This patch renames the sync_error_count column to sync_table_error_count
in the pg_stat_subscription_stats view. The new name makes the purpose
explicit now that a separate column exists to track sequence
synchronization errors.
Additionally, the column seq_sync_error_count is renamed to
sync_seq_error_count to maintain a consistent naming pattern, making it
easier for users to group, and query synchronization related counters.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/CALDaNm3WwJmz=-4ybTkhniB-Nf3qmFG9Zx1uKjyLLoPF5NYYXA@mail.gmail.com
If you go back as far as the RHEL7 era, <sys/auxv.h> does not provide
the HWCAPxxx macros needed with elf_aux_info or getauxval, so you need
to get those from the kernel header <asm/hwcap.h> instead. We knew
that for the 32-bit case but failed to extrapolate to the 64-bit case.
Oversight in commit aac831caf.
Reported-by: GaoZengqi <pgf00a@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAFmBtr3Av62-jBzdhFkDHXJF9vQmNtSnH2upwODjnRcsgdTytw@mail.gmail.com
Backpatch-through: 18
Remove bogus stripping of RelabelTypes: that can result in building
an output SAOP tree with incorrect exposed exprType for the operands,
which might confuse polymorphic operators. Moreover it demonstrably
prevents folding some OR-trees to SAOPs when the RHS expressions
have different base types that were coerced to the same type by
RelabelTypes.
Reduce prohibition on type_is_rowtype to just disallow type RECORD.
We need that because otherwise we would happily fold multiple RECORD
Consts into a RECORDARRAY Const even if they aren't the same record
type. (We could allow that perhaps, if we checked that they all have
the same typmod, but the case doesn't seem worth that much effort.)
However, there is no reason at all to disallow the transformation
for named composite types, nor domains over them: as long as we can
find a suitable array type we're good.
Remove some assertions that seem rather out of place (it's not
this code's duty to verify that the RestrictInfo structure is
sane). Rewrite some comments.
The issues with RelabelType stripping seem severe enough to
back-patch this into v18 where the code was introduced.
Author: Tender Wang <tndrwang@gmail.com>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAHewXN=aH7GQBk4fXU-WaEeVmQWUmBAeNyBfJ3VKzPphyPKUkQ@mail.gmail.com
Backpatch-through: 18
PostgreSQL 18 deprecated password_encryption='md5', but the
comments for this GUC in the sample configuration file did
not mention the deprecation. Update comments with a notice
to make as many users as possible aware of it. Also add a
comment to the related md5_password_warnings GUC while there.
Author: Michael Banck <mbanck@gmx.net>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Robert Treat <rob@xzilla.net>
Backpatch-through: 18
The existing format of pg_dependencies uses a single-object JSON
structure, with each key value embedding all the knowledge about the
set attributes tracked, like:
{"1 => 5": 1.000000, "5 => 1": 0.423130}
While this is a very compact format, it is confusing to read and it is
difficult to manipulate the values within the object, particularly when
tracking multiple attributes.
The new output format introduced in this commit is a JSON array of
objects, with:
- A key named "degree", with a float value.
- A key named "attributes", with an array of attribute numbers.
- A key named "dependency", with an attribute number.
The values use the same underlying type as previously when printed, with
a new output format that shows now as follows:
[{"degree": 1.000000, "attributes": [1], "dependency": 5},
{"degree": 0.423130, "attributes": [5], "dependency": 1}]
This new format will become handy for a follow-up set of changes, so as
it becomes possible to inject extended statistics rather than require an
ANALYZE, like in a dump/restore sequence or after pg_upgrade on a new
cluster.
This format has been suggested by Tomas Vondra. The key names are
defined in the header introduced by 1f927cce44, to ease the
integration of frontend-specific changes that are still under
discussion. (Again a personal note: if anybody comes up with better
name for the keys, of course feel free.)
The bulk of the changes come from the regression tests, where
jsonb_pretty() is now used to make the outputs generated easier to
parse.
Author: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CADkLM=dpz3KFnqP-dgJ-zvRvtjsa8UZv8wDAQdqho=qN3kX0Zg@mail.gmail.com
The existing format of pg_ndistinct uses a single-object JSON structure
where each key is itself a comma-separated list of attnums, like:
{"3, 4": 11, "3, 6": 11, "4, 6": 11, "3, 4, 6": 11}
While this is a very compact format, it is confusing to read and it is
difficult to manipulate the values within the object.
The new output format introduced in this commit is an array of objects,
with:
- A key named "attributes", that contains an array of attribute numbers.
- A key named "ndistinct", represented as an integer.
The values use the same underlying type as previously when printed, with
a new output format that shows now as follows:
[{"ndistinct": 11, "attributes": [3,4]},
{"ndistinct": 11, "attributes": [3,6]},
{"ndistinct": 11, "attributes": [4,6]},
{"ndistinct": 11, "attributes": [3,4,6]}]
This new format will become handy for a follow-up set of changes, so as
it becomes possible to inject extended statistics rather than require an
ANALYZE, like in a dump/restore sequence or after pg_upgrade on a new
cluster.
This format has been suggested by Tomas Vondra. The key names are
defined in a new header, to ease with the integration of
frontend-specific changes that are still under discussion. (Personal
note: I am not specifically wedded to these key names, but if there are
better name suggestions for this release, feel free.)
The bulk of the changes come from the regression tests, where
jsonb_pretty() is now used to make the outputs generated easier to
parse.
Author: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CADkLM=dpz3KFnqP-dgJ-zvRvtjsa8UZv8wDAQdqho=qN3kX0Zg@mail.gmail.com
Until d2ea2d310d, the PS_USE_PS_STRINGS
option was used on the GNU/Hurd. As this option got removed and
PS_USE_CLOBBER_ARGV appears to work fine nowadays on the Hurd, define
this one to re-enable process title changes on this platform.
In the 14 and 15 branches, the existing test for __hurd__ (added 25
years ago by commit 209aa77d, removed in 16 by the above commit) is left
unchanged for now as it was activating slightly different code paths and
would need investigation by a Hurd user.
Author: Michael Banck <mbanck@debian.org>
Discussion: https://postgr.es/m/CA%2BhUKGJMNGUAqf27WbckYFrM-Mavy0RKJvocfJU%3DJ2XcAZyv%2Bw%40mail.gmail.com
Backpatch-through: 16
Likewise for MemSetAligned.
"long" wasn't the most suitable type for these macros as with MSVC in
64-bit builds, sizeof(long) == 4, which is narrower than the processor's
word size, therefore these macros had to perform twice as many loops as
they otherwise might.
Author: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CAApHDvoGFjSA3aNyVQ3ivbyc4ST=CC5L-_VjEUQ92HbE2Cxovg@mail.gmail.com
"long" is 32 bits on Windows 64-bit. Switch to a datatype that's 64-bit
on all platforms. While we're there, use an unsigned type as these
fields count things that have occurred, of which it's not possible to
have negative numbers of.
Author: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CAApHDvoGFjSA3aNyVQ3ivbyc4ST=CC5L-_VjEUQ92HbE2Cxovg@mail.gmail.com
This new test, added in 009_log_temp_files, checks that the temporary
files created by a WITH HOLD cursor are dropped at the end of the
transaction where the transaction has been created.
The portal's executor is shutdown in PersistHoldablePortal(), after for
example some forced detoast, so as the cursor data can be accessed
without requiring a snapshot.
Author: Mircea Cadariu <cadariu.mircea@gmail.com>
Discussion: https://postgr.es/m/0a666d28-9080-4239-90d6-f6345bb43468@gmail.com
When instrumenting a MERGE command containing both WHEN NOT MATCHED BY
SOURCE and WHEN NOT MATCHED BY TARGET actions using EXPLAIN ANALYZE, a
concurrent update of the target relation could lead to an Assert
failure in show_modifytable_info(). In a non-assert build, this would
lead to an incorrect value for "skipped" tuples in the EXPLAIN output,
rather than a crash.
This could happen if the concurrent update caused a matched row to no
longer match, in which case ExecMerge() treats the single originally
matched row as a pair of not matched rows, and potentially executes 2
not-matched actions for the single source row. This could then lead to
a state where the number of rows processed by the ModifyTable node
exceeds the number of rows produced by its source node, causing
"skipped_path" in show_modifytable_info() to be negative, triggering
the Assert.
Fix this in ExecMergeMatched() by incrementing the instrumentation
tuple count on the source node whenever a concurrent update of this
kind is detected, if both kinds of merge actions exist, so that the
number of source rows matches the number of actions potentially
executed, and the "skipped" tuple count is correct.
Back-patch to v17, where support for WHEN NOT MATCHED BY SOURCE
actions was introduced.
Bug: #19111
Reported-by: Dilip Kumar <dilipbalaut@gmail.com>
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Discussion: https://postgr.es/m/19111-5b06624513d301b3@postgresql.org
Backpatch-through: 17
WaitLSNWakeup() incorrectly returned early when called with
InvalidXLogRecPtr (meaning "wake all waiters"), because the fast-path
check compared minWaitedLSN > 0 without validating currentLSN first.
This caused WAIT FOR LSN commands to wait indefinitely during standby
promotion until random signals woke them.
Add an XLogRecPtrIsValid() check before the comparison so that
InvalidXLogRecPtr bypasses the fast-path and wakes all waiters immediately.
Discussion: https://postgr.es/m/CABPTF7UieOYbOgH3EnQCasaqcT1T4N6V2wammwrWCohQTnD_Lw%40mail.gmail.com
Author: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
All GUCs in postgresql.conf.sample should be set to the default
value and be commented out. This syntax was however not tested
for, making omissions easy to miss. Add a test which check all
lines for syntax.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/19727040-3EE4-4719-AF4F-2548544113D7@yesql.se
All settings in this file should be commented out. In addition to
fixing that, also fix the indentation for this line.
Oversight in commit c758119e5b.
Reported-by: Daniel Gustafsson <daniel@yesql.se>
Author: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/19727040-3EE4-4719-AF4F-2548544113D7%40yesql.se
Backpatch-through: 18
Commit 5e4fcbe531 added a check_rights parameter to this function
for use by ALTER TABLE commands that re-create statistics objects.
However, we intentionally ignore check_rights when verifying
relation ownership because this function's lookup could return a
different answer than the caller's. This commit adds a note to
this effect so that we remember it down the road.
Reviewed-by: Noah Misch <noah@leadboat.com>
Backpatch-through: 14
Path expansion might expose characters like spaces which would cause
command failure, so double-quote the examples. While %f doesn't need
quoting since it uses a fixed character set, it is best to be
consistent.
Discussion: https://postgr.es/m/aROPCQCfvKp9Htk4@momjian.us
Backpatch-through: master
Previously, when pgbench ran a custom script that triggered retriable errors
(e.g., deadlocks) followed by multiple \syncpipeline commands in pipeline mode,
the following assertion failure could occur:
Assertion failed: (res == ((void*)0)), function discardUntilSync, file pgbench.c, line 3594.
The issue was that discardUntilSync() assumed a pipeline sync result
(PGRES_PIPELINE_SYNC) would always be followed by either another sync result
or NULL. This assumption was incorrect: when multiple sync requests were sent,
a sync result could instead be followed by another result type. In such cases,
discardUntilSync() mishandled the results, leading to the assertion failure.
This commit fixes the issue by making discardUntilSync() correctly handle cases
where a pipeline sync result is followed by other result types. It now continues
discarding results until another pipeline sync followed by NULL is reached.
Backpatched to v17, where support for \syncpipeline command in pgbench was
introduced.
Author: Yugo Nagata <nagata@sraoss.co.jp>
Reviewed-by: Chao Li <lic@highgo.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/20251111105037.f3fc554616bc19891f926c5b@sraoss.co.jp
Backpatch-through: 17
This reverts commit 1fd981f053, based on concerns that the logging
improvements do not justify the protocol breakage of dropping an unnamed
portal once its execution has completed.
It seems unlikely that one would try to send an execute or describe
message after the portal has been used, but if they do such
post-completion messages would not be able to process as the previous
versions. Let's revert this change for now so as we keep compatibility
and consider a different solution.
The tests added by 76bba03312 track the pre-1fd981f05369 behavior, and
are still valid.
Discussion: https://postgr.es/m/CA+TgmoYFJyJNQw3RT7veO3M2BWRE9Aw4hprC5rOcawHZti-f8g@mail.gmail.com
While the underlying getaddrinfo call accepts a null pointer for
the hintp parameter, pg_getaddrinfo_all does not. Document this
difference with a comment to make it clear.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reported-by: Sergey Tatarintsev <s.tatarintsev@postgrespro.ru>
Discussion: https://postgr.es/m/1e5efc94-407e-40b8-8b10-4d25f823c6d7@postgrespro.ru
Issue introduced by 84fb27511d. I have missed this diff while
adding pgoff_t to the typedef list of pgindent, while addressing a
separate indentation issue.
Per buildfarm member koel.
PostgreSQL's Windows port has never been able to handle files larger
than 2GB due to the use of off_t for file offsets, only 32-bit on
Windows. This causes signed integer overflow at exactly 2^31 bytes when
trying to handle files larger than 2GB, for the routines touched by this
commit.
Note that large files are forbidden by ./configure (3c6248a828) and
meson (recent change, see 79cd66f28c). This restriction also exists
in v16 and older versions for the now-dead MSVC scripts.
The code base already defines pgoff_t as __int64 (64-bit) on Windows for
this purpose, and some function declarations in headers use it, but many
internals still rely on off_t. This commit switches more routines to
use pgoff_t, offering more portability, for areas mainly related to file
extensions and storage.
These are not critical for WAL segments yet, which have currently a
maximum size allowed of 1GB (well, this opens the door at allowing a
larger size for them). This matters more for segment files if we want
to lift the large file restriction in ./configure and meson in the
future, which would make sense to remove once/if all traces of off_t are
gone from the tree. This can additionally matter for out-of-core code
that may want files larger than 2GB in places where off_t is four bytes
in size.
Note that off_t is still used in other parts of the tree like
buffile.c, WAL sender/receiver, base backup, pg_combinebackup, etc.
These other code paths can be addressed separately, and their update
will be required if we want to remove the large file restriction in the
future. This commit is a good first cut in itself towards more
portability, hopefully.
On Unix-like systems, pgoff_t is defined as off_t, so this change only
affects Windows behavior.
Author: Bryan Green <dbryan.green@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/0f238ff4-c442-42f5-adb8-01b762c94ca1@gmail.com
pg_logical_slot_get_changes_guts() previously assigned InvalidXLogRecPtr to
the local variable upto_nchanges, which is of type int32, not XLogRecPtr.
While this caused no functional issue since InvalidXLogRecPtr is defined as 0,
it was semantically incorrect.
This commit fixes the issue by updating pg_logical_slot_get_changes_guts()
to set upto_nchanges to 0 instead of InvalidXLogRecPtr.
No backpatch is needed, as the previous behavior was harmless.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Steven Niu <niushiji@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/CAHGQGwHKHuR5NGnGxU3+ebz7cbC1ZAR=AgG4Bueq==Lj6iX8Sw@mail.gmail.com
This comment seems to refer to some stuff that was removed during
development in 2005.
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/aRJFDxKJLFE_1Iai%40nathan
Since this is a test module, leaking a couple of LWLock tranches is
fine, but we want to discourage that pattern in third-party code.
This commit teaches the module to create only one tranche and to
store its ID in shared memory for use by other backends.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/dd36d384-55df-4fc2-825c-5bc56c950fa9%40gmail.com
If DSM entry initialization fails, backends could try to use an
uninitialized DSM segment, DSA, or dshash table (since the entry is
still added to the registry). To fix, keep track of whether
initialization completed, and ERROR if a backend tries to attach to
an uninitialized entry. We could instead retry initialization as
needed, but that seemed complicated, error prone, and unlikely to
help most cases. Furthermore, such problems probably indicate a
coding error.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/dd36d384-55df-4fc2-825c-5bc56c950fa9%40gmail.com
Backpatch-through: 17
Before we started to freeze async notify entries (commit 8eeb4a0f7c),
no one looked at the 'xid' on an entry with invalid 'dboid'. But now
we might actually need to freeze it later. Initialize them with
InvalidTransactionId to begin with, to avoid that work later.
Álvaro pointed this out in review of commit 8eeb4a0f7c, but I forgot
to include this change there.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://www.postgresql.org/message-id/202511071410.52ll56eyixx7@alvherre.pgsql
Backpatch-through: 14
Previous commit fixed a bug where VACUUM would truncate the CLOG
that's still needed to check the commit status of XIDs in the async
notify queue, but as mentioned in the commit message, it wasn't a full
fix. If a backend is executing asyncQueueReadAllNotifications() and
has just made a local copy of an async SLRU page which contains old
XIDs, vacuum can concurrently truncate the CLOG covering those XIDs,
and the backend still gets an error when it calls
TransactionIdDidCommit() on those XIDs in the local copy. This commit
fixes that race condition.
To fix, hold the SLRU bank lock across the TransactionIdDidCommit()
calls in NOTIFY processing.
Per Tom Lane's idea. Backpatch to all supported versions.
Reviewed-by: Joel Jacobson <joel@compiler.org>
Reviewed-by: Arseniy Mukhin <arseniy.mukhin.dev@gmail.com>
Discussion: https://www.postgresql.org/message-id/2759499.1761756503@sss.pgh.pa.us
Backpatch-through: 14
The async notification queue contains the XID of the sender, and when
processing notifications we call TransactionIdDidCommit() on the
XID. But we had no safeguards to prevent the CLOG segments containing
those XIDs from being truncated away. As a result, if a backend didn't
for some reason process its notifications for a long time, or when a
new backend issued LISTEN, you could get an error like:
test=# listen c21;
ERROR: 58P01: could not access status of transaction 14279685
DETAIL: Could not open file "pg_xact/000D": No such file or directory.
LOCATION: SlruReportIOError, slru.c:1087
To fix, make VACUUM "freeze" the XIDs in the async notification queue
before truncating the CLOG. Old XIDs are replaced with
FrozenTransactionId or InvalidTransactionId.
Note: This commit is not a full fix. A race condition remains, where a
backend is executing asyncQueueReadAllNotifications() and has just
made a local copy of an async SLRU page which contains old XIDs, while
vacuum concurrently truncates the CLOG covering those XIDs. When the
backend then calls TransactionIdDidCommit() on those XIDs from the
local copy, you still get the error. The next commit will fix that
remaining race condition.
This was first reported by Sergey Zhuravlev in 2021, with many other
people hitting the same issue later. Thanks to:
- Alexandra Wang, Daniil Davydov, Andrei Varashen and Jacques Combrink
for investigating and providing reproducable test cases,
- Matheus Alcantara and Arseniy Mukhin for review and earlier proposed
patches to fix this,
- Álvaro Herrera and Masahiko Sawada for reviews,
- Yura Sokolov aka funny-falcon for the idea of marking transactions
as committed in the notification queue, and
- Joel Jacobson for the final patch version. I hope I didn't forget
anyone.
Backpatch to all supported versions. I believe the bug goes back all
the way to commit d1e027221d, which introduced the SLRU-based async
notification queue.
Discussion: https://www.postgresql.org/message-id/16961-25f29f95b3604a8a@postgresql.org
Discussion: https://www.postgresql.org/message-id/18804-bccbbde5e77a68c2@postgresql.org
Discussion: https://www.postgresql.org/message-id/CAK98qZ3wZLE-RZJN_Y%2BTFjiTRPPFPBwNBpBi5K5CU8hUHkzDpw@mail.gmail.com
Backpatch-through: 14
Previously, if async notify processing encountered an error, we would
report the error to the client and advance our read position past the
offending entry to prevent trying to process it over and over
again. Trying to continue after an error has a few problems however:
- We have no way of telling the client that a notification was
lost. They get an ERROR, but that doesn't tell you much. As such,
it's not clear if keeping the connection alive after losing a
notification is a good thing. Depending on the application logic,
missing a notification could cause the application to get stuck
waiting, for example.
- If the connection is idle, PqCommReadingMsg is set and any ERROR is
turned into FATAL anyway.
- We bailed out of the notification processing loop on first error
without processing any subsequent notifications. The subsequent
notifications would not be processed until another notify interrupt
arrives. For example, if there were two notifications pending, and
processing the first one caused an ERROR, the second notification
would not be processed until someone sent a new NOTIFY.
This commit changes the behavior so that any ERROR while processing
async notifications is turned into FATAL, causing the client
connection to be terminated. That makes the behavior more consistent
as that's what happened in idle state already, and terminating the
connection is a clear signal to the application that it might've
missed some notifications.
The reason to do this now is that the next commits will change the
notification processing code in a way that would make it harder to
skip over just the offending notification entry on error.
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Arseniy Mukhin <arseniy.mukhin.dev@gmail.com>
Discussion: https://www.postgresql.org/message-id/fedbd908-4571-4bbe-b48e-63bfdcc38f64@iki.fi
Backpatch-through: 14
This creates a src/backend/catalog/pg_tablespace.c supporting file
containing a new function get_tablespace_location(), which lets the code
underlying pg_tablespace_location() be reused for other purposes.
Author: Manni Wood <manni.wood@enterprisedb.com>
Author: Nishant Sharma <nishant.sharma@enterprisedb.com>
Reviewed-by: Vaibhav Dalvi <vaibhav.dalvi@enterprisedb.com>
Reviewed-by: Ian Lawrence Barwick <barwick@gmail.com>
Reviewed-by: Jim Jones <jim.jones@uni-muenster.de>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/CAKWEB6rmnmGKUA87Zmq-s=b3Scsnj02C0kObQjnbL2ajfPWGEw@mail.gmail.com
The range for commit_siblings was incorrectly listed as starting on 1
instead of 0 in the sample configuration file. Backpatch down to all
supported branches.
Author: Man Zeng <zengman@halodbtech.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/tencent_53B70BA72303AE9C6889E78E@qq.com
Backpatch-through: 14
In order to make the errorhandling code in backend libpq be thread-
safe the global variable used by the certificate verification call-
back need to be replaced with passing private data.
This moves the threadsafety needle a little but forwards, the call
to strerror_r also needs to be replaced with the error buffer made
thread local. This is left as future work for when add the thread
primitives required for this to the tree.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/353226C7-97A1-4507-A380-36AA92983AE6@yesql.se
Instead of having to write a semicolon inside the macro argument, we can
insert a semicolon with another macro layer. This no longer gives
pg_bsd_indent indigestion, so we can remove the digestive aids that had
to be installed in the pgindent Perl script.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/202511111134.njrwf5w5nbjm@alvherre.pgsql
Backpatch-through: 18
pg_resetwal didn't accept multixid 0 or multixact offset UINT32_MAX,
but they are both valid values that can appear in the control file.
That caused pg_upgrade to fail if you tried to upgrade a cluster
exactly at multixid or offset wraparound, because pg_upgrade calls
pg_resetwal to restore multixid/offset on the new cluster to the
values from the old cluster. To fix, allow those values in
pg_resetwal.
Fixes bugs #18863 and #18865 reported by Dmitry Kovalenko.
Backpatch down to v15. Version 14 has the same bug, but the patch
doesn't apply cleanly there. It could be made to work but it doesn't
seem worth the effort given how rare it is to hit this problem with
pg_upgrade, and how few people are upgrading to v14 anymore.
Author: Maxim Orlov <orlovmg@gmail.com>
Discussion: https://www.postgresql.org/message-id/CACG%3DezaApSMTjd%3DM2Sfn5Ucuggd3FG8Z8Qte8Xq9k5-%2BRQis-g@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/18863-72f08858855344a2@postgresql.org
Discussion: https://www.postgresql.org/message-id/18865-d4c66cf35c2a67af@postgresql.org
Backpatch-through: 15
This new file is named pg_dependencies.c and includes all the code
directly related to the data type pg_dependencies, extracted from the
extended statistics code.
Some patches are under discussion to change its input and output
functions, and this separation makes the follow-up changes cleaner by
separating the logic related to the data type and the functional
dependencies statistics core logic in dependencies.c.
Author: Corey Huinker <corey.huinker@gmail.com>
Co-authored-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/aQ2k8--a0FfwSwX9@paquier.xyz
This new file is named pg_ndistinct.c and includes all the code directly
related to the data type pg_ndistinct, extracted from the extended
statistics code.
Some patches are under discussion to change its input and output
functions, and this separation makes the follow-up changes cleaner by
separating the logic related to the data type and the multivariate
ndistinct coefficient core logic in mvdistinct.c.
Author: Corey Huinker <corey.huinker@gmail.com>
Co-authored-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/aQ2k8--a0FfwSwX9@paquier.xyz
Previously we had both in code and comments. Keep the more common and
accepted variant.
Author: Chao Li <lic@highgo.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/5EBF1771-0566-4D08-9F9B-CDCDEF4BDC98@gmail.com
The maximum limits for point name, library name, function name and
private area size were not kept track of in the tests. The new function
introduced in 16a2f70695 gives a way to trigger them. This is not
critical but cheap to cover.
While on it, this commit cleans up some of the tests introduced by
16a2f70695 for NULL inputs by using more consistent argument values.
The coverage does not change, but it makes the whole less confusing with
argument values that are correct based their position in the SQL
function called.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/aRE7zhu6wOA29gFf@paquier.xyz
Previously, error messages for oversized injection point names, libraries,
and functions showed buffer sizes (64, 128, 128) instead of the usable
character limits (63, 127, 127) as it did not count for the
zero-terminated byte, which was confusing. These messages are adjusted
to show better the reality.
The limit enforced for the private area was also too strict by one byte,
as specifying a zone worth exactly INJ_PRIVATE_MAXLEN should be able to
work because three is no zero-terminated byte in this case.
This is a stylistic change (well, mostly, a private_area size of exactly
1024 bytes can be defined with this change, something that nobody seem
to care about based on the lack of complaints). However, this is a
testing facility let's keep the logic consistent across all the branches
where this code exists, as there is an argument in favor of out-of-core
extensions that use injection points.
Author: Xuneng Zhou <xunengzhou@gmail.com>
Co-authored-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CABPTF7VxYp4Hny1h+7ejURY-P4O5-K8WZg79Q3GUx13cQ6B2kg@mail.gmail.com
Backpatch-through: 17
If you run pg_controldata on a cluster that has been initialized with
different PG_CONTROL_VERSION than what the pg_controldata program has
been compiled with, pg_controldata will still try to interpret the
control file, but the result is likely to be somewhat nonsensical. How
nonsensical it is depends on the differences between the versions. If
sizeof(ControlFileData) differs between the versions, the CRC will not
match and you get a warning of that, but otherwise you get no
warning.
Looking back at recent PG_CONTROL_VERSION updates, all changes that
would mess up the printed values have also changed
sizeof(ControlFileData), but there's no guarantee of that in future
versions.
Add an explicit check and warning for version number mismatch before
the CRC check. That way, you get a more clear warning if you use the
pg_controldata binary from wrong version, and if we change the control
file in the future in a way that doesn't change
sizeof(ControlFileData), this ensures that you get a warning in that
case too.
Discussion: https://www.postgresql.org/message-id/2afded89-f9f0-4191-84d8-8b8668e029a1@iki.fi
guc_var_compare() is invoked from qsort() on an array of struct
config_generic, but the function accesses these directly as
strings (char *). This relies on the name being the first field, so
this works. But we can write this more clearly by using the struct
and then accessing the field through the struct. Before the
reorganization of the GUC structs (commit a13833c35f), the old code
was probably more convenient, but now we can write this more clearly
and correctly.
After this change, it is no longer required that the name is the first
field in struct config_generic, so remove that comment.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/2c961fa1-14f6-44a2-985c-e30b95654e8d%40eisentraut.org
Commit 3e0ae46d90 added a field to ControlFileData and bumped
CATALOG_VERSION_NO, but CATALOG_VERSION_NO is not the right version
number for ControlFileData changes. Bumping either one will force an
initdb, but PG_CONTROL_VERSION is more accurate. Bump
PG_CONTROL_VERSION now.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/1874404.1762787779@sss.pgh.pa.us
This omission allowed table owners to create statistics in any
schema, potentially leading to unexpected naming conflicts. For
ALTER TABLE commands that require re-creating statistics objects,
skip this check in case the user has since lost CREATE on the
schema. The addition of a second parameter to CreateStatistics()
breaks ABI compatibility, but we are unaware of any impacted
third-party code.
Reported-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Co-authored-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Security: CVE-2025-12817
Backpatch-through: 13
Several functions could overflow their size calculations, when presented
with very large inputs from remote and/or untrusted locations, and then
allocate buffers that were too small to hold the intended contents.
Switch from int to size_t where appropriate, and check for overflow
conditions when the inputs could have plausibly originated outside of
the libpq trust boundary. (Overflows from within the trust boundary are
still possible, but these will be fixed separately.) A version of
add_size() is ported from the backend to assist with code that performs
more complicated concatenation.
Reported-by: Aleksey Solovev (Positive Technologies)
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Security: CVE-2025-12818
Backpatch-through: 13
It seems plausible that someone might want to experiment with
different values. The pressing reason though is that I'm reviewing a
patch that requires pg_upgrade to manipulate SLRU files. That patch
needs to access SLRU_PAGES_PER_SEGMENT from pg_upgrade code, and
slru.h, where SLRU_PAGES_PER_SEGMENT is currently defined, cannot be
included from frontend code. Moving it to pg_config_manual.h makes it
accessible.
Now that it's a little more likely that someone might change
SLRU_PAGES_PER_SEGMENT, add a cluster compatibility check for it.
Bump catalog version because of the new field in the control file.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://www.postgresql.org/message-id/c7a4ea90-9f7b-4953-81be-b3fcb47db057@iki.fi
While there are many tests related to relation rewrites, nothing existed
to check how the cumulative statistics behave in such cases for
relations.
A different patch is under discussion to move the relation statistics to
be tracked on a per-relfilenode basis, so as these could be rebuilt
during crash recovery. This commit gives us a way to check (and perhaps
change) the existing behaviors for several rewrite scenarios, mixing
transactions, sub-transactions, two-phase commit and VACUUM.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/aQ3X20hbqoThQXgp@ip-10-97-1-34.eu-west-3.compute.internal
This new function is able to take in input more data than the existing
injection_point_attach():
- A library name.
- A function name.
- Some private data.
This gives more flexibility for tests so as these would not need to
reinvent a wrapper for InjectionPointAttach() when attaching a callback
from a library other than "injection_points". injection_point_detach()
can be used with both versions of injection_point_attach().
Author: Rahila Syed <rahilasyed.90@gmail.com>
Reviewed-by: Mihail Nikalayeu <mihailnikalayeu@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAH2L28sOG2b_TKkZU51dy+pWJtny1mqDmeFiFoUASGa0X0iiKQ@mail.gmail.com
generic-gcc.h maps our read and write barriers to C11 acquire and
release fences using compiler builtins, for platforms where we don't
have our own hand-rolled assembler. This is apparently enough for GCC,
but the C11 memory model is only defined in terms of atomic accesses,
and our barriers for non-atomic, non-volatile accesses were not always
respected under Clang's stricter interpretation of the standard.
This explains the occasional breakage observed on new RISC-V + Clang
animal greenfly in lock-free PgAioHandle manipulation code containing a
repeating pattern of loads and read barriers. The problem can also be
observed in code generated for MIPS and LoongAarch, though we aren't
currently testing those with Clang, and on x86, though we use our own
assembler there. The scariest aspect is that we use the generic version
on very common ARM systems, but it doesn't seem to reorder the relevant
code there (or we'd have debugged this long ago).
Fix by inserting an explicit compiler barrier. It expands to an empty
assembler block declared to have memory side-effects, so registers are
flushed and reordering is prevented. In those respects this is like the
architecture-specific assembler versions, but the compiler is still in
charge of generating the appropriate fence instruction. Done for write
barriers on principle, though concrete problems have only been observed
with read barriers.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Tested-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/d79691be-22bd-457d-9d90-18033b78c40a%40gmail.com
Backpatch-through: 13
This commit adds the --continue-on-error option, allowing pgbench clients
to continue running even when SQL statements fail for reasons other than
serialization or deadlock errors. Without this option (by default),
the clients aborts in such cases, which was the only available behavior
previously.
This option is useful for benchmarks using custom scripts that may
raise errors, such as unique constraint violations, where users want
pgbench to complete the run despite individual statement failures.
Author: Rintaro Ikeda <ikedarintarof@oss.nttdata.com>
Co-authored-by: Yugo Nagata <nagata@sraoss.co.jp>
Co-authored-by: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Stepan Neretin <slpmcf@gmail.com>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Srinath Reddy Sadipiralla <srinath2133@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Reviewed-by: Chao Li <lic@highgo.com>
Discussion: https://postgr.es/m/44334231a4d214fac382a69cceb7d9fc@oss.nttdata.com
This warning was disabled in meson.build (warning 4273). If you
enable it, it looks like this:
../src/backend/utils/misc/ps_status.c(27): warning C4273: '__p__environ': inconsistent dll linkage
C:\Program Files (x86)\Windows Kits\10\include\10.0.22621.0\ucrt\stdlib.h(1158): note: see previous definition of '__p__environ'
The declaration in ps_status.c was:
#if !defined(WIN32) || defined(_MSC_VER)
extern char **environ;
#endif
The declaration in the OS header file is:
_DCRTIMP char*** __cdecl __p__environ (void);
#define _environ (*__p__environ())
So it is evident that this could be problematic.
The old declaration was required by the old MSVCRT library, but we
don't support that anymore with MSVC.
To fix, disable the re-declaration in ps_status.c, and also in some
other places that use the same code pattern but didn't trigger the
warning.
Then we can also re-enable the warning (delete the disablement in
meson.build).
Reviewed-by: Bryan Green <dbryan.green@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/bf060644-47ff-441b-97cf-c685d0827757@eisentraut.org
This commit adds a new column, seq_sync_error_count, to the
pg_stat_subscription_stats view. This counter tracks the number of errors
encountered by the sequence synchronization worker during operation.
Since a single worker handles the synchronization of all sequences, this
value may reflect errors from multiple sequences. This addition improves
observability of sequence synchronization behavior and helps monitor
potential issues during replication.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CAA4eK1LC+KJiAkSrpE_NwvNdidw9F2os7GERUeSxSKv71gXysQ@mail.gmail.com
The prior commit made it legal to modify BufferDesc.state while the buffer
header spinlock is held. This allows us to replace the CAS loop
inUnpinBufferNoOwner() with an atomic sub. This improves scalability
significantly. See the prior commits for more background.
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/fvfmkr5kk4nyex56ejgxj3uzi63isfxovp2biecb4bspbjrze7@az2pljabhnff
Until now BufferDesc.state was not allowed to be modified while the buffer
header spinlock was held. This meant that operations like unpinning buffers
needed to use a CAS loop, waiting for the buffer header spinlock to be
released before updating.
The benefit of that restriction is that it allowed us to unlock the buffer
header spinlock with just a write barrier and an unlocked write (instead of a
full atomic operation). That was important to avoid regressions in
48354581a4. However, since then the hottest buffer header spinlock uses have
been replaced with atomic operations (in particular, the most common use of
PinBuffer_Locked(), in GetVictimBuffer() (formerly in BufferAlloc()), has been
removed in 5e89985928).
This change will allow, in a subsequent commit, to release buffer pins with a
single atomic-sub operation. This previously was not possible while such
operations were not allowed while the buffer header spinlock was held, as an
atomic-sub would not have allowed a race-free check for the buffer header lock
being held.
Using atomic-sub to unpin buffers is a nice scalability win, however it is not
the primary motivation for this change (although it would be sufficient). The
primary motivation is that we would like to merge the buffer content lock into
BufferDesc.state, which will result in more frequent changes of the state
variable, which in some situations can cause a performance regression, due to
an increased CAS failure rate when unpinning buffers. The regression entirely
vanishes when using atomic-sub.
Naively implementing this would require putting CAS loops in every place
modifying the buffer state while holding the buffer header lock. To avoid
that, introduce UnlockBufHdrExt(), which can set/add flags as well as the
refcount, together with releasing the lock.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/fvfmkr5kk4nyex56ejgxj3uzi63isfxovp2biecb4bspbjrze7@az2pljabhnff
A couple of ereports were making use of StringInfos as temporary storage
for the portions of the WARNING message. One was doing this to avoid
having 2 separate ereports. This was all fairly unnecessary and
resulted in more code rather than less code.
Refactor out the additional StringInfos and make
check_publications_origin_tables() use 2 ereports.
In passing, adjust pubnames to become a stack-allocated StringInfoData to
avoid having to palloc the temporary StringInfoData. This follows on
from the efforts made in 6d0eba662.
Author: Mats Kindahl <mats.kindahl@gmail.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/0b381b02-cab9-41f9-a900-ad6c8d26c1fc%40gmail.com
Now that commit 06edbed478 has introduced XLogRecPtrIsValid(), we can
use that instead of:
- XLogRecPtrIsInvalid()
- direct comparisons with InvalidXLogRecPtr
- direct comparisons with literal 0
This makes the code more consistent.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/aQB7EvGqrbZXrMlg@ip-10-97-1-34.eu-west-3.compute.internal
XLogRecPtrIsInvalid() is inconsistent with the affirmative form of
macros used for other datatypes, and leads to awkward double negatives
in a few places. This commit introduces XLogRecPtrIsValid(), which
allows code to be written more naturally.
This patch only adds the new macro. XLogRecPtrIsInvalid() is left in
place, and all existing callers remain untouched. This means all
supported branches can accept hypothetical bug fixes that use the new
macro, and at the same time any code that compiled with the original
formulation will continue to silently compile just fine.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Backpatch-through: 13
Discussion: https://postgr.es/m/aQB7EvGqrbZXrMlg@ip-10-97-1-34.eu-west-3.compute.internal
... and remove the list of \pset options from the general \? output.
That list was getting out of hand, both for developers to keep up to
date as well as for users to read.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/202511041638.dm4qukcxfjto@alvherre.pgsql
Stored generated columns are not yet computed when the filtering
happens, so we need to prohibit them to avoid incorrect behavior.
Virtual generated columns currently error out ("unexpected virtual
generated column reference"). They could probably work if we expand
them in the right place, but for now let's keep them consistent with
the stored variant. This doesn't change the behavior, it only gives a
nicer error message.
Co-authored-by: jian he <jian.universality@gmail.com>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CACJufxHb8YPQ095R_pYDr77W9XKNaXg5Rzy-WP525mkq+hRM3g@mail.gmail.com
Before commit e25626677f, spinlocks were implemented using semaphores
on some platforms (--disable-spinlocks). That made it necessary to
initialize semaphores early, before any spinlocks could be used. Now
that we don't support --disable-spinlocks anymore, we can allocate the
shared memory needed for semaphores the same way as other shared
memory structures. Since the semaphores are used only in the PGPROC
array, move the semaphore shmem size estimation and initialization
calls to ProcGlobalShmemSize() and InitProcGlobal().
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Discussion: https://www.postgresql.org/message-id/CAExHW5seSZpPx-znjidVZNzdagGHOk06F+Ds88MpPUbxd1kTaA@mail.gmail.com
Test failure on buildfarm member prion:
The test failed due to an unexpected LOCATION: line appearing between the
WARNING and ERROR messages. This occurred because the prion machine uses
log_error_verbosity = verbose, which includes additional context in error
messages. The test was originally checking for both WARNING and ERROR
messages in sequence sync, but the extra LOCATION: line disrupted this
pattern. To make the test robust across different verbosity settings, it
now only checks for the presence of the WARNING message after the test,
which is sufficient to validate the intended behavior.
Failure to sync sequences with quoted names:
The previous implementation did not correctly quote sequence names when
querying remote information, leading to failures when quoted sequence
names were used. This fix ensures that sequence names are properly quoted
during remote queries, allowing sequences with quoted identifiers to be
synced correctly.
Author: Vignesh C <vignesh21@gmail.com>
Author: Shinya Kato <shinya11.kato@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CALDaNm0WcdSCoNPiE-5ek4J2dMJ5o111GPTzKCYj9G5i=ONYtQ@mail.gmail.com
Discussion: https://postgr.es/m/CAOzEurQOSN=Zcp9uVnatNbAy=2WgMTJn_DYszYjv0KUeQX_e_A@mail.gmail.com
Since OpenBSD core dumps do not embed executable paths, the script now
searches for the corresponding binary manually within the specified
directory before invoking LLDB. This is imperfect but should find the
right executable in practice, as needed for meaningful backtraces.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ36R74TZ8RKsFueYwLxGKDAm3LU2FHM_ZUCSB6imd3vYA@mail.gmail.com
Backpatch-through: 18
Like relation_stats.c, these structures are used to track the argument
number, names and types of pg_restore_attribute_stats() and
pg_clear_attribute_stats().
Extracted from a larger patch by the same author, reworded by me for
consistency with relation_stats.c.
Author: Corey Huinker <corey.huinker@gmail.com>
Discussion: https://postgr.es/m/CADkLM=dpz3KFnqP-dgJ-zvRvtjsa8UZv8wDAQdqho=qN3kX0Zg@mail.gmail.com
03d40e4b5 added code to provide better row estimates for when a UNION
query ended up only with a single child due to other children being
found to be dummy rels. In that case, ordinarily it would be ok to call
estimate_num_groups() on the targetlist of the only child path, however
that's not safe to do if the UNION child is the result of some other set
operation as we generate targetlists containing Vars with varno==0 for
those, which estimate_num_groups() can't handle. This could lead to:
ERROR: XX000: no relation entry for relid 0
Fix this by avoiding doing this when the only child is the result of
another set operation. In that case we'll fall back on the
assume-all-rows-are-unique method.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/cfbc99e5-9d44-4806-ba3c-f36b57a85e21@gmail.com
Various places that were using StringInfo but didn't need that
StringInfo to exist beyond the scope of the function were using
makeStringInfo(), which allocates both a StringInfoData and the buffer it
uses as two separate allocations. It's more efficient for these cases to
use a StringInfoData on the stack and initialize it with initStringInfo(),
which only allocates the string buffer. This also simplifies the cleanup,
in a few cases.
Author: Mats Kindahl <mats.kindahl@gmail.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/4379aac8-26f1-42f2-a356-ff0e886228d3@gmail.com
We've successfully used libsanitizer for awhile with the undefined
and alignment sanitizers, but with some other sanitizers (at least
thread and hwaddress) it crashes due to internal recursion before
it's fully initialized itself. It turns out that that's due to the
"__ubsan_default_options" hack installed by commit f686ae82f, and we
can fix it by ensuring that __ubsan_default_options is built without
any sanitizer instrumentation hooks.
Reported-by: Emmanuel Sibi <emmanuelsibi.mec@gmail.com>
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Diagnosed-by: Emmanuel Sibi <emmanuelsibi.mec@gmail.com>
Fix-suggested-by: Jacob Champion <jacob.champion@enterprisedb.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/F7543B04-E56C-4D68-A040-B14CCBAD38F1@gmail.com
Discussion: https://postgr.es/m/dbf77bf7-6e54-ed8a-c4ae-d196eeb664ce@gmail.com
Backpatch-through: 16
WAIT FOR is to be used on standby and specifies waiting for
the specific WAL location to be replayed. This option is useful when
the user makes some data changes on primary and needs a guarantee to see
these changes are on standby.
WAIT FOR needs to wait without any snapshot held. Otherwise, the snapshot
could prevent the replay of WAL records, implying a kind of self-deadlock.
This is why separate utility command seems appears to be the most robust
way to implement this functionality. It's not possible to implement this as
a function. Previous experience shows that stored procedures also have
limitation in this aspect.
Discussion: https://www.postgresql.org/message-id/flat/CAPpHfdsjtZLVzxjGT8rJHCYbM0D5dwkO+BBjcirozJ6nYbOW8Q@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/flat/CABPTF7UNft368x-RgOXkfj475OwEbp%2BVVO-wEXz7StgjD_%3D6sw%40mail.gmail.com
Author: Kartyshov Ivan <i.kartyshov@postgrespro.ru>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: jian he <jian.universality@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Implement a new facility that allows processes to wait for WAL to reach
specific LSNs, both on primary (waiting for flush) and standby (waiting
for replay) servers.
The implementation uses shared memory with per-backend information
organized into pairing heaps, allowing O(1) access to the minimum
waited LSN. This enables fast-path checks: after replaying or flushing
WAL, the startup process or WAL writer can quickly determine if any
waiters need to be awakened.
Key components:
- New xlogwait.c/h module with WaitForLSNReplay() and WaitForLSNFlush()
- Separate pairing heaps for replay and flush waiters
- WaitLSN lightweight lock for coordinating shared state
- Wait events WAIT_FOR_WAL_REPLAY and WAIT_FOR_WAL_FLUSH for monitoring
This infrastructure can be used by features that need to wait for WAL
operations to complete.
Discussion: https://www.postgresql.org/message-id/flat/CAPpHfdsjtZLVzxjGT8rJHCYbM0D5dwkO+BBjcirozJ6nYbOW8Q@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/flat/CABPTF7UNft368x-RgOXkfj475OwEbp%2BVVO-wEXz7StgjD_%3D6sw%40mail.gmail.com
Author: Kartyshov Ivan <i.kartyshov@postgrespro.ru>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
The existing pairingheap_allocate() uses palloc(), which allocates
from process-local memory. For shared memory use cases, the pairingheap
structure must be allocated via ShmemAlloc() or embedded in a shared
memory struct. Add pairingheap_initialize() to initialize an already-
allocated pairingheap structure in-place, enabling shared memory usage.
Discussion: https://www.postgresql.org/message-id/flat/CAPpHfdsjtZLVzxjGT8rJHCYbM0D5dwkO+BBjcirozJ6nYbOW8Q@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/flat/CABPTF7UNft368x-RgOXkfj475OwEbp%2BVVO-wEXz7StgjD_%3D6sw%40mail.gmail.com
Author: Kartyshov Ivan <i.kartyshov@postgrespro.ru>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
In generate_orderedappend_paths(), the function does not handle the
case where the paths in total_subpaths and fractional_subpaths are
identical. This situation is not uncommon, and as a result, it may
generate two exactly identical ordered append paths.
Fix by checking whether total_subpaths and fractional_subpaths contain
the same paths, and skipping creation of the ordered append path for
the fractional case when they are identical.
Given the lack of field complaints about this, I'm a bit hesitant to
back-patch, but let's clean it up in HEAD.
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Discussion: https://postgr.es/m/CAMbWs4-OYsgA75tGGiBARt87G0y_z_GBTSLrzudcJxAzndYkYw@mail.gmail.com
In generate_orderedappend_paths(), there is an assumption that a child
relation's row estimate is always greater than zero. There is an
Assert verifying this assumption, and the estimate is also used to
convert an absolute tuple count into a fraction.
However, this assumption is not always valid -- for example, upper
relations can have their row estimates unset, resulting in a value of
zero. This can cause an assertion failure in debug builds or lead to
the tuple fraction being computed as infinity in production builds.
To fix, use the row estimate from the cheapest_total path to compute
the tuple fraction. The row estimate in this path should already have
been forced to a valid value.
In passing, update the comment for generate_orderedappend_paths() to
note that the function also considers the cheapest-fractional case
when not all tuples need to be retrieved. That is, it collects all
the cheapest fractional paths and builds an ordered append path for
each interesting ordering.
Backpatch to v18, where this issue was introduced.
Bug: #19102
Reported-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Discussion: https://postgr.es/m/19102-93480667e1200169@postgresql.org
Backpatch-through: 18
The test introduced by 17b2d5ec75 verifies that a WAL receiver
survives across a timeline jump by searching the server logs for
termination messages. However, it called restart() before the timeline
switch, which kills the WAL receiver and may log the exact message being
checked, hence failing the test. As TAP tests reuse the same log file
across restarts, a rotate_logfile() is used before the restart so as the
log matching check is not impacted by log entries generated by a
previous shutdown.
Recent changes to file handle inheritance altered I/O timing enough to
make this fail consistently while testing another patch.
While on it, this adds an extra check based on a PID comparison. This
test may lead to false positives as it could be possible that the WAL
receiver has processed a timeline jump before the initial PID is
grabbed, but it should be good enough in most cases.
Like 17b2d5ec75, backpatch down to v13.
Author: Bryan Green <dbryan.green@gmail.com>
Co-authored-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/9d00b597-d64a-4f1e-802e-90f9dc394c70@gmail.com
Backpatch-through: 13
This patch introduces sequence synchronization. Sequences that are synced
will have 2 states:
- INIT (needs [re]synchronizing)
- READY (is already synchronized)
A new sequencesync worker is launched as needed to synchronize sequences.
A single sequencesync worker is responsible for synchronizing all
sequences. It begins by retrieving the list of sequences that are flagged
for synchronization, i.e., those in the INIT state. These sequences are
then processed in batches, allowing multiple entries to be synchronized
within a single transaction. The worker fetches the current sequence
values and page LSNs from the remote publisher, updates the corresponding
sequences on the local subscriber, and finally marks each sequence as
READY upon successful synchronization.
Sequence synchronization occurs in 3 places:
1) CREATE SUBSCRIPTION
- The command syntax remains unchanged.
- The subscriber retrieves sequences associated with publications.
- Published sequences are added to pg_subscription_rel with INIT
state.
- Initiate the sequencesync worker to synchronize all sequences.
2) ALTER SUBSCRIPTION ... REFRESH PUBLICATION
- The command syntax remains unchanged.
- Dropped published sequences are removed from pg_subscription_rel.
- Newly published sequences are added to pg_subscription_rel with INIT
state.
- Initiate the sequencesync worker to synchronize only newly added
sequences.
3) ALTER SUBSCRIPTION ... REFRESH SEQUENCES
- A new command introduced for PG19 by f0b3573c3a.
- All sequences in pg_subscription_rel are reset to INIT state.
- Initiate the sequencesync worker to synchronize all sequences.
- Unlike "ALTER SUBSCRIPTION ... REFRESH PUBLICATION" command,
addition and removal of missing sequences will not be done in this
case.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Reviewed-by: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/CAA4eK1LC+KJiAkSrpE_NwvNdidw9F2os7GERUeSxSKv71gXysQ@mail.gmail.com
Previously, unnamed portals were kept until the next Bind message or the
end of the transaction. This could cause temporary files to persist
longer than expected and make logging not reflect the actual SQL
responsible for the temporary file.
This patch changes exec_execute_message() to drop unnamed portals
immediately after execution to completion at the end of an Execute
message, making their removal more aggressive. This forces temporary
file cleanups to happen at the same time as the completion of the portal
execution, with statement logging correctly reflecting to which
statements these temporary files were attached to (see the diffs in the
TAP test updated by this commit for an idea).
The documentation is updated to describe the lifetime of unnamed
portals, and test cases are updated to verify temporary file removal and
proper statement logging after unnamed portal execution. This changes
how unnamed portals are handled in the protocol, hence no backpatch is
done.
Author: Frédéric Yhuel <frederic.yhuel@dalibo.com>
Co-Authored-by: Sami Imseih <samimseih@gmail.com>
Co-Authored-by: Mircea Cadariu <cadariu.mircea@gmail.com>
Discussion: https://postgr.es/m/CAA5RZ0tTrTUoEr3kDXCuKsvqYGq8OOHiBwoD-dyJocq95uEOTQ%40mail.gmail.com
The comment for ChangeVarNodes() refers to a parameter named
change_RangeTblRef, which does not exist in the code.
The comment for ChangeVarNodesExtended() contains an extra space,
while the comment for replace_relid_callback() has an awkward line
break and a typo.
This patch fixes these issues and revises some sentences for smoother
wording.
Oversights in commits ab42d643c and fc069a3a6.
Author: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/CAMbWs480j16HC1JtjKCgj5WshivT8ZJYkOfTyZAM0POjFomJkg@mail.gmail.com
Backpatch-through: 18
These assertions may prove to become useful to make sure that no process
other than the startup process calls the routines where these checks are
added, as we expect that these do not interfere with a WAL receiver
switched to a "stopping" state by a startup process.
The assumption that only the startup process can use this code has
existed for many years, without a check enforcing it.
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/aQmGeVLYl51y1m_0@paquier.xyz
First, the assertions in assign_io_method() were the wrong way round. Second,
the lengthof() assertion checked the length of io_method_options, which is the
wrong array to check and is always longer than pgaio_method_ops_table.
While add it, add a static assert to ensure pgaio_method_ops_table and
io_method_options stay in sync.
Per coverity and Tom Lane.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Backpatch-through: 18
In 2a0faed9d7, which added JIT compilation support for expressions, I
accidentally used sizeof(LLVMBasicBlockRef *) instead of
sizeof(LLVMBasicBlockRef) as part of computing the size of an allocation. That
turns out to have no real negative consequences due to LLVMBasicBlockRef being
a pointer itself (and thus having the same size). It still is wrong and
confusing, so fix it.
Reported by coverity.
Backpatch-through: 13
Allow pg_newlocale_from_collation(C_COLLATION_OID) to work even if
there's no catalog access, which some extensions expect.
Not known to be a bug without extensions involved, but backport to 18.
Also corrects an issue in master with dummy_c_locale (introduced in
commit 5a38104b36) where deterministic was not set. That wasn't a bug,
but could have been if that structure was used more widely.
Reported-by: Alexander Kukushkin <cyberdemn@gmail.com>
Reviewed-by: Alexander Kukushkin <cyberdemn@gmail.com>
Discussion: https://postgr.es/m/CAFh8B=nj966ECv5vi_u3RYij12v0j-7NPZCXLYzNwOQp9AcPWQ@mail.gmail.com
Backpatch-through: 18
This commit adds CHECK_FOR_INTERRUPTS to the shared buffer iteration
loops in EvictRelUnpinnedBuffers and EvictAllUnpinnedBuffers. These
functions, used by pg_buffercache's pg_buffercache_evict_relation and
pg_buffercache_evict_all, can now be interrupted during long-running
operations.
Backpatch to version 18, where these functions and their corresponding
pg_buffercache functions were introduced.
Author: Yuhang Qiu <iamqyh@gmail.com>
Discussion: https://postgr.es/m/8DC280D4-94A2-4E7B-BAB9-C345891D0B78%40gmail.com
Backpatch-through: 18
03d40e4b5 allowed dummy UNION [ALL] children to be removed from the plan
by checking for is_dummy_rel(). That commit neglected to still account
for the relids from the dummy rel so that the correct UPPERREL_SETOP
RelOptInfo could be found and used for adding the Paths to.
Not doing this could result in processing of subsequent UNIONs using the
same RelOptInfo as a previously processed UNION, which could result in
add_path() freeing old Paths that are needed by the previous UNION.
The same fix was independently submitted (2 mins later) by Richard Guo.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/bee34aec-659c-46f1-9ab7-7bbae0b7616c@gmail.com
Commit a95e3d84c0 added ActiveSnapshot push+pop when processing
work-items (BRIN autosummarization), but forgot to handle the case of
a transaction failing during the run, which drops the snapshot untimely.
Fix by making the pop conditional on an element being actually there.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Backpatch-through: 13
Discussion: https://postgr.es/m/202511041648.nofajnuddmwk@alvherre.pgsql
The parallel GIN builds perform "freezing" of TID lists when merging
chunks built earlier. This means determining what part of the list can
no longer change, depending on the last received chunk. The frozen part
can be evicted from memory and written out.
The code attempted to freeze items right before merging the old and new
TID list, after already attempting to trim the current buffer. That
means part of the data may get frozen based on the new TID list, but
will be trimmed later (on next loop). This increases memory usage.
This inverts the order, so that we freeze data first (before trimming).
The benefits are likely relatively small, but it's also virtually free
with no other downsides.
Discussion: https://postgr.es/m/CAHLJuCWDwn-PE2BMZE4Kux7x5wWt_6RoWtA0mUQffEDLeZ6sfA@mail.gmail.com
