some of the bugs exposed thereby. The remaining 'might be used uninitialized'
warnings look like live bugs, but I am not familiar enough with Perl/C hacking
to tell how to fix them.
We don't really want to start a new SPI connection, just keep using the old
one; otherwise we have memory management problems as illustrated by
John Kennedy's bug report of today. This requires a bit of a hack to
ensure the SPI stack state is properly restored, but then again what we
were doing before was a hack too, strictly speaking. Add a regression
test to cover this case.
1. Two minor cleanups:
- We don't need to call hv_exists+hv_fetch; we should just check the
return value of hv_fetch.
- newSVpv("undef",0) is the string "undef", not a real undef.
2. This should fix the bug Andrew Dunstan described in a recent -hackers
post. It replaces three bogus "eval_pv(key, 0)" calls with newSVpv,
and eliminates another redundant hv_exists+hv_fetch pair.
3. plperl_build_tuple_argument builds up a string of Perl code to create
a hash representing the tuple. This patch creates the hash directly.
4. Another minor cleanup: replace a couple of av_store()s with av_push.
5. Analogous to #3 for plperl_trigger_build_args. This patch removes the
static sv_add_tuple_value function, which does much the same as two
other utility functions defined later, and merges the functionality
into plperl_hash_from_tuple.
I have tested the patches to the best of my limited ability, but I would
appreciate it very much if someone else could review and test them too.
(Thanks to Andrew and David Fetter for their help with some testing.)
Abhijit Menon-Sen
argument, leading to label matching failures at run-time. Per report from
Patrick Fiche. Also, fix it so that an unrecognized label argument draws
a more useful error message than 'syntax error'.
-L spec rather than assuming libpython is in the standard search path
(this returns to the way 7.4 did it). But check the distutils output
to see if it looks like Python has built a shared library, and if so
link with that instead of the probably-not-shared library found in
configdir.
- replace some function signatures of the form "some_type foo()" with
"some_type foo(void)"
- replace a few instances of a literal 0 being used as a NULL pointer;
there are more instances of this in the code, but I just fixed a few
- in src/backend/utils/mb/wstrncmp.c, replace K&R style function
declarations with ANSI style, remove use of 'register' keyword
- remove an "extern" modifier that was applied to a function definition
(rather than a declaration)
to unreserved keyword, use ereport not elog, assign a separate error code
for 'could not obtain lock' so that applications will be able to detect
that case cleanly.
as per recent discussions. Invent SubTransactionIds that are managed like
CommandIds (ie, counter is reset at start of each top transaction), and
use these instead of TransactionIds to keep track of subtransaction status
in those modules that need it. This means that a subtransaction does not
need an XID unless it actually inserts/modifies rows in the database.
Accordingly, don't assign it an XID nor take a lock on the XID until it
tries to do that. This saves a lot of overhead for subtransactions that
are only used for error recovery (eg plpgsql exceptions). Also, arrange
to release a subtransaction's XID lock as soon as the subtransaction
exits, in both the commit and abort cases. This avoids holding many
unique locks after a long series of subtransactions. The price is some
additional overhead in XactLockTableWait, but that seems acceptable.
Finally, restructure the state machine in xact.c to have a more orthogonal
set of states for subtransactions.
mode see a fresh snapshot for each command in the function, rather than
using the latest interactive command's snapshot. Also, suppress fresh
snapshots as well as CommandCounterIncrement inside STABLE and IMMUTABLE
functions, instead using the snapshot taken for the most closely nested
regular query. (This behavior is only sane for read-only functions, so
the patch also enforces that such functions contain only SELECT commands.)
As per my proposal of 6-Sep-2004; I note that I floated essentially the
same proposal on 19-Jun-2002, but that discussion tailed off without any
action. Since 8.0 seems like the right place to be taking possibly
nontrivial backwards compatibility hits, let's get it done now.
executed. Previously, the DECLARE would succeed but subsequent FETCHes
would fail since the parameter values supplied to DECLARE were not
propagated to the portal created for the cursor.
In support of this, add type Oids to ParamListInfo entries, which seems
like a good idea anyway since code that extracts a value can double-check
that it got the type of value it was expecting.
Oliver Jowett, with minor editorialization by Tom Lane.
number of active subtransaction XIDs in each backend's PGPROC entry,
and use this to avoid expensive probes into pg_subtrans during
TransactionIdIsInProgress. Extend EOXactCallback API to allow add-on
modules to get control at subxact start/end. (This is deliberately
not compatible with the former API, since any uses of that API probably
need manual review anyway.) Add basic reference documentation for
SAVEPOINT and related commands. Minor other cleanups to check off some
of the open issues for subtransactions.
Alvaro Herrera and Tom Lane.
more nearly Oracle-equivalent. Allow matching by category as well as
specific error code. Document the set of available condition names
(or more accurately, synchronize it with the existing documentation). In
passing, update errcodes.sgml to include codes added during 7.5 development.
Create a shared function to convert a SPI error code into a string
(replacing near-duplicate code in several PLs), and use it anywhere
that a SPI function call error is reported.
There are still some things that need refinement; in particular I fear
that the recognized set of error condition names probably has little in
common with what Oracle recognizes. But it's a start.
possible to trap an error inside a function rather than letting it
propagate out to PostgresMain. You still have to use AbortCurrentTransaction
to clean up, but at least the error handling itself will cooperate.
* perl_useshrplib gets set to "yes" and not to "true". I assume it's set
to "true" on unix, so I left both.
* Need to translate backslashes into slashes
* The linker config coming out of perl was for MSVC and not for mingw
Magnus Hagander
currently unapplied regarding spi_internal.c, makes some additional
fixes relating to return types, and also contains the fix for
preventing the use of insecure versions of Safe.pm.
There is one remaing return case that does not appear to work, namely
return of a composite directly in a select, i.e. if foo returns some
composite type, 'select * from foo()' works but 'select foo()' doesn't.
We will either fix that or document it as a limitation.
The function plperl_func_handler is a mess - I will try to get it
cleaned up (and split up) in a subsequent patch, time permitting.
Also, reiterating previous advice - this changes slightly the API for
spi_exec_query - the returned object has either 2 or 3 members: 'status'
(string) and 'proceesed' (int,- number of rows) and, if rows are
returned, 'rows' (array of tuple hashes).
Andrew Dunstan
FOR loops are giving weird syntax errors. Restructure parsing of FOR
loops so that the integer-loop-vs-query-loop decision is driven off
the presence of '..' between IN and LOOP, rather than the presence
of a matching record/row variable name. Hopefully this will make the
behavior a bit more transparent.
plperlNG. Review and minor cleanup/improvements by Joe Conway.
Summary of new functionality:
- Shared data space and namespace. There is a new global variable %_SHARED
that functions can use to store and save data between invocations of a
function, or between different functions. Also, all trusted plperl function
now share a common Safe container (this is an optimization, also), which
they can use for storing non-lexical variables, functions, etc.
- Triggers are now supported
- Records can now be returned (as a hash reference)
- Sets of records can now be returned (as a reference to an array of hash
references).
- New function spi_exec_query() provided for performing db functions or
getting data from db.
- Optimization for counting hash keys (Abhijit Menon-Sen)
- Allow return of 'record' and 'setof record'
As a side effect, cause subscripts in INSERT targetlists to do something
more or less sensible; previously we evaluated such subscripts and then
effectively ignored them. Another side effect is that UPDATE-ing an
element or slice of an array value that is NULL now produces a non-null
result, namely an array containing just the assigned-to positions.
of a composite type to get that type's OID as their second parameter,
in place of typelem which is useless. The actual changes are mostly
centralized in getTypeInputInfo and siblings, but I had to fix a few
places that were fetching pg_type.typelem for themselves instead of
using the lsyscache.c routines. Also, I renamed all the related variables
from 'typelem' to 'typioparam' to discourage people from assuming that
they necessarily contain array element types.
into SQL expressions. At present this only works usefully for variables
of named rowtypes, not RECORD variables, since the SQL parser can't infer
anything about datatypes from a RECORD Param. Still, it's a step forward.
scalar and composite (rowtype) cases a little better. This commit is
just a code-beautification operation and shouldn't make any real
difference in behavior, but it's an important preliminary step for
trying to improve plgsql's handling of rowtypes.
