This patch makes two closely related sets of changes:
1. For UPDATE, the subplan of the ModifyTable node now only delivers
the new values of the changed columns (i.e., the expressions computed
in the query's SET clause) plus row identity information such as CTID.
ModifyTable must re-fetch the original tuple to merge in the old
values of any unchanged columns. The core advantage of this is that
the changed columns are uniform across all tables of an inherited or
partitioned target relation, whereas the other columns might not be.
A secondary advantage, when the UPDATE involves joins, is that less
data needs to pass through the plan tree. The disadvantage of course
is an extra fetch of each tuple to be updated. However, that seems to
be very nearly free in context; even worst-case tests don't show it to
add more than a couple percent to the total query cost. At some point
it might be interesting to combine the re-fetch with the tuple access
that ModifyTable must do anyway to mark the old tuple dead; but that
would require a good deal of refactoring and it seems it wouldn't buy
all that much, so this patch doesn't attempt it.
2. For inherited UPDATE/DELETE, instead of generating a separate
subplan for each target relation, we now generate a single subplan
that is just exactly like a SELECT's plan, then stick ModifyTable
on top of that. To let ModifyTable know which target relation a
given incoming row refers to, a tableoid junk column is added to
the row identity information. This gets rid of the horrid hack
that was inheritance_planner(), eliminating O(N^2) planning cost
and memory consumption in cases where there were many unprunable
target relations.
Point 2 of course requires point 1, so that there is a uniform
definition of the non-junk columns to be returned by the subplan.
We can't insist on uniform definition of the row identity junk
columns however, if we want to keep the ability to have both
plain and foreign tables in a partitioning hierarchy. Since
it wouldn't scale very far to have every child table have its
own row identity column, this patch includes provisions to merge
similar row identity columns into one column of the subplan result.
In particular, we can merge the whole-row Vars typically used as
row identity by FDWs into one column by pretending they are type
RECORD. (It's still okay for the actual composite Datums to be
labeled with the table's rowtype OID, though.)
There is more that can be done to file down residual inefficiencies
in this patch, but it seems to be committable now.
FDW authors should note several API changes:
* The argument list for AddForeignUpdateTargets() has changed, and so
has the method it must use for adding junk columns to the query. Call
add_row_identity_var() instead of manipulating the parse tree directly.
You might want to reconsider exactly what you're adding, too.
* PlanDirectModify() must now work a little harder to find the
ForeignScan plan node; if the foreign table is part of a partitioning
hierarchy then the ForeignScan might not be the direct child of
ModifyTable. See postgres_fdw for sample code.
* To check whether a relation is a target relation, it's no
longer sufficient to compare its relid to root->parse->resultRelation.
Instead, check it against all_result_relids or leaf_result_relids,
as appropriate.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/CA+HiwqHpHdqdDn48yCEhynnniahH78rwcrv1rEX65-fsZGBOLQ@mail.gmail.com
This allows something like
SELECT ... FROM t1 JOIN t2 USING (a, b, c) AS x
where x has the columns a, b, c and unlike a regular alias it does not
hide the range variables of the tables being joined t1 and t2.
Per SQL:2016 feature F404 "Range variable for common column names".
Reviewed-by: Vik Fearing <vik.fearing@2ndquadrant.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/454638cf-d563-ab76-a585-2564428062af@2ndquadrant.com
This implements asynchronous execution, which runs multiple parts of a
non-parallel-aware Append concurrently rather than serially to improve
performance when possible. Currently, the only node type that can be
run concurrently is a ForeignScan that is an immediate child of such an
Append. In the case where such ForeignScans access data on different
remote servers, this would run those ForeignScans concurrently, and
overlap the remote operations to be performed simultaneously, so it'll
improve the performance especially when the operations involve
time-consuming ones such as remote join and remote aggregation.
We may extend this to other node types such as joins or aggregates over
ForeignScans in the future.
This also adds the support for postgres_fdw, which is enabled by the
table-level/server-level option "async_capable". The default is false.
Robert Haas, Kyotaro Horiguchi, Thomas Munro, and myself. This commit
is mostly based on the patch proposed by Robert Haas, but also uses
stuff from the patch proposed by Kyotaro Horiguchi and from the patch
proposed by Thomas Munro. Reviewed by Kyotaro Horiguchi, Konstantin
Knizhnik, Andrey Lepikhov, Movead Li, Thomas Munro, Justin Pryzby, and
others.
Discussion: https://postgr.es/m/CA%2BTgmoaXQEt4tZ03FtQhnzeDEMzBck%2BLrni0UWHVVgOTnA6C1w%40mail.gmail.com
Discussion: https://postgr.es/m/CA%2BhUKGLBRyu0rHrDCMC4%3DRn3252gogyp1SjOgG8SEKKZv%3DFwfQ%40mail.gmail.com
Discussion: https://postgr.es/m/20200228.170650.667613673625155850.horikyota.ntt%40gmail.com
ParseNamespaceItem had a wired-in assumption that p_rte->eref
describes the table and column aliases exposed by the nsitem. This
relaxes this by creating a separate p_names field in an nsitem. This
is mainly preparation for a patch for JOIN USING aliases, but it saves
one indirection in common code paths, so it's possibly a win on its
own.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/785329.1616455091@sss.pgh.pa.us
Here we add a new output parameter to estimate_num_groups() to allow it to
inform the caller of additional, possibly useful information about the
estimation.
The new output parameter is a struct that currently contains just a single
field with a set of flags. This was done rather than having the flags as
an output parameter to allow future fields to be added without having to
change the signature of the function at a later date when we want to pass
back further information that might not be suitable to store in the flags
field.
It seems reasonable that one day in the future that the planner would want
to know more about the estimation. For example, how many individual sets
of statistics was the estimation generated from? The planner may want to
take that into account if we ever want to consider risks as well as costs
when generating plans.
For now, there's only 1 flag we set in the flags field. This is to
indicate if the estimation fell back on using the hard-coded constants in
any part of the estimation. Callers may like to change their behavior if
this is set, and this gives them the ability to do so. Callers may pass
the flag pointer as NULL if they have no interest in obtaining any
additional information about the estimate.
We're not adding any actual usages of these flags here. Some follow-up
commits will make use of this feature. Additionally, we're also not
making any changes to add support for clauselist_selectivity() and
clauselist_selectivity_ext(). However, if this is required in the future
then the same struct being added here should be fine to use as a new
output argument for those functions too.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvqQqpk=1W-G_ds7A9CsXX3BggWj_7okinzkLVhDubQzjA@mail.gmail.com
Previously simplehash.h only exposed a method to perform a hash table
delete using the hash table key. This meant that the delete function had
to perform a hash lookup in order to find the entry to delete. Here we
add a new function so that users of simplehash.h can perform a hash delete
directly using the entry pointer, thus saving the hash lookup.
An upcoming patch that uses simplehash.h already has performed the hash
lookup so already has the entry pointer. This change will allow the
code in that patch to perform the hash delete without the code in
simplehash.h having to perform an additional hash lookup.
Author: David Rowley
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/CAApHDvqFLXXge153WmPsjke5VGOSt7Ez0yD0c7eBXLfmWxs3Kw@mail.gmail.com
Along with gid, this provides a different way to identify the transaction.
The users that use xid in some way to prepare the transactions can use it
to filter prepare transactions. The later commands COMMIT PREPARED or
ROLLBACK PREPARED carries both identifiers, providing an output plugin the
choice of what to use.
Author: Markus Wanner
Reviewed-by: Vignesh C, Amit Kapila
Discussion: https://postgr.es/m/ee280000-7355-c4dc-e47b-2436e7be959c@enterprisedb.com
The design of the data structures which allow storage of the per-worker
memory during parallel seq scans were not ideal. The work done in
56788d215 required an additional data structure to allow workers to
remember the range of pages that had been allocated to them for
processing during a parallel seqscan. That commit added a void pointer
field to TableScanDescData to allow heapam to store the per-worker
allocation information. However putting the field there made very little
sense given that we have AM specific structs for that, e.g.
HeapScanDescData.
Here we remove the void pointer field from TableScanDescData and add a
dedicated field for this purpose to HeapScanDescData.
Previously we also allocated memory for this parallel per-worker data for
all scans, regardless if it was a parallel scan or not. This was just a
wasted allocation for non-parallel scans, so here we make the allocation
conditional on the scan being parallel.
Also, add previously missing pfree() to free the per-worker data in
heap_endscan().
Reported-by: Andres Freund
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/20210317023101.anvejcfotwka6gaa@alap3.anarazel.de
Currently we only recognize the Common Name (CN) of a certificate's
subject to be matched against the user name. Thus certificates with
subjects '/OU=eng/CN=fred' and '/OU=sales/CN=fred' will have the same
connection rights. This patch provides an option to match the whole
Distinguished Name (DN) instead of just the CN. On any hba line using
client certificate identity, there is an option 'clientname' which can
have values of 'DN' or 'CN'. The default is 'CN', the current procedure.
The DN is matched against the RFC2253 formatted DN, which looks like
'CN=fred,OU=eng'.
This facility of probably best used in conjunction with an ident map.
Discussion: https://postgr.es/m/92e70110-9273-d93c-5913-0bccb6562740@dunslane.net
Reviewed-By: Michael Paquier, Daniel Gustafsson, Jacob Champion
Here we aim to reduce duplicate work done by contain_volatile_functions()
by caching whether PathTargets and RestrictInfos contain any volatile
functions the first time contain_volatile_functions() is called for them.
Any future calls for these nodes just use the cached value rather than
going to the trouble of recursively checking the sub-node all over again.
Thanks to Tom Lane for the idea.
Any locations in the code which make changes to a PathTarget or
RestrictInfo which could change the outcome of the volatility check must
change the cached value back to VOLATILITY_UNKNOWN again.
contain_volatile_functions() is the only code in charge of setting the
cache value to either VOLATILITY_VOLATILE or VOLATILITY_NOVOLATILE.
Some existing code does benefit from this additional caching, however,
this change is mainly aimed at an upcoming patch that must check for
volatility during the join search. Repeated volatility checks in that
case can become very expensive when the join search contains more than a
few relations.
Author: David Rowley
Discussion: https://postgr.es/m/3795226.1614059027@sss.pgh.pa.us
Allow defining extended statistics on expressions, not just just on
simple column references. With this commit, expressions are supported
by all existing extended statistics kinds, improving the same types of
estimates. A simple example may look like this:
CREATE TABLE t (a int);
CREATE STATISTICS s ON mod(a,10), mod(a,20) FROM t;
ANALYZE t;
The collected statistics are useful e.g. to estimate queries with those
expressions in WHERE or GROUP BY clauses:
SELECT * FROM t WHERE mod(a,10) = 0 AND mod(a,20) = 0;
SELECT 1 FROM t GROUP BY mod(a,10), mod(a,20);
This introduces new internal statistics kind 'e' (expressions) which is
built automatically when the statistics object definition includes any
expressions. This represents single-expression statistics, as if there
was an expression index (but without the index maintenance overhead).
The statistics is stored in pg_statistics_ext_data as an array of
composite types, which is possible thanks to 79f6a942bd.
CREATE STATISTICS allows building statistics on a single expression, in
which case in which case it's not possible to specify statistics kinds.
A new system view pg_stats_ext_exprs can be used to display expression
statistics, similarly to pg_stats and pg_stats_ext views.
ALTER TABLE ... ALTER COLUMN ... TYPE now treats indexes the same way it
treats indexes, i.e. it drops and recreates the statistics. This means
all statistics are reset, and we no longer try to preserve at least the
functional dependencies. This should not be a major issue in practice,
as the functional dependencies actually rely on per-column statistics,
which were always reset anyway.
Author: Tomas Vondra
Reviewed-by: Justin Pryzby, Dean Rasheed, Zhihong Yu
Discussion: https://postgr.es/m/ad7891d2-e90c-b446-9fe2-7419143847d7%40enterprisedb.com
Membership consists, implicitly, of the current database owner. Expect
use in template databases. Once pg_database_owner has rights within a
template, each owner of a database instantiated from that template will
exercise those rights.
Reviewed by John Naylor.
Discussion: https://postgr.es/m/20201228043148.GA1053024@rfd.leadboat.com
Adds BRIN opclasses similar to the existing minmax, except that instead
of summarizing the page range into a single [min,max] range, the summary
consists of multiple ranges and/or points, allowing gaps. This allows
more efficient handling of data with poor correlation to physical
location within the table and/or outlier values, for which the regular
minmax opclassed tend to work poorly.
It's possible to specify the number of values kept for each page range,
either as a single point or an interval boundary.
CREATE TABLE t (a int);
CREATE INDEX ON t
USING brin (a int4_minmax_multi_ops(values_per_range=16));
When building the summary, the values are combined into intervals with
the goal to minimize the "covering" (sum of interval lengths), using a
support procedure computing distance between two values.
Bump catversion, due to various catalog changes.
Author: Tomas Vondra <tomas.vondra@postgresql.org>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Sokolov Yura <y.sokolov@postgrespro.ru>
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://postgr.es/m/c1138ead-7668-f0e1-0638-c3be3237e812@2ndquadrant.com
Discussion: https://postgr.es/m/5d78b774-7e9c-c94e-12cf-fef51cc89b1a%402ndquadrant.com
Adds a BRIN opclass using a Bloom filter to summarize the range. Indexes
using the new opclasses allow only equality queries (similar to hash
indexes), but that works fine for data like UUID, MAC addresses etc. for
which range queries are not very common. This also means the indexes
work for data that is not well correlated to physical location within
the table, or perhaps even entirely random (which is a common issue with
existing BRIN minmax opclasses).
It's possible to specify opclass parameters with the usual Bloom filter
parameters, i.e. the desired false-positive rate and the expected number
of distinct values per page range.
CREATE TABLE t (a int);
CREATE INDEX ON t
USING brin (a int4_bloom_ops(false_positive_rate = 0.05,
n_distinct_per_range = 100));
The opclasses do not operate on the indexed values directly, but compute
a 32-bit hash first, and the Bloom filter is built on the hash value.
Collisions should not be a huge issue though, as the number of distinct
values in a page ranges is usually fairly small.
Bump catversion, due to various catalog changes.
Author: Tomas Vondra <tomas.vondra@postgresql.org>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Sokolov Yura <y.sokolov@postgrespro.ru>
Reviewed-by: Nico Williams <nico@cryptonector.com>
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://postgr.es/m/c1138ead-7668-f0e1-0638-c3be3237e812@2ndquadrant.com
Discussion: https://postgr.es/m/5d78b774-7e9c-c94e-12cf-fef51cc89b1a%402ndquadrant.com
Commit a1c649d889 changed the signature of the BRIN consistent function
by adding a new required parameter. Treating the parameter as optional,
which would make the change backwards incompatibile, was rejected with
the justification that there are few out-of-core extensions, so it's not
worth adding making the code more complex, and it's better to deal with
that in the extension.
But after further thought, that would be rather problematic, because
pg_upgrade simply dumps catalog contents and the same version of an
extension needs to work on both PostgreSQL versions. Supporting both
variants of the consistent function (with 3 or 4 arguments) makes that
possible.
The signature is not the only thing that changed, as commit 72ccf55cb9
moved handling of IS [NOT] NULL keys from the support procedures. But
this change is backward compatible - handling the keys in exension is
unnecessary, but harmless. The consistent function will do a bit of
unnecessary work, but it should be very cheap.
This also undoes most of the changes to the existing opclasses (minmax
and inclusion), making them use the old signature again. This should
make backpatching simpler.
Catversion bump, because of changes in pg_amproc.
Author: Tomas Vondra <tomas.vondra@postgresql.org>
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Reviewed-by: Mark Dilger <hornschnorter@gmail.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Masahiko Sawada <masahiko.sawada@enterprisedb.com>
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://postgr.es/m/c1138ead-7668-f0e1-0638-c3be3237e812@2ndquadrant.com
The BRIN minmax opclasses included amproc entries with mismatching left
and right types, but those happen to be unnecessary. The opclasses only
need cross-type operators, not cross-type support procedures. Discovered
when trying to define equivalent BRIN operator families in an extension.
Catversion bump, because of pg_amproc changes.
Author: Tomas Vondra
Reviewed-by: Alvaro Herrera
Discussion: https://postgr.es/m/78c357ab-3395-8433-e7b3-b2cfcc9fdc23%40enterprisedb.com
Allow a partition be detached from its partitioned table without
blocking concurrent queries, by running in two transactions and only
requiring ShareUpdateExclusive in the partitioned table.
Because it runs in two transactions, it cannot be used in a transaction
block. This is the main reason to use dedicated syntax: so that users
can choose to use the original mode if they need it. But also, it
doesn't work when a default partition exists (because an exclusive lock
would still need to be obtained on it, in order to change its partition
constraint.)
In case the second transaction is cancelled or a crash occurs, there's
ALTER TABLE .. DETACH PARTITION .. FINALIZE, which executes the final
steps.
The main trick to make this work is the addition of column
pg_inherits.inhdetachpending, initially false; can only be set true in
the first part of this command. Once that is committed, concurrent
transactions that use a PartitionDirectory will include or ignore
partitions so marked: in optimizer they are ignored if the row is marked
committed for the snapshot; in executor they are always included. As a
result, and because of the way PartitionDirectory caches partition
descriptors, queries that were planned before the detach will see the
rows in the detached partition and queries that are planned after the
detach, won't.
A CHECK constraint is created that duplicates the partition constraint.
This is probably not strictly necessary, and some users will prefer to
remove it afterwards, but if the partition is re-attached to a
partitioned table, the constraint needn't be rechecked.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20200803234854.GA24158@alvherre.pgsql
Previously when an archive recovery or a standby was starting and
reached the consistent recovery state but hot_standby was configured
to off, the error message when a client connectted was "the database
system is starting up", which was needless confusing and not really
all that accurate either.
This commit improves the connection denied error message during
recovery, as follows, so that the users immediately know that their
servers are configured to deny those connections.
- If hot_standby is disabled, the error message "the database system
is not accepting connections" and the detail message "Hot standby
mode is disabled." are output when clients connect while an archive
recovery or a standby is running.
- If hot_standby is enabled, the error message "the database system
is not yet accepting connections" and the detail message
"Consistent recovery state has not been yet reached." are output
when clients connect until the consistent recovery state is reached
and postmaster starts accepting read only connections.
This commit doesn't change the connection denied error message of
"the database system is starting up" during normal server startup and
crash recovery. Because it's still suitable for those situations.
Author: James Coleman
Reviewed-by: Alvaro Herrera, Andres Freund, David Zhang, Tom Lane, Fujii Masao
Discussion: https://postgr.es/m/CAAaqYe8h5ES_B=F_zDT+Nj9XU7YEwNhKhHA2RE4CFhAQ93hfig@mail.gmail.com
Change the default_toast_compression GUC to be an enum rather than
a string. Earlier, uncommitted versions of the patch supported using
CREATE ACCESS METHOD to add new compression methods to a running
system, but that idea was dropped before commit. So, we can simplify
the GUC handling as well, which has the nice side effect of improving
the error messages.
While updating the documentation to reflect the new GUC type, also
move it back to the right place in the list. I moved this while
revising what became commit 24f0e395ac,
but apparently the intended ordering is "alphabetical" rather than
"whatever Robert thinks looks nice."
Rejigger things to avoid having access/toast_compression.h depend on
utils/guc.h, so that we don't end up with every file that includes
it also depending on something largely unrelated. Move a few
inline functions back into the C source file partly to help reduce
dependencies and partly just to avoid clutter. A few very minor
cosmetic fixes.
Original patch by Justin Pryzby, but very heavily edited by me,
and reverse reviewed by him and also reviewed by by Tom Lane.
Discussion: http://postgr.es/m/CA+TgmoYp=GT_ztUCeZg2i4hkHAQv8o=-nVJ1-TKWTG1zQOmOpg@mail.gmail.com
Similar to date_trunc, but allows binning by an arbitrary interval
rather than just full units.
Author: John Naylor <john.naylor@enterprisedb.com>
Reviewed-by: David Fetter <david@fetter.org>
Reviewed-by: Isaac Morland <isaac.morland@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Artur Zakirov <zaartur@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CACPNZCt4buQFRgy6DyjuZS-2aPDpccRkrJBmgUfwYc1KiaXYxg@mail.gmail.com
To allow inserts in parallel-mode this feature has to ensure that all the
constraints, triggers, etc. are parallel-safe for the partition hierarchy
which is costly and we need to find a better way to do that. Additionally,
we could have used existing cached information in some cases like indexes,
domains, etc. to determine the parallel-safety.
List of commits reverted, in reverse chronological order:
ed62d3737c Doc: Update description for parallel insert reloption.
c8f78b6161 Add a new GUC and a reloption to enable inserts in parallel-mode.
c5be48f092 Improve FK trigger parallel-safety check added by 05c8482f7f.
e2cda3c20a Fix use of relcache TriggerDesc field introduced by commit 05c8482f7f.
e4e87a32cc Fix valgrind issue in commit 05c8482f7f.
05c8482f7f Enable parallel SELECT for "INSERT INTO ... SELECT ...".
Discussion: https://postgr.es/m/E1lMiB9-0001c3-SY@gemulon.postgresql.org
Commit de829ddf23 added wait event WalrcvExit. But its name is not
consistent with other wait events like WalReceiverMain or
WalReceiverWaitStart, etc. So this commit renames WalrcvExit to
WalReceiverExit.
Author: Fujii Masao
Reviewed-by: Thomas Munro
Discussion: https://postgr.es/m/cced9995-8fa2-7b22-9d91-3f22a2b8c23c@oss.nttdata.com
This function for bit and bytea counts the set bits in the bit or byte
string. Internally, we use the existing popcount functionality.
For the name, after some discussion, we settled on bit_count, which
also exists with this meaning in MySQL, Java, and Python.
Author: David Fetter <david@fetter.org>
Discussion: https://www.postgresql.org/message-id/flat/20201230105535.GJ13234@fetter.org
A couple error messages and comments used 'statistic kind', not the
correct 'statistics kind'. Fix and backpatch all the way back to 10,
where extended statistics were introduced.
Backpatch-through: 10
Previously the type of this wait event was Client. But while this
wait event is being reported, walreceiver process is waiting for
the startup process to set initial data for streaming replication.
It's not waiting for any activity on a socket connected to a user
application or walsender. So this commit changes the type for
WalReceiverWaitStart wait event to IPC.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/cdacc27c-37ff-f1a4-20e2-ce19933abfcc@oss.nttdata.com
Previously, to check relation permanence, the Relation's Form_pg_class
structure member relpersistence was compared to the value
RELPERSISTENCE_PERMANENT ("p"). This commit adds the macro
RelationIsPermanent() and is used in appropirate places to simplify the
code. This matches other RelationIs* macros.
This macro will be used in more places in future cluster file encryption
patches.
Discussion: https://postgr.es/m/20210318153134.GH20766@tamriel.snowman.net
The handling of IS [NOT] NULL clauses is independent of an opclass, and
most of the code was exactly the same in both minmax and inclusion. So
instead move the code from support procedures to the AM.
This simplifies the code - especially the support procedures - quite a
bit, as they don't need to care about NULL values and flags at all. It
also means the IS [NOT] NULL clauses can be evaluated without invoking
the support procedure.
Author: Tomas Vondra <tomas.vondra@postgresql.org>
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Reviewed-by: Nikita Glukhov <n.gluhov@postgrespro.ru>
Reviewed-by: Mark Dilger <hornschnorter@gmail.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Masahiko Sawada <masahiko.sawada@enterprisedb.com>
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://postgr.es/m/c1138ead-7668-f0e1-0638-c3be3237e812@2ndquadrant.com
This commit changes how we pass scan keys to BRIN consistent function.
Instead of passing them one by one, we now pass all scan keys for a
given attribute at once. That makes the consistent function a bit more
complex, as it has to loop through the keys, but it does allow more
elaborate opclasses that can use multiple keys to eliminate ranges much
more effectively.
The existing BRIN opclasses (minmax, inclusion) don't really benefit
from this change. The primary purpose is to allow future opclases to
benefit from seeing all keys at once.
This does change the BRIN API, because the signature of the consistent
function changes (a new parameter with number of scan keys). So this
breaks existing opclasses, and will require supporting two variants of
the code for different PostgreSQL versions. We've considered supporting
two variants of the consistent, but we've decided not to do that.
Firstly, there's another patch that moves handling of NULL values from
the opclass, which means the opclasses need to be updated anyway.
Secondly, we're not aware of any out-of-core BRIN opclasses, so it does
not seem worth the extra complexity.
Bump catversion, because of pg_proc changes.
Author: Tomas Vondra <tomas.vondra@postgresql.org>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Mark Dilger <hornschnorter@gmail.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Reviewed-by: Nikita Glukhov <n.gluhov@postgrespro.ru>
Discussion: https://postgr.es/m/c1138ead-7668-f0e1-0638-c3be3237e812@2ndquadrant.com
Until now the bsearch_arg function was used only in extended statistics
code, so it was defined in that code. But we already have qsort_arg in
src/port, so let's move it next to it.
substring(), and perhaps other callers, isn't careful to pass a
slice length that is no more than the datum's true size. Since
toast_decompress_datum_slice's children will palloc the requested
slice length, this can waste memory. Also, close study of the liblz4
documentation suggests that it is dependent on the caller to not ask
for more than the correct amount of decompressed data; this squares
with observed misbehavior with liblz4 1.8.3. Avoid these problems
by switching to the normal full-decompression code path if the
slice request is >= datum's decompressed size.
Tom Lane and Dilip Kumar
Discussion: https://postgr.es/m/507597.1616370729@sss.pgh.pa.us
The authors of bbe0a81db hadn't quite got the idea that macros named
like SOMETHING_4B_C were only meant for internal endianness-related
details in postgres.h. Choose more legible names for macros that are
intended to be used elsewhere. Rearrange postgres.h a bit to clarify
the separation between those internal macros and ones intended for
wider use.
Also, avoid using the term "rawsize" for true decompressed size;
we've used "extsize" for that, because "rawsize" generally denotes
total Datum size including header. This choice seemed particularly
unfortunate in tests that were comparing one of these meanings to
the other.
This patch includes a couple of not-purely-cosmetic changes: be
sure that the shifts aligning compression methods are unsigned
(not critical today, but will be when compression method 2 exists),
and fix broken definition of VARATT_EXTERNAL_GET_COMPRESSION (now
VARATT_EXTERNAL_GET_COMPRESS_METHOD), whose callers worked only
accidentally.
Discussion: https://postgr.es/m/574197.1616428079@sss.pgh.pa.us
This seems to have been just copied-and-pasted from some other
header checks. But our C code is entirely unprepared to support
such a header name, so it's only wasting cycles to look for it.
If we did need to support it, some #ifdefs would be required.
(A quick trawl at codesearch.debian.net finds some packages that
reference lz4/lz4.h; but they use *only* that spelling, and
appear to be intending to reference their own copy rather than
a system-level installation of liblz4. There's no evidence of
freestanding installations that require this spelling.)
Discussion: https://postgr.es/m/457962.1616362509@sss.pgh.pa.us
This commit is mostly a revert of aaa3aed, that switched the routine
doing the internal renaming of recycled WAL segments to use on Windows a
combination of CreateHardLinkA() plus unlink() instead of rename(). As
reported by several users of Postgres 13, this is causing concurrency
issues when manipulating WAL segments, mostly in the shape of the
following error:
LOG: could not rename file "pg_wal/000000XX000000YY000000ZZ":
Permission denied
This moves back to a logic where a single rename() (well, pgrename() for
Windows) is used. This issue has proved to be hard to hit when I tested
it, facing it only once with an archive_command that was not able to do
its work, so it is environment-sensitive. The reporters of this issue
have been able to confirm that the situation improved once we switched
back to a single rename(). In order to check things, I have provided to
the reporters a patched build based on 13.2 with aaa3aed reverted, to
test if the error goes away, and an unpatched build of 13.2 to test if
the error still showed up (just to make sure that I did not mess up my
build process).
Extra thanks to Fujii Masao for pointing out what looked like the
culprit commit, and to all the reporters for taking the time to test
what I have sent them.
Reported-by: Andrus, Guy Burgess, Yaroslav Pashinsky, Thomas Trenz
Reviewed-by: Tom Lane, Andres Freund
Discussion: https://postgr.es/m/3861ff1e-0923-7838-e826-094cc9bef737@hot.ee
Discussion: https://postgr.es/m/16874-c3eecd319e36a2bf@postgresql.org
Discussion: https://postgr.es/m/095ccf8d-7f58-d928-427c-b17ace23cae6@burgess.co.nz
Discussion: https://postgr.es/m/16927-67c570d968c99567%40postgresql.org
Discussion: https://postgr.es/m/YFBcRbnBiPdGZvfW@paquier.xyz
Backpatch-through: 13
Maintain a simple array of metadata about pages that were deleted during
nbtree VACUUM's current btvacuumscan() call. Use this metadata at the
end of btvacuumscan() to attempt to place newly deleted pages in the FSM
without further delay. It might not yet be safe to place any of the
pages in the FSM by then (they may not be deemed recyclable), but we
have little to lose and plenty to gain by trying. In practice there is
a very good chance that this will work out when vacuuming larger
indexes, where scanning the index naturally takes quite a while.
This commit doesn't change the page recycling invariants; it merely
improves the efficiency of page recycling within the confines of the
existing design. Recycle safety is a part of nbtree's implementation of
what Lanin & Shasha call "the drain technique". The design happens to
use transaction IDs (they're stored in deleted pages), but that in
itself doesn't align the cutoff for recycle safety to any of the
XID-based cutoffs used by VACUUM (e.g., OldestXmin). All that matters
is whether or not _other_ backends might be able to observe various
inconsistencies in the tree structure (that they cannot just detect and
recover from by moving right). Recycle safety is purely a question of
maintaining the consistency (or the apparent consistency) of a physical
data structure.
Note that running a simple serial test case involving a large range
DELETE followed by a VACUUM VERBOSE will probably show that any newly
deleted nbtree pages are not yet reusable/recyclable. This is expected
in the absence of even one concurrent XID assignment. It is an old
implementation restriction. In practice it's unlikely to be the thing
that makes recycling remain unsafe, at least with larger indexes, where
recycling newly deleted pages during the same VACUUM actually matters.
An important high-level goal of this commit (as well as related recent
commits e5d8a999 and 9f3665fb) is to make expensive deferred cleanup
operations in index AMs rare in general. If index vacuuming frequently
depends on the next VACUUM operation finishing off work that the current
operation started, then the general behavior of index vacuuming is hard
to predict. This is relevant to ongoing work that adds a vacuumlazy.c
mechanism to skip index vacuuming in certain cases. Anything that makes
the real world behavior of index vacuuming simpler and more linear will
also make top-down modeling in vacuumlazy.c more robust.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wzk76_P=67iUscb1UN44-gyZL-KgpsXbSxq_bdcMa7Q+wQ@mail.gmail.com
It's not okay to just shove the pkg_config results right into our
build flags, for a couple different reasons:
* This fails to maintain the separation between CPPFLAGS and CFLAGS,
as well as that between LDFLAGS and LIBS. (The CPPFLAGS angle is,
I believe, the reason for warning messages reported when building
with MacPorts' liblz4.)
* If pkg_config emits anything other than -I/-D/-L/-l switches,
it's highly unlikely that we want to absorb those. That'd be more
likely to break the build than do anything helpful. (Even the -D
case is questionable; but we're doing that for libxml2, so I kept it.)
Also, it's not okay to skip doing an AC_CHECK_LIB probe, as
evidenced by recent build failure on topminnow; that should
have been caught at configure time.
Model fixes for this on configure's libxml2 support.
It appears that somebody overlooked an autoheader run, too.
Discussion: https://postgr.es/m/20210119190720.GL8560@telsasoft.com
Compilers that don't understand that elog(ERROR) doesn't return
issued warnings here. In the cases in libpq_pipeline.c, we were
not exactly helping things by failing to mark pg_fatal() as noreturn.
Per buildfarm.
Since commit 2ce439f3 we have opened every file in the data directory
and called fsync() at the start of crash recovery. This can be very
slow if there are many files, leading to field complaints of systems
taking minutes or even hours to begin crash recovery.
Provide an alternative method, for Linux only, where we call syncfs() on
every possibly different filesystem under the data directory. This is
equivalent, but avoids faulting in potentially many inodes from
potentially slow storage.
The new mode comes with some caveats, described in the documentation, so
the default value for the new setting is "fsync", preserving the older
behavior.
Reported-by: Michael Brown <michael.brown@discourse.org>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Paul Guo <guopa@vmware.com>
Reviewed-by: Bruce Momjian <bruce@momjian.us>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: David Steele <david@pgmasters.net>
Discussion: https://postgr.es/m/11bc2bb7-ecb5-3ad0-b39f-df632734cd81%40discourse.org
Discussion: https://postgr.es/m/CAEET0ZHGnbXmi8yF3ywsDZvb3m9CbdsGZgfTXscQ6agcbzcZAw%40mail.gmail.com
There is now a per-column COMPRESSION option which can be set to pglz
(the default, and the only option in up until now) or lz4. Or, if you
like, you can set the new default_toast_compression GUC to lz4, and
then that will be the default for new table columns for which no value
is specified. We don't have lz4 support in the PostgreSQL code, so
to use lz4 compression, PostgreSQL must be built --with-lz4.
In general, TOAST compression means compression of individual column
values, not the whole tuple, and those values can either be compressed
inline within the tuple or compressed and then stored externally in
the TOAST table, so those properties also apply to this feature.
Prior to this commit, a TOAST pointer has two unused bits as part of
the va_extsize field, and a compessed datum has two unused bits as
part of the va_rawsize field. These bits are unused because the length
of a varlena is limited to 1GB; we now use them to indicate the
compression type that was used. This means we only have bit space for
2 more built-in compresison types, but we could work around that
problem, if necessary, by introducing a new vartag_external value for
any further types we end up wanting to add. Hopefully, it won't be
too important to offer a wide selection of algorithms here, since
each one we add not only takes more coding but also adds a build
dependency for every packager. Nevertheless, it seems worth doing
at least this much, because LZ4 gets better compression than PGLZ
with less CPU usage.
It's possible for LZ4-compressed datums to leak into composite type
values stored on disk, just as it is for PGLZ. It's also possible for
LZ4-compressed attributes to be copied into a different table via SQL
commands such as CREATE TABLE AS or INSERT .. SELECT. It would be
expensive to force such values to be decompressed, so PostgreSQL has
never done so. For the same reasons, we also don't force recompression
of already-compressed values even if the target table prefers a
different compression method than was used for the source data. These
architectural decisions are perhaps arguable but revisiting them is
well beyond the scope of what seemed possible to do as part of this
project. However, it's relatively cheap to recompress as part of
VACUUM FULL or CLUSTER, so this commit adjusts those commands to do
so, if the configured compression method of the table happens not to
match what was used for some column value stored therein.
Dilip Kumar. The original patches on which this work was based were
written by Ildus Kurbangaliev, and those were patches were based on
even earlier work by Nikita Glukhov, but the design has since changed
very substantially, since allow a potentially large number of
compression methods that could be added and dropped on a running
system proved too problematic given some of the architectural issues
mentioned above; the choice of which specific compression method to
add first is now different; and a lot of the code has been heavily
refactored. More recently, Justin Przyby helped quite a bit with
testing and reviewing and this version also includes some code
contributions from him. Other design input and review from Tomas
Vondra, Álvaro Herrera, Andres Freund, Oleg Bartunov, Alexander
Korotkov, and me.
Discussion: http://postgr.es/m/20170907194236.4cefce96%40wp.localdomain
Discussion: http://postgr.es/m/CAFiTN-uUpX3ck%3DK0mLEk-G_kUQY%3DSNOTeqdaNRR9FMdQrHKebw%40mail.gmail.com
The text search cache mechanisms assume that we can clean up
an invalidated dictionary cache entry simply by resetting the
associated long-lived memory context. However, that does not work
for ispell affixes that make use of regular expressions, because
the regex library deals in plain old malloc. Hence, we leaked
compiled regex(es) any time we dropped such a cache entry. That
could quickly add up, since even a fairly trivial regex can use up
tens of kB, and a large one can eat megabytes. Add a memory context
callback to ensure that a regex gets freed when its owning cache
entry is cleared.
Found via valgrind testing.
This problem is ancient, so back-patch to all supported branches.
Discussion: https://postgr.es/m/3816764.1616104288@sss.pgh.pa.us
With grouping sets, it's possible that some of the grouping sets are
duplicate. This is especially common with CUBE and ROLLUP clauses. For
example GROUP BY CUBE (a,b), CUBE (b,c) is equivalent to
GROUP BY GROUPING SETS (
(a, b, c),
(a, b, c),
(a, b, c),
(a, b),
(a, b),
(a, b),
(a),
(a),
(a),
(c, a),
(c, a),
(c, a),
(c),
(b, c),
(b),
()
)
Some of the grouping sets are calculated multiple times, which is mostly
unnecessary. This commit implements a new GROUP BY DISTINCT feature, as
defined in the SQL standard, which eliminates the duplicate sets.
Author: Vik Fearing
Reviewed-by: Erik Rijkers, Georgios Kokolatos, Tomas Vondra
Discussion: https://postgr.es/m/bf3805a8-d7d1-ae61-fece-761b7ff41ecc@postgresfriends.org
After a crash of a backend using temporary files, the files used to be
left behind, on the basis that it might be useful for debugging. But we
don't have any reports of anyone actually doing that, and it means the
disk usage may grow over time due to repeated backend failures (possibly
even hitting ENOSPC). So this behavior is a bit unfortunate, and fixing
it required either manual cleanup (deleting files, which is error-prone)
or restart of the instance (i.e. service disruption).
This implements automatic cleanup of temporary files, controled by a new
GUC remove_temp_files_after_crash. By default the files are removed, but
it can be disabled to restore the old behavior if needed.
Author: Euler Taveira
Reviewed-by: Tomas Vondra, Michael Paquier, Anastasia Lubennikova, Thomas Munro
Discussion: https://postgr.es/m/CAH503wDKdYzyq7U-QJqGn%3DGm6XmoK%2B6_6xTJ-Yn5WSvoHLY1Ww%40mail.gmail.com
Commit 05c8482f7f added the implementation of parallel SELECT for
"INSERT INTO ... SELECT ..." which may incur non-negligible overhead in
the additional parallel-safety checks that it performs, even when, in the
end, those checks determine that parallelism can't be used. This is
normally only ever a problem in the case of when the target table has a
large number of partitions.
A new GUC option "enable_parallel_insert" is added, to allow insert in
parallel-mode. The default is on.
In addition to the GUC option, the user may want a mechanism to allow
inserts in parallel-mode with finer granularity at table level. The new
table option "parallel_insert_enabled" allows this. The default is true.
Author: "Hou, Zhijie"
Reviewed-by: Greg Nancarrow, Amit Langote, Takayuki Tsunakawa, Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1K-cW7svLC2D7DHoGHxdAdg3P37BLgebqBOC2ZLc9a6QQ%40mail.gmail.com
Discussion: https://postgr.es/m/CAJcOf-cXnB5cnMKqWEp2E2z7Mvcd04iLVmV=qpFJrR3AcrTS3g@mail.gmail.com
While looking at Robert Foggia's report, I noticed a passel of
other issues in the same area:
* The scheme for backslash-quoting newlines in pathnames is just
wrong; it will misbehave if the last ordinary character in a pathname
is a backslash. I'm not sure why we're bothering to allow newlines
in tablespace paths, but if we're going to do it we should do it
without introducing other problems. Hence, backslashes themselves
have to be backslashed too.
* The author hadn't read the sscanf man page very carefully, because
this code would drop any leading whitespace from the path. (I doubt
that a tablespace path with leading whitespace could happen in
practice; but if we're bothering to allow newlines in the path, it
sure seems like leading whitespace is little less implausible.) Using
sscanf for the task of finding the first space is overkill anyway.
* While I'm not 100% sure what the rationale for escaping both \r and
\n is, if the idea is to allow Windows newlines in the file then this
code failed, because it'd throw an error if it saw \r followed by \n.
* There's no cross-check for an incomplete final line in the map file,
which would be a likely apparent symptom of the improper-escaping
bug.
On the generation end, aside from the escaping issue we have:
* If needtblspcmapfile is true then do_pg_start_backup will pass back
escaped strings in tablespaceinfo->path values, which no caller wants
or is prepared to deal with. I'm not sure if there's a live bug from
that, but it looks like there might be (given the dubious assumption
that anyone actually has newlines in their tablespace paths).
* It's not being very paranoid about the possibility of random stuff
in the pg_tblspc directory. IMO we should ignore anything without an
OID-like name.
The escaping rule change doesn't seem back-patchable: it'll require
doubling of backslashes in the tablespace_map file, which is basically
a basebackup format change. The odds of that causing trouble are
considerably more than the odds of the existing bug causing trouble.
The rest of this seems somewhat unlikely to cause problems too,
so no back-patch.
Commit 3048898e dropped -ING from some wait event names that correspond
to barrier phases. Update the phases' names to match.
While we're here making cosmetic changes, also rename "DONE" to "FREE".
That pairs better with "ALLOCATE", and describes the activity that
actually happens in that phase (as we do for the other phases) rather
than describing a state. The distinction is clearer after bugfix commit
3b8981b6 split the phase into two. As for the growth barriers, rename
their "ALLOCATE" phase to "REALLOCATE", which is probably a better
description of what happens then. Also improve the comments about
the phases a bit.
Discussion: https://postgr.es/m/CA%2BhUKG%2BMDpwF2Eo2LAvzd%3DpOh81wUTsrwU1uAwR-v6OGBB6%2B7g%40mail.gmail.com
With very unlucky timing and parallel_leader_participation off, PHJ
could attempt to access per-batch state just as it was being freed.
There was code intended to prevent that by checking for a cleared
pointer, but it was buggy.
Fix, by introducing an extra barrier phase. The new phase
PHJ_BUILD_RUNNING means that it's safe to access the per-batch state to
find a batch to help with, and PHJ_BUILD_DONE means that it is too late.
The last to detach will free the array of per-batch state as before, but
now it will also atomically advance the phase at the same time, so that
late attachers can avoid the hazard, without the data race. This
mirrors the way per-batch hash tables are freed (see phases
PHJ_BATCH_PROBING and PHJ_BATCH_DONE).
Revealed by a one-off build farm failure, where BarrierAttach() failed a
sanity check assertion, because the memory had been clobbered by
dsa_free().
Back-patch to 11, where the code arrived.
Reported-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20200929061142.GA29096%40paquier.xyz
It's hard to avoid the conclusion that there is something wrong with
setjmp/longjmp on MinGW-64, as we have seen failures come and go after
entirely-unrelated-looking changes in our own code. Other projects
such as Ruby have given up and started using gcc's setjmp/longjmp
builtins on that platform; this patch just follows that lead.
Note that this is a pretty fundamental ABI break for functions
containining either setjmp or longjmp, so we can't really consider
a back-patch.
Per reports from Regina Obe and Heath Lord, as well as recent failures
on buildfarm member walleye, and less-recent failures on fairywren.
Juan José Santamaría Flecha
Discussion: https://postgr.es/m/000401d716a0$1ed0fc70$5c72f550$@pcorp.us
Discussion: https://postgr.es/m/CA+BEBhvHhM-Bn628pf-LsjqRh3Ang7qCSBG0Ga+7KwhGqrNUPw@mail.gmail.com
Discussion: https://postgr.es/m/f1caef93-9640-022e-9211-bbe8755a56b0@2ndQuadrant.com
This commit changes WAL archiver process so that it's treated as
an auxiliary process and can use shared memory. This is an infrastructure
patch required for upcoming shared-memory based stats collector patch
series. These patch series basically need any processes including archiver
that can report the statistics to access to shared memory. Since this patch
itself is useful to simplify the code and when users monitor the status of
archiver, it's committed separately in advance.
This commit simplifies the code for WAL archiving. For example, previously
backends need to signal to archiver via postmaster when they notify
archiver that there are some WAL files to archive. On the other hand,
this commit removes that signal to postmaster and enables backends to
notify archier directly using shared latch.
Also, as the side of this change, the information about archiver process
becomes viewable at pg_stat_activity view.
Author: Kyotaro Horiguchi
Reviewed-by: Andres Freund, Álvaro Herrera, Julien Rouhaud, Tomas Vondra, Arthur Zakirov, Fujii Masao
Discussion: https://postgr.es/m/20180629.173418.190173462.horiguchi.kyotaro@lab.ntt.co.jp
Commit 05c8482f7f added special logic related to parallel-safety of FK
triggers. This is a bit of a hack and should have instead been done by
simply setting appropriate proparallel values on those trigger functions
themselves.
Suggested-by: Tom Lane
Author: Greg Nancarrow
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/2309260.1615485644@sss.pgh.pa.us
Simplify _bt_vacuum_needs_cleanup() functions's signature (it only needs
a single 'rel' argument now), and move it next to its sibling function
in nbtpage.c.
I believe that _bt_vacuum_needs_cleanup() was originally located in
nbtree.c due to an include dependency issue. That's no longer an issue.
Follow-up to commit 9f3665fb.
Commit 9f3665fb removed the vacuum_cleanup_index_scale_factor storage
parameter. However, that creates dump/reload hazards when moving across
major versions.
Add back the vacuum_cleanup_index_scale_factor parameter (though not the
GUC of the same name) purely to avoid problems when using tools like
pg_upgrade. The parameter remains disabled and undocumented.
No backpatch to Postgres 13, since vacuum_cleanup_index_scale_factor was
only disabled by REL_13_STABLE's version of master branch commit
9f3665fb in the first place -- the parameter already looks like this on
REL_13_STABLE.
Discussion: https://postgr.es/m/YEm/a3Ko3nKnBuVq@paquier.xyz
Previously, the code and documentation seem to have essentially
assumed than a call to pg_wal_replay_pause() would take place
immediately, but that's not the case, because we only check for a
pause in certain places. This means that a tool that uses this
function and then wants to do something else afterward that is
dependent on the pause having taken effect doesn't know how long it
needs to wait to be sure that no more WAL is going to be replayed.
To avoid that, add a new function pg_get_wal_replay_pause_state()
which returns either 'not paused', 'paused requested', or 'paused'.
After calling pg_wal_replay_pause() the status will immediate change
from 'not paused' to 'pause requested'; when the startup process
has noticed this, the status will change to 'pause'. For backward
compatibility, pg_is_wal_replay_paused() still exists and returns
the same thing as before: true if a pause has been requested,
whether or not it has taken effect yet; and false if not.
The documentation is updated to clarify.
To improve the changes that a pause request is quickly confirmed
effective, adjust things so that WaitForWALToBecomeAvailable will
swiftly reach a call to recoveryPausesHere() when a pause request
is made.
Dilip Kumar, reviewed by Simon Riggs, Kyotaro Horiguchi, Yugo Nagata,
Masahiko Sawada, and Bharath Rupireddy.
Discussion: http://postgr.es/m/CAFiTN-vcLLWEm8Zr%3DYK83rgYrT9pbC8VJCfa1kY9vL3AUPfu6g%40mail.gmail.com
Create a wrapper object, ParallelSlotArray, to encapsulate the
number of slots and the slot array itself, plus some other relevant
bits of information. This reduces the number of parameters we have
to pass around all over the place.
Allow for a ParallelSlotArray to contain slots connected to
different databases within a single cluster. The current clients
of this mechanism don't need this, but it is expected to be used
by future patches.
Defer connecting to databases until we actually need the connection
for something. This is a slight behavior change for vacuumdb and
reindexdb. If you specify a number of jobs that is larger than the
number of objects, the extra connections will now not be used.
But, on the other hand, if you specify a number of jobs that is
so large that it's going to fail, the failure would previously have
happened before any operations were actually started, and now it
won't.
Mark Dilger, reviewed by me.
Discussion: http://postgr.es/m/12ED3DA8-25F0-4B68-937D-D907CFBF08E7@enterprisedb.com
Discussion: http://postgr.es/m/BA592F2D-F928-46FF-9516-2B827F067F57@enterprisedb.com
Remove the entire idea of "stale stats" within nbtree VACUUM (stop
caring about stats involving the number of inserted tuples). Also
remove the vacuum_cleanup_index_scale_factor GUC/param on the master
branch (though just disable them on postgres 13).
The vacuum_cleanup_index_scale_factor/stats interface made the nbtree AM
partially responsible for deciding when pg_class.reltuples stats needed
to be updated. This seems contrary to the spirit of the index AM API,
though -- it is not actually necessary for an index AM's bulk delete and
cleanup callbacks to provide accurate stats when it happens to be
inconvenient. The core code owns that. (Index AMs have the authority
to perform or not perform certain kinds of deferred cleanup based on
their own considerations, such as page deletion and recycling, but that
has little to do with pg_class.reltuples/num_index_tuples.)
This issue was fairly harmless until the introduction of the
autovacuum_vacuum_insert_threshold feature by commit b07642db, which had
an undesirable interaction with the vacuum_cleanup_index_scale_factor
mechanism: it made insert-driven autovacuums perform full index scans,
even though there is no real benefit to doing so. This has been tied to
a regression with an append-only insert benchmark [1].
Also have remaining cases that perform a full scan of an index during a
cleanup-only nbtree VACUUM indicate that the final tuple count is only
an estimate. This prevents vacuumlazy.c from setting the index's
pg_class.reltuples in those cases (it will now only update pg_class when
vacuumlazy.c had TIDs for nbtree to bulk delete). This arguably fixes
an oversight in deduplication-related bugfix commit 48e12913.
[1] https://smalldatum.blogspot.com/2021/01/insert-benchmark-postgres-is-still.html
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoA4WHthN5uU6+WScZ7+J_RcEjmcuH94qcoUPuB42ShXzg@mail.gmail.com
Backpatch: 13-, where autovacuum_vacuum_insert_threshold was added.
1. Backends waiting for buffer I/O are now interruptible.
2. If something goes wrong in a backend that is currently performing
I/O, waiting backends no longer wake up until that backend reaches
AbortBufferIO() and broadcasts on the CV. Previously, any waiters would
wake up (because the I/O lock was automatically released) and then
busy-loop until AbortBufferIO() cleared BM_IO_IN_PROGRESS.
3. LWLockMinimallyPadded is removed, as it would now be unused.
Author: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (earlier version, 2016)
Discussion: https://postgr.es/m/CA%2BhUKGJ8nBFrjLuCTuqKN0pd2PQOwj9b_jnsiGFFMDvUxahj_A%40mail.gmail.com
Discussion: https://postgr.es/m/CA+Tgmoaj2aPti0yho7FeEf2qt-JgQPRWb0gci_o1Hfr=C56Xng@mail.gmail.com
Commit 547f04e7 produced errors on AIX/xlc while building plpython. The
new code appears to be incompatible with the hack installed by commit
a11cf433. Without access to an AIX system to check, my guess is that
_POSIX_C_SOURCE may be required for <time.h> to declare the things the
header needs to see, but plpython.h undefines it.
For now, to unbreak build farm animal hoverfly, just move the new
pg_time_usec_t support into pgbench.c. Perhaps later we could figure
out what to rearrange to put it back into a header for wider use.
Discussion: https://postgr.es/m/CA%2BhUKG%2BP%2BjcD%3Dx9%2BagyTdWtjpOT64MYiGic%2Bcbu_TD8CV%3D6A3w%40mail.gmail.com
Instead of instr_time (struct timespec) and the INSTR_XXX macros,
introduce pg_time_usec_t and use integer arithmetic. Don't include the
connection time in TPS unless using -C mode, but report it separately.
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Discussion: https://postgr.es/m/20200227180100.zyvjwzcpiokfsqm2%40alap3.anarazel.de
Parallel SELECT can't be utilized for INSERT in the following cases:
- INSERT statement uses the ON CONFLICT DO UPDATE clause
- Target table has a parallel-unsafe: trigger, index expression or
predicate, column default expression or check constraint
- Target table has a parallel-unsafe domain constraint on any column
- Target table is a partitioned table with a parallel-unsafe partition key
expression or support function
The planner is updated to perform additional parallel-safety checks for
the cases listed above, for determining whether it is safe to run INSERT
in parallel-mode with an underlying parallel SELECT. The planner will
consider using parallel SELECT for "INSERT INTO ... SELECT ...", provided
nothing unsafe is found from the additional parallel-safety checks, or
from the existing parallel-safety checks for SELECT.
While checking parallel-safety, we need to check it for all the partitions
on the table which can be costly especially when we decide not to use a
parallel plan. So, in a separate patch, we will introduce a GUC and or a
reloption to enable/disable parallelism for Insert statements.
Prior to entering parallel-mode for the execution of INSERT with parallel
SELECT, a TransactionId is acquired and assigned to the current
transaction state. This is necessary to prevent the INSERT from attempting
to assign the TransactionId whilst in parallel-mode, which is not allowed.
This approach has a disadvantage in that if the underlying SELECT does not
return any rows, then the TransactionId is not used, however that
shouldn't happen in practice in many cases.
Author: Greg Nancarrow, Amit Langote, Amit Kapila
Reviewed-by: Amit Langote, Hou Zhijie, Takayuki Tsunakawa, Antonin Houska, Bharath Rupireddy, Dilip Kumar, Vignesh C, Zhihong Yu, Amit Kapila
Tested-by: Tang, Haiying
Discussion: https://postgr.es/m/CAJcOf-cXnB5cnMKqWEp2E2z7Mvcd04iLVmV=qpFJrR3AcrTS3g@mail.gmail.com
Discussion: https://postgr.es/m/CAJcOf-fAdj=nDKMsRhQzndm-O13NY4dL6xGcEvdX5Xvbbi0V7g@mail.gmail.com
This commit adds new GUC track_wal_io_timing. When this is enabled,
the total amounts of time XLogWrite writes and issue_xlog_fsync syncs
WAL data to disk are counted in pg_stat_wal. This information would be
useful to check how much WAL write and sync affect the performance.
Enabling track_wal_io_timing will make the server query the operating
system for the current time every time WAL is written or synced,
which may cause significant overhead on some platforms. To avoid such
additional overhead in the server with track_io_timing enabled,
this commit introduces track_wal_io_timing as a separate parameter from
track_io_timing.
Note that WAL write and sync activity by walreceiver has not been tracked yet.
This commit makes the server also track the numbers of times XLogWrite
writes and issue_xlog_fsync syncs WAL data to disk, in pg_stat_wal,
regardless of the setting of track_wal_io_timing. This counters can be
used to calculate the WAL write and sync time per request, for example.
Bump PGSTAT_FILE_FORMAT_ID.
Bump catalog version.
Author: Masahiro Ikeda
Reviewed-By: Japin Li, Hayato Kuroda, Masahiko Sawada, David Johnston, Fujii Masao
Discussion: https://postgr.es/m/0509ad67b585a5b86a83d445dfa75392@oss.nttdata.com
The command (TO or FROM), its type (file, pipe, program or callback),
and the number of tuples excluded by a WHERE clause in COPY FROM are
added to the progress reporting already available.
The column "lines_processed" is renamed to "tuples_processed" to
disambiguate the meaning of this column in the cases of CSV and BINARY
COPY and to be more consistent with the other catalog progress views.
Bump catalog version, again.
Author: Matthias van de Meent
Reviewed-by: Michael Paquier, Justin Pryzby, Bharath Rupireddy, Josef
Šimánek, Tomas Vondra
Discussion: https://postgr.es/m/CAEze2WiOcgdH4aQA8NtZq-4dgvnJzp8PohdeKchPkhMY-jWZXA@mail.gmail.com
PostgreSQL disabled compression as of e3bdb2d and the documentation
recommends against using it since. Additionally, SSL compression has
been disabled in OpenSSL since version 1.1.0, and was disabled in many
distributions long before that. The most recent TLS version, TLSv1.3,
disallows compression at the protocol level.
This commit removes the feature itself, removing support for the libpq
parameter sslcompression (parameter still listed for compatibility
reasons with existing connection strings, just ignored), and removes
the equivalent field in pg_stat_ssl and de facto PgBackendSSLStatus.
Note that, on top of removing the ability to activate compression by
configuration, compression is actively disabled in both frontend and
backend to avoid overrides from local configurations.
A TAP test is added for deprecated SSL parameters to check after
backwards compatibility.
Bump catalog version.
Author: Daniel Gustafsson
Reviewed-by: Peter Eisentraut, Magnus Hagander, Michael Paquier
Discussion: https://postgr.es/m/7E384D48-11C5-441B-9EC3-F7DB1F8518F6@yesql.se
The initial catalog data for this function failed to set proretset
or provide a prorows estimate. It accidentally worked anyway when
invoked in the FROM clause, because the executor isn't too picky
about this; but the planner didn't expect the function to return
multiple rows, which could lead to bad plans. Also the function
would fail if invoked in the SELECT list.
We can't easily back-patch this fix, but fortunately the bug's
consequences aren't awful in most cases. Getting this right is
mainly an exercise in future-proofing.
Discussion: https://postgr.es/m/1636062.1615141782@sss.pgh.pa.us
Protocol version 3 was introduced in PostgreSQL 7.4. There shouldn't be
many clients or servers left out there without version 3 support. But as
a courtesy, I kept just enough of the old protocol support that we can
still send the "unsupported protocol version" error in v2 format, so that
old clients can display the message properly. Likewise, libpq still
understands v2 ErrorResponse messages when establishing a connection.
The impetus to do this now is that I'm working on a patch to COPY
FROM, to always prefetch some data. We cannot do that safely with the
old protocol, because it requires parsing the input one byte at a time
to detect the end-of-copy marker.
Reviewed-by: Tom Lane, Alvaro Herrera, John Naylor
Discussion: https://www.postgresql.org/message-id/9ec25819-0a8a-d51a-17dc-4150bb3cca3b%40iki.fi
This expands the binary validation in pg_upgrade with a version
check per binary to ensure that the target cluster installation
only contains binaries from the target version.
In order to reduce duplication, validate_exec is exported from
port.h and the local copy in pg_upgrade is removed.
Author: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/flat/9328.1552952117@sss.pgh.pa.us
Commit 0aa8a01d04 extends the output plugin API to allow decoding of
prepared xacts and allowed the user to enable/disable the two-phase option
via pg_logical_slot_get_changes(). This can lead to a problem such that
the first time when it gets changes via pg_logical_slot_get_changes()
without two_phase option enabled it will not get the prepared even though
prepare is after consistent snapshot. Now next time during getting changes,
if the two_phase option is enabled it can skip prepare because by that
time start decoding point has been moved. So the user will only get commit
prepared.
Allow to enable/disable this option at the create slot time and default
will be false. It will break the existing slots which is fine in a major
release.
Author: Ajin Cherian
Reviewed-by: Amit Kapila and Vignesh C
Discussion: https://postgr.es/m/d0f60d60-133d-bf8d-bd70-47784d8fabf3@enterprisedb.com
Point to the specific line where the error was detected; the
previous code tended to include several preceding lines as well.
Avoid re-scanning the entire input to recompute which line that
was. Simplify the logic a bit. Add test cases.
Simon Riggs and Hamid Akhtar, reviewed by Daniel Gustafsson and myself
Discussion: https://postgr.es/m/CANbhV-EPBnXm3MF_TTWBwwqgn1a1Ghmep9VHfqmNBQ8BT0f+_g@mail.gmail.com
In commit a271a1b50e, we allowed decoding at prepare time and the prepare
was decoded again if there is a restart after decoding it. It was done
that way because we can't distinguish between the cases where we have not
decoded the prepare because it was prior to consistent snapshot or we have
decoded it earlier but restarted. To distinguish between these two cases,
we have introduced an initial_consistent_point at the slot level which is
an LSN at which we found a consistent point at the time of slot creation.
This is also the point where we have exported a snapshot for the initial
copy. So, prepare transaction prior to this point are sent along with
commit prepared.
This commit bumps SNAPBUILD_VERSION because of change in SnapBuild. It
will break existing slots which is fine in a major release.
Author: Ajin Cherian, based on idea by Andres Freund
Reviewed-by: Amit Kapila and Vignesh C
Discussion: https://postgr.es/m/d0f60d60-133d-bf8d-bd70-47784d8fabf3@enterprisedb.com
Traditionally, SIGUSR1 has been overloaded for ad-hoc signals,
procsignal.c signals and latch.c wakeups. Move that last use over to a
new dedicated signal. SIGURG is normally used to report out-of-band
socket data, but PostgreSQL doesn't use that facility.
The signal handler is now installed in all postmaster children by
InitializeLatchSupport(). Those wishing to disconnect from it should
call ShutdownLatchSupport().
Future patches will use this separation of signals to avoid the need for
a signal handler on some operating systems.
Discussion: https://postgr.es/m/CA+hUKGJjxPDpzBE0a3hyUywBvaZuC89yx3jK9RFZgfv_KHU7gg@mail.gmail.com
This adds a new executor node named TID Range Scan. The query planner
will generate paths for TID Range scans when quals are discovered on base
relations which search for ranges on the table's ctid column. These
ranges may be open at either end. For example, WHERE ctid >= '(10,0)';
will return all tuples on page 10 and over.
To support this, two new optional callback functions have been added to
table AM. scan_set_tidrange is used to set the scan range to just the
given range of TIDs. scan_getnextslot_tidrange fetches the next tuple
in the given range.
For AMs were scanning ranges of TIDs would not make sense, these functions
can be set to NULL in the TableAmRoutine. The query planner won't
generate TID Range Scan Paths in that case.
Author: Edmund Horner, David Rowley
Reviewed-by: David Rowley, Tomas Vondra, Tom Lane, Andres Freund, Zhihong Yu
Discussion: https://postgr.es/m/CAMyN-kB-nFTkF=VA_JPwFNo08S0d-Yk0F741S2B7LDmYAi8eyA@mail.gmail.com
The previous logic here created a separate pool of arcs for each
state, so that the out-arcs of each state were physically stored
within it. Perhaps this choice was driven by trying to not include
a "from" pointer within each arc; but Spencer gave up on that idea
long ago, and it's hard to see what the value is now. The approach
turns out to be fairly disastrous in terms of memory consumption,
though. In the first place, NFAs built by this engine seem to have
about 4 arcs per state on average, with a majority having only one
or two out-arcs. So pre-allocating 10 out-arcs for each state is
already cause for a factor of two or more bloat. Worse, the NFA
optimization phase moves arcs around with abandon. In a large NFA,
some of the states will have hundreds of out-arcs, so towards the
end of the optimization phase we have a significant number of states
whose arc pools have room for hundreds of arcs each, even though only
a few of those arcs are in use. We have seen real-world regexes in
which this effect bloats the memory requirement by 25X or even more.
Hence, get rid of the per-state arc pools in favor of a single arc
pool for the whole NFA, with variable-sized allocation batches
instead of always asking for 10 at a time. While we're at it,
let's batch the allocations of state structs too, to further reduce
the malloc traffic.
This incidentally allows moveouts() to be optimized in a similar
way to moveins(): when moving an arc to another state, it's now
valid to just re-link the same arc struct into a different outchain,
where before the code invariants required us to make a physically
new arc and then free the old one.
These changes reduce the regex compiler's typical space consumption
for average-size regexes by about a factor of two, and much more for
large or complicated regexes. In a large test set of real-world
regexes, we formerly had half a dozen cases that failed with "regular
expression too complex" due to exceeding the REG_MAX_COMPILE_SPACE
limit (about 150MB); we would have had to raise that limit to
something close to 400MB to make them work with the old code. Now,
none of those cases need more than 13MB to compile. Furthermore,
the test set is about 10% faster overall due to less malloc traffic.
Discussion: https://postgr.es/m/168861.1614298592@sss.pgh.pa.us
Teach VACUUM VERBOSE to report on pages deleted by the _current_ VACUUM
operation -- these are newly deleted pages. VACUUM VERBOSE continues to
report on the total number of deleted pages in the entire index (no
change there). The former is a subset of the latter.
The distinction between each category of deleted index page only arises
with index AMs where page deletion is supported and is decoupled from
page recycling for performance reasons.
This is follow-up work to commit e5d8a999, which made nbtree store
64-bit XIDs (not 32-bit XIDs) in pages at the point at which they're
deleted. Note that the btm_last_cleanup_num_delpages metapage field
added by that commit usually gets set to pages_newly_deleted. The
exceptions (the scenarios in which they're not equal) all seem to be
tricky cases for the implementation (of page deletion and recycling) in
general.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WznpdHvujGUwYZ8sihX%3Dd5u-tRYhi-F4wnV2uN2zHpMUXw%40mail.gmail.com
The complement-class escapes \D, \S, \W are now allowed within
bracket expressions. There is no semantic difficulty with doing
that, but the rather hokey macro-expansion-based implementation
previously used here couldn't cope.
Also, invent "word" as an allowed character class name, thus "\w"
is now equivalent to "[[:word:]]" outside brackets, or "[:word:]"
within brackets. POSIX allows such implementation-specific
extensions, and the same name is used in e.g. bash.
One surprising compatibility issue this raises is that constructs
such as "[\w-_]" are now disallowed, as our documentation has always
said they should be: character classes can't be endpoints of a range.
Previously, because \w was just a macro for "[:alnum:]_", such a
construct was read as "[[:alnum:]_-_]", so it was accepted so long as
the character after "-" was numerically greater than or equal to "_".
Some implementation cleanup along the way:
* Remove the lexnest() hack, and in consequence clean up wordchrs()
to not interact with the lexer.
* Fix colorcomplement() to not be O(N^2) in the number of colors
involved.
* Get rid of useless-as-far-as-I-can-see calls of element()
on single-character character element names in brackpart().
element() always maps these to the character itself, and things
would be quite broken if it didn't --- should "[a]" match something
different than "a" does? Besides, the shortcut path in brackpart()
wasn't doing this anyway, making it even more inconsistent.
Discussion: https://postgr.es/m/2845172.1613674385@sss.pgh.pa.us
Discussion: https://postgr.es/m/3220564.1613859619@sss.pgh.pa.us
Otherwise we risk "leaking" deleted pages by making them non-recyclable
indefinitely. Commit 6655a729 did the same thing for deleted pages in
GiST indexes. That work was used as a starting point here.
Stop storing an XID indicating the oldest bpto.xact across all deleted
though unrecycled pages in nbtree metapages. There is no longer any
reason to care about that condition/the oldest XID. It only ever made
sense when wraparound was something _bt_vacuum_needs_cleanup() had to
consider.
The btm_oldest_btpo_xact metapage field has been repurposed and renamed.
It is now btm_last_cleanup_num_delpages, which is used to remember how
many non-recycled deleted pages remain from the last VACUUM (in practice
its value is usually the precise number of pages that were _newly
deleted_ during the specific VACUUM operation that last set the field).
The general idea behind storing btm_last_cleanup_num_delpages is to use
it to give _some_ consideration to non-recycled deleted pages inside
_bt_vacuum_needs_cleanup() -- though never too much. We only really
need to avoid leaving a truly excessive number of deleted pages in an
unrecycled state forever. We only do this to cover certain narrow cases
where no other factor makes VACUUM do a full scan, and yet the index
continues to grow (and so actually misses out on recycling existing
deleted pages).
These metapage changes result in a clear user-visible benefit: We no
longer trigger full index scans during VACUUM operations solely due to
the presence of only 1 or 2 known deleted (though unrecycled) blocks
from a very large index. All that matters now is keeping the costs and
benefits in balance over time.
Fix an issue that has been around since commit 857f9c36, which added the
"skip full scan of index" mechanism (i.e. the _bt_vacuum_needs_cleanup()
logic). The accuracy of btm_last_cleanup_num_heap_tuples accidentally
hinged upon _when_ the source value gets stored. We now always store
btm_last_cleanup_num_heap_tuples in btvacuumcleanup(). This fixes the
issue because IndexVacuumInfo.num_heap_tuples (the source field) is
expected to accurately indicate the state of the table _after_ the
VACUUM completes inside btvacuumcleanup().
A backpatchable fix cannot easily be extracted from this commit. A
targeted fix for the issue will follow in a later commit, though that
won't happen today.
I (pgeoghegan) have chosen to remove any mention of deleted pages in the
documentation of the vacuum_cleanup_index_scale_factor GUC/param, since
the presence of deleted (though unrecycled) pages is no longer of much
concern to users. The vacuum_cleanup_index_scale_factor description in
the docs now seems rather unclear in any case, and it should probably be
rewritten in the near future. Perhaps some passing mention of page
deletion will be added back at the same time.
Bump XLOG_PAGE_MAGIC due to nbtree WAL records using full XIDs now.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznpdHvujGUwYZ8sihX=d5u-tRYhi-F4wnV2uN2zHpMUXw@mail.gmail.com
Instead of an unsightly internal "cache lookup failed" message, just
return NULL for bad OIDs, as is the convention for other similar things.
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20210117215940.GE8560%40telsasoft.com
Previously, each pair of capturing parentheses gave rise to a separate
subre tree node, whose only function was to identify that we ought to
capture the match details for this particular sub-expression. In
most cases we don't really need that, since we can perfectly well
put a "capture this" annotation on the child node that does the real
matching work. As with the two preceding commits, the main value
of this is to avoid generating and optimizing an NFA for a tree node
that's not really pulling its weight.
The chosen data representation only allows one capture annotation
per subre node. In the legal-per-spec, but seemingly not very useful,
case where there are multiple capturing parens around the exact same
bit of the regex (i.e. "((xyz))"), wrap the child node in N-1 capture
nodes that act the same as before. We could work harder at that but
I'll refrain, pending some evidence that such cases are worth troubling
over.
In passing, improve the comments in regex.h to say what all the
different re_info bits mean. Some of them were pretty obvious
but others not so much, so reverse-engineer some documentation.
This is part of a patch series that in total reduces the regex engine's
runtime by about a factor of four on a large corpus of real-world regexes.
Patch by me, reviewed by Joel Jacobson
Discussion: https://postgr.es/m/1340281.1613018383@sss.pgh.pa.us
Instead of having left and right child links in subre structs,
have a single child link plus a sibling link. Multiple children
of a tree node are now reached by chasing the sibling chain.
The beneficiary of this is alternation tree nodes. A regular
expression with N (>1) branches is now represented by one alternation
node with N children, rather than a tree that includes N alternation
nodes as well as N children. While the old representation didn't
really cost anything extra at execution time, it was pretty horrid
for compilation purposes, because each of the alternation nodes had
its own NFA, which we were too stupid not to separately optimize.
(To make matters worse, all of those NFAs described the entire
alternation pattern, not just the portion of it that one might
expect from the tree structure.)
We continue to require concatenation nodes to have exactly two
children. This data structure is now prepared to support more,
but the executor's logic would need some careful redesign, and
it's not clear that a lot of benefit could be had.
This is part of a patch series that in total reduces the regex engine's
runtime by about a factor of four on a large corpus of real-world regexes.
Patch by me, reviewed by Joel Jacobson
Discussion: https://postgr.es/m/1340281.1613018383@sss.pgh.pa.us
This builds on the previous "rainbow" patch to detect NFAs that will
match any string, though possibly with constraints on the string length.
This definition is chosen to match constructs such as ".*", ".+", and
".{1,100}". Recognizing such an NFA after the optimization pass is
fairly cheap, since we basically just have to verify that all arcs
are RAINBOW arcs and count the number of steps to the end state.
(Well, there's a bit of complication with pseudo-color arcs for string
boundary conditions, but not much.)
Once we have these markings, the regex executor functions longest(),
shortest(), and matchuntil() don't have to expend per-character work
to determine whether a given substring satisfies such an NFA; they
just need to check its length against the bounds. Since some matching
problems require O(N) invocations of these functions, we've reduced
the runtime for an N-character string from O(N^2) to O(N). Of course,
this is no help for non-matchall sub-patterns, but those usually have
constraints that allow us to avoid needing O(N) substring checks in the
first place. It's precisely the unconstrained "match-all" cases that
cause the most headaches.
This is part of a patch series that in total reduces the regex engine's
runtime by about a factor of four on a large corpus of real-world regexes.
Patch by me, reviewed by Joel Jacobson
Discussion: https://postgr.es/m/1340281.1613018383@sss.pgh.pa.us
Some regular expression constructs, most notably the "." match-anything
metacharacter, produce a sheaf of parallel NFA arcs covering all
possible colors (that is, character equivalence classes). We can make
a noticeable improvement in the space and time needed to process large
regexes by replacing such cases with a single arc bearing the special
color code "RAINBOW". This requires only minor additional complication
in places such as pull() and push().
Callers of pg_reg_getoutarcs() must now be prepared for the possibility
of seeing a RAINBOW arc. For the one known user, contrib/pg_trgm,
that's a net benefit since it cuts the number of arcs to be dealt with,
and the handling isn't any different than for other colors that contain
too many characters to be dealt with individually.
This is part of a patch series that in total reduces the regex engine's
runtime by about a factor of four on a large corpus of real-world regexes.
Patch by me, reviewed by Joel Jacobson
Discussion: https://postgr.es/m/1340281.1613018383@sss.pgh.pa.us
Add another method to specify CRLs, hashed directory method, for both
server and client side. This offers a means for server or libpq to
load only CRLs that are required to verify a certificate. The CRL
directory is specifed by separate GUC variables or connection options
ssl_crl_dir and sslcrldir, alongside the existing ssl_crl_file and
sslcrl, so both methods can be used at the same time.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/20200731.173911.904649928639357911.horikyota.ntt@gmail.com
Several information schema views track dependencies between
functions/procedures and objects used by them. These had not been
implemented so far because PostgreSQL doesn't track objects used in a
function body. However, formally, these also show dependencies used
in parameter default expressions, which PostgreSQL does support and
track. So for the sake of completeness, we might as well add these.
If dependency tracking for function bodies is ever implemented, these
views will automatically work correctly.
Reviewed-by: Erik Rijkers <er@xs4all.nl>
Discussion: https://www.postgresql.org/message-id/flat/ac80fc74-e387-8950-9a31-2560778fc1e3%40enterprisedb.com
Commit 2f2007fbb did this partially, but there were two remaining
warts. checkcondition_gin handled some uncertain cases by setting
the out-of-band recheck flag, some by returning TS_MAYBE, and some
by doing both. Meanwhile, TS_execute arbitrarily converted a
TS_MAYBE result to TS_YES. Thus, if checkcondition_gin chose to
only return TS_MAYBE, the outcome would be TS_YES with no recheck
flag, potentially resulting in wrong query outputs.
The case where this'd happen is if there were GIN_MAYBE entries
in the indexscan results passed to gin_tsquery_[tri]consistent,
which so far as I can see would only happen if the tidbitmap used
to accumulate indexscan results grew large enough to become lossy.
I initially thought of fixing this by ensuring we always set the
recheck flag as well as returning TS_MAYBE in uncertain cases.
But that errs in the other direction, potentially forcing rechecks
of rows that provably match the query (since the recheck flag
remains set even if TS_execute later finds that the answer must be
TS_YES). Instead, let's get rid of the out-of-band recheck flag
altogether and rely on returning TS_MAYBE. This requires exporting
a version of TS_execute that will actually return the full ternary
result of the evaluation ... but we likely should have done that
to start with.
Unfortunately it doesn't seem practical to add a regression test case
that covers this: the amount of data needed to cause the GIN bitmap to
become lossy results in a longer runtime than I think we want to have
in the tests. (I'm wondering about allowing smaller work_mem settings
to ameliorate that, but it'd be a matter for a separate patch.)
Per bug #16865 from Dimitri Nüscheler. Back-patch to v13 where
the faulty commit came in.
Discussion: https://postgr.es/m/16865-4ffdc3e682e6d75b@postgresql.org
Both luckily and unluckily the passed values meant the same for all
types. Luckily because that meant my confusion caused no harm,
unluckily because otherwise the compiler might have warned...
In passing, synchronize parameter names between definition and
declaration.
Reported-By: Peter Geoghegan <pg@bowt.ie>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-Wz=L=nBoepQdH9b5Qd0nMvepFT2CnT6sjWvvpOXa=K8HVQ@mail.gmail.com
If ExecGetInsertedCols(), ExecGetUpdatedCols() or ExecGetExtraUpdatedCols()
were called with a ResultRelInfo that's not in the range table and isn't a
partition routing target, the functions would dereference a NULL pointer,
relinfo->ri_RootResultRelInfo. Such ResultRelInfos are created when firing
RI triggers in tables that are not modified directly. None of the current
callers of these functions pass such relations, so this isn't a live bug,
but let's make them more robust.
Also update comment in ResultRelInfo; after commit 6214e2b228,
ri_RangeTableIndex is zero for ResultRelInfos created for partition tuple
routing.
Noted by Coverity. Backpatch down to v11, like commit 6214e2b228.
Reviewed-by: Tom Lane, Amit Langote
This commit adds new column "waitstart" into pg_locks view. This column
reports the time when the server process started waiting for the lock
if the lock is not held. This information is useful, for example, when
examining the amount of time to wait on a lock by subtracting
"waitstart" in pg_locks from the current time, and identify the lock
that the processes are waiting for very long.
This feature uses the current time obtained for the deadlock timeout
timer as "waitstart" (i.e., the time when this process started waiting
for the lock). Since getting the current time newly can cause overhead,
we reuse the already-obtained time to avoid that overhead.
Note that "waitstart" is updated without holding the lock table's
partition lock, to avoid the overhead by additional lock acquisition.
This can cause "waitstart" in pg_locks to become NULL for a very short
period of time after the wait started even though "granted" is false.
This is OK in practice because we can assume that users are likely to
look at "waitstart" when waiting for the lock for a long time.
The first attempt of this patch (commit 3b733fcd04) caused the buildfarm
member "rorqual" (built with --disable-atomics --disable-spinlocks) to report
the failure of the regression test. It was reverted by commit 890d2182a2.
The cause of this failure was that the atomic variable for "waitstart"
in the dummy process entry created at the end of prepare transaction was
not initialized. This second attempt fixes that issue.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Ian Lawrence Barwick, Robert Haas, Justin Pryzby, Fujii Masao
Discussion: https://postgr.es/m/a96013dc51cdc56b2a2b84fa8a16a993@oss.nttdata.com
FreeBSD 13 gained O_DSYNC, which would normally cause wal_sync_method to
choose open_datasync as its default value. That may not be a good
choice for all systems, and performs worse than fdatasync in some
scenarios. Let's preserve the existing default behavior for now.
Like commit 576477e73c, which did the same for Linux, back-patch to all
supported releases.
Discussion: https://postgr.es/m/CA%2BhUKGLsAMXBQrCxCXoW-JsUYmdOL8ALYvaX%3DCrHqWxm-nWbGA%40mail.gmail.com
With its current design, a careless use of pg_cryptohash_final() could
would result in an out-of-bound write in memory as the size of the
destination buffer to store the result digest is not known to the
cryptohash internals, without the caller knowing about that. This
commit adds a new argument to pg_cryptohash_final() to allow such sanity
checks, and implements such defenses.
The internals of SCRAM for HMAC could be tightened a bit more, but as
everything is based on SCRAM_KEY_LEN with uses particular to this code
there is no need to complicate its interface more than necessary, and
this comes back to the refactoring of HMAC in core. Except that, this
minimizes the uses of the existing DIGEST_LENGTH variables, relying
instead on sizeof() for the result sizes. In ossp-uuid, this also makes
the code more defensive, as it already relied on dce_uuid_t being at
least the size of a MD5 digest.
This is in philosophy similar to cfc40d3 for base64.c and aef8948 for
hex.c.
Reported-by: Ranier Vilela
Author: Michael Paquier, Ranier Vilela
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAEudQAoqEGmcff3J4sTSV-R_16Monuz-UpJFbf_dnVH=APr02Q@mail.gmail.com
When REG_DEBUG is defined, ensure that an un-filled "struct cnfa"
is all-zeroes, not just that it has nstates == 0. This is mainly
so that looking at "struct subre" structs in gdb doesn't distract
one with a lot of garbage fields during regex compilation.
Adjust some places that print debug output to have suitable fflush
calls afterwards.
In passing, correct an erroneous ancient comment: the concatenation
subre-s created by parsebranch() have op == '.' not ','.
Noted while fooling around with some regex performance improvements.
Modern gcc and clang compilers offer alignment sanitizers, which help to detect
pointer misalignment. However, our codebase already contains x86-specific
crc32 computation code, which uses unalignment access. Thankfully, those
compilers also support the attribute, which disables alignment sanitizers at
the function level. This commit adds pg_attribute_no_sanitize_alignment(),
which wraps this attribute, and applies it to pg_comp_crc32c_sse42() function.
Discussion: https://postgr.es/m/CAPpHfdsne3%3DT%3DfMNU45PtxdhSL_J2PjLTeS8rwKnJzUR4YNd4w%40mail.gmail.com
Discussion: https://postgr.es/m/475514.1612745257%40sss.pgh.pa.us
Author: Alexander Korotkov, revised by Tom Lane
Reviewed-by: Tom Lane
For the initial table data synchronization in logical replication, we use
a single transaction to copy the entire table and then synchronize the
position in the stream with the main apply worker.
There are multiple downsides of this approach: (a) We have to perform the
entire copy operation again if there is any error (network breakdown,
error in the database operation, etc.) while we synchronize the WAL
position between tablesync worker and apply worker; this will be onerous
especially for large copies, (b) Using a single transaction in the
synchronization-phase (where we can receive WAL from multiple
transactions) will have the risk of exceeding the CID limit, (c) The slot
will hold the WAL till the entire sync is complete because we never commit
till the end.
This patch solves all the above downsides by allowing multiple
transactions during the tablesync phase. The initial copy is done in a
single transaction and after that, we commit each transaction as we
receive. To allow recovery after any error or crash, we use a permanent
slot and origin to track the progress. The slot and origin will be removed
once we finish the synchronization of the table. We also remove slot and
origin of tablesync workers if the user performs DROP SUBSCRIPTION .. or
ALTER SUBSCRIPTION .. REFERESH and some of the table syncs are still not
finished.
The commands ALTER SUBSCRIPTION ... REFRESH PUBLICATION and
ALTER SUBSCRIPTION ... SET PUBLICATION ... with refresh option as true
cannot be executed inside a transaction block because they can now drop
the slots for which we have no provision to rollback.
This will also open up the path for logical replication of 2PC
transactions on the subscriber side. Previously, we can't do that because
of the requirement of maintaining a single transaction in tablesync
workers.
Bump catalog version due to change of state in the catalog
(pg_subscription_rel).
Author: Peter Smith, Amit Kapila, and Takamichi Osumi
Reviewed-by: Ajin Cherian, Petr Jelinek, Hou Zhijie and Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1KHJxaZS-fod-0fey=0tq3=Gkn4ho=8N4-5HWiCfu0H1A@mail.gmail.com
The pages_removed field is no longer used for anything. It hasn't been
possible for an index to physically shrink since old-style VACUUM FULL
was removed by commit 0a469c87.
In the wake of c028faf2a, this is no longer needed. I left it
out of that patch since the API change would be undesirable in
a released branch; but there's no reason not to do it in HEAD.
This commit makes more generic some comments and code related to the
compilation with OpenSSL and SSL in general to ease the addition of more
SSL implementations in the future. In libpq, some OpenSSL-only code is
moved under USE_OPENSSL and not USE_SSL.
While on it, make a comment more consistent in libpq-fe.h.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/5382CB4A-9CF3-4145-BA46-C802615935E0@yesql.se
For an index, attstattarget can be updated using ALTER INDEX SET
STATISTICS. This data was lost on the new index after REINDEX
CONCURRENTLY.
The update of this field is done when the old and new indexes are
swapped to make the fix back-patchable. Another approach we could look
after in the long-term is to change index_create() to pass the wanted
values of attstattarget when creating the new relation, but, as this
would cause an ABI breakage this can be done only on HEAD.
Reported-by: Ronan Dunklau
Author: Michael Paquier
Reviewed-by: Ronan Dunklau, Tomas Vondra
Discussion: https://postgr.es/m/16628084.uLZWGnKmhe@laptop-ronand
Backpatch-through: 12
Currently, we get the origin id from the name and then drop the origin by
taking ExclusiveLock on ReplicationOriginRelationId. So, two concurrent
sessions can get the id from the name at the same time and then when they
try to drop the origin, one of the sessions will get the either
"tuple concurrently deleted" or "cache lookup failed for replication
origin ..".
To prevent this race condition we do the entire operation under lock. This
obviates the need for replorigin_drop() API and we have removed it so if
any extension authors are using it they need to instead use
replorigin_drop_by_name. See it's usage in pg_replication_origin_drop().
Author: Peter Smith
Reviewed-by: Amit Kapila, Euler Taveira, Petr Jelinek, and Alvaro
Herrera
Discussion: https://www.postgresql.org/message-id/CAHut%2BPuW8DWV5fskkMWWMqzt-x7RPcNQOtJQBp6SdwyRghCk7A%40mail.gmail.com
This commit adds new column "waitstart" into pg_locks view. This column
reports the time when the server process started waiting for the lock
if the lock is not held. This information is useful, for example, when
examining the amount of time to wait on a lock by subtracting
"waitstart" in pg_locks from the current time, and identify the lock
that the processes are waiting for very long.
This feature uses the current time obtained for the deadlock timeout
timer as "waitstart" (i.e., the time when this process started waiting
for the lock). Since getting the current time newly can cause overhead,
we reuse the already-obtained time to avoid that overhead.
Note that "waitstart" is updated without holding the lock table's
partition lock, to avoid the overhead by additional lock acquisition.
This can cause "waitstart" in pg_locks to become NULL for a very short
period of time after the wait started even though "granted" is false.
This is OK in practice because we can assume that users are likely to
look at "waitstart" when waiting for the lock for a long time.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Ian Lawrence Barwick, Robert Haas, Justin Pryzby, Fujii Masao
Discussion: https://postgr.es/m/a96013dc51cdc56b2a2b84fa8a16a993@oss.nttdata.com
This option controls if toast tables associated with a relation are
vacuumed or not when running a manual VACUUM. It was already possible
to trigger a manual VACUUM on a toast relation without processing its
main relation, but a manual vacuum on a main relation always forced a
vacuum on its toast table. This is useful in scenarios where the level
of bloat or transaction age of the main and toast relations differs a
lot.
This option is an extension of the existing VACOPT_SKIPTOAST that was
used by autovacuum to control if toast relations should be skipped or
not. This internal flag is renamed to VACOPT_PROCESS_TOAST for
consistency with the new option.
A new option switch, called --no-process-toast, is added to vacuumdb.
Author: Nathan Bossart
Reviewed-by: Kirk Jamison, Michael Paquier, Justin Pryzby
Discussion: https://postgr.es/m/BA8951E9-1524-48C5-94AF-73B1F0D7857F@amazon.com
If a cross-partition UPDATE violates a constraint on the target partition,
and the columns in the new partition are in different physical order than
in the parent, the error message can reveal columns that the user does not
have SELECT permission on. A similar bug was fixed earlier in commit
804b6b6db4.
The cause of the bug is that the callers of the
ExecBuildSlotValueDescription() function got confused when constructing
the list of modified columns. If the tuple was routed from a parent, we
converted the tuple to the parent's format, but the list of modified
columns was grabbed directly from the child's RTE entry.
ExecUpdateLockMode() had a similar issue. That lead to confusion on which
columns are key columns, leading to wrong tuple lock being taken on tables
referenced by foreign keys, when a row is updated with INSERT ON CONFLICT
UPDATE. A new isolation test is added for that corner case.
With this patch, the ri_RangeTableIndex field is no longer set for
partitions that don't have an entry in the range table. Previously, it was
set to the RTE entry of the parent relation, but that was confusing.
NOTE: This modifies the ResultRelInfo struct, replacing the
ri_PartitionRoot field with ri_RootResultRelInfo. That's a bit risky to
backpatch, because it breaks any extensions accessing the field. The
change that ri_RangeTableIndex is not set for partitions could potentially
break extensions, too. The ResultRelInfos are visible to FDWs at least,
and this patch required small changes to postgres_fdw. Nevertheless, this
seem like the least bad option. I don't think these fields widely used in
extensions; I don't think there are FDWs out there that uses the FDW
"direct update" API, other than postgres_fdw. If there is, you will get a
compilation error, so hopefully it is caught quickly.
Backpatch to 11, where support for both cross-partition UPDATEs, and unique
indexes on partitioned tables, were added.
Reviewed-by: Amit Langote
Security: CVE-2021-3393
GlobalVisIsRemovableFullXid() is now GlobalVisCheckRemovableFullXid().
This is consistent with the general convention for FullTransactionId
equivalents of functions that deal with TransactionId values. It now
matches the nearby GlobalVisCheckRemovableXid() function, which performs
the same check for callers that use TransactionId values.
Oversight in commit dc7420c2c9.
Discussion: https://postgr.es/m/CAH2-Wzmes12jFNDcVgpU89Vp=r6uLFrE-MT0fjSWGsE70UiNaA@mail.gmail.com
The parallel slots infrastructure (which implements client-side
multiplexing of server connections doing similar things, not
threading or multiple processes or anything like that) are moved from
src/bin/scripts/scripts_parallel.c to src/fe_utils/parallel_slot.c.
The functions consumeQueryResult() and processQueryResult() which were
previously part of src/bin/scripts/common.c are now moved into that
file as well, becoming static helper functions. This might need to be
changed in the future, but currently they're not used for anything
else.
Some other functions from src/bin/scripts/common.c are moved to to
src/fe_utils and are split up among several files. connectDatabase(),
connectMaintenanceDatabase(), and disconnectDatabase() are moved to
connect_utils.c. executeQuery(), executeCommand(), and
executeMaintenanceCommand() are move to query_utils.c.
handle_help_version_opts() is moved to option_utils.c.
Mark Dilger, reviewed by me. The larger patch series of which this is
a part has also had review from Peter Geoghegan, Andres Freund, Álvaro
Herrera, Michael Paquier, and Amul Sul, but I don't know whether any
of them have reviewed this bit specifically.
Discussion: http://postgr.es/m/12ED3DA8-25F0-4B68-937D-D907CFBF08E7@enterprisedb.com
Discussion: http://postgr.es/m/5F743835-3399-419C-8324-2D424237E999@enterprisedb.com
Discussion: http://postgr.es/m/70655DF3-33CE-4527-9A4D-DDEB582B6BA0@enterprisedb.com
This patch adds the possibility to move indexes to a new tablespace
while rebuilding them. Both the concurrent and the non-concurrent cases
are supported, and the following set of restrictions apply:
- When using TABLESPACE with a REINDEX command that targets a
partitioned table or index, all the indexes of the leaf partitions are
moved to the new tablespace. The tablespace references of the non-leaf,
partitioned tables in pg_class.reltablespace are not changed. This
requires an extra ALTER TABLE SET TABLESPACE.
- Any index on a toast table rebuilt as part of a parent table is kept
in its original tablespace.
- The operation is forbidden on system catalogs, including trying to
directly move a toast relation with REINDEX. This results in an error
if doing REINDEX on a single object. REINDEX SCHEMA, DATABASE and
SYSTEM skip system relations when TABLESPACE is used.
Author: Alexey Kondratov, Michael Paquier, Justin Pryzby
Reviewed-by: Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/8a8f5f73-00d3-55f8-7583-1375ca8f6a91@postgrespro.ru
The logic for converting the shell-glob-like syntax supported by
utilities like psql and pg_dump to regular expression is
extracted into a new function patternToSQLRegex. The existing
function processSQLNamePattern now uses this function as a
subroutine.
patternToSQLRegex is a little more general than what is required
by processSQLNamePattern. That function is only interested in
patterns that can have up to 2 parts, a schema and a relation;
but patternToSQLRegex can limit the maximum number of parts to
between 1 and 3, so that patterns can look like either
"database.schema.relation", "schema.relation", or "relation"
depending on how it's invoked and what the user specifies.
processSQLNamePattern only passes two buffers, so works exactly
the same as before, always interpreting the pattern as either
a "schema.relation" pattern or a "relation" pattern. But,
future callers can use this function in other ways.
Mark Dilger, reviewed by me. The larger patch series of which this is
a part has also had review from Peter Geoghegan, Andres Freund, Álvaro
Herrera, Michael Paquier, and Amul Sul, but I don't know whether
any of them have reviewed this bit specifically.
Discussion: http://postgr.es/m/12ED3DA8-25F0-4B68-937D-D907CFBF08E7@enterprisedb.com
Discussion: http://postgr.es/m/5F743835-3399-419C-8324-2D424237E999@enterprisedb.com
Discussion: http://postgr.es/m/70655DF3-33CE-4527-9A4D-DDEB582B6BA0@enterprisedb.com
Now that commit 62f34097c attached BKI_LOOKUP annotation to all the
namespace and role OID columns in the catalogs, there's no real reason
to have the magic PGNSP and PGUID symbols. Get rid of them in favor
of implementing those lookups according to genbki.pl's normal pattern.
This means that in the catalog headers, BKI_DEFAULT(PGNSP) becomes
BKI_DEFAULT(pg_catalog), which seems a lot more transparent.
BKI_DEFAULT(PGUID) becomes BKI_DEFAULT(POSTGRES), which is perhaps
less so; but you can look into pg_authid.dat to discover that
POSTGRES is the nonce name for the bootstrap superuser.
This change also means that if we ever need cross-references in the
initial catalog data to any of the other built-in roles besides
POSTGRES, or to some other built-in schema besides pg_catalog,
we can just do it.
No catversion bump here, as there's no actual change in the contents
of postgres.bki.
Discussion: https://postgr.es/m/3240355.1612129197@sss.pgh.pa.us
This follows in the spirit of commit dfb75e478, which created primary
key and uniqueness constraints to improve the visibility of constraints
imposed on the system catalogs. While our catalogs contain many
foreign-key-like relationships, they don't quite follow SQL semantics,
in that the convention for an omitted reference is to write zero not
NULL. Plus, we have some cases in which there are arrays each of whose
elements is supposed to be an FK reference; SQL has no way to model that.
So we can't create actual foreign key constraints to describe the
situation. Nonetheless, we can collect and use knowledge about these
relationships.
This patch therefore adds annotations to the catalog header files to
declare foreign-key relationships. (The BKI_LOOKUP annotations cover
simple cases, but we weren't previously distinguishing which such
columns are allowed to contain zeroes; we also need new markings for
multi-column FK references.) Then, Catalog.pm and genbki.pl are
taught to collect this information into a table in a new generated
header "system_fk_info.h". The only user of that at the moment is
a new SQL function pg_get_catalog_foreign_keys(), which exposes the
table to SQL. The oidjoins regression test is rewritten to use
pg_get_catalog_foreign_keys() to find out which columns to check.
Aside from removing the need for manual maintenance of that test
script, this allows it to cover numerous relationships that were not
checked by the old implementation based on findoidjoins. (As of this
commit, 217 relationships are checked by the test, versus 181 before.)
Discussion: https://postgr.es/m/3240355.1612129197@sss.pgh.pa.us
It turns out that the calculation of [Merge]AppendPath.partitioned_rels
in allpaths.c is faulty and sometimes omits relevant non-leaf partitions,
allowing an assertion added by commit a929e17e5a to trigger. Rather
than fix that, it seems better to get rid of those fields altogether.
We don't really need the info until create_plan time, and calculating
it once for the selected plan should be cheaper than calculating it
for each append path we consider.
The preceding two commits did away with all use of the partitioned_rels
values; this commit just mechanically removes the fields and the code
that calculated them.
Discussion: https://postgr.es/m/87sg8tqhsl.fsf@aurora.ydns.eu
Discussion: https://postgr.es/m/CAJKUy5gCXDSmFs2c=R+VGgn7FiYcLCsEFEuDNNLGfoha=pBE_g@mail.gmail.com
This adds the SQL standard feature that adds the SEARCH and CYCLE
clauses to recursive queries to be able to do produce breadth- or
depth-first search orders and detect cycles. These clauses can be
rewritten into queries using existing syntax, and that is what this
patch does in the rewriter.
Reviewed-by: Vik Fearing <vik@postgresfriends.org>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/db80ceee-6f97-9b4a-8ee8-3ba0c58e5be2@2ndquadrant.com
This is a replacement for the existing --with-openssl, extending the
logic to make easier the addition of new SSL libraries. The grammar is
chosen to be similar to --with-uuid, where multiple values can be
chosen, with "openssl" as the only supported value for now.
The original switch, --with-openssl, is kept for compatibility.
Author: Daniel Gustafsson, Michael Paquier
Reviewed-by: Jacob Champion
Discussion: https://postgr.es/m/FAB21FC8-0F62-434F-AA78-6BD9336D630A@yesql.se
For those system catalogs that have a unique indexes, make a primary
key and unique constraint, using ALTER TABLE ... PRIMARY KEY/UNIQUE
USING INDEX.
This can be helpful for GUI tools that look for a primary key, and it
might in the future allow declaring foreign keys, for making schema
diagrams.
The constraint creation statements are automatically created by
genbki.pl from DECLARE_UNIQUE_INDEX directives. To specify which one
of the available unique indexes is the primary key, use the new
directive DECLARE_UNIQUE_INDEX_PKEY instead. By convention, we
usually make a catalog's OID column its primary key, if it has one.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/dc5f44d9-5ec1-a596-0251-dadadcdede98@2ndquadrant.com
The SQL standard allows a GRANTED BY clause on GRANT and
REVOKE (privilege) statements that can specify CURRENT_USER or
CURRENT_ROLE. In PostgreSQL, both of these are the default behavior.
Since we already have all the parsing support for this for the
GRANT (role) statement, we might as well add basic support for this
for the privilege variant as well. This allows us to check off SQL
feature T332. In the future, perhaps more interesting things could be
done with this, too.
Reviewed-by: Simon Riggs <simon@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/f2feac44-b4c5-f38f-3699-2851d6a76dc9@2ndquadrant.com
Given a permanent relation rewritten in the current transaction, the
old_snapshot_threshold mechanism assumed the relation had never been
subject to early pruning. Hence, a query could fail to report "snapshot
too old" when the rewrite followed an early truncation. ALTER TABLE SET
TABLESPACE is probably the only rewrite mechanism capable of exposing
this bug. REINDEX sets indcheckxmin, avoiding the problem. CLUSTER has
zeroed page LSNs since before old_snapshot_threshold existed, so
old_snapshot_threshold has never cooperated with it. ALTER TABLE
... SET DATA TYPE makes the table look empty to every past snapshot,
which is strictly worse. Back-patch to v13, where commit
c6b92041d3 broke this.
Kyotaro Horiguchi and Noah Misch
Discussion: https://postgr.es/m/20210113.160705.2225256954956139776.horikyota.ntt@gmail.com
In a cluster having used CREATE INDEX CONCURRENTLY while having enabled
prepared transactions, queries that use the resulting index can silently
fail to find rows. Fix this for future CREATE INDEX CONCURRENTLY by
making it wait for prepared transactions like it waits for ordinary
transactions. This expands the VirtualTransactionId structure domain to
admit prepared transactions. It may be necessary to reindex to recover
from past occurrences. Back-patch to 9.5 (all supported versions).
Andrey Borodin, reviewed (in earlier versions) by Tom Lane and Michael
Paquier.
Discussion: https://postgr.es/m/2E712143-97F7-4890-B470-4A35142ABC82@yandex-team.ru
perform_pruning_combine_step() was not taught about the number of
partition indexes used in hash partitioning; more embarrassingly,
get_matching_hash_bounds() also had it wrong. These errors are masked
in the common case where all the partitions have the same modulus
and no partition is missing. However, with missing or unequal-size
partitions, we could erroneously prune some partitions that need
to be scanned, leading to silently wrong query answers.
While a minimal-footprint fix for this could be to export
get_partition_bound_num_indexes and make the incorrect functions use it,
I'm of the opinion that that function should never have existed in the
first place. It's not reasonable data structure design that
PartitionBoundInfoData lacks any explicit record of the length of
its indexes[] array. Perhaps that was all right when it could always
be assumed equal to ndatums, but something should have been done about
it as soon as that stopped being true. Putting in an explicit
"nindexes" field makes both partition_bounds_equal() and
partition_bounds_copy() simpler, safer, and faster than before,
and removes explicit knowledge of the number-of-partition-indexes
rules from some other places too.
This change also makes get_hash_partition_greatest_modulus obsolete.
I left that in place in case any external code uses it, but no core
code does anymore.
Per bug #16840 from Michał Albrycht. Back-patch to v11 where the
hash partitioning code came in. (In the back branches, add the new
field at the end of PartitionBoundInfoData to minimize ABI risks.)
Discussion: https://postgr.es/m/16840-571a22976f829ad4@postgresql.org
This makes pg_verify_mbstr() function faster, by allowing more efficient
encoding-specific implementations. All the implementations included in
this commit are pretty naive, they just call the same encoding-specific
verifychar functions that were used previously, but that already gives a
performance boost because the tight character-at-a-time loop is simpler.
Reviewed-by: John Naylor
Discussion: https://www.postgresql.org/message-id/e7861509-3960-538a-9025-b75a61188e01@iki.fi
Two code paths of tablecmds.c (for relations with storage and without
storage) use the same logic to check if the move of a relation to a
new tablespace is allowed or not and to update pg_class.reltablespace
and pg_class.relfilenode.
A potential TABLESPACE clause for REINDEX, CLUSTER and VACUUM FULL needs
similar checks to make sure that nothing is moved around in illegal ways
(no mapped relations, shared relations only in pg_global, no move of
temp tables owned by other backends).
This reorganizes the existing code of ALTER TABLE so as all this logic
is controlled by two new routines that can be reused for the other
commands able to move relations across tablespaces, limiting the number
of code paths in need of the same protections. This also removes some
code that was duplicated for tables with and without storage for ALTER
TABLE.
Author: Alexey Kondratov, Michael Paquier
Discussion: https://postgr.es/m/YA+9mAMWYLXJMVPL@paquier.xyz
SPI_execute_with_receiver and SPI_cursor_parse_open_with_paramlist are
new in v14 (cf. commit 2f48ede08). Before they can get out the door,
let's change their APIs to follow the practice recently established by
SPI_prepare_extended etc: shove all optional arguments into a struct
that callers are supposed to pre-zero. The hope is to allow future
addition of more options without either API breakage or a continuing
proliferation of new SPI entry points. With that in mind, choose
slightly more generic names for them: SPI_execute_extended and
SPI_cursor_parse_open respectively.
Discussion: https://postgr.es/m/CAFj8pRCLPdDAETvR7Po7gC5y_ibkn_-bOzbeJb39WHms01194Q@mail.gmail.com
This patch essentially is cleaning up technical debt left behind
by the original implementation of plpgsql procedures, particularly
commit d92bc83c4. That patch (or more precisely, follow-on patches
fixing its worst bugs) forced us to re-plan CALL and DO statements
each time through, if we're in a non-atomic context. That wasn't
for any fundamental reason, but just because use of a saved plan
requires having a ResourceOwner to hold a reference count for the
plan, and we had no suitable resowner at hand, nor would the
available APIs support using one if we did. While it's not that
expensive to create a "plan" for CALL/DO, the cycles do add up
in repeated executions.
This patch therefore makes the following API changes:
* GetCachedPlan/ReleaseCachedPlan are modified to let the caller
specify which resowner to use to pin the plan, rather than forcing
use of CurrentResourceOwner.
* spi.c gains a "SPI_execute_plan_extended" entry point that lets
callers say which resowner to use to pin the plan. This borrows the
idea of an options struct from the recently added SPI_prepare_extended,
hopefully allowing future options to be added without more API breaks.
This supersedes SPI_execute_plan_with_paramlist (which I've marked
deprecated) as well as SPI_execute_plan_with_receiver (which is new
in v14, so I just took it out altogether).
* I also took the opportunity to remove the crude hack of letting
plpgsql reach into SPI private data structures to mark SPI plans as
"no_snapshot". It's better to treat that as an option of
SPI_prepare_extended.
Now, when running a non-atomic procedure or DO block that contains
any CALL or DO commands, plpgsql creates a ResourceOwner that
will be used to pin the plans of the CALL/DO commands. (In an
atomic context, we just use CurrentResourceOwner, as before.)
Having done this, we can just save CALL/DO plans normally,
whether or not they are used across transaction boundaries.
This seems to be good for something like 2X speedup of a CALL
of a trivial procedure with a few simple argument expressions.
By restricting the creation of an extra ResourceOwner like this,
there's essentially zero penalty in cases that can't benefit.
Pavel Stehule, with some further hacking by me
Discussion: https://postgr.es/m/CAFj8pRCLPdDAETvR7Po7gC5y_ibkn_-bOzbeJb39WHms01194Q@mail.gmail.com
This file has failed headerscheck/cpluspluscheck verification since
commit 0650ff230, as a result of referencing typedef TimestampTz
without including the appropriate header.
With this commit, SHA1 goes through the implementation provided by
OpenSSL via EVP when building the backend with it, and uses as fallback
implementation KAME which was located in pgcrypto and already shaped for
an integration with a set of init, update and final routines.
Structures and routines have been renamed to make things consistent with
the fallback implementations of MD5 and SHA2.
uuid-ossp has used for ages a shortcut with pgcrypto to fetch a copy of
SHA1 if needed. This was built depending on the build options within
./configure, so this cleans up some code and removes the build
dependency between pgcrypto and uuid-ossp.
Note that this will help with the refactoring of HMAC, as pgcrypto
offers the option to use MD5, SHA1 or SHA2, so only the second option
was missing to make that possible.
Author: Michael Paquier
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/X9HXKTgrvJvYO7Oh@paquier.xyz
Previously, pull_varnos() took the relids of a PlaceHolderVar as being
equal to the relids in its contents, but that fails to account for the
possibility that we have to postpone evaluation of the PHV due to outer
joins. This could result in a malformed plan. The known cases end up
triggering the "failed to assign all NestLoopParams to plan nodes"
sanity check in createplan.c, but other symptoms may be possible.
The right value to use is the join level we actually intend to evaluate
the PHV at. We can get that from the ph_eval_at field of the associated
PlaceHolderInfo. However, there are some places that call pull_varnos()
before the PlaceHolderInfos have been created; in that case, fall back
to the conservative assumption that the PHV will be evaluated at its
syntactic level. (In principle this might result in missing some legal
optimization, but I'm not aware of any cases where it's an issue in
practice.) Things are also a bit ticklish for calls occurring during
deconstruct_jointree(), but AFAICS the ph_eval_at fields should have
reached their final values by the time we need them.
The main problem in making this work is that pull_varnos() has no
way to get at the PlaceHolderInfos. We can fix that easily, if a
bit tediously, in HEAD by passing it the planner "root" pointer.
In the back branches that'd cause an unacceptable API/ABI break for
extensions, so leave the existing entry points alone and add new ones
with the additional parameter. (If an old entry point is called and
encounters a PHV, it'll fall back to using the syntactic level,
again possibly missing some valid optimization.)
Back-patch to v12. The computation is surely also wrong before that,
but it appears that we cannot reach a bad plan thanks to join order
restrictions imposed on the subquery that the PlaceHolderVar came from.
The error only became reachable when commit 4be058fe9 allowed trivial
subqueries to be collapsed out completely, eliminating their join order
restrictions.
Per report from Stephan Springl.
Discussion: https://postgr.es/m/171041.1610849523@sss.pgh.pa.us
Extends the FDW API to allow batching inserts into foreign tables. That
is usually much more efficient than inserting individual rows, due to
high latency for each round-trip to the foreign server.
It was possible to implement something similar in the regular FDW API,
but it was inconvenient and there were issues with reporting the number
of actually inserted rows etc. This extends the FDW API with two new
functions:
* GetForeignModifyBatchSize - allows the FDW picking optimal batch size
* ExecForeignBatchInsert - inserts a batch of rows at once
Currently, only INSERT queries support batching. Support for DELETE and
UPDATE may be added in the future.
This also implements batching for postgres_fdw. The batch size may be
specified using "batch_size" option both at the server and table level.
The initial patch version was written by me, but it was rewritten and
improved in many ways by Takayuki Tsunakawa.
Author: Takayuki Tsunakawa
Reviewed-by: Tomas Vondra, Amit Langote
Discussion: https://postgr.es/m/20200628151002.7x5laxwpgvkyiu3q@development
This continues the work done in b5913f6. All the options of those
commands are changed to use hex values rather than enums to reduce the
risk of compatibility bugs when introducing new options. Each option
set is moved into a new structure that can be extended with more
non-boolean options (this was already the case of VACUUM). The code of
REINDEX is restructured so as manual REINDEX commands go through a
single routine from utility.c, like VACUUM, to ease the allocation
handling of option parameters when a command needs to go through
multiple transactions.
This can be used as a base infrastructure for future patches related to
those commands, including reindex filtering and tablespace support.
Per discussion with people mentioned below, as well as Alvaro Herrera
and Peter Eisentraut.
Author: Michael Paquier, Justin Pryzby
Reviewed-by: Alexey Kondratov, Justin Pryzby
Discussion: https://postgr.es/m/X8riynBLwxAD9uKk@paquier.xyz
Make sure COPY FREEZE marks the pages as PD_ALL_VISIBLE and updates the
visibility map. Until now we only marked individual tuples as frozen,
but page-level flags were not updated, so the first VACUUM after the
COPY FREEZE had to rewrite the whole table.
This is a fairly old patch, and multiple people worked on it. The first
version was written by Jeff Janes, and then reworked by Pavan Deolasee
and Anastasia Lubennikova.
Author: Anastasia Lubennikova, Pavan Deolasee, Jeff Janes
Reviewed-by: Kuntal Ghosh, Jeff Janes, Tomas Vondra, Masahiko Sawada,
Andres Freund, Ibrar Ahmed, Robert Haas, Tatsuro Ishii,
Darafei Praliaskouski
Discussion: https://postgr.es/m/CABOikdN-ptGv0mZntrK2Q8OtfUuAjqaYMGmkdU1dCKFtUxVLrg@mail.gmail.com
Discussion: https://postgr.es/m/CAMkU%3D1w3osJJ2FneELhhNRLxfZitDgp9FPHee08NT2FQFmz_pQ%40mail.gmail.com
This add counters for number of sessions, the different kind of session
termination types, and timers for how much time is spent in active vs
idle in a database to pg_stat_database.
Internally this also renames the parameter "force" to disconnect. This
was the only use-case for the parameter before, so repurposing it to
this mroe narrow usecase makes things cleaner than inventing something
new.
Author: Laurenz Albe
Reviewed-By: Magnus Hagander, Soumyadeep Chakraborty, Masahiro Ikeda
Discussion: https://postgr.es/m/b07e1f9953701b90c66ed368656f2aef40cac4fb.camel@cybertec.at
Every core SLRU wraps around. With the exception of pg_notify, the wrap
point can fall in the middle of a page. Account for this in the
PagePrecedes callback specification and in SimpleLruTruncate()'s use of
said callback. Update each callback implementation to fit the new
specification. This changes SerialPagePrecedesLogically() from the
style of asyncQueuePagePrecedes() to the style of CLOGPagePrecedes().
(Whereas pg_clog and pg_serial share a key space, pg_serial is nothing
like pg_notify.) The bug fixed here has the same symptoms and user
followup steps as 592a589a04. Back-patch
to 9.5 (all supported versions).
Reviewed by Andrey Borodin and (in earlier versions) by Tom Lane.
Discussion: https://postgr.es/m/20190202083822.GC32531@gust.leadboat.com
This is like commit c98763bf51, but for REINDEX CONCURRENTLY. To wit:
this flags indicates that the current process is safe to ignore for the
purposes of waiting for other snapshots, when doing CREATE INDEX
CONCURRENTLY and REINDEX CONCURRENTLY. This helps two processes doing
either of those things not deadlock, and also avoids spurious waits.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Hamid Akhtar <hamid.akhtar@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/20201130195439.GA24598@alvherre.pgsql
When a tablespace is used in a partitioned relation (per commits
ca4103025d in pg12 for tables and 33e6c34c32 in pg11 for indexes),
it is possible to drop the tablespace, potentially causing various
problems. One such was reported in bug #16577, where a rewriting ALTER
TABLE causes a server crash.
Protect against this by using pg_shdepend to keep track of tablespaces
when used for relations that don't keep physical files; we now abort a
tablespace if we see that the tablespace is referenced from any
partitioned relations.
Backpatch this to 11, where this problem has been latent all along. We
don't try to create pg_shdepend entries for existing partitioned
indexes/tables, but any ones that are modified going forward will be
protected.
Note slight behavior change: when trying to drop a tablespace that
contains both regular tables as well as partitioned ones, you'd
previously get ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE and now you'll
get ERRCODE_DEPENDENT_OBJECTS_STILL_EXIST. Arguably, the latter is more
correct.
It is possible to add protecting pg_shdepend entries for existing
tables/indexes, by doing
ALTER TABLE ONLY some_partitioned_table SET TABLESPACE pg_default;
ALTER TABLE ONLY some_partitioned_table SET TABLESPACE original_tablespace;
for each partitioned table/index that is not in the database default
tablespace. Because these partitioned objects do not have storage, no
file needs to be actually moved, so it shouldn't take more time than
what's required to acquire locks.
This query can be used to search for such relations:
SELECT ... FROM pg_class WHERE relkind IN ('p', 'I') AND reltablespace <> 0
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/16577-881633a9f9894fd5@postgresql.org
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Remove redundant function declaration and improve header comment in
pg_iovec.h. Move the new declaration in fd.h next to a group of more
similar functions.
This commit addresses some issues with c3826f83 that moved the hex
decoding routine to src/common/:
- The decoding function lacked overflow checks, so when used for
security-related features it was an open door to out-of-bound writes if
not carefully used that could remain undetected. Like the base64
routines already in src/common/ used by SCRAM, this routine is reworked
to check for overflows by having the size of the destination buffer
passed as argument, with overflows checked before doing any writes.
- The encoding routine was missing. This is moved to src/common/ and
it gains the same overflow checks as the decoding part.
On failure, the hex routines of src/common/ issue an error as per the
discussion done to make them usable by frontend tools, but not by shared
libraries. Note that this is why ECPG is left out of this commit, and
it still includes a duplicated logic doing hex encoding and decoding.
While on it, this commit uses better variable names for the source and
destination buffers in the existing escape and base64 routines in
encode.c and it makes them more robust to overflow detection. The
previous core code issued a FATAL after doing out-of-bound writes if
going through the SQL functions, which would be enough to detect
problems when working on changes that impacted this area of the
code. Instead, an error is issued before doing an out-of-bound write.
The hex routines were being directly called for bytea conversions and
backup manifests without such sanity checks. The current calls happen
to not have any problems, but careless uses of such APIs could easily
lead to CVE-class bugs.
Author: Bruce Momjian, Michael Paquier
Reviewed-by: Sehrope Sarkuni
Discussion: https://postgr.es/m/20201231003557.GB22199@momjian.us
macOS's ranlib issued a warning about an empty pread.o file with the
previous arrangement, on systems new enough to require no replacement
functions. Let's go back to using configure's AC_REPLACE_FUNCS system
to build and include each .o in the library only if it's needed, which
requires moving the *v() functions to their own files.
Also move the _with_retry() wrapper to a more permanent home.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1283127.1610554395%40sss.pgh.pa.us
These need to be PR because they access the MyProcPort data structure,
which doesn't get copied to parallel workers. The very similar
functions inet_client_addr() and inet_client_port() are already
marked PR, but somebody missed these.
Although this is a pre-existing bug, we can't readily fix it in the back
branches since we can't force initdb. Given the small usage of these
two functions, and the even smaller likelihood that they'd get pushed to
a parallel worker anyway, it doesn't seem worth the trouble to suggest
that DBAs should fix it manually.
Masahiko Sawada
Discussion: https://postgr.es/m/CAD21AoAT4aHP0Uxq91qpD7NL009tnUYQe-b14R3MnSVOjtE71g@mail.gmail.com
Teach nbtree and heapam to cooperate in order to eagerly remove
duplicate tuples representing dead MVCC versions. This is "bottom-up
deletion". Each bottom-up deletion pass is triggered lazily in response
to a flood of versions on an nbtree leaf page. This usually involves a
"logically unchanged index" hint (these are produced by the executor
mechanism added by commit 9dc718bd).
The immediate goal of bottom-up index deletion is to avoid "unnecessary"
page splits caused entirely by version duplicates. It naturally has an
even more useful effect, though: it acts as a backstop against
accumulating an excessive number of index tuple versions for any given
_logical row_. Bottom-up index deletion complements what we might now
call "top-down index deletion": index vacuuming performed by VACUUM.
Bottom-up index deletion responds to the immediate local needs of
queries, while leaving it up to autovacuum to perform infrequent clean
sweeps of the index. The overall effect is to avoid certain
pathological performance issues related to "version churn" from UPDATEs.
The previous tableam interface used by index AMs to perform tuple
deletion (the table_compute_xid_horizon_for_tuples() function) has been
replaced with a new interface that supports certain new requirements.
Many (perhaps all) of the capabilities added to nbtree by this commit
could also be extended to other index AMs. That is left as work for a
later commit.
Extend deletion of LP_DEAD-marked index tuples in nbtree by adding logic
to consider extra index tuples (that are not LP_DEAD-marked) for
deletion in passing. This increases the number of index tuples deleted
significantly in many cases. The LP_DEAD deletion process (which is now
called "simple deletion" to clearly distinguish it from bottom-up
deletion) won't usually need to visit any extra table blocks to check
these extra tuples. We have to visit the same table blocks anyway to
generate a latestRemovedXid value (at least in the common case where the
index deletion operation's WAL record needs such a value).
Testing has shown that the "extra tuples" simple deletion enhancement
increases the number of index tuples deleted with almost any workload
that has LP_DEAD bits set in leaf pages. That is, it almost never fails
to delete at least a few extra index tuples. It helps most of all in
cases that happen to naturally have a lot of delete-safe tuples. It's
not uncommon for an individual deletion operation to end up deleting an
order of magnitude more index tuples compared to the old naive approach
(e.g., custom instrumentation of the patch shows that this happens
fairly often when the regression tests are run).
Add a further enhancement that augments simple deletion and bottom-up
deletion in indexes that make use of deduplication: Teach nbtree's
_bt_delitems_delete() function to support granular TID deletion in
posting list tuples. It is now possible to delete individual TIDs from
posting list tuples provided the TIDs have a tableam block number of a
table block that gets visited as part of the deletion process (visiting
the table block can be triggered directly or indirectly). Setting the
LP_DEAD bit of a posting list tuple is still an all-or-nothing thing,
but that matters much less now that deletion only needs to start out
with the right _general_ idea about which index tuples are deletable.
Bump XLOG_PAGE_MAGIC because xl_btree_delete changed.
No bump in BTREE_VERSION, since there are no changes to the on-disk
representation of nbtree indexes. Indexes built on PostgreSQL 12 or
PostgreSQL 13 will automatically benefit from bottom-up index deletion
(i.e. no reindexing required) following a pg_upgrade. The enhancement
to simple deletion is available with all B-Tree indexes following a
pg_upgrade, no matter what PostgreSQL version the user upgrades from.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wzm+maE3apHB8NOtmM=p-DO65j2V5GzAWCOEEuy3JZgb2g@mail.gmail.com
Add an executor aminsert() hint mechanism that informs index AMs that
the incoming index tuple (the tuple that accompanies the hint) is not
being inserted by execution of an SQL statement that logically modifies
any of the index's key columns.
The hint is received by indexes when an UPDATE takes place that does not
apply an optimization like heapam's HOT (though only for indexes where
all key columns are logically unchanged). Any index tuple that receives
the hint on insert is expected to be a duplicate of at least one
existing older version that is needed for the same logical row. Related
versions will typically be stored on the same index page, at least
within index AMs that apply the hint.
Recognizing the difference between MVCC version churn duplicates and
true logical row duplicates at the index AM level can help with cleanup
of garbage index tuples. Cleanup can intelligently target tuples that
are likely to be garbage, without wasting too many cycles on less
promising tuples/pages (index pages with little or no version churn).
This is infrastructure for an upcoming commit that will teach nbtree to
perform bottom-up index deletion. No index AM actually applies the hint
just yet.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=CEKFa74EScx_hFVshCOn6AA5T-ajFASTdzipdkLTNQQ@mail.gmail.com
This is a follow-up of the work done in commit 0650ff2303. This commit
extends log_recovery_conflict_waits so that a log message is produced
also when recovery conflict has already been resolved after deadlock_timeout
passes, i.e., when the startup process finishes waiting for recovery
conflict after deadlock_timeout. This is useful in investigating how long
recovery conflicts prevented the recovery from applying WAL.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Bertrand Drouvot
Discussion: https://postgr.es/m/9a60178c-a853-1440-2cdc-c3af916cff59@amazon.com
Similar to commit d6ad34f341, this patch optimizes
DropRelFileNodesAllBuffers() by avoiding the complete buffer pool scan and
instead find the buffers to be invalidated by doing lookups in the
BufMapping table.
This optimization helps operations where the relation files need to be
removed like Truncate, Drop, Abort of Create Table, etc.
Author: Kirk Jamison
Reviewed-by: Kyotaro Horiguchi, Takayuki Tsunakawa, and Amit Kapila
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/OSBPR01MB3207DCA7EC725FDD661B3EDAEF660@OSBPR01MB3207.jpnprd01.prod.outlook.com
The recovery path of DropRelFileNodeBuffers() is optimized so that
scanning of the whole buffer pool can be avoided when the number of
blocks to be truncated in a relation is below a certain threshold. For
such cases, we find the buffers by doing lookups in BufMapping table.
This improves the performance by more than 100 times in many cases
when several small tables (tested with 1000 relations) are truncated
and where the server is configured with a large value of shared
buffers (greater than equal to 100GB).
This optimization helps cases (a) when vacuum or autovacuum truncated off
any of the empty pages at the end of a relation, or (b) when the relation is
truncated in the same transaction in which it was created.
This commit introduces a new API smgrnblocks_cached which returns a cached
value for the number of blocks in a relation fork. This helps us to determine
the exact size of relation which is required to apply this optimization. The
exact size is required to ensure that we don't leave any buffer for the
relation being dropped as otherwise the background writer or checkpointer
can lead to a PANIC error while flushing buffers corresponding to files that
don't exist.
Author: Kirk Jamison based on ideas by Amit Kapila
Reviewed-by: Kyotaro Horiguchi, Takayuki Tsunakawa, and Amit Kapila
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/OSBPR01MB3207DCA7EC725FDD661B3EDAEF660@OSBPR01MB3207.jpnprd01.prod.outlook.com
Commit 257836a7 accidentally deleted a couple of
redundant-but-conventional "extern" keywords on function prototypes.
Put them back.
Reported-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Provide synchronous vectored file I/O routines. These map to preadv()
and pwritev(), with fallback implementations for systems that don't have
them. Also provide a wrapper pg_pwritev_with_retry() that automatically
retries on short writes.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKGJA%2Bu-220VONeoREBXJ9P3S94Y7J%2BkqCnTYmahvZJwM%3Dg%40mail.gmail.com
This commit addresses two issues:
- In pgcrypto, MD5 computation called pg_cryptohash_{init,update,final}
without checking for the result status.
- Simplify pg_checksum_raw_context to use only one variable for all the
SHA2 options available in checksum manifests.
Reported-by: Heikki Linnakangas
Discussion: https://postgr.es/m/f62f26bb-47a5-8411-46e5-4350823e06a5@iki.fi
This commit adds GUC log_recovery_conflict_waits that controls whether
a log message is produced when the startup process is waiting longer than
deadlock_timeout for recovery conflicts. This is useful in determining
if recovery conflicts prevent the recovery from applying WAL.
Note that currently a log message is produced only when recovery conflict
has not been resolved yet even after deadlock_timeout passes, i.e.,
only when the startup process is still waiting for recovery conflict
even after deadlock_timeout.
Author: Bertrand Drouvot, Masahiko Sawada
Reviewed-by: Alvaro Herrera, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/9a60178c-a853-1440-2cdc-c3af916cff59@amazon.com
The allocation of the cryptohash context data when building with OpenSSL
was happening in the memory context of the caller of
pg_cryptohash_create(), which could lead to issues with resowner cleanup
if cascading resources are cleaned up on an error. Like other
facilities using resowners, move the base allocation to TopMemoryContext
to ensure a correct cleanup on failure.
The resulting code gets simpler with this commit as the context data is
now hold by a unique opaque pointer, so as there is only one single
allocation done in TopMemoryContext.
After discussion, also change the cryptohash subroutines to return an
error if the caller provides NULL for the context data to ease error
detection on OOM.
Author: Heikki Linnakangas
Discussion: https://postgr.es/m/X9xbuEoiU3dlImfa@paquier.xyz
This GUC variable works much like idle_in_transaction_session_timeout,
in that it kills sessions that have waited too long for a new client
query. But it applies when we're not in a transaction, rather than
when we are.
Li Japin, reviewed by David Johnston and Hayato Kuroda, some
fixes by me
Discussion: https://postgr.es/m/763A0689-F189-459E-946F-F0EC4458980B@hotmail.com
Forced cache invalidation (CLOBBER_CACHE_ALWAYS) has been impractical
to use for testing in PostgreSQL because it's so slow and because it's
toggled on/off only at build time. It is helpful when hunting bugs in
any code that uses the sycache/relcache because causes cache
invalidations to be injected whenever it would be possible for an
invalidation to occur, whether or not one was really pending.
Address this by providing run-time control over cache clobber
behaviour using the new debug_invalidate_system_caches_always GUC.
Support is not compiled in at all unless assertions are enabled or
CLOBBER_CACHE_ENABLED is explicitly defined at compile time. It
defaults to 0 if compiled in, so it has negligible effect on assert
build performance by default.
When support is compiled in, test code can now set
debug_invalidate_system_caches_always=1 locally to a backend to test
specific queries, functions, extensions, etc. Or tests can toggle it
globally for a specific test case while retaining normal performance
during test setup and teardown.
For backwards compatibility with existing test harnesses and scripts,
debug_invalidate_system_caches_always defaults to 1 if
CLOBBER_CACHE_ALWAYS is defined, and to 3 if CLOBBER_CACHE_RECURSIVE
is defined.
CLOBBER_CACHE_ENABLED is now visible in pg_config_manual.h, as is the
related RECOVER_RELATION_BUILD_MEMORY setting for the relcache.
Author: Craig Ringer <craig.ringer@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/CAMsr+YF=+ctXBZj3ywmvKNUjWpxmuTuUKuv-rgbHGX5i5pLstQ@mail.gmail.com
The deadlocks that the recovery conflict on lock is involved in can
happen between hot-standby backends and the startup process.
If a backend takes an access exclusive lock on the table and which
finally triggers the deadlock, that deadlock can be detected
as expected. On the other hand, previously, if the startup process
took an access exclusive lock and which finally triggered the deadlock,
that deadlock could not be detected and could remain even after
deadlock_timeout passed. This is a bug.
The cause of this bug was that the code for handling the recovery
conflict on lock didn't take care of deadlock case at all. It assumed
that deadlocks involving the startup process and backends were able
to be detected by the deadlock detector invoked within backends.
But this assumption was incorrect. The startup process also should
have invoked the deadlock detector if necessary.
To fix this bug, this commit makes the startup process invoke
the deadlock detector if deadlock_timeout is reached while handling
the recovery conflict on lock. Specifically, in that case, the startup
process requests all the backends holding the conflicting locks to
check themselves for deadlocks.
Back-patch to v9.6. v9.5 has also this bug, but per discussion we decided
not to back-patch the fix to v9.5. Because v9.5 doesn't have some
infrastructure codes (e.g., 37c54863cf) that this bug fix patch depends on.
We can apply those codes for the back-patch, but since the next minor
version release is the final one for v9.5, it's risky to do that. If we
unexpectedly introduce new bug to v9.5 by the back-patch, there is no
chance to fix that. We determined that the back-patch to v9.5 would give
more risk than gain.
Author: Fujii Masao
Reviewed-by: Bertrand Drouvot, Masahiko Sawada, Kyotaro Horiguchi
Discussion: https://postgr.es/m/4041d6b6-cf24-a120-36fa-1294220f8243@oss.nttdata.com
Invent new RawParseModes that allow the core grammar to handle
pl/pgsql expressions and assignments directly, and thereby get rid
of a lot of hackery in pl/pgsql's parser. This moves a good deal
of knowledge about pl/pgsql into the core code: notably, we have to
invent a CoercionContext that matches pl/pgsql's (rather dubious)
historical behavior for assignment coercions. That's getting away
from the original idea of pl/pgsql as an arm's-length extension of
the core, but really we crossed that bridge a long time ago.
The main advantage of doing this is that we can now use the core
parser to generate FieldStore and/or SubscriptingRef nodes to handle
assignments to pl/pgsql variables that are records or arrays. That
fixes a number of cases that had never been implemented in pl/pgsql
assignment, such as nested records and array slicing, and it allows
pl/pgsql assignment to support the datatype-specific subscripting
behaviors introduced in commit c7aba7c14.
There are cosmetic benefits too: when a syntax error occurs in a
pl/pgsql expression, the error report no longer includes the confusing
"SELECT" keyword that used to get prefixed to the expression text.
Also, there seem to be some small speed gains.
Discussion: https://postgr.es/m/4165684.1607707277@sss.pgh.pa.us
This patch essentially allows gram.y to implement a family of related
syntax trees, rather than necessarily always parsing a list of SQL
statements. raw_parser() gains a new argument, enum RawParseMode,
to say what to do. As proof of concept, add a mode that just parses
a TypeName without any other decoration, and use that to greatly
simplify typeStringToTypeName().
In addition, invent a new SPI entry point SPI_prepare_extended() to
allow SPI users (particularly plpgsql) to get at this new functionality.
In hopes of making this the last variant of SPI_prepare(), set up its
additional arguments as a struct rather than direct arguments, and
promise that future additions to the struct can default to zero.
SPI_prepare_cursor() and SPI_prepare_params() can perhaps go away at
some point.
Discussion: https://postgr.es/m/4165684.1607707277@sss.pgh.pa.us
This patch allows PREPARE-time decoding of two-phase transactions (if the
output plugin supports this capability), in which case the transactions
are replayed at PREPARE and then committed later when COMMIT PREPARED
arrives.
Now that we decode the changes before the commit, the concurrent aborts
may cause failures when the output plugin consults catalogs (both system
and user-defined).
We detect such failures with a special sqlerrcode
ERRCODE_TRANSACTION_ROLLBACK introduced by commit 7259736a6e and stop
decoding the remaining changes. Then we rollback the changes when rollback
prepared is encountered.
Author: Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Peter Smith, Sawada Masahiko, Arseny Sher, and Dilip Kumar
Tested-by: Takamichi Osumi
Discussion:
https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ruhttps://postgr.es/m/CAMGcDxeqEpWj3fTXwqhSwBdXd2RS9jzwWscO-XbeCfso6ts3+Q@mail.gmail.com
Since at least 2001 we've used putenv() and avoided setenv(), on the
grounds that the latter was unportable and not in POSIX. However,
POSIX added it that same year, and by now the situation has reversed:
setenv() is probably more portable than putenv(), since POSIX now
treats the latter as not being a core function. And setenv() has
cleaner semantics too. So, let's reverse that old policy.
This commit adds a simple src/port/ implementation of setenv() for
any stragglers (we have one in the buildfarm, but I'd not be surprised
if that code is never used in the field). More importantly, extend
win32env.c to also support setenv(). Then, replace usages of putenv()
with setenv(), and get rid of some ad-hoc implementations of setenv()
wannabees.
Also, adjust our src/port/ implementation of unsetenv() to follow the
POSIX spec that it returns an error indicator, rather than returning
void as per the ancient BSD convention. I don't feel a need to make
all the call sites check for errors, but the portability stub ought
to match real-world practice.
Discussion: https://postgr.es/m/2065122.1609212051@sss.pgh.pa.us
IF NOT EXISTS was ignored when specified in an EXPLAIN query for CREATE
MATERIALIZED VIEW or CREATE TABLE AS. Hence, if this clause was
specified, the caller would get a failure if the relation already
exists instead of a success with a NOTICE message.
This commit makes the behavior of IF NOT EXISTS in EXPLAIN consistent
with the non-EXPLAIN'd DDL queries, preventing a failure with IF NOT
EXISTS if the relation to-be-created already exists. The skip is done
before the SELECT query used for the relation is planned or executed,
and a "dummy" plan is generated instead depending on the format used by
EXPLAIN.
Author: Bharath Rupireddy
Reviewed-by: Zhijie Hou, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACVa3oJ9O_wcGd+FtHWZds04dEKcakxphGz5POVgD4wC7Q@mail.gmail.com
This adds six methods to the output plugin API, adding support for
streaming changes of two-phase transactions at prepare time.
* begin_prepare
* filter_prepare
* prepare
* commit_prepared
* rollback_prepared
* stream_prepare
Most of this is a simple extension of the existing methods, with the
semantic difference that the transaction is not yet committed and maybe
aborted later.
Until now two-phase transactions were translated into regular transactions
on the subscriber, and the GID was not forwarded to it. None of the
two-phase commands were communicated to the subscriber.
This patch provides the infrastructure for logical decoding plugins to be
informed of two-phase commands Like PREPARE TRANSACTION, COMMIT PREPARED
and ROLLBACK PREPARED commands with the corresponding GID.
This also extends the 'test_decoding' plugin, implementing these new
methods.
This commit simply adds these new APIs and the upcoming patch to "allow
the decoding at prepare time in ReorderBuffer" will use these APIs.
Author: Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Peter Smith, Sawada Masahiko, and Dilip Kumar
Discussion:
https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ruhttps://postgr.es/m/CAMGcDxeqEpWj3fTXwqhSwBdXd2RS9jzwWscO-XbeCfso6ts3+Q@mail.gmail.com
When the postmaster sends SIGQUIT to its children, there's no real
need for all the children to log that fact; the postmaster already
made a log entry about it, so adding perhaps dozens or hundreds of
child-process log entries adds nothing of value. So, let's introduce
a new ereport level to specify "WARNING, but never send to log" and
use that for these messages.
Such a change wouldn't have been desirable before commit 7e784d1dc,
because if someone manually SIGQUIT's a backend, we *do* want to log
that. But now we can tell the difference between a signal that was
issued by the postmaster and one that was not with reasonable
certainty.
While we're here, also clear error_context_stack before ereport'ing,
to prevent error callbacks from being invoked in the signal-handler
context. This should reduce the odds of getting hung up while trying
to notify the client.
Per a suggestion from Andres Freund.
Discussion: https://postgr.es/m/20201225230331.hru3u6obyy6j53tk@alap3.anarazel.de
6df7a9698b has introduced a set of operators between ranges and multiranges.
Existing GiST indexes for ranges could easily support majority of them.
This commit adds support for new operators to the existing range GiST indexes.
New operators resides the same strategy numbers as existing ones. Appropriate
check function is determined using the subtype.
Catversion is bumped.
There is a set of *_internal() functions exposed in
include/utils/multirangetypes.h. This commit improves the signatures of these
functions in two ways.
* Add const qualifies where applicable.
* Replace multirange typecache argument with range typecache argument.
Multirange typecache was used solely to find the range typecache. At the
same time, range typecache is easier for the caller to find.
We have operators for checking if the multirange contains a range but don't
have the opposite. This commit improves completeness of the operator set by
adding two new operators: @> (anyrange,anymultirange) and
<@(anymultirange,anyrange).
Catversion is bumped.
Unrecoverable errors detected by GSSAPI encryption can't just be
reported with elog(ERROR) or elog(FATAL), because attempting to
send the error report to the client is likely to lead to infinite
recursion or loss of protocol sync. Instead make this code do what
the SSL encryption code has long done, which is to just report any
such failure to the server log (with elevel COMMERROR), then pretend
we've lost the connection by returning errno = ECONNRESET.
Along the way, fix confusion about whether message translation is done
by pg_GSS_error() or its callers (the latter should do it), and make
the backend version of that function work more like the frontend
version.
Avoid allocating the port->gss struct until it's needed; we surely
don't need to allocate it in the postmaster.
Improve logging of "connection authorized" messages with GSS enabled.
(As part of this, I back-patched the code changes from dc11f31a1.)
Make BackendStatusShmemSize() account for the GSS-related space that
will be allocated by CreateSharedBackendStatus(). This omission
could possibly cause out-of-shared-memory problems with very high
max_connections settings.
Remove arbitrary, pointless restriction that only GSS authentication
can be used on a GSS-encrypted connection.
Improve documentation; notably, document the fact that libpq now
prefers GSS encryption over SSL encryption if both are possible.
Per report from Mikael Gustavsson. Back-patch to v12 where
this code was introduced.
Discussion: https://postgr.es/m/e5b0b6ed05764324a2f3fe7acfc766d5@smhi.se
The patch needs test cases, reorganization, and cfbot testing.
Technically reverts commits 5c31afc49d..e35b2bad1a (exclusive/inclusive)
and 08db7c63f3..ccbe34139b.
Reported-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/E1ktAAG-0002V2-VB@gemulon.postgresql.org
This adds a key management system that stores (currently) two data
encryption keys of length 128, 192, or 256 bits. The data keys are
AES256 encrypted using a key encryption key, and validated via GCM
cipher mode. A command to obtain the key encryption key must be
specified at initdb time, and will be run at every database server
start. New parameters allow a file descriptor open to the terminal to
be passed. pg_upgrade support has also been added.
Discussion: https://postgr.es/m/CA+fd4k7q5o6Nc_AaX6BcYM9yqTbC6_pnH-6nSD=54Zp6NBQTCQ@mail.gmail.com
Discussion: https://postgr.es/m/20201202213814.GG20285@momjian.us
Author: Masahiko Sawada, me, Stephen Frost
If a database shutdown (smart or fast) is commanded between the time
some process decides to request a new background worker and the time
that the postmaster can launch that worker, then nothing happens
because the postmaster won't launch any bgworkers once it's exited
PM_RUN state. This is fine ... unless the requesting process is
waiting for that worker to finish (or even for it to start); in that
case the requestor is stuck, and only manual intervention will get us
to the point of being able to shut down.
To fix, cancel pending requests for workers when the postmaster sends
shutdown (SIGTERM) signals, and similarly cancel any new requests that
arrive after that point. (We can optimize things slightly by only
doing the cancellation for workers that have waiters.) To fit within
the existing bgworker APIs, the "cancel" is made to look like the
worker was started and immediately stopped, causing deregistration of
the bgworker entry. Waiting processes would have to deal with
premature worker exit anyway, so this should introduce no bugs that
weren't there before. We do have a side effect that registration
records for restartable bgworkers might disappear when theoretically
they should have remained in place; but since we're shutting down,
that shouldn't matter.
Back-patch to v10. There might be value in putting this into 9.6
as well, but the management of bgworkers is a bit different there
(notably see 8ff518699) and I'm not convinced it's worth the effort
to validate the patch for that branch.
Discussion: https://postgr.es/m/661570.1608673226@sss.pgh.pa.us
Up to now, if the DBA issued "pg_ctl stop -m immediate", the message
sent to clients was the same as for a crash-and-restart situation.
This is confusing, not least because the message claims that the
database will soon be up again, something we have no business
predicting.
Improve things so that we can generate distinct messages for the two
cases (and also recognize an ad-hoc SIGQUIT, should somebody try that).
To do that, add a field to pmsignal.c's shared memory data structure
that the postmaster sets just before broadcasting SIGQUIT to its
children. No interlocking seems to be necessary; the intervening
signal-sending and signal-receipt should sufficiently serialize accesses
to the field. Hence, this isn't any riskier than the existing usages
of pmsignal.c.
We might in future extend this idea to improve other
postmaster-to-children signal scenarios, although none of them
currently seem to be as badly overloaded as SIGQUIT.
Discussion: https://postgr.es/m/559291.1608587013@sss.pgh.pa.us
While we do allow SRFs in ORDER BY, scan/join processing should not
consider such cases - such sorts should only happen via final Sort atop
a ProjectSet. So make sure we don't try adding such sorts below Gather
Merge, just like we do for expressions that are volatile and/or not
parallel safe.
Backpatch to PostgreSQL 13, where this code was introduced as part of
the Incremental Sort patch.
Author: James Coleman
Reviewed-by: Tomas Vondra
Backpatch-through: 13
Discussion: https://postgr.es/m/CAAaqYe8cK3g5CfLC4w7bs=hC0mSksZC=H5M8LSchj5e5OxpTAg@mail.gmail.com
Discussion: https://postgr.es/m/295524.1606246314%40sss.pgh.pa.us
Commit ebb7ae839d ensured we ignore pathkeys with volatile expressions
when considering adding a sort below a Gather Merge. Turns out we need
to care about parallel safety of the pathkeys too, otherwise we might
try sorting e.g. on results of a correlated subquery (as demonstrated
by a report from Luis Roberto).
Initial investigation by Tom Lane, patch by James Coleman. Backpatch
to 13, where the code was instroduced (as part of Incremental Sort).
Reported-by: Luis Roberto
Author: James Coleman
Reviewed-by: Tomas Vondra
Backpatch-through: 13
Discussion: https://postgr.es/m/622580997.37108180.1604080457319.JavaMail.zimbra%40siscobra.com.br
Discussion: https://postgr.es/m/CAAaqYe8cK3g5CfLC4w7bs=hC0mSksZC=H5M8LSchj5e5OxpTAg@mail.gmail.com
The same logic was present for collation commands, SASLprep and
pgcrypto, so this removes some code.
Author: Michael Paquier
Reviewed-by: Stephen Frost, Heikki Linnakangas
Discussion: https://postgr.es/m/X9womIn6rne6Gud2@paquier.xyz
Multiranges are basically sorted arrays of non-overlapping ranges with
set-theoretic operations defined over them.
Since v14, each range type automatically gets a corresponding multirange
datatype. There are both manual and automatic mechanisms for naming multirange
types. Once can specify multirange type name using multirange_type_name
attribute in CREATE TYPE. Otherwise, a multirange type name is generated
automatically. If the range type name contains "range" then we change that to
"multirange". Otherwise, we add "_multirange" to the end.
Implementation of multiranges comes with a space-efficient internal
representation format, which evades extra paddings and duplicated storage of
oids. Altogether this format allows fetching a particular range by its index
in O(n).
Statistic gathering and selectivity estimation are implemented for multiranges.
For this purpose, stored multirange is approximated as union range without gaps.
This field will likely need improvements in the future.
Catversion is bumped.
Discussion: https://postgr.es/m/CALNJ-vSUpQ_Y%3DjXvTxt1VYFztaBSsWVXeF1y6gTYQ4bOiWDLgQ%40mail.gmail.com
Discussion: https://postgr.es/m/a0b8026459d1e6167933be2104a6174e7d40d0ab.camel%40j-davis.com#fe7218c83b08068bfffb0c5293eceda0
Author: Paul Jungwirth, revised by me
Reviewed-by: David Fetter, Corey Huinker, Jeff Davis, Pavel Stehule
Reviewed-by: Alvaro Herrera, Tom Lane, Isaac Morland, David G. Johnston
Reviewed-by: Zhihong Yu, Alexander Korotkov
Invent a new flag bit HASH_STRINGS to specify C-string hashing, which
was formerly the default; and add assertions insisting that exactly
one of the bits HASH_STRINGS, HASH_BLOBS, and HASH_FUNCTION be set.
This is in hopes of preventing recurrences of the type of oversight
fixed in commit a1b8aa1e4 (i.e., mistakenly omitting HASH_BLOBS).
Also, when HASH_STRINGS is specified, insist that the keysize be
more than 8 bytes. This is a heuristic, but it should catch
accidental use of HASH_STRINGS for integer or pointer keys.
(Nearly all existing use-cases set the keysize to NAMEDATALEN or
more, so there's little reason to think this restriction should
be problematic.)
Tweak hash_create() to insist that the HASH_ELEM flag be set, and
remove the defaults it had for keysize and entrysize. Since those
defaults were undocumented and basically useless, no callers
omitted HASH_ELEM anyway.
Also, remove memset's zeroing the HASHCTL parameter struct from
those callers that had one. This has never been really necessary,
and while it wasn't a bad coding convention it was confusing that
some callers did it and some did not. We might as well save a few
cycles by standardizing on "not".
Also improve the documentation for hash_create().
In passing, improve reinit.c's usage of a hash table by storing
the key as a binary Oid rather than a string; and, since that's
a temporary hash table, allocate it in CurrentMemoryContext for
neatness.
Discussion: https://postgr.es/m/590625.1607878171@sss.pgh.pa.us
