Forward to POSIX pread() and pwrite(), or emulate them if unavailable.
The emulation is not perfect as the file position is changed, so
we'll put pg_ prefixes on the names to minimize the risk of confusion
in future patches that might inadvertently try to mix pread() and read()
on the same file descriptor.
Author: Thomas Munro
Reviewed-by: Tom Lane, Jesper Pedersen
Discussion: https://postgr.es/m/CAEepm=02rapCpPR3ZGF2vW=SBHSdFYO_bz_f-wwWJonmA3APgw@mail.gmail.com
The "rb" prefix is used by Ruby, so that our existing code results
in name collisions that break plruby. We discussed ways to prevent
that by adjusting dynamic linker options, but it seems that at best
we'd move the pain to other cases. Renaming to avoid the collision
is the only portable fix anyway. Fortunately, our rbtree code is
not (yet?) widely used --- in core, there's only a single usage
in GIN --- so it seems likely that we can get away with a rename.
I chose to do this basically as s/rb/rbt/g, except for places where
there already was a "t" after "rb". The patch could have been made
smaller by only touching linker-visible symbols, but it would have
resulted in oddly inconsistent-looking code. Better to make it look
like "rbt" was the plan all along.
Back-patch to v10. The rbtree.c code exists back to 9.5, but
rb_iterate() which is the actual immediate source of pain was added
in v10, so it seems like changing the names before that would have
more risk than benefit.
Per report from Pavel Raiskup.
Discussion: https://postgr.es/m/4738198.8KVIIDhgEB@nb.usersys.redhat.com
pg_promote uses nothing relying on a global state, so it is fine to mark
it as parallel-safe, conclusion based on a detailed analysis from Robert
Haas. This also fixes an inconsistency where pg_proc.dat missed to mark
the function with its previous value for proparallel, update which does
not matter now as the default is used.
Based on a discussion between multiple folks: Laurenz Albe, Robert Haas,
Amit Kapila, Tom Lane and myself.
Discussion: https://postgr.es/m/20181029082530.GL14242@paquier.xyz
The entry with OID 4035, for GIST jsonb_ops, is unused; apparently
it was added in preparation for index support that never materialized.
Remove it, and add a regression test case to detect future mistakes
of the same kind.
Discussion: https://postgr.es/m/17188.1541379745@sss.pgh.pa.us
This has been deprecated and effectively unused for a long time.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
An array-type coercion appearing within a CASE that has a constant
(after const-folding) test expression was mangled by the planner, causing
all the elements of the resulting array to be equal to the coerced value
of the CASE's test expression. This is my oversight in commit c12d570fa:
that changed ArrayCoerceExpr to use a subexpression involving a
CaseTestExpr, and I didn't notice that eval_const_expressions needed an
adjustment to keep from folding such a CaseTestExpr to a constant when
it's inside a suitable CASE.
This is another in what's getting to be a depressingly long line of bugs
associated with misidentification of the referent of a CaseTestExpr.
We're overdue to redesign that mechanism; but any such fix is unlikely
to be back-patchable into v11. As a stopgap, fix eval_const_expressions
to do what it must here. Also add a bunch of comments pointing out the
restrictions and assumptions that are needed to make this work at all.
Also fix a related oversight: contain_context_dependent_node() was not
aware of the relationship of ArrayCoerceExpr to CaseTestExpr. That was
somewhat fail-soft, in that the outcome of a wrong answer would be to
prevent optimizations that could have been made, but let's fix it while
we're at it.
Per bug #15471 from Matt Williams. Back-patch to v11 where the faulty
logic came in.
Discussion: https://postgr.es/m/15471-1117f49271989bad@postgresql.org
This new function is useful to display a full tree of partitions with a
partitioned table given in output, and avoids the need of any complex
WITH RECURSIVE query when looking at partition trees which are
deep multiple levels.
It returns a set of records, one for each partition, containing the
partition's name, its immediate parent's name, a boolean value telling
if the relation is a leaf in the tree and an integer telling its level
in the partition tree with given table considered as root, beginning at
zero for the root, and incrementing by one each time the scan goes one
level down.
Author: Amit Langote
Reviewed-by: Jesper Pedersen, Michael Paquier, Robert Haas
Discussion: https://postgr.es/m/8d00e51a-9a51-ad02-d53e-ba6bf50b2e52@lab.ntt.co.jp
This function is able to promote a standby with this new SQL-callable
function. Execution access can be granted to non-superusers so that
failover tools can observe the principle of least privilege.
Catalog version is bumped.
Author: Laurenz Albe
Reviewed-by: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/6e7c79b3ec916cf49742fb8849ed17cd87aed620.camel@cybertec.at
This changes the documentation, and the related structures so as
everything is consistent.
Some wait events were not listed alphabetically since their
introduction, others have been added rather randomly. Keeping all those
entries in order helps in maintenance, and helps the user looking at the
documentation.
Author: Michael Paquier, Kuntal Ghosh
Discussion: https://postgr.es/m/20181024002539.GI1658@paquier.xyz
Backpatch-through: 10, only for the documentation part to avoid an ABI
breakage.
All existing uses can get this information more easily from the
relation descriptor, so the detour through the syscache is not
necessary.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Background workers, including parallel workers, were generating
the same sequence of numbers in random(). This showed up as DSM
handle collisions when Parallel Hash created multiple segments,
but any code that calls random() in background workers could be
affected if it cares about different backends generating different
numbers.
Repair by making sure that all new processes initialize the seed
at the same time as they set MyProcPid and MyStartTime in a new
function InitProcessGlobals(), called by the postmaster, its
children and also standalone processes. Also add a new high
resolution MyStartTimestamp as a potentially useful by-product,
and remove SessionStartTime from struct Port as it is now
redundant.
No back-patch for now, as the known consequences so far are just
a bunch of harmless shm_open(O_EXCL) collisions.
Author: Thomas Munro
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAEepm%3D2eJj_6%3DB%2B2tEpGu2nf1BjthCf9nXXUouYvJJ4C5WSwhg%40mail.gmail.com
es_leaf_result_relations doesn't exist; perhaps this was an old name
for es_tuple_routing_result_relations, or maybe this comment has gone
unmaintained through multiple rounds of whacking the code around.
Related comment in execnodes.h was both obsolete and ungrammatical.
That's worth it, as fmgr_builtins is frequently accessed, and as
fmgr_builtins is one of the biggest constant variables in a backend.
On most 64bit systems this will change the size of the struct from
32byte to 24bytes. While that could make indexing into the array
marginally more expensive, the higher cache hit ratio is worth more,
especially because these days fmgr_builtins isn't searched with a
binary search anymore (c.f. 212e6f34d5).
Discussion: https://postgr.es/m/20181016201145.aa2dfeq54rhqzron@alap3.anarazel.de
The new unconsitify(underlying_type, var) macro allows to cast
constness away from a variable, but doesn't allow changing the
underlying type. Enforcement of the latter currently only works for
gcc like compilers.
Please note IT IS NOT SAFE to cast constness away if the variable will ever
be modified (it would be undefined behaviour). Doing so anyway can cause
compiler misoptimizations or runtime crashes (modifying readonly memory).
It is only safe to use when the the variable will not be modified, but API
design or language restrictions prevent you from declaring that
(e.g. because a function returns both const and non-const variables).
This'll be used in an upcoming change, but seems like it's independent
infrastructure.
Author: Andres Freund
Discussion: https://postgr.es/m/20181015200754.7y7zfuzsoux2c4ya@alap3.anarazel.de
This allows the compiler / linker to mark affected pages as read-only.
There's a fair number of pre-requisite changes, to allow the const
properly be propagated. Most of consts were already required for
correctness anyway, just not represented on the type-level. Arguably
we could be more aggressive in using consts in related code, but..
This requires using a few of the types underlying typedefs that
removes pointers (e.g. const NameData *) as declaring the typedefed
type constant doesn't have the same meaning (it makes the variable
const, not what it points to).
Discussion: https://postgr.es/m/20181015200754.7y7zfuzsoux2c4ya@alap3.anarazel.de
This allows the compiler / linker to mark affected pages as read-only.
There's other cases, but they're a bit more invasive, and should go
through some review. These are easy.
They were found with
objdump -j .data -t src/backend/postgres|awk '{print $4, $5, $6}'|sort -r|less
Discussion: https://postgr.es/m/20181015200754.7y7zfuzsoux2c4ya@alap3.anarazel.de
There's several reasons for this change:
1) It reduces the total size of TupleTableSlot / reduces alignment
padding, making the commonly accessed members fit into a single
cacheline (but we currently do not force proper alignment, so
that's not yet guaranteed to be helpful)
2) Combining the booleans into a flag allows to combine read/writes
from memory.
3) With the upcoming slot abstraction changes, it allows to have core
and extended flags, in a memory efficient way.
Author: Ashutosh Bapat and Andres Freund
Discussion: https://postgr.es/m/20180220224318.gw4oe5jadhpmcdnm@alap3.anarazel.de
heaptuple.c was never a particular good fit for slot_getattr(),
slot_getsomeattrs() and slot_getmissingattrs(), but in upcoming
changes slots will be made more abstract (allowing slots that contain
different types of tuples), making it clearly the wrong place.
Note that slot_deform_tuple() remains in it's current place, as it
clearly deals with a HeapTuple. getmissingattrs() also remains, but
it's less clear that that's correct - but execTuples.c wouldn't be the
right place.
Author: Ashutosh Bapat.
Discussion: https://postgr.es/m/20180220224318.gw4oe5jadhpmcdnm@alap3.anarazel.de
We can allow this macro to accept either abbreviated or non-abbreviated
allocation parameters by making use of __VA_ARGS__. As noted by Andres
Freund, it's unlikely that any compiler would have __builtin_constant_p
but not __VA_ARGS__, so this gives up little or no error checking, and
it avoids a minor but annoying API break for extensions.
With this change, there is no reason for anybody to call
AllocSetContextCreateExtended directly, so in HEAD I renamed it to
AllocSetContextCreateInternal. It's probably too late for an ABI
break like that in 11, though.
Discussion: https://postgr.es/m/20181012170355.bhxi273skjt6sag4@alap3.anarazel.de
There was no code to handle foreign key constraints on partitioned
tables in the case of ALTER TABLE DETACH; and if you happened to ATTACH
a partition that already had an equivalent constraint, that one was
ignored and a new constraint was created. Adding this to the fact that
foreign key cloning reuses the constraint name on the partition instead
of generating a new name (as it probably should, to cater to SQL
standard rules about constraint naming within schemas), the result was a
pretty poor user experience -- the most visible failure was that just
detaching a partition and re-attaching it failed with an error such as
ERROR: duplicate key value violates unique constraint "pg_constraint_conrelid_contypid_conname_index"
DETAIL: Key (conrelid, contypid, conname)=(26702, 0, test_result_asset_id_fkey) already exists.
because it would try to create an identically-named constraint in the
partition. To make matters worse, if you tried to drop the constraint
in the now-independent partition, that would fail because the constraint
was still seen as dependent on the constraint in its former parent
partitioned table:
ERROR: cannot drop inherited constraint "test_result_asset_id_fkey" of relation "test_result_cbsystem_0001_0050_monthly_2018_09"
This fix attacks the problem from two angles: first, when the partition
is detached, the constraint is also marked as independent, so the drop
now works. Second, when the partition is re-attached, we scan existing
constraints searching for one matching the FK in the parent, and if one
exists, we link that one to the parent constraint. So we don't end up
with a duplicate -- and better yet, we don't need to scan the referenced
table to verify that the constraint holds.
To implement this I made a small change to previously planner-only
struct ForeignKeyCacheInfo to contain the constraint OID; also relcache
now maintains the list of FKs for partitioned tables too.
Backpatch to 11.
Reported-by: Michael Vitale (bug #15425)
Discussion: https://postgr.es/m/15425-2dbc9d2aa999f816@postgresql.org
Repeatedly rewriting a mapped catalog table with VACUUM FULL or
CLUSTER could cause logical decoding to fail with:
ERROR, "could not map filenode \"%s\" to relation OID"
To trigger the problem the rewritten catalog had to have live tuples
with toasted columns.
The problem was triggered as during catalog table rewrites the
heap_insert() check that prevents logical decoding information to be
emitted for system catalogs, failed to treat the new heap's toast table
as a system catalog (because the new heap is not recognized as a
catalog table via RelationIsLogicallyLogged()). The relmapper, in
contrast to the normal catalog contents, does not contain historical
information. After a single rewrite of a mapped table the new relation
is known to the relmapper, but if the table is rewritten twice before
logical decoding occurs, the relfilenode cannot be mapped to a
relation anymore. Which then leads us to error out. This only
happens for toast tables, because the main table contents aren't
re-inserted with heap_insert().
The fix is simple, add a new heap_insert() flag that prevents logical
decoding information from being emitted, and accept during decoding
that there might not be tuple data for toast tables.
Unfortunately that does not fix pre-existing logical decoding
errors. Doing so would require not throwing an error when a filenode
cannot be mapped to a relation during decoding, and that seems too
likely to hide bugs. If it's crucial to fix decoding for an existing
slot, temporarily changing the ERROR in ReorderBufferCommit() to a
WARNING appears to be the best fix.
Author: Andres Freund
Discussion: https://postgr.es/m/20180914021046.oi7dm4ra3ot2g2kt@alap3.anarazel.de
Backpatch: 9.4-, where logical decoding was introduced
It was previously a string setting that was converted into an enum by
custom code, but using the GUC enum facility seems much simpler and
doesn't change any functionality, except that
set transaction_isolation='default';
no longer works, but that was never documented and doesn't work with
any other transaction characteristics. (Note that this is not the
same as RESET or SET TO DEFAULT, which still work.)
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://www.postgresql.org/message-id/457db615-e84c-4838-310e-43841eb806e5@iki.fi
NetBSD-current generates a large number of warnings about "%m" not
being appropriate to use with *printf functions. While that's true
for their native printf, it's surely not true for snprintf.c, so I
think they have misunderstood gcc's definition of the "gnu_printf"
archetype. Nonetheless, choosing "__syslog__" instead silences the
warnings; so teach configure about that.
Since this is only a cosmetic warning issue (and anyway it depends
on previous hacking to be self-consistent), no back-patch.
Discussion: https://postgr.es/m/16785.1539046036@sss.pgh.pa.us
This function lists the contents of the WAL archive status directory,
and is intended to be used by monitoring tools. Unlike pg_ls_dir(),
access to it can be granted to non-superusers so that those monitoring
tools can observe the principle of least privilege. Access is also
given by default to members of pg_monitor.
Author: Christoph Moench-Tegeder
Reviewed-by: Aya Iwata
Discussion: https://postgr.es/m/20180930205920.GA64534@elch.exwg.net
Originally committed as 15bc038f (plus some follow-ups), this was
reverted in 28e07270 due to a problem discovered in parallel
workers. This new version corrects that problem by sending the
list of uncommitted enum values to parallel workers.
Here follows the original commit message describing the change:
To prevent possibly breaking indexes on enum columns, we must keep
uncommitted enum values from getting stored in tables, unless we
can be sure that any such column is new in the current transaction.
Formerly, we enforced this by disallowing ALTER TYPE ... ADD VALUE
from being executed at all in a transaction block, unless the target
enum type had been created in the current transaction. This patch
removes that restriction, and instead insists that an uncommitted enum
value can't be referenced unless it belongs to an enum type created
in the same transaction as the value. Per discussion, this should be
a bit less onerous. It does require each function that could possibly
return a new enum value to SQL operations to check this restriction,
but there aren't so many of those that this seems unmaintainable.
Author: Andrew Dunstan and Tom Lane, with parallel query fix by Thomas Munro
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAEepm%3D0Ei7g6PaNTbcmAh9tCRahQrk%3Dr5ZWLD-jr7hXweYX3yg%40mail.gmail.com
Discussion: https://postgr.es/m/4075.1459088427%40sss.pgh.pa.us
A warning on a NetBSD box revealed to me that pg_waldump/compat.c
is using vprintf(), which snprintf.c did not provide coverage for.
This is not good if we want to have uniform *printf behavior, and
it's pretty silly to omit when it's a one-line function.
I also noted that snprintf.c has pg_vsprintf() but for some reason
it was not exposed to the outside world, creating another way in
which code might accidentally invoke the platform *printf family.
Let's just make sure that we replace all eight of the POSIX-standard
printf family.
Also, upgrade plperl.h and plpython.h to make sure that they do
their undefine/redefine rain dance for all eight, not some random
maybe-sufficient subset thereof.
Up to now, float4out/float8out handled NaN and Infinity cases explicitly,
and invoked psprintf only for ordinary float values. This was done because
platform implementations of snprintf produce varying representations of
these special cases. But now that we use snprintf.c always, it's better
to give it the responsibility to produce a uniform representation of
these cases, so that we have uniformity across the board not only in
float4out/float8out. Hence, move that work into fmtfloat().
Also, teach fmtfloat() to recognize IEEE minus zero and handle it
correctly. The previous coding worked only accidentally, and would
fail for e.g. "%+f" format (it'd print "+-0.00000"). Now that we're
using snprintf.c everywhere, it's not acceptable for it to do weird
things in corner cases. (This incidentally avoids a portability
problem we've seen on some really ancient platforms, that native
sprintf does the wrong thing with minus zero.)
Also, introduce a new entry point in snprintf.c to allow float[48]out
to bypass the work of interpreting a well-known format spec, as well
as bypassing the overhead of the psprintf layer. I modeled this API
loosely on strfromd(). In my testing, this brings float[48]out back
to approximately the same speed they had when using native snprintf,
fixing one of the main performance issues caused by using snprintf.c.
(There is some talk of more aggressive work to improve the speed of
floating-point output conversion, but these changes seem to provide
a better starting point for such work anyway.)
Getting rid of the previous ad-hoc hack for Infinity/NaN in fmtfloat()
allows removing <ctype.h> from snprintf.c's #includes. I also removed
a few other #includes that I think are historical, though the buildfarm
may expose that as wrong.
Discussion: https://postgr.es/m/13178.1538794717@sss.pgh.pa.us
If there are many ExecRowMark structs, we spent O(N^2) time in
ExecFindRowMark during executor startup. Once upon a time this was
not of great concern, but the addition of native partitioning has
squeezed out enough other costs that this can become the dominant
overhead in some use-cases for tables with many partitions.
To fix, simply replace that List data structure with an array.
This adds a little bit of cost to execCurrentOf(), but not much,
and anyway that code path is neither of large importance nor very
efficient now. If we ever decide it is a bottleneck, constructing a
hash table for lookup-by-tableoid would likely be the thing to do.
Per complaint from Amit Langote, though this is different from
his fix proposal.
Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp
In the wake of commit f2343653f, we no longer need some fields that
were used before to control executor lock acquisitions:
* PlannedStmt.nonleafResultRelations can go away entirely.
* partitioned_rels can go away from Append, MergeAppend, and ModifyTable.
However, ModifyTable still needs to know the RT index of the partition
root table if any, which was formerly kept in the first entry of that
list. Add a new field "rootRelation" to remember that. rootRelation is
partly redundant with nominalRelation, in that if it's set it will have
the same value as nominalRelation. However, the latter field has a
different purpose so it seems best to keep them distinct.
Amit Langote, reviewed by David Rowley and Jesper Pedersen,
and whacked around a bit more by me
Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp
Index DDL cascading on partitioned tables introduced a way for ALTER
TABLE to be called reentrantly. This caused an an important deficiency
in event trigger support to be exposed: on exiting the reentrant call,
the alter table state object was clobbered, causing a crash when the
outer alter table tries to finalize its processing. Fix the crash by
creating a stack of event trigger state objects. There are still ways
to cause things to misbehave (and probably other crashers) with more
elaborate tricks, but at least it now doesn't crash in the obvious
scenario.
Backpatch to 9.5, where DDL deparsing of event triggers was introduced.
Reported-by: Marco Slot
Authors: Michaël Paquier, Álvaro Herrera
Discussion: https://postgr.es/m/CANNhMLCpi+HQ7M36uPfGbJZEQLyTy7XvX=5EFkpR-b1bo0uJew@mail.gmail.com
We already have appropriate locks on every relation listed in the
query's rangetable before we reach the executor. Take the next step
in exploiting that knowledge by removing code that worries about
taking locks on non-leaf result relations in a partitioned table.
In particular, get rid of ExecLockNonLeafAppendTables and a stanza in
InitPlan that asserts we already have locks on certain such tables.
In passing, clean up some now-obsolete comments in InitPlan.
Amit Langote, reviewed by David Rowley and Jesper Pedersen,
and whacked around a bit more by me
Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp
Previously, a worker process would establish values for these based on
its own start time. In v10 and up, this can trivially be shown to cause
misbehavior of transaction_timestamp(), timestamp_in(), and related
functions which are (perhaps unwisely?) marked parallel-safe. It seems
likely that other behaviors might diverge from what happens in the parent
as well.
It's not as trivial to demonstrate problems in 9.6 or 9.5, but I'm sure
it's still possible, so back-patch to all branches containing parallel
worker infrastructure.
In HEAD only, mark now() and statement_timestamp() as parallel-safe
(other affected functions already were). While in theory we could
still squeeze that change into v11, it doesn't seem important enough
to force a last-minute catversion bump.
Konstantin Knizhnik, whacked around a bit by me
Discussion: https://postgr.es/m/6406dbd2-5d37-4cb6-6eb2-9c44172c7e7c@postgrespro.ru
Historically we forbade datatype-specific comparison functions from
returning INT_MIN, so that it would be safe to invert the sort order
just by negating the comparison result. However, this was never
really safe for comparison functions that directly return the result
of memcmp(), strcmp(), etc, as POSIX doesn't place any such restriction
on those library functions. Buildfarm results show that at least on
recent Linux on s390x, memcmp() actually does return INT_MIN sometimes,
causing sort failures.
The agreed-on answer is to remove this restriction and fix relevant
call sites to not make such an assumption; code such as "res = -res"
should be replaced by "INVERT_COMPARE_RESULT(res)". The same is needed
in a few places that just directly negated the result of memcmp or
strcmp.
To help find places having this problem, I've also added a compile option
to nbtcompare.c that causes some of the commonly used comparators to
return INT_MIN/INT_MAX instead of their usual -1/+1. It'd likely be
a good idea to have at least one buildfarm member running with
"-DSTRESS_SORT_INT_MIN". That's far from a complete test of course,
but it should help to prevent fresh introductions of such bugs.
This is a longstanding portability hazard, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/20180928185215.ffoq2xrq5d3pafna@alap3.anarazel.de
This lists the contents of a temporary directory associated to a given
tablespace, useful to get information about on-disk consumption caused
by temporary files used by a session query. By default, pg_default is
scanned, and a tablespace can be specified as argument.
This function is intended to be used by monitoring tools, and, unlike
pg_ls_dir(), access to them can be granted to non-superusers so that
those monitoring tools can observe the principle of least privilege.
Access is also given by default to members of pg_monitor.
Author: Nathan Bossart
Reviewed-by: Laurenz Albe
Discussion: https://postgr.es/m/92F458A2-6459-44B8-A7F2-2ADD3225046A@amazon.com
Instead of doing a lot of list_nth() accesses to es_range_table,
create a flattened pointer array during executor startup and index
into that to get at individual RangeTblEntrys.
This eliminates one source of O(N^2) behavior with lots of partitions.
(I'm not exactly convinced that it's the most important source, but
it's an easy one to fix.)
Amit Langote and David Rowley
Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp
Create an array estate->es_relations[] paralleling the es_range_table,
and store references to Relations (relcache entries) there, so that any
given RT entry is opened and closed just once per executor run. Scan
nodes typically still call ExecOpenScanRelation, but ExecCloseScanRelation
is no more; relation closing is now done centrally in ExecEndPlan.
This is slightly more complex than one would expect because of the
interactions with relcache references held in ResultRelInfo nodes.
The general convention is now that ResultRelInfo->ri_RelationDesc does
not represent a separate relcache reference and so does not need to be
explicitly closed; but there is an exception for ResultRelInfos in the
es_trig_target_relations list, which are manufactured by
ExecGetTriggerResultRel and have to be cleaned up by
ExecCleanUpTriggerState. (That much was true all along, but these
ResultRelInfos are now more different from others than they used to be.)
To allow the partition pruning logic to make use of es_relations[] rather
than having its own relcache references, adjust PartitionedRelPruneInfo
to store an RT index rather than a relation OID.
Amit Langote, reviewed by David Rowley and Jesper Pedersen,
some mods by me
Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp
When specified, this option allows VACUUM to skip the work on a relation
if there is a conflicting lock on it when trying to open it at the
beginning of its processing.
Similarly to autovacuum, this comes with a couple of limitations while
the relation is processed which can cause the process to still block:
- when opening the relation indexes.
- when acquiring row samples for table inheritance trees, partition trees
or certain types of foreign tables, and that a lock is taken on some
leaves of such trees.
Author: Nathan Bossart
Reviewed-by: Michael Paquier, Andres Freund, Masahiko Sawada
Discussion: https://postgr.es/m/9EF7EBE4-720D-4CF1-9D0E-4403D7E92990@amazon.com
Discussion: https://postgr.es/m/20171201160907.27110.74730@wrigleys.postgresql.org
I (Andres) was more than a bit hasty in committing 33001fd7a7
after last minute changes, leading to a number of problems (jit output
was only shown for JIT in parallel workers, and just EXPLAIN without
ANALYZE didn't work). Lukas luckily found these issues quickly.
Instead of combining instrumentation in in standard_ExecutorEnd(), do
so on demand in the new ExplainPrintJITSummary().
Also update a documentation example of the JIT output, changed in
52050ad8eb.
Author: Lukas Fittl, with minor changes by me
Discussion: https://postgr.es/m/CAP53PkxmgJht69pabxBXJBM+0oc6kf3KHMborLP7H2ouJ0CCtQ@mail.gmail.com
Backpatch: 11, where JIT compilation was introduced
In combination, these changes make our version of snprintf as fast
or faster than most platforms' native snprintf, except for cases
involving floating-point conversion (which we still delegate to
the native sprintf). The speed penalty for a float conversion
is down to around 10% though, much better than before.
Notable changes:
* Rather than always parsing the format twice to see if it contains
instances of %n$, do the extra scan only if we actually find a $.
This obviously wins for non-localized formats, and even when there
is use of %n$, we can avoid scanning text before the first % twice.
* Use strchrnul() if available to find the next %, and emit the
literal text between % escapes as strings rather than char-by-char.
* Create a bespoke function (dopr_outchmulti) for the common case
of emitting N copies of the same character, in place of writing
loops around dopr_outch.
* Simplify construction of the format string for invocations of sprintf
for floats.
* Const-ify some internal functions, and avoid unnecessary use of
pass-by-reference arguments.
Patch by me, reviewed by Andres Freund
Discussion: https://postgr.es/m/11787.1534530779@sss.pgh.pa.us
