psql's \connect claims to be able to re-use previous connection
parameters, but in fact it only re-uses the database name, user name,
host name (and possibly hostaddr, depending on version), and port.
This is problematic for assorted use cases. Notably, pg_dump[all]
emits "\connect databasename" commands which we would like to have
re-use all other parameters. If such a script is loaded in a psql run
that initially had "-d connstring" with some non-default parameters,
those other parameters would be lost, potentially causing connection
failure. (Thus, this is the same kind of bug addressed in commits
a45bc8a4f and 8e5793ab6, although the details are much different.)
To fix, redesign do_connect() so that it pulls out all properties
of the old PGconn using PQconninfo(), and then replaces individual
properties in that array. In the case where we don't wish to re-use
anything, get libpq's default settings using PQconndefaults() and
replace entries in that, so that we don't need different code paths
for the two cases.
This does result in an additional behavioral change for cases where
the original connection parameters allowed multiple hosts, say
"psql -h host1,host2", and the \connect request allows re-use of the
host setting. Because the previous coding relied on PQhost(), it
would only permit reconnection to the same host originally selected.
Although one can think of scenarios where that's a good thing, there
are others where it is not. Moreover, that behavior doesn't seem to
meet the principle of least surprise, nor was it documented; nor is
it even clear it was intended, since that coding long pre-dates the
addition of multi-host support to libpq. Hence, this patch is content
to drop it and re-use the host list as given.
Per Peter Eisentraut's comments on bug #16604. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/16604-933f4b8791227b15@postgresql.org
When told to process all databases, clusterdb, reindexdb, and vacuumdb
would reconnect by replacing their --maintenance-db parameter with the
name of the target database. If that parameter is a connstring (which
has been allowed for a long time, though we failed to document that
before this patch), we'd lose any other options it might specify, for
example SSL or GSS parameters, possibly resulting in failure to connect.
Thus, this is the same bug as commit a45bc8a4f fixed in pg_dump and
pg_restore. We can fix it in the same way, by using libpq's rules for
handling multiple "dbname" parameters to add the target database name
separately. I chose to apply the same refactoring approach as in that
patch, with a struct to handle the command line parameters that need to
be passed through to connectDatabase. (Maybe someday we can unify the
very similar functions here and in pg_dump/pg_restore.)
Per Peter Eisentraut's comments on bug #16604. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/16604-933f4b8791227b15@postgresql.org
- Misc grammar and punctuation fixes.
- Stylistic cleanup: use spaces between function arguments and JSON fields
in examples. For example "foo(a,b)" -> "foo(a, b)". Add semicolon after
last END in a few PL/pgSQL examples that were missing them.
- Make sentence that talked about "..." and ".." operators more clear,
by avoiding to end the sentence with "..". That makes it look the same
as "..."
- Fix syntax description for HAVING: HAVING conditions cannot be repeated
Patch by Justin Pryzby, per Yaroslav Schekin's report. Backpatch to all
supported versions, to the extent that the patch applies easily.
Discussion: https://www.postgresql.org/message-id/20201005191922.GE17626%40telsasoft.com
The Windows documentation insists that every WSAStartup call should
have a matching WSACleanup call. However, if that ever had actual
relevance, it wasn't in this century. Every remotely-modern Windows
kernel is capable of cleaning up when a process exits without doing
that, and must be so to avoid resource leaks in case of a process
crash. Moreover, Postgres backends have done WSAStartup without
WSACleanup since commit 4cdf51e64 in 2004, and we've never seen any
indication of a problem with that.
libpq's habit of doing WSAStartup during connection start and
WSACleanup during shutdown is also rather inefficient, since a
series of non-overlapping connection requests leads to repeated,
quite expensive DLL unload/reload cycles. We document a workaround
for that (having the application call WSAStartup for itself), but
that's just a kluge. It's also worth noting that it's far from
uncommon for applications to exit without doing PQfinish, and
we've not heard reports of trouble from that either.
However, the real reason for acting on this is that recent
experiments by Alexander Lakhin show that calling WSACleanup
during PQfinish is triggering the symptom we occasionally see
that a process using libpq fails to emit expected stdio output.
Therefore, let's change libpq so that it calls WSAStartup only
once per process, during the first connection attempt, and never
calls WSACleanup at all.
While at it, get rid of the only other WSACleanup call in our code
tree, in pg_dump/parallel.c; that presumably is equally useless.
Back-patch of HEAD commit 7d00a6b2d.
Discussion: https://postgr.es/m/ac976d8c-03df-d6b8-025c-15a2de8d9af1@postgrespro.ru
Section 8.5.1.4, which defines these literals, made only a vague
reference to the fact that they might be evaluated too soon to be
safe in non-interactive contexts. Provide a more explicit caution
against misuse. Also, generalize the wording in the related tip in
section 9.9.4: while it clearly described this problem, it implied
(or really, stated outright) that the problem only applies to table
DEFAULT clauses.
Per gripe from Tijs van Dam. Back-patch to all supported branches.
Discussion: https://postgr.es/m/c2LuRv9BiRT3bqIo5mMQiVraEXey_25B4vUn0kDqVqilwOEu_iVF1tbtvLnyQK7yDG3PFaz_GxLLPil2SDkj1MCObNRVaac-7j1dVdFERk8=@thalex.com
Commit a97e85f2b caused "exceed the available area" warnings in PDF
builds. Fine-tune colwidth values to avoid that.
Back-patch to 9.6, like the prior patch. (This is of dubious value
before v13, since we were far from free of such warnings in older
branches. But we might as well keep the SGML looking the same in all
branches.)
Per buildfarm.
Previously, a conversion such as
to_date('-44-02-01','YYYY-MM-DD')
would result in '0045-02-01 BC', as the code attempted to interpret
the negative year as BC, but failed to apply the correction needed
for our internal handling of BC years. Fix the off-by-one problem.
Also, arrange for the combination of a negative year and an
explicit "BC" marker to cancel out and produce AD. This is how
the negative-century case works, so it seems sane to do likewise.
Continue to read "year 0000" as 1 BC. Oracle would throw an error,
but we've accepted that case for a long time so I'm hesitant to
change it in a back-patch.
Per bug #16419 from Saeed Hubaishan. Back-patch to all supported
branches.
Dar Alathar-Yemen and Tom Lane
Discussion: https://postgr.es/m/16419-d8d9db0a7553f01b@postgresql.org
Previously the standby server didn't archive timeline history files
streamed from the primary even when archive_mode is set to "always",
while it archives the streamed WAL files. This could cause the PITR to
fail because there was no required timeline history file in the archive.
The cause of this issue was that walreceiver didn't mark those files as
ready for archiving.
This commit makes walreceiver mark those streamed timeline history
files as ready for archiving if archive_mode=always. Then the archiver
process archives the marked timeline history files.
Back-patch to all supported versions.
Reported-by: Grigory Smolkin
Author: Grigory Smolkin, Fujii Masao
Reviewed-by: David Zhang, Anastasia Lubennikova
Discussion: https://postgr.es/m/54b059d4-2b48-13a4-6f43-95a087c92367@postgrespro.ru
We have had multiple reports that point to the
'@colReorder=latn-digit' collation customization being buggy. We have
reported this to ICU and are waiting for a fix. In the meantime,
remove references to this from the documentation and replace it by
another reordering example. Apparently, many users have been picking
up this example specifically from the documentation.
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Discussion: https://www.postgresql.org/message-id/flat/153201618542.1404.3611626898935613264%40wrigleys.postgresql.org
Back-patch key parts of 4c5cf5431 and 6ca547cf7 into stable branches.
I didn't touch pg_description entries here, so it's purely a docs
change; and I didn't fool with any examples either. The main point
is so that anyone who's wondering if factorial() exists in the stable
branches will be reassured.
Mark Dilger and John Naylor, with some adjustments by me
Discussion: https://postgr.es/m/BE2DF53D-251A-4E26-972F-930E523580E9@enterprisedb.com
The SimpleLruTruncate() header comment states the new coding rule. To
achieve this, add locktype "frozenid" and two LWLocks. This closes a
rare opportunity for data loss, which manifested as "apparent
wraparound" or "could not access status of transaction" errors. Data
loss is more likely in pg_multixact, due to released branches' thin
margin between multiStopLimit and multiWrapLimit. If a user's physical
replication primary logged ": apparent wraparound" messages, the user
should rebuild standbys of that primary regardless of symptoms. At less
risk is a cluster having emitted "not accepting commands" errors or
"must be vacuumed" warnings at some point. One can test a cluster for
this data loss by running VACUUM FREEZE in every database. Back-patch
to 9.5 (all supported versions).
Discussion: https://postgr.es/m/20190218073103.GA1434723@rfd.leadboat.com
Up to now, upon receipt of a SIGTERM ("smart shutdown" command), the
postmaster has immediately killed all "optional" background processes,
and subsequently refused to launch new ones while it's waiting for
foreground client processes to exit. No doubt this seemed like an OK
policy at some point; but it's a pretty bad one now, because it makes
for a seriously degraded environment for the remaining clients:
* Parallel queries are killed, and new ones fail to launch. (And our
parallel-query infrastructure utterly fails to deal with the case
in a reasonable way --- it just hangs waiting for workers that are
not going to arrive. There is more work needed in that area IMO.)
* Autovacuum ceases to function. We can tolerate that for awhile,
but if bulk-update queries continue to run in the surviving client
sessions, there's eventually going to be a mess. In the worst case
the system could reach a forced shutdown to prevent XID wraparound.
* The bgwriter and walwriter are also stopped immediately, likely
resulting in performance degradation.
Hence, let's rearrange things so that the only immediate change in
behavior is refusing to let in new normal connections. Once the last
normal connection is gone, shut everything down as though we'd received
a "fast" shutdown. To implement this, remove the PM_WAIT_BACKUP and
PM_WAIT_READONLY states, instead staying in PM_RUN or PM_HOT_STANDBY
while normal connections remain. A subsidiary state variable tracks
whether or not we're letting in new connections in those states.
This also allows having just one copy of the logic for killing child
processes in smart and fast shutdown modes. I moved that logic into
PostmasterStateMachine() by inventing a new state PM_STOP_BACKENDS.
Back-patch to 9.6 where parallel query was added. In principle
this'd be a good idea in 9.5 as well, but the risk/reward ratio
is not as good there, since lack of autovacuum is not a problem
during typical uses of smart shutdown.
Per report from Bharath Rupireddy.
Patch by me, reviewed by Thomas Munro
Discussion: https://postgr.es/m/CALj2ACXAZ5vKxT9P7P89D87i3MDO9bfS+_bjMHgnWJs8uwUOOw@mail.gmail.com
Hostile objects located within the installation-time search_path could
capture references in an extension's installation or upgrade script.
If the extension is being installed with superuser privileges, this
opens the door to privilege escalation. While such hazards have existed
all along, their urgency increases with the v13 "trusted extensions"
feature, because that lets a non-superuser control the installation path
for a superuser-privileged script. Therefore, make a number of changes
to make such situations more secure:
* Tweak the construction of the installation-time search_path to ensure
that references to objects in pg_catalog can't be subverted; and
explicitly add pg_temp to the end of the path to prevent attacks using
temporary objects.
* Disable check_function_bodies within installation/upgrade scripts,
so that any security gaps in SQL-language or PL-language function bodies
cannot create a risk of unwanted installation-time code execution.
* Adjust lookup of type input/receive functions and join estimator
functions to complain if there are multiple candidate functions. This
prevents capture of references to functions whose signature is not the
first one checked; and it's arguably more user-friendly anyway.
* Modify various contrib upgrade scripts to ensure that catalog
modification queries are executed with secure search paths. (These
are in-place modifications with no extension version changes, since
it is the update process itself that is at issue, not the end result.)
Extensions that depend on other extensions cannot be made fully secure
by these methods alone; therefore, revert the "trusted" marking that
commit eb67623c9 applied to earthdistance and hstore_plperl, pending
some better solution to that set of issues.
Also add documentation around these issues, to help extension authors
write secure installation scripts.
Patch by me, following an observation by Andres Freund; thanks
to Noah Misch for review.
Security: CVE-2020-14350
In "High Availability, Load Balancing, and Replication" chapter,
certain descriptions of Pgpool-II were not correct at this point. It
does not need conflict resolution. Also "Multiple-Server Parallel
Query Execution" is not supported anymore.
Discussion: https://postgr.es/m/20200726.230128.53842489850344110.t-ishii%40sraoss.co.jp
Author: Tatsuo Ishii
Reviewed-by: Bruce Momjian
Backpatch-through: 9.5
TLS 1.3 uses a different way of specifying ciphers and a different
OpenSSL API. PostgreSQL currently does not support setting those
ciphers. For now, just document this. In the future, support for
this might be added somehow.
Reviewed-by: Jonathan S. Katz <jkatz@postgresql.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
This coding technique is unsafe, since we'd be accessing off the end
of the tuple if the field is null. SIGSEGV is pretty improbable, but
perhaps not impossible. Also, returning garbage for the LSN doesn't
seem like a great idea, even if callers aren't looking at it today.
Also update docs to point out explicitly that
pg_subscription.subslotname and pg_subscription_rel.srsublsn
can be null.
Perhaps we should mark these two fields BKI_FORCE_NULL, so that
they'd be correctly labeled in databases that are initdb'd in the
future. But we can't force that for existing databases, and on
balance it's not too clear that having a mix of different catalog
contents in the field would be wise.
Apply to v10 (where this code came in) through v12. Already
fixed in v13 and HEAD.
Discussion: https://postgr.es/m/732838.1595278439@sss.pgh.pa.us
Re-point comp.ai.genetic FAQ link to a more stable address.
Remove stale links to AIX documentation; we don't really need to
tell AIX users how to use their systems.
Remove stale links to HP documentation about SSL. We've had to
update those twice before, making it increasingly obvious that
HP does not intend them to be stable landing points. They're
not particularly authoritative, either. (This change effectively
reverts bbd3bdba3.)
Daniel Gustafsson and Álvaro Herrera, per a gripe from
Kyotaro Horiguchi. Back-patch, since these links are
just as dead in the back branches.
Discussion: https://postgr.es/m/20200709.161226.204639179120026914.horikyota.ntt@gmail.com
pg_stat_activity.query text is truncated at 1024 bytes. But previously
the document described that it's truncated at 1024 characters.
This was not accurate when considering multibyte characters.
Back-patch to v10 where this inaccurate description was added.
Author: Atsushi Torikoshi
Reviewed-by: Daniel Gustafsson, Fujii Masao
Discussion: https://postgr.es/m/cd5b49a5a14e887542f5f569c1c6bde2@oss.nttdata.com
After running GetForeignRelSize for a foreign table, adjust rel->tuples
to be at least as large as rel->rows. This prevents bizarre behavior
in estimate_num_groups() and perhaps other places, especially in the
scenario where rel->tuples is zero because pg_class.reltuples is
(suggesting that ANALYZE has never been run for the table). As things
stood, we'd end up estimating one group out of any GROUP BY on such a
table, whereas the default group-count estimate is more likely to result
in a sane plan.
Also, clarify in the documentation that GetForeignRelSize has the option
to override the rel->tuples value if it has a better idea of what to use
than what is in pg_class.reltuples.
Per report from Jeff Janes. Back-patch to all supported branches.
Patch by me; thanks to Etsuro Fujita for review
Discussion: https://postgr.es/m/CAMkU=1xNo9cnan+Npxgz0eK7394xmjmKg-QEm8wYG9P5-CcaqQ@mail.gmail.com
Warnings start 10M transactions before xidStopLimit, which is 11M
transactions before wraparound. The sample WARNING output showed a
value greater than 11M, and its HINT message predated commit
25ec228ef7. Hence, the sample was
impossible. Back-patch to 9.5 (all supported versions).
The IANA time zone folk have deprecated use of a "posixrules" file in
the tz database. While for now it's our choice whether to keep
supplying one in our own builds, installations built with
--with-system-tzdata will soon be needing to cope with that file not
being present, at least on some platforms.
This causes a problem for the horology test, which expected the
nonstandard POSIX zone spec "CST7CDT" to apply pre-2007 US daylight
savings rules. That does happen if the posixrules file supplies such
information, but otherwise the test produces undesired results.
To fix, add an explicit transition date rule that matches 2005 practice.
(We could alternatively have switched the test to use some real time
zone, but it seems useful to have coverage of this type of zone spec.)
While at it, update a documentation example that also relied on
"CST7CDT"; use a real-world zone name instead. Also, document why
the zone names EST5EDT, CST6CDT, MST7MDT, PST8PDT aren't subject to
similar failures when "posixrules" is missing.
Back-patch to all supported branches, since the hazard is the same
for all.
Discussion: https://postgr.es/m/1665379.1592581287@sss.pgh.pa.us
We'd glossed over most of this complexity for years, but it's hard
to avoid writing it all down now, so that we can explain what happens
when there's no "posixrules" file in the IANA time zone database.
That was at best a tiny minority situation till now, but it's likely
to become quite common in the future, so we'd better explain it.
Nonetheless, we don't really encourage people to use POSIX zone specs;
picking a named zone is almost always what you really want, unless
perhaps you're stuck with an out-of-date zone database. Therefore,
let's shove all this detail into an appendix.
Patch by me; thanks to Robert Haas for help with some awkward wording.
Discussion: https://postgr.es/m/1390.1562258309@sss.pgh.pa.us
Our documentation failed to point out that REPEATABLE READ is really
snapshot isolation, which might be important to some users. Point to
the standard reference paper for this complicated topic.
Likewise, add a reference to the VLDB paper about PostgreSQL SSI, for
technical information about our SSI implementation and how it compares
to S2PL.
While here, add a note about catalog access using a lower isolation
level, per recent user complaint.
Back-patch to all releases.
Reported-by: Kyle Kingsbury <aphyr@jepsen.io>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Tatsuo Ishii <ishii@sraoss.co.jp>
Discussion: https://postgr.es/m/db7b729d-0226-d162-a126-8a8ab2dc4443%40jepsen.io
Discussion: https://postgr.es/m/16454-9408996bb1750faf%40postgresql.org
In PostgreSQL 10, we stopped using System V semaphores on Linux
systems. Update the example we give of an error message from a
misconfigured system to show what people are most likely to see these
days.
Back-patch to 10, where PREFERRED_SEMAPHORES=UNNAMED_POSIX arrived.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGLmJUSwybaPQv39rB8ABpqJq84im2UjZvyUY4feYhpWMw%40mail.gmail.com
The description missed a comma and lacked an explanation of what happens
with REPLICA IDENTITY USING INDEX when the dependent index is dropped.
Author: Marina Polyakova
Reviewed-by: Daniel Gustafsson, Michael Paquier
Discussion: https://postgr.es/m/ad1a0badc32658b1bbb07aa312346a1d@postgrespro.ru
Backpatch-through: 9.5
The docs explained that a SHARE ROW EXCLUSIVE lock is needed on the
referenced table, but failed to say the same about the table being
altered. Since the page says that ACCESS EXCLUSIVE lock is taken
unless otherwise stated, this left readers with the wrong conclusion.
Discussion: https://postgr.es/m/834603375.3470346.1586482852542@mail.yahoo.com
CREATE GROUP is an exact alias for CREATE ROLE, and CREATE USER is
almost an exact alias, as can easily be confirmed by checking the
code. So the man page syntax descriptions ought to match up. The
last few additions of role options seem to have forgotten to update
create_group.sgml, though. Fix that, and add a naggy reminder to
create_role.sgml in hopes of not forgetting again.
Discussion: https://postgr.es/m/158647836143.655.9853963229391401576@wrigleys.postgresql.org
The documentation says that the max length is 255 bytes, but
code inspection says it's actually 255 characters; and relevant
lengths are stored as uint16 so that that works.
These uint16 fields could be overflowed by excessively long input,
producing strange results. Complain for invalid input.
Likewise check for out-of-range values of the repeat counts in lquery.
(We don't try too hard on that one, notably not bothering to detect
if atoi's result has overflowed.)
Also detect length overflow in ltree_concat.
In passing, be more consistent about whether "syntax error" messages
include the type name. Also, clarify the documentation about what
the size limit is.
This has been broken for a long time, so back-patch to all supported
branches.
Nikita Glukhov, reviewed by Benjie Gillam and Tomas Vondra
Discussion: https://postgr.es/m/CAP_rww=waX2Oo6q+MbMSiZ9ktdj6eaJj0cQzNu=Ry2cCDij5fw@mail.gmail.com
src/port/getopt_long.c failed on such an argument, always seeing it
as an unrecognized switch. This is unhelpful; better is to treat such
an item as a non-switch argument. That behavior is what we find in
GNU's getopt_long(); it's what src/port/getopt.c does; and it is
required by POSIX for getopt(), which getopt_long() ought to be
generally a superset of. Moreover, it's expected by ecpg, which
intends an argument of "-" to mean "read from stdin". So fix it.
Also add some documentation about ecpg's behavior in this area, since
that was miserably underdocumented. I had to reverse-engineer it
from the code.
Per bug #16304 from James Gray. Back-patch to all supported branches,
since this has been broken forever.
Discussion: https://postgr.es/m/16304-c662b00a1322db7f@postgresql.org
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Back-patch to 9.5 (all supported versions). This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC. As
always, update standby systems before master systems. This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions. (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
This commit corrects the descriptions of RecoveryWalAll and RecoveryWalStream
wait events in the documentation.
Back-patch to v10 where those wait events were added.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Atsushi Torikoshi
Discussion: https://postgr.es/m/124997ee-096a-5d09-d8da-2c7a57d0816e@oss.nttdata.com
I noticed that we completely failed to document the restriction
that an "anyrange" result type has to be inferred from an "anyrange"
input. The docs also were less clear than they could be about the
relationship between "anyrange" and "anyarray".
It's been like this all along, so back-patch.
If pkg-config is installed and knows about libxml2, use its information
rather than asking xml2-config. Otherwise proceed as before. This
patch allows "configure --with-libxml" to succeed on platforms that
have pkg-config but not xml2-config, which is likely to soon become
a typical situation.
The old mechanism can be forced by setting XML2_CONFIG explicitly
(hence, build processes that were already doing so will certainly
not need adjustment). Also, it's now possible to set XML2_CFLAGS
and XML2_LIBS explicitly to override both programs.
There is a small risk of this breaking existing build processes,
if there are multiple libxml2 installations on the machine and
pkg-config disagrees with xml2-config about which to use. The
only case where that seems really likely is if a builder has tried
to select a non-default xml2-config by putting it early in his PATH
rather than setting XML2_CONFIG. Plan to warn against that in the
minor release notes.
Back-patch to v10; before that we had no pkg-config infrastructure,
and it doesn't seem worth adding it for this.
Hugh McMaster and Tom Lane; Peter Eisentraut also made an earlier
attempt at this, from which I lifted most of the docs changes.
Discussion: https://postgr.es/m/CAN9BcdvfUwc9Yx5015bLH2TOiQ-M+t_NADBSPhMF7dZ=pLa_iw@mail.gmail.com
This extends the fixes made in commit 085b6b667 to other SRFs with the
same bug, namely pg_logdir_ls(), pgrowlocks(), pg_timezone_names(),
pg_ls_dir(), and pg_tablespace_databases().
Also adjust various comments and documentation to warn against
expecting to clean up resources during a ValuePerCall SRF's final
call.
Back-patch to all supported branches, since these functions were
all born broken.
Justin Pryzby, with cosmetic tweaks by me
Discussion: https://postgr.es/m/20200308173103.GC1357@telsasoft.com
This should of course be just "PG_ARGISNULL()".
Also reorder a couple of paras to make the discussion of PG_ARGISNULL
less disjointed.
Back-patch to v10 where the error was introduced.
Laurenz Albe and Tom Lane, per an anonymous docs comment
Discussion: https://postgr.es/m/158399487096.5708.10696365251766477013@wrigleys.postgresql.org
Previously the documentation explains that WAL segment files
start at 000000010000000000000000. But the first WAL segment file
that initdb creates is 000000010000000000000001 not
000000010000000000000000. This change was caused by old
commit 8c843fff2d, but the documentation had not been updated
a long time.
Back-patch to all supported branches.
Author: Fujii Masao
Reviewed-by: David Zhang
Discussion: https://postgr.es/m/CAHGQGwHOmGe2OqGOmp8cOfNVDivq7dbV74L5nUGr+3eVd2CU2Q@mail.gmail.com
Access to this module is granted to the pg_monitor role, not
pg_read_all_stats. (Given the view's performance impact,
it seems wise to be restrictive, so I think this was the
correct decision --- and anyway it was clearly intentional.)
Per bug #16279 from Philip Semanchuk.
Discussion: https://postgr.es/m/16279-fcaac33c68aab0ab@postgresql.org
Creating a bunch of non-overlapping partial indexes is generally
a bad idea, so add an example saying not to do that.
Back-patch to v10. Before that, the alternative of using (real)
partitioning wasn't available, so that the tradeoff isn't quite
so clear cut.
Discussion: https://postgr.es/m/CAKVFrvFY-f7kgwMRMiPLbPYMmgjc8Y2jjUGK_Y0HVcYAmU6ymg@mail.gmail.com
The GRANTED BY clause in GRANT/REVOKE ROLE has been there since 2005
but was never documented. I'm not sure now whether that was just an
oversight or was intentional (given the limited capability of the
option). But seeing that pg_dumpall does emit code that uses this
option, it seems like not documenting it at all is a bad idea.
Also, when we upgraded the syntax to allow CURRENT_USER/SESSION_USER
as the privilege recipient, the role form of GRANT was incorrectly
not modified to show that, and REVOKE's docs weren't touched at all.
Although I'm not that excited about GRANTED BY, the other oversight
seems serious enough to justify a back-patch.
Discussion: https://postgr.es/m/3070.1581526786@sss.pgh.pa.us
Inherited queries perform access permission checks on the parent
table only. But there are two exceptions to this rule in v12 or before;
TRUNCATE and LOCK TABLE commands through a parent table check
the permissions on not only the parent table but also the children
tables. Previously these exceptions were not documented.
This commit adds the note about these exceptions, into the document.
Back-patch to v9.4. But we don't apply this commit to the master
because commit e6f1e560e4 already got rid of the exception about
inherited TRUNCATE and upcoming commit will do for the exception
about inherited LOCK TABLE.
Author: Amit Langote
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CA+HiwqHfTnMU6SUkyHxCmpHUKk7ERLHCR3vZVq19ZOQBjPBLmQ@mail.gmail.com
The docs are ambiguous as to which tables would be copied over when the
copy_data parameter is true in ALTER SUBSCRIPTION ... REFRESH PUBLICATION.
Make it clear that it only applies to tables which are new in the
publication.
Author: David Christensen (reword by Álvaro Herrera)
Discussion: https://postgr.es/m/95339420-7F09-4F8C-ACC0-8F1CFAAD9CD7@endpoint.com
Column defaults may be specified separately for each partition.
But INSERT via a partitioned table ignores those partition's default values.
The former is documented, but the latter restriction not.
This commit adds the note about that restriction into the document.
Back-patch to v10 where partitioning was introduced.
Author: Fujii Masao
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/CAHGQGwEs-59omrfGF7hOHz9iMME3RbKy5ny+iftDx3LHTEn9sA@mail.gmail.com
Attempting to use CREATE INDEX, DROP INDEX or REINDEX with CONCURRENTLY
on a temporary relation with ON COMMIT actions triggered unexpected
errors because those operations use multiple transactions internally to
complete their work. Here is for example one confusing error when using
ON COMMIT DELETE ROWS:
ERROR: index "foo" already contains data
Issues related to temporary relations and concurrent indexing are fixed
in this commit by enforcing the non-concurrent path to be taken for
temporary relations even if using CONCURRENTLY, transparently to the
user. Using a non-concurrent path does not matter in practice as locks
cannot be taken on a temporary relation by a session different than the
one owning the relation, and the non-concurrent operation is more
effective.
The problem exists with REINDEX since v12 with the introduction of
CONCURRENTLY, and with CREATE/DROP INDEX since CONCURRENTLY exists for
those commands. In all supported versions, this caused only confusing
error messages to be generated. Note that with REINDEX, it was also
possible to issue a REINDEX CONCURRENTLY for a temporary relation owned
by a different session, leading to a server crash.
The idea to enforce transparently the non-concurrent code path for
temporary relations comes originally from Andres Freund.
Reported-by: Manuel Rigger
Author: Michael Paquier, Heikki Linnakangas
Reviewed-by: Andres Freund, Álvaro Herrera, Heikki Linnakangas
Discussion: https://postgr.es/m/CA+u7OA6gP7YAeCguyseusYcc=uR8+ypjCcgDDCTzjQ+k6S9ksQ@mail.gmail.com
Backpatch-through: 9.4
We realized years ago that it's better for libpq to accept all
connection parameters syntactically, even if some are ignored or
restricted due to lack of the feature in a particular build.
However, that lesson from the SSL support was for some reason never
applied to the GSSAPI support. This is causing various buildfarm
members to have problems with a test case added by commit 6136e94dc,
and it's just a bad idea from a user-experience standpoint anyway,
so fix it.
While at it, fix some places where parameter-related infrastructure
was added with the aid of a dartboard, or perhaps with the aid of
the anti-pattern "add new stuff at the end". It should be safe
to rearrange the contents of struct pg_conn even in released
branches, since that's private to libpq (and we'd have to move
some fields in some builds to fix this, anyway).
Back-patch to all supported branches.
Discussion: https://postgr.es/m/11297.1576868677@sss.pgh.pa.us
Back-patch commits 36d442a25 and 1f66c657f into all supported
branches. I'd considered doing this when putting in the latter
commit, but failed to pull the trigger. Now that we've had an
actual field complaint about the lack of such docs, let's do it.
Per bug #16158 from Piotr Jander. Original patches by Lætitia Avrot,
Patrick Francelle, and me.
Discussion: https://postgr.es/m/16158-7ccf2f74b3d655db@postgresql.org
Commit 5770172cb0 wrote, incorrectly, that
certain schema usage patterns are secure against CREATEROLE users and
database owners. When an untrusted user is the database owner or holds
CREATEROLE privilege, a query is secure only if its session started with
SELECT pg_catalog.set_config('search_path', '', false) or equivalent.
Back-patch to 9.4 (all supported versions).
Discussion: https://postgr.es/m/20191013013512.GC4131753@rfd.leadboat.com
The existing text stated that "Default privileges that are specified
per-schema are added to whatever the global default privileges are for
the particular object type". However, that bare-bones observation is
not quite clear enough, as demonstrated by the complaint in bug #16124.
Flesh it out by stating explicitly that you can't revoke built-in
default privileges this way, and by providing an example to drive
the point home.
Back-patch to all supported branches, since it's been like this
from the beginning.
Discussion: https://postgr.es/m/16124-423d8ee4358421bc@postgresql.org
Commit 6b76f1bb5 changed all the RADIUS auth parameters to be lists
rather than single values. But its use of SplitIdentifierString
to parse the list format was not very carefully thought through,
because that function thinks it's parsing SQL identifiers, which
means it will (a) downcase the strings and (b) truncate them to
be shorter than NAMEDATALEN. While downcasing should be harmless
for the server names and ports, it's just wrong for the shared
secrets, and probably for the NAS Identifier strings as well.
The truncation aspect is at least potentially a problem too,
though typical values for these parameters would fit in 63 bytes.
Fortunately, we now have a function SplitGUCList that is exactly
the same except for not doing the two unwanted things, so fixing
this is a trivial matter of calling that function instead.
While here, improve the documentation to show how to double-quote
the parameter values. I failed to resist the temptation to do
some copy-editing as well.
Report and patch from Marcos David (bug #16106); doc changes by me.
Back-patch to v10 where the aforesaid commit came in, since this is
arguably a regression from our previous behavior with RADIUS auth.
Discussion: https://postgr.es/m/16106-7d319e4295d08e70@postgresql.org
The example of expansion of multiple views claimed that the resulting
subquery nest would not get fully flattened because of an aggregate
function. There's no aggregate in the example, though, only a user
defined function confusingly named MIN(). In a modern server, the
reason for the non-flattening is that MIN() is volatile, but I'm
unsure whether that was true back when this text was written.
Let's reduce the confusion level by using LEAST() instead (which
we didn't have at the time this example was created). And then
we can just say that the planner will flatten the sub-queries, so
the rewrite system doesn't have to.
Noted by Paul Jungwirth. This text is old enough to vote, so
back-patch to all supported branches.
Discussion: https://postgr.es/m/CA+renyXZFnmp9PcvX1EVR2dR=XG5e6E-AELr8AHCNZ8RYrpnPw@mail.gmail.com
Currently, postgres_fdw does not support preparing a remote transaction
for two-phase commit even in the case where the remote transaction is
read-only, but the old error message appeared to imply that that was not
supported only if the remote transaction modified remote tables. Change
the message so as to include the case where the remote transaction is
read-only.
Also fix a comment above the message.
Also add a note about the lack of supporting PREPARE TRANSACTION to the
postgres_fdw documentation.
Reported-by: Gilles Darold
Author: Gilles Darold and Etsuro Fujita
Reviewed-by: Michael Paquier and Kyotaro Horiguchi
Backpatch-through: 9.4
Discussion: https://postgr.es/m/08600ed3-3084-be70-65ba-279ab19618a5%40darold.net
Starting with PostgreSQL 12, pg_restore refuses to run when neither -d
nor -f are specified (c.f. commit 413ccaa74d), and it also makes "-f -"
mean the old implicit behavior of dumping to stdout. However, older
branches write to a file called ./- when invoked like that, making it
impossible to write pg_restore scripts that work across versions. This
is a partial backpatch of the aforementioned commit to all older
supported branches, providing an upgrade path.
Discussion: https://postgr.es/m/20191006190839.GE18030@telsasoft.com
This clarifies more how to use and how to take advantage of constraints
when attaching a new partition.
Author: Justin Pryzby
Reviewed-by: Amit Langote, Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/20191028001207.GB23808@telsasoft.com
Backpatch-through: 10
This fixes multiple areas of the documentation:
- COPY for its past compatibility section.
- SET ROLE mentioning INHERITS instead of INHERIT
- PREPARE referring to stmt_name, that is not present.
- Extension documentation about format name with upgrade scripts.
Backpatch down to 9.4 for the relevant parts.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/bf95233a-9943-b341-e2ff-a860c28af481@gmail.com
Backpatch-through: 9.4
The array <@ and @> operators do not worry about duplicates: if every
member of array X matches some element of array Y, then X is contained
in Y, even if several members of X get matched to the same Y member.
This was not explicitly stated in the docs though, so improve matters.
Discussion: https://postgr.es/m/156614120484.1310.310161642239149585@wrigleys.postgresql.org
It's important users be able to know (without looking at the source code)
that running DDL or DDL-like commands can interrupt autovacuum which can
lead to a lot of dead tuples and hence slower database operations.
Reported-by: James Coleman
Author: James Coleman
Reviewed-by: Amit Kapila
Backpatch-through: 9.4
Discussion: https://postgr.es/m/CAAaqYe-XYyNwML1=f=gnd0qWg46PnvD=BDrCZ5-L94B887XVxQ@mail.gmail.com
1. Commit 7086be6e3 should have documented the limitation that the direct
modification is disabled when WCO constraints are present, but didn't,
which is definitely my fault. Update the documentation (Postgres 9.6
onwards).
2. Commit fc22b6623 should have documented the limitation that the direct
modification is disabled when generated columns are defined, but
didn't. Update the documentation (Postgres 12 onwards).
Author: Etsuro Fujita
Discussion: https://postgr.es/m/CAPmGK14AYCPunLb6TRz1CQsW5Le01Z2ox8LSOKH0P-cOVDcQRA%40mail.gmail.com
The example used to explain 'Looping Through Query Results' uses
pseudo-materialized views. Replace it with a more up-to-date example
which does the same thing with actual materialized views, which have
been available since PostgreSQL 9.3.
In the passing, change '%' as format specifier instead of '%s' as is used
in other examples in plpgsql.sgml.
Reported-by: Ian Barwick
Author: Ian Barwick
Reviewed-by: Amit Kapila
Backpatch-through: 9.4
Discussion: https://postgr.es/m/9a70d393-7904-4918-c97c-649f6d114b6a@2ndquadrant.com
Give it an explanatory para like the other default roles have.
Don't imply that it can send any signal whatever.
In passing, reorder the table entries and explanatory paras
for the default roles into some semblance of consistency.
Ian Barwick, tweaked a bit by me.
Discussion: https://postgr.es/m/89907e32-76f3-7282-a89c-ea19c722fe5d@2ndquadrant.com
Section 4.2.7 says that unless otherwise specified, built-in
aggregates ignore rows in which any input is null. This is
not true of the JSON aggregates, but it wasn't documented.
Fix that.
Of the other entries in table 9.55, some were explicit about
ignoring nulls, and some weren't; for consistency and
self-contained-ness, make them all say it explicitly.
Per bug #15884 from Tim Möhlmann. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/15884-c32d848f787fcae3@postgresql.org
This adds a section for heap-related functions. These were previously
mixed with functions having a more general purpose, leading to
confusion. While on it, add a query example for fsm_page_contents.
Backpatch down to 10, where b5e3942 introduced the subsections for
function types in pageinspect documentation.
Author: Masahiko Sawada
Discussion: https://postgr.es/m/CAD21AoDyM7E1+cK3-aWejxKTGC-wVVP2B+RnJhN6inXyeRmqzw@mail.gmail.com
Backpatch-through: 10
VACUUM's reference page had this text, but ANALYZE's didn't. That's
a clear oversight given that section 5.7 explicitly delegates the
responsibility to define permissions requirements to the individual
commands' man pages.
Per gripe from Isaac Morland. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAMsGm5fp3oBUs-2iRfii0iEO=fZuJALVyM2zJLhNTjG34gpAVQ@mail.gmail.com
Commit aa27977fe2 introduced this
restriction for pg_temp.function_name(arg); do likewise for types
created in temporary schemas. Programs that this breaks should add
"pg_temp." schema qualification or switch to arg::type_name syntax.
Back-patch to 9.4 (all supported versions).
Reviewed by Tom Lane. Reported by Tom Lane.
Security: CVE-2019-10208
The table has not been updated for some commands introduced in recent
releases, so refresh it. While on it, reorder entries alphabetically.
Backpatch all the way down for all the commands which have gone
missing.
Reported-by: Jeremy Smith
Discussion: https://postgr.es/m/15883-afff0ea3cc2dbbb6@postgresql.org
Backpatch-through: 9.4
Using pg_receivewal with synchronous_commit = remote_apply set in the
backend is incompatible if pg_receivewal is a synchronous standby as it
never applies WAL, so document this problem and solutions to it.
Backpatch to 9.6, where remote_apply has been added.
Author: Robert Haas, Jesper Pedersen
Reviewed-by: Laurenz Albe, Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/1427a2d3-1e51-9335-1931-4f8853d90d5e@redhat.com
Backpatch-through: 9.6
datatype.sgml failed to explain that boolin() accepts any unique
prefix of the basic input strings. Indeed it was actively misleading
because it called out a few minimal prefixes without mentioning that
there were more valid inputs.
I also felt that it wasn't doing anybody any favors by conflating
SQL key words, valid Boolean input, and string literals containing
valid Boolean input. Rewrite in hopes of reducing the confusion.
Per bug #15836 from Yuming Wang, as diagnosed by David Johnston.
Back-patch to supported branches.
Discussion: https://postgr.es/m/15836-656fab055735f511@postgresql.org
A few questionable partitioning designs have been cropping up lately
around the mailing lists. Generally, these cases have been partitioning
using too many partitions which have caused performance or OOM problems for
the users.
Since we have very little else to guide users into good design, here we
add a new section to the partitioning documentation with some best
practise guidelines for good design.
Reviewed-by: Justin Pryzby, Amit Langote, Alvaro Herrera
Discussion: https://postgr.es/m/CAKJS1f-2rx+E9mG3xrCVHupefMjAp1+tpczQa9SEOZWyU7fjEA@mail.gmail.com
Backpatch-through: 10
json_to_record(), when an output column is declared as type json or jsonb,
should emit the corresponding field of the input JSON object. But it got
this slightly wrong when the field is just a string literal: it failed to
escape the contents of the string. That typically resulted in syntax
errors if the string contained any double quotes or backslashes.
jsonb_to_record() handles such cases correctly, but I added corresponding
test cases for it too, to prevent future backsliding.
Improve the documentation, as it provided only a very hand-wavy
description of the conversion rules used by these functions.
Per bug report from Robert Vollmert. Back-patch to v10 where the
error was introduced (by commit cf35346e8).
Note that PG 9.4 - 9.6 also get this case wrong, but differently so:
they feed the de-escaped contents of the string literal to json[b]_in.
That behavior is less obviously wrong, so possibly it's being depended on
in the field, so I won't risk trying to make the older branches behave
like the newer ones.
Discussion: https://postgr.es/m/D6921B37-BD8E-4664-8D5F-DB3525765DCD@vllmrt.net
Support of CHECK OPTION for updatable views has been added in 9.4, but
the documentation of information_schema never got the call even if the
information displayed is correct.
Author: Gilles Darold
Discussion: https://postgr.es/m/75d07704-6c74-4f26-656a-10045c01a17e@darold.net
Backpatch-through: 9.4
An upcoming HEAD-only patch will standardize the terminology around
ItemIdData variables/line pointers, ending the practice of referring to
them as "item pointers". Make the "Database Page Layout" docs
consistent with the new policy. The term "item identifier" is already
used in the same section, so stick with that.
Discussion: https://postgr.es/m/CAH2-Wz=c=MZQjUzde3o9+2PLAPuHTpVZPPdYxN=E4ndQ2--8ew@mail.gmail.com
Backpatch: All supported branches.
Previously it's documented that use of replication functions is
restricted to superusers. This is true for the functions which
use replication origin, but not for pg_logicl_emit_message() and
functions which use replication slot. For example, not only
superusers but also users with REPLICATION privilege is allowed
to use the functions for replication slot. This commit fixes
the documentation for the privileges required for those replication
functions.
Back-patch to 9.4 (all supported versions).
Author: Matsumura Ryo
Discussion: https://postgr.es/m/03040DFF97E6E54E88D3BFEE5F5480F74ABA6E16@G01JPEXMBYT04
This commit adds the description that "non-exclusive" pg_start_backup
and pg_stop_backup can be executed even during recovery. Previously
it was wrongly documented that those functions are not allowed to be
executed during recovery.
Back-patch to 9.6 where non-exclusive backup API was added.
Discussion: https://postgr.es/m/CAHGQGwEuAYrEX7Yhmf2MCrTK81HDkkg-JqsOUh8zw6+zYC5zzw@mail.gmail.com
A confusion which comes a lot from users is that it is necessary to
issue a checkpoint on a freshly-promoted standby so as its control file
has up-to-date timeline information which is used by pg_rewind to
validate the operation. Let's document that properly. This is
back-patched down to 9.5 where pg_rewind has been introduced.
Author: Michael Paquier
Reviewed-by: Magnus Hagander
Discussion: https://postgr.es/m/CABUevEz5bpvbwVsYCaSMV80CBZ5-82nkMzbb+Bu=h1m=rLdn=g@mail.gmail.com
Backpatch-through: 9.5
Previously we were using the SQL:2003 definition, which doesn't allow
this, but that creates a serious dump/restore gotcha: there is no
setting of xmloption that will allow all valid XML data. Hence,
switch to the 2006 definition.
Since libxml doesn't accept <!DOCTYPE> directives in the mode we
use for CONTENT parsing, the implementation is to detect <!DOCTYPE>
in the input and switch to DOCUMENT parsing mode. This should not
cost much, because <!DOCTYPE> should be close to the front of the
input if it's there at all. It's possible that this causes the
error messages for malformed input to be slightly different than
they were before, if said input includes <!DOCTYPE>; but that does
not seem like a big problem.
In passing, buy back a few cycles in parsing of large XML documents
by not doing strlen() of the whole input in parse_xml_decl().
Back-patch because dump/restore failures are not nice. This change
shouldn't break any cases that worked before, so it seems safe to
back-patch.
Chapman Flack (revised a bit by me)
Discussion: https://postgr.es/m/CAN-V+g-6JqUQEQZ55Q3toXEN6d5Ez5uvzL4VR+8KtvJKj31taw@mail.gmail.com
1. The PARTITION OF clause of CREATE FOREIGN TABLE was not explained in
the CREATE FOREIGN TABLE reference page. Add it.
(Postgres 10 onwards)
2. The limitation that tuple routing cannot target partitions that are
foreign tables was not documented clearly enough. Improve wording.
(Postgres 10 onwards)
3. The UPDATE tuple re-routing concurrency behavior was explained in
the DDL chapter, which doesn't seem the right place. Move it to the
UPDATE reference page instead. (Postgres 11 onwards).
Authors: Amit Langote, David Rowley.
Reviewed-by: Etsuro Fujita.
Reported-by: Derek Hans
Discussion: https://postgr.es/m/CAGrP7a3Xc1Qy_B2WJcgAD8uQTS_NDcJn06O5mtS_Ne1nYhBsyw@mail.gmail.com
