Bruce Hartzler <bruceh@mail.utexas.edu>. It contains shared library
support, regression test map, and the usual template files. The dynamic
loader is missing, the spin lock code apparently doesn't assemble due to
syntax problems, and semaphores are to be hoped for from Apple.
equivalent.
In linux.h there were some #undef HAVE_INT_TIMEZONE, which are useless
because HAVE_TM_ZONE overrides it anyway, and messing with configure
results isn't cool.
* Makefile: Add more standard targets. Improve shell redirection in GNU
make detection.
* src/backend/access/transam/rmgr.c: Fix incorrect(?) C.
* src/backend/libpq/pqcomm.c (StreamConnection): Work around accept() bug.
* src/include/port/unixware.h: ...with help from here.
* src/backend/nodes/print.c (plannode_type): Remove some "break"s after
"return"s.
* src/backend/tcop/dest.c (DestToFunction): ditto.
* src/backend/nodes/readfuncs.c: Add proper prototypes.
* src/backend/utils/adt/numutils.c (pg_atoi): Cope specially with strtol()
setting EINVAL. This saves us from creating an extra set of regression test
output for the affected systems.
* src/include/storage/s_lock.h (tas): Correct prototype.
* src/interfaces/libpq/fe-connect.c (parseServiceInfo): Don't use variable
as dimension in array definition.
* src/makefiles/Makefile.unixware: Add support for GCC.
* src/template/unixware: same here
* src/test/regress/expected/abstime-solaris-1947.out: Adjust whitespace.
* src/test/regress/expected/horology-solaris-1947.out: Part of this file
was evidently missing.
* src/test/regress/pg_regress.sh: Fix shell. mkdir -p returns non-zero if
the directory exists.
* src/test/regress/resultmap: Add entries for Unixware.
Makefile.port, since they are of no use to configure and much of the
library magic happens in Makefile.port anyway.
Use __alpha, not __alpha__, since the former is universally available.
Remove -DNOFIXADE from the compile command line and put it in the port
include file.
> > For a while I though it might be because we are using an alpha TAS in
> > the spinlock rather than the old semaphore. I replaced our spinlock
> > with the standard one and it made no difference. We have been running
> > with our spinlock implementation for nearly 2 months on a production
> > database now without a hitch, so I think it is ok. Did I ever submit
> > any patches for the Alpha spinlock?
>
> Not that I recall. We did get some advice from some Alpha gurus at DEC
> who seemed to think the existing TAS code is OK. What was it that you
> felt needed to be improved?
The current code uses semaphores, which has the advantage that it works
well even on multi-processor machines, but the disadvantage that it is not
the fastest way possible. Writing a spinlock on Alpha for SMP machines is
very difficult, as you need to deal with memory barriers. A real mess. But
then one of the people at Compaq pointed out to us that there is a
ready-made routine on Alpha. We implemented it with the two patches below.
I ran tests with lots of parallel back-ends and got around a 10% speed
increase. I include the two patches. Perhaps some of the other people
running Tru64 can have a look at these as well.
Cheers,
Adriaan Joubert
after that dynamic loading isn't working and shared memory handling is
broken.
Attached with this message, there is a Zip file which contain :
* beos.diff = patch file generated with difforig
* beos = folder with beos support files which need to be moved in /
src/backend/port
* expected = foler with three file for message and precision
difference in regression test
* regression.diff = rule problem (need to kill the backend manualy)
* dynloader = dynloader files (they are also in the pacth files,
but there is so much modification that I have join full files)
Everything works except a problem in 'rules' Is there some problems
with rules in the current tree ? It used to works with last week tree.
Cyril VELTER
working on the VERY latest version of BeOS. I'm sure there will be
alot of comments, but then if there weren't I'd be disappointed!
Thanks for your continuing efforts to get this into your tree.
Haven't bothered with the new files as they haven't changed.
BTW Peter, the compiler is "broken" about the bool define and so on.
I'm filing a bug report to try and get it addressed. Hopefully then we
can tidy up the code a bit.
I await the replies with interest :)
David Reid
problems with some bits of it, but when all the patches are in it'll build
and we can fix it from there :) I've got a version that builds and runs and
that is the basis for these patches.
The first file has the new additional files that are required,
template/beos
backend/port/dynloader/beos.c
backend/port/dynloader/beos.h
include/port/beos.h
makefiles/Makefile.beos
The second is a tarball of diffs against a few files. I've added sys/ipc.h
to configure and config.h via configure.in and config.h.in and then started
adding the check as this file isn't needed on BeOS and having loads of
#ifdef BEOS isn't as obvious as #ifdef HAVE_SYS_IPC_H and isn't as
autconf'ish :)
Files touched are
include/c.h
configure.in
include/config.h.in
include/storage/ipc.h
include/utils/int8.h
Let me know how these go. I'll await a response before submitting any more.
Any problems just get in touch.
David Reid
PostgreSQL-7.0.2 run on Linux for the Intel-IA64 architecture. It also
fixes a bug in the configure scripts that caused configure to fail on
the fcntl(F_SETLK) test.
This fix triggered a bug in the fcntl(F_SETLK) code of the Linux
kernel when used on unix domain sockets resulting in postmaster to
segfault immediately after startup. There is a fix available and
included in the kernel that will be on SuSE Linux 7.0, but kernels <=
2.2.16 still have this bug.
Reinhard Max
all platforms, not just SCO. The operation is undefined for Unix-domain
sockets anyway. It seems SCO is not the only platform that complains
instead of treating the call as a no-op.
1) adds NetBSD shared lib support on both ELF and a.out platforms
2) replaces "-L$(LIBPQDIR) -lpq" with "$(LIBPQ)" defined in
Makefile.global. This makes it much easier to build stuff in
the source tree after you've already installed the libraries.
3) adds TEMPLATEDIR in Makefile.global that indicates where the
database templates are stored. This separates the template files
from real libraries that are installed in $(LIBDIR).
4) changes include order of <readline/readline.h> and <readline.h>.
The latest GNU readline installs its headers under a readline
subdirectory.
In addition to applying the patch below the following files need to be copied:
backend/port/dynloader:
bsd.h -> netbsd.h
bsd.c -> netbsd.c
include/port:
bsd.h -> netbsd.h
makefiles:
Makefile.bsd -> Makefile.netbsd
It would be great to see this incorporated into the source tree before
the 7.0 release is cut.
Thanks!
-- Johnny C. Lam <lamj@stat.cmu.edu>
am including a patch to get it compile.
changes to psql:
- added less as default pager when compiling on Cygwin
- need to declare "filename_completion_function" because it is not exported
from readline -> added to include/port/win.h
changes to pg_id:
- include of <getopt.h>
- add .exe when installing
I think there is a problem with calling the regress tests on WinNT - it
should be called with PORTNAME not HOST as the parameter to regress.sh or
the check when to add "-h localhost" to psql has to be changed. Now it is
checked against the PORTNAME.
The results of the regress tests were OK with expected failures ;-)
Daniel Horak
eliminating some wildly inconsistent coding in various parts of the
system. I set MAXPGPATH = 1024 in config.h.in. If anyone is really
convinced that there ought to be a configure-time test to set the
value, go right ahead ... but I think it's a waste of time.
Cygwin snapshots (tested on 990115 which is recommended to use - it fixes
some errors in B20.1)
And I have another patch for including <sys/ipc.h> before <sys/sem.h> in
backend/storage/lmgr/proc.c - it is required due the design of cygipc
headers
Dan
it with configure-script tests to see whether const, inline, volatile, etc
work or not. (Curiously, configure was already doing the work to see if
const and inline were OK, but the results were not getting plugged into
config.h :-(.)
NetBSD/macppc
LinuxPPC
FreeBSD 2.2.6-RELEASE
All of them seem happy with the regression test. Note that, however,
compiling with optimization enabled on NetBSD/macppc causes an initdb
failure (other two platforms are ok). After checking the asm code, we
are suspecting that might be a compiler(egcs) bug.
Tatsuo Ishii
SunOS has tas(), but not memmove or strerror, and its sprintf() doesn't
return int. Also, older versions of GNU Make don't like rules with
empty left-hand sides...
instead of relying on port's os.h to tell us. (Needed for HPUX
where system major version is not enough info.)
configure unsets USE_TK if X libraries not found.
doc/Makefile uses gzcat or zcat as found by autoconf.
