When materialized views were added, psql's \d commands were made to
treat them as a separate object category ... but not everyplace in the
documentation or comments got the memo.
Noted by David Johnston. Back-patch to 9.3 where matviews came in.
Discussion: https://postgr.es/m/CAKFQuwb27M3VXRhHErjCpkWwN9eKThbqWb1=trtoXi9_ejqPXQ@mail.gmail.com
On some platforms, -fpic fails for sufficiently large shared libraries.
We've mostly not hit that boundary yet, but there are some extensions
such as Citus and pglogical where it's becoming a problem. A bit of
research suggests that the penalty for -fPIC is small, in the
single-digit-percentage range --- and there's none at all on popular
platforms such as x86_64. So let's just default to -fPIC everywhere
and provide one less thing for extension developers to worry about.
Per complaint from Christoph Berg. Back-patch to all supported branches.
(I did not bother to touch the recently-removed Makefiles for sco and
unixware in the back branches, though. We'd have no way to test that
it doesn't break anything on those platforms.)
Discussion: https://postgr.es/m/20170529155850.qojdfrwkkqnjb3ap@msg.df7cb.de
pg_resetwal (formerly pg_resetxlog) doesn't insist on finding a matching
version number in pg_control, and that seems like an important thing to
preserve since recovering from corrupt pg_control is a prime reason to
need to run it. However, that means you can try to run it against a
data directory of a different major version, which is at best useless
and at worst disastrous. So as to provide some protection against that
type of pilot error, inspect PG_VERSION at startup and refuse to do
anything if it doesn't match. PG_VERSION is read-only after initdb,
so it's unlikely to get corrupted, and even if it were corrupted it would
be easy to fix by hand.
This hazard has been there all along, so back-patch to all supported
branches.
Michael Paquier, with some kibitzing by me
Discussion: https://postgr.es/m/f4b8eb91-b934-8a0d-b3cc-68f06e2279d1@enterprisedb.com
The cash_div_intX functions applied rint() to the result of the division.
That's not merely useless (because the result is already an integer) but
it causes precision loss for values larger than 2^52 or so, because of
the forced conversion to float8.
On the other hand, the cash_mul_fltX functions neglected to apply rint() to
their multiplication results, thus possibly causing off-by-one outputs.
Per C standard, arithmetic between any integral value and a float value is
performed in float format. Thus, cash_mul_flt4 and cash_div_flt4 produced
answers good to only about six digits, even when the float value is exact.
We can improve matters noticeably by widening the float inputs to double.
(It's tempting to consider using "long double" arithmetic if available,
but that's probably too much of a stretch for a back-patched fix.)
Also, document that cash_div_intX operators truncate rather than round.
Per bug #14663 from Richard Pistole. Back-patch to all supported branches.
Discussion: https://postgr.es/m/22403.1495223615@sss.pgh.pa.us
This is more secure, and saves a redirect since we no longer accept
plain HTTP connections on the website.
References in code comments should probably be updated too, but
that doesn't seem to need back-patching, whereas this does.
Also, in the 9.2 branch, remove suggestion that you can get the
source code via FTP, since that service will be shut down soon.
Daniel Gustafsson, with a few additional changes by me
Discussion: https://postgr.es/m/9A2C89A7-0BB8-41A8-B288-8B7BD09D7D44@yesql.se
This has to be backpatched to all supported releases so release markup
added to HEAD and copied to back branches matches the existing markup.
Reported-by: Peter Eisentraut
Discussion: 2b8a2552-fffa-f7c8-97c5-14db47a87731@2ndquadrant.com
Author: initial patch and sample markup by Peter Eisentraut
Backpatch-through: 9.2
Both views replace the umoptions field with NULL when the user does not
meet qualifications to see it. They used different qualifications, and
pg_user_mappings documented qualifications did not match its implemented
qualifications. Make its documentation and implementation match those
of user_mapping_options. One might argue for stronger qualifications,
but these have long, documented tenure. pg_user_mappings has always
exhibited this problem, so back-patch to 9.2 (all supported versions).
Michael Paquier and Feike Steenbergen. Reviewed by Jeff Janes.
Reported by Andrew Wheelwright.
Security: CVE-2017-7486
Commit 65c3bf19fd moved handling of the,
already then, deprecated requiressl parameter into conninfo_storeval().
The default PGREQUIRESSL environment variable was however lost in the
change resulting in a potentially silent accept of a non-SSL connection
even when set. Its documentation remained. Restore its implementation.
Also amend the documentation to mark PGREQUIRESSL as deprecated for
those not following the link to requiressl. Back-patch to 9.3, where
commit 65c3bf1 first appeared.
Behavior has been more complex when the user provides both deprecated
and non-deprecated settings. Before commit 65c3bf1, libpq operated
according to the first of these found:
requiressl=1
PGREQUIRESSL=1
sslmode=*
PGSSLMODE=*
(Note requiressl=0 didn't override sslmode=*; it would only suppress
PGREQUIRESSL=1 or a previous requiressl=1. PGREQUIRESSL=0 had no effect
whatsoever.) Starting with commit 65c3bf1, libpq ignored PGREQUIRESSL,
and order of precedence changed to this:
last of requiressl=* or sslmode=*
PGSSLMODE=*
Starting now, adopt the following order of precedence:
last of requiressl=* or sslmode=*
PGSSLMODE=*
PGREQUIRESSL=1
This retains the 65c3bf1 behavior for connection strings that contain
both requiressl=* and sslmode=*. It retains the 65c3bf1 change that
either connection string option overrides both environment variables.
For the first time, PGSSLMODE has precedence over PGREQUIRESSL; this
avoids reducing security of "PGREQUIRESSL=1 PGSSLMODE=verify-full"
configurations originating under v9.3 and later.
Daniel Gustafsson
Security: CVE-2017-7485
Some selectivity estimation functions run user-supplied operators over
data obtained from pg_statistic without security checks, which allows
those operators to leak pg_statistic data without having privileges on
the underlying tables. Fix by checking that one of the following is
satisfied: (1) the user has table or column privileges on the table
underlying the pg_statistic data, or (2) the function implementing the
user-supplied operator is leak-proof. If neither is satisfied, planning
will proceed as if there are no statistics available.
At least one of these is satisfied in most cases in practice. The only
situations that are negatively impacted are user-defined or
not-leak-proof operators on a security-barrier view.
Reported-by: Robert Haas <robertmhaas@gmail.com>
Author: Peter Eisentraut <peter_e@gmx.net>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Security: CVE-2017-7484
The reference "That is the topic of the next section." has been
incorrect since the materialized views documentation got inserted
between the section "rules-views" and "rules-update".
Author: Zertrin <postgres_wiki@zertrin.org>
Previously a detailed activity report by VACUUM VERBOSE ANALYZE was
described as an example of VACUUM in docs. But it had been obsolete
for a long time. For example, commit feb4f44d29
updated the content of that activity report in 2003, but we had
forgotten to update the example.
So basically we need to update the example. But since no one cared
about the details of VACUUM output and complained about that mistake
for such long time, per discussion on hackers, we decided to get rid
of the detailed activity report from the example and simplify it.
Back-patch to all supported versions.
Reported by Masahiko Sawada, patch by me.
Discussion: https://postgr.es/m/CAD21AoAGA2pB3p-CWmTkxBsbkZS1bcDGBLcYVcvcDxspG_XAfA@mail.gmail.com
These are only supported in to_char, not in the other direction, but the
documentation failed to mention that. Also, describe TZ/tz as printing the
time zone "abbreviation", not "name", because what they print is elsewhere
referred to that way. Per bug #14558.
Also add to the existing rather half-baked description of PROFILE,
which does exactly the same thing, but I think people use it differently.
Discussion: https://postgr.es/m/16461.1487361849@sss.pgh.pa.us
The CREATE INDEX CONCURRENTLY bug can only be triggered by row updates,
not inserts, since the problem would arise from an update incorrectly
being made HOT. Noted by Alvaro.
That was written when we still had "crypt" authentication, and it was
referring to the fact that an older client might support "crypt"
authentication but not "md5". But we haven't supported "crypt" for years.
(As soon as we add a new authentication mechanism that doesn't work with
MD5 hashes, we'll need a similar notice again. But this text as it's worded
now is just wrong.)
Backpatch to all supported versions.
Discussion: https://www.postgresql.org/message-id/9a7263eb-0980-2072-4424-440bb2513dc7@iki.fi
In addition to space accounted for by tuple_len, dead_tuple_len and
free_space, the table_len includes page overhead, the item pointers
table and padding bytes.
Backpatch to live branches.
When there is both a serialization failure and a unique violation,
throw the former rather than the latter. When initially pushed,
this was viewed as a feature to assist application framework
developers, so that they could more accurately determine when to
retry a failed transaction, but a test case presented by Ian
Jackson has shown that this patch can prevent serialization
anomalies in some cases where a unique violation is caught within a
subtransaction, the work of that subtransaction is discarded, and
no error is thrown. That makes this a bug fix, so it is being
back-patched to all supported branches where it is not already
present (i.e., 9.2 to 9.5).
Discussion: https://postgr.es/m/1481307991-16971-1-git-send-email-ian.jackson@eu.citrix.com
Discussion: https://postgr.es/m/22607.56276.807567.924144@mariner.uk.xensource.com
If the PAGER environment variable is set but contains an empty string,
psql would pass it to "sh" which would silently exit, causing whatever
query output we were printing to vanish entirely. This is quite
mystifying; it took a long time for us to figure out that this was the
cause of Joseph Brenner's trouble report. Rather than allowing that
to happen, we should treat this as another way to specify "no pager".
(We could alternatively treat it as selecting the default pager, but
it seems more likely that the former is what the user meant to achieve
by setting PAGER this way.)
Nonempty, but all-white-space, PAGER values have the same behavior, and
it's pretty easy to test for that, so let's handle that case the same way.
Most other cases of faulty PAGER values will result in the shell printing
some kind of complaint to stderr, which should be enough to diagnose the
problem, so we don't need to work harder than this. (Note that there's
been an intentional decision not to be very chatty about apparent failure
returns from the pager process, since that may happen if, eg, the user
quits the pager with control-C or some such. I'd just as soon not start
splitting hairs about which exit codes might merit making our own report.)
libpq's old PQprint() function was already on board with ignoring empty
PAGER values, but for consistency, make it ignore all-white-space values
as well.
It's been like this a long time, so back-patch to all supported branches.
Discussion: https://postgr.es/m/CAFfgvXWLOE2novHzYjmQK8-J6TmHz42G8f3X0SORM44+stUGmw@mail.gmail.com
Per bug #14441 from Mark Pether, the documentation could be misread,
mainly because some of the examples failed to show what happens with
a multicharacter "characters to trim" string. Also, while the text
description in most of these entries was fairly clear that the
"characters" argument is a set of characters not a substring to match,
some of them used variant wording that was a bit less clear.
trim() itself suffered from both deficiencies and was thus pretty
misinterpretable.
Also fix failure to explain which of LEADING/TRAILING/BOTH is the
default.
Discussion: https://postgr.es/m/20161130011710.6539.53657@wrigleys.postgresql.org
The documentation around the -b/--blobs option to pg_dump seemed to
imply that it might be possible to add blobs to a "schema-only" dump or
similar. Clarify that blobs are data and therefore will only be
included in dumps where data is being included, even when -b is used to
request blobs be included.
The -b option has been around since before 9.2, so back-patch to all
supported branches.
Discussion: https://postgr.es/m/20161119173316.GA13284@tamriel.snowman.net
Create a section specifically for the syntactic rules around whole-row
variable usage, such as expansion of "foo.*". This was previously
documented only haphazardly, with some critical info buried in
unexpected places like xfunc-sql-composite-functions. Per repeated
questions in different mailing lists.
Discussion: <16288.1479610770@sss.pgh.pa.us>
There are assorted references to RETURNING in Part II, but nothing
that would qualify as an explanation of the feature, which seems
like an oversight considering how useful it is. Add something.
Noted while looking for a place to point a cross-reference to ...
For a very long time, pltcl's spi_exec and spi_execp commands have had
a behavior of storing the current row number as an element of output
arrays, but this was never documented. Fix that.
For an equally long time, pltcl_trigger_handler had a behavior of silently
ignoring ".tupno" as an output column name, evidently so that the result
of spi_exec could be used directly as a trigger result tuple. Not sure
how useful that really is, but in any case it's bad that it would break
attempts to use ".tupno" as an actual column name. We can fix it by not
checking for ".tupno" until after we check for a column name match. This
comports with the effective behavior of spi_exec[p] that ".tupno" is only
magic when you don't have an actual column named that.
In passing, wordsmith the description of returning modified tuples from
a pltcl trigger.
Noted while working on Jim Nasby's patch to support composite results
from pltcl. The inability to return trigger tuples using ".tupno" as
a column name is a bug, so back-patch to all supported branches.
Replace "Full path to ..." with "Full path name of ...". At least one
user has misinterpreted the existing wording as meaning "Directory
containing ...".
It was perhaps not entirely clear that internal self-references shouldn't
be schema-qualified even if the view name is written with a schema.
Spell it out.
Discussion: <871sznz69m.fsf@metapensiero.it>
Evidently an oversight in commit 729205571. Back-patch to 9.2 where
privileges for types were introduced.
Report: <20160922173517.8214.88959@wrigleys.postgresql.org>
These worked as-is until around 7.0, but fail in newer versions because
there are more operators named "#". Besides it's a bit inconsistent that
only two of the examples on this page lack type names on their constants.
Report: <20160923081530.1517.75670@wrigleys.postgresql.org>
Previously, we threw an error if a dynamic timezone abbreviation did not
match any abbreviation recorded in the referenced IANA time zone entry.
That seemed like a good consistency check at the time, but it turns out
that a number of the abbreviations in the IANA database are things that
Olson and crew made up out of whole cloth. Their current policy is to
remove such names in favor of using simple numeric offsets. Perhaps
unsurprisingly, a lot of these made-up abbreviations have varied in meaning
over time, which meant that our commit b2cbced9e and later changes made
them into dynamic abbreviations. So with newer IANA database versions
that don't mention these abbreviations at all, we fail, as reported in bug
#14307 from Neil Anderson. It's worse than just a few unused-in-the-wild
abbreviations not working, because the pg_timezone_abbrevs view stops
working altogether (since its underlying function tries to compute the
whole view result in one call).
We considered deleting these abbreviations from our abbreviations list, but
the problem with that is that we can't stay ahead of possible future IANA
changes. Instead, let's leave the abbreviations list alone, and treat any
"orphaned" dynamic abbreviation as just meaning the referenced time zone.
It will behave a bit differently than it used to, in that you can't any
longer override the zone's standard vs. daylight rule by using the "wrong"
abbreviation of a pair, but that's better than failing entirely. (Also,
this solution can be interpreted as adding a small new feature, which is
that any abbreviation a user wants can be defined as referencing a time
zone name.)
Back-patch to all supported branches, since this problem affects all
of them when using tzdata 2016f or newer.
Report: <20160902031551.15674.67337@wrigleys.postgresql.org>
Discussion: <6189.1472820913@sss.pgh.pa.us>
The decision to reuse values of parameters from a previous connection
has been based on whether the new target is a conninfo string. Add this
means of overriding that default. This feature arose as one component
of a fix for security vulnerabilities in pg_dump, pg_dumpall, and
pg_upgrade, so back-patch to 9.1 (all supported versions). In 9.3 and
later, comment paragraphs that required update had already-incorrect
claims about behavior when no connection is open; fix those problems.
Security: CVE-2016-5424
If ANALYZE found no repeated non-null entries in its sample, it set the
column's stadistinct value to -1.0, intending to indicate that the entries
are all distinct. But what this value actually means is that the number
of distinct values is 100% of the table's rowcount, and thus it was
overestimating the number of distinct values by however many nulls there
are. This could lead to very poor selectivity estimates, as for example
in a recent report from Andreas Joseph Krogh. We should discount the
stadistinct value by whatever we've estimated the nulls fraction to be.
(That is what will happen if we choose to use a negative stadistinct for
a column that does have repeated entries, so this code path was just
inconsistent.)
In addition to fixing the stadistinct entries stored by several different
ANALYZE code paths, adjust the logic where get_variable_numdistinct()
forces an "all distinct" estimate on the basis of finding a relevant unique
index. Unique indexes don't reject nulls, so there's no reason to assume
that the null fraction doesn't apply.
Back-patch to all supported branches. Back-patching is a bit of a judgment
call, but this problem seems to affect only a few users (else we'd have
identified it long ago), and it's bad enough when it does happen that
destabilizing plan choices in a worse direction seems unlikely.
Patch by me, with documentation wording suggested by Dean Rasheed
Report: <VisenaEmail.26.df42f82acae38a58.156463942b8@tc7-visena>
Discussion: <16143.1470350371@sss.pgh.pa.us>
The help message for pg_basebackup specifies that the numbers 0 through 9
are accepted as valid values of -Z option. But, previously -Z 0 was rejected
as an invalid compression level.
Per discussion, it's better to make pg_basebackup treat 0 as valid
compression level meaning no compression, like pg_dump.
Back-patch to all supported versions.
Reported-By: Jeff Janes
Reviewed-By: Amit Kapila
Discussion: CAMkU=1x+GwjSayc57v6w87ij6iRGFWt=hVfM0B64b1_bPVKRqg@mail.gmail.com
This text was added by commit ff213239c, and not long thereafter obsoleted
by commit 4adc2f72a (which made the test depend on NBuffers instead); but
nobody noticed the need for an update. Commit 9563d5b5e adds some further
dependency on maintenance_work_mem, but the existing verbiage seems to
cover that with about as much precision as we really want here. Let's
just take it all out rather than leaving ourselves open to more errors of
omission in future. (That solution makes this change back-patchable, too.)
Noted by Peter Geoghegan.
Discussion: <CAM3SWZRVANbj9GA9j40fAwheQCZQtSwqTN1GBTVwRrRbmSf7cg@mail.gmail.com>
The docs failed to explain that LIKE INCLUDING INDEXES would not preserve
the names of indexes and associated constraints. Also, it wasn't mentioned
that EXCLUDE constraints would be copied by this option. The latter
oversight seems enough of a documentation bug to justify back-patching.
In passing, do some minor copy-editing in the same area, and add an entry
for LIKE under "Compatibility", since it's not exactly a faithful
implementation of the standard's feature.
Discussion: <20160728151154.AABE64016B@smtp.hushmail.com>
The description of udt_privileges view contained an incorrect copy-pasted word.
Back-patch to 9.2 where udt_privileges view was added.
Author: Alexander Law
The SQL standard appears to specify that IS [NOT] NULL's tests of field
nullness are non-recursive, ie, we shouldn't consider that a composite
field with value ROW(NULL,NULL) is null for this purpose.
ExecEvalNullTest got this right, but eval_const_expressions did not,
leading to weird inconsistencies depending on whether the expression
was such that the planner could apply constant folding.
Also, adjust the docs to mention that IS [NOT] DISTINCT FROM NULL can be
used as a substitute test if a simple null check is wanted for a rowtype
argument. That motivated reordering things so that IS [NOT] DISTINCT FROM
is described before IS [NOT] NULL. In HEAD, I went a bit further and added
a table showing all the comparison-related predicates.
Per bug #14235. Back-patch to all supported branches, since it's certainly
undesirable that constant-folding should change the semantics.
Report and patch by Andrew Gierth; assorted wordsmithing and revised
regression test cases by me.
Report: <20160708024746.1410.57282@wrigleys.postgresql.org>
Document that index storage is dependent on the operating system's
collation library ordering, and any change in that ordering can create
invalid indexes.
Discussion: 20160617154311.GB19359@momjian.us
Backpatch-through: 9.1
If there's anyplace in our SGML docs that explains this behavior, I can't
find it right at the moment. Add an explanation in "Dependency Tracking"
which seems like the authoritative place for such a discussion. Per
gripe from Michelle Schwan.
While at it, update this section's example of a dependency-related
error message: they last looked like that in 8.3. And remove the
explanation of dependency updates from pre-7.3 installations, which
is probably no longer worth anybody's brain cells to read.
The bogus error message example seems like an actual documentation bug,
so back-patch to all supported branches.
Discussion: <20160620160047.5792.49827@wrigleys.postgresql.org>
Dilian Palauzov pointed out in bug #14201 that the docs failed to mention
the possibility of %R producing '(' due to an unmatched parenthesis.
He proposed just adding that in the same style as the other options were
listed; but it seemed to me that the sentence was already nearly
unintelligible, so I rewrote it a bit more extensively.
Report: <20160619121113.5789.68274@wrigleys.postgresql.org>
Document these as "nearest integer >= argument" and "nearest integer <=
argument", which will hopefully be less confusing than the old formulation.
New wording is from Matlab via Dean Rasheed.
I changed the pg_description entries as well as the SGML docs. In the
back branches, this will only affect installations initdb'd in the future,
but it should be harmless otherwise.
Discussion: <CAEZATCW3yzJo-NMSiQs5jXNFbTsCEftZS-Og8=FvFdiU+kYuSA@mail.gmail.com>
The server hasn't paid attention to the TZ environment variable since
commit ca4af308c3, but that commit missed removing this documentation
reference, as did commit d883b916a9 which added the reference where
it now belongs (initdb).
Back-patch to 9.2 where the behavior changed. Also back-patch
d883b916a9 as needed.
Matthew Somerville
Dead or half-dead index leaf pages were incorrectly reported as live, as a
consequence of a code rearrangement I made (during a moment of severe brain
fade, evidently) in commit d287818eb5.
The index metapage was not counted in index_size, causing that result to
not agree with the actual index size on-disk.
Index root pages were not counted in internal_pages, which is inconsistent
compared to the case of a root that's also a leaf (one-page index), where
the root would be counted in leaf_pages. Aside from that inconsistency,
this could lead to additional transient discrepancies between the reported
page counts and index_size, since it's possible for pgstatindex's scan to
see zero or multiple pages marked as BTP_ROOT, if the root moves due to
a split during the scan. With these fixes, index_size will always be
exactly one page more than the sum of the displayed page counts.
Also, the index_size result was incorrectly documented as being measured in
pages; it's always been measured in bytes. (While fixing that, I couldn't
resist doing some small additional wordsmithing on the pgstattuple docs.)
Including the metapage causes the reported index_size to not be zero for
an empty index. To preserve the desired property that the pgstattuple
regression test results are platform-independent (ie, BLCKSZ configuration
independent), scale the index_size result in the regression tests.
The documentation issue was reported by Otsuka Kenji, and the inconsistent
root page counting by Peter Geoghegan; the other problems noted by me.
Back-patch to all supported branches, because this has been broken for
a long time.
Clarify the description of which transactions will block a CREATE INDEX
CONCURRENTLY command from proceeding, and mention that the index might
still not be usable after CREATE INDEX completes. (This happens if the
index build detected broken HOT chains, so that pg_index.indcheckxmin gets
set, and there are open old transactions preventing the xmin horizon from
advancing past the index's initial creation. I didn't want to explain what
broken HOT chains are, though, so I omitted an explanation of exactly when
old transactions prevent the index from being used.)
Per discussion with Chris Travers. Back-patch to all supported branches,
since the same text appears in all of them.
In runtime.sgml, the old formulas for calculating the reasonable
values of SEMMNI and SEMMNS were incorrect. They have forgotten to
count the number of semaphores which both the checkpointer process
(introduced in 9.2) and the background worker processes (introduced
in 9.3) need.
This commit fixes those formulas so that they count the number of
semaphores which the checkpointer process and the background worker
processes need.
Report and patch by Kyotaro Horiguchi. Only the patch for 9.3 was
modified by me. Back-patch to 9.2 where the checkpointer process was
added and the number of needed semaphores was increased.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Backpatch: 9.2
Discussion: http://www.postgresql.org/message-id/20160203.125119.66820697.horiguchi.kyotaro@lab.ntt.co.jp
Many automated test suites call pg_ctl. Buildfarm members axolotl,
hornet, mandrill, shearwater, sungazer and tern have failed when server
shutdown took longer than the pg_ctl default 60s timeout. This addition
permits slow hosts to easily raise the timeout without us editing a
--timeout argument into every test suite pg_ctl call. Back-patch to 9.1
(all supported versions) for the sake of automated testing.
Reviewed by Tom Lane.
Get rid of the false implication that PRIMARY KEY is exactly equivalent to
UNIQUE + NOT NULL. That was more-or-less true at one time in our
implementation, but the standard doesn't say that, and we've grown various
features (many of them required by spec) that treat a pkey differently from
less-formal constraints. Per recent discussion on pgsql-general.
I failed to resist the temptation to do some other wordsmithing in the
same area.
As pointed out by Michael Paquier, recovery_min_apply_delay didn't exist
in 9.0-9.3, making the release note text not very useful. Instead make it
talk about recovery_target_xid, which did exist then.
9.0 is already out of support, but we can fix the text in the newer
branches' copies of its release notes.
Common mathematical convention is that exponentiation associates right to
left. We aren't going to change the parser for this, but we could note
it in the operator's description. (It's already noted in the operator
precedence/associativity table, but users might not look there.)
Per bug #13829 from Henrik Pauli.
Tone down an overly strong statement about which pseudo-types PLs are
likely to allow. Add "event_trigger" to the list, as well as
"pg_ddl_command" in 9.5/HEAD. Back-patch to 9.3 where event_trigger
was added.
This has worked that way for a long time, maybe always, but you would
not have known it from the documentation. Also back-patch the notes
I added to HEAD earlier today about behavior of the "-f -" switch,
which likewise have been valid for many releases.
In commit 1ea0c73c2 I added a section to user-manag.sgml about how to drop
roles that own objects; but as pointed out by Stephen Frost, I neglected
that shared objects (databases or tablespaces) may need special treatment.
Fix that. Back-patch to supported versions, like the previous patch.
The POSIX standard for tar headers requires archive member sizes to be
printed in octal with at most 11 digits, limiting the representable file
size to 8GB. However, GNU tar and apparently most other modern tars
support a convention in which oversized values can be stored in base-256,
allowing any practical file to be a tar member. Adopt this convention
to remove two limitations:
* pg_dump with -Ft output format failed if the contents of any one table
exceeded 8GB.
* pg_basebackup failed if the data directory contained any file exceeding
8GB. (This would be a fatal problem for installations configured with a
table segment size of 8GB or more, and it has also been seen to fail when
large core dump files exist in the data directory.)
File sizes under 8GB are still printed in octal, so that no compatibility
issues are created except in cases that would have failed entirely before.
In addition, this patch fixes several bugs in the same area:
* In 9.3 and later, we'd defined tarCreateHeader's file-size argument as
size_t, which meant that on 32-bit machines it would write a corrupt tar
header for file sizes between 4GB and 8GB, even though no error was raised.
This broke both "pg_dump -Ft" and pg_basebackup for such cases.
* pg_restore from a tar archive would fail on tables of size between 4GB
and 8GB, on machines where either "size_t" or "unsigned long" is 32 bits.
This happened even with an archive file not affected by the previous bug.
* pg_basebackup would fail if there were files of size between 4GB and 8GB,
even on 64-bit machines.
* In 9.3 and later, "pg_basebackup -Ft" failed entirely, for any file size,
on 64-bit big-endian machines.
In view of these potential data-loss bugs, back-patch to all supported
branches, even though removal of the documented 8GB limit might otherwise
be considered a new feature rather than a bug fix.
In commit a5ec86a7c7 I wrote a quick hack
that reduced the number of TeX string pool entries created while converting
our documentation to PDF form. That held the fort for awhile, but as of
HEAD we're back up against the same limitation. It turns out that the
original coding of \FlowObjectSetup actually results in *three* string pool
entries being generated for every "flow object" (that is, potential
cross-reference target) in the documentation, and my previous hack only got
rid of one of them. With a little more care, we can reduce the string
count to one per flow object plus one per actually-cross-referenced flow
object (about 115000 + 5000 as of current HEAD); that should work until
the documentation volume roughly doubles from where it is today.
As a not-incidental side benefit, this change also causes pdfjadetex to
stop emitting unreferenced hyperlink anchors (bookmarks) into the PDF file.
It had been making one willy-nilly for every flow object; now it's just one
per actually-cross-referenced object. This results in close to a 2X
savings in PDF file size. We will still want to run the output through
"jpdftweak" to get it to be compressed; but we no longer need removal of
unreferenced bookmarks, so we might be able to find a quicker tool for
that step.
Although the failure only affects HEAD and US-format output at the moment,
9.5 cannot be more than a few pages short of failing likewise, so it
will inevitably fail after a few rounds of minor-version release notes.
I don't have a lot of faith that we'll never hit the limit in the older
branches; and anyway it would be nice to get rid of jpdftweak across the
board. Therefore, back-patch to all supported branches.
