If an allocation fails in the main message handling loop, pqParseInput3
or pqParseInput2, it should not be treated as "not enough data available
yet". Otherwise libpq will wait indefinitely for more data to arrive from
the server, and gets stuck forever.
This isn't a complete fix - getParamDescriptions and getCopyStart still
have the same issue, but it's a step in the right direction.
Michael Paquier and me. Backpatch to all supported versions.
This reverts commit 16304a0134, except
for its changes in src/port/snprintf.c; as well as commit
cac18a76bb which is no longer needed.
Fujii Masao reported that the previous commit caused failures in psql on
OS X, since if one exits the pager program early while viewing a query
result, psql sees an EPIPE error from fprintf --- and the wrapper function
thought that was reason to panic. (It's a bit surprising that the same
does not happen on Linux.) Further discussion among the security list
concluded that the risk of other such failures was far too great, and
that the one-size-fits-all approach to error handling embodied in the
previous patch is unlikely to be workable.
This leaves us again exposed to the possibility of the type of failure
envisioned in CVE-2015-3166. However, that failure mode is strictly
hypothetical at this point: there is no concrete reason to believe that
an attacker could trigger information disclosure through the supposed
mechanism. In the first place, the attack surface is fairly limited,
since so much of what the backend does with format strings goes through
stringinfo.c or psprintf(), and those already had adequate defenses.
In the second place, even granting that an unprivileged attacker could
control the occurrence of ENOMEM with some precision, it's a stretch to
believe that he could induce it just where the target buffer contains some
valuable information. So we concluded that the risk of non-hypothetical
problems induced by the patch greatly outweighs the security risks.
We will therefore revert, and instead undertake closer analysis to
identify specific calls that may need hardening, rather than attempt a
universal solution.
We have kept the portion of the previous patch that improved snprintf.c's
handling of errors when it calls the platform's sprintf(). That seems to
be an unalloyed improvement.
Security: CVE-2015-3166
All known standard library implementations of these functions can fail
with ENOMEM. A caller neglecting to check for failure would experience
missing output, information exposure, or a crash. Check return values
within wrappers and code, currently just snprintf.c, that bypasses the
wrappers. The wrappers do not return after an error, so their callers
need not check. Back-patch to 9.0 (all supported versions).
Popular free software standard library implementations do take pains to
bypass malloc() in simple cases, but they risk ENOMEM for floating point
numbers, positional arguments, large field widths, and large precisions.
No specification demands such caution, so this commit regards every call
to a printf family function as a potential threat.
Injecting the wrappers implicitly is a compromise between patch scope
and design goals. I would prefer to edit each call site to name a
wrapper explicitly. libpq and the ECPG libraries would, ideally, convey
errors to the caller rather than abort(). All that would be painfully
invasive for a back-patched security fix, hence this compromise.
Security: CVE-2015-3166
If someone else already set the callbacks, don't overwrite them with
ours. When unsetting the callbacks, only unset them if they point to
ours.
Author: Jan Urbański <wulczer@wulczer.org>
This is the second try at this, after fcef161729 failed miserably and
had to be reverted: as it turns out, libpq cannot depend on libpgcommon
after all. Instead of shuffling code in the master branch, make that one
just like 9.4 and accept the duplication. (This was all my own mistake,
not the patch submitter's).
psql was already accepting conninfo strings as the first parameter in
\connect, but the way it worked wasn't sane; some of the other
parameters would get the previous connection's values, causing it to
connect to a completely unexpected server or, more likely, not finding
any server at all because of completely wrong combinations of
parameters.
Fix by explicitely checking for a conninfo-looking parameter in the
dbname position; if one is found, use its complete specification rather
than mix with the other arguments. Also, change tab-completion to not
try to complete conninfo/URI-looking "dbnames" and document that
conninfos are accepted as first argument.
There was a weak consensus to backpatch this, because while the behavior
of using the dbname as a conninfo is nowhere documented for \connect, it
is reasonable to expect that it works because it does work in many other
contexts. Therefore this is backpatched all the way back to 9.0.
Author: David Fetter, Andrew Dunstan. Some editorialization by me
(probably earning a Gierth's "Sloppy" badge in the process.)
Reviewers: Andrew Gierth, Erik Rijkers, Pavel Stěhule, Stephen Frost,
Robert Haas, Andrew Dunstan.
psql was already accepting conninfo strings as the first parameter in
\connect, but the way it worked wasn't sane; some of the other
parameters would get the previous connection's values, causing it to
connect to a completely unexpected server or, more likely, not finding
any server at all because of completely wrong combinations of
parameters.
Fix by explicitely checking for a conninfo-looking parameter in the
dbname position; if one is found, use its complete specification rather
than mix with the other arguments. Also, change tab-completion to not
try to complete conninfo/URI-looking "dbnames" and document that
conninfos are accepted as first argument.
There was a weak consensus to backpatch this, because while the behavior
of using the dbname as a conninfo is nowhere documented for \connect, it
is reasonable to expect that it works because it does work in many other
contexts. Therefore this is backpatched all the way back to 9.0.
To implement this, routines previously private to libpq have been
duplicated so that psql can decide what looks like a conninfo/URI
string. In back branches, just duplicate the same code all the way back
to 9.2, where URIs where introduced; 9.0 and 9.1 have a simpler version.
In master, the routines are moved to src/common and renamed.
Author: David Fetter, Andrew Dunstan. Some editorialization by me
(probably earning a Gierth's "Sloppy" badge in the process.)
Reviewers: Andrew Gierth, Erik Rijkers, Pavel Stěhule, Stephen Frost,
Robert Haas, Andrew Dunstan.
This improves on commit bbfd7edae5 by
making two simple changes:
* pg_attribute_noreturn now takes parentheses, ie pg_attribute_noreturn().
Likewise pg_attribute_unused(), pg_attribute_packed(). This reduces
pgindent's tendency to misformat declarations involving them.
* attributes are now always attached to function declarations, not
definitions. Previously some places were taking creative shortcuts,
which were not merely candidates for bad misformatting by pgindent
but often were outright wrong anyway. (It does little good to put a
noreturn annotation where callers can't see it.) In any case, if
we would like to believe that these macros can be used with non-gcc
compilers, we should avoid gratuitous variance in usage patterns.
I also went through and manually improved the formatting of a lot of
declarations, and got rid of excessively repetitive (and now obsolete
anyway) comments informing the reader what pg_attribute_printf is for.
Until now __attribute__() was defined to be empty for all compilers but
gcc. That's problematic because it prevents using it in other compilers;
which is necessary e.g. for atomics portability. It's also just
generally dubious to do so in a header as widely included as c.h.
Instead add pg_attribute_format_arg, pg_attribute_printf,
pg_attribute_noreturn macros which are implemented in the compilers that
understand them. Also add pg_attribute_noreturn and pg_attribute_packed,
but don't provide fallbacks, since they can affect functionality.
This means that external code that, possibly unwittingly, relied on
__attribute__ defined to be empty on !gcc compilers may now run into
warnings or errors on those compilers. But there shouldn't be many
occurances of that and it's hard to work around...
Discussion: 54B58BA3.8040302@ohmu.fi
Author: Oskari Saarenmaa, with some minor changes by me.
This is a possibly-vain effort to silence a Coverity warning about
bogus endianness dependency. The code's fine, because it takes care
of endianness issues for itself, but Coverity sees an int64 being
passed to an int* argument and not unreasonably suspects something's
wrong. I'm not sure if putting the void* cast in the way will shut it
up; but it can't hurt and seems better from a documentation standpoint
anyway, since the pointer is not used as an int* in this code path.
Just for a bit of additional safety, verify that the result length
is 8 bytes as expected.
Back-patch to 9.3 where the code in question was added.
The SGML docs claimed that 1-byte integers could be sent or received with
the "isint" options, but no such behavior has ever been implemented in
pqGetInt() or pqPutInt(). The in-code documentation header for PQfn() was
even less in tune with reality, and the code itself used parameter names
matching neither the SGML docs nor its libpq-fe.h declaration. Do a bit
of additional wordsmithing on the SGML docs while at it.
Since the business about 1-byte integers is a clear documentation bug,
back-patch to all supported branches.
If libpq output buffer is full, pqSendSome() function tries to drain any
incoming data. This avoids deadlock, if the server e.g. sends a lot of
NOTICE messages, and blocks until we read them. However, pqSendSome() only
did that in blocking mode. In non-blocking mode, the deadlock could still
happen.
To fix, take a two-pronged approach:
1. Change the documentation to instruct that when PQflush() returns 1, you
should wait for both read- and write-ready, and call PQconsumeInput() if it
becomes read-ready. That fixes the deadlock, but applications are not going
to change overnight.
2. In pqSendSome(), drain the input buffer before returning 1. This
alleviates the problem for applications that only wait for write-ready. In
particular, a slow but steady stream of NOTICE messages during COPY FROM
STDIN will no longer cause a deadlock. The risk remains that the server
attempts to send a large burst of data and fills its output buffer, and at
the same time the client also sends enough data to fill its output buffer.
The application will deadlock if it goes to sleep, waiting for the socket
to become write-ready, before the server's data arrives. In practice,
NOTICE messages and such that the server might be sending are usually
short, so it's highly unlikely that the server would fill its output buffer
so quickly.
Backpatch to all supported versions.
After finding an "=" character, the pointer was advanced twice when it
should only advance once. This is harmless as long as the value after "="
has at least one character; but if it doesn't, we'd miss the terminator
character and include too much in the value.
In principle this could lead to reading off the end of memory. It does not
seem worth treating as a security issue though, because it would happen on
client side, and besides client logic that's taking conninfo strings from
untrusted sources has much worse security problems than this.
Report and patch received off-list from Thomas Fanghaenel.
Back-patch to 9.2 where the faulty code was introduced.
All the other new SSL information functions had dummy versions in
be-secure.c, but I missed PQsslAttributes(). Oops. Surprisingly, the linker
did not complain about the missing function on most platforms represented in
the buildfarm, even though it is exported, except for a few Windows systems.
This makes it possible to query for things like the SSL version and cipher
used, without depending on OpenSSL functions or macros. That is a good
thing if we ever get another SSL implementation.
PQgetssl() still works, but it should be considered as deprecated as it
only works with OpenSSL. In particular, PQgetSslInUse() should be used to
check if a connection uses SSL, because as soon as we have another
implementation, PQgetssl() will return NULL even if SSL is in use.
strncpy() has a well-deserved reputation for being unsafe, so make an
effort to get rid of nearly all occurrences in HEAD.
A large fraction of the remaining uses were passing length less than or
equal to the known strlen() of the source, in which case no null-padding
can occur and the behavior is equivalent to memcpy(), though doubtless
slower and certainly harder to reason about. So just use memcpy() in
these cases.
In other cases, use either StrNCpy() or strlcpy() as appropriate (depending
on whether padding to the full length of the destination buffer seems
useful).
I left a few strncpy() calls alone in the src/timezone/ code, to keep it
in sync with upstream (the IANA tzcode distribution). There are also a
few such calls in ecpg that could possibly do with more analysis.
AFAICT, none of these changes are more than cosmetic, except for the four
occurrences in fe-secure-openssl.c, which are in fact buggy: an overlength
source leads to a non-null-terminated destination buffer and ensuing
misbehavior. These don't seem like security issues, first because no stack
clobber is possible and second because if your values of sslcert etc are
coming from untrusted sources then you've got problems way worse than this.
Still, it's undesirable to have unpredictable behavior for overlength
inputs, so back-patch those four changes to all active branches.
Some users run their applications in chroot environments that lack an
/etc/passwd file. This means that the current UID's user name and home
directory are not obtainable. libpq used to be all right with that,
so long as the database role name to use was specified explicitly.
But commit a4c8f14364 broke such cases by
causing any failure of pg_fe_getauthname() to be treated as a hard error.
In any case it did little to advance its nominal goal of causing errors
in pg_fe_getauthname() to be reported better. So revert that and instead
put some real error-reporting code in place. This requires changes to the
APIs of pg_fe_getauthname() and pqGetpwuid(), since the latter had
departed from the POSIX-specified API of getpwuid_r() in a way that made
it impossible to distinguish actual lookup errors from "no such user".
To allow such failures to be reported, while not failing if the caller
supplies a role name, add a second call of pg_fe_getauthname() in
connectOptions2(). This is a tad ugly, and could perhaps be avoided with
some refactoring of PQsetdbLogin(), but I'll leave that idea for later.
(Note that the complained-of misbehavior only occurs in PQsetdbLogin,
not when using the PQconnect functions, because in the latter we will
never bother to call pg_fe_getauthname() if the user gives a role name.)
In passing also clean up the Windows-side usage of GetUserName(): the
recommended buffer size is 257 bytes, the passed buffer length should
be the buffer size not buffer size less 1, and any error is reported
by GetLastError() not errno.
Per report from Christoph Berg. Back-patch to 9.4 where the chroot
failure case was introduced. The generally poor reporting of errors
here is of very long standing, of course, but given the lack of field
complaints about it we won't risk changing these APIs further back
(even though they're theoretically internal to libpq).
Coverity complained that the "else" added to fillPGconn() was unreachable,
which it was. Remove the dead code. In passing, rearrange the tests so as
not to bother trying to fetch values for options that can't be assigned.
Pre-9.3 did not have that issue, but it did have a "return" that should be
"goto oom_error" to ensure that a suitable error message gets filled in.
This reverts commit 9f80f4835a. The
function returned the raw value of a connection parameter, a task served
by PQconninfo(). The next commit will reimplement the psql \conninfo
change that way. Back-patch to 9.4, where that commit first appeared.
If the "dbname" attribute in PQconnectDBParams contained a connection string
or URI (and expand_dbname = TRUE), the database name from the connection
string could not be overridden by a subsequent "dbname" keyword in the
array. That was not intentional; all other options can be overridden.
Furthermore, any subsequent "dbname" caused the connection string from the
first dbname value to be processed again, overriding any values for the same
options that were given between the connection string and the second dbname
option.
In the passing, clarify in the docs that only the first dbname option in the
array is parsed as a connection string.
Alex Shulgin. Backpatch to all supported versions.
An out-of-memory in most of these would lead to strange behavior, like
connecting to a different database than intended, but some would lead to
an outright segfault.
Alex Shulgin and me. Backpatch to all supported versions.
If you call PQreset() repeatedly, and the connection cannot be
re-established, the error messages from the failed connection attempts
kept accumulating in the error string.
Fixes bug #11455 reported by Caleb Epstein. Backpatch to all supported
versions.
The EOF-detection logic in pqReadData was a bit confused about who should
set up the error message in case the kernel gives us read-ready-but-no-data
rather than ECONNRESET or some other explicit error condition. Since the
whole point of this situation is that the lower-level functions don't know
there's anything wrong, pqReadData itself must set up the message. But
keep the assumption that if an errno was reported, a message was set up at
lower levels.
Per bug #11712 from Marko Tiikkaja. It's been like this for a very long
time, so back-patch to all supported branches.
This improves consistency with the MSVC build. On buildfarm member
narwhal, since commit 846e91e022,
shfolder.dll:SHGetFolderPath() crashes when dblink calls it by way of
pqGetHomeDirectory(). Back-patch to 9.4, where that commit first
appeared. How it caused this regression remains a mystery. This is a
partial revert of commit 889f038129, which
adopted shfolder.dll for Windows NT 4.0 compatibility. PostgreSQL 8.2
dropped support for that operating system.
The RFCs say that the CN must not be checked if a subjectAltName extension
of type dNSName is present. IOW, if subjectAltName extension is present,
but there are no dNSNames, we can still check the CN.
Alexey Klyukin
This patch makes libpq check the server's hostname against DNS names listed
in the X509 subjectAltName extension field in the server certificate. This
allows the same certificate to be used for multiple domain names. If there
are no SANs in the certificate, the Common Name field is used, like before
this patch. If both are given, the Common Name is ignored. That is a bit
surprising, but that's the behavior mandated by the relevant RFCs, and it's
also what the common web browsers do.
This also adds a libpq_ngettext helper macro to allow plural messages to be
translated in libpq. Apparently this happened to be the first plural message
in libpq, so it was not needed before.
Alexey Klyukin, with some kibitzing by me.
Programs need execute permission on a DLL file to load it. MSYS
"install" ignores the mode argument, and our Cygwin build statically
links libpq into programs. That explains the lack of buildfarm trouble.
Back-patch to 9.0 (all supported versions).
This refactoring is in preparation for adding support for other SSL
implementations, with no user-visible effects. There are now two #defines,
USE_OPENSSL which is defined when building with OpenSSL, and USE_SSL which
is defined when building with any SSL implementation. Currently, OpenSSL is
the only implementation so the two #defines go together, but USE_SSL is
supposed to be used for implementation-independent code.
The libpq SSL code is changed to use a custom BIO, which does all the raw
I/O, like we've been doing in the backend for a long time. That makes it
possible to use MSG_NOSIGNAL to block SIGPIPE when using SSL, which avoids
a couple of syscall for each send(). Probably doesn't make much performance
difference in practice - the SSL encryption is expensive enough to mask the
effect - but it was a natural result of this refactoring.
Based on a patch by Martijn van Oosterhout from 2006. Briefly reviewed by
Alvaro Herrera, Andreas Karlsson, Jeff Janes.
Based on the old comment, it took me a while to figure out what the
problem was. The importnat detail is that SSL_read() can return WANT_READ
even though some raw data was received from the socket.
ws2_32 is the new version of the library that should be used, as
it contains the require functionality from wsock32 as well as some
more (which is why some binaries were already using ws2_32).
Michael Paquier, reviewed by MauMau
