The "date" type supports a wider range of dates than int64 timestamps do.
However, there is pre-int64-timestamp code in the planner that assumes that
all date values can be converted to timestamp with impunity. Fortunately,
what we really need out of the conversion is always a double (float8)
value; so even when the date is out of timestamp's range it's possible to
produce a sane answer. All we need is a code path that doesn't try to
force the result into int64. Per trouble report from David Rericha.
Back-patch to all supported versions. Although this is surely a corner
case, there's not much point in advertising a date range wider than
timestamp's if we will choke on such values in unexpected places.
eval_const_expressions() can replace CaseTestExprs with constants when
the surrounding CASE's test expression is a constant. This confuses
ruleutils.c's heuristic for deparsing simple-form CASEs, leading to
Assert failures or "unexpected CASE WHEN clause" errors. I had put in
a hack solution for that years ago (see commit
514ce7a331 of 2006-10-01), but bug #5794
from Peter Speck shows that that solution failed to cover all cases.
Fortunately, there's a much better way, which came to me upon reflecting
that Peter's "CASE TRUE WHEN" seemed pretty redundant: we can "simplify"
the simple-form CASE to the general form of CASE, by simply omitting the
constant test expression from the rebuilt CASE construct. This is
intuitively valid because there is no need for the executor to evaluate
the test expression at runtime; it will never be referenced, because any
CaseTestExprs that would have referenced it are now replaced by constants.
This won't save a whole lot of cycles, since evaluating a Const is pretty
cheap, but a cycle saved is a cycle earned. In any case it beats kluging
ruleutils.c still further. So this patch improves const-simplification
and reverts the previous change in ruleutils.c.
Back-patch to all supported branches. The bug exists in 8.1 too, but it's
out of warranty.
After parsing a parenthesized subexpression, we must pop all pending
ANDs and NOTs off the stack, just like the case for a simple operand.
Per bug #5793.
Also fix clones of this routine in contrib/intarray and contrib/ltree,
where input of types query_int and ltxtquery had the same problem.
Back-patch to all supported versions.
We don't actually need optreset, because we can easily fix the code to
ensure that it's cleanly restartable after having completed a scan over the
argv array; which is the only case we need to restart in. Getting rid of
it avoids a class of interactions with the system libraries and allows
reversion of my change of yesterday in postmaster.c and postgres.c.
Back-patch to 8.4. Before that the getopt code was a bit different anyway.
The mingw people don't appear to care about compatibility with non-GNU
versions of getopt, so force use of our own copy of getopt on Windows.
Also, ensure that we make use of optreset when using our own copy.
Per report from Andrew Dunstan. Back-patch to all versions supported
on Windows.
The original coding in tuplestore_trim() was only meant to work efficiently
in cases where each trim call deleted most of the tuples in the store.
Which, in fact, was the pattern of the original usage with a Material node
supporting mark/restore operations underneath a MergeJoin. However,
WindowAgg now uses tuplestores and it has considerably less friendly
trimming behavior. In particular it can attempt to trim one tuple at a
time off a large tuplestore. tuplestore_trim() had O(N^2) runtime in this
situation because of repeatedly shifting its tuple pointer array. Fix by
avoiding shifting the array until a reasonably large number of tuples have
been deleted. This can waste some pointer space, but we do still reclaim
the tuples themselves, so the percentage wastage should be pretty small.
Per Jie Li's report of slow percent_rank() evaluation. cume_dist() and
ntile() would certainly be affected as well, along with any other window
function that has a moving frame start and requires reading substantially
ahead of the current row.
Back-patch to 8.4, where window functions were introduced. There's no
need to tweak it before that.
Recent versions of the Linux system header files cause xlogdefs.h to
believe that open_datasync should be the default sync method, whereas
formerly fdatasync was the default on Linux. open_datasync is a bad
choice, first because it doesn't actually outperform fdatasync (in fact
the reverse), and second because we try to use O_DIRECT with it, causing
failures on certain filesystems (e.g., ext4 with data=journal option).
This part of the patch is largely per a proposal from Marti Raudsepp.
More extensive changes are likely to follow in HEAD, but this is as much
change as we want to back-patch.
Also clean up confusing code and incorrect documentation surrounding the
fsync_writethrough option. Those changes shouldn't result in any actual
behavioral change, but I chose to back-patch them anyway to keep the
branches looking similar in this area.
In 9.0 and HEAD, also do some copy-editing on the WAL Reliability
documentation section.
Back-patch to all supported branches, since any of them might get used
on modern Linux versions.
There are some code paths, such as SPI_execute(), where we invoke
copyObject() on raw parse trees before doing parse analysis on them. Since
the bison grammar is capable of building heavily nested parsetrees while
itself using only minimal stack depth, this means that copyObject() can be
the front-line function that hits stack overflow before anything else does.
Accordingly, it had better have a check_stack_depth() call. I did a bit of
performance testing and found that this slows down copyObject() by only a
few percent, so the hit ought to be negligible in the context of complete
processing of a query.
Per off-list report from Toshihide Katayama. Back-patch to all supported
branches.
There were corner cases in which the planner would attempt to inline such
a function, which would result in a failure at runtime due to loss of
information about exactly what the result record type is. Fix by disabling
inlining when the function's recorded result type is RECORD. There might
be some sub-cases where inlining could still be allowed, but this is a
simple and backpatchable fix, so leave refinements for another day.
Per bug #5777 from Nate Carson.
Back-patch to all supported branches. 8.1 happens to avoid a core-dump
here, but it still does the wrong thing.
When using default autovacuum_vac_cost_limit, autovac_balance_cost relied
on VacuumCostLimit to contain the correct global value ... but after the
first time through in a particular worker process, it didn't, because we'd
trashed it in previous iterations. Depending on the state of other autovac
workers, this could result in a steady reduction of the effective
cost_limit setting as a particular worker processed more and more tables,
causing it to go slower and slower. Spotted by Simon Poole (bug #5759).
Fix by saving and restoring the GUC variables in the loop in do_autovacuum.
In passing, improve a few comments.
Back-patch to 8.3 ... the cost rebalancing code has been buggy since it was
put in.
temporary indexes are not WAL-logged. We used a constant LSN for temporary
indexes, on the assumption that we don't need to worry about concurrent page
splits in temporary indexes because they're only visible to the current
session. But that assumption is wrong, it's possible to insert rows and
split pages in the same session, while a scan is in progress. For example,
by opening a cursor and fetching some rows, and INSERTing new rows before
fetching some more.
Fix by generating fake increasing LSNs, used in place of real LSNs in
temporary GiST indexes.
We must stay in the function's SPI context until done calling the iterator
that returns the set result. Otherwise, any attempt to invoke SPI features
in the python code called by the iterator will malfunction. Diagnosis and
patch by Jan Urbanski, per bug report from Jean-Baptiste Quenot.
Back-patch to 8.2; there was no support for SRFs in previous versions of
plpython.
We must not return any "okay to proceed" result code without having checked
for too many children, else we might fail later on when trying to add the
new child to one of the per-child state arrays. It's not clear whether
this oversight explains Stefan Kaltenbrunner's recent report, but it could
certainly produce a similar symptom.
Back-patch to 8.4; the logic was not broken before that.
This is needed to support debug_print_parse, per report from Jon Nelson.
Cursory testing via the regression tests suggests we aren't missing
anything else.
Once we have found a non-null constant argument, there is no need to
examine additional arguments of the COALESCE. The previous coding got it
right only if the constant was in the first argument position; otherwise
it tried to simplify following arguments too, leading to unexpected
behavior like this:
regression=# select coalesce(f1, 42, 1/0) from int4_tbl;
ERROR: division by zero
It's a minor corner case, but a bug is a bug, so back-patch all the way.
location read from backup label file can be found: wasShutdown was set
incorrectly when a backup label file was found.
Jeff Davis, with a little tweaking by me.
This code was just plain wrong: what you got was not a line through the
given point but a line almost indistinguishable from the Y-axis, although
not truly vertical. The only caller that tries to use this function with
m == DBL_MAX is dist_ps_internal for the case where the lseg is horizontal;
it would end up producing the distance from the given point to the place
where the lseg's line crosses the Y-axis. That function is used by other
operators too, so there are several operators that could compute wrong
distances from a line segment to something else. Per bug #5745 from
jindiax.
Back-patch to all supported branches.
The general design of memory management in Postgres is that intermediate
results computed by an expression are not freed until the end of the tuple
cycle. For expression indexes, ANALYZE has to re-evaluate each expression
for each of its sample rows, and it wasn't bothering to free intermediate
results until the end of processing of that index. This could lead to very
substantial leakage if the intermediate results were large, as in a recent
example from Jakub Ouhrabka. Fix by doing ResetExprContext for each sample
row. This necessitates adding a datumCopy step to ensure that the final
expression value isn't recycled too. Some quick testing suggests that this
change adds at worst about 10% to the time needed to analyze a table with
an expression index; which is annoying, but seems a tolerable price to pay
to avoid unexpected out-of-memory problems.
Back-patch to all supported branches.
length stored in the line pointer the same way it's calculated in the normal
heap_insert() codepath. As noted by Jeff Davis, the length stored by
raw_heap_insert() included padding but the one stored by the normal codepath
did not. While the mismatch seems to be harmless, inconsistency isn't good,
and the normal codepath has received a lot more testing over the years.
Backpatch to 8.3 where the heap rewrite code was introduced.
The original coding in FileClose() reset the file-is-temp flag before
unlinking the file, so that if control came back through due to an error,
it wouldn't try to unlink the file twice. This was correct when written,
but when the log_temp_files feature was added, the logging action was put
in between those two steps. An error occurring during the logging action
--- such as a query cancel --- would result in the unlink not getting done
at all, as in recent report from Michael Glaesemann.
To fix this, make sure that we do both the stat and the unlink before doing
anything that could conceivably CHECK_FOR_INTERRUPTS. There is a judgment
call here, which is which log message to emit first: if you can see only
one, which should it be? I chose to log unlink failure at the risk of
losing the log_temp_files log message --- after all, if the unlink does
fail, the temp file is still there for you to see.
Back-patch to all versions that have log_temp_files. The code was OK
before that.
Per recent investigation, the register stack can grow faster than the
regular stack depending on compiler and choice of options. To avoid
crashes we must check both stacks in check_stack_depth().
Back-patch to all supported versions.
Some buildfarm members fail the test with the original depth of 10 levels,
apparently because they are running at the minimum max_stack_depth setting
of 100kB and using ~ 10k per recursion level. While it might be
interesting to try to figure out why they're eating so much stack, it isn't
likely that any fix for that would be back-patchable. So just change the
test to recurse only 5 levels. The extra levels don't prove anything
correctness-wise anyway.
It was reporting that these were fully indexed (hence cheap), when of
course they're the exact opposite of that. I'm not certain if the case
would arise in practice, since a clauseless semijoin is hard to produce
in SQL, but if it did happen we'd make some dumb decisions.
We failed to record any dependency on the underlying table for an index
declared like "create index i on t (foo(t.*))". This would create trouble
if the table were dropped without previously dropping the index. To fix,
simplify some overly-cute code in index_create(), accepting the possibility
that sometimes the whole-table dependency will be redundant. Also document
this hazard in dependency.c. Per report from Kevin Grittner.
In passing, prevent a core dump in pg_get_indexdef() if the index's table
can't be found. I came across this while experimenting with Kevin's
example. Not sure it's a real issue when the catalogs aren't corrupt, but
might as well be cautious.
Back-patch to all supported versions.
In general, expression execution state trees aren't re-entrantly usable,
since functions can store private state information in them.
For efficiency reasons, plpgsql tries to cache and reuse state trees for
"simple" expressions. It can get away with that most of the time, but it
can fail if the state tree is dirty from a previous failed execution (as
in an example from Alvaro) or is being used recursively (as noted by me).
Fix by tracking whether a state tree is in use, and falling back to the
"non-simple" code path if so. This results in a pretty considerable speed
hit when the non-simple path is taken, but the available alternatives seem
even more unpleasant because they add overhead in the simple path. Per
idea from Heikki.
Back-patch to all supported branches.
that WAL file containing the checkpoint redo-location can be found. This
avoids making the cluster irrecoverable if the redo location is in an earlie
WAL file than the checkpoint record.
Report, analysis and patch by Jeff Davis, with small changes by me.
The trick is to not try to build executables directly from .c files,
but to always build the intermediate .o files. For obscure reasons,
Darwin's version of gcc will leave debug cruft behind in the first
case but not the second. Per complaint from Robert Haas.
The original coding was quite sloppy about handling the case where
XLogReadBuffer fails (because the page has since been deleted). This
would result in either "bad buffer id: 0" or an Assert failure during
replay, if indeed the page were no longer there. In a couple of places
it also neglected to check whether the change had already been applied,
which would probably result in corrupted index contents. I believe that
bug #5703 is an instance of the first problem. These issues could show up
without replication, but only if you were unfortunate enough to crash
between modification of a GIN index and the next checkpoint.
Back-patch to 8.2, which is as far back as GIN has WAL support.
In versions 8.2 and up, the grammar allows attaching ORDER BY, LIMIT,
FOR UPDATE, or WITH to VALUES, and hence to INSERT ... VALUES. But the
special-case code for VALUES in transformInsertStmt() wasn't expecting any
of those, and just ignored them, leading to unexpected results. Rather
than complicate the special-case path, just ensure that the presence of any
of those clauses makes us treat the query as if it had a general SELECT.
Per report from Hitoshi Harada.
There are numerous methods by which a Perl or Tcl function can subvert
the behavior of another such function executed later; for example, by
redefining standard functions or operators called by the target function.
If the target function is SECURITY DEFINER, or is called by such a
function, this means that any ordinary SQL user with Perl or Tcl language
usage rights can do essentially anything with the privileges of the target
function's owner.
To close this security hole, create a separate Perl or Tcl interpreter for
each SQL userid under which plperl or pltcl functions are executed within
a session. However, all plperlu or pltclu functions run within a session
still share a single interpreter, since they all execute at the trust
level of a database superuser anyway.
Note: this change results in a functionality loss when libperl has been
built without the "multiplicity" option: it's no longer possible to call
plperl functions under different userids in one session, since such a
libperl can't support multiple interpreters in one process. However, such
a libperl already failed to support concurrent use of plperl and plperlu,
so it's likely that few people use such versions with Postgres.
Security: CVE-2010-3433
The point of a PlaceHolderVar is to allow a non-strict expression to be
evaluated below an outer join, after which its value bubbles up like a Var
and can be forced to NULL when the outer join's semantics require that.
However, there was a serious design oversight in that, namely that we
didn't ensure that there was actually a correct place in the plan tree
to evaluate the placeholder :-(. It may be necessary to delay evaluation
of an outer join to ensure that a placeholder that should be evaluated
below the join can be evaluated there. Per recent bug report from Kirill
Simonov.
Back-patch to 8.4 where the PlaceHolderVar mechanism was introduced.
It now emerges that the JDBC driver expects to be able to use pg_get_expr()
on an output of a sub-SELECT. So extend the check logic to be able to recurse
into a sub-SELECT to see if the argument is ultimately coming from an
appropriate column. Per report from Thomas Kellerer.
hasn't been set.
The only known case where this can happen is when show_session_authorization
is invoked in an autovacuum process, which is possible if an index function
calls it, as for example in bug #5669 from Andrew Geery. We could perhaps
try to return a sensible value, such as the name of the cluster-owning
superuser; but that seems like much more trouble than the case is worth,
and in any case it could create new possible failure modes. Simply
returning an empty string seems like the most appropriate fix.
Back-patch to all supported versions, even those before autovacuum, just
in case there's another way to provoke this crash.
In some situations the original coding led to corrupting the child AppendRel's
subpaths list, effectively adding other members of the parent's list to it.
This was usually masked because we never made any further use of the child's
list, but given the right combination of circumstances, we could do so. The
visible symptom would be a relation getting scanned twice, as in bug #5673
from David Schmitt.
Backpatch to 8.2, which is as far back as the risky coding appears. The
example submitted by David only fails in 8.4 and later, but I'm not convinced
that there aren't any even-more-obscure cases where 8.2 and 8.3 would fail.
servers. AFAICT it's harmless at the moment because nothing can depend on
either, but as soon as we introduce an object type with such dependencies,
tableoid needs to be set or pg_dump will fail to interpret the dependencies
correctly. In theory, I guess the uninitialized garbage in tableoid could
cause the object to be mistaken for some other object with same OID as well.
This was unintentionally broken in 8.4 while tightening up checking of
ordinary non-Julian date inputs to forbid references to "year zero".
Per bug #5672 from Benjamin Gigot.
The previous patches failed to cover a lot of symlinks that are only
added in platform-specific cases. Make the lists match what's in the
Makefile for each branch.
since it can happen when a process fails to start when the system
is under high load.
Per several bug reports and many peoples investigation.
Back-patch to 8.4, which is as far back as the "deadman-switch"
for shared memory access exists.
SI invalidation events, rather than indirectly through the relcache.
In the previous coding, we had to flush a composite-type typcache entry
whenever we discarded the corresponding relcache entry. This caused problems
at least when testing with RELCACHE_FORCE_RELEASE, as shown in recent report
from Jeff Davis, and might result in real-world problems given the kind of
unexpected relcache flush that that test mechanism is intended to model.
The new coding decouples relcache and typcache management, which is a good
thing anyway from a structural perspective. The cost is that we have to
search the typcache linearly to find entries that need to be flushed. There
are a couple of ways we could avoid that, but at the moment it's not clear
it's worth any extra trouble, because the typcache contains very few entries
in typical operation.
Back-patch to 8.2, the same as some other recent fixes in this general area.
The patch could be carried back to 8.0 with some additional work, but given
that it's only hypothetical whether we're fixing any problem observable in
the field, it doesn't seem worth the work now.
This patch changes _bt_split() and _bt_pagedel() to throw a plain ERROR,
rather than PANIC, for several cases that are reported from the field
from time to time:
* right sibling's left-link doesn't match;
* PageAddItem failure during _bt_split();
* parent page's next child isn't right sibling during _bt_pagedel().
In addition the error messages for these cases have been made a bit
more verbose, with additional values included.
The original motivation for PANIC here was to capture core dumps for
subsequent analysis. But with so many users whose platforms don't capture
core dumps by default, or who are unprepared to analyze them anyway, it's hard
to justify a forced database restart when we can fairly easily detect the
problems before we've reached the critical sections where PANIC would be
necessary. It is not currently known whether the reports of these messages
indicate well-hidden bugs in Postgres, or are a result of storage-level
malfeasance; the latter possibility suggests that we ought to try to be more
robust even if there is a bug here that's ultimately found.
Backpatch to 8.2. The code before that is sufficiently different that
it doesn't seem worth the trouble to back-port further.
Egypt and Palestine. Added new names for two Micronesian timezones:
Pacific/Chuuk is now preferred over Pacific/Truk (and the preferred
abbreviation is CHUT not TRUT) and Pacific/Pohnpei is preferred over
Pacific/Ponape. Historical corrections for Finland.
returning "record" actually do have the same rowtype. This is needed because
the parser can't realistically enforce that they will all have the same typmod,
as seen in a recent example from David Wheeler.
Back-patch to 8.0, which is as far back as we have the notion of RECORD
subtypes being distinguished by typmod. Wheeler's example depends on
8.4-and-up features, but I suspect there may be ways to provoke similar
failures before 8.4.
This is reproducibly possible in Python 2.7 if the user turned
PendingDeprecationWarning into an error, but it's theoretically also possible
in earlier versions in case of exceptional conditions.
backpatched to 8.0
The original coding tended to break down in the face of modified restore
orders, as shown in bug #5626 from Albert Ullrich, because it would flip over
into parallel-restore operation too soon. That causes problems because we
don't have sufficient dependency information in dump archives to allow safe
parallel processing of SECTION_PRE_DATA items. Even if we did, it's probably
undesirable to allow that to override the commanded restore order.
To fix the problem of omitted items causing unexpected changes in restore
order, tweak SortTocFromFile so that omitted items end up at the head of
the list not the tail. This ensures that they'll be examined and their
dependencies will be marked satisfied before we get to any interesting
items.
In HEAD and 9.0, we can easily change restore_toc_entries_parallel so that
all SECTION_PRE_DATA items are guaranteed to be processed in the initial
serial-restore loop, and hence in commanded order. Only DATA and POST_DATA
items are candidates for parallel processing. For them there might be
variations from the commanded order because of parallelism, but we should
do it in a safe order thanks to dependencies.
In 8.4 it's much harder to make such a guarantee. I settled for not
letting the initial loop break out into parallel processing mode if
it sees a DATA/POST_DATA item that's not to be restored; this at least
prevents a non-restorable item from causing premature exit from the loop.
This means that 8.4 will be more likely to fail given a badly-ordered -L
list than 9.x, but we don't really promise any such thing will work anyway.
Aside from being more forgiving, this prevents a rather surprising misbehavior
when the "wrong" order was used: the old code didn't throw a syntax error,
but absorbed the INTO clause into the last USING expression, which then did
strange things downstream.
Intentionally not changing the documentation; we'll continue to advertise
only the "standard" clause order.
Backpatch to 8.4, where the USING clause was added to EXECUTE.
It's not clear if this situation can occur in plpgsql other than via the
EXECUTE USING case Heikki illustrated, which I will shortly close off.
However, ignoring the intoClause if it's there is surely wrong, so let's
patch it for safety.
Backpatch to 8.3, which is as far back as this code has a PlannedStmt
to deal with. There might be another way to make an equivalent test
before that, but since this is just preventing hypothetical bugs,
I'm not going to obsess about it.
pointed out, it would need a 2nd pass after the whole query is processed to
correctly check that an unknown Param is coerced to the same target type
everywhere. Adding the 2nd pass would add a lot more code, which doesn't
seem worth the risk given that there isn't much of a use case for passing
unknown Params in the first place. The code would work without that check,
but it might be confusing and the behavior would be different from the
varparams case.
Instead, just coerce all unknown params in a PL/pgSQL USING clause to text.
That's simple, and is usually what users expect.
Revert the patch in CVS HEAD and master, and backpatch the new solution to
8.4. Unlike the previous solution, this applies easily to 8.4 too.
afterTriggerInvokeEvents failed to adjust events->tailfree when truncating
the last chunk of an event list. This could result in the data being
"de-truncated" by afterTriggerRestoreEventList during a subsequent
subtransaction abort. Even that wouldn't kill us, because the re-added data
would just be events marked DONE --- unless the data had been partially
overwritten by new events. Then we might crash, or in any case misbehave
(perhaps fire triggers twice, or fire triggers with the wrong event data).
Per bug #5622 from Thue Janus Kristensen.
Back-patch to 8.4 where the current trigger list representation was introduced.
_outPlannedStmt is only debug support, so the omission there was not very
serious, but the omission in _copyPlannedStmt is a real bug. The consequence
would be that a copied plan tree would never be marked as a transient plan,
so that we would forget we ought to replan it after some not-yet-ready index
becomes ready for use. This might explain some past complaints about indexes
created with CREATE INDEX CONCURRENTLY not being used right away. Problem
spotted by Yeb Havinga.
Back-patch to 8.3, where the field was added.
socket lockfile) when writing them. The lack of an fsync here may well
explain two different reports we've seen of corrupted lockfile contents,
which doesn't particularly bother the running server but can prevent a
new server from starting if the old one crashes. Per suggestion from
Alvaro.
Back-patch to all supported versions.
in particular, propagate a fix in the test to see whether a UTF8 character has
length 4 bytes. This is likely of little real-world consequence because
5-or-more-byte UTF8 sequences are not supported by Postgres nor seen anywhere
in the wild, but still we may as well get it right. Problem found by Joseph
Adams.
Bug is aboriginal, so back-patch all the way.
used by array_agg(), string_agg(), and similar aggregate functions that use
"internal" as their transition datatype. The previous coding thought this
took *no* extra space, since "internal" is pass-by-value; but actually these
aggregates typically consume a great deal of space. Per bug #5608 from
Itagaki Takahiro, and fix suggestion from Hitoshi Harada.
Back-patch to 8.4, where array_agg was introduced.
path that specifies useTemp, but there is no active temp schema in the
current session. (This can happen if the path was saved during a transaction
that created a temp schema and was later rolled back.) For existing callers
it's sufficient to ignore the useTemp flag in this case, though we might
later want to offer an option to create a fresh temp schema. So far as I can
tell this is just an Assert failure: in a non-assert build, the code would
push a zero onto the new search path, which is useless but not very harmful.
Per bug report from Heikki.
Back-patch to 8.3; prior versions don't have this code.
expressions. We need to deal with this when handling subscripts in an array
assignment, and also when catching an exception. In an Assert-enabled build
these omissions led to Assert failures, but I think in a normal build the
only consequence would be short-term memory leakage; which may explain why
this wasn't reported from the field long ago.
Back-patch to all supported versions. 7.4 doesn't have exceptions, but
otherwise these bugs go all the way back.
Heikki Linnakangas and Tom Lane
Without this patch, constraints inherited by children of a parent
table which itself has multiple inheritance parents can end up with
the wrong coninhcount. After dropping the constraint, the children
end up with a leftover copy of the constraint that is not dumped
and cannot be dropped. There is a similar problem with ALTER TABLE
.. ADD COLUMN, but that looks significantly more difficult to
resolve, so I'm committing this fix separately.
Back-patch to 8.4, which is the first release that has coninhcount.
Report by Hank Enting.
tsqueries. CompareTSQ has to have a guard for the case rather than blindly
applying QTNodeCompare to random data past the end of the datums. Also,
change QTNodeCompare to be a little less trusting: use an actual test rather
than just Assert'ing that the input is sane. Problem encountered while
investigating another issue (I saw a core dump in autoanalyze on a table
containing multiple empty tsquery values).
Back-patch to all branches with tsquery support.
In HEAD, also fix some bizarre (though not outright wrong) coding in
tsq_mcontains().
Although the key-combining code claimed to work correctly if its input
contained both lossy and exact pointers for a single page in a single TID
stream, in fact this did not work, and could not work without pretty
fundamental redesign. Modify keyGetItem so that it will not return such a
stream, by handling lossy-pointer cases a bit more explicitly than we did
before.
Per followup investigation of a gripe from Artur Dabrowski.
An example of a query that failed given his data set is
select count(*) from search_tab where
(to_tsvector('german', keywords ) @@ to_tsquery('german', 'ee:* | dd:*')) and
(to_tsvector('german', keywords ) @@ to_tsquery('german', 'aa:*'));
Back-patch to 8.4 where the lossy pointer code was introduced.
possible (ie, whenever the tsquery is a constant), even when no statistics
are available for the tsvector. For example, foo @@ 'a & b'::tsquery
can be expected to be more selective than foo @@ 'a'::tsquery, whether
or not we know anything about foo. We use DEFAULT_TS_MATCH_SEL as the assumed
selectivity of individual query terms when no stats are available, then
combine the terms according to the query's AND/OR structure as usual.
Per experimentation with Artur Dabrowski's example. (The fact that there
are no stats available in that example is a problem in itself, but
nonetheless tsmatchsel should be smarter about the case.)
Back-patch to 8.4 to keep all versions of tsmatchsel() in sync.
routines to make them behave better in the presence of "lossy" index pointers.
The previous coding was outright incorrect for some cases, as recently
reported by Artur Dabrowski: scanGetItem would fail to return index entries in
cases where one index key had multiple exact pointers on the same page as
another key had a lossy pointer. Also, keyGetItem was extremely inefficient
for cases where a single index key generates multiple "entry" streams, such as
an @@ operator with a multiple-clause tsquery. The presence of a lossy page
pointer in any one stream defeated its ability to use the opclass
consistentFn, resulting in probing many heap pages that didn't really need to
be visited. In Artur's example case, a query like
WHERE tsvector @@ to_tsquery('a & b')
was about 50X slower than the theoretically equivalent
WHERE tsvector @@ to_tsquery('a') AND tsvector @@ to_tsquery('b')
The way that I chose to fix this was to have GIN call the consistentFn
twice with both TRUE and FALSE values for the in-doubt entry stream,
returning a hit if either call produces TRUE, but not if they both return
FALSE. The code handles this for the case of a single in-doubt entry stream,
but punts (falling back to the stupid behavior) if there's more than one lossy
reference to the same page. The idea could be scaled up to deal with multiple
lossy references, but I think that would probably be wasted complexity. At
least to judge by Artur's example, such cases don't occur often enough to be
worth trying to optimize.
Back-patch to 8.4. 8.3 did not have lossy GIN index pointers, so not
subject to these problems.
look through join alias Vars to avoid breaking join queries, and
move the test to someplace where it will catch more possible ways
of calling a function. We still ought to throw away the whole thing
in favor of a data-type-based solution, but that's not feasible in
the back branches.
Completion of back-port of my patch of yesterday.
assuming that a local char[] array would be aligned on at least a word
boundary. There are architectures on which that is pretty much guaranteed to
NOT be the case ... and those arches also don't like non-aligned memory
accesses, meaning that log_newpage() would crash if it ever got invoked.
Even on Intel-ish machines there's a potential for a large performance penalty
from doing I/O to an inadequately aligned buffer. So palloc it instead.
Backpatch to 8.0 --- 7.4 doesn't have this code.
If a zeroed page is present in the heap, ALTER TABLE .. SET TABLESPACE will
set the LSN and TLI while copying it, which is wrong, and heap_xlog_newpage()
will do the same thing during replay, so the corruption propagates to any
standby. Note, however, that the bug can't be demonstrated unless archiving
is enabled, since in that case we skip WAL logging altogether, and the LSN/TLI
are not set.
Back-patch to 8.0; prior releases do not have tablespaces.
Analysis and patch by Jeff Davis. Adjustments for back-branches and minor
wordsmithing by me.
a pass-by-reference datatype with a nontrivial projection step.
We were using the same memory context for the projection operation as for
the temporary context used by the hashtable routines in execGrouping.c.
However, the hashtable routines feel free to reset their temp context at
any time, which'd lead to destroying input data that was still needed.
Report and diagnosis by Tao Ma.
Back-patch to 8.1, where the problem was introduced by the changes that
allowed us to work with "virtual" tuples instead of materializing intermediate
tuple values everywhere. The earlier code looks quite similar, but it doesn't
suffer the problem because the data gets copied into another context as a
result of having to materialize ExecProject's output tuple.
to dump a PUBLIC user mapping correctly, as per bug #5560 from Shigeru Hanada.
Use the pg_user_mappings view rather than trying to access pg_user_mapping
directly, so that the code doesn't fail when run by a non-superuser. And
clean up some minor carelessness such as unsafe usage of fmtId().
Back-patch to 8.4 where this code was added.
parameter against server cert's CN field) to succeed in the case where
both host and hostaddr are specified. As with the existing precedents
for Kerberos, GSSAPI, SSPI, it is the calling application's responsibility
that host and hostaddr match up --- we just use the host name as given.
Per bug #5559 from Christopher Head.
In passing, make the error handling and messages for the no-host-name-given
failure more consistent among these four cases, and correct a lie in the
documentation: we don't attempt to reverse-lookup host from hostaddr
if host is missing.
Back-patch to 8.4 where SSL cert verification was introduced.
loop from being dropped, I missed subtransaction cleanup. Pinned portals
must be dropped at subtransaction cleanup just as they are at main
transaction cleanup.
Per bug #5556 by Robert Walker. Backpatch to 8.0, 7.4 didn't have
subtransactions.
use the actual element type of the array it's disassembling, rather than
trusting the type OID passed in by its caller. This is needed because
sometimes the planner passes in a type OID that's only binary-compatible
with the target column's type, rather than being an exact match. Per an
example from Bernd Helmle.
Possibly we should refactor get_attstatsslot/free_attstatsslot to not expect
the caller to supply type ID data at all, but for now I'll just do the
minimum-change fix.
Back-patch to 7.4. Bernd's test case only crashes back to 8.0, but since
these subroutines are the same in 7.4, I suspect there may be variant
cases that would crash 7.4 as well.
sub-select contains a join alias reference that expands into an expression
containing another sub-select. Per yesterday's report from Merlin Moncure
and subsequent off-list investigation.
Back-patch to 7.4. Older versions didn't attempt to flatten sub-selects in
ways that would trigger this problem.
being used in a PL/pgSQL FOR loop is closed was inadequate, as Tom Lane
pointed out. The bug affects FOR statement variants too, because you can
close an implicitly created cursor too by guessing the "<unnamed portal X>"
name created for it.
To fix that, "pin" the portal to prevent it from being dropped while it's
being used in a PL/pgSQL FOR loop. Backpatch all the way to 7.4 which is
the oldest supported version.
Backpatch to 8.3, which is as far back as we have opfamilies.
The opclass portion could probably be backpatched to 8.2, when
REASSIGN OWNED was added, but for now I have not done that.
Asko Tiidumaa, with minor adjustments by me.
The previous commit to make copydir() interruptible prevented
postgres.exe from linking on MinGW and Cygwin, because on those
platforms libpgport_srv.a can't freely reference symbols defined
by the backend. Since that code is already backend-specific anyway,
just move the whole file into the backend rather than adding further
kludges to deal with the symbols needed by CHECK_FOR_INTERRUPTS().
This probably needs some further cleanup, but this commit just moves
the file as-is, which should hopefully be enough to turn the
buildfarm green again.
This makes ALTER DATABASE .. SET TABLESPACE and CREATE DATABASE more
sensitive to interrupts. Backpatch to 8.4, where ALTER DATABASE .. SET
TABLESPACE was introduced. We could go back further, but in the absence
of complaints about the CREATE DATABASE case it doesn't seem worth it.
Guillaume Lelarge, with a small correction by me.
but we have nevertheless exposed them to users via pg_get_expr(). It would
be too much maintenance effort to rigorously check the input, so put a hack
in place instead to restrict pg_get_expr() so that the argument must come
from one of the system catalog columns known to contain valid expressions.
Per report from Rushabh Lathia. Backpatch to 7.4 which is the oldest
supported version at the moment.
as well as fseeko, and to not assume that fseeko(fp, 0, SEEK_CUR) proves
anything. Also improve some related comments. Per my observation that
the SEEK_CUR test didn't actually work on some platforms, and subsequent
discussion with Robert Haas.
Back-patch to 8.4. In earlier releases it's not that important whether
we get the hasSeek test right, but with parallel restore it matters.
contain data offsets (which it won't, if pg_dump thought its output wasn't
seekable). To do that, remove an unnecessarily aggressive error check, and
instead fail if we get to the end of the archive without finding the desired
data item. Also improve the error message to be more specific about the
cause of the problem. Per discussion of recent report from Igor Neyman.
Back-patch to 8.4 where parallel restore was introduced.
might close the cursor, rendering the Portal pointer to it invalid.
Closing the cursor in the middle of the loop is not a very sensible thing
to do, but we must handle it gracefully and throw an error instead of
crashing.
If such a Var appeared within a nested sub-select, we failed to translate it
correctly during pullup of the view, because the recursive call to
replace_rte_variables_mutator was looking for the wrong sublevels_up value.
Bug was introduced during the addition of the PlaceHolderVar mechanism.
Per bug #5514 from Marcos Castedo.
the current one. Not doing this would leave the walwriter with a handle to a
deleted file if there was nothing for it to do for a long period of time,
preventing the file from being completely removed.
Reported by Tollef Fog Heen, and thanks to Heikki for some hand-holding with
the patch.
to be initialized with proper values. Affected parameters are
fillfactor, analyze_threshold, and analyze_scale_factor.
Especially uninitialized fillfactor caused inefficient page usage
because we built a StdRdOptions struct in which fillfactor is zero
if any reloption is set for the toast table.
In addition, we disallow toast.autovacuum_analyze_threshold and
toast.autovacuum_analyze_scale_factor because we didn't actually
support them; they are always ignored.
Report by Rumko on pgsql-bugs on 12 May 2010.
Analysis by Tom Lane and Alvaro Herrera. Patch by me.
Backpatch to 8.4.
We must filter out hashtable entries with frequencies less than those
specified by the algorithm, else we risk emitting junk entries whose
actual frequency is much less than other lexemes that did not get
tabulated. This is bad enough by itself, but even worse is that
tsquerysel() believes that the minimum frequency seen in pg_statistic is a
hard upper bound for lexemes not included, and was thus underestimating
the frequency of non-MCEs.
Also, set the threshold frequency to something with a little bit of theory
behind it, to wit assume that the input distribution is approximately
Zipfian. This might need adjustment in future, but some preliminary
experiments suggest that it's not too unreasonable.
Back-patch to 8.4, where this code was introduced.
Jan Urbanski, with some editorialization by Tom
for sure ;-)). It now also optimizes more cases, such as %_%_. Improve
comments too. Per bug #5478.
In passing, also rename the TCHAR macro to GETCHAR, because pgindent is
messing with the formatting of the former (apparently it now thinks TCHAR
is a typedef name).
Back-patch to 8.3, where the bug was introduced.
is treated like end-of-input, if nulls sort last in that column and we are not
doing outer-join filling for that input. In such a case, the tuple cannot
join to anything from the other input (because we assume mergejoinable
operators are strict), and neither can any tuple following it in the sort
order. If we're not interested in doing outer-join filling we can just
pretend the tuple and its successors aren't there at all. This can save a
great deal of time in situations where there are many nulls in the join
column, as in a recent example from Scott Marlowe. Also, since the planner
tends to not count nulls in its mergejoin scan selectivity estimates, this
is an important fix to make the runtime behavior more like the estimate.
I regard this as an omission in the patch I wrote years ago to teach mergejoin
that tuples containing nulls aren't joinable, so I'm back-patching it. But
only to 8.3 --- in older versions, we didn't have a solid notion of whether
nulls sort high or low, so attempting to apply this optimization could break
things.
This saves cycles in get_ps_display() on many popular platforms, and more
importantly ensures that get_ps_display() will correctly return an empty
string if init_ps_display() hasn't been called yet. Per trouble report
from Ray Stell, in which log_line_prefix %i produced junk early in backend
startup.
Back-patch to 8.0. 7.4 doesn't have %i and its version of get_ps_display()
makes no pretense of avoiding pad junk anyhow.
before it checks whether the expression is immutable. This covers two cases
that were previously handled poorly:
1. SQL function inlining could reduce the apparent volatility of the
expression, allowing an expression to be accepted where it previously would
not have been. As an example, polymorphic functions must be marked with the
worst-case volatility they have for any argument type, but for specific
argument types they might not be so volatile, so indexing could be allowed.
(Since the planner will refuse to inline functions in cases where the
apparent volatility of the expression would increase, this won't break
any cases that were accepted before.)
2. A nominally immutable function could have default arguments that are
volatile expressions. In such a case insertion of the defaults will increase
both the apparent and actual volatility of the expression, so it is
*necessary* to check this before allowing the expression to be indexed.
Back-patch to 8.4, where default arguments were introduced.
If the original IN operator is cross-type, for example int8 = int4,
we need to use int4 < int4 to sort the inner data and int4 = int4
to unique-ify it. We got the first part of that right, but tried to
use the original IN operator for the equality checks. Per bug #5472
from Vlad Romascanu.
Backpatch to 8.4, where the bug was introduced by the patch that unified
SortClause and GroupClause. I was able to take out a whole lot of on-the-fly
calls of get_equality_op_for_ordering_op(), but failed to realize that
I needed to put one back in right here :-(
Asia/Novosibirsk on Windows.
Microsoft changed the behaviour of this zone in the timezone update
from KB976098. The zones differ in handling of DST, and the old
zone was just removed.
Noted by Dmitry Funk
that is a regular table or view owned by a superuser. This prevents a
trojan horse attack whereby any unprivileged SQL user could create such a
table and insert code into it that would then get executed in other users'
sessions whenever they call pltcl functions.
Worse yet, because the code was automatically loaded into both the "normal"
and "safe" interpreters at first use, the attacker could execute unrestricted
Tcl code in the "normal" interpreter without there being any pltclu functions
anywhere, or indeed anyone else using pltcl at all: installing pltcl is
sufficient to open the hole. Change the initialization logic so that the
"unknown" code is only loaded into an interpreter when the interpreter is
first really used. (That doesn't add any additional security in this
particular context, but it seems a prudent change, and anyway the former
behavior violated the principle of least astonishment.)
Security: CVE-2010-1170
fundamentally insecure. Instead apply an opmask to the whole interpreter that
imposes restrictions on unsafe operations. These restrictions are much harder
to subvert than is Safe.pm, since there is no container to be broken out of.
Backported to release 7.4.
In releases 7.4, 8.0 and 8.1 this also includes the necessary backporting of
the two interpreters model for plperl and plperlu adopted in release 8.2.
In versions 8.0 and up, the use of Perl's POSIX module to undo its locale
mangling on Windows has become insecure with these changes, so it is
replaced by our own routine, which is also faster.
Nice side effects of the changes include that it is now possible to use perl's
"strict" pragma in a natural way in plperl, and that perl's $a and
$b variables now work as expected in sort routines, and that function
compilation is significantly faster.
Tim Bunce and Andrew Dunstan, with reviews from Alex Hunsaker and
Alexey Klyukin.
Security: CVE-2010-1169
archive_command) as soon as possible, namely just before issuing a new call
of archive_command, even when there is a backlog of files to be archived.
The original coding would only absorb new settings after clearing the backlog
and returning to the outer loop. Per discussion.
Back-patch to 8.3. The logic in prior versions is a bit different and it
doesn't seem worth taking any risks of breaking it.
Now validators work properly even when the settings contain
parameters that affect behavior of the function, like search_path.
Reported by Erwin Brandstetter.
Depending on which spec you read, field widths and precisions in %s may be
counted either in bytes or characters. Our code was assuming bytes, which
is wrong at least for glibc's implementation, and in any case libc might
have a different idea of the prevailing encoding than we do. Hence, for
portable results we must avoid using anything more complex than just "%s"
unless the string to be printed is known to be all-ASCII.
This patch fixes the cases I could find, including the psql formatting
failure reported by Hernan Gonzalez. In HEAD only, I also added comments
to some places where it appears safe to continue using "%.*s".
refers to itself (directly or indirectly). Instead, print a message when
recursion is detected, and don't expand the repeated reference. Per bug
#5448 from Francis Markham.
Back-patch to 8.0. Although the issue exists in 7.4 as well, it seems
impractical to fix there because of the lack of any state stack that
could be used to track active expansions.
field of the WAL record. The previous coding always wrote to the main fork,
resulting in data corruption if the page was meant to go into a non-default
fork.
At present, the only operation that can produce such WAL records is
ALTER TABLE/INDEX SET TABLESPACE when executed with archive_mode = on.
Data corruption would be observed on standby slaves, and could occur on the
master as well if a database crash and recovery occurred after committing
the ALTER and before the next checkpoint. Per report from Gordon Shannon.
Back-patch to 8.4; the problem doesn't exist in earlier branches because
we didn't have a concept of multiple relation forks then.
returns EINVAL for an existing shared memory segment. Although it's not
terribly sensible, that behavior does meet the POSIX spec because EINVAL
is the appropriate error code when the existing segment is smaller than the
requested size, and the spec explicitly disclaims any particular ordering of
error checks. Moreover, it does in fact happen on OS X and probably other
BSD-derived kernels. (We were able to talk NetBSD into changing their code,
but purging that behavior from the wild completely seems unlikely to happen.)
We need to distinguish collision with a pre-existing segment from invalid size
request in order to behave sensibly, so it's worth some extra code here to get
it right. Per report from Gavin Kistner and subsequent investigation.
Back-patch to all supported versions, since any of them could get used
with a kernel having the debatable behavior.
memory if the result had zero rows, and also if there was any sort of error
while converting the result tuples into Python data. Reported and partially
fixed by Andres Freund.
Back-patch to all supported versions. Note: I haven't tested the 7.4 fix.
7.4's configure check for python is so obsolete it doesn't work on my
current machines :-(. The logic change is pretty straightforward though.
reload and rotation signals, and a helper thread reads messages from the
pipe and writes them to the log file. However, server code isn't generally
thread-safe, so if both try to do e.g palloc()/pfree() at the same time,
bad things will happen. To fix that, use a critical section (which is like
a mutex) to enforce that only one the threads are active at a time.
the SELECT query in \copy (SELECT ...) commands. This is unnecessary and
breaks numeric literals, as seen in bug #5411 from Vitalii Tymchyshyn.
This change has already been made in passing in HEAD; backpatch to 8.2
through 8.4 (earlier releases don't have COPY (SELECT ...) at all).
even when the expression is a query that returns no rows.
So far as I can tell, the only caller that actually fails when a garbage
OID is returned is exec_stmt_case(), which is new in 8.4 --- in all other
cases, we might make a useless trip through casting logic, but we won't
fail since the isnull flag will be set. Hence, backpatch only to 8.4,
just in case there are apps out there that aren't expecting an error to
be thrown if the query returns more or less than one column. (Which seems
unlikely, since the error would be thrown if the query ever did return a
row; but it's possible there's some never-exercised code out there.)
Per report from Mario Splivalo.
relcache reload works. In the patched code, a relcache entry in process of
being rebuilt doesn't get unhooked from the relcache hash table; which means
that if a cache flush occurs due to sinval queue overrun while we're
rebuilding it, the entry could get blown away by RelationCacheInvalidate,
resulting in crash or misbehavior. Fix by ensuring that an entry being
rebuilt has positive refcount, so it won't be seen as a target for removal
if a cache flush occurs. (This will mean that the entry gets rebuilt twice
in such a scenario, but that's okay.) It appears that the problem can only
arise within a transaction that has previously reassigned the relfilenode of
a pre-existing table, via TRUNCATE or a similar operation. Per bug #5412
from Rusty Conover.
Back-patch to 8.2, same as the patch that introduced the problem.
I think that the failure can't actually occur in 8.2, since it lacks the
rd_newRelfilenodeSubid optimization, but let's make it work like the later
branches anyway.
Patch by Heikki, slightly editorialized on by me.
Windows timezone name where the information in the registry is
incomplete, instead of aborting.
This fixes cases when the registry information is incomplete for
a timezone that is alphabetically before the one that is in use.
Per report from Alexander Forschner
Windows, thanks to a feature in CRT called Parameter Validation.
Backpatch to 8.2, which is the oldest version supported on Windows. In
8.2 and 8.3 also backpatch the earlier change to use DEVNULL instead of
NULL_DEV #define for a /dev/null-like device. NULL_DEV was hard-coded to
"/dev/null" regardless of platform, which didn't work on Windows, while
DEVNULL works on all platforms. Restarting syslogger didn't work on
Windows on versions 8.3 and below because of that.
constraint exclusion on an inheritance set that is the target of an UPDATE
or DELETE query. Per gripe from Marc Cousin. Back-patch to 8.4 where
the feature was introduced.
by a superuser -- "ALTER USER f RESET setting" already disallows removing such a
setting.
Apply the same treatment to ALTER DATABASE d RESET ALL when run by a database
owner that's not superuser.
so that we won't try to attach any context printouts to messages that get
emitted while exiting. Per report from Dennis Koegel, the context functions
won't necessarily work after we've started shutting down the backend, and it
seems possible that debug_query_string could be pointing at freed storage
as well. The context information doesn't seem particularly relevant to
such messages anyway, so there's little lost by suppressing it.
Back-patch to all supported branches. I can only demonstrate a crash with
log_disconnections messages back to 8.1, but the risk seems real in 8.0 and
before anyway.
catalog entries via SearchSysCache and related operations. Although, at the
time that these callbacks are called by elog.c, we have not officially aborted
the current transaction, it still seems rather risky to initiate any new
catalog fetches. In all these cases the needed information is readily
available in the caller and so it's just a matter of a bit of extra notation
to pass it to the callback.
Per crash report from Dennis Koegel. I've concluded that the real fix for
his problem is to clear the error context stack at entry to proc_exit, but
it still seems like a good idea to make the callbacks a bit less fragile
for other cases.
Backpatch to 8.4. We could go further back, but the patch doesn't apply
cleanly. In the absence of proof that this fixes something and isn't just
paranoia, I'm not going to expend the effort.
because InRedo was cleared before recovery_end_command was executed.
Also, always take ControlFileLock when reading checkpoint location for
%r. That didn't matter before, but in 8.4 bgwriter is active during
recovery and can modify the control file concurrently.
corner cases that come up in certain timezones (apparently, only those with
lots and lots of distinct TZ transition rules, as far as I can gather from
a quick scan of their archives). Per suggestion from Jeevan Chalke.
Back-patch to 8.4. Possibly we need to push this into earlier releases
as well, but I'm hesitant to update them to the 64-bit tzcode without
more thought and testing.
The latter is considered unwarranted chumminess with the implementation,
and can lead to crashes with recent Perl versions.
Report and fix by Tim Bunce. Back-patch to all versions containing the
questionable coding pattern.
--single-transaction are both used and the failure happens in commit,
e.g. failed deferred trigger. Also properly free BEGIN/COMMIT result
structures from --single-transaction.
Per report from Dominic Bevacqua
when warning about column-level privileges. This is more useful than before
and makes the apparent duplication complained of by Piyush Newe not so
duplicate. Also fix lack of quote marks in a related message text.
Back-patch to 8.4, where column-level privileges were introduced.
Stephen Frost
unless (1) the @ isn't quoted and (2) the filename isn't empty. This guards
against unexpectedly treating usernames or other strings in "flat files"
as inclusion requests, as seen in a recent trouble report from Ed L.
The empty-filename case would be guaranteed to misbehave anyway, because our
subsequent path-munging behavior results in trying to read the directory
containing the current input file.
I think this might finally explain the report at
http://archives.postgresql.org/pgsql-bugs/2004-05/msg00132.php
of a crash after printing "authentication file token too long, skipping",
since I was able to duplicate that message (though not a crash) on a
platform where stdio doesn't refuse to read directories. We never got
far in investigating that problem, but now I'm suspicious that the trigger
condition was an @ in the flat password file.
Back-patch to all active branches since the problem can be demonstrated in all
branches except HEAD. The test case, creating a user named "@", doesn't cause
a problem in HEAD since we got rid of the flat password file. Nonetheless it
seems like a good idea to not consider quoted @ as a file inclusion spec,
so I changed HEAD too.
set ferror() but never set feof(). This is known to be the case for recent
glibc when trying to read a directory as a file, and might be true for other
platforms/cases too. Per report from Ed L. (There is more that we ought to
do about his report, but this is one easily identifiable issue.)
too, instead of duplicating the functionality (badly).
I renamed xml_init to pg_xml_init, because the former seemed just a bit too
generic to be safe as a global symbol. I considered likewise renaming
xml_ereport to pg_xml_ereport, but felt that the reference to ereport probably
made it sufficiently PG-centric already.
formats; a null string must not be formatted as a numeric. The more exotic
formats latex and troff also incorrectly formatted all strings as numerics
when numericlocale was on.
Backpatch to 8.1 where numericlocale option was added.
This fixes bug #5355 reported by Andy Lester.
We had originally made the stronger assumption that NOT A refutes any B
if B implies A, but this fails in three-valued logic, because we need to
prove B is false not just that it's not true. However the logic does
go through if B is equal to A.
Recognizing this limited case is enough to handle examples that arise when
we have simplified "bool_var = true" or "bool_var = false" to just "bool_var"
or "NOT bool_var". If we had not done that simplification then the
btree-operator proof logic would have been able to prove that the expressions
were contradictory, but only for identical expressions being compared to the
constants; so handling identical A and B covers all the same cases.
The motivation for doing this is to avoid unexpected asymmetrical behavior
when a partitioned table uses a boolean partitioning column, as in today's
gripe from Dominik Sander.
Back-patch to 8.2, which is as far back as predicate_refuted_by attempts to
do anything at all with NOTs.
how often we do SSL session key renegotiation. Can be set to
0 to disable renegotiation completely, which is required if
a broken SSL library is used (broken patches to CVE-2009-3555
a known cause) or when using a client library that can't do
renegotiation.
segment of XLOG_BACKUP_END record even if the the record is placed
at a segment boundary. Furthermore the previous implementation could
return nonexistent segment file name when the boundary is in segments
that has "FE" suffix; We never use segments with "FF" suffix.
Backpatch to 8.0, where hot backup was introduced.
Reported by Fujii Masao.
old memory context in plpython. Before only one of them was marked
volatile, but per report from Zdenek Kotala, some compilers do the
wrong thing here.
ArrayRef expressions that are not in the immediate context of an INSERT or
UPDATE targetlist. Such cases never arise in stored rules, so ruleutils.c
hadn't tried to handle them. However, they do occur in the targetlists of
plans derived from such statements, and now that EXPLAIN VERBOSE tries to
print targetlists, we need some way to deal with the case.
I chose to represent an assignment ArrayRef as "array[subscripts] := source",
which is fairly reasonable and doesn't omit any information. However,
FieldStore is problematic because the planner will fold multiple assignments
to fields of the same composite column into one FieldStore, resulting in a
structure that is hard to understand at all, let alone display comprehensibly.
So in that case I punted and just made it print the source expression(s).
Backpatch to 8.4 --- the lack of functionality exists in older releases,
but doesn't seem to be important for lack of anything that would call it.
being assigned to, in case the expression to be assigned is a FieldStore that
would need to modify that value. The need for this was foreseen some time
ago, but not implemented then because we did not have arrays of composites.
Now we do, but the point evidently got overlooked in that patch. Net result
is that updating a field of an array element doesn't work right, as
illustrated if you try the new regression test on an unpatched backend.
Noted while experimenting with EXPLAIN VERBOSE, which has also got some issues
in this area.
Backpatch to 8.3, where arrays of composites were introduced.
is aborted, if they were created within the failed xact. This prevents
ExecutorEnd from being run on them, which is a good idea because they may
contain references to tables or other objects that no longer exist.
In particular this is hazardous when auto_explain is active, but it's
really rather surprising that nobody has seen an issue with this before.
I'm back-patching this to 8.4, since that's the first version that contains
auto_explain or an ExecutorEnd hook, but I wonder whether we shouldn't
back-patch further.
that happens to be composite itself. Per bug #5314 from Oleg Serov.
Backpatch to 8.0 --- 7.4 has got too many other shortcomings in
composite-type support to make this worth worrying about in that branch.
relations (they don't live in pg_toast). This caused an Assert failure in
assert-enabled builds. So far as I can see, in a non-assert build it would
only have messed up the checks for conflicting names, so a failure would be
quite improbable but perhaps not impossible.
matching before recursing instead of after. The DFA match eliminates
unworkable midpoint choices a lot faster than the recursive check, in most
cases, so doing it first can speed things up; particularly in pathological
cases such as recently exhibited by Michael Glaesemann.
In addition, apply some cosmetic changes that were applied upstream (in the
Tcl project) at the same time, in order to sync with upstream version 1.15
of regexec.c.
Upstream apparently intends to backpatch this, so I will too. The
pathological behavior could be unpleasant if encountered in the field,
which seems to justify any risk of introducing new bugs.
Tom Lane, reviewed by Donal K. Fellows of Tcl project
There was a race condition where the receiving pipe could be closed by the
child thread if the main thread was pre-empted before it got a chance to
create a new one, and the dispatch thread ran to completion during that time.
One symptom of this is that rows in pg_listener could be dropped under
heavy load.
Analysis and original patch by Radu Ilie, with some small
modifications by Magnus Hagander.
Since all current and foreseeable future command tags will be pure ASCII,
there is no need to do conversion on them. This saves a few cycles and also
avoids polluting otherwise-pristine subtransaction memory contexts, which
is the cause of the backend memory leak exhibited in bug #5302. (Someday
we'll probably want to have a better method of determining whether
subtransaction contexts need to be kept around, but today is not that day.)
Backpatch to 8.0. The cycle-shaving aspect of this would work in 7.4
too, but without subtransactions the memory-leak aspect doesn't apply,
so it doesn't seem worth touching 7.4.
(failure to free col_lineptrs[] array elements) and exacerbated in the
current devel cycle (failure to free "wrap"). This resulted in moderate
bloat of psql over long script runs. Noted while testing bug #5302,
although what the reporter was complaining of was backend-side leakage.
You might think this is unnecessary since that interpreter is never used
to run code --- but it turns out that's wrong. As of Tcl 8.5, the "clock"
command (alone among builtin Tcl commands) is partially implemented by
loaded-on-demand Tcl code, which means that it fails if there's not
unknown-command support, and also that it's impossible to run it directly
in a safe interpreter. The way they get around the latter is that
Tcl_CreateSlave() automatically sets up an alias command that forwards any
execution of "clock" in a safe slave interpreter to its parent interpreter.
Thus, when attempting to execute "clock" in trusted pltcl, the command
actually executes in the "hold" interpreter, where it will fail if
unknown-command support hasn't been introduced by sourcing the standard
init.tcl script, which is done by Tcl_Init(). (This is a pretty dubious
design decision on the Tcl boys' part, if you ask me ... but they didn't.)
Back-patch all the way. It's not clear that anyone would try to use ancient
versions of pltcl with a recent Tcl, but it's not clear they wouldn't, either.
Also add a regression test using "clock", in branches that have regression
test support for pltcl.
Per recent trouble report from Kyle Bateman.
AbortTransaction or AbortSubTransaction, when trying to clean up after an
error that prevented (sub)transaction start from completing:
* access to TopTransactionResourceOwner that might not exist
* assert failure in AtEOXact_GUC, if AtStart_GUC not called yet
* assert failure or core dump in AfterTriggerEndSubXact, if
AfterTriggerBeginSubXact not called yet
Per testing by injecting elog(ERROR) at successive steps in StartTransaction
and StartSubTransaction. It's not clear whether all of these cases could
really occur in the field, but at least one of them is easily exposed by
simple stress testing, as per my accidental discovery yesterday.
the various disk-size-reporting functions will respond to query cancel
reasonably promptly even in very large databases. Per report from
Kevin Grittner.
dump IDs, because the array we're using is sized according to the highest
dump ID actually defined in the archive file. In a partial dump there could
be references to higher dump IDs that weren't dumped. Treat these the same
as references to in-range IDs that weren't dumped. (The whole thing is a
bit scary because the missing objects might have been part of dependency
chains, which we won't know about. Not much we can do though --- throwing
an error is probably overreaction.)
Also, reject parallel restore with pre-1.8 archive version (made by pre-8.0
pg_dump). In these old versions the dependency entries are OIDs, not dump
IDs, and we don't have enough information to interpret them.
Per bug #5288 from Jon Erdman.
EXISTS that contains a WITH clause. This would usually lead to a
"could not find CTE" error later in planning, because the WITH wouldn't
get processed at all. Noted while playing with an example from Ken Marshall.
after it's released its reference count for the cached plan. There are
code paths that might try to examine the plan list before noticing that
the portal is already in aborted state. Report and diagnosis by Tatsuo
Ishii, though this isn't exactly his proposed patch.
underlying catalog not only the index itself. Otherwise, if the cache
load process touches the catalog (which will happen for many though not
all of these indexes), we are locking index before parent table, which can
result in a deadlock against processes that are trying to lock them in the
normal order. Per today's failure on buildfarm member gothic_moth; it's
surprising the problem hadn't been identified before.
Back-patch to 8.2. Earlier releases didn't have the issue because they
didn't try to lock these indexes during load (instead assuming that they
couldn't change schema at all during multiuser operation).
especially not ROLLBACK. ROLLBACK might need to be executed in an already
aborted transaction, when there is no safe way to revalidate the plan. But
in general there's no point in marking utility statements invalid, since
they have no plans in the normal sense of the word; so we might as well
work a bit harder here to avoid future revalidation cycles.
Back-patch to 8.4, where the bug was introduced.
