While executing maintenance operations (ANALYZE, CLUSTER, REFRESH
MATERIALIZED VIEW, REINDEX, or VACUUM), set search_path to
'pg_catalog, pg_temp' to prevent inconsistent behavior.
Functions that are used for functional indexes, in index expressions,
or in materialized views and depend on a different search path must be
declared with CREATE FUNCTION ... SET search_path='...'.
This change addresses a security risk introduced in commit 60684dd834,
where a role with MAINTAIN privileges on a table may be able to
escalate privileges to the table owner. That commit is not yet part of
any release, so no need to backpatch.
Discussion: https://postgr.es/m/e44327179e5c9015c8dda67351c04da552066017.camel%40j-davis.com
Reviewed-by: Greg Stark
Reviewed-by: Nathan Bossart
The same routine to check if a specific pattern can be found in the
server logs was copied over four different test scripts. This refactors
the whole to use a single routine located in PostgreSQL::Test::Cluster,
named log_contains, to grab the contents of the server logs and check
for a specific pattern.
On HEAD, the code previously used assumed that slurp_file() could not
handle an undefined offset, setting it to zero, but slurp_file() does
do an extra fseek() before retrieving the log contents only if an offset
is defined. In two places, the test was retrieving the full log
contents with slurp_file() after calling substr() to apply an offset,
ignoring that slurp_file() would be able to handle that.
Backpatch all the way down to ease the introduction of new tests that
could rely on the new routine.
Author: Vignesh C
Reviewed-by: Andrew Dunstan, Dagfinn Ilmari Mannsåker, Michael Paquier
Discussion: https://postgr.es/m/CALDaNm0YSiLpjCmajwLfidQrFOrLNKPQir7s__PeVvh9U3uoTQ@mail.gmail.com
Backpatch-through: 11
Commit 482675987 introduced "run_as_owner" subscription option so that
subscription runs with either the permissions of the subscription
owner or the permission of the table owner. However, tablesync workers
did not use this option for the initial data copy.
With this change, tablesync workers run with appropriate permissions
based on "run_as_owner" option.
Ajin Cherian, with changes and regression tests added by me.
Reported-By: Amit Kapila
Author: Ajin Cherian, Masahiko Sawada
Reviewed-by: Ajin Cherian, Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1L=qzRHPEn+qeMoKQGFBzqGoLBzt_ov0A89iFFiut+ppA@mail.gmail.com
This commit refactors a bit the code in charge of checking for log
patterns when connections fail or succeed, by moving the log pattern
checks into their own routine, for clarity. This has come up as
something to improve while discussing the refactoring of find_in_log().
Backpatch down to 14 where these routines are used, to ease the
introduction of new tests that could rely on them.
Author: Vignesh C, Michael Paquier
Discussion: https://postgr.es/m/CALDaNm0YSiLpjCmajwLfidQrFOrLNKPQir7s__PeVvh9U3uoTQ@mail.gmail.com
Backpatch-through: 14
A placeholder that references the outer join's relid in ph_eval_at
is logically "above" the join, and therefore we can't remove its
PlaceHolderInfo: it might still be used somewhere in the query.
This was not an issue pre-v16 because we failed to remove the join
at all in such cases. The new outer-join-aware-Var infrastructure
permits deducing that it's okay to remove the join, but then we
have to clean up correctly afterwards.
Report and fix by Richard Guo
Discussion: https://postgr.es/m/CAMbWs4_tuVn9EwwMcggGiZJWWstdXX_ci8FeEU17vs+4nLgw3w@mail.gmail.com
The GUC settings lc_collate and lc_ctype are from a time when those
locale settings were cluster-global. When those locale settings were
made per-database (PG 8.4), the settings were kept as read-only. As
of PG 15, you can use ICU as the per-database locale provider, so
examining these settings is already less meaningful and possibly
confusing, since you need to look into pg_database to find out what is
really happening, and they would likely become fully obsolete in the
future anyway.
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://www.postgresql.org/message-id/696054d1-bc88-b6ab-129a-18b8bce6a6f0@enterprisedb.com
When we're deleting a no-op LEFT JOIN from the query, we must remove
the join's joinclauses from surviving relations' joininfo lists.
The invention of "cloned" clauses in 2489d76c4 broke the logic for
that; it'd fail to remove clones that include OJ relids outside the
doomed join's min relid sets, which could happen if that join was
previously discovered to commute with some other join.
This accidentally failed to cause problems in the majority of cases,
because we'd never decide that such a cloned clause was evaluatable at
any surviving join. However, Richard Guo discovered a case where that
did happen, leading to "no relation entry for relid" errors later.
Also, adding assertions that a non-removed clause contains no Vars from
the doomed join exposes that there are quite a few existing regression
test cases where the problem happens but is accidentally not exposed.
The fix for this is just to include the target join's commute_above_r
and commute_below_l sets in the relid set we test against when
deciding whether a join clause is "pushed down" and thus not
removable.
While at it, do a little refactoring: the join's relid set can be
computed inside remove_rel_from_query rather than in the caller.
Patch by me; thanks to Richard Guo for review.
Discussion: https://postgr.es/m/CAMbWs4_PHrRqTKDNnTRsxxQy6BtYCVKsgXm1_gdN2yQ=kmcO5g@mail.gmail.com
We've had multiple issues with the clause_is_computable_at logic that
I introduced in 2489d76c4: it's been known to accept more than one
clone of the same qual at the same plan node, and also to accept no
clones at all. It's looking impractical to get it 100% right on the
basis of the currently-stored information, so fix it by introducing a
new RestrictInfo field "incompatible_relids" that explicitly shows
which outer joins a given clone mustn't be pushed above.
In principle we could populate this field in every RestrictInfo, but
that would cost space and there doesn't presently seem to be a need
for it in general. Also, while deconstruct_distribute_oj_quals can
easily fill the field with the remaining members of the commutative
join set that it's considering, computing it in the general case
seems again pretty complicated. So for now, just fill it for
clone quals.
Along the way, fix a bug that may or may not be only latent:
equivclass.c was generating replacement clauses with is_pushed_down
and has_clone/is_clone markings that didn't match their
required_relids. This led me to conclude that leaving the clone flags
out of make_restrictinfo's purview wasn't such a great idea after all,
so add them.
Per report from Richard Guo.
Discussion: https://postgr.es/m/CAMbWs48EYi_9-pSd0ORes1kTmTeAjT4Q3gu49hJtYCbSn2JyeA@mail.gmail.com
That's how other boolean options are handled, so do likewise.
The previous coding with "enable" and "disable" was seemingly
modeled on gssencmode, but that's a three-way flag.
While at it, add PGGSSDELEGATION to the set of environment
variables cleared by pg_regress and Utils.pm.
Abhijit Menon-Sen, per gripe from Alvaro Herrera
Discussion: https://postgr.es/m/20230522091609.nlyuu4nolhycqs2p@alvherre.pgsql
Use the clause's required_relids not clause_relids for testing
whether it is computable at the current join level, if it is a
clone clause generated by deconstruct_distribute_oj_quals().
Arguably, this is more correct and we should do it for all clauses;
that would at least remove the handwavy claim that we are doing
it to save cycles compared to inspecting Vars individually.
However, attempting to do that exposes that we are not being careful
to compute an accurate value for required_relids in all cases.
I'm unsure whether it's a good idea to attempt to do that for v16,
or leave it as future clean-up. In the meantime, this quick hack
demonstrably fixes some cases, so let's squeeze it in for beta1.
Patch by me, but great thanks to Richard Guo for investigation
and testing. The new test cases are all modeled on his examples.
Discussion: https://postgr.es/m/CAMbWs4-_vwkBij4XOQ5ukxUvLgwTm0kS5_DO9CicUeKbEfKjUw@mail.gmail.com
Complete the task begun in 9c0a0e2ed: we don't want to use the
abbreviation "deleg" for GSS delegation in any user-visible places.
(For consistency, this also changes most internal uses too.)
Abhijit Menon-Sen and Tom Lane
Discussion: https://postgr.es/m/949048.1684639317@sss.pgh.pa.us
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
In commit 9df8f903e I (tgl) switched join_is_removable() from
using the min relid sets of the join under consideration to
using its full syntactic relid sets. This was a mistake,
as it allowed join removal in cases where a reference to the
join output would survive in some syntactically-lower join
condition. Revert to the former coding.
Richard Guo
Discussion: https://postgr.es/m/CAMbWs4-EU9uBGSP7G-iTwLBhRQ=rnZKvFDhD+n+xhajokyPCKg@mail.gmail.com
The idea of EvalPlanQual is that we replace the query's scan of the
result relation with a single injected tuple, and see if we get a
tuple out, thereby implying that the injected tuple still passes the
query quals. (In join cases, other relations in the query are still
scanned normally.) This logic was not updated when commit 86dc90056
made it possible for a single DML query plan to have multiple result
relations, when the query target relation has inheritance or partition
children. We replaced the output for the current result relation
successfully, but other result relations were still scanned normally;
thus, if any other result relation contained a tuple satisfying the
quals, we'd think the EPQ check passed, even if it did not pass for
the injected tuple itself. This would lead to update or delete
actions getting performed when they should have been skipped due to
a conflicting concurrent update in READ COMMITTED isolation mode.
Fix by blocking all sibling result relations from emitting tuples
during an EvalPlanQual recheck. In the back branches, the fix is
complicated a bit by the need to not change the size of struct
EPQState (else we'd have ABI-breaking changes in offsets in
struct ModifyTableState). Like the back-patches of 3f7836ff6
and 4b3e37993, add a separately palloc'd struct to avoid that.
The logic is the same as in HEAD otherwise.
This is only a live bug back to v14 where 86dc90056 came in.
However, I chose to back-patch the test cases further, on the
grounds that this whole area is none too well tested. I skipped
doing so in v11 though because none of the test applied cleanly,
and it didn't quite seem worth extra work for a branch with only
six months to live.
Per report from Ante Krešić (via Aleksander Alekseev)
Discussion: https://postgr.es/m/CAJ7c6TMBTN3rcz4=AjYhLPD_w3FFT0Wq_C15jxCDn8U4tZnH1g@mail.gmail.com
Commits 681d9e462 et al added a test case in namespace.sql that
implicitly relied on there not being a table "public.abc".
However, the concurrently-run transactions.sql test creates precisely
such a table, so with the right timing you'd get a failure.
Creating a table named as generically as "abc" in a common schema
seems like bad practice, so fix this by changing the name of
transactions.sql's table. (Compare 2cf8c7aa4.)
Marina Polyakova
Discussion: https://postgr.es/m/80d0201636665d82185942e7112257b4@postgrespro.ru
Commit 3581cbdcd6 added a flag to identify empty BRIN ranges. This adds
the new flag to brin_page_items() output.
This is kept as a separate commit as it should not be backpatched.
Reviewed-by: Justin Pryzby, Matthias van de Meent, Alvaro Herrera
Discussion: https://postgr.es/m/402430e4-7d9d-6cf1-09ef-464d80afff3b@enterprisedb.com
BRIN indexes did not properly distinguish between summaries for empty
(no rows) and all-NULL ranges, treating them as essentially the same
thing. Summaries were initialized with allnulls=true, and opclasses
simply reset allnulls to false when processing the first non-NULL value.
This however produces incorrect results if the range starts with a NULL
value (or a sequence of NULL values), in which case we forget the range
contains NULL values when adding the first non-NULL value.
This happens because the allnulls flag is used for two separate
purposes - to mark empty ranges (not representing any rows yet) and
ranges containing only NULL values.
Opclasses don't know which of these cases it is, and so don't know
whether to set hasnulls=true. Setting the flag in both cases would make
it correct, but it would also make BRIN indexes useless for queries with
IS NULL clauses. All ranges start empty (and thus allnulls=true), so all
ranges would end up with either allnulls=true or hasnulls=true.
The severity of the issue is somewhat reduced by the fact that it only
happens when adding values to an existing summary with allnulls=true.
This can happen e.g. for small tables (because a summary for the first
range exists for all BRIN indexes), or for tables with large fraction of
NULL values in the indexed columns.
Bulk summarization (e.g. during CREATE INDEX or automatic summarization)
that processes all values at once is not affected by this issue. In this
case the flags were updated in a slightly different way, not forgetting
the NULL values.
To identify empty ranges we use a new flag, stored in an unused bit in
the BRIN tuple header so the on-disk format remains the same. A matching
flag is added to BrinMemTuple, into a 3B gap after bt_placeholder.
That means there's no risk of ABI breakage, although we don't actually
pass the BrinMemTuple to any public API.
We could also skip storing index tuples for empty summaries, but then
we'd have to always process such ranges - even if there are no rows in
large parts of the table (e.g. after a bulk DELETE), it would still
require reading the pages etc. So we store them, but ignore them when
building the bitmap.
Backpatch to 11. The issue exists since BRIN indexes were introduced in
9.5, but older releases are already EOL.
Backpatch-through: 11
Reviewed-by: Justin Pryzby, Matthias van de Meent, Alvaro Herrera
Discussion: https://postgr.es/m/402430e4-7d9d-6cf1-09ef-464d80afff3b@enterprisedb.com
28e626bde0 added the concept of IOOps but neglected to include writeback
operations. ac8d53dae5 added time spent doing these I/O operations. Without
counting writeback, checkpointer write time in the log often differed
substantially from that in pg_stat_io. To fix this, add IOOp IOOP_WRITEBACK
and track writeback in pg_stat_io.
Bumps catversion.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20230419172326.dhgyo4wrrhulovt6%40awork3.anarazel.de
After applying outer-join identity 3 in the forward direction,
it was possible for the planner to mistakenly apply a qual clause
from above the two outer joins at the now-lower join level.
This can give the wrong answer, since a value that would get nulled
by the now-upper join might not yet be null.
To fix, when we perform such a transformation, consider that the
now-lower join hasn't really completed the outer join it's nominally
responsible for and thus its relid set should not include that OJ's
relid (nor should its output Vars have that nullingrel bit set).
Instead we add those bits when the now-upper join is performed.
The existing rules for qual placement then suffice to prevent
higher qual clauses from dropping below the now-upper join.
There are a few complications from needing to consider transitive
closures in case multiple pushdowns have happened, but all in all
it's not a very complex patch.
This is all new logic (from 2489d76c4) so no need to back-patch.
The added test cases all have the same results as in v15.
Tom Lane and Richard Guo
Discussion: https://postgr.es/m/0b819232-4b50-f245-1c7d-c8c61bf41827@postgrespro.ru
This is equivalent to a revert of f193883 and fb32748, with the addition
that the declaration of the SQLValueFunction node needs to gain a couple
of node_attr for query jumbling. The performance impact of removing the
function call inlining is proving to be too huge for some workloads
where these are used. A worst-case test case of involving only simple
SELECT queries with a SQL keyword is proving to lead to a reduction of
10% in TPS via pgbench and prepared queries on a high-end machine.
None of the tests I ran back for this set of changes saw such a huge
gap, but Alexander Lakhin and Andres Freund have found that this can be
noticeable. Keeping the older performance would mean to do more
inlining in the executor when using COERCE_SQL_SYNTAX for a function
expression, similarly to what SQLValueFunction does. This requires more
redesign work and there is little time until 16beta1 is released, so for
now reverting the change is the best way forward, bringing back the
previous performance.
Bump catalog version.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/b32bed1b-0746-9b20-1472-4bdc9ca66d52@gmail.com
Commit 558fff0adf got the order of the parameters to test_status_failed
mixed up which resulted in the runtime being reported as 0 ms. Fix by
changing the order to the correct one. No backpatching is needed since
this has not been shipped in a release yet.
Discussion: https://postgr.es/m/0134C9EC-5F6B-4EAC-B2D5-BB4249BEBD4D@yesql.se
Give the new GUC introduced by d4e71df6 a name that is clearly not
intended for mainstream use quite yet.
Future proposals would drop the prefix only after adding infrastructure
to make it efficient. Having the switch in the tree sooner is good
because it might lead to new discoveries about the hazards awaiting us
on a wide range of systems, but that name was too enticing and could
lead to cross-version confusion in future, per complaints from Noah and
Justin.
Suggested-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> (the idea, not the patch)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (ditto)
Discussion: https://postgr.es/m/20230430041106.GA2268796%40rfd.leadboat.com
I've had a bee in my bonnet for some time about getting rid of
RestrictInfo.is_pushed_down, because it's squishily defined and
requires not-inexpensive extra tests to use (cf RINFO_IS_PUSHED_DOWN).
In commit 2489d76c4, I tried to make remove_rel_from_query() not
depend on that macro; but the replacement test is buggy,
as exposed by a report from Rushabh Lathia and Robert Haas.
That change was pretty incidental to the main goal of 2489d76c4,
so let's just revert it for now. (Getting rid of is_pushed_down
is still far away, anyway.)
Discussion: https://postgr.es/m/CA+TgmoYco=hmg+iX1CW9Y1_CzNoSL81J03wUG-d2_3=rue+L2A@mail.gmail.com
There was some odd wording in corner-case gram.y error messages "some
error ... at or near", which appears to have been modeled after "syntax
error" messages. However, they don't work that way, and they're just
wrong. They're also uncovered by tests. Remove the trailing words,
and also add tests.
They were introduced with 5a2832465fd8; backpatch to 15.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
An update of the GUC stats_fetch_consistency in a transaction would be
able to trigger an assertion when doing cache->snapshot. In this case,
when retrieving a pgstat entry after the switch, a new snapshot would be
rebuilt, confusing pgstat_build_snapshot() because a snapshot is already
cached with an unexpected mode ("cache").
In order to fix this problem, this commit adds a flag to force a
snapshot clear each time this GUC is changed. Some tests are added to
check, while on it.
Some optimizations in avoiding the snapshot clear should be possible
depending on what is cached and the current GUC value, I guess, but this
solution is simple, and ensures that the state of the cache is updated
each time a new pgstat entry is fetched, hence being consistent with the
level wanted by the client that has set the GUC.
Note that cache->none and snapshot->none would not cause issues, as
fetching a pgstat entry would be retrieved from shared memory on the
second attempt, however a snapshot would still be cached. Similarly,
none->snapshot and none->cache would build a new snapshot on the second
fetch attempt. Finally, snapshot->cache would cache a new snapshot on
the second attempt.
Reported-by: Alexander Lakhin
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/17804-2a118cd046f2d0e5@postgresql.org
backpatch-through: 15
The commit a6e04b1d20 added a test to ensure that the invalidated logical
slots don't retain WAL. The test was ensuring that the checkpoint removes
the WAL files corresponding to invalidated logical slots on the standby
node but missed the point that the standby node also had a physical slot
which led to the prevention of WAL file removal. Move the creation of
physical slot on the standby and initialization of cascading standby closer
to the test case that actually required it so that other tests don't get
affected by the presence of the physical slot on standby.
Author: Bertrand Drouvot
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/2fefa454-5a70-2174-ddbf-4a0e41537139@gmail.com
If an SRF in the FROM clause references a table having row-level
security policies, and we inline that SRF into the calling query,
we neglected to mark the plan as potentially dependent on which
role is executing it. This could lead to later executions in the
same session returning or hiding rows that should have been hidden
or returned instead.
Our thanks to Wolfgang Walther for reporting this problem.
Stephen Frost and Tom Lane
Security: CVE-2023-2455
The two methods don't cooperate, so set_config_option("search_path",
...) has been ineffective under non-empty overrideStack. This defect
enabled an attacker having database-level CREATE privilege to execute
arbitrary code as the bootstrap superuser. While that particular attack
requires v13+ for the trusted extension attribute, other attacks are
feasible in all supported versions.
Standardize on the combination of NewGUCNestLevel() and
set_config_option("search_path", ...). It is newer than
PushOverrideSearchPath(), more-prevalent, and has no known
disadvantages. The "override" mechanism remains for now, for
compatibility with out-of-tree code. Users should update such code,
which likely suffers from the same sort of vulnerability closed here.
Back-patch to v11 (all supported versions).
Alexander Lakhin. Reported by Alexander Lakhin.
Security: CVE-2023-2454
CREATE SCHEMA AUTHORIZATION with appended schema elements can lead to
crashes when comparing the schema name of the query with the schemas
used in the qualification of some clauses in the elements' queries.
The origin of the problem is that the transformation routine for the
elements listed in a CREATE SCHEMA query uses as new, expected, schema
name the one listed in CreateSchemaStmt itself. However, depending on
the query, CreateSchemaStmt.schemaname may be NULL, being computed
instead from the role specification of the query given by the
AUTHORIZATION clause, that could be either:
- A user name string, with the new schema name being set to the same
value as the role given.
- Guessed from CURRENT_ROLE, SESSION_ROLE or CURRENT_ROLE, with a new
schema name computed from the security context where CREATE SCHEMA is
running.
Regression tests are added for CREATE SCHEMA with some appended elements
(some of them with schema qualifications), covering also some role
specification patterns.
While on it, this simplifies the context structure used during the
transformation of the elements listed in a CREATE SCHEMA query by
removing the fields for the role specification and the role type. They
were not used, and for the role specification this could be confusing as
the schema name may by extracted from that at the beginning of
CreateSchemaCommand().
This issue exists for a long time, so backpatch down to all the versions
supported.
Reported-by: Song Hongyu
Author: Michael Paquier
Reviewed-by: Richard Guo
Discussion: https://postgr.es/m/17909-f65c12dfc5f0451d@postgresql.org
Backpatch-through: 11
The test to ensure that decoding changes via logical slot from another
database will fail was incorrectly done on the primary node instead of on
the standby node.
In the passing, make the test to wait for replay catchup by using
wait_for_replay_catchup(). This will make it consistent with the way we
wait at other places in the test.
Author: Shi yu
Reviewed-by: Bertrand Drouvot, Amit Kapila
Discussion: https://postgr.es/m/OSZPR01MB6310B0A507A0F2A2D379F38CFD6A9@OSZPR01MB6310.jpnprd01.prod.outlook.com
Commit 664d75753 added the BackgroundPsql module with helper functions
for tests running interactive or background psql tasks. The new module
was however not added to the install rules of the build systems.
Reported-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/c0ba3008-dbc8-e53f-29f2-2e9abe72b2a2@enterprisedb.com
The errormessage for an incorrect require_auth method wasn't using the
common "invalid %s value" errormessage which lessens the burden on our
translators. Fix by changing to that format to make use of existing
translations and to make error messages consistent in wording.
Reported and fixed by Gurjeet Singh with some tweaking by myself.
Author: Gurjeet Singh <gurjeet@singh.im>
Discussion: https://postgr.es/m/CABwTF4Xu3g9zohJ9obu8m7MKbf8g63NgpRDjwqPHQgAtB+Gb8Q@mail.gmail.com
