Commit 112faf1378 added custom notice receivers for replication,
postgres_fdw, and dblink so that remote NOTICE, WARNING, and similar
messages are reported via ereport(). However, those notice receivers were
installed only after libpqsrv_connect() and libpqsrv_connect_params()
returned, by which point libpq connection startup had already completed.
As a result, messages emitted during connection establishment could be
missed.
This commit fixes the issue by splitting libpqsrv_connect() and
libpqsrv_connect_params() into separate start and complete phases:
libpqsrv_connect_start(), libpqsrv_connect_params_start(), and
libpqsrv_connect_complete(). This allows callers to perform
per-connection setup, such as installing a notice receiver, after the
connection has been started but before startup completes.
Note that callers of libpqsrv_connect_start() and
libpqsrv_connect_params_start() must still call
libpqsrv_connect_complete(), even if the start function returns NULL, so
that any external FDs reserved during startup are released properly.
Author: Chao Li <lic@highgo.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Rafia Sabih <rafia.pghackers@gmail.com>
Discussion: https://postgr.es/m/A2B8B7DE-C119-492F-A9FA-14CF86849777@gmail.com
Update typedefs.list from the buildfarm, and run pgindent.
The changes from the new typedefs list are pretty minimal,
since we'd been pretty good (not perfect) about updating
typedefs.list by hand. But the pgindent behavior changes
installed by a3e6beba6, b518ba4af, and 60f9467c3 add up
to make this a relatively sizable diff.
This function returns some value of enum HostsFileLoadResult,
but for reasons lost in the development process was declared to
return "int". Fix that, for clarity and so that our typedefs
collection tooling sees the typedef as used. Also fix the
variable that the sole call assigns into. Move the typedef
to the header file that declares load_hosts() to avoid creating
header dependency problems.
Discussion: https://postgr.es/m/359138.1777922557@sss.pgh.pa.us
Our RADIUS implementation supported only the deprecated RADIUS/UDP
variant, without the recommended Message-Authenticator attribute to
mitigate against the Blast-RADIUS vulnerability. By now, popular RADIUS
servers are expected to generate loud warnings or reject our
authentication attempts outright.
Since there have been no user reports about this, it seems unlikely that
there are users.
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Aleksander Alekseev <aleksander@tigerdata.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Michael Banck <mbanck@gmx.net>
Discussion: https://postgr.es/m/CA%2BhUKG%2BSH309V8KECU5%3DxuLP9Dks0v9f9UVS2W74fPAE5O21dg%40mail.gmail.com
OAuth validators can already use custom GUCs to configure behavior
globally. But we currently provide no ability to adjust settings for
individual HBA entries, because the original design focused on a world
where a provider covered a "single audience" of users for one database
cluster. This assumption does not apply to multitenant use cases, where
a single validator may be controlling access for wildly different user
groups.
To improve this use case, add two new API calls for use by validator
callbacks: RegisterOAuthHBAOptions() and GetOAuthHBAOption().
Registering options "foo" and "bar" allows a user to set "validator.foo"
and "validator.bar" in an oauth HBA entry. These options are stringly
typed (syntax validation is solely the responsibility of the defining
module), and names are restricted to a subset of ASCII to avoid tying
our hands with future HBA syntax improvements.
Unfortunately, we can't check the custom option names during a reload of
the configuration, like we do with standard HBA options, without
requiring all validators to be loaded via shared_preload_libraries.
(I consider this to be a nonstarter: most validators should probably use
session_preload_libraries at most, since requiring a full restart just
to update authentication behavior will be unacceptable to many users.)
Instead, the new validator.* options are checked against the registered
list at connection time.
Multiple alternatives were proposed and/or prototyped, including
extending the GUC system to allow per-HBA overrides, joining forces with
recent refactoring work on the reloptions subsystem, and giving the
ability to customize HBA options to all PostgreSQL extensions. I
personally believe per-HBA GUC overrides are the best option, because
several existing GUCs like authentication_timeout and pre_auth_delay
would fit there usefully. But the recent addition of SNI per-host
settings in 4f433025f indicates that a more general solution is needed,
and I expect that to take multiple releases' worth of discussion.
This compromise patch, then, is intentionally designed to be an
architectural dead end: simple to describe, cheap to maintain, and
providing just enough functionality to let validators move forward for
PG19. The hope is that it will be replaced in the future by a solution
that can handle per-host, per-HBA, and other per-context configuration
with the same functionality that GUCs provide today. In the meantime,
the bulk of the code in this patch consists of strict guardrails on the
simple API, to try to ensure that we don't have any reason to regret its
existence during its unknown lifespan.
I owe particular thanks here to Zsolt Parragi, who prototyped several
approaches that guided the final design.
Suggested-by: Zsolt Parragi <zsolt.parragi@percona.com>
Suggested-by: VASUKI M <vasukianand0119@gmail.com>
Reviewed-by: Zsolt Parragi <zsolt.parragi@percona.com>
Discussion: https://postgr.es/m/CAN4CZFM3b8u5uNNNsY6XCya257u%2BDofms3su9f11iMCxvCacag%40mail.gmail.com
At the moment, the only way for a validator module to report error
details on failure is to log them separately before returning from
validate_cb. Independently of that problem, the ereport() calls that we
make during validation failure partially duplicate some of the work of
auth_failed().
The end result is overly verbose and confusing for readers of the logs:
[768233] LOG: [my_validator] bad signature in bearer token
[768233] LOG: OAuth bearer authentication failed for user "jacob"
[768233] DETAIL: Validator failed to authorize the provided token.
[768233] FATAL: OAuth bearer authentication failed for user "jacob"
[768233] DETAIL: Connection matched file ".../pg_hba.conf" line ...
Solve both problems by making use of the existing logdetail pointer
that's provided by ClientAuthentication. Validator modules may set
ValidatorModuleResult->error_detail to override our default generic
message.
The end result looks something like
[242284] FATAL: OAuth bearer authentication failed for user "jacob"
[242284] DETAIL: [my_validator] bad signature in bearer token
Connection matched file ".../pg_hba.conf" line ...
Reported-by: Álvaro Herrera <alvherre@kurilemu.de>
Reported-by: Zsolt Parragi <zsolt.parragi@percona.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Zsolt Parragi <zsolt.parragi@percona.com>
Discussion: https://postgr.es/m/202601241015.y5uvxd7oxnfs%40alvherre.pgsql
Introduce PG_SASL_EXCHANGE_ABANDONED, which allows CheckSASLAuth to
suppress the failing log entry for any SASL exchange that isn't actually
an authentication attempt. This is desirable for OAUTHBEARER's discovery
exchanges (and a subsequent commit will make use of it there).
This might have some overlap in the future with in-band aborts for SASL
exchanges, but it's intentionally not named _ABORTED to avoid confusion.
(We don't currently support clientside aborts in our SASL profile.)
Adapted from a patch by Zsolt Parragi.
Author: Zsolt Parragi <zsolt.parragi@percona.com>
Co-authored-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/CAN4CZFPim7hUiyb7daNKQPSZ8CvQRBGkVhbvED7yZi8VktSn4Q%40mail.gmail.com
Support for SNI was added to clientside libpq in 5c55dc8b47 with the
sslsni parameter, but there was no support for utilizing it serverside.
This adds support for serverside SNI such that certificate/key handling
is available per host. A new config file, $datadir/pg_hosts.conf, is
used for configuring which certificate and key should be used for which
hostname. In order to use SNI the ssl_sni GUC must be set to on, when
it is off the ssl configuration works just like before. If ssl_sni is
enabled and pg_hosts.conf is non-empty it will take precedence over
the regular SSL GUCs, if it is empty or missing the regular GUCs will
be used just as before this commit with no hostname specific handling.
The TLS init hook is not compatible with ssl_sni since it operates on
a single TLS configuration and SNI break that assumption. If the init
hook and ssl_sni are both enabled, a WARNING will be issued.
Host configuration can either be for a literal hostname to match, non-
SNI connections using the no_sni keyword or a default fallback matching
all connections. By omitting no_sni and the fallback a strict mode
can be achieved where only connections using sslsni=1 and a specified
hostname are allowed.
CRL file(s) are applied from postgresql.conf to all configured hostnames.
Serverside SNI requires OpenSSL, currently LibreSSL does not support
the required infrastructure to update the SSL context during the TLS
handshake.
Author: Daniel Gustafsson <daniel@yesql.se>
Co-authored-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Zsolt Parragi <zsolt.parragi@percona.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Dewei Dai <daidewei1970@163.com>
Reviewed-by: Cary Huang <cary.huang@highgo.ca>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/1C81CD0D-407E-44F9-833A-DD0331C202E5@yesql.se
This commit adds a new parameter called
password_expiration_warning_threshold that controls when the server
begins emitting imminent-password-expiration warnings upon
successful password authentication. By default, this parameter is
set to 7 days, but this functionality can be disabled by setting it
to 0. This patch also introduces a new "connection warning"
infrastructure that can be reused elsewhere. For example, we may
want to warn about the use of MD5 passwords for a couple of
releases before removing MD5 password support.
Author: Gilles Darold <gilles@darold.net>
Co-authored-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Japin Li <japinli@hotmail.com>
Reviewed-by: songjinzhou <tsinghualucky912@foxmail.com>
Reviewed-by: liu xiaohui <liuxh.zj.cn@gmail.com>
Reviewed-by: Yuefei Shi <shiyuefei1004@gmail.com>
Reviewed-by: Steven Niu <niushiji@gmail.com>
Reviewed-by: Soumya S Murali <soumyamurali.work@gmail.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Reviewed-by: Zsolt Parragi <zsolt.parragi@percona.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Greg Sabino Mullane <htamfids@gmail.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/129bcfbf-47a6-e58a-190a-62fc21a17d03%40migops.com
The main reason that libpq doesn't request protocol version 3.2 by
default is because other proxy/server implementations don't implement
the negotiation. This is a bit of a chicken-and-egg problem: We don't
bump the default version that libpq requests, but other implementations
may not be incentivized to implement version negotiation if their users
never run into issues.
One established practice to combat this is to flip Postel's Law on its
head, by sending parameters that the server cannot possibly support. If
the server fails the handshake instead of correctly negotiating, then
the problem is surfaced naturally. If the server instead claims to
support the bogus parameters, then we fail the connection to make the
lie obvious. This is called "grease" (or "greasing"), after the GREASE
mechanism in TLS that popularized the concept:
https://www.rfc-editor.org/rfc/rfc8701.html
This patch reserves 3.9999 as an explicitly unsupported protocol version
number and `_pq_.test_protocol_negotiation` as an explicitly unsupported
protocol extension. A later commit will send these by default in order
to stress-test the ecosystem during the beta period; that commit will
then be reverted before 19 RC1, so that we can decide what to do with
whatever data has been gathered.
The _pq_.test_protocol_negotiation change here is intentionally docs-
only: after its implementation is reverted, the parameter should remain
reserved.
Extracted/adapted from a patch by Jelte Fennema-Nio.
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Co-authored-by: Jacob Champion <jacob.champion@enterprisedb.com>
Discussion: https://postgr.es/m/DDPR5BPWH1RJ.1LWAK6QAURVAY%40jeltef.nl
This reverts commit f0f2c0c1ae.
The original problem that led to the use of pg_restrict was that MSVC
couldn't handle plain restrict, and defining it to something else
would conflict with its __declspec(restrict) that is used in system
header files. In C11 mode, this is no longer a problem, as MSVC
handles plain restrict. This led to the commit to replace pg_restrict
with restrict. But this did not take C++ into account. Standard C++
does not have restrict, so we defined it as something else (for
example, MSVC supports __restrict). But this then again conflicts
with __declspec(restrict) in system header files. So we have to
revert this attempt. The comments are updated to clarify that the
reason for this is now C++ only.
Reported-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/CAGECzQRoD7chJP1-dneSrhxUJv%2BBRcigoGOO4UwGzaShLot2Yw%40mail.gmail.com
Presumably, the C type MsgType was meant to hold the protocol message
type in the pre-version-3 era, but this was never fully developed even
then, and the name is pretty confusing nowadays. It has only one
vestigial use for cancel requests that we can get rid of. Since a
cancel request is indicated by a special protocol version number, we
can use the ProtocolVersion type, which MsgType was based on.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/505e76cb-0ca2-4e22-ba0f-772b5dc3f230%40eisentraut.org
There was a pg_isblank() function that claimed to be a replacement for
the standard isblank() function, which was thought to be "not very
portable yet". We can now assume that it's portable (it's in C99).
But pg_isblank() actually diverged from the standard isblank() by also
accepting '\r', while the standard one only accepts space and tab.
This was added to support parsing pg_hba.conf under Windows. But the
hba parsing code now works completely differently and already handles
line endings before we get to pg_isblank(). The other user of
pg_isblank() is for ident protocol message parsing, which also handles
'\r' separately. So this behavior is now obsolete and confusing.
To improve clarity, I separated those concerns. The ident parsing now
gets its own function that hardcodes the whitespace characters
mentioned by the relevant RFC. pg_isblank() is now static in hba.c
and is a wrapper around the standard isblank(), with some extra logic
to ensure robust treatment of non-ASCII characters.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/170308e6-a7a3-4484-87b2-f960bb564afa%40eisentraut.org
Group the PG_PROTOCOL() codes, add a comment to AuthRequest now that the
AUTH_REQ codes live in a different header, and make some small
adjustments to spacing and comment style for the sake of scannability.
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CAOYmi%2B%3D6zg4oXXOQtifrVao_YKiujTDa3u6bxnU08r0FsSig4g%40mail.gmail.com
MSVC in C11 mode supports the standard restrict qualifier, so we don't
need the workaround naming pg_restrict anymore.
Even though restrict is in C99 and should be supported by all
supported compilers, we keep the configure test and the hardcoded
redirection to __restrict, because that will also work in C++ in all
supported compilers. (restrict is not part of the C++ standard.)
For backward compatibility for extensions, we keep a #define of
pg_restrict around, but our own code doesn't use it anymore.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/0e3d8644-c01d-4374-86ea-9f0a987981f0%40eisentraut.org
Store the information in guc_tables.c in a .dat file similar to the
catalog data in src/include/catalog/, and generate a part of
guc_tables.c from that. The goal is to make it easier to edit that
information, and to be able to make changes to the downstream data
structures more easily. (Essentially, those are the same reasons as
for the original adoption of the .dat format.)
Reviewed-by: John Naylor <johncnaylorls@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: David E. Wheeler <david@justatheory.com>
Discussion: https://www.postgresql.org/message-id/flat/dae6fe89-1e0c-4c3f-8d92-19d23374fb10%40eisentraut.org
This commit makes use of the existing PqMsg_* macros in more places
and adds new PqReplMsg_* and PqBackupMsg_* macros for use in
special replication and backup messages, respectively.
Author: Dave Cramer <davecramer@gmail.com>
Co-authored-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Discussion: https://postgr.es/m/aIECfYfevCUpenBT@nathan
Discussion: https://postgr.es/m/CAFcNs%2Br73NOUb7%2BqKrV4HHEki02CS96Z%2Bx19WaFgE087BWwEng%40mail.gmail.com
Remove a bunch of PG_TRY constructs, de-volatilize related
variables, remove some PQclear calls in error paths.
Aside from making the code simpler and shorter, this should
provide some marginal performance gains.
For ease of review, I did not re-indent code within the removed
PG_TRY constructs. That'll be done in a separate patch.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Discussion: https://postgr.es/m/2976982.1748049023@sss.pgh.pa.us
Commit 232d8caea fixed a case where postgres_fdw could lose track
of a PGresult object, resulting in a process-lifespan memory leak.
But I have little faith that there aren't other potential PGresult
leakages, now or in future, in the backend modules that use libpq.
Therefore, this patch proposes infrastructure that makes all
PGresults returned from libpq act as though they are palloc'd
in the CurrentMemoryContext (with the option to relocate them to
another context later). This should greatly reduce the risk of
careless leaks, and it also permits removal of a bunch of code
that attempted to prevent such leaks via PG_TRY blocks.
This patch adds infrastructure that wraps each PGresult in a
"libpqsrv_PGresult" that provides a memory context reset callback
to PQclear the PGresult. Code using this abstraction is inherently
memory-safe to the same extent as we are accustomed to in most backend
code. Furthermore, we add some macros that automatically redirect
calls of the libpq functions concerned with PGresults to use this
infrastructure, so that almost no source-code changes are needed to
wheel this infrastructure into place in all the backend code that
uses libpq.
Perhaps in future we could create similar infrastructure for
PGconn objects, but there seems less need for that.
This patch just creates the infrastructure and makes relevant code
use it, including reverting 232d8caea in favor of this mechanism.
A good deal of follow-on simplification is possible now that we don't
have to be so cautious about freeing PGresults, but I'll put that in
a separate patch.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Discussion: https://postgr.es/m/2976982.1748049023@sss.pgh.pa.us
Commit 112faf1378 introduced a translation marker in libpq-be-fe-helpers.h,
but this caused build failures on some platforms—such as the one reported
by buildfarm member indri—due to linker issues with dblink. This is the same
problem previously addressed in commit 213c959a29.
To fix the issue, this commit removes the translation marker from
libpq-be-fe-helpers.h, following the approach used in 213c959a29.
It also removes the associated gettext_noop() calls added in commit
112faf1378, as they are no longer needed.
While reviewing this, a gettext_noop() call was also found in
contrib/basic_archive. Since contrib modules don't support translation,
this call has been removed as well.
Per buildfarm member indri.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/0e6299d9-608a-4ffa-aeb1-40cb8a99000b@oss.nttdata.com
Previously, NOTICE, WARNING, and similar messages received from remote
servers over replication, postgres_fdw, or dblink connections were printed
directly to stderr on the local server (e.g., the subscriber). As a result,
these messages lacked log prefixes (e.g., timestamp), making them harder
to trace and correlate with other log entries.
This commit addresses the issue by introducing a custom notice receiver
for replication, postgres_fdw, and dblink connections. These messages
are now logged via ereport(), ensuring they appear in the logs with proper
formatting and context, which improves clarity and aids in debugging.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CALDaNm2xsHpWRtLm-VL_HJCsaE3+1Y_n-jDEAr3-suxVqc3xoQ@mail.gmail.com
A 'void *' argument suggests that the caller might pass an arbitrary
struct, which is appropriate for functions like libc's read/write, or
pq_sendbytes(). 'uint8 *' is more appropriate for byte arrays that
have no structure, like the cancellation keys or SCRAM tokens. Some
places used 'char *', but 'uint8 *' is better because 'char *' is
commonly used for null-terminated strings. Change code around SCRAM,
MD5 authentication, and cancellation key handling to follow these
conventions.
Discussion: https://www.postgresql.org/message-id/61be9e31-7b7d-49d5-bc11-721800d89d64@eisentraut.org
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in a few places. These
inconsistencies were all introduced during Postgres 18 development.
This commit was written with help from clang-tidy, by mechanically
applying the same rules as similar clean-up commits (the earliest such
commit was commit 035ce1fe).
This escape shows the numeric server IP address that the client
has connected to. Unix-socket connections will show "[local]".
Non-client processes (e.g. background processes) will show "[none]".
We expect that this option will be of interest to only a fairly
small number of users. Therefore the implementation is optimized
for the case where it's not used (that is, we don't do the string
conversion until we have to), and we've not added the field to
csvlog or jsonlog formats.
Author: Greg Sabino Mullane <htamfids@gmail.com>
Reviewed-by: Cary Huang <cary.huang@highgo.ca>
Reviewed-by: David Steele <david@pgmasters.net>
Reviewed-by: Jim Jones <jim.jones@uni-muenster.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAKAnmmK-U+UicE-qbNU23K--Q5XTLdM6bj+gbkZBZkjyjrd3Ow@mail.gmail.com
Currently, the cancel request key is a 32-bit token, which isn't very
much entropy. If you want to cancel another session's query, you can
brute-force it. In most environments, an unauthorized cancellation of
a query isn't very serious, but it nevertheless would be nice to have
more protection from it. Hence make the key longer, to make it harder
to guess.
The longer cancellation keys are generated when using the new protocol
version 3.2. For connections using version 3.0, short 4-bytes keys are
still used.
The new longer key length is not hardcoded in the protocol anymore,
the client is expected to deal with variable length keys, up to 256
bytes. This flexibility allows e.g. a connection pooler to add more
information to the cancel key, which might be useful for finding the
connection.
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Discussion: https://www.postgresql.org/message-id/508d0505-8b7a-4864-a681-e7e5edfe32aa@iki.fi
All supported version of the PostgreSQL server send the
NegotiateProtocolVersion message when an unsupported minor protocol
version is requested by a client. But many other applications that
implement the PostgreSQL protocol (connection poolers, or other
databases) do not, and the same is true for PostgreSQL server versions
older than 9.3. Connecting to such other applications thus fails if a
client requests a protocol version different than 3.0.
This patch adds a max_protocol_version connection option to libpq that
specifies the protocol version that libpq should request from the
server. Currently only 3.0 is supported, but that will change in a
future commit that bumps the protocol version. Even after that version
bump the default will likely stay 3.0 for the time being. Once more of
the ecosystem supports the NegotiateProtocolVersion message we might
want to change the default to the latest minor version.
This also adds the similar min_protocol_version connection option, to
allow the client to specify that connecting should fail if a lower
protocol version is attempted by the server. This can be used to
ensure that certain protocol features are used, which can be
particularly useful if those features impact security.
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Discussion: https://www.postgresql.org/message-id/CAGECzQTfc_O%2BHXqAo5_-xG4r3EFVsTefUeQzSvhEyyLDba-O9w@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/CAGECzQRbAGqJnnJJxTdKewTsNOovUt4bsx3NFfofz3m2j-t7tA@mail.gmail.com
Due to a conflict in macro names on Windows between <wincrypt.h>
and <openssl/ssl.h> these headers need to be included using a
predictable pattern with an undef to handle that. The GSSAPI
header <gssapi.h> does include <wincrypt.h> which cause problems
with compiling PostgreSQL using MSVC when OpenSSL and GSSAPI are
both enabled in the tree. Rather than fixing piecemeal for each
file including gssapi headers, move the the includes and undef
to a new file which should be used to centralize the logic.
This patch is a reworked version of a patch by Imran Zaheer
proposed earlier in the thread. Once this has proven effective
in master we should look at backporting this as the problem
exist at least since v16.
Author: Daniel Gustafsson <daniel@yesql.se>
Co-authored-by: Imran Zaheer <imran.zhir@gmail.com>
Reported-by: Dave Page <dpage@pgadmin.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Discussion: https://postgr.es/m/20240708173204.3f3xjilglx5wuzx6@awork3.anarazel.de
This commit implements OAUTHBEARER, RFC 7628, and OAuth 2.0 Device
Authorization Grants, RFC 8628. In order to use this there is a
new pg_hba auth method called oauth. When speaking to a OAuth-
enabled server, it looks a bit like this:
$ psql 'host=example.org oauth_issuer=... oauth_client_id=...'
Visit https://oauth.example.org/login and enter the code: FPQ2-M4BG
Device authorization is currently the only supported flow so the
OAuth issuer must support that in order for users to authenticate.
Third-party clients may however extend this and provide their own
flows. The built-in device authorization flow is currently not
supported on Windows.
In order for validation to happen server side a new framework for
plugging in OAuth validation modules is added. As validation is
implementation specific, with no default specified in the standard,
PostgreSQL does not ship with one built-in. Each pg_hba entry can
specify a specific validator or be left blank for the validator
installed as default.
This adds a requirement on libcurl for the client side support,
which is optional to build, but the server side has no additional
build requirements. In order to run the tests, Python is required
as this adds a https server written in Python. Tests are gated
behind PG_TEST_EXTRA as they open ports.
This patch has been a multi-year project with many contributors
involved with reviews and in-depth discussions: Michael Paquier,
Heikki Linnakangas, Zhihong Yu, Mahendrakar Srinivasarao, Andrey
Chudnovsky and Stephen Frost to name a few. While Jacob Champion
is the main author there have been some levels of hacking by others.
Daniel Gustafsson contributed the validation module and various bits
and pieces; Thomas Munro wrote the client side support for kqueue.
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Co-authored-by: Daniel Gustafsson <daniel@yesql.se>
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Reviewed-by: Kashif Zeeshan <kashi.zeeshan@gmail.com>
Discussion: https://postgr.es/m/d1b467a78e0e36ed85a09adf979d04cf124a9d4b.camel@vmware.com
Future SASL mechanism, like OAUTHBEARER, will use this as a limit on
token messages coming from the client, so promote it to the header
file to make it available.
This patch is extracted from a larger body of work aimed at adding
support for OAUTHBEARER in libpq.
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CAOYmi+kJqzo6XsR9TEhvVfeVNQ-TyFM5LATypm9yoQVYk=4Wrw@mail.gmail.com
This enables SCRAM authentication for postgres_fdw when connecting to
a foreign server without having to store a plain-text password on user
mapping options.
This is done by saving the SCRAM ClientKey and ServeryKey from the
client authentication and using those instead of the plain-text
password for the server-side SCRAM exchange. The new foreign-server
or user-mapping option "use_scram_passthrough" enables this.
Co-authored-by: Matheus Alcantara <mths.dev@pm.me>
Co-authored-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/27b29a35-9b96-46a9-bc1a-914140869dac@gmail.com
Per git log, the last time someone tried to do something with
pgrminclude was around 2011. Many (not all) of the "pgrminclude
ignore" annotations are of a newer date but seem to have just been
copied around during refactorings and file moves and don't seem to
reflect an actual need anymore.
There have been some parallel experiments with include-what-you-use
(IWYU) annotations, but these don't seem to correspond very strongly
to pgrminclude annotations, so there is no value in keeping the
existing ones even for that kind of thing.
So, wipe them all away. We can always add new ones in the future
based on actual needs.
Discussion: https://www.postgresql.org/message-id/flat/2d4dc7b2-cb2e-49b1-b8ca-ba5f7024f05b%40eisentraut.org
MD5 has been considered to be unsuitable for use as a cryptographic
hash algorithm for some time. Furthermore, MD5 password hashes in
PostgreSQL are vulnerable to pass-the-hash attacks, i.e., knowing
the username and hashed password is sufficient to authenticate.
The SCRAM-SHA-256 method added in v10 is not subject to these
problems and is considered to be superior to MD5.
This commit marks MD5 password support in PostgreSQL as deprecated
and to be removed in a future release. The documentation now
contains several deprecation notices, and CREATE ROLE and ALTER
ROLE now emit deprecation warnings when setting MD5 passwords. The
warnings can be disabled by setting the md5_password_warnings
parameter to "off".
Reviewed-by: Greg Sabino Mullane, Jim Nasby
Discussion: https://postgr.es/m/ZwbfpJJol7lDWajL%40nathan
Commit d39a49c1e4 added new fields to the struct, but missed the "keep
these last" comment on the previous fields. Add placeholder variables
so that the offsets of the fields are the same whether you build with
USE_OPENSSL or not. This is a courtesy to extensions that might peek
at the fields, to make the ABI the same regardless of the options used
to build PostgreSQL.
In reality, I don't expect any extensions to look at the 'raw_buf'
fields. Firstly, they are new in v17, so no one's written such
extensions yet. Secondly, extensions should have no business poking at
those fields anyway. Nevertheless, fix this properly on 'master'. On
v17, we mustn't change the memory layout, so just fix the comments.
Author: Jacob Champion
Discussion: https://www.postgresql.org/message-id/raw/CAOYmi%2BmKVJNzn5_TD_MK%3DhqO64r_w8Gb0FHCLk0oAkW-PJv8jQ@mail.gmail.com
The ssl_ciphers GUC can only set cipher suites for TLSv1.2, and lower,
connections. For TLSv1.3 connections a different OpenSSL API must be
used. This adds a new GUC, ssl_tls13_ciphers, which can be used to
configure a colon separated list of cipher suites to support when
performing a TLSv1.3 handshake.
Original patch by Erica Zhang with additional hacking by me.
Author: Erica Zhang <ericazhangy2021@qq.com>
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Discussion: https://postgr.es/m/tencent_063F89FA72CCF2E48A0DF5338841988E9809@qq.com
The proposed OAUTHBEARER SASL mechanism will need to allow larger
messages in the exchange, since tokens are sent directly by the
client. Move this limit into the pg_be_sasl_mech struct so that
it can be changed per-mechanism.
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CAOYmi+nqX_5=Se0W0Ynrr55Fha3CMzwv_R9P3rkpHb=1kG7ZTQ@mail.gmail.com
PostgreSQL has for a long time mixed two BIO implementations, which can
lead to subtle bugs and inconsistencies. This cleans up our BIO by just
just setting up the methods we need. This patch does not introduce any
functionality changes.
The following methods are no longer defined due to not being needed:
- gets: Not used by libssl
- puts: Not used by libssl
- create: Sets up state not used by libpq
- destroy: Not used since libpq use BIO_NOCLOSE, if it was used it close
the socket from underneath libpq
- callback_ctrl: Not implemented by sockets
The following methods are defined for our BIO:
- read: Used for reading arbitrary length data from the BIO. No change
in functionality from the previous implementation.
- write: Used for writing arbitrary length data to the BIO. No change
in functionality from the previous implementation.
- ctrl: Used for processing ctrl messages in the BIO (similar to ioctl).
The only ctrl message which matters is BIO_CTRL_FLUSH used for
writing out buffered data (or signal EOF and that no more data
will be written). BIO_CTRL_FLUSH is mandatory to implement and
is implemented as a no-op since there is no intermediate buffer
to flush.
BIO_CTRL_EOF is the out-of-band method for signalling EOF to
read_ex based BIO's. Our BIO is not read_ex based but someone
could accidentally call BIO_CTRL_EOF on us so implement mainly
for completeness sake.
As the implementation is no longer related to BIO_s_socket or calling
SSL_set_fd, methods have been renamed to reference the PGconn and Port
types instead.
This also reverts back to using BIO_set_data, with our fallback, as a small
optimization as BIO_set_app_data require the ex_data mechanism in OpenSSL.
Author: David Benjamin <davidben@google.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CAF8qwaCZ97AZWXtg_y359SpOHe+HdJ+p0poLCpJYSUxL-8Eo8A@mail.gmail.com
