This commit changes libpq so that errors reported by the backend during
the protocol negotiation for SSL and GSS are discarded by the client, as
these may include bytes that could be consumed by the client and write
arbitrary bytes to a client's terminal.
A failure with the SSL negotiation now leads to an error immediately
reported, without a retry on any other methods allowed, like a fallback
to a plaintext connection.
A failure with GSS discards the error message received, and we allow a
fallback as it may be possible that the error is caused by a connection
attempt with a pre-11 server, GSS encryption having been introduced in
v12. This was a problem only with v17 and newer versions; older
versions discard the error message already in this case, assuming a
failure caused by a lack of support for GSS encryption.
Author: Jacob Champion
Reviewed-by: Peter Eisentraut, Heikki Linnakangas, Michael Paquier
Security: CVE-2024-10977
Backpatch-through: 12
Use pqParseIntParam (nee parse_int_param) instead of using strtol
directly. This allows trailing whitespace, which the previous coding
didn't, and makes the spelling of the error message consistent with
other similar cases.
This seems to be an oversight in commit e7a221797, which introduced
parse_int_param. That fixed places that were using atoi(), but missed
this place which was randomly using strtol() instead.
Ordinarily I'd consider this minor cleanup not worth back-patching.
However, it seems that ecpg assumes it can add trailing whitespace
to URL parameters, so that use of the keepalives option fails in
that context. Perhaps that's worth improving as a separate matter.
In the meantime, back-patch this to all supported branches.
Yuto Sasaki (some further cleanup by me)
Discussion: https://postgr.es/m/TY2PR01MB36286A7B97B9A15793335D18C1772@TY2PR01MB3628.jpnprd01.prod.outlook.com
Commit 453c468737 introduced a use of strerror() into libpq, but that
is not thread-safe. Fix by using strerror_r() instead.
In passing, update some of the code comments added by 453c468737, as
we have learned more about the reason for the change in OpenSSL that
started this.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: Discussion: https://postgr.es/m/b6fb018b-f05c-4afd-abd3-318c649faf18@highgo.ca
If we are building with openssl but USE_SSL_ENGINE didn't get set,
initialize_SSL's variable "pkey" is declared but used nowhere.
Apparently this combination hasn't been exercised in the buildfarm
before now, because I've not seen this warning before, even though
the code has been like this a long time. Move the declaration
to silence the warning (and remove its useless initialization).
Per buildfarm member sawshark. Back-patch to all supported branches.
In OpenSSL 3.0.0 and later, ERR_reason_error_string randomly refuses
to provide a string for error codes representing system errno values
(e.g., "No such file or directory"). There is a poorly-documented way
to extract the errno from the SSL error code in this case, so do that
and apply strerror, rather than falling back to reporting the error
code's numeric value as we were previously doing.
Problem reported by David Zhang, although this is not his proposed
patch; it's instead based on a suggestion from Heikki Linnakangas.
Back-patch to all supported branches, since any of them are likely
to be used with recent OpenSSL.
Discussion: https://postgr.es/m/b6fb018b-f05c-4afd-abd3-318c649faf18@highgo.ca
We previously supposed that it was okay for different threads to
call bindtextdomain() concurrently (cf. commit 1f655fdc3).
It now emerges that there's at least one gettext implementation
in which that triggers an abort() crash, so let's stop doing that.
Add mutexes guarding libpq's and ecpglib's calls, which are the
only ones that need worry about multithreaded callers.
Note: in libpq, we could perhaps have piggybacked on
default_threadlock() to avoid defining a new mutex variable.
I judge that not terribly safe though, since libpq_gettext could
be called from code that is holding the default mutex. If that
were the first such call in the process, it'd fail. An extra
mutex is cheap insurance against unforeseen interactions.
Per bug #18312 from Christian Maurer. Back-patch to all
supported versions.
Discussion: https://postgr.es/m/18312-bbbabc8113592b78@postgresql.org
Discussion: https://postgr.es/m/264860.1707163416@sss.pgh.pa.us
Fix pthread-win32.h and pthread-win32.c to provide a more complete
emulation of POSIX pthread mutexes: define PTHREAD_MUTEX_INITIALIZER
and make sure that pthread_mutex_lock() can operate on a mutex
object that's been initialized that way. Then we don't need the
duplicative platform-specific logic in default_threadlock() and
pgtls_init(), which we'd otherwise need yet a third copy of for
an upcoming bug fix.
Also, since default_threadlock() supposes that pthread_mutex_lock()
cannot fail, try to ensure that that's actually true, by getting
rid of the malloc call that was formerly involved in initializing
an emulated mutex. We can define an extra state for the spinlock
field instead.
Also, replace the similar code in ecpglib/misc.c with this version.
While ecpglib's version at least had a POSIX-compliant API, it
also had the potential of failing during mutex init (but here,
because of CreateMutex failure rather than malloc failure). Since
all of misc.c's callers ignore failures, it seems like a wise idea
to avoid failures here too.
A further improvement in this area could be to unify libpq's and
ecpglib's implementations into a src/port/pthread-win32.c file.
But that doesn't seem like a bug fix, so I'll desist for now.
In preparation for the aforementioned bug fix, back-patch to all
supported branches.
Discussion: https://postgr.es/m/264860.1707163416@sss.pgh.pa.us
OpenSSL will sometimes return SSL_ERROR_SYSCALL without having set
errno; this is apparently a reflection of recv(2)'s habit of not
setting errno when reporting EOF. Ensure that we treat such cases
the same as read EOF. Previously, we'd frequently report them like
"could not accept SSL connection: Success" which is confusing, or
worse report them with an unrelated errno left over from some
previous syscall.
To fix, ensure that errno is zeroed immediately before the call,
and report its value only when it's not zero afterwards; otherwise
report EOF.
For consistency, I've applied the same coding pattern in libpq's
pqsecure_raw_read(). Bare recv(2) shouldn't really return -1 without
setting errno, but in case it does we might as well cope.
Per report from Andres Freund. Back-patch to all supported versions.
Discussion: https://postgr.es/m/20231208181451.deqnflwxqoehhxpe@awork3.anarazel.de
We should have done it this way all along, but we accidentally got
away with using the wrong BIO field up until OpenSSL 3.2. There,
the library's BIO routines that we rely on use the "data" field
for their own purposes, and our conflicting use causes assorted
weird behaviors up to and including core dumps when SSL connections
are attempted. Switch to using the approved field for the purpose,
i.e. app_data.
While at it, remove our configure probes for BIO_get_data as well
as the fallback implementation. BIO_{get,set}_app_data have been
there since long before any OpenSSL version that we still support,
even in the back branches.
Also, update src/test/ssl/t/001_ssltests.pl to allow for a minor
change in an error message spelling that evidently came in with 3.2.
Tristan Partin and Bo Andreson. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAN55FZ1eDDYsYaL7mv+oSLUij2h_u6hvD4Qmv-7PK7jkji0uyQ@mail.gmail.com
The libpq code in charge of creating per-connection SSL objects was
prone to a race condition when loading the custom BIO methods needed by
my_SSL_set_fd(). As BIO methods are stored as a static variable, the
initialization of a connection could fail because it could be possible
to have one thread refer to my_bio_methods while it is being manipulated
by a second concurrent thread.
This error has been introduced by 8bb14cdd33, that has removed
ssl_config_mutex around the call of my_SSL_set_fd(), that itself sets
the custom BIO methods used in libpq. Like previously, the BIO method
initialization is now protected by the existing ssl_config_mutex, itself
initialized earlier for WIN32.
While on it, document that my_bio_methods is protected by
ssl_config_mutex, as this can be easy to miss.
Reported-by: Willi Mann
Author: Willi Mann, Michael Paquier
Discussion: https://postgr.es/m/e77abc4c-4d03-4058-a9d7-ef0035657e04@celonis.com
Backpatch-through: 12
When using GSSAPI encryption in non-blocking mode, libpq sometimes
failed with "GSSAPI caller failed to retransmit all data needing
to be retried". The cause is that pqPutMsgEnd rounds its transmit
request down to an even multiple of 8K, and sometimes that can lead
to not requesting a write of data that was requested to be written
(but reported as not written) earlier. That can upset pg_GSS_write's
logic for dealing with not-yet-written data, since it's possible
the data in question had already been incorporated into an encrypted
packet that we weren't able to send during the previous call.
We could fix this with a one-or-two-line hack to disable pqPutMsgEnd's
round-down behavior, but that seems like making the caller work around
a behavior that pg_GSS_write shouldn't expose in this way. Instead,
adjust pg_GSS_write to never report a partial write: it either
reports a complete write, or reflects the failure of the lower-level
pqsecure_raw_write call. The requirement still exists for the caller
to present at least as much data as on the previous call, but with
the caller-visible write start point not moving there is no temptation
for it to present less. We lose some ability to reclaim buffer space
early, but I doubt that that will make much difference in practice.
This also gets rid of a rather dubious assumption that "any
interesting failure condition (from pqsecure_raw_write) will recur
on the next try". We've not seen failure reports traceable to that,
but I've never trusted it particularly and am glad to remove it.
Make the same adjustments to the equivalent backend routine
be_gssapi_write(). It is probable that there's no bug on the backend
side, since we don't have a notion of nonblock mode there; but we
should keep the logic the same to ease future maintenance.
Per bug #18210 from Lars Kanis. Back-patch to all supported branches.
Discussion: https://postgr.es/m/18210-4c6d0b14627f2eb8@postgresql.org
The error cases for TLS and GSS encryption were inconsistent. After TLS
fails, the connection is marked as dead and follow-up calls of
PQconnectPoll() would return immediately, but GSS encryption was not
doing that, so the connection would still have been allowed to enter the
GSS handling code. This was handled incorrectly when gssencmode was set
to "require". "prefer" was working correctly, and this could not happen
under "disable" as GSS encryption would not be attempted.
This commit makes the error handling of GSS encryption on par with TLS
portion, fixing the case of gssencmode=require.
Reported-by: Jacob Champion
Author: Michael Paquier
Reviewed-by: Jacob Champion, Stephen Frost
Discussion: https://postgr.es/m/23787477-5fe1-a161-6d2a-e459f74c4713@timescale.com
Backpatch-through: 12
OpenSSL 1.1.1 and newer versions have added support for RSA-PSS
certificates, which requires the use of a specific routine in OpenSSL to
determine which hash function to use when compiling it when using
channel binding in SCRAM-SHA-256. X509_get_signature_nid(), that is the
original routine the channel binding code has relied on, is not able to
determine which hash algorithm to use for such certificates. However,
X509_get_signature_info(), new to OpenSSL 1.1.1, is able to do it. This
commit switches the channel binding logic to rely on
X509_get_signature_info() over X509_get_signature_nid(), which would be
the choice when building with 1.1.1 or newer.
The error could have been triggered on the client or the server, hence
libpq and the backend need to have their related code paths patched.
Note that attempting to load an RSA-PSS certificate with OpenSSL 1.1.0
or older leads to a failure due to an unsupported algorithm.
The discovery of relying on X509_get_signature_info() comes from Jacob,
the tests have been written by Heikki (with few tweaks from me), while I
have bundled the whole together while adding the bits needed for MSVC
and meson.
This issue exists since channel binding exists, so backpatch all the way
down. Some tests are added in 15~, triggered if compiling with OpenSSL
1.1.1 or newer, where the certificate and key files can easily be
generated for RSA-PSS.
Reported-by: Gunnar "Nick" Bluth
Author: Jacob Champion, Heikki Linnakangas
Discussion: https://postgr.es/m/17760-b6c61e752ec07060@postgresql.org
Backpatch-through: 11
pqsecure_open_gss() includes a code path handling error messages with
v2-style protocol messages coming from the server. The client-side
buffer holding the error message does not force a NULL-termination, with
the data of the server getting copied to the errorMessage of the
connection. Hence, it would be possible for a server to send an
unterminated string and copy arbitrary bytes in the buffer receiving the
error message in the client, opening the door to a crash or even data
exposure.
As at this stage of the authentication process the exchange has not been
completed yet, this could be abused by an attacker without Kerberos
credentials. Clients that have a valid kerberos cache are vulnerable as
libpq opportunistically requests for it except if gssencmode is
disabled.
Author: Jacob Champion
Backpatch-through: 12
Security: CVE-2022-41862
The frontend-side routine in charge of building a SCRAM verifier
mentioned that the restrictions applying to SASLprep on the password
with the encoding are described at the top of fe-auth-scram.c, but this
information is in auth-scram.c.
This is wrong since 8f8b9be, so backpatch all the way down as this is an
important documentation bit.
Spotted while reviewing a different patch.
Backpatch-through: 11
There's a convention that externally-visible libpq functions should
check for a NULL PGconn pointer, and fail gracefully instead of
crashing. PQflush() and PQisnonblocking() didn't get that memo
though. Also add a similar check to PQdefaultSSLKeyPassHook_OpenSSL;
while it's not clear that ordinary usage could reach that with a
null conn pointer, it's cheap enough to check, so let's be consistent.
Daniele Varrazzo and Tom Lane
Discussion: https://postgr.es/m/CA+mi_8Zm_mVVyW1iNFgyMd9Oh0Nv8-F+7Y3-BqwMgTMHuo_h2Q@mail.gmail.com
Commits a59c79564 et al. tried to sync libpq's SSL key file
permissions checks with what we've used for years in the backend.
We did not intend to create any new failure cases, but it turns out
we did: restricting the key file's ownership breaks cases where the
client is allowed to read a key file despite not having the identical
UID. In particular a client running as root used to be able to read
someone else's key file; and having seen that I suspect that there are
other, less-dubious use cases that this restriction breaks on some
platforms.
We don't really need an ownership check, since if we can read the key
file despite its having restricted permissions, it must have the right
ownership --- under normal conditions anyway, and the point of this
patch is that any additional corner cases where that works should be
deemed allowable, as they have been historically. Hence, just drop
the ownership check, and rearrange the permissions check to get rid
of its faulty assumption that geteuid() can't be zero. (Note that the
comparable backend-side code doesn't have to cater for geteuid() == 0,
since the server rejects that very early on.)
This does have the end result that the permissions safety check used
for a root user's private key file is weaker than that used for
anyone else's. While odd, root really ought to know what she's doing
with file permissions, so I think this is acceptable.
Per report from Yogendra Suralkar. Like the previous patch,
back-patch to all supported branches.
Discussion: https://postgr.es/m/MW3PR15MB3931DF96896DC36D21AFD47CA3D39@MW3PR15MB3931.namprd15.prod.outlook.com
pg_regress reported "Unix socket" as the default location whenever
HAVE_UNIX_SOCKETS is defined. However, that's not been accurate
on Windows since 8f3ec75de. Update this logic to match what libpq
actually does now.
This is just cosmetic, but still it's potentially misleading.
Back-patch to v13 where 8f3ec75de came in.
Discussion: https://postgr.es/m/3894060.1646415641@sss.pgh.pa.us
This change makes libpq apply the same private-key-file ownership
and permissions checks that we have used in the backend since commit
9a83564c5. Namely, that the private key can be owned by either the
current user or root (with different file permissions allowed in the
two cases). This allows system-wide management of key files, which
is just as sensible on the client side as the server, particularly
when the client is itself some application daemon.
Sync the comments about this between libpq and the backend, too.
Back-patch of a59c79564 and 50f03473e into all supported branches.
David Steele
Discussion: https://postgr.es/m/f4b7bc55-97ac-9e69-7398-335e212f7743@pgmasters.net
In commit 1f39a1c06 I made PQisBusy consider conn->write_failed, but
that is now looking like complete brain fade. In the first place, the
logic is quite wrong: it ought to be like "and not" rather than "or".
This meant that once we'd gotten into a write_failed state, PQisBusy
would always return true, probably causing the calling application to
iterate its loop until PQconsumeInput returns a hard failure thanks
to connection loss. That's not what we want: the intended behavior
is to return an error PGresult, which the application probably has
much cleaner support for.
But in the second place, checking write_failed here seems like the
wrong thing anyway. The idea of the write_failed mechanism is to
postpone handling of a write failure until we've read all we can from
the server; so that flag should not interfere with input-processing
behavior. (Compare 7247e243a.) What we *should* check for is
status = CONNECTION_BAD, ie, socket already closed. (Most places that
close the socket don't touch asyncStatus, but they do reset status.)
This primarily ensures that if PQisBusy() returns true then there is
an open socket, which is assumed by several call sites in our own
code, and probably other applications too.
While at it, fix a nearby thinko in libpq's my_sock_write: we should
only consult errno for res < 0, not res == 0. This is harmless since
pqsecure_raw_write would force errno to zero in such a case, but it
still could confuse readers.
Noted by Andres Freund. Backpatch to v12 where 1f39a1c06 came in.
Discussion: https://postgr.es/m/20220211011025.ek7exh6owpzjyudn@alap3.anarazel.de
In libpq and ecpglib, multiple threads can concurrently enter the
initialization logic for message localization. Since we set the
its-done flag before actually doing the work, it'd be possible
for some threads to reach gettext() before anyone has called
bindtextdomain(). Barring bugs in libintl itself, this would not
result in anything worse than failure to localize some early
messages. Nonetheless, it's a bug, and an easy one to fix.
Noted while investigating bug #17299 from Clemens Zeidler
(much thanks to Liam Bowen for followup investigation on that).
It currently appears that that actually *is* a bug in libintl itself,
but that doesn't let us off the hook for this bit.
Back-patch to all supported versions.
Discussion: https://postgr.es/m/17299-7270741958c0b1ab@postgresql.org
Discussion: https://postgr.es/m/CAE7q7Eit4Eq2=bxce=Fm8HAStECjaXUE=WBQc-sDDcgJQ7s7eg@mail.gmail.com
PQcancel() is supposed to be safe to call from a signal handler,
and indeed psql uses it that way. All of the library functions
it uses are specified to be async-signal-safe by POSIX ...
except for strerror. Neither plain strerror nor strerror_r
are considered safe. When this code was written, back in the
dark ages, we probably figured "oh, strerror will just index
into a constant array of strings" ... but in any locale except C,
that's unlikely to be true. Probably the reason we've not heard
complaints is that (a) this error-handling code is unlikely to be
reached in normal use, and (b) in many scenarios, localized error
strings would already have been loaded, after which maybe it's
safe to call strerror here. Still, this is clearly unacceptable.
The best we can do without relying on strerror is to print the
decimal value of errno, so make it do that instead. (This is
probably not much loss of user-friendliness, given that it is
hard to get a failure here.)
Back-patch to all supported branches.
Discussion: https://postgr.es/m/2937814.1641960929@sss.pgh.pa.us
libpq collects up to a bufferload of data whenever it reads data from
the socket. When SSL or GSS encryption is requested during startup,
any additional data received with the server's yes-or-no reply
remained in the buffer, and would be treated as already-decrypted data
once the encryption handshake completed. Thus, a man-in-the-middle
with the ability to inject data into the TCP connection could stuff
some cleartext data into the start of a supposedly encryption-protected
database session.
This could probably be abused to inject faked responses to the
client's first few queries, although other details of libpq's behavior
make that harder than it sounds. A different line of attack is to
exfiltrate the client's password, or other sensitive data that might
be sent early in the session. That has been shown to be possible with
a server vulnerable to CVE-2021-23214.
To fix, throw a protocol-violation error if the internal buffer
is not empty after the encryption handshake.
Our thanks to Jacob Champion for reporting this problem.
Security: CVE-2021-23222
In OpenSSL there are two types of BIO's (I/O abstractions):
source/sink and filters. A source/sink BIO is a source and/or
sink of data, ie one acting on a socket or a file. A filter
BIO takes a stream of input from another BIO and transforms it.
In order for BIO_find_type() to be able to traverse the chain
of BIO's and correctly find all BIO's of a certain type they
shall have the type bit set accordingly, source/sink BIO's
(what PostgreSQL implements) use BIO_TYPE_SOURCE_SINK and
filter BIO's use BIO_TYPE_FILTER. In addition to these, file
descriptor based BIO's should have the descriptor bit set,
BIO_TYPE_DESCRIPTOR.
The PostgreSQL implementation didn't set the type bits, which
went unnoticed for a long time as it's only really relevant
for code auditing the OpenSSL installation, or doing similar
tasks. It is required by the API though, so this fixes it.
Backpatch through 9.6 as this has been wrong for a long time.
Author: Itamar Gafni
Discussion: https://postgr.es/m/SN6PR06MB39665EC10C34BB20956AE4578AF39@SN6PR06MB3966.namprd06.prod.outlook.com
Backpatch-through: 9.6
Causing a core dump on out-of-memory seems pretty unfriendly,
and surely is far outside the expected behavior of a general-purpose
library. Just print an error message (as we did already) and return.
These functions unfortunately don't have an error return convention,
but code using them is probably just looking for a quick-n-dirty
print method and wouldn't bother to check anyway.
Although these functions are semi-deprecated, it still seems
appropriate to back-patch this. In passing, also back-patch
b90e6cef1, just to reduce cosmetic differences between the
branches.
Discussion: https://postgr.es/m/3122443.1624735363@sss.pgh.pa.us
Our uses of gss_display_status() and gss_display_name() assumed
that the gss_buffer_desc strings returned by those functions are
null-terminated. It appears that they generally are, given the
lack of field complaints up to now. However, the available
documentation does not promise this, and some man pages
for gss_display_status() show examples that rely on the
gss_buffer_desc.length field instead of expecting null
termination. Also, we now have a report that on some
implementations, clang's address sanitizer is of the opinion
that the byte after the specified length is undefined.
Hence, change the code to rely on the length field instead.
This might well be cosmetic rather than fixing any real bug, but
it's hard to be sure, so back-patch to all supported branches.
While here, also back-patch the v12 changes that made pg_GSS_error
deal honestly with multiple messages available from
gss_display_status.
Per report from Sudheer H R.
Discussion: https://postgr.es/m/5372B6D4-8276-42C0-B8FB-BD0918826FC3@tekenlight.com
An incorrectly-encoded multibyte character near the end of a string
could cause various processing loops to run past the string's
terminating NUL, with results ranging from no detectable issue to
a program crash, depending on what happens to be in the following
memory.
This isn't an issue in the server, because we take care to verify
the encoding of strings before doing any interesting processing
on them. However, that lack of care leaked into client-side code
which shouldn't assume that anyone has validated the encoding of
its input.
Although this is certainly a bug worth fixing, the PG security team
elected not to regard it as a security issue, primarily because
any untrusted text should be sanitized by PQescapeLiteral or
the like before being incorporated into a SQL or psql command.
(If an app fails to do so, the same technique can be used to
cause SQL injection, with probably much more dire consequences
than a mere client-program crash.) Those functions were already
made proof against this class of problem, cf CVE-2006-2313.
To fix, invent PQmblenBounded() which is like PQmblen() except it
won't return more than the number of bytes remaining in the string.
In HEAD we can make this a new libpq function, as PQmblen() is.
It seems imprudent to change libpq's API in stable branches though,
so in the back branches define PQmblenBounded as a macro in the files
that need it. (Note that just changing PQmblen's behavior would not
be a good idea; notably, it would completely break the escaping
functions' defense against this exact problem. So we just want a
version for those callers that don't have any better way of handling
this issue.)
Per private report from houjingyi. Back-patch to all supported branches.
Commit 92785dac2 copied some logic related to advancement of inStart
from pqParseInput3 into getRowDescriptions and getAnotherTuple,
because it wanted to allow user-defined row processor callbacks to
potentially longjmp out of the library, and inStart would have to be
updated before that happened to avoid an infinite loop. We later
decided that that API was impossibly fragile and reverted it, but
we didn't undo all of the related code changes, and this bit of
messiness survived. Undo it now so that there's just one place in
pqParseInput3's processing where inStart is advanced; this will
simplify addition of better tracing support.
getParamDescriptions had grown similar processing somewhere along
the way (not in 92785dac2; I didn't track down just when), but it's
actually buggy because its handling of corrupt-message cases seems to
have been copied from the v2 logic where we lacked a known message
length. The cases where we "goto not_enough_data" should not simply
return EOF, because then we won't consume the message, potentially
creating an infinite loop. That situation now represents a
definitively corrupt message, and we should report it as such.
Although no field reports of getParamDescriptions getting stuck in
a loop have been seen, it seems appropriate to back-patch that fix.
I chose to back-patch all of this to keep the logic looking more alike
in supported branches.
Discussion: https://postgr.es/m/2217283.1615411989@sss.pgh.pa.us
The critical issue fixed here is that if a GSSAPI-encrypted connection
is successfully made, pqsecure_open_gss() cleared conn->allow_ssl_try,
as an admittedly-hacky way of preventing us from then trying to tunnel
SSL encryption over the already-encrypted connection. The problem
with that is that if we abandon the GSSAPI connection because of a
failure during authentication, we would not attempt SSL encryption
in the next try with the same server. This can lead to unexpected
connection failure, or silently getting a non-encrypted connection
where an encrypted one is expected.
Fortunately, we'd only manage to make a GSSAPI-encrypted connection
if both client and server hold valid tickets in the same Kerberos
infrastructure, which is a relatively uncommon environment.
Nonetheless this is a very nasty bug with potential security
consequences. To fix, don't reset the flag, instead adding a
check for conn->gssenc being already true when deciding whether
to try to initiate SSL.
While here, fix some lesser issues in libpq's GSSAPI code:
* Use the need_new_connection stanza when dropping an attempted
GSSAPI connection, instead of partially duplicating that code.
The consequences of this are pretty minor: AFAICS it could only
lead to auth_req_received or password_needed remaining set when
they shouldn't, which is not too harmful.
* Fix pg_GSS_error() to not repeat the "mprefix" it's given multiple
times, and to notice any failure return from gss_display_status().
* Avoid gratuitous dependency on NI_MAXHOST in
pg_GSS_load_servicename().
Per report from Mikael Gustavsson. Back-patch to v12 where
this code was introduced.
Discussion: https://postgr.es/m/e5b0b6ed05764324a2f3fe7acfc766d5@smhi.se
The Windows documentation insists that every WSAStartup call should
have a matching WSACleanup call. However, if that ever had actual
relevance, it wasn't in this century. Every remotely-modern Windows
kernel is capable of cleaning up when a process exits without doing
that, and must be so to avoid resource leaks in case of a process
crash. Moreover, Postgres backends have done WSAStartup without
WSACleanup since commit 4cdf51e64 in 2004, and we've never seen any
indication of a problem with that.
libpq's habit of doing WSAStartup during connection start and
WSACleanup during shutdown is also rather inefficient, since a
series of non-overlapping connection requests leads to repeated,
quite expensive DLL unload/reload cycles. We document a workaround
for that (having the application call WSAStartup for itself), but
that's just a kluge. It's also worth noting that it's far from
uncommon for applications to exit without doing PQfinish, and
we've not heard reports of trouble from that either.
However, the real reason for acting on this is that recent
experiments by Alexander Lakhin show that calling WSACleanup
during PQfinish is triggering the symptom we occasionally see
that a process using libpq fails to emit expected stdio output.
Therefore, let's change libpq so that it calls WSAStartup only
once per process, during the first connection attempt, and never
calls WSACleanup at all.
While at it, get rid of the only other WSACleanup call in our code
tree, in pg_dump/parallel.c; that presumably is equally useless.
Back-patch of HEAD commit 7d00a6b2d.
Discussion: https://postgr.es/m/ac976d8c-03df-d6b8-025c-15a2de8d9af1@postgrespro.ru
Historically there's been a hard-wired assumption here that no line of
a .pgpass file could be as long as NAMEDATALEN*5 bytes. That's a bit
shaky to start off with, because (a) there's no reason to suppose that
host names fit in NAMEDATALEN, and (b) this figure fails to allow for
backslash escape characters. However, it fails completely if someone
wants to use a very long password, and we're now hearing reports of
people wanting to use "security tokens" that can run up to several
hundred bytes. Another angle is that the file is specified to allow
comment lines, but there's no reason to assume that long comment lines
aren't possible.
Rather than guessing at what might be a more suitable limit, let's
replace the fixed-size buffer with an expansible PQExpBuffer. That
adds one malloc/free cycle to the typical use-case, but that's surely
pretty cheap relative to the I/O this code has to do.
Also, add TAP test cases to exercise this code, because there was no
test coverage before.
This reverts most of commit 2eb3bc588, as there's no longer a need for
a warning message about overlength .pgpass lines. (I kept the explicit
check for comment lines, though.)
In HEAD and v13, this also fixes an oversight in 74a308cf5: there's not
much point in explicit_bzero'ing the line buffer if we only do so in two
of the three exit paths.
Back-patch to all supported branches, except that the test case only
goes back to v10 where src/test/authentication/ was added.
Discussion: https://postgr.es/m/4187382.1598909041@sss.pgh.pa.us
