Presently, restore_command uses a different code path than
archive_cleanup_command and recovery_end_command. These code paths
are similar and can be easily combined, as long as it is possible to
identify if a command should:
- Issue a FATAL on signal.
- Exit immediately on SIGTERM.
While on it, this removes src/common/archive.c and its associated
header. Since the introduction of c96de2c, BuildRestoreCommand() has
become a simple wrapper of replace_percent_placeholders() able to call
make_native_path(). This simplifies shell_restore.c as long as
RestoreArchivedFile() includes a call to make_native_path().
Author: Nathan Bossart
Reviewed-by: Andres Freund, Michael Paquier
Discussion: https://postgr.es/m/20221227192449.GA3672473@nathanxps13
There are a number of places where a shell command is constructed with
percent-placeholders (like %x). It's cumbersome to have to open-code
this several times. This factors out this logic into a separate
function. This also allows us to ensure consistency for and document
some subtle behaviors, such as what to do with unrecognized
placeholders.
The unified handling is now that incorrect and unknown placeholders
are an error, where previously in most cases they were skipped or
ignored. This affects the following settings:
- archive_cleanup_command
- archive_command
- recovery_end_command
- restore_command
- ssl_passphrase_command
The following settings are part of this refactoring but already had
stricter error handling and should be unchanged in their behavior:
- basebackup_to_shell.command
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5238bbed-0b01-83a6-d4b2-7eb0562a054e%40enterprisedb.com
VACUUM normally ends by running vac_update_datfrozenxid(), which
requires a scan of pg_class. Therefore, if one attempts to vacuum a
database one table at a time --- as vacuumdb has done since v12 ---
we will spend O(N^2) time in vac_update_datfrozenxid(). That causes
serious performance problems in databases with tens of thousands of
tables, and indeed the effect is measurable with only a few hundred.
To add insult to injury, only one process can run
vac_update_datfrozenxid at the same time per DB, so this behavior
largely defeats vacuumdb's -j option.
Hence, invent options SKIP_DATABASE_STATS and ONLY_DATABASE_STATS
to allow applications to postpone vac_update_datfrozenxid() until the
end of a series of VACUUM requests, and teach vacuumdb to use them.
Per bug #17717 from Gunnar L. Sadly, this answer doesn't seem
like something we'd consider back-patching, so the performance
problem will remain in v12-v15.
Tom Lane and Nathan Bossart
Discussion: https://postgr.es/m/17717-6c50eb1c7d23a886@postgresql.org
Add support for hexadecimal, octal, and binary integer literals:
0x42F
0o273
0b100101
per SQL:202x draft.
This adds support in the lexer as well as in the integer type input
functions.
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/b239564c-cad0-b23e-c57e-166d883cb97d@enterprisedb.com
This substantially speeds up building for windows, due to the vast amount of
headers included via windows.h. A cross build from linux targetting mingw goes
from
994.11user 136.43system 0:31.58elapsed 3579%CPU
to
422.41user 89.05system 0:14.35elapsed 3562%CPU
The wins on windows are similar-ish (but I don't have a system at hand just
now for actual numbers). Targetting other operating systems the wins are far
smaller (tested linux, macOS, FreeBSD).
For now precompiled headers are disabled by default, it's not clear how well
they work on all platforms. E.g. on FreeBSD gcc doesn't seem to have working
support, but clang does.
When doing a full build precompiled headers are only beneficial for targets
with multiple .c files, as meson builds a separate precompiled header for each
target (so that different compilation options take effect). This commit
therefore only changes target with at least two .c files to use precompiled
headers.
Because this commit adds b_pch=false to the default_options new build
directories will have precompiled headers disabled by default, however
existing build directories will continue use the default value of b_pch, which
is true.
Note that using precompiled headers with ccache requires setting
CCACHE_SLOPPINESS=pch_defines,time_macros to get hits.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CA+hUKG+50eOUbN++ocDc0Qnp9Pvmou23DSXu=ZA6fepOcftKqA@mail.gmail.com
Discussion: https://postgr.es/m/c5736f70-bb6d-8d25-e35c-e3d886e4e905@enterprisedb.com
Discussion: https://postgr.es/m/20190826054000.GE7005%40paquier.xyz
When using precompiled headers, we cannot pre-define macros for the system
headers from within .c files, as headers are already processed before
the #define in the C file is reached. But we can pre-define using
-DFD_SETSIZE, as long as that's also used when building the precompiled header.
A few files #define FD_SETSIZE 1024 on windows, as the default is only 64. I
am hesitant to change FD_SETSIZE globally on windows, due to
src/backend/port/win32/socket.c using it to size on-stack arrays. Instead add
-DFD_SETSIZE=1024 when building the specific targets needing it.
We likely should move away from using select() in those places, but that's a
larger change.
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20221005190829.lda7ttalh4mzrvf4@awork3.anarazel.de
Discussion: https://postgr.es/m/CA+hUKG+50eOUbN++ocDc0Qnp9Pvmou23DSXu=ZA6fepOcftKqA@mail.gmail.com
Discussion: https://postgr.es/m/20190826054000.GE7005%40paquier.xyz
There are still some alignment-related failures in the buildfarm,
which might or might not be able to be fixed quickly, but I've also
just realized that it increased the size of many WAL records by 4 bytes
because a block reference contains a RelFileLocator. The effect of that
hasn't been studied or discussed, so revert for now.
RelFileNumbers are now assigned using a separate counter, instead of
being assigned from the OID counter. This counter never wraps around:
if all 2^56 possible RelFileNumbers are used, an internal error
occurs. As the cluster is limited to 2^64 total bytes of WAL, this
limitation should not cause a problem in practice.
If the counter were 64 bits wide rather than 56 bits wide, we would
need to increase the width of the BufferTag, which might adversely
impact buffer lookup performance. Also, this lets us use bigint for
pg_class.relfilenode and other places where these values are exposed
at the SQL level without worrying about overflow.
This should remove the need to keep "tombstone" files around until
the next checkpoint when relations are removed. We do that to keep
RelFileNumbers from being recycled, but now that won't happen
anyway. However, this patch doesn't actually change anything in
this area; it just makes it possible for a future patch to do so.
Dilip Kumar, based on an idea from Andres Freund, who also reviewed
some earlier versions of the patch. Further review and some
wordsmithing by me. Also reviewed at various points by Ashutosh
Sharma, Vignesh C, Amul Sul, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in optimizer, parser,
utility, libpq, and "commands" code, as well as in remaining library
code. Do the same for all code related to frontend programs (with the
exception of pg_dump/pg_dumpall related code).
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will handle
ecpg and pg_dump/pg_dumpall.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
More than twenty years ago (79fcde48b), we hacked the postmaster
to avoid a core-dump on systems that didn't support fflush(NULL).
We've mostly, though not completely, hewed to that rule ever since.
But such systems are surely gone in the wild, so in the spirit of
cleaning out no-longer-needed portability hacks let's get rid of
multiple per-file fflush() calls in favor of using fflush(NULL).
Also, we were fairly inconsistent about whether to fflush() before
popen() and system() calls. While we've received no bug reports
about that, it seems likely that at least some of these call sites
are at risk of odd behavior, such as error messages appearing in
an unexpected order. Rather than expend a lot of brain cells
figuring out which places are at hazard, let's just establish a
uniform coding rule that we should fflush(NULL) before these calls.
A no-op fflush() is surely of trivial cost compared to launching
a sub-process via a shell; while if it's not a no-op then we likely
need it.
Discussion: https://postgr.es/m/2923412.1661722825@sss.pgh.pa.us
While waiting for slots to become available in wait_on_slots() in
parallel_slot.c, the cancellation always relied on the first connection
in the set to do the job. This could cause problems when this slot's
socket is gone as PQgetCancel() would return NULL in this case. Rather
than always using the first connection, this changes the logic to use
the first valid connection for the cancellation.
Author: Ranier Vilela
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/CAEudQAokk1h_pUwGXsYS4oVOuf35s1O2o3TXGHpV8=AWikvgHA@mail.gmail.com
Backpatch-through: 14
The setting controls tha maximum length of the header line in expanded
format output. Possible settings are full, column, page, or an integer.
the default is full, the current behaviour, and in this case the header
line is the length of the widest line of output. column causes the
header to be truncated to the width of the first column, page causes it
to be truncated to the width of the terminal page, and an integer causes
it to be truncated to that value. If the full value is less than the
page or integer value no truncation occurs. If given without an argument
this option prints its current setting.
Platon Pronko, somewhat modified by me.
Discussion: https://postgr.es/m/f03d38a3-db96-a56e-d1bc-dbbc80bbde4d@gmail.com
psql, pg_dump, and pg_amcheck share code to process object name
patterns like 'foo*.bar*' to match all tables with names starting in
'bar' that are in schemas starting with 'foo'. Before v14, any number
of extra name parts were silently ignored, so a command line '\d
foo.bar.baz.bletch.quux' was interpreted as '\d bletch.quux'. In v14,
as a result of commit 2c8726c4b0, we
instead treated this as a request for table quux in a schema named
'foo.bar.baz.bletch'. That caused problems for people like Justin
Pryzby who were accustomed to copying strings of the form
db.schema.table from messages generated by PostgreSQL itself and using
them as arguments to \d.
Accordingly, revise things so that if an object name pattern contains
more parts than we're expecting, we throw an error, unless there's
exactly one extra part and it matches the current database name.
That way, thisdb.myschema.mytable is accepted as meaning just
myschema.mytable, but otherdb.myschema.mytable is an error, and so
is some.random.garbage.myschema.mytable.
Mark Dilger, per report from Justin Pryzby and discussion among
various people.
Discussion: https://www.postgresql.org/message-id/20211013165426.GD27491%40telsasoft.com
Get rid of the separate "FATAL" log level, as it was applied
so inconsistently as to be meaningless. This mostly involves
s/pg_log_fatal/pg_log_error/g.
Create a macro pg_fatal() to handle the common use-case of
pg_log_error() immediately followed by exit(1). Various
modules had already invented either this or equivalent macros;
standardize on pg_fatal() and apply it where possible.
Invent the ability to add "detail" and "hint" messages to a
frontend message, much as we have long had in the backend.
Except where rewording was needed to convert existing coding
to detail/hint style, I have (mostly) resisted the temptation
to change existing message wording.
Patch by me. Design and patch reviewed at various stages by
Robert Haas, Kyotaro Horiguchi, Peter Eisentraut and
Daniel Gustafsson.
Discussion: https://postgr.es/m/1363732.1636496441@sss.pgh.pa.us
Plain \dconfig is basically equivalent to SHOW except that you can
give it a pattern with wildcards, either to match multiple GUCs or
because you don't exactly remember the name you want.
\dconfig+ adds type, context, and access-privilege information,
mainly because every other kind of object privilege has a psql command
to show it, so GUC privileges should too. (A form of this command was
in some versions of the patch series leading up to commit a0ffa885e.
We pulled it out then because of doubts that the design and code were
up to snuff, but I think subsequent work has resolved that.)
In passing, fix incorrect completion of GUC names in GRANT/REVOKE
ON PARAMETER: a0ffa885e neglected to use the VERBATIM form of
COMPLETE_WITH_QUERY, so it misbehaved for custom (qualified) GUC
names.
Mark Dilger and Tom Lane
Discussion: https://postgr.es/m/3118455.1649267333@sss.pgh.pa.us
When serialization or deadlock errors are reported by backend, allow
to retry and continue the benchmarking. For this purpose new options
"--max-tries", "--failures-detailed" and "--verbose-errors" are added.
Transactions with serialization errors or deadlock errors will be
repeated after rollbacks until they complete successfully or reach the
maximum number of tries (specified by the --max-tries option), or the
maximum time of tries (specified by the --latency-limit option).
These options can be specified at the same time. It is not possible to
use an unlimited number of tries (--max-tries=0) without the
--latency-limit option or the --time option. By default the option
--max-tries is set to 1, which means transactions with
serialization/deadlock errors are not retried. If the last try fails,
this transaction will be reported as failed, and the client variables
will be set as they were before the first run of this transaction.
Statistics on retries and failures are printed in the progress,
transaction / aggregation logs and in the end with other results (all
and for each script). Also retries and failures are printed
per-command with average latency by using option
(--report-per-command, -r).
Option --failures-detailed prints group failures by basic types
(serialization failures / deadlock failures).
Option --verbose-errors prints distinct reports on errors and failures
(errors without retrying) by type with detailed information like which
limit for retries was violated and how far it was exceeded for the
serialization/deadlock failures.
Patch originally written by Marina Polyakova then Yugo Nagata
inherited the discussion and heavily modified the patch to make it
commitable.
Authors: Yugo Nagata, Marina Polyakova
Reviewed-by: Fabien Coelho, Tatsuo Ishii, Alvaro Herrera, Kevin Grittner, Andres Freund, Arthur Zakirov, Alexander Korotkov, Teodor Sigaev, Ildus Kurbangaliev
Discussion: https://postgr.es/m/flat/72a0d590d6ba06f242d75c2e641820ec%40postgrespro.ru
Most of these are cases where we could call memcpy() or other libc
functions with a NULL pointer and a zero count, which is forbidden
by POSIX even though every production version of libc allows it.
We've fixed such things before in a piecemeal way, but apparently
never made an effort to try to get them all. I don't claim that
this patch does so either, but it gets every failure I observe in
check-world, using clang 12.0.1 on current RHEL8.
numeric.c has a different issue that the sanitizer doesn't like:
"ln(-1.0)" will compute log10(0) and then try to assign the
resulting -Inf to an integer variable. We don't actually use the
result in such a case, so there's no live bug.
Back-patch to all supported branches, with the idea that we might
start running a buildfarm member that tests this case. This includes
back-patching c1132aae3 (Check the size in COPY_POINTER_FIELD),
which previously silenced some of these issues in copyfuncs.c.
Discussion: https://postgr.es/m/CALNJ-vT9r0DSsAOw9OXVJFxLENoVS_68kJ5x0p44atoYH+H4dg@mail.gmail.com
After this, the PostgreSQL lexers no longer accept numeric literals
with trailing non-digits, such as 123abc, which would be scanned as
two tokens: 123 and abc. This is undocumented and surprising, and it
might also interfere with some extended numeric literal syntax being
contemplated for the future.
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/b239564c-cad0-b23e-c57e-166d883cb97d@enterprisedb.com
It seems highly unlikely that gettext() can be relied on to be
async-signal-safe. psql used to understand that, but someone got
it wrong long ago in the src/bin/scripts/ version of handle_sigint,
and then the bad idea was perpetuated when those two versions were
unified into src/fe_utils/cancel.c.
I'm unsure why there have not been field complaints about this
... maybe gettext() is signal-safe once it's translated at least
one message? But we have no business assuming any such thing.
In cancel.c (v13 and up), I preserved our ability to localize
"Cancel request sent" messages by invoking gettext() before
the signal handler is set up. In earlier branches I just made
src/bin/scripts/ not localize those messages, as psql did then.
(Just for extra unsafety, the src/bin/scripts/ version was
invoking fprintf() from a signal handler. Sigh.)
Noted while fixing signal-safety issues in PQcancel() itself.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/2937814.1641960929@sss.pgh.pa.us
Throw away most of the existing logic for this, as it was very
inefficient thanks to expensive sub-selects executed to collect
ACL data that we very possibly would have no interest in dumping.
Reduce the ACL handling in the initial per-object-type queries
to be just collection of the catalog ACL fields, as it was
originally. Fetch pg_init_privs data separately in a single
scan of that catalog, and do the merging calculations on the
client side. Remove the separate code path used for pre-9.6
source servers; there is no good reason to treat them differently
from newer servers that happen to have empty pg_init_privs.
Discussion: https://postgr.es/m/2273648.1634764485@sss.pgh.pa.us
Discussion: https://postgr.es/m/7d7eb6128f40401d81b3b7a898b6b4de@W2012-02.nidsa.loc
psql's lexer has historically deleted dash-dash (single-line) comments
from what's collected and sent to the server. This is inconsistent
with what it does for slash-star comments, and people have complained
before that they wish such comments would be captured in the server log.
Undoing the decision completely seems like too big a behavioral change,
however. In particular, comments on lines preceding the start of a
query are generally not thought of as being part of that query.
What we can do to improve the situation is to capture comments that
are clearly *within* a query, that is after the first non-whitespace,
non-comment token but before the query's ending semicolon or backslash
command. This is a nearly trivial code change, and it affects only a
few regression test results.
(It is tempting to try to apply the same rule to slash-star comments.
But it's hard to see how to do that without getting strange history
behavior for comments that cross lines, especially if the user then
starts a new query on the same line as the star-slash. In view of
the lack of complaints, let's leave that case alone.)
Discussion: https://postgr.es/m/CAJcOf-cAdMVr7azeYR7nWKsNp7qhORzc84rV6d7m7knG5Hrtsw@mail.gmail.com
The unicode characters, while in comments and not code, caused MSVC
to emit compiler warning C4819:
The file contains a character that cannot be represented in the
current code page (number). Save the file in Unicode format to
prevent data loss.
Fix by replacing the characters in print.c with descriptive comments
containing the codepoints and symbol names, and remove the character
in brin_bloom.c which was a footnote reference copied from the paper
citation.
Per report from hamerkop in the buildfarm.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/340E4118-0D0C-4E85-8141-8C40EB22DA3A@yesql.se
strtoint(), via strtol(), would skip leading whitespaces but the same
rule was not applied for trailing whitespaces, leading to an
inconsistent behavior. Some tests are changed to cover more this area.
Author: Michael Paquier
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/YP5Pv0d13Ct+03ve@paquier.xyz
Most of the integer options for command-line binaries now make use of a
single routine able to do the job, fixing issues with the detection of
sloppy values caused for example by the use of atoi(), that fails on
strings beginning with numerical characters with junk trailing
characters.
This commit cuts down the number of strings requiring translation by 26
per my count, switching the code to have two error types for invalid and
out-of-range values instead.
Much more could be done here, with float or even int64 options, but
int32 was the most appealing case as it is possible to rely on strtol()
to do the job reliably. Note that there are some exceptions for now,
like pg_ctl or pg_upgrade that use their own logging logic. A couple of
negative TAP tests required some adjustments for the new errors
generated.
pg_dump and pg_restore tracked the maximum number of parallel jobs
within the option parsing. The code is refactored a bit to track that
in the code dedicated to parallelism instead.
Author: Kyotaro Horiguchi, Michael Paquier
Reviewed-by: David Rowley, Álvaro Herrera
Discussion: https://postgr.es/m/CALj2ACXqdG9WhqVoJ9zYf-iZt7sgK7Szv5USs=he6NnWQ2ofTA@mail.gmail.com
An incorrectly-encoded multibyte character near the end of a string
could cause various processing loops to run past the string's
terminating NUL, with results ranging from no detectable issue to
a program crash, depending on what happens to be in the following
memory.
This isn't an issue in the server, because we take care to verify
the encoding of strings before doing any interesting processing
on them. However, that lack of care leaked into client-side code
which shouldn't assume that anyone has validated the encoding of
its input.
Although this is certainly a bug worth fixing, the PG security team
elected not to regard it as a security issue, primarily because
any untrusted text should be sanitized by PQescapeLiteral or
the like before being incorporated into a SQL or psql command.
(If an app fails to do so, the same technique can be used to
cause SQL injection, with probably much more dire consequences
than a mere client-program crash.) Those functions were already
made proof against this class of problem, cf CVE-2006-2313.
To fix, invent PQmblenBounded() which is like PQmblen() except it
won't return more than the number of bytes remaining in the string.
In HEAD we can make this a new libpq function, as PQmblen() is.
It seems imprudent to change libpq's API in stable branches though,
so in the back branches define PQmblenBounded as a macro in the files
that need it. (Note that just changing PQmblen's behavior would not
be a good idea; notably, it would completely break the escaping
functions' defense against this exact problem. So we just want a
version for those callers that don't have any better way of handling
this issue.)
Per private report from houjingyi. Back-patch to all supported branches.
When dealing with overloaded function or operator names, having
to look through a long list of matches is tedious. Let's extend
these commands to allow specification of (input) argument types
to let such results be trimmed down. Each additional argument
is treated the same as the pattern argument of \dT and matched
against the appropriate argument's type name.
While at it, fix \dT (and these new options) to recognize the
usual notation of "foo[]" for "the array type over foo", and
to handle the special abbreviations allowed by the backend
grammar, such as "int" for "integer".
Greg Sabino Mullane, revised rather significantly by me
Discussion: https://postgr.es/m/CAKAnmmLF9Hhu02N+s7uAyLc5J1xZReg72HQUoiKhNiJV3_jACQ@mail.gmail.com
This adds support for writing CREATE FUNCTION and CREATE PROCEDURE
statements for language SQL with a function body that conforms to the
SQL standard and is portable to other implementations.
Instead of the PostgreSQL-specific AS $$ string literal $$ syntax,
this allows writing out the SQL statements making up the body
unquoted, either as a single statement:
CREATE FUNCTION add(a integer, b integer) RETURNS integer
LANGUAGE SQL
RETURN a + b;
or as a block
CREATE PROCEDURE insert_data(a integer, b integer)
LANGUAGE SQL
BEGIN ATOMIC
INSERT INTO tbl VALUES (a);
INSERT INTO tbl VALUES (b);
END;
The function body is parsed at function definition time and stored as
expression nodes in a new pg_proc column prosqlbody. So at run time,
no further parsing is required.
However, this form does not support polymorphic arguments, because
there is no more parse analysis done at call time.
Dependencies between the function and the objects it uses are fully
tracked.
A new RETURN statement is introduced. This can only be used inside
function bodies. Internally, it is treated much like a SELECT
statement.
psql needs some new intelligence to keep track of function body
boundaries so that it doesn't send off statements when it sees
semicolons that are inside a function body.
Tested-by: Jaime Casanova <jcasanov@systemguards.com.ec>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/1c11f1eb-f00c-43b7-799d-2d44132c02d7@2ndquadrant.com
We were never doing clearerr() on the output stream, which results in a
message being printed after each result once an EOF is seen:
could not print result table: Success
This message was added by commit b03436994b (in the pg13 era); before
that, the error indicator would never be examined. So backpatch only
that far back, even though the actual bug (to wit: the fact that the
error indicator is never cleared) is older.
Create a wrapper object, ParallelSlotArray, to encapsulate the
number of slots and the slot array itself, plus some other relevant
bits of information. This reduces the number of parameters we have
to pass around all over the place.
Allow for a ParallelSlotArray to contain slots connected to
different databases within a single cluster. The current clients
of this mechanism don't need this, but it is expected to be used
by future patches.
Defer connecting to databases until we actually need the connection
for something. This is a slight behavior change for vacuumdb and
reindexdb. If you specify a number of jobs that is larger than the
number of objects, the extra connections will now not be used.
But, on the other hand, if you specify a number of jobs that is
so large that it's going to fail, the failure would previously have
happened before any operations were actually started, and now it
won't.
Mark Dilger, reviewed by me.
Discussion: http://postgr.es/m/12ED3DA8-25F0-4B68-937D-D907CFBF08E7@enterprisedb.com
Discussion: http://postgr.es/m/BA592F2D-F928-46FF-9516-2B827F067F57@enterprisedb.com
The parallel slots infrastructure (which implements client-side
multiplexing of server connections doing similar things, not
threading or multiple processes or anything like that) are moved from
src/bin/scripts/scripts_parallel.c to src/fe_utils/parallel_slot.c.
The functions consumeQueryResult() and processQueryResult() which were
previously part of src/bin/scripts/common.c are now moved into that
file as well, becoming static helper functions. This might need to be
changed in the future, but currently they're not used for anything
else.
Some other functions from src/bin/scripts/common.c are moved to to
src/fe_utils and are split up among several files. connectDatabase(),
connectMaintenanceDatabase(), and disconnectDatabase() are moved to
connect_utils.c. executeQuery(), executeCommand(), and
executeMaintenanceCommand() are move to query_utils.c.
handle_help_version_opts() is moved to option_utils.c.
Mark Dilger, reviewed by me. The larger patch series of which this is
a part has also had review from Peter Geoghegan, Andres Freund, Álvaro
Herrera, Michael Paquier, and Amul Sul, but I don't know whether any
of them have reviewed this bit specifically.
Discussion: http://postgr.es/m/12ED3DA8-25F0-4B68-937D-D907CFBF08E7@enterprisedb.com
Discussion: http://postgr.es/m/5F743835-3399-419C-8324-2D424237E999@enterprisedb.com
Discussion: http://postgr.es/m/70655DF3-33CE-4527-9A4D-DDEB582B6BA0@enterprisedb.com
The logic for converting the shell-glob-like syntax supported by
utilities like psql and pg_dump to regular expression is
extracted into a new function patternToSQLRegex. The existing
function processSQLNamePattern now uses this function as a
subroutine.
patternToSQLRegex is a little more general than what is required
by processSQLNamePattern. That function is only interested in
patterns that can have up to 2 parts, a schema and a relation;
but patternToSQLRegex can limit the maximum number of parts to
between 1 and 3, so that patterns can look like either
"database.schema.relation", "schema.relation", or "relation"
depending on how it's invoked and what the user specifies.
processSQLNamePattern only passes two buffers, so works exactly
the same as before, always interpreting the pattern as either
a "schema.relation" pattern or a "relation" pattern. But,
future callers can use this function in other ways.
Mark Dilger, reviewed by me. The larger patch series of which this is
a part has also had review from Peter Geoghegan, Andres Freund, Álvaro
Herrera, Michael Paquier, and Amul Sul, but I don't know whether
any of them have reviewed this bit specifically.
Discussion: http://postgr.es/m/12ED3DA8-25F0-4B68-937D-D907CFBF08E7@enterprisedb.com
Discussion: http://postgr.es/m/5F743835-3399-419C-8324-2D424237E999@enterprisedb.com
Discussion: http://postgr.es/m/70655DF3-33CE-4527-9A4D-DDEB582B6BA0@enterprisedb.com
On the same reasoning as in commit 36b931214, forbid using custom
oid_symbol macros in pg_type as well as pg_proc, so that we always
rely on the predictable macro names generated by genbki.pl.
We do continue to grant grandfather status to the names CASHOID and
LSNOID, although those are now considered deprecated aliases for the
preferred names MONEYOID and PG_LSNOID. This is because there's
likely to be client-side code using the old names, and this bout of
neatnik-ism doesn't quite seem worth breaking client code.
There might be a case for grandfathering EVTTRIGGEROID, too, since
externally-maintained PLs may reference that symbol. But renaming
such references to EVENT_TRIGGEROID doesn't seem like a particularly
heavy lift --- we make far more significant backend API changes in
every major release. For now I didn't add that, but we could
reconsider if there's pushback.
The other names changed here seem pretty unlikely to have any outside
uses. Again, we could add alias macros if there are complaints, but
for now I didn't.
As before, no need for a catversion bump.
John Naylor
Discussion: https://postgr.es/m/CAFBsxsHpCbjfoddNGpnnnY5pHwckWfiYkMYSF74PmP1su0+ZOw@mail.gmail.com
Existing code used various inconsistent ways to printf struct stat's
st_size member. The type of that is off_t, which is in most cases a
signed 64-bit integer, so use the long long int format for it.
Any libpq client can use the header. Clients include backend components
postgres_fdw, dblink, and logical replication apply worker. Back-patch
to v10, because another fix needs this. In released branches, just copy
the header and keep the original.
Commit 54cd4f045 added some kluges to work around an old glibc bug,
namely that %.*s could misbehave if glibc thought any characters in
the supplied string were incorrectly encoded. Now that we use our
own snprintf.c implementation, we need not worry about that bug (even
if it still exists in the wild). Revert a couple of particularly
ugly hacks, and remove or improve assorted comments.
Note that there can still be encoding-related hazards here: blindly
clipping at a fixed length risks producing wrongly-encoded output
if the clip splits a multibyte character. However, code that's
doing correct multibyte-aware clipping doesn't really need a comment
about that, while code that isn't needs an explanation why not,
rather than a red-herring comment about an obsolete bug.
Discussion: https://postgr.es/m/279428.1593373684@sss.pgh.pa.us
fe_archive.c was compiled only for the frontend in src/common/, but as
it will never share anything with the backend, it makes most sense to
move this file to src/fe_utils/.
Reported-by: Peter Eisentraut
Discussion: https://postgr.es/m/e9766d71-8655-ac86-bdf6-77e0e7169977@2ndquadrant.com
Backpatch-through: 13
As it stands, this flag is only set when we've successfully sent a
cancel request, not if we get SIGINT and then fail to send a cancel.
However, for almost all callers, that's the Wrong Thing: we'd prefer
to abort processing after control-C even if no cancel could be sent.
As an example, since commit 1d468b9ad "pgbench -i" fails to give up
sending COPY data even after control-C, if the postmaster has been
stopped, which is clearly not what the code intends and not what anyone
would want. (The fact that it keeps going at all is the fault of a
separate bug in libpq, but not letting CancelRequested become set is
clearly not what we want here.)
The sole exception, as far as I can find, is that scripts_parallel.c's
ParallelSlotsGetIdle tries to consume a query result after issuing a
cancel, which of course might not terminate quickly if no cancel
happened. But that behavior was poorly thought out too. No user of
ParallelSlotsGetIdle tries to continue processing after a cancel,
so there is really no point in trying to clear the connection's state.
Moreover this has the same defect as for other users of cancel.c,
that if the cancel request fails for some reason then we end up with
control-C being completely ignored. (On top of that, select_loop failed
to distinguish clearly between SIGINT and other reasons for select(2)
failing, which means that it's possible that the existing code would
think that a cancel has been sent when it hasn't.)
Hence, redefine CancelRequested as simply meaning that SIGINT was
received. We could add a second flag with the other meaning, but
in the absence of any compelling argument why such a flag is needed,
I think it would just offer an opportunity for future callers to
get it wrong. Also remove the consumeQueryResult call in
ParallelSlotsGetIdle's failure exit. In passing, simplify the
API of select_loop.
It would now be possible to re-unify psql's cancel_pressed with
CancelRequested, partly undoing 5d43c3c54. But I'm not really
convinced that that's worth the trouble, so I left psql alone,
other than fixing a misleading comment.
This code is new in v13 (cf a4fd3aa71), so no need for back-patch.
Per investigation of a complaint from Andres Freund.
Discussion: https://postgr.es/m/20200603201242.ofvm4jztpqytwfye@alap3.anarazel.de
Similar to xid, but 64 bits wide. This new type is suitable for use in
various system views and administration functions.
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Takao Fujii <btfujiitkp@oss.nttdata.com>
Reviewed-by: Yoshikazu Imai <imai.yoshikazu@fujitsu.com>
Reviewed-by: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://postgr.es/m/20190725000636.666m5mad25wfbrri%40alap3.anarazel.de
Commit caba97a9d9 changed pg_basebackup -F plain -R so that
it overwrote postgresql.auto.conf in the backup, with new connection
setting. This could cause the existing postgresql.auto.conf settings
in the server to get lost unexpectedly. This is a bug.
This commit fixes the bug by making pg_basebackup -F plain -R
append the connection setting into postgresql.auto.conf in the backup.
Author: Fujii Masao
Reviewed-by: Sergei Kornilov
Discussion: https://postgr.es/m/250dcf2a-94e7-c05e-824a-73cfb38a48a4@oss.nttdata.com
Previously, the core scanner's yy_transition[] array had 37045 elements.
Since that number is larger than INT16_MAX, Flex generated the array to
contain 32-bit integers. By reimplementing some of the bulkier scanner
rules, this patch reduces the array to 20495 elements. The much smaller
total length, combined with the consequent use of 16-bit integers for
the array elements reduces the binary size by over 200kB. This was
accomplished in two ways:
1. Consolidate handling of quote continuations into a new start condition,
rather than duplicating that logic for five different string types.
2. Treat Unicode strings and identifiers followed by a UESCAPE sequence
as three separate tokens, rather than one. The logic to de-escape
Unicode strings is moved to the filter code in parser.c, which already
had the ability to provide special processing for token sequences.
While we could have implemented the conversion in the grammar, that
approach was rejected for performance and maintainability reasons.
Performance in microbenchmarks of raw parsing seems equal or slightly
faster in most cases, and it's reasonable to expect that in real-world
usage (with more competition for the CPU cache) there will be a larger
win. The exception is UESCAPE sequences; lexing those is about 10%
slower, primarily because the scanner now has to be called three times
rather than one. This seems acceptable since that feature is very
rarely used.
The psql and epcg lexers are likewise modified, primarily because we
want to keep them all in sync. Since those lexers don't use the
space-hogging -CF option, the space savings is much less, but it's
still good for perhaps 10kB apiece.
While at it, merge the ecpg lexer's handling of C-style comments used
in SQL and in C. Those have different rules regarding nested comments,
but since we already have the ability to keep track of the previous
start condition, we can use that to handle both cases within a single
start condition. This matches the core scanner more closely.
John Naylor
Discussion: https://postgr.es/m/CACPNZCvaoa3EgVWm5yZhcSTX6RAtaLgniCPcBVOCwm8h3xpWkw@mail.gmail.com
The refactoring done in a4fd3aa for query cancellation has messed up
with the logic in psql by mixing CancelRequested and cancel_pressed,
breaking for example \watch. The former would be switched to true if a
cancellation request has been attempted and that it actually succeeded,
and the latter tracks if a cancellation attempt has been done.
This commit brings back the code of psql to a state consistent to what
it was before a4fd3aa, without giving up on the refactoring pieces
introduced. It should be actually possible to merge more both flags as
their concepts are close enough, however note that psql's --single-step
mode relies on cancel_pressed to be always set, so this requires more
careful analysis left for later.
While on it, fix the declarations of CancelRequested (in cancel.c) and
cancel_pressed (in psql) to be volatile sig_atomic_t. Previously,
both were declared as booleans, which should be fine on modern
platforms, but the C standard recommends the use of sig_atomic_t for
variables used in signal handlers. Note that since its introduction in
a1792320, CancelRequested declaration was not volatile.
Reported-by: Jeff Janes
Author: Michael Paquier
Discussion: https://postgr.es/m/CAMkU=1zpoUDGKqWKuMWkj7t-bOCaJDx0r=5te_-d0B2HVLABXg@mail.gmail.com
Originally, this code was duplicated in src/bin/psql/ and
src/bin/scripts/, but it can be useful for other frontend applications,
like pgbench. This refactoring offers the possibility to setup a custom
callback which would get called in the signal handler for SIGINT or when
the interruption console events happen on Windows.
Author: Fabien Coelho, with contributions from Michael Paquier
Reviewed-by: Álvaro Herrera, Ibrar Ahmed
Discussion: https://postgr.es/m/alpine.DEB.2.21.1910311939430.27369@lancre
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
When an FK constraint is created, it needs the index on the referenced
table to exist and be valid. When doing parallel pg_restore and the
referenced table was partitioned, this condition can sometimes not be
met, because pg_dump didn't emit sufficient object dependencies to
ensure so; this means that parallel pg_restore would fail in certain
conditions. Fix by having pg_dump make the FK constraint object
dependent on the partition attachment objects for the constraint's
referenced index.
This has been broken since f56f8f8da6, so backpatch to Postgres 12.
Discussion: https://postgr.es/m/20191005224333.GA9738@alvherre.pgsql
When building a list of relations for a parallel processing of a schema
or a database (or just a single-entry list for the non-parallel case
with the database name), the list is allocated and built on-the-fly for
each database processed, leaking after one database-level reindex is
done. This accumulates leaks when processing all databases, and could
become a visible issue with thousands of relations.
This is fixed by introducing a new routine in simple_list.c to free all
the elements in a simple list made of strings or OIDs. The header of
the list may be using a variable declaration or an allocated pointer,
so we don't have a routine to free this part to keep the interface
simple.
Per report from coverity for an issue introduced by 5ab892c, and
valgrind complains about the leak as well. The idea to introduce a new
routine in simple_list.c is from Tom Lane.
Author: Michael Paquier
Reviewed-by: Tom Lane
This changes various places where appendPQExpBuffer was used in places
where it was possible to use appendPQExpBufferStr, and likewise for
appendStringInfo and appendStringInfoString. This is really just a
stylistic improvement, but there are also small performance gains to be
had from doing this.
Discussion: http://postgr.es/m/CAKJS1f9P=M-3ULmPvr8iCno8yvfDViHibJjpriHU8+SXUgeZ=w@mail.gmail.com
The original placement of this module in src/fe_utils/ is ill-considered,
because several src/common/ modules have dependencies on it, meaning that
libpgcommon and libpgfeutils now have mutual dependencies. That makes it
pointless to have distinct libraries at all. The intended design is that
libpgcommon is lower-level than libpgfeutils, so only dependencies from
the latter to the former are acceptable.
We already have the precedent that fe_memutils and a couple of other
modules in src/common/ are frontend-only, so it's not stretching anything
out of whack to treat logging.c as a frontend-only module in src/common/.
To the extent that such modules help provide a common frontend/backend
environment for the rest of common/ to use, it's a reasonable design.
(logging.c does not yet provide an ereport() emulation, but one can
dream.)
Hence, move these files over, and revert basically all of the build-system
changes made by commit cc8d41511. There are no places that need to grow
new dependencies on libpgcommon, further reinforcing the idea that this
is the right solution.
Discussion: https://postgr.es/m/a912ffff-f6e4-778a-c86a-cf5c47a12933@2ndquadrant.com
Prior to v12, if you used a collation-sensitive regex feature in a
pattern handled by processSQLNamePattern() (for instance, \d '\\w+'
in psql), the behavior you got matched the database's default collation.
Since commit 586b98fdf you'd usually get C-collation behavior, because
the catalog "name"-type columns are now marked as COLLATE "C". Add
explicit COLLATE specifications to restore the prior behavior.
(Note for whoever writes the v12 release notes: the need for this shows
that while 586b98fdf preserved pre-v12 behavior of "name" columns for
simple comparison operators, it changed the behavior of regex operators
on those columns. Although this patch fixes it for pattern matches
generated by our own tools, user-written queries will still be affected.
So we'd better mention this issue as a compatibility item.)
Daniel Vérité
Discussion: https://postgr.es/m/701e51f0-0ec0-4e70-a365-1958d66dd8d2@manitou-mail.org
This unifies the various ad hoc logging (message printing, error
printing) systems used throughout the command-line programs.
Features:
- Program name is automatically prefixed.
- Message string does not end with newline. This removes a common
source of inconsistencies and omissions.
- Additionally, a final newline is automatically stripped, simplifying
use of PQerrorMessage() etc., another common source of mistakes.
- I converted error message strings to use %m where possible.
- As a result of the above several points, more translatable message
strings can be shared between different components and between
frontends and backend, without gratuitous punctuation or whitespace
differences.
- There is support for setting a "log level". This is not meant to be
user-facing, but can be used internally to implement debug or
verbose modes.
- Lazy argument evaluation, so no significant overhead if logging at
some level is disabled.
- Some color in the messages, similar to gcc and clang. Set
PG_COLOR=auto to try it out. Some colors are predefined, but can be
customized by setting PG_COLORS.
- Common files (common/, fe_utils/, etc.) can handle logging much more
simply by just using one API without worrying too much about the
context of the calling program, requiring callbacks, or having to
pass "progname" around everywhere.
- Some programs called setvbuf() to make sure that stderr is
unbuffered, even on Windows. But not all programs did that. This
is now done centrally.
Soft goals:
- Reduces vertical space use and visual complexity of error reporting
in the source code.
- Encourages more deliberate classification of messages. For example,
in some cases it wasn't clear without analyzing the surrounding code
whether a message was meant as an error or just an info.
- Concepts and terms are vaguely aligned with popular logging
frameworks such as log4j and Python logging.
This is all just about printing stuff out. Nothing affects program
flow (e.g., fatal exits). The uses are just too varied to do that.
Some existing code had wrappers that do some kind of print-and-exit,
and I adapted those.
I tried to keep the output mostly the same, but there is a lot of
historical baggage to unwind and special cases to consider, and I
might not always have succeeded. One significant change is that
pg_rewind used to write all error messages to stdout. That is now
changed to stderr.
Reviewed-by: Donald Dong <xdong@csumb.edu>
Reviewed-by: Arthur Zakirov <a.zakirov@postgrespro.ru>
Discussion: https://www.postgresql.org/message-id/flat/6a609b43-4f57-7348-6480-bd022f924310@2ndquadrant.com
Partial revert of commit 6260cc550b, "pgbench: add \cset and \gset
commands".
While \gset is widely considered a useful and necessary tool for user-
defined benchmarks, \cset does not have as much value, and its
implementation was considered "not to be up to project standards"
(though I, Álvaro, can't quite understand exactly how). Therefore,
remove \cset.
Author: Fabien Coelho
Discussion: https://postgr.es/m/alpine.DEB.2.21.1903230716030.18811@lancre
Discussion: https://postgr.es/m/201901101900.mv7zduch6sad@alvherre.pgsql
These commands allow assignment of values produced by queries to pgbench
variables, where they can be used by further commands. \gset terminates
a command sequence (just like a bare semicolon); \cset separates
multiple queries in a compound command, like an escaped semicolon (\;).
A prefix can be provided to the \-command and is prepended to the name
of each output column to produce the final variable name.
This feature allows pgbench scripts to react meaningfully to the actual
database contents, allowing more powerful benchmarks to be written.
Authors: Fabien Coelho, Álvaro Herrera
Reviewed-by: Amit Langote <Langote_Amit_f8@lab.ntt.co.jp>
Reviewed-by: Stephen Frost <sfrost@snowman.net>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Tatsuo Ishii <ishii@sraoss.co.jp>
Reviewed-by: Rafia Sabih <rafia.sabih@enterprisedb.com>
Discussion: https://postgr.es/m/alpine.DEB.2.20.1607091005330.3412@sto
Previously, ScanKeywordLookup was passed an array of string pointers.
This had some performance deficiencies: the strings themselves might
be scattered all over the place depending on the compiler (and some
quick checking shows that at least with gcc-on-Linux, they indeed
weren't reliably close together). That led to very cache-unfriendly
behavior as the binary search touched strings in many different pages.
Also, depending on the platform, the string pointers might need to
be adjusted at program start, so that they couldn't be simple constant
data. And the ScanKeyword struct had been designed with an eye to
32-bit machines originally; on 64-bit it requires 16 bytes per
keyword, making it even more cache-unfriendly.
Redesign so that the keyword strings themselves are allocated
consecutively (as part of one big char-string constant), thereby
eliminating the touch-lots-of-unrelated-pages syndrome. And get
rid of the ScanKeyword array in favor of three separate arrays:
uint16 offsets into the keyword array, uint16 token codes, and
uint8 keyword categories. That reduces the overhead per keyword
to 5 bytes instead of 16 (even less in programs that only need
one of the token codes and categories); moreover, the binary search
only touches the offsets array, further reducing its cache footprint.
This also lets us put the token codes somewhere else than the
keyword strings are, which avoids some unpleasant build dependencies.
While we're at it, wrap the data used by ScanKeywordLookup into
a struct that can be treated as an opaque type by most callers.
That doesn't change things much right now, but it will make it
less painful to switch to a hash-based lookup method, as is being
discussed in the mailing list thread.
Most of the change here is associated with adding a generator
script that can build the new data structure from the same
list-of-PG_KEYWORD header representation we used before.
The PG_KEYWORD lists that plpgsql and ecpg used to embed in
their scanner .c files have to be moved into headers, and the
Makefiles have to be taught to invoke the generator script.
This work is also necessary if we're to consider hash-based lookup,
since the generator script is what would be responsible for
constructing a hash table.
Aside from saving a few kilobytes in each program that includes
the keyword table, this seems to speed up raw parsing (flex+bison)
by a few percent. So it's worth doing even as it stands, though
we think we can gain even more with a follow-on patch to switch
to hash-based lookup.
John Naylor, with further hacking by me
Discussion: https://postgr.es/m/CAJVSVGXdFVU2sgym89XPL=Lv1zOS5=EHHQ8XWNzFL=mTXkKMLw@mail.gmail.com
latex_escaped_print() mistranslated \ and failed to provide any translation
for # ^ and ~, all of which would typically lead to LaTeX document syntax
errors. In addition it didn't translate < > and |, which would typically
render as unexpected characters.
To some extent this represents shortcomings in ancient versions of LaTeX,
which if memory serves had no easy way to render these control characters
as ASCII text. But that's been fixed for, um, decades. In any case there
is no value in emitting guaranteed-to-fail output for these characters.
Noted while fooling with test cases added by commit 9a98984f4. Back-patch
the code change to all supported versions.
"\pset format csv", or --csv, selects comma-separated values table format.
This is compliant with RFC 4180, except that we aren't too picky about
whether the record separator is LF or CRLF; also, the user may choose a
field separator other than comma.
This output format is directly compatible with the server's COPY CSV
format, and will also be useful as input to other programs. It's
considerably safer for that purpose than the old recommendation to
use "unaligned" format, since the latter couldn't handle data
containing the field separator character.
Daniel Vérité, reviewed by Fabien Coelho and David Fetter, some
tweaking by me
Discussion: https://postgr.es/m/a8de371e-006f-4f92-ab72-2bbe3ee78f03@manitou-mail.org
The realfail1 and realfail2 backup-prevention rules always returned
token type FCONST, ignoring the possibility that what we've scanned
is more appropriately described as ICONST. I think that at the
time that code was added, it might actually have been safe to not
distinguish; but since we started allowing AS-less aliases in SELECT
target lists, it's definitely legal to have a number immediately
followed by an identifier.
In the SELECT case, it seems there's no visible consequence because
make_const() will change the type back to integer anyway. But I'm
worried that there are other contexts, or will be in future, where
it's more important to get the constant's type right.
Hence, use process_integer_literal to correctly determine which
token type to return.
Arguably this is a bug fix, but given the lack of evidence of
user-visible problems, I'll refrain from back-patching.
Discussion: https://postgr.es/m/21364.1542136808@sss.pgh.pa.us
Make a bunch of basically-cosmetic changes to reduce the diffs between
the flex rules in scan.l, psqlscan.l, and pgc.l. Reorder some code,
adjust a lot of whitespace, sync some comments, make use of flex start
condition scopes to do that.
There are a few non-cosmetic changes in the ECPG lexer:
* Bring over the decimalfail rule (and support function
process_integer_literal) so that ECPG will lex "1..10" into
the same tokens as the backend would. I'm not sure this makes any
visible difference to users, but I'm not sure it doesn't, either.
* <xdc><<EOF>> gets its own rule so as to produce a more on-point
error message.
* Remove duplicate <SQL>{xdstart} rule.
John Naylor, with a few additional changes by me
Discussion: https://postgr.es/m/CAJVSVGWGqY9YBs2EwtRUkbNv=hXkN8yRPOoD1wxE6COgvvrz5g@mail.gmail.com
Commits c6b3c939b (which fixed the precedence of >=, <=, <> operators)
and 865f14a2d (which added support for the standard => notation for
named arguments) created a class of lexer tokens which look like
multi-character operators but which have their own token IDs distinct
from Op. However, longest-match rules meant that following any of
these tokens with another operator character, as in (1<>-1), would
cause them to be incorrectly returned as Op.
The error here isn't immediately obvious, because the parser would
usually still find the correct operator via the Op token, but there
were more subtle problems:
1. If immediately followed by a comment or +-, >= <= <> would be given
the old precedence of Op rather than the correct new precedence;
2. If followed by a comment, != would be returned as Op rather than as
NOT_EQUAL, causing it not to be found at all;
3. If followed by a comment or +-, the => token for named arguments
would be lexed as Op, causing the argument to be mis-parsed as a
simple expression, usually causing an error.
Fix by explicitly checking for the operators in the {operator} code
block in addition to all the existing special cases there.
Backpatch to 9.5 where the problem was introduced.
Analysis and patch by me; review by Tom Lane.
Discussion: https://postgr.es/m/87va851ppl.fsf@news-spur.riddles.org.uk
The lexer's handling of operators contained an O(N^3) hazard when
dealing with long strings of + or - characters; it seems hard to
prevent this case from being O(N^2), but the additional N multiplier
was not needed.
Backpatch all the way since this has been there since 7.x, and it
presents at least a mild hazard in that trying to do Bind, PREPARE or
EXPLAIN on a hostile query could take excessive time (without
honouring cancels or timeouts) even if the query was never executed.
Previously, this code blindly followed the common coding pattern of
passing PQserverVersion(AH->connection) as the server-version parameter
of fmtQualifiedId. That works as long as we have a connection; but in
pg_restore with text output, we don't. Instead we got a zero from
PQserverVersion, which fmtQualifiedId interpreted as "server is too old to
have schemas", and so the name went unqualified. That still accidentally
managed to work in many cases, which is probably why this ancient bug went
undetected for so long. It only became obvious in the wake of the changes
to force dump/restore to execute with restricted search_path.
In HEAD/v11, let's deal with this by ripping out fmtQualifiedId's server-
version behavioral dependency, and just making it schema-qualify all the
time. We no longer support pg_dump from servers old enough to need the
ability to omit schema name, let alone restoring to them. (Also, the few
callers outside pg_dump already didn't work with pre-schema servers.)
In older branches, that's not an acceptable solution, so instead just
tweak the DISABLE/ENABLE TRIGGER logic to ensure it will schema-qualify
its output regardless of server version.
Per bug #15338 from Oleg somebody. Back-patch to all supported branches.
Discussion: https://postgr.es/m/153452458706.1316.5328079417086507743@wrigleys.postgresql.org
Everything of use to frontend code should now appear in the _d.h files,
and making this change frees us from needing to worry about whether the
catalog header files proper are frontend-safe.
Remove src/interfaces/ecpg/ecpglib/pg_type.h entirely, as the previous
commit reduced it to a confusingly-named wrapper around pg_type_d.h.
In passing, make test_rls_hooks.c follow project convention of including
our own files with #include "" not <>.
Discussion: https://postgr.es/m/23690.1523031777@sss.pgh.pa.us
This makes the client programs behave as documented regardless of the
connect-time search_path and regardless of user-created objects. Today,
a malicious user with CREATE permission on a search_path schema can take
control of certain of these clients' queries and invoke arbitrary SQL
functions under the client identity, often a superuser. This is
exploitable in the default configuration, where all users have CREATE
privilege on schema "public".
This changes behavior of user-defined code stored in the database, like
pg_index.indexprs and pg_extension_config_dump(). If they reach code
bearing unqualified names, "does not exist" or "no schema has been
selected to create in" errors might appear. Users may fix such errors
by schema-qualifying affected names. After upgrading, consider watching
server logs for these errors.
The --table arguments of src/bin/scripts clients have been lax; for
example, "vacuumdb -Zt pg_am\;CHECKPOINT" performed a checkpoint. That
now fails, but for now, "vacuumdb -Zt 'pg_am(amname);CHECKPOINT'" still
performs a checkpoint.
Back-patch to 9.3 (all supported versions).
Reviewed by Tom Lane, though this fix strategy was not his first choice.
Reported by Arseniy Sharoglazov.
Security: CVE-2018-1058
Flex generates a lot of functions that are not actually used. In order
to avoid coverage figures being ruined by that, mark up the part of the
.l files where the generated code appears by lcov exclusion markers.
That way, lcov will typically only reported on coverage for the .l file,
which is under our control, but not for the .c file.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
"\if :{?variable_name}" will be translated to "\if TRUE" if the variable
exists and "\if FALSE" otherwise. Thus it will be possible to execute code
conditionally on the existence of the variable, regardless of its value.
Fabien Coelho, with some review by Robins Tharakan and some light text
editing by me.
Discussion: https://postgr.es/m/alpine.DEB.2.20.1708260835520.3627@lancre
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Previously, text between backquotes in a psql metacommand's arguments
was always passed to the shell literally. That considerably hobbles
the usefulness of the feature for scripting, so we'd foreseen for a long
time that we'd someday want to allow substitution of psql variables into
the shell command. IMO the addition of \if metacommands has brought us to
that point, since \if can greatly benefit from some sort of client-side
expression evaluation capability, and psql itself is not going to grow any
such thing in time for v10. Hence, this patch. It allows :VARIABLE to be
replaced by the exact contents of the named variable, while :'VARIABLE'
is replaced by the variable's contents suitably quoted to become a single
shell-command argument. (The quoting rules for that are different from
those for SQL literals, so this is a bit of an abuse of the :'VARIABLE'
notation, but I doubt anyone will be confused.)
As with other situations in psql, no substitution occurs if the word
following a colon is not a known variable name. That limits the risk of
compatibility problems for existing psql scripts; but the risk isn't zero,
so this needs to be called out in the v10 release notes.
Discussion: https://postgr.es/m/9561.1490895211@sss.pgh.pa.us
The immediate motivation for this is to provide clean infrastructure
for the proposed \if...\endif patch for psql; but it seems like a good
thing to have even if that patch doesn't get in. Previously the callback
functions could only make use of application-global state, which is a
pretty severe handicap.
For the moment, the pointer is only passed through to the get_variable
callback function. I considered also passing it to the write_error
callback, but for now let's not. Neither psql nor pgbench has a use
for that, and in the case of psql we'd have to invent a separate wrapper
function because we would certainly not want to change the signature of
psql_error().
Discussion: https://postgr.es/m/10108.1489418309@sss.pgh.pa.us
c.h #includes a number of core libc header files, such as <stdio.h>.
There's no point in re-including these after having read postgres.h,
postgres_fe.h, or c.h; so remove code that did so.
While at it, also fix some places that were ignoring our standard pattern
of "include postgres[_fe].h, then system header files, then other Postgres
header files". While there's not any great magic in doing it that way
rather than system headers last, it's silly to have just a few files
deviating from the general pattern. (But I didn't attempt to enforce this
globally, only in files I was touching anyway.)
I'd be the first to say that this is mostly compulsive neatnik-ism,
but over time it might save enough compile cycles to be useful.
