If libpq ran out of memory while constructing the result set, it would hang,
waiting for more data from the server, which might never arrive. To fix,
distinguish between out-of-memory error and not-enough-data cases, and give
a proper error message back to the client on OOM.
There are still similar issues in handling COPY start messages, but let's
handle that as a separate patch.
Michael Paquier, Amit Kapila and me. Backpatch to all supported versions.
e3f4cfc7 introduced a LWLockHeldByMe() call, without the corresponding
Assert() surrounding it.
Spotted by Coverity.
Backpatch: 9.1+, like the previous commit
These would leak random xlog positions if a walsender used for backup would
a walsender slot previously used by a replication walsender.
In passing also fix a couple of cases where the xlog pointer is directly
compared to zero instead of using XLogRecPtrIsInvalid, noted by
Michael Paquier.
Changing the tablespace of an unlogged relation did not WAL log the
creation and content of the init fork. Thus, after a standby is
promoted, unlogged relation cannot be accessed anymore, with errors
like:
ERROR: 58P01: could not open file "pg_tblspc/...": No such file or directory
Additionally the init fork was not synced to disk, independent of the
configured wal_level, a relatively small durability risk.
Investigation of that problem also brought to light that, even for
permanent relations, the creation of !main forks was not WAL logged,
i.e. no XLOG_SMGR_CREATE record were emitted. That mostly turns out not
to be a problem, because these files were created when the actual
relation data is copied; nonexistent files are not treated as an error
condition during replay. But that doesn't work for empty files, and
generally feels a bit haphazard. Luckily, outside init and main forks,
empty forks don't occur often or are not a problem.
Add the required WAL logging and syncing to disk.
Reported-By: Michael Paquier
Author: Michael Paquier and Andres Freund
Discussion: 20151210163230.GA11331@alap3.anarazel.de
Backpatch: 9.1, where unlogged relations were introduced
Recent releases of libxml2 do not provide error context reports for errors
detected at the very end of the input string. This appears to be a bug, or
at least an infelicity, introduced by the fix for libxml2's CVE-2015-7499.
We can hope that this behavioral change will get undone before too long;
but the security patch is likely to spread a lot faster/further than any
follow-on cleanup, which means this behavior is likely to be present in the
wild for some time to come. As a stopgap, add a variant regression test
expected-file that matches what you get with a libxml2 that acts this way.
As reported in bug #13809 by Alexander Ashurkov, the code for REASSIGN
OWNED hadn't gotten word about user mappings. Deal with them in the
same way default ACLs do, which is to ignore them altogether; they are
handled just fine by DROP OWNED. The other foreign object cases are
already handled correctly by both commands.
Also add a REASSIGN OWNED statement to foreign_data test to exercise the
foreign data objects. (The changes are just before the "cleanup" phase,
so it shouldn't remove any existing live test.)
Reported by Alexander Ashurkov, then independently by Jaime Casanova.
More fuzz testing by Andreas Seltenreich exposed that the planner did not
cope well with chains of lateral references. If relation X references Y
laterally, and Y references Z laterally, then we will have to scan X on the
inside of a nestloop with Z, so for all intents and purposes X is laterally
dependent on Z too. The planner did not understand this and would generate
intermediate joins that could not be used. While that was usually harmless
except for wasting some planning cycles, under the right circumstances it
would lead to "failed to build any N-way joins" or "could not devise a
query plan" planner failures.
To fix that, convert the existing per-relation lateral_relids and
lateral_referencers relid sets into their transitive closures; that is,
they now show all relations on which a rel is directly or indirectly
laterally dependent. This not only fixes the chained-reference problem
but allows some of the relevant tests to be made substantially simpler
and faster, since they can be reduced to simple bitmap manipulations
instead of searches of the LateralJoinInfo list.
Also, when a PlaceHolderVar that is due to be evaluated at a join contains
lateral references, we should treat those references as indirect lateral
dependencies of each of the join's base relations. This prevents us from
trying to join any individual base relations to the lateral reference
source before the join is formed, which again cannot work.
Andreas' testing also exposed another oversight in the "dangerous
PlaceHolderVar" test added in commit 85e5e222b1. Simply rejecting
unsafe join paths in joinpath.c is insufficient, because in some cases
we will end up rejecting *all* possible paths for a particular join, again
leading to "could not devise a query plan" failures. The restriction has
to be known also to join_is_legal and its cohort functions, so that they
will not select a join for which that will happen. I chose to move the
supporting logic into joinrels.c where the latter functions are.
Back-patch to 9.3 where LATERAL support was introduced.
At the end of crash recovery, unlogged relations are reset to the empty
state, using their init fork as the template. The init fork is copied to
the main fork without going through shared buffers. Unfortunately WAL
replay so far has not necessarily flushed writes from shared buffers to
disk at that point. In normal crash recovery, and before the
introduction of 'fast promotions' in fd4ced523 / 9.3, the
END_OF_RECOVERY checkpoint flushes the buffers out in time. But with
fast promotions that's not the case anymore.
To fix, force WAL writes targeting the init fork to be flushed
immediately (using the new FlushOneBuffer() function). In 9.5+ that
flush can centrally be triggered from the code dealing with restoring
full page writes (XLogReadBufferForRedoExtended), in earlier releases
that responsibility is in the hands of XLOG_HEAP_NEWPAGE's replay
function.
Backpatch to 9.1, even if this currently is only known to trigger in
9.3+. Flushing earlier is more robust, and it is advantageous to keep
the branches similar.
Typical symptoms of this bug are errors like
'ERROR: index "..." contains unexpected zero page at block 0'
shortly after promoting a node.
Reported-By: Thom Brown
Author: Andres Freund and Michael Paquier
Discussion: 20150326175024.GJ451@alap3.anarazel.de
Backpatch: 9.1-
While convincing myself that commit 7e19db0c09 would solve both of
the problems recently reported by Andreas Seltenreich, I realized that
add_paths_to_joinrel's handling of LATERAL restrictions could be made
noticeably simpler and faster if we were to retain the minimum possible
parameterization for each joinrel (that is, the set of relids supplying
unsatisfied lateral references in it). We already retain that for
baserels, in RelOptInfo.lateral_relids, so we can use that field for
joinrels too.
This is a back-port of commit edca44b152.
I originally intended not to back-patch that, but additional hacking
in this area turns out to be needed, making it necessary not optional
to compute lateral_relids for joinrels. In preparation for those fixes,
sync the relevant code with HEAD as much as practical. (I did not risk
rearranging fields of RelOptInfo in released branches, however.)
For unclear reasons, this function doesn't always read the expected data
in some old Perl versions. Rewriting it to avoid use of ARGV seems to
dodge the problem, and this version is clearer anyway if you ask me.
In passing, also improve error message in adjacent append_to_file function.
It was possible for the planner to decide to join a LATERAL subquery to
the outer side of an outer join before the outer join itself is completed.
Normally that's fine because of the associativity rules, but it doesn't
work if the subquery contains a lateral reference to the inner side of the
outer join. In such a situation the outer join *must* be done first.
join_is_legal() missed this consideration and would allow the join to be
attempted, but the actual path-building code correctly decided that no
valid join path could be made, sometimes leading to planner errors such as
"failed to build any N-way joins".
Per report from Andreas Seltenreich. Back-patch to 9.3 where LATERAL
support was added.
This way, existing .gitignore entries and makefile clean actions will
automatically apply to the tempdir, should it survive a TAP test run
(which can happen if the user control-C's out of the run, for example).
Michael Paquier, per a complaint from me
We tried to fetch statistics data from the index metapage, which does not
work if the index isn't actually present. If the index is hypothetical,
instead extrapolate some plausible internal statistics based on the index
page count provided by the index-advisor plugin.
There was already some code in gincostestimate() to invent internal stats
in this way, but since it was only meant as a stopgap for pre-9.1 GIN
indexes that hadn't been vacuumed since upgrading, it was pretty crude.
If we want it to support index advisors, we should try a little harder.
A small amount of testing says that it's better to estimate the entry pages
as 90% of the index, not 100%. Also, estimating the number of entries
(keys) as equal to the heap tuple count could be wildly wrong in either
direction. Instead, let's estimate 100 entries per entry page.
Perhaps someday somebody will want the index advisor to be able to provide
these numbers more directly, but for the moment this should serve.
Problem report and initial patch by Julien Rouhaud; modified by me to
invent less-bogus internal statistics. Back-patch to all supported
branches, since we've supported index advisors since 9.0.
The previous coding could overrun the provided buffer size for a very large
input, or lose precision for a very small input. Adopt the methodology
that's been in use in the equivalent backend code for a long time.
Per private report from Bas van Schaik. Back-patch to all supported
branches.
Failure to initially palloc the comboCids array, or to realloc it bigger
when needed, left combocid's data structures in an inconsistent state that
would cause trouble if the top transaction continues to execute. Noted
while examining a user complaint about the amount of memory used for this.
(There's not much we can do about that, but it does point up that repalloc
failure has a non-negligible chance of occurring here.)
In HEAD/9.5, also avoid possible invocation of memcpy() with a null pointer
in SerializeComboCIDState; cf commit 13bba0227.
PQhost() can return NULL in non-error situations, namely when a Unix-socket
connection has been selected by default. That behavior is a tad debatable
perhaps, but for the moment we should make sure that psql copes with it.
Unfortunately, do_connect() failed to: it could pass a NULL pointer to
strcmp(), resulting in crashes on most platforms. This was reported as a
security issue by ChenQin of Topsec Security Team, but the consensus of
the security list is that it's just a garden-variety bug with no security
implications.
For paranoia's sake, I made the keep_password test not trust PQuser or
PQport either, even though I believe those will never return NULL given
a valid PGconn.
Back-patch to all supported branches.
The POSIX standard for tar headers requires archive member sizes to be
printed in octal with at most 11 digits, limiting the representable file
size to 8GB. However, GNU tar and apparently most other modern tars
support a convention in which oversized values can be stored in base-256,
allowing any practical file to be a tar member. Adopt this convention
to remove two limitations:
* pg_dump with -Ft output format failed if the contents of any one table
exceeded 8GB.
* pg_basebackup failed if the data directory contained any file exceeding
8GB. (This would be a fatal problem for installations configured with a
table segment size of 8GB or more, and it has also been seen to fail when
large core dump files exist in the data directory.)
File sizes under 8GB are still printed in octal, so that no compatibility
issues are created except in cases that would have failed entirely before.
In addition, this patch fixes several bugs in the same area:
* In 9.3 and later, we'd defined tarCreateHeader's file-size argument as
size_t, which meant that on 32-bit machines it would write a corrupt tar
header for file sizes between 4GB and 8GB, even though no error was raised.
This broke both "pg_dump -Ft" and pg_basebackup for such cases.
* pg_restore from a tar archive would fail on tables of size between 4GB
and 8GB, on machines where either "size_t" or "unsigned long" is 32 bits.
This happened even with an archive file not affected by the previous bug.
* pg_basebackup would fail if there were files of size between 4GB and 8GB,
even on 64-bit machines.
* In 9.3 and later, "pg_basebackup -Ft" failed entirely, for any file size,
on 64-bit big-endian machines.
In view of these potential data-loss bugs, back-patch to all supported
branches, even though removal of the documented 8GB limit might otherwise
be considered a new feature rather than a bug fix.
The previous way of reconstructing check constraints was to do a separate
"ALTER TABLE ONLY tab ADD CONSTRAINT" for each table in an inheritance
hierarchy. However, that way has no hope of reconstructing the check
constraints' own inheritance properties correctly, as pointed out in
bug #13779 from Jan Dirk Zijlstra. What we should do instead is to do
a regular "ALTER TABLE", allowing recursion, at the topmost table that
has a particular constraint, and then suppress the work queue entries
for inherited instances of the constraint.
Annoyingly, we'd tried to fix this behavior before, in commit 5ed6546cf,
but we failed to notice that it wasn't reconstructing the pg_constraint
field values correctly.
As long as I'm touching pg_get_constraintdef_worker anyway, tweak it to
always schema-qualify the target table name; this seems like useful backup
to the protections installed by commit 5f173040.
In HEAD/9.5, get rid of get_constraint_relation_oids, which is now unused.
(I could alternatively have modified it to also return conislocal, but that
seemed like a pretty single-purpose API, so let's not pretend it has some
other use.) It's unused in the back branches as well, but I left it in
place just in case some third-party code has decided to use it.
In HEAD/9.5, also rename pg_get_constraintdef_string to
pg_get_constraintdef_command, as the previous name did nothing to explain
what that entry point did differently from others (and its comment was
equally useless). Again, that change doesn't seem like material for
back-patching.
I did a bit of re-pgindenting in tablecmds.c in HEAD/9.5, as well.
Otherwise, back-patch to all supported branches.
The target is now named 'bincheck' rather than 'tapcheck' so that it
reflects what is checked instead of the test mechanism. Some of the
logic is improved, making it easier to add further sets of TAP based
tests in future. Also, the environment setting logic is imrpoved.
As discussed on -hackers a couple of months ago.
div_var_fast() postpones propagating carries in the same way as mul_var(),
so it has the same corner-case overflow risk we fixed in 246693e5ae,
namely that the size of the carries has to be accounted for when setting
the threshold for executing a carry propagation step. We've not devised
a test case illustrating the brokenness, but the required fix seems clear
enough. Like the previous fix, back-patch to all active branches.
Dean Rasheed
This back-ports commit 13d856e177 and assorted followon patches
into 9.4 and 9.5. 9.5 and HEAD are now substantially identical in all
the files touched by this commit, except that 010_pg_basebackup.pl has
a few more tests related to the new --slot option. 9.4 has many fewer
TAP tests, but the test infrastructure files are substantially the same,
with the exception that 9.4 lacks the single-tmp-install infrastructure
introduced in 9.5 (commit dcae5facca).
The primary motivation for this patch is to ensure that TAP test case
fixes can be back-patched without hazards of the kind seen in commits
34557f544/06dd4b44f. In principle it should also make the world safe
for running the TAP tests in the buildfarm in these branches; although
we might want to think about back-porting dcae5facca to 9.4 if
we're going to do that for real, because the TAP tests are quite disk
space hungry without it.
Michael Paquier did the back-porting work; original patches were by
him and assorted other people.
Since commit 11e131854f, ruleutils.c has
attempted to ensure that each RTE in a query or plan tree has a unique
alias name. However, the code that was added for this could be quite slow,
even as bad as O(N^3) if N identical RTE names must be replaced, as noted
by Jeff Janes. Improve matters by building a transient hash table within
set_rtable_names. The hash table in itself reduces the cost of detecting a
duplicate from O(N) to O(1), and we can save another factor of N by storing
the number of de-duplicated names already created for each entry, so that
we don't have to re-try names already created. This way is probably a bit
slower overall for small range tables, but almost by definition, such cases
should not be a performance problem.
In principle the same problem applies to the column-name-de-duplication
code; but in practice that seems to be less of a problem, first because
N is limited since we don't support extremely wide tables, and second
because duplicate column names within an RTE are fairly rare, so that in
practice the cost is more like O(N^2) not O(N^3). It would be very much
messier to fix the column-name code, so for now I've left that alone.
An independent problem in the same area was that the de-duplication code
paid no attention to the identifier length limit, and would happily produce
identifiers that were longer than NAMEDATALEN and wouldn't be unique after
truncation to NAMEDATALEN. This could result in dump/reload failures, or
perhaps even views that silently behaved differently than before. We can
fix that by shortening the base name as needed. Fix it for both the
relation and column name cases.
In passing, check for interrupts in set_rtable_names, just in case it's
still slow enough to be an issue.
Back-patch to 9.3 where this code was introduced.
Normally ruleutils prints a whole-row Var as "foo.*". We already knew that
that doesn't work at top level of a SELECT list, because the parser would
treat the "*" as a directive to expand the reference into separate columns,
not a whole-row Var. However, Joshua Yanovski points out in bug #13776
that the same thing happens at top level of a ROW() construct; and some
nosing around in the parser shows that the same is true in VALUES().
Hence, apply the same workaround already devised for the SELECT-list case,
namely to add a forced cast to the appropriate rowtype in these cases.
(The alternative of just printing "foo" was rejected because it is
difficult to avoid ambiguity against plain columns named "foo".)
Back-patch to all supported branches.
The error message wording for AttributeError has changed in Python 3.5.
For the plpython_error test, add a new expected file. In the
plpython_subtransaction test, we didn't really care what the exception
is, only that it is something coming from Python. So use a generic
exception instead, which has a message that doesn't vary across
versions.
In commit 210eb9b743 I centralized libpq's logic for closing down
the backend communication socket, and made the new pqDropConnection
routine always reset the I/O buffers to empty. Many of the call sites
previously had not had such code, and while that amounted to an oversight
in some cases, there was one place where it was intentional and necessary
*not* to flush the input buffer: pqReadData should never cause that to
happen, since we probably still want to process whatever data we read.
This is the true cause of the problem Robert was attempting to fix in
c3e7c24a1d, namely that libpq no longer reported the backend's final
ERROR message before reporting "server closed the connection unexpectedly".
But that only accidentally fixed it, by invoking parseInput before the
input buffer got flushed; and very likely there are timing scenarios
where we'd still lose the message before processing it.
To fix, pass a flag to pqDropConnection to tell it whether to flush the
input buffer or not. On review I think flushing is actually correct for
every other call site.
Back-patch to 9.3 where the problem was introduced. In HEAD, also improve
the comments added by c3e7c24a1d.
At least OpenBSD, NetBSD, and Windows don't support it. This repairs
pg_ctl for listen_addresses='0.0.0.0' and listen_addresses='::'. Since
pg_ctl prefers to test a Unix-domain socket, Windows users are most
likely to need this change. Back-patch to 9.1 (all supported versions).
This could change pg_ctl interaction with loopback-interface firewall
rules. Therefore, in 9.4 and earlier (released branches), activate the
change only on known-affected platforms.
Reported (bug #13611) and designed by Kondo Yuta.
Lookahead and lookbehind constraints aren't allowed to contain backrefs,
and parentheses within them are always considered non-capturing. Or so
says the manual. But the regexp parser forgot about these rules once
inside a parenthesized subexpression, so that constructs like (\w)(?=(\1))
were accepted (but then not correctly executed --- a case like this acted
like (\w)(?=\w), without any enforcement that the two \w's match the same
text). And in (?=((foo))) the innermost parentheses would be counted as
capturing parentheses, though no text would ever be captured for them.
To fix, properly pass down the "type" argument to the recursive invocation
of parse().
Back-patch to all supported branches; it was agreed that silent
misexecution of such patterns is worse than throwing an error, even though
new errors in minor releases are generally not desirable.
The jsonb_path_ops code calculated hash values inconsistently in some cases
involving nested arrays and objects. This would result in queries possibly
not finding entries that they should find, when using a jsonb_path_ops GIN
index for the search. The problem cases involve JSONB values that contain
both scalars and sub-objects at the same nesting level, for example an
array containing both scalars and sub-arrays. To fix, reset the current
stack->hash after processing each value or sub-object, not before; and
don't try to be cute about the outermost level's initial hash.
Correcting this means that existing jsonb_path_ops indexes may now be
inconsistent with the new hash calculation code. The symptom is the same
--- searches not finding entries they should find --- but the specific
rows affected are likely to be different. Users will need to REINDEX
jsonb_path_ops indexes to make sure that all searches work as expected.
Per bug #13756 from Daniel Cheng. Back-patch to 9.4 where the faulty
logic was introduced.
Commit a1480ec1d3 purported to fix the
problems with commit b2ccb5f4e6, but it
didn't completely fix them. The problem is that the checks were
performed in the wrong order, leading to a race condition. If the
sender attached, sent a message, and detached after the receiver
called shm_mq_get_sender and before the receiver called
shm_mq_counterparty_gone, we'd incorrectly return SHM_MQ_DETACHED
before all messages were read. Repair by reversing the order of
operations, and add a long comment explaining why this new logic is
(hopefully) correct.
On insert the CheckForSerializableConflictIn() test was performed
before the page(s) which were going to be modified had been locked
(with an exclusive buffer content lock). If another process
acquired a relation SIReadLock on the heap and scanned to a page on
which an insert was going to occur before the page was so locked,
a rw-conflict would be missed, which could allow a serialization
anomaly to be missed. The window between the check and the page
lock was small, so the bug was generally not noticed unless there
was high concurrency with multiple processes inserting into the
same table.
This was reported by Peter Bailis as bug #11732, by Sean Chittenden
as bug #13667, and by others.
The race condition was eliminated in heap_insert() by moving the
check down below the acquisition of the buffer lock, which had been
the very next statement. Because of the loop locking and unlocking
multiple buffers in heap_multi_insert() a check was added after all
inserts were completed. The check before the start of the inserts
was left because it might avoid a large amount of work to detect a
serialization anomaly before performing the all of the inserts and
the related WAL logging.
While investigating this bug, other SSI bugs which were even harder
to hit in practice were noticed and fixed, an unnecessary check
(covered by another check, so redundant) was removed from
heap_update(), and comments were improved.
Back-patch to all supported branches.
Kevin Grittner and Thomas Munro
Bernd Helmle complained that CreateReplicationSlot() was assigning the
same value to the same variable twice, so we could remove one of them.
Code inspection reveals that we can actually remove both assignments:
according to the author the assignment was there for beauty of the
strlen line only, and another possible fix to that is to put the strlen
in its own line, so do that.
To be consistent within the file, refactor all duplicated strlen()
calls, which is what we do elsewhere in the backend anyway. In
basebackup.c, snprintf already returns the right length; no need for
strlen afterwards.
Backpatch to 9.4, where replication slots were introduced, to keep code
identical. Some of this is older, but the patch doesn't apply cleanly
and it's only of cosmetic value anyway.
Discussion: http://www.postgresql.org/message-id/BE2FD71DEA35A2287EA5F018@eje.credativ.lan
If the counterparty writes some data into the queue and then detaches,
it's wrong to return SHM_MQ_DETACHED right away. If we do that, we
fail to read whatever was written.
The shm_mq mechanism was intended to optionally notice when the process
on the other end of the queue fails to attach to the queue. It does
this by allowing the user to pass a BackgroundWorkerHandle; if the
background worker in question is launched and dies without attaching
to the queue, then we know it never will. This logic works OK in
blocking mode, but when called with nowait = true we fail to notice
that this has happened due to an asymmetry in the logic. Repair.
Reported off-list by Rushabh Lathia. Patch by me.
Commit bda76c1c8c caused both plus and
minus infinity to be rendered as "infinity", which is not only wrong
but inconsistent with the pre-9.4 behavior of to_json(). Fix that by
duplicating the coding in date_out/timestamp_out/timestamptz_out more
closely. Per bug #13687 from Stepan Perlov. Back-patch to 9.4, like
the previous commit.
In passing, also re-pgindent json.c, since it had gotten a bit messed up by
recent patches (and I was already annoyed by indentation-related problems
in back-patching this fix ...)
Instead, use transaction abort. Given an unlucky bout of latency, the
timeout would cancel the RESET itself. Buildfarm members gharial,
lapwing, mereswine, shearwater, and sungazer witness that. Back-patch
to 9.1 (all supported versions). The query_canceled test still could
timeout before entering its subtransaction; for whatever reason, that
has yet to happen on the buildfarm.
pg_regprefix was doing nothing with lookahead constraints, which would
be fine if it were the right kind of nothing, but it isn't: we have to
terminate our search for a fixed prefix, not just pretend the LACON arc
isn't there. Otherwise, if the current state has both a LACON outarc and a
single plain-color outarc, we'd falsely conclude that the color represents
an addition to the fixed prefix, and generate an extracted index condition
that restricts the indexscan too much. (See added regression test case.)
Terminating the search is conservative: we could traverse the LACON arc
(thus assuming that the constraint can be satisfied at runtime) and then
examine the outarcs of the linked-to state. But that would be a lot more
work than it seems worth, because writing a LACON followed by a single
plain character is a pretty silly thing to do.
This makes a difference only in rather contrived cases, but it's a bug,
so back-patch to all supported branches.
Revert our previous addition of "all" flags to copyins() and copyouts();
they're no longer needed, and were never anything but an unsightly hack.
Improve a couple of infelicities in the REG_DEBUG code for dumping
the NFA data structure, including adding code to count the total
number of states and arcs.
Add a couple of missed error checks.
Add some more documentation in the README file, and some regression tests
illustrating cases that exceeded the state-count limit and/or took
unreasonable amounts of time before this set of patches.
Back-patch to all supported branches.
This code previously counted the number of NFA states it created, and
complained if a limit was exceeded, so as to prevent bizarre regex patterns
from consuming unreasonable time or memory. That's fine as far as it went,
but the code paid no attention to how many arcs linked those states. Since
regexes can be contrived that have O(N) states but will need O(N^2) arcs
after fixempties() processing, it was still possible to blow out memory,
and take a long time doing it too. To fix, modify the bookkeeping to count
space used by both states and arcs.
I did not bother with including the "color map" in the accounting; it
can only grow to a few megabytes, which is not a lot in comparison to
what we're allowing for states+arcs (about 150MB on 64-bit machines
or half that on 32-bit machines).
Looking at some of the larger real-world regexes captured in the Tcl
regression test suite suggests that the most that is likely to be needed
for regexes found in the wild is under 10MB, so I believe that the current
limit has enough headroom to make it okay to keep it as a hard-wired limit.
In connection with this, redefine REG_ETOOBIG as meaning "regular
expression is too complex"; the previous wording of "nfa has too many
states" was already somewhat inapropos because of the error code's use
for stack depth overrun, and it was not very user-friendly either.
Back-patch to all supported branches.
The previous coding would create a new intermediate state every time it
wanted to interchange the ordering of two constraint arcs. Certain regex
features such as \Y can generate large numbers of parallel constraint arcs,
and if we needed to reorder the results of that, we created unreasonable
numbers of intermediate states. To improve matters, keep a list of
already-created intermediate states associated with the state currently
being considered by the outer loop; we can re-use such states to place all
the new arcs leading to the same destination or source.
I also took the trouble to redefine push() and pull() to have a less risky
API: they no longer delete any state or arc that the caller might possibly
have a pointer to, except for the specifically-passed constraint arc.
This reduces the risk of re-introducing the same type of error seen in
the failed patch for CVE-2007-4772.
Back-patch to all supported branches.
The previous coding took something like O(N^4) time to fully process a
chain of N EMPTY arcs. We can't really do much better than O(N^2) because
we have to insert about that many arcs, but we can do lots better than
what's there now. The win comes partly from using mergeins() to amortize
de-duplication of arcs across multiple source states, and partly from
exploiting knowledge of the ordering of arcs for each state to avoid
looking at arcs we don't need to consider during the scan. We do have
to be a bit careful of the possible reordering of arcs introduced by
the sort-merge coding of the previous commit, but that's not hard to
deal with.
Back-patch to all supported branches.
Change the singly-linked in-arc and out-arc lists to be doubly-linked,
so that arc deletion is constant time rather than having worst-case time
proportional to the number of other arcs on the connected states.
Modify the bulk arc transfer operations copyins(), copyouts(), moveins(),
moveouts() so that they use a sort-and-merge algorithm whenever there's
more than a small number of arcs to be copied or moved. The previous
method is O(N^2) in the number of arcs involved, because it performs
duplicate checking independently for each copied arc. The new method may
change the ordering of existing arcs for the destination state, but nothing
really cares about that.
Provide another bulk arc copying method mergeins(), which is unused as
of this commit but is needed for the next one. It basically is like
copyins(), but the source arcs might not all come from the same state.
Replace the O(N^2) bubble-sort algorithm used in carcsort() with a qsort()
call.
These changes greatly improve the performance of regex compilation for
large or complex regexes, at the cost of extra space for arc storage during
compilation. The original tradeoff was probably fine when it was made, but
now we care more about speed and less about memory consumption.
Back-patch to all supported branches.
It's possible to construct regular expressions that contain loops of
constraint arcs (that is, ^ $ AHEAD BEHIND or LACON arcs). There's no use
in fully traversing such a loop at execution, since you'd just end up in
the same NFA state without having consumed any input. Worse, such a loop
leads to infinite looping in the pullback/pushfwd stage of compilation,
because we keep pushing or pulling the same constraints around the loop
in a vain attempt to move them to the pre or post state. Such looping was
previously recognized in CVE-2007-4772; but the fix only handled the case
of trivial single-state loops (that is, a constraint arc leading back to
its source state) ... and not only that, it was incorrect even for that
case, because it broke the admittedly-not-very-clearly-stated API contract
of the pull() and push() subroutines. The first two regression test cases
added by this commit exhibit patterns that result in assertion failures
because of that (though there seem to be no ill effects in non-assert
builds). The other new test cases exhibit multi-state constraint loops;
in an unpatched build they will run until the NFA state-count limit is
exceeded.
To fix, remove the code added for CVE-2007-4772, and instead create a
general-purpose constraint-loop-breaking phase of regex compilation that
executes before we do pullback/pushfwd. Since we never need to traverse
a constraint loop fully, we can just break the loop at any chosen spot,
if we add clone states that can replicate any sequence of arc transitions
that would've traversed just part of the loop.
Also add some commentary clarifying why we have to have all these
machinations in the first place.
This class of problems has been known for some time --- we had a report
from Marc Mamin about two years ago, for example, and there are related
complaints in the Tcl bug tracker. I had discussed a fix of this kind
off-list with Henry Spencer, but didn't get around to doing something
about it until the issue was rediscovered by Greg Stark recently.
Back-patch to all supported branches.
Postmaster child processes that aren't supposed to be attached to shared
memory were not bothering to close the shared memory mapping handle they
inherit from the postmaster process. That's mostly harmless, since the
handle vanishes anyway when the child process exits -- but the syslogger
process, if used, doesn't get killed and restarted during recovery from a
backend crash. That meant that Windows doesn't see the shared memory
mapping as becoming free, so it doesn't delete it and the postmaster is
unable to create a new one, resulting in failure to recover from crashes
whenever logging_collector is turned on.
Per report from Dmitry Vasilyev. It's a bit astonishing that we'd not
figured this out long ago, since it's been broken from the very beginnings
of out native Windows support; probably some previously-unexplained trouble
reports trace to this.
A secondary problem is that on Cygwin (perhaps only in older versions?),
exec() may not detach from the shared memory segment after all, in which
case these child processes did remain attached to shared memory, posing
the risk of an unexpected shared memory clobber if they went off the rails
somehow. That may be a long-gone bug, but we can deal with it now if it's
still live, by detaching within the infrastructure introduced here to deal
with closing the handle.
Back-patch to all supported branches.
Tom Lane and Amit Kapila
Back-port of a part of commit 690ed2b76a that
I'd depended on without realizing that it was only added recently. Since
it seems entirely likely that other such tests will need to be back-patched
in future, providing the flag seems like a better answer than just putting
a test in-line.
Per buildfarm.
pg_ctl start with -w previously relied on a heuristic that the postmaster
would surely always manage to create postmaster.pid within five seconds.
Unfortunately, that fails much more often than we would like on some of the
slower, more heavily loaded buildfarm members.
We have known for quite some time that we could remove the need for that
heuristic on Unix by using fork/exec instead of system() to launch the
postmaster. This allows us to know the exact PID of the postmaster, which
allows near-certain verification that the postmaster.pid file is the one
we want and not a leftover, and it also lets us use waitpid() to detect
reliably whether the child postmaster has exited or not.
What was blocking this change was not wanting to rewrite the Windows
version of start_postmaster() to avoid use of CMD.EXE. That's doable
in theory but would require fooling about with stdout/stderr redirection,
and getting the handling of quote-containing postmaster switches to
stay the same might be rather ticklish. However, we realized that
we don't have to do that to fix the problem, because we can test
whether the shell process has exited as a proxy for whether the
postmaster is still alive. That doesn't allow an exact check of the
PID in postmaster.pid, but we're no worse off than before in that
respect; and we do get to get rid of the heuristic about how long the
postmaster might take to create postmaster.pid.
On Unix, this change means that a second "pg_ctl start -w" immediately
after another such command will now reliably fail, whereas previously
it would succeed if done within two seconds of the earlier command.
Since that's a saner behavior anyway, it's fine. On Windows, the case can
still succeed within the same time window, since pg_ctl can't tell that the
earlier postmaster's postmaster.pid isn't the pidfile it is looking for.
To ensure stable test results on Windows, we can insert a short sleep into
the test script for pg_ctl, ensuring that the existing pidfile looks stale.
This hack can be removed if we ever do rewrite start_postmaster(), but that
no longer seems like a high-priority thing to do.
Back-patch to all supported versions, both because the current behavior
is buggy and because we must do that if we want the buildfarm failures
to go away.
Tom Lane and Michael Paquier
Many functions stored JsonbIteratorToken values in variables of other
integer types. Also, standardize order relative to other declarations.
Expect compilers to generate the same code before and after this change.
For some reason, neither of the compilers I usually use noticed the
uninitialized-variable problem I introduced in commit 7e2a18a916.
That's hardly a good enough excuse though. Committing with brown paper bag
on head.
In addition to putting the operations in the right order, move the
declaration of "now" inside the loop; there's no need for it to be
outside, and that does wake up older gcc enough to notice any similar
future problem.
Back-patch to 9.4; earlier versions lack the time-to-SIGKILL stanza
so there's no bug.
This lets us remove the large alternative results files for the main
json and jsonb tests, which makes modifying those tests simpler for
committers and patch submitters.
Backpatch to 9.4 for jsonb and 9.3 for json.
The postmaster now checks every minute or so (worst case, at most two
minutes) that postmaster.pid is still there and still contains its own PID.
If not, it performs an immediate shutdown, as though it had received
SIGQUIT.
The original goal behind this change was to ensure that failed buildfarm
runs would get fully cleaned up, even if the test scripts had left a
postmaster running, which is not an infrequent occurrence. When the
buildfarm script removes a test postmaster's $PGDATA directory, its next
check on postmaster.pid will fail and cause it to exit. Previously, manual
intervention was often needed to get rid of such orphaned postmasters,
since they'd block new test postmasters from obtaining the expected socket
address.
However, by checking postmaster.pid and not something else, we can provide
additional robustness: manual removal of postmaster.pid is a frequent DBA
mistake, and now we can at least limit the damage that will ensue if a new
postmaster is started while the old one is still alive.
Back-patch to all supported branches, since we won't get the desired
improvement in buildfarm reliability otherwise.
Some of the buildfarm members are evidently miserly enough of stack space
to pass the originally-committed form of this test. Increase the
requirement 10X to hopefully ensure that it fails as-expected everywhere.
Security: CVE-2015-5289
The tsquery, ltxtquery and query_int data types have a common ancestor.
Having acquired check_stack_depth() calls independently, each was
missing at least one call. Back-patch to 9.0 (all supported versions).
A range type can name another range type as its subtype, and a record
type can bear a column of another record type. Consequently, functions
like range_cmp() and record_recv() are recursive. Functions at risk
include operator family members and referents of pg_type regproc
columns. Treat as recursive any such function that looks up and calls
the same-purpose function for a record column type or the range subtype.
Back-patch to 9.0 (all supported versions).
An array type's element type is never itself an array type, so array
functions are unaffected. Recursion depth proportional to array
dimensionality, found in array_dim_to_jsonb(), is fine thanks to MAXDIM.
Sufficiently-deep recursion heretofore elicited a SIGSEGV. If an
application constructs PostgreSQL json or jsonb values from arbitrary
user input, application users could have exploited this to terminate all
active database connections. That applies to 9.3, where the json parser
adopted recursive descent, and later versions. Only row_to_json() and
array_to_json() were at risk in 9.2, both in a non-security capacity.
Back-patch to 9.2, where the json type was introduced.
Oskari Saarenmaa, reviewed by Michael Paquier.
Security: CVE-2015-5289
In 020235a575 I lowered the autovacuum_*freeze_max_age minimums to
allow for easier testing of wraparounds. I did not touch the
corresponding per-table limits. While those don't matter for the purpose
of wraparound, it seems more consistent to lower them as well.
It's noteworthy that the previous reloption lower limit for
autovacuum_multixact_freeze_max_age was too high by one magnitude, even
before 020235a575.
Discussion: 26377.1443105453@sss.pgh.pa.us
Backpatch: back to 9.0 (in parts), like the prior patch
On reflection, the submitted patch didn't really work to prevent the
request size from exceeding MaxAllocSize, because of the fact that we'd
happily round nbuckets up to the next power of 2 after we'd limited it to
max_pointers. The simplest way to enforce the limit correctly is to
round max_pointers down to a power of 2 when it isn't one already.
(Note that the constraint to INT_MAX / 2, if it were doing anything useful
at all, is properly applied after that.)
Limit the size of the hashtable pointer array to not more than
MaxAllocSize. We've seen reports of failures due to this in HEAD/9.5,
and it seems possible in older branches as well. The change in
NTUP_PER_BUCKET in 9.5 may have made the problem more likely, but
surely it didn't introduce it.
Tomas Vondra, slightly modified by me
The existing hint talked about "may only contain letters", but the
actual requirement is more strict: only lower case letters are allowed.
Reported-By: Rushabh Lathia
Author: Rushabh Lathia
Discussion: AGPqQf2x50qcwbYOBKzb4x75sO_V3g81ZsA8+Ji9iN5t_khFhQ@mail.gmail.com
Backpatch: 9.4-, where replication slots were added
DST law changes in Cayman Islands, Fiji, Moldova, Morocco, Norfolk Island,
North Korea, Turkey, Uruguay. New zone America/Fort_Nelson for Canadian
Northern Rockies.
Some of the functions in regex compilation and execution recurse, and
therefore could in principle be driven to stack overflow. The Tcl crew
has seen this happen in practice in duptraverse(), though their fix was
to put in a hard-wired limit on the number of recursive levels, which is
not too appetizing --- fortunately, we have enough infrastructure to check
the actually available stack. Greg Stark has also seen it in other places
while fuzz testing on a machine with limited stack space. Let's put guards
in to prevent crashes in all these places.
Since the regex code would leak memory if we simply threw elog(ERROR),
we have to introduce an API that checks for stack depth without throwing
such an error. Fortunately that's not difficult.
In cfindloop(), if the initial call to shortest() reports that a
zero-length match is possible at the current search start point, but then
it is unable to construct any actual match to that, it'll just loop around
with the same start point, and thus make no progress. We need to force the
start point to be advanced. This is safe because the loop over "begin"
points has already tried and failed to match starting at "close", so there
is surely no need to try that again.
This bug was introduced in commit e2bd904955,
wherein we allowed continued searching after we'd run out of match
possibilities, but evidently failed to think hard enough about exactly
where we needed to search next.
Because of the way this code works, such a match failure is only possible
in the presence of backrefs --- otherwise, shortest()'s judgment that a
match is possible should always be correct. That probably explains how
come the bug has escaped detection for several years.
The actual fix is a one-liner, but I took the trouble to add/improve some
comments related to the loop logic.
After fixing that, the submitted test case "()*\1" didn't loop anymore.
But it reported failure, though it seems like it ought to match a
zero-length string; both Tcl and Perl think it does. That seems to be from
overenthusiastic optimization on my part when I rewrote the iteration match
logic in commit 173e29aa5d: we can't just
"declare victory" for a zero-length match without bothering to set match
data for capturing parens inside the iterator node.
Per fuzz testing by Greg Stark. The first part of this is a bug in all
supported branches, and the second part is a bug since 9.2 where the
iteration rewrite happened.
Commit 9662143f0c added infrastructure to
allow regular-expression operations to be terminated early in the event
of SIGINT etc. However, fuzz testing by Greg Stark disclosed that there
are still cases where regex compilation could run for a long time without
noticing a cancel request. Specifically, the fixempties() phase never
adds new states, only new arcs, so it doesn't hit the cancel check I'd put
in newstate(). Add one to newarc() as well to cover that.
Some experimentation of my own found that regex execution could also run
for a long time despite a pending cancel. We'd put a high-level cancel
check into cdissect(), but there was none inside the core text-matching
routines longest() and shortest(). Ordinarily those inner loops are very
very fast ... but in the presence of lookahead constraints, not so much.
As a compromise, stick a cancel check into the stateset cache-miss
function, which is enough to guarantee a cancel check at least once per
lookahead constraint test.
Making this work required more attention to error handling throughout the
regex executor. Henry Spencer had apparently originally intended longest()
and shortest() to be incapable of incurring errors while running, so
neither they nor their subroutines had well-defined error reporting
behaviors. However, that was already broken by the lookahead constraint
feature, since lacon() can surely suffer an out-of-memory failure ---
which, in the code as it stood, might never be reported to the user at all,
but just silently be treated as a non-match of the lookahead constraint.
Normalize all that by inserting explicit error tests as needed. I took the
opportunity to add some more comments to the code, too.
Back-patch to all supported branches, like the previous patch.
This case seems to have been overlooked when unvalidated check constraints
were introduced, in 9.2. The code would attempt to dump such constraints
over again for each child table, even though adding them to the parent
table is sufficient.
In 9.2 and 9.3, also fix contrib/pg_upgrade/Makefile so that the "make
clean" target fully cleans up after a failed test. This evidently got
dealt with at some point in 9.4, but it wasn't back-patched. I ran into
it while testing this fix ...
Per bug #13656 from Ingmar Brouns.
If some existing listener is far behind, incoming new listener sessions
would start from that session's read pointer and then need to advance over
many already-committed notification messages, which they have no interest
in. This was expensive in itself and also thrashed the pg_notify SLRU
buffers a lot more than necessary. We can improve matters considerably
in typical scenarios, without much added cost, by starting from the
furthest-ahead read pointer, not the furthest-behind one. We do have to
consider only sessions in our own database when doing this, which requires
an extra field in the data structure, but that's a pretty small cost.
Back-patch to 9.0 where the current LISTEN/NOTIFY logic was introduced.
Matt Newell, slightly adjusted by me
We were passing error message texts to croak() verbatim, which turns out
not to work if the text contains non-ASCII characters; Perl mangles their
encoding, as reported in bug #13638 from Michal Leinweber. To fix, convert
the text into a UTF8-encoded SV first.
It's hard to test this without risking failures in different database
encodings; but we can follow the lead of plpython, which is already
assuming that no-break space (U+00A0) has an equivalent in all encodings
we care about running the regression tests in (cf commit 2dfa15de5).
Back-patch to 9.1. The code is quite different in 9.0, and anyway it seems
too risky to put something like this into 9.0's final minor release.
Alex Hunsaker, with suggestions from Tim Bunce and Tom Lane
This replaces ill-fated commit 5ddc72887a,
which was reverted because it broke active uses of FK cache entries. In
this patch, we still do nothing more to invalidatable cache entries than
mark them as needing revalidation, so we won't break active uses. To keep
down the overhead of InvalidateConstraintCacheCallBack(), keep a list of
just the currently-valid cache entries. (The entries are large enough that
some added space for list links doesn't seem like a big problem.) This
would still be O(N^2) when there are many valid entries, though, so when
the list gets too long, just force the "sinval reset" behavior to remove
everything from the list. I set the threshold at 1000 entries, somewhat
arbitrarily. Possibly that could be fine-tuned later. Another item for
future study is whether it's worth adding reference counting so that we
could safely remove invalidated entries. As-is, problem cases are likely
to end up with large and mostly invalid FK caches.
Like the previous attempt, backpatch to 9.3.
Jan Wieck and Tom Lane
(Third time's the charm, I hope.)
Additional testing disclosed that this code could mangle already-localized
output from the "money" datatype. We can't very easily skip applying it
to "money" values, because the logic is tied to column right-justification
and people expect "money" output to be right-justified. Short of
decoupling that, we can fix it in what should be a safe enough way by
testing to make sure the string doesn't contain any characters that would
not be expected in plain numeric output.
On closer inspection, those seemingly redundant atoi() calls were not so
much inefficient as just plain wrong: the author of this code either had
not read, or had not understood, the POSIX specification for localeconv().
The grouping field is *not* a textual digit string but separate integers
encoded as chars.
We'll follow the existing code as well as the backend's cash.c in only
honoring the first group width, but let's at least honor it correctly.
This doesn't actually result in any behavioral change in any of the
locales I have installed on my Linux box, which may explain why nobody's
complained; grouping width 3 is close enough to universal that it's barely
worth considering other cases. Still, wrong is wrong, so back-patch.
This code did the wrong thing entirely for numbers with an exponent
but no decimal point (e.g., '1e6'), as reported by Jeff Janes in
bug #13636. More generally, it made lots of unverified assumptions
about what the input string could possibly look like. Rearrange so
that it only fools with leading digits that it's directly verified
are there, and an immediately adjacent decimal point. While at it,
get rid of some useless inefficiencies, like converting the grouping
count string to integer over and over (and over).
This has been broken for a long time, so back-patch to all supported
branches.
The old minimum values are rather large, making it time consuming to
test related behaviour. Additionally the current limits, especially for
multixacts, can be problematic in space-constrained systems. 10000000
multixacts can contain a lot of members.
Since there's no good reason for the current limits, lower them a good
bit. Setting them to 0 would be a bad idea, triggering endless vacuums,
so still retain a limit.
While at it fix autovacuum_multixact_freeze_max_age to refer to
multixact.c instead of varsup.c.
Reviewed-By: Robert Haas
Discussion: CA+TgmoYmQPHcrc3GSs7vwvrbTkbcGD9Gik=OztbDGGrovkkEzQ@mail.gmail.com
Backpatch: back to 9.0 (in parts)
mul_var() postpones propagating carries until it risks overflow in its
internal digit array. However, the logic failed to account for the
possibility of overflow in the carry propagation step, allowing wrong
results to be generated in corner cases. We must slightly reduce the
when-to-propagate-carries threshold to avoid that.
Discovered and fixed by Dean Rasheed, with small adjustments by me.
This has been wrong since commit d72f6c7503,
so back-patch to all supported branches.
RemoveLocalLock() must consider the possibility that LockAcquireExtended()
failed to palloc the initial space for a locallock's lockOwners array.
I had evidently meant to cope with this hazard when the code was originally
written (commit 1785acebf2), but missed that
the pfree needed to be protected with an if-test. Just to make sure things
are left in a clean state, reset numLockOwners as well.
Per low-memory testing by Andreas Seltenreich. Back-patch to all supported
branches.
After an internal failure in shortest() or longest() while pinning down the
exact location of a match, find() forgot to free the DFA structure before
returning. This is pretty unlikely to occur, since we just successfully
ran the "search" variant of the DFA; but it could happen, and it would
result in a session-lifespan memory leak since this code uses malloc()
directly. Problem seems to have been aboriginal in Spencer's library,
so back-patch all the way.
In passing, correct a thinko in a comment I added awhile back about the
meaning of the "ntree" field.
I happened across these issues while comparing our code to Tcl's version
of the library.
Commit 5ddc72887a does not actually work
because it will happily blow away ri_constraint_cache entries that are
in active use in outer call levels. In any case, it's a very ugly,
brute-force solution to the problem of limiting the cache size.
Revert until it can be redesigned.
Modify pg_dump to restore postgres/template1 databases to non-default
tablespaces by switching out of the database to be moved, then switching
back.
Also, to fix potentially cases where the old/new tablespaces might not
match, fix pg_upgrade to process new/old tablespaces separately in all
cases.
Report by Marti Raudsepp
Patch by Marti Raudsepp, me
Backpatch through 9.0
Commit 45ba424f improved foreign key lookups during bulk updates
when the FK value does not change. When restoring a schema dump
from a database with many (say 100,000) foreign keys, this cache
would grow very big and every ALTER TABLE command was causing an
InvalidateConstraintCacheCallBack(), which uses a sequential hash
table scan. This could cause a severe performance regression in
restoring a schema dump (including during pg_upgrade).
The patch uses a heuristic method of detecting when the hash table
should be destroyed and recreated.
InvalidateConstraintCacheCallBack() adds the current size of the
hash table to a counter. When that sum reaches 1,000,000, the hash
table is flushed. This fixes the regression without noticeable
harm to the bulk update use case.
Jan Wieck
Backpatch to 9.3 where the performance regression was introduced.
The "typo" alleged in commit 1e460d4bd was actually a comment that was
correct when written, but I missed updating it in commit b5282aa89.
Use a slightly less specific (and hopefully more future-proof) description
of what is collected. Back-patch to 9.2 where that commit appeared, and
revert the comment to its then-entirely-correct state before that.
This reverts ed47666, which ended up adding a second tempoary
installation for all 'make check' runs, and reverts the part of
ef57b98 that changed the TAP 'prove_check' section, which appears to
have been unintentional to begin with on this branch.
Analysis and patch by Noah.
The list-wrangling here was done wrong, allowing the same state to get
put into the list twice. The following loop then would clone it twice.
The second clone would wind up with no inarcs, so that there was no
observable misbehavior AFAICT, but a useless state in the finished NFA
isn't an especially good thing.
This commit makes postmaster forcibly remove the files signaling
a standby promotion request. Otherwise, the existence of those files
can trigger a promotion too early, whether a user wants that or not.
This removal of files is usually unnecessary because they can exist
only during a few moments during a standby promotion. However
there is a race condition: if pg_ctl promote is executed and creates
the files during a promotion, the files can stay around even after
the server is brought up to new master. Then, if new standby starts
by using the backup taken from that master, the files can exist
at the server startup and should be removed in order to avoid
an unexpected promotion.
Back-patch to 9.1 where promote signal file was introduced.
Problem reported by Feike Steenbergen.
Original patch by Michael Paquier, modified by me.
Discussion: 20150528100705.4686.91426@wrigleys.postgresql.org
Commit fa4a4df93c attempted to backpatch
to 9.4 a change to improve the logging of TAP tests. Unfortunately, due
to how 9.4 and 9.5 had diverged, the backpatch to 9.4 depended on a few
things which didn't exist in 9.4 (but did in 9.5), specifically, the
'temp-check' production and the 'with_temp_install' definition (which
also required 'abs_top_builddir').
Add these definitions into REL9_4_STABLE to allow the TAP tests to run
correctly under 'make check'.
Even views considered "simple" enough to be automatically updatable may
have mulitple relations involved (eg: in a where clause). We need to
make sure and lock those relations when rewriting the query.
Back-patch to 9.3 where updatable views were added.
Pointed out by Andres, patch thanks to Dean Rasheed.
This was forgotten in 8a3631f (commit that originally added the parameter)
and 0ca9907 (commit that added the documentation later that year).
Back-patch to all supported versions.
Cleanup process could be called by ordinary insert/update and could take a lot
of time. Add vacuum_delay_point() to make this process interruptable. Under
vacuum this call will also throttle a vacuum process to decrease system load,
called from insert/update it will not throttle, and that reduces a latency.
Backpatch for all supported branches.
Jeff Janes <jeff.janes@gmail.com>
RESERV. RESERV is meant for tokens like "now" and having them in that
category throws errors like these when used as an input date:
stark=# SELECT 'doy'::timestamptz;
ERROR: unexpected dtype 33 while parsing timestamptz "doy"
LINE 1: SELECT 'doy'::timestamptz;
^
stark=# SELECT 'dow'::timestamptz;
ERROR: unexpected dtype 32 while parsing timestamptz "dow"
LINE 1: SELECT 'dow'::timestamptz;
^
Found by LLVM's Libfuzzer
This has been broken since 9.3 (commit 82b1b213ca to be exact),
which suggests that nobody is any longer using a Windows build system that
doesn't provide a symlink emulation. Still, it's wrong on its own terms,
so repair.
YUriy Zhuravlev
Formerly, we treated only portals created in the current subtransaction as
having failed during subtransaction abort. However, if the error occurred
while running a portal created in an outer subtransaction (ie, a cursor
declared before the last savepoint), that has to be considered broken too.
To allow reliable detection of which ones those are, add a bookkeeping
field to struct Portal that tracks the innermost subtransaction in which
each portal has actually been executed. (Without this, we'd end up
failing portals containing functions that had called the subtransaction,
thereby breaking plpgsql exception blocks completely.)
In addition, when we fail an outer-subtransaction Portal, transfer its
resources into the subtransaction's resource owner, so that they're
released early in cleanup of the subxact. This fixes a problem reported by
Jim Nasby in which a function executed in an outer-subtransaction cursor
could cause an Assert failure or crash by referencing a relation created
within the inner subtransaction.
The proximate cause of the Assert failure is that AtEOSubXact_RelationCache
assumed it could blow away a relcache entry without first checking that the
entry had zero refcount. That was a bad idea on its own terms, so add such
a check there, and to the similar coding in AtEOXact_RelationCache. This
provides an independent safety measure in case there are still ways to
provoke the situation despite the Portal-level changes.
This has been broken since subtransactions were invented, so back-patch
to all supported branches.
Tom Lane and Michael Paquier
The setting values of some parameters including max_worker_processes
must be equal to or higher than the values on the master. However,
previously max_worker_processes was not listed as such parameter
in the document. So this commit adds it to that list.
Back-patch to 9.4 where max_worker_processes was added.
It's only necessary to fix this in 9.4; later versions don't have this
code (because we ripped out Alpha support entirely), while earlier ones
aren't actually using pg_read_barrier() anywhere.
Per rather belated report from Christoph Berg.
On recent AIX it's necessary to configure gcc to use the native assembler
(because the GNU assembler hasn't been updated to handle AIX 6+). This
caused PG builds to fail with assembler syntax errors, because we'd try
to compile s_lock.h's gcc asm fragment for PPC, and that assembly code
relied on GNU-style local labels. We can't substitute normal labels
because it would fail in any file containing more than one inlined use of
tas(). Fortunately, that code is stable enough, and the PPC ISA is simple
enough, that it doesn't seem like too much of a maintenance burden to just
hand-code the branch offsets, removing the need for any labels.
Note that the AIX assembler only accepts "$" for the location counter
pseudo-symbol. The usual GNU convention is "."; but it appears that all
versions of gas for PPC also accept "$", so in theory this patch will not
break any other PPC platforms.
This has been reported by a few people, but Steve Underwood gets the credit
for being the first to pursue the problem far enough to understand why it
was failing. Thanks also to Noah Misch for additional testing.
For no obvious reason, spi_printtup() was coded to enlarge the tuple
pointer table by just 256 slots at a time, rather than doubling the size at
each reallocation, as is our usual habit. For very large SPI results, this
makes for O(N^2) time spent in repalloc(), which of course soon comes to
dominate the runtime. Use the standard doubling approach instead.
This is a longstanding performance bug, so back-patch to all active
branches.
Neil Conway
PLyString_ToComposite() blithely overwrote proc->result.out.d, even though
for a composite result type the other union variant proc->result.out.r is
the one that should be valid. This could result in a crash if out.r had
in fact been filled in (proc->result.is_rowtype == 1) and then somebody
later attempted to use that data; as per bug #13579 from Paweł Michalak.
Just to add insult to injury, it didn't work for RECORD results anyway,
because record_in() would refuse the case.
Fix by doing the I/O function lookup in a local PLyTypeInfo variable,
as we were doing already in PLyObject_ToComposite(). This is not a great
technique because any fn_extra data allocated by the input function will
be leaked permanently (thanks to using TopMemoryContext as fn_mcxt).
But that's a pre-existing issue that is much less serious than a crash,
so leave it to be fixed separately.
This bug would be a potential security issue, except that plpython is
only available to superusers and the crash requires coding the function
in a way that didn't work before today's patches.
Add regression test cases covering all the supported methods of converting
composite results.
Back-patch to 9.1 where the faulty coding was introduced.
If we have the typmod that identifies a registered record type, there's no
reason that record_in() should refuse to perform input conversion for it.
Now, in direct SQL usage, record_in() will always be passed typmod = -1
with type OID RECORDOID, because no typmodin exists for type RECORD, so the
case can't arise. However, some InputFunctionCall users such as PLs may be
able to supply the right typmod, so we should allow this to support them.
Note: the previous coding and comment here predate commit 59c016aa9f.
There has been no case since 8.1 in which the passed type OID wouldn't be
valid; and if it weren't, this error message wouldn't be apropos anyway.
Better to let lookup_rowtype_tupdesc complain about it.
Back-patch to 9.1, as this is necessary for my upcoming plpython fix.
I'm committing it separately just to make it a bit more visible in the
commit history.
plpgsql's error location context messages ("PL/pgSQL function fn-name line
line-no at stmt-type") would misreport a CONTINUE statement as being an
EXIT, and misreport a MOVE statement as being a FETCH. These are clear
bugs that have been there a long time, so back-patch to all supported
branches.
In addition, in 9.5 and HEAD, change the description of EXECUTE from
"EXECUTE statement" to just plain EXECUTE; there seems no good reason why
this statement type should be described differently from others that have
a well-defined head keyword. And distinguish GET STACKED DIAGNOSTICS from
plain GET DIAGNOSTICS. These are a bit more of a judgment call, and also
affect existing regression-test outputs, so I did not back-patch into
stable branches.
Pavel Stehule and Tom Lane
Doing so doesn't work if bool is a macro rather than a typedef.
Although c.h spends some effort to support configurations where bool is
a preexisting macro, help_config.c has existed this way since
2003 (b700a6), and there have not been any reports of
problems. Backpatch anyway since this is as riskless as it gets.
Discussion: 20150812084351.GD8470@awork2.anarazel.de
Backpatch: 9.0-master
Mistakenly relreplident was stored as a bool. That works today as c.h
typedefs bool to a char, but isn't very future proof.
Discussion: 20150812084351.GD8470@awork2.anarazel.de
Backpatch: 9.4 where replica identity was introduced.
This fixes presentation of non-ASCII messages to the Windows event log
and console in rare cases involving Korean locale. Processes like the
postmaster and checkpointer, but not processes attached to databases,
were affected. Back-patch to 9.4, where MessageEncoding was introduced.
The problem exists in all supported versions, but this change has no
effect in the absence of the code recognizing PG_UHC MessageEncoding.
Noticed while investigating bug #13427 from Dmitri Bourlatchkov.
Commit 49c817eab7 replaced with a hard
error the dubious pg_do_encoding_conversion() behavior when outside a
transaction. Reintroduce the historic soft failure locally within
pgwin32_message_to_UTF16(). This fixes errors when writing messages in
less-common encodings to the Windows event log or console. Back-patch
to 9.4, where the aforementioned commit first appeared.
Per bug #13427 from Dmitri Bourlatchkov.
In commit 95f4e59c32 I added a regression test case that examined
the plan of a query on system catalogs. That isn't a terribly great idea
because the catalogs tend to change from version to version, or even
within a version if someone makes an unrelated regression-test change that
populates the catalogs a bit differently. Usually I try to make planner
test cases rely on test tables that have not changed since Berkeley days,
but I got sloppy in this case because the submitted crasher example queried
the catalogs and I didn't spend enough time on rewriting it. But it was a
problem waiting to happen, as I was rudely reminded when I tried to port
that patch into Salesforce's Postgres variant :-(. So spend a little more
effort and rewrite the query to not use any system catalogs. I verified
that this version still provokes the Assert if 95f4e59c32866716's code fix
is reverted.
I also removed the EXPLAIN output from the test, as it turns out that the
assertion occurs while considering a plan that isn't the one ultimately
selected anyway; so there's no value in risking any cross-platform
variation in that printout.
Back-patch to 9.2, like the previous patch.
One of the changes I made in commit 8703059c6b turns out not to have
been such a good idea: we still need the exception in join_is_legal() that
allows a join if both inputs already overlap the RHS of the special join
we're checking. Otherwise we can miss valid plans, and might indeed fail
to find a plan at all, as in recent report from Andreas Seltenreich.
That code was added way back in commit c17117649b, but I failed to
include a regression test case then; my bad. Put it back with a better
explanation, and a test this time. The logic does end up a bit different
than before though: I now believe it's appropriate to make this check
first, thereby allowing such a case whether or not we'd consider the
previous SJ(s) to commute with this one. (Presumably, we already decided
they did; but it was confusing to have this consideration in the middle
of the code that was handling the other case.)
Back-patch to all active branches, like the previous patch.
actually check the returned pointer allocated, potentially NULL which
could be the result of a malloc call.
Issue noted by Coverity, fixed by Michael Paquier <michael@otacoo.com>
newnfa() failed to set the regex error state when malloc() fails.
Several places in regcomp.c failed to check for an error after calling
subre(). Each of these mistakes could lead to null-pointer-dereference
crashes in memory-starved backends.
Report and patch by Andreas Seltenreich. Back-patch to all branches.
pg_dump produced fairly silly GRANT/REVOKE commands when dumping types from
pre-9.2 servers, and when dumping functions or procedural languages from
pre-7.3 servers. Those server versions lack the typacl, proacl, and/or
lanacl columns respectively, and pg_dump substituted default values that
were in fact incorrect. We ended up revoking all the owner's own
privileges for the object while granting all privileges to PUBLIC.
Of course the owner would then have those privileges again via PUBLIC, so
long as she did not try to revoke PUBLIC's privileges; which may explain
the lack of field reports. Nonetheless this is pretty silly behavior.
The stakes were raised by my recent patch to make pg_dump dump shell types,
because 9.2 and up pg_dump would proceed to emit bogus GRANT/REVOKE
commands for a shell type if dumping from a pre-9.2 server; and the server
will not accept GRANT/REVOKE commands for a shell type. (Perhaps it
should, but that's a topic for another day.) So the resulting dump script
wouldn't load without errors.
The right thing to do is to act as though these objects have default
privileges (null ACL entries), which causes pg_dump to print no
GRANT/REVOKE commands at all for them. That fixes the silly results
and also dodges the problem with shell types.
In passing, modify getProcLangs() to be less creatively different about
how to handle missing columns when dumping from older server versions.
Every other data-acquisition function in pg_dump does that by substituting
appropriate default values in the version-specific SQL commands, and I see
no reason why this one should march to its own drummer. Its use of
"SELECT *" was likewise not conformant with anyplace else, not to mention
it's not considered good SQL style for production queries.
Back-patch to all supported versions. Although 9.0 and 9.1 pg_dump don't
have the issue with typacl, they are more likely than newer versions to be
used to dump from ancient servers, so we ought to fix the proacl/lanacl
issues all the way back.
Commit 85e5e222b1 turns out not to have taken
care of all cases of the partially-evaluatable-PlaceHolderVar problem found
by Andreas Seltenreich's fuzz testing. I had set it up to check for risky
PHVs only in the event that we were making a star-schema-based exception to
the param_source_rels join ordering heuristic. However, it turns out that
the problem can occur even in joins that satisfy the param_source_rels
heuristic, in which case allow_star_schema_join() isn't consulted.
Refactor so that we check for risky PHVs whenever the proposed join has
any remaining parameterization.
Back-patch to 9.2, like the previous patch (except for the regression test
case, which only works back to 9.3 because it uses LATERAL).
Note that this discovery implies that problems of this sort could've
occurred in 9.2 and up even before the star-schema patch; though I've not
tried to prove that experimentally.
XLogRecPtr was compared with InvalidTransactionId instead of
InvalidXLogRecPtr. As both are defined to the same value this doesn't
cause any actual problems, but it's still wrong.
Backpatch: 9.4-master, bug was introduced in 9.4
A new test case from Andreas Seltenreich showed that we were still a bit
confused about removing PlaceHolderVars during join removal. Specifically,
remove_rel_from_query would remove a PHV that was used only underneath
the removable join, even if the place where it's used was the join partner
relation and not the join clause being deleted. This would lead to a
"too late to create a new PlaceHolderInfo" error later on. We can defend
against that by checking ph_eval_at to see if the PHV could possibly be
getting used at some partner rel.
Also improve some nearby LATERAL-related logic. I decided that the check
on ph_lateral needed to take precedence over the check on ph_needed, in
case there's a lateral reference underneath the join being considered.
(That may be impossible, but I'm not convinced of it, and it's easy enough
to defend against the case.) Also, I realized that remove_rel_from_query's
logic for updating LateralJoinInfos is dead code, because we don't build
those at all until after join removal.
Back-patch to 9.3. Previous versions didn't have the LATERAL issues, of
course, and they also didn't attempt to remove PlaceHolderInfos during join
removal. (I'm starting to wonder if changing that was really such a great
idea.)
Commit 9e7e29c75a introduced an Assert that
join removal didn't reduce the eval_at set of any PlaceHolderVar to empty.
At first glance it looks like join_is_removable ensures that's true --- but
actually, the loop in join_is_removable skips PlaceHolderVars that are not
referenced above the join due to be removed. So, if we don't want any
empty eval_at sets, the right thing to do is to delete any now-unreferenced
PlaceHolderVars from the data structure entirely.
Per fuzz testing by Andreas Seltenreich. Back-patch to 9.3 where the
aforesaid Assert was added.
Formerly, this function would always return "true" for an appendrel child
relation, because it would think that the appendrel parent was a potential
join target for the child. In principle that should only lead to some
inefficiency in planning, but fuzz testing by Andreas Seltenreich disclosed
that it could lead to "could not find pathkey item to sort" planner errors
in odd corner cases. Specifically, we would think that all columns of a
child table's multicolumn index were interesting pathkeys, causing us to
generate a MergeAppend path that sorts by all the columns. However, if any
of those columns weren't actually used above the level of the appendrel,
they would not get added to that rel's targetlist, which would result in
being unable to resolve the MergeAppend's sort keys against its targetlist
during createplan.c.
Backpatch to 9.3. In older versions, columns of an appendrel get added
to its targetlist even if they're not mentioned above the scan level,
so that the failure doesn't occur. It might be worth back-patching this
fix to older versions anyway, but I'll refrain for the moment.
Further testing revealed that commit f69b4b9495 was still a few
bricks shy of a load: minor tweaking of the previous test cases resulted
in the same wrong-outer-join-order problem coming back. After study
I concluded that my previous changes in make_outerjoininfo() were just
accidentally masking the problem, and should be reverted in favor of
forcing syntactic join order whenever an upper outer join's predicate
doesn't mention a lower outer join's LHS. This still allows the
chained-outer-joins style that is the normally optimizable case.
I also tightened things up some more in join_is_legal(). It seems to me
on review that what's really happening in the exception case where we
ignore a mismatched special join is that we're allowing the proposed join
to associate into the RHS of the outer join we're comparing it to. As
such, we should *always* insist that the proposed join be a left join,
which eliminates a bunch of rather dubious argumentation. The case where
we weren't enforcing that was the one that was already known buggy anyway
(it had a violatable Assert before the aforesaid commit) so it hardly
deserves a lot of deference.
Back-patch to all active branches, like the previous patch. The added
regression test case failed in all branches back to 9.1, and I think it's
only an unrelated change in costing calculations that kept 9.0 from
choosing a broken plan.
If some, but not all, of the length word has already been read, and the
next attempt to read sees exactly the number of bytes needed to complete
the length word, or fewer, then we'll incorrectly read less than all of
the available data.
Antonin Houska
Commit e5550d5fec added some new
tests for ALTER TABLE which involved table scans. When
default_transaction_isolation = 'serializable' these acquire
relation-level SIReadLocks. The test results didn't cope with
that. Add SIReadLock as the minimum lock level for purposes of
these tests.
This could also be fixed by excluding this type of lock from the
my_locks view, but it would be a bug for SIReadLock to show up for
a relation which was not otherwise locked, so do it this way to
allow that sort of condition to cause a regression test failure.
There is some question whether we could avoid taking SIReadLocks
during these operations, but confirming the safety of that and
figuring out how to avoid the locks is not trivial, and would be
a separate patch.
Backpatch to 9.4 where the new tests were added.
Per the discussion in optimizer/README, it's unsafe to reassociate anything
into or out of the RHS of a SEMI or ANTI join. An example from Piotr
Stefaniak showed that join_is_legal() wasn't sufficiently enforcing this
rule, so lock it down a little harder.
I couldn't find a reasonably simple example of the optimizer trying to
do this, so no new regression test. (Piotr's example involved the random
search in GEQO accidentally trying an invalid case and triggering a sanity
check way downstream in clause selectivity estimation, which did not seem
like a sequence of events that would be useful to memorialize in a
regression test as-is.)
Back-patch to all active branches.
Per discussion, it really ought to do this. The original choice to
exclude shell types was probably made in the dark ages before we made
it harder to accidentally create shell types; but that was in 7.3.
Also, cause the standard regression tests to leave a shell type behind,
for convenience in testing the case in pg_dump and pg_upgrade.
Back-patch to all supported branches.
The tuplesort/tuplestore memory management logic assumed that the chunk
allocation overhead for its memtuples array could not increase when
increasing the array size. This is and always was true for tuplesort,
but we (I, I think) blindly copied that logic into tuplestore.c without
noticing that the assumption failed to hold for the much smaller array
elements used by tuplestore. Given rather small work_mem, this could
result in an improper complaint about "unexpected out-of-memory situation",
as reported by Brent DeSpain in bug #13530.
The easiest way to fix this is just to increase tuplestore's initial
array size so that the assumption holds. Rather than relying on magic
constants, though, let's export a #define from aset.c that represents
the safe allocation threshold, and make tuplestore's calculation depend
on that.
Do the same in tuplesort.c to keep the logic looking parallel, even though
tuplesort.c isn't actually at risk at present. This will keep us from
breaking it if we ever muck with the allocation parameters in aset.c.
Back-patch to all supported versions. The error message doesn't occur
pre-9.3, not so much because the problem can't happen as because the
pre-9.3 tuplestore code neglected to check for it. (The chance of
trouble is a great deal larger as of 9.3, though, due to changes in the
array-size-increasing strategy.) However, allowing LACKMEM() to become
true unexpectedly could still result in less-than-desirable behavior,
so let's patch it all the way back.
In commit b514a7460d, I changed the planner
so that it would allow nestloop paths to remain partially parameterized,
ie the inner relation might need parameters from both the current outer
relation and some upper-level outer relation. That's fine so long as we're
talking about distinct parameters; but the patch also allowed creation of
nestloop paths for cases where the inner relation's parameter was a
PlaceHolderVar whose eval_at set included the current outer relation and
some upper-level one. That does *not* work.
In principle we could allow such a PlaceHolderVar to be evaluated at the
lower join node using values passed down from the upper relation along with
values from the join's own outer relation. However, nodeNestloop.c only
supports simple Vars not arbitrary expressions as nestloop parameters.
createplan.c is also a few bricks shy of being able to handle such cases;
it misplaces the PlaceHolderVar parameters in the plan tree, which is why
the visible symptoms of this bug are "plan should not reference subplan's
variable" and "failed to assign all NestLoopParams to plan nodes" planner
errors.
Adding the necessary complexity to make this work doesn't seem like it
would be repaid in significantly better plans, because in cases where such
a PHV exists, there is probably a corresponding join order constraint that
would allow a good plan to be found without using the star-schema exception.
Furthermore, adding complexity to nodeNestloop.c would create a run-time
penalty even for plans where this whole consideration is irrelevant.
So let's just reject such paths instead.
Per fuzz testing by Andreas Seltenreich; the added regression test is based
on his example query. Back-patch to 9.2, like the previous patch.
It must be possible to multiply wal_buffers by XLOG_BLCKSZ without
overflowing int, or calculations in StartupXLOG will go badly wrong
and crash the server. Avoid that by imposing a maximum value on
wal_buffers. This will be just under 2GB, assuming the usual value
for XLOG_BLCKSZ.
Josh Berkus, per an analysis by Andrew Gierth.
Commit c9b0cbe98b accidentally broke the
order of operations during postmaster shutdown: it resulted in removing
the per-socket lockfiles after, not before, postmaster.pid. This creates
a race-condition hazard for a new postmaster that's started immediately
after observing that postmaster.pid has disappeared; if it sees the
socket lockfile still present, it will quite properly refuse to start.
This error appears to be the explanation for at least some of the
intermittent buildfarm failures we've seen in the pg_upgrade test.
Another problem, which has been there all along, is that the postmaster
has never bothered to close() its listen sockets, but has just allowed them
to close at process death. This creates a different race condition for an
incoming postmaster: it might be unable to bind to the desired listen
address because the old postmaster is still incumbent. This might explain
some odd failures we've seen in the past, too. (Note: this is not related
to the fact that individual backends don't close their client communication
sockets. That behavior is intentional and is not changed by this patch.)
Fix by adding an on_proc_exit function that closes the postmaster's ports
explicitly, and (in 9.3 and up) reshuffling the responsibility for where
to unlink the Unix socket files. Lock file unlinking can stay where it
is, but teach it to unlink the lock files in reverse order of creation.
If a call to WaitForXLogInsertionsToFinish() returned a value in the middle
of a page, and another backend then started to insert a record to the same
page, and then you called WaitXLogInsertionsToFinish() again, the second
call might return a smaller value than the first call. The problem was in
GetXLogBuffer(), which always updated the insertingAt value to the
beginning of the requested page, not the actual requested location. Because
of that, the second call might return a xlog pointer to the beginning of
the page, while the first one returned a later position on the same page.
XLogFlush() performs two calls to WaitXLogInsertionsToFinish() in
succession, and holds WALWriteLock on the second call, which can deadlock
if the second call to WaitXLogInsertionsToFinish() blocks.
Reported by Spiros Ioannou. Backpatch to 9.4, where the more scalable
WALInsertLock mechanism, and this bug, was introduced.
An outer join clause that didn't actually reference the RHS (perhaps only
after constant-folding) could confuse the join order enforcement logic,
leading to wrong query results. Also, nested occurrences of such things
could trigger an Assertion that on reflection seems incorrect.
Per fuzz testing by Andreas Seltenreich. The practical use of such cases
seems thin enough that it's not too surprising we've not heard field
reports about it.
This has been broken for a long time, so back-patch to all active branches.
In many cases, we can implement a semijoin as a plain innerjoin by first
passing the righthand-side relation through a unique-ification step.
However, one of the cases where this does NOT work is where the RHS has
a LATERAL reference to the LHS; that makes the RHS dependent on the LHS
so that unique-ification is meaningless. joinpath.c understood this,
and so would not generate any join paths of this kind ... but join_is_legal
neglected to check for the case, so it would think that we could do it.
The upshot would be a "could not devise a query plan for the given query"
failure once we had failed to generate any join paths at all for the bogus
join pair.
Back-patch to 9.3 where LATERAL was added.
Responsibility was formerly split between Makefile.global and pgxs.mk.
As a result of commit b58233c71b, in the
PGXS case, these variables were unset while parsing Makefile.global and
callees. Inclusion of Makefile.custom did not work from PGXS, and the
subtle difference seemed like a recipe for future bugs. Back-patch to
9.4, where that commit first appeared.
Although I think on all modern machines floating division by zero
results in Infinity not SIGFPE, we still don't want infinities
running around in the planner's costing estimates; too much risk
of that leading to insane behavior.
grouping_planner() failed to consider the possibility that final_rel
might be known dummy and hence have zero rowcount. (I wonder if it
would be better to set a rows estimate of 1 for dummy relations?
But at least in the back branches, changing this convention seems
like a bad idea, so I'll leave that for another day.)
Make certain that get_variable_numdistinct() produces a nonzero result.
The case that can be shown to be broken is with stadistinct < 0.0 and
small ntuples; we did not prevent the result from rounding to zero.
For good luck I applied clamp_row_est() to all the nonconstant return
values.
In ExecChooseHashTableSize(), Assert that we compute positive nbuckets
and nbatch. I know of no reason to think this isn't the case, but it
seems like a good safety check.
Per reports from Piotr Stefaniak. Back-patch to all active branches.
Don't print a WARNING if we get ESRCH from a kill() that's attempting
to cancel an autovacuum worker. It's possible (and has been seen in the
buildfarm) that the worker is already gone by the time we are able to
execute the kill, in which case the failure is harmless. About the only
plausible reason for reporting such cases would be to help debug corrupted
lock table contents, but this is hardly likely to be the most important
symptom if that happens. Moreover issuing a WARNING might scare users
more than is warranted.
Also, since sending a signal to an autovacuum worker is now entirely a
routine thing, and the worker will log the query cancel on its end anyway,
reduce the message saying we're doing that from LOG to DEBUG1 level.
Very minor cosmetic cleanup as well.
Since the main practical reason for doing this is to avoid unnecessary
buildfarm failures, back-patch to all active branches.
While postgres' use of SSL renegotiation is a good idea in theory, it
turned out to not work well in practice. The specification and openssl's
implementation of it have lead to several security issues. Postgres' use
of renegotiation also had its share of bugs.
Additionally OpenSSL has a bunch of bugs around renegotiation, reported
and open for years, that regularly lead to connections breaking with
obscure error messages. We tried increasingly complex workarounds to get
around these bugs, but we didn't find anything complete.
Since these connection breakages often lead to hard to debug problems,
e.g. spuriously failing base backups and significant latency spikes when
synchronous replication is used, we have decided to change the default
setting for ssl renegotiation to 0 (disabled) in the released
backbranches and remove it entirely in 9.5 and master..
Author: Michael Paquier, with changes by me
Discussion: 20150624144148.GQ4797@alap3.anarazel.de
Backpatch: 9.0-9.4; 9.5 and master get a different patch
