lookup info in the relcache for index access method support functions.
This makes a huge difference for dynamically loaded support functions,
and should save a few cycles even for built-in ones. Also tweak dfmgr.c
so that load_external_function is called only once, not twice, when
doing fmgr_info for a dynamically loaded function. All per performance
gripe from Teodor Sigaev, 5-Oct-01.
time zones.
SQL99 spec requires a default of zero (round to seconds) which is set
in gram.y as typmod is set in the parse tree. We *could* change to a
default of either 6 (for internal compatibility with previous versions)
or 2 (for external compatibility with previous versions).
Evaluate entries in pg_proc wrt the iscachable attribute for timestamp and
other date/time types. Try to recognize cases where side effects like the
current time zone setting may have an effect on results to decide whether
something is cachable or not.
Define a new function, GetCurrentTransactionStartTimeUsec() to get the time
to this precision.
Allow now() and timestamp 'now' to use this higher precision result so
we now have fractional seconds in this "constant".
Add timestamp without time zone type.
Move previous timestamp type to timestamp with time zone.
Accept another ISO variant for date/time values: yyyy-mm-ddThh:mm:ss
(note the "T" separating the day from hours information).
Remove 'current' from date/time types; convert to 'now' in input.
Separate time and timetz regression tests.
Separate timestamp and timestamptz regression test.
>
> 1. Now outputs '\\' instead of '\134' when using encode(bytea, 'escape')
> Note that I ended up leaving \0 as \000 so that there are no ambiguities
> when decoding something like, for example, \0123.
>
> 2. Fixed bug in byteain which allowed input values which were not valid
> octals (e.g. \789), to be parsed as if they were octals.
>
> Joe
>
Here's rev 2 of the bytea string support patch. Changes:
1. Added missing declaration for MatchBytea function
2. Added PQescapeBytea to fe-exec.c
3. Applies cleanly on cvs tip from this afternoon
I'm hoping that someone can review/approve/apply this before beta starts, so
I guess I'd vote (not that it counts for much) to delay beta a few days :-)
Joe Conway
Assign the fixed user id 1 to the user created by initdb.
A stand-alone backend will always set the user id to 1.
(Consequently, the name of that user is no longer important.)
In stand-alone mode, the user id 1 will have implicit superuser
status, to allow repairs even if there are no users defined.
Print a warning message when starting in stand-alone mode when no
users are defined.
Disallow dropping the current user and session user.
Granting/revoking superuser status also grants/revokes usecatupd.
(Previously, it would never grant it back. This could lead to "deadlocks".)
CREATE USER and CREATE GROUP will start allocating user ids at 100
(unless explicitly specified), to prevent accidental creation of a
superuser (plus some room for future extensions).
We will no longer try to send elog messages to the client before we have
initialized backend libpq (oops); however, reporting bogus commandline
switches via elog does work now (not irrelevant, because of PGOPTIONS).
Fix problem with inappropriate sending of checkpoint-process messages
to stderr.
-------------------------------------------------------------------
Subject: Re: [PATCHES] encoding names
From: Karel Zak <zakkr@zf.jcu.cz>
To: Peter Eisentraut <peter_e@gmx.net>
Cc: pgsql-patches <pgsql-patches@postgresql.org>
Date: Fri, 31 Aug 2001 17:24:38 +0200
On Thu, Aug 30, 2001 at 01:30:40AM +0200, Peter Eisentraut wrote:
> > - convert encoding 'name' to 'id'
>
> I thought we decided not to add functions returning "new" names until we
> know exactly what the new names should be, and pending schema
Ok, the patch not to add functions.
> better
>
> ...(): encoding name too long
Fixed.
I found new bug in command/variable.c in parse_client_encoding(), nobody
probably never see this error:
if (pg_set_client_encoding(encoding))
{
elog(ERROR, "Conversion between %s and %s is not supported",
value, GetDatabaseEncodingName());
}
because pg_set_client_encoding() returns -1 for error and 0 as true.
It's fixed too.
IMHO it can be apply.
Karel
PS:
* following files are renamed:
src/utils/mb/Unicode/KOI8_to_utf8.map -->
src/utils/mb/Unicode/koi8r_to_utf8.map
src/utils/mb/Unicode/WIN_to_utf8.map -->
src/utils/mb/Unicode/win1251_to_utf8.map
src/utils/mb/Unicode/utf8_to_KOI8.map -->
src/utils/mb/Unicode/utf8_to_koi8r.map
src/utils/mb/Unicode/utf8_to_WIN.map -->
src/utils/mb/Unicode/utf8_to_win1251.map
* new file:
src/utils/mb/encname.c
* removed file:
src/utils/mb/common.c
--
Karel Zak <zakkr@zf.jcu.cz>
http://home.zf.jcu.cz/~zakkr/
C, PostgreSQL, PHP, WWW, http://docs.linux.cz, http://mape.jcu.cz
- new millisecond (ms) and microsecond (us) support
- more robus parsing from string - used is separator checking for
non-exact formats like to_date('2001-9-1', 'YYYY-MM-DD')
- SGML docs are included
Karel Zak
If there's anyone out there who's actually using datatype-defined
default values, this will be an incompatible change in behavior ...
but the old behavior was so broken that I doubt anyone was using it.
buffer manager with 'pg_clog', a specialized access method modeled
on pg_xlog. This simplifies startup (don't need to play games to
open pg_log; among other things, OverrideTransactionSystem goes away),
should improve performance a little, and opens the door to recycling
commit log space by removing no-longer-needed segments of the commit
log. Actual recycling is not there yet, but I felt I should commit
this part separately since it'd still be useful if we chose not to
do transaction ID wraparound.
pgsql-hackers. pg_opclass now has a row for each opclass supported by each
index AM, not a row for each opclass name. This allows pg_opclass to show
directly whether an AM supports an opclass, and furthermore makes it possible
to store additional information about an opclass that might be AM-dependent.
pg_opclass and pg_amop now store "lossy" and "haskeytype" information that we
previously expected the user to remember to provide in CREATE INDEX commands.
Lossiness is no longer an index-level property, but is associated with the
use of a particular operator in a particular index opclass.
Along the way, IndexSupportInitialize now uses the syscaches to retrieve
pg_amop and pg_amproc entries. I find this reduces backend launch time by
about ten percent, at the cost of a couple more special cases in catcache.c's
IndexScanOK.
Initial work by Oleg Bartunov and Teodor Sigaev, further hacking by Tom Lane.
initdb forced.
has an alias SERIAL4 and a sister SERIAL8. SERIAL8 is just the same
except the created column is type int8 not int4.
initdb forced. Note this also breaks any chance of pg_upgrade from 7.1,
unless we hack up pg_upgrade to drop and recreate sequences. (Which is
not out of the question, but I don't wanna do it.)
for speed reasons; its result type also changes to int8. avg() on these
datatypes now accumulates the running sum in int8 for speed; but we still
deliver the final result as numeric, so that fractional accuracy is
preserved.
count() now counts and returns in int8, not int4. I am a little nervous
about this possibly breaking users' code, but there didn't seem to be
a strong sentiment for avoiding the problem. If we get complaints during
beta, we can change count back to int4 and add a "count8" aggregate.
For that matter, users can do it for themselves with a simple CREATE
AGGREGATE command; the int4inc function is still present, so no C hacking
is needed.
Also added max() and min() aggregates for OID that do proper unsigned
comparison, instead of piggybacking on int4 aggregates.
initdb forced.
default, but OIDS are removed from many system catalogs that don't need them.
Some interesting side effects: TOAST pointers are 20 bytes not 32 now;
pg_description has a three-column key instead of one.
Bugs fixed in passing: BINARY cursors work again; pg_class.relhaspkey
has some usefulness; pg_dump dumps comments on indexes, rules, and
triggers in a valid order.
initdb forced.
Note: I didn't force an initdb, figuring that one today was enough.
However, there is a new function in pg_proc.h, and pg_dump won't be
able to dump partial indexes until you add that function.
per previous discussion on pghackers. Most of the duplicate code in
different AMs' ambuild routines has been moved out to a common routine
in index.c; this means that all index types now do the right things about
inserting recently-dead tuples, etc. (I also removed support for EXTEND
INDEX in the ambuild routines, since that's about to go away anyway, and
it cluttered the code a lot.) The retail indextuple deletion routines have
been replaced by a "bulk delete" routine in which the indexscan is inside
the access method. I haven't pushed this change as far as it should go yet,
but it should allow considerable simplification of the internal bookkeeping
for deletions. Also, add flag columns to pg_am to eliminate various
hardcoded tests on AM OIDs, and remove unused pg_am columns.
Fix rtree and gist index types to not attempt to store NULLs; before this,
gist usually crashed, while rtree managed not to crash but computed wacko
bounding boxes for NULL entries (which might have had something to do with
the performance problems we've heard about occasionally).
Add AtEOXact routines to hash, rtree, and gist, all of which have static
state that needs to be reset after an error. We discovered this need long
ago for btree, but missed the other guys.
Oh, one more thing: concurrent VACUUM is now the default.
tests to return the correct results per SQL9x when given NULL inputs.
Reimplement these tests as well as IS [NOT] NULL to have their own
expression node types, instead of depending on special functions.
From Joe Conway, with a little help from Tom Lane.
rules and triggers by OID. So, even though we have no cross-references
in the system catalogs to pg_rewrite.oid or pg_trigger.oid, we'd better
have unique indexes on them. Put back pg_rewrite_oid_index, which I
mistakenly removed a few days ago, and add pg_trigger_oid_index.
Tom Lane). For the moment, only the OID/name variants are provided.
I didn't force initdb, but the additions to the 'privileges' regress
test won't pass until you do one.
database, including system catalogs (but not the shared catalogs,
since they don't really belong to his database). This is per recent
mailing list discussion. Clean up some other code that also checks
for database ownerness by introducing a test function is_dbadmin().
inet(text), cidr(text): convert a text value into inet/cidr
set_masklen(inet): set masklen on the inet value
Patch also contains regression checks for these functions.
Alex Pilosov
It "make"s and "make check"s clean against current cvs tip.
There are now both Text and Name variants, and the regression test support
is rolled into the patch. Note that to be complete wrt Name based variants,
there are now 12 user visible versions of has_table_privilege:
has_table_privilege(Text usename, Text relname, Text priv_type)
has_table_privilege(Text usename, Name relname, Text priv_type)
has_table_privilege(Name usename, Text relname, Text priv_type)
has_table_privilege(Name usename, Name relname, Text priv_type)
has_table_privilege(Text relname, Text priv_type) /* assumes current_user */
has_table_privilege(Name relname, Text priv_type) /* assumes current_user */
has_table_privilege(Text usename, Oid reloid, Text priv_type)
has_table_privilege(Name usename, Oid reloid, Text priv_type)
has_table_privilege(Oid reloid, Text priv_type) /* assumes current_user */
has_table_privilege(Oid usesysid, Text relname, Text priv_type)
has_table_privilege(Oid usesysid, Name relname, Text priv_type)
has_table_privilege(Oid usesysid, Oid reloid, Text priv_type)
For the Text based inputs, a new internal function, get_Name is used
(shamelessly copied from get_seq_name in sequence.c) to downcase if not
quoted, or remove quotes if quoted, and truncate. I also added a few test
cases for the downcasing, quote removal, and Name based variants to the
regression test.
Joe Conway
pg_database now has unique indexes on oid and on datname.
pg_shadow now has unique indexes on usename and on usesysid.
pg_am now has unique index on oid.
pg_opclass now has unique index on oid.
pg_amproc now has unique index on amid+amopclaid+amprocnum.
Remove pg_rewrite's unnecessary index on oid, delete unused RULEOID syscache.
Remove index on pg_listener and associated syscache for performance reasons
(caching rows that are certain to change before you need 'em again is
rather pointless).
Change pg_attrdef's nonunique index on adrelid into a unique index on
adrelid+adnum.
Fix various incorrect settings of pg_class.relisshared, make that the
primary reference point for whether a relation is shared or not.
IsSharedSystemRelationName() is now only consulted to initialize relisshared
during initial creation of tables and indexes. In theory we might now
support shared user relations, though it's not clear how one would get
entries for them into pg_class &etc of multiple databases.
Fix recently reported bug that pg_attribute rows created for an index all have
the same OID. (Proof that non-unique OID doesn't matter unless it's
actually used to do lookups ;-))
There's no need to treat pg_trigger, pg_attrdef, pg_relcheck as bootstrap
relations. Convert them into plain system catalogs without hardwired
entries in pg_class and friends.
Unify global.bki and template1.bki into a single init script postgres.bki,
since the alleged distinction between them was misleading and pointless.
Not to mention that it didn't work for setting up indexes on shared
system relations.
Rationalize locking of pg_shadow, pg_group, pg_attrdef (no need to use
AccessExclusiveLock where ExclusiveLock or even RowExclusiveLock will do).
Also, hold locks until transaction commit where necessary.
basically want your guys feedback. I have sprinkled some of my q's thru
the text delimited with the @@ symbol. It seems to work perfectly.
[ Removed @@ comments because patch was reviewed. ]
At the moment it does CHECK constraints only, with inheritance. However,
due to the problem mentioned before with the mismatching between inherited
constraints it may be wise to disable the inheritance feature for a while.
it is written in an extensible fashion to support future dropping of other
types of constraint, and is well documented.
Please send me your comments, check my use of locking, updating of
indices, use of ERROR and NOTICE, etc. and I will rework the patch based
on feedback until everyone
is happy with it...
Christopher Kings
to do that, but inconsistently.) Make bit type reject too short input,
too, per SQL. Since it no longer zero pads, 'zpbit*' has been renamed to
'bit*' in the source, hence initdb.
- New functions to create a portal using a prepared/saved
SPI plan or lookup an existing portal by name.
- Functions to fetch/move from/in portals. Results are placed
in the usual SPI_processed and SPI_tuptable, so the entire
set of utility functions can be used to gain attribute access.
- Prepared/saved SPI plans now use their own memory context
and SPI_freeplan(plan) can remove them.
- Tuple result sets (SPI_tuptable) now uses it's own memory
context and can be free'd by SPI_freetuptable(tuptab).
Enhancement of PL/pgSQL
- Uses generic named portals internally in FOR ... SELECT
loops to avoid running out of memory on huge result sets.
- Support for CURSOR and REFCURSOR syntax using the new SPI
functionality. Cursors used internally only need no explicit
transaction block. Refcursor variables can be used inside
of explicit transaction block to pass cursors between main
application and functions.
Jan
create_index_paths are not immediately discarded, but are available for
subsequent planner work. This allows avoiding redundant syscache lookups
in several places. Change interface to operator selectivity estimation
procedures to allow faster and more flexible estimation.
Initdb forced due to change of pg_proc entries for selectivity functions!
