Previously, \d+ <table> displayed partitions differently from other object
lists: the first partition appeared on the same line as the "Partitions"
header. For example:
Partitions: pt12 FOR VALUES IN (1, 2),
pt34 FOR VALUES IN (3, 4)
This commit updates the output so that partitions are listed consistently
with other objects, with each entry on its own line starting below the header:
Partitions:
pt12 FOR VALUES IN (1, 2)
pt34 FOR VALUES IN (3, 4)
Author: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Neil Chen <carpenter.nail.cz@gmail.com>
Reviewed-by: Greg Sabino Mullane <htamfids@gmail.com>
Reviewed-by: Soumya S Murali <soumyamurali.work@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CAHut+Pu1puO00C-OhgLnAcECzww8MB3Q8DCsvx0cZWHRfs4gBQ@mail.gmail.com
When a backend attempts to start a read IO and finds the first buffer already
has I/O in progress, previously it waited for that I/O to complete before
initiating reads for any of the subsequent buffers.
Although it must wait for the I/O to finish when acquiring the buffer, there's
no reason for it to wait when setting up the read operation. Waiting at this
point prevents starting I/O on subsequent buffers and can significantly reduce
concurrency.
This matters in two workloads:
1) When multiple backends scan the same relation concurrently.
2) When a single backend requests the same block multiple times within the
readahead distance.
Waiting each time an in-progress read is encountered effectively degenerates
the access pattern into synchronous I/O.
To fix this, when encountering an already in-progress IO for the head buffer,
the wait reference is now recorded and waiting is deferred until
WaitReadBuffers(), when the buffer actually needs to be acquired.
In rare cases, a backend may still need to wait synchronously at IO
start time: If another backend has set BM_IO_IN_PROGRESS on the buffer
but has not yet set the wait reference. Such windows should be brief and
uncommon.
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/flat/zljergweqti7x67lg5ije2rzjusie37nslsnkjkkby4laqqbfw%403p3zu522yykv
Until now StartBufferIO() had a few weaknesses:
- As it did not submit staged IOs, it was not safe to call StartBufferIO()
where there was a potential for unsubmitted IO, which required
AsyncReadBuffers() to use a wrapper (ReadBuffersCanStartIO()) around
StartBufferIO().
- With nowait = true, the boolean return value did not allow to distinguish
between no IO being necessary and having to wait, which would lead
ReadBuffersCanStartIO() to unnecessarily submit staged IO.
- Several callers needed to handle both local and shared buffers, requiring
the caller to differentiate between StartBufferIO() and StartLocalBufferIO()
- In a future commit some callers of StartBufferIO() want the BufferDesc's
io_wref to be returned, to asynchronously wait for in-progress IO
- Indicating whether to wait with the nowait parameter was somewhat confusing
compared to a wait parameter
Address these issues as follows:
- StartBufferIO() is renamed to StartSharedBufferIO()
- A new StartBufferIO() is introduced that supports both shared and local
buffers
- The boolean return value has been replaced with an enum, indicating whether
the IO is already done, already in progress or that the buffer has been
readied for IO
- A new PgAioWaitRef * argument allows the caller to get the wait reference is
desired. All current callers pass NULL, a user of this will be introduced
subsequently
- Instead of the nowait argument there now is wait
This probably would not have been worthwhile on its own, but since all these
lines needed to be touched anyway...
Author: Andres Freund <andres@anarazel.de>
Author: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/zljergweqti7x67lg5ije2rzjusie37nslsnkjkkby4laqqbfw@3p3zu522yykv
While we have a lot of indirect coverage of read streams, there are corner
cases that are hard to test when only indirectly controlling and observing the
read stream. This commit adds an SQL callable SRF interface for a read stream
and uses that in a few tests.
To make some of the tests possible, the injection point infrastructure in
test_aio had to be expanded to allow blocking IO completion.
While at it, fix a wrong debug message in inj_io_short_read_hook().
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/zljergweqti7x67lg5ije2rzjusie37nslsnkjkkby4laqqbfw@3p3zu522yykv
An upcoming commit will make UnlockReleaseBuffer() considerably faster and
more scalable than doing LockBuffer(BUFFER_LOCK_UNLOCK); ReleaseBuffer();. But
it's a small performance benefit even as-is.
Most of the callsites changed in this patch are not performance sensitive,
however some, like the nbtree ones, are in critical paths.
This patch changes all the easily convertible places over to
UnlockReleaseBuffer() mainly because I needed to check all of them anyway, and
reducing cases where the operations are done separately makes the checking
easier.
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/5ubipyssiju5twkb7zgqwdr7q2vhpkpmuelxfpanetlk6ofnop@hvxb4g2amb2d
After the series of preceding commits introducing and using
BufferBeginSetHintBits()/BufferSetHintBits16(), hint bits are not set anymore
while IO is going on. Therefore we do not need to copy pages while they are
being written out anymore.
For the same reason XLogSaveBufferForHint() now does not need to operate on a
copy of the page anymore, but can instead use the normal XLogRegisterBuffer()
mechanism. For that the assertions and comments to XLogRegisterBuffer() had to
be updated to allow share-exclusive locked buffers to be registered.
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/5ubipyssiju5twkb7zgqwdr7q2vhpkpmuelxfpanetlk6ofnop@hvxb4g2amb2d
These tests were intended to be aligned with each other, but
additional tests for virtual generated columns disrupted that
alignment. The test confirming that user-defined types are not
allowed in virtual generated columns has also been moved to the
generated_virtual.sql-specific section.
Author: Yugo Nagata <nagata@sraoss.co.jp>
Reviewed-by: Paul A Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Mutaamba Maasha <maasha@gmail.com>
Reviewed-by: Surya Poondla <s_poondla@apple.com>
Discussion: https://www.postgresql.org/message-id/flat/20250808115142.e9ccb81f35466a9a131a4c55@sraoss.co.jp
Adding an implicit empty vertex pattern when a path pattern starts or
ends with an edge pattern or when two consecutive edge patterns appear
in the pattern is not supported right now. Prohibit such path
patterns.
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Henson Choi <assam258@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/72a23702-6d96-4103-a54b-057c2352e885%2540eisentraut.org
In a future commit more AIO related tests are due to be introduced. However
001_aio.pl already is fairly large.
This commit introduces a new TestAio package with helpers for writing AIO
related tests. Then it uses the new helpers to simplify the existing
001_aio.pl by iterating over all supported io_methods. This will be
particularly helpful because additional methods already have been submitted.
Additionally this commit splits out testing of initdb using a non-default
method into its own test. While that test is somewhat important, it's fairly
slow and doesn't break that often. For development velocity it's helpful for
001_aio.pl to be faster.
While particularly the latter could benefit from being its own commit, it
seems to introduce more back-and-forth than it's worth.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/zljergweqti7x67lg5ije2rzjusie37nslsnkjkkby4laqqbfw@3p3zu522yykv
Commit 497c1170cb added base32hex encoding support, but its
regression test for UUIDs failed on buildfarm members hippopotamus and
jay using natural language locales (such as cs_CZ). This happened
because those collations may sort characters differently, which breaks
the strict byte-wise lexicographical ordering expected by base32hex
encoding.
This commit fixes the regression tests by explicitly using the C
collation.
Per buildfarm members hippopotamus and jay.
Analyzed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/682417.1774482047@sss.pgh.pa.us
This adds support for base32hex encoding and decoding, as defined in
RFC 4648 Section 7. Unlike standard base32, base32hex uses the
extended hex alphabet (0-9, A-V) which preserves the lexicographical
order of the encoded data.
This is particularly useful for representing UUIDv7 values in a
compact string format while maintaining their time-ordered sort
property.
The encode() function produces output padded with '=', while decode()
accepts both padded and unpadded input. Following the behavior of
other encoding types, decoding is case-insensitive.
Suggested-by: Sergey Prokhorenko <sergeyprokhorenko@yahoo.com.au>
Author: Andrey Borodin <x4mmm@yandex-team.ru>
Co-authored-by: Aleksander Alekseev <aleksander@tigerdata.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Илья Чердаков <i.cherdakov.pg@gmail.com>
Reviewed-by: Chengxi Sun <chengxisun92@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/CAJ7c6TOramr1UTLcyB128LWMqita1Y7%3Darq3KHaU%3Dqikf5yKOQ%40mail.gmail.com
This test is proving to be unstable in the CI for Windows, at least.
The origin of the issue is that the deadlock_timeout requests may not
be processed, causing the lock stats to not be updated. This could be
mitigated by making the hardcoded sleep longer, however this would cost
in runtime on fast machines. On slow machines, there is no guarantee
that an augmented sleep would be enough.
An isolation test may not be the best method to write this test
(TAP test with injection point with a NOTICE+wait_for_log before
processing the deadlock_timeout request should remove the need of a
sleep). As we are late in the release cycle, I am removing the test for
now to keep the CI and the buildfarm a maximum stable. Let's revisit
this part later.
Discussion: https://postgr.es/m/hlkdrplgrmudbspibsuq6xooxrqxqsgwo6x5b6x5ptvkgjbe7w@xogt6xgua6dz
The check for a mismatch on the second decoded item pointer
was an exact copy of the first item pointer check, comparing
orig_itemptrs[0] with decoded_itemptrs[0] instead of orig_itemptrs[1]
with decoded_itemptrs[1]. The error message also reported (0, 1) as
the expected value instead of (blk, off). As a result, any decoding
error in the second item pointer (where the varbyte delta encoding
is exercised) would go undetected.
This has been wrong since commit bde7493d1, so backpatch to all
supported versions.
Author: Jianghua Yang <yjhjstz@gmail.com>
Discussion: https://postgr.es/m/CAAZLFmSOD8R7tZjRLZsmpKtJLoqjgawAaM-Pne1j8B_Q2aQK8w@mail.gmail.com
Backpatch-through: 14
This commit adds a new stats kind, called PGSTAT_KIND_LOCK, implementing
statistics for lock tags, as reported by pg_locks. The implementation
is fixed-sized, as the data is caped based on the number of lock tags in
LockTagType.
The new statistics kind records the following fields, providing insight
regarding lock behavior, while avoiding impact on performance-critical
code paths (such as fast-path lock acquisition):
- waits and wait_time: respectively track the number of times a lock
required waiting and the total time spent acquiring it. These metrics
are only collected once a lock is successfully acquired and after
deadlock_timeout has been exceeded.
fastpath_exceeded: counts how often a lock could not be acquired via
the fast path due to the max_locks_per_transaction slot limits.
A new view called pg_stat_lock can be used to access this data, coupled
with a SQL function called pg_stat_get_lock().
Bump stat file format PGSTAT_FILE_FORMAT_ID.
Bump catalog version.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/aIyNxBWFCybgBZBS%40ip-10-97-1-34.eu-west-3.compute.internal
This commit makes our implementation of SASLprep() compliant with RFC
3454 (Stringprep) and RFC 4013 (SASLprep). Originally, as introduced in
60f11b87a2, the operation considered a password made of only ASCII
characters as valid, performing an optimization for this case to skip
the internal NFKC transformation.
However, the RFCs listed above use a different definition, with the
following characters being prohibited:
- 0x00~0x1F (0~31), control characters.
- 0x7F (127, DEL).
In its SCRAM protocol, Postgres has the idea to apply a password as-is
if SASLprep() is not a success, so this change is safe on
backward-compatibility grounds:
- A libpq client with the compliant SASLprep can connect to a server
with a non-compliant SASLprep.
- A libpq client with the non-compliant SASLprep can connect to a server
with a compliant SASLprep.
This commit removes the all-ASCII optimization used in pg_saslprep() and
applies SASLprep even if a password is made only of ASCII characters,
making the operation compatible with the RFC. All the in-core callers
of pg_saslprep() do that:
- pg_be_scram_build_secret() in auth-scram.c, when generating a
SCRAM verifier for rolpassword in the backend.
- scram_init() in fe-auth-scram.c, when starting the SASL exchange.
- pg_fe_scram_build_secret() in fe-auth-scram.c, when generating a SCRAM
verifier for the frontend with libpq, to generate it for a ALTER/CREATE
ROLE command for example.
The test module test_saslprep shows the difference this change is
leading to.
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: John Naylor <johncnaylorls@gmail.com>
Discussion: https://postgr.es/m/aaEJ-El2seZHeFcG@paquier.xyz
_hash_vacuum_one_page() in hashinsert.c is a routine related to hash
indexes that can perform a single-page VACUUM when dead tuples are
detected during index insertion. This routine previously had no test
coverage, and this commit adds a test case for that purpose.
To safely create dead tuples in a way that works with parallel tests,
this uses a technique based on a rollbacked INSERT, following a
suggestion by Heikki Linnakangas.
Author: Alexander Kuzmenkov <akuzmenkov@tigerdata.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CALzhyqxrc1ZHYmf5V8NE+yMboqVg7xZrQM7K2c7VS0p1v8z42w@mail.gmail.com
genericcostestimate() estimates the number of index leaf pages to
be visited as a pro-rata fraction of the total number of leaf pages.
Or at least that was the intention. What it actually used in the
calculation was the total number of index pages, so that non-leaf
pages were also counted. In a decent-sized index the error is
probably small, since we expect upper page fanout to be high.
But in a small index that's not true; in the worst case with one
data-bearing page plus a metapage, we had 100% relative error.
This led to surprising planning choices such as not using a small
partial index.
To fix, ask genericcostestimate's caller to supply an estimate of
the number of non-leaf pages, and subtract that. For the built-in
index AMs, it seems sufficient to count the index metapage (if the
AM uses one) as non-leaf. Per the above argument, counting upper
index pages shouldn't change the estimate much, and in most cases
we don't have any easy way of estimating the number of upper pages.
This might be an area for further research in future.
Any external genericcostestimate callers that do not set the new field
GenericCosts.numNonLeafPages will see the same behavior as before,
assuming they followed the advice to zero out that whole struct.
Unsurprisingly, this change affects a number of plans seen in the
core regression tests. I hacked up the existing tests to keep the
tests' plans the same, since in each case it appeared that the
test's intent was to test exactly that plan. Also add one new
test case demonstrating that a better index choice is now made.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Henson Choi <assam258@gmail.com>
Discussion: https://postgr.es/m/870521.1745860752@sss.pgh.pa.us
Self-join removal failed to update Var nodes when the join clause was a
bare Var (e.g., ON t1.bool_col) rather than an expression containing
Vars. ChangeVarNodesWalkExpression() used expression_tree_walker(),
which descends into child nodes but does not process the top-level node
itself. When a bare Var referencing the removed relation appeared as
the clause, its varno was left unchanged, leading to "no relation entry
for relid N" errors.
Fix by calling ChangeVarNodes_walker() directly instead of
expression_tree_walker(), so the top-level node is also processed.
Bug: #19435
Reported-by: Hang Ammmkilo <ammmkilo@163.com>
Author: Andrei Lepikhov <lepihov@gmail.com>
Co-authored-by: Tender Wang <tndrwang@gmail.com>
Co-authored-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/19435-3cc1a87f291129f1%40postgresql.org
Backpatch-through: 18
Since this runs the main regression tests, it can take some time to
complete. Therefore, it's better to start it earlier, as we also do
for the main regression test suite.
Author: Matheus Alcantara <matheusssilv97@gmail.com>
Discussion: http://postgr.es/m/1095d3fe-a6eb-4d83-866e-649d6f369908@gmail.com
This adds the force_array option, which is available exclusively
when using COPY TO with the JSON format.
When enabled, this option wraps the output in a top-level JSON array
(enclosed in square brackets with comma-separated elements), making the
entire result a valid single JSON value. Without this option, the
default behavior is to output a stream of independent JSON objects.
Attempting to use this option with COPY FROM or with formats other than
JSON will raise an error.
Author: Joe Conway <mail@joeconway.com>
Author: jian he <jian.universality@gmail.com>
Reviewed-by: Junwang Zhao <zhjwpku@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Florents Tselai <florents.tselai@gmail.com>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/CALvfUkBxTYy5uWPFVwpk_7ii2zgT07t3d-yR_cy4sfrrLU%3Dkcg%40mail.gmail.com
Discussion: https://postgr.es/m/6a04628d-0d53-41d9-9e35-5a8dc302c34c@joeconway.com
This introduces the JSON format option for the COPY TO command, allowing
users to export query results or table data directly as a stream of JSON
objects (one per line, NDJSON style).
The JSON format is currently supported only for COPY TO operations; it
is not available for COPY FROM.
JSON format is incompatible with some standard text/CSV formatting
options, including HEADER, DEFAULT, NULL, DELIMITER, FORCE QUOTE,
FORCE NOT NULL, and FORCE NULL.
Column list support is included: when a column list is specified, only
the named columns are emitted in each JSON object.
Regression tests covering valid JSON exports and error handling for
incompatible options have been added to src/test/regress/sql/copy.sql.
Author: Joe Conway <mail@joeconway.com>
Author: jian he <jian.universality@gmail.com>
Co-Authored-By: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Andrey M. Borodin <x4mmm@yandex-team.ru>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Davin Shearer <davin@apache.org>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Junwang Zhao <zhjwpku@gmail.com>
Discussion: https://postgr.es/m/CALvfUkBxTYy5uWPFVwpk_7ii2zgT07t3d-yR_cy4sfrrLU%3Dkcg%40mail.gmail.com
Discussion: https://postgr.es/m/6a04628d-0d53-41d9-9e35-5a8dc302c34c@joeconway.com
This test leaves behind the roles and users it creates.
002_pg_upgrade test dumps and restore the regression when
PG_TEST_EXTRA contains regress_dump_restore. The global objects such
as users and roles are not dumped by pg_dump. But it still dumps the
policies associated with users, and commands to set the ownership.
Restoring these policies and the ownerships fails since the users and
roles do not exist. To fix this failure we could use --no-owner, but
it does not exclude the policy objects associated with users. Hence
drop the users, roles and policies that depend upon them at the end of
the test.
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reported-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/a855795d-e697-4fa5-8698-d20122126567@eisentraut.org
Following commit fd366065e0, which added EXCEPT TABLE support to
CREATE PUBLICATION, this commit extends ALTER PUBLICATION to allow
modifying the exclusion list.
New Syntax:
ALTER PUBLICATION name SET publication_all_object [, ... ]
where publication_all_object is one of:
ALL TABLES [ EXCEPT TABLE ( except_table_object [, ... ] ) ]
ALL SEQUENCES
If the EXCEPT clause is provided, the existing exclusion list in
pg_publication_rel is replaced with the specified relations. If the
EXCEPT clause is omitted, any existing exclusions for the publication
are cleared. Similarly, SET ALL SEQUENCES updates
Note that because this is a SET command, specifying only one object
type (e.g., SET ALL SEQUENCES) will reset the other unspecified flags
(e.g., setting puballtables to false).
Consistent with CREATE PUBLICATION, only root partitioned tables or
standard tables can be specified in the EXCEPT list. Specifying a
partition child will result in an error.
Author: vignesh C <vignesh21@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Discussion: https://postgr.es/m/CALDaNm3=JrucjhiiwsYQw5-PGtBHFONa6F7hhWCXMsGvh=tamA@mail.gmail.com
This enables the use of functions such as encode() and decode() with
UUID values, allowing them to be converted to and from alternative
formats like base64 or hex.
The cast maps the 16-byte internal representation of a UUID directly
to a bytea datum. This is more efficient than going through a text
forepresentation.
Bump catalog version.
Author: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Co-authored-by: Aleksander Alekseev <aleksander@tigerdata.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Discussion: https://postgr.es/m/CAJ7c6TOramr1UTLcyB128LWMqita1Y7%3Darq3KHaU%3Dqikf5yKOQ%40mail.gmail.com
In a plain join, we can just summarily discard an input tuple
with null join key(s), since it cannot match anything from
the other side of the join (assuming a strict join operator).
However, if the tuple comes from the outer side of an outer join
then we have to emit it with null-extension of the other side.
Up to now, hash joins did that by inserting the tuple into the hash
table as though it were a normal tuple. This is unnecessarily
inefficient though, since the required processing is far simpler than
for a potentially-matchable tuple. Worse, if there are a lot of such
tuples they will bloat the hash bucket they go into, possibly causing
useless repeated attempts to split that bucket or increase the number
of batches. We have a report of a large join vainly creating many
thousands of batches when faced with such input.
This patch improves the situation by keeping such tuples out of the
hash table altogether, instead pushing them into a separate tuplestore
from which we return them later. (One might consider trying to return
them immediately; but that would require substantial refactoring, and
it doesn't work anyway for cases where we rescan an unmodified hash
table.) This works even in parallel hash joins, because whichever
worker reads a null-keyed tuple can just return it; there's no need
for consultation with other workers. Thus the tuplestores are local
storage even in a parallel join.
A pre-existing buglet that I noticed while analyzing the code's
behavior is that ExecHashRemoveNextSkewBucket fails to decrement
hashtable->skewTuples for tuples moved into the main hash table
from the skew hash table. This invalidates ExecHashTableInsert's
calculation of the number of main-hash-table tuples, though probably
not by a lot since we expect the skew table to be small relative
to the main one. Nonetheless, let's fix that too while we're here.
Bug: #18909
Reported-by: Sergey Koposov <Sergey.Koposov@ed.ac.uk>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/3061845.1746486714@sss.pgh.pa.us
Except for GRANT and REVOKE on roles, the GRANTED BY clause
currently only accepts the current role to match the SQL standard.
And even if an acceptable grantor (i.e., the current role) is
specified, Postgres ignores it and chooses the "best" grantor for
the command. Allowing the user to select a specific grantor would
allow better control over the precise behavior of GRANT/REVOKE
statements. This commit adds that ability. For consistency with
select_best_grantor(), we only permit choosing grantor roles for
which the current role inherits privileges.
Author: Nathan Bossart <nathandbossart@gmail.com>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/aRYLkTpazxKhnS_w%40nathan
ScalarArrayOpExpr used for either NOT IN or <>/= ALL, when the array
contains a NULL constant, will never evaluate to true. Here we add an
explicit short-circuit in scalararraysel() to account for this and return
0.0 rows when we see that a NULL exists. When the array is a constant,
we can very quickly see if there are any NULL values and return early
before going to much effort in scalararraysel(). For non-const arrays,
we short-circuit after finding the first NULL and forego selectivity
estimations of any remaining elements.
In the future, it might be better to do something for this case in
constant folding. We would need to be careful to only do this for
strict operators on expressions located in places that don't care about
distinguishing false from NULL returns. i.e. EXPRKIND_QUAL expressions.
Doing that requires a bit more thought and effort, so here we just fix
some needlessly slow selectivity estimations for ScalarArrayOpExpr
containing many array elements and at least one NULL.
Author: Ilia Evdokimov <ilya.evdokimov@tantorlabs.com>
Reviewed-by: David Geier <geidav.pg@gmail.com>
Reviewed-by: Zsolt Parragi <zsolt.parragi@percona.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/eaa2598c-5356-4e1e-9ec3-5fd6eb1cd704@tantorlabs.com
This module includes two functions:
- test_saslprep(), that performs pg_saslprep on a bytea.
- test_saslprep_ranges(), able to check for all valid ranges of UTF-8
codepoints pg_saslprep() handles each one of them.
This provides a detailed coverage of our implementation of SASLprep()
used for SCRAM, with:
- ASCII characters.
- Incomplete UTF-8 sequences, for 390b3cbbb2 (later backpatched).
- A more advanced check for all the valid UTF-8 ranges of codepoints, to
check for cases where these generate an empty password, based on an
original suggestion from Heikki Linnakangas. This part consumes
resources and time, so it is implemented as a TAP test under a
new PG_TEST_EXTRA value.
A different patch is still under discussion to tweak our internal
SASLprep() implementation, and this module can be used to track any
changes in behavior.
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: John Naylor <johncnaylorls@gmail.com>
Discussion: https://postgr.es/m/aaEJ-El2seZHeFcG@paquier.xyz
widowbird has failed again after af8837a10b, with the same symptoms of
a backend still lying around when attempting a database rename with a
bgworker connected to the database being renamed.
We are still not sure yet how the failure can be reached, if this is a
timing issue in the test or an actual bug in the logic used for
interruptible bgworkers. This commit adds more debugging information in
the backend to help with the analysis as a temporary measure.
Another thing I have noticed is that the queries launching the dynamic
bgworkers or checking pg_stat_activity would connect to the database
renamed. These are switched to use 'postgres'. That will hopefully
remove some of the friction of the test, but I doubt that this is the
end of the story.
Discussion: https://postgr.es/m/abtJLEAsf1HZXWdR@paquier.xyz
SSL password command reloading must be enabled on Windows and in
EXEC_BACKEND builds due to them always reloading the context. The
new tests in commit 4f433025 skipped under Windows but missed the
EXEC_BACKEND check. Reported by buildfarm member culicidae.
Author: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CAOYmi+kXmCCgBWffzmSjaNhME5rD=gjyc_OP1FeWQTw2MmSNjg@mail.gmail.com
Support for SNI was added to clientside libpq in 5c55dc8b47 with the
sslsni parameter, but there was no support for utilizing it serverside.
This adds support for serverside SNI such that certificate/key handling
is available per host. A new config file, $datadir/pg_hosts.conf, is
used for configuring which certificate and key should be used for which
hostname. In order to use SNI the ssl_sni GUC must be set to on, when
it is off the ssl configuration works just like before. If ssl_sni is
enabled and pg_hosts.conf is non-empty it will take precedence over
the regular SSL GUCs, if it is empty or missing the regular GUCs will
be used just as before this commit with no hostname specific handling.
The TLS init hook is not compatible with ssl_sni since it operates on
a single TLS configuration and SNI break that assumption. If the init
hook and ssl_sni are both enabled, a WARNING will be issued.
Host configuration can either be for a literal hostname to match, non-
SNI connections using the no_sni keyword or a default fallback matching
all connections. By omitting no_sni and the fallback a strict mode
can be achieved where only connections using sslsni=1 and a specified
hostname are allowed.
CRL file(s) are applied from postgresql.conf to all configured hostnames.
Serverside SNI requires OpenSSL, currently LibreSSL does not support
the required infrastructure to update the SSL context during the TLS
handshake.
Author: Daniel Gustafsson <daniel@yesql.se>
Co-authored-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Zsolt Parragi <zsolt.parragi@percona.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Dewei Dai <daidewei1970@163.com>
Reviewed-by: Cary Huang <cary.huang@highgo.ca>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/1C81CD0D-407E-44F9-833A-DD0331C202E5@yesql.se
These tests were originally written to test the SSL SNI patchset
but they have merit on their own since we lack coverage for these
scenarios in the non SNI case as well.
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Co-authored-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/1C81CD0D-407E-44F9-833A-DD0331C202E5@yesql.se
Move explain_mask_costs() and the associated planner row-estimation
tests from misc_functions.sql to a new regression test file,
planner_est.sql.
Previously, there wasn't an ideal home for such tests, likely as there
were very few such tests due to width and selectivity estimations being
too dependent on statistics and hardware. That's not always the case, as
we have SupportRequestRows support functions. More such tests are
possibly on the way, so let's create a better home so that we don't have
to create the explain_mask_costs() function in each file we might have
added such tests to.
Author: Ilia Evdokimov <ilya.evdokimov@tantorlabs.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAApHDvphShGABn-3AoE36dTvGHW7gUpFSw0_ZZnH84wGCW3hHw@mail.gmail.com
The IS JSON predicate only accepted the base types text, json, jsonb, and
bytea. Extend it to also accept domain types over those base types by
resolving through getBaseType() during parse analysis.
The base type OID is stored in the JsonIsPredicate node (as exprBaseType)
so the executor can dispatch to the correct validation path without
repeating the domain lookup at runtime.
When a non-supported type (or domain over a non-supported type) is used,
the error message displays the original type name as written by the user,
rather than the resolved base type.
Author: jian he <jian.universality@gmail.com>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://postgr.es/m/CACJufxEk34DnJFG72CRsPPT4tsJL9arobX0tNPsn7yH28J=zQg@mail.gmail.com
In 82467f627b I somehow ended up using 'so->currPos.buf' instead of the 'buf'
variable, which is incorrect when the buffer is not already pinned. At the
very least this can lead to assertion failures
Unfortunately this shows that this code path was not covered. Expand
src/test/modules/index/specs/killtuples.spec to test it. Until now the
'result' step always reported either a 0 or 1 buffer accesses, but when
exercising hash overflows, more buffers are accessed. To avoid depending on
the precise number of accesses, change the result step to return whether there
were any heap accesses. That makes the change a lot more verbose, but still
seems worth it.
Reported-by: Alexander Kuzmenkov <akuzmenkov@tigerdata.com>
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reported-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/vjtmvwvbxt7w5uyacxpzibpj65ewcb7uqaqbhd4arvnjbp5jqz%405ksdh6fsyqve
Discussion: https://postgr.es/m/b9de8d05-3b02-4a27-9b0b-03972fa4bfd3@iki.fi
The TAP test included in this new module runs the regression tests
with pg_plan_advice loaded. It arranges for each query to be planned
twice. The first time, we generate plan advice. The second time, we
replan the query using the resulting advice string. If the tests
fail, that means that using pg_plan_advice to tell the planner to
do what it was going to do anyway breaks something, which indicates
a problem either with pg_plan_advice or with the planner.
The test also enables pg_plan_advice.feedback_warnings, so that if the
plan advice fails to apply cleanly when the query is replanned, a
failure will occur.
Reviewed-by: Alexandra Wang <alexandra.wang.oss@gmail.com>
Reviewed-by: Lukas Fittl <lukas@fittl.com>
Discussion: http://postgr.es/m/CA%2BTgmoZzM2i%2Bp-Rxdphs4qx7sshn-kzxF91ASQ5duOo0dFRXLQ%40mail.gmail.com
Complete the TODOs in to_json_is_immutable() and to_jsonb_is_immutable()
by recursing into container types (arrays, composites, ranges, multiranges,
domains) to check element/sub-type mutability, rather than conservatively
returning "mutable" for all arrays and composites.
The shared logic is factored into a single json_check_mutability() function
in jsonfuncs.c, with the existing exported functions as thin wrappers.
Composite type inspection uses lookup_rowtype_tupdesc() (typcache) instead
of relation_open() to avoid unnecessary lock acquisition in the optimizer.
Range and multirange types are now also checked recursively: if the
subtype's conversion is immutable, the range is considered immutable
for JSON purposes, even though range_out is generically marked STABLE.
This is a behavioral change: range types with immutable subtypes (e.g.,
int4range) can now appear in expression indexes via JSON_ARRAY/JSON_OBJECT,
whereas previously they were conservatively rejected.
Add regression tests for JSON_ARRAY and JSON_OBJECT mutability with
expression indexes and generated columns, covering arrays, composites,
domains, ranges, multiranges and combinations thereof.
Author: Jian He <jian.universality@gmail.com>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/CACJufxFz=OsXQdsMJ-cqoqspD9aJrwntsQP-U2A-UaV_M+-S9g@mail.gmail.com
Commitfest: https://commitfest.postgresql.org/patch/5759
This commit adds table OID and attribute number columns to
pg_stats, and it adds table OID and statistics object OID columns
to pg_stats_ext and pg_stats_ext_exprs. A proposed follow-up
commit would use pg_stats.tableid to simplify a query in pg_dump.
The others have no immediate purpose but may be useful later.
Bumps catversion.
Author: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CADkLM%3DcoCVy92QkVUUTLdo5eO2bMDtwMrzRn_8miAhX%2BuPaqXg%40mail.gmail.com
[NO] INHERIT is not supported for partitioned tables, but this portion
of tablecmds.c did not apply the same rules as the other sub-commands,
checking the relkind in the execution phase, not the preparation phase.
This commit refactors the code to centralize the relkind and other
checks in the preparation phase for both command patterns, getting rid
of one translatable string on the way. ATT_PARTITIONED_TABLE is
removed from ATSimplePermissions(), and the child relation is checked
the same way for both sub-commands. The ALTER TABLE patterns that now
fail at preparation failed already at execution, hence there should be
no changes from the user perspective except more consistent error
messages generated.
Some comments at the top of ATPrepAddInherit() were incorrect,
CreateInheritance() being the routine checking the columns and
constraints between the parent and its to-be-child.
Author: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Zsolt Parragi <zsolt.parragi@percona.com>
Discussion: https://postgr.es/m/CAEoWx2kggo1N2kDH6OSfXHL_5gKg3DqQ0PdNuL4LH4XSTKJ3-g@mail.gmail.com
The test has been reported as having a race condition for the case of a
worker that should be terminated after a database rename. Based on the
report received from buildfarm member jay, the database renamed is
accessed by a different session, preventing the ALTER DATABASE to
complete, ultimately failing the test.
Honestly, I am not completely sure what is the origin of this
disturbance, but two possibilities are an autovacuum or parallel worker
(due to debug_parallel_query being used by the host). In order to
(hopefully) stabilize the test, autovacuum and debug_parallel_query are
now disabled in the configuration of the node used in the test.
The failure is hard to reproduce, so it will take a few weeks to make
sure that the test has become stable. Let's see where it goes.
Reported-by: Aya Iwata <iwata.aya@fujitsu.com>
Discussion: https://postgr.es/m/OS3PR01MB8889505E2F3E443CCA4BD72EEA45A@OS3PR01MB8889.jpnprd01.prod.outlook.com
