These are only supported in to_char, not in the other direction, but the
documentation failed to mention that. Also, describe TZ/tz as printing the
time zone "abbreviation", not "name", because what they print is elsewhere
referred to that way. Per bug #14558.
Also add to the existing rather half-baked description of PROFILE,
which does exactly the same thing, but I think people use it differently.
Discussion: https://postgr.es/m/16461.1487361849@sss.pgh.pa.us
This causes a warning with the old html-docs toolchain, though not with the
new. I had originally supposed that we needed both <indexterm> entries to
get both a primary index entry and a see-also link; but evidently not,
as pointed out by Fabien Coelho.
Discussion: https://postgr.es/m/alpine.DEB.2.20.1702161616060.5445@lancre
Make the typedefs for output plugins consistent with project style;
they were previously not even consistent with each other as to layout
or inclusion of parameter names. Make the documentation look the same,
and fix errors therein (missing and misdescribed parameters).
Back-patch because of the documentation bugs.
The CREATE INDEX CONCURRENTLY bug can only be triggered by row updates,
not inserts, since the problem would arise from an update incorrectly
being made HOT. Noted by Alvaro.
That was written when we still had "crypt" authentication, and it was
referring to the fact that an older client might support "crypt"
authentication but not "md5". But we haven't supported "crypt" for years.
(As soon as we add a new authentication mechanism that doesn't work with
MD5 hashes, we'll need a similar notice again. But this text as it's worded
now is just wrong.)
Backpatch to all supported versions.
Discussion: https://www.postgresql.org/message-id/9a7263eb-0980-2072-4424-440bb2513dc7@iki.fi
In addition to space accounted for by tuple_len, dead_tuple_len and
free_space, the table_len includes page overhead, the item pointers
table and padding bytes.
Backpatch to live branches.
We had an index entry for "median" attached to the percentile_cont function
entry, which was pretty useless because a person following the link would
never realize that that function was the one they were being hinted to use.
Instead, make the index entry point at the example in syntax-aggregates,
and add a <seealso> link to "percentile".
Also, since that example explicitly claims to be calculating the median,
make it use percentile_cont not percentile_disc. This makes no difference
in terms of the larger goals of that section, but so far as I can find,
nearly everyone thinks that "median" means the continuous not discrete
calculation.
Per gripe from Steven Winfield. Back-patch to 9.4 where we introduced
percentile_cont.
Discussion: https://postgr.es/m/20161223102056.25614.1166@wrigleys.postgresql.org
The ALTER TABLE documentation wasn't terribly clear when it came to
which commands could be combined together and what it meant when they
were.
In particular, SET TABLESPACE *can* be combined with other commands,
when it's operating against a single table, but not when multiple tables
are being moved with ALL IN TABLESPACE. Further, the actions are
applied together but not really in 'parallel', at least today.
Pointed out by: Amit Langote
Improved wording from Tom.
Back-patch to 9.4, where the ALL IN TABLESPACE option was added.
Discussion: https://www.postgresql.org/message-id/14c535b4-13ef-0590-1b98-76af355a0763%40lab.ntt.co.jp
When there is both a serialization failure and a unique violation,
throw the former rather than the latter. When initially pushed,
this was viewed as a feature to assist application framework
developers, so that they could more accurately determine when to
retry a failed transaction, but a test case presented by Ian
Jackson has shown that this patch can prevent serialization
anomalies in some cases where a unique violation is caught within a
subtransaction, the work of that subtransaction is discarded, and
no error is thrown. That makes this a bug fix, so it is being
back-patched to all supported branches where it is not already
present (i.e., 9.2 to 9.5).
Discussion: https://postgr.es/m/1481307991-16971-1-git-send-email-ian.jackson@eu.citrix.com
Discussion: https://postgr.es/m/22607.56276.807567.924144@mariner.uk.xensource.com
If the PAGER environment variable is set but contains an empty string,
psql would pass it to "sh" which would silently exit, causing whatever
query output we were printing to vanish entirely. This is quite
mystifying; it took a long time for us to figure out that this was the
cause of Joseph Brenner's trouble report. Rather than allowing that
to happen, we should treat this as another way to specify "no pager".
(We could alternatively treat it as selecting the default pager, but
it seems more likely that the former is what the user meant to achieve
by setting PAGER this way.)
Nonempty, but all-white-space, PAGER values have the same behavior, and
it's pretty easy to test for that, so let's handle that case the same way.
Most other cases of faulty PAGER values will result in the shell printing
some kind of complaint to stderr, which should be enough to diagnose the
problem, so we don't need to work harder than this. (Note that there's
been an intentional decision not to be very chatty about apparent failure
returns from the pager process, since that may happen if, eg, the user
quits the pager with control-C or some such. I'd just as soon not start
splitting hairs about which exit codes might merit making our own report.)
libpq's old PQprint() function was already on board with ignoring empty
PAGER values, but for consistency, make it ignore all-white-space values
as well.
It's been like this a long time, so back-patch to all supported branches.
Discussion: https://postgr.es/m/CAFfgvXWLOE2novHzYjmQK8-J6TmHz42G8f3X0SORM44+stUGmw@mail.gmail.com
Per bug #14441 from Mark Pether, the documentation could be misread,
mainly because some of the examples failed to show what happens with
a multicharacter "characters to trim" string. Also, while the text
description in most of these entries was fairly clear that the
"characters" argument is a set of characters not a substring to match,
some of them used variant wording that was a bit less clear.
trim() itself suffered from both deficiencies and was thus pretty
misinterpretable.
Also fix failure to explain which of LEADING/TRAILING/BOTH is the
default.
Discussion: https://postgr.es/m/20161130011710.6539.53657@wrigleys.postgresql.org
The documentation around the -b/--blobs option to pg_dump seemed to
imply that it might be possible to add blobs to a "schema-only" dump or
similar. Clarify that blobs are data and therefore will only be
included in dumps where data is being included, even when -b is used to
request blobs be included.
The -b option has been around since before 9.2, so back-patch to all
supported branches.
Discussion: https://postgr.es/m/20161119173316.GA13284@tamriel.snowman.net
Create a section specifically for the syntactic rules around whole-row
variable usage, such as expansion of "foo.*". This was previously
documented only haphazardly, with some critical info buried in
unexpected places like xfunc-sql-composite-functions. Per repeated
questions in different mailing lists.
Discussion: <16288.1479610770@sss.pgh.pa.us>
There are assorted references to RETURNING in Part II, but nothing
that would qualify as an explanation of the feature, which seems
like an oversight considering how useful it is. Add something.
Noted while looking for a place to point a cross-reference to ...
Commit 3c4cf08087 should have removed SET TABLESPACE from the synopsis
of ALTER MATERIALIZE VIEW as a possible "action" when it added a
separate line for it in the main command listing, but failed to.
Repair.
Backpatch to 9.4, like the aforementioned commit.
For a very long time, pltcl's spi_exec and spi_execp commands have had
a behavior of storing the current row number as an element of output
arrays, but this was never documented. Fix that.
For an equally long time, pltcl_trigger_handler had a behavior of silently
ignoring ".tupno" as an output column name, evidently so that the result
of spi_exec could be used directly as a trigger result tuple. Not sure
how useful that really is, but in any case it's bad that it would break
attempts to use ".tupno" as an actual column name. We can fix it by not
checking for ".tupno" until after we check for a column name match. This
comports with the effective behavior of spi_exec[p] that ".tupno" is only
magic when you don't have an actual column named that.
In passing, wordsmith the description of returning modified tuples from
a pltcl trigger.
Noted while working on Jim Nasby's patch to support composite results
from pltcl. The inability to return trigger tuples using ".tupno" as
a column name is a bug, so back-patch to all supported branches.
Show how to get the system's huge page size, rather than misleadingly
referring to PAGE_SIZE (which is usually understood to be the regular
page size). Show how to confirm whether huge pages have been allocated.
Minor wordsmithing. Back-patch to 9.4 where this section appeared.
Replace "Full path to ..." with "Full path name of ...". At least one
user has misinterpreted the existing wording as meaning "Directory
containing ...".
It was perhaps not entirely clear that internal self-references shouldn't
be schema-qualified even if the view name is written with a schema.
Spell it out.
Discussion: <871sznz69m.fsf@metapensiero.it>
Evidently an oversight in commit 729205571. Back-patch to 9.2 where
privileges for types were introduced.
Report: <20160922173517.8214.88959@wrigleys.postgresql.org>
These worked as-is until around 7.0, but fail in newer versions because
there are more operators named "#". Besides it's a bit inconsistent that
only two of the examples on this page lack type names on their constants.
Report: <20160923081530.1517.75670@wrigleys.postgresql.org>
Mostly, explain how row xmin's used to be replaced by FrozenTransactionId
and no longer are. Do a little copy-editing on the side.
Per discussion with Egor Rogov. Back-patch to 9.4 where the behavioral
change occurred.
Discussion: <575D7955.6060209@postgrespro.ru>
Previously, we threw an error if a dynamic timezone abbreviation did not
match any abbreviation recorded in the referenced IANA time zone entry.
That seemed like a good consistency check at the time, but it turns out
that a number of the abbreviations in the IANA database are things that
Olson and crew made up out of whole cloth. Their current policy is to
remove such names in favor of using simple numeric offsets. Perhaps
unsurprisingly, a lot of these made-up abbreviations have varied in meaning
over time, which meant that our commit b2cbced9e and later changes made
them into dynamic abbreviations. So with newer IANA database versions
that don't mention these abbreviations at all, we fail, as reported in bug
#14307 from Neil Anderson. It's worse than just a few unused-in-the-wild
abbreviations not working, because the pg_timezone_abbrevs view stops
working altogether (since its underlying function tries to compute the
whole view result in one call).
We considered deleting these abbreviations from our abbreviations list, but
the problem with that is that we can't stay ahead of possible future IANA
changes. Instead, let's leave the abbreviations list alone, and treat any
"orphaned" dynamic abbreviation as just meaning the referenced time zone.
It will behave a bit differently than it used to, in that you can't any
longer override the zone's standard vs. daylight rule by using the "wrong"
abbreviation of a pair, but that's better than failing entirely. (Also,
this solution can be interpreted as adding a small new feature, which is
that any abbreviation a user wants can be defined as referencing a time
zone name.)
Back-patch to all supported branches, since this problem affects all
of them when using tzdata 2016f or newer.
Report: <20160902031551.15674.67337@wrigleys.postgresql.org>
Discussion: <6189.1472820913@sss.pgh.pa.us>
The decision to reuse values of parameters from a previous connection
has been based on whether the new target is a conninfo string. Add this
means of overriding that default. This feature arose as one component
of a fix for security vulnerabilities in pg_dump, pg_dumpall, and
pg_upgrade, so back-patch to 9.1 (all supported versions). In 9.3 and
later, comment paragraphs that required update had already-incorrect
claims about behavior when no connection is open; fix those problems.
Security: CVE-2016-5424
If ANALYZE found no repeated non-null entries in its sample, it set the
column's stadistinct value to -1.0, intending to indicate that the entries
are all distinct. But what this value actually means is that the number
of distinct values is 100% of the table's rowcount, and thus it was
overestimating the number of distinct values by however many nulls there
are. This could lead to very poor selectivity estimates, as for example
in a recent report from Andreas Joseph Krogh. We should discount the
stadistinct value by whatever we've estimated the nulls fraction to be.
(That is what will happen if we choose to use a negative stadistinct for
a column that does have repeated entries, so this code path was just
inconsistent.)
In addition to fixing the stadistinct entries stored by several different
ANALYZE code paths, adjust the logic where get_variable_numdistinct()
forces an "all distinct" estimate on the basis of finding a relevant unique
index. Unique indexes don't reject nulls, so there's no reason to assume
that the null fraction doesn't apply.
Back-patch to all supported branches. Back-patching is a bit of a judgment
call, but this problem seems to affect only a few users (else we'd have
identified it long ago), and it's bad enough when it does happen that
destabilizing plan choices in a worse direction seems unlikely.
Patch by me, with documentation wording suggested by Dean Rasheed
Report: <VisenaEmail.26.df42f82acae38a58.156463942b8@tc7-visena>
Discussion: <16143.1470350371@sss.pgh.pa.us>
The help message for pg_basebackup specifies that the numbers 0 through 9
are accepted as valid values of -Z option. But, previously -Z 0 was rejected
as an invalid compression level.
Per discussion, it's better to make pg_basebackup treat 0 as valid
compression level meaning no compression, like pg_dump.
Back-patch to all supported versions.
Reported-By: Jeff Janes
Reviewed-By: Amit Kapila
Discussion: CAMkU=1x+GwjSayc57v6w87ij6iRGFWt=hVfM0B64b1_bPVKRqg@mail.gmail.com
This text was added by commit ff213239c, and not long thereafter obsoleted
by commit 4adc2f72a (which made the test depend on NBuffers instead); but
nobody noticed the need for an update. Commit 9563d5b5e adds some further
dependency on maintenance_work_mem, but the existing verbiage seems to
cover that with about as much precision as we really want here. Let's
just take it all out rather than leaving ourselves open to more errors of
omission in future. (That solution makes this change back-patchable, too.)
Noted by Peter Geoghegan.
Discussion: <CAM3SWZRVANbj9GA9j40fAwheQCZQtSwqTN1GBTVwRrRbmSf7cg@mail.gmail.com>
The docs failed to explain that LIKE INCLUDING INDEXES would not preserve
the names of indexes and associated constraints. Also, it wasn't mentioned
that EXCLUDE constraints would be copied by this option. The latter
oversight seems enough of a documentation bug to justify back-patching.
In passing, do some minor copy-editing in the same area, and add an entry
for LIKE under "Compatibility", since it's not exactly a faithful
implementation of the standard's feature.
Discussion: <20160728151154.AABE64016B@smtp.hushmail.com>
The description of udt_privileges view contained an incorrect copy-pasted word.
Back-patch to 9.2 where udt_privileges view was added.
Author: Alexander Law
The SQL standard appears to specify that IS [NOT] NULL's tests of field
nullness are non-recursive, ie, we shouldn't consider that a composite
field with value ROW(NULL,NULL) is null for this purpose.
ExecEvalNullTest got this right, but eval_const_expressions did not,
leading to weird inconsistencies depending on whether the expression
was such that the planner could apply constant folding.
Also, adjust the docs to mention that IS [NOT] DISTINCT FROM NULL can be
used as a substitute test if a simple null check is wanted for a rowtype
argument. That motivated reordering things so that IS [NOT] DISTINCT FROM
is described before IS [NOT] NULL. In HEAD, I went a bit further and added
a table showing all the comparison-related predicates.
Per bug #14235. Back-patch to all supported branches, since it's certainly
undesirable that constant-folding should change the semantics.
Report and patch by Andrew Gierth; assorted wordsmithing and revised
regression test cases by me.
Report: <20160708024746.1410.57282@wrigleys.postgresql.org>
9.4 added a second description of GET DIAGNOSTICS that was totally
independent of the existing one, resulting in each description lying to the
extent that it claimed the set of status items it described was complete.
Fix that, and do some minor markup improvement.
Also some other small fixes per bug #14258 from Dilian Palauzov.
Discussion: <20160718181437.1414.40802@wrigleys.postgresql.org>
Document that index storage is dependent on the operating system's
collation library ordering, and any change in that ordering can create
invalid indexes.
Discussion: 20160617154311.GB19359@momjian.us
Backpatch-through: 9.1
If there's anyplace in our SGML docs that explains this behavior, I can't
find it right at the moment. Add an explanation in "Dependency Tracking"
which seems like the authoritative place for such a discussion. Per
gripe from Michelle Schwan.
While at it, update this section's example of a dependency-related
error message: they last looked like that in 8.3. And remove the
explanation of dependency updates from pre-7.3 installations, which
is probably no longer worth anybody's brain cells to read.
The bogus error message example seems like an actual documentation bug,
so back-patch to all supported branches.
Discussion: <20160620160047.5792.49827@wrigleys.postgresql.org>
Dilian Palauzov pointed out in bug #14201 that the docs failed to mention
the possibility of %R producing '(' due to an unmatched parenthesis.
He proposed just adding that in the same style as the other options were
listed; but it seemed to me that the sentence was already nearly
unintelligible, so I rewrote it a bit more extensively.
Report: <20160619121113.5789.68274@wrigleys.postgresql.org>
Document these as "nearest integer >= argument" and "nearest integer <=
argument", which will hopefully be less confusing than the old formulation.
New wording is from Matlab via Dean Rasheed.
I changed the pg_description entries as well as the SGML docs. In the
back branches, this will only affect installations initdb'd in the future,
but it should be harmless otherwise.
Discussion: <CAEZATCW3yzJo-NMSiQs5jXNFbTsCEftZS-Og8=FvFdiU+kYuSA@mail.gmail.com>
The server hasn't paid attention to the TZ environment variable since
commit ca4af308c3, but that commit missed removing this documentation
reference, as did commit d883b916a9 which added the reference where
it now belongs (initdb).
Back-patch to 9.2 where the behavior changed. Also back-patch
d883b916a9 as needed.
Matthew Somerville
Previously recovery_min_apply_delay was applied even before recovery
had reached consistency. This could cause us to wait a long time
unexpectedly for read-only connections to be allowed. It's problematic
because the standby was useless during that wait time.
This patch changes recovery_min_apply_delay so that it's applied once
the database has reached the consistent state. That is, even if the delay
is set, the standby tries to replay WAL records as fast as possible until
it has reached consistency.
Author: Michael Paquier
Reviewed-By: Julien Rouhaud
Reported-By: Greg Clough
Backpatch: 9.4, where recovery_min_apply_delay was added
Bug: #13770
Discussion: http://www.postgresql.org/message-id/20151111155006.2644.84564@wrigleys.postgresql.org
Dead or half-dead index leaf pages were incorrectly reported as live, as a
consequence of a code rearrangement I made (during a moment of severe brain
fade, evidently) in commit d287818eb5.
The index metapage was not counted in index_size, causing that result to
not agree with the actual index size on-disk.
Index root pages were not counted in internal_pages, which is inconsistent
compared to the case of a root that's also a leaf (one-page index), where
the root would be counted in leaf_pages. Aside from that inconsistency,
this could lead to additional transient discrepancies between the reported
page counts and index_size, since it's possible for pgstatindex's scan to
see zero or multiple pages marked as BTP_ROOT, if the root moves due to
a split during the scan. With these fixes, index_size will always be
exactly one page more than the sum of the displayed page counts.
Also, the index_size result was incorrectly documented as being measured in
pages; it's always been measured in bytes. (While fixing that, I couldn't
resist doing some small additional wordsmithing on the pgstattuple docs.)
Including the metapage causes the reported index_size to not be zero for
an empty index. To preserve the desired property that the pgstattuple
regression test results are platform-independent (ie, BLCKSZ configuration
independent), scale the index_size result in the regression tests.
The documentation issue was reported by Otsuka Kenji, and the inconsistent
root page counting by Peter Geoghegan; the other problems noted by me.
Back-patch to all supported branches, because this has been broken for
a long time.
Clarify the description of which transactions will block a CREATE INDEX
CONCURRENTLY command from proceeding, and mention that the index might
still not be usable after CREATE INDEX completes. (This happens if the
index build detected broken HOT chains, so that pg_index.indcheckxmin gets
set, and there are open old transactions preventing the xmin horizon from
advancing past the index's initial creation. I didn't want to explain what
broken HOT chains are, though, so I omitted an explanation of exactly when
old transactions prevent the index from being used.)
Per discussion with Chris Travers. Back-patch to all supported branches,
since the same text appears in all of them.
In runtime.sgml, the old formulas for calculating the reasonable
values of SEMMNI and SEMMNS were incorrect. They have forgotten to
count the number of semaphores which both the checkpointer process
(introduced in 9.2) and the background worker processes (introduced
in 9.3) need.
This commit fixes those formulas so that they count the number of
semaphores which the checkpointer process and the background worker
processes need.
Report and patch by Kyotaro Horiguchi. Only the patch for 9.3 was
modified by me. Back-patch to 9.2 where the checkpointer process was
added and the number of needed semaphores was increased.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Backpatch: 9.2
Discussion: http://www.postgresql.org/message-id/20160203.125119.66820697.horiguchi.kyotaro@lab.ntt.co.jp
Many automated test suites call pg_ctl. Buildfarm members axolotl,
hornet, mandrill, shearwater, sungazer and tern have failed when server
shutdown took longer than the pg_ctl default 60s timeout. This addition
permits slow hosts to easily raise the timeout without us editing a
--timeout argument into every test suite pg_ctl call. Back-patch to 9.1
(all supported versions) for the sake of automated testing.
Reviewed by Tom Lane.
Get rid of the false implication that PRIMARY KEY is exactly equivalent to
UNIQUE + NOT NULL. That was more-or-less true at one time in our
implementation, but the standard doesn't say that, and we've grown various
features (many of them required by spec) that treat a pkey differently from
less-formal constraints. Per recent discussion on pgsql-general.
I failed to resist the temptation to do some other wordsmithing in the
same area.
As pointed out by Michael Paquier, recovery_min_apply_delay didn't exist
in 9.0-9.3, making the release note text not very useful. Instead make it
talk about recovery_target_xid, which did exist then.
9.0 is already out of support, but we can fix the text in the newer
branches' copies of its release notes.
Common mathematical convention is that exponentiation associates right to
left. We aren't going to change the parser for this, but we could note
it in the operator's description. (It's already noted in the operator
precedence/associativity table, but users might not look there.)
Per bug #13829 from Henrik Pauli.
Tone down an overly strong statement about which pseudo-types PLs are
likely to allow. Add "event_trigger" to the list, as well as
"pg_ddl_command" in 9.5/HEAD. Back-patch to 9.3 where event_trigger
was added.
This has worked that way for a long time, maybe always, but you would
not have known it from the documentation. Also back-patch the notes
I added to HEAD earlier today about behavior of the "-f -" switch,
which likewise have been valid for many releases.
In commit 1ea0c73c2 I added a section to user-manag.sgml about how to drop
roles that own objects; but as pointed out by Stephen Frost, I neglected
that shared objects (databases or tablespaces) may need special treatment.
Fix that. Back-patch to supported versions, like the previous patch.
The POSIX standard for tar headers requires archive member sizes to be
printed in octal with at most 11 digits, limiting the representable file
size to 8GB. However, GNU tar and apparently most other modern tars
support a convention in which oversized values can be stored in base-256,
allowing any practical file to be a tar member. Adopt this convention
to remove two limitations:
* pg_dump with -Ft output format failed if the contents of any one table
exceeded 8GB.
* pg_basebackup failed if the data directory contained any file exceeding
8GB. (This would be a fatal problem for installations configured with a
table segment size of 8GB or more, and it has also been seen to fail when
large core dump files exist in the data directory.)
File sizes under 8GB are still printed in octal, so that no compatibility
issues are created except in cases that would have failed entirely before.
In addition, this patch fixes several bugs in the same area:
* In 9.3 and later, we'd defined tarCreateHeader's file-size argument as
size_t, which meant that on 32-bit machines it would write a corrupt tar
header for file sizes between 4GB and 8GB, even though no error was raised.
This broke both "pg_dump -Ft" and pg_basebackup for such cases.
* pg_restore from a tar archive would fail on tables of size between 4GB
and 8GB, on machines where either "size_t" or "unsigned long" is 32 bits.
This happened even with an archive file not affected by the previous bug.
* pg_basebackup would fail if there were files of size between 4GB and 8GB,
even on 64-bit machines.
* In 9.3 and later, "pg_basebackup -Ft" failed entirely, for any file size,
on 64-bit big-endian machines.
In view of these potential data-loss bugs, back-patch to all supported
branches, even though removal of the documented 8GB limit might otherwise
be considered a new feature rather than a bug fix.
This back-ports commit 13d856e177 and assorted followon patches
into 9.4 and 9.5. 9.5 and HEAD are now substantially identical in all
the files touched by this commit, except that 010_pg_basebackup.pl has
a few more tests related to the new --slot option. 9.4 has many fewer
TAP tests, but the test infrastructure files are substantially the same,
with the exception that 9.4 lacks the single-tmp-install infrastructure
introduced in 9.5 (commit dcae5facca).
The primary motivation for this patch is to ensure that TAP test case
fixes can be back-patched without hazards of the kind seen in commits
34557f544/06dd4b44f. In principle it should also make the world safe
for running the TAP tests in the buildfarm in these branches; although
we might want to think about back-porting dcae5facca to 9.4 if
we're going to do that for real, because the TAP tests are quite disk
space hungry without it.
Michael Paquier did the back-porting work; original patches were by
him and assorted other people.
Commit 8457d0beca introduced an example which, while not incorrect,
failed to exhibit the behavior it meant to describe, as a result of omitting
an E'' prefix that needed to be there. Noticed and fixed by Peter Geoghegan.
I (tgl) failed to resist the temptation to wordsmith nearby text a bit
while at it.
In commit a5ec86a7c7 I wrote a quick hack
that reduced the number of TeX string pool entries created while converting
our documentation to PDF form. That held the fort for awhile, but as of
HEAD we're back up against the same limitation. It turns out that the
original coding of \FlowObjectSetup actually results in *three* string pool
entries being generated for every "flow object" (that is, potential
cross-reference target) in the documentation, and my previous hack only got
rid of one of them. With a little more care, we can reduce the string
count to one per flow object plus one per actually-cross-referenced flow
object (about 115000 + 5000 as of current HEAD); that should work until
the documentation volume roughly doubles from where it is today.
As a not-incidental side benefit, this change also causes pdfjadetex to
stop emitting unreferenced hyperlink anchors (bookmarks) into the PDF file.
It had been making one willy-nilly for every flow object; now it's just one
per actually-cross-referenced object. This results in close to a 2X
savings in PDF file size. We will still want to run the output through
"jpdftweak" to get it to be compressed; but we no longer need removal of
unreferenced bookmarks, so we might be able to find a quicker tool for
that step.
Although the failure only affects HEAD and US-format output at the moment,
9.5 cannot be more than a few pages short of failing likewise, so it
will inevitably fail after a few rounds of minor-version release notes.
I don't have a lot of faith that we'll never hit the limit in the older
branches; and anyway it would be nice to get rid of jpdftweak across the
board. Therefore, back-patch to all supported branches.
Show how this can be used in practice to make queries simpler and more
flexible. Also, draw an explicit contrast to the existence operator,
which doesn't work that way.
Peter Geoghegan and Tom Lane
In general one may have to run both REASSIGN OWNED and DROP OWNED to get
rid of all the dependencies of a role to be dropped. This was alluded to
in the REASSIGN OWNED man page, but not really spelled out in full; and in
any case the procedure ought to be documented in a more prominent place
than that. Add a section to the "Database Roles" chapter explaining this,
and do a bit of wordsmithing in the relevant commands' man pages.
Failure to perform garbage collection now has a user-visible effect, so
explain that and explain that reducing pgss_max is the way to prevent it.
Per gripe from Andrew Dunstan.
The documentation for the autovacuum_multixact_freeze_max_age and
autovacuum_freeze_max_age relation level parameters contained:
"Note that while you can set autovacuum_multixact_freeze_max_age very
small, or even zero, this is usually unwise since it will force frequent
vacuuming."
which hasn't been true since these options were made relation options,
instead of residing in the pg_autovacuum table (834a6da4f7).
Remove the outdated sentence. Even the lowered limits from 2596d70 are
high enough that this doesn't warrant calling out the risk in the CREATE
TABLE docs.
Per discussion with Tom Lane and Alvaro Herrera
Discussion: 26377.1443105453@sss.pgh.pa.us
Backpatch: 9.0- (in parts)
It's not terribly hard to devise regular expressions that take large
amounts of time and/or memory to process. Recent testing by Greg Stark has
also shown that machines with small stack limits can be driven to stack
overflow by suitably crafted regexps. While we intend to fix these things
as much as possible, it's probably impossible to eliminate slow-execution
cases altogether. In any case we don't want to treat such things as
security issues. The history of that code should already discourage
prudent DBAs from allowing execution of regexp patterns coming from
possibly-hostile sources, but it seems like a good idea to warn about the
hazard explicitly.
Currently, similar_escape() allows access to enough of the underlying
regexp behavior that the warning has to apply to SIMILAR TO as well.
We might be able to make it safer if we tightened things up to allow only
SQL-mandated capabilities in SIMILAR TO; but that would be a subtly
non-backwards-compatible change, so it requires discussion and probably
could not be back-patched.
Per discussion among pgsql-security list.
Previously it was documented that the details on HeapTupleHeaderData
struct could be found in htup.h. This is not correct because it's now
defined in htup_details.h.
Back-patch to 9.3 where the definition of HeapTupleHeaderData struct
was moved from htup.h to htup_details.h.
Michael Paquier
The docs claimed that \uhhhh would be interpreted as a Unicode value
regardless of the database encoding, but it's never been implemented
that way: \uhhhh and \xhhhh actually mean exactly the same thing, namely
the character that pg_mb2wchar translates to 0xhhhh. Moreover we were
falsely dismissive of the usefulness of Unicode code points above FFFF.
Fix that.
It's been like this for ages, so back-patch to all supported branches.
The setting values of some parameters including max_worker_processes
must be equal to or higher than the values on the master. However,
previously max_worker_processes was not listed as such parameter
in the document. So this commit adds it to that list.
Back-patch to 9.4 where max_worker_processes was added.
The default argument, if given, has to be of exactly the same datatype
as the first argument; but this was not stated in so many words, and
the error message you get about it might not lead your thought in the
right direction. Per bug #13587 from Robert McGehee.
A quick scan says that these are the only two built-in functions with two
anyelement arguments and no other polymorphic arguments. There are plenty
of cases of, eg, anyarray and anyelement, but those seem less likely to
confuse. For instance this doesn't seem terribly hard to figure out:
"function array_remove(integer[], numeric) does not exist". So I've
contented myself with fixing these two cases.
This behavior wasn't documented, but it should be because it's user-visible
in triggers and other functions executed on the remote server.
Per question from Adam Fuchs.
Back-patch to 9.3 where postgres_fdw was added.
The table-rewriting forms of ALTER TABLE are MVCC-unsafe, in much the same
way as TRUNCATE, because they replace all rows of the table with newly-made
rows with a new xmin. (Ideally, concurrent transactions with old snapshots
would continue to see the old table contents, but the data is not there
anymore --- and if it were there, it would be inconsistent with the table's
updated rowtype, so there would be serious implementation problems to fix.)
This was nowhere documented though, and the problem was only documented for
TRUNCATE in a note in the TRUNCATE reference page. Create a new "Caveats"
section in the MVCC chapter that can be home to this and other limitations
on serializable consistency.
In passing, fix a mistaken statement that VACUUM and CLUSTER would reclaim
space occupied by a dropped column. They don't reconstruct existing tuples
so they couldn't do that.
Back-patch to all supported branches.
Although initdb has long discouraged use of a filesystem mount-point
directory as a PG data directory, this point was covered nowhere in the
user-facing documentation. Also, with the popularity of pg_upgrade,
we really need to recommend that the PG user own not only the data
directory but its parent directory too. (Without a writable parent
directory, operations such as "mv data data.old" fail immediately.
pg_upgrade itself doesn't do that, but wrapper scripts for it often do.)
Hence, adjust the "Creating a Database Cluster" section to address
these points. I also took the liberty of wordsmithing the discussion
of NFS a bit.
These considerations aren't by any means new, so back-patch to all
supported branches.
While postgres' use of SSL renegotiation is a good idea in theory, it
turned out to not work well in practice. The specification and openssl's
implementation of it have lead to several security issues. Postgres' use
of renegotiation also had its share of bugs.
Additionally OpenSSL has a bunch of bugs around renegotiation, reported
and open for years, that regularly lead to connections breaking with
obscure error messages. We tried increasingly complex workarounds to get
around these bugs, but we didn't find anything complete.
Since these connection breakages often lead to hard to debug problems,
e.g. spuriously failing base backups and significant latency spikes when
synchronous replication is used, we have decided to change the default
setting for ssl renegotiation to 0 (disabled) in the released
backbranches and remove it entirely in 9.5 and master..
Author: Michael Paquier, with changes by me
Discussion: 20150624144148.GQ4797@alap3.anarazel.de
Backpatch: 9.0-9.4; 9.5 and master get a different patch
The documentation implied that there was seldom any reason to use the
array_append, array_prepend, and array_cat functions directly. But that's
not really true, because they can help make it clear which case is meant,
which the || operator can't do since it's overloaded to represent all three
cases. Add some discussion and examples illustrating the potentially
confusing behavior that can ensue if the parser misinterprets what was
meant.
Per a complaint from Michael Herold. Back-patch to 9.2, which is where ||
started to behave this way.
Tom fixed another one of these in commit 7f32dbcd, but there was another
almost identical one in libpq docs. Per his comment:
HP's web server has apparently become case-sensitive sometime recently.
Per bug #13479 from Daniel Abraham. Corrected link identified by Alvaro.
The .backup file name can be passed to pg_archivecleanup even if
it includes the extension which is specified in -x option.
However, previously the document incorrectly warned a user
not to do that.
Back-patch to 9.2 where pg_archivecleanup's -x option and
the warning were added.
This adjusts commit 82233ce7ea so that the
postmaster does not exit until all its child processes have exited, even
if the 5-second timeout elapses and we have to send SIGKILL. There is no
great value in having the postmaster process quit sooner, and doing so can
mislead onlookers into thinking that the cluster is fully terminated when
actually some child processes still survive.
This effect might explain recent test failures on buildfarm member hamster,
wherein we failed to restart a cluster just after shutting it down with
"pg_ctl stop -m immediate".
I also did a bit of code review/beautification, including fixing a faulty
use of the Max() macro on a volatile expression.
Back-patch to 9.4. In older branches, the postmaster never waited for
children to exit during immediate shutdowns, and changing that would be
too much of a behavioral change.
- Correct the name of directory which those catalog columns allow to be shrunk.
- Correct the name of symbol which is used as the value of pg_class.relminmxid
when the relation is not a table.
- Fix "ID ID" typo.
Backpatch to 9.3 where those cataog columns were introduced.
Also sneak entries for commits 97ff2a564 et al into the sections for
the previous releases in the relevant branches. Those fixes did go out
in the previous releases, but missed getting documented.
This has been the predominant outcome. When the output of decrypting
with a wrong key coincidentally resembled an OpenPGP packet header,
pgcrypto could instead report "Corrupt data", "Not text data" or
"Unsupported compression algorithm". The distinct "Corrupt data"
message added no value. The latter two error messages misled when the
decrypted payload also exhibited fundamental integrity problems. Worse,
error message variance in other systems has enabled cryptologic attacks;
see RFC 4880 section "14. Security Considerations". Whether these
pgcrypto behaviors are likewise exploitable is unknown.
In passing, document that pgcrypto does not resist side-channel attacks.
Back-patch to 9.0 (all supported versions).
Security: CVE-2015-3167
Analysis by Noah Misch shows that the 25% threshold set by commit
53bb309d2d is lower than any other,
similar autovac threshold. While we don't know exactly what value
will be optimal for all users, it is better to err a little on the
high side than on the low side. A higher value increases the risk
that users might exhaust the available space and start seeing errors
before autovacuum can clean things up sufficiently, but a user who
hits that problem can compensate for it by reducing
autovacuum_multixact_freeze_max_age to a value dependent on their
average multixact size. On the flip side, if the emergency cap
imposed by that patch kicks in too early, the user will experience
excessive wraparound scanning and will be unable to mitigate that
problem by configuration. The new value will hopefully reduce the
risk of such bad experiences while still providing enough headroom
to avoid multixact member exhaustion for most users.
Along the way, adjust the documentation to reflect the effects of
commit 04e6d3b877, which taught
autovacuum to run for multixact wraparound even when autovacuum
is configured off.
As discussed, the default setting of include_realm=0 can be dangerous in
multi-realm environments because it is then impossible to differentiate
users with the same username but who are from two different realms.
Recommend include_realm=1 and note that the default setting may change
in a future version of PostgreSQL and therefore users may wish to
explicitly set include_realm to avoid issues while upgrading.
The logic introduced in commit b69bf30b9b
and repaired in commits 669c7d20e6 and
7be47c56af helps to ensure that we don't
overwrite old multixact member information while it is still needed,
but a user who creates many large multixacts can still exhaust the
member space (and thus start getting errors) while autovacuum stands
idly by.
To fix this, progressively ramp down the effective value (but not the
actual contents) of autovacuum_multixact_freeze_max_age as member space
utilization increases. This makes autovacuum more aggressive and also
reduces the threshold for a manual VACUUM to perform a full-table scan.
This patch leaves unsolved the problem of ensuring that emergency
autovacuums are triggered even when autovacuum=off. We'll need to fix
that via a separate patch.
Thomas Munro and Robert Haas
psql was already accepting conninfo strings as the first parameter in
\connect, but the way it worked wasn't sane; some of the other
parameters would get the previous connection's values, causing it to
connect to a completely unexpected server or, more likely, not finding
any server at all because of completely wrong combinations of
parameters.
Fix by explicitely checking for a conninfo-looking parameter in the
dbname position; if one is found, use its complete specification rather
than mix with the other arguments. Also, change tab-completion to not
try to complete conninfo/URI-looking "dbnames" and document that
conninfos are accepted as first argument.
There was a weak consensus to backpatch this, because while the behavior
of using the dbname as a conninfo is nowhere documented for \connect, it
is reasonable to expect that it works because it does work in many other
contexts. Therefore this is backpatched all the way back to 9.0.
To implement this, routines previously private to libpq have been
duplicated so that psql can decide what looks like a conninfo/URI
string. In back branches, just duplicate the same code all the way back
to 9.2, where URIs where introduced; 9.0 and 9.1 have a simpler version.
In master, the routines are moved to src/common and renamed.
Author: David Fetter, Andrew Dunstan. Some editorialization by me
(probably earning a Gierth's "Sloppy" badge in the process.)
Reviewers: Andrew Gierth, Erik Rijkers, Pavel Stěhule, Stephen Frost,
Robert Haas, Andrew Dunstan.
You're required to write either RANGE or ROWS to start a frame clause,
but the documentation incorrectly implied this is optional. Noted by
David Johnston.
The SGML docs claimed that 1-byte integers could be sent or received with
the "isint" options, but no such behavior has ever been implemented in
pqGetInt() or pqPutInt(). The in-code documentation header for PQfn() was
even less in tune with reality, and the code itself used parameter names
matching neither the SGML docs nor its libpq-fe.h declaration. Do a bit
of additional wordsmithing on the SGML docs while at it.
Since the business about 1-byte integers is a clear documentation bug,
back-patch to all supported branches.
Since 9.1, we've provided extensions with a way to denote
"configuration" tables- tables created by an extension which the user
may modify. By marking these as "configuration" tables, the extension
is asking for the data in these tables to be pg_dump'd (tables which
are not marked in this way are assumed to be entirely handled during
CREATE EXTENSION and are not included at all in a pg_dump).
Unfortunately, pg_dump neglected to consider foreign key relationships
between extension configuration tables and therefore could end up
trying to reload the data in an order which would cause FK violations.
This patch teaches pg_dump about these dependencies, so that the data
dumped out is done so in the best order possible. Note that there's no
way to handle circular dependencies, but those have yet to be seen in
the wild.
The release notes for this should include a caution to users that
existing pg_dump-based backups may be invalid due to this issue. The
data is all there, but restoring from it will require extracting the
data for the configuration tables and then loading them in the correct
order by hand.
Discussed initially back in bug #6738, more recently brought up by
Gilles Darold, who provided an initial patch which was further reworked
by Michael Paquier. Further modifications and documentation updates
by me.
Back-patch to 9.1 where we added the concept of extension configuration
tables.
If libpq output buffer is full, pqSendSome() function tries to drain any
incoming data. This avoids deadlock, if the server e.g. sends a lot of
NOTICE messages, and blocks until we read them. However, pqSendSome() only
did that in blocking mode. In non-blocking mode, the deadlock could still
happen.
To fix, take a two-pronged approach:
1. Change the documentation to instruct that when PQflush() returns 1, you
should wait for both read- and write-ready, and call PQconsumeInput() if it
becomes read-ready. That fixes the deadlock, but applications are not going
to change overnight.
2. In pqSendSome(), drain the input buffer before returning 1. This
alleviates the problem for applications that only wait for write-ready. In
particular, a slow but steady stream of NOTICE messages during COPY FROM
STDIN will no longer cause a deadlock. The risk remains that the server
attempts to send a large burst of data and fills its output buffer, and at
the same time the client also sends enough data to fill its output buffer.
The application will deadlock if it goes to sleep, waiting for the socket
to become write-ready, before the server's data arrives. In practice,
NOTICE messages and such that the server might be sending are usually
short, so it's highly unlikely that the server would fill its output buffer
so quickly.
Backpatch to all supported versions.
In investigating yesterday's crash report from Hugo Osvaldo Barrera, I only
looked back as far as commit f3aec2c7f5 where the breakage occurred
(which is why I thought the IPv4-in-IPv6 business was undocumented). But
actually the logic dates back to commit 3c9bb8886d and was simply
broken by erroneous refactoring in the later commit. A bit of archives
excavation shows that we added the whole business in response to a report
that some 2003-era Linux kernels would report IPv4 connections as having
IPv4-in-IPv6 addresses. The fact that we've had no complaints since 9.0
seems to be sufficient confirmation that no modern kernels do that, so
let's just rip it all out rather than trying to fix it.
Do this in the back branches too, thus essentially deciding that our
effective behavior since 9.0 is correct. If there are any platforms on
which the kernel reports IPv4-in-IPv6 addresses as such, yesterday's fix
would have made for a subtle and potentially security-sensitive change in
the effective meaning of IPv4 pg_hba.conf entries, which does not seem like
a good thing to do in minor releases. So let's let the post-9.0 behavior
stand, and change the documentation to match it.
In passing, I failed to resist the temptation to wordsmith the description
of pg_hba.conf IPv4 and IPv6 address entries a bit. A lot of this text
hasn't been touched since we were IPv4-only.
When ecpg was rewritten to the new protocol version not all variable types
were corrected. This patch rewrites the code for these types to fix that. It
also fixes the documentation to correctly tell the status of array handling.
When beginning streaming replication, the client usually issues the
IDENTIFY_SYSTEM command, which used to return the current WAL insert
position. That's not suitable for the intended purpose of that field,
however. pg_receivexlog uses it to start replication from the reported
point, but if it hasn't been flushed to disk yet, it will fail. Change
IDENTIFY_SYSTEM to report the flush position instead.
Backpatch to 9.1 and above. 9.0 doesn't report any WAL position.
The previous wording claimed that the file was always in /etc, but of
course this varies with the installation layout. Write instead that it
can be found via `pg_config --sysconfdir`. Even though this is still
somewhat incorrect because it doesn't account of moved installations, it
at least conveys that the location depends on the installation.
"ECHO all" is ignored for interactive input, and has been for a very long
time, though possibly not for as long as the documentation has claimed the
opposite. Fix that, and also note that empty lines aren't echoed, which
while dubious is another longstanding behavior (it's embedded in our
regression test files for one thing). Per bug #12721 from Hans Ginzel.
In HEAD, also improve the code comments in this area, and suppress an
unnecessary fflush(stdout) when we're not echoing. That would likely
be safe to back-patch, but I'll not risk it mere hours before a release
wrap.
We've been trying to support \u0000 in JSON values since commit
78ed8e03c6, and have introduced increasingly worse hacks to try to
make it work, such as commit 0ad1a81632. However, it fundamentally
can't work in the way envisioned, because the stored representation looks
the same as for \\u0000 which is not the same thing at all. It's also
entirely bogus to output \u0000 when de-escaped output is called for.
The right way to do this would be to store an actual 0x00 byte, and then
throw error only if asked to produce de-escaped textual output. However,
getting to that point seems likely to take considerable work and may well
never be practical in the 9.4.x series.
To preserve our options for better behavior while getting rid of the nasty
side-effects of 0ad1a81632, revert that commit in toto and instead
throw error if \u0000 is used in a context where it needs to be de-escaped.
(These are the same contexts where non-ASCII Unicode escapes throw error
if the database encoding isn't UTF8, so this behavior is by no means
without precedent.)
In passing, make both the \u0000 case and the non-ASCII Unicode case report
ERRCODE_UNTRANSLATABLE_CHARACTER / "unsupported Unicode escape sequence"
rather than claiming there's something wrong with the input syntax.
Back-patch to 9.4, where we have to do something because 0ad1a81632
broke things for many cases having nothing to do with \u0000. 9.3 also has
bogus behavior, but only for that specific escape value, so given the lack
of field complaints it seems better to leave 9.3 alone.
At one point in the development of this feature, it was claimed that
allowing negative values would be useful to compensate for timezone
differences between master and slave servers. That was based on a mistaken
assumption that commit timestamps are recorded in local time; but of course
they're in UTC. Nor is a negative apply delay likely to be a sane way of
coping with server clock skew. However, the committed patch still treated
negative delays as doing something, and the timezone misapprehension
survived in the user documentation as well.
If recovery_min_apply_delay were a proper GUC we'd just set the minimum
allowed value to be zero; but for the moment it seems better to treat
negative settings as if they were zero.
In passing do some extra wordsmithing on the parameter's documentation,
including correcting a second misstatement that the parameter affects
processing of Restore Point records.
Issue noted by Michael Paquier, who also provided the code patch; doc
changes by me. Back-patch to 9.4 where the feature was introduced.
Use the phraseology "ISO 8601 week-numbering year" in place of just
"ISO year", and make related adjustments to other terminology.
The point of this change is that it seems some people see "ISO year"
and think "standard year", whereupon they're surprised when constructs
like to_char(..., "IYYY-MM-DD") produce nonsensical results. Perhaps
hanging a few more adjectives on it will discourage them from jumping
to false conclusions. I put in an explicit warning against that
specific usage, too, though the main point is to discourage people
who haven't read this far down the page.
In passing fix some nearby markup and terminology inconsistencies.
For simple boolean variables such as ON_ERROR_STOP, psql has for a long
time recognized variant spellings of "on" and "off" (such as "1"/"0"),
and it also made a point of warning you if you'd misspelled the setting.
But these conveniences did not exist for other keyword-valued variables.
In particular, though ECHO_HIDDEN and ON_ERROR_ROLLBACK include "on" and
"off" as possible values, none of the alternative spellings for those were
recognized; and to make matters worse the code would just silently assume
"on" was meant for any unrecognized spelling. Several people have reported
getting bitten by this, so let's fix it. In detail, this patch:
* Allows all spellings recognized by ParseVariableBool() for ECHO_HIDDEN
and ON_ERROR_ROLLBACK.
* Reports a warning for unrecognized values for COMP_KEYWORD_CASE, ECHO,
ECHO_HIDDEN, HISTCONTROL, ON_ERROR_ROLLBACK, and VERBOSITY.
* Recognizes all values for all these variables case-insensitively;
previously there was a mishmash of case-sensitive and case-insensitive
behaviors.
Back-patch to all supported branches. There is a small risk of breaking
existing scripts that were accidentally failing to malfunction; but the
consensus is that the chance of detecting real problems and preventing
future mistakes outweighs this.
Document the long forms of \H \i \ir \o \p \r \w ... apparently, we have
a long and dishonorable history of leaving out the unabbreviated names of
psql backslash commands.
Avoid saying "Unix shell"; we can just say "shell" with equal clarity,
and not leave Windows users wondering whether the feature works for them.
Improve consistency of documentation of \g \o \w metacommands. There's
no reason to use slightly different wording or markup for each one.
json_agg was originally designed to aggregate records. However, it soon
became clear that it is useful for aggregating all kinds of values and
that's what we have on 9.3 and 9.4, and in head for it and jsonb_agg.
The documentation suggested otherwise, so this fixes it.
Explain that you have to use "VARIADIC ARRAY[]" to pass an empty array
to a variadic parameter position. This was already implicit in the text
but it seems better to spell it out.
Per a suggestion from David Johnston, though I didn't use his proposed
wording. Back-patch to all supported branches.
The possibility that constant subexpressions of a CASE might be evaluated
at planning time was touched on in 9.17.1 (CASE expressions), but it really
ought to be explained in 4.2.14 (Expression Evaluation Rules) which is the
primary discussion of such topics. Add text and an example there, and
revise the <note> under CASE to link there.
Back-patch to all supported branches, since it's acted like this for a
long time (though 9.2+ is probably worse because of its more aggressive
use of constant-folding via replanning of nominally-prepared statements).
Pre-9.4, also back-patch text added in commit 0ce627d4 about CASE versus
aggregate functions.
Tom Lane and David Johnston, per discussion of bug #12273.
Use SSPI authentication to allow connections exclusively from the OS
user that launched the test suite. This closes on Windows the
vulnerability that commit be76a6d39e
closed on other platforms. Users of "make installcheck" or custom test
harnesses can run "pg_regress --config-auth=DATADIR" to activate the
same authentication configuration that "make check" would use.
Back-patch to 9.0 (all supported versions).
Security: CVE-2014-0067
The ALTER SYSTEM ref page hadn't been held to a very high standard, nor
was the feature well integrated into section 18.1 (parameter setting).
Also, though commit 4c4654afe had improved the structure of 18.1, it also
introduced a lot of poor wording, imprecision, and outright falsehoods.
Try to clean that up.
Commit 815d71dee hadn't bothered to update the documentation to match the
behavioral change, and a lot of other text in this section was badly in
need of copy-editing.
This reverts commit 9f80f4835a. The
function returned the raw value of a connection parameter, a task served
by PQconninfo(). The next commit will reimplement the psql \conninfo
change that way. Back-patch to 9.4, where that commit first appeared.
If the "dbname" attribute in PQconnectDBParams contained a connection string
or URI (and expand_dbname = TRUE), the database name from the connection
string could not be overridden by a subsequent "dbname" keyword in the
array. That was not intentional; all other options can be overridden.
Furthermore, any subsequent "dbname" caused the connection string from the
first dbname value to be processed again, overriding any values for the same
options that were given between the connection string and the second dbname
option.
In the passing, clarify in the docs that only the first dbname option in the
array is parsed as a connection string.
Alex Shulgin. Backpatch to all supported versions.
In bug #12000, Andreas Kunert complained that the documentation was
misleading in saying "FROM T1 CROSS JOIN T2 is equivalent to FROM T1, T2".
That's correct as far as it goes, but the equivalence doesn't hold when
you consider three or more tables, since JOIN binds more tightly than
comma. I added a <note> to explain this, and ended up rearranging some
of the existing text so that the note would make sense in context.
In passing, rewrite the description of JOIN USING, which was unnecessarily
vague, and hadn't been helped any by somebody's reliance on markup as a
substitute for clear writing. (Mostly this involved reintroducing a
concrete example that was unaccountably removed by commit 032f3b7e166cfa28.)
Back-patch to all supported branches.
The SELECT reference page didn't really address the question of when
aggregate function evaluation occurs, nor did the "expression evaluation
rules" documentation mention that CASE can't be used to control whether
an aggregate gets evaluated or not. Improve that.
Per discussion of bug #11661. Original text by Marti Raudsepp and Michael
Paquier, rewritten significantly by me.
When ALTER TABLESPACE MOVE ALL was changed to be ALTER TABLE ALL IN
TABLESPACE, the ALTER TABLESPACE summary should have been adjusted back
to its original definition.
Patch by Thom Brown (thanks!).
pgp_sym_encrypt's option is spelled "sess-key", not "enable-session-key".
Spotted by Jeff Janes.
In passing, improve a comment in pgp-pgsql.c to make it clearer that
the debugging options are intentionally undocumented.
