This allows MERGE commands to include WHEN NOT MATCHED BY SOURCE
actions, which operate on rows that exist in the target relation, but
not in the data source. These actions can execute UPDATE, DELETE, or
DO NOTHING sub-commands.
This is in contrast to already-supported WHEN NOT MATCHED actions,
which operate on rows that exist in the data source, but not in the
target relation. To make this distinction clearer, such actions may
now be written as WHEN NOT MATCHED BY TARGET.
Writing WHEN NOT MATCHED without specifying BY SOURCE or BY TARGET is
equivalent to writing WHEN NOT MATCHED BY TARGET.
Dean Rasheed, reviewed by Alvaro Herrera, Ted Yu and Vik Fearing.
Discussion: https://postgr.es/m/CAEZATCWqnKGc57Y_JanUBHQXNKcXd7r=0R4NEZUVwP+syRkWbA@mail.gmail.com
When a plain aggregate is used as a window function, and the window
frame start is specified as UNBOUNDED PRECEDING, the frame's head
cannot move so we do not need to use moving-aggregate mode. The check
for that was put into initialize_peragg(), failing to notice that
ExecInitWindowAgg() calls that function before it's filled in
winstate->frameOptions. Since makeNode() would have zeroed the field,
this didn't provoke uninitialized-value complaints, nor would the
erroneous decision have resulted in more than a little inefficiency.
Still, it's wrong, so move the initialization of
winstate->frameOptions earlier to make it work properly.
While here, also fix a thinko in a comment. Both errors crept in in
commit a9d9acbf2 which introduced the moving-aggregate mode.
Spotted by Vallimaharajan G. Back-patch to all supported branches.
Discussion: https://postgr.es/m/18e7f2a5167.fe36253866818.977923893562469143@zohocorp.com
Currently, in read committed transaction isolation mode (default), we have the
following sequence of actions when tuple_update()/tuple_delete() finds
the tuple updated by the concurrent transaction.
1. Attempt to update/delete tuple with tuple_update()/tuple_delete(), which
returns TM_Updated.
2. Lock tuple with tuple_lock().
3. Re-evaluate plan qual (recheck if we still need to update/delete and
calculate the new tuple for update).
4. Second attempt to update/delete tuple with tuple_update()/tuple_delete().
This attempt should be successful, since the tuple was previously locked.
This commit eliminates step 2 by taking the lock during the first
tuple_update()/tuple_delete() call. The heap table access method saves some
effort by checking the updated tuple once instead of twice. Future
undo-based table access methods, which will start from the latest row version,
can immediately place a lock there.
Also, this commit makes tuple_update()/tuple_delete() optionally save the old
tuple into the dedicated slot. That saves efforts on re-fetching tuples in
certain cases.
The code in nodeModifyTable.c is simplified by removing the nested switch/case.
Discussion: https://postgr.es/m/CAPpHfdua-YFw3XTprfutzGp28xXLigFtzNbuFY8yPhqeq6X5kg%40mail.gmail.com
Reviewed-by: Aleksander Alekseev, Pavel Borisov, Vignesh C, Mason Sharp
Reviewed-by: Andres Freund, Chris Travers
This allows us to abstract how/whether table AM uses transaction identifiers.
A custom table AM can use a custom slot, which may not store xmin directly,
but determine the tuple belonging to the current transaction in the other way.
Discussion: https://postgr.es/m/CAPpHfdurb9ycV8udYqM%3Do0sPS66PJ4RCBM1g-bBpvzUfogY0EA%40mail.gmail.com
Reviewed-by: Matthias van de Meent, Mark Dilger, Pavel Borisov
Reviewed-by: Nikita Malakhov, Japin Li
This allows table AM to return a native tuple slot even if
VirtualTupleTableSlot is given as an input. Native tuple slots have knowledge
about system attributes, which could be accessed in the future.
table_multi_insert() method already can modify the input 'slots' array.
Discussion: https://postgr.es/m/CAPpHfdurb9ycV8udYqM%3Do0sPS66PJ4RCBM1g-bBpvzUfogY0EA%40mail.gmail.com
Reviewed-by: Matthias van de Meent, Mark Dilger, Pavel Borisov
Reviewed-by: Nikita Malakhov, Japin Li
This introduces the following SQL/JSON functions for querying JSON
data using jsonpath expressions:
JSON_EXISTS(), which can be used to apply a jsonpath expression to a
JSON value to check if it yields any values.
JSON_QUERY(), which can be used to to apply a jsonpath expression to
a JSON value to get a JSON object, an array, or a string. There are
various options to control whether multi-value result uses array
wrappers and whether the singleton scalar strings are quoted or not.
JSON_VALUE(), which can be used to apply a jsonpath expression to a
JSON value to return a single scalar value, producing an error if it
multiple values are matched.
Both JSON_VALUE() and JSON_QUERY() functions have options for
handling EMPTY and ERROR conditions, which can be used to specify
the behavior when no values are matched and when an error occurs
during jsonpath evaluation, respectively.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Author: Jian He <jian.universality@gmail.com>
Reviewers have included (in no particular order):
Andres Freund, Alexander Korotkov, Pavel Stehule, Andrew Alsup,
Erik Rijkers, Zihong Yu, Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby, Álvaro Herrera, Jian He, Anton A. Melnikov,
Nikita Malakhov, Peter Eisentraut, Tomas Vondra
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqHROpf9e644D8BRqYvaAPmgBZVup-xKMDPk-nd4EpgzHw@mail.gmail.com
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
This allows a RETURNING clause to be appended to a MERGE query, to
return values based on each row inserted, updated, or deleted. As with
plain INSERT, UPDATE, and DELETE commands, the returned values are
based on the new contents of the target table for INSERT and UPDATE
actions, and on its old contents for DELETE actions. Values from the
source relation may also be returned.
As with INSERT/UPDATE/DELETE, the output of MERGE ... RETURNING may be
used as the source relation for other operations such as WITH queries
and COPY commands.
Additionally, a special function merge_action() is provided, which
returns 'INSERT', 'UPDATE', or 'DELETE', depending on the action
executed for each row. The merge_action() function can be used
anywhere in the RETURNING list, including in arbitrary expressions and
subqueries, but it is an error to use it anywhere outside of a MERGE
query's RETURNING list.
Dean Rasheed, reviewed by Isaac Morland, Vik Fearing, Alvaro Herrera,
Gurjeet Singh, Jian He, Jeff Davis, Merlin Moncure, Peter Eisentraut,
and Wolfgang Walther.
Discussion: http://postgr.es/m/CAEZATCWePEGQR5LBn-vD6SfeLZafzEm2Qy_L_Oky2=qw2w3Pzg@mail.gmail.com
The parallel query infrastructure copies the leader backend's active
snapshot to the worker processes. But BitmapHeapScan node also had
bespoken code to pass the snapshot from leader to the worker. That was
redundant, so remove it.
The removed code was analogous to the snapshot serialization in
table_parallelscan_initialize(), but that was the wrong role model. A
parallel bitmap heap scan is more like an independent non-parallel
bitmap heap scan in each parallel worker as far as the table AM is
concerned, because the coordination is done in nodeBitmapHeapscan.c,
and the table AM doesn't need to know anything about it.
This relies on the assumption that es_snapshot ==
GetActiveSnapshot(). That's not a new assumption, things would get
weird if you used the QueryDesc's snapshot for visibility checks in
the scans, but the active snapshot for evaluating quals, for
example. This could use some refactoring and cleanup, but for now,
just add some assertions.
Reviewed-by: Dilip Kumar, Robert Haas
Discussion: https://www.postgresql.org/message-id/5f3b9d59-0f43-419d-80ca-6d04c07cf61a@iki.fi
There is a very ancient hack in check_sql_fn_retval that allows a
single SELECT targetlist entry of composite type to be taken as
supplying all the output columns of a function returning composite.
(This is grotty and fundamentally ambiguous, but it's really hard
to do nested composite-returning functions without it.)
As far as I know, that doesn't cause any problems in ordinary
functions. It's disastrous for procedures however. All procedures
that have any output parameters are labeled with prorettype RECORD,
and the CALL code expects it will get back a record with one column
per output parameter, regardless of whether any of those parameters
is composite. Doing something else leads to an assertion failure
or core dump.
This is simple enough to fix: we just need to not apply that rule
when considering procedures. However, that requires adding another
argument to check_sql_fn_retval, which at least in principle might be
getting called by external callers. Therefore, in the back branches
convert check_sql_fn_retval into an ABI-preserving wrapper around a
new function check_sql_fn_retval_ext.
Per report from Yahor Yuzefovich. This has been broken since we
implemented procedures, so back-patch to all supported branches.
Discussion: https://postgr.es/m/CABz5gWHSjj2df6uG0NRiDhZ_Uz=Y8t0FJP-_SVSsRsnrQT76Gg@mail.gmail.com
For pass-by-reference types, the code added in 0b053e78b, which aimed to
resolve a memory leak, was overly aggressive in resetting the per-tuple
memory context which could result in pfree'd memory being accessed
resulting in failing to find previously cached results in the hash
table.
What was happening was prepare_probe_slot() was switching to the
per-tuple memory context and calling ExecEvalExpr(). ExecEvalExpr() may
have required a memory allocation. Both MemoizeHash_hash() and
MemoizeHash_equal() were aggressively resetting the per-tuple context
and after determining the hash value, the context would have gotten reset
before MemoizeHash_equal() was called. This could have resulted in
MemoizeHash_equal() looking at pfree'd memory.
This is less likely to have caused issues on a production build as some
other allocation would have had to have reused the pfree'd memory to
overwrite it. Otherwise, the original contents would have been intact.
However, this clearly caused issues on MEMORY_CONTEXT_CHECKING builds.
Author: Tender Wang, Andrei Lepikhov
Reported-by: Tender Wang (using SQLancer)
Reviewed-by: Andrei Lepikhov, Richard Guo, David Rowley
Discussion: https://postgr.es/m/CAHewXNnT6N6UJkya0z-jLFzVxcwGfeRQSfhiwA+NyLg-x8iGew@mail.gmail.com
Backpatch-through: 14, where Memoize was added
When an UPDATE or DELETE action in MERGE returns TM_SelfModified,
there are 2 possible causes:
1). The target tuple was already updated or deleted by the current
command. This can happen if the target row joins to more than one
source row, and the SQL standard explicitly says that this must be
an error.
2). The target tuple was already updated or deleted by a later command
in the current transaction. This can happen if the tuple is
modified by a BEFORE trigger or a volatile function used in the
query, and should be an error for the same reason that it is in a
plain UPDATE or DELETE command.
In MERGE's primary error handling block, it failed to check for (2),
causing it to return a misleading error message in such cases.
In the secondary error handling block, following a concurrent update
from another session, it failed to check for (1), causing it to
silently ignore target rows joined to more than one source row,
instead of reporting an error.
Fix this, and add tests for both of these cases.
Per report from Wenjiang Zhang. Back-patch to v15, where MERGE was
introduced.
Discussion: https://postgr.es/m/tencent_41DE0FF443FE14B94A5898D373792109E408%40qq.com
In the corner case where a function returning RECORD has been
simplified to a RECORD constant or an inlined ROW() expression,
ExecInitFunctionScan failed to cross-check the function's result
rowtype against the coldeflist provided by the calling query.
That happened because get_expr_result_type is able to extract a
tupdesc from such expressions, which led ExecInitFunctionScan to
ignore the coldeflist. (Instead, it used the extracted tupdesc
to check the function's output, which of course always succeeds.)
I have not been able to demonstrate any really serious consequences
from this, because if some column of the result is of the wrong
type and is directly referenced by a Var of the calling query,
CheckVarSlotCompatibility will catch it. However, we definitely do
fail to report the case where the function returns more columns than
the coldeflist expects, and in the converse case where it returns
fewer columns, we get an assert failure (but, seemingly, no worse
results in non-assert builds).
To fix, always build the expected tupdesc from the coldeflist if there
is one, and consult get_expr_result_type only when there isn't one.
Also remove the failing Assert, even though it is no longer reached
after this fix. It doesn't seem to be adding anything useful, since
later checking will deal with cases with the wrong number of columns.
The only other place I could find that is doing something similar
is inline_set_returning_function. There's no live bug there because
we cannot be looking at a Const or RowExpr, but for consistency
change that code to agree with ExecInitFunctionScan.
Per report from PetSerAl. After some debate I've concluded that
this should be back-patched. There is a small risk that somebody
has been relying on such a case not throwing an error, but I judge
this outweighed by the risk that I've missed some way in which the
failure to cross-check has worse consequences than sketched above.
Discussion: https://postgr.es/m/CAKygsHSerA1eXsJHR9wft3Gn3wfHQ5RfP8XHBzF70_qcrrRvEg@mail.gmail.com
as determined by include-what-you-use (IWYU)
While IWYU also suggests to *add* a bunch of #include's (which is its
main purpose), this patch does not do that. In some cases, a more
specific #include replaces another less specific one.
Some manual adjustments of the automatic result:
- IWYU currently doesn't know about includes that provide global
variable declarations (like -Wmissing-variable-declarations), so
those includes are being kept manually.
- All includes for port(ability) headers are being kept for now, to
play it safe.
- No changes of catalog/pg_foo.h to catalog/pg_foo_d.h, to keep the
patch from exploding in size.
Note that this patch touches just *.c files, so nothing declared in
header files changes in hidden ways.
As a small example, in src/backend/access/transam/rmgr.c, some IWYU
pragma annotations are added to handle a special case there.
Discussion: https://www.postgresql.org/message-id/flat/af837490-6b2f-46df-ba05-37ea6a6653fc%40eisentraut.org
Previously, backend ID was an index into the ProcState array, in the
shared cache invalidation manager (sinvaladt.c). The entry in the
ProcState array was reserved at backend startup by scanning the array
for a free entry, and that was also when the backend got its backend
ID. Things become slightly simpler if we redefine backend ID to be the
index into the PGPROC array, and directly use it also as an index to
the ProcState array. This uses a little more memory, as we reserve a
few extra slots in the ProcState array for aux processes that don't
need them, but the simplicity is worth it.
Aux processes now also have a backend ID. This simplifies the
reservation of BackendStatusArray and ProcSignal slots.
You can now convert a backend ID into an index into the PGPROC array
simply by subtracting 1. We still use 0-based "pgprocnos" in various
places, for indexes into the PGPROC array, but the only difference now
is that backend IDs start at 1 while pgprocnos start at 0. (The next
commmit will get rid of the term "backend ID" altogether and make
everything 0-based.)
There is still a 'backendId' field in PGPROC, now part of 'vxid' which
encapsulates the backend ID and local transaction ID together. It's
needed for prepared xacts. For regular backends, the backendId is
always equal to pgprocno + 1, but for prepared xact PGPROC entries,
it's the ID of the original backend that processed the transaction.
Reviewed-by: Andres Freund, Reid Thompson
Discussion: https://www.postgresql.org/message-id/8171f1aa-496f-46a6-afc3-c46fe7a9b407@iki.fi
This allows the target relation of MERGE to be an auto-updatable or
trigger-updatable view, and includes support for WITH CHECK OPTION,
security barrier views, and security invoker views.
A trigger-updatable view must have INSTEAD OF triggers for every type
of action (INSERT, UPDATE, and DELETE) mentioned in the MERGE command.
An auto-updatable view must not have any INSTEAD OF triggers. Mixing
auto-update and trigger-update actions (i.e., having a partial set of
INSTEAD OF triggers) is not supported.
Rule-updatable views are also not supported, since there is no
rewriter support for non-SELECT rules with MERGE operations.
Dean Rasheed, reviewed by Jian He and Alvaro Herrera.
Discussion: https://postgr.es/m/CAEZATCVcB1g0nmxuEc-A+gGB0HnfcGQNGYH7gS=7rq0u0zOBXA@mail.gmail.com
This field has been redundant ever since it was added by commit
25e777cf8e, which split up ExecUpdate() and ExecDelete() into reusable
pieces. The only place that reads it is ExecMergeMatched(), if the
result from ExecUpdateAct() is TM_Ok. However, all paths through
ExecUpdateAct() that return TM_Ok also set this field to true, so the
return status by itself is sufficient to tell if the update happened.
Removing this field is a modest simplification, and it brings the
UPDATE path in ExecMergeMatched() more into line with ExecUpdate(),
ensuring that ExecUpdateEpilogue() is always called if ExecUpdateAct()
returns TM_Ok, reducing the chance of bugs.
Dean Rasheed, reviewed by Alvaro Herrera.
Discussion: https://postgr.es/m/CAEZATCWGGmigGBzLHkJm5Ccv2mMxXmwi3%2Buq0yhwDHm-tsvSLg%40mail.gmail.com
Previously this hash table was built during executor startup. This
could cause long delays in EXPLAIN (without ANALYZE) when the planner
opts to use a large Memoize hash table.
No backpatch for now due to lack of complaints.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvoJktJ5XL=Kjh2a2TFr64R-7eQZV-+jcJrUwoES2GLiWg@mail.gmail.com
This adjusts the code for CoerceViaIO and CoerceToDomain expression
nodes to handle errors softly.
For CoerceViaIo, this adds a new ExprEvalStep opcode
EEOP_IOCOERCE_SAFE, which is implemented in the new accompanying
function ExecEvalCoerceViaIOSafe(). The only difference from
EEOP_IOCOERCE's inline implementation is that the input function
receives an ErrorSaveContext via the function's
FunctionCallInfo.context, which it can use to handle errors softly.
For CoerceToDomain, this simply entails replacing the ereport() in
ExecEvalConstraintNotNull() and ExecEvalConstraintCheck() by
errsave() passing it the ErrorSaveContext passed in the expression's
ExprEvalStep.
In both cases, the ErrorSaveContext to be used is passed by setting
ExprState.escontext to point to it before calling ExecInitExprRec()
on the expression tree whose errors are to be handled softly.
Note that there's no functional change as of this commit as no call
site of ExecInitExprRec() has been changed. This is intended for
implementing new SQL/JSON expression nodes in future commits.
Extracted from a much larger patch to add SQL/JSON query functions.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Reviewers have included (in no particular order) Andres Freund,
Alexander Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers,
Zihong Yu, Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby,
Álvaro Herrera, Jian He, Peter Eisentraut
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqHROpf9e644D8BRqYvaAPmgBZVup-xKMDPk-nd4EpgzHw@mail.gmail.com
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
During the calculations of the maximum for the number of buckets, take into
account that later we round that to the next power of 2.
Reported-by: Karen Talarico
Bug: #16925
Discussion: https://postgr.es/m/16925-ec96d83529d0d629%40postgresql.org
Author: Thomas Munro, Andrei Lepikhov, Alexander Korotkov
Reviewed-by: Alena Rybakina
Backpatch-through: 12
Many foreach loops only use the ListCell pointer to retrieve the
content of the cell, like so:
ListCell *lc;
foreach(lc, mylist)
{
int myint = lfirst_int(lc);
...
}
This commit adds a few convenience macros that automatically
declare the loop variable and retrieve the current cell's contents.
This allows us to rewrite the previous loop like this:
foreach_int(myint, mylist)
{
...
}
This commit also adjusts a few existing loops in order to add
coverage for the new/adjusted macros. There is presently no plan
to bulk update all foreach loops, as that could introduce a
significant amount of back-patching pain. Instead, these macros
are primarily intended for use in new code.
Author: Jelte Fennema-Nio
Reviewed-by: David Rowley, Alvaro Herrera, Vignesh C, Tom Lane
Discussion: https://postgr.es/m/CAGECzQSwXKnxGwW1_Q5JE%2B8Ja20kyAbhBHO04vVrQsLcDciwXA%40mail.gmail.com
1349d2790 added code to allow DISTINCT and ORDER BY aggregates to work
more efficiently by using presorted input. That commit added some code
that made use of the AggState's tmpcontext and adjusted the
ecxt_outertuple and ecxt_innertuple slots before checking if the current
row is distinct from the previously seen row. That code forgot to set the
TupleTableSlots back to what they were originally, which could result in
errors such as:
ERROR: attribute 1 of type record has wrong type
This only affects aggregate functions which have multiple arguments when
DISTINCT is used. For example: string_agg(DISTINCT col, ', ')
Thanks to Tom Lane for identifying the breaking commit.
Bug: #18264
Reported-by: Vojtěch Beneš
Discussion: https://postgr.es/m/18264-e363593d7e9feb7d@postgresql.org
Backpatch-through: 16, where 1349d2790 was added
Fix a bug during MERGE if a cross-partition update is attempted on a
partitioned table with a BEFORE DELETE ROW trigger that returns NULL,
to prevent the update. This would cause an error to be thrown, or an
assert failure in an assert-enabled build.
This was an oversight in 9321c79c86, which failed to properly
distinguish a DELETE prevented by a trigger from one prevented by a
concurrent update. Fix by having ExecDelete() return the TM_Result
status to ExecCrossPartitionUpdate(), so that it can distinguish the
two cases, and make ExecCrossPartitionUpdate() return the TM_Result
status to ExecUpdateAct(), so that it can return the correct status
from a concurrent update.
In addition, ensure that the command tag is correctly updated by
having ExecMergeMatched() pass canSetTag to ExecUpdateAct(), rather
than passing false, so that it updates the command tag if it does a
cross-partition update, making this code path in ExecMergeMatched()
consistent with ExecUpdate().
Per bug #18238 from Alexander Lakhin. Back-patch to v15, where MERGE
was introduced.
Dean Rasheed, reviewed by Richard Guo and Jian He.
Discussion: https://postgr.es/m/18238-2f2bdc7f720180b9%40postgresql.org
tts_virtual_copyslot() contained an Assert that checked that the srcslot
contained <= attributes than the dstslot. This seems to be backwards as
if the srcslot contained fewer attributes then the dstslot could be left
with stale Datum values from the previously stored tuple. It might make
more sense to allow the source to contain additional attributes and only
copy the leading ones that also exist in the destination, however, that's
not what we're doing here.
Here we just remove the Assert from tts_virtual_copyslot() and add an
Assert to ExecCopySlot() to verify the attribute counts match. There
does not seem to be any places where the destination contains fewer
attributes, so instead of going to the trouble of making the code
properly handle this, let's just ensure the attribute counts match. If
this Assert fails then that will indicate that we do have cases that
require us to handle the srcslot with more attributes than the dstslot.
It seems better to only write this code if there's a genuine requirement
for it rather than write it now only to leave it untested.
Thanks to Andres Freund for helping with the analysis of this.
Discussion: https://postgr.es/m/CAApHDvpMAvBL0T+TRORquyx1iqFQKMVTXtqNocOw0Pa2uh1heg@mail.gmail.com
The brininsert code used to initialize (and destroy) BrinDesc and
BrinRevmap for each tuple, which is not free. This patch initializes
these structures only once, and reuses them for all inserts in the same
command. The data is passed through indexInfo->ii_AmCache.
This also introduces an optional AM callback "aminsertcleanup" that
allows performing custom cleanup in case simply pfree-ing ii_AmCache is
not sufficient (which is the case when the cache contains TupleDesc,
Buffers, and so on).
Author: Soumyadeep Chakraborty
Reviewed-by: Alvaro Herrera, Matthias van de Meent, Tomas Vondra
Discussion: https://postgr.es/m/CAE-ML%2B9r2%3DaO1wwji1sBN9gvPz2xRAtFUGfnffpd0ZqyuzjamA%40mail.gmail.com
A WaitEventSet holds file descriptors or event handles (on Windows).
If FreeWaitEventSet is not called, those fds or handles are leaked.
Use ResourceOwners to track WaitEventSets, to clean those up
automatically on error.
This was a live bug in async Append nodes, if a FDW's
ForeignAsyncRequest function failed. (In back branches, I will apply a
more localized fix for that based on PG_TRY-PG_FINALLY.)
The added test doesn't check for leaking resources, so it passed even
before this commit. But at least it covers the code path.
In the passing, fix misleading comment on what the 'nevents' argument
to WaitEventSetWait means.
Report by Alexander Lakhin, analysis and suggestion for the fix by
Tom Lane. Fixes bug #17828.
Reviewed-by: Alexander Lakhin, Thomas Munro
Discussion: https://www.postgresql.org/message-id/472235.1678387869@sss.pgh.pa.us
As of commit eaa5808e8e, MemoryContextResetAndDeleteChildren() is
just a backwards compatibility macro for MemoryContextReset(). Now
that some time has passed, this macro seems more likely to create
confusion.
This commit removes the macro and replaces all remaining uses with
calls to MemoryContextReset(). Any third-party code that use this
macro will need to be adjusted to call MemoryContextReset()
instead. Since the two have behaved the same way since v9.5, such
adjustments won't produce any behavior changes for all
currently-supported versions of PostgreSQL.
Reviewed-by: Amul Sul, Tom Lane, Alvaro Herrera, Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/20231113185950.GA1668018%40nathanxps13
When executing a MERGE UPDATE action, if the UPDATE is turned into a
cross-partition DELETE then INSERT, do not attempt to invoke AFTER
UPDATE ROW triggers, or any of the other post-update actions in
ExecUpdateEpilogue().
For consistency with a plain UPDATE command, such triggers should not
be fired (and typically fail anyway), and similarly, other post-update
actions, such as WCO/RLS checks should not be executed, and might also
lead to unexpected failures.
Therefore, as with ExecUpdate(), make ExecMergeMatched() return
immediately if ExecUpdateAct() reports that a cross-partition update
was done, to be sure that no further processing is done for that
tuple.
Back-patch to v15, where MERGE was introduced.
Discussion: https://postgr.es/m/CAEZATCWjBgagyNZs02vgDF0DvASYj-iHTFtXG2-nP3orZhmtcw%40mail.gmail.com
When looping around after finding that the set-returning function
returned zero rows for the current input tuple, ExecProjectSet
neglected to reset either of the two memory contexts it's
responsible for cleaning out. Typically this wouldn't cause much
problem, because once the SRF does return at least one row, the
contexts would get reset on the next call. However, if the SRF
returns no rows for many input tuples in succession, quite a lot
of memory could be transiently consumed.
To fix, make sure we reset both contexts while looping around.
Per bug #18172 from Sergei Kornilov. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18172-9b8c5fc1d676ded3@postgresql.org
Since C99, there can be a trailing comma after the last value in an
enum definition. A lot of new code has been introducing this style on
the fly. Some new patches are now taking an inconsistent approach to
this. Some add the last comma on the fly if they add a new last
value, some are trying to preserve the existing style in each place,
some are even dropping the last comma if there was one. We could
nudge this all in a consistent direction if we just add the trailing
commas everywhere once.
I omitted a few places where there was a fixed "last" value that will
always stay last. I also skipped the header files of libpq and ecpg,
in case people want to use those with older compilers. There were
also a small number of cases where the enum type wasn't used anywhere
(but the enum values were), which ended up confusing pgindent a bit,
so I left those alone.
Discussion: https://www.postgresql.org/message-id/flat/386f8c45-c8ac-4681-8add-e3b0852c1620%40eisentraut.org
When an UPDATE/DELETE/MERGE's target table is an old-style
inheritance tree, it's possible for the parent to get excluded
from the plan while some children are not. (I believe this is
only possible if we can prove that a CHECK ... NO INHERIT
constraint on the parent contradicts the query WHERE clause,
so it's a very unusual case.) In such a case, ExecInitModifyTable
mistakenly concluded that the first surviving child is the target
table, leading to at least two bugs:
1. The wrong table's statement-level triggers would get fired.
2. In v16 and up, it was possible to fail with "invalid perminfoindex
0 in RTE with relid nnnn" due to the child RTE not having permissions
data included in the query plan. This was hard to reproduce reliably
because it did not occur unless the update triggered some non-HOT
index updates.
In v14 and up, this is easy to fix by defining ModifyTable.rootRelation
to be the parent RTE in plain inheritance as well as partitioned cases.
While the wrong-triggers bug also appears in older branches, the
relevant code in both the planner and executor is quite a bit
different, so it would take a good deal of effort to develop and
test a suitable patch. Given the lack of field complaints about the
trigger issue, I'll desist for now. (Patching v11 for this seems
unwise anyway, given that it will have no more releases after next
month.)
Per bug #18147 from Hans Buschmann.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/18147-6fc796538913ee88@postgresql.org
There was no I/O timing statistics for counting read and write timings
on local blocks, contrary to the counterparts for temp and shared
blocks. This information is available when track_io_timing is enabled.
The output of EXPLAIN is updated to show this information. An update of
pg_stat_statements is planned next.
Author: Nazir Bilal Yavuz
Reviewed-by: Robert Haas, Melanie Plageman
Discussion: https://postgr.es/m/CAN55FZ19Ss279mZuqGbuUNxka0iPbLgYuOQXqAKewrjNrp27VA@mail.gmail.com
These two counters, defined in BufferUsage to track respectively the
time spent while reading and writing blocks have historically only
tracked data related to shared buffers, when track_io_timing is enabled.
An upcoming patch to add specific counters for local buffers will take
advantage of this rename as it has come up that no data is currently
tracked for local buffers, and tracking local and shared buffers using
the same fields would be inconsistent with the treatment done for temp
buffers. Renaming the existing fields clarifies what the block type of
each stats field is.
pg_stat_statement is updated to reflect the rename. No extension
version bump is required as 5a3423ad8e has done one, affecting v17~.
Author: Nazir Bilal Yavuz
Reviewed-by: Robert Haas, Melanie Plageman
Discussion: https://postgr.es/m/CAN55FZ19Ss279mZuqGbuUNxka0iPbLgYuOQXqAKewrjNrp27VA@mail.gmail.com
This could only affect HASH partitioned tables with at least 2 partition
key columns.
If partition pruning was delayed until execution and the query contained
an IS NULL qual on one of the partitioned keys, and some subsequent
partitioned key was being compared to a non-Const, then this could result
in a crash due to the incorrect keyno being used to calculate the
stateidx for the expression evaluation code.
Here we fix this by properly skipping partitioned keys which have a
nullkey set. Effectively, this must be the same as what's going on
inside perform_pruning_base_step().
Sergei Glukhov also provided a patch, but that's not what's being used
here.
Reported-by: Sergei Glukhov
Reviewed-by: tender wang, Sergei Glukhov
Discussion: https://postgr.es/m/d05b26fa-af54-27e1-f693-6c31590802fa@postgrespro.ru
Backpatch-through: 11, where runtime partition pruning was added.
Ensure we switch to the per-tuple memory context to prevent any memory
leaks of detoasted Datums in MemoizeHash_hash() and MemoizeHash_equal().
Reported-by: Orlov Aleksej
Author: Orlov Aleksej, David Rowley
Discussion: https://postgr.es/m/83281eed63c74e4f940317186372abfd%40cft.ru
Backpatch-through: 14, where Memoize was added
This adjusts the expression evaluation code for CoerceViaIO and
CoerceToDomain to handle errors softly if needed.
For CoerceViaIo, this means using InputFunctionCallSafe(), which
provides the option to handle errors softly, instead of calling the
type input function directly.
For CoerceToDomain, this simply entails replacing the ereport() in
ExecEvalConstraintCheck() by errsave().
In both cases, the ErrorSaveContext to be used when evaluating the
expression is stored by ExecInitExprRec() in the expression's struct
in the expression's ExprEvalStep. The ErrorSaveContext is passed by
setting ExprState.escontext to point to it when calling
ExecInitExprRec() on the expression whose errors are to be handled
softly.
Note that no call site of ExecInitExprRec() has been changed in this
commit, so there's no functional change. This is intended for
implementing new SQL/JSON expression nodes in future commits that
will use to it suppress errors that may occur during type coercions.
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
Under some circumstances, concurrent MERGE operations could lead to
inconsistent results, that varied according the plan chosen. This was
caused by a lack of rowmarks on the source relation, which meant that
EvalPlanQual rechecking was not guaranteed to return the same source
tuples when re-running the join query.
Fix by ensuring that preprocess_rowmarks() sets up PlanRowMarks for
all non-target relations used in MERGE, in the same way that it does
for UPDATE and DELETE.
Per bug #18103. Back-patch to v15, where MERGE was introduced.
Dean Rasheed, reviewed by Richard Guo.
Discussion: https://postgr.es/m/18103-c4386baab8e355e3%40postgresql.org
This commit removes unnecessary ExecExprFreeContext() calls in
ExecEnd* routines because the actual cleanup is managed by
FreeExecutorState(). With no callers remaining for
ExecExprFreeContext(), this commit also removes the function.
This commit also drops redundant ExecClearTuple() calls, because
ExecResetTupleTable() in ExecEndPlan() already takes care of
resetting and dropping all TupleTableSlots initialized with
ExecInitScanTupleSlot() and ExecInitExtraTupleSlot().
After these modifications, the ExecEnd*() routines for ValuesScan,
NamedTuplestoreScan, and WorkTableScan became redundant. So, this
commit removes them.
Reviewed-by: Robert Haas
Discussion: https://postgr.es/m/CA+HiwqFGkMSge6TgC9KQzde0ohpAycLQuV7ooitEEpbKB0O_mg@mail.gmail.com
If MERGE executes an UPDATE action on a table with row-level security,
the code incorrectly applied the WITH CHECK clauses from the target
table's INSERT policies to new rows, instead of the clauses from the
table's UPDATE policies. In addition, it failed to check new rows
against the target table's SELECT policies, if SELECT permissions were
required (likely to always be the case).
In addition, if MERGE executes a DO NOTHING action for matched rows,
the code incorrectly applied the USING clauses from the target table's
DELETE policies to existing target tuples. These policies were applied
as checks that would throw an error, if they did not pass.
Fix this, so that a MERGE UPDATE action applies the same RLS policies
as a plain UPDATE query with a WHERE clause, and a DO NOTHING action
does not apply any RLS checks (other than adding clauses from SELECT
policies to the join).
Back-patch to v15, where MERGE was introduced.
Dean Rasheed, reviewed by Stephen Frost.
Security: CVE-2023-39418
This Patch introduces three SQL standard JSON functions:
JSON()
JSON_SCALAR()
JSON_SERIALIZE()
JSON() produces json values from text, bytea, json or jsonb values,
and has facilitites for handling duplicate keys.
JSON_SCALAR() produces a json value from any scalar sql value,
including json and jsonb.
JSON_SERIALIZE() produces text or bytea from input which containis
or represents json or jsonb;
For the most part these functions don't add any significant new
capabilities, but they will be of use to users wanting standard
compliant JSON handling.
Catversion bumped as this changes ruleutils.c.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby, Álvaro Herrera,
Peter Eisentraut
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
Previously, when selecting an usable index for update/delete for the
REPLICA IDENTITY FULL table, in IsIndexOnlyExpression(), we used to
check if all index fields are not expressions. However, it was not
necessary, because it is enough to check if only the leftmost index
field is not an expression (and references the remote table column)
and this check has already been done by
RemoteRelContainsLeftMostColumnOnIdx().
This commit removes IsIndexOnlyExpression() and
RemoteRelContainsLeftMostColumnOnIdx() and all checks for usable
indexes for REPLICA IDENTITY FULL tables are now performed by
IsIndexUsableForReplicaIdentityFull().
Backpatch this to remain the code consistent.
Reported-by: Peter Smith
Reviewed-by: Amit Kapila, Önder Kalacı
Discussion: https://postgr.es/m/CAHut%2BPsGRE5WSsY0jcLHJEoA17MrbP9yy8FxdjC_ZOAACxbt%2BQ%40mail.gmail.com
Backpatch-through: 16
Commit 89e46da5e5 allowed using BTREE indexes that are neither
PRIMARY KEY nor REPLICA IDENTITY on the subscriber during apply of
update/delete. This patch extends that functionality to also allow HASH
indexes.
We explored supporting other index access methods as well but they don't
have a fixed strategy for equality operation which is required by the
current infrastructure in logical replication to scan the indexes.
Author: Kuroda Hayato
Reviewed-by: Peter Smith, Onder Kalaci, Amit Kapila
Discussion: https://postgr.es/m/TYAPR01MB58669D7414E59664E17A5827F522A@TYAPR01MB5866.jpnprd01.prod.outlook.com
Commit 89e46da5e allowed REPLICA IDENTITY FULL tables to use an index
on the subscriber during apply of update/delete. This commit clarifies
in the documentation that the leftmost field of candidate indexes must
be a column (not an expression) that references the published relation
column.
The source code comments are also updated accordingly.
Reviewed-by: Peter Smith, Amit Kapila
Discussion: https://postgr.es/m/CAD21AoDJjffEvUFKXT27Q5U8-UU9JHv4rrJ9Ke8Zkc5UPWHLvA@mail.gmail.com
Backpatch-through: 16
A CaseTestExpr is currently being put into
JsonValueExpr.formatted_expr as placeholder for the result of
evaluating JsonValueExpr.raw_expr, which in turn is evaluated
separately. Though, there's no need for this indirection if
raw_expr itself can be embedded into formatted_expr and evaluated
as part of evaluating the latter, especially as there is no
special reason to evaluate it separately. So this commit makes it
so. As a result, JsonValueExpr.raw_expr no longer needs to be
evaluated in ExecInterpExpr(), eval_const_exprs_mutator() etc. and
is now only used for displaying the original "unformatted"
expression in ruleutils.c.
While at it, this also removes the function makeCaseTestExpr(),
because the code in makeJsonConstructorExpr() looks more readable
without it IMO and isn't used by anyone else either.
Finally, a note is added in the comment above CaseTestExpr's
definition that JsonConstructorExpr is also using it.
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
The Incremental Sort had a couple issues, resulting in leaking memory
during rescans, possibly triggering OOM. The code had a couple of
related flaws:
1. During rescans, the sort states were reset but then also set to NULL
(despite the comment saying otherwise). ExecIncrementalSort then
sees NULL and initializes a new sort state, leaking the memory used
by the old one.
2. Initializing the sort state also automatically rebuilt the info about
presorted keys, leaking the already initialized info. presorted_keys
was also unnecessarily reset to NULL.
Patch by James Coleman, based on patches by Laurenz Albe and Tom Lane.
Backpatch to 13, where Incremental Sort was introduced.
Author: James Coleman, Laurenz Albe, Tom Lane
Reported-by: Laurenz Albe, Zu-Ming Jiang
Backpatch-through: 13
Discussion: https://postgr.es/m/b2bd02dff61af15e3526293e2771f874cf2a3be7.camel%40cybertec.at
Discussion: https://postgr.es/m/db03c582-086d-e7cd-d4a1-3bc722f81765%40inf.ethz.ch
If the given composite datum is toasted out-of-line,
DatumGetHeapTupleHeader will perform database accesses to detoast it.
That can invalidate the result of get_cached_rowtype, as documented
(perhaps not plainly enough) in that function's API spec; which leads
to strange errors or crashes when we try to use the TupleDesc to read
the tuple. In short then, trying to update a field of a composite
column could fail intermittently if the overall column value is wide
enough to require toasting.
We can fix the bug at no cost by just changing the order of
operations, since we don't need the TupleDesc until after detoasting.
(Other callers of get_cached_rowtype appear to get this right already,
so there's only one bug.)
Note that the added regression test case reveals this bug reliably
only with debug_discard_caches/CLOBBER_CACHE_ALWAYS.
Per bug #17994 from Alexander Lakhin. Sadly, this patch does not fix
the missing-values issue revealed in the bug discussion; we'll need
some more work to cover that.
Discussion: https://postgr.es/m/17994-5c7100b51b4790e9@postgresql.org
Run pgindent and pgperltidy. It seems we're still some ways
away from all committers doing this automatically. Now that
we have a buildfarm animal that will whine about poorly-indented
code, we'll try to keep the tree more tidy.
Discussion: https://postgr.es/m/3156045.1687208823@sss.pgh.pa.us
47bb9db75 modified the ApplyRetrieveRule()'s conversion of a view's
original RTE_RELATION entry into an RTE_SUBQUERY one to retain relid,
rellockmode, and perminfoindex so that the executor can lock the view
and check its permissions. It seems better to also retain
relkind for cross-checking that the exception of an
RTE_SUBQUERY entry being allowed to carry relation details only
applies to views, so do so.
Bump catversion because this changes the output format of
RTE_SUBQUERY RTEs.
Suggested-by: David Steele <david@pgmasters.net>
Reviewed-by: David Steele <david@pgmasters.net>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/3953179e-9540-e5d1-a743-4bef368785b0%40pgmasters.net
Commit fc22b6623b (generated columns) replaced ExecGetUpdatedCols() with
ExecGetAllUpdatedCols() in a couple places handling UPDATE (triggers and
lock mode). However, ExecGetUpdatedCols() did exec_rt_fetch() while
ExecGetAllUpdatedCols() also allocates memory through bms_union()
without paying attention to the memory context and happened to use the
long-lived ExecutorState, leaking the memory until the end of the query.
The amount of leaked memory is proportional to the number of (updated)
attributes, types of UPDATE triggers, and the number of processed rows
(which for UPDATE ... FROM ... may be much higher than updated rows).
Fixed by switching to the per-tuple context in GetAllUpdatedColumns().
This is fine for all in-core callers, but external callers may need to
copy the result. But we're not aware of any such callers.
Note the issue was introduced by fc22b6623b, but the macros were later
renamed by f50e888990.
Backpatch to 12, where the issue was introduced.
Reported-by: Tomas Vondra
Reviewed-by: Andres Freund, Tom Lane, Jakub Wartak
Backpatch-through: 12
Discussion: https://postgr.es/m/222a3442-7f7d-246c-ed9b-a76209d19239@enterprisedb.com
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
The idea of EvalPlanQual is that we replace the query's scan of the
result relation with a single injected tuple, and see if we get a
tuple out, thereby implying that the injected tuple still passes the
query quals. (In join cases, other relations in the query are still
scanned normally.) This logic was not updated when commit 86dc90056
made it possible for a single DML query plan to have multiple result
relations, when the query target relation has inheritance or partition
children. We replaced the output for the current result relation
successfully, but other result relations were still scanned normally;
thus, if any other result relation contained a tuple satisfying the
quals, we'd think the EPQ check passed, even if it did not pass for
the injected tuple itself. This would lead to update or delete
actions getting performed when they should have been skipped due to
a conflicting concurrent update in READ COMMITTED isolation mode.
Fix by blocking all sibling result relations from emitting tuples
during an EvalPlanQual recheck. In the back branches, the fix is
complicated a bit by the need to not change the size of struct
EPQState (else we'd have ABI-breaking changes in offsets in
struct ModifyTableState). Like the back-patches of 3f7836ff6
and 4b3e37993, add a separately palloc'd struct to avoid that.
The logic is the same as in HEAD otherwise.
This is only a live bug back to v14 where 86dc90056 came in.
However, I chose to back-patch the test cases further, on the
grounds that this whole area is none too well tested. I skipped
doing so in v11 though because none of the test applied cleanly,
and it didn't quite seem worth extra work for a branch with only
six months to live.
Per report from Ante Krešić (via Aleksander Alekseev)
Discussion: https://postgr.es/m/CAJ7c6TMBTN3rcz4=AjYhLPD_w3FFT0Wq_C15jxCDn8U4tZnH1g@mail.gmail.com
Should a hash join exceed memory limit, the hashtable is split up into
multiple batches. The number of batches is doubled each time a given
batch is determined not to fit in memory. Each batch file is allocated
with a block-sized buffer for buffering tuples and parallel hash join
has additional sharedtuplestore accessor buffers.
In some pathological cases requiring a lot of batches, often with skewed
data, bad stats, or very large datasets, users can run out-of-memory
solely from the memory overhead of all the batch files' buffers.
Batch files were allocated in the ExecutorState memory context, making
it very hard to identify when this batch explosion was the source of an
OOM. This commit allocates the batch files in a dedicated memory
context, making it easier to identify the cause of an OOM and work to
avoid it.
Based on initial draft by Tomas Vondra, with significant reworks and
improvements by Jehan-Guillaume de Rorthais.
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Author: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/20190421114618.z3mpgmimc3rmubi4@development
Discussion: https://postgr.es/m/20230504193006.1b5b9622%40karst#273020ff4061fc7a2fbb1ba96b281f17
Add a high level description of our implementation of the hybrid hash
join algorithm to the block comment in nodeHashjoin.c.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Discussion: https://postgr.es/m/20230516160051.4267a800%40karst
This is equivalent to a revert of f193883 and fb32748, with the addition
that the declaration of the SQLValueFunction node needs to gain a couple
of node_attr for query jumbling. The performance impact of removing the
function call inlining is proving to be too huge for some workloads
where these are used. A worst-case test case of involving only simple
SELECT queries with a SQL keyword is proving to lead to a reduction of
10% in TPS via pgbench and prepared queries on a high-end machine.
None of the tests I ran back for this set of changes saw such a huge
gap, but Alexander Lakhin and Andres Freund have found that this can be
noticeable. Keeping the older performance would mean to do more
inlining in the executor when using COERCE_SQL_SYNTAX for a function
expression, similarly to what SQLValueFunction does. This requires more
redesign work and there is little time until 16beta1 is released, so for
now reverting the change is the best way forward, bringing back the
previous performance.
Bump catalog version.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/b32bed1b-0746-9b20-1472-4bdc9ca66d52@gmail.com
The problem that these messages protect against can only occur because
a corrupted hash spill file was written, i.e., a Postgres bug. There's
no reason to have them as translatable.
Backpatch to 15, where these messages were changed by commit c4649cce39.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/20230510175407.dwa5v477pw62ikyx@alvherre.pgsql
RI_Initial_Check was setting up a list of RTEPermissionInfo for
ExecCheckPermissions() wrong, and the problem is subtle enough that it
doesn't have any immediate effect in core code. However, if an
extension is using the ExecutorCheckPerms_hook, then it would get the
wrong parameters and perhaps arrive at a wrong conclusion, or outright
malfunction. Fix by constructing that list and the RTE list more
honestly.
We also add an assertion check to verify that these lists match. This
new assertion would have caught this bug.
Co-authored-by: Олег Целебровский (Oleg Tselebrovskii) <o.tselebrovskiy@postgrespro.ru>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/3722b7a2cbe27a1796ee40824bd86dd1@postgrespro.ru
The leak would show up when using batch inserts with foreign tables
included in a partition tree, as the slots used in the batch were not
reset once processed. In order to fix this problem, some
ExecClearTuple() are added to clean up the slots used once a batch is
filled and processed, mapping with the number of slots currently in use
as tracked by the counter ri_NumSlots.
This buffer refcount leak has been introduced in b676ac4 with the
addition of the executor facility to improve bulk inserts for FDWs, so
backpatch down to 14.
Alexander has provided the patch (slightly modified by me). The test
for postgres_fdw comes from me, based on the test case that the author
has sent in the report.
Author: Alexander Pyhalov
Discussion: https://postgr.es/m/b035780a740efd38dc30790c76927255@postgrespro.ru
Backpatch-through: 14
The name of this function suggests that it ought to reparent R/W
expanded objects to be children of the persistent aggcontext, instead
of copying them. In fact it does no such thing, and if you try to
make it do so you will see multiple regression failures. Rename it
to the less-misleading ExecAggCopyTransValue, and add commentary
about why that attractive-sounding optimization won't work. Also
adjust comments at call sites, some of which were describing logic
that has since been moved into ExecAggCopyTransValue.
Discussion: https://postgr.es/m/3004282.1681930251@sss.pgh.pa.us
This fixes many spelling mistakes in comments, but a few references to
invalid parameter names, function names and option names too in comments
and also some in string constants
Also, fix an #undef that was undefining the incorrect definition
Author: Alexander Lakhin
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/d5f68d19-c0fc-91a9-118d-7c6a5a3f5fad@gmail.com
The finalfunc might return a read-write expanded object. If we
de-duplicate multiple call sites for the aggregate, any function(s)
receiving the aggregate result earlier could alter or destroy the
value that reaches the ones called later. This is a brown-paper-bag
bug in commit 42b746d4c, because we actually considered the need
for read-only-ness but failed to realize that it applied to the case
with a finalfunc as well as the case without.
Per report from Justin Pryzby. New error in HEAD,
no need for back-patch.
Discussion: https://postgr.es/m/ZDm5TuKsh3tzoEjz@telsasoft.com
Commit 3e310d837 taught isAssignmentIndirectionExpr() to look through
CoerceToDomain nodes. That's not sufficient, because since commit
04fe805a1 it's been possible for the planner to simplify
CoerceToDomain to RelabelType when the domain has no constraints
to enforce. So we need to look through RelabelType too.
Per bug #17897 from Alexander Lakhin. Although 3e310d837 was
back-patched to v11, it seems sufficient to apply this change
to v12 and later, since 04fe805a1 came in in v12.
Dmitry Dolgov
Discussion: https://postgr.es/m/17897-4216c546c3874044@postgresql.org
Hash join tuples reuse the HOT status bit to indicate match status
during hash join execution. Correct reuse requires clearing the bit in
all tuples. Serial hash join and parallel multi-batch hash join do so
upon inserting the tuple into the hashtable. Single batch parallel hash
join and batch 0 of unexpected multi-batch hash joins forgot to do this.
It hadn't come up before because hashtable tuple match bits are only
used for right and full outer joins and parallel ROJ and FOJ were
unsupported. 11c2d6fdf5 introduced support for parallel ROJ/FOJ but
neglected to ensure the match bits were reset.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reported-by: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/flat/CAMbWs48Nde1Mv%3DBJv6_vXmRKHMuHZm2Q_g4F6Z3_pn%2B3EV6BGQ%40mail.gmail.com
We can't assert that we're the only process attached to a barrier after
BarrierArriveAndDetachExceptLast(). Although that'll be true almost
always, a late-starting parallel worker can attach very briefly (that
is, immediately detach after checking the phase) right at that moment.
BarrierArriveAndDetachExceptLast() already contains an assertion like
that, but it holds a spinlock preventing the race. This thinko caused a
one-off failure on build farm animal chimaera.
Diagnosed-by: Melanie Plageman <melanieplageman@gmail.com>
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/3590249.1680971629@sss.pgh.pa.us
pg_stat_statements relies on EState->es_processed to count the number of
rows processed by ExecutorRun(). This proves to be a problem under the
extended query protocol when the result of a query is fetched through
more than one call of ExecutorRun(), as es_processed is reset each time
ExecutorRun() is called. This causes pg_stat_statements to report the
number of rows calculated in the last execute fetch, rather than the
global sum of all the rows processed.
As pquery.c tells, this is a problem when a portal does not use
holdStore. For example, DMLs with RETURNING would report a correct
tuple count as these do one execution cycle when the query is first
executed to fill in the portal's store with one ExecutorRun(), feeding
on the portal's store for each follow-up execute fetch depending on the
fetch size requested by the client.
The fix proposed for this issue is simple with the addition of an extra
counter in EState that's preserved across multiple ExecutorRun() calls,
incremented with the value calculated in es_processed. This approach is
not back-patchable, unfortunately.
Note that libpq does not currently give any way to control the fetch
size when using the extended v3 protocol, meaning that in-core testing
is not possible yet. This issue can be easily verified with the JDBC
driver, though, with *autocommit disabled*. Hence, having in-core tests
requires more features, left for future discussion:
- At least two new libpq routines splitting PQsendQueryGuts(), one for
the bind/describe and a second for a series of execute fetches with a
custom fetch size, likely in a fashion similar to what JDBC does.
- A psql meta-command for the execute phase. This part is not strictly
mandatory, still it could be handy.
Reported-by: Andrew Dunstan (original discovery by Simon Siggs)
Author: Sami Imseih
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/EBE6C507-9EB6-4142-9E4D-38B1673363A7@amazon.com
Discussion: https://postgr.es/m/c90890e7-9c89-c34f-d3c5-d5c763a34bd8@dunslane.net
Merge and hash joins can support antijoin with the non-nullable input
on the right, using very simple combinations of their existing logic
for right join and anti join. This gives the planner more freedom
about how to order the join. It's particularly useful for hash join,
since we may now have the option to hash the smaller table instead
of the larger.
Richard Guo, reviewed by Ronan Dunklau and myself
Discussion: https://postgr.es/m/CAMbWs48xh9hMzXzSy3VaPzGAz+fkxXXTUbCLohX1_L8THFRm2Q@mail.gmail.com
This patch introduces the SQL standard IS JSON predicate. It operates
on text and bytea values representing JSON, as well as on the json and
jsonb types. Each test has IS and IS NOT variants and supports a WITH
UNIQUE KEYS flag. The tests are:
IS JSON [VALUE]
IS JSON ARRAY
IS JSON OBJECT
IS JSON SCALAR
These should be self-explanatory.
The WITH UNIQUE KEYS flag makes these return false when duplicate keys
exist in any object within the value, not necessarily directly contained
in the outermost object.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/CAF4Au4w2x-5LTnN_bxky-mq4=WOqsGsxSpENCzHRAzSnEd8+WQ@mail.gmail.com
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Full and right outer joins were not supported in the initial
implementation of Parallel Hash Join because of deadlock hazards (see
discussion). Therefore FULL JOIN inhibited parallelism, as the other
join strategies can't do that in parallel either.
Add a new PHJ phase PHJ_BATCH_SCAN that scans for unmatched tuples on
the inner side of one batch's hash table. For now, sidestep the
deadlock problem by terminating parallelism there. The last process to
arrive at that phase emits the unmatched tuples, while others detach and
are free to go and work on other batches, if there are any, but
otherwise they finish the join early.
That unfairness is considered acceptable for now, because it's better
than no parallelism at all. The build and probe phases are run in
parallel, and the new scan-for-unmatched phase, while serial, is usually
applied to the smaller of the two relations and is either limited by
some multiple of work_mem, or it's too big and is partitioned into
batches and then the situation is improved by batch-level parallelism.
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2BA6ftXPz4oe92%2Bx8Er%2BxpGZqto70-Q_ERwRaSyA%3DafNg%40mail.gmail.com
The tts_flag is named TTS_FLAG_SHOULDFREE, so use that instead of
TTS_SHOULDFREE, which is the name of the macro that checks for that flag.
Additionally, 4da597edf got rid of the TupleTableSlot.tts_tuple field but
forgot to update a comment which referenced that field. Fix that.
Reported-by: Zhen Mingyang <zhenmingyang@yeah.net>
Reported-by: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/1a96696c.9d3.187193989c3.Coremail.zhenmingyang@yeah.net
This commit introduces the SQL/JSON standard-conforming constructors for
JSON types:
JSON_ARRAY()
JSON_ARRAYAGG()
JSON_OBJECT()
JSON_OBJECTAGG()
Most of the functionality was already present in PostgreSQL-specific
functions, but these include some new functionality such as the ability
to skip or include NULL values, and to allow duplicate keys or throw
error when they are found, as well as the standard specified syntax to
specify output type and format.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Amit Langote <amitlangote09@gmail.com>
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/CAF4Au4w2x-5LTnN_bxky-mq4=WOqsGsxSpENCzHRAzSnEd8+WQ@mail.gmail.com
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
In ancient times, these belonged to arguments or fields that were
actually of type long, but now they are not anymore, so this "L"
decoration is just confusing. (Some other 0L and other "L" constants
remain, where they are actually associated with a long type.)
The nested-arrays code path in ExecEvalArrayExpr() used palloc to
allocate the result array, whereas every other array-creating function
has used palloc0 since 18c0b4ecc. This mostly works, but unused bits
past the end of the nulls bitmap may end up undefined. That causes
valgrind complaints with -DWRITE_READ_PARSE_PLAN_TREES, and could
cause planner misbehavior as cited in 18c0b4ecc. There seems no very
good reason why we should strive to avoid palloc0 in just this one case,
so fix it the easy way with s/palloc/palloc0/.
While looking at that I noted that we also failed to check for overflow
of "nbytes" and "nitems" while summing the sizes of the sub-arrays,
potentially allowing a crash due to undersized output allocation.
For "nbytes", follow the policy used by other array-munging code of
checking for overflow after each addition. (As elsewhere, the last
addition of the array's overhead space doesn't need an extra check,
since palloc itself will catch a value between 1Gb and 2Gb.)
For "nitems", there's no very good reason to sum the inputs at all,
since we can perfectly well use ArrayGetNItems' result instead of
ignoring it.
Per discussion of this bug, also remove redundant zeroing of the
nulls bitmap in array_set_element and array_set_slice.
Patch by Alexander Lakhin and myself, per bug #17858 from Alexander
Lakhin; thanks also to Richard Guo. These bugs are a dozen years old,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17858-8fd287fd3663d051@postgresql.org
When extracting an attr from a cached tuple in the syscache with
SysCacheGetAttr the isnull parameter must be checked in case the
attr cannot be NULL. For cases when this is known beforehand, a
wrapper is introduced which perform the errorhandling internally
on behalf of the caller, invoking an elog in case of a NULL attr.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/AD76405E-DB45-46B6-941F-17B1EB3A9076@yesql.se
This provides a very simple way to see the generic plan for a
parameterized query. Without this, it's necessary to define
a prepared statement and temporarily change plan_cache_mode,
which is a bit tedious.
One thing that's a bit of a hack perhaps is that we disable
execution-time partition pruning when the GENERIC_PLAN option
is given. That's because the pruning code may attempt to
fetch the value of one of the parameters, which would fail.
Laurenz Albe, reviewed by Julien Rouhaud, Christoph Berg,
Michel Pelletier, Jim Jones, and myself
Discussion: https://postgr.es/m/0a29b954b10b57f0d135fe12aa0909bd41883eb0.camel@cybertec.at
We fail to apply updates and deletes when the REPLICA IDENTITY FULL is
used for the table having generated columns. We didn't use to ignore
generated columns while doing tuple comparison among the tuples from
the publisher and subscriber during apply of updates and deletes.
Author: Onder Kalaci
Reviewed-by: Shi yu, Amit Kapila
Backpatch-through: 12
Discussion: https://postgr.es/m/CACawEhVQC9WoofunvXg12aXtbqKnEgWxoRx3+v8q32AWYsdpGg@mail.gmail.com
* Commit 3048898e dropped -ING from PHJ wait event names. Update the
corresponding barrier phases names to match.
* Rename the "DONE" phases to "FREE". That's symmetrical with
"ALLOCATE", and names the activity that actually happens in that phase
(as we do for the other phases) rather than a state. The bug fixed by
commit 8d578b9b might have been more obvious with this name.
* Rename the batch/bucket growth barriers' "ALLOCATE" phases to
"REALLOCATE", a better description of what they do.
* Update the high level comments about phases to highlight phases
are executed by a single process with an asterisk (mostly memory
management phases).
No behavior change, as this is just improving internal identifiers. The
only user-visible sign of this is that a couple of wait events' display
names change from "...Allocate" to "...Reallocate" in pg_stat_activity,
to stay in sync with the internal names.
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2BMDpwF2Eo2LAvzd%3DpOh81wUTsrwU1uAwR-v6OGBB6%2B7g%40mail.gmail.com
Currently, in read committed transaction isolation mode (default), we have the
following sequence of actions when tuple_update()/tuple_delete() finds
the tuple updated by concurrent transaction.
1. Attempt to update/delete tuple with tuple_update()/tuple_delete(), which
returns TM_Updated.
2. Lock tuple with tuple_lock().
3. Re-evaluate plan qual (recheck if we still need to update/delete and
calculate the new tuple for update).
4. Second attempt to update/delete tuple with tuple_update()/tuple_delete().
This attempt should be successful, since the tuple was previously locked.
This patch eliminates step 2 by taking the lock during first
tuple_update()/tuple_delete() call. Heap table access method saves some
efforts by checking the updated tuple once instead of twice. Future
undo-based table access methods, which will start from the latest row version,
can immediately place a lock there.
The code in nodeModifyTable.c is simplified by removing the nested switch/case.
Discussion: https://postgr.es/m/CAPpHfdua-YFw3XTprfutzGp28xXLigFtzNbuFY8yPhqeq6X5kg%40mail.gmail.com
Reviewed-by: Aleksander Alekseev, Pavel Borisov, Vignesh C, Mason Sharp
Reviewed-by: Andres Freund, Chris Travers
When we lock tuple using table_tuple_lock() then we at the same time fetch
the locked tuple to the slot. In this case we can skip extra
table_tuple_fetch_row_version() thank to we've already fetched the 'old' tuple
and nobody can change it concurrently since it's locked.
Discussion: https://postgr.es/m/CAPpHfdua-YFw3XTprfutzGp28xXLigFtzNbuFY8yPhqeq6X5kg%40mail.gmail.com
Reviewed-by: Aleksander Alekseev, Pavel Borisov, Vignesh C, Mason Sharp
Reviewed-by: Andres Freund, Chris Travers
We fail to apply updates and deletes when the REPLICA IDENTITY FULL is
used for the table having dropped columns. We didn't use to ignore dropped
columns while doing tuple comparison among the tuples from the publisher
and subscriber during apply of updates and deletes.
Author: Onder Kalaci, Shi yu
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CACawEhVQC9WoofunvXg12aXtbqKnEgWxoRx3+v8q32AWYsdpGg@mail.gmail.com
With unlucky timing and parallel_leader_participation=off (not the
default), PHJ could attempt to access per-batch shared state just as it
was being freed. There was code intended to prevent that by checking
for a cleared pointer, but it was racy. Fix, by introducing an extra
barrier phase. The new phase PHJ_BUILD_RUNNING means that it's safe to
access the per-batch state to find a batch to help with, and
PHJ_BUILD_DONE means that it is too late. The last to detach will free
the array of per-batch state as before, but now it will also atomically
advance the phase, so that late attachers can avoid the hazard. This
mirrors the way per-batch hash tables are freed (see phases
PHJ_BATCH_PROBING and PHJ_BATCH_DONE).
An earlier attempt to fix this (commit 3b8981b6, later reverted) missed
one special case. When the inner side is empty (the "empty inner
optimization), the build barrier would only make it to
PHJ_BUILD_HASHING_INNER phase before workers attempted to detach from
the hashtable. In that case, fast-forward the build barrier to
PHJ_BUILD_RUNNING before proceeding, so that our later assertions hold
and we can still negotiate who is cleaning up.
Revealed by build farm failures, where BarrierAttach() failed a sanity
check assertion, because the memory had been clobbered by dsa_free().
In non-assert builds, the result could be a segmentation fault.
Back-patch to all supported releases.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reported-by: Michael Paquier <michael@paquier.xyz>
Reported-by: David Geier <geidav.pg@gmail.com>
Tested-by: David Geier <geidav.pg@gmail.com>
Discussion: https://postgr.es/m/20200929061142.GA29096%40paquier.xyz
When determining whether an index update may be skipped by using HOT, we
can ignore attributes indexed by block summarizing indexes without
references to individual tuples that need to be cleaned up.
A new type TU_UpdateIndexes provides a signal to the executor to
determine which indexes to update - no indexes, all indexes, or only the
summarizing indexes.
This also removes rd_indexattr list, and replaces it with rd_attrsvalid
flag. The list was not used anywhere, and a simple flag is sufficient.
This was originally committed as 5753d4ee32, but then got reverted by
e3fcca0d0d because of correctness issues.
Original patch by Josef Simanek, various fixes and improvements by Tomas
Vondra and me.
Authors: Matthias van de Meent, Josef Simanek, Tomas Vondra
Reviewed-by: Tomas Vondra, Alvaro Herrera
Discussion: https://postgr.es/m/05ebcb44-f383-86e3-4f31-0a97a55634cf@enterprisedb.com
Discussion: https://postgr.es/m/CAFp7QwpMRGcDAQumN7onN9HjrJ3u4X3ZRXdGFT0K5G2JWvnbWg%40mail.gmail.com
When probing the Memoize cache to check if the current cache key values
exist in the cache, we perform an evaluation of the expressions making up
the cache key before probing the hash table for those values. This
operation could leak memory as it is possible that the cache key is an
expression which requires allocation of memory, as was the case in bug
17844.
Here we fix this by correctly switching to the per tuple context before
evaluating the cache expressions so that the memory is freed next time the
per tuple context is reset.
Bug: 17844
Reported-by: Alexey Ermakov
Discussion: https://postgr.es/m/17844-d2f6f9e75a622bed@postgresql.org
Backpatch-through: 14, where Memoize was introduced
This adds the ability to pretty-print XML documents ... according to
libxml's somewhat idiosyncratic notions of what's pretty, anyway.
One notable divergence from a strict reading of the spec is that
libxml is willing to collapse empty nodes "<node></node>" to just
"<node/>", whereas SQL and the underlying XML spec say that this
option should only result in whitespace tweaks. Nonetheless,
it seems close enough to justify using the SQL-standard syntax.
Jim Jones, reviewed by Peter Smith and myself
Discussion: https://postgr.es/m/2f5df461-dad8-6d7d-4568-08e10608a69b@uni-muenster.de
Using REPLICA IDENTITY FULL on the publisher can lead to a full table scan
per tuple change on the subscription when REPLICA IDENTITY or PK index is
not available. This makes REPLICA IDENTITY FULL impractical to use apart
from some small number of use cases.
This patch allows using indexes other than PRIMARY KEY or REPLICA
IDENTITY on the subscriber during apply of update/delete. The index that
can be used must be a btree index, not a partial index, and it must have
at least one column reference (i.e. cannot consist of only expressions).
We can uplift these restrictions in the future. There is no smart
mechanism to pick the index. If there is more than one index that
satisfies these requirements, we just pick the first one. We discussed
using some of the optimizer's low-level APIs for this but ruled it out
as that can be a maintenance burden in the long run.
This patch improves the performance in the vast majority of cases and the
improvement is proportional to the amount of data in the table. However,
there could be some regression in a small number of cases where the indexes
have a lot of duplicate and dead rows. It was discussed that those are
mostly impractical cases but we can provide a table or subscription level
option to disable this feature if required.
Author: Onder Kalaci, Amit Kapila
Reviewed-by: Peter Smith, Shi yu, Hou Zhijie, Vignesh C, Kuroda Hayato, Amit Kapila
Discussion: https://postgr.es/m/CACawEhVLqmAAyPXdHEPv1ssU2c=dqOniiGz7G73HfyS7+nGV4w@mail.gmail.com
This ensures that the row count in the command tag for a MERGE is
correctly computed in the case where UPDATEs or DELETEs are skipped
due to a BEFORE ROW trigger returning NULL (the INSERT case was
already handled correctly by ExecMergeNotMatched() calling
ExecInsert()).
Back-patch to v15, where MERGE was introduced.
Discussion: https://postgr.es/m/CAEZATCU8XEmR0JWKDtyb7iZ%3DqCffxS9uyJt0iOZ4TV4RT%2Bow1w%40mail.gmail.com
