outer join clauses. Given, say,
... from a left join b on a.a1 = b.b1 where a.a1 = 42;
we'll deduce a clause b.b1 = 42 and then mark the original join clause
redundant (we can't remove it completely for reasons I don't feel like
squeezing into this log entry). However the original implementation of
that wasn't bulletproof, because clause_selectivity() wouldn't honor
this_selec if given nonzero varRelid --- which in practice meant that
it worked as desired *except* when considering index scan quals. Which
resulted in bogus underestimation of the size of the indexscan result for
an inner indexscan in an outer join, and consequently a possibly bad
choice of indexscan vs. bitmap scan. Fix by introducing an explicit test
into clause_selectivity(). Also, to make sure we don't trigger that test
in corner cases, change the convention to be that this_selec > 1, not
this_selec = 1, means it's been marked redundant. Per trouble report from
Scara Maccai.
Back-patch to 8.2, where the problem was introduced.
clauseless joins of relations that have unexploited join clauses. Rather
than looking at every other base relation in the query, the correct thing is
to examine the other relations in the "initial_rels" list of the current
make_rel_from_joinlist() invocation, because those are what we actually have
the ability to join against. This might be a subset of the whole query in
cases where join_collapse_limit or from_collapse_limit or full joins have
prevented merging the whole query into a single join problem. This is a bit
untidy because we have to pass those rels down through a new PlannerInfo
field, but it's necessary. Per bug #3865 from Oleg Kharin.
sets for outer joins, in the light of bug #3588 and additional thought and
experimentation. The original methodology was fatally flawed for nests of
more than two outer joins: it got the relationships between adjacent joins
right, but didn't always come to the right conclusions about whether a join
could be interchanged with one two or more levels below it. This was largely
caused by a mistaken idea that we should use the min_lefthand + min_righthand
sets of a sub-join as the minimum left or right input set of an upper join
when we conclude that the sub-join can't commute with the upper one. If
there's a still-lower join that the sub-join *can* commute with, this method
led us to think that that one could commute with the topmost join; which it
can't. Another problem (not directly connected to bug #3588) was that
make_outerjoininfo's processing-order-dependent method for enforcing outer
join identity #3 didn't work right: if we decided that join A could safely
commute with lower join B, we dropped all information about sub-joins under B
that join A could perhaps not safely commute with, because we removed B's
entire min_righthand from A's.
To fix, make an explicit computation of all inner join combinations that occur
below an outer join, and add to that the full syntactic relsets of any lower
outer joins that we determine it can't commute with. This method gives much
more direct enforcement of the outer join rearrangement identities, and it
turns out not to cost a lot of additional bookkeeping.
Thanks to Richard Harris for the bug report and test case.
in cases where a sub-SELECT inserts a WHERE clause between two outer joins,
that clause may prevent us from re-ordering the two outer joins. The code
was considering only the joins' own ON-conditions in determining reordering
safety, which is not good enough. Add a "delay_upper_joins" flag to
OuterJoinInfo to flag that we have detected such a clause and higher-level
outer joins shouldn't be permitted to commute with this one. (This might
seem overly coarse, but given the current rules for OJ reordering, it's
sufficient AFAICT.)
The failure case is actually pretty narrow: it needs a WHERE clause within
the RHS of a left join that checks the RHS of a lower left join, but is not
strict for that RHS (else we'd have simplified the lower join to a plain
join). Even then no failure will be manifest unless the planner chooses to
rearrange the join order.
Per bug report from Adam Terrey.
cheapest-startup-cost innerjoin indexscans, and make joinpath.c consider
both of these (when different) as the inside of a nestloop join. The
original design was based on the assumption that indexscan paths always
have negligible startup cost, and so total cost is the only important
figure of merit; an assumption that's obviously broken by bitmap
indexscans. This oversight could lead to choosing poor plans in cases
where fast-start behavior is more important than total cost, such as
LIMIT and IN queries. 8.1-vintage brain fade exposed by an example from
Chuck D.
is in progress on the same hashtable. This seems the least invasive way to
fix the recently-recognized problem that a split could cause the scan to
visit entries twice or (with much lower probability) miss them entirely.
The only field-reported problem caused by this is the "failed to re-find
shared lock object" PANIC in COMMIT PREPARED reported by Michel Dorochevsky,
which was caused by multiply visited entries. However, it seems certain
that mdsync() is vulnerable to missing required fsync's due to missed
entries, and I am fearful that RelationCacheInitializePhase2() might be at
risk as well. Because of that and the generalized hazard presented by this
bug, back-patch all the supported branches.
Along the way, fix pg_prepared_statement() and pg_cursor() to not assume
that the hashtables they are examining will stay static between calls.
This is risky regardless of the newly noted dynahash problem, because
hash_seq_search() has never promised to cope with deletion of table entries
other than the just-returned one. There may be no bug here because the only
supported way to call these functions is via ExecMakeTableFunctionResult()
which will cycle them to completion before doing anything very interesting,
but it seems best to get rid of the assumption. This affects 8.2 and HEAD
only, since those functions weren't there earlier.
JOIN quals, just like WHERE quals, even if they reference every one of the
join's relations. Now that we can reorder outer and inner joins, it's
possible for such a qual to end up being assigned to an outer join plan node,
and we mustn't have it treated as a join qual rather than a filter qual for
the node. (If it were, the join could produce null-extended rows that it
shouldn't.) Per bug report from Pelle Johansson.
involving HashAggregate over SubqueryScan (this is the known case, there
may well be more). The bug is only latent in releases before 8.2 since they
didn't try to access tupletable slots' descriptors during ExecDropTupleTable.
The least bogus fix seems to be to make subqueries share the parent query's
memory context, so that tupdescs they create will have the same lifespan as
those of the parent query. There are comments in the code envisioning going
even further by not having a separate child EState at all, but that will
require rethinking executor access to range tables, which I don't want to
tackle right now. Per bug report from Jean-Pierre Pelletier.
in PITR scenarios. We now WAL-log the replacement of old XIDs with
FrozenTransactionId, so that such replacement is guaranteed to propagate to
PITR slave databases. Also, rather than relying on hint-bit updates to be
preserved, pg_clog is not truncated until all instances of an XID are known to
have been replaced by FrozenTransactionId. Add new GUC variables and
pg_autovacuum columns to allow management of the freezing policy, so that
users can trade off the size of pg_clog against the amount of freezing work
done. Revise the already-existing code that forces autovacuum of tables
approaching the wraparound point to make it more bulletproof; also, revise the
autovacuum logic so that anti-wraparound vacuuming is done per-table rather
than per-database. initdb forced because of changes in pg_class, pg_database,
and pg_autovacuum catalogs. Heikki Linnakangas, Simon Riggs, and Tom Lane.
the SQL spec, viz IS NULL is true if all the row's fields are null, IS NOT
NULL is true if all the row's fields are not null. The former coding got
this right for a limited number of cases with IS NULL (ie, those where it
could disassemble a ROW constructor at parse time), but was entirely wrong
for IS NOT NULL. Per report from Teodor.
I desisted from changing the behavior for arrays, since on closer inspection
it's not clear that there's any support for that in the SQL spec. This
probably needs more consideration.
tables in the query compete for cache space, not just the one we are
currently costing an indexscan for. This seems more realistic, and it
definitely will help in examples recently exhibited by Stefan
Kaltenbrunner. To get the total size of all the tables involved, we must
tweak the handling of 'append relations' a bit --- formerly we looked up
information about the child tables on-the-fly during set_append_rel_pathlist,
but it needs to be done before we start doing any cost estimation, so
push it into the add_base_rels_to_query scan.
that has parameters is always planned afresh for each Bind command,
treating the parameter values as constants in the planner. This removes
the performance penalty formerly often paid for using out-of-line
parameters --- with this definition, the planner can do constant folding,
LIKE optimization, etc. After a suggestion by Andrew@supernews.
can create or modify rules for the table. Do setRuleCheckAsUser() while
loading rules into the relcache, rather than when defining a rule. This
ensures that permission checks for tables referenced in a rule are done with
respect to the current owner of the rule's table, whereas formerly ALTER TABLE
OWNER would fail to update the permission checking for associated rules.
Removal of separate RULE privilege is needed to prevent various scenarios
in which a grantee of RULE privilege could effectively have any privilege
of the table owner. For backwards compatibility, GRANT/REVOKE RULE is still
accepted, but it doesn't do anything. Per discussion here:
http://archives.postgresql.org/pgsql-hackers/2006-04/msg01138.php
by abandoning the idea that it should say SERIAL in the dump. Instead,
dump serial sequences and column defaults just like regular ones.
Add a new backend command ALTER SEQUENCE OWNED BY to let pg_dump recreate
the sequence-to-column dependency that was formerly created "behind the
scenes" by SERIAL. This restores SERIAL to being truly "just a macro"
consisting of component operations that can be stated explicitly in SQL.
Furthermore, the new command allows sequence ownership to be reassigned,
so that old mistakes can be cleaned up.
Also, downgrade the OWNED-BY dependency from INTERNAL to AUTO, since there
is no longer any very compelling argument why the sequence couldn't be
dropped while keeping the column. (This forces initdb, to be sure the
right kinds of dependencies are in there.)
Along the way, add checks to prevent ALTER OWNER or SET SCHEMA on an
owned sequence; you can now only do this indirectly by changing the
owning table's owner or schema. This is an oversight in previous
releases, but probably not worth back-patching.
merely a matter of fixing the error check, since the underlying Portal
infrastructure already handles it. This in turn allows these statements
to be used in some existing plpgsql and plperl contexts, such as a
plpgsql FOR loop. Also, do some marginal code cleanup in places that
were being sloppy about distinguishing SELECT from SELECT INTO.
plpgsql support to come later. Along the way, convert execMain's
SELECT INTO support into a DestReceiver, in order to eliminate some ugly
special cases.
Jonah Harris and Tom Lane
same data type and same typmod, we show that typmod as the output
typmod, rather than generic -1. This responds to several complaints
over the past few years about UNIONs unexpectedly dropping length or
precision info.
that's shorter-lived than the expression state being evaluated in it really
doesn't work :-( --- we end up with fn_extra caches getting deleted while
still in use. Rather than abandon the notion of caching expression state
across domain_in calls altogether, I chose to make domain_in a bit cozier
with ExprContext. All we really need for evaluating variable-free
expressions is an ExprContext, not an EState, so I invented the notion of a
"standalone" ExprContext. domain_in can prevent resource leakages by doing
a ReScanExprContext on this rather than having to free it entirely; so we
can make the ExprContext have the same lifespan (and particularly the same
per_query memory context) as the expression state structs.
temporary context that can be reset when advancing to the next sublist.
This is faster and more thorough at recovering space than the previous
method; moreover it will do the right thing if something in the sublist
tries to register an expression context callback.
(e.g. "INSERT ... VALUES (...), (...), ...") and elsewhere as allowed
by the spec. (e.g. similar to a FROM clause subselect). initdb required.
Joe Conway and Tom Lane.
created in the bootstrap phase proper, rather than added after-the-fact
by initdb. This is cleaner than before because it allows us to retire the
undocumented ALTER TABLE ... CREATE TOAST TABLE command, but the real reason
I'm doing it is so that toast tables of shared catalogs will now have
predetermined OIDs. This will allow a reasonably clean solution to the
problem of locking tables before we load their relcache entries, to appear
in a forthcoming patch.
the opportunity to treat COUNT(*) as a zero-argument aggregate instead
of the old hack that equated it to COUNT(1); this is materially cleaner
(no more weird ANYOID cases) and ought to be at least a tiny bit faster.
Original patch by Sergey Koposov; review, documentation, simple regression
tests, pg_dump and psql support by moi.
eliminate unnecessary code, force initdb because stored rules change
(limit nodes are now supposed to be int8 not int4 expressions).
Update comments and error messages, which still all said 'integer'.
discussion (including making def_arg allow reserved words), add missed
opt_definition for UNIQUE case. Put the reloptions support code in a less
random place (I chose to make a new file access/common/reloptions.c).
Eliminate header inclusion creep. Make the index options functions safely
user-callable (seems like client apps might like to be able to test validity
of options before trying to make an index). Reduce overhead for normal case
with no options by allowing rd_options to be NULL. Fix some unmaintainably
klugy code, including getting rid of Natts_pg_class_fixed at long last.
Some stylistic cleanup too, and pay attention to keeping comments in sync
with code.
Documentation still needs work, though I did fix the omissions in
catalogs.sgml and indexam.sgml.
Open items:
There were a few tangentially related issues that have come up that I think
are TODOs. I'm likely to tackle one or two of these next so I'm interested in
hearing feedback on them as well.
. Constraints currently do not know anything about inheritance. Tom suggested
adding a coninhcount and conislocal like attributes have to track their
inheritance status.
. Foreign key constraints currently do not get copied to new children (and
therefore my code doesn't verify them). I don't think it would be hard to
add them and treat them like CHECK constraints.
. No constraints at all are copied to tables defined with LIKE. That makes it
hard to use LIKE to define new partitions. The standard defines LIKE and
specifically says it does not copy constraints. But the standard already has
an option called INCLUDING DEFAULTS; we could always define a non-standard
extension LIKE table INCLUDING CONSTRAINTS that gives the user the option to
request a copy including constraints.
. Personally, I think the whole attislocal thing is bunk. The decision about
whether to drop a column from children tables or not is something that
should be up to the user and trying to DWIM based on whether there was ever
a local definition or the column was acquired purely through inheritance is
hardly ever going to match up with user expectations.
. And of course there's the whole unique and primary key constraint issue. I
think to get any traction at all on this you have a prerequisite of a real
partitioned table implementation where the system knows what the partition
key is so it can recognize when it's a leading part of an index key.
Greg Stark
clauses containing no variables and no volatile functions. Such a clause
can be used as a one-time qual in a gating Result plan node, to suppress
plan execution entirely when it is false. Even when the clause is true,
putting it in a gating node wins by avoiding repeated evaluation of the
clause. In previous PG releases, query_planner() would do this for
pseudoconstant clauses appearing at the top level of the jointree, but
there was no ability to generate a gating Result deeper in the plan tree.
To fix it, get rid of the special case in query_planner(), and instead
process pseudoconstant clauses through the normal RestrictInfo qual
distribution mechanism. When a pseudoconstant clause is found attached to
a path node in create_plan(), pull it out and generate a gating Result at
that point. This requires special-casing pseudoconstants in selectivity
estimation and cost_qual_eval, but on the whole it's pretty clean.
It probably even makes the planner a bit faster than before for the normal
case of no pseudoconstants, since removing pull_constant_clauses saves one
useless traversal of the qual tree. Per gripe from Phil Frost.
tuple hash table entries. This addresses the problem previously noted
that use of a 'physical tlist' in the input scan node could bloat the
hash table entries far beyond what the planner expects. It's a better
answer than my previous thought of undoing the physical tlist optimization,
because we can also remove columns that are needed to compute the aggregate
functions but aren't part of the grouping column set.
that the Mackert-Lohmann formula applies across all the repetitions of the
nestloop, not just each scan independently. We use the M-L formula to
estimate the number of pages fetched from the index as well as from the table;
that isn't what it was designed for, but it seems reasonably applicable
anyway. This makes large numbers of repetitions look much cheaper than
before, which accords with many reports we've received of overestimation
of the cost of a nestloop. Also, change the index access cost model to
charge random_page_cost per index leaf page touched, while explicitly
not counting anything for access to metapage or upper tree pages. This
may all need tweaking after we get some field experience, but in simple
tests it seems to be giving saner results than before. The main thing
is to get the infrastructure in place to let cost_index() and amcostestimate
functions take repeated scans into account at all. Per my recent proposal.
Note: this patch changes pg_proc.h, but I did not force initdb because
the changes are basically cosmetic --- the system does not look into
pg_proc to decide how to call an index amcostestimate function, and
there's no way to call such a function from SQL at all.
support both FOR UPDATE and FOR SHARE in one command, as well as both
NOWAIT and normal WAIT behavior. The more general code is actually
simpler and cleaner.
not named ones, and replace linear searches of the list with array indexing.
The named-parameter support has been dead code for many years anyway,
and recent profiling suggests that the searching was costing a noticeable
amount of performance for complex queries.
CREATE AGGREGATE aggname (input_type) (parameter_list)
along with the old syntax where the input type was named in the parameter
list. This fits more naturally with the way that the aggregate is identified
in DROP AGGREGATE and other utility commands; furthermore it has a natural
extension to handle multiple-input aggregates, where the basetype-parameter
method would get ugly. In fact, this commit fixes the grammar and all the
utility commands to support multiple-input aggregates; but DefineAggregate
rejects it because the executor isn't fixed yet.
I didn't do anything about treating agg(*) as a zero-input aggregate instead
of artificially making it a one-input aggregate, but that should be considered
in combination with supporting multi-input aggregates.
