we need to be able to swallow NOTICE messages, and potentially also
ParameterStatus messages (although the latter would be a bit weird),
without exiting COPY OUT state. Fix it, and adjust the protocol documentation
to emphasize the need for this. Per off-list report from Alexander Galler.
constant ORDER/GROUP BY entries properly:
http://archives.postgresql.org/pgsql-hackers/2001-04/msg00457.php
The original solution to that was in fact no good, as demonstrated by
today's report from Martin Pitt:
http://archives.postgresql.org/pgsql-bugs/2008-01/msg00027.php
We can't use the column-number-reference format for a constant that is
a resjunk targetlist entry, a case that was unfortunately not thought of
in the original discussion. What we can do instead (which did not work
at the time, but does work in 7.3 and up) is to emit the constant with
explicit ::typename decoration, even if it otherwise wouldn't need it.
This is sufficient to keep the parser from thinking it's a column number
reference, and indeed is probably what the user must have done to get
such a thing into the querytree in the first place.
and CLUSTER) execute as the table owner rather than the calling user, using
the same privilege-switching mechanism already used for SECURITY DEFINER
functions. The purpose of this change is to ensure that user-defined
functions used in index definitions cannot acquire the privileges of a
superuser account that is performing routine maintenance. While a function
used in an index is supposed to be IMMUTABLE and thus not able to do anything
very interesting, there are several easy ways around that restriction; and
even if we could plug them all, there would remain a risk of reading sensitive
information and broadcasting it through a covert channel such as CPU usage.
To prevent bypassing this security measure, execution of SET SESSION
AUTHORIZATION and SET ROLE is now forbidden within a SECURITY DEFINER context.
Thanks to Itagaki Takahiro for reporting this vulnerability.
Security: CVE-2007-6600
are shared with Tcl, since it's their code to begin with, and the patches
have been copied from Tcl 8.5.0. Problems:
CVE-2007-4769: Inadequate check on the range of backref numbers allows
crash due to out-of-bounds read.
CVE-2007-4772: Infinite loop in regex optimizer for pattern '($|^)*'.
CVE-2007-6067: Very slow optimizer cleanup for regex with a large NFA
representation, as well as crash if we encounter an out-of-memory condition
during NFA construction.
Part of the response to CVE-2007-6067 is to put a limit on the number of
states in the NFA representation of a regex. This seems needed even though
the within-the-code problems have been corrected, since otherwise the code
could try to use very large amounts of memory for a suitably-crafted regex,
leading to potential DOS by driving the system into swap, activating a kernel
OOM killer, etc.
Although there are certainly plenty of ways to drive the system into effective
DOS with poorly-written SQL queries, these problems seem worth treating as
security issues because many applications might accept regex search patterns
from untrustworthy sources.
Thanks to Will Drewry of Google for reporting these problems. Patches by Will
Drewry and Tom Lane.
Security: CVE-2007-4769, CVE-2007-4772, CVE-2007-6067
The zero-point case is sensible so far as the data structure is concerned,
so maybe we ought to allow it sometime; but right now the textual input
routines for these types don't allow it, and it seems that not all the
functions for the types are prepared to cope.
Report and patch by Merlin Moncure.
whole table instead, to ensure that it goes away when the table is dropped.
Per bug #3723 from Sam Mason.
Backpatch as far as 7.4; AFAICT 7.3 does not have the issue, because it doesn't
have general-purpose expression indexes and so there must be at least one
column referenced by an index.
simplification gets detoasted before it is incorporated into a Const node.
Otherwise, if an immutable function were to return a TOAST pointer (an
unlikely case, but it can be made to happen), we would end up with a plan
that depends on the continued existence of the out-of-line toast datum.
eval_const_expressions simplifies this to just "WHERE false", but we have
already done pull_up_IN_clauses so the IN join will be done, or at least
planned, anyway. The trouble case comes when the sub-SELECT is itself a join
and we decide to implement the IN by unique-ifying the sub-SELECT outputs:
with no remaining reference to the output Vars in WHERE, we won't have
propagated the Vars up to the upper join point, leading to "variable not found
in subplan target lists" error. Fix by adding an extra scan of in_info_list
and forcing all Vars mentioned therein to be propagated up to the IN join
point. Per bug report from Miroslav Sulc.
no-longer-needed pages at the end of a table. We thought we could throw away
pages containing HEAPTUPLE_DEAD tuples; but this is not so, because such
tuples very likely have index entries pointing at them, and we wouldn't have
removed the index entries. The problem only emerges in a somewhat unlikely
race condition: the dead tuples have to have been inserted by a transaction
that later aborted, and this has to have happened between VACUUM's initial
scan of the page and then rechecking it for empty in count_nondeletable_pages.
But that timespan will include an index-cleaning pass, so it's not all that
hard to hit. This seems to explain a couple of previously unsolved bug
reports.
remote sessions, instead of erroring out in the middle of the operation.
This is a backpatch of a previous fix applied to CLUSTER to HEAD and 8.2, all
the way back that it is relevant to.
read from the temp file didn't match the file length reported by ftello(),
the wrong variable's value was printed, and so the message made no sense.
Clean up a couple other coding infelicities while at it.
relcache entry after having heap_close'd it. This could lead to misbehavior
if a relcache flush wiped out the cache entry meanwhile. In 8.2 there is a
very real risk of CREATE INDEX CONCURRENTLY using the wrong relid for locking
and waiting purposes. I think the bug is only cosmetic in 8.0 and 8.1,
because their transgression is limited to using RelationGetRelationName(rel)
in an ereport message immediately after heap_close, and there's no way (except
with special debugging options) for a cache flush to occur in that interval.
Not quite sure that it's cosmetic in 7.4, but seems best to patch anyway.
Found by trying to run the regression tests with CLOBBER_CACHE_ALWAYS enabled.
Maybe we should try to do that on a regular basis --- it's awfully slow,
but perhaps some fast buildfarm machine could do it once in awhile.
byte after the last full byte of the bit array, regardless of whether that
byte was part of the valid data or not. Found by buildfarm testing.
Thanks to Stefan Kaltenbrunner for nailing down the cause.
hash table is allocated in a child context of the agg node's memory
context, MemoryContextReset() will reset but *not* delete the child
context. Since ExecReScanAgg() proceeds to build a new hash table
from scratch (in a new sub-context), this results in leaking the
header for the previous memory context. Therefore, use
MemoryContextResetAndDeleteChildren() instead.
Credit: My colleague Sailesh Krishnamurthy at Truviso for isolating
the cause of the leak.
clauses in which one side or the other references both sides of the join
cannot be removed as redundant, because that expression won't have been
constrained below the join. Per report from Sergey Burladyan.
log_min_error_statement is active and there is some problem in logging the
current query string; for example, that it's too long to include in the log
message without running out of memory. This problem has existed since the
log_min_error_statement feature was introduced. No doubt the reason it
wasn't detected long ago is that 8.2 is the first release that defaults
log_min_error_statement to less than PANIC level.
Per report from Bill Moran.
when handed an invalidly-encoded pattern. The previous coding could get
into an infinite loop if pg_mb2wchar_with_len() returned a zero-length
string after we'd tested for nonempty pattern; which is exactly what it
will do if the string consists only of an incomplete multibyte character.
This led to either an out-of-memory error or a backend crash depending
on platform. Per report from Wiktor Wodecki.
been broken since forever, but was not noticed because people seldom look
at raw parse trees. AFAIK, no impact on users except that debug_print_parse
might fail; but patch it all the way back anyway. Per report from Jeff Ross.
This is a Linux kernel bug that apparently exists in every extant kernel
version: sometimes shmctl() will fail with EIDRM when EINVAL is correct.
We were assuming that EIDRM indicates a possible conflict with pre-existing
backends, and refusing to start the postmaster when this happens. Fortunately,
there does not seem to be any case where Linux can legitimately return EIDRM
(it doesn't track shmem segments in a way that would allow that), so we can
get away with just assuming that EIDRM means EINVAL on this platform.
Per reports from Michael Fuhr and Jon Lapham --- it's a bit surprising
we have not seen more reports, actually.
overruns (neither of which seem likely to be exploitable as security holes,
fortunately, since the provoker can't control the data written). One of
these is due to choosing to stomp on the output of a called function, which
is bad news in any case; make it treat the called functions' results as
read-only. Avoid some unnecessary palloc/pfree traffic too; it's not
really helpful to free small temporary objects, and again this is presuming
more than it ought to about the nature of the results of called functions.
Per report from Patrick Welche and additional code-reading by Imad.
create table foo (bar int default null default 3);
due to not thinking about the special-case handling of DEFAULT NULL.
Problem noticed while investigating bug #3396.
wrong data when dumping a bufferload that crosses a component-file boundary.
This probably has not been seen in the wild because (a) component files are
normally 1GB apiece and (b) non-block-aligned buffer usage is relatively
rare. But it's fairly easy to reproduce a problem if one reduces RELSEG_SIZE
in a test build. Kudos to Kurt Harriman for spotting the bug.
had been taught not to do that ages ago, the SSL code was helpfully bleating
anyway. Resolves some recent reports such as bug #3266; however the
underlying cause of the related bug #2829 is still unclear.
wrong thing when inlining polymorphic SQL functions, because it was using the
function's declared return type where it should have used the actual result
type of the current call. In 8.1 and 8.2 this causes obvious failures even if
you don't have assertions turned on; in 8.0 and 7.4 it would only be a problem
if the inlined expression were used as an input to a function that did
run-time type determination on its inputs. Add a regression test, since this
is evidently an under-tested area.
is in progress on the same hashtable. This seems the least invasive way to
fix the recently-recognized problem that a split could cause the scan to
visit entries twice or (with much lower probability) miss them entirely.
The only field-reported problem caused by this is the "failed to re-find
shared lock object" PANIC in COMMIT PREPARED reported by Michel Dorochevsky,
which was caused by multiply visited entries. However, it seems certain
that mdsync() is vulnerable to missing required fsync's due to missed
entries, and I am fearful that RelationCacheInitializePhase2() might be at
risk as well. Because of that and the generalized hazard presented by this
bug, back-patch all the supported branches.
Along the way, fix pg_prepared_statement() and pg_cursor() to not assume
that the hashtables they are examining will stay static between calls.
This is risky regardless of the newly noted dynahash problem, because
hash_seq_search() has never promised to cope with deletion of table entries
other than the just-returned one. There may be no bug here because the only
supported way to call these functions is via ExecMakeTableFunctionResult()
which will cycle them to completion before doing anything very interesting,
but it seems best to get rid of the assumption. This affects 8.2 and HEAD
only, since those functions weren't there earlier.
This is needed to allow a security-definer function to set a truly secure
value of search_path. Without it, a malicious user can use temporary objects
to execute code with the privileges of the security-definer function. Even
pushing the temp schema to the back of the search path is not quite good
enough, because a function or operator at the back of the path might still
capture control from one nearer the front due to having a more exact datatype
match. Hence, disable searching the temp schema altogether for functions and
operators.
Security: CVE-2007-2138
failed (due to lock conflicts or out-of-space). We might have already
extended the index's filesystem EOF before failing, causing the EOF to be
beyond what the metapage says is the last used page. Hence the invariant
maintained by the code needs to be "EOF is at or beyond last used page",
not "EOF is exactly the last used page". Problem was created by my patch
of 2006-11-19 that attempted to repair bug #2737. Since that was
back-patched to 7.4, this needs to be as well. Per report and test case
from Vlastimil Krejcir.
did not expect that a DEAD tuple could follow a RECENTLY_DEAD tuple in an
update chain, but because the OldestXmin rule for determining deadness is a
simplification of reality, it is possible for this situation to occur
(implying that the RECENTLY_DEAD tuple is in fact dead to all observers,
but this patch does not attempt to exploit that). The code would follow a
chain forward all the way, but then stop before a DEAD tuple when backing
up, meaning that not all of the chain got moved. This could lead to copying
the chain multiple times (resulting in duplicate copies of the live tuple at
its end), or leaving dangling index entries behind (which, aside from
generating warnings from later vacuums, creates a risk of wrong query
results or bogus duplicate-key errors once the heap slot the index entry
points to is repopulated).
The fix is to recheck HeapTupleSatisfiesVacuum while following a chain
forward, and to stop if a DEAD tuple is reached. Each contiguous group
of RECENTLY_DEAD tuples will therefore be copied as a separate chain.
The patch also adds a couple of extra sanity checks to verify correct
behavior.
Per report and test case from Pavan Deolasee.
check_sql_fn_retval allows binary-compatibility cases, the expression
extracted from an inline-able SQL function might have a type that is only
binary-compatible with the declared function result type. To avoid possibly
changing the semantics of the expression, we should insert a RelabelType node
in such cases. This has only been shown to have bad consequences in recent
8.1 and up releases, but I suspect there may be failure cases in the older
branches too, so patch it all the way back. Per bug #3116 from Greg Mullane.
Along the way, fix an omission in eval_const_expressions_mutator: it failed
to copy the relabelformat field when processing a RelabelType. No known
observable failures from this, but it definitely isn't intended behavior.
likely that anyone wanting to run the regression tests in the future will
have up-to-date system timezone files, so this is more likely to work than
the old contents.
portals using PORTAL_UTIL_SELECT strategy. This is currently significant only
for FETCH queries, which are supposed to include a count in the tag. Seems
it's been broken since 7.4, but nobody noticed before Knut Lehre.
get away with not (re)initializing a local variable if the variable is marked
"isconst" and not "isnull". Unfortunately it makes this decision after having
already freed the old value, meaning that something like
for i in 1..10 loop
declare c constant text := 'hi there';
leads to subsequent accesses to freed memory, and hence probably crashes.
(In particular, this is why Asif Ali Rehman's bug leads to crash and not
just an unexpectedly-NULL value for SQLERRM: SQLERRM is marked CONSTANT
and so triggers this error.)
The whole thing seems wrong on its face anyway: CONSTANT means that you can't
change the variable inside the block, not that the initializer expression is
guaranteed not to change value across successive block entries. Hence,
remove the "optimization" instead of trying to fix it.
DECLARE section needs to know about it. Formerly, everyplace besides DECLARE
that created variables needed to do "plpgsql_add_initdatums(NULL)" to prevent
those variables from being sucked up as part of a subsequent DECLARE block.
This is obviously error-prone, and in fact the SQLSTATE/SQLERRM patch had
failed to do it for those two variables, leading to the bug recently exhibited
by Asif Ali Rehman: a DECLARE within an exception handler tried to reinitialize
SQLERRM.
Although the SQLSTATE/SQLERRM patch isn't in any pre-8.1 branches, and so
I can't point to a demonstrable failure there, it seems wise to back-patch
this into the older branches anyway, just to keep the logic similar to HEAD.
thought that it didn't have to reposition the underlying tuplestore if the
portal is atEnd. But this is not so, because tuplestores have separate read
and write cursors ... and the read cursor hasn't moved from the start.
This mistake explains bug #2970 from William Zhang.
Note: the coding here is pretty inefficient, but given that no one has noticed
this bug until now, I'd say hardly anyone uses the case where the cursor has
been advanced before being persisted. So maybe it's not worth worrying about.
we should check that the function code returns the claimed result datatype
every time we parse the function for execution. Formerly, for simple
scalar result types we assumed the creation-time check was sufficient, but
this fails if the function selects from a table that's been redefined since
then, and even more obviously fails if check_function_bodies had been OFF.
This is a significant security hole: not only can one trivially crash the
backend, but with appropriate misuse of pass-by-reference datatypes it is
possible to read out arbitrary locations in the server process's memory,
which could allow retrieving database content the user should not be able
to see. Our thanks to Jeff Trout for the initial report.
Security: CVE-2007-0555
exactly at the point where we need to insert a new item, the calculation used
the wrong size for the "high key" of the new left page. This could lead to
choosing an unworkable split, resulting in "PANIC: failed to add item to the
left sibling" (or "right sibling") failure. Although this bug has been there
a long time, it's very difficult to trigger a failure before 8.2, since there
was generally a lot of free space on both sides of a chosen split. In 8.2,
where the user-selected fill factor determines how much free space the code
tries to leave, an unworkable split is much more likely. Report by Joe
Conway, diagnosis and fix by Heikki Linnakangas.
page about the maximum UTF8 sequence length we support (4 bytes since 8.1,
3 before that). pg_utf2wchar_with_len never got updated to support 4-byte
characters at all, and in any case had a buffer-overrun risk in that it
could produce multiple pg_wchars from what mblen claims to be just one UTF8
character. The only reason we don't have a major security hole is that most
callers allocate worst-case output buffers; the sole exception in released
versions appears to be pre-8.2 iwchareq() (ie, ILIKE), which can be crashed
due to zeroing out its return address --- but AFAICS that can't be exploited
for anything more than a crash, due to inability to control what gets written
there. Per report from James Russell and Michael Fuhr.
Pre-8.1 the risk is much less, but I still think pg_utf2wchar_with_len's
behavior given an incomplete final character risks buffer overrun, so
back-patch that logic change anyway.
This patch also makes sure that UTF8 sequences exceeding the supported
length (whichever it is) are consistently treated as error cases, rather
than being treated like a valid shorter sequence in some places.
involving unions of types having typmods. Variants of the failure are known
to occur in 8.1 and up; not sure if it's possible in 8.0 and 7.4, but since
the code exists that far back, I'll just patch 'em all. Per report from
Brian Hurt.
form '^(foo)$'. Before, these could never be optimized into indexscans.
The recent changes to make psql and pg_dump generate such patterns (for \d
commands and -t and related switches, respectively) therefore represented
a big performance hit for people with large pg_class catalogs, as seen in
recent gripe from Erik Jones. While at it, be more paranoid about
case-sensitivity checking in multibyte encodings, and fix some other
corner cases in which a regex might be interpreted too liberally.
ps_TupFromTlist in plan nodes that make use of it. This was being done
correctly in join nodes and Result nodes but not in any relation-scan nodes.
Bug would lead to bogus results if a set-returning function appeared in the
targetlist of a subquery that could be rescanned after partial execution,
for example a subquery within EXISTS(). Bug has been around forever :-(
... surprising it wasn't reported before.
immutable, because their results depend on lc_numeric; this is a longstanding
oversight. We cannot force initdb for this in the back branches, but we can
at least provide correct catalog entries for future installations.
(in particular, causing the ReadyForQuery message to be eaten) before
returning from do_copy. The only known consequence of failing to do so is
that get_prompt might show a wrong result for the %x transaction status
escape, as reported by Bernd Helmle; but it's possible there are other issues.
Back-patch as far as 7.4, the oldest version supporting %x.
cause any serious harm in normal cases, but if you have gcc buffer overrun
checking turned on, that will notice. Found by Jack Orenstein. Problem
was already fixed in CVS HEAD.
preference for filling pages out-of-order tends to confuse the sanity checks
in md.c, as per report from Balazs Nagy in bug #2737. The fix is to ensure
that the smgr-level code always has the same idea of the logical EOF as the
hash index code does, by using ReadBuffer(P_NEW) where we are adding a single
page to the end of the index, and using smgrextend() to reserve a large batch
of pages when creating a new splitpoint. The patch is a bit ugly because it
avoids making any changes in md.c, which seems the most prudent approach for a
backpatchable beta-period fix. After 8.3 development opens, I'll take a look
at a cleaner but more invasive patch, in particular getting rid of the now
unnecessary hack to allow reading beyond EOF in mdread().
Backpatch as far as 7.4. The bug likely exists in 7.3 as well, but because
of the magnitude of the 7.3-to-7.4 changes in hash, the later-version patch
doesn't even begin to apply. Given the other known bugs in the 7.3-era hash
code, it does not seem worth trying to develop a separate patch for 7.3.
sub-arrays. Per discussion, if all inputs are empty arrays then result
must be an empty array too, whereas a mix of empty and nonempty arrays
should (and already did) draw an error. In the back branches, the
construct was strict: any NULL input immediately yielded a NULL output;
so I left that behavior alone. HEAD was simply ignoring NULL sub-arrays,
which doesn't seem very sensible. For lack of a better idea it now
treats NULL sub-arrays the same as empty ones.
_bt_pagedel to recover from the failure: just search the whole parent level
if searching to the right fails. This does nothing for the underlying problem
that index keys became out-of-order in the grandparent level. However, we
believe that there is no other consequence worse than slightly inefficient
searching, so this narrow patch seems like the safest solution for the back
branches.
sin_port in the returned IP address struct when servname is NULL. This has
been observed to cause failure to bind the stats collection socket, and
could perhaps cause other issues too. Per reports from Brad Nicholson
and Chris Browne.
I introduced in 7.4.1 :-(. It's correct to allow unknown to be coerced to
ANY or ANYELEMENT, since it's a real-enough data type, but it most certainly
isn't an array datatype. This can cause a backend crash but AFAICT is not
exploitable as a security hole. Per report from Michael Fuhr.
Note: as fixed in HEAD, this changes a constant in the pg_stats view,
resulting in a change in the expected regression outputs. The back-branch
patches have been hacked to avoid that, so that pre-existing installations
won't start failing their regression tests.
attislocal = true, since they are not really inherited but merely copied
from the original table. I'm not sure if there are any cases where it makes
a real difference given the existing uses of the flag, but wrong is wrong.
This was fixed in passing in HEAD by the LIKE INCLUDING CONSTRAINTS patch,
but never back-patched.
Formerly they'd emit '^foo|bar$' which is wrong because the anchors are
parsed as part of the alternatives; must emit '^(foo|bar)$' to get expected
behavior. Same as bug found previously in similar_escape(). Already fixed
in HEAD, this is just back-porting the part of that patch that was a bug fix.
tried a variant file from resultmap and it didn't match. This is already done
in HEAD's C-code version, and is needed because OpenBSD has recently migrated
to a more standard handling of float underflow --- see buildfarm results
from emu.
quote chars inside quote marks, should emit one quote *and stay in inquotes
mode*. No doubt the lack of reports of this have something to do with the
poor documentation of the feature ...
overlapping possible matches for the separator string, such as
string_to_array('123xx456xxx789', 'xx').
Also, revise the logic of replace(), split_part(), and string_to_array()
to avoid O(N^2) work from redundant searches and conversions to pg_wchar
format when there are N matches to the separator string.
Backpatched the full patch as far as 8.0. 7.4 also has the bug, but the
code has diverged a lot, so I just went for a quick-and-dirty fix of the
bug itself in that branch.
and standard_conforming_strings. The encoding changes are needed for proper
escaping in multibyte encodings, as per the SQL-injection vulnerabilities
noted in CVE-2006-2313 and CVE-2006-2314. Concurrent fixes are being applied
to the server to ensure that it rejects queries that may have been corrupted
by attempted SQL injection, but this merely guarantees that unpatched clients
will fail rather than allow injection. An actual fix requires changing the
client-side code. While at it we have also fixed these routines to understand
about standard_conforming_strings, so that the upcoming changeover to SQL-spec
string syntax can be somewhat transparent to client code.
Since the existing API of PQescapeString and PQescapeBytea provides no way to
inform them which settings are in use, these functions are now deprecated in
favor of new functions PQescapeStringConn and PQescapeByteaConn. The new
functions take the PGconn to which the string will be sent as an additional
parameter, and look inside the connection structure to determine what to do.
So as to provide some functionality for clients using the old functions,
libpq stores the latest encoding and standard_conforming_strings values
received from the backend in static variables, and the old functions consult
these variables. This will work reliably in clients using only one Postgres
connection at a time, or even multiple connections if they all use the same
encoding and string syntax settings; which should cover many practical
scenarios.
Clients that use homebrew escaping methods, such as PHP's addslashes()
function or even hardwired regexp substitution, will require extra effort
to fix :-(. It is strongly recommended that such code be replaced by use of
PQescapeStringConn/PQescapeByteaConn if at all feasible.
parser will allow "\'" to be used to represent a literal quote mark. The
"\'" representation has been deprecated for some time in favor of the
SQL-standard representation "''" (two single quote marks), but it has been
used often enough that just disallowing it immediately won't do. Hence
backslash_quote allows the settings "on", "off", and "safe_encoding",
the last meaning to allow "\'" only if client_encoding is a valid server
encoding. That is now the default, and the reason is that in encodings
such as SJIS that allow 0x5c (ASCII backslash) to be the last byte of a
multibyte character, accepting "\'" allows SQL-injection attacks as per
CVE-2006-2314 (further details will be published after release). The
"on" setting is available for backward compatibility, but it must not be
used with clients that are exposed to untrusted input.
Thanks to Akio Ishida and Yasuo Ohgaki for identifying this security issue.
characters in all cases. Formerly we mostly just threw warnings for invalid
input, and failed to detect it at all if no encoding conversion was required.
The tighter check is needed to defend against SQL-injection attacks as per
CVE-2006-2313 (further details will be published after release). Embedded
zero (null) bytes will be rejected as well. The checks are applied during
input to the backend (receipt from client or COPY IN), so it no longer seems
necessary to check in textin() and related routines; any string arriving at
those functions will already have been validated. Conversion failure
reporting (for characters with no equivalent in the destination encoding)
has been cleaned up and made consistent while at it.
Also, fix a few longstanding errors in little-used encoding conversion
routines: win1251_to_iso, win866_to_iso, euc_tw_to_big5, euc_tw_to_mic,
mic_to_euc_tw were all broken to varying extents.
Patches by Tatsuo Ishii and Tom Lane. Thanks to Akio Ishida and Yasuo Ohgaki
for identifying the security issues.
a multiple (OR'ed) indexscan. It was checking for duplicate
tuple->t_data->t_ctid, when what it should be checking is tuple->t_self.
The trouble situation occurs when a live tuple has t_ctid not pointing to
itself, which can happen if an attempted UPDATE was rolled back. After a
VACUUM, an unrelated tuple could be installed where the failed update tuple
was, leading to one live tuple's t_ctid pointing to an unrelated tuple.
If one of these tuples is fetched by an earlier OR'ed indexscan and the other
by a later indexscan, nodeIndexscan.c would incorrectly ignore the second
tuple. The bug exists in all 7.4.* and 8.0.* versions, but not in earlier
or later branches because this code was only used in those releases. Per
trouble report from Rafael Martinez Guerrero.
alternatives ("|" symbol). The original coding allowed the added ^ and $
constraints to be absorbed into the first and last alternatives, producing
a pattern that would match more than it should. Per report from Eric Noriega.
I also changed the pattern to add an ARE director ("***:"), ensuring that
SIMILAR TO patterns do not change behavior if regex_flavor is changed. This
is necessary to make the non-capturing parentheses work, and seems like a
good idea on general principles.
Back-patched as far as 7.4. 7.3 also has the bug, but a fix seems impractical
because that version's regex engine doesn't have non-capturing parens.
passed extend = true whenever we are reading a page we intend to reinitialize
completely, even if we think the page "should exist". This is because it
might indeed not exist, if the relation got truncated sometime after the
current xlog record was made and before the crash we're trying to recover
from. These two thinkos appear to explain both of the old bug reports
discussed here:
http://archives.postgresql.org/pgsql-hackers/2005-05/msg01369.php
byte-swapping on the port number which causes the call to fail on Intel
Macs.
This patch uses htons() instead of htonl() and fixes this bug.
Ashley Clark
in leaking memory when invoking a PL/Python procedure that raises an
exception. Unfortunately this still leaks memory, but at least the
largest leak has been plugged.
This patch also fixes a reference counting mistake in PLy_modify_tuple()
for 8.0, 8.1 and HEAD: we don't actually own a reference to `platt', so
we shouldn't Py_DECREF() it.
to try to create a log segment file concurrently, but the code erroneously
specified O_EXCL to open(), resulting in a needless failure. Before 7.4,
it was even a PANIC condition :-(. Correct code is actually simpler than
what we had, because we can just say O_CREAT to start with and not need a
second open() call. I believe this accounts for several recent reports of
hard-to-reproduce "could not create file ...: File exists" errors in both
pg_clog and pg_subtrans.
our own command (or more generally, xmin = our xact and cmin >= current
command ID) should not be seen as good. Else we may try to update rows
we already updated. This error was inserted last August while fixing the
even bigger problem that the old coding wouldn't see *any* tuples inserted
by our own transaction as good. Per report from Euler Taveira de Oliveira.
operator names. This is needed when dumping operator definitions that have
COMMUTATOR (or similar) links to operators in other schemas.
Apparently Daniel Whitter is the first person ever to try this :-(
See:
Subject: [HACKERS] bugs with certain Asian multibyte charsets
From: Tatsuo Ishii <ishii@sraoss.co.jp>
To: pgsql-hackers@postgresql.org
Date: Sat, 24 Dec 2005 18:25:33 +0900 (JST)
for more details.
equal: if strcoll claims two strings are equal, check it with strcmp, and
sort according to strcmp if not identical. This fixes inconsistent
behavior under glibc's hu_HU locale, and probably under some other locales
as well. Also, take advantage of the now-well-defined behavior to speed up
texteq, textne, bpchareq, bpcharne: they may as well just do a bitwise
comparison and not bother with strcoll at all.
NOTE: affected databases may need to REINDEX indexes on text columns to be
sure they are self-consistent.
messages, when client attempts to execute these outside a transaction (start
one) or in a failed transaction (reject message, except for COMMIT/ROLLBACK
statements which we can handle). Per report from Francisco Figueiredo Jr.
clauses even if it's an outer join. This is a corner case since such
clauses could only arise from weird OUTER JOIN ON conditions, but worth
fixing. Per example from Ron at cheapcomplexdevices.com.
recursed twice on its first argument, leading to exponential time spent
on a deep nest of COALESCEs ... such as a deeply nested FULL JOIN would
produce. Per report from Matt Carter.
anything but transaction-exiting commands (ROLLBACK etc). We already rejected
Parse and Execute in such cases, so there seems little point in allowing Bind.
This prevents at least an Assert failure, and probably worse things, since
there's a lot of infrastructure that doesn't work when not in a live
transaction. We can also simplify the Bind logic a bit by rejecting messages
with a nonzero number of parameters, instead of the former kluge to silently
substitute NULL for each parameter. Per bug #2033 from Joel Stevenson.
very narrow window in which SimpleLruReadPage or SimpleLruWritePage could
think that I/O was needed when it wasn't (and indeed the buffer had already
been assigned to another page). This would result in an Assert failure if
Asserts were enabled, and probably in silent data corruption if not.
Reported independently by Jim Nasby and Robert Creager.
I intend a more extensive fix when 8.2 development starts, but this is a
reasonably low-impact patch for the existing branches.
for an outer join; symptom is bogus error "RIGHT JOIN is only supported with
merge-joinable join conditions". Problem was that select_mergejoin_clauses
did its tests in the wrong order. We need to force left join not right join
for a merge join when there are non-mergeable join clauses; but the test for
this only accounted for mergejoinability of the clause operator, and not
whether the left and right Vars were of the proper relations. Per report
from Jean-Pierre Pelletier.
they occur inside error processing. This is a back-port of a logic
change already present in 8.0. Partial fix for bug#1976 --- doesn't
cure the wrong-encoding problem, but at least stops it from causing
unintended ERRORs.
the wrong buffer dirty when trying to kill a dead index entry that's on
a page after the one it started on. No risk of data corruption, just
inefficiency, but still a bug.
only the inner-side relation would be considered as potential equijoin clauses,
which is wrong because the condition doesn't necessarily hold above the point
of the outer join. Per test case from Kevin Grittner (bug#1916).
In several places PL/Python was calling PyObject_Str() and then
PyString_AsString() without checking if the former had returned
NULL to indicate an error. PyString_AsString() doesn't expect a
NULL argument, so passing one causes a segmentation fault. This
patch adds checks for NULL and raises errors via PLy_elog(), which
prints details of the underlying Python exception. The patch also
adds regression tests for these checks. All tests pass on my
Solaris 9 box running HEAD and Python 2.4.1.
their OID parameter. It was possible to crash the backend with
select array_in('{123}',0,0); because that would bypass the needed step
of initializing the workspace. These seem to be the only two places
with a problem, though (record_in and record_recv don't have the issue,
and the other array functions aren't depending on user-supplied input).
Back-patch as far as 7.4; 7.3 does not have the bug.
max_files_per_process. Going further than that is just a waste of
cycles, and it seems that current Cygwin does not cope gracefully
with deliberately running the system out of FDs. Per Andrew Dunstan.
checked that the pointer is actually word-aligned. Casting a non-aligned
pointer to int32* is technically illegal per the C spec, and some recent
versions of gcc actually generate bad code for the memset() when given
such a pointer. Per report from Andrew Morrow.
port number, and use a default value for it that is dependent on the
configuration-time DEF_PGPORT. Should make the world safe for running
parallel 'make check' in different branches. Back-patch as far as 7.4
so that this actually is useful.
