Previously, pull_varnos() took the relids of a PlaceHolderVar as being
equal to the relids in its contents, but that fails to account for the
possibility that we have to postpone evaluation of the PHV due to outer
joins. This could result in a malformed plan. The known cases end up
triggering the "failed to assign all NestLoopParams to plan nodes"
sanity check in createplan.c, but other symptoms may be possible.
The right value to use is the join level we actually intend to evaluate
the PHV at. We can get that from the ph_eval_at field of the associated
PlaceHolderInfo. However, there are some places that call pull_varnos()
before the PlaceHolderInfos have been created; in that case, fall back
to the conservative assumption that the PHV will be evaluated at its
syntactic level. (In principle this might result in missing some legal
optimization, but I'm not aware of any cases where it's an issue in
practice.) Things are also a bit ticklish for calls occurring during
deconstruct_jointree(), but AFAICS the ph_eval_at fields should have
reached their final values by the time we need them.
The main problem in making this work is that pull_varnos() has no
way to get at the PlaceHolderInfos. We can fix that easily, if a
bit tediously, in HEAD by passing it the planner "root" pointer.
In the back branches that'd cause an unacceptable API/ABI break for
extensions, so leave the existing entry points alone and add new ones
with the additional parameter. (If an old entry point is called and
encounters a PHV, it'll fall back to using the syntactic level,
again possibly missing some valid optimization.)
Back-patch to v12. The computation is surely also wrong before that,
but it appears that we cannot reach a bad plan thanks to join order
restrictions imposed on the subquery that the PlaceHolderVar came from.
The error only became reachable when commit 4be058fe9 allowed trivial
subqueries to be collapsed out completely, eliminating their join order
restrictions.
Per report from Stephan Springl.
Discussion: https://postgr.es/m/171041.1610849523@sss.pgh.pa.us
In place of three separate but interrelated lists (indexclauses,
indexquals, and indexqualcols), an IndexPath now has one list
"indexclauses" of IndexClause nodes. This holds basically the same
information as before, but in a more useful format: in particular, there
is now a clear connection between an indexclause (an original restriction
clause from WHERE or JOIN/ON) and the indexquals (directly usable index
conditions) derived from it.
We also change the ground rules a bit by mandating that clause commutation,
if needed, be done up-front so that what is stored in the indexquals list
is always directly usable as an index condition. This gets rid of repeated
re-determination of which side of the clause is the indexkey during costing
and plan generation, as well as repeated lookups of the commutator
operator. To minimize the added up-front cost, the typical case of
commuting a plain OpExpr is handled by a new special-purpose function
commute_restrictinfo(). For RowCompareExprs, generating the new clause
properly commuted to begin with is not really any more complex than before,
it's just different --- and we can save doing that work twice, as the
pretty-klugy original implementation did.
Tracking the connection between original and derived clauses lets us
also track explicitly whether the derived clauses are an exact or lossy
translation of the original. This provides a cheap solution to getting
rid of unnecessary rechecks of boolean index clauses, which previously
seemed like it'd be more expensive than it was worth.
Another pleasant (IMO) side-effect is that EXPLAIN now always shows
index clauses with the indexkey on the left; this seems less confusing.
This commit leaves expand_indexqual_conditions() and some related
functions in a slightly messy state. I didn't bother to change them
any more than minimally necessary to work with the new data structure,
because all that code is going to be refactored out of existence in
a follow-on patch.
Discussion: https://postgr.es/m/22182.1549124950@sss.pgh.pa.us
The old name of this file was never a very good indication of what it
was for. Now that there's also access/relation.h, we have a potential
confusion hazard as well, so let's rename it to something more apropos.
Per discussion, "pathnodes.h" is reasonable, since a good fraction of
the file is Path node definitions.
While at it, tweak a couple of other headers that were gratuitously
importing relation.h into modules that don't need it.
Discussion: https://postgr.es/m/7719.1548688728@sss.pgh.pa.us
In some cases a clause attached to an outer join can be pushed down into
the outer join's RHS even though the clause is not degenerate --- this
can happen if we choose to make a parameterized path for the RHS. If
the clause ends up attached to a lower outer join, we'd misclassify it
as being a "join filter" not a plain "filter" condition at that node,
leading to wrong query results.
To fix, teach extract_actual_join_clauses to examine each join clause's
required_relids, not just its is_pushed_down flag. (The latter now
seems vestigial, or at least in need of rethinking, but we won't do
anything so invasive as redefining it in a bug-fix patch.)
This has been wrong since we introduced parameterized paths in 9.2,
though it's evidently hard to hit given the lack of previous reports.
The test case used here involves a lateral function call, and I think
that a lateral reference may be required to get the planner to select
a broken plan; though I wouldn't swear to that. In any case, even if
LATERAL is needed to trigger the bug, it still affects all supported
branches, so back-patch to all.
Per report from Andreas Karlsson. Thanks to Andrew Gierth for
preliminary investigation.
Discussion: https://postgr.es/m/f8128b11-c5bf-3539-48cd-234178b2314d@proxel.se
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
In an RLS query, we must ensure that security filter quals are evaluated
before ordinary query quals, in case the latter contain "leaky" functions
that could expose the contents of sensitive rows. The original
implementation of RLS planning ensured this by pushing the scan of a
secured table into a sub-query that it marked as a security-barrier view.
Unfortunately this results in very inefficient plans in many cases, because
the sub-query cannot be flattened and gets planned independently of the
rest of the query.
To fix, drop the use of sub-queries to enforce RLS qual order, and instead
mark each qual (RestrictInfo) with a security_level field establishing its
priority for evaluation. Quals must be evaluated in security_level order,
except that "leakproof" quals can be allowed to go ahead of quals of lower
security_level, if it's helpful to do so. This has to be enforced within
the ordering of any one list of quals to be evaluated at a table scan node,
and we also have to ensure that quals are not chosen for early evaluation
(i.e., use as an index qual or TID scan qual) if they're not allowed to go
ahead of other quals at the scan node.
This is sufficient to fix the problem for RLS quals, since we only support
RLS policies on simple tables and thus RLS quals will always exist at the
table scan level only. Eventually these qual ordering rules should be
enforced for join quals as well, which would permit improving planning for
explicit security-barrier views; but that's a task for another patch.
Note that FDWs would need to be aware of these rules --- and not, for
example, send an insecure qual for remote execution --- but since we do
not yet allow RLS policies on foreign tables, the case doesn't arise.
This will need to be addressed before we can allow such policies.
Patch by me, reviewed by Stephen Frost and Dean Rasheed.
Discussion: https://postgr.es/m/8185.1477432701@sss.pgh.pa.us
We don't need make_restrictinfo_from_bitmapqual() anymore at all.
generate_bitmap_or_paths() doesn't need to be exported, and we can
drop its rather klugy restriction_only flag.
The planner largely failed to consider the possibility that a
PlaceHolderVar's expression might contain a lateral reference to a Var
coming from somewhere outside the PHV's syntactic scope. We had a previous
report of a problem in this area, which I tried to fix in a quick-hack way
in commit 4da6439bd8, but Antonin Houska
pointed out that there were still some problems, and investigation turned
up other issues. This patch largely reverts that commit in favor of a more
thoroughly thought-through solution. The new theory is that a PHV's
ph_eval_at level cannot be higher than its original syntactic level. If it
contains lateral references, those don't change the ph_eval_at level, but
rather they create a lateral-reference requirement for the ph_eval_at join
relation. The code in joinpath.c needs to handle that.
Another issue is that createplan.c wasn't handling nested PlaceHolderVars
properly.
In passing, push knowledge of lateral-reference checks for join clauses
into join_clause_is_movable_to. This is mainly so that FDWs don't need
to deal with it.
This patch doesn't fix the original join-qual-placement problem reported by
Jeremy Evans (and indeed, one of the new regression test cases shows the
wrong answer because of that). But the PlaceHolderVar problems need to be
fixed before that issue can be addressed, so committing this separately
seems reasonable.
This patch adjusts the treatment of parameterized paths so that all paths
with the same parameterization (same set of required outer rels) for the
same relation will have the same rowcount estimate. We cache the rowcount
estimates to ensure that property, and hopefully save a few cycles too.
Doing this makes it practical for add_path_precheck to operate without
a rowcount estimate: it need only assume that paths with different
parameterizations never dominate each other, which is close enough to
true anyway for coarse filtering, because normally a more-parameterized
path should yield fewer rows thanks to having more join clauses to apply.
In add_path, we do the full nine yards of comparing rowcount estimates
along with everything else, so that we can discard parameterized paths that
don't actually have an advantage. This fixes some issues I'd found with
add_path rejecting parameterized paths on the grounds that they were more
expensive than not-parameterized ones, even though they yielded many fewer
rows and hence would be cheaper once subsequent joining was considered.
To make the same-rowcounts assumption valid, we have to require that any
parameterized path enforce *all* join clauses that could be obtained from
the particular set of outer rels, even if not all of them are useful for
indexing. This is required at both base scans and joins. It's a good
thing anyway since the net impact is that join quals are checked at the
lowest practical level in the join tree. Hence, discard the original
rather ad-hoc mechanism for choosing parameterization joinquals, and build
a better one that has a more principled rule for when clauses can be moved.
The original rule was actually buggy anyway for lack of knowledge about
which relations are part of an outer join's outer side; getting this right
requires adding an outer_relids field to RestrictInfo.
This patch fixes the planner so that it can generate nestloop-with-
inner-indexscan plans even with one or more levels of joining between
the indexscan and the nestloop join that is supplying the parameter.
The executor was fixed to handle such cases some time ago, but the
planner was not ready. This should improve our plans in many situations
where join ordering restrictions formerly forced complete table scans.
There is probably a fair amount of tuning work yet to be done, because
of various heuristics that have been added to limit the number of
parameterized paths considered. However, we are not going to find out
what needs to be adjusted until the code gets some real-world use, so
it's time to get it in there where it can be tested easily.
Note API change for index AM amcostestimate functions. I'm not aware of
any non-core index AMs, but if there are any, they will need minor
adjustments.
substituting a child rel's output expressions into the appendrel's restriction
clauses yields a pseudoconstant restriction. We might be able to skip scanning
that child rel entirely (if we get constant FALSE), or generate a one-time
filter. 8.3 more or less accidentally generated plans that weren't completely
stupid in these cases, but that was only because an extra recursive level of
subquery_planner() always occurred and allowed const-simplification to happen.
8.4's ability to pull up appendrel members with non-Var outputs exposes the
fact that we need to work harder here. Per gripe from Sergey Burladyan.
joins a bit better, ie, understand the differing cost functions for matched
and unmatched outer tuples. There is more that could be done in cost_hashjoin
but this already helps a great deal. Per discussions with Robert Haas.
constants through full joins, as in
select * from tenk1 a full join tenk1 b using (unique1)
where unique1 = 42;
which should generate a fairly cheap plan where we apply the constraint
unique1 = 42 in each relation scan. This had been broken by my patch of
2008-06-27, which is now reverted in favor of a more invasive but hopefully
less incorrect approach. That patch was meant to prevent incorrect extraction
of OR'd indexclauses from OR conditions above an outer join. To do that
correctly we need more information than the outerjoin_delay flag can provide,
so add a nullable_relids field to RestrictInfo that records exactly which
relations are nulled by outer joins that are underneath a particular qual
clause. A side benefit is that we can make the test in create_or_index_quals
more specific: it is now smart enough to extract an OR'd indexclause into the
outer side of an outer join, even though it must not do so in the inner side.
The old coding couldn't distinguish these cases so it could not do either.
representation of equivalence classes of variables. This is an extensive
rewrite, but it brings a number of benefits:
* planner no longer fails in the presence of "incomplete" operator families
that don't offer operators for every possible combination of datatypes.
* avoid generating and then discarding redundant equality clauses.
* remove bogus assumption that derived equalities always use operators
named "=".
* mergejoins can work with a variety of sort orders (e.g., descending) now,
instead of tying each mergejoinable operator to exactly one sort order.
* better recognition of redundant sort columns.
* can make use of equalities appearing underneath an outer join.
clauses containing no variables and no volatile functions. Such a clause
can be used as a one-time qual in a gating Result plan node, to suppress
plan execution entirely when it is false. Even when the clause is true,
putting it in a gating node wins by avoiding repeated evaluation of the
clause. In previous PG releases, query_planner() would do this for
pseudoconstant clauses appearing at the top level of the jointree, but
there was no ability to generate a gating Result deeper in the plan tree.
To fix it, get rid of the special case in query_planner(), and instead
process pseudoconstant clauses through the normal RestrictInfo qual
distribution mechanism. When a pseudoconstant clause is found attached to
a path node in create_plan(), pull it out and generate a gating Result at
that point. This requires special-casing pseudoconstants in selectivity
estimation and cost_qual_eval, but on the whole it's pretty clean.
It probably even makes the planner a bit faster than before for the normal
case of no pseudoconstants, since removing pull_constant_clauses saves one
useless traversal of the qual tree. Per gripe from Phil Frost.
sense and rename to "outerjoin_delayed" to more clearly reflect what it
means). I had decided that it was redundant in 8.1, but the folly of this
is exposed by a bug report from Sebastian Böck. The place where it's
needed is to prevent orindxpath.c from cherry-picking arms of an outer-join
OR clause to form a relation restriction that isn't actually legal to push
down to the relation scan level. There may be some legal cases that this
forbids optimizing, but we'd need much closer analysis to determine it.
planning logic for bitmap indexscans. Partial indexes create corner
cases in which a scan might be done with no explicit index qual conditions,
and the code wasn't handling those cases nicely. Also be a little
tenser about eliminating redundant clauses in the generated plan.
Per report from Dmitry Karasik.
propagated inside an outer join. In particular, given
LEFT JOIN ON (A = B) WHERE A = constant, we cannot conclude that
B = constant at the top level (B might be null instead), but we
can nonetheless put a restriction B = constant into the quals for
B's relation, since no inner-side rows not meeting that condition
can contribute to the final result. Similarly, given
FULL JOIN USING (J) WHERE J = constant, we can't directly conclude
that either input J variable = constant, but it's OK to push such
quals into each input rel. Per recent gripe from Kim Bisgaard.
Along the way, remove 'valid_everywhere' flag from RestrictInfo,
as on closer analysis it was not being used for anything, and was
defined backwards anyway.
of a relation in a flat 'joininfo' list. The former arrangement grouped
the join clauses according to the set of unjoined relids used in each;
however, profiling on test cases involving lots of joins proves that
that data structure is a net loss. It takes more time to group the
join clauses together than is saved by avoiding duplicate tests later.
It doesn't help any that there are usually not more than one or two
clauses per group ...
a new PlannerInfo struct, which is passed around instead of the bare
Query in all the planning code. This commit is essentially just a
code-beautification exercise, but it does open the door to making
larger changes to the planner data structures without having to muck
with the widely-known Query struct.
node, as this behavior is now better done as a bitmap OR indexscan.
This allows considerable simplification in nodeIndexscan.c itself as
well as several planner modules concerned with indexscan plan generation.
Also we can improve the sharing of code between regular and bitmap
indexscans, since they are now working with nigh-identical Plan nodes.
but the code is basically working. Along the way, rewrite the entire
approach to processing OR index conditions, and make it work in join
cases for the first time ever. orindxpath.c is now basically obsolete,
but I left it in for the time being to allow easy comparison testing
against the old implementation.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
with index qual clauses in the Path representation. This saves a little
work during createplan and (probably more importantly) allows reuse of
cached selectivity estimates during indexscan planning. Also fix latent
bug: wrong plan would have been generated for a 'special operator' used
in a nestloop-inner-indexscan join qual, because the special operator
would not have gotten into the list of quals to recheck. This bug is
only latent because at present the special-operator code could never
trigger on a join qual, but sooner or later someone will want to do it.
join conditions in which each OR subclause includes a constraint on
the same relation. This implements the other useful side-effect of
conversion to CNF format, without its unpleasant side-effects. As
per pghackers discussion of a few weeks ago.
first time generate an OR indexscan for a two-column index when the WHERE
condition is like 'col1 = foo AND (col2 = bar OR col2 = baz)' --- before,
the OR had to be on the first column of the index or we'd not notice the
possibility of using it. Some progress towards extracting OR indexscans
from subclauses of an OR that references multiple relations, too, although
this code is #ifdef'd out because it needs more work.
