byte-swapping on the port number which causes the call to fail on Intel
Macs.
This patch uses htons() instead of htonl() and fixes this bug.
Ashley Clark
2005-05-13. When we find that a new inner tuple can't possibly match any
outer tuple (because it contains a NULL), we can't immediately skip the
tuple when we are in NEXTINNER state. Doing so can lead to emitting
multiple copies of the tuple in FillInner mode, because we may rescan the
tuple after returning to a previous marked tuple. Instead, proceed to
NEXTOUTER state the same as we used to do. After we've found that there's
no need to return to the marked position, we can go to SKIPINNER_ADVANCE
state instead of SKIP_TEST when the inner tuple is unmatchable; this
preserves the performance improvement. Per bug report from Bruce.
I also made a couple of cosmetic code rearrangements and added a regression
test for the problem.
we are not holding a buffer content lock; where it was, InterruptHoldoffCount
is positive and so we'd not respond to cancel signals as intended. Also
add missing vacuum_delay_point() call in btvacuumcleanup. This should fix
complaint from Evgeny Gridasov about failure to respond to SIGINT/SIGTERM
in a timely fashion (bug #2257).
Var referencing the subselect output. While this case could possibly be made
to work, it seems not worth expending effort on. Per report from Magnus
Naeslund(f).
id (CVE-2006-0553). Also fix related bug in SET SESSION AUTHORIZATION that
allows unprivileged users to crash the server, if it has been compiled with
Asserts enabled. The escalation-of-privilege risk exists only in 8.1.0-8.1.2.
However, the Assert-crash risk exists in all releases back to 7.3.
Thanks to Akio Ishida for reporting this problem.
regardless of the current schema search path. Since CREATE OPERATOR CLASS
only allows one default opclass per datatype regardless of schemas, this
should have minimal impact, and it fixes problems with failure to find a
desired opclass while restoring dump files. Per discussion at
http://archives.postgresql.org/pgsql-hackers/2006-02/msg00284.php.
Remove now-redundant-or-unused code in typcache.c and namespace.c,
and backpatch as far as 8.0.
it later. This fixes a problem where EXEC_BACKEND didn't have progname
set, causing a segfault if log_min_messages was set below debug2 and our
own snprintf.c was being used.
Also alway strdup() progname.
Backpatch to 8.1.X and 8.0.X.
to avoid sharing substructure with the lower-level indexquals. This is
currently only an issue if there are SubPlans in the indexquals, which is
uncommon but not impossible --- see bug #2218 reported by Nicholas Vinen.
We use the same kluge for indexqual vs indexqualorig in the index scans
themselves ... would be nice to clean this up someday.
requested sort order. It was assuming that build_index_pathkeys always
generates a pathkey per index column, which was not true if implied equality
deduction had determined that two index columns were effectively equated to
each other. Simplest fix seems to be to install an option that causes
build_index_pathkeys to support this behavior as well as the original one.
Per report from Brian Hirt.
While we normally prefer the notation "foo.*" for a whole-row Var, that does
not work at SELECT top level, because in that context the parser will assume
that what is wanted is to expand the "*" into a list of separate target
columns, yielding behavior different from a whole-row Var. We have to emit
just "foo" instead in that context. Per report from Sokolov Yura.
to try to create a log segment file concurrently, but the code erroneously
specified O_EXCL to open(), resulting in a needless failure. Before 7.4,
it was even a PANIC condition :-(. Correct code is actually simpler than
what we had, because we can just say O_CREAT to start with and not need a
second open() call. I believe this accounts for several recent reports of
hard-to-reproduce "could not create file ...: File exists" errors in both
pg_clog and pg_subtrans.
temp table not only our own process' tables. It's not real important
since vacuum.c will skip temp tables anyway, but might as well make the
code do what it claims to do.
index's support-function cache (in index_getprocinfo). Since none of that
data can change for an index that's in active use, it seems sufficient to
treat all open indexes the same way we were treating "nailed" system indexes
--- that is, just re-read the pg_class row and leave the rest of the relcache
entry strictly alone. The pg_class re-read might not be strictly necessary
either, but since the reltablespace and relfilenode can change in normal
operation it seems safest to do it. (We don't support changing any of the
other info about an index at all, at the moment.)
Back-patch as far as 8.0. It might be possible to adapt the patch to 7.4,
but it would take more work than I care to expend for such a low-probability
problem. 7.3 is out of luck for sure.
occurs when it tries to heap_open pg_tablespace. When control returns to
smgrcreate, that routine will be holding a dangling pointer to a closed
SMgrRelation, resulting in mayhem. This is of course a consequence of
the violation of proper module layering inherent in having smgr.c call
a tablespace command routine, but the simplest fix seems to be to change
the locking mechanism. There's no real need for TablespaceCreateDbspace
to touch pg_tablespace at all --- it's only opening it as a way of locking
against a parallel DROP TABLESPACE command. A much better answer is to
create a special-purpose LWLock to interlock these two operations.
This drops TablespaceCreateDbspace quite a few layers down the food chain
and makes it something reasonably safe for smgr to call.
This is utterly insignificant in normal operation, but it becomes a
problem during cache inval stress testing. The original coding in fact
had no leak --- the 8.0 List rewrite created the issue. I wonder whether
list_concat should pfree the discarded header?
files: avoid creating stats hashtable entries for tables that aren't being
touched except by vacuum/analyze, ensure that entries for dropped tables are
removed promptly, and tweak the data layout to avoid storing useless struct
padding. Also improve the performance of pgstat_vacuum_tabstat(), and make
sure that autovacuum invokes it exactly once per autovac cycle rather than
multiple times or not at all. This should cure recent complaints about 8.1
showing much higher stats I/O volume than was seen in 8.0. It'd still be a
good idea to revisit the design with an eye to not re-writing the entire
stats dataset every half second ... but that would be too much to backpatch,
I fear.
discarded by cache flush while still in use. This is a minimal patch that
just copies the tupdesc anywhere it could be needed across a flush. Applied
to back branches only; Neil Conway is working on a better long-term solution
for HEAD.
our own command (or more generally, xmin = our xact and cmin >= current
command ID) should not be seen as good. Else we may try to update rows
we already updated. This error was inserted last August while fixing the
even bigger problem that the old coding wouldn't see *any* tuples inserted
by our own transaction as good. Per report from Euler Taveira de Oliveira.
use it. While it normally has been opened earlier during btree index
build, testing shows that it's possible for the link to be closed again
if an sinval reset occurs while the index is being built.
dead and have become unreferenced. Before 8.1, such members were left
for AtEOXact_CatCache() to clean up, but now AtEOXact_CatCache isn't
supposed to have anything to do. In an assert-enabled build this bug
leads to an assertion failure at transaction end, but in a non-assert
build the dead member is effectively just a small memory leak.
Per report from Jeremy Drake.
rather than elog(FATAL), when there is no more room in ShmemBackendArray.
This is a security issue since too many connection requests arriving close
together could cause the postmaster to shut down, resulting in denial of
service. Reported by Yoshiyuki Asaba, fixed by Magnus Hagander.
the relation but it finds a pre-existing valid buffer. The buffer does not
correspond to any page known to the kernel, so we *must* do smgrextend to
ensure that the space becomes allocated. The 7.x branches all do this
correctly, but the corner case got lost somewhere during 8.0 bufmgr rewrites.
(My fault no doubt :-( ... I think I assumed that such a buffer must be
not-BM_VALID, which is not so.)
from Andrus Moor. The former state-machine-style coding wasn't actually
doing much except obscuring the control flow, and it didn't extend
readily to fix this case, so I just took it out. Also, add a
YY_FLUSH_BUFFER call to ensure the lexer is reset correctly if the
previous scan failed partway through the file.
selection of a field from the result of a function returning RECORD.
I believe this case is new in 8.1; it's due to the addition of OUT parameters.
Per example from Michael Fuhr.
if (c == '\\' && cstate->line_buf.len == 0)
The problem with that is the because of the input and _output_
buffering, cstate->line_buf.len could be zero even if we are not on the
first character of a line. In fact, for a typical line, it is zero for
all characters on the line. The proper solution is to introduce a
boolean, first_char_in_line, that we set as we enter the loop and clear
once we process a character.
I have restructured the line-reading code in copy.c by:
o merging the CSV/non-CSV functions into a single function
o used macros to centralize and clarify the buffering code
o updated comments
o renamed client_encoding_only to encoding_embeds_ascii
o added a high-bit test to the encoding_embeds_ascii test for
performance
o in CSV mode, allow a backslash followed by a non-period to
continue being processed as a data value
There should be no performance impact from this patch because it is
functionally equivalent. If you apply the patch you will see copy.c is
much clearer in this area now and might suggest additional
optimizations.
I have also attached a 8.1-only patch to fix the CSV \. handling bug
with no code restructuring.
See:
Subject: [HACKERS] bugs with certain Asian multibyte charsets
From: Tatsuo Ishii <ishii@sraoss.co.jp>
To: pgsql-hackers@postgresql.org
Date: Sat, 24 Dec 2005 18:25:33 +0900 (JST)
for more details.
Also make the code more robust by searching for target encoding
in the internal charset map.
Problem reported by Sagi Bashari on 2005/12/21.
See "[BUGS] BUG #2120: Crash when doing UTF8<->ISO_8859_8 encoding conversion"
on pgsql-bugs list for more details.
Back patch for 8.1_STABLE.
