In commit 9e8da0f757, I improved btree
to handle ScalarArrayOpExpr quals natively, so that constructs like
"indexedcol IN (list)" could be supported by index-only scans. Using
such a qual results in multiple scans of the index, under-the-hood.
I went to some lengths to ensure that this still produces rows in index
order ... but I failed to recognize that if a higher-order index column
is lacking an equality constraint, rescans can produce out-of-order
data from that column. Tweak the planner to not expect sorted output
in that case. Per trouble report from Robert McGehee.
Some experimentation with examples similar to bug #7539 has convinced me
that indxpath.c's original implementation of parameterized-path generation
was several bricks shy of a load. In general, if we are relying on a
particular outer rel or set of outer rels for a parameterized path, the
path should use every indexable join clause that's available from that rel
or rels. Any join clauses that get left out of the indexqual will end up
getting applied as plain filter quals (qpquals), and that's generally a
significant loser compared to having the index AM enforce them. (This is
particularly true with btree, which can skip the index scan entirely if
it can see that the given indexquals are mutually contradictory.) The
original heuristics failed to ensure this, though, and were overly
complicated anyway. Rewrite to make the code explicitly identify each
useful set of outer rels and then select all applicable join clauses for
each one. The one plan that changes in the regression tests is in fact
for the better according to the planner's cost estimates.
(Note: this is not a correctness issue but just a matter of plan quality.
I don't yet know what is going on in bug #7539, but I don't expect this
change to fix that.)
In commit 1bc16a9460 I added a minor
optimization to drop the component variables of a GROUP BY expression from
the target list computed at the aggregation level of a query, if those Vars
weren't referenced elsewhere in the tlist. However, I overlooked that the
window-function planning code would deconstruct such expressions and thus
need to have access to their component variables. Fix it to not do that.
While at it, I removed the distinction between volatile and nonvolatile
window partition/order expressions: the code now computes all of them
at the aggregation level. This saves a relatively expensive check for
volatility, and it's unclear that the resulting plan isn't better anyway.
Per bug #7535 from Louis-David Mitterrand. Back-patch to 9.2.
The planner previously assumed that parameter Vars having the same absolute
query level, varno, and varattno could safely be assigned the same runtime
PARAM_EXEC slot, even though they might be different Vars appearing in
different subqueries. This was (probably) safe before the introduction of
CTEs, but the lazy-evalution mechanism used for CTEs means that a CTE can
be executed during execution of some other subquery, causing the lifespan
of Params at the same syntactic nesting level as the CTE to overlap with
use of the same slots inside the CTE. In 9.1 we created additional hazards
by using the same parameter-assignment technology for nestloop inner scan
parameters, but it was broken before that, as illustrated by the added
regression test.
To fix, restructure the planner's management of PlannerParamItems so that
items having different semantic lifespans are kept rigorously separated.
This will probably result in complex queries using more runtime PARAM_EXEC
slots than before, but the slots are cheap enough that this hardly matters.
Also, stop generating PlannerParamItems containing Params for subquery
outputs: all we really need to do is reserve the PARAM_EXEC slot number,
and that now only takes incrementing a counter. The planning code is
simpler and probably faster than before, as well as being more correct.
Per report from Vik Reykja.
These changes will mostly also need to be made in the back branches, but
I'm going to hold off on that until after 9.2.0 wraps.
We can detect whether the planner top level is going to care at all about
cheap startup cost (it will only do so if query_planner's tuple_fraction
argument is greater than zero). If it isn't, we might as well discard
paths immediately whose only advantage over others is cheap startup cost.
This turns out to get rid of quite a lot of paths in complex queries ---
I saw planner runtime reduction of more than a third on one large query.
Since add_path isn't currently passed the PlannerInfo "root", the easiest
way to tell it whether to do this was to add a bool flag to RelOptInfo.
That's a bit redundant, since all relations in a given query level will
have the same setting. But in the future it's possible that we'd refine
the control decision to work on a per-relation basis, so this seems like
a good arrangement anyway.
Per my suggestion of a few months ago.
If a PlaceHolderVar contains a pulled-up LATERAL reference, its minimum
possible evaluation level might be higher in the join tree than its
original syntactic location. That in turn affects the ph_needed level for
any contained PlaceHolderVars (that is, those PHVs had better propagate up
the join tree at least to the evaluation level of the outer PHV). We got
this mostly right, but mark_placeholder_maybe_needed() failed to account
for the effect, and in consequence could leave the inner PHVs with
ph_may_need less than what their ultimate ph_needed value will be. That's
bad because it could lead to failure to select a join order that will allow
evaluation of the inner PHV at a valid location. Fix that, and add an
Assert that checks that we don't ever set ph_needed to more than
ph_may_need.
This patch takes care of a number of problems having to do with failure
to choose valid join orders and incorrect handling of lateral references
pulled up from subqueries. Notable changes:
* Add a LateralJoinInfo data structure similar to SpecialJoinInfo, to
represent join ordering constraints created by lateral references.
(I first considered extending the SpecialJoinInfo structure, but the
semantics are different enough that a separate data structure seems
better.) Extend join_is_legal() and related functions to prevent trying
to form unworkable joins, and to ensure that we will consider joins that
satisfy lateral references even if the joins would be clauseless.
* Fill in the infrastructure needed for the last few types of relation scan
paths to support parameterization. We'd have wanted this eventually
anyway, but it is necessary now because a relation that gets pulled up out
of a UNION ALL subquery may acquire a reltargetlist containing lateral
references, meaning that its paths *have* to be parameterized whether or
not we have any code that can push join quals down into the scan.
* Compute data about lateral references early in query_planner(), and save
in RelOptInfo nodes, to avoid repetitive calculations later.
* Assorted corner-case bug fixes.
There's probably still some bugs left, but this is a lot closer to being
real than it was before.
If we revoke a grant option from some role X, but X still holds the option
via another grant, we should not recursively revoke the privilege from
role(s) Y that X had granted it to. This was supposedly fixed as one
aspect of commit 4b2dafcc0b, but I must not
have tested it, because in fact that code never worked: it forgot to shift
the grant-option bits back over when masking the bits being revoked.
Per bug #6728 from Daniel German. Back-patch to all active branches,
since this has been wrong since 8.0.
Formerly, subquery pullup had no need to examine other entries in the range
table, since they could not contain any references to the subquery being
pulled up. That's no longer true with LATERAL, so now we need to be able
to visit rangetable subexpressions to replace Vars referencing the
pulled-up subquery. Also, this means that extract_lateral_references must
be unsurprised at encountering lateral PlaceHolderVars, since such might be
created when pulling up a subquery that's underneath an outer join with
respect to the lateral reference.
The implementation is a quad-tree, largely copied from the quad-tree
implementation for points. The lower and upper bound of ranges are the 2d
coordinates, with some extra code to handle empty ranges.
I left out the support for adjacent operator, -|-, from the original patch.
Not because there was necessarily anything wrong with it, but it was more
complicated than the other operators, and I only have limited time for
reviewing. That will follow as a separate patch.
Alexander Korotkov, reviewed by Jeff Davis and me.
The previous coding essentially assumed that nodes would be rescanned in
the same order they were initialized in; or at least that the "leader" of
a group of CTEscans would be rescanned before any others were required to
execute. Unfortunately, that isn't even a little bit true. It's possible
to devise queries in which the leader isn't rescanned until other CTEscans
on the same CTE have run to completion, or even in which the leader never
gets a rescan call at all.
The fix makes the leader specially responsible only for initial creation
and final destruction of the tuplestore; rescan resets are now a
symmetrically shared responsibility. This means that we might reset the
tuplestore multiple times when restarting a plan subtree containing
multiple CTEscans; but resetting an already-empty tuplestore is cheap
enough that that doesn't seem like a problem.
Per report from Adam Mackler; the new regression test cases are based on
his example query.
Back-patch to 8.4 where CTE scans were introduced.
xml_parse() would attempt to fetch external files or URLs as needed to
resolve DTD and entity references in an XML value, thus allowing
unprivileged database users to attempt to fetch data with the privileges
of the database server. While the external data wouldn't get returned
directly to the user, portions of it could be exposed in error messages
if the data didn't parse as valid XML; and in any case the mere ability
to check existence of a file might be useful to an attacker.
The ideal solution to this would still allow fetching of references that
are listed in the host system's XML catalogs, so that documents can be
validated according to installed DTDs. However, doing that with the
available libxml2 APIs appears complex and error-prone, so we're not going
to risk it in a security patch that necessarily hasn't gotten wide review.
So this patch merely shuts off all access, causing any external fetch to
silently expand to an empty string. A future patch may improve this.
In HEAD and 9.2, also suppress warnings about undefined entities, which
would otherwise occur as a result of not loading referenced DTDs. Previous
branches don't show such warnings anyway, due to different error handling
arrangements.
Credit to Noah Misch for first reporting the problem, and for much work
towards a solution, though this simplistic approach was not his preference.
Also thanks to Daniel Veillard for consultation.
Security: CVE-2012-3489
Re-allow subquery pullup for LATERAL subqueries, except when the subquery
is below an outer join and contains lateral references to relations outside
that outer join. If we pull up in such a case, we risk introducing lateral
cross-references into outer joins' ON quals, which is something the code is
entirely unprepared to cope with right now; and I'm not sure it'll ever be
worth coping with.
Support lateral refs in VALUES (this seems to be the only additional path
type that needs such support as a consequence of re-allowing subquery
pullup).
Put in a slightly hacky fix for joinpath.c's refusal to consider
parameterized join paths even when there cannot be any unparameterized
ones. This was causing "could not devise a query plan for the given query"
failures in queries involving more than two FROM items.
Put in an even more hacky fix for distribute_qual_to_rels() being unhappy
with join quals that contain references to rels outside their syntactic
scope; which is to say, disable that test altogether. Need to think about
how to preserve some sort of debugging cross-check here, while not
expending more cycles than befits a debugging cross-check.
The LATERAL marking has to be propagated down to the UNION leaf queries
when we pull them up. Also, fix the formerly stubbed-off
set_append_rel_pathlist(). It does already have enough smarts to cope with
making a parameterized Append path at need; it just has to not assume that
there *must* be an unparameterized path.
Formerly we relied on checking after-the-fact to see if an expression
contained aggregates, window functions, or sub-selects when it shouldn't.
This is grotty, easily forgotten (indeed, we had forgotten to teach
DefineIndex about rejecting window functions), and none too efficient
since it requires extra traversals of the parse tree. To improve matters,
define an enum type that classifies all SQL sub-expressions, store it in
ParseState to show what kind of expression we are currently parsing, and
make transformAggregateCall, transformWindowFuncCall, and transformSubLink
check the expression type and throw error if the type indicates the
construct is disallowed. This allows removal of a large number of ad-hoc
checks scattered around the code base. The enum type is sufficiently
fine-grained that we can still produce error messages of at least the
same specificity as before.
Bringing these error checks together revealed that we'd been none too
consistent about phrasing of the error messages, so standardize the wording
a bit.
Also, rewrite checking of aggregate arguments so that it requires only one
traversal of the arguments, rather than up to three as before.
In passing, clean up some more comments left over from add_missing_from
support, and annotate some tests that I think are dead code now that that's
gone. (I didn't risk actually removing said dead code, though.)
This patch implements the standard syntax of LATERAL attached to a
sub-SELECT in FROM, and also allows LATERAL attached to a function in FROM,
since set-returning function calls are expected to be one of the principal
use-cases.
The main change here is a rewrite of the mechanism for keeping track of
which relations are visible for column references while the FROM clause is
being scanned. The parser "namespace" lists are no longer lists of bare
RTEs, but are lists of ParseNamespaceItem structs, which carry an RTE
pointer as well as some visibility-controlling flags. Aside from
supporting LATERAL correctly, this lets us get rid of the ancient hacks
that required rechecking subqueries and JOIN/ON and function-in-FROM
expressions for invalid references after they were initially parsed.
Invalid column references are now always correctly detected on sight.
In passing, remove assorted parser error checks that are now dead code by
virtue of our having gotten rid of add_missing_from, as well as some
comments that are obsolete for the same reason. (It was mainly
add_missing_from that caused so much fudging here in the first place.)
The planner support for this feature is very minimal, and will be improved
in future patches. It works well enough for testing purposes, though.
catversion bump forced due to new field in RangeTblEntry.
DecodeInterval() failed to honor the "range" parameter (the special SQL
syntax for indicating which fields appear in the literal string) if the
time was signed. This seems inappropriate, so make it work like the
not-signed case. The inconsistency was introduced in my commit
f867339c01, which as noted in its log message
was only really focused on making SQL-compliant literals work per spec.
Including a sign here is not per spec, but if we're going to allow it
then it's reasonable to expect it to work like the not-signed case.
Also, remove bogus setting of tmask, which caused subsequent processing to
think that what had been given was a timezone and not an hh:mm(:ss) field,
thus confusing checks for redundant fields. This seems to be an aboriginal
mistake in Lockhart's commit 2cf1642461.
Add regression test cases to illustrate the changed behaviors.
Back-patch as far as 8.4, where support for spec-compliant interval
literals was added.
Range problem reported and diagnosed by Amit Kapila, tmask problem by me.
Parse analysis neglected to cover the case of a WITH clause attached to an
intermediate-level set operation; it only handled WITH at the top level
or WITH attached to a leaf-level SELECT. Per report from Adam Mackler.
In HEAD, I rearranged the order of SelectStmt's fields to put withClause
with the other fields that can appear on non-leaf SelectStmts. In back
branches, leave it alone to avoid a possible ABI break for third-party
code.
Back-patch to 8.4 where WITH support was added.
The initially implemented syntax, "CHECK NO INHERIT (expr)" was not
deemed very good, so switch to "CHECK (expr) NO INHERIT" instead. This
way it looks similar to SQL-standards compliant constraint attribute.
Backport to 9.2 where the new syntax and feature was introduced.
Per discussion.
Commit f5bcd398ad introduced a test using
a table named "circles" in inherit.sql. Unfortunately, the concurrently
executed constraints test was already using that table name, so the
parallel regression tests would sometimes fail. Rename table to dodge
the problem. Per buildfarm.
The code was setting it true for other constraints, which is
bogus. Doing so caused bogus catalog entries for such constraints, and
in particular caused an error to be raised when trying to drop a
constraint of types other than CHECK from a table that has children,
such as reported in bug #6712.
In 9.2, additionally ignore connoinherit=true for other constraint
types, to avoid having to force initdb; existing databases might already
contain bogus catalog entries.
Includes a catversion bump (in HEAD only).
Bug report from Miroslav Šulc
Analysis from Amit Kapila and Noah Misch; Amit also contributed the patch.
When a whole-row Var is reading the result of a subquery, we need it to
ignore any "resjunk" columns that the subquery might have evaluated for
GROUP BY or ORDER BY purposes. We've hacked this area before, in commit
68e40998d0, but that fix only covered
whole-row Vars of named composite types, not those of RECORD type; and it
was mighty klugy anyway, since it just assumed without checking that any
extra columns in the result must be resjunk. A proper fix requires getting
hold of the subquery's targetlist so we can actually see which columns are
resjunk (whereupon we can use a JunkFilter to get rid of them). So bite
the bullet and add some infrastructure to make that possible.
Per report from Andrew Dunstan and additional testing by Merlin Moncure.
Back-patch to all supported branches. In 8.3, also back-patch commit
292176a118, which for some reason I had
not done at the time, but it's a prerequisite for this change.
Commit 3855968f32 added syntax, pg_dump,
psql support, and documentation, but the triggers didn't actually fire.
With this commit, they now do. This is still a pretty basic facility
overall because event triggers do not get a whole lot of information
about what the user is trying to do unless you write them in C; and
there's still no option to fire them anywhere except at the very
beginning of the execution sequence, but it's better than nothing,
and a good building block for future work.
Along the way, add a regression test for ALTER LARGE OBJECT, since
testing of event triggers reveals that we haven't got one.
Dimitri Fontaine and Robert Haas
They don't actually do anything yet; that will get fixed in a
follow-on commit. But this gets the basic infrastructure in place,
including CREATE/ALTER/DROP EVENT TRIGGER; support for COMMENT,
SECURITY LABEL, and ALTER EXTENSION .. ADD/DROP EVENT TRIGGER;
pg_dump and psql support; and documentation for the anticipated
initial feature set.
Dimitri Fontaine, with review and a bunch of additional hacking by me.
Thom Brown extensively reviewed earlier versions of this patch set,
but there's not a whole lot of that code left in this commit, as it
turns out.
These functions support removing or replacing array element value(s)
matching a given search value. Although intended mainly to support a
future array-foreign-key feature, they seem useful in their own right.
Marco Nenciarini and Gabriele Bartolini, reviewed by Alex Hunsaker
To generate btree-indexable conditions from regex WHERE conditions (such as
WHERE indexed_col ~ '^foo'), we need to be able to identify any fixed
prefix that a regex might have; that is, find any string that must be a
prefix of all strings satisfying the regex. We used to do that with
entirely ad-hoc code that looked at the source text of the regex. It
didn't know very much about regex syntax, which mostly meant that it would
fail to identify some optimizable cases; but Viktor Rosenfeld reported that
it would produce actively wrong answers for quantified parenthesized
subexpressions, such as '^(foo)?bar'. Rather than trying to extend the
ad-hoc code to cover this, let's get rid of it altogether in favor of
identifying prefixes by examining the compiled form of a regex.
To do this, I've added a new entry point "pg_regprefix" to the regex library;
hopefully it is defined in a sufficiently general fashion that it can remain
in the library when/if that code gets split out as a standalone project.
Since this bug has been there for a very long time, this fix needs to get
back-patched. However it depends on some other recent commits (particularly
the addition of wchar-to-database-encoding conversion), so I'll commit this
separately and then go to work on back-porting the necessary fixes.
These triggers are identical except for whether ri_Check_Pk_Match is to be
called, so factor out the common code to save a couple hundred lines.
Also, eliminate null-column checks in ri_Check_Pk_Match, since they're
duplicate with the calling functions and require unnecessary complication
in its API statement.
Simplify the way code is shared between RI_FKey_check_ins and
RI_FKey_check_upd, too.
Once upon a time, somebody was worried that cached RI plans wouldn't get
remade with new default values after ALTER TABLE ... SET DEFAULT, so they
didn't allow caching of plans for ON UPDATE/DELETE SET DEFAULT actions.
That time is long gone, though (and even at the time I doubt this was the
greatest hazard posed by ALTER TABLE...). So allow these triggers to cache
their plans just like the others.
The cache_plan argument to ri_PlanCheck is now vestigial, since there
are no callers that don't pass "true"; but I left it alone in case there
is any future need for it.
Previously, when executing an ON UPDATE SET NULL or SET DEFAULT action for
a multicolumn MATCH SIMPLE foreign key constraint, we would set only those
referencing columns corresponding to referenced columns that were changed.
This is what the SQL92 standard said to do --- but more recent versions
of the standard say that all referencing columns should be set to null or
their default values, no matter exactly which referenced columns changed.
At least for SET DEFAULT, that is clearly saner behavior. It's somewhat
debatable whether it's an improvement for SET NULL, but it appears that
other RDBMS systems read the spec this way. So let's do it like that.
This is a release-notable behavioral change, although considering that
our documentation already implied it was done this way, the lack of
complaints suggests few people use such cases.
Previously we followed the SQL92 wording, "MATCH <unspecified>", but since
SQL99 there's been a less awkward way to refer to the default style.
In addition to the code changes, pg_constraint.confmatchtype now stores
this match style as 's' (SIMPLE) rather than 'u' (UNSPECIFIED). This
doesn't affect pg_dump or psql because they use pg_get_constraintdef()
to reconstruct foreign key definitions. But other client-side code might
examine that column directly, so this change will have to be marked as
an incompatibility in the 9.3 release notes.
zaptreesubs() was coded to unconditionally reset a capture subre's
corresponding pmatch[] entry. However, in regexes without backrefs, that
array is caller-supplied and might not have as many entries as the regex
has capturing parens. So check the array length and do nothing if there
is no corresponding entry, much as subset() does. Failure to check this
resulted in a stack clobber in the case reported by Marko Kreen.
This bug appears to have been latent in the regex library from the
beginning. It was not exposed because find() called dissect() not
cdissect(), and the dissect() code path didn't ever call zaptreesubs()
(formerly zapmem()). When I unified dissect() and cdissect() in commit
4dd78bf37a, the problem was exposed.
Now that I've seen this, I'm rather suspicious that we might need to
back-patch it; but will refrain for now, for lack of evidence that
the case can be hit in the previous coding.
bitmap_scan_cost_est() has to be able to cope with a BitmapOrPath, but
I'd taken a shortcut that didn't work for that case. Noted by Heikki.
Add some regression tests since this area is evidently under-covered.
We have been seeing intermittent buildfarm failures due to a query
sometimes not using an index-only scan plan, because a background
auto-ANALYZE prevented the table's all-visible bits from being set
immediately, thereby causing the estimated cost of an index-only scan
to go up considerably. Adjust the test case so that a bitmap index scan is
preferred instead, which serves equally well for the purpose the test case
is actually meant for. (Of course, it would be better to eliminate the
interference from auto-ANALYZE, but I see no low-risk way to do that,
so any such fix will have to be left for 9.3 or later.)
setrefs.c failed to do "rtoffset" adjustment of Vars in RETURNING lists,
which meant they were left with the wrong varnos when the RETURNING list
was in a subquery. That was never possible before writable CTEs, of
course, but now it's broken. The executor fails to notice any problem
because ExecEvalVar just references the ecxt_scantuple for any normal
varno; but EXPLAIN breaks when the varno is wrong, as illustrated in a
recent complaint from Bartosz Dmytrak.
Since the eventual rtoffset of the subquery is not known at the time
we are preparing its plan node, the previous scheme of executing
set_returning_clause_references() at that time cannot handle this
adjustment. Fortunately, it turns out that we don't really need to do it
that way, because all the needed information is available during normal
setrefs.c execution; we just have to dig it out of the ModifyTable node.
So, do that, and get rid of the kluge of early setrefs processing of
RETURNING lists. (This is a little bit of a cheat in the case of inherited
UPDATE/DELETE, because we are not passing a "root" struct that corresponds
exactly to what the subplan was built with. But that doesn't matter, and
anyway this is less ugly than early setrefs processing was.)
Back-patch to 9.1, where the problem became possible to hit.
The original syntax wasn't universally loved, and it didn't allow its
usage in CREATE TABLE, only ALTER TABLE. It now works everywhere, and
it also allows using ALTER TABLE ONLY to add an uninherited CHECK
constraint, per discussion.
The pg_constraint column has accordingly been renamed connoinherit.
This commit partly reverts some of the changes in
61d81bd28d, particularly some pg_dump and
psql bits, because now pg_get_constraintdef includes the necessary NO
INHERIT within the constraint definition.
Author: Nikhil Sontakke
Some tweaks by me
This patch adjusts the treatment of parameterized paths so that all paths
with the same parameterization (same set of required outer rels) for the
same relation will have the same rowcount estimate. We cache the rowcount
estimates to ensure that property, and hopefully save a few cycles too.
Doing this makes it practical for add_path_precheck to operate without
a rowcount estimate: it need only assume that paths with different
parameterizations never dominate each other, which is close enough to
true anyway for coarse filtering, because normally a more-parameterized
path should yield fewer rows thanks to having more join clauses to apply.
In add_path, we do the full nine yards of comparing rowcount estimates
along with everything else, so that we can discard parameterized paths that
don't actually have an advantage. This fixes some issues I'd found with
add_path rejecting parameterized paths on the grounds that they were more
expensive than not-parameterized ones, even though they yielded many fewer
rows and hence would be cheaper once subsequent joining was considered.
To make the same-rowcounts assumption valid, we have to require that any
parameterized path enforce *all* join clauses that could be obtained from
the particular set of outer rels, even if not all of them are useful for
indexing. This is required at both base scans and joins. It's a good
thing anyway since the net impact is that join quals are checked at the
lowest practical level in the join tree. Hence, discard the original
rather ad-hoc mechanism for choosing parameterization joinquals, and build
a better one that has a more principled rule for when clauses can be moved.
The original rule was actually buggy anyway for lack of knowledge about
which relations are part of an outer join's outer side; getting this right
requires adding an outer_relids field to RestrictInfo.
We should be willing to cross-join two small relations if that allows us
to use an inner indexscan on a large relation (that is, the potential
indexqual for the large table requires both smaller relations). This
worked in simple cases but fell apart as soon as there was a join clause
to a fourth relation, because the existence of any two-relation join clause
caused the planner to not consider clauseless joins between other base
relations. The added regression test shows an example case adapted from
a recent complaint from Benoit Delbosc.
Adjust have_relevant_joinclause, have_relevant_eclass_joinclause, and
has_relevant_eclass_joinclause to consider that a join clause mentioning
three or more relations is sufficient grounds for joining any subset of
those relations, even if we have to do so via a cartesian join. Since such
clauses are relatively uncommon, this shouldn't affect planning speed on
typical queries; in fact it should help a bit, because the latter two
functions in particular get significantly simpler.
Although this is arguably a bug fix, I'm not going to risk back-patching
it, since it might have currently-unforeseen consequences.
Per mailing list discussion, we would like to keep the bytea functions
parallel to the text functions, so rename bytea_agg to string_agg,
which already exists for text.
Also, to satisfy the rule that we don't want aggregate functions of
the same name with a different number of arguments, add a delimiter
argument, just like string_agg for text already has.
Previously we attempted to throw an error or at least warning for missing
schemas, but this was done inconsistently because of implementation
restrictions (in many cases, GUC settings are applied outside transactions
so that we can't do system catalog lookups). Furthermore, there were
exceptions to the rule even in the beginning, and we'd been poking more
and more holes in it as time went on, because it turns out that there are
lots of use-cases for having some irrelevant items in a common search_path
value. It seems better to just adopt a philosophy similar to what's always
been done with Unix PATH settings, wherein nonexistent or unreadable
directories are silently ignored.
This commit also fixes the documentation to point out that schemas for
which the user lacks USAGE privilege are silently ignored. That's always
been true but was previously not documented.
This is mostly in response to Robert Haas' complaint that 9.1 started to
throw errors or warnings for missing schemas in cases where prior releases
had not. We won't adopt such a significant behavioral change in a back
branch, so something different will be needed in 9.1.
ANALYZE now accepts foreign tables and allows the table's FDW to control
how the sample rows are collected. (But only manual ANALYZEs will touch
foreign tables, for the moment, since among other things it's not very
clear how to handle remote permissions checks in an auto-analyze.)
contrib/file_fdw is extended to support this.
Etsuro Fujita, reviewed by Shigeru Hanada, some further tweaking by me.
The parser got confused if a cursor parameter had the same name as
a plpgsql variable. Reported and diagnosed by Yeb Havinga, though
this isn't exactly his proposed fix.
Also, some mostly-but-not-entirely-cosmetic adjustments to the original
named-cursor-parameter patch, for code readability and better error
diagnostics.
