when scanning a table that we need all the columns from. In case of
SELECT INTO, we have to check that the hasoids flag matches the desired
output type, too. Per report from Mike Mascari.
for sure...). Rather than relying on the query context of a rangetable
entry to identify what permissions it wants checked, store a full AclMode
mask in each RTE, and check exactly those bits. This allows an RTE
specifying, say, INSERT privilege on a view to be copied into a derived
UPDATE query without changing meaning. Per recent discussion thread.
initdb forced due to change of stored rule representation.
intended to allow application authors to insulate themselves from
changes to the default value of 'default_with_oids' in future releases
of PostgreSQL.
This patch also fixes a bug in the earlier implementation of the
'default_with_oids' GUC variable: code in gram.y should not examine
the value of GUC variables directly due to synchronization issues.
pointer type when it is not necessary to do so.
For future reference, casting NULL to a pointer type is only necessary
when (a) invoking a function AND either (b) the function has no prototype
OR (c) the function is a varargs function.
regular qpqual ('filter condition'), add special-purpose code to
nodeIndexscan.c to recheck them. This ends being almost no net addition
of code, because the removal of planner code balances out the extra
executor code, but it is significantly more efficient when a lossy
operator is involved in an OR indexscan. The old implementation had
to recheck the entire indexqual in such cases.
about whether it is applied before or after eval_const_expressions().
I believe there were some corner cases where the system would fail to
recognize that a partial index is applicable because of the previous
inconsistency. Store normal rather than 'implicit AND' representations
of constraints and index predicates in the catalogs.
initdb forced due to representation change of constraints/predicates.
shut down cleanly if the plan node is ReScanned before the SRFs are run
to completion. This fixes the problem for SQL-language functions, but
still need work on functions using the SRF_XXX() macros.
proposal for eventually deprecating OIDs on user tables that I posted
earlier to pgsql-hackers. pg_dump now always specifies WITH OIDS or
WITHOUT OIDS when dumping a table. The documentation has been updated.
Neil Conway
the hashclauses field of the parent HashJoin. This avoids problems with
duplicated links to SubPlans in hash clauses, as per report from
Andrew Holm-Hansen.
pghackers proposal of 8-Nov. All the existing cross-type comparison
operators (int2/int4/int8 and float4/float8) have appropriate support.
The original proposal of storing the right-hand-side datatype as part of
the primary key for pg_amop and pg_amproc got modified a bit in the event;
it is easier to store zero as the 'default' case and only store a nonzero
when the operator is actually cross-type. Along the way, remove the
long-since-defunct bigbox_ops operator class.
Remove the 'strategy map' code, which was a large amount of mechanism
that no longer had any use except reverse-mapping from procedure OID to
strategy number. Passing the strategy number to the index AM in the
first place is simpler and faster.
This is a preliminary step in planned support for cross-datatype index
operations. I'm committing it now since the ScanKeyEntryInitialize()
API change touches quite a lot of files, and I want to commit those
changes before the tree drifts under me.
discussion on pgsql-hackers: in READ COMMITTED mode we just have to force
a QuerySnapshot update in the trigger, but in SERIALIZABLE mode we have
to run the scan under a current snapshot and then complain if any rows
would be updated/deleted that are not visible in the transaction snapshot.
to allow es_snapshot to be set to SnapshotNow rather than a query snapshot.
This solves a bug reported by Wade Klaver, wherein triggers fired as a
result of RI cascade updates could misbehave.
now able to cope with assigning new relfilenode values to nailed-in-cache
indexes, so they can be reindexed using the fully crash-safe method. This
leaves only shared system indexes as special cases. Remove the 'index
deactivation' code, since it provides no useful protection in the shared-
index case. Require reindexing of shared indexes to be done in standalone
mode, but remove other restrictions on REINDEX. -P (IgnoreSystemIndexes)
now prevents using indexes for lookups, but does not disable index updates.
It is therefore safe to allow from PGOPTIONS. Upshot: reindexing system catalogs
can be done without a standalone backend for all cases except
shared catalogs.
really general fix might be difficult, I believe the only case where
AtCommit_Notify could see an uncommitted tuple is where the other guy
has just unlistened and not yet committed. The best solution seems to
be to just skip updating that tuple, on the assumption that the other
guy does not want to hear about the notification anyway. This is not
perfect --- if the other guy rolls back his unlisten instead of committing,
then he really should have gotten this notify. But to do that, we'd have
to wait to see if he commits or not, or make UNLISTEN hold exclusive lock
on pg_listener until commit. Either of these answers is deadlock-prone,
not to mention horrible for interactive performance. Do it this way
for now. (What happened to that project to do LISTEN/NOTIFY in memory
with no table, anyway?)
handling many-way scans: instead of re-evaluating all prior indexscan
quals to see if a tuple has been fetched more than once, use a hash table
indexed by tuple CTID. But fall back to the old way if the hash table
grows to exceed SortMem.
as well as the hash function (formerly the comparison function was hardwired
as memcmp()). This makes it possible to eliminate the special-purpose
hashtable management code in execGrouping.c in favor of using dynahash to
manage tuple hashtables; which is a win because dynahash knows how to expand
a hashtable when the original size estimate was too small, whereas the
special-purpose code was too stupid to do that. (See recent gripe from
Stephan Szabo about poor performance when hash table size estimate is way
off.) Free side benefit: when using string_hash, the default comparison
function is now strncmp() instead of memcmp(). This should eliminate some
part of the overhead associated with larger NAMEDATALEN values.
be anything yielding an array of the proper kind, not only sub-ARRAY[]
constructs; do subscript checking at runtime not parse time. Also,
adjust array_cat to make array || array comply with the SQL99 spec.
Joe Conway
yet, though). Avoid using nth() to fetch tlist entries; provide a
common routine get_tle_by_resno() to search a tlist for a particular
resno. This replaces a couple uses of nth() and a dozen hand-coded
search loops. Also, replace a few uses of nth(length-1, list) with
llast().
error, if any input element is NULL. This is not what we ultimately want,
but until arrays can have NULL elements, it will have to do. Patch from
Joe Conway.
It also works to create a non-polymorphic aggregate from polymorphic
functions, should you want to do that. Regression test added, docs still
lacking. By Joe Conway, with some kibitzing from Tom Lane.
ANYELEMENT. The effect is to postpone typechecking of the function
body until runtime. Documentation is still lacking.
Original patch by Joe Conway, modified to postpone type checking
by Tom Lane.
'scalar op ALL (array)', where the operator is applied between the
lefthand scalar and each element of the array. The operator must
yield boolean; the result of the construct is the OR or AND of the
per-element results, respectively.
Original coding by Joe Conway, after an idea of Peter's. Rewritten
by Tom to keep the implementation strictly separate from subqueries.
comparison functions), replacing the highly bogus bitwise array_eq. Create
a btree index opclass for ANYARRAY --- it is now possible to create indexes
on array columns.
Arrange to cache the results of catalog lookups across multiple array
operations, instead of repeating the lookups on every call.
Add string_to_array and array_to_string functions.
Remove singleton_array, array_accum, array_assign, and array_subscript
functions, since these were for proof-of-concept and not intended to become
supported functions.
Minor adjustments to behavior in some corner cases with empty or
zero-dimensional arrays.
Joe Conway (with some editorializing by Tom Lane).
specific hash functions used by hash indexes, rather than the old
not-datatype-aware ComputeHashFunc routine. This makes it safe to do
hash joining on several datatypes that previously couldn't use hashing.
The sets of datatypes that are hash indexable and hash joinable are now
exactly the same, whereas before each had some that weren't in the other.
extensions to support our historical behavior. An aggregate belongs
to the closest query level of any of the variables in its argument,
or the current query level if there are no variables (e.g., COUNT(*)).
The implementation involves adding an agglevelsup field to Aggref,
and treating outer aggregates like outer variables at planning time.
when the plan is ReScanned, we don't have to rebuild the hash table
if there is no parameter change for its child node. This idea has
been used for a long time in Sort and Material nodes, but was not in
the hash code till now.
introducing new 'FastList' list-construction subroutines to use in
hot spots. This avoids the O(N^2) behavior of repeated lappend's
by keeping a tail pointer, while not changing behavior by reversing
list order as the lcons() method would do.
of an index can now be a computed expression instead of a simple variable.
Restrictions on expressions are the same as for predicates (only immutable
functions, no sub-selects). This fixes problems recently introduced with
inlining SQL functions, because the inlining transformation is applied to
both expression trees so the planner can still match them up. Along the
way, improve efficiency of handling index predicates (both predicates and
index expressions are now cached by the relcache) and fix 7.3 oversight
that didn't record dependencies of predicate expressions.
handle multiple 'formats' for data I/O. Restructure CommandDest and
DestReceiver stuff one more time (it's finally starting to look a bit
clean though). Code now matches latest 3.0 protocol document as far
as message formats go --- but there is no support for binary I/O yet.
DestReceiver pointers instead of just CommandDest values. The DestReceiver
is made at the point where the destination is selected, rather than
deep inside the executor. This cleans up the original kluge implementation
of tstoreReceiver.c, and makes it easy to support retrieving results
from utility statements inside portals. Thus, you can now do fun things
like Bind and Execute a FETCH or EXPLAIN command, and it'll all work
as expected (e.g., you can Describe the portal, or use Execute's count
parameter to suspend the output partway through). Implementation involves
stuffing the utility command's output into a Tuplestore, which would be
kind of annoying for huge output sets, but should be quite acceptable
for typical uses of utility commands.
the column by table OID and column number, if it's a simple column
reference. Along the way, get rid of reskey/reskeyop fields in Resdoms.
Turns out that representation was not convenient for either the planner
or the executor; we can make the planner deliver exactly what the
executor wants with no more effort.
initdb forced due to change in stored rule representation.
which does the same thing. Perhaps at one time there was a reason to
allow plan nodes to store their result types in different places, but
AFAICT that's been unnecessary for a good while.
Both plannable queries and utility commands are now always executed
within Portals, which have been revamped so that they can handle the
load (they used to be good only for single SELECT queries). Restructure
code to push command-completion-tag selection logic out of postgres.c,
so that it won't have to be duplicated between simple and extended queries.
initdb forced due to addition of a field to Query nodes.
that the types of untyped string-literal constants are deduced (ie,
when coerce_type is applied to 'em, that's what the type must be).
Remove the ancient hack of storing the input Param-types array as a
global variable, and put the info into ParseState instead. This touches
a lot of files because of adjustment of routine parameter lists, but
it's really not a large patch. Note: PREPARE statement still insists on
exact specification of parameter types, but that could easily be relaxed
now, if we wanted to do so.
I had inadvertently omitted it while rearranging things to support
length-counted incoming messages. Also, change the parser's API back
to accepting a 'char *' query string instead of 'StringInfo', as the
latter wasn't buying us anything except overhead. (I think when I put
it in I had some notion of making the parser API 8-bit-clean, but
seeing that flex depends on null-terminated input, that's not really
ever gonna happen.)
rewritten and the protocol is changed, but most elog calls are still
elog calls. Also, we need to contemplate mechanisms for controlling
all this functionality --- eg, how much stuff should appear in the
postmaster log? And what API should libpq expose for it?
expressions, ARRAY(sub-SELECT) expressions, some array functions.
Polymorphic functions using ANYARRAY/ANYELEMENT argument and return
types. Some regression tests in place, documentation is lacking.
Joe Conway, with some kibitzing from Tom Lane.
(materialization into a tuple store) discussed on pgsql-hackers earlier.
I've updated the documentation and the regression tests.
Notes on the implementation:
- I needed to change the tuple store API slightly -- it assumes that it
won't be used to hold data across transaction boundaries, so the temp
files that it uses for on-disk storage are automatically reclaimed at
end-of-transaction. I added a flag to tuplestore_begin_heap() to control
this behavior. Is changing the tuple store API in this fashion OK?
- in order to store executor results in a tuple store, I added a new
CommandDest. This works well for the most part, with one exception: the
current DestFunction API doesn't provide enough information to allow the
Executor to store results into an arbitrary tuple store (where the
particular tuple store to use is chosen by the call site of
ExecutorRun). To workaround this, I've temporarily hacked up a solution
that works, but is not ideal: since the receiveTuple DestFunction is
passed the portal name, we can use that to lookup the Portal data
structure for the cursor and then use that to get at the tuple store the
Portal is using. This unnecessarily ties the Portal code with the
tupleReceiver code, but it works...
The proper fix for this is probably to change the DestFunction API --
Tom suggested passing the full QueryDesc to the receiveTuple function.
In that case, callers of ExecutorRun could "subclass" QueryDesc to add
any additional fields that their particular CommandDest needed to get
access to. This approach would work, but I'd like to think about it for
a little bit longer before deciding which route to go. In the mean time,
the code works fine, so I don't think a fix is urgent.
- (semi-related) I added a NO SCROLL keyword to DECLARE CURSOR, and
adjusted the behavior of SCROLL in accordance with the discussion on
-hackers.
- (unrelated) Cleaned up some SGML markup in sql.sgml, copy.sgml
Neil Conway
utility statement (DeclareCursorStmt) with a SELECT query dangling from
it, rather than a SELECT query with a few unusual fields in it. Add
code to determine whether a planned query can safely be run backwards.
If DECLARE CURSOR specifies SCROLL, ensure that the plan can be run
backwards by adding a Materialize plan node if it can't. Without SCROLL,
you get an error if you try to fetch backwards from a cursor that can't
handle it. (There is still some discussion about what the exact
behavior should be, but this is necessary infrastructure in any case.)
Along the way, make EXPLAIN DECLARE CURSOR work.
entire contents of the subplan into the tuplestore before we can return
any tuples. Instead, the tuplestore holds what we've already read, and
we fetch additional rows from the subplan as needed. Random access to
the previously-read rows works with the tuplestore, and doesn't affect
the state of the partially-read subplan. This is a step towards fixing
the problems with cursors over complex queries --- we don't want to
stick in Materialize nodes if they'll prevent quick startup for a cursor.
rid of the assumption that sizeof(Oid)==sizeof(int). This is one small
step towards someday supporting 8-byte OIDs. For the moment, it doesn't
do much except get rid of a lot of unsightly casts.
locParam lists can be converted to bitmapsets to speed updating. Also,
replace 'locParam' with 'allParam', which contains all the paramIDs
relevant to the node (i.e., the union of extParam and locParam); this
saves a step during SetChangedParamList() without costing anything
elsewhere.
startup, not in the parser; this allows ALTER DOMAIN to work correctly
with domain constraint operations stored in rules. Rod Taylor;
code review by Tom Lane.
nodes where it's not really necessary. In many cases where the scan node
is not the topmost plan node (eg, joins, aggregation), it's possible to
just return the table tuple directly instead of generating an intermediate
projection tuple. In preliminary testing, this reduced the CPU time
needed for 'SELECT COUNT(*) FROM foo' by about 10%.
Try to model the effect of rescanning input tuples in mergejoins;
account for JOIN_IN short-circuiting where appropriate. Also, recognize
that mergejoin and hashjoin clauses may now be more than single operator
calls, so we have to charge appropriate execution costs.
that's selecting into a RECORD variable returns zero rows, make it
assign an all-nulls row to the RECORD; this is consistent with what
happens when the SELECT INTO target is not a RECORD. In support of
this, tweak the SPI code so that a valid tuple descriptor is returned
even when a SPI select returns no rows.
There are two implementation techniques: the executor understands a new
JOIN_IN jointype, which emits at most one matching row per left-hand row,
or the result of the IN's sub-select can be fed through a DISTINCT filter
and then joined as an ordinary relation.
Along the way, some minor code cleanup in the optimizer; notably, break
out most of the jointree-rearrangement preprocessing in planner.c and
put it in a new file prep/prepjointree.c.
