get_explain_guc_options() crashed if a string GUC marked GUC_EXPLAIN
has a NULL boot_val. Nosing around found a couple of other places
that seemed insufficiently cautious about NULL string values, although
those are likely unreachable in practice. Add some commentary
defining the expectations for NULL values of string variables,
in hopes of forestalling future additions of more such bugs.
Xing Guo, Aleksander Alekseev, Tom Lane
Discussion: https://postgr.es/m/CACpMh+AyDx5YUpPaAgzVwC1d8zfOL4JoD-uyFDnNSa1z0EsDQQ@mail.gmail.com
Since C99, there can be a trailing comma after the last value in an
enum definition. A lot of new code has been introducing this style on
the fly. Some new patches are now taking an inconsistent approach to
this. Some add the last comma on the fly if they add a new last
value, some are trying to preserve the existing style in each place,
some are even dropping the last comma if there was one. We could
nudge this all in a consistent direction if we just add the trailing
commas everywhere once.
I omitted a few places where there was a fixed "last" value that will
always stay last. I also skipped the header files of libpq and ecpg,
in case people want to use those with older compilers. There were
also a small number of cases where the enum type wasn't used anywhere
(but the enum values were), which ended up confusing pgindent a bit,
so I left those alone.
Discussion: https://www.postgresql.org/message-id/flat/386f8c45-c8ac-4681-8add-e3b0852c1620%40eisentraut.org
Previously, ALTER SYSTEM failed if the target GUC wasn't present in
the session's GUC hashtable. That is a reasonable behavior for core
(single-part) GUC names, and for custom GUCs for which we have loaded
an extension that's reserved the prefix. But it's unnecessarily
restrictive otherwise, and it also causes inconsistent behavior:
you can "ALTER SYSTEM SET foo.bar" only if you did "SET foo.bar"
earlier in the session. That's fairly silly.
Hence, refactor things so that we can execute ALTER SYSTEM even
if the variable doesn't have a GUC hashtable entry, as long as the
name meets the custom-variable naming requirements and does not
have a reserved prefix. (It's safe to do this even if the
variable belongs to an extension we currently don't have loaded.
A bad value will at worst cause a WARNING when the extension
does get loaded.)
Also, adjust GRANT ON PARAMETER to have the same opinions about
whether to allow an unrecognized GUC name, and to throw the
same errors if not (it previously used a one-size-fits-all
message for several distinguishable conditions). By default,
only a superuser will be allowed to do ALTER SYSTEM SET on an
unrecognized name, but it's possible to GRANT the ability to
do it.
Patch by me, pursuant to a documentation complaint from
Gavin Panella. Arguably this is a bug fix, but given the
lack of other complaints I'll refrain from back-patching.
Discussion: https://postgr.es/m/2617358.1697501956@sss.pgh.pa.us
Discussion: https://postgr.es/m/169746329791.169914.16613647309012285391@wrigleys.postgresql.org
The SIGTERM handler for the startup process immediately calls
proc_exit() for the duration of the restore_command, i.e., a call
to system(). This system() call forks a new process to execute the
shell command, and this child process inherits the parent's signal
handlers. If both the parent and child processes receive SIGTERM,
both will attempt to call proc_exit(). This can end badly. For
example, both processes will try to remove themselves from the
PGPROC shared array.
To fix this problem, this commit adds a check in
StartupProcShutdownHandler() to see whether MyProcPid == getpid().
If they match, this is the parent process, and we can proc_exit()
like before. If they do not match, this is a child process, and we
just emit a message to STDERR (in a signal safe manner) and
_exit(), thereby skipping any problematic exit callbacks.
This commit also adds checks in proc_exit(), ProcKill(), and
AuxiliaryProcKill() that verify they are not being called within
such child processes.
Suggested-by: Andres Freund
Reviewed-by: Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/Y9nGDSgIm83FHcad%40paquier.xyz
Discussion: https://postgr.es/m/20230223231503.GA743455%40nathanxps13
Backpatch-through: 11
This commit introduces trigger on login event, allowing to fire some actions
right on the user connection. This can be useful for logging or connection
check purposes as well as for some personalization of environment. Usage
details are described in the documentation included, but shortly usage is
the same as for other triggers: create function returning event_trigger and
then create event trigger on login event.
In order to prevent the connection time overhead when there are no triggers
the commit introduces pg_database.dathasloginevt flag, which indicates database
has active login triggers. This flag is set by CREATE/ALTER EVENT TRIGGER
command, and unset at connection time when no active triggers found.
Author: Konstantin Knizhnik, Mikhail Gribkov
Discussion: https://postgr.es/m/0d46d29f-4558-3af9-9c85-7774e14a7709%40postgrespro.ru
Reviewed-by: Pavel Stehule, Takayuki Tsunakawa, Greg Nancarrow, Ivan Panchenko
Reviewed-by: Daniel Gustafsson, Teodor Sigaev, Robert Haas, Andres Freund
Reviewed-by: Tom Lane, Andrey Sokolov, Zhihong Yu, Sergey Shinderuk
Reviewed-by: Gregory Stark, Nikita Malakhov, Ted Yu
The versions of these functions that accept object OIDs are supposed
to return NULL, rather than failing, if the target object has been
dropped. This makes it safe(r) to use them in queries that scan
catalogs, since the functions will be applied to objects that are
visible in the query's snapshot but might now be gone according to
the catalog snapshot. In most cases we implemented this by doing
a SearchSysCacheExists test and assuming that if that succeeds, we
can safely invoke the appropriate aclchk.c function, which will
immediately re-fetch the same syscache entry. It was argued that
if the existence test succeeds then the followup fetch must succeed
as well, for lack of any intervening AcceptInvalidationMessages call.
Alexander Lakhin demonstrated that this is not so when
CATCACHE_FORCE_RELEASE is enabled: the syscache entry will be forcibly
dropped at the end of SearchSysCacheExists, and then it is possible
for the catalog snapshot to get advanced while re-fetching the entry.
Alexander's test case requires the operation to happen inside a
parallel worker, but that seems incidental to the fundamental problem.
What remains obscure is whether there is a way for this to happen in a
non-debug build. Nonetheless, CATCACHE_FORCE_RELEASE is a very useful
test methodology, so we'd better make the code safe for it.
After some discussion we concluded that the most future-proof fix
is to give up the assumption that checking SearchSysCacheExists can
guarantee success of a later fetch. At best that assumption leads
to fragile code --- for example, has_type_privilege appears broken
for array types even if you believe the assumption holds. And it's
not even particularly efficient.
There had already been some work towards extending the aclchk.c
APIs to include "is_missing" output flags, so this patch extends
that work to cover all the aclchk.c functions that are used by the
has_xxx_privilege() functions. (This allows getting rid of some
ad-hoc decisions about not throwing errors in certain places in
aclchk.c.)
In passing, this fixes the has_sequence_privilege() functions to
provide the same guarantees as their cousins: for some reason the
SearchSysCacheExists tests never got added to those.
There is more work to do to remove the unsafe coding pattern with
SearchSysCacheExists in other places, but this is a pretty
self-contained patch so I'll commit it separately.
Per bug #18014 from Alexander Lakhin. Given the lack of hard evidence
that there's a bug in non-debug builds, I'm content to fix this only
in HEAD. (Perhaps we should clean up the has_sequence_privilege()
oversight in the back branches, but in the absence of field complaints
I'm not too excited about that either.)
Discussion: https://postgr.es/m/18014-28c81cb79d44295d@postgresql.org
* sync_method is renamed to wal_sync_method.
* sync_method_options[] is renamed to wal_sync_method_options[].
* assign_xlog_sync_method() is renamed to assign_wal_sync_method().
* The names of the available synchronization methods are now
prefixed with "WAL_SYNC_METHOD_" and have been moved into a
WalSyncMethod enum.
* PLATFORM_DEFAULT_SYNC_METHOD is renamed to
PLATFORM_DEFAULT_WAL_SYNC_METHOD, and DEFAULT_SYNC_METHOD is
renamed to DEFAULT_WAL_SYNC_METHOD.
These more descriptive names help distinguish the code for
wal_sync_method from the code for DataDirSyncMethod (e.g., the
recovery_init_sync_method configuration parameter and the
--sync-method option provided by several frontend utilities). This
change also prevents name collisions between the aforementioned
sets of code. Since this only improves the naming of internal
identifiers, there should be no behavior change.
Author: Maxim Orlov
Discussion: https://postgr.es/m/CACG%3DezbL1gwE7_K7sr9uqaCGkWhmvRTcTEnm3%2BX1xsRNwbXULQ%40mail.gmail.com
Previously, the JSON code didn't have to worry too much about freeing
JsonLexContext, because it was never too long-lived. With new features
being added for SQL/JSON this is no longer the case. Add a routine
that knows how to free this struct and apply that to a few places, to
prevent this from becoming problematic.
At the same time, we change the API of makeJsonLexContextCstringLen to
make it receive a pointer to JsonLexContext for callers that want it to
be stack-allocated; it can also be passed as NULL to get the original
behavior of a palloc'ed one.
This also causes an ABI break due to the addition of flags to
JsonLexContext, so we can't easily backpatch it. AFAICS that's not much
of a problem; apparently some leaks might exist in JSON usage of
text-search, for example via json_to_tsvector, but I haven't seen any
complaints about that.
Per Coverity complaint about datum_to_jsonb_internal().
Discussion: https://postgr.es/m/20230808174110.oq3iymllsv6amkih@alvherre.pgsql
Unlike the other pg_stat_get_backend* functions,
pg_stat_get_backend_subxact() looks up the backend entry by using
its integer argument as a 1-based index in an internal array. The
other functions look for the entry with the matching session
backend ID. These numbers often match, but that isn't reliably
true.
This commit resolves this discrepancy by introducing
pgstat_get_local_beentry_by_backend_id() and using it in
pg_stat_get_backend_subxact(). We cannot use
pgstat_get_beentry_by_backend_id() because it returns a
PgBackendStatus, which lacks the locally computed additions
available in LocalPgBackendStatus that are required by
pg_stat_get_backend_subxact().
Author: Ian Barwick
Reviewed-by: Sami Imseih, Michael Paquier, Robert Haas
Discussion: https://postgr.es/m/CAB8KJ%3Dj-ACb3H4L9a_b3ZG3iCYDW5aEu3WsPAzkm2S7JzS1Few%40mail.gmail.com
Backpatch-through: 16
Presently, pgstat_fetch_stat_beentry() accepts a session's backend
ID as its argument, and pgstat_fetch_stat_local_beentry() accepts a
1-based index in an internal array as its argument. The former is
typically used wherever a user must provide a backend ID, and the
latter is usually used internally when looping over all entries in
the array. This difference was first introduced by d7e39d72ca.
Before that commit, both functions accepted a 1-based index to the
internal array.
This commit renames these two functions to make it clear whether
they use the backend ID or the 1-based index to look up the entry.
This is preparatory work for a follow-up change that will introduce
a function for looking up a LocalPgBackendStatus using a backend
ID.
Reviewed-by: Ian Barwick, Sami Imseih, Michael Paquier, Robert Haas
Discussion: https://postgr.es/m/CAB8KJ%3Dj-ACb3H4L9a_b3ZG3iCYDW5aEu3WsPAzkm2S7JzS1Few%40mail.gmail.com
Backpatch-through: 16
Make the primary messages more compact and make the detail messages
uniform. In initdb.c and pg_resetwal.c, use the newish
option_parse_int() to simplify some of the option parsing. For the
backend GUC wal_segment_size, add a GUC check hook to do the
verification instead of coding it in bootstrap.c. This might be
overkill, but that way the check is in the right place and it becomes
more self-documenting.
In passing, make pg_controldata use the logging API for warning
messages.
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://www.postgresql.org/message-id/flat/9939aa8a-d7be-da2c-7715-0a0b5535a1f7@eisentraut.org
This new view, wrapped around a SRF, shows some information known about
wait events, as of:
- Name.
- Type (Activity, I/O, Extension, etc.).
- Description.
All the information retrieved comes from wait_event_names.txt, and the
description is the same as the documentation with filters applied to
remove any XML markups. This view is useful when joined with
pg_stat_activity to get the description of a wait event reported.
Custom wait events for extensions are included in the view.
Original idea by Yves Colin.
Author: Bertrand Drouvot
Reviewed-by: Kyotaro Horiguchi, Masahiro Ikeda, Tom Lane, Michael
Paquier
Discussion: https://postgr.es/m/0e2ae164-dc89-03c3-cf7f-de86378053ac@gmail.com
Previously, if a specialized comparator found equal datum1 keys,
the "comparetup" function would repeat the comparison on the
datum before proceeding with the unabbreviated first key
and/or additional sort keys.
Move comparing additional sort keys into "tiebreak" functions so
that specialized comparators can call these directly if needed,
avoiding duplicate work.
Reviewed by David Rowley
Discussion: https://postgr.es/m/CAFBsxsGaVfUrjTghpf%3DkDBYY%3DjWx1PN-fuusVe7Vw5s0XqGdGw%40mail.gmail.com
Currently, the names of the custom wait event must be registered for
each backend, requiring all these to link to the shared memory area of
an extension, even if these are not loaded with
shared_preload_libraries.
This patch relaxes the constraints related to this infrastructure by
storing the wait events and their names in two dynamic hash tables in
shared memory. This has the advantage to simplify the registration of
custom wait events to a single routine call that returns an event ID
ready for consumption:
uint32 WaitEventExtensionNew(const char *wait_event_name);
The caller of this routine can then cache locally the ID returned, to be
used for pgstat_report_wait_start(), WaitLatch() or a similar routine.
The implementation uses two hash tables: one with a key based on the
event name to avoid duplicates and a second using the event ID as key
for event lookups, like on pg_stat_activity. These tables can hold a
minimum of 16 entries, and a maximum of 128 entries, which should be plenty
enough.
The code changes done in worker_spi show how things are simplified (most
of the code removed in this commit comes from there):
- worker_spi_init() is gone.
- No more shared memory hooks required (size requested and
initialization).
- The custom wait event ID is cached in the process that needs to set
it, with one single call to WaitEventExtensionNew() to retrieve it.
Per suggestion from Andres Freund.
Author: Masahiro Ikeda, with a few tweaks from me.
Discussion: https://postgr.es/m/20230801032349.aaiuvhtrcvvcwzcx@awork3.anarazel.de
Store function config settings in lists to avoid the need to parse and
allocate for each function execution.
Speedup is modest but significant. Additionally, this change also
seems cleaner and supports some other performance improvements under
discussion.
Discussion: https://postgr.es/m/04c8592dbd694e4114a3ed87139a7a04e4363030.camel@j-davis.com
Reviewed-by: Nathan Bossart
Commit 19d8e2308b changed the list of set-of-columns that can be
returned by RelationGetIndexAttrBitmap, but didn't update its
"documentation". That was pretty hard to read already, so rewrite to
make it more comprehensible, adding the missing values while at it.
Backpatch to 16, like that commit.
Discussion: https://postgr.es/m/20230809091155.7c7f3gttjk3dj4ze@alvherre.pgsql
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
The previous commit removed the "override" APIs. Surviving APIs facilitate
plancache.c to snapshot search_path and test whether the current value equals
a remembered snapshot.
Aleksander Alekseev. Reported by Alexander Lakhin and Noah Misch.
Discussion: https://postgr.es/m/8ffb4650-52c4-6a81-38fc-8f99be981130@gmail.com
Two backend routines are added to allow extension to allocate and define
custom wait events, all of these being allocated in the type
"Extension":
* WaitEventExtensionNew(), that allocates a wait event ID computed from
a counter in shared memory.
* WaitEventExtensionRegisterName(), to associate a custom string to the
wait event ID allocated.
Note that this includes an example of how to use this new facility in
worker_spi with tests in TAP for various scenarios, and some
documentation about how to use them.
Any code in the tree that currently uses WAIT_EVENT_EXTENSION could
switch to this new facility to define custom wait events. This is left
as work for future patches.
Author: Masahiro Ikeda
Reviewed-by: Andres Freund, Michael Paquier, Tristan Partin, Bharath
Rupireddy
Discussion: https://postgr.es/m/b9f5411acda0cf15c8fbb767702ff43e@oss.nttdata.com
This Patch introduces three SQL standard JSON functions:
JSON()
JSON_SCALAR()
JSON_SERIALIZE()
JSON() produces json values from text, bytea, json or jsonb values,
and has facilitites for handling duplicate keys.
JSON_SCALAR() produces a json value from any scalar sql value,
including json and jsonb.
JSON_SERIALIZE() produces text or bytea from input which containis
or represents json or jsonb;
For the most part these functions don't add any significant new
capabilities, but they will be of use to users wanting standard
compliant JSON handling.
Catversion bumped as this changes ruleutils.c.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby, Álvaro Herrera,
Peter Eisentraut
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
This is to export datum_to_json(), datum_to_jsonb(), and
jsonb_from_cstring(), though the last one is exported as
jsonb_from_text().
A subsequent commit to add new SQL/JSON constructor functions will
need them for calling from the executor.
Discussion: https://postgr.es/m/20230720160252.ldk7jy6jqclxfxkq%40alvherre.pgsql
This adds the X509 attributes notBefore and notAfter to sslinfo
as well as pg_stat_ssl to allow verifying and identifying the
validity period of the current client certificate.
Author: Cary Huang <cary.huang@highgo.ca>
Discussion: https://postgr.es/m/182b8565486.10af1a86f158715.2387262617218380588@highgo.ca
This essentially removes the JsonbTypeCategory enum and
jsonb_categorize_type() and integrates any jsonb-specific logic that
was in jsonb_categorize_type() into json_categorize_type(), now
moved to jsonfuncs.c. The remaining JsonTypeCategory enum and
json_categorize_type() cover the needs of the callers in both json.c
and jsonb.c. json_categorize_type() has grown a new parameter named
is_jsonb for callers to engage the jsonb-specific behavior of
json_categorize_type().
One notable change in the now exported API of json_categorize_type()
is that it now always returns *outfuncoid even though a caller may
have no need currently to see one.
This is in preparation of later commits to implement additional
SQL/JSON functions.
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
Commit 89e46da5e5 allowed using BTREE indexes that are neither
PRIMARY KEY nor REPLICA IDENTITY on the subscriber during apply of
update/delete. This patch extends that functionality to also allow HASH
indexes.
We explored supporting other index access methods as well but they don't
have a fixed strategy for equality operation which is required by the
current infrastructure in logical replication to scan the indexes.
Author: Kuroda Hayato
Reviewed-by: Peter Smith, Onder Kalaci, Amit Kapila
Discussion: https://postgr.es/m/TYAPR01MB58669D7414E59664E17A5827F522A@TYAPR01MB5866.jpnprd01.prod.outlook.com
This commit adds a new type of parallel message 'P' to allow a
parallel worker to poke at a leader to update the progress.
Currently it supports only incremental progress reporting but it's
possible to allow for supporting of other backend progress APIs in the
future.
There are no users of this new message type as of this commit. That
will follow in future commits.
Idea from Andres Freund.
Author: Sami Imseih
Reviewed by: Michael Paquier, Masahiko Sawada
Discussion: https://www.postgresql.org/message-id/flat/5478DFCD-2333-401A-B2F0-0D186AB09228@amazon.com
locale_t is defined by POSIX.1-2008 and SUSv4, and available on all
targeted systems. For Windows, win32_port.h redirects to a partial
implementation called _locale_t. We can now remove a lot of
compile-time tests for HAVE_LOCALE_T, and associated comments and dead
code branches that were needed for older computers.
Since configure + MinGW builds didn't detect locale_t but now we assume
that all systems have it, further inconsistencies among the 3 Windows build
systems were revealed. With this commit, we no longer define
HAVE_WCSTOMBS_L and HAVE_MBSTOWCS_L on any Windows build system, but
we have logic to deal with that so that replacements are available where
appropriate.
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Tristan Partin <tristan@neon.tech>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CA%2BhUKGLg7_T2GKwZFAkEf0V7vbnur-NfCjZPKZb%3DZfAXSV1ORw%40mail.gmail.com
The documentation and the code is generated automatically from a new
file called wait_event_names.txt, formatted in sections dedicated to
each wait event class (Timeout, Lock, IO, etc.) with three tab-separated
fields:
- C symbol in enums
- Format in the system views
- Description in the docs
Using this approach has several advantages, as we have proved to be
rather bad in maintaining this area of the tree across the years:
- The order of each item in the documentation and the code, which should
be alphabetical, has become incorrect multiple times, and the script
generating the code and documentation has a few rules to enforce that,
making the maintenance a no-brainer.
- Some wait events were added to the code, but not documented, so this
cannot be missed now.
- The order of the tables for each wait event class is enforced in the
documentation (the input .txt file does so as well for clarity, though
this is not mandatory).
- Less code, shaving 1.2k lines from the tree, with 1/3 of the savings
coming from the code, the rest from the documentation.
The wait event types "Lock" and "LWLock" still have their own code path
for their code, hence only the documentation is created for them. These
classes are listed with a special marker called WAIT_EVENT_DOCONLY in
the input file.
Adding a new wait event now requires only an update of
wait_event_names.txt, with "Lock" and "LWLock" treated as exceptions.
This commit has been tested with configure/Makefile, the CI and VPATH
build. clean, distclean and maintainer-clean were working fine.
Author: Bertrand Drouvot, Michael Paquier
Discussion: https://postgr.es/m/77a86b3a-c4a8-5f5d-69b9-d70bbf2e9b98@gmail.com
The following changes are done:
- Addition of WaitEventBufferPin and WaitEventExtension, that hold a
list of wait events related to each category.
- Addition of two functions that encapsulate the list of wait events for
each category.
- Rename BUFFER_PIN to BUFFERPIN (only this wait event class used an
underscore, requiring a specific rule in the automation script).
These changes make a bit easier the automatic generation of all the code
and documentation related to wait events, as all the wait event
categories are now controlled by consistent structures and functions.
Author: Bertrand Drouvot
Discussion: https://postgr.es/m/c6f35117-4b20-4c78-1df5-d3056010dcf5@gmail.com
Discussion: https://postgr.es/m/77a86b3a-c4a8-5f5d-69b9-d70bbf2e9b98@gmail.com
Run pgindent and pgperltidy. It seems we're still some ways
away from all committers doing this automatically. Now that
we have a buildfarm animal that will whine about poorly-indented
code, we'll try to keep the tree more tidy.
Discussion: https://postgr.es/m/3156045.1687208823@sss.pgh.pa.us
Split nbtree's _bt_getbuf function is two: code that read locks or write
locks existing pages remains in _bt_getbuf, while code that deals with
allocating new pages is moved to a new, dedicated function called
_bt_allocbuf. This simplifies most _bt_getbuf callers, since it is no
longer necessary for them to pass a heaprel argument. Many of the
changes to nbtree from commit 61b313e4 can be reverted. This minimizes
the divergence between HEAD/PostgreSQL 16 and earlier release branches.
_bt_allocbuf replaces the previous nbtree idiom of passing P_NEW to
_bt_getbuf. There are only 3 affected call sites, all of which continue
to pass a heaprel for recovery conflict purposes. Note that nbtree's
use of P_NEW was superficial; nbtree never actually relied on the P_NEW
code paths in bufmgr.c, so this change is strictly mechanical.
GiST already took the same approach; it has a dedicated function for
allocating new pages called gistNewBuffer(). That factor allowed commit
61b313e4 to make much more targeted changes to GiST.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CAH2-Wz=8Z9qY58bjm_7TAHgtW6RzZ5Ke62q5emdCEy9BAzwhmg@mail.gmail.com
Eventually it is likely worth trying to deal with this in a more expansive
way, by generating dependency files generated within the scripts. But it's not
entirely obvious how to do that in perl and is work more suitable for 17
anyway.
Reported-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Tristan Partin <tristan@neon.tech>
Discussion: https://postgr.es/m/87v8g7s6bf.fsf@wibble.ilmari.org
While executing maintenance operations (ANALYZE, CLUSTER, REFRESH
MATERIALIZED VIEW, REINDEX, or VACUUM), set search_path to
'pg_catalog, pg_temp' to prevent inconsistent behavior.
Functions that are used for functional indexes, in index expressions,
or in materialized views and depend on a different search path must be
declared with CREATE FUNCTION ... SET search_path='...'.
This change addresses a security risk introduced in commit 60684dd834,
where a role with MAINTAIN privileges on a table may be able to
escalate privileges to the table owner. That commit is not yet part of
any release, so no need to backpatch.
Discussion: https://postgr.es/m/e44327179e5c9015c8dda67351c04da552066017.camel%40j-davis.com
Reviewed-by: Greg Stark
Reviewed-by: Nathan Bossart
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
Non-leaf pages of GiST indexes contain key attributes, leaf pages
contain both key and non-key attributes, and gist_page_items() ignored
the handling of non-key attributes. This caused a few problems when
using gist_page_items() on a GiST index with INCLUDE:
- On a non-leaf page, the function would crash.
- On a leaf page, the function would work, but miss to display all the
values for included attributes.
This commit fixes gist_page_items() to handle such cases in a more
appropriate way, and now displays the values of key and non-key
attributes for each item separately in a style consistent with what
ruleutils.c would generate for the attribute list, depending on the page
type dealt with. In a way similar to how a record is displayed, values
would be double-quoted for key or non-key attributes if required.
ruleutils.c did not provide a routine able to control if non-key
attributes should be displayed, so an extended() routine for index
definitions is added to work around the leaf and non-leaf page
differences.
While on it, this commit fixes a third problem related to the amount of
data reported for key attributes. The code originally relied on
BuildIndexValueDescription() (used for error reports on constraints)
that would not print all the data stored in the index but the index
opclass's input type, so this limited the amount of information
available. This switch makes gist_page_items() much cheaper as there is
no need to run ACL checks for each item printed, which is not an issue
anyway as superuser rights are required to execute the functions of
pageinspect. Opclasses whose data cannot be displayed can rely on
gist_page_items_bytea().
The documentation of this function was slightly incorrect for the
output results generated on HEAD and v15, so adjust it on these
branches.
Author: Alexander Lakhin, Michael Paquier
Discussion: https://postgr.es/m/17884-cb8c326522977acb@postgresql.org
Backpatch-through: 14
This is equivalent to a revert of f193883 and fb32748, with the addition
that the declaration of the SQLValueFunction node needs to gain a couple
of node_attr for query jumbling. The performance impact of removing the
function call inlining is proving to be too huge for some workloads
where these are used. A worst-case test case of involving only simple
SELECT queries with a SQL keyword is proving to lead to a reduction of
10% in TPS via pgbench and prepared queries on a high-end machine.
None of the tests I ran back for this set of changes saw such a huge
gap, but Alexander Lakhin and Andres Freund have found that this can be
noticeable. Keeping the older performance would mean to do more
inlining in the executor when using COERCE_SQL_SYNTAX for a function
expression, similarly to what SQLValueFunction does. This requires more
redesign work and there is little time until 16beta1 is released, so for
now reverting the change is the best way forward, bringing back the
previous performance.
Bump catalog version.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/b32bed1b-0746-9b20-1472-4bdc9ca66d52@gmail.com
An update of the GUC stats_fetch_consistency in a transaction would be
able to trigger an assertion when doing cache->snapshot. In this case,
when retrieving a pgstat entry after the switch, a new snapshot would be
rebuilt, confusing pgstat_build_snapshot() because a snapshot is already
cached with an unexpected mode ("cache").
In order to fix this problem, this commit adds a flag to force a
snapshot clear each time this GUC is changed. Some tests are added to
check, while on it.
Some optimizations in avoiding the snapshot clear should be possible
depending on what is cached and the current GUC value, I guess, but this
solution is simple, and ensures that the state of the cache is updated
each time a new pgstat entry is fetched, hence being consistent with the
level wanted by the client that has set the GUC.
Note that cache->none and snapshot->none would not cause issues, as
fetching a pgstat entry would be retrieved from shared memory on the
second attempt, however a snapshot would still be cached. Similarly,
none->snapshot and none->cache would build a new snapshot on the second
fetch attempt. Finally, snapshot->cache would cache a new snapshot on
the second attempt.
Reported-by: Alexander Lakhin
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/17804-2a118cd046f2d0e5@postgresql.org
backpatch-through: 15
Old versions of Solaris and illumos had buffer overrun bugs in their
strxfrm() implementations. The bugs were fixed more than a decade ago
and the relevant releases are long out of vendor support. It's time to
remove the defense added by commit be8b06c3.
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA+hUKGJ-ZPJwKHVLbqye92-ZXeLoCHu5wJL6L6HhNP7FkJ=meA@mail.gmail.com
This fixes many spelling mistakes in comments, but a few references to
invalid parameter names, function names and option names too in comments
and also some in string constants
Also, fix an #undef that was undefining the incorrect definition
Author: Alexander Lakhin
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/d5f68d19-c0fc-91a9-118d-7c6a5a3f5fad@gmail.com
This reverts commit 3d03b24c3 (Revert Add support for Kerberos
credential delegation) which was committed on the grounds of concern
about portability, but on further review and discussion, it's clear that
we are better off explicitly requiring MIT Kerberos as that appears to
be the only GSSAPI library currently that's under proper maintenance
and ongoing development. The API used for storing credentials was added
to MIT Kerberos over a decade ago while for the other libraries which
appear to be mainly based on Heimdal, which exists explicitly to be a
re-implementation of MIT Kerberos, the API never made it to a released
version (even though it was added to the Heimdal git repo over 5 years
ago..).
This post-feature-freeze change was approved by the RMT.
Discussion: https://postgr.es/m/ZDDO6jaESKaBgej0%40tamriel.snowman.net
This reverts commit 3d4fa227bc.
Per discussion and buildfarm, this depends on APIs that seem to not
be available on at least one platform (NetBSD). Should be certainly
possible to rework to be optional on that platform if necessary but bit
late for that at this point.
Discussion: https://postgr.es/m/3286097.1680922218@sss.pgh.pa.us
