This patch forces the use of 'DROP VIEW' to destroy views.
It also changes the syntax of DROP VIEW to
DROP VIEW v1, v2, ...
to match the syntax of DROP TABLE.
Some error messages were changed so this patch also includes changes to the
appropriate expected/*.out files.
Doc changes for 'DROP TABLE" and 'DROP VIEW' are included.
--
Mark Hollomon
As a result, backend/libpq/pqcomm.c and interfaces/libpq/fe-connect.c
fail to compile.
The <netinet/tcp.h> header needs to be preceded by <netinet/in.h>, at
least on IRIX, Solaris and AIX. The simple configure test fails.
(That header on Linux is idempotent.)
The basic problem is that <netinet/tcp.h> is a BSD header. The
correct header for TCP internals such as TCP_NODELAY on a UNIX system
is <xti.h>. By UNIX I mean UNIX95 (aka XPG4v2 or SUSv1) or later.
The current UNIX standard (UNIX98 aka SUSv2) is available online at
<http://www.opengroup.org/onlinepubs/7908799/>.
The fix is to add header support for <xti.h> into configure.in and
config.h.in.
The 2 files which conditionally include <netinet/tcp.h> need also to
conditionally include <xti.h>.
Pete Forman
> > For a while I though it might be because we are using an alpha TAS in
> > the spinlock rather than the old semaphore. I replaced our spinlock
> > with the standard one and it made no difference. We have been running
> > with our spinlock implementation for nearly 2 months on a production
> > database now without a hitch, so I think it is ok. Did I ever submit
> > any patches for the Alpha spinlock?
>
> Not that I recall. We did get some advice from some Alpha gurus at DEC
> who seemed to think the existing TAS code is OK. What was it that you
> felt needed to be improved?
The current code uses semaphores, which has the advantage that it works
well even on multi-processor machines, but the disadvantage that it is not
the fastest way possible. Writing a spinlock on Alpha for SMP machines is
very difficult, as you need to deal with memory barriers. A real mess. But
then one of the people at Compaq pointed out to us that there is a
ready-made routine on Alpha. We implemented it with the two patches below.
I ran tests with lots of parallel back-ends and got around a 10% speed
increase. I include the two patches. Perhaps some of the other people
running Tru64 can have a look at these as well.
Cheers,
Adriaan Joubert
> this is patch v 0.4 to support transactions with BLOBs.
> All BLOBs are in one table. You need to make initdb.
>
> --
> Sincerely Yours,
> Denis Perchine
after that dynamic loading isn't working and shared memory handling is
broken.
Attached with this message, there is a Zip file which contain :
* beos.diff = patch file generated with difforig
* beos = folder with beos support files which need to be moved in /
src/backend/port
* expected = foler with three file for message and precision
difference in regression test
* regression.diff = rule problem (need to kill the backend manualy)
* dynloader = dynloader files (they are also in the pacth files,
but there is so much modification that I have join full files)
Everything works except a problem in 'rules' Is there some problems
with rules in the current tree ? It used to works with last week tree.
Cyril VELTER
took some rejiggering of typename and ACL parsing, as well as moving
parse_analyze call out of parser(). Restructure postgres.c processing
so that parse analysis and rewrite are skipped when in abort-transaction
state. Only COMMIT and ABORT statements will be processed beyond the raw
parser() phase. This addresses problem of parser failing with database access
errors while in aborted state (see pghackers discussions around 7/28/00).
Also fix some bugs with COMMIT/ABORT statements appearing in the middle of
a single query input string.
Function, operator, and aggregate arguments/results can now use full
TypeName production, in particular foo[] for array types.
DROP OPERATOR and COMMENT ON OPERATOR were broken for unary operators.
Allow CREATE AGGREGATE to accept unquoted numeric constants for initcond.
SQL92 semantics, including support for ALL option. All three can be used
in subqueries and views. DISTINCT and ORDER BY work now in views, too.
This rewrite fixes many problems with cross-datatype UNIONs and INSERT/SELECT
where the SELECT yields different datatypes than the INSERT needs. I did
that by making UNION subqueries and SELECT in INSERT be treated like
subselects-in-FROM, thereby allowing an extra level of targetlist where the
datatype conversions can be inserted safely.
INITDB NEEDED!
working on the VERY latest version of BeOS. I'm sure there will be
alot of comments, but then if there weren't I'd be disappointed!
Thanks for your continuing efforts to get this into your tree.
Haven't bothered with the new files as they haven't changed.
BTW Peter, the compiler is "broken" about the bool define and so on.
I'm filing a bug report to try and get it addressed. Hopefully then we
can tidy up the code a bit.
I await the replies with interest :)
David Reid
problems with some bits of it, but when all the patches are in it'll build
and we can fix it from there :) I've got a version that builds and runs and
that is the basis for these patches.
The first file has the new additional files that are required,
template/beos
backend/port/dynloader/beos.c
backend/port/dynloader/beos.h
include/port/beos.h
makefiles/Makefile.beos
The second is a tarball of diffs against a few files. I've added sys/ipc.h
to configure and config.h via configure.in and config.h.in and then started
adding the check as this file isn't needed on BeOS and having loads of
#ifdef BEOS isn't as obvious as #ifdef HAVE_SYS_IPC_H and isn't as
autconf'ish :)
Files touched are
include/c.h
configure.in
include/config.h.in
include/storage/ipc.h
include/utils/int8.h
Let me know how these go. I'll await a response before submitting any more.
Any problems just get in touch.
David Reid
and the fmgr redesign.
It makes the homebrewn dl*() functions for more recent Versions of AIX
obsolete
by using the system dl*() functions instead.
It also fixes the expected file for the horology regression test.
Please regenerate configure from configure.in, I don't have the
environment/time.
Andreas
(Don't forget that an alias is required.) Views reimplemented as expanding
to subselect-in-FROM. Grouping, aggregates, DISTINCT in views actually
work now (he says optimistically). No UNION support in subselects/views
yet, but I have some ideas about that. Rule-related permissions checking
moved out of rewriter and into executor.
INITDB REQUIRED!
Update the installation instructions (formerly misnamed "FAQ"), add configure
checks for some headers rather than having users copy stubs manually (ugh!).
Use Autoconf check for exe extension. This also avoids inheriting the value
of $(X) from the environment.
complaints about ungrouped variables. This is for consistency with
behavior elsewhere, notably the fact that the relname is reported as
an alias in these same complaints. Also, it'll work with subselect-
in-FROM where old code didn't.
- rename ichar() to chr() (discussed with Tom)
- add docs for oracle compatible routines:
btrim()
ascii()
chr()
repeat()
- fix bug with timezone in to_char()
- all to_char() variants return NULL instead textin("")
if it's needful.
The contrib/odbc is without changes and contains same routines as main
tree ... because I not sure how plans are Thomas with this :-)
Karel
---------------------------------------------------------------------------
This effectively one line patch should fix the fact that
foreign key definitions in create table were erroring if
a primary key was defined. I was using the columns
list to get the columns of the table for comparison, but
it got reused as a temporary list inside the primary key
stuff.
Stephan Szabo
query representation. Note that GEQO_RELS setting is now interpreted
as the number of top-level items in the FROM list, not necessarily the
number of relations in the query. This seems appropriate since we are
only doing join-path searching over the top-level items.
There is still no effective difference but it will kick in once setuid
functions exist (not included here). Make old getpgusername() alias for
current_user.
DESTDIR=/else/where' and prepends the value of DESTDIR to the full
installation paths (e.g., /else/where/usr/local/pgsql/bin). This allows
users to install the package into a location different from the one that
was configured and hard-coded into various scripts, e.g., for creating
binary packages.
DESTDIR is in many cases preferrable over `make install
prefix=/else/where' because
a) `prefix' affects the path that is hard-coded into the files, which can
lead to a `make install prefix=xxx' (as done by the regression test
driver) corrupting the files in the source tree with wrong paths.
b) it doesn't work at all if a directory was overridden to not depend on
`prefix', e.g., --sysconfdir=/etc.
(Updating the regression test driver to use DESTDIR is a separate
undertaking.)
See also autoconf@gnu.org, From: Akim Demaille <akim@epita.fr>, Date: 08
Sep 2000 12:48:59 +0200, Message-ID:
<mv4em2vb1lw.fsf@nostromo.lrde.epita.fr>, Subject: Re: HTML format
documentation.
for views. Views are now have a "relkind" of
RELKIND_VIEW instead of RELKIND_RELATION.
Also, views no longer have actual heap storage
files.
The following changes were made
1. CREATE VIEW sets the new relkind
2. The executor complains if a DELETE or
INSERT references a view.
3. DROP RULE complains if an attempt is made
to delete a view SELECT rule.
4. CREATE RULE "_RETmytable" AS ON SELECT TO mytable DO INSTEAD ...
1. checks to make sure mytable is empty.
2. sets the relkind to RELKIND_VIEW.
3. deletes the heap storage files.
5. LOCK myview is not allowed. :)
6. the regression test type_sanity was changed to
account for the new relkind value.
7. CREATE INDEX ON myview ... is not allowed.
8. VACUUM myview is not allowed.
VACUUM automatically skips views when do the entire
database.
9. TRUNCATE myview is not allowed.
THINGS LEFT TO THINK ABOUT
o pg_views
o pg_dump
o pgsql (\d \dv)
o Do we really want to be able to inherit from views?
o Is 'DROP TABLE myview' OK?
--
Mark Hollomon
user is now defined in terms of the user id, the user name is only computed
upon request (for display purposes). This is kind of the opposite of the
previous state, which would maintain the user name and compute the user id
for permission checks.
Besides perhaps saving a few cycles (integer vs string), this now creates a
single point of attack for changing the user id during a connection, for
purposes of "setuid" functions, etc.
quote_ident(text) returns text
quote_literal(text) returns text
These are handy to build up properly quoted query strings
for the new PL/pgSQL EXECUTE functionality to submit
dynamic DDL statements.
Jan
- full support for IW (ISO week) and vice versa conversion for IW too
(the to_char 'week' support is now complete and I hope correct).
Thomas, I use for IW code from timestamp.c, for this I create separate
function date2isoweek() from original 'case DTK_WEEK:' code in the
timestamp_part(). I mean will better use one code for same feature in
date_part() and in to_char(). The isoweek2date() is added to timestamp.c
too. Right?
IMHO in 7.1 will all to_char's features complete. It is cca 41 templates
for date/time and cca 21 for numbers.
* to_ascii:
- gcc, is it correct now? :-)
In the patch is documentation for to_char's IW and for to_ascii().
Karel
length is < TOAST_TUPLE_THRESHOLD, even with toastable column types
present. For example, CREATE TABLE foo (f1 int, f2 varchar(100))
does not require a toast table, even though varchar is a toastable
type.
pg_mb2wchar(const unsigned char *, pg_wchar *);
pg_mb2wchar_with_len(const unsigned char *, pg_wchar *, int);
from void to int. Now they return the number of
wide chars.
(rather than compile time). For libpq, even when Kerberos support is
compiled in, the default user name should still fall back to geteuid()
if it can't be determined via the Kerberos system.
A couple of fixes for string type configuration parameters, now that there
is one.
for example, an SQL function can be used in a functional index. (I make
no promises about speed, but it'll work ;-).) Clean up and simplify
handling of functions returning sets.
right circumstances a hash join executed as a DECLARE CURSOR/FETCH
query would crash the backend. Problem as seen in current sources was
that the hash tables were stored in a context that was a child of
TransactionCommandContext, which got zapped at completion of the FETCH
command --- but cursor cleanup executed at COMMIT expected the tables
to still be valid. I haven't chased down the details as seen in 7.0.*
but I'm sure it's the same general problem.
pg_proc.c (where it's actually used). Fix it to correctly handle tlists
that contain resjunk target items, and improve error messages. This
addresses bug reported by Krupnikov 6-July-00.
macros where appropriate (the code used to have several different ways
of doing that, including Int32, Int8, UInt8, ...). Remove last few
references to float32 and float64 typedefs --- it's all float4/float8
now. The typedefs themselves should probably stay in c.h for a release
or two, though, to avoid breaking user-written C functions.
Update functions to new-style fmgr, make BIT and VARBIT be binary-
equivalent, add entries to allow these types to be btree indexed,
correct a few bugs. BIT/VARBIT are now toastable, too.
NOTE: initdb forced due to catalog updates.
right thing with variable-free clauses that contain noncachable functions,
such as 'WHERE random() < 0.5' --- these are evaluated once per
potential output tuple. Expressions that contain only Params are
now candidates to be indexscan quals --- for example, 'var = ($1 + 1)'
can now be indexed. Cope with RelabelType nodes atop potential indexscan
variables --- this oversight prevents 7.0.* from recognizing some
potentially indexscanable situations.
from Param nodes, per discussion a few days ago on pghackers. Add new
expression node type FieldSelect that implements the functionality where
it's actually needed. Clean up some other unused fields in Func nodes
as well.
NOTE: initdb forced due to change in stored expression trees for rules.
as MaxHeapAttributeNumber. Increase MaxAttrSize to something more
reasonable (given what it's used for, namely checking char(n) declarations,
I didn't make it the full 1G that it could theoretically be --- 10Mb
seemed a more reasonable number). Improve calculation of MaxTupleSize.
that RAND_MAX applies to them, since it doesn't. Instead add a
config.h parameter MAX_RANDOM_VALUE. This is currently set at 2^31-1
but could be auto-configured if that ever proves necessary. Also fix
some outright bugs like calling srand() where srandom() is appropriate.
rather than the "~~" operator; this made it easy to add ESCAPE features.
Implement ILIKE, NOT ILIKE, and the ESCAPE clause for them.
afaict this is not MultiByte clean, but lots of other stuff isn't either.
Fix up underlying support code for LIKE/NOT LIKE.
Things should be faster and does not require internal string copying.
Update regression test to add explicit checks for
LIKE/NOT LIKE/ILIKE/NOT ILIKE.
Remove colon and semi-colon operators as threatened in 7.0.
Implement SQL99 COMMIT/AND NO CHAIN.
Throw elog(ERROR) on COMMIT/AND CHAIN per spec
since we don't yet support it.
Implement SQL99 CREATE/DROP SCHEMA as equivalent to CREATE DATABASE.
This is only a stopgap or demo since schemas will have another
implementation soon.
Remove a few unused production rules to get rid of warnings
which crept in on the last commit.
Fix up tabbing in some places by removing embedded spaces.
that giving pg_proc a toast table required solving the same problems
we'd have to solve for pg_class --- pg_proc is one of the relations
that gets bootstrapped in relcache.c. Solution is to go back at the
end of initialization and read in the *real* pg_class row to replace
the phony entry created by formrdesc(). This should work as long as
there's no need to touch any toasted values during initialization,
which seems a reasonable assumption.
Although I did not add a toast-table for every single system table
with a varlena attribute, I believe that it would work to just do
ALTER TABLE pg_class CREATE TOAST TABLE. So anyone who's really
intent on having several thousand ACL entries for a rel could do it.
NOTE: I didn't force initdb, but you must do one to see the effects
of this patch.
thing when there are multiple result relations. Formerly, during
something like 'UPDATE foo*', foo's constraints and *only* foo's
constraints would be applied to all foo's children. Wrong-o ...
- encode 'text' from database encoding to ASCII
to_ascii('\256\341k')
to_ascii( text, int4 )
- encode 'text' from 'int4' encoding to ASCII
to_ascii('\256\341k', 8)
to_ascii( text, name )
- encode 'text' from 'name' encoding to ASCII
to_ascii('\256\341k', 'LATIN2')
Now is supported LATIN1, LATIN2, WIN1250. For other character sets I
haven't good resources. Add new encoding is easy...
If encoding is not supported returns ERROR.
Note --- not exists total corect conversion to ASCII, this function try
convert chars those is _probably_ interpret-able in ASCII for
others use ' '. But for example for all Czech characters it is
sufficient ... hmm Chinese / JAP and other complicated langs
have
bad luck here :-(
Karel
trying to toast tuples inserted into toast tables! Fix is two-pronged:
first, ensure all columns of a toast table are marked attstorage='p',
and second, alter the target chunk size so that it's less than the
threshold for trying to toast a tuple. (Code tried to do that but the
expression was wrong.) A few cosmetic cleanups in tuptoaster too.
NOTE: initdb forced due to change in toaster chunk-size.
on myself to do something about the non-self-consistency of the inet
comparison functions. The results are probably still semantically wrong
(inet and cidr should have different comparison semantics, I think)
but at least the boolean operators now agree with each other and with
the sort order of indexes on inet/cidr.
These two routines will now ALWAYS elog() on failure, whether you ask for
a lock or not. If you really want to get a NULL return on failure, call
the new routines heap_open_nofail()/heap_openr_nofail(). By my count there
are only about three places that actually want that behavior. There were
rather more than three places that were missing the check they needed to
make under the old convention :-(.
At this point I think it'd be possible to make float4 be pass-by-value
without too much work --- and float8 too on machines where Datum is
8 bytes. Something to try when the mood strikes, anyway.
(Sorry, couldn't help it...)
Removed type filename as well, since it's unused and probably useless.
INITDB FORCED, because pg_rewrite columns are now plain text again.
allows fixing problems with operators that expected to be able to
return a NULL, such as the '#' line-segment-intersection operator
that tried to return NULL when the two segments don't intersect.
(See, eg, bug report from 1-Nov-99 on pghackers.) Fix some other
bugs in passing, such as backwards comparison in path_distance().
I did not force. I marked numeric as compressable-but-not-move-off-able,
partly to test that storage mode and partly because I've got doubts
that numerics are large enough to need external storage.
the planner may try to generate them as a result of transitivity of the
existing int2-vs-int4 and int4-vs-int8 operators. In fact, it is now
necessary that mergejoinable cross-datatype operators form closed sets.
Add an opr_sanity regress test to detect missing operators.
actually, but who could understand it with no comments? Fix bug
while at it: _bt_orderkeys would try to invoke comparisons on
NULL inputs, given the right sort of redundant quals.
mergejoinable qual clauses, and add them to the query quals. For
example, WHERE a = b AND b = c will cause us to add AND a = c.
This is necessary to ensure that it's safe to use these variables
as interchangeable sort keys, which is something 7.0 knows how to do.
Should provide a useful improvement in planning ability, too.
Remove a bunch of crufty code for large-object-based arrays, which is
superseded by TOAST and likely hasn't worked in a long time anyway.
Clean up array code a little, and in particular eliminate its habit
of scribbling on the input array (ie, modifying the input tuple :-().
duplicate keys by letting search go to the left rather than right when an
equal key is seen at an upper tree level. Fix poor choice of page split
point (leading to insertion failures) that was forced by chaining logic.
Don't store leftmost key in non-leaf pages, since it's not necessary.
Don't create root page until something is first stored in the index, so an
unused index is now 8K not 16K. (Doesn't seem to be as easy to get rid of
the metadata page, unfortunately.) Massive cleanup of unreadable code,
fix poor, obsolete, and just plain wrong documentation and comments.
See src/backend/access/nbtree/README for the gory details.
The latter updated accordingly. Also add `dist' and `distcheck' targets
to play with, but caveat packager.
Updated backend/bootstrap and backend/parser makefile to make them
marginally builddir aware and fix the usual set of things.
Add rule to automatically remake config.h dependent on config.h.in and
config.status. (Adopted from Autoconf manual and about every other
package.) On a good day we should now have a complete and accurate set
of dependencies throughout everything.
There's now only one transition value and transition function.
NULL handling in aggregates is a lot cleaner. Also, use Numeric
accumulators instead of integer accumulators for sum/avg on integer
datatypes --- this avoids overflow at the cost of being a little slower.
Implement VARIANCE() and STDDEV() aggregates in the standard backend.
Also, enable new LIKE selectivity estimators by default. Unrelated
change, but as long as I had to force initdb anyway...
pass-by-ref data types --- eg, an index on lower(textfield) --- no longer
leak memory during index creation or update. Clean up a lot of redundant
code ... did you know that copy, vacuum, truncate, reindex, extend index,
and bootstrap each basically duplicated the main executor's logic for
extracting information about an index and preparing index entries?
Functional indexes should be a little faster now too, due to removal
of repeated function lookups.
CREATE INDEX 'opt_type' clause is deimplemented by these changes,
but I haven't removed it from the parser yet (need to merge with
Thomas' latest change set first).
Include updates for the comment.sql regression test.
Implement SET SESSION CHARACTERISTICS and SET DefaultXactIsoLevel.
Implement SET SESSION CHARACTERISTICS TRANSACTION COMMIT
and SET AutoCommit in the parser only.
Need to add code to actually do something.
Implement WITHOUT TIME ZONE type qualifier.
Define SCHEMA keyword, along with stubbed-out grammar.
Implement "[IN|INOUT|OUT] [varname] type" function arguments
in parser only; INOUT and OUT throws an elog(ERROR).
Add PATH as a type-specific token, since PATH is in SQL99
to support schema resource search and resolution.
* the result is not recorded anywhere
* the result is not used anywhere
* the result is only used in some places, whereas others have been getting away with it
* the result is used improperly
Also make command line options handling a little better (e.g., --disable-locale,
while redundant, should really still *dis*able).
memory contexts. Currently, only leaks in expressions executed as
quals or projections are handled. Clean up some old dead cruft in
executor while at it --- unused fields in state nodes, that sort of thing.
in-chunk leaks, overwrite-next-chunk leaks and overwrite block-freeptr leaks.
A in-chunk leak --- if something overwrite space after wanted (via palloc()
size, but it is still inside chunk. For example
x = palloc(12); /* create 16b chunk */
memset(x, '#', 13);
this leak is in the current source total invisible, because chunk is 16b and
leak is in the "align space".
For this feature I add data_size to StandardChunk, and all memory which go
from AllocSetAlloc() is marked as 0x7F.
The MemoryContextCheck() is compiled '#ifdef USE_ASSERT_CHECKING'.
I add this checking to 'tcop/postgres.c' and is active after each backend
query, but it is probably not sufficient, because some MemoryContext exist
only during memory processing --- will good if someone who known where
it is needful (Tom:-) add it for others contexts;
A problem in the current source is that we have still some malloc()
allocation that is not needful and this allocation is total invisible for
all context routines. For example Dllist in backend (pretty dirty it is in
catcache where values in Dllist are palloc-ed, but list is malloc-ed).
--- and BTW. this Dllist design stand in the way for query cache :-)
Tom, if you agree I start replace some mallocs.
BTW. --- Tom, have you idea for across transaction presistent allocation for
SQL functions? (like regex - now it is via malloc)
I almost forget. I add one if() to AllocSetAlloc(), for 'size' that are
greater than ALLOC_BIGCHUNK_LIMIT is not needful check AllocSetFreeIndex(),
because 'fidx' is always 'ALLOCSET_NUM_FREELISTS - 1'. It a little brisk up
allocation for very large chunks. Right?
Karel
* Add option to build with OpenSSL out of the box. Fix thusly exposed
bit rot. Although it compiles now, getting this to do something
useful is left as an exercise.
* Fix Kerberos options to defer checking for required libraries until
all the other libraries are checked for.
* Change default odbcinst.ini and krb5.srvtab path to PREFIX/etc.
* Install work around for Autoconf's install-sh relative path anomaly.
Get rid of old INSTL_*_OPTS variables, now that we don't need them
anymore.
* Use `gunzip -c' instead of g?zcat. Reportedly broke on AIX.
* Look for only one of readline.h or readline/readline.h, not both.
* Make check for PS_STRINGS cacheable. Don't test for the header files
separately.
* Disable fcntl(F_SETLK) test on Linux.
* Substitute the standard GCC warnings set into CFLAGS in configure,
don't add it on in Makefile.global.
* Sweep through contrib tree to teach makefiles standard semantics.
... and in completely unrelated news:
* Make postmaster.opts arbitrary options-aware. I still think we need to
save the environment as well.
backend functions via backend PQexec(). The SPI interface has long
been our only documented way to do this, and the backend pqexec/portal
code is unused and suffering bit-rot. I'm putting it out of its misery.
Does not work since it fetches one byte beyond the source data, and when
the phase of the moon is wrong, the source data is smack up against the
end of backend memory and you get SIGSEGV. Don't laugh, this is a fix
for an actual user bug report.
functional.
Handle include file installation in src/include/Makefile
genbki.sh improvements: Don't substitute anything by config.status,
instead pass in AWK and CPP through environment. Change calling
convention to support named output files, so we get to see error
messages on stderr.
Rename bootstrap template files and install them into PREFIX/share.
Update initdb to that effect and other readability improvements
in initdb.
PostgreSQL-7.0.2 run on Linux for the Intel-IA64 architecture. It also
fixes a bug in the configure scripts that caused configure to fail on
the fcntl(F_SETLK) test.
This fix triggered a bug in the fcntl(F_SETLK) code of the Linux
kernel when used on unix domain sockets resulting in postmaster to
segfault immediately after startup. There is a fix available and
included in the kernel that will be on SuSE Linux 7.0, but kernels <=
2.2.16 still have this bug.
Reinhard Max
files to restrict the set of users that can connect to a database
but can still use the pg_shadow password. (You just leave off the
password field in the secondary file.)
Don't go through pg_exec_query_dest(), but directly to the execution
routines. Also, extend parameter lists so that there's no need to
change the global setting of allowSystemTableMods, a hack that was
certain to cause trouble in the event of any error.
and config.h. Adjusted all referring code.
Scrapped pg_version and changed initdb accordingly. Integrated
src/utils/version.c into src/backend/utils/init/miscinit.c. Changed all
callers.
Set version number to `7.1devel'. (Non-numeric version suffixes now allowed.)
Don't use DISABLE_COMPLEX_MACRO on Solaris. Don't define the
replacement function in the header file. Use -KPIC, not -K PIC.
Use CC to link C++ libraries, not ld/ar.
Eliminate file not found warnings in tcl build code.
entry that has rules. This allows us to release the rule parsetrees
on relcache flush without needing a working freeObject() routine.
Formerly, the rule trees were leaked permanently at relcache flush.
Also, clean up handling of rule creation and deletion --- there was
not sufficient locking of the relation being modified, and there was
no reliable notification of other backends that a relcache reload
was needed. Also, clean up relcache.c code so that scans of system
tables needed to load a relcache entry are done in the caller's
memory context, not in CacheMemoryContext. This prevents any
un-pfreed memory from those scans from becoming a permanent memory
leak.
documentation. Let's try to keep this file a bit neater in future,
hmm? Also (to get back to the original point) update info about
FUNC_MAX_ARGS, and add additional config symbols for debugging
new memory management changes.
for details). It doesn't really do that much yet, since there are no
short-term memory contexts in the executor, but the infrastructure is
in place and long-term contexts are handled reasonably. A few long-
standing bugs have been fixed, such as 'VACUUM; anything' in a single
query string crashing. Also, out-of-memory is now considered a
recoverable ERROR, not FATAL.
Eliminate a large amount of crufty, now-dead code in and around
memory management.
Fix problem with holding off SIGTRAP, SIGSEGV, etc in postmaster and
backend startup.
option settings. Sort out SIGHUP vs BACKEND -- there is no total ordering
here, so make explicit checks. Add comments explaining all of this.
Removed permissions check on SHOW command.
Add examine_subclass to the game, rename to SQL_inheritance to fit the
official data model better. Adjust documentation.
Standalone backend needs to reset all options before it starts. To
facilitate that, have IsUnderPostmaster be set by the postmaster itself,
don't wait for the magic -p switch.
Also make sure that all environment variables and argv's survive
init_ps_display(). Use strdup where necessary.
Have initdb make configuration files (postgresql.conf, pg_hba.conf) mode
0600 -- having configuration files is no fun if you can't edit them.
entries now for int8 and network hash indexes. int24_ops and int42_ops
are gone. pg_opclass no longer contains multiple entries claiming to be
the default opclass for the same datatype. opr_sanity regress test
extended to catch errors like these in the future.
materialized tupleset is small enough) instead of a temporary relation.
This was something I was thinking of doing anyway for performance, and Jan
says he needs it for TOAST because he doesn't want to cope with toasting
noname relations. With this change, the 'noname table' support in heap.c
is dead code, and I have accordingly removed it. Also clean up 'noname'
plan handling in planner --- nonames are either sort or materialize plans,
and it seems less confusing to handle them separately under those names.
