auto_explain.xxx
not just explain.xxx. Per discussion in connection with the
pg_stat_statements patch, it seems like a good idea to have the convention
that custom variable classes are named the same as their defining module.
Committing separately since this should happen regardless of what happens
with pg_stat_statements itself.
value-per-call mode. This should be more efficient in normal usage,
but the real problem with the prior coding was that it returned with
a SPI call still active. That could cause problems if execution was
interleaved with anything else that might use SPI.
the basic representational details (typlen, typalign, typbyval, typstorage)
to be copied from an existing type rather than listed explicitly in the
CREATE TYPE command. The immediate reason for this is to provide a simple
solution for add-on modules that want to define types represented as int8,
float4, or float8: as of 8.4 the appropriate PASSEDBYVALUE setting is
platform-specific and so it's hard for a SQL script to know what to do.
This patch fixes the contrib/isn breakage reported by Rushabh Lathia.
it was using too soon. In a situation where pg_do_encoding_conversion is
a no-op, this led to garbage data returned.
In HEAD, also modify the code that's ensuring null termination to make it
a tad more obvious what's happening.
citext-to-and-from-xml tests, since those caused variation between
installations with or without libxml without really proving much. Instead
repurpose citext_1.out as the expected results in glibc en_US (and probably
other) locales.
and heap_deformtuple in favor of the newer functions heap_form_tuple et al
(which do the same things but use bool control flags instead of arbitrary
char values). Eliminate the former duplicate coding of these functions,
reducing the deprecated functions to mere wrappers around the newer ones.
We can't get rid of them entirely because add-on modules probably still
contain many instances of the old coding style.
Kris Jurka
functions into one ReadBufferExtended function, that takes the strategy
and mode as argument. There's three modes, RBM_NORMAL which is the default
used by plain ReadBuffer(), RBM_ZERO, which replaces ZeroOrReadBuffer, and
a new mode RBM_ZERO_ON_ERROR, which allows callers to read corrupt pages
without throwing an error. The FSM needs the new mode to recover from
corrupt pages, which could happend if we crash after extending an FSM file,
and the new page is "torn".
Add fork number to some error messages in bufmgr.c, that still lacked it.
backwards scan could actually happen. In particular, pass a flag to
materialize-mode SRFs that tells them whether they need to require random
access. In passing, also suppress unneeded backward-scan overhead for a
Portal's holdStore tuplestore. Per my proposal about reducing I/O costs for
tuplestores.
via a tuplestore instead of value-per-call. Refactor a few things to reduce
ensuing code duplication with nodeFunctionscan.c. This represents the
reasonably noncontroversial part of my proposed patch to switch SQL functions
over to returning tuplestores. For the moment, SQL functions still do things
the old way. However, this change enables PL SRFs to be called in targetlists
(observe changes in plperl regression results).
pointers. This is only a whitespace change, which ought to be ignored
by regression testing, but for some reason buildfarm member spoonbill
doesn't like it.
relation forks. While the file names are not visible to users, for those
that do peek into the data directory, it's nice to have more descriptive
names. Per Greg Stark's suggestion.
large enough for block numbers higher than 2^31. The old pre-FSM-rewrite
pg_freespacemap implementation got this right. While we're at it, remove
some unnecessary #includes.
free space information is stored in a dedicated FSM relation fork, with each
relation (except for hash indexes; they don't use FSM).
This eliminates the max_fsm_relations and max_fsm_pages GUC options; remove any
trace of them from the backend, initdb, and documentation.
Rewrite contrib/pg_freespacemap to match the new FSM implementation. Also
introduce a new variant of the get_raw_page(regclass, int4, int4) function in
contrib/pageinspect that let's you to return pages from any relation fork, and
a new fsm_page_contents() function to inspect the new FSM pages.
conninfo string *before* trying to connect to the remote server, not after.
As pointed out by Marko Kreen, in certain not-very-plausible situations
this could result in sending a password from the postgres user's .pgpass file,
or other places that non-superusers shouldn't have access to, to an
untrustworthy remote server. The cleanest fix seems to be to expose libpq's
conninfo-string-parsing code so that dblink can check for a password option
without duplicating the parsing logic.
Joe Conway, with a little cleanup by Tom Lane
during parsing. Formerly the parser's stack was allocated with malloc
and so wouldn't be reclaimed; this patch makes it use palloc instead,
so that flushing the current context will reclaim the memory. Per
Marko Kreen.
1. -i option should run vacuum analyze only on pgbench tables, not *all*
tables in database.
2. pre-run cleanup step was DELETE FROM HISTORY then VACUUM HISTORY.
This is just a slow version of TRUNCATE HISTORY.
Simon Riggs
of the STRING type category, thereby opening up the mechanism for user-defined
types. This is mainly for the benefit of citext, though; there aren't likely
to be a lot of types that are all general-purpose character strings.
Per discussion with David Wheeler.
by putting it into the standard string category, we cause casts from citext
to text to be recognized as "preferred" casts. This eliminates the need
for creation of alias functions and operators that only serve to prevent
ambiguous-function errors; get rid of the ones that were in the original
commit.
pains to pass the ERROR message components locally, including
using the passed SQLSTATE. Also wrap the passed info in an
appropriate CONTEXT message. Addresses complaint by Henry
Combrinck. Joe Conway, with much good advice from Tom Lane.
corresponding struct definitions. This allows other headers to avoid including
certain highly-loaded headers such as rel.h and relscan.h, instead using just
relcache.h, heapam.h or genam.h, which are more lightweight and thus cause less
unnecessary dependencies.
by installing an error context subroutine that will provide the file name
and line number for all errors detected while reading a config file.
Some of the reader routines were already doing that in an ad-hoc way for
errors detected directly in the reader, but it didn't help for problems
detected in subroutines, such as encoding violations.
Back-patch to 8.3 because 8.3 is where people will be trying to debug
configuration files.
calling convention. cube_inter and cube_distance could attempt to pfree
their input arguments, and cube_dim returned a value from a struct it
might have just pfree'd (which would only really cause a problem in a
debug build, but it's still wrong). Per bug #4208 and additional code
reading.
In HEAD and 8.3, I also made a batch of cosmetic changes to bring these
functions into line with the preferred coding style for V1 functions,
ie declare and fetch all the arguments at the top so readers can easily
see what they are.
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.
parameter. This fixes bug 4137 reported by Wojciech Strzalka, where a WAL
file is deleted too early when starting the recovery of a warm standby server.
Also add a sanity check in pg_standby so that it will refuse to delete anything
earlier than the file being restored, and improve the debug message in case
nothing is deleted.
Simon Riggs. Backpatch to 8.3, which is where %r was introduced.
These changes assume that the varchar and xml data types are represented
the same as text. (I did not, however, accept the portions of the proposed
patch that wanted to assume bytea is the same as text --- tgl.)
Brendan Jurd
and version-1 if USE_FLOAT8_BYVAL. This might seem a bit pointless, but the
idea is to have at least one regression test that will fail if we ever
accidentally break version-0 functions that return float8. However, they're
already broken, or at least hopelessly unportable, in the USE_FLOAT8_BYVAL
case.
Per a recent suggestion from Greg Stark.
where Datum is 8 bytes wide. Since this will break old-style C functions
(those still using version 0 calling convention) that have arguments or
results of these types, provide a configure option to disable it and retain
the old pass-by-reference behavior. Likewise, provide a configure option
to disable the recently-committed float4 pass-by-value change.
Zoltan Boszormenyi, plus configurability stuff by me.
uses of the long-deprecated float32 in contrib/seg; the definitions themselves
are still there, but no longer used. fmgr/README updated to match.
I added a CREATE FUNCTION to account for existing seg_center() code in seg.c
too, and some tests for it and the neighbor functions. At the same time,
remove checks for NULL which are not needed (because the functions are declared
STRICT).
I had to do some adjustments to contrib's btree_gist too. The choices for
representation there are not ideal for changing the underlying types :-(
Original patch by Zoltan Boszormenyi, with some adjustments by me.
"consistent" functions, and remove pg_amop.opreqcheck, as per recent
discussion. The main immediate benefit of this is that we no longer need
8.3's ugly hack of requiring @@@ rather than @@ to test weight-using tsquery
searches on GIN indexes. In future it should be possible to optimize some
other queries better than is done now, by detecting at runtime whether the
index match is exact or not.
Tom Lane, after an idea of Heikki's, and with some help from Teodor.
results to contain uninitialized, unpredictable values. While this was okay
as far as the datatypes themselves were concerned, it's a problem for the
parser because occurrences of the "same" literal might not be recognized as
equal by datumIsEqual (and hence not by equal()). It seems sufficient to fix
this in the input functions since the only critical use of equal() is in the
parser's comparisons of ORDER BY and DISTINCT expressions.
Per a trouble report from Marc Cousin.
Patch all the way back. Interestingly, array_in did not have the bug before
8.2, which may explain why the issue went unnoticed for so long.
data. This makes for a significant speedup at the cost that the results
now vary between little-endian and big-endian machines; which forces us
to add explicit ORDER BYs in a couple of regression tests to preserve
machine-independent comparison results. Also, force initdb by bumping
catversion, since the contents of hash indexes will change (at least on
big-endian machines).
Kenneth Marshall and Tom Lane, based on work from Bob Jenkins. This commit
does not adopt Bob's new faster mix() algorithm, however, since we still need
to convince ourselves that that doesn't degrade the quality of the hashing.
specify the cost values to use, instead of always using 1's.
Volkan Yazici
In passing, remove fuzzystrmatch.h, which contained a bunch of stuff that had
no business being in a .h file; fold it into its only user, fuzzystrmatch.c.
strings. This patch introduces four support functions cstring_to_text,
cstring_to_text_with_len, text_to_cstring, and text_to_cstring_buffer, and
two macros CStringGetTextDatum and TextDatumGetCString. A number of
existing macros that provided variants on these themes were removed.
Most of the places that need to make such conversions now require just one
function or macro call, in place of the multiple notational layers that used
to be needed. There are no longer any direct calls of textout or textin,
and we got most of the places that were using handmade conversions via
memcpy (there may be a few still lurking, though).
This commit doesn't make any serious effort to eliminate transient memory
leaks caused by detoasting toasted text objects before they reach
text_to_cstring. We changed PG_GETARG_TEXT_P to PG_GETARG_TEXT_PP in a few
places where it was easy, but much more could be done.
Brendan Jurd and Tom Lane
pattern-examination heuristic method to purely histogram-driven selectivity at
histogram size 100, we compute both estimates and use a weighted average.
The weight put on the heuristic estimate decreases linearly with histogram
size, dropping to zero for 100 or more histogram entries.
Likewise in ltreeparentsel(). After a patch by Greg Stark, though I
reorganized the logic a bit to give the caller of histogram_selectivity()
more control.
data structures and backend internal APIs. This solves problems we've seen
recently with inconsistent layout of pg_control between machines that have
32-bit time_t and those that have already migrated to 64-bit time_t. Also,
we can get out from under the problem that Windows' Unix-API emulation is not
consistent about the width of time_t.
There are a few remaining places where local time_t variables are used to hold
the current or recent result of time(NULL). I didn't bother changing these
since they do not affect any cross-module APIs and surely all platforms will
have 64-bit time_t before overflow becomes an actual risk. time_t should
be avoided for anything visible to extension modules, however.
failed to cover all the ways in which a connection can be initiated in dblink.
Plug the remaining holes. Also, disallow transient connections in functions
for which that feature makes no sense (because they are only sensible as
part of a sequence of operations on the same connection). Joe Conway
Security: CVE-2007-6601
hazards. Instead teach these programs to prompt for a password when
necessary, just like all our other programs.
I did not bother to invent -W switches for them, since the return on
investment seems so low.
switch optional, as is the case for every other one of our programs.
I had already documented its -W as being optional, so this is bringing
the code into line with the docs ...
The original coding leaked memory (at least 8K per crosstab_hash call)
because it allowed the hash table to be allocated as a child of
TopMemoryContext and then never freed it. Fix that by putting the
hash table under per_query_ctx, instead. Also get rid of use
of a static variable to point to the hash table. Aside from being
ugly, that would actively do the wrong thing in the case of re-entrant
calls to crosstab_hash, which are at least theoretically possible
since it was expecting the static variable to stay valid across
a SPI_execute call.
since we supported standard FOREIGN KEY constraint syntax. It was
harmless enough just sitting there, but the prospect of having to
document it is surely more work than it's worth.
but no database changes have been made since the last CommandCounterIncrement.
This should result in a significant improvement in the number of "commands"
that can typically be performed within a transaction before hitting the 2^32
CommandId size limit. In particular this buys back (and more) the possible
adverse consequences of my previous patch to fix plan caching behavior.
The implementation requires tracking whether the current CommandCounter
value has been "used" to mark any tuples. CommandCounter values stored into
snapshots are presumed not to be used for this purpose. This requires some
small executor changes, since the executor used to conflate the curcid of
the snapshot it was using with the command ID to mark output tuples with.
Separating these concepts allows some small simplifications in executor APIs.
Something for the TODO list: look into having CommandCounterIncrement not do
AcceptInvalidationMessages. It seems fairly bogus to be doing it there,
but exactly where to do it instead isn't clear, and I'm disinclined to mess
with asynchronous behavior during late beta.
inappropriately generic-sounding names. This is more or less free since
we already forced initdb for the next beta, and it may prevent confusion or
name conflicts (particularly at the C-global-symbol level) down the road.
Per my proposal yesterday.
compatibility package. This supports importing dumps from past versions
using tsearch2, and provides the old names and API for most functions
that were changed. (rewrite(ARRAY[...]) is a glaring omission, though.)
Pavel Stehule and Tom Lane
about best practice for including the module creation scripts: to wit
that you should suppress NOTICE messages. This avoids creating
regression failures by adding or removing comment lines in the module
scripts.
Remove setting of search_path in install/uninstall scripts, since unlike
other contrib modules this one does not want to let you change the
installation schema.
itself as libuuid, not libossp-uuid which was the only case expected by
our build support. Install a configure test to determine which name
to use (and to check that the library is present at all).
remove transactions
use create or replace function
make formatting consistent
set search patch on first line
Add documentation on modifying *.sql to set the search patch, and
mention that major upgrades should still run the installation scripts.
Some of these issues were spotted by Tom today.
on CORE previously.
This module offers transaction ID's containing the original XID and the
transaction epoch as a bigint value to the user level. It also provides
a special txid_snapshot data type that contains an entire transactions
visibility snapshot information, which is useful to determine if a
particular txid was visible to a transaction or not.
The module has been tested by porting Slony-I from using its original
xxid data type.
Jan
testing). Combine the formerly independent opclasses for the various
ISN types into opfamilies. The latter causes some extra bleating from
opr_sanity, since the module doesn't provide complete sets of cross-type
operators, but it's still a good idea because it will give the planner
more information to work with. The missing cross-type operators no longer
pose a risk of unexpected planner errors in 8.3, so there's no need to
insist on filling them in (and I gather it wouldn't be very sound
semantically to add them all).
couldn't possibly HAVE_GETOPT. I believe this is the most appropriate
form of the patch submitted 2007-08-07 by Hiroshi Saito, though not
having a Windows build environment I won't know for sure till I see
the buildfarm results.
- create a separate archive_mode GUC, on which archive_command is dependent
- %r option in recovery.conf sends last restartpoint to recovery command
- %r used in pg_standby, updated README
- minor other code cleanup in pg_standby
- doc on Warm Standby now mentions pg_standby and %r
- log_restartpoints recovery option emits LOG message at each restartpoint
- end of recovery now displays last transaction end time, as requested
by Warren Little; also shown at each restartpoint
- restart archiver if needed to carry away WAL files at shutdown
Simon Riggs
unpruned XMAX in its header. At the cost of 4 bytes per page, this keeps us
from performing heap_page_prune when there's no chance of pruning anything.
Seems to be necessary per Heikki's preliminary performance testing.
columns, and the new version can be stored on the same heap page, we no longer
generate extra index entries for the new version. Instead, index searches
follow the HOT-chain links to ensure they find the correct tuple version.
In addition, this patch introduces the ability to "prune" dead tuples on a
per-page basis, without having to do a complete VACUUM pass to recover space.
VACUUM is still needed to clean up dead index entries, however.
Pavan Deolasee, with help from a bunch of other people.
than two independent bits (one of which was never used in heap pages anyway,
or at least hadn't been in a very long time). This gives us flexibility to
add the HOT notions of redirected and dead item pointers without requiring
anything so klugy as magic values of lp_off and lp_len. The state values
are chosen so that for the states currently in use (pre-HOT) there is no
change in the physical representation.
padded encryption scheme. Formerly it would try to access res[(unsigned) -1],
which resulted in core dumps on 64-bit machines, and was certainly trouble
waiting to happen on 32-bit machines (though in at least the known case
it was harmless because that byte would be overwritten after return).
Per report from Ken Colson; fix by Marko Kreen.
named pg_toast_temp_nnn, alongside the pg_temp_nnn schemas used for the temp
tables themselves. This allows low-level code such as the relcache to
recognize that these tables are indeed temporary, which enables various
optimizations such as not WAL-logging changes and using local rather than
shared buffers for access. Aside from obvious performance benefits, this
provides a solution to bug #3483, in which other backends unexpectedly held
open file references to temporary tables. The scheme preserves the property
that TOAST tables are not in any schema that's normally in the search path,
so they don't conflict with user table names.
initdb forced because of changes in system view definitions.
and add a note about why. This is not tremendously important right now,
probably, but it will get more urgent if NUM_BUFFER_PARTITIONS is increased
as much as proposed.
to prevent possible escalation of privilege. Provide new SECURITY
DEFINER functions with old behavior, but initially REVOKE ALL
from public for these functions. Per list discussion and design
proposed by Tom Lane. A different approach will be used for
back-branches, committed separately.
installations whose pg_config program does not appear first in the PATH.
Per gripe from Eddie Stanley and subsequent discussions with Fabien Coelho
and others.
from the other string-category types; this eliminates a lot of surprising
interpretations that the parser could formerly make when there was no directly
applicable operator.
Create a general mechanism that supports casts to and from the standard string
types (text,varchar,bpchar) for *every* datatype, by invoking the datatype's
I/O functions. These new casts are assignment-only in the to-string direction,
explicit-only in the other, and therefore should create no surprising behavior.
Remove a bunch of thereby-obsoleted datatype-specific casting functions.
The "general mechanism" is a new expression node type CoerceViaIO that can
actually convert between *any* two datatypes if their external text
representations are compatible. This is more general than needed for the
immediate feature, but might be useful in plpgsql or other places in future.
This commit does nothing about the issue that applying the concatenation
operator || to non-text types will now fail, often with strange error messages
due to misinterpreting the operator as array concatenation. Since it often
(not always) worked before, we should either make it succeed or at least give
a more user-friendly error; but details are still under debate.
Peter Eisentraut and Tom Lane
will exit before failing because of conflicting DB usage. Per discussion,
this seems a good idea to help mask the fact that backend exit takes nonzero
time. Remove a couple of thereby-obsoleted sleeps in contrib and PL
regression test sequences.
pages it intends to zero immediately. Just to show there is some use for that
function besides WAL recovery :-).
Along the way, fold _hash_checkpage and _hash_pageinit calls into _hash_getbuf
and friends, instead of expecting callers to do that separately.
If this breaks things due to missing libxslt, then I'll have to
revert it, but let's see if it breaks the buildfarm.
Workarounds in case libxslt is missing include:
. don't configure with libxml, or
. don't build contrib modules from the contrib Makefile (use the individual module Makefiles instead), or
. change the xml2 Makefile
Smith. Along with Japanese doc updation by Tasuo Ishii.
> This patch changes the way pgbench outputs its latency log files so that
> every transaction gets a timestamp and notes which transaction type was
> executed. It's a one-line change that just dumps some additional
> information that was already sitting in that area of code. I also made a
> couple of documentation corrections and clarifications on some of the more
> confusing features of pgbench.
>
> It's straightforward to parse log files in this format to analyze what
> happened during the test at a higher level than was possible with the
> original format. You can find some rough sample code to convert this
> latency format into CVS files and then into graphs at
> http://www.westnet.com/~gsmith/content/postgresql/pgbench.htm which I'll
> be expanding on once I get all my little patches sent in here.
Also tweak README.pgbench/README.pgbench_jis:
Remove history after pgbench was added to PostgreSQL contrib module.
Those info was not only redundant since it has already been in CVS
log, but also incomplete.
--------------------------------------------------------------------------
The attached is a patch to optimize contrib/pgbench using new 8.3 features.
- Use DROP IF EXISTS to suppress errors for initial loadings.
- Use a combination of TRUNCATE and COPY to reduce WAL on creating
the accounts table.
Also, there are some cosmetic changes.
- Change the output of -v option from "starting full vacuum..."
to "starting vacuum accounts..." in reflection of the fact.
- Shape duplicated error checks into executeStatement().
There is a big performance win in "COPY with no WAL" feature.
Thanks for the efforts!
--------------------------------------------------------------------------
right, there seems precious little reason to have a pile of hand-maintained
endianness definitions in src/include/port/*.h. Get rid of those, and make
the couple of places that used them depend on WORDS_BIGENDIAN instead.
This commit breaks any code that assumes that the mere act of forming a tuple
(without writing it to disk) does not "toast" any fields. While all available
regression tests pass, I'm not totally sure that we've fixed every nook and
cranny, especially in contrib.
Greg Stark with some help from Tom Lane
pointer" in every Snapshot struct. This allows removal of the case-by-case
tests in HeapTupleSatisfiesVisibility, which should make it a bit faster
(I didn't try any performance tests though). More importantly, we are no
longer violating portable C practices by assuming that small integers are
distinct from all pointer values, and HeapTupleSatisfiesDirty no longer
has a non-reentrant API involving side-effects on a global variable.
There were a couple of places calling HeapTupleSatisfiesXXX routines
directly rather than through the HeapTupleSatisfiesVisibility macro.
Since these places had to be changed anyway, I chose to make them go
through the macro for uniformity.
Along the way I renamed HeapTupleSatisfiesSnapshot to HeapTupleSatisfiesMVCC
to emphasize that it's only used with MVCC-type snapshots. I was sorely
tempted to rename HeapTupleSatisfiesVisibility to HeapTupleSatisfiesSnapshot,
but forebore for the moment to avoid confusion and reduce the likelihood that
this patch breaks some of the pending patches. Might want to reconsider
doing that later.
uses SPI plans, this finally fixes the ancient gotcha that you can't
drop and recreate a temp table used by a plpgsql function.
Along the way, clean up SPI's API a little bit by declaring SPI plan
pointers as "SPIPlanPtr" instead of "void *". This is cosmetic but
helps to forestall simple programming mistakes. (I have changed some
but not all of the callers to match; there are still some "void *"'s
in contrib and the PL's. This is intentional so that we can see if
anyone's compiler complains about it.)
with minor editorization by me.
Hstore improvements
* add operation hstore ? text - excat equivalent of exist()
* remove undocumented behaviour of contains operation with NULL value
* now 'key'::text=>NULL returns '"key"=>NULL' instead of NULL
* Add GIN support for contains and exist operations
* Add GiST support for exist operatiion
* improve regression tests
fix it. Add macroses DatumGetNDBOX, PG_GETARG_NDBOX and PG_RETURN_NDBOX.
Backpatch for 8.2 too.
Previous versions use version 0 calling conventions. And fmgr code detoast
values for user-defined functions.
fixup various places in the tree that were clearing a StringInfo by hand.
Making this function a part of the API simplifies client code slightly,
and avoids needlessly peeking inside the StringInfo interface.
ways. I'm not totally sure that I caught everything, but at least now they pass
their regression tests with VARSIZE/SET_VARSIZE defined to reverse byte order.
Get rid of VARATT_SIZE and VARATT_DATA, which were simply redundant with
VARSIZE and VARDATA, and as a consequence almost no code was using the
longer names. Rename the length fields of struct varlena and various
derived structures to catch anyplace that was accessing them directly;
and clean up various places so caught. In itself this patch doesn't
change any behavior at all, but it is necessary infrastructure if we hope
to play any games with the representation of varlena headers.
Greg Stark and Tom Lane
pg_standby is a production-ready program that can be used to
create a Warm Standby server. Other configuration is required
as well, all of which is described in the main server manual.
Simon Riggs
pg_standby is a production-ready program that can be used to
create a Warm Standby server. Other configuration is required
as well, all of which is described in the main server manual.
Simon Riggs
where possible, and fix some sites that apparently thought that fgets()
will overwrite the buffer by one byte.
Also add some strlcpy() to eliminate some weird memory handling.
Standard English uses "may", "can", and "might" in different ways:
may - permission, "You may borrow my rake."
can - ability, "I can lift that log."
might - possibility, "It might rain today."
Unfortunately, in conversational English, their use is often mixed, as
in, "You may use this variable to do X", when in fact, "can" is a better
choice. Similarly, "It may crash" is better stated, "It might crash".
In this case extractQuery should returns -1 as nentries. This changes
prototype of extractQuery method to use int32* instead of uint32* for
nentries argument.
Based on that gincostestimate may see two corner cases: nothing will be found
or seqscan should be used.
Per proposal at http://archives.postgresql.org/pgsql-hackers/2007-01/msg01581.php
PS tsearch_core patch should be sightly modified to support changes, but I'm
waiting a verdict about reviewing of tsearch_core patch.
suffix, to distinguish them from doubles. Make some function declarations
and definitions use the "const" qualifier for arguments consistently.
Ignore warning 4102 ("unreferenced label"), because such warnings
are always emitted by bison-generated code. Patch from Magnus Hagander.
the 8.1 SQL function definition for it. Per report from Rajesh Kumar Mallah,
such a DBA error doesn't seem at all improbable, and the cost of checking for
it is not very high compared to the cost of running this function. (It would
have been better to change the C name of the function so it wouldn't be called
by the old SQL definition, but it's too late for that now in the 8.2 branch.)
pgbench calls random() later, so it should have called srandom().
On most platforms except Windows srandom() is actually identical
to srand(), so the bug only bites Windows users.
per bug report from Akio Ishida.
cases. Operator classes now exist within "operator families". While most
families are equivalent to a single class, related classes can be grouped
into one family to represent the fact that they are semantically compatible.
Cross-type operators are now naturally adjunct parts of a family, without
having to wedge them into a particular opclass as we had done originally.
This commit restructures the catalogs and cleans up enough of the fallout so
that everything still works at least as well as before, but most of the work
needed to actually improve the planner's behavior will come later. Also,
there are not yet CREATE/DROP/ALTER OPERATOR FAMILY commands; the only way
to create a new family right now is to allow CREATE OPERATOR CLASS to make
one by default. I owe some more documentation work, too. But that can all
be done in smaller pieces once this infrastructure is in place.
Previous versions aren't affected.
Fix synonym dictionary init: string should be malloc'ed, not palloc'ed. Bug
introduced recently while fixing lowerstr().
commutator operators, and mark hash-opclass members as oprcanhash.
This is a pretty ugly, brute-force solution, but it seems that getting
rid of all these redundant-looking operators would require some tweaks
in the core operator-resolution code to behave nicely, and I'm not
willing to risk that just before RC1.
Fix string's length calculation for recoding, fix strlower() to avoid wrong
assumption about length of recoded string (was: recoded string is no greater
that source, it may not true for multibyte encodings)
Thanks to Thomas H. <me@alternize.com> and Magnus Hagander <mha@sollentuna.net>
scenarios. With multiple clinets, only the first client got the right
scaling factor and this gave a illusion of better performance in case
of the scaling factor greater than 1.
max_stack_depth is not set to an unsafe value.
This commit also provides configure-time checking for <sys/resource.h>,
and cleans up some perhaps-unportable code associated with use of that
include file and getrlimit().
static variables. This avoids any risk of potential non-reentrancy,
and in particular offers a much cleaner workaround for the Intel compiler
bug that was affecting ginutil.c.
return true for exactly the characters treated as whitespace by their flex
scanners. Per report from Victor Snezhko and subsequent investigation.
Also fix a passel of unsafe usages of <ctype.h> functions, that is, ye olde
char-vs-unsigned-char issue. I won't miss <ctype.h> when we are finally
able to stop using it.
even when a single relation requires more than max_fsm_pages pages. Also,
make VACUUM emit a warning in this case, since it likely means that VACUUM
FULL or other drastic corrective measure is needed. Per reports from Jeff
Frost and others of unexpected changes in the claimed max_fsm_pages need.
is a large enough histogram, it will use the number of matches in the
histogram to derive a selectivity estimate, rather than the admittedly
pretty bogus heuristics involving examining the pattern contents. I set
'large enough' at 100, but perhaps we should change that later. Also
apply the same technique in contrib/ltree's <@ and @> estimator. Per
discussion with Stefan Kaltenbrunner and Matteo Beccati.
alias with the old name for backwards compatibility. Per discussion,
the old name is actively wrong because validity and well-formedness
have different meanings in XML.
match the convention that foo's uninstall script is uninstall_foo.sql.
Also, stop installing lo_test.sql, which really ought to be made into
a regression test anyway (though it's unclear how to avoid a dependency
on the current OID counter...)
an earlier discussion. Centralize assumptions about what libpq depends
on in one place in Makefile.global. I am unconvinced that this list
is complete, but since ecpg seems to have gotten along with just these
entries, we'll try it this way and see what happens.
remove the old isbn_issn module which is about to be obsoleted by EAN13.
contrib/isn is by Germán Méndez Bravo. Our thanks to Garrett A. Wollman
for having written the original isbn_issn module.
(table or index) before trying to open its relcache entry. This fixes
race conditions in which someone else commits a change to the relation's
catalog entries while we are in process of doing relcache load. Problems
of that ilk have been reported sporadically for years, but it was not
really practical to fix until recently --- for instance, the recent
addition of WAL-log support for in-place updates helped.
Along the way, remove pg_am.amconcurrent: all AMs are now expected to support
concurrent update.
- predefined variable "tps"
The value of variable tps is taken from the scaling factor
specified by -s option.
- -D option
Variable values can be defined by -D option.
- \set command now allows arithmetic calculations.
Update the calling convention for all external facing functions. By
external facing, I mean all functions that are directly referenced in
cube.sql. Prior to my update, all functions used the older V0 calling
convention. They now use V1.
New Functions:
cube(float[]), which makes a zero volume cube from a float array
cube(float[], float[]), which allows the user to create a cube from
two float arrays; one for the upper right and one for the lower left
coordinate.
cube_subset(cube, int4[]), to allow you to reorder or choose a subset of
dimensions from a cube, using index values specified in the array.
Joshua Reich
Few cleanups and couple of new things:
- add SHA2 algorithm to older OpenSSL
- add BIGNUM math to have public-key cryptography work on non-OpenSSL
build.
- gen_random_bytes() function
The status of SHA2 algoritms and public-key encryption can now be
changed to 'always available.'
That makes pgcrypto functionally complete and unless there will be new
editions of AES, SHA2 or OpenPGP standards, there is no major changes
planned.
- Replace sorted array of entries in maintenance_work_mem to binary tree,
this should improve create performance.
- More precisely calculate allocated memory, eliminate leaks
with user-defined extractValue()
- Improve wordings in tsearch2
This is an extension of pgstattuple to query information from indexes.
It supports btree, hash and gist. Gin is not supported. It scans only
index pages and does not read corresponding heap tuples. Therefore,
'dead_tuple' means the number of tuples with LP_DELETE flag.
Also, I added an experimental feature for btree indexes. It checks
fragmentation factor of indexes. If an leaf has the right link on the
next adjacent page in the file, it is assumed to be continuous (not
fragmented). It will help us to decide when to REINDEX.
ITAGAKI Takahiro
> Upstream confirmed my reply in the last mail in [1]: the complete
> escaping logic in DBMirror.pl is seriously screwew.
>
> [1] http://archives.postgresql.org/pgsql-bugs/2006-06/msg00065.php
I finally found some time to debug this, and I think I found a better
patch than the one you proposed. Mine is still hackish and is still a
workaround around a proper quoting solution, but at least it repairs
the parsing without introducing the \' quoting again.
I consider this a band-aid patch to fix the recent security update.
PostgreSQL gurus, would you consider applying this until a better
solution is found for DBMirror.pl?
Olivier, can you please confirm that the patch works for you, too?
Backpatched to 8.0.X.
Martin Pitt
* new split algorithm (as proposed in http://archives.postgresql.org/pgsql-hackers/2006-06/msg00254.php)
* possible call pickSplit() for second and below columns
* add spl_(l|r)datum_exists to GIST_SPLITVEC -
pickSplit should check its values to use already defined
spl_(l|r)datum for splitting. pickSplit should set
spl_(l|r)datum_exists to 'false' (if they was 'true') to
signal to caller about using spl_(l|r)datum.
* support for old pickSplit(): not very optimal
but correct split
* remove 'bytes' field from GISTENTRY: in any case size of
value is defined by it's type.
* split GIST_SPLITVEC to two structures: one for using in picksplit
and second - for internal use.
* some code refactoring
* support of subsplit to rtree opclasses
TODO: add support of subsplit to contrib modules
tuples with less header overhead than a regular HeapTuple, per my
recent proposal. Teach TupleTableSlot code how to deal with these.
As proof of concept, change tuplestore.c to store MinimalTuples instead
of HeapTuples. Future patches will expand the concept to other places
where it is useful.
initially be 0. This is needed as a previous ABORT might have wiped out
an automatically opened transaction without maintaining the cursor count.
- Fix regression test expected file for the correct ERROR message, which
we now get given the above bug fix.
used by OpenOffice. Dictionaries are placed at
http://lingucomponent.openoffice.org/spell_dic.html
Dictionary automatically recognizes format of files.
Warning. MySpell's format has limitation with compound
word support: it's impossible to mark affix as
compound-only affix. So for norwegian, german etc
languages it's recommended to use original ispell format.
For that reason I don't want to remove my2ispell
scripts, it's has workaround at least for norwegian language.
It required some changes in lexize algorithm, but interface with
dictionaries stays compatible with old dictionaries.
Funded by Georgia Public Library Service and LibLime, Inc.
versions of OpenSSL. If your OpenSSL does not contain SHA2, then there
should be no conflict. But ofcourse, if someone upgrades OpenSSL,
server starts crashing.
Backpatched to 8.1.X.
Marko Kreen
any use in the past many years, we'd have made some effort to include
them in all executor node types; but in fact they were only in
nodeAppend.c and nodeIndexscan.c, up until I copied nodeIndexscan.c's
occurrence into the new bitmap node types. Remove some other unused
macros in execdebug.h, too. Some day the whole header probably ought to
go away in favor of better-designed facilities.
pg_freespacemap_relations --- while one could theoretically get that
number by counting rows in pg_freespacemap_pages, it's surely the hard
way to do it. Avoid expensive and inconvenient conversion to and from
text format. Minor code and docs cleanup.
tracks index pages, not free space on pages):
1/ Index free bytes set to NULL
2/ Comment added to the README briefly mentioning the index business
3/ Columns reordered more logically
4/ 'Blockid' column removed
5/ Free bytes column renamed to just 'bytes' instead of 'blockfreebytes'
Mark Kirkwood
during parse analysis, not only errors detected in the flex/bison stages.
This is per my earlier proposal. This commit includes all the basic
infrastructure, but locations are only tracked and reported for errors
involving column references, function calls, and operators. More could
be done later but this seems like a good set to start with. I've also
moved the ReportSyntaxErrorPosition logic out of psql and into libpq,
which should make it available to more people --- even within psql this
is an improvement because warnings weren't handled by ReportSyntaxErrorPosition.
Most of the changes add the mandatory USING clause to DROP OPERATOR
CLASS statements. DROP TYPE is now DROP TYPE CASCADE; without
CASCADE a DROP TYPE fails due to the circular dependency on the
type's I/O functions. The DROP FUNCTION statements for the I/O
functions have been removed, as DROP TYPE CASCADE removes them
automatically. Patch from Michael Fuhr.
similar constants if they were not previously defined. All these
constants must be defined by limits.h according to C89, so we can
safely assume they are present.
(respectively) to rename yylex and related symbols. Some were doing
it this way already, while others used not-too-reliable sed hacks in
the Makefiles. It's all nice and consistent now.
1) rank_cd now use weight of lexemes
2) rank_cd and rank can use any combination of normalization methods:
no normalization
normalization by log(length of document)
-----/------- by length of document
-----/------- by number of unique word in document
-----/------- by log(number of unique word in document)
-----/------- by number of covers (only rank_cd)
Improve cover's search.
TODO: changes in documentation
are unnecessarily allocated on the heap rather than the stack. If the
StringInfo doesn't outlive the stack frame in which it is created,
there is no need to allocate it on the heap via makeStringInfo() --
stack allocation is faster. While it's not a big deal unless the
code is in a critical path, I don't see a reason not to save a few
cycles -- using stack allocation is not less readable.
I also cleaned up a bit of code along the way: moved variable
declarations into a more tightly-enclosing scope where possible,
fixed some pointless copying of strings in dblink, etc.
more compliant with the error message style guide. In particular,
errdetail should begin with a capital letter and end with a period,
whereas errmsg should not. I also fixed a few related issues in
passing, such as fixing the repeated misspelling of "lexeme" in
contrib/tsearch2 (per Tom's suggestion).
pgcrypto crypt()/md5 and hmac() leak memory when compiled against
OpenSSL as openssl.c digest ->reset will do two DigestInit calls
against a context. This happened to work with OpenSSL 0.9.6
but not with 0.9.7+.
Reason for the messy code was that I tried to avoid creating
wrapper structure to transport algorithm info and tried to use
OpenSSL context for it. The fix is to create wrapper structure.
It also uses newer digest API to avoid memory allocations
on reset with newer OpenSSLs.
Thanks to Daniel Blaisdell for reporting it.
sorry but fix can't be applyed to previous version: it's require
refill tsvector...
2 Small optimize of load time for huge dictionaries
3 use palloc instead of malloc during load dict file
singlebyte encodings, so we should have snowball for every encodings.
I hope that finalize multibyte support work in tsearch2, but testing is needed...
sizebitvec of tsearch2, as well as identical code in several other
contrib modules. This provided about a 20X speedup in building a
large tsearch2 index ... didn't try to measure its effects for other
operations. Thanks to Stephan Vollmer for providing a test case.
the data defining the semantics of a lock method (ie, conflict resolution
table and ancillary data, which is all constant) and the hash tables
storing the current state. The only thing we give up by this is the
ability to use separate hashtables for different lock methods, but there
is no need for that anyway. Put some extra fields into the LockMethod
definition structs to clean up some other uglinesses, like hard-wired
tests for DEFAULT_LOCKMETHOD and USER_LOCKMETHOD. This commit doesn't
do anything about the performance issues we were discussing, but it clears
away some of the underbrush that's in the way of fixing that.
support for the dbf2pg contrib module.
The submitter created a patch which replaces the silent ignoring of -F
(when iconv support is disabled) with a meaningful warning.
Martin Pitt
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
- supports multibyte encodings
- more strict rules for lexemes
- flex isn't used
Add:
- tsquery plainto_tsquery(text)
Function makes tsquery from plain text.
- &&, ||, !! operation for tsquery for combining
tsquery from it's parts: 'foo & bar' || 'asd' => 'foo & bar | asd'
functionality, but I still need to make another pass looking at places
that incidentally use arrays (such as ACL manipulation) to make sure they
are null-safe. Contrib needs work too.
I have not changed the behaviors that are still under discussion about
array comparison and what to do with lower bounds.
1 Comparison operation for tsquery
2 Btree index on tsquery
3 numnode(tsquery) - returns 'length' of tsquery
4 tsquery @ tsquery, tsquery ~ tsquery - contains, contained for tsquery.
Note: They don't gurantee exact result, only MAY BE, so it
useful only for speed up rewrite functions
5 GiST index support for @,~
6 rewrite():
select rewrite(orig, what, to);
select rewrite(ARRAY[orig, what, to]) from tsquery_table;
select rewrite(orig, 'select what, to from tsquery_table;');
7 significantly improve cover algorithm
if there isn't one already open. Upon dblink_close, only commit
the open transaction if it was started by dblink_open, and only
then when all cursors opened by dblink_open are closed. The transaction
accounting is done individually for all named connections, plus
the persistent unnamed connection.
pointers, to ensure that compilers won't rearrange accesses to occur
while we're not holding the buffer header spinlock. It's probably
not necessary to mark volatile in every single place in bufmgr.c,
but better safe than sorry. Per trouble report from Kevin Grittner.
like '23:59:60' because of fractional-second roundoff problems. Trying
to control this upstream of the actual display code was hopeless; the right
way is to explicitly round fractional seconds in the display code and then
refigure the results if the fraction rounds up to 1. Per bug #1927.
Remove unportable use of tfind/tsearch in favor of bsearch. Fix up
random number generator to use random() not rand() and to actually honor
its min/max arguments properly. That wasn't so important before, but
with exposure of capability to ask for general ranges, it will be.
argument as a 'regclass' value instead of a text string. The frontend
conversion of text string to pg_class OID is now encapsulated as an
implicitly-invocable coercion from text to regclass. This provides
backwards compatibility to the old behavior when the sequence argument
is explicitly typed as 'text'. When the argument is just an unadorned
literal string, it will be taken as 'regclass', which means that the
stored representation will be an OID. This solves longstanding problems
with renaming sequences that are referenced in default expressions, as
well as new-in-8.1 problems with renaming such sequences' schemas or
moving them to another schema. All per recent discussion.
Along the way, fix some rather serious problems in dbmirror's support
for mirroring sequence operations (int4 vs int8 confusion for instance).
a few typos in comments.
The dictionaries I checked list "altho" as a variant of "although,"
but I didn't find any other instances of the former in the source
tree so I changed it.
Michael Fuhr
the pubkey functions a bit. The actual RSA-specific code
there is tiny, most of the patch consists of reorg of the
pubkey code, as lots of it was written as elgamal-only.
---------------------------------------------------------------------------
The SHLIB section was copy-pasted from somewhere and contains
several unnecessary libs. This cleans it up a bit.
-lcrypt
we don't use system crypt()
-lssl, -lssleay32
no SSL here
-lz in win32 section
already added on previous line
-ldes
The chance anybody has it is pretty low.
And the chance pgcrypto works with it is even lower.
Also trim the win32 section.
---------------------------------------------------------------------------
It is already disabled in Makefile, remove code too.
---------------------------------------------------------------------------
I was bit hasty making the random exponent 'k' a prime. Further researh
shows that Elgamal encryption has no specific needs in respect to k,
any random number is fine.
It is bit different for signing, there it needs to be 'relatively prime'
to p - 1, that means GCD(k, p-1) == 1, which is also a lot lighter than
full primality. As we don't do signing, this can be ignored.
This brings major speedup to Elgamal encryption.
---------------------------------------------------------------------------
o pgp_mpi_free: Accept NULLs
o pgp_mpi_cksum: result should be 16bit
o Remove function name from error messages - to be similar to other
SQL functions, and it does not match anyway the called function
o remove couple junk lines
---------------------------------------------------------------------------
o Support for RSA encryption
o Big reorg to better separate generic and algorithm-specific code.
o Regression tests for RSA.
---------------------------------------------------------------------------
o Tom stuck a CVS id into file. I doubt the usefulness of it,
but if it needs to be in the file then rather at the end.
Also tag it as comment for asciidoc.
o Mention bytea vs. text difference
o Couple clarifications
---------------------------------------------------------------------------
There is a choice whether to update it with pgp functions or
remove it. I decided to remove it, updating is pointless.
I've tried to keep the core of pgcrypto relatively independent
from main PostgreSQL, to make it easy to use externally if needed,
and that is good. Eg. that made development of PGP functions much
nicer.
But I have no plans to release it as generic library, so keeping such
doc
up-to-date is waste of time. If anyone is interested in using it in
other products, he can probably bother to read the source too.
Commented source is another thing - I'll try to make another pass
over code to see if there is anything non-obvious that would need
more comments.
---------------------------------------------------------------------------
Marko Kreen
calculations for interval and time/timetz to behave sanely for both
integer and float timestamps; up to now I think it's been doing
something pretty strange...
OpenSSL 0.9.6x. The DES functions use the older 'des_'
API, but the newer 3DES functions use the 0.9.7x-only
'DES_' API.
I think I just used /usr/include/openssl/des.h for reference
when implementing them, and had upgraded OpenSSL in the
meantime.
Following patch converts DES also to newer API and provides
compatibility functions for OpenSSL < 0.9.7.
I chose this route because:
- openssl.c uses few DES functions.
- compatibility for old 'des_' API is going away at some point
of time from OpenSSL.
- as seen from macros, new API is saner
- Thus pgcrypto supports any OpenSSL version from 0.9.5 to 1.0
Tested with OpenSSL 0.9.6c and 0.9.7e.
Marko Kreen
of password-based encryption from RFC2440 (OpenPGP).
The goal of this code is to be more featureful encryption solution
than current encrypt(), which only functionality is running cipher
over data.
Compared to encrypt(), pgp_encrypt() does following:
* It uses the equvialent of random Inital Vector to get cipher
into random state before it processes user data
* Stores SHA-1 of the data into result so any modification
will be detected.
* Remembers if data was text or binary - thus it can decrypt
to/from text data. This was a major nuisance for encrypt().
* Stores info about used algorithms with result, so user needs
not remember them - more user friendly!
* Uses String2Key algorithms (similar to crypt()) with random salt
to generate full-length binary key to be used for encrypting.
* Uses standard format for data - you can feed it to GnuPG, if needed.
Optional features (off by default):
* Can use separate session key - user data will be encrypted
with totally random key, which will be encrypted with S2K
generated key and attached to result.
* Data compression with zlib.
* Can convert between CRLF<->LF line-endings - to get fully
RFC2440-compliant behaviour. This is off by default as
pgcrypto does not know the line-endings of user data.
Interface is simple:
pgp_encrypt(data text, key text) returns bytea
pgp_decrypt(data text, key text) returns text
pgp_encrypt_bytea(data bytea, key text) returns bytea
pgp_decrypt_bytea(data bytea, key text) returns bytea
To change parameters (cipher, compression, mdc):
pgp_encrypt(data text, key text, parms text) returns bytea
pgp_decrypt(data text, key text, parms text) returns text
pgp_encrypt_bytea(data bytea, key text, parms text) returns bytea
pgp_decrypt_bytea(data bytea, key text, parms text) returns bytea
Parameter names I lifted from gpg:
pgp_encrypt('message', 'key', 'compress-algo=1,cipher-algo=aes256')
For text data, pgp_encrypt simply encrypts the PostgreSQL internal data.
This maps to RFC2440 data type 't' - 'extenally specified encoding'.
But this may cause problems if data is dumped and reloaded into database
which as different internal encoding. My next goal is to implement data
type 'u' - which means data is in UTF-8 encoding by converting internal
encoding to UTF-8 and back. And there wont be any compatibility
problems with current code, I think its ok to submit this without UTF-8
encoding by converting internal encoding to UTF-8 and back. And there
wont be any compatibility problems with current code, I think its ok to
submit this without UTF-8 support.
Here is v4 of PGP encrypt. This depends on previously sent
Fortuna-patch, as it uses the px_add_entropy function.
- New function: pgp_key_id() for finding key id's.
- Add SHA1 of user data and key into RNG pools. We need to get
randomness from somewhere, and it is in user best interests
to contribute.
- Regenerate pgp-armor test for SQL_ASCII database.
- Cleanup the key handling so that the pubkey support is less
hackish.
Marko Kreen
- Move openssl random provider to openssl.c and builtin provider
to internal.c
- Make px_random_bytes use Fortuna, instead of giving error.
- Retarget random.c to aquiring system randomness, for initial seeding
of Fortuna. There is ATM 2 functions for Windows,
reader from /dev/urandom and the regular time()/getpid() silliness.
Marko Kreen
functions as STRICT, and all functions except gen_salt() as IMMUTABLE.
gen_salt() is VOLATILE.
Although the functions are now STRICT, I left their PG_ARGISNULL()
checks in place as a protective measure for users who install the
new code but use old (non-STRICT) catalog entries (e.g., restored
from a dump). Per recent discussion in pgsql-hackers.
Patch from Michael Fuhr.
to make. We ship the table file in the tarball and so this dependency
just opens file timestamp skew problems without doing anything useful.
(Not that it should hurt, either ... except for cross-compile builds.)
chdir into PGDATA and subsequently use relative paths instead of absolute
paths to access all files under PGDATA. This seems to give a small
performance improvement, and it should make the system more robust
against naive DBAs doing things like moving a database directory that
has a live postmaster in it. Per recent discussion.
(currently in beta) when cryptolib = openssl. According to the
following checkin message from several years ago, OpenSSL application
developers should no longer rely on <openssl/evp.h> to include
everything they need:
http://cvs.openssl.org/chngview?cn=9888
This patch adds the necessary header files. It doesn't appear to
break anything when building against OpenSSL 0.9.7.
BTW, core appears to build and work fine with OpenSSL 0.9.8. I've
built 7.3 through HEAD against 0.9.8-beta6 without noticing any
problems.
Michael Fuhr
- Fix wrong index results on text, char, varchar for multibyte strings
- Fix some SIGFPE signals
- Add support for infinite timestamps
- Because of locale settings, btree_gist can not be a prefix index anymore (for text).
Each node holds now just the lower and upper boundary.
current time: provide a GetCurrentTimestamp() function that returns
current time in the form of a TimestampTz, instead of separate time_t
and microseconds fields. This is what all the callers really want
anyway, and it eliminates low-level dependencies on AbsoluteTime,
which is a deprecated datatype that will have to disappear eventually.
literally.
Add GUC variables:
"escape_string_warning" - warn about backslashes in non-E strings
"escape_string_syntax" - supports E'' syntax?
"standard_compliant_strings" - treats backslashes literally in ''
Update code to use E'' when escapes are used.
to the existing X-direction tests. An rtree class now includes 4 actual
2-D tests, 4 1-D X-direction tests, and 4 1-D Y-direction tests.
This involved adding four new Y-direction test operators for each of
box and polygon; I followed the PostGIS project's lead as to the names
of these operators.
NON BACKWARDS COMPATIBLE CHANGE: the poly_overleft (&<) and poly_overright
(&>) operators now have semantics comparable to box_overleft and box_overright.
This is necessary to make r-tree indexes work correctly on polygons.
Also, I changed circle_left and circle_right to agree with box_left and
box_right --- formerly they allowed the boundaries to touch. This isn't
actually essential given the lack of any r-tree opclass for circles, but
it seems best to sync all the definitions while we are at it.
polygon operators (<<, &<, >>, &>). Per ideas originally put forward
by andrew@supernews and later rediscovered by moi. This patch just
fixes the existing opclasses, and does not add any new behavior as I
proposed earlier; that can be sorted out later. In principle this
could be back-patched, since it changes only search behavior and not
system catalog entries nor rtree index contents. I'm not currently
planning to do that, though, since I think it could use more testing.
a physically separate type. Defining 'lo' as a domain over OID works
just fine and is more efficient. Improve documentation and fix up the
test script. (Would like to turn test script into a proper regression
test, but right now its output is not constant because of numeric OIDs;
plus it makes Unix-specific assumptions about files it can import.)
unlike template0 and template1 does not have any special status in
terms of backend functionality. However, all external utilities such
as createuser and createdb now connect to "postgres" instead of
template1, and the documentation is changed to encourage people to use
"postgres" instead of template1 as a play area. This should fix some
longstanding gotchas involving unexpected propagation of database
objects by createdb (when you used template1 without understanding
the implications), as well as ameliorating the problem that CREATE
DATABASE is unhappy if anyone else is connected to template1.
Patch by Dave Page, minor editing by Tom Lane. All per recent
pghackers discussions.
includes error checking and an appropriate ereport(ERROR) message.
This gets rid of rather tedious and error-prone manipulation of errno,
as well as a Windows-specific bug workaround, at more than a dozen
call sites. After an idea in a recent patch by Heikki Linnakangas.
it is sufficient to track whether a backend holds a lock or not, and
store information about transaction vs. session locks only in the
inside-the-backend LocalLockTable. Since there can now be but one
PROCLOCK per lock per backend, LockCountMyLocks() is no longer needed,
thus eliminating some O(N^2) behavior when a backend holds many locks.
Also simplify the LockAcquire/LockRelease API by passing just a
'sessionLock' boolean instead of a transaction ID. The previous API
was designed with the idea that per-transaction lock holding would be
important for subtransactions, but now that we have subtransactions we
know that this is unwanted. While at it, add an 'isTempObject' parameter
to LockAcquire to indicate whether the lock is being taken on a temp
table. This is not used just yet, but will be needed shortly for
two-phase commit.
and RelationNameGetTupleDesc() as deprecated; remove uses of the
latter in the contrib library. Along the way, clean up crosstab()
code and documentation a little.
are now reported via elog, eliminating the need to test the result code
at most call sites. Make it possible for the caller to distinguish a
freshly acquired lock from one already held in the current transaction.
Use that capability to avoid redundant AcceptInvalidationMessages() calls
in LockRelation().
spotted by Qingqing Zhou. The HASH_ENTER action now automatically
fails with elog(ERROR) on out-of-memory --- which incidentally lets
us eliminate duplicate error checks in quite a bunch of places. If
you really need the old return-NULL-on-out-of-memory behavior, you
can ask for HASH_ENTER_NULL. But there is now an Assert in that path
checking that you aren't hoping to get that behavior in a palloc-based
hash table.
Along the way, remove the old HASH_FIND_SAVE/HASH_REMOVE_SAVED actions,
which were not being used anywhere anymore, and were surely too ugly
and unsafe to want to see revived again.
Also, remove the rather useless return value of LockReleaseAll. Change
response to detection of corruption in the shared lock tables to PANIC,
since that is the only way of cleaning up fully.
Originally an idea of Heikki Linnakangas, variously hacked on by
Alvaro Herrera and Tom Lane.
for testing PLs and contrib_regression for testing contrib, instead of
overwriting the core system's regression database as formerly done.
Andrew Dunstan
external projects, we should be careful about what parts of the GiST
API are considered implementation details, and which are part of the
public API. Therefore, I've moved internal-only declarations into
gist_private.h -- future backward-incompatible changes to gist.h should
be made with care, to avoid needlessly breaking external GiST extensions.
Also did some related header cleanup: remove some unnecessary #includes
from gist.h, and remove some unused definitions: isAttByVal(), _gistdump(),
and GISTNStrategies.
which is neither needed by nor related to that header. Remove the bogus
inclusion and instead include the header in those C files that actually
need it. Also fix unnecessary inclusions and bad inclusion order in
tsearch2 files.
that return INTERNAL without also having INTERNAL arguments. Since the
functions in question aren't meant to be called by hand anyway, I just
redeclared them to take 'internal' instead of 'text'. Also add code
to ProcedureCreate() to enforce the restriction, as I should have done
to start with :-(
Essentially, we shoehorn in a lockable-object-type field by taking
a byte away from the lockmethodid, which can surely fit in one byte
instead of two. This allows less artificial definitions of all the
other fields of LOCKTAG; we can get rid of the special pg_xactlock
pseudo-relation, and also support locks on individual tuples and
general database objects (including shared objects). None of those
possibilities are actually exploited just yet, however.
I removed pg_xactlock from pg_class, but did not force initdb for
that change. At this point, relkind 's' (SPECIAL) is unused and
could be removed entirely.
command line. We find this useful because we frequently deal with
thousands of tables in an environment where neither the databases nor
the tables are updated frequently. This helps allow us to cut down on
the overhead of updating the list for every other primary loop of
pg_autovacuum.
I chose -i as the command-line argument and documented it briefly in
the README.
The patch was applied to the 7.4.7 version of pg_autovacuum in contrib.
Thomas F.O'Connell
indexes. Replace all heap_openr and index_openr calls by heap_open
and index_open. Remove runtime lookups of catalog OID numbers in
various places. Remove relcache's support for looking up system
catalogs by name. Bulky but mostly very boring patch ...
change saves a great deal of space in pg_proc and its primary index,
and it eliminates the former requirement that INDEX_MAX_KEYS and
FUNC_MAX_ARGS have the same value. INDEX_MAX_KEYS is still embedded
in the on-disk representation (because it affects index tuple header
size), but FUNC_MAX_ARGS is not. I believe it would now be possible
to increase FUNC_MAX_ARGS at little cost, but haven't experimented yet.
There are still a lot of vestigial references to FUNC_MAX_ARGS, which
I will clean up in a separate pass. However, getting rid of it
altogether would require changing the FunctionCallInfoData struct,
and I'm not sure I want to buy into that.
* test error handling
* add tests for des, 3des, cast5
* add some tests to blowfish, rijndael
* Makefile: ability to specify different tests for different crypto
libraries, so we can skip des, 3des and cast5 for builtin.
Marko Kreen
Reserve px_get_random_bytes() for strong randomness,
add new function px_get_pseudo_random_bytes() for
weak randomness and use it in gen_salt().
On openssl case, use RAND_pseudo_bytes() for
px_get_pseudo_random_bytes().
Final result is that is user has not configured random
souce but kept the 'silly' one, gen_salt() keeps
working, but pgp_encrypt() will throw error.
Marko Kreen
* openssl.c: Add 3des and AES support
* README.pgcrypto: list only supported ciphers for openssl
OpenSSL has pre-processor symbol OPENSSL_NO_AES, which
isn't that helpful for detecting if it _does_ exist.
Thus the hack with AES_ENCRYPT.
Marko Kreen
* Use error codes instead of -1
* px_strerror for new error codes
* calling convention change for px_gen_salt - return error code
* use px_strerror in pgcrypto.c
Marko Kreen
It was a bad style to begin with, and now several loops can be clearer.
* pgcrypto.c: Fix function comments
* crypt-gensalt.c, crypt-blowfish.c: stop messing with errno
* openssl.c: use px_free instead pfree
* px.h: make redefining px_alloc/px_realloc/px_free easier
Marko Kreen
libmcrypt seems to dead, maintainer address bounces,
and cast-128 fails on 2 of the 3 test vectors from RFC2144.
So I see no reason to keep around stuff I don't trust
anymore.
Support for several crypto libraries is probably only
confusing to users, although it was good for initial
developing - it helped to find hidden assumptions and
forced me to create regression tests for all functionality.
Marko Kreen
can tell whether it is being used as an aggregate or not. This allows
such a function to avoid re-pallocing a pass-by-reference transition
value; normally it would be unsafe for a function to scribble on an input,
but in the aggregate case it's safe to reuse the old transition value.
Make int8inc() do this. This gets a useful improvement in the speed of
COUNT(*), at least on narrow tables (it seems to be swamped by I/O when
the table rows are wide). Per a discussion in early December with
Neil Conway. I also fixed int_aggregate.c to check this, thereby
turning it into something approaching a supportable technique instead
of being a crude hack.
0.9.7x have EVP_DigestFinal function which which clears all of
EVP_MD_CTX. This makes pgcrypto crash in functions which
re-use one digest context several times: hmac() and crypt()
with md5 algorithm.
Following patch fixes it by carring the digest info around
EVP_DigestFinal and re-initializing cipher.
Marko Kreen.
compares two strings' soundex values for similarity, from Kris Jurka.
Also mark the text_soundex() function as STRICT, to avoid crashing
on NULL input.
regression=# select to_tsquery( '\'fotballklubber\'');
to_tsquery
------------------------------------------------
'fotball' & 'klubb' | 'fot' & 'ball' & 'klubb'
(1 row)
So, changed interface to dictionaries, lexize method of dictionary shoud return
pointer to aray of TSLexeme structs instead of char**. Last element should
have TSLexeme->lexeme == NULL.
typedef struct {
/* number of variant of split word , for example
Word 'fotballklubber' (norwegian) has two varian to split:
( fotball, klubb ) and ( fot, ball, klubb ). So, dictionary
should return:
nvariant lexeme
1 fotball
1 klubb
2 fot
2 ball
2 klubb
*/
uint16 nvariant;
/* currently unused */
uint16 flags;
/* C-string */
char *lexeme;
} TSLexeme;
typedef struct {} WordEntryPos;
to
typedef uint16 WordEntryPos
according to http://www.pgsql.ru/db/mw/msg.html?mid=2035188
Require re-fill all tsvector fields and reindex tsvector indexes.
- Dependency services may not be correctly registered when installing as
a Windows Service.
- The sleep time is changed from milliseconds to seconds as it should
be.
- Error messages during service installation/removal are logged to
stderr.
1 Report error message instead of do nothing in case of error in regex
2 Malloced storage for mask, find and repl part of Affix. This parts may be
large enough in real life (for example in czech, thanks to moje <moje@kalhotky.net>)
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
checks, to ensure the previous test backend has time to quit out of the
regression database. Also, allow all the checks to be run even if one
of them fails. Per suggestions from Andrew Dunstan to improve the
usefulness of buildfarm testing.
> > Windows service, it says you can use the -I and -R options.
> >
> > When I do that and I specify a password with '-P'
> (uppercase) then in
> > the registry it's saved as '-p' (lowercase) in the
> service-commandline
> > (ImagePath).
This was fixed in v1.21 of pg_autovacuum.c, That rev is tagged for
beta3, so you should not be seeing this issue unless you actually have
an older version for some reason.
http://developer.postgresql.org/cvsweb.cgi/pgsql/contrib/pg_autovacuum/p
g_autovacuum.c.diff?r1=1.20;r2=1.21;f=h
> > Also it removes the quotes I added and I'm not so sure it
> would work
> > the way it's supposed to, without it.
It's not so much that it strips them (that happens automagically), more
that it doesn't re-add them when it writes the command line in the
registry. The attached patch fixes that by simply quoting all options
that may need it.
> > If you add DependOnService (a REG_MULTI_SZ an
> array-like-thingie) and
> > have the name (in this case: pgsql-8.0-beta2-dev3) of a service it
> > depends on, it will not fail to start (it will not even try, as
> > PostgreSQL is not running), when PostgreSQL already failed.
> >
> > Maybe it's an idea to specify it on the commandline (what
> service to
> > depend on).
A -E <service> option is added in the attached patch.
Dave Page
warnings:
- remove pointless "extern" keyword from some function definitions in
contrib/tsearch2
- use "NULL" not "0" as NULL pointer in contrib/tsearch,
contrib/tsearch2, contrib/pgbench, and contrib/vacuumlo
clause implicitly whenever one is not given explicitly. Remove concept
of a schema having an associated tablespace, and simplify the rules for
selecting a default tablespace for a table or index. It's now just
(a) explicit TABLESPACE clause; (b) default_tablespace if that's not an
empty string; (c) database's default. This will allow pg_dump to use
SET commands instead of tablespace clauses to determine object locations
(but I didn't actually make it do so). All per recent discussions.
- add some additional files to the dbmirror install (approved by
ssinger)
- add a makefile for contrib/mysql, and add mysql to the list of
contribs build by default
- use xml2-config to pickup -I flags for libxml2 in contrib/xml and
contrib/xml2
Original work from Martin Pitt of Debian, minor cleanups by Neil
Conway.
