Pay attention to the attisdropped field and skip over TupleDesc fields
that have it set. Not a real problem until we get table returning
functions, but it's the right thing to do anyway.
Jan Urbański
If the function using yield to return rows fails halfway, the iterator
stays open and subsequent calls to the function will resume reading
from it. The fix is to unref the iterator and set it to NULL if there
has been an error.
Jan Urbański
We can get the length of a compressed or out-of-line datum without actually
detoasting it. If the lengths of two strings are unequal, we can then
conclude they are unequal without detoasting. That saves considerable work
in an admittedly less-common case, without costing anything much when the
optimization doesn't apply.
Noah Misch
Two separate hash tables are used for regular procedures and for
trigger procedures, since the way trigger procedures work is quite
different from normal stored procedures. Change the signatures of
PLy_procedure_{get,create} to accept the function OID and a Boolean
flag indicating whether it's a trigger. This should make implementing
a PL/Python validator easier.
Using HTABs instead of Python dictionaries makes error recovery
easier, and allows for procedures to be cached based on their OIDs,
not their names. It also allows getting rid of the PyCObject field
that used to hold a pointer to PLyProcedure, since PyCObjects are
deprecated in Python 2.7 and replaced by Capsules in Python 3.
Jan Urbański
If the slice to be assigned to was before the existing array lower bound
(requiring at least one null element to spring into existence to fill the
gap), the code miscalculated how many entries needed to be copied from
the old array's null bitmap. This could result in trashing the array's
data area (as seen in bug #5840 from Karsten Loesing), or worse.
This has been broken since we first allowed the behavior of assigning to
non-adjacent slices, in 8.2. Back-patch to all affected versions.
Otherwise WAL recovery will replay the un-flushed WAL after walreceiver has
exited, which can lead to a non-recoverable standby if the system crashes hard
at that point.
This closes a race condition where if a tablespace was created
after the enumeration happened but before the do_pg_start_backup()
was called, the backup would be incomplete. Now that it's done
while we are in backup mode, WAL replay will recreate it during
restore.
Noted by Heikki.
backend, as far as the postmaster shutdown logic is concerned. That means,
fast shutdown will wait for WAL sender processes to exit before signaling
bgwriter to finish. This avoids race conditions between a base backup stopping
or starting, and bgwriter writing the shutdown checkpoint WAL record. We don't
want e.g the end-of-backup WAL record to be written after the shutdown
checkpoint.
Makes it easier to parse mainly the BASE_BACKUP command
with it's options, and avoids having to manually deal
with quoted identifiers in the label (previously broken),
and makes it easier to add new commands and options in
the future.
In passing, refactor the case statement in the walsender
to put each command in it's own function.
When the exit waits until the whole backup completes, it may take
a very long time.
In passing, add back an error check in the main loop so we detect
clients that disconnect much earlier if the backup is large.
Fix broken test for pre-existing postmaster, caused by wrong code for
appending lines to the lockfile; don't write a failed listen_address
setting into the lockfile; don't arbitrarily change the location of the
data directory in the lockfile compared to previous releases; provide more
consistent and useful definitions of the socket path and listen_address
entries; avoid assuming that pg_ctl has the same DEFAULT_PGSOCKET_DIR as
the postmaster; assorted code style improvements.
This reverts commit d1001a78ce of 2010-12-05,
which was broken as reported by Jeff Davis. The problem is that the
individual planning steps may have side-effects on substructures of
PlannerGlobal, not only the current PlannerInfo root. Arranging to keep
all such side effects in the main planning context is probably possible,
but it would change this from a quick local hack into a wide-ranging and
rather fragile endeavor. Which it's not worth.
that can be read without blocking. It used to conclude that there isn't, even
though there was data in the socket receive buffer. That lead walreceiver to
flush the WAL after every received chunk, potentially causing big performance
issues.
Backpatch to 9.0, because the performance impact can be very significant.
Changing a file two directory levels deep under src/backend/ would not
cause the postgres binary to be rebuilt. This change fixes it, but no
one knows why.
Instead, run them in the encoding that the locale selects, which is
more representative of real use.
Also document how locale and encoding for regression test runs can be
selected.
In an inherited UPDATE/DELETE, each target table has its own subplan,
because it might have a column set different from other targets. This
means that the resjunk columns we add to support EvalPlanQual might be
at different physical column numbers in each subplan. The EvalPlanQual
rewrite I did for 9.0 failed to account for this, resulting in possible
misbehavior or even crashes during concurrent updates to the same row,
as seen in a recent report from Gordon Shannon. Revise the data structure
so that we track resjunk column numbers separately for each subplan.
I also chose to move responsibility for identifying the physical column
numbers back to executor startup, instead of assuming that numbers derived
during preprocess_targetlist would stay valid throughout subsequent
massaging of the plan. That's a bit slower, so we might want to consider
undoing it someday; but it would complicate the patch considerably and
didn't seem justifiable in a bug fix that has to be back-patched to 9.0.
Some versions of gcc complain about "variable `tablespaces' might be
clobbered by `longjmp' or `vfork'" with the original coding. Fix by
moving the PG_TRY block into a separate subroutine.
Per my note of a couple days ago, create_index_paths would refuse to
consider any path at all for GIN indexes if the selectivity estimate came
out as 1.0; not even if you tried to force it with enable_seqscan. While
this isn't really a bad outcome in practice, it could be annoying for
testing purposes. Adjust the test for "is this path only useful for
sorting" so that it doesn't fire on paths with nil pathkeys, which will
include all GIN paths.
When in streaming mode we can never get out, so it will never
be required, but after a base backup (or other operations)
we can get back to the loop, so the title needs to be cleared.
Add BASE_BACKUP command to walsender, allowing it to stream a
base backup to the client (in tar format). The syntax is still
far from ideal, that will be fixed in the switch to use a proper
grammar for walsender.
No client included yet, will come as a separate commit.
Magnus Hagander and Heikki Linnakangas
Move the actual functionality into a separate function that's
easier to call internally, and change the SQL-callable function
to be a wrapper calling this.
Also create a pg_abort_backup() function, only callable internally,
that does only the most vital parts of pg_stop_backup(), making it
safe(r) to call from error handlers.
This applies the fix for bug #5784 to remaining places where we wish
to reject nulls in user-supplied arrays. In all these places, there's
no reason not to allow a null bitmap to be present, so long as none of
the current elements are actually null.
I did not change some other places where we are looking at system catalog
entries or aggregate transition values, as the presence of a null bitmap
in such an array would be suspicious.
Add support for reading back information about the symbolic
links we've created with pgsymlink(), which are actually
Junction Points. Just like pgsymlink() can only create directory
symlinks, pgreadlink() can only read directory symlinks.
This will support fixing contrib/intarray (and probably other places)
so that they don't have to fail on arrays that contain a null bitmap
but no live null entries.
The only reason this wasn't crashing while testing the core anyarray
operators was that it was disabled for those cases because of passing the
wrong type information to get_opfamily_proc :-(. So fix that too, and make
it insist on finding the support proc --- in hindsight, silently doing
nothing is not as sane a coping mechanism as all that.
The only use we have had for amindexnulls is in determining whether an
index is safe to cluster on; but since the addition of the amclusterable
flag, that usage is pretty redundant.
In passing, clean up assorted sloppiness from the last patch that touched
pg_am.h: Natts_pg_am was wrong, and ambuildempty was not documented.
The original coding could combine duplicate entries only when they
originated from the same qual condition. In particular it could not
combine cases where multiple qual conditions all give rise to full-index
scan requests, which is an expensive case well worth optimizing. Refactor
so that duplicates are recognized across all the quals.
which is stored in pg_largeobject_metadata.
No backpatch to 9.0 because you can't migrate from 9.0 to 9.0 with the
same catversion (because of tablespace conflict), and a pre-9.0
migration to 9.0 has not large object permissions to migrate.
Toast tables have identical pg_class.oid and pg_class.relfilenode, but
for clarity it is good to preserve the pg_class.oid.
Update comments regarding what is preserved, and do some
variable/function renaming for clarity.
Add more "internal" arguments so that these pg_proc entries reflect the
current preferred API. This is purely a cosmetic change, since GIN doesn't
actually consult the pg_proc entry when calling a support function.
Accordingly, no catversion bump.
Per my recent proposal(s). Null key datums can now be returned by
extractValue and extractQuery functions, and will be stored in the index.
Also, placeholder entries are made for indexable items that are NULL or
contain no keys according to extractValue. This means that the index is
now always complete, having at least one entry for every indexed heap TID,
and so we can get rid of the prohibition on full-index scans. A full-index
scan is implemented much the same way as partial-match scans were already:
we build a bitmap representing all the TIDs found in the index, and then
drive the results off that.
Also, introduce a concept of a "search mode" that can be requested by
extractQuery when the operator requires matching to empty items (this is
just as cheap as matching to a single key) or requires a full index scan
(which is not so cheap, but it sure beats failing or giving wrong answers).
The behavior remains backward compatible for opclasses that don't return
any null keys or request a non-default search mode.
Using these features, we can now make the GIN index opclass for anyarray
behave in a way that matches the actual anyarray operators for &&, <@, @>,
and = ... which it failed to do before in assorted corner cases.
This commit fixes the core GIN code and ginarrayprocs.c, updates the
documentation, and adds some simple regression test cases for the new
behaviors using the array operators. The tsearch and contrib GIN opclass
support functions still need to be looked over and probably fixed.
Another thing I intend to fix separately is that this is pretty inefficient
for cases where more than one scan condition needs a full-index search:
we'll run duplicate GinScanEntrys, each one of which builds a large bitmap.
There is some existing logic to merge duplicate GinScanEntrys but it needs
refactoring to make it work for entries belonging to different scan keys.
Note that most of gin.h has been split out into a new file gin_private.h,
so that gin.h doesn't export anything that's not supposed to be used by GIN
opclasses or the rest of the backend. I did quite a bit of other code
beautification work as well, mostly fixing comments and choosing more
appropriate names for things.
This can be overriden by using NOREPLICATION on the CREATE ROLE
statement, but by default they will have it, making it backwards
compatible and "less surprising" (given that superusers normally
override all checks).
Add new function pg_sequence_parameters that returns a sequence's start,
minimum, maximum, increment, and cycle values, and use that in the view.
(bug #5662; design suggestion by Tom Lane)
Also slightly adjust the view's column order and permissions after review of
SQL standard.
Foreign tables are a core component of SQL/MED. This commit does
not provide a working SQL/MED infrastructure, because foreign tables
cannot yet be queried. Support for foreign table scans will need to
be added in a future patch. However, this patch creates the necessary
system catalog structure, syntax support, and support for ancillary
operations such as COMMENT and SECURITY LABEL.
Shigeru Hanada, heavily revised by Robert Haas
This is advantageous first because it allows us to hash the smaller table
regardless of the outer-join type, and second because hash join can be more
flexible than merge join in dealing with arbitrary join quals in a FULL
join. For merge join all the join quals have to be mergejoinable, but hash
join will work so long as there's at least one hashjoinable qual --- the
others can be any condition. (This is true essentially because we don't
keep per-inner-tuple match flags in merge join, while hash join can do so.)
To do this, we need a has-it-been-matched flag for each tuple in the
hashtable, not just one for the current outer tuple. The key idea that
makes this practical is that we can store the match flag in the tuple's
infomask, since there are lots of bits there that are of no interest for a
MinimalTuple. So we aren't increasing the size of the hashtable at all for
the feature.
To write this without turning the hash code into even more of a pile of
spaghetti than it already was, I rewrote ExecHashJoin in a state-machine
style, similar to ExecMergeJoin. Other than that decision, it was pretty
straightforward.
Instead, declare a public wrapper of the sole function using it for
external callers, so that they don't have to always pass a NULL
argument.
Author: Kevin Grittner
The contents of an unlogged table are WAL-logged; thus, they are not
available on standby servers and are truncated whenever the database
system enters recovery. Indexes on unlogged tables are also unlogged.
Unlogged GiST indexes are not currently supported.
This privilege is required to do Streaming Replication, instead of
superuser, making it possible to set up a SR slave that doesn't
have write permissions on the master.
Superuser privileges do NOT override this check, so in order to
use the default superuser account for replication it must be
explicitly granted the REPLICATION permissions. This is backwards
incompatible change, in the interest of higher default security.
The "date" type supports a wider range of dates than int64 timestamps do.
However, there is pre-int64-timestamp code in the planner that assumes that
all date values can be converted to timestamp with impunity. Fortunately,
what we really need out of the conversion is always a double (float8)
value; so even when the date is out of timestamp's range it's possible to
produce a sane answer. All we need is a code path that doesn't try to
force the result into int64. Per trouble report from David Rericha.
Back-patch to all supported versions. Although this is surely a corner
case, there's not much point in advertising a date range wider than
timestamp's if we will choke on such values in unexpected places.
This is to avoid use of the C++ keywords "bitand" and "bitor" in
the header file utils/varbit.h. Note the functions' SQL-level
names are not changed, only their C-level names.
In passing, make some comments in varbit.c conform to project-standard
layout.
This is slower than the original coding but avoids the problem of
including files in an unpredictable order. Aside from being more
trustworthy, we can get rid of some exclusions that were formerly
made for what turn out to be ordering or re-inclusion problems.
I also modified it to include libpq's exported files in the check.
ecpg should be included as well, but I'm unclear on which ecpg .h
files are meant to be included by clients.
"private" is a keyword in C++, so this breaks the poorly-enforced policy
that header files should be include-able in C++ code. Per report from
Craig Ringer and some investigation with cpluspluscheck.
My previous commit, 85cff3ce7f on
2010-12-25, failed to update errcodes.sgml or plerrcodes.h. This patch
corrects that oversight, per a gripe from Tom Lane, and also corrects
a typographical error.
string". This is not really needed because the string gets copied to the output
untranslated anyway, but by adding this rule the lexer stays in sync with the
backend lexer.
cleanup stage to finish incomplete inserts or splits anymore. There was two
reasons for the cleanup step:
1. When a new tuple was inserted to a leaf page, the downlink in the parent
needed to be updated to contain (ie. to be consistent with) the new key.
Updating the parent in turn might require recursively updating the parent of
the parent. We now handle that by updating the parent while traversing down
the tree, so that when we insert the leaf tuple, all the parents are already
consistent with the new key, and the tree is consistent at every step.
2. When a page is split, we need to insert the downlink for the new right
page(s), and update the downlink for the original page to not include keys
that moved to the right page(s). We now handle that by setting a new flag,
F_FOLLOW_RIGHT, on the non-rightmost pages in the split. When that flag is
set, scans always follow the rightlink, regardless of the NSN mechanism used
to detect concurrent page splits. That way the tree is consistent right after
split, even though the downlink is still missing. This is very similar to the
way B-tree splits are handled. When the downlink is inserted in the parent,
the flag is cleared. To keep the insertion algorithm simple, when an
insertion sees an incomplete split, indicated by the F_FOLLOW_RIGHT flag, it
finishes the split before doing anything else.
These changes allow removing the whole "invalid tuple" mechanism, but I
retained the scan code to still follow invalid tuples correctly. While we
don't create any such tuples anymore, we want to handle them gracefully in
case you pg_upgrade a GiST index that has them. If we encounter any on an
insert, though, we just throw an error saying that you need to REINDEX.
The issue that got me into doing this is that if you did a checkpoint while
an insert or split was in progress, and the checkpoint finishes quickly so
that there is no WAL record related to the insert between RedoRecPtr and the
checkpoint record, recovery from that checkpoint would not know to finish
the incomplete insert. IOW, we have the same issue we solved with the
rm_safe_restartpoint mechanism during normal operation too. It's highly
unlikely to happen in practice, and this fix is far too large to backpatch,
so we're just going to live with in previous versions, but this refactoring
fixes it going forward.
With this patch, you don't get the annoying
'index "FOO" needs VACUUM or REINDEX to finish crash recovery' notices
anymore if you crash at an unfortunate moment.
This function is like the PQserverVersion() function except
it returns the version of libpq, making it possible for a client
program or driver to determine which version of libpq is in
use at runtime, and not just at link time.
Suggested by Harald Armin Massa and several others.
It appears that this will be faster for all but the shortest strings;
at least one some platforms, memcmp() can use word-at-a-time comparisons.
Noah Misch, somewhat pared down.
On MacOS X, and apparently also on other BSD-derived systems, attaching
a debugger causes getppid() to return the pid of the debugging process
rather than the actual parent PID. As a result, debugging the
autovacuum launcher, startup process, or WAL sender on such systems
causes it to exit, because the previous coding of PostmasterIsAlive()
detects postmaster death by testing whether getppid() == PostmasterPid.
Work around that behavior by checking the return value of getppid()
more carefully. If it's PostmasterPid, the postmaster must be alive;
if it's 1, assume the postmaster is dead. If it's any other value,
assume we've been debugged and fall through to the less-reliable
kill() test.
Review by Tom Lane.
This case can arise if a transaction has written data, but only to
temporary tables. Loss of the commit record in case of a crash won't
matter, because the temporary tables will be lost anyway.
Reviewed by Heikki Linnakangas and Simon Riggs.
Since we're not multithreaded it only provides marginally useful
information, and it does require a newer version of the Platform SDK
than we target. We may want to reconsider this in the future along
with a fix for MinGW.
eval_const_expressions() can replace CaseTestExprs with constants when
the surrounding CASE's test expression is a constant. This confuses
ruleutils.c's heuristic for deparsing simple-form CASEs, leading to
Assert failures or "unexpected CASE WHEN clause" errors. I had put in
a hack solution for that years ago (see commit
514ce7a331 of 2006-10-01), but bug #5794
from Peter Speck shows that that solution failed to cover all cases.
Fortunately, there's a much better way, which came to me upon reflecting
that Peter's "CASE TRUE WHEN" seemed pretty redundant: we can "simplify"
the simple-form CASE to the general form of CASE, by simply omitting the
constant test expression from the rebuilt CASE construct. This is
intuitively valid because there is no need for the executor to evaluate
the test expression at runtime; it will never be referenced, because any
CaseTestExprs that would have referenced it are now replaced by constants.
This won't save a whole lot of cycles, since evaluating a Const is pretty
cheap, but a cycle saved is a cycle earned. In any case it beats kluging
ruleutils.c still further. So this patch improves const-simplification
and reverts the previous change in ruleutils.c.
Back-patch to all supported branches. The bug exists in 8.1 too, but it's
out of warranty.
After parsing a parenthesized subexpression, we must pop all pending
ANDs and NOTs off the stack, just like the case for a simple operand.
Per bug #5793.
Also fix clones of this routine in contrib/intarray and contrib/ltree,
where input of types query_int and ltxtquery had the same problem.
Back-patch to all supported versions.
Add support for collecting "minidump" style crash dumps on
Windows, by setting up an exception handling filter. Crash
dumps will be generated in PGDATA/crashdumps if the directory
is created (the existance of the directory is used as on/off
switch for the generation of the dumps).
Craig Ringer and Magnus Hagander
This prevents the word "waiting" from briefly disappearing from the ps
status line when ResolveRecoveryConflictWithVirtualXIDs begins a new
iteration of the outer loop.
Along the way, remove some useless pgstat_report_waiting() calls;
the startup process doesn't appear in pg_stat_activity.
Fujii Masao
These comments were not updated when we added the EXEC_BACKEND
mechanism for Windows, even though it rendered them inaccurate.
Also unify two unnecessarily-separate #ifdef __alpha code blocks.
We don't actually need optreset, because we can easily fix the code to
ensure that it's cleanly restartable after having completed a scan over the
argv array; which is the only case we need to restart in. Getting rid of
it avoids a class of interactions with the system libraries and allows
reversion of my change of yesterday in postmaster.c and postgres.c.
Back-patch to 8.4. Before that the getopt code was a bit different anyway.
libpq connection, per report from Magnus. This happens only on GIT
master and only on Win32 because that is the platform where "" maps to
an IP address (localhost).
The mingw people don't appear to care about compatibility with non-GNU
versions of getopt, so force use of our own copy of getopt on Windows.
Also, ensure that we make use of optreset when using our own copy.
Per report from Andrew Dunstan. Back-patch to all versions supported
on Windows.
Allow INSERT INTO, UPDATE, and DELETE FROM to be completed with
either the name of a table (as before) or the name of a view with
an appropriate INSTEAD OF rule.
Along the way, allow CREATE TRIGGER to be completed with INSTEAD OF,
as well as BEFORE and AFTER.
David Fetter, reviewed by Itagaki Takahiro
This commit replaces pg_class.relistemp with pg_class.relpersistence;
and also modifies the RangeVar node type to carry relpersistence rather
than istemp. It also removes removes rd_istemp from RelationData and
instead performs the correct computation based on relpersistence.
For clarity, we add three new macros: RelationNeedsWAL(),
RelationUsesLocalBuffers(), and RelationUsesTempNamespace(), so that we
can clarify the purpose of each check that previous depended on
rd_istemp.
This is intended as infrastructure for the upcoming unlogged tables
patch, as well as for future possible work on global temporary tables.
We were failing to zero out some pg_stat_database counters that have
been added since the initial pgstats coding. This is a bug, but not
back-patching the fix since changing this behavior in a minor release
seems a cure worse than the disease.
Report and patch by Tomas Vondra.
mkdir_p and check_data_dir will be useful in CREATE TABLESPACE, since we
have agreed that that command should handle subdirectory creation just like
initdb creates the PGDATA directory. Push them into src/port/ so that they
are available to both initdb and the backend. Rename to pg_mkdir_p and
pg_check_dir, just to be on the safe side. Add FreeBSD's copyright notice
to pgmkdirp.c, since that's where the code came from originally (this
really should have been in initdb.c). Very marginal code/comment cleanup.
Purely cosmetic patch to make our coding standards more consistent ---
we were doing symbolic some places and octal other places. This patch
fixes all C-coded uses of mkdir, chmod, and umask. There might be some
other calls I missed. Inconsistency noted while researching tablespace
directory permissions issue.
The original coding in tuplestore_trim() was only meant to work efficiently
in cases where each trim call deleted most of the tuples in the store.
Which, in fact, was the pattern of the original usage with a Material node
supporting mark/restore operations underneath a MergeJoin. However,
WindowAgg now uses tuplestores and it has considerably less friendly
trimming behavior. In particular it can attempt to trim one tuple at a
time off a large tuplestore. tuplestore_trim() had O(N^2) runtime in this
situation because of repeatedly shifting its tuple pointer array. Fix by
avoiding shifting the array until a reasonably large number of tuples have
been deleted. This can waste some pointer space, but we do still reclaim
the tuples themselves, so the percentage wastage should be pretty small.
Per Jie Li's report of slow percent_rank() evaluation. cume_dist() and
ntile() would certainly be affected as well, along with any other window
function that has a moving frame start and requires reading substantially
ahead of the current row.
Back-patch to 8.4, where window functions were introduced. There's no
need to tweak it before that.
With hundreds of thousands of TOC entries, the repeated searches in
reduce_dependencies() become the dominant cost. Get rid of that searching
by constructing reverse-dependency lists, which we can do in O(N) time
during the fix_dependencies() preprocessing. I chose to store the reverse
dependencies as DumpId arrays for consistency with the forward-dependency
representation, and keep the previously-transient tocsByDumpId[] array
around to locate actual TOC entry structs quickly from dump IDs.
While this fixes the slow case reported by Vlad Arkhipov, there is still
a potential for O(N^2) behavior with sufficiently many tables:
fix_dependencies itself, as well as mark_create_done and
inhibit_data_for_failed_table, are doing repeated searches to deal with
table-to-table-data dependencies. Possibly this work could be extended
to deal with that, although the latter two functions are also used in
non-parallel restore where we currently don't run fix_dependencies.
Another TODO is that we fail to parallelize restore of multiple blobs
at all. This appears to require changes in the archive format to fix.
Back-patch to 9.0 where the problem was reported. 8.4 has potential issues
as well; but since it doesn't create a separate TOC entry for each blob,
it's at much less risk of having enough TOC entries to cause real problems.
Hot Standby conflicts only with tuples that were visible at
some point. So ignore tuples from aborted transactions or for
tuples updated/deleted during the inserting transaction when
generating the conflict transaction ids.
Following detailed analysis and test case by Noah Misch.
Original report covered btree delete records, correctly observed
by Heikki Linnakangas that this applies to other cases also.
Fix covers all sources of cleanup records via common code.
Recent versions of the Linux system header files cause xlogdefs.h to
believe that open_datasync should be the default sync method, whereas
formerly fdatasync was the default on Linux. open_datasync is a bad
choice, first because it doesn't actually outperform fdatasync (in fact
the reverse), and second because we try to use O_DIRECT with it, causing
failures on certain filesystems (e.g., ext4 with data=journal option).
This part of the patch is largely per a proposal from Marti Raudsepp.
More extensive changes are likely to follow in HEAD, but this is as much
change as we want to back-patch.
Also clean up confusing code and incorrect documentation surrounding the
fsync_writethrough option. Those changes shouldn't result in any actual
behavioral change, but I chose to back-patch them anyway to keep the
branches looking similar in this area.
In 9.0 and HEAD, also do some copy-editing on the WAL Reliability
documentation section.
Back-patch to all supported branches, since any of them might get used
on modern Linux versions.
First, avoid scanning the whole ProcArray once we know there
are at least commit_siblings active; second, skip the check
altogether if commit_siblings = 0.
Greg Smith
an old transaction running in the master, and a lot of transactions have
started and finished since, and a WAL-record is written in the gap between
the creating the running-xacts snapshot and WAL-logging it, recovery will fail
with "too many KnownAssignedXids" error. This bug was reported by
Joachim Wieland on Nov 19th.
In the same scenario, when fewer transactions have started so that all the
xids fit in KnownAssignedXids despite the first bug, a more serious bug
arises. We incorrectly initialize the clog code with the oldest still running
transaction, and when we see the WAL record belonging to a transaction with
an XID larger than one that committed already before the checkpoint we're
recovering from, we zero the clog page containing the already committed
transaction, leading to data loss.
In hindsight, trying to track xids in the known-assigned-xids array before
seeing the running-xacts record was too complicated. To fix that, hold
XidGenLock while the running-xacts snapshot is taken and WAL-logged. That
ensures that no transaction can begin or end in that gap, so that in recvoery
we know that the snapshot contains all transactions running at that point in
WAL.
There are some code paths, such as SPI_execute(), where we invoke
copyObject() on raw parse trees before doing parse analysis on them. Since
the bison grammar is capable of building heavily nested parsetrees while
itself using only minimal stack depth, this means that copyObject() can be
the front-line function that hits stack overflow before anything else does.
Accordingly, it had better have a check_stack_depth() call. I did a bit of
performance testing and found that this slows down copyObject() by only a
few percent, so the hit ought to be negligible in the context of complete
processing of a query.
Per off-list report from Toshihide Katayama. Back-patch to all supported
branches.
This doesn't involve any user-visible change in behavior, but will be
useful when the COPY routines are exposed to allow their use by Foreign
Data Wrapper routines, which will be able to use these routines to read
irregular CSV files, for example.
Avoid eating quite so much memory for large inheritance trees, by
reclaiming the space used by temporary copies of the original parsetree and
range table, as well as the workspace needed during planning. The cost is
needing to copy the finished plan trees out of the child memory context.
Although this looks like it ought to slow things down, my testing shows
it actually is faster, apparently because fewer interactions with malloc()
are needed and/or we can do the work within a more readily cacheable amount
of memory. That result might be platform-dependent, but I'll take it.
Per a gripe from John Papandriopoulos, in which it was pointed out that the
memory consumption actually grew as O(N^2) for sufficiently many child
tables, since we were creating N copies of the N-element range table.
1. Complain, rather than silently doing nothing, if an "invalid" tuple
is found on a leaf page. Per off-list discussion with Heikki.
2. Fix oversight in code that removes a GISTSearchItem from the search
queue: we have to reset lastHeap if this was the last heap item in the
parent GISTSearchTreeItem. Otherwise subsequent additions will do the
wrong thing. This was probably masked in early testing because in typical
cases the parent item would now be completely empty and would be deleted on
next call. You'd need a queued non-leaf page at exactly the same distance
as a heap tuple to expose the bug.
This commit represents a rather heavily editorialized version of
Teodor's builtin_knngist_itself-0.8.2 and builtin_knngist_proc-0.8.1
patches. I redid the opclass API to add a separate Distance method
instead of turning the Consistent method into an illogical mess,
fixed some bit-rot in the rbtree interfaces, and generally worked over
the code style and comments.
There's still no non-code documentation to speak of, but I'll work on
that separately. Some contrib-module changes are also yet to come
(right now, point <-> point is the only KNN-ified operator).
Teodor Sigaev and Tom Lane
This eliminates some crufty, special-purpose code and, as a non-trivial
side benefit, allows recovery.conf parameters to be unquoted.
Dimitri Fontaine, with review and cleanup by Alvaro Herrera, Itagaki
Takahiro, and me.
This is a heavily revised version of builtin_knngist_core-0.9. The
ordering operators are no longer mixed in with actual quals, which would
have confused not only humans but significant parts of the planner.
Instead, ordering operators are carried separately throughout planning and
execution.
Since the API for ambeginscan and amrescan functions had to be changed
anyway, this commit takes the opportunity to rationalize that a bit.
RelationGetIndexScan no longer forces a premature index_rescan call;
instead, callers of index_beginscan must call index_rescan too. Aside from
making the AM-side initialization logic a bit less peculiar, this has the
advantage that we do not make a useless extra am_rescan call when there are
runtime key values. AMs formerly could not assume that the key values
passed to amrescan were actually valid; now they can.
Teodor Sigaev and Tom Lane
to make it easier to reuse that code. There is no user-visible changes.
This is in preparation for the patch to add a new archive format, a directory,
to perform a custom-like dump but with each table being dumped to a separate
file (that in turn is a prerequisite for parallel pg_dump). This also makes it
easier to add new compression methods in the future, and makes the
pg_backup_custom.c code easier to read, when the compression-related code is
factored out.
Joachim Wieland, with heavy editorialization by me.
There were corner cases in which the planner would attempt to inline such
a function, which would result in a failure at runtime due to loss of
information about exactly what the result record type is. Fix by disabling
inlining when the function's recorded result type is RECORD. There might
be some sub-cases where inlining could still be allowed, but this is a
simple and backpatchable fix, so leave refinements for another day.
Per bug #5777 from Nate Carson.
Back-patch to all supported branches. 8.1 happens to avoid a core-dump
here, but it still does the wrong thing.
Formerly we looked up the operators associated with each index (caching
them in relcache) and then the planner looked up the btree opfamily
containing such operators in order to build the btree-centric pathkey
representation that describes the index's sort order. This is quite
pointless for btree indexes: we might as well just use the index's opfamily
information directly. That saves syscache lookup cycles during planning,
and furthermore allows us to eliminate the relcache's caching of operators
altogether, which may help in reducing backend startup time.
I added code to plancat.c to perform the same type of double lookup
on-the-fly if it's ever faced with a non-btree amcanorder index AM.
If such a thing actually becomes interesting for production, we should
replace that logic with some more-direct method for identifying the
corresponding btree opfamily; but it's not worth spending effort on now.
There is considerably more to do pursuant to my recent proposal to get rid
of sort-operator-based representations of sort orderings, but this patch
grabs some of the low-hanging fruit. I'll look at the remainder of that
work after the current commitfest.
removing an infrequently occurring race condition in Hot Standby.
An xid must be assigned before a lock appears in shared memory,
rather than immediately after, else GetRunningTransactionLocks()
may see InvalidTransactionId, causing assertion failures during
lock processing on standby.
Bug report and diagnosis by Fujii Masao, fix by me.
Basically, we want to distinguish all cases where the connection was
not made from those where it was. A convenient proxy for this is to
see if we got a message with a SQLSTATE code back from the postmaster.
This presumes that the postmaster will always send us a SQLSTATE in
a failure message, which is true for 7.4 and later postmasters in
every case except fork failure. (We could possibly complicate the
postmaster code to do something about that, but it seems not worth
the trouble, especially since pg_ctl's response for that case should
be to keep waiting anyway.)
If we did get a SQLSTATE from the postmaster, there are basically only
two cases, as per last week's discussion: ERRCODE_CANNOT_CONNECT_NOW
and everything else. Any other error code implies that the postmaster
is in principle willing to accept connections, it just didn't like or
couldn't handle this particular request. We want to make a special
case for ERRCODE_CANNOT_CONNECT_NOW so that "pg_ctl start -w" knows
it should keep waiting.
In passing, pick names for the enum constants that are a tad less
likely to present collision hazards in future.
1. Don't #include postgres.h in a frontend build.
2. Don't assume that the backend's symbol PGSQL_AF_INET6 has anything to do
with the constant that will be used by system library functions (because,
in point of fact, it usually doesn't). Fortunately, PGSQL_AF_INET is equal
to AF_INET, so we can just cater for both sets of values in one case
construct without fear of conflict.
This adds support for changing the schema of a conversion, operator,
operator class, operator family, text search configuration, text search
dictionary, text search parser, or text search template.
Dimitri Fontaine, with assorted corrections and other kibitzing.
status, including a status where the server is running but refuses a
postgres connection.
Have pg_ctl use this new function. This fixes the case where pg_ctl
reports that the server is not running (cannot connect) but in fact it
is running.
After a SQL object is created, we provide an opportunity for security
or logging plugins to get control; for example, a security label provider
could use this to assign an initial security label to newly created
objects. The basic infrastructure is (hopefully) reusable for other types
of events that might require similar treatment.
KaiGai Kohei, with minor adjustments.
Forcibly releasing all leftover buffer pins should be unnecessary now
that we have a robust ResourceOwner mechanism, and it significantly
increases the cost of process shutdown. Instead, in an assert-enabled
build, assert that no pins are held; in a non-assert-enabled build, do
nothing.
supplied, also print the IP address. This allows IPv4 and IPv6 failures
to be distinguished. Also useful when a hostname resolves to multiple
IP addresses.
Also, remove use of inet_ntoa() and use our own inet_net_ntop() in all
places, including in libpq, because it is thread-safe.
This commit adds columns amoppurpose and amopsortfamily to pg_amop, and
column amcanorderbyop to pg_am. For the moment all the entries in
amcanorderbyop are "false", since the underlying support isn't there yet.
Also, extend the CREATE OPERATOR CLASS/ALTER OPERATOR FAMILY commands with
[ FOR SEARCH | FOR ORDER BY sort_operator_family ] clauses to allow the new
columns of pg_amop to be populated, and create pg_dump support for dumping
that information.
I also added some documentation, although it's perhaps a bit premature
given that the feature doesn't do anything useful yet.
Teodor Sigaev, Robert Haas, Tom Lane
Any flavor of ALTER <whatever> .. SET SCHEMA fails if (1) the object
is already in the new schema, (2) either the old or new schema is
a temp schema, or (3) either the old or new schema is the TOAST schema.
Extraced from a patch by Dimitri Fontaine, with additional hacking by me.
Currently, three conversion format specifiers are supported: %s for a
string, %L for an SQL literal, and %I for an SQL identifier. The latter
two are deliberately designed not to overlap with what sprintf() already
supports, in case we want to add more of sprintf()'s functionality here
later.
Patch by Pavel Stehule, heavily revised by me. Reviewed by Jeff Janes
and, in earlier versions, by Itagaki Takahiro and Tom Lane.
We no longer need the terminating zero entry in opfamily[], so get rid of
it. Also replace assorted ad-hoc looping logic with simple for and foreach
constructs. This code is now noticeably more readable than it was an hour
ago; credit to Robert for seeing that it could be simplified.
Avoid depending on LL notation, which is likely to not work in pre-C99
compilers; don't pointlessly use INT32_MIN/INT64_MIN in code that has
the numerical value hard-wired into it anyway; remove some gratuitous
style inconsistencies between pg_ltoa and pg_lltoa; fix int2 test case
so it actually tests int2.
This eliminates the need for inefficient implementions of this
functionality in both contrib/dblink and contrib/tablefunc, so remove
them. The upcoming patch implementing an in-core format() function
will also require this functionality.
In passing, add some regression tests.
Use INT_MIN rather than INT32_MIN as we do elsewhere in the code, and
try to work around nonexistence of INT64_MIN if necessary. Adjust the
new regression tests to something hopefully saner, per observation by
Tom Lane.
When using default autovacuum_vac_cost_limit, autovac_balance_cost relied
on VacuumCostLimit to contain the correct global value ... but after the
first time through in a particular worker process, it didn't, because we'd
trashed it in previous iterations. Depending on the state of other autovac
workers, this could result in a steady reduction of the effective
cost_limit setting as a particular worker processed more and more tables,
causing it to go slower and slower. Spotted by Simon Poole (bug #5759).
Fix by saving and restoring the GUC variables in the loop in do_autovacuum.
In passing, improve a few comments.
Back-patch to 8.3 ... the cost rebalancing code has been buggy since it was
put in.
A hand-coded implementation turns out to be much faster than calling
printf(). In passing, add a few more regresion tests.
Andres Freund, with assorted, mostly cosmetic changes.
As per the ancient comment for set_rel_width, it really wasn't much good
for relations that aren't plain tables: it would never find any stats and
would always fall back on datatype-based estimates, which are often pretty
silly. Fix that by copying up width estimates from the subquery planning
process.
At some point we might want to do this for CTEs too, but that would be a
significantly more invasive patch because the sub-PlannerInfo is no longer
accessible by the time it's needed. I refrained from doing anything about
that, partly for fear of breaking the unmerged CTE-related patches.
In passing, also generate less bogus width estimates for whole-row Vars.
Per a gripe from Jon Nelson.
Given a column reference foo.bar, where there is a composite plpgsql
variable foo but it doesn't contain a column bar, the pre-9.0 coding would
immediately throw a "record foo has no field bar" error. In 9.0 the parser
hook instead falls through to let the core parser see if it can resolve the
reference. If not, you get a complaint about "missing FROM-clause entry
for table foo", which while in some sense correct isn't terribly helpful.
Complicate things a bit so that we can throw the old error message if
neither the core parser nor the hook are able to resolve the column
reference, while not changing the behavior in any other case.
Per bug #5757 from Andrey Galkin.
If we have Limit->Result->Sort, the Result might be projecting a tlist
that contains a set-returning function. If so, it's possible for the
SRF to sometimes return zero rows, which means we could need to fetch
more than N rows from the Sort in order to satisfy LIMIT N.
So top-N sorting cannot be used in this scenario.
Fix things so that top-N sorting can be used in child Sort nodes of a
MergeAppend node, when there is a LIMIT and no intervening joins or
grouping. Actually doing this on the executor side isn't too bad,
but it's a bit messier to get the planner to cost it properly.
Per gripe from Robert Haas.
In passing, fix an oversight in the original top-N-sorting patch:
query_planner should not assume that a LIMIT can be used to make an
explicit sort cheaper when there will be grouping or aggregation in
between. Possibly this should be back-patched, but I'm not sure the
mistake is serious enough to be a real problem in practice.
In the previous coding, we simply issued ALTER SEQUENCE RESTART commands,
which do not roll back on error. This meant that an error between
truncating and committing left the sequences out of sync with the table
contents, with potentially bad consequences as were noted in a Warning on
the TRUNCATE man page.
To fix, create a new storage file (relfilenode) for a sequence that is to
be reset due to RESTART IDENTITY. If the transaction aborts, we'll
automatically revert to the old storage file. This acts just like a
rewriting ALTER TABLE operation. A penalty is that we have to take
exclusive lock on the sequence, but since we've already got exclusive lock
on its owning table, that seems unlikely to be much of a problem.
The interaction of this with usual nontransactional behaviors of sequence
operations is a bit weird, but it's hard to see what would be completely
consistent. Our choice is to discard cached-but-unissued sequence values
both when the RESTART is executed, and at rollback if any; but to not touch
the currval() state either time.
In passing, move the sequence reset operations to happen before not after
any AFTER TRUNCATE triggers are fired. The previous ordering was not
logically sensible, but was forced by the need to minimize inconsistency
if the triggers caused an error. Transactional rollback is a much better
solution to that.
Patch by Steve Singer, rather heavily adjusted by me.
Add some additional dependencies to constrain the build order to prevent
parallel make from failing. In the case of src/Makefile, this is likely to be
too complicated to be worth maintaining, so just add .NOTPARALLEL to get the
old for-loop-like behavior.
More fine-tuning might be necessary for some platforms or configurations.
The handle to the shared memory segment containing startup
parameters was sent as 32-bit even on 64-bit systems. Since
HANDLEs appear to be allocated sequentially this shouldn't
be a problem until we reach 2^32 open handles in the postmaster,
but a 64-bit value should be sent across as 64-bit, and not
zero out the top 32 bits.
Noted by Tom Lane.
temporary indexes are not WAL-logged. We used a constant LSN for temporary
indexes, on the assumption that we don't need to worry about concurrent page
splits in temporary indexes because they're only visible to the current
session. But that assumption is wrong, it's possible to insert rows and
split pages in the same session, while a scan is in progress. For example,
by opening a cursor and fetching some rows, and INSERTing new rows before
fetching some more.
Fix by generating fake increasing LSNs, used in place of real LSNs in
temporary GiST indexes.
We must stay in the function's SPI context until done calling the iterator
that returns the set result. Otherwise, any attempt to invoke SPI features
in the python code called by the iterator will malfunction. Diagnosis and
patch by Jan Urbanski, per bug report from Jean-Baptiste Quenot.
Back-patch to 8.2; there was no support for SRFs in previous versions of
plpython.
This new field counts the number of times that a backend which writes a
buffer out to the OS must also fsync() it. This happens when the
bgwriter fsync request queue is full, and is generally detrimental to
performance, so it's good to know when it's happening. Along the way,
log a new message at level DEBUG1 whenever we fail to hand off an fsync,
so that the problem can also be seen in examination of log files
(if the logging level is cranked up high enough).
Greg Smith, with minor tweaks by me.
Similar conflicts were already avoided for related record types.
Massive over-caution resulted in a usability bug. Clear theoretical
basis for doing this is now confirmed by me.
Request to remove from Heikki (twice), over-caution by me.
We must not return any "okay to proceed" result code without having checked
for too many children, else we might fail later on when trying to add the
new child to one of the per-child state arrays. It's not clear whether
this oversight explains Stefan Kaltenbrunner's recent report, but it could
certainly produce a similar symptom.
Back-patch to 8.4; the logic was not broken before that.
3.80 breaks if the expansion of $(eval) is long enough to require expansion
of its internal variable_buffer. For the purposes of $(recurse) that means
it'll work so long as no single evaluation of _create_recursive_target
produces more than 195 bytes. We can manage that by looping over
subdirectories outside the call instead of complicating the generated rule.
This coding is simpler and more readable anyway.
Or at least, this works for me. We'll see if the buildfarm likes it.
This is needed to support debug_print_parse, per report from Jon Nelson.
Cursory testing via the regression tests suggests we aren't missing
anything else.
Having this in src/include/port.h makes no sense, now that copydir.c lives
in src/backend/strorage rather than src/port. Along the way, remove an
obsolete comment from contrib/pg_upgrade that makes reference to the old
location.
Once we have found a non-null constant argument, there is no need to
examine additional arguments of the COALESCE. The previous coding got it
right only if the constant was in the first argument position; otherwise
it tried to simplify following arguments too, leading to unexpected
behavior like this:
regression=# select coalesce(f1, 42, 1/0) from int4_tbl;
ERROR: division by zero
It's a minor corner case, but a bug is a bug, so back-patch all the way.
Replace for loops in makefiles with proper dependencies. Parallel
make can now span across directories. Also, make -k and make -q work
properly.
GNU make 3.80 or newer is now required.
belonging to a user at DROP OWNED BY. Foreign data wrappers and servers
don't do anything useful yet, which is why no-one has noticed, but since we
have them, seems prudent to fix this. Per report from Chetan Suttraway.
Backpatch to 9.0, 8.4 has the same problem but this patch didn't apply
there so I'm not going to bother.
location read from backup label file can be found: wasShutdown was set
incorrectly when a backup label file was found.
Jeff Davis, with a little tweaking by me.
This code was just plain wrong: what you got was not a line through the
given point but a line almost indistinguishable from the Y-axis, although
not truly vertical. The only caller that tries to use this function with
m == DBL_MAX is dist_ps_internal for the case where the lseg is horizontal;
it would end up producing the distance from the given point to the place
where the lseg's line crosses the Y-axis. That function is used by other
operators too, so there are several operators that could compute wrong
distances from a line segment to something else. Per bug #5745 from
jindiax.
Back-patch to all supported branches.
The general design of memory management in Postgres is that intermediate
results computed by an expression are not freed until the end of the tuple
cycle. For expression indexes, ANALYZE has to re-evaluate each expression
for each of its sample rows, and it wasn't bothering to free intermediate
results until the end of processing of that index. This could lead to very
substantial leakage if the intermediate results were large, as in a recent
example from Jakub Ouhrabka. Fix by doing ResetExprContext for each sample
row. This necessitates adding a datumCopy step to ensure that the final
expression value isn't recycled too. Some quick testing suggests that this
change adds at worst about 10% to the time needed to analyze a table with
an expression index; which is annoying, but seems a tolerable price to pay
to avoid unexpected out-of-memory problems.
Back-patch to all supported branches.
length stored in the line pointer the same way it's calculated in the normal
heap_insert() codepath. As noted by Jeff Davis, the length stored by
raw_heap_insert() included padding but the one stored by the normal codepath
did not. While the mismatch seems to be harmless, inconsistency isn't good,
and the normal codepath has received a lot more testing over the years.
Backpatch to 8.3 where the heap rewrite code was introduced.
The original coding in FileClose() reset the file-is-temp flag before
unlinking the file, so that if control came back through due to an error,
it wouldn't try to unlink the file twice. This was correct when written,
but when the log_temp_files feature was added, the logging action was put
in between those two steps. An error occurring during the logging action
--- such as a query cancel --- would result in the unlink not getting done
at all, as in recent report from Michael Glaesemann.
To fix this, make sure that we do both the stat and the unlink before doing
anything that could conceivably CHECK_FOR_INTERRUPTS. There is a judgment
call here, which is which log message to emit first: if you can see only
one, which should it be? I chose to log unlink failure at the risk of
losing the log_temp_files log message --- after all, if the unlink does
fail, the temp file is still there for you to see.
Back-patch to all versions that have log_temp_files. The code was OK
before that.
get_database_list was uselessly allocating its output data, along some
created along the way, in a permanent memory context. This didn't
matter when autovacuum was a single, short-lived process, but now that
the launcher is permanent, it shows up as a permanent leak.
To fix, make get_database list allocate its output data in the caller's
context, which is in charge of freeing it when appropriate; and the
memory leaked by heap_beginscan et al is allocated in a throwaway
transaction context.
Formerly, we could convert a UNION ALL structure inside a subquery-in-FROM
into an appendrel, as a side effect of pulling up the subquery into its
parent; but top-level UNION ALL always caused use of plan_set_operations().
That didn't matter too much because you got an Append-based plan either
way. However, now that the appendrel code can do things with MergeAppend,
it's worthwhile to hack up the top-level case so it also uses appendrels.
This is a bit of a stopgap; but going much further than this will require
a major rewrite of the planner's set-operations support, which I'm not
prepared to undertake now. For the moment let's grab the low-hanging fruit.
PG 8.4 added a built-in feature for casting pretty much any data type to
string types (text, varchar, etc). We allowed this to work in any of the
historically-allowed syntaxes: CAST(x AS text), x::text, text(x), or
x.text. However, multiple complaints have shown that it's too easy to
invoke such casts unintentionally in the latter two styles, particularly
field selection. To cure the problem with the narrowest possible change
of behavior, disallow use of I/O conversion casts from composite types to
string types via functional/attribute syntax. The new functionality is
still available via cast syntax.
In passing, document the equivalence of functional and attribute syntax
in a more visible place.
\dn without "S" now hides all pg_XXX schemas as well as information_schema.
Thus, in a bare database you'll only see "public". ("public" is considered
a user schema, not a system schema, mainly because it's droppable.)
Per discussion back in late September.
Per recent investigation, the register stack can grow faster than the
regular stack depending on compiler and choice of options. To avoid
crashes we must check both stacks in check_stack_depth().
Since this is poorly-tested code, committing only to HEAD for the
moment ... but we might want to consider back-patching later.
Rather than considering this result as meaning "unknown", report LONG_MAX.
This won't change what superusers can set max_stack_depth to, but it will
cause InitializeGUCOptions() to set the built-in default to 2MB not 100kB.
The latter seems like a fairly unreasonable interpretation of "infinity".
Per my investigation of odd buildfarm results as well as an old complaint
from Heikki.
Since this should persuade all the buildfarm animals to use a reasonable
stack depth setting during "make check", revert previous patch that dumbed
down a recursive regression test to only 5 levels.
I'm mainly interested in finding out what it is on buildfarm machines,
but including the active value in the message seems like good practice
in any case. Add the info to the HINT, not the ERROR string, so as not
to change the regression tests' expected output.
The nominally equivalent call appendStringInfo(buf, "%s", str) can be
significantly slower when str is large. In particular, the former usage in
EVALUATE_MESSAGE led to O(N^2) behavior when collecting a large number of
context lines, as I found out while testing recursive functions. The other
changes are just neatnik-ism and seem unlikely to save anything meaningful,
but a cycle shaved is a cycle earned.
Per my recent proposal, get rid of all the direct inspection of indexes
and manual generation of paths in planagg.c. Instead, set up
EquivalenceClasses for the aggregate argument expressions, and let the
regular path generation logic deal with creating paths that can satisfy
those sort orders. This makes planagg.c a bit more visible to the rest
of the planner than it was originally, but the approach is basically a lot
cleaner than before. A major advantage of doing it this way is that we get
MIN/MAX optimization on inheritance trees (using MergeAppend of indexscans)
practically for free, whereas in the old way we'd have had to add a whole
lot more duplicative logic.
One small disadvantage of this approach is that MIN/MAX aggregates can no
longer exploit partial indexes having an "x IS NOT NULL" predicate, unless
that restriction or something that implies it is specified in the query.
The previous implementation was able to use the added "x IS NOT NULL"
condition as an extra predicate proof condition, but in this version we
rely entirely on indexes that are considered usable by the main planning
process. That seems a fair tradeoff for the simplicity and functionality
gained.
Some buildfarm members fail the test with the original depth of 10 levels,
apparently because they are running at the minimum max_stack_depth setting
of 100kB and using ~ 10k per recursion level. While it might be
interesting to try to figure out why they're eating so much stack, it isn't
likely that any fix for that would be back-patchable. So just change the
test to recurse only 5 levels. The extra levels don't prove anything
correctness-wise anyway.
Like plperl and unlike plpgsql, there isn't any cached state that could
depend on exactly which relation the trigger is being fired for. So we
can use just one hash entry for all relations, which might save a little
something.
Alex Hunsaker
It was reporting that these were fully indexed (hence cheap), when of
course they're the exact opposite of that. I'm not certain if the case
would arise in practice, since a clauseless semijoin is hard to produce
in SQL, but if it did happen we'd make some dumb decisions.
We failed to record any dependency on the underlying table for an index
declared like "create index i on t (foo(t.*))". This would create trouble
if the table were dropped without previously dropping the index. To fix,
simplify some overly-cute code in index_create(), accepting the possibility
that sometimes the whole-table dependency will be redundant. Also document
this hazard in dependency.c. Per report from Kevin Grittner.
In passing, prevent a core dump in pg_get_indexdef() if the index's table
can't be found. I came across this while experimenting with Kevin's
example. Not sure it's a real issue when the catalogs aren't corrupt, but
might as well be cautious.
Back-patch to all supported versions.
Use bool as type for booleans instead of int.
Do not implicitely cast size_t to int.
Make the compiler stop complaining about unused variables by adding an empty statement.
rather than 0/0, so that we can safely use 0/0 as an invalid value. This is a
more future-proof fix for the corner-case bug in streaming replication that
was fixed yesterday. We had a similar corner-case bug with log/seg 0/0 back in
February as well. Avoiding 0/0 as a valid value should prevent bugs like that
in the future. Per Tom Lane's idea.
Back-patch to 9.0. Since this only affects bootstrapping, it makes no
difference to existing installations. We don't need to worry about the
bug in existing installations, because if you've managed to get past the
initial base backup already, you won't hit the bug in the future either.
and related routines.
We already had a redundant FunctionCallInfoData struct in FuncExprState,
but were using that copy only in set-returning-function cases, to avoid
keeping function evaluation state in the expression tree for the benefit
of plpgsql's "simple expression" logic. But of course that didn't work
anyway. Given the recent fixes in plpgsql there is no need to have two
separate behaviors here. Getting rid of the local FunctionCallInfoData
structs should make things a little faster (because we don't need to do
InitFunctionCallInfoData each time), and it also makes for a noticeable
reduction in stack space consumption during recursive calls.
streaming replication. We used log/seg 0/0 to indicate that no WAL segments
have been removed since startup, but 0/0 is a valid value for the very first
WAL segment after initdb. To make that disambiguous, store
(latest removed WAL segment + 1) in the global variable.
Per report from Matt Chesler, also reproduced by Greg Smith.
As noted by Jan Urbanski, this flag is in fact needed to ensure that the
function's input/result conversion functions are set up as expected.
Add a regression test to discourage anyone from making same mistake
in future.
The core of this patch is hash_array() and associated typcache
infrastructure, which works just about exactly like the existing support
for array comparison.
In addition I did some work to ensure that the planner won't think that an
array type is hashable unless its element type is hashable, and similarly
for sorting. This includes adding a datatype parameter to op_hashjoinable
and op_mergejoinable, and adding an explicit "hashable" flag to
SortGroupClause. The lack of a cross-check on the element type was a
pre-existing bug in mergejoin support --- but it didn't matter so much
before, because if you couldn't sort the element type there wasn't any good
alternative to failing anyhow. Now that we have the alternative of hashing
the array type, there are cases where we can avoid a failure by being picky
at the planner stage, so it's time to be picky.
The issue of exactly how to combine the per-element hash values to produce
an array hash is still open for discussion, but the rest of this is pretty
solid, so I'll commit it as-is.
Per C standard, these are semantically the same thing; but saying NULL
when you mean NULL is good for readability.
Marti Raudsepp, per results of INRIA's Coccinelle.
Now that we're expecting a mergeclause's left_ec/right_ec to persist from
the initial assignments, we can't just blithely zero these out when
transforming such a clause in adjust_appendrel_attrs. But really it should
be okay to keep the parent's values, since a child table's derived Var
ought to be equivalent to the parent Var for all EquivalenceClass purposes.
(Indeed, I'm wondering whether we couldn't find a way to dispense with
add_child_rel_equivalences altogether. But this is wrong in any case.)
Zoltan Boszormenyi exhibited a test case in which planning time was
dominated by construction of EquivalenceClasses and PathKeys that had no
actual relevance to the query (and in fact got discarded immediately).
This happened because we generated PathKeys describing the sort ordering of
every index on every table in the query, and only after that checked to see
if the sort ordering was relevant. The EC/PK construction code is O(N^2)
in the number of ECs, which is all right for the intended number of such
objects, but it gets out of hand if there are ECs for lots of irrelevant
indexes.
To fix, twiddle the handling of mergeclauses a little bit to ensure that
every interesting EC is created before we begin path generation. (This
doesn't cost anything --- in fact I think it's a bit cheaper than before
--- since we always eventually created those ECs anyway.) Then, if an
index column can't be found in any pre-existing EC, we know that that sort
ordering is irrelevant for the query. Instead of creating a useless EC,
we can just not build a pathkey for the index column in the first place.
The index will still be considered if it's useful for non-order-related
reasons, but we will think of its output as unsorted.
The previous wording might have suggested that \du only showed login roles
and \dg only group roles, but that is no longer the case.
proposed by Josh Kupershmidt
Instead of using ExecPrepareExpr, call ExecInitExpr. The net change here
is that we don't apply expression_planner() to the expression tree. There
is no need to do so, because that tree is extracted from a fully planned
plancache entry, so all the needed work is already done. This reduces
the setup costs by about a factor of 2 according to some simple tests.
Oversight noted while fooling around with the simple-expression code for
previous fix.
In general, expression execution state trees aren't re-entrantly usable,
since functions can store private state information in them.
For efficiency reasons, plpgsql tries to cache and reuse state trees for
"simple" expressions. It can get away with that most of the time, but it
can fail if the state tree is dirty from a previous failed execution (as
in an example from Alvaro) or is being used recursively (as noted by me).
Fix by tracking whether a state tree is in use, and falling back to the
"non-simple" code path if so. This results in a pretty considerable speed
hit when the non-simple path is taken, but the available alternatives seem
even more unpleasant because they add overhead in the simple path. Per
idea from Heikki.
Back-patch to all supported branches.
Original patch failed to include new exclusive states in a switch that
needed to include them; and also was guilty of very fuzzy thinking
about how to handle error cases. Per bug #5729 from Alan Choi.
- Avoid closing stdin, since we didn't open it. Previously multiple
inclusions of stdin would be terminated with a single quit, now a separate
quit is needed for each invocation. Previous behavior also accessed stdin
after it was fclose()d, which is undefined behavior per ANSI C.
- Properly restore pset.inputfile, since the caller expects to be able
to free that memory.
Marti Raudsepp
that WAL file containing the checkpoint redo-location can be found. This
avoids making the cluster irrecoverable if the redo location is in an earlie
WAL file than the checkpoint record.
Report, analysis and patch by Jeff Davis, with small changes by me.
Split the old typenameTypeId() into two functions: A new typenameTypeId() that
returns only a type OID, and typenameTypeIdAndMod() that returns type OID and
typmod. This isolates call sites better that actually care about the typmod.
A NestLoopParam's value can only be a Var or Aggref, but this isn't the
case in general for SubPlan parameters, so print_parameter_expr had better
be prepared to cope. Brain fade in my recent patch to print the referenced
expression instead of just printing $N for PARAM_EXEC Params. Per report
from Pavel Stehule.
This avoids a possible crash when inlining a SRF whose argument list
contains a reference to an inline-able user function. The crash is quite
reproducible with CLOBBER_FREED_MEMORY enabled, but would be less certain
in a production build. Problem introduced in 9.0 by the named-arguments
patch, which requires invoking eval_const_expressions() before we can try
to inline a SRF. Per report from Brendan Jurd.
After much expenditure of effort, we've got this to the point where the
performance penalty is pretty minimal in typical cases.
Andrew Dunstan, reviewed by Brendan Jurd, Dean Rasheed, and Tom Lane
as a variable or column name, and it's not reserved in recent versions of
the SQL spec either. This became particularly annoying in 9.0, before that
PL/pgSQL replaced variable names in queries with parameter markers, so
it was possible to use OFF and many other backend parser keywords as
variable names. Because of that, backpatch to 9.0.
This patch eliminates various bizarre behaviors caused by sloppy thinking
about the difference between a domain type and its underlying array type.
In particular, the operation of updating one element of such an array
has to be considered as yielding a value of the underlying array type,
*not* a value of the domain, because there's no assurance that the
domain's CHECK constraints are still satisfied. If we're intending to
store the result back into a domain column, we have to re-cast to the
domain type so that constraints are re-checked.
For similar reasons, such a domain can't be blindly matched to an ANYARRAY
polymorphic parameter, because the polymorphic function is likely to apply
array-ish operations that could invalidate the domain constraints. For the
moment, we just forbid such matching. We might later wish to insert an
automatic downcast to the underlying array type, but such a change should
also change matching of domains to ANYELEMENT for consistency.
To ensure that all such logic is rechecked, this patch removes the original
hack of setting a domain's pg_type.typelem field to match its base type;
the typelem will always be zero instead. In those places where it's really
okay to look through the domain type with no other logic changes, use the
newly added get_base_element_type function in place of get_element_type.
catversion bumped due to change in pg_type contents.
Per bug #5717 from Richard Huxton and subsequent discussion.
outside a transaction.
This repairs brain fade in my patch of 2009-08-30: the reason we had been
storing oldest-database name, not OID, in ShmemVariableCache was of course
to avoid having to do a catalog lookup at times when it might be unsafe.
This error explains why Aleksandr Dushein is having trouble getting out of
an XID wraparound state in bug #5718, though not how he got into that state
in the first place. I suspect pg_upgrade is at fault there.
This call was present in the aboriginal code from Berkeley, and has
never been touched; it may very well be that it was there to mask
effects of bugs in other places and it may no longer be necessary.
The removal has been foreseen in a code comment since 2007; this seems
to be a good time to test this hypothesis.
The trick is to not try to build executables directly from .c files,
but to always build the intermediate .o files. For obscure reasons,
Darwin's version of gcc will leave debug cruft behind in the first
case but not the second. Per complaint from Robert Haas.
A couple of places in the planner need to generate whole-row Vars, and were
cutting corners by setting vartype = RECORDOID in the Vars, even in cases
where there's an identifiable named composite type for the RTE being
referenced. While we mostly got away with this, it failed when there was
also a parser-generated whole-row reference to the same RTE, because the
two Vars weren't equal() due to the difference in vartype. Fix by
providing a subroutine the planner can call to generate whole-row Vars
the same way the parser does.
Per bug #5716 from Andrew Tipton. Back-patch to 9.0 where one of the bogus
calls was introduced (the other one is new in HEAD).
The GIN code has absolutely no business exporting GIN-specific functions
with names as generic as compareItemPointers() or newScanKey(); that's
just trouble waiting to happen. I got annoyed about this again just now
and decided to fix it. This commit ensures that all global symbols
defined in access/gin/ have names including "gin" or "Gin". There were a
couple of cases, like names involving "PostingItem", where arguably the
names were already sufficiently nongeneric; but I figured as long as I was
risking creating merge problems for unapplied GIN patches I might as well
impose a uniform policy.
I didn't touch any static symbol names. There might be some places
where it'd be appropriate to rename some static functions to match
siblings that are exported, but I'll leave that for another time.
The better estimate requires more statistics than we previously stored:
in particular, counts of "entry" versus "data" pages within the index,
as well as knowledge of the number of distinct key values. We collect
this information during initial index build and update it during VACUUM,
storing the info in new fields on the index metapage. No initdb is
required because these fields will read as zeroes in a pre-existing
index, and the new gincostestimate code is coded to behave (reasonably)
sanely if they are zeroes.
Teodor Sigaev, reviewed by Jan Urbanski, Tom Lane, and Itagaki Takahiro.
Look only at the non-localized part of the output from "vcbuild /?",
which is used to determine the version of Visual Studio in use. Different
languages seem to localize different amounts of the string, but we assume
the part "Microsoft Visual C++" won't be modified.
This is not the hoped-for facility of using INSERT/UPDATE/DELETE inside
a WITH, but rather the other way around. It seems useful in its own
right anyway.
Note: catversion bumped because, although the contents of stored rules
might look compatible, there's actually a subtle semantic change.
A single Query containing a WITH and INSERT...VALUES now represents
writing the WITH before the INSERT, not before the VALUES. While it's
not clear that that matters to anyone, it seems like a good idea to
have it cited in the git history for catversion.h.
Original patch by Marko Tiikkaja, with updating and cleanup by
Hitoshi Harada.
Corrupt RADIUS responses were treated as errors and not ignored
(which the RFC2865 states they should be). This meant that a
user with unfiltered access to the network of the PostgreSQL
or RADIUS server could send a spoofed RADIUS response
to the PostgreSQL server causing it to reject a valid login,
provided the attacker could also guess (or brute-force) the
correct port number.
Fix is to simply retry the receive in a loop until the timeout
has expired or a valid (signed by the correct RADIUS server)
packet arrives.
Reported by Alan DeKok in bug #5687.
This patch eliminates the former need to sort the output of an Append scan
when an ordered scan of an inheritance tree is wanted. This should be
particularly useful for fast-start cases such as queries with LIMIT.
Original patch by Greg Stark, with further hacking by Hans-Jurgen Schonig,
Robert Haas, and Tom Lane.
xgettext is only required when make init-po is run manually; it is not
required for a build. The intent to handle that was already there, but
the ifdef's were in the wrong place.
ecpglib. Instead of parsing the statement just as ask the database server. This
patch removes the whole client side track keeping of the current transaction
status.
to see if a particular privilege has been granted to PUBLIC.
The issue was reported by Jim Nasby.
Patch by Alvaro Herrera, and reviewed by KaiGai Kohei.
We may as well make pgstat_count_heap_scan() and related macros just count
whenever rel->pgstat_info isn't null. Testing pgstat_track_counts buys
nothing at all in the normal case where that flag is ON; and when it's OFF,
the pgstat_info link will be null, so it's still a useless test.
This change is unlikely to buy any noticeable performance improvement,
but a cycle shaved is a cycle earned; and my investigations earlier today
convinced me that we're down to the point where individual instructions in
the inner execution loops are starting to matter.
The original coding was quite sloppy about handling the case where
XLogReadBuffer fails (because the page has since been deleted). This
would result in either "bad buffer id: 0" or an Assert failure during
replay, if indeed the page were no longer there. In a couple of places
it also neglected to check whether the change had already been applied,
which would probably result in corrupted index contents. I believe that
bug #5703 is an instance of the first problem. These issues could show up
without replication, but only if you were unfortunate enough to crash
between modification of a GIN index and the next checkpoint.
Back-patch to 8.2, which is as far back as GIN has WAL support.
This patch merges the responsibility for NOT-flattening into
eval_const_expressions' processing. It wasn't done that way originally
because prepqual.c is far older than eval_const_expressions. But putting
this work into eval_const_expressions saves one pass over the qual trees,
and in fact saves even more than that because we can exploit the knowledge
that the subexpressions have already been recursively simplified. Doing it
this way also lets us do it uniformly over all expressions, whereas
prepqual.c formerly just did it at top level to save cycles. That should
improve the planner's ability to recognize logically-equivalent constructs.
While at it, also add the ability to fold a NOT into BooleanTest and
NullTest constructs (the latter only for the scalar-datatype case).
Per discussion of bug #5702.
Completion is supported in the context of \set and when interpolating
a variable value using :foo etc.
In passing, fix some places in tab-complete.c that weren't following
project style for comment formatting.
Pavel Stehule, reviewed by Itagaki Takahiro
This patch adds the SQL-standard concept of an INSTEAD OF trigger, which
is fired instead of performing a physical insert/update/delete. The
trigger function is passed the entire old and/or new rows of the view,
and must figure out what to do to the underlying tables to implement
the update. So this feature can be used to implement updatable views
using trigger programming style rather than rule hacking.
In passing, this patch corrects the names of some columns in the
information_schema.triggers view. It seems the SQL committee renamed
them somewhere between SQL:99 and SQL:2003.
Dean Rasheed, reviewed by Bernd Helmle; some additional hacking by me.
Various places were testing TRIGGER_FIRED_BEFORE() where what they really
meant was !TRIGGER_FIRED_AFTER(), or vice versa. This needs to be cleaned
up because there are about to be more than two possible states.
We might want to note this in the 9.1 release notes as something for
trigger authors to double-check.
For consistency's sake I also changed some places that assumed that
TRIGGER_FIRED_FOR_ROW and TRIGGER_FIRED_FOR_STATEMENT are necessarily
mutually exclusive; that's not in immediate danger of breaking, but
it's still sloppier than it should be.
Extracted from Dean Rasheed's patch for triggers on views. I'm committing
this separately since it's an identifiable separate issue, and is the
only reason for the patch to touch most of these particular files.
This patch resurrects some of the information that could be logged by the
old, now-dead implementation of VACUUM FULL, in particular counts of live
and dead tuples and the time taken for the table rebuild proper. There's
still no logging about the ensuing index rebuilds, though.
Itagaki Takahiro
Use a macro LogicalTapeReadExact() to encapsulate the error check when
we want to read an exact number of bytes from a "tape". Per a suggestion
of Takahiro Itagaki.
This patch eliminates per-chunk palloc overhead for most small allocations
needed in the representation of an ispell dictionary. This saves close to
a factor of 2 on the current Czech ispell data. While it doesn't cover
every last small allocation in the ispell code, we are at the point of
diminishing returns, because about 95% of the allocations are covered
already.
Pavel Stehule, rather heavily revised by Tom
Add explicit initialization and cleanup functions to spell.c, and keep
all working state in the already-existing ISpellDict struct. This lets us
get rid of a static variable along with some extremely shaky assumptions
about usage of child memory contexts.
This commit is just code beautification and has no impact on functionality
or performance, but it opens the way to a less-grotty implementation of
Pavel's memory-saving hack, which will follow shortly.
In versions 8.2 and up, the grammar allows attaching ORDER BY, LIMIT,
FOR UPDATE, or WITH to VALUES, and hence to INSERT ... VALUES. But the
special-case code for VALUES in transformInsertStmt() wasn't expecting any
of those, and just ignored them, leading to unexpected results. Rather
than complicate the special-case path, just ensure that the presence of any
of those clauses makes us treat the query as if it had a general SELECT.
Per report from Hitoshi Harada.
Actually making this case work, if the column is used in the trigger's
WHEN condition, will take some new code that probably isn't appropriate
to back-patch. For now, just throw a FEATURE_NOT_SUPPORTED error rather
than allowing control to reach the "unexpected object" case. Per bug #5688
from Daniel Grace. Back-patch to 9.0 where the possibility of such a
dependency was introduced.
There are numerous methods by which a Perl or Tcl function can subvert
the behavior of another such function executed later; for example, by
redefining standard functions or operators called by the target function.
If the target function is SECURITY DEFINER, or is called by such a
function, this means that any ordinary SQL user with Perl or Tcl language
usage rights can do essentially anything with the privileges of the target
function's owner.
To close this security hole, create a separate Perl or Tcl interpreter for
each SQL userid under which plperl or pltcl functions are executed within
a session. However, all plperlu or pltclu functions run within a session
still share a single interpreter, since they all execute at the trust
level of a database superuser anyway.
Note: this change results in a functionality loss when libperl has been
built without the "multiplicity" option: it's no longer possible to call
plperl functions under different userids in one session, since such a
libperl can't support multiple interpreters in one process. However, such
a libperl already failed to support concurrent use of plperl and plperlu,
so it's likely that few people use such versions with Postgres.
Security: CVE-2010-3433
The point of a PlaceHolderVar is to allow a non-strict expression to be
evaluated below an outer join, after which its value bubbles up like a Var
and can be forced to NULL when the outer join's semantics require that.
However, there was a serious design oversight in that, namely that we
didn't ensure that there was actually a correct place in the plan tree
to evaluate the placeholder :-(. It may be necessary to delay evaluation
of an outer join to ensure that a placeholder that should be evaluated
below the join can be evaluated there. Per recent bug report from Kirill
Simonov.
Back-patch to 8.4 where the PlaceHolderVar mechanism was introduced.
This is intended as infrastructure to support integration with label-based
mandatory access control systems such as SE-Linux. Further changes (mostly
hooks) will be needed, but this is a big chunk of it.
KaiGai Kohei and Robert Haas
1. Resurrect the behavior where old commits on master will have Branch:
labels for branches sprouted after the commit was made. I'm still
dubious about this mode, but if you want it, say --post-date or -p.
2. Annotate the Branch: labels with the release or branch in which the
commit was publicly released. For example, on a release branch you could
see
Branch: REL8_3_STABLE Release: REL8_3_2 [92c3a8004] 2008-03-29 00:15:37 +0000
showing that the fix was released in 8.3.2. Commits on master will
usually instead have notes like
Branch: master Release: REL8_4_BR [6fc9d4272] 2008-03-29 00:15:28 +0000
showing that this commit is ancestral to release branches 8.4 and later.
If no Release: marker appears, the commit hasn't yet made it into any
release.
3. Add support for release branches older than 7.4.
4. The implementation is improved by running git log on each branch only
back to where the branch sprouts from master. This saves a good deal
of time (about 50% of the runtime when generating the complete history).
We generate the post-date-mode tags via a direct understanding that
they should be applied to master commits made before the branch sprouted,
rather than backing into them via matching (which isn't any too
reliable when people used identical log messages for successive commits).
1. Don't assume there's only one candidate match; check them all and use the
one with the closest timestamp. Avoids funny output when someone makes
several successive commits with the same log message, as certain people
have been known to do.
2. When the same commit (with the same SHA1) is reachable from multiple
branch tips, don't report it for all the branches; instead report it only
for the first such branch. Given our development practices, this case
arises only for commits that occurred before a given branch split off from
master. The original coding blamed old commits on *all* the branches,
which isn't terribly useful; the new coding blames such a commit only on
master.
1. Don't forget the last (oldest) commit on the oldest branch.
2. When considering which commit to print next, if two alternatives have
the same "distortion" score (which is actually the normal case, since
generally the "distortion" is 0), then choose the later timestamp to
print first. I don't know where Robert got the idea to ignore timestamps
and sort by branch age, but it wasn't a good idea: the resulting ordering
of commits was just plain bizarre anywhere that some branches had many
fewer commits than others, which is the typical situation for us.
Avoid depending on Date::Calc, which isn't in a basic Perl installation,
when we can equally well use Time::Local which is. Also fix the parsing
of timestamps to take heed of the timezone. (It looks like cvs2git emitted
all commit timestamps with zone GMT, so this refinement might've looked
unnecessary when looking at converted data; but it's needed now.)
Fix parsing of message bodies so that blank lines that may or may not get
emitted by "git log" aren't confused with real data. This avoids strange
formatting of the oldest commit on a branch.
Check child-process exit status, so that we actually notice if "git log"
fails, and so that we don't accumulate zombie children.
The previous coding would decide that join removal was unsafe upon finding
a PlaceHolderVar that needed to be evaluated at the inner rel and then used
above the join. However, this fails to cover the case of PlaceHolderVars
that refer to both the inner rel and some other rels. Per bug report from
Andrus.
hasn't been set.
The only known case where this can happen is when show_session_authorization
is invoked in an autovacuum process, which is possible if an index function
calls it, as for example in bug #5669 from Andrew Geery. We could perhaps
try to return a sensible value, such as the name of the cluster-owning
superuser; but that seems like much more trouble than the case is worth,
and in any case it could create new possible failure modes. Simply
returning an empty string seems like the most appropriate fix.
Back-patch to all supported versions, even those before autovacuum, just
in case there's another way to provoke this crash.
In some situations the original coding led to corrupting the child AppendRel's
subpaths list, effectively adding other members of the parent's list to it.
This was usually masked because we never made any further use of the child's
list, but given the right combination of circumstances, we could do so. The
visible symptom would be a relation getting scanned twice, as in bug #5673
from David Schmitt.
Backpatch to 8.2, which is as far back as the risky coding appears. The
example submitted by David only fails in 8.4 and later, but I'm not convinced
that there aren't any even-more-obscure cases where 8.2 and 8.3 would fail.
We can't actually print the parent RelOptInfo in toto, because that would
lead to infinite recursion. But it's safe enough to reach into the parent
and print its identifying relids, and that makes it a whole lot easier
to figure out what a Path represents. Should have done this years ago.
servers. AFAICT it's harmless at the moment because nothing can depend on
either, but as soon as we introduce an object type with such dependencies,
tableoid needs to be set or pg_dump will fail to interpret the dependencies
correctly. In theory, I guess the uninitialized garbage in tableoid could
cause the object to be mistaken for some other object with same OID as well.
This was unintentionally broken in 8.4 while tightening up checking of
ordinary non-Julian date inputs to forbid references to "year zero".
Per bug #5672 from Benjamin Gigot.
The previous patches failed to cover a lot of symlinks that are only
added in platform-specific cases. Make the lists match what's in the
Makefile for each branch.
Poking around for remaining occurrences of CVS keyword strings, I came
across one that apparently reflects the use of a $Revision: ...$ string
in the original input data. Dunno why anybody would be using that in
an MTA's Received: lines, but there it is. Put it back to the way that
it was originally, according to inspection of the CVS repo.
This script is intended to substitute for cvs2cl in generating release
notes and scrutinizing what got back-patched to which branches.
Script by me. Support for --since by Alex Hunsaker.
The previous coding just terminated the COPY immediately after seeing
the EOF marker (-1 where a row field count is expected). The expected
CopyDone or CopyFail message just got thrown away later, since we weren't
in COPY mode anymore. This behavior complicated matters for the JDBC
driver, and arguably was the wrong thing in any case since a CopyFail
message after the marker wouldn't be honored.
Note that there is a behavioral change here: extra data after the EOF
marker was silently ignored before, but now it will cause an error.
Hence not back-patching, although this is arguably a bug.
Per report and patch by Kris Jurka.
the same number of columns expected by the insert. This suggests that there
were extra parentheses that converted the intended column list into a row
expression.
Original patch by Marko Tiikkaja, rather heavily editorialized by me.
since it can happen when a process fails to start when the system
is under high load.
Per several bug reports and many peoples investigation.
Back-patch to 8.4, which is as far back as the "deadman-switch"
for shared memory access exists.
new WAL arrives via streaming replication. This reduces the latency, and
also allows us to use a longer polling interval, which is good for energy
efficiency.
We still need to poll to check for the appearance of a trigger file, but
the interval is now 5 seconds (instead of 100ms), like when waiting for
a new WAL segment to appear in WAL archive.
dynamic pool of event handles, we can permanently assign one for each
shared latch. Thanks to that, we no longer need a separate shared memory
block for latches, and we don't need to know in advance how many shared
latches there is, so you no longer need to remember to update
NumSharedLatches when you introduce a new latch to the system.
In these cases a qual can get marked with the removable rel in its
required_relids, but this is just to schedule its evaluation correctly, not
because it really depends on the rel. We were assuming that, in effect,
we could throw away *all* quals so marked, which is nonsense. Tighten up
the logic to be a little more paranoid about which quals belong to the
outer join being considered for removal, and arrange for all quals that
don't belong to be updated so they will still get evaluated correctly.
Also fix another problem that happened to be exposed by this test case,
which was that make_join_rel() was failing to notice some cases where
a constant-false qual could be used to prove a join relation empty. If it's
a pushed-down constant false, then the relation is empty even if it's an
outer join, because the qual applies after the outer join expansion.
Per report from Nathan Grange. Back-patch into 9.0.
an online backup instead of performing one. pg_ctl can detect that by
checking if recovery.conf exists.
Backup label file is renamed away early in recovery, so the window where
backup label exists during recovery is normally very small, but you can run
into it e.g if restore_command is set incorrectly and the startup process
never finds even the first WAL segment containing the checkpoint record to
start recovery from.
Fujii Masao with comments by me.
make sense for walsender, but for example application_name and client_encoding
do. We still don't apply per-role settings from pg_db_role_setting, because
that would require connecting to a database to read the table.
Fujii Masao
transaction snapshots, i.e. a snapshot registered at the beginning of
a transaction. Change variable naming and comments to reflect this reality
in preparation for a future, truly serializable mode, e.g.
Serializable Snapshot Isolation (SSI).
For the moment transaction snapshots are still used to implement
SERIALIZABLE, but hopefully not for too much longer. Patch by Kevin
Grittner and Dan Ports with review and some minor wording changes by me.
wait until it is set. Latches can be used to reliably wait until a signal
arrives, which is hard otherwise because signals don't interrupt select()
on some platforms, and even when they do, there's race conditions.
On Unix, latches use the so called self-pipe trick under the covers to
implement the sleep until the latch is set, without race conditions. On
Windows, Windows events are used.
Use the new latch abstraction to sleep in walsender, so that as soon as
a transaction finishes, walsender is woken up to immediately send the WAL
to the standby. This reduces the latency between master and standby, which
is good.
Preliminary work by Fujii Masao. The latch implementation is by me, with
helpful comments from many people.
Peter's original patch had this right, but I dropped the check while revising
the code to search pg_constraint instead of pg_index. Spotted by Dean Rasheed.
A long time ago, this didn't work nicely, but it seems to work on all recent
versions of OS X. The blank-pad method is less desirable since it results
in lots of extra space in ps' output. Per Alexey Klyukin.
Since the code underlying pg_get_expr() is not secure against malformed
input, and can't practically be made so, we need to prevent miscreants
from feeding arbitrary data to it. We can do this securely by declaring
pg_get_expr() to take a new datatype "pg_node_tree" and declaring the
system catalog columns that hold nodeToString output to be of that type.
There is no way at SQL level to create a non-null value of type pg_node_tree.
Since the backend-internal operations that fill those catalog columns
operate below the SQL level, they are oblivious to the datatype relabeling
and don't need any changes.
SI invalidation events, rather than indirectly through the relcache.
In the previous coding, we had to flush a composite-type typcache entry
whenever we discarded the corresponding relcache entry. This caused problems
at least when testing with RELCACHE_FORCE_RELEASE, as shown in recent report
from Jeff Davis, and might result in real-world problems given the kind of
unexpected relcache flush that that test mechanism is intended to model.
The new coding decouples relcache and typcache management, which is a good
thing anyway from a structural perspective. The cost is that we have to
search the typcache linearly to find entries that need to be flushed. There
are a couple of ways we could avoid that, but at the moment it's not clear
it's worth any extra trouble, because the typcache contains very few entries
in typical operation.
Back-patch to 8.2, the same as some other recent fixes in this general area.
The patch could be carried back to 8.0 with some additional work, but given
that it's only hypothetical whether we're fixing any problem observable in
the field, it doesn't seem worth the work now.
initialize the rd_backend field of a fake Relation entry correctly.
Fortunately, that is easy, since only non-temp relations should ever be
mentioned in the WAL stream.
This patch changes _bt_split() and _bt_pagedel() to throw a plain ERROR,
rather than PANIC, for several cases that are reported from the field
from time to time:
* right sibling's left-link doesn't match;
* PageAddItem failure during _bt_split();
* parent page's next child isn't right sibling during _bt_pagedel().
In addition the error messages for these cases have been made a bit
more verbose, with additional values included.
The original motivation for PANIC here was to capture core dumps for
subsequent analysis. But with so many users whose platforms don't capture
core dumps by default, or who are unprepared to analyze them anyway, it's hard
to justify a forced database restart when we can fairly easily detect the
problems before we've reached the critical sections where PANIC would be
necessary. It is not currently known whether the reports of these messages
indicate well-hidden bugs in Postgres, or are a result of storage-level
malfeasance; the latter possibility suggests that we ought to try to be more
robust even if there is a bug here that's ultimately found.
Backpatch to 8.2. The code before that is sufficiently different that
it doesn't seem worth the trouble to back-port further.
Peter Eisentraut reports that some bits of the "address" variable
in get_object_address() give "may be used uninitialized" warnings;
this likes the only excuse his compiler could have for thinking
that's possible.
which is perhaps not a terribly good spot for it but there doesn't seem to be
a better place. Also add a source-code comment pointing out a couple reasons
for having a separate lock file. Per suggestion from Greg Smith.
Egypt and Palestine. Added new names for two Micronesian timezones:
Pacific/Chuuk is now preferred over Pacific/Truk (and the preferred
abbreviation is CHUT not TRUT) and Pacific/Pohnpei is preferred over
Pacific/Ponape. Historical corrections for Finland.
returning "record" actually do have the same rowtype. This is needed because
the parser can't realistically enforce that they will all have the same typmod,
as seen in a recent example from David Wheeler.
Back-patch to 8.0, which is as far back as we have the notion of RECORD
subtypes being distinguished by typmod. Wheeler's example depends on
8.4-and-up features, but I suspect there may be ways to provoke similar
failures before 8.4.
It turns out that some platforms return ENOMEM for a request that violates
SHMALL, whereas we were assuming that ENOSPC would always be used for that.
Apparently the latter is a Linuxism while ENOMEM is the BSD tradition.
Extend the ENOMEM hint to suggest that raising SHMALL might be needed.
Per gripe from A.M.
Backpatch to 9.0, but not further, because this doesn't seem important
enough to warrant creating extra translation work in the stable branches.
(If it were, we'd have figured this out years ago.)
This is reproducibly possible in Python 2.7 if the user turned
PendingDeprecationWarning into an error, but it's theoretically also possible
in earlier versions in case of exceptional conditions.
backpatched to 8.0
files automatically. Otherwise, the following could happen: When
starting from a clean source tree, the first build would delete the
intermediate file, but also create the dependency file, which
mentions the intermediate file, thus making it non-intermediate.
The second build will then need to rebuild the now non-intermediate
missing file. So the second build will do work even though nothing
had changed. One place where this happens is the .c -> .o -> .so
chain for some contrib modules.
There is no reason that proc.c should have to get involved in this dirty hack
for letting the postmaster know which children are walsenders. Revert that
file to the way it was, and confine the kluge to pmsignal.c and postmaster.c.
array_in discards unquoted leading and trailing whitespace in array values,
while array_out is careful to quote array elements that contain whitespace.
This is problematic when the definition of "whitespace" varies between
locales: array_in could drop characters that were meant to be part of the
value. To avoid that, lock down "whitespace" to mean only the traditional
six ASCII space characters.
This change also works around a bug in OS X and some older BSD systems, in
which isspace() could return true for character fragments in UTF8 locales.
(There may be other places in PG where that bug could cause problems, but
this is the only one complained of so far; see recent report from Steven
Schlansker.)
Back-patch to 9.0, but not further. Given the lack of previous reports
of trouble, changing this behavior in stable branches seems to offer
more risk of breaking applications than reward of avoiding problems.
The original coding tended to break down in the face of modified restore
orders, as shown in bug #5626 from Albert Ullrich, because it would flip over
into parallel-restore operation too soon. That causes problems because we
don't have sufficient dependency information in dump archives to allow safe
parallel processing of SECTION_PRE_DATA items. Even if we did, it's probably
undesirable to allow that to override the commanded restore order.
To fix the problem of omitted items causing unexpected changes in restore
order, tweak SortTocFromFile so that omitted items end up at the head of
the list not the tail. This ensures that they'll be examined and their
dependencies will be marked satisfied before we get to any interesting
items.
In HEAD and 9.0, we can easily change restore_toc_entries_parallel so that
all SECTION_PRE_DATA items are guaranteed to be processed in the initial
serial-restore loop, and hence in commanded order. Only DATA and POST_DATA
items are candidates for parallel processing. For them there might be
variations from the commanded order because of parallelism, but we should
do it in a safe order thanks to dependencies.
In 8.4 it's much harder to make such a guarantee. I settled for not
letting the initial loop break out into parallel processing mode if
it sees a DATA/POST_DATA item that's not to be restored; this at least
prevents a non-restorable item from causing premature exit from the loop.
This means that 8.4 will be more likely to fail given a badly-ordered -L
list than 9.x, but we don't really promise any such thing will work anyway.
Since an SMgrRelation now knows whether or not the underlying relation is
temporary, there's no point in also passing that information via an
additional argument.
Per gripe from Fujii Masao, though this is not exactly his proposed patch.
Categorize as DEVELOPER_OPTIONS and set context PGC_SIGHUP, as per Fujii,
but set the default to LOG because higher values aren't really sensible
(see the code for trace_recovery()). Fix the documentation to agree with
the code and to try to explain what the variable actually does. Get rid
of no-op calls trace_recovery(LOG), which accomplish nothing except to
demonstrate that this option confuses even its author.
Aside from being more forgiving, this prevents a rather surprising misbehavior
when the "wrong" order was used: the old code didn't throw a syntax error,
but absorbed the INTO clause into the last USING expression, which then did
strange things downstream.
Intentionally not changing the documentation; we'll continue to advertise
only the "standard" clause order.
Backpatch to 8.4, where the USING clause was added to EXECUTE.
It's not clear if this situation can occur in plpgsql other than via the
EXECUTE USING case Heikki illustrated, which I will shortly close off.
However, ignoring the intoClause if it's there is surely wrong, so let's
patch it for safety.
Backpatch to 8.3, which is as far back as this code has a PlannedStmt
to deal with. There might be another way to make an equivalent test
before that, but since this is just preventing hypothetical bugs,
I'm not going to obsess about it.
pointed out, it would need a 2nd pass after the whole query is processed to
correctly check that an unknown Param is coerced to the same target type
everywhere. Adding the 2nd pass would add a lot more code, which doesn't
seem worth the risk given that there isn't much of a use case for passing
unknown Params in the first place. The code would work without that check,
but it might be confusing and the behavior would be different from the
varparams case.
Instead, just coerce all unknown params in a PL/pgSQL USING clause to text.
That's simple, and is usually what users expect.
Revert the patch in CVS HEAD and master, and backpatch the new solution to
8.4. Unlike the previous solution, this applies easily to 8.4 too.
into TopMemoryContext. This makes no functional difference, but makes it
easier to see what the space is being used for in MemoryContextStats dumps.
Per a recent example in which I was surprised by the size of TopMemoryContext.
afterTriggerInvokeEvents failed to adjust events->tailfree when truncating
the last chunk of an event list. This could result in the data being
"de-truncated" by afterTriggerRestoreEventList during a subsequent
subtransaction abort. Even that wouldn't kill us, because the re-added data
would just be events marked DONE --- unless the data had been partially
overwritten by new events. Then we might crash, or in any case misbehave
(perhaps fire triggers twice, or fire triggers with the wrong event data).
Per bug #5622 from Thue Janus Kristensen.
Back-patch to 8.4 where the current trigger list representation was introduced.
In the new API introduced by my patch to include the backend ID in
temprel filenames, the last argument to smrgextend() became skipFsync
rather than isTemp, but these calls didn't get the memo. It's not
really a problem to pass rel->rd_istemp rather than just plain false,
because smgrextend() now automatically skips the fsync for temprels
anyway, but this seems cleaner and saves some minute number of cycles.
ExecModifyTable(). This avoids memory leakage when trigger functions leave
junk behind in that context (as they more or less must). Problem and solution
identified by Dean Rasheed.
I'm a bit concerned about the longevity of this solution --- once a plan can
have multiple ModifyTable nodes, we are very possibly going to have to do
something different. But it should hold up for 9.0.
elsewhere.
Similarly rename the version in mbprint.c, not because this affects anything
but just to keep the two copies in exact sync. There was some discussion of
having only one copy in src/port/ instead, but this function is so small
and unlikely to change that that seems like overkill.
Slightly editorialized version of a patch by Joseph Adams. (The bug-fix
aspect of his patch was applied separately, and back-patched.)
The implicitly created sequence was created as owned by the current user,
who could be different from the table owner, eg if current user is a
superuser or some member of the table's owning role. This caused sanity
checks in the SEQUENCE OWNED BY code to spit up. Although possibly we
don't need those sanity checks, the safest fix seems to be to make sure
the implicit sequence is assigned the same owner role as the table has.
(We still do all permissions checks as the current user, however.)
Per report from Josh Berkus.
Back-patch to 9.0. The bug goes back to the invention of SEQUENCE OWNED BY
in 8.2, but the fix requires an API change for DefineRelation(), which seems
to have potential for breaking third-party code if done in a minor release.
Given the lack of prior complaints, it's probably not worth fixing in the
stable branches.
_outPlannedStmt is only debug support, so the omission there was not very
serious, but the omission in _copyPlannedStmt is a real bug. The consequence
would be that a copied plan tree would never be marked as a transient plan,
so that we would forget we ought to replan it after some not-yet-ready index
becomes ready for use. This might explain some past complaints about indexes
created with CREATE INDEX CONCURRENTLY not being used right away. Problem
spotted by Yeb Havinga.
Back-patch to 8.3, where the field was added.
parse_analyze() function. That case occurs e.g with PL/pgSQL
EXECUTE ... USING 'stringconstant'.
The coercion with a CoerceViaIO node. The result is similar to the coercion
via input function performed for unknown constants in coerce_type(),
except that this happens at runtime.
Backpatch to 9.0. The issue is present in 8.4 as well, but the coerce param
hook infrastructure this patch relies on was introduced in 9.0. Given the
lack of user reports and harmlessness of the bug, it's not worth attempting
a different fix just for 8.4.
socket lockfile) when writing them. The lack of an fsync here may well
explain two different reports we've seen of corrupted lockfile contents,
which doesn't particularly bother the running server but can prevent a
new server from starting if the old one crashes. Per suggestion from
Alvaro.
Back-patch to all supported versions.
This is appropriate for the same reasons we already do it in
LockSharedObject(): things might have changed while we were waiting
for the lock. There doesn't seem to be a live bug here at the moment,
but that's mostly because it isn't currently used for very much.
in particular, propagate a fix in the test to see whether a UTF8 character has
length 4 bytes. This is likely of little real-world consequence because
5-or-more-byte UTF8 sequences are not supported by Postgres nor seen anywhere
in the wild, but still we may as well get it right. Problem found by Joseph
Adams.
Bug is aboriginal, so back-patch all the way.
used by array_agg(), string_agg(), and similar aggregate functions that use
"internal" as their transition datatype. The previous coding thought this
took *no* extra space, since "internal" is pass-by-value; but actually these
aggregates typically consume a great deal of space. Per bug #5608 from
Itagaki Takahiro, and fix suggestion from Hitoshi Harada.
Back-patch to 8.4, where array_agg was introduced.
This allows us to reliably remove all leftover temporary relation
files on cluster startup without reference to system catalogs or WAL;
therefore, we no longer include temporary relations in XLOG_XACT_COMMIT
and XLOG_XACT_ABORT WAL records.
Since these changes require including a backend ID in each
SharedInvalSmgrMsg, the size of the SharedInvalidationMessage.id
field has been reduced from two bytes to one, and the maximum number
of connections has been reduced from INT_MAX / 4 to 2^23-1. It would
be possible to remove these restrictions by increasing the size of
SharedInvalidationMessage by 4 bytes, but right now that doesn't seem
like a good trade-off.
Review by Jaime Casanova and Tom Lane.
I just noticed that libpq's pqsignal.h was violating our general inclusion
style guidelines by explicitly including postgres_fe.h. Remove that, and
put it in pqsignal.c where it belongs.
functions to the core XML code. Per discussion, the former depends on
XMLOPTION while the others do not. These supersede a version previously
offered by contrib/xml2.
Mike Fowler, reviewed by Pavel Stehule
path that specifies useTemp, but there is no active temp schema in the
current session. (This can happen if the path was saved during a transaction
that created a temp schema and was later rolled back.) For existing callers
it's sufficient to ignore the useTemp flag in this case, though we might
later want to offer an option to create a fresh temp schema. So far as I can
tell this is just an Assert failure: in a non-assert build, the code would
push a zero onto the new search path, which is useless but not very harmful.
Per bug report from Heikki.
Back-patch to 8.3; prior versions don't have this code.
Since the only purpose of WAL-loggin SharedInvalidationMessages is to support
Hot Standby operation, they needn't be included when wal_level < hot_standby.
Back-patch to 9.0.
Review by Heikki Linnakanagas and Fujii Masao.
and input file name, per bug #5617 from Leo Shklovskii. Rearrange the
corresponding code in pg_dump and pg_dumpall so that all three programs
handle this in a consistent, straightforward fashion.
Back-patch to 9.0, but no further. Although this is certainly a bug, it's
possible that people have scripts that will be broken by the added error
check, so it seems better not to change the behavior in stable branches.
and the editor's cursor will be initially placed on that line. In \e the
lines are counted with respect to the query buffer, while in \ef they are
counted with line 1 = first line of function body. These choices are useful
for positioning the cursor on the line of a previously-reported error.
To avoid assumptions about what switch the user's editor takes for this
purpose, invent a new psql variable EDITOR_LINENUMBER_SWITCH with (at
present) no default value.
One incompatibility from previous behavior is that "\e 1234" will now
take "1234" as a line number not a file name. There are at least two
ways to select a numerically-named file if you really want to.
Pavel Stehule, reviewed by Jan Urbanski, with further editing by Robert Haas
and Tom Lane
better handling of NULL elements within the arrays. The third parameter
is a string that should be used to represent a NULL element, or should
be translated into a NULL element, respectively. If the third parameter
is NULL it behaves the same as the two-parameter form.
There are two incompatible changes in the behavior of the two-parameter form
of string_to_array. First, it will return an empty (zero-element) array
rather than NULL when the input string is of zero length. Second, if the
field separator is NULL, the function splits the string into individual
characters, rather than returning NULL as before. These two changes make
this form fully compatible with the behavior of the new three-parameter form.
Pavel Stehule, reviewed by Brendan Jurd
expressions. We need to deal with this when handling subscripts in an array
assignment, and also when catching an exception. In an Assert-enabled build
these omissions led to Assert failures, but I think in a normal build the
only consequence would be short-term memory leakage; which may explain why
this wasn't reported from the field long ago.
Back-patch to all supported versions. 7.4 doesn't have exceptions, but
otherwise these bugs go all the way back.
Heikki Linnakangas and Tom Lane
can be caught in the same places that could catch an ordinary RAISE ERROR
in the same location. The previous coding insisted on throwing the error
from the block containing the active exception handler; which is arguably
more surprising, and definitely unlike Oracle's behavior.
Not back-patching, since this is a pretty obscure corner case. The risk
of breaking somebody's code in a minor version update seems to outweigh
any possible benefit.
Piyush Newe, reviewed by David Fetter
statistics counts. These numbers are being accumulated but haven't yet been
transmitted to the collector (and won't be, until the transaction ends).
For some purposes, though, it's handy to be able to look at them.
Joel Jacobson, reviewed by Itagaki Takahiro
other columns to be referenced without listing them in GROUP BY, so long as
the primary key column(s) are listed in GROUP BY.
Eventually we should also allow functional dependency on a UNIQUE constraint
when the columns are marked NOT NULL, but that has to wait until NOT NULL
constraints are represented in pg_constraint, because we need to have
pg_constraint OIDs for all the conditions needed to ensure functional
dependency.
Peter Eisentraut, reviewed by Alex Hunsaker and Tom Lane
matching a call like f(x, ORDER BY y,z). It could be that what the user
really wants is f(x,z ORDER BY y). We now have pretty conclusive evidence
that many people won't understand this problem without concrete guidance,
so give it to them. Per further discussion of the string_agg() problem.
functionality, while creating an ambiguity in usage with ORDER BY that at
least two people have already gotten seriously confused by. Also, add an
opr_sanity test to check that we don't in future violate the newly minted
policy of not having built-in aggregates with the same name and different
numbers of parameters. Per discussion of a complaint from Thom Brown.
- Rename TSParserGetPrsid to get_ts_parser_oid.
- Rename TSDictionaryGetDictid to get_ts_dict_oid.
- Rename TSTemplateGetTmplid to get_ts_template_oid.
- Rename TSConfigGetCfgid to get_ts_config_oid.
- Rename FindConversionByName to get_conversion_oid.
- Rename GetConstraintName to get_constraint_oid.
- Add new functions get_opclass_oid, get_opfamily_oid, get_rewrite_oid,
get_rewrite_oid_without_relid, get_trigger_oid, and get_cast_oid.
The name of each function matches the corresponding catalog.
Thanks to KaiGai Kohei for the review.
unqualified names.
- Add a missing_ok parameter to get_tablespace_oid.
- Avoid duplicating get_tablespace_od guts in objectNamesToOids.
- Add a missing_ok parameter to get_database_oid.
- Replace get_roleid and get_role_checked with get_role_oid.
- Add get_namespace_oid, get_language_oid, get_am_oid.
- Refactor existing code to use new interfaces.
Thanks to KaiGai Kohei for the review.
The old computation can sometimes underestimate the necessary space
by 2 bytes; however we're not back-patching this, because this result
isn't used for anything critical. Per discussion with Tom Lane,
make the typmod test in this function match the ones in numeric()
and apply_typmod() exactly.
the parameters of \connect, and fix oversight of not enabling translation
of the messages. Also, adjust \connect's similar messages to match, and
deal with 8.2-era violation of basic translatability guidelines there.
implementation deficiencies. Per discussion of bug #5592, we're not
going to change it, but these things should be documented so that if
anyone ever reimplements type tinterval, they will be more careful.
Without this patch, constraints inherited by children of a parent
table which itself has multiple inheritance parents can end up with
the wrong coninhcount. After dropping the constraint, the children
end up with a leftover copy of the constraint that is not dumped
and cannot be dropped. There is a similar problem with ALTER TABLE
.. ADD COLUMN, but that looks significantly more difficult to
resolve, so I'm committing this fix separately.
Back-patch to 8.4, which is the first release that has coninhcount.
Report by Hank Enting.
makeTSQuerySign. The first of these is a live bug, on some platforms,
as per bug #5590 from John Regehr. However the consequences seem limited
because of the relatively narrow scope of use of QTNode.sign. The shift in
makeTSQuerySign is actually safe because TSQS_SIGLEN is unsigned, but it
seems like a good idea to insert an explicit cast rather than depend on that.
tsqueries. CompareTSQ has to have a guard for the case rather than blindly
applying QTNodeCompare to random data past the end of the datums. Also,
change QTNodeCompare to be a little less trusting: use an actual test rather
than just Assert'ing that the input is sane. Problem encountered while
investigating another issue (I saw a core dump in autoanalyze on a table
containing multiple empty tsquery values).
Back-patch to all branches with tsquery support.
In HEAD, also fix some bizarre (though not outright wrong) coding in
tsq_mcontains().
since Apple shipped a compiler that needed this switch, and there's
increasing interest in using other compilers that won't accept the switch
at all. Better to let anybody who still needs the switch inject it via
CPPFLAGS. Per gripe from Neil Conway.
While this hack arguably has some benefit in terms of making PL/pgsql's
line numbering match the programmer's expectations, it also makes
PL/pgsql inconsistent with the remaining PLs, making it difficult for
clients to reliably determine where the error actually is. On balance,
it seems better to be consistent.
Pavel Stehule
from "clang". The VERR changes make an assignment unconditional, which is
probably easier to read/understand anyway, and one can hardly argue that
it's worth shaving cycles off the case of reporting another error when
one has already been detected. The INSIST change limits where that macro
can be used, but not in a way that creates a problem for any existing call.
interval input "invalid" was specified together with other fields. Spotted
by Neil Conway with the help of a clang warning. Although this has been
wrong since the interval code was written more than 10 years ago, it doesn't
affect anything beyond which error message you get for a wrong input, so not
worth back-patching very far.
indexes when the index column type (the opclass opckeytype) is different from
the expression's datatype. When coded, this limitation wasn't worth worrying
about because we had no intelligence to speak of in stats collection for the
datatypes used by such opclasses. However, now that there's non-toy
estimation capability for tsvector queries, it amounts to a bug that ANALYZE
fails to do this.
The fix changes struct VacAttrStats, and therefore constitutes an API break
for custom typanalyze functions. Therefore we can't back-patch it into
released branches, but it was agreed that 9.0 isn't yet frozen hard enough
to make such a change unacceptable. Ergo, back-patch to 9.0 but no further.
The API break had better be mentioned in 9.0 release notes.
bright, but it beats assuming that a prefix match behaves identically to an
exact match, which is what the code was doing before :-(. Noted while
experimenting with Artur Dobrowski's example.
Although the key-combining code claimed to work correctly if its input
contained both lossy and exact pointers for a single page in a single TID
stream, in fact this did not work, and could not work without pretty
fundamental redesign. Modify keyGetItem so that it will not return such a
stream, by handling lossy-pointer cases a bit more explicitly than we did
before.
Per followup investigation of a gripe from Artur Dabrowski.
An example of a query that failed given his data set is
select count(*) from search_tab where
(to_tsvector('german', keywords ) @@ to_tsquery('german', 'ee:* | dd:*')) and
(to_tsvector('german', keywords ) @@ to_tsquery('german', 'aa:*'));
Back-patch to 8.4 where the lossy pointer code was introduced.
struct representing a tree entry, rather than being a separately allocated
piece of storage. This API is at least as clean as the old one (if not
more so --- there were some bizarre choices in there) and it permits a
very substantial memory savings, on the order of 2X in ginbulk.c's usage.
Also, fix minor memory leaks in code called by ginEntryInsert, in
particular in ginInsertValue and entryFillRoot, as well as ginEntryInsert
itself. These leaks resulted in the GIN index build context continuing
to bloat even after we'd filled it to maintenance_work_mem and started
to dump data out to the index.
In combination these fixes restore the GIN index build code to honoring
the maintenance_work_mem limit about as well as it did in 8.4. Speed
seems on par with 8.4 too, maybe even a bit faster, for a non-pathological
case in which HEAD was formerly slower.
Back-patch to 9.0 so we don't have a performance regression from 8.4.
possible (ie, whenever the tsquery is a constant), even when no statistics
are available for the tsvector. For example, foo @@ 'a & b'::tsquery
can be expected to be more selective than foo @@ 'a'::tsquery, whether
or not we know anything about foo. We use DEFAULT_TS_MATCH_SEL as the assumed
selectivity of individual query terms when no stats are available, then
combine the terms according to the query's AND/OR structure as usual.
Per experimentation with Artur Dabrowski's example. (The fact that there
are no stats available in that example is a problem in itself, but
nonetheless tsmatchsel should be smarter about the case.)
Back-patch to 8.4 to keep all versions of tsmatchsel() in sync.
routines to make them behave better in the presence of "lossy" index pointers.
The previous coding was outright incorrect for some cases, as recently
reported by Artur Dabrowski: scanGetItem would fail to return index entries in
cases where one index key had multiple exact pointers on the same page as
another key had a lossy pointer. Also, keyGetItem was extremely inefficient
for cases where a single index key generates multiple "entry" streams, such as
an @@ operator with a multiple-clause tsquery. The presence of a lossy page
pointer in any one stream defeated its ability to use the opclass
consistentFn, resulting in probing many heap pages that didn't really need to
be visited. In Artur's example case, a query like
WHERE tsvector @@ to_tsquery('a & b')
was about 50X slower than the theoretically equivalent
WHERE tsvector @@ to_tsquery('a') AND tsvector @@ to_tsquery('b')
The way that I chose to fix this was to have GIN call the consistentFn
twice with both TRUE and FALSE values for the in-doubt entry stream,
returning a hit if either call produces TRUE, but not if they both return
FALSE. The code handles this for the case of a single in-doubt entry stream,
but punts (falling back to the stupid behavior) if there's more than one lossy
reference to the same page. The idea could be scaled up to deal with multiple
lossy references, but I think that would probably be wasted complexity. At
least to judge by Artur's example, such cases don't occur often enough to be
worth trying to optimize.
Back-patch to 8.4. 8.3 did not have lossy GIN index pointers, so not
subject to these problems.
look through join alias Vars to avoid breaking join queries, and
move the test to someplace where it will catch more possible ways
of calling a function. We still ought to throw away the whole thing
in favor of a data-type-based solution, but that's not feasible in
the back branches.
This needs to be back-patched further than 9.0, but I don't have time
to do so today. Committing now so that the fix gets into 9.0beta4.
Transaction aborts now record their LSN to avoid corner case
behaviour in SR/HS, hence change of name of variables and functions.
As pointed out by Fujii Masao. Cosmetic changes only.
related functions. Per today's discussion, we will henceforth assume
that datatype I/O functions are either stable or immutable, never volatile.
(This implies in particular that domain CHECK constraint expressions shouldn't
be volatile, since domain_in executes them.) In turn, functions that execute
the I/O functions of arbitrary datatypes should always be labeled stable.
This affects the labeling of array_to_string, which was unsafely marked
immutable, and record_in, record_out, record_recv, record_send,
domain_in, domain_recv, which were over-conservatively marked volatile.
The array I/O functions were already marked stable, which is correct
per this policy but would have been wrong if we maintained domain_in
as volatile.
Back-patch to 9.0, along with an earlier fix to correctly mark cash_in
and cash_out as stable not immutable (since they depend on lc_monetary).
No catversion bump --- the implications of this are not currently
severe enough to justify a forced initdb.
assuming that a local char[] array would be aligned on at least a word
boundary. There are architectures on which that is pretty much guaranteed to
NOT be the case ... and those arches also don't like non-aligned memory
accesses, meaning that log_newpage() would crash if it ever got invoked.
Even on Intel-ish machines there's a potential for a large performance penalty
from doing I/O to an inadequately aligned buffer. So palloc it instead.
Backpatch to 8.0 --- 7.4 doesn't have this code.
If a zeroed page is present in the heap, ALTER TABLE .. SET TABLESPACE will
set the LSN and TLI while copying it, which is wrong, and heap_xlog_newpage()
will do the same thing during replay, so the corruption propagates to any
standby. Note, however, that the bug can't be demonstrated unless archiving
is enabled, since in that case we skip WAL logging altogether, and the LSN/TLI
are not set.
Back-patch to 8.0; prior releases do not have tablespaces.
Analysis and patch by Jeff Davis. Adjustments for back-branches and minor
wordsmithing by me.
list in ExecLockRows() forgot to allow for the possibility that some of the
rowmarks are for child tables that aren't relevant to the current row.
Per report from Kenichiro Tanaka.
Avoid hard-coding lockmode used for many altering DDL commands, allowing easier
future changes of lock levels. Implementation of initial analysis on DDL
sub-commands, so that many lock levels are now at ShareUpdateExclusiveLock or
ShareRowExclusiveLock, allowing certain DDL not to block reads/writes.
First of number of planned changes in this area; additional docs required
when full project complete.
a pass-by-reference datatype with a nontrivial projection step.
We were using the same memory context for the projection operation as for
the temporary context used by the hashtable routines in execGrouping.c.
However, the hashtable routines feel free to reset their temp context at
any time, which'd lead to destroying input data that was still needed.
Report and diagnosis by Tao Ma.
Back-patch to 8.1, where the problem was introduced by the changes that
allowed us to work with "virtual" tuples instead of materializing intermediate
tuple values everywhere. The earlier code looks quite similar, but it doesn't
suffer the problem because the data gets copied into another context as a
result of having to materialize ExecProject's output tuple.
We used to be consistent about this, but my recent patch to add a
restart_after_crash GUC failed to follow the existing convention.
Report and patch from Fujii Masao.
We now use the phrase 'via local socket in' rather than 'on host' in both
\c and \conninfo output, when applicable.
Fujii Masao, with some kibitzing by me.
I've added a quote_all_identifiers GUC which affects the behavior
of the backend, and a --quote-all-identifiers argument to pg_dump
and pg_dumpall which sets the GUC and also affects the quoting done
internally by those applications.
Design by Tom Lane; review by Alex Hunsaker; in response to bug #5488
filed by Hartmut Goebel.
Remove bespoke code in DoCopy and RI_Initial_Check, which now instead
fabricate call ExecCheckRTPerms with a manufactured RangeTblEntry.
This is intended to make it feasible for an enhanced security provider
to actually make use of ExecutorCheckPerms_hook, but also has the
advantage that RI_Initial_Check can allow use of the fast-path when
column-level but not table-level permissions are present.
KaiGai Kohei. Reviewed (in an earlier version) by Stephen Frost, and by me.
Some further changes to the comments by me.
Per discussion with David Christensen, there can be multiple
instances of PG accessible via local sockets, and you need the port
to see which one you're actually connected to. David's original
patch worked this way, but I inadvertently ripped it out during
commit.
Normally, we automatically restart after a backend crash, but in some
cases when PostgreSQL is invoked by clusterware it may be desirable to
suppress this behavior, so we provide an option which does this.
Since no existing GUC group quite fits, create a new group called
"error handling options" for this and the previously undocumented GUC
exit_on_error, which is now documented.
Review by Fujii Masao.
path when CSV logging is configured but not yet operational. It's sufficient
to send the message to stderr, as we were already doing, and the "Not safe"
gripe has already confused at least two core members ...
Backpatch to 9.0, but not further --- doesn't seem appropriate to change
this behavior in stable branches.
any implicit casting previously applied to the targetlist item. This is
reasonable because the implicit cast, by definition, wasn't written by the
user; so we are preserving the expected behavior that ORDER BY items match
textually equivalent tlist items. The case never arose before because there
couldn't be any implicit casting of a top-level SELECT item before we process
ORDER BY etc. But now it can arise in the context of aggregates containing
ORDER BY clauses, since the "targetlist" is the already-casted list of
arguments for the aggregate. The net effect is that the datatype used for
ORDER BY/DISTINCT purposes is the aggregate's declared input type, not that
of the original input column; which is a bit debatable but not horrendous,
and to do otherwise would require major rework that doesn't seem justified.
Per bug #5564 from Daniel Grace. Back-patch to 9.0 where aggregate ORDER BY
was implemented.
This adds a libpq connection parameter requirepeer that specifies the user
name that the server process is expected to run under.
reviewed by KaiGai Kohei
log files created by the syslogger process.
In passing, make unix_file_permissions display its value in octal, same
as log_file_mode now does.
Martin Pihlak
from defining non-self-conflicting constraints.
Jeff Davis
Note: I (tgl) objected to removing this check in 9.0 on the grounds that it
was an important sanity check in new, poorly tested code. However, it should
be all right to remove it for 9.1, since we'll get field testing from the
9.0 branch.
to dump a PUBLIC user mapping correctly, as per bug #5560 from Shigeru Hanada.
Use the pg_user_mappings view rather than trying to access pg_user_mapping
directly, so that the code doesn't fail when run by a non-superuser. And
clean up some minor carelessness such as unsafe usage of fmtId().
Back-patch to 8.4 where this code was added.
parameter against server cert's CN field) to succeed in the case where
both host and hostaddr are specified. As with the existing precedents
for Kerberos, GSSAPI, SSPI, it is the calling application's responsibility
that host and hostaddr match up --- we just use the host name as given.
Per bug #5559 from Christopher Head.
In passing, make the error handling and messages for the no-host-name-given
failure more consistent among these four cases, and correct a lie in the
documentation: we don't attempt to reverse-lookup host from hostaddr
if host is missing.
Back-patch to 8.4 where SSL cert verification was introduced.
rather than just $N. This brings the display of nestloop-inner-indexscan
plans back to where it's been, and incidentally improves the display of
SubPlan parameters as well. In passing, simplify the EXPLAIN code by
having it deal primarily in the PlanState tree rather than separately
searching Plan and PlanState trees. This is noticeably cleaner for
subplans, and about a wash elsewhere.
One small difference from previous behavior is that EXPLAIN will no longer
qualify local variable references in inner-indexscan plan nodes, since it
no longer sees such nodes as possibly referencing multiple tables. Vars
referenced through PARAM_EXEC Params are still forcibly qualified, though,
so I don't think the display is any more confusing than before. Adjust a
couple of examples in the documentation to match this behavior.
loop from being dropped, I missed subtransaction cleanup. Pinned portals
must be dropped at subtransaction cleanup just as they are at main
transaction cleanup.
Per bug #5556 by Robert Walker. Backpatch to 8.0, 7.4 didn't have
subtransactions.
relation using the general PARAM_EXEC executor parameter mechanism, rather
than the ad-hoc kluge of passing the outer tuple down through ExecReScan.
The previous method was hard to understand and could never be extended to
handle parameters coming from multiple join levels. This patch doesn't
change the set of possible plans nor have any significant performance effect,
but it's necessary infrastructure for future generalization of the concept
of an inner indexscan plan.
ExecReScan's second parameter is now unused, so it's removed.
use the actual element type of the array it's disassembling, rather than
trusting the type OID passed in by its caller. This is needed because
sometimes the planner passes in a type OID that's only binary-compatible
with the target column's type, rather than being an exact match. Per an
example from Bernd Helmle.
Possibly we should refactor get_attstatsslot/free_attstatsslot to not expect
the caller to supply type ID data at all, but for now I'll just do the
minimum-change fix.
Back-patch to 7.4. Bernd's test case only crashes back to 8.0, but since
these subroutines are the same in 7.4, I suspect there may be variant
cases that would crash 7.4 as well.
resjunk outputs of subquery tlists, instead of throwing an error. Per bug
#5548 from Daniel Grace.
We might at some point find we ought to back-patch this further than 9.0,
but I think that such Vars can only occur as resjunk members of upper-level
tlists, in which case the problem can't arise because prior versions didn't
print resjunk tlist items in EXPLAIN VERBOSE.
This hook allows a loadable module to gain control when table permissions
are checked. It is expected to be used by an eventual SE-PostgreSQL
implementation, but there are other possible applications as well. A
sample contrib module can be found in the archives at:
http://archives.postgresql.org/pgsql-hackers/2010-05/msg01095.php
Robert Haas and Stephen Frost
(_PG_init should be called only once anyway, but as long as it's got an
internal guard against repeat calls, that should be in front of the
version check.)
This wasn't important when we used diff's -w (--ignore-all-space) option
to compare regression result files, but it is now. Per buildfarm member
canary, which evidently has been offline since we did that in November,
but came to life again today.
sub-select contains a join alias reference that expands into an expression
containing another sub-select. Per yesterday's report from Merlin Moncure
and subsequent off-list investigation.
Back-patch to 7.4. Older versions didn't attempt to flatten sub-selects in
ways that would trigger this problem.
To do that, replace L'\0' by (WCHAR) 0. Perhaps someday we should teach
pgindent about wide-character literals, but so long as this is the only
use-case in the entire Postgres sources, a workaround seems easier.
Per extensive discussion on pgsql-hackers. We are deliberately not
back-patching this even though the behavior of 8.3 and 8.4 is
unquestionably broken, for fear of breaking existing users of this
parameter. This incompatibility should be release-noted.
flag for src/port/ in front of any -L flags placed in LDFLAGS by configure.
This undoes an L-flag-ordering change that I had thought would be safe,
but seems to be making at least one buildfarm member fail --- the only
theory for orca's failure that I can think of is that it's got an old
copy of libpgport.a in /usr/lib. Also allow for LDFLAGS_SL to be set by
contrib makefiles before they invoke Makefile.global.
needs to appear before anything placed in SHLIB_LINK. This is because
SHLIB_LINK is typically a subset of LIBS, and LIBS has to appear after
LDFLAGS on platforms that are sensitive to the relative order of -L and -l
switches.
supposing that they should set SHLIB_LINK rather than LDFLAGS_SL. Since these
don't go through Makefile.shlib that was a no-op on most platforms. Also
regularize the few platform-specific Makefiles that did pay attention to
SHLIB_LINK: it seems that the real value of that is to pull in BE_DLLLIBS,
so do that instead. Per buildfarm failures on cygwin.
linking both executables and shared libraries, and we add on LDFLAGS_EX when
linking executables or LDFLAGS_SL when linking shared libraries. This
provides a significantly cleaner way of dealing with link-time switches than
the former behavior. Also, make sure that the various platform-specific
%.so: %.o rules incorporate LDFLAGS and LDFLAGS_SL; most of them missed that
before. (I did not add these variables for the platforms that invoke $(LD)
directly, however. It's not clear if we can do that safely, since for the
most part we assume these variables use CC command-line syntax.)
Per gripe from Aaron Swenson and subsequent investigation.
being used in a PL/pgSQL FOR loop is closed was inadequate, as Tom Lane
pointed out. The bug affects FOR statement variants too, because you can
close an implicitly created cursor too by guessing the "<unnamed portal X>"
name created for it.
To fix that, "pin" the portal to prevent it from being dropped while it's
being used in a PL/pgSQL FOR loop. Backpatch all the way to 7.4 which is
the oldest supported version.
idea from the start since the variable is only meant to track commit/abort
events. This patch reverts the logic around the variable to what it was in
8.4, except that the value is now kept in shared memory rather than a static
variable, so that it can be reported correctly by CreateRestartPoint (which is
executed in the bgwriter).
to have different values in different processes of the primary server.
Also put it into the "Streaming Replication" GUC category; it doesn't belong
in "Standby Servers" because you use it on the master not the standby.
In passing also correct guc.c's idea of wal_keep_segments' category.
max_standby_streaming_delay, and revise the implementation to avoid assuming
that timestamps found in WAL records can meaningfully be compared to clock
time on the standby server. Instead, the delay limits are compared to the
elapsed time since we last obtained a new WAL segment from archive or since
we were last "caught up" to WAL data arriving via streaming replication.
This avoids problems with clock skew between primary and standby, as well
as other corner cases that the original coding would misbehave in, such
as the primary server having significant idle time between transactions.
Per my complaint some time ago and considerable ensuing discussion.
Do some desultory editing on the hot standby documentation, too.
Backpatch to 8.3, which is as far back as we have opfamilies.
The opclass portion could probably be backpatched to 8.2, when
REASSIGN OWNED was added, but for now I have not done that.
Asko Tiidumaa, with minor adjustments by me.
The previous commit to make copydir() interruptible prevented
postgres.exe from linking on MinGW and Cygwin, because on those
platforms libpgport_srv.a can't freely reference symbols defined
by the backend. Since that code is already backend-specific anyway,
just move the whole file into the backend rather than adding further
kludges to deal with the symbols needed by CHECK_FOR_INTERRUPTS().
This probably needs some further cleanup, but this commit just moves
the file as-is, which should hopefully be enough to turn the
buildfarm green again.
This makes ALTER DATABASE .. SET TABLESPACE and CREATE DATABASE more
sensitive to interrupts. Backpatch to 8.4, where ALTER DATABASE .. SET
TABLESPACE was introduced. We could go back further, but in the absence
of complaints about the CREATE DATABASE case it doesn't seem worth it.
Guillaume Lelarge, with a small correction by me.
but we have nevertheless exposed them to users via pg_get_expr(). It would
be too much maintenance effort to rigorously check the input, so put a hack
in place instead to restrict pg_get_expr() so that the argument must come
from one of the system catalog columns known to contain valid expressions.
Per report from Rushabh Lathia. Backpatch to 7.4 which is the oldest
supported version at the moment.
as well as fseeko, and to not assume that fseeko(fp, 0, SEEK_CUR) proves
anything. Also improve some related comments. Per my observation that
the SEEK_CUR test didn't actually work on some platforms, and subsequent
discussion with Robert Haas.
Back-patch to 8.4. In earlier releases it's not that important whether
we get the hasSeek test right, but with parallel restore it matters.
contain data offsets (which it won't, if pg_dump thought its output wasn't
seekable). To do that, remove an unnecessarily aggressive error check, and
instead fail if we get to the end of the archive without finding the desired
data item. Also improve the error message to be more specific about the
cause of the problem. Per discussion of recent report from Igor Neyman.
Back-patch to 8.4 where parallel restore was introduced.
of YYSTYPE, and hence returning the wrong answer for cases where a plpgsql
"unreserved keyword" really does conflict with a variable name. Obviously
I didn't test this enough :-(. Per bug #5524 from Peter Gagarinov.
This adds four additional connection parameters to libpq: keepalives,
keepalives_idle, keepalives_count, and keepalives_interval.
keepalives default to on, per discussion, but can be turned off by
specifying keepalives=0. The remaining parameters, where supported,
can be used to adjust how often keepalives are sent and how many
can be lost before the connection is broken.
The immediate motivation for this patch is to make sure that
walreceiver will eventually notice if the master reboots without
closing the connection cleanly, but it should be helpful in other
cases as well.
Tollef Fog Heen, Fujii Masao, and me.
In HEAD, emit a warning when an operator named => is defined.
In both HEAD and the backbranches (except in 8.2, where contrib
modules do not have documentation), document that hstore's text =>
text operator may be removed in a future release, and encourage the
use of the hstore(text, text) function instead. This function only
exists in HEAD (previously, it was called tconvert), so backpatch
it back to 8.2, when hstore was added. Per discussion.
might close the cursor, rendering the Portal pointer to it invalid.
Closing the cursor in the middle of the loop is not a very sensible thing
to do, but we must handle it gracefully and throw an error instead of
crashing.
If such a Var appeared within a nested sub-select, we failed to translate it
correctly during pullup of the view, because the recursive call to
replace_rte_variables_mutator was looking for the wrong sublevels_up value.
Bug was introduced during the addition of the PlaceHolderVar mechanism.
Per bug #5514 from Marcos Castedo.
master. Otherwise a subsequent crash could cause the master to lose WAL that
has already been applied on the slave, resulting in the slave being out of
sync and soon corrupt. Per recent discussion and an example from Robert Haas.
Fujii Masao
description for vacuum_defer_cleanup_age to the correct category.
Sections in postgresql.conf are also sorted in the same order with docs.
Per gripe by Fujii Masao, suggestion by Heikki Linnakangas, and patch by me.
and retry. If the record is genuinely corrupt in the master database,
there's little hope of recovering, but it's better than simply retrying
to apply the corrupt WAL record in a tight loop without even trying to
retransmit it, which is what we used to do.
string for a streaming replication connection. It's ignored by the
server, but allows libpq to pick up the password from .pgpass where
"replication" is specified as the database name.
Patch by Fujii Masao per Tom's suggestion, with some wording changes by me.
pg_last_xlog_replay_location(). Per Robert Haas's suggestion, after
Itagaki Takahiro pointed out an issue in the docs. Also, some wording
changes in the docs by me.
While my previous attempt seems to always produce valid YAML, it
doesn't always produce YAML that means what it appears to mean,
because of tokens like "0xa" and "true", which without quotes will
be interpreted as integer or Boolean literals. So, instead, just
quote everything that's not known to be a number, as we do for
JSON.
Dean Rasheed, with some changes to the comments by me.
checkpoint_timeout to trigger restartpoints. We used to deliberately only
do time-based restartpoints, because if checkpoint_segments is small we
would spend time doing restartpoints more often than really necessary.
But now that restartpoints are done in bgwriter, they're not as
disruptive as they used to be. Secondly, because streaming replication
stores the streamed WAL files in pg_xlog, we want to clean it up more
often to avoid running out of disk space when checkpoint_timeout is large
and checkpoint_segments small.
Patch by Fujii Masao, with some minor changes by me.
the current one. Not doing this would leave the walwriter with a handle to a
deleted file if there was nothing for it to do for a long period of time,
preventing the file from being completely removed.
Reported by Tollef Fog Heen, and thanks to Heikki for some hand-holding with
the patch.
The previous code failed to quote in many cases where quoting was necessary -
YAML has loads of special characters, including -:[]{},"'|*& - so quote much
more aggressively, and only refrain from quoting things where it seems fairly
clear that it isn't necessary.
Per report from Dean Rasheed.
to be initialized with proper values. Affected parameters are
fillfactor, analyze_threshold, and analyze_scale_factor.
Especially uninitialized fillfactor caused inefficient page usage
because we built a StdRdOptions struct in which fillfactor is zero
if any reloption is set for the toast table.
In addition, we disallow toast.autovacuum_analyze_threshold and
toast.autovacuum_analyze_scale_factor because we didn't actually
support them; they are always ignored.
Report by Rumko on pgsql-bugs on 12 May 2010.
Analysis by Tom Lane and Alvaro Herrera. Patch by me.
Backpatch to 8.4.
and current server clock time to SR data messages. These are not currently
used on the slave side but seem likely to be useful in future, and it'd be
better not to change the SR protocol after release. Per discussion.
Also do some minor code review and cleanup on walsender.c, and improve the
protocol documentation.
We must filter out hashtable entries with frequencies less than those
specified by the algorithm, else we risk emitting junk entries whose
actual frequency is much less than other lexemes that did not get
tabulated. This is bad enough by itself, but even worse is that
tsquerysel() believes that the minimum frequency seen in pg_statistic is a
hard upper bound for lexemes not included, and was thus underestimating
the frequency of non-MCEs.
Also, set the threshold frequency to something with a little bit of theory
behind it, to wit assume that the input distribution is approximately
Zipfian. This might need adjustment in future, but some preliminary
experiments suggest that it's not too unreasonable.
Back-patch to 8.4, where this code was introduced.
Jan Urbanski, with some editorialization by Tom
"val AS name" to "name := val", as per recent discussion.
This patch catches everything in the original named-parameters patch,
but I'm not certain that no other dependencies snuck in later (grepping
the source tree for all uses of AS soon proved unworkable).
In passing I note that we've dropped the ball at least once on keeping
ecpg's lexer (as opposed to parser) in sync with the backend. It would
be a good idea to go through all of pgc.l and see if it's in sync now.
I didn't attempt that at the moment.
output stream. This typically indicates that the user quit out of $PAGER,
or that we are writing to a file and ran out of disk space. In either case
we shouldn't bother to continue fetching data.
Stephen Frost
end of the pattern: the code path that handles \ just after % should throw
error too. As in the previous patch, not back-patching for fear of breaking
apps that worked before.
for sure ;-)). It now also optimizes more cases, such as %_%_. Improve
comments too. Per bug #5478.
In passing, also rename the TCHAR macro to GETCHAR, because pgindent is
messing with the formatting of the former (apparently it now thinks TCHAR
is a typedef name).
Back-patch to 8.3, where the bug was introduced.
is treated like end-of-input, if nulls sort last in that column and we are not
doing outer-join filling for that input. In such a case, the tuple cannot
join to anything from the other input (because we assume mergejoinable
operators are strict), and neither can any tuple following it in the sort
order. If we're not interested in doing outer-join filling we can just
pretend the tuple and its successors aren't there at all. This can save a
great deal of time in situations where there are many nulls in the join
column, as in a recent example from Scott Marlowe. Also, since the planner
tends to not count nulls in its mergejoin scan selectivity estimates, this
is an important fix to make the runtime behavior more like the estimate.
I regard this as an omission in the patch I wrote years ago to teach mergejoin
that tuples containing nulls aren't joinable, so I'm back-patching it. But
only to 8.3 --- in older versions, we didn't have a solid notion of whether
nulls sort high or low, so attempting to apply this optimization could break
things.
This saves cycles in get_ps_display() on many popular platforms, and more
importantly ensures that get_ps_display() will correctly return an empty
string if init_ps_display() hasn't been called yet. Per trouble report
from Ray Stell, in which log_line_prefix %i produced junk early in backend
startup.
Back-patch to 8.0. 7.4 doesn't have %i and its version of get_ps_display()
makes no pretense of avoiding pad junk anyhow.
immutable, but that is wrong in general because the cast from the polymorphic
argument to text could be stable or even volatile. Mark them volatile for
safety. In the typical case where the cast isn't volatile, the planner will
deduce the correct expression volatility after inlining the function, so
performance is not lost. The just-committed fix in CREATE INDEX also ensures
this won't break any indexing cases that ought to be allowed.
Per discussion, I'm not bumping catversion for this change, as it doesn't
seem critical enough to force an initdb on beta testers.
before it checks whether the expression is immutable. This covers two cases
that were previously handled poorly:
1. SQL function inlining could reduce the apparent volatility of the
expression, allowing an expression to be accepted where it previously would
not have been. As an example, polymorphic functions must be marked with the
worst-case volatility they have for any argument type, but for specific
argument types they might not be so volatile, so indexing could be allowed.
(Since the planner will refuse to inline functions in cases where the
apparent volatility of the expression would increase, this won't break
any cases that were accepted before.)
2. A nominally immutable function could have default arguments that are
volatile expressions. In such a case insertion of the defaults will increase
both the apparent and actual volatility of the expression, so it is
*necessary* to check this before allowing the expression to be indexed.
Back-patch to 8.4, where default arguments were introduced.
In particular, it's bad to start walreceiver when in state
PM_WAIT_BACKENDS, because we have no provision to kill walreceiver
when in that state.
Fujii Masao
otherwise we effectively rate-limit the streaming as pointed out by
Simon Riggs. Also, send the WAL in smaller chunks, to respond to signals
more promptly.
additional cases correctly. The original coding failed to load additional
(chain) certificates from the client cert file, meaning that indirectly signed
client certificates didn't work unless one hacked the server's root.crt file
to include intermediate CAs (not the desired approach). Another problem was
that everything got loaded into the shared SSL_context object, which meant
that concurrent connections trying to use different sslcert settings could
well fail due to conflicting over the single available slot for a keyed
certificate.
To fix, get rid of the use of SSL_CTX_set_client_cert_cb(), which is
deprecated anyway in the OpenSSL documentation, and instead just
unconditionally load the client cert and private key during connection
initialization. This lets us use SSL_CTX_use_certificate_chain_file(),
which does the right thing with additional certs, and is lots simpler than
the previous hacking about with BIO-level access. A small disadvantage is
that we have to load the primary client cert a second time with
SSL_use_certificate_file, so that that one ends up in the correct slot
within the connection's SSL object where it can get paired with the key.
Given the other overhead of making an SSL connection, that doesn't seem
worth worrying about.
Per discussion ensuing from bug #5468.
During Hot Standby we need to check for buffer pin deadlocks when the
Startup process begins to wait, in case it never wakes up again. We
previously made the deadlock check immediately on the basis it was
cheap, though clearer thinking and prima facie evidence shows that
was too simple. Refactor existing code to make it easy to add in
deferral of deadlock check until deadlock_timeout allowing a good
reduction in deadlock checks since far few buffer pins are held for
that duration. It's worth doing anyway, though major goal is to
prevent further reports of context switching with high numbers of
users on occasional tests.
requests for client certs. This lets a client with a keystore select the
appropriate client certificate to send. In particular, this is necessary
to get Java clients to work in all but the most trivial configurations.
Per discussion of bug #5468.
Craig Ringer
1. If we receive a fast shutdown request while in the PM_STARTUP state,
process it just as we would in PM_RECOVERY, PM_HOT_STANDBY, or PM_RUN.
Without this change, an early fast shutdown followed by Hot Standby causes
the database to get stuck in a state where a shutdown is pending (so no new
connections are allowed) but the shutdown request is never processed unless
we end Hot Standby and enter normal running.
2. Avoid removing the backup label file when a smart or fast shutdown occurs
during recovery. It makes sense to do this once we've reached normal running,
since we must be taking a backup which now won't be valid. But during
recovery we must be recovering from a previously taken backup, and any backup
label file is needed to restart recovery from the right place.
Fujii Masao and Robert Haas
If the original IN operator is cross-type, for example int8 = int4,
we need to use int4 < int4 to sort the inner data and int4 = int4
to unique-ify it. We got the first part of that right, but tried to
use the original IN operator for the equality checks. Per bug #5472
from Vlad Romascanu.
Backpatch to 8.4, where the bug was introduced by the patch that unified
SortClause and GroupClause. I was able to take out a whole lot of on-the-fly
calls of get_equality_op_for_ordering_op(), but failed to realize that
I needed to put one back in right here :-(
Asia/Novosibirsk on Windows.
Microsoft changed the behaviour of this zone in the timezone update
from KB976098. The zones differ in handling of DST, and the old
zone was just removed.
Noted by Dmitry Funk
is specified. Per bug report from Russell Smith and ensuing discussion.
Since this is a corner case behavioral change, I'm going to be conservative
and not back-patch it.
In passing, also rename the RestoreOptions field for the -C switch to
something less generic than "create".
that is a regular table or view owned by a superuser. This prevents a
trojan horse attack whereby any unprivileged SQL user could create such a
table and insert code into it that would then get executed in other users'
sessions whenever they call pltcl functions.
Worse yet, because the code was automatically loaded into both the "normal"
and "safe" interpreters at first use, the attacker could execute unrestricted
Tcl code in the "normal" interpreter without there being any pltclu functions
anywhere, or indeed anyone else using pltcl at all: installing pltcl is
sufficient to open the hole. Change the initialization logic so that the
"unknown" code is only loaded into an interpreter when the interpreter is
first really used. (That doesn't add any additional security in this
particular context, but it seems a prudent change, and anyway the former
behavior violated the principle of least astonishment.)
Security: CVE-2010-1170
fundamentally insecure. Instead apply an opmask to the whole interpreter that
imposes restrictions on unsafe operations. These restrictions are much harder
to subvert than is Safe.pm, since there is no container to be broken out of.
Backported to release 7.4.
In releases 7.4, 8.0 and 8.1 this also includes the necessary backporting of
the two interpreters model for plperl and plperlu adopted in release 8.2.
In versions 8.0 and up, the use of Perl's POSIX module to undo its locale
mangling on Windows has become insecure with these changes, so it is
replaced by our own routine, which is also faster.
Nice side effects of the changes include that it is now possible to use perl's
"strict" pragma in a natural way in plperl, and that perl's $a and
$b variables now work as expected in sort routines, and that function
compilation is significantly faster.
Tim Bunce and Andrew Dunstan, with reviews from Alex Hunsaker and
Alexey Klyukin.
Security: CVE-2010-1169
mkinstalldirs used to handle no arguments, but mkdir doesn't.
Also remove the .SILENT setting, that was previously removed from
Makefile.global as well.
so simply leads to data waiting in wal_buffers which then causes
later commits to potentially do emergency writes and for all forms
of replication to be potentially delayed without need or benefit.
Issue pointed out exactly by Fujii Masao, following bug report
by Robert Haas on a separate though related topic.
of requirements and documentation on LogStandbySnapshot(). Fixes
two minor bugs reported by Tom Lane that would lead to an incorrect
snapshot after transaction wraparound. Also fix two other problems
discovered that would give incorrect snapshots in certain cases.
ProcArrayApplyRecoveryInfo() substantially rewritten. Some minor
refactoring of xact_redo_apply() and ExpireTreeKnownAssignedTransactionIds().
archive_command) as soon as possible, namely just before issuing a new call
of archive_command, even when there is a backlog of files to be archived.
The original coding would only absorb new settings after clearing the backlog
and returning to the outer loop. Per discussion.
Back-patch to 8.3. The logic in prior versions is a bit different and it
doesn't seem worth taking any risks of breaking it.
Now validators work properly even when the settings contain
parameters that affect behavior of the function, like search_path.
Reported by Erwin Brandstetter.
MIN or MAX, we must take care to insert the added qual in a legal place among
the existing indexquals, if any. The btree index AM requires the quals to
appear in index-column order. We didn't have to worry about this before
because "target IS NOT NULL" was just treated as a plain scan filter condition;
but as of 9.0 it can be an index qual and then it has to follow the rule.
Per report from Ian Barwick.
My initial impression that glibc was measuring the precision in characters
(which is what the Linux man page says it does) was incorrect. It does take
the precision to be in bytes, but it also tries to truncate the string at a
character boundary. The bottom line remains the same: it will mess up
if the string is not in the encoding it expects, so we need to avoid %.*s
anytime there's a significant risk of that. Previous code changes are still
good, but adjust the comments to reflect this knowledge. Per research by
Hernan Gonzalez.
Depending on which spec you read, field widths and precisions in %s may be
counted either in bytes or characters. Our code was assuming bytes, which
is wrong at least for glibc's implementation, and in any case libc might
have a different idea of the prevailing encoding than we do. Hence, for
portable results we must avoid using anything more complex than just "%s"
unless the string to be printed is known to be all-ASCII.
This patch fixes the cases I could find, including the psql formatting
failure reported by Hernan Gonzalez. In HEAD only, I also added comments
to some places where it appears safe to continue using "%.*s".
refers to itself (directly or indirectly). Instead, print a message when
recursion is detected, and don't expand the repeated reference. Per bug
#5448 from Francis Markham.
Back-patch to 8.0. Although the issue exists in 7.4 as well, it seems
impractical to fix there because of the lack of any state stack that
could be used to track active expansions.
minRecoveryPoint in control file when replaying a parameter change record,
to ensure that we don't allow hot standby on WAL generated without
wal_level='hot_standby' after a standby restart.
field of the WAL record. The previous coding always wrote to the main fork,
resulting in data corruption if the page was meant to go into a non-default
fork.
At present, the only operation that can produce such WAL records is
ALTER TABLE/INDEX SET TABLESPACE when executed with archive_mode = on.
Data corruption would be observed on standby slaves, and could occur on the
master as well if a database crash and recovery occurred after committing
the ALTER and before the next checkpoint. Per report from Gordon Shannon.
Back-patch to 8.4; the problem doesn't exist in earlier branches because
we didn't have a concept of multiple relation forks then.
MaxStandbyDelay. Use the GUC units mechanism for the value, and choose more
appropriate timestamp functions for performing tests with it. Make the
ps_activity manipulation in ResolveRecoveryConflictWithVirtualXIDs have
behavior similar to ps_activity code elsewhere, notably not updating the
display when update_process_title is off and not truncating the display
contents at an arbitrarily-chosen length. Improve the docs to be explicit
about what MaxStandbyDelay actually measures, viz the difference between
primary and standby servers' clocks, and the possible hazards if their clocks
aren't in sync.
returns EINVAL for an existing shared memory segment. Although it's not
terribly sensible, that behavior does meet the POSIX spec because EINVAL
is the appropriate error code when the existing segment is smaller than the
requested size, and the spec explicitly disclaims any particular ordering of
error checks. Moreover, it does in fact happen on OS X and probably other
BSD-derived kernels. (We were able to talk NetBSD into changing their code,
but purging that behavior from the wild completely seems unlikely to happen.)
We need to distinguish collision with a pre-existing segment from invalid size
request in order to behave sensibly, so it's worth some extra code here to get
it right. Per report from Gavin Kistner and subsequent investigation.
Back-patch to all supported versions, since any of them could get used
with a kernel having the debatable behavior.
memory if the result had zero rows, and also if there was any sort of error
while converting the result tuples into Python data. Reported and partially
fixed by Andres Freund.
Back-patch to all supported versions. Note: I haven't tested the 7.4 fix.
7.4's configure check for python is so obsolete it doesn't work on my
current machines :-(. The logic change is pretty straightforward though.
to perform a backup without archive_mode being enabled. This gives up some
user-error protection in order to improve usefulness for streaming-replication
scenarios. Per discussion.
confusion with streaming-replication settings. Also, change its default
value to "off", because of concern about executing new and poorly-tested
code during ordinary non-replicating operation. Per discussion.
In passing do some minor editing of related documentation.
contrib/intarray is loaded. Per bug #5417 from Kenaniah Cerny.
Not forcing initdb since backend doesn't directly depend on this,
and few people have run into it.
rather than returning NULL for some-but-not-all failures as they used to.
Remove now-redundant tests for NULL from call sites.
We had to do something about this because many call sites were failing to
check for NULL; and changing it like this seems a lot more useful and
mistake-proof than adding checks to the call sites without them.
archival or hot standby should be WAL-logged, instead of deducing that from
other options like archive_mode. This replaces recovery_connections GUC in
the primary, where it now has no effect, but it's still used in the standby
to enable/disable hot standby.
Remove the WAL-logging of "unlogged operations", like creating an index
without WAL-logging and fsyncing it at the end. Instead, we keep a copy of
the wal_mode setting and the settings that affect how much shared memory a
hot standby server needs to track master transactions (max_connections,
max_prepared_xacts, max_locks_per_xact) in pg_control. Whenever the settings
change, at server restart, write a WAL record noting the new settings and
update pg_control. This allows us to notice the change in those settings in
the standby at the right moment, they used to be included in checkpoint
records, but that meant that a changed value was not reflected in the
standby until the first checkpoint after the change.
Bump PG_CONTROL_VERSION and XLOG_PAGE_MAGIC. Whack XLOG_PAGE_MAGIC back to
the sequence it used to follow, before hot standby and subsequent patches
changed it to 0x9003.
to RFC 3986. In particular, these characters now terminate the path part
of a URL: '"', '<', '>', '\', '^', '`', '{', '|', '}'. The previous behavior
was inconsistent and depended on whether a "?" was present in the path.
Per gripe from Donald Fraser and spec research by Kevin Grittner.
This is a pre-existing bug, but not back-patching since the risks of
breaking existing applications seem to outweigh the benefits.
and be more tense about the locking requirements for it, to improve performance
in Hot Standby mode. In passing fix a few bugs and improve a number of
comments in the existing HS code.
Simon Riggs, with some editorialization by Tom
in WAL recovery when it sees the shutdown checkpoint record. It's more
user-friendly to find out about it at that point than at the end of
recovery, and you're not left wondering why your hot standby server never
opens up for read-only connections.
Normal superuser processes are allowed to connect even when the database
system is shutting down, or when fewer than superuser_reserved_connection
slots remain. This is intended to make sure an administrator can log in
and troubleshoot, so don't extend these same courtesies to users connecting
for replication.
of parameters. Fix bug report by Robert Haas that error message and
hint was incorrect if wrong mode parameters specified on master.
Internal changes only. Proposals for parameter simplification on
master/primary still under way.
come from the realistion that HEAP2_CLEAN records don't
always remove user visible data, so conflict processing for
them can be skipped. Confirm validity using Assert checks,
clarify circumstances under which we log heap_cleanup_info
records. Tuning arises from bug fixing of earlier safety
check failures.
from lc_ctype, that could happen on Windows. We need to change lc_ctype
together with lc_monetary or lc_numeric, and convert strings in lconv
from lc_ctype encoding to the database encoding.
The bug reported by Mikko, original patch by Hiroshi Inoue,
with changes by Bruce and me.
than during define_custom_variable(). This entails rejecting an ALTER
command if the target variable doesn't have a known (non-placeholder)
definition, unless the calling user is superuser. When the variable *is*
known, we can correctly apply the rule that only superusers can issue ALTER
for SUSET parameters. This allows define_custom_variable to apply ALTER's
values for SUSET parameters at module load time, secure in the knowledge
that only a superuser could have set the ALTER value. This change fixes a
longstanding gotcha in the usage of SUSET-level custom parameters; which
is a good thing to fix now that plpgsql defines such a parameter.
There is no other purpose for this message type than to report
the latestRemovedXid of removed tuples, prior to index scans.
Removes overlooked path for sending invalid latestRemovedXid.
Fixes buildfarm failure on centaur.
to handling of btree delete records mean that all snapshot
conflicts on standby now have a valid, useful latestRemovedXid.
Our earlier approach using LW_EXCLUSIVE was useful when we didnt
always have a valid value, though is no longer useful or necessary.
Asserts added to code path to prove and ensure this is the case.
This will reduce contention and improve performance of larger Hot
Standby servers.
vacuum_log_cleanup_info() now generates log records with a valid
latestRemovedXid set in all cases. Also be careful not to zero the
value when we do a round of vacuuming part-way through lazy_scan_heap().
Incidentally, this reduces frequency of conflicts in Hot Standby.
with database = replication. The previous coding would allow them to match
ordinary records too, but that seems like a recipe for security breaches.
Improve the messages associated with no-such-pg_hba.conf entry to report
replication connections as such, since that's now a critical aspect of
whether the connection matches. Make some cursory improvements in the related
documentation, too.
database to connect to. This is necessary for the walsender code to work
properly (it was previously using an untenable assumption that template1 would
always be available to connect to). This also gets rid of a small security
shortcoming that was introduced in the original patch to eliminate the flat
authentication files: before, you could find out whether or not the requested
database existed even if you couldn't pass the authentication checks.
The changes needed to support this are mainly just to treat pg_authid and
pg_auth_members as nailed relations, so that we can read them without having
to be able to locate real pg_class entries for them. This mechanism was
already debugged for pg_database, but we hadn't recognized the value of
applying it to those catalogs too.
Since the current code doesn't have support for accessing toast tables before
we've brought up all of the relcache, remove pg_authid's toast table to ensure
that no one can store an out-of-line toasted value of rolpassword. The case
seems quite unlikely to occur in practice, and was effectively unsupported
anyway in the old "flatfiles" implementation.
Update genbki.pl to actually implement the same rules as bootstrap.c does for
not-nullability of catalog columns. The previous coding was a bit cheesy but
worked all right for the previous set of bootstrap catalogs. It does not work
for pg_authid, where rolvaliduntil needs to be nullable.
Initdb forced due to minor catalog changes (mainly the toast table removal).
Also, make the name of the GUC and the name of the backing variable match.
Alnong the way, clean up a couple of slight typographical errors in the
related docs.
those process types that go through InitPostgres; in particular, bootstrap
and standalone-backend cases. This ensures that we have set up a PGPROC
and done some other basic initialization steps (corresponding to the
if (IsUnderPostmaster) block in AuxiliaryProcessMain) before we attempt to
run WAL recovery in a standalone backend. As was discovered last September,
this is necessary for some corner-case code paths during WAL recovery,
particularly end-of-WAL cleanup.
Moving the bootstrap case here too is not necessary for correctness, but it
seems like a good idea since it reduces the number of distinct code paths.
libpq to send queries, making the waiting for responses interruptible on
platforms where PQexec() can't normally be interrupted by signals, such
as win32.
Fujii Masao and Magnus Hagander
The logic for determining whether to materialize has been significantly
overhauled for 9.0. In case there should be any doubt about whether
materialization is a win in any particular case, this should provide a
convenient way of seeing what happens without it; but even with enable_material
turned off, we still materialize in cases where it is required for
correctness.
Thanks to Tom Lane for the review.
Now doesn't report it is waiting until it actually is waiting,
plus message doesn't appear until at least 5 seconds wait, so
we avoid reporting the wait before we've given the archiver
a reasonable time to wake up and archive the file we just
created earlier in the function.
Also add new unconditional message to confirm safe completion.
Now a normal, healthy execution does not report waiting at
all, just safe completion.
through normal backends. Makes code clearer also, since we
avoid various Assert()s. Performance of snapshots taken
during recovery no longer depends upon number of read-only
backends.
reload and rotation signals, and a helper thread reads messages from the
pipe and writes them to the log file. However, server code isn't generally
thread-safe, so if both try to do e.g palloc()/pfree() at the same time,
bad things will happen. To fix that, use a critical section (which is like
a mutex) to enforce that only one the threads are active at a time.
even when the expression is a query that returns no rows.
So far as I can tell, the only caller that actually fails when a garbage
OID is returned is exec_stmt_case(), which is new in 8.4 --- in all other
cases, we might make a useless trip through casting logic, but we won't
fail since the isnull flag will be set. Hence, backpatch only to 8.4,
just in case there are apps out there that aren't expecting an error to
be thrown if the query returns more or less than one column. (Which seems
unlikely, since the error would be thrown if the query ever did return a
row; but it's possible there's some never-exercised code out there.)
Per report from Mario Splivalo.
relcache reload works. In the patched code, a relcache entry in process of
being rebuilt doesn't get unhooked from the relcache hash table; which means
that if a cache flush occurs due to sinval queue overrun while we're
rebuilding it, the entry could get blown away by RelationCacheInvalidate,
resulting in crash or misbehavior. Fix by ensuring that an entry being
rebuilt has positive refcount, so it won't be seen as a target for removal
if a cache flush occurs. (This will mean that the entry gets rebuilt twice
in such a scenario, but that's okay.) It appears that the problem can only
arise within a transaction that has previously reassigned the relfilenode of
a pre-existing table, via TRUNCATE or a similar operation. Per bug #5412
from Rusty Conover.
Back-patch to 8.2, same as the patch that introduced the problem.
I think that the failure can't actually occur in 8.2, since it lacks the
rd_newRelfilenodeSubid optimization, but let's make it work like the later
branches anyway.
Patch by Heikki, slightly editorialized on by me.
after actually removing one, so that if we can't remove segments because
WAL archiving is lagging behind, we don't unnecessarily forbid streaming
the old not-yet-archived segments that are still perfectly valid. Per
suggestion from Fujii Masao.
doesn't take into account how far the WAL senders are. This way a hung
WAL sender doesn't prevent old WAL segments from being recycled/removed
in the primary, ultimately causing the disk to fill up. Instead add
standby_keep_segments setting to control how many old WAL segments are
kept in the primary. This also makes it more reliable to use streaming
replication without WAL archiving, assuming that you set
standby_keep_segments high enough.
Windows timezone name where the information in the registry is
incomplete, instead of aborting.
This fixes cases when the registry information is incomplete for
a timezone that is alphabetically before the one that is in use.
Per report from Alexander Forschner
At present, killing the startup process does not release any locks it holds,
so we must wait to stop the startup and walreceiver processes until all
read-only backends have exited. Without this patch, the startup and
walreceiver processes never exit, so the server gets permanently stuck in
a half-shutdown state.
Fujii Masao, with review, docs, and comment adjustments by me.
rather than only sort-of working as the previous attempt had left it.
Clean up some unnecessary differences between the way these were coded and
the way the YYYY case was coded. Update the regression test cases that
proved that it wasn't working.
recovery. We might want to relax this in the future, but ThisTimeLineID
isn't currently correct in backends during recovery, so the filename
returned was wrong.
Add missing completions for:
- ALTER SEQUENCE name OWNER TO
- ALTER TYPE name RENAME TO
- ALTER VIEW name ALTER COLUMN
- ALTER VIEW name OWNER TO
- ALTER VIEW name SET SCHEMA
Fix wrong completions for:
- ALTER FUNCTION/AGGREGATE name (arguments) ...
"(arguments)" has been ignored.
- ALTER ... SET SCHEMA
"SCHEMA" has been considered as a variable name.
is changed to match the hard-wired default. This avoids accumulating useless
catalog entries, and also provides a path for dropping the owning role without
using DROP OWNED BY. Per yesterday's complaint from Jaime Casanova, the
need to use DROP OWNED BY for that is less than obvious, so providing this
alternative method might save some user frustration.
be added during GRANT and can only be removed during REVOKE; and fix its
callers to not lie to it about the existing set of dependencies when
instantiating a formerly-default ACL. The previous coding accidentally failed
to malfunction so long as default ACLs contain only references to the object's
owning role, because that role is ignored by updateAclDependencies. However
this is obviously pretty fragile, as well as being an undocumented assumption.
The new coding is a few lines longer but IMO much clearer.
Those options do nothing right now, but might be wanted later, and in
any case it's confusing for the command to be interpreted as \dd if
anything is appended. Per Jaime Casanova.
This allows us to see what mode the server is in before it starts to
perform actions that can block or hang. Otherwise server messages
may not appear until after messages that say FATAL the database
server is starting up.
Windows, thanks to a feature in CRT called Parameter Validation.
Backpatch to 8.2, which is the oldest version supported on Windows. In
8.2 and 8.3 also backpatch the earlier change to use DEVNULL instead of
NULL_DEV #define for a /dev/null-like device. NULL_DEV was hard-coded to
"/dev/null" regardless of platform, which didn't work on Windows, while
DEVNULL works on all platforms. Restarting syslogger didn't work on
Windows on versions 8.3 and below because of that.
The error message now makes explicit reference to the GUC that must be changed
to fix the problem, using wording suggested by Tom Lane. Along the way,
rename the GUC from MaxWalSenders to max_wal_senders for consistency and
grep-ability.
constraint exclusion on an inheritance set that is the target of an UPDATE
or DELETE query. Per gripe from Marc Cousin. Back-patch to 8.4 where
the feature was introduced.
pg_xlog directory. This is essential for replaying WAL records that
were streamed from the master, after a standby server restart.
If a corrupt record is seen in a file restored from the archive or
streamed from the master, log it as a WARNING and keep retrying. If the
corruption is permanent, and not just a glitch in the whatever copies the
files to the archive or a network error not caught by CRC checks in TCP
for example, we will keep retrying and logging the WARNING indefinitely.
But that's better than shutting down completely, the standby is still
useful for running read-only queries. In PITR the recovery ends at such a
corrupt record, which is a bit questionable, but that's the behavior we
had in previous releases and we don't feel like chaning it now. It does
make sense for tools like pg_standby.
example to 'on or 'off' rather than 'true' or 'false', as shown
in docs. Add restartpoint_command. Add section header for recovery
target parameters, matching docs.
WAL record for btree delete contains a list of tids, even when backup
blocks are present. We follow the tids to their heap tuples, taking
care to follow LP_REDIRECT tuples. We ignore LP_DEAD tuples on the
understanding that they will always have xmin/xmax earlier than any
LP_NORMAL tuples referred to by killed index tuples. Iff all tuples
are LP_DEAD we return InvalidTransactionId. The heap relfilenode is
added to the WAL record, requiring API changes to pass down the heap
Relation. XLOG_PAGE_MAGIC updated.
by a superuser -- "ALTER USER f RESET setting" already disallows removing such a
setting.
Apply the same treatment to ALTER DATABASE d RESET ALL when run by a database
owner that's not superuser.
doing nothing, caused by naptime specified in milliseconds yet units of
pg_usleep() parameter is microseconds. Correctly specifying units
reduces call frequency by 1000. Reduction in CPU consumption verified.
Informix allows variables as argument to the embedded SQL command FREE. Given
that we only allow freeing cursors via FREE for compatibility reasons only we
should do the same.
commandline option "-i". This change fixes this and adds a test case. It also
honors #include_next, although this is probably never used for embedded SQL.
so that we won't try to attach any context printouts to messages that get
emitted while exiting. Per report from Dennis Koegel, the context functions
won't necessarily work after we've started shutting down the backend, and it
seems possible that debug_query_string could be pointing at freed storage
as well. The context information doesn't seem particularly relevant to
such messages anyway, so there's little lost by suppressing it.
Back-patch to all supported branches. I can only demonstrate a crash with
log_disconnections messages back to 8.1, but the risk seems real in 8.0 and
before anyway.
catalog entries via SearchSysCache and related operations. Although, at the
time that these callbacks are called by elog.c, we have not officially aborted
the current transaction, it still seems rather risky to initiate any new
catalog fetches. In all these cases the needed information is readily
available in the caller and so it's just a matter of a bit of extra notation
to pass it to the callback.
Per crash report from Dennis Koegel. I've concluded that the real fix for
his problem is to clear the error context stack at entry to proc_exit, but
it still seems like a good idea to make the callbacks a bit less fragile
for other cases.
Backpatch to 8.4. We could go further back, but the patch doesn't apply
cleanly. In the absence of proof that this fixes something and isn't just
paranoia, I'm not going to expend the effort.
was broken for a replication connection and no messages were
displayed on either standby or primary, at any debug level.
Connection messages needed to diagnose session drop/reconnect
events. Use LOG mode for now, discuss lowering in later releases.
present since 8.0 was never fully meaningful, since two recovery targets
cannot be specified. Refactor recovery target type to make this change
and associated code easier to understand. No change in function.
Bug report arising from internal support question.
field into WAL record and reset it from there, rather than using
FrozenTransactionId which can lead to some corner case bugs.
Problem report and suggested route to a fix from Heikki, details by me.
In PLy_spi_execute_plan, use the data-type specific Python-to-PostgreSQL
conversion function instead of passing everything through InputFunctionCall
as a string. The equivalent fix was already done months ago for function
parameters and return values, but this other gateway between Python and
PostgreSQL was apparently forgotten. As a result, data types that need
special treatment, such as bytea, would misbehave when used with
plpy.execute.
in recovery_end_command, it always came out as 0 because InRedo was
cleared before recovery_end_command was executed. Also, always take
ControlFileLock when reading checkpoint location for %r.
The recovery_end_command bug and the missing locking was present in 8.4
as well, that part of this patch will be backported separately.
to transformAggregateCall, instead of abusing fields in Aggref to carry them
temporarily. No change in functionality but hopefully the code is a bit
clearer now. Per gripe from Gokulakannan Somasundaram.
unable to read a stats file for reasons other than ENOENT, and having to reset
last_statrequest because it's later than current time in the collector.
Not clear if this will shed any light on the "pgstat wait timeout" business,
but it seems like a good idea in general.
In passing, do some message-style-police work on recently-added
pgstat_reset_shared_counters code.
corner cases that come up in certain timezones (apparently, only those with
lots and lots of distinct TZ transition rules, as far as I can gather from
a quick scan of their archives). Per suggestion from Jeevan Chalke.
Back-patch to 8.4. Possibly we need to push this into earlier releases
as well, but I'm hesitant to update them to the 64-bit tzcode without
more thought and testing.
by joining to pg_constraint.conindid, instead of the former technique of
joining indirectly through pg_depend. This is much more straightforward
and probably faster as well. I had originally desisted from changing these
queries when conindid was added because I was worried about losing
performance, but if we join on conrelid as well as conindid then the index
on conrelid can be used when pg_constraint is large.
instead of an exclusive lock.
The change is almost for code cleanup. Since there seems to be no
performance benefits from it, backports should not be needed.
Fujii Masao
The latter is considered unwarranted chumminess with the implementation,
and can lead to crashes with recent Perl versions.
Report and fix by Tim Bunce. Back-patch to all versions containing the
questionable coding pattern.
--single-transaction are both used and the failure happens in commit,
e.g. failed deferred trigger. Also properly free BEGIN/COMMIT result
structures from --single-transaction.
Per report from Dominic Bevacqua
when warning about column-level privileges. This is more useful than before
and makes the apparent duplication complained of by Piyush Newe not so
duplicate. Also fix lack of quote marks in a related message text.
Back-patch to 8.4, where column-level privileges were introduced.
Stephen Frost
unless (1) the @ isn't quoted and (2) the filename isn't empty. This guards
against unexpectedly treating usernames or other strings in "flat files"
as inclusion requests, as seen in a recent trouble report from Ed L.
The empty-filename case would be guaranteed to misbehave anyway, because our
subsequent path-munging behavior results in trying to read the directory
containing the current input file.
I think this might finally explain the report at
http://archives.postgresql.org/pgsql-bugs/2004-05/msg00132.php
of a crash after printing "authentication file token too long, skipping",
since I was able to duplicate that message (though not a crash) on a
platform where stdio doesn't refuse to read directories. We never got
far in investigating that problem, but now I'm suspicious that the trigger
condition was an @ in the flat password file.
Back-patch to all active branches since the problem can be demonstrated in all
branches except HEAD. The test case, creating a user named "@", doesn't cause
a problem in HEAD since we got rid of the flat password file. Nonetheless it
seems like a good idea to not consider quoted @ as a file inclusion spec,
so I changed HEAD too.
set ferror() but never set feof(). This is known to be the case for recent
glibc when trying to read a directory as a file, and might be true for other
platforms/cases too. Per report from Ed L. (There is more that we ought to
do about his report, but this is one easily identifiable issue.)
too, instead of duplicating the functionality (badly).
I renamed xml_init to pg_xml_init, because the former seemed just a bit too
generic to be safe as a global symbol. I considered likewise renaming
xml_ereport to pg_xml_ereport, but felt that the reference to ereport probably
made it sufficiently PG-centric already.
section, throw an error message saying explicitly that the label must go
before DECLARE. Per investigation of a recent pgsql-novice question,
this code did not work as intended in any modern PG version, maybe not ever.
Allowing such a thing would only create ambiguity anyway, so it seems better
to remove it than fix it.
Per bug #5352, this helps to provide a useful error message if the user
tries to do something presently unsupported, namely use a rowtype variable
as a member of a multiple-item INTO list.
formats; a null string must not be formatted as a numeric. The more exotic
formats latex and troff also incorrectly formatted all strings as numerics
when numericlocale was on.
Backpatch to 8.1 where numericlocale option was added.
This fixes bug #5355 reported by Andy Lester.
the fact that NetBSD/mips is currently broken, as per buildfarm member pika.
Also add regression tests to ensure that get_float8_nan and get_float4_nan
are exercised even on platforms where they are not needed by
float8in/float4in.
Zoltán Böszörményi and Tom Lane
We had originally made the stronger assumption that NOT A refutes any B
if B implies A, but this fails in three-valued logic, because we need to
prove B is false not just that it's not true. However the logic does
go through if B is equal to A.
Recognizing this limited case is enough to handle examples that arise when
we have simplified "bool_var = true" or "bool_var = false" to just "bool_var"
or "NOT bool_var". If we had not done that simplification then the
btree-operator proof logic would have been able to prove that the expressions
were contradictory, but only for identical expressions being compared to the
constants; so handling identical A and B covers all the same cases.
The motivation for doing this is to avoid unexpected asymmetrical behavior
when a partitioned table uses a boolean partitioning column, as in today's
gripe from Dominik Sander.
Back-patch to 8.2, which is as far back as predicate_refuted_by attempts to
do anything at all with NOTs.
how often we do SSL session key renegotiation. Can be set to
0 to disable renegotiation completely, which is required if
a broken SSL library is used (broken patches to CVE-2009-3555
a known cause) or when using a client library that can't do
renegotiation.
This was evidently broken by the CREATE TABLE OF TYPE patch. It would have
been noticed if anyone had bothered to try dumping and restoring the
regression database ...
will work whether or not the specified language is preinstalled. This
responds to some complaints about having to change test scripts because
plpgsql is preinstalled as of 9.0.
This operates in the same way as other CREATE OR REPLACE commands, ie,
it replaces everything but the ownership and ACL lists of an existing
entry, and requires the caller to have owner privileges for that entry.
While modifying an existing language has some use in development scenarios,
in typical usage all the "replaced" values come from pg_pltemplate so there
will be no actual change in the language definition. The reason for adding
this is mainly to allow programs to ensure that a language exists without
triggering an error if it already does exist.
This commit just adds and documents the new option. A followon patch
will use it to clean up some unpleasant cases in pg_dump and pg_regress.
"dumping data out of order is not supported" to "restoring data out of order
is not supported", because you get that error during pg_restore not pg_dump.
Also fix some comments that didn't look so good after being pgindented as
perhaps they did originally.
on a platform that doesn't support this operation. The former coding
would allow an unrelated errno to be reported, which would be quite
misleading. Not sure if this has anything to do with the current
buildfarm failures, but it's certainly bogus as-is.
Add some checks that seem logically necessary, in particular let's make
real sure that HS slave sessions cannot create temp tables. (If they did
they would think that temp tables belonging to the master's session with
the same BackendId were theirs. We *must* not allow myTempNamespace to
become set in a slave session.)
Change setval() and nextval() so that they are only allowed on temp sequences
in a read-only transaction. This seems consistent with what we allow for
table modifications in read-only transactions. Since an HS slave can't have a
temp sequence, this also provides a nicer cure for the setval PANIC reported
by Erik Rijkers.
Make the error messages more uniform, and have them mention the specific
command being complained of. This seems worth the trifling amount of extra
code, since people are likely to see such messages a lot more than before.
tuple, instead of the former cpu_tuple_cost. It is sane to charge less than
cpu_tuple_cost because Materialize never does any qual-checking or projection,
so it's got less overhead than most plan node types. In particular, we want
to have the same charge here as is charged for readout in cost_sort. That
avoids the problem recently exhibited by Teodor wherein the planner prefers
a useless sort over a materialize step in a context where a lot of rescanning
will happen. The rescan costs should be just about the same for both node
types, so make their estimates the same.
Not back-patching because all of the current logic for rescan cost estimates
is new in 9.0. The old handling of rescans is sufficiently not-sane that
changing this in that structure is a bit pointless, and might indeed cause
regressions.
- The message "server stopped" should be affected by the -s option, just
like "server started" already was.
- The message "could not start server" should consistently go to stderr.
enabled. Bypassing the kernel cache is counter-productive in that case,
because the archiver/walsender process will read from the WAL file
soon after it's written, and if it's not cached the read will cause
a physical read, eating I/O bandwidth available on the WAL drive.
Also, walreceiver process does unaligned writes, so disable O_DIRECT
in walreceiver process for that reason too.
segment of XLOG_BACKUP_END record even if the the record is placed
at a segment boundary. Furthermore the previous implementation could
return nonexistent segment file name when the boundary is in segments
that has "FE" suffix; We never use segments with "FF" suffix.
Backpatch to 8.0, where hot backup was introduced.
Reported by Fujii Masao.
old memory context in plpython. Before only one of them was marked
volatile, but per report from Zdenek Kotala, some compilers do the
wrong thing here.
ArrayRef expressions that are not in the immediate context of an INSERT or
UPDATE targetlist. Such cases never arise in stored rules, so ruleutils.c
hadn't tried to handle them. However, they do occur in the targetlists of
plans derived from such statements, and now that EXPLAIN VERBOSE tries to
print targetlists, we need some way to deal with the case.
I chose to represent an assignment ArrayRef as "array[subscripts] := source",
which is fairly reasonable and doesn't omit any information. However,
FieldStore is problematic because the planner will fold multiple assignments
to fields of the same composite column into one FieldStore, resulting in a
structure that is hard to understand at all, let alone display comprehensibly.
So in that case I punted and just made it print the source expression(s).
Backpatch to 8.4 --- the lack of functionality exists in older releases,
but doesn't seem to be important for lack of anything that would call it.
being assigned to, in case the expression to be assigned is a FieldStore that
would need to modify that value. The need for this was foreseen some time
ago, but not implemented then because we did not have arrays of composites.
Now we do, but the point evidently got overlooked in that patch. Net result
is that updating a field of an array element doesn't work right, as
illustrated if you try the new regression test on an unpatched backend.
Noted while experimenting with EXPLAIN VERBOSE, which has also got some issues
in this area.
Backpatch to 8.3, where arrays of composites were introduced.
is aborted, if they were created within the failed xact. This prevents
ExecutorEnd from being run on them, which is a good idea because they may
contain references to tables or other objects that no longer exist.
In particular this is hazardous when auto_explain is active, but it's
really rather surprising that nobody has seen an issue with this before.
I'm back-patching this to 8.4, since that's the first version that contains
auto_explain or an ExecutorEnd hook, but I wonder whether we shouldn't
back-patch further.
a separate archive entry for each BLOB, and use pg_dump's standard methods
for dealing with its ownership, ACL if any, and comment if any. This means
that switches like --no-owner and --no-privileges do what they're supposed
to. Preliminary testing says that performance is still reasonable even
with many blobs, though we'll have to see how that shakes out in the field.
KaiGai Kohei, revised by me
Newly supported syntax are:
- ALTER {TABLE|INDEX|TABLESPACE} {SET|RESET} with options
- ALTER TABLE ALTER COLUMN {SET|RESET} with options
- ALTER TABLE ALTER COLUMN SET STORAGE
- CREATE INDEX CONCURRENTLY
- CREATE INDEX ON (without name)
- CREATE INDEX ... USING with pg_am.amname instead of hard-corded names
- CREATE TRIGGER with events
- DROP AGGREGATE function with arguments
all the values derived from oldestXid, not just that field. Brain fade in
one of my patches associated with flat file removal, exposed by a report
from Fujii Masao.
With this change, xidVacLimit should always be valid, so remove a couple of
bits of complexity associated with the previous assumption that sometimes
it wouldn't get set right away.
NAMEDATALEN, so this code doesn't go nuts with smaller than default
BLCKSZ or larger than default NAMEDATALEN. The standard value is
still exactly 8000.
In addition, add support for a "payload" string to be passed along with
each notify event.
This implementation should be significantly more efficient than the old one,
and is also more compatible with Hot Standby usage. There is not yet any
facility for HS slaves to receive notifications generated on the master,
although such a thing is possible in future.
Joachim Wieland, reviewed by Jeff Davis; also hacked on by me.
Prevent use of another buggy version of Safe.pm.
Only register the exit handler if we have successfully created an interpreter.
Change log level of perl warnings from NOTICE to WARNING.
The infrastructure is there if in future we decide to allow
DBAs to specify extra modules that will be allowed in trusted code.
However, for now the relevant variables are declared as lexicals
rather than as package variables, so that they are not (or should not be)
accessible.
Mostly code from Tim Bunce, reviewed by Alex Hunsaker, with some
tweaks by me.
and use this in pq_getbyte_if_available.
It's only a limited implementation which swithes the whole emulation layer
no non-blocking mode, but that's enough as long as non-blocking is only
used during a short period of time, and only one socket is accessed during
this time.
and move the context information into errcontext instead of errmsg.
This makes them better conform to our guidelines.
Also remove a few errcode declarations that were providing the default
value ERRCODE_INTERNAL_ERROR.
all the data and using posix_fadvise to nudge the OS into flushing it
earlier. This also hopefully makes CREATE DATABASE avoid spamming the
cache.
Tests show a big speedup on Linux at least on some filesystems.
Idea and patch from Andres Freund.
The purpose of this change is to eliminate the need for every caller
of SearchSysCache, SearchSysCacheCopy, SearchSysCacheExists,
GetSysCacheOid, and SearchSysCacheList to know the maximum number
of allowable keys for a syscache entry (currently 4). This will
make it far easier to increase the maximum number of keys in a
future release should we choose to do so, and it makes the code
shorter, too.
Design and review by Tom Lane.
prefix, instead of assuming it will always be following the default layout.
All information we need is not available on Windows, but the number of
assumptions are at least fewer this way than before.
Based on suggestions from James William Pye.
defined. Its reference to CurrentMemoryContext causes link failures on some
platforms, evidently because the inline function gets compiled despite lack of
use. Per buildfarm member warthog.
where a database has a non-default tablespaceid. Pass thru MyDatabaseId
and MyDatabaseTableSpace to allow file path to be re-created in
standby and correct invalidation to take place in all cases.
Update and rework xact_commit_desc() debug messages.
Bug report from Tom by code inspection. Fix by me.
compilers, by applying a configure check to see if the compiler will accept
an unreferenced "static inline foo ..." function without warnings. It is
believed that such warnings are the only reason not to declare inlined
functions in headers, if the compiler understands "inline" at all.
Kurt Harriman
process. If startup waits on a buffer pin we send a request to all
backends to cancel themselves if they are holding the buffer pin
required and they are also waiting on a lock. If not, startup waits
until max_standby_delay before cancelling any backend waiting for
the requested buffer pin.
before we start analyzing the parent statement. This is to make it
more clear that the WITH isn't affected by anything in the parent.
I don't believe there's any actual bug here, because the stuff that
was being done before WITH didn't affect subqueries; but it's certainly
a potential for error (and apparently misled Marko into committing some
real errors...).
that happens to be composite itself. Per bug #5314 from Oleg Serov.
Backpatch to 8.0 --- 7.4 has got too many other shortcomings in
composite-type support to make this worth worrying about in that branch.
This patch allows the frame to start from CURRENT ROW (in either RANGE or
ROWS mode), and it also adds support for ROWS n PRECEDING and ROWS n FOLLOWING
start and end points. (RANGE value PRECEDING/FOLLOWING isn't there yet ---
the grammar works, but that's all.)
Hitoshi Harada, reviewed by Pavel Stehule
echo all the recovery.conf options. Don't emit the "initializing
recovery connections" message, which doesn't mean anything to a user.
Remove the "starting archive recovery" message and replace the
"automatic recovery in progress" message with a more informative message
saying whether the server is doing PITR, normal archive recovery, or
standby mode.
a partial WAL file, assume it's because the file is just being copied to
the archive and treat it the same as "file not found" in standby mode.
pg_standby has a similar check, so it seems reasonable to have the same
level of protection in the built-in standby mode.
several places, but for now only GIN uses it during index creation.
Using self-balanced tree greatly speeds up index creation in corner cases
with preordered data.
restoring from archive, the last WAL segment is not necessarily open at
the end of recovery. Fix assertion that assumed that.
Fujii Masao, fixing the assertion failure reported by Martin Pihlak.
The previous coding missed a bet by sometimes picking the "sorted" path
from query_planner even though hashing would be preferable. To fix, we have
to be willing to make the choice sooner. This contorts things a little bit,
but I thought of a factorization that makes it not too awful.
Move rd_targblock, rd_fsm_nblocks, and rd_vm_nblocks from relcache to the smgr
relation entries, so that they will get reset to InvalidBlockNumber whenever
an smgr-level flush happens. Because we now send smgr invalidation messages
immediately (not at end of transaction) when a relation truncation occurs,
this ensures that other backends will reset their values before they next
access the relation. We no longer need the unreliable assumption that a
VACUUM that's doing a truncation will hold its AccessExclusive lock until
commit --- in fact, we can intentionally release that lock as soon as we've
completed the truncation. This patch therefore reverts (most of) Alvaro's
patch of 2009-11-10, as well as my marginal hacking on it yesterday. We can
also get rid of assorted no-longer-needed relcache flushes, which are far more
expensive than an smgr flush because they kill a lot more state.
In passing this patch fixes smgr_redo's failure to perform visibility-map
truncation, and cleans up some rather dubious assumptions in freespace.c and
visibilitymap.c about when rd_fsm_nblocks and rd_vm_nblocks can be out of
date.
truncating the table and transaction commit. This isn't really making
it safe, but at least there is no good reason to do free space map
cleanup within the risk window. Don't lock out cancel interrupts
until we have to, either.
being called as aggregates, and to get the aggregate transition state memory
context if needed. Use it instead of poking directly into AggState and
WindowAggState in places that shouldn't know so much.
We should have done this in 8.4, probably, but better late than never.
Revised version of a patch by Hitoshi Harada.
recovery. It's zeroed out whenever a checkpoint is written, so the only
scenario where the removed code did anything is when you kill archive
recovery, remove recovery.conf, and start up the server, so that it goes
into crash recovery instead. That's a "don't do that" scenario, but it
seems better to not clear minRecoveryPoint but instead update it like we
do in archive recovery, which is what will now happen.
needed by nothing else.
The restructuring I just finished doing on cache management exposed to me how
silly this routine was. Its function was to go into the catcache and blow
away all entries related to a given relation when there was a relcache flush
on that relation. However, there is no point in removing a catcache entry
if the catalog row it represents is still valid --- and if it isn't valid,
there must have been a catcache entry flush on it, because that's triggered
directly by heap_update or heap_delete on the catalog row. So this routine
accomplished nothing except to blow away valid cache entries that we'd very
likely be wanting in the near future to help reconstruct the relcache entry.
Dumb.
On top of which, it required a subtle and easy-to-get-wrong attribute in
syscache definitions, ie, the column containing the OID of the related
relation if any. Removing that is a very useful maintenance simplification.
VACUUM FULL INPLACE), along with a boatload of subsidiary code and complexity.
Per discussion, the use case for this method of vacuuming is no longer large
enough to justify maintaining it; not to mention that we don't wish to invest
the work that would be needed to make it play nicely with Hot Standby.
Aside from the code directly related to old-style VACUUM FULL, this commit
removes support for certain WAL record types that could only be generated
within VACUUM FULL, redirect-pointer removal in heap_page_prune, and
nontransactional generation of cache invalidation sinval messages (the last
being the sticking point for Hot Standby).
We still have to retain all code that copes with finding HEAP_MOVED_OFF and
HEAP_MOVED_IN flag bits on existing tuples. This can't be removed as long
as we want to support in-place update from pre-9.0 databases.
as per my recent proposal.
First, teach IndexBuildHeapScan to not wait for INSERT_IN_PROGRESS or
DELETE_IN_PROGRESS tuples to commit unless the index build is checking
uniqueness/exclusion constraints. If it isn't, there's no harm in just
indexing the in-doubt tuple.
Second, modify VACUUM FULL/CLUSTER to suppress reverifying
uniqueness/exclusion constraint properties while rebuilding indexes of
the target relation. This is reasonable because these commands aren't
meant to deal with corrupted-data situations. Constraint properties
will still be rechecked when an index is rebuilt by a REINDEX command.
This gets us out of the problem that new-style VACUUM FULL would often
wait for other transactions while holding exclusive lock on a system
catalog, leading to probable deadlock because those other transactions
need to look at the catalogs too. Although the real ultimate cause of
the problem is a debatable choice to release locks early after modifying
system catalogs, changing that choice would require pretty serious
analysis and is not something to be undertaken lightly or on a tight
schedule. The present patch fixes the problem in a fairly reasonable
way and should also improve the speed of VACUUM FULL/CLUSTER a little bit.
of shared or nailed system catalogs. This has two key benefits:
* The new CLUSTER-based VACUUM FULL can be applied safely to all catalogs.
* We no longer have to use an unsafe reindex-in-place approach for reindexing
shared catalogs.
CLUSTER on nailed catalogs now works too, although I left it disabled on
shared catalogs because the resulting pg_index.indisclustered update would
only be visible in one database.
Since reindexing shared system catalogs is now fully transactional and
crash-safe, the former special cases in REINDEX behavior have been removed;
shared catalogs are treated the same as non-shared.
This commit does not do anything about the recently-discussed problem of
deadlocks between VACUUM FULL/CLUSTER on a system catalog and other
concurrent queries; will address that in a separate patch. As a stopgap,
parallel_schedule has been tweaked to run vacuum.sql by itself, to avoid
such failures during the regression tests.
If expand_dbname is non-zero and dbname contains an = sign, it is taken as
a conninfo string in exactly the same way as if it had been passed to
PQconnectdb. This is equivalent to the way PQsetdbLogin() works, allowing
PQconnectdbParams() to be a complete alternative.
Also improve the way the new function is called from psql and replace a
previously missed call to PQsetdbLogin() in psql. Additionally use
PQconnectdbParams() for pg_dump and friends, and the bin/scripts
command line utilities such as vacuumdb, createdb, etc.
Finally, update the documentation for the new parameter, as well as the
nuances of precedence in cases where key words are repeated or duplicated
in the conninfo string.
of old and new toast tables can be done either at the logical level (by
swapping the heaps' reltoastrelid links) or at the physical level (by swapping
the relfilenodes of the toast tables and their indexes). This is necessary
infrastructure for upcoming changes to support CLUSTER/VAC FULL on shared
system catalogs, where we cannot change reltoastrelid. The physical swap
saves a few catalog updates too.
We unfortunately have to keep the logical-level swap logic because in some
cases we will be adding or deleting a toast table, so there's no possibility
of a physical swap. However, that only happens as a consequence of schema
changes in the table, which we do not need to support for system catalogs,
so such cases aren't an obstacle for that.
In passing, refactor the cluster support functions a little bit to eliminate
unnecessarily-duplicated code; and fix the problem that while CLUSTER had
been taught to rename the final toast table at need, ALTER TABLE had not.
heap_sync() to the callers, because heap_sync() is sometimes called even
if the operation itself is WAL-logged. This eliminates the bogus unlogged
records from CLUSTER that Simon Riggs reported, patch by Fujii Masao.
DROP USER at the end of the cluster.sql test could fail, if the temp
table created in the previous session hadn't finished getting dropped.
Unluckily, I didn't see this in several repetitions of the parallel
regression tests, but it's popping up on quite a few buildfarm machines.
the relfilenode of currently-not-relocatable system catalogs.
1. Get rid of inval.c's dependency on relfilenode, by not having it emit
smgr invalidations as a result of relcache flushes. Instead, smgr sinval
messages are sent directly from smgr.c when an actual relation delete or
truncate is done. This makes considerably more structural sense and allows
elimination of a large number of useless smgr inval messages that were
formerly sent even in cases where nothing was changing at the
physical-relation level. Note that this reintroduces the concept of
nontransactional inval messages, but that's okay --- because the messages
are sent by smgr.c, they will be sent in Hot Standby slaves, just from a
lower logical level than before.
2. Move setNewRelfilenode out of catalog/index.c, where it never logically
belonged, into relcache.c; which is a somewhat debatable choice as well but
better than before. (I considered catalog/storage.c, but that seemed too
low level.) Rename to RelationSetNewRelfilenode.
3. Cosmetic cleanups of some other relfilenode manipulations.
relations (they don't live in pg_toast). This caused an Assert failure in
assert-enabled builds. So far as I can see, in a non-assert build it would
only have messed up the checks for conflicting names, so a failure would be
quite improbable but perhaps not impossible.
All callers of FindConversionByName() already do suitable permissions
checking already apart from this function, but this is not just dead
code removal: the unnecessary permissions check can actually lead to
spurious failures - there's no reason why inability to execute the
underlying function should prohibit renaming the conversion, for example.
(The error messages in these cases were also rather poor:
FindConversion would return InvalidOid, eventually leading to a complaint
that the conversion "did not exist", which was not correct.)
KaiGai Kohei
When a column is renamed, we recursively rename the same column in
all descendent tables. But if one of those tables also inherits that
column from a table outside the inheritance hierarchy rooted at the
named table, we must throw an error. The previous coding correctly
prohibited the rename when the parent had inherited the column from
elsewhere, but overlooked the case where the parent was OK but a child
table also inherited the same column from a second, unrelated parent.
For now, not backpatched due to lack of complaints from the field.
KaiGai Kohei, with further changes by me.
Reviewed by Bernd Helme and Tom Lane.
We show the number of buckets, the number of batches (and also the original
number if it has changed), and the peak space used by the hash table. Minor
executor changes to track peak space used.
the input values into a string. The two argument version also does the same
thing, but inserts delimiters between elements.
Original patch by Pavel Stehule, reviewed by David E. Wheeler and me.
matching before recursing instead of after. The DFA match eliminates
unworkable midpoint choices a lot faster than the recursive check, in most
cases, so doing it first can speed things up; particularly in pathological
cases such as recently exhibited by Michael Glaesemann.
In addition, apply some cosmetic changes that were applied upstream (in the
Tcl project) at the same time, in order to sync with upstream version 1.15
of regexec.c.
Upstream apparently intends to backpatch this, so I will too. The
pathological behavior could be unpleasant if encountered in the field,
which seems to justify any risk of introducing new bugs.
Tom Lane, reviewed by Donal K. Fellows of Tcl project
stage of required deadlock detection to allow re-enabling max_standby_delay
setting of -1, which is now essential in the absence of improved relation-
specific conflict resoluton. Requested by Greg Stark et al.
We need to free the OID list returned by ExecInsertIndexTuples to avoid
a query-lifespan memory leak. When many rows require rechecking, this
can be a significant leak --- it's even more than the space used for the
queued trigger events.
Dean Rasheed
There was a race condition where the receiving pipe could be closed by the
child thread if the main thread was pre-empted before it got a chance to
create a new one, and the dispatch thread ran to completion during that time.
One symptom of this is that rows in pg_listener could be dropped under
heavy load.
Analysis and original patch by Radu Ilie, with some small
modifications by Magnus Hagander.
Since all current and foreseeable future command tags will be pure ASCII,
there is no need to do conversion on them. This saves a few cycles and also
avoids polluting otherwise-pristine subtransaction memory contexts, which
is the cause of the backend memory leak exhibited in bug #5302. (Someday
we'll probably want to have a better method of determining whether
subtransaction contexts need to be kept around, but today is not that day.)
Backpatch to 8.0. The cycle-shaving aspect of this would work in 7.4
too, but without subtransactions the memory-leak aspect doesn't apply,
so it doesn't seem worth touching 7.4.
(failure to free col_lineptrs[] array elements) and exacerbated in the
current devel cycle (failure to free "wrap"). This resulted in moderate
bloat of psql over long script runs. Noted while testing bug #5302,
although what the reporter was complaining of was backend-side leakage.
false positives during Hot Standby conflict processing. Simple
patch to enhance conflict processing, following previous discussions.
Controlled by parameter minimize_standby_conflicts = on | off, with
default off allows measurement of performance impact to see whether
it should be set on all the time.
records for heap and btree. Minor change, mostly API changes to
pass through the required values. This is a simple change though
also provides the refactoring required for further enhancements
to conflict processing using the relOid. Changes only have effect
during Hot Standby.
PQconnectStartParams. These are analogous to PQconnectdb and PQconnectStart
respectively. They differ from the legacy functions in that they accept
two NULL-terminated arrays, keywords and values, rather than conninfo
strings. This avoids the need to build the conninfo string in cases
where it might be inconvenient to do so. Includes documentation.
Also modify psql to utilize PQconnectdbParams rather than PQsetdbLogin.
This allows the new config parameter application_name to be set, which
in turn is displayed in the pg_stat_activity view and included in CSV
log entries. This will also ensure both new functions get regularly
exercised.
Patch by Guillaume Lelarge with review and minor adjustments by
Joe Conway.
LogwrtRqst.Write can be set to non-existent FF log segment, we mustn't
try to send that in XLogSend().
Also fix similar bug in ReadRecord(), which I just introduced in the
ReadRecord() refactoring patch.
restore_command, if the connection to the primary server is lost. This
ensures that the standby can recover automatically, if the connection is
lost for a long time and standby falls behind so much that the required
WAL segments have been archived and deleted in the master.
This also makes standby_mode useful without streaming replication; the
server will keep retrying restore_command every few seconds until the
trigger file is found. That's the same basic functionality pg_standby
offers, but without the bells and whistles.
To implement that, refactor the ReadRecord/FetchRecord functions. The
FetchRecord() function introduced in the original streaming replication
patch is removed, and all the retry logic is now in a new function called
XLogReadPage(). XLogReadPage() is now responsible for executing
restore_command, launching walreceiver, and waiting for new WAL to arrive
from primary, as required.
This also changes the life cycle of walreceiver. When launched, it now only
tries to connect to the master once, and exits if the connection fails, or
is lost during streaming for any reason. The startup process detects the
death, and re-launches walreceiver if necessary.
- Allow (ineffective) use of 'require' in plperl
If the required module is not already loaded then it dies.
So "use strict;" now works in plperl.
- Pre-load the feature module if perl >= 5.10.
So "use feature :5.10;" now works in plperl.
- Stored procedure subs are now given names.
The names are not visible in ordinary use, but they make
tools like Devel::NYTProf and Devel::Cover much more useful.
- Simplified and generalized the subroutine creation code.
Now one code path for generating sub source code, not four.
Can generate multiple 'use' statements with specific imports
(which handles plperl.use_strict currently and can easily
be extended to handle a plperl.use_feature=':5.12' in future).
- Disallows use of Safe version 2.20 which is broken for PL/Perl.
http://rt.perl.org/rt3/Ticket/Display.html?id=72068
- Assorted minor optimizations by pre-growing data structures.
Patch from Tim Bunce, reviewed by Alex Hunsaker.
default of "plpgsql". This is more reasonable than it was when the DO patch
was written, because we have since decided that plpgsql should be installed
by default. Per discussion, having a parameter for this doesn't seem useful
enough to justify the risk of application breakage if the value is changed
unexpectedly.
These files have apparently been edited over the years by a dozen people
with as many different editor settings, which made the alignment of the
paragraphs quite inconsistent and ugly. I made a pass of M-q with Emacs
to straighten it out.
and implement OVERLAY() for bit strings and bytea.
In passing also convert text OVERLAY() to a true built-in, instead of
relying on a SQL function.
Leonardo F, reviewed by Kevin Grittner
You might think this is unnecessary since that interpreter is never used
to run code --- but it turns out that's wrong. As of Tcl 8.5, the "clock"
command (alone among builtin Tcl commands) is partially implemented by
loaded-on-demand Tcl code, which means that it fails if there's not
unknown-command support, and also that it's impossible to run it directly
in a safe interpreter. The way they get around the latter is that
Tcl_CreateSlave() automatically sets up an alias command that forwards any
execution of "clock" in a safe slave interpreter to its parent interpreter.
Thus, when attempting to execute "clock" in trusted pltcl, the command
actually executes in the "hold" interpreter, where it will fail if
unknown-command support hasn't been introduced by sourcing the standard
init.tcl script, which is done by Tcl_Init(). (This is a pretty dubious
design decision on the Tcl boys' part, if you ask me ... but they didn't.)
Back-patch all the way. It's not clear that anyone would try to use ancient
versions of pltcl with a recent Tcl, but it's not clear they wouldn't, either.
Also add a regression test using "clock", in branches that have regression
test support for pltcl.
Per recent trouble report from Kyle Bateman.
AbortTransaction or AbortSubTransaction, when trying to clean up after an
error that prevented (sub)transaction start from completing:
* access to TopTransactionResourceOwner that might not exist
* assert failure in AtEOXact_GUC, if AtStart_GUC not called yet
* assert failure or core dump in AfterTriggerEndSubXact, if
AfterTriggerBeginSubXact not called yet
Per testing by injecting elog(ERROR) at successive steps in StartTransaction
and StartSubTransaction. It's not clear whether all of these cases could
really occur in the field, but at least one of them is easily exposed by
simple stress testing, as per my accidental discovery yesterday.
the various disk-size-reporting functions will respond to query cancel
reasonably promptly even in very large databases. Per report from
Kevin Grittner.
woken by alarm we send SIGUSR1 to all backends requesting that they
check to see if they are blocking Startup process. If so, they throw
ERROR/FATAL as for other conflict resolutions. Deadlock stop gap
removed. max_standby_delay = -1 option removed to prevent deadlock.
Attributes can now have options, just as relations and tablespaces do, and
the reloptions code is used to parse, validate, and store them. For
simplicity and because these options are not performance critical, we store
them in a separate cache rather than the main relcache.
Thanks to Alex Hunsaker for the review.
PQescapeLiteral is similar to PQescapeStringConn, but it relieves the
caller of the need to know how large the output buffer should be, and
it provides the appropriate quoting (in addition to escaping special
characers within the string). PQescapeIdentifier provides similar
functionality for escaping identifiers.
Per recent discussion with Tom Lane.
Discuss the reasons for the lock type we hold on ProcArrayLock while deriving
the conflict list. Cover the idea of false positive conflicts and seemingly
strange effects on snapshot derivation.
that would've been WAL-logged if archiving was enabled. If we encounter
such records in archive recovery anyway, we know that some data is
missing from the log. A WARNING is emitted in that case.
Original patch by Fujii Masao, with changes by me.
binary, revert PGDLLIMPORT decoration of global variables. I'm not sure
if there's any real harm from unnecessary PGDLLIMPORTs, but these are all
internal variables that external modules really shouldn't be messing
with. ThisTimeLineID still needs PGDLLIMPORT.
walreceiver as whole into a dynamically loaded module, split the
libpq-specific parts of it into dynamically loaded module and keep the rest
in the main backend binary.
Although Tom fixed the Windows compilation problems with the old walreceiver
module already, this is a cleaner division of labour and makes the code
more readable. There's also the prospect of adding new transport methods
as pluggable modules in the future, which this patch makes easier, though for
now the API between libpqwalreceiver and walreceiver process should be
considered private.
The libpq-specific module is now in src/backend/replication/libpqwalreceiver,
and the part linked with postgres binary is in
src/backend/replication/walreceiver.c.
name already exists, so we'd get an error message about a "type" instead
of about a "relation", because the composite type code shares code with
relation creation.
