Commit c9b0cbe98b accidentally broke the
order of operations during postmaster shutdown: it resulted in removing
the per-socket lockfiles after, not before, postmaster.pid. This creates
a race-condition hazard for a new postmaster that's started immediately
after observing that postmaster.pid has disappeared; if it sees the
socket lockfile still present, it will quite properly refuse to start.
This error appears to be the explanation for at least some of the
intermittent buildfarm failures we've seen in the pg_upgrade test.
Another problem, which has been there all along, is that the postmaster
has never bothered to close() its listen sockets, but has just allowed them
to close at process death. This creates a different race condition for an
incoming postmaster: it might be unable to bind to the desired listen
address because the old postmaster is still incumbent. This might explain
some odd failures we've seen in the past, too. (Note: this is not related
to the fact that individual backends don't close their client communication
sockets. That behavior is intentional and is not changed by this patch.)
Fix by adding an on_proc_exit function that closes the postmaster's ports
explicitly, and (in 9.3 and up) reshuffling the responsibility for where
to unlink the Unix socket files. Lock file unlinking can stay where it
is, but teach it to unlink the lock files in reverse order of creation.
In investigating yesterday's crash report from Hugo Osvaldo Barrera, I only
looked back as far as commit f3aec2c7f5 where the breakage occurred
(which is why I thought the IPv4-in-IPv6 business was undocumented). But
actually the logic dates back to commit 3c9bb8886d and was simply
broken by erroneous refactoring in the later commit. A bit of archives
excavation shows that we added the whole business in response to a report
that some 2003-era Linux kernels would report IPv4 connections as having
IPv4-in-IPv6 addresses. The fact that we've had no complaints since 9.0
seems to be sufficient confirmation that no modern kernels do that, so
let's just rip it all out rather than trying to fix it.
Do this in the back branches too, thus essentially deciding that our
effective behavior since 9.0 is correct. If there are any platforms on
which the kernel reports IPv4-in-IPv6 addresses as such, yesterday's fix
would have made for a subtle and potentially security-sensitive change in
the effective meaning of IPv4 pg_hba.conf entries, which does not seem like
a good thing to do in minor releases. So let's let the post-9.0 behavior
stand, and change the documentation to match it.
In passing, I failed to resist the temptation to wordsmith the description
of pg_hba.conf IPv4 and IPv6 address entries a bit. A lot of this text
hasn't been touched since we were IPv4-only.
If any error occurred while we were in the middle of reading a protocol
message from the client, we could lose sync, and incorrectly try to
interpret a part of another message as a new protocol message. That will
usually lead to an "invalid frontend message" error that terminates the
connection. However, this is a security issue because an attacker might
be able to deliberately cause an error, inject a Query message in what's
supposed to be just user data, and have the server execute it.
We were quite careful to not have CHECK_FOR_INTERRUPTS() calls or other
operations that could ereport(ERROR) in the middle of processing a message,
but a query cancel interrupt or statement timeout could nevertheless cause
it to happen. Also, the V2 fastpath and COPY handling were not so careful.
It's very difficult to recover in the V2 COPY protocol, so we will just
terminate the connection on error. In practice, that's what happened
previously anyway, as we lost protocol sync.
To fix, add a new variable in pqcomm.c, PqCommReadingMsg, that is set
whenever we're in the middle of reading a message. When it's set, we cannot
safely ERROR out and continue running, because we might've read only part
of a message. PqCommReadingMsg acts somewhat similarly to critical sections
in that if an error occurs while it's set, the error handler will force the
connection to be terminated, as if the error was FATAL. It's not
implemented by promoting ERROR to FATAL in elog.c, like ERROR is promoted
to PANIC in critical sections, because we want to be able to use
PG_TRY/CATCH to recover and regain protocol sync. pq_getmessage() takes
advantage of that to prevent an OOM error from terminating the connection.
To prevent unnecessary connection terminations, add a holdoff mechanism
similar to HOLD/RESUME_INTERRUPTS() that can be used hold off query cancel
interrupts, but still allow die interrupts. The rules on which interrupts
are processed when are now a bit more complicated, so refactor
ProcessInterrupts() and the calls to it in signal handlers so that the
signal handlers always call it if ImmediateInterruptOK is set, and
ProcessInterrupts() can decide to not do anything if the other conditions
are not met.
Reported by Emil Lenngren. Patch reviewed by Noah Misch and Andres Freund.
Backpatch to all supported versions.
Security: CVE-2015-0244
This was not changed in HEAD, but will be done later as part of a
pgindent run. Future pgindent runs will also do this.
Report by Tom Lane
Backpatch through all supported branches, but not HEAD
The code for matching clients to pg_hba.conf lines that specify host names
(instead of IP address ranges) failed to complain if reverse DNS lookup
failed; instead it silently didn't match, so that you might end up getting
a surprising "no pg_hba.conf entry for ..." error, as seen in bug #9518
from Mike Blackwell. Since we don't want to make this a fatal error in
situations where pg_hba.conf contains a mixture of host names and IP
addresses (clients matching one of the numeric entries should not have to
have rDNS data), remember the lookup failure and mention it as DETAIL if
we get to "no pg_hba.conf entry". Apply the same approach to forward-DNS
lookup failures, too, rather than treating them as immediate hard errors.
Along the way, fix a couple of bugs that prevented us from detecting an
rDNS lookup error reliably, and make sure that we make only one rDNS lookup
attempt; formerly, if the lookup attempt failed, the code would try again
for each host name entry in pg_hba.conf. Since more or less the whole
point of this design is to ensure there's only one lookup attempt not one
per entry, the latter point represents a performance bug that seems
sufficient justification for back-patching.
Also, adjust src/port/getaddrinfo.c so that it plays as well as it can
with this code. Which is not all that well, since it does not have actual
support for rDNS lookup, but at least it should return the expected (and
required by spec) error codes so that the main code correctly perceives the
lack of functionality as a lookup failure. It's unlikely that PG is still
being used in production on any machines that require our getaddrinfo.c,
so I'm not excited about working harder than this.
To keep the code in the various branches similar, this includes
back-patching commits c424d0d105 and
1997f34db4 into 9.2 and earlier.
Back-patch to 9.1 where the facility for hostnames in pg_hba.conf was
introduced.
We had two copies of this function in the backend and libpq, which was
already pretty bogus, but it turns out that we need it in some other
programs that don't use libpq (such as pg_test_fsync). So put it where
it probably should have been all along. The signal-mask-initialization
support in src/backend/libpq/pqsignal.c stays where it is, though, since
we only need that in the backend.
Instead of just reporting which user failed to log in, log both the
line number in the active pg_hba.conf file (which may not match reality
in case the file has been edited and not reloaded) and the contents of
the matching line (which will always be correct), to make it easier
to debug incorrect pg_hba.conf files.
The message to the client remains unchanged and does not include this
information, to prevent leaking security sensitive information.
Reviewed by Tom Lane and Dean Rasheed
The length of a socket path name is constrained by the size of struct
sockaddr_un, and there's not a lot we can do about it since that is a
kernel API. However, it would be a good thing if we produced an
intelligible error message when the user specifies a socket path that's too
long --- and getaddrinfo's standard API is too impoverished to do this in
the natural way. So insert explicit tests at the places where we construct
a socket path name. Now you'll get an error that makes sense and even
tells you what the limit is, rather than something generic like
"Non-recoverable failure in name resolution".
Per trouble report from Jeremy Drake and a fix idea from Andrew Dunstan.
4TB large objects (standard 8KB BLCKSZ case). For this purpose new
libpq API lo_lseek64, lo_tell64 and lo_truncate64 are added. Also
corresponding new backend functions lo_lseek64, lo_tell64 and
lo_truncate64 are added. inv_api.c is changed to handle 64-bit
offsets.
Patch contributed by Nozomi Anzai (backend side) and Yugo Nagata
(frontend side, docs, regression tests and example program). Reviewed
by Kohei Kaigai. Committed by Tatsuo Ishii with minor editings.
Similar changes were done to pg_hba.conf earlier already, this commit makes
pg_ident.conf to behave the same as pg_hba.conf.
This has two user-visible effects. First, if pg_ident.conf contains multiple
errors, the whole file is parsed at postmaster startup time and all the
errors are immediately reported. Before this patch, the file was parsed and
the errors were reported only when someone tries to connect using an
authentication method that uses the file, and the parsing stopped on first
error. Second, if you SIGHUP to reload the config files, and the new
pg_ident.conf file contains an error, the error is logged but the old file
stays in effect.
Also, regular expressions in pg_ident.conf are now compiled only once when
the file is loaded, rather than every time the a user is authenticated. That
should speed up authentication if you have a lot of regexps in the file.
Amit Kapila
Replace unix_socket_directory with unix_socket_directories, which is a list
of socket directories, and adjust postmaster's code to allow zero or more
Unix-domain sockets to be created.
This is mostly a straightforward change, but since the Unix sockets ought
to be created after the TCP/IP sockets for safety reasons (better chance
of detecting a port number conflict), AddToDataDirLockFile needs to be
fixed to support out-of-order updates of data directory lockfile lines.
That's a change that had been foreseen to be necessary someday anyway.
Honza Horak, reviewed and revised by Tom Lane
Both libpq and the backend would truncate a common name extracted from a
certificate at 32 bytes. Replace that fixed-size buffer with dynamically
allocated string so that there is no hard limit. While at it, remove the
code for extracting peer_dn, which we weren't using for anything; and
don't bother to store peer_cn longer than we need it in libpq.
This limit was not so terribly unreasonable when the code was written,
because we weren't using the result for anything critical, just logging it.
But now that there are options for checking the common name against the
server host name (in libpq) or using it as the user's name (in the server),
this could result in undesirable failures. In the worst case it even seems
possible to spoof a server name or user name, if the correct name is
exactly 32 bytes and the attacker can persuade a trusted CA to issue a
certificate in which that string is a prefix of the certificate's common
name. (To exploit this for a server name, he'd also have to send the
connection astray via phony DNS data or some such.) The case that this is
a realistic security threat is a bit thin, but nonetheless we'll treat it
as one.
Back-patch to 8.4. Older releases contain the faulty code, but it's not
a security problem because the common name wasn't used for anything
interesting.
Reported and patched by Heikki Linnakangas
Security: CVE-2012-0867
This allows changing the location of the files that were previously
hard-coded to server.crt, server.key, root.crt, root.crl.
server.crt and server.key continue to be the default settings and are
thus required to be present by default if SSL is enabled. But the
settings for the server-side CA and CRL are now empty by default, and
if they are set, the files are required to be present. This replaces
the previous behavior of ignoring the functionality if the files were
not found.
As per my recent proposal, this refactors things so that these typedefs and
macros are available in a header that can be included in frontend-ish code.
I also changed various headers that were undesirably including
utils/timestamp.h to include datatype/timestamp.h instead. Unsurprisingly,
this showed that half the system was getting utils/timestamp.h by way of
xlog.h.
No actual code changes here, just header refactoring.
The previous coding was ugly, as it marked special tokens as such in the
wrong stage, relying on workarounds to figure out if they had been
quoted in the original or not. This made it impossible to have specific
keywords be recognized as such only in certain positions in HBA lines,
for example. Fix by restructuring the parser code so that it remembers
whether tokens were quoted or not. This eliminates widespread knowledge
of possible known keywords for all fields.
Also improve memory management in this area, to use memory contexts that
are reset as a whole instead of using retail pfrees; this removes a
whole lotta crufty (and probably slow) code.
Instead of calling strlen() three times in next_field_expand on the
returned token to find out whether there was a comma (and strip it),
pass back the info directly from the callee, which is simpler.
In passing, update historical artifacts in hba.c API.
Authors: Brendan Jurd, Alvaro Herrera
Reviewed by Pavel Stehule
than replication_timeout (a new GUC) milliseconds. The TCP timeout is often
too long, you want the master to notice a dead connection much sooner.
People complained about that in 9.0 too, but with synchronous replication
it's even more important to notice dead connections promptly.
Fujii Masao and Heikki Linnakangas
This removes an overloading of two authentication options where
one is very secure (peer) and one is often insecure (ident). Peer
is also the name used in libpq from 9.1 to specify the same type
of authentication.
Also make initdb select peer for local connections when ident is
chosen, and ident for TCP connections when peer is chosen.
ident keyword in pg_hba.conf is still accepted and maps to peer
authentication.
binary, revert PGDLLIMPORT decoration of global variables. I'm not sure
if there's any real harm from unnecessary PGDLLIMPORTs, but these are all
internal variables that external modules really shouldn't be messing
with. ThisTimeLineID still needs PGDLLIMPORT.
This includes two new kinds of postmaster processes, walsenders and
walreceiver. Walreceiver is responsible for connecting to the primary server
and streaming WAL to disk, while walsender runs in the primary server and
streams WAL from disk to the client.
Documentation still needs work, but the basics are there. We will probably
pull the replication section to a new chapter later on, as well as the
sections describing file-based replication. But let's do that as a separate
patch, so that it's easier to see what has been added/changed. This patch
also adds a new section to the chapter about FE/BE protocol, documenting the
protocol used by walsender/walreceivxer.
Bump catalog version because of two new functions,
pg_last_xlog_receive_location() and pg_last_xlog_replay_location(), for
monitoring the progress of replication.
Fujii Masao, with additional hacking by me
This silences some warnings on Win64. Not using the proper SOCKET datatype
was actually wrong on Win32 as well, but didn't cause any warnings there.
Also create define PGINVALID_SOCKET to indicate an invalid/non-existing
socket, instead of using a hardcoded -1 value.
This was possibly linked to a deadlock-like situation in glibc syslog code
invoked by the ereport call in quickdie(). In any case, a signal handler
should not unblock its own signal unless there is a specific reason to.
does a search for the user in the directory first, and then binds with
the DN found for this user.
This allows for LDAP logins in scenarios where the DN of the user cannot
be determined simply by prefix and suffix, such as the case where different
users are located in different containers.
The old way of authentication can be significantly faster, so it's kept
as an option.
Robert Fleming and Magnus Hagander
(That flat file is now completely useless, but removal will come later.)
To do this, postpone client authentication into the startup transaction
that's run by InitPostgres. We still collect the startup packet and do
SSL initialization (if needed) at the same time we did before. The
AuthenticationTimeout is applied separately to startup packet collection
and the actual authentication cycle. (This is a bit annoying, since it
means a couple extra syscalls; but the signal handling requirements inside
and outside a transaction are sufficiently different that it seems best
to treat the timeouts as completely independent.)
A small security disadvantage is that if the given database name is invalid,
this will be reported to the client before any authentication happens.
We could work around that by connecting to database "postgres" instead,
but consensus seems to be that it's not worth introducing such surprising
behavior.
Processing of all command-line switches and GUC options received from the
client is now postponed until after authentication. This means that
PostAuthDelay is much less useful than it used to be --- if you need to
investigate problems during InitPostgres you'll have to set PreAuthDelay
instead. However, allowing an unauthenticated user to set any GUC options
whatever seems a bit too risky, so we'll live with that.
