When converting source files, pg_regress' inputdir and outputdir options were
ignored when computing the locations of the destination files. In consequence,
these options were effectively unusable when the regression inputs need to
be adjusted by pg_regress. This patch makes pg_regress put the converted files
in the same place that these options specify non-converted input or results
files are to be found. Backpatched to all live branches.
When a foreign-key constraint references another column of the same table,
row updates will queue both the PK's ON UPDATE action and the FK's CHECK
action in the same event. The ON UPDATE action must execute first, else
the CHECK will check a non-final state of the row and possibly throw an
inappropriate error, as seen in bug #6268 from Roman Lytovchenko.
Now, the firing order of multiple triggers for the same event is determined
by the sort order of their pg_trigger.tgnames, and the auto-generated names
we use for FK triggers are "RI_ConstraintTrigger_NNNN" where NNNN is the
trigger OID. So most of the time the firing order is the same as creation
order, and so rearranging the creation order fixes it.
This patch will fail to fix the problem if the OID counter wraps around or
adds a decimal digit (eg, from 99999 to 100000) while we are creating the
triggers for an FK constraint. Given the small odds of that, and the low
usage of self-referential FKs, we'll live with that solution in the back
branches. A better fix is to change the auto-generated names for FK
triggers, but it seems unwise to do that in stable branches because there
may be client code that depends on the naming convention. We'll fix it
that way in HEAD in a separate patch.
Back-patch to all supported branches, since this bug has existed for a long
time.
Trailing-zero stripping applied by the FM specifier could strip zeroes
to the left of the decimal point, for a format with no digit positions
after the decimal point (such as "FM999.").
Reported and diagnosed by Marti Raudsepp, though I didn't use his patch.
Apparently there is no buildfarm critter exercising this case after all,
because it fails in several places. With this patch, build, install,
check-world, and installcheck-world pass for me on OS X.
Eventually we might be able to allow that, but it's not clear how many
places need to be fixed to prevent infinite recursion when there's a direct
or indirect inclusion of a rowtype in itself. One such place is
CheckAttributeType(), which will recurse to stack overflow in cases such as
those exhibited in bug #5950 from Alex Perepelica. If we were sure it was
the only such place, we could easily modify the code added by this patch to
stop the recursion without a complaint ... but it probably isn't the only
such place. Hence, throw error until such time as someone is excited
enough about this type of usage to put work into making it safe.
Back-patch as far as 8.3. 8.2 doesn't have the recursive call in
CheckAttributeType in the first place, so I see no need to add code there
in the absence of clear evidence of a problem elsewhere.
This has been broken for years, and I'm not sure why it has not been
noticed before, but now a very modern Cygwin breaks on it, and the fix
is clearly correct. Backpatching to all live branches.
There were corner cases in which the planner would attempt to inline such
a function, which would result in a failure at runtime due to loss of
information about exactly what the result record type is. Fix by disabling
inlining when the function's recorded result type is RECORD. There might
be some sub-cases where inlining could still be allowed, but this is a
simple and backpatchable fix, so leave refinements for another day.
Per bug #5777 from Nate Carson.
Back-patch to all supported branches. 8.1 happens to avoid a core-dump
here, but it still does the wrong thing.
Some buildfarm members fail the test with the original depth of 10 levels,
apparently because they are running at the minimum max_stack_depth setting
of 100kB and using ~ 10k per recursion level. While it might be
interesting to try to figure out why they're eating so much stack, it isn't
likely that any fix for that would be back-patchable. So just change the
test to recurse only 5 levels. The extra levels don't prove anything
correctness-wise anyway.
In general, expression execution state trees aren't re-entrantly usable,
since functions can store private state information in them.
For efficiency reasons, plpgsql tries to cache and reuse state trees for
"simple" expressions. It can get away with that most of the time, but it
can fail if the state tree is dirty from a previous failed execution (as
in an example from Alvaro) or is being used recursively (as noted by me).
Fix by tracking whether a state tree is in use, and falling back to the
"non-simple" code path if so. This results in a pretty considerable speed
hit when the non-simple path is taken, but the available alternatives seem
even more unpleasant because they add overhead in the simple path. Per
idea from Heikki.
Back-patch to all supported branches.
expressions. We need to deal with this when handling subscripts in an array
assignment, and also when catching an exception. In an Assert-enabled build
these omissions led to Assert failures, but I think in a normal build the
only consequence would be short-term memory leakage; which may explain why
this wasn't reported from the field long ago.
Back-patch to all supported versions. 7.4 doesn't have exceptions, but
otherwise these bugs go all the way back.
Heikki Linnakangas and Tom Lane
a pass-by-reference datatype with a nontrivial projection step.
We were using the same memory context for the projection operation as for
the temporary context used by the hashtable routines in execGrouping.c.
However, the hashtable routines feel free to reset their temp context at
any time, which'd lead to destroying input data that was still needed.
Report and diagnosis by Tao Ma.
Back-patch to 8.1, where the problem was introduced by the changes that
allowed us to work with "virtual" tuples instead of materializing intermediate
tuple values everywhere. The earlier code looks quite similar, but it doesn't
suffer the problem because the data gets copied into another context as a
result of having to materialize ExecProject's output tuple.
sub-select contains a join alias reference that expands into an expression
containing another sub-select. Per yesterday's report from Merlin Moncure
and subsequent off-list investigation.
Back-patch to 7.4. Older versions didn't attempt to flatten sub-selects in
ways that would trigger this problem.
for sure ;-)). It now also optimizes more cases, such as %_%_. Improve
comments too. Per bug #5478.
In passing, also rename the TCHAR macro to GETCHAR, because pgindent is
messing with the formatting of the former (apparently it now thinks TCHAR
is a typedef name).
Back-patch to 8.3, where the bug was introduced.
being assigned to, in case the expression to be assigned is a FieldStore that
would need to modify that value. The need for this was foreseen some time
ago, but not implemented then because we did not have arrays of composites.
Now we do, but the point evidently got overlooked in that patch. Net result
is that updating a field of an array element doesn't work right, as
illustrated if you try the new regression test on an unpatched backend.
Noted while experimenting with EXPLAIN VERBOSE, which has also got some issues
in this area.
Backpatch to 8.3, where arrays of composites were introduced.
The original coding correctly noted that these aren't just redundancies
(they're effectively X IS NOT NULL, assuming = is strict). However, they
got treated that way if X happened to be in a single-member EquivalenceClass
already, which could happen if there was an ORDER BY X clause, for instance.
The simplest and most reliable solution seems to be to not try to process
such clauses through the EquivalenceClass machinery; just throw them back
for traditional processing. The amount of work that'd be needed to be
smarter than that seems out of proportion to the benefit.
Per bug #5084 from Bernt Marius Johnsen, and analysis by Andrew Gierth.
that the sanity checking I added to create_mergejoin_plan() in 8.3 was a
few bricks shy of a load: the mergeclauses could reference pathkeys in a
noncanonical order such as x,y,x, not only cases like x,x,y which is all
that the code had allowed for. The odd cases only turn up when using
redundant clauses in an outer join condition, which is why no one had
noticed before.
This prevents autovacuum from reclaiming free space in them and causing
the test's output row order to change, which is causing intermittent
bogus failure reports in the buildfarm.
Backpatch to 8.3. The issue exists further back, but since autovacuum was
not on by default before 8.3, it's not a problem for buildfarm testing.
this case is worth a special code path, but a special code path that gets
the boundary condition wrong is definitely no good. Per bug #4821 from
Andrew Gierth.
In passing, clean up some minor code formatting issues (excess parentheses
and blank lines in odd places).
Back-patch to 8.3, where the bug was introduced.
aggregate function. By definition, such a sub-SELECT cannot reference any
variables of query levels between itself and the aggregate's semantic level
(else the aggregate would've been assigned to that lower level instead).
So the correct, most efficient implementation is to treat the sub-SELECT as
being a sub-select of that outer query level, not the level the aggregate
syntactically appears in. Not doing so also confuses the heck out of our
parameter-passing logic, as illustrated in bug report from Daniel Grace.
Fortunately, we were already copying the whole Aggref expression up to the
outer query level, so all that's needed is to delay SS_process_sublinks
processing of the sub-SELECT until control returns to the outer level.
This has been broken since we introduced spec-compliant treatment of
outer aggregates in 7.4; so patch all the way back.
interval_eq() considers equal. I'm not sure how that fundamental requirement
escaped us through multiple revisions of this hash function, but there it is;
it's been wrong since interval_hash was first written for PG 7.1.
Per bug #4748 from Roman Kononov.
Backpatch to all supported releases.
This patch changes the contents of hash indexes for interval columns. That's
no particular problem for PG 8.4, since we've broken on-disk compatibility
of hash indexes already; but it will require a migration warning note in
the next minor releases of all existing branches: "if you have any hash
indexes on columns of type interval, REINDEX them after updating".
TupleTableSlots. We have functions for retrieving a minimal tuple from a slot
after storing a regular tuple in it, or vice versa; but these were implemented
by converting the internal storage from one format to the other. The problem
with that is it invalidates any pass-by-reference Datums that were already
fetched from the slot, since they'll be pointing into the just-freed version
of the tuple. The known problem cases involve fetching both a whole-row
variable and a pass-by-reference value from a slot that is fed from a
tuplestore or tuplesort object. The added regression tests illustrate some
simple cases, but there may be other failure scenarios traceable to the same
bug. Note that the added tests probably only fail on unpatched code if it's
built with --enable-cassert; otherwise the bug leads to fetching from freed
memory, which will not have been overwritten without additional conditions.
Fix by allowing a slot to contain both formats simultaneously; which turns out
not to complicate the logic much at all, if anything it seems less contorted
than before.
Back-patch to 8.2, where minimal tuples were introduced.
by the planning process. This prevents the "failed to locate grouping columns"
error recently reported by Dickson Guedes. That happens because planning
replaces SubLinks by SubPlans in the subquery's targetlist, and exprTypmod()
is smarter about the former than the latter, causing the apparent type of
the subquery's output columns to change. This seems to be a deficiency we
should fix in exprTypmod(), but that will be a much more invasive patch
with possible side-effects elsewhere, so I'll do that only in HEAD.
Back-patch to 8.3. Arguably the lack of a copying step is broken/dangerous
all the way back, but in the absence of known problems I'll refrain from
making the older branches pay the extra cost. (The reason this particular
symptom didn't appear before is that exprTypmod() wasn't smart about SubLinks
either, until 8.3.)
The proposed fix for this is a behavioral change that probably shouldn't
get back-patched, and it doesn't seem worth putting a workaround into
a back branch.
actual argument type of ANYARRAY to match an argument declared ANYARRAY,
so long as ANYELEMENT etc aren't used. I had overlooked the fact that this
is a possible case while fixing bug #3852; but it is possible because
pg_statistic contains columns declared ANYARRAY. Per gripe from Corey Horton.
read when the --temp-config argument is bad. Noted while wondering why
buildfarm member dungbeetle is failing ... this isn't why, but it is why
the error report isn't very helpful ...
bug #4290. The fundamental bug is that masking extParam by outer_params,
as finalize_plan had been doing, caused us to lose the information that
an initPlan depended on the output of a sibling initPlan. On reflection
the best thing to do seemed to be not to try to adjust outer_params for
this case but get rid of it entirely. The only thing it was really doing
for us was to filter out param IDs associated with SubPlan nodes, and that
can be done (with greater accuracy) while processing individual SubPlan
nodes in finalize_primnode. This approach was vindicated by the discovery
that the masking method was hiding a second bug: SS_finalize_plan failed to
remove extParam bits for initPlan output params that were referenced in the
main plan tree (it only got rid of those referenced by other initPlans).
It's not clear that this caused any real problems, given the limited use
of extParam by the executor, but it's certainly not what was intended.
I originally thought that there was also a problem with needing to include
indirect dependencies on external params in initPlans' param sets, but it
turns out that the executor handles this correctly so long as the depended-on
initPlan is earlier in the initPlans list than the one using its output.
That seems a bit of a fragile assumption, but it is true at the moment,
so I just documented it in some code comments rather than making what would
be rather invasive changes to remove the assumption.
Back-patch to 8.1. Previous versions don't have the case of initPlans
referring to other initPlans' outputs, so while the existing logic is still
questionable for them, there are not any known bugs to be fixed. So I'll
refrain from changing them for now.
of any lower outer join, even if it also references the non-nullable side and
so could not get pushed below the outer join anyway. We need this in case
the clause is an OR clause: if it doesn't get marked outerjoin_delayed,
create_or_index_quals() could pull an indexable restriction for the nullable
side out of it, leading to wrong results as demonstrated by today's bug
report from toruvinn. (See added regression test case for an example.)
In principle this has been wrong for quite a while. In practice I don't
think any branch before 8.3 can really show the failure, because
create_or_index_quals() will only pull out indexable conditions, and before
8.3 those were always strict. So though we might have improperly generated
null-extended rows in the outer join, they'd get discarded from the result
anyway. The gating factor that makes the failure visible is that 8.3
considers "col IS NULL" to be indexable. Hence I'm not going to risk
back-patching further than 8.3.
rather than "\x09". Before 8.3 we just printed tabs as-is, leading to poor
formatting of subsequent columns, but consensus is that "\x09" is not an
improvement over that. Back-patch of fix that's already in HEAD.
cases. Recent buildfarm experience shows that it is sometimes possible
to execute several SQL commands in less time than the granularity of
Windows' not-very-high-resolution gettimeofday(), leading to a failure
because the tests expect the value of now() to change and it doesn't.
Also, it was recognized some time ago that the same area of the tests
could fail if local midnight passes between the insertion and the checking
of the values for 'yesterday', 'tomorrow', etc. Clean all this up per
ideas from myself and Greg Stark.
There remains a window for failure if the transaction block is entered
exactly at local midnight (so that 'now' and 'today' have the same value),
but that seems low-probability enough to live with.
Since the point of this change is mostly to eliminate buildfarm noise,
back-patch to all versions we are still actively testing.
checked to see if it's been initialized to all non-nulls. The implicit NOT
NULL constraint was not being checked during the ALTER (in fact, not even if
there was an explicit NOT NULL too), because ATExecAddColumn neglected to
set the flag needed to make the test happen. This has been broken since
the capability was first added, in 8.0.
Brendan Jurd, per a report from Kaloyan Iliev.
output is not of the same type that's needed for the IN comparison (ie,
where the parser inserted an implicit coercion above the subselect result).
We should record the coerced expression, not just a raw Var referencing
the subselect output, as the quantity that needs to be unique-ified if
we choose to implement the IN as Unique followed by a plain join.
As of 8.3 this error was causing crashes, as seen in bug #4113 from Javier
Hernandez, because the executor was being told to hash or sort the raw
subselect output column using operators appropriate to the coerced type.
In prior versions there was no crash because the executor chose the
hash or sort operators for itself based on the column type it saw.
However, that's still not really right, because what's unique for one data
type might not be unique for another. In corner cases we could get multiple
outputs of a row that should appear only once, as demonstrated by the
regression test case included in this commit.
However, this patch doesn't apply cleanly to 8.2 or before, and the code
involved has shifted enough over time that I'm hesitant to try to back-patch.
Given the lack of complaints from the field about such corner cases, I think
the bug may not be important enough to risk breaking other things with a
back-patch.
The places that did, eg,
(statbuf.st_mode & S_IFMT) == S_IFDIR
were correct, but there is no good reason not to use S_ISDIR() instead,
especially when that's what the other 90% of our code does. The places
that did, eg,
(statbuf.st_mode & S_IFDIR)
were flat out *wrong* and would fail in various platform-specific ways,
eg a symlink could be mistaken for a regular file on most Unixen.
The actual impact of this is probably small, since the problem cases
seem to always involve symlinks or sockets, which are unlikely to be
found in the directories that PG code might be scanning. But it's
clearly trouble waiting to happen, so patch all the way back anyway.
(There seem to be no occurrences of the mistake in 7.4.)
On other platforms it's better to let the Makefile handle it, but we want
the regression tests to be invokable without make on Windows. A batch
file would be a better solution, but no time for that before 8.3.
Per my discovery that this breaks testing under SELinux, and subsequent
discussion.
checking of argument compatibility right; although the problem is only exposed
with multiple-input aggregates in which some arguments are polymorphic and
some are not. Per bug #3852 from Sokolov Yura.
of poorer planning in 8.3 than 8.2:
1. After pushing a constant across an outer join --- ie, given
"a LEFT JOIN b ON (a.x = b.y) WHERE a.x = 42", we can deduce that b.y is
sort of equal to 42, in the sense that we needn't fetch any b rows where
it isn't 42 --- loop to see if any additional deductions can be made.
Previous releases did that by recursing, but I had mistakenly thought that
this was no longer necessary given the EquivalenceClass machinery.
2. Allow pushing constants across outer join conditions even if the
condition is outerjoin_delayed due to a lower outer join. This is safe
as long as the condition is strict and we re-test it at the upper join.
3. Keep the outer-join clause even if we successfully push a constant
across it. This is *necessary* in the outerjoin_delayed case, but
even in the simple case, it seems better to do this to ensure that the
join search order heuristics will consider the join as reasonable to
make. Mark such a clause as having selectivity 1.0, though, since it's
not going to eliminate very many rows after application of the constant
condition.
4. Tweak have_relevant_eclass_joinclause to report that two relations
are joinable when they have vars that are equated to the same constant.
We won't actually generate any joinclause from such an EquivalenceClass,
but again it seems that in such a case it's a good idea to consider
the join as worth costing out.
5. Fix a bug in select_mergejoin_clauses that was exposed by these
changes: we have to reject candidate mergejoin clauses if either side was
equated to a constant, because we can't construct a canonical pathkey list
for such a clause. This is an implementation restriction that might be
worth fixing someday, but it doesn't seem critical to get it done for 8.3.
constraint status of copied indexes (bug #3774), as well as various other
small bugs such as failure to pstrdup when needed. Allow INCLUDING INDEXES
indexes to be merged with identical declared indexes (perhaps not real useful,
but the code is there and having it not apply to LIKE indexes seems pretty
unorthogonal). Avoid useless work in generateClonedIndexStmt(). Undo some
poorly chosen API changes, and put a couple of routines in modules that seem
to be better places for them.
but no database changes have been made since the last CommandCounterIncrement.
This should result in a significant improvement in the number of "commands"
that can typically be performed within a transaction before hitting the 2^32
CommandId size limit. In particular this buys back (and more) the possible
adverse consequences of my previous patch to fix plan caching behavior.
The implementation requires tracking whether the current CommandCounter
value has been "used" to mark any tuples. CommandCounter values stored into
snapshots are presumed not to be used for this purpose. This requires some
small executor changes, since the executor used to conflate the curcid of
the snapshot it was using with the command ID to mark output tuples with.
Separating these concepts allows some small simplifications in executor APIs.
Something for the TODO list: look into having CommandCounterIncrement not do
AcceptInvalidationMessages. It seems fairly bogus to be doing it there,
but exactly where to do it instead isn't clear, and I'm disinclined to mess
with asynchronous behavior during late beta.
plan before the effects of DDL executed in an immediately prior SPI operation
had been absorbed. Per report from Chris Wood.
This patch has an unpleasant side effect of causing the number of
CommandCounterIncrement()s done by a typical plpgsql function to
approximately double. Amelioration of the consequences of that
will be undertaken in a separate patch.
to a UNION, CASE, or related construct are of the same domain type. The
main part of this routine smashes domains to their base types, which seems
necessary because the logic involves TypeCategory() and IsPreferredType(),
neither of which work usefully on domains. However, we can add a first
pass that just detects whether all the inputs are exactly the same type,
and if so accept that without question (so long as it's not UNKNOWN).
Per recent gripe from Dean Rasheed.
In passing, remove some tests for InvalidOid, which have clearly been dead
code for quite some time now, because getBaseType() would fail on that input.
Also, clarify the manual's not-very-precise description of the existing
algorithm's behavior.
