Remove setlocale() and _configthreadlocal() as fallback strategy on
systems that don't have uselocale(), where ECPG tries to control
LC_NUMERIC formatting on input and output of floating point numbers. It
was probably broken on some systems (NetBSD), and the code was also
quite messy and complicated, with obsolete configure tests (Windows).
It was also arguably broken, or at least had unstated environmental
requirements, if pgtypeslib code was called directly.
Instead, introduce PG_C_LOCALE to refer to the "C" locale as a locale_t
value. It maps to the special constant LC_C_LOCALE when defined by libc
(macOS, NetBSD), or otherwise uses a process-lifetime locale_t that is
allocated on first use, just as ECPG previously did itself. The new
replacement might be more widely useful. Then change the float parsing
and printing code to pass that to _l() functions where appropriate.
Unfortunately the portability of those functions is a bit complicated.
First, many obvious and useful _l() functions are missing from POSIX,
though most standard libraries define some of them anyway. Second,
although the thread-safe save/restore technique can be used to replace
the missing ones, Windows and NetBSD refused to implement standard
uselocale(). They might have a point: "wide scope" uselocale() is hard
to combine with other code and error-prone, especially in library code.
Luckily they have the _l() functions we want so far anyway. So we have
to be prepared for both ways of doing things:
1. In ECPG, use strtod_l() for parsing, and supply a port.h replacement
using uselocale() over a limited scope if missing.
2. Inside our own snprintf.c, use three different approaches to format
floats. For frontend code, call libc's snprintf_l(), or wrap libc's
snprintf() in uselocale() if it's missing. For backend code, snprintf.c
can keep assuming that the global locale's LC_NUMERIC is "C" and call
libc's snprintf() without change, for now.
(It might eventually be possible to call our in-tree Ryū routines to
display floats in snprintf.c, given the C-locale-always remit of our
in-tree snprintf(), but this patch doesn't risk changing anything that
complicated.)
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Tristan Partin <tristan@partin.io>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CWZBBRR6YA8D.8EHMDRGLCKCD%40neon.tech
This was left out of the original patch for virtual generated columns
(commit 83ea6c5402).
This just involves a bit of extra work in the executor to expand the
generation expressions and run a "IS NOT NULL" test against them.
There is also a bit of work to make sure that not-null constraints are
checked during a table rewrite.
Author: jian he <jian.universality@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Navneet Kumar <thanit3111@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CACJufxHArQysbDkWFmvK+D1TPHQWWTxWN15cMuUaTYX3xhQXgg@mail.gmail.com
This removes some setlocale() calls and a lot of commentary about how
dangerous that is. strftime_l() is from POSIX 2008, and on Windows we
use _wcsftime_l().
While here, adjust error message for strftime_l() failure: it does not
in practice set errno (even though POSIX says it could), so no %m.
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CA%2BhUKGJqVe0%2BPv9dvC9dSums_PXxGo9SWcxYAMBguWJUGbWz-A%40mail.gmail.com
As revised by commit 9324c8c58, PG_MODULE_MAGIC constructed a
struct initializer containing both designated fields and a
non-designated "0". That's okay in C, but not in C++, with
the result that extensions written in C++ failed to compile.
Change it to use only designated field initializers.
Author: Yurii Rashkovskii <yrashk@omnigres.com>
Discussion: https://postgr.es/m/CAG=VW14mctsR543gpzLCuJ9JgJqwa=ptmBfGvxEjs+k8Jf7-Bg@mail.gmail.com
Commit 62d712ecfd introduced the capability to calculate the same
queryId for queries with different lengths of constants in a list for an
IN clause. This behavior was originally enabled with a GUC
query_id_squash_values. After a discussion about the value of such a
GUC, it was decided to back out of the use of a GUC and make the
squashing behavior the only available option.
Author: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/Z-LZyygkkNyA8-kR@msg.df7cb.de
Discussion: https://postgr.es/m/CA+q6zcVTK-3C-8NWV1oY2NZrvtnMCDqnyYYyk1T7WMUG65MeOQ@mail.gmail.com
This involves four different implementation strategies:
1. For Windows, we now require _configthreadlocale() to be available
and work (commit f1da075d9a), and the documentation says that the
object returned by localeconv() is in thread-local memory.
2. For glibc, we translate to nl_langinfo_l() calls, because it
offers the same information that way as an extension, and that API is
thread-safe.
3. For macOS/*BSD, use localeconv_l(), which is thread-safe.
4. For everything else, use uselocale() to set the locale for the
thread, and use a big ugly lock to defend against the returned object
being concurrently clobbered. In practice this currently means only
Solaris.
The new call is used in pg_locale.c, replacing calls to setlocale() and
localeconv().
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CA%2BhUKGJqVe0%2BPv9dvC9dSums_PXxGo9SWcxYAMBguWJUGbWz-A%40mail.gmail.com
Previously NULL nodes were ignored. This could cause issues where the
computed query ID could match for queries where fields that are next to
each other in their Node struct where one field was NULL and the other
non-NULL. For example, the Query struct had distinctClause and sortClause
next to each other. If someone wrote;
SELECT DISTINCT c1 FROM t;
and then;
SELECT c1 FROM t ORDER BY c1;
these would produce the same query ID since, in the first query, we
ignored the NULL sortClause and appended the jumble bytes for the
distictClause. In the latter query, since we did nothing for the NULL
distinctClause then jumble the non-NULL sortClause, and since the node
representation stored is the same in both cases, the query IDs were
identical.
Here we fix this by always accounting for NULL nodes by recording that
we saw a NULL in the jumble buffer. This fixes the issue as the order that
the NULL is recorded isn't the same in the above two queries.
Author: Bykov Ivan <i.bykov@modernsys.ru>
Author: Michael Paquier <michael@paquier.xyz>
Author: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/aafce7966e234372b2ba876c0193f1e9%40localhost.localdomain
Performing AIO using io_uring can be considerably faster than
io_method=worker, particularly when lots of small IOs are issued, as
a) the context-switch overhead for worker based AIO becomes more significant
b) the number of IO workers can become limiting
io_uring, however, is linux specific and requires an additional compile-time
dependency (liburing).
This implementation is fairly simple and there are substantial optimization
opportunities.
The description of the existing AIO_IO_COMPLETION wait event is updated to
make the difference between it and the new AIO_IO_URING_EXECUTION clearer.
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Jakub Wartak <jakub.wartak@enterprisedb.com>
Discussion: https://postgr.es/m/uvrtrknj4kdytuboidbhwclo4gxhswwcpgadptsjvjqcluzmah%40brqs62irg4dt
Discussion: https://postgr.es/m/20210223100344.llw5an2aklengrmn@alap3.anarazel.de
Discussion: https://postgr.es/m/stj36ea6yyhoxtqkhpieia2z4krnam7qyetc57rfezgk4zgapf@gcnactj4z56m
The old naming pattern (mirroring liburing's naming) was inconsistent with
the (not yet introduced) callers. It seems better to get rid of the
inconsistency now than to grow more users of the odd naming.
Reported-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20250326001915.bc.nmisch@google.com
Otherwise the results of e.g. temp table buffer verification errors will not
reach bufmgr.c. Obviously that's not right. Found while expanding the tests
for invalid buffer contents.
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20250326001915.bc.nmisch@google.com
This macro allows dynamically loaded shared libraries (modules) to
provide a wired-in module name and version, and possibly other
compile-time-constant fields in future. This information can be
retrieved with the new pg_get_loaded_modules() function.
This feature is expected to be particularly useful for modules
that do not have any exposed SQL functionality and thus are
not associated with a SQL-level extension object. But even for
modules that do belong to extensions, being able to verify the
actual code version can be useful.
Author: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Yurii Rashkovskii <yrashk@omnigres.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/dd4d1b59-d0fe-49d5-b28f-1e463b68fa32@gmail.com
Due to a conflict in macro names on Windows between <wincrypt.h>
and <openssl/ssl.h> these headers need to be included using a
predictable pattern with an undef to handle that. The GSSAPI
header <gssapi.h> does include <wincrypt.h> which cause problems
with compiling PostgreSQL using MSVC when OpenSSL and GSSAPI are
both enabled in the tree. Rather than fixing piecemeal for each
file including gssapi headers, move the the includes and undef
to a new file which should be used to centralize the logic.
This patch is a reworked version of a patch by Imran Zaheer
proposed earlier in the thread. Once this has proven effective
in master we should look at backporting this as the problem
exist at least since v16.
Author: Daniel Gustafsson <daniel@yesql.se>
Co-authored-by: Imran Zaheer <imran.zhir@gmail.com>
Reported-by: Dave Page <dpage@pgadmin.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Discussion: https://postgr.es/m/20240708173204.3f3xjilglx5wuzx6@awork3.anarazel.de
These are useful general-purpose math functions which are included in
POSIX and C99, and are commonly included in other math libraries, so
expose them as SQL-callable functions.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Stepan Neretin <sncfmgg@gmail.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Dmitry Koval <d.koval@postgrespro.ru>
Reviewed-by: Alexandra Wang <alexandra.wang.oss@gmail.com>
Discussion: https://postgr.es/m/CAEZATCXpGyfjXCirFk9au+FvM0y2Ah+2-0WSJx7MO368ysNUPA@mail.gmail.com
custom_query_jumble (introduced in 5ac462e2b7 as a node field
attribute) is now assigned to the expanded reference name "eref" of
RangeTblEntry, adding in the query jumble computation the non-qualified
aliased relation name, without the list of column names. The relation
OID is removed from the query jumbling.
The effects of this change can be seen in the tests added by
3430215fe3, where pg_stat_statements (PGSS) entries are now grouped
using the relation name, ignoring the relation search_path may point at.
For example, these two relations are different, but are now grouped in a
single PGSS entry as they are assigned the same query ID:
CREATE TABLE foo1.tab (a int);
CREATE TABLE foo2.tab (b int);
SET search_path = 'foo1';
SELECT count(*) FROM tab;
SET search_path = 'foo2';
SELECT count(*) FROM tab;
SELECT count(*) FROM foo1.tab;
SELECT count(*) FROM foo2.tab;
SELECT query, calls FROM pg_stat_statements WHERE query ~ 'FROM tab';
query | calls
--------------------------+-------
SELECT count(*) FROM tab | 4
(1 row)
It is still possible to use an alias in the FROM clause to split these.
This behavior is useful for relations re-created with the same name,
where queries based on such relations would be grouped in the same
PGSS entry. For permanent schemas, it should not really matter in
practice. The main benefit is for workloads that use a lot of temporary
relations, which are usually re-created with the same name continuously.
These can be a heavy source of bloat in PGSS depending on the workload.
Such entries can now be grouped together, improving the user experience.
The original idea from Christoph Berg used catalog lookups to find
temporary relations, something that the query jumble has never done, and
it could cause some performance regressions. The idea to use
RangeTblEntry.eref and the relation name, applying the same rules for
all relations, temporary and not temporary, has been proposed by Tom
Lane. The documentation additions have been suggested by Sami Imseih.
Author: Michael Paquier <michael@paquier.xyz>
Co-authored-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Christoph Berg <myon@debian.org>
Reviewed-by: Lukas Fittl <lukas@fittl.com>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/Z9iWXKGwkm8RAC93@msg.df7cb.de
This new option instructs pg_upgrade to move the data directories
from the old cluster to the new cluster and then to replace the
catalog files with those generated for the new cluster. This mode
can outperform --link, --clone, --copy, and --copy-file-range,
especially on clusters with many relations.
However, this mode creates many garbage files in the old cluster,
which can prolong the file synchronization step if
--sync-method=syncfs is used. To handle that, we recommend using
--sync-method=fsync with this mode, and pg_upgrade internally uses
"initdb --sync-only --no-sync-data-files" for file synchronization.
pg_upgrade will synchronize the catalog files as they are
transferred. We assume that the database files transferred from
the old cluster were synchronized prior to upgrade.
This mode also complicates reverting to the old cluster, so we
recommend restoring from backup upon failure during or after file
transfer. We did consider teaching pg_upgrade how to generate a
revert script for such failures, but we decided against it due to
the rarity of failing during file transfer, the complexity of
generating the script, and the potential for misusing the script.
The new mode is limited to clusters located in the same file
system. With some effort, we could probably support upgrades
between different file systems, but this mode is unlikely to offer
much benefit if we have to copy the files across file system
boundaries.
It is also limited to upgrades from version 10 or newer. There are
a few known obstacles for using swap mode to upgrade from older
versions. For example, the visibility map format changed in v9.6,
and the sequence tuple format changed in v10. In fact, swap mode
omits the --sequence-data option in its uses of pg_dump and instead
reuses the old cluster's sequence data files. While teaching swap
mode to deal with these kinds of changes is surely possible (and we
may have to deal with similar problems in the future, anyway), it
doesn't seem worth the effort to support upgrades from
long-unsupported versions.
Reviewed-by: Greg Sabino Mullane <htamfids@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/Zyvop-LxLXBLrZil%40nathan
This new option instructs initdb to skip synchronizing any files
in database directories, the database directories themselves, and
the tablespace directories, i.e., everything in the base/
subdirectory and any other tablespace directories. Other files,
such as those in pg_wal/ and pg_xact/, will still be synchronized
unless --no-sync is also specified. --no-sync-data-files is
primarily intended for internal use by tools that separately ensure
the skipped files are synchronized to disk. A follow-up commit
will use this to help optimize pg_upgrade's file transfer step.
The --sync-method=fsync implementation of this option makes use of
a new exclude_dir parameter for walkdir(). When not NULL,
exclude_dir specifies a directory to skip processing. The
--sync-method=syncfs implementation of this option just skips
synchronizing the non-default tablespace directories. This means
that initdb will still synchronize some or all of the database
files, but there's not much we can do about that.
Discussion: https://postgr.es/m/Zyvop-LxLXBLrZil%40nathan
For import and export, use schemaname/relname rather than
regclass.
This is more natural during export, fits with the other arguments
better, and it gives better control over error handling in case we
need to downgrade more errors to warnings.
Also, use text for the argument types for schemaname, relname, and
attname so that casts to "name" are not required.
Author: Corey Huinker <corey.huinker@gmail.com>
Discussion: https://postgr.es/m/CADkLM=ceOSsx_=oe73QQ-BxUFR2Cwqum7-UP_fPe22DBY0NerA@mail.gmail.com
Previously we used pg_int64 in three function prototypes in libpq. It
was added by commit 461ef73f to expose the platform-dependent type used
for int64 in the C89 era. As of commit 962da900 it is defined as
standard int64_t, and the dust seems to have settled.
Let's just use int64_t directly in these three client-facing functions
instead of (yet) another name. We've required C99 and thus <stdint.h>
since PostgreSQL 12, C89 and C++98 compilers are long gone, and client
applications very likely use standard types for their own 64-bit needs.
This also cleans up the obscure placement of a new #include <stdint.h>
directive in postgres_ext.h, required for the new definition. The
typedef was hiding in there for historical reasons, but it doesn't fit
postgres_ext.h's own description of its purpose and there is no evidence
of client applications including postgres_ext.h directly to see it.
Keep a typedef marked deprecated for backward compatibility, but move it
into libpq-fe.h where it was used.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CA%2BhUKGKn_EkNNGMY5RzMcKP%2Ba6urT4JF%3DCPhw_zHtQwjvX6P2g%40mail.gmail.com
This option gives the possibility for query jumble to define a custom
routine for the field of a Node, extending support for
custom_query_jumble as a node field attribute. When dealing with
complex node structures, this can be simpler than having to enforce a
custom function across a full node.
Custom functions need to be defined in queryjumblefuncs.c, named as
_jumble${node}_${field}(), and use in input the JumbleState, the node
and its field. The field is not really required if we have the Node,
but it makes custom implementations somewhat easier to think about. The
code generated by gen_node_support.pl uses a macro called
JUMBLE_CUSTOM(), hiding the internals of the logic inside
queryjumblefuncs.c.
This will be used by an upcoming patch manipulating adding a custom
routine into a field of RangeTblEntry, but this facility can become
useful in more cases.
Reviewed-by: Christoph Berg <myon@debian.org>
Discussion: https://postgr.es/m/Z9y43-dRvb4EtxQ0@paquier.xyz
Reduces memory required for hash aggregation by avoiding an allocation
and a pointer in the TupleHashEntryData structure. That structure is
used for all buckets, whether occupied or not, so the savings is
substantial.
Discussion: https://postgr.es/m/AApHDvpN4v3t_sdz4dvrv1Fx_ZPw=twSnxuTEytRYP7LFz5K9A@mail.gmail.com
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Allows an "extra" argument that allocates extra memory at the end of
the MinimalTuple. This is important for callers that need to store
additional data, but do not want to perform an additional allocation.
Suggested-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAApHDvppeqw2pNM-+ahBOJwq2QmC0hOAGsmCpC89QVmEoOvsdg@mail.gmail.com
The entries aren't freed until the entire hash table is destroyed, so
use the Bump allocator to improve allocation speed, avoid wasting
space on the chunk header, and avoid wasting space due to the
power-of-two allocations.
Discussion: https://postgr.es/m/CAApHDvqv1aNB4cM36FzRwivXrEvBO_LsG_eQ3nqDXTjECaatOQ@mail.gmail.com
Reviewed-by: David Rowley
This field was added in commit 0164a0f9ee to provide a way to
determine whether a storage parameter was explicitly set for the
relation or if it just picked up the default value. In most cases,
this can be accomplished by giving the storage parameter a special
out-of-range default value (e.g., the
autovacuum_vacuum_insert_threshold storage parameter defaults to
-2), but this approach doesn't work in all cases. For example, a
Boolean storage parameter cannot be given an out-of-range default,
so we need another way to discover the source of its value.
Reported-by: "David G. Johnston" <david.g.johnston@gmail.com>
Reviewed-by: "David G. Johnston" <david.g.johnston@gmail.com>
Discussion: https://postgr.es/m/CAKFQuwYKtEUYKS%2B18gRs-xPhn0qOJgM2KGyyWVCODHuVn9F-XQ%40mail.gmail.com
Introduce a new conflict type, multiple_unique_conflicts, to handle cases
where an incoming row during logical replication violates multiple UNIQUE
constraints.
Previously, the apply worker detected and reported only the first
encountered key conflict (insert_exists/update_exists), causing repeated
failures as each constraint violation needs to be handled one by one
making the process slow and error-prone.
With this patch, the apply worker checks all unique constraints upfront
once the first key conflict is detected and reports
multiple_unique_conflicts if multiple violations exist. This allows users
to resolve all conflicts at once by deleting all conflicting tuples rather
than dealing with them individually or skipping the transaction.
In the future, this will also allow us to specify different resolution
handlers for such a conflict type.
Add the stats for this conflict type in pg_stat_subscription_stats.
Author: Nisha Moond <nisha.moond412@gmail.com>
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Discussion: https://postgr.es/m/CABdArM7FW-_dnthGkg2s0fy1HhUB8C3ELA0gZX1kkbs1ZZoV3Q@mail.gmail.com
This field can be optionally set in a PlannedStmt through the planner
hook, giving extensions the possibility to assign an identifier related
to a computed plan. The backend is changed to report it in the backend
entry of a process running (including the extended query protocol), with
semantics and APIs to set or get it similar to what is used for the
existing query ID (introduced in the backend via 4f0b0966c8). The plan
ID is reset at the same timing as the query ID. Currently, this
information is not added to the system view pg_stat_activity; extensions
can access it through PgBackendStatus.
Some patches have been proposed to provide some features in the planning
area, where a plan identifier is used as a key to know the plan involved
(for statistics, plan storage and manipulations, etc.), and the point of
this commit is to provide an anchor in the backend that extensions can
rely on for future work. The reset of the plan identifier is
controlled by core and follows the same pattern as the query identifier
added in 4f0b0966c8.
The contents of this commit are extracted from a larger set proposed
originally by Lukas Fittl, that Sami Imseih has proposed as an
independent change, with a few tweaks sprinkled by me.
Author: Lukas Fittl <lukas@fittl.com>
Author: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAP53Pkyow59ajFMHGpmb1BK9WHDypaWtUsS_5DoYUEfsa_Hktg@mail.gmail.com
Discussion: https://postgr.es/m/CAA5RZ0vyWd4r35uUBUmhngv8XqeiJUkJDDKkLf5LCoWxv-t_pw@mail.gmail.com
Add a new scheduling heuristic: don't end the ongoing primitive index
scan immediately (at the point where _bt_advance_array_keys notices that
the next set of matching tuples must be on a later page) if the primscan
already managed to step right/left from its first leaf page. Schedule a
recheck against the next sibling leaf page's finaltup instead.
The new heuristic tends to avoid scenarios where the top-level scan
repeatedly starts and ends primitive index scans that each read only one
leaf page from a group of neighboring leaf pages. Affected top-level
scans will now tend to step forward (or backward) through the index
instead, without wasting cycles on descending the index anew.
The recheck mechanism isn't exactly new. But up until now it has only
been used to deal with edge cases involving high key finaltups with one
or more truncated -inf attributes that _bt_advance_array_keys deemed
"provisionally satisfied" (satisfied for the purposes of allowing the
scan to step onto the next page, subject to recheck once on that page).
The mechanism was added by commit 5bf748b8, which invented the general
concept of primitive scan scheduling. It was later enhanced by commit
79fa7b3b, which taught it about cases involving -inf attributes that
satisfy inequality scan keys required in the opposite-to-scan direction
only (arguably, they should have been covered by the earliest version).
Now the recheck mechanism can be applied based on scan-level heuristics,
which have nothing to do with truncated high keys. Now rechecks might
be performed by _bt_readpage when scanning in _either_ scan direction.
The theory behind the new heuristic is that any primitive scan that
makes it past its first leaf page is one that is already likely to have
arrays whose key values match index tuples that are closely clustered
together in the index. The rules that determine whether we ever get
past the first page are still conservative (that'll still only happen
when pstate.finaltup strongly suggests that it's the right thing to do).
Surviving past the first leaf page is a strong signal in itself.
Preparation for an upcoming patch that will add skip scan optimizations
to nbtree. That'll work by adding skip arrays, which behave similarly
to SAOP arrays, but generate their elements procedurally and on-demand.
Note that this commit isn't specifically concerned with skip arrays; the
scheduling logic doesn't (and won't) condition anything on whether the
scan uses skip arrays, SAOP arrays, or some combination of the two
(which seems like a good general principle for _bt_advance_array_keys).
While the problems that this commit ameliorates are more likely with
skip arrays (at least in practice), SAOP arrays (or those with very
dense, contiguous array elements) are also affected.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wzkz0wPe6+02kr+hC+JJNKfGtjGTzpG3CFVTQmKwWNrXNw@mail.gmail.com
This commit introduces a new GUC option max_active_replication_origins
to control the maximum number of active replication
origins. Previously, this was controlled by
'max_replication_slots'. Having a separate GUC option provides better
flexibility for setting up subscribers, as they may not require
replication slots (for cascading replication) but always require
replication origins.
Author: Euler Taveira <euler@eulerto.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Discussion: https://postgr.es/m/b81db436-8262-4575-b7c4-bc0c1551000b@app.fastmail.com
errdetail_relkind_not_supported() was declared within
EXPOSE_TO_CLIENT_CODE, which is mistaken since that function
isn't available client-side. While relatively harmless,
this isn't good precedent.
Discussion: https://postgr.es/m/1134562.1742507765@sss.pgh.pa.us
StartReadBuffers() reports a short read when it finds a cached block
that ends a range needing I/O by updating the caller's *nblocks. It
doesn't want to have to unpin the trailing hit that it knows the caller
wants, so the v17 version used sleight of hand in the name of
simplicity: it included it in *nblocks as if it were part of the I/O,
but internally tracked the shorter real I/O size in io_buffers_len (now
removed).
This API change "forwards" the delimiting buffer to the next call. It's
still pinned, and still stored in the caller's array, but *nblocks no
longer includes stray buffers that are not really part of the operation.
The expectation is that the caller still wants the rest of the blocks
and will call again starting from that point, and now it can pass the
already pinned buffer back in (or choose not to and release it).
The change is needed for the coming asynchronous I/O version's larger
version of the problem: by definition it must move BM_IO_IN_PROGRESS
negotiation from WaitReadBuffers() to StartReadBuffers(), but it might
already have many buffers pinned before it discovers a need to split an
I/O. (The current synchronous I/O version hides that detail from
callers by looping over smaller reads if required to make all covered
buffers valid in WaitReadBuffers(), so it looks like one operation but
it might occasionally be several under the covers.)
Aside from avoiding unnecessary pin traffic, this will also be important
for later work on out-of-order streams: you can't prioritize data that
is already available right now if that fact is hidden from you.
The new API is natural for read_stream.c (see ed0b87ca). After a short
read it leaves forwarded buffers where they fell in its circular queue
for the continuing call to pick up.
Single-block StartReadBuffer() and traditional ReadBuffer() share code
but are not affected by the change. They don't do multi-block I/O.
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions)
Discussion: https://postgr.es/m/CA%2BhUKGK_%3D4CVmMHvsHjOVrK6t4F%3DLBpFzsrr3R%2BaJYN8kcTfWg%40mail.gmail.com
Commit c65bc2e1d1 made it possible for
loadable modules to add EXPLAIN options. Normally, any necessary
validation can be performed by the hook function passed to
RegisterExtensionExplainOption, but if a loadable module wants to sanity
check options against each other, that needs to be done after the entire
options list has been processed. So, add an additional hook for that
purpose.
Author: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: http://postgr.es/m/CAA5RZ0vOcJF91O2e5AQN+V6guMNLMhJx83dxALf-iUZ-hLGO_Q@mail.gmail.com
This new parameter works just like the storage parameter of the
same name: if set to true (which is the default), autovacuum and
VACUUM attempt to truncate any empty pages at the end of the table.
It is primarily intended to help users avoid locking issues on hot
standbys. The setting can be overridden with the storage parameter
or VACUUM's TRUNCATE option.
Since there's presently no way to determine whether a Boolean
storage parameter is explicitly set or has just picked up the
default value, this commit also introduces an isset_offset member
to relopt_parse_elt.
Suggested-by: Will Storey <will@summercat.com>
Author: Nathan Bossart <nathandbossart@gmail.com>
Co-authored-by: Gurjeet Singh <gurjeet@singh.im>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Robert Treat <rob@xzilla.net>
Discussion: https://postgr.es/m/Z2DE4lDX4tHqNGZt%40dev.null
The new GUC extension_control_path specifies a path to look for
extension control files. The default value is $system, which looks in
the compiled-in location, as before.
The path search uses the same code and works in the same way as
dynamic_library_path.
Some use cases of this are: (1) testing extensions during package
builds, (2) installing extensions outside security-restricted
containers like Python.app (on macOS), (3) adding extensions to
PostgreSQL running in a Kubernetes environment using operators such as
CloudNativePG without having to rebuild the base image for each new
extension.
There is also a tweak in Makefile.global so that it is possible to
install extensions using PGXS into an different directory than the
default, using 'make install prefix=/else/where'. This previously
only worked when specifying the subdirectories, like 'make install
datadir=/else/where/share pkglibdir=/else/where/lib', for purely
implementation reasons. (Of course, without the path feature,
installing elsewhere was rarely useful.)
Author: Peter Eisentraut <peter@eisentraut.org>
Co-authored-by: Matheus Alcantara <matheusssilv97@gmail.com>
Reviewed-by: David E. Wheeler <david@justatheory.com>
Reviewed-by: Gabriele Bartolini <gabriele.bartolini@enterprisedb.com>
Reviewed-by: Marco Nenciarini <marco.nenciarini@enterprisedb.com>
Reviewed-by: Niccolò Fei <niccolo.fei@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/E7C7BFFB-8857-48D4-A71F-88B359FADCFD@justatheory.com
Commit cbc127917e introduced tracking of unpruned relids to avoid
processing pruned relations, and changed ExecInitModifyTable() to
initialize only unpruned result relations. As a result, MERGE
statements that prune all target partitions can now lead to crashes
or incorrect behavior during execution.
The crash occurs because some executor code paths rely on
ModifyTableState.resultRelInfo[0] being present and initialized,
even when no result relations remain after pruning. For example,
ExecMerge() and ExecMergeNotMatched() use the first resultRelInfo
to determine the appropriate action. Similarly,
ExecInitPartitionInfo() assumes that at least one result relation
exists.
To preserve these assumptions, ExecInitModifyTable() now includes the
first result relation in the initialized result relation list if all
result relations for that ModifyTable were pruned. To enable that,
ExecDoInitialPruning() ensures the first relation is locked if it was
pruned and locking is necessary.
To support this exception to the pruning logic, PlannedStmt now
includes a list of RT indexes identifying the first result relation
of each ModifyTable node in the plan. This allows
ExecDoInitialPruning() to check whether each such relation was
pruned and, if so, lock it if necessary.
Bug: #18830
Reported-by: Robins Tharakan <tharakan@gmail.com>
Diagnozed-by: Tender Wang <tndrwang@gmail.com>
Diagnozed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Co-authored-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/18830-1f31ea1dc930d444%40postgresql.org
The default of 128kB is unchanged, but the upper limit is changed from
32 blocks to 128 blocks, unless the operating system's IOV_MAX is too
low. Some other RDBMSes seem to cap their multi-block buffer pool I/O
around this number, and it seems useful to allow experimentation.
The concrete change is to our definition of PG_IOV_MAX, which provides
the maximum for io_combine_limit and io_max_combine_limit. It also
affects a couple of other places that work with arrays of struct iovec
or smaller objects on the stack, so we still don't want to use the
system IOV_MAX directly without a clamp: it is not under our control and
likely to be 1024. 128 seems acceptable for our current usage.
For Windows, we can't use real scatter/gather yet, so we continue to
define our own IOV_MAX value of 16 and emulate preadv()/pwritev() with
loops. Someone would need to research the trade-offs of raising that
number.
NB if trying to see this working: you might temporarily need to hack
BAS_BULKREAD to be bigger, since otherwise the obvious way of "a very
big SELECT" is limited by that for now.
Suggested-by: Tomas Vondra <tomas@vondra.me>
Discussion: https://postgr.es/m/CA%2BhUKG%2B2T9p-%2BzM6Eeou-RAJjTML6eit1qn26f9twznX59qtCA%40mail.gmail.com
The existing io_combine_limit can be changed by users. The new
io_max_combine_limit is fixed at server startup time, and functions as a
silent clamp on the user setting. That in itself is probably quite
useful, but the primary motivation is:
aio_init.c allocates shared memory for all asynchronous IOs including
some per-block data, and we didn't want to waste memory you'd never used
by assuming they could be up to PG_IOV_MAX. This commit already halves
the size of 'AioHandleIov' and 'AioHandleData'. A follow-up commit can
now expand PG_IOV_MAX without affecting that.
Since our GUC system doesn't support dependencies or cross-checks
between GUCs, the user-settable one now assigns a "raw" value to
io_combine_limit_guc, and the lower of io_combine_limit_guc and
io_max_combine_limit is maintained in io_combine_limit.
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier version)
Discussion: https://postgr.es/m/CA%2BhUKG%2B2T9p-%2BzM6Eeou-RAJjTML6eit1qn26f9twznX59qtCA%40mail.gmail.com
pg_stat_statements produces multiple entries for queries like
SELECT something FROM table WHERE col IN (1, 2, 3, ...)
depending on the number of parameters, because every element of
ArrayExpr is individually jumbled. Most of the time that's undesirable,
especially if the list becomes too large.
Fix this by introducing a new GUC query_id_squash_values which modifies
the node jumbling code to only consider the first and last element of a
list of constants, rather than each list element individually. This
affects both the query_id generated by query jumbling, as well as
pg_stat_statements query normalization so that it suppresses printing of
the individual elements of such a list.
The default value is off, meaning the previous behavior is maintained.
Author: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Sergey Dudoladov (mysterious, off-list)
Reviewed-by: David Geier <geidav.pg@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Sutou Kouhei <kou@clear-code.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Marcos Pegoraro <marcos@f10.com.br>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Tested-by: Yasuo Honda <yasuo.honda@gmail.com>
Tested-by: Sergei Kornilov <sk@zsrv.org>
Tested-by: Maciek Sakrejda <m.sakrejda@gmail.com>
Tested-by: Chengxi Sun <sunchengxi@highgo.com>
Tested-by: Jakub Wartak <jakub.wartak@enterprisedb.com>
Discussion: https://postgr.es/m/CA+q6zcWtUbT_Sxj0V6HY6EZ89uv5wuG5aefpe_9n0Jr3VwntFg@mail.gmail.com
The previous commit introduced the infrastructure to start io_workers. This
commit actually makes the workers execute IOs.
IO workers consume IOs from a shared memory submission queue, run traditional
synchronous system calls, and perform the shared completion handling
immediately. Client code submits most requests by pushing IOs into the
submission queue, and waits (if necessary) using condition variables. Some
IOs cannot be performed in another process due to lack of infrastructure for
reopening the file, and must processed synchronously by the client code when
submitted.
For now the default io_method is changed to "worker". We should re-evaluate
that around beta1, we might want to be careful and set the default to "sync"
for 18.
Reviewed-by: Noah Misch <noah@leadboat.com>
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Co-authored-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/uvrtrknj4kdytuboidbhwclo4gxhswwcpgadptsjvjqcluzmah%40brqs62irg4dt
Discussion: https://postgr.es/m/20210223100344.llw5an2aklengrmn@alap3.anarazel.de
Discussion: https://postgr.es/m/stj36ea6yyhoxtqkhpieia2z4krnam7qyetc57rfezgk4zgapf@gcnactj4z56m
This commit contains the basic, system-wide, infrastructure for
io_method=worker. It does not yet actually execute IO, this commit just
provides the infrastructure for running IO workers, kept separate for easier
review.
The number of IO workers can be adjusted with a PGC_SIGHUP GUC. Eventually
we'd like to make the number of workers dynamically scale up/down based on the
current "IO load".
To allow the number of IO workers to be increased without a restart, we need
to reserve PGPROC entries for the workers unconditionally. This has been
judged to be worth the cost. If it turns out to be problematic, we can
introduce a PGC_POSTMASTER GUC to control the maximum number.
As io workers might be needed during shutdown, e.g. for AIO during the
shutdown checkpoint, a new PMState phase is added. IO workers are shut down
after the shutdown checkpoint has been performed and walsender/archiver have
shut down, but before the checkpointer itself shuts down. See also
87a6690cc6.
Updates PGSTAT_FILE_FORMAT_ID due to the addition of a new BackendType.
Reviewed-by: Noah Misch <noah@leadboat.com>
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Co-authored-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/uvrtrknj4kdytuboidbhwclo4gxhswwcpgadptsjvjqcluzmah%40brqs62irg4dt
Discussion: https://postgr.es/m/20210223100344.llw5an2aklengrmn@alap3.anarazel.de
Discussion: https://postgr.es/m/stj36ea6yyhoxtqkhpieia2z4krnam7qyetc57rfezgk4zgapf@gcnactj4z56m
Specifically, add a per-node hook that is called after the per-node
information has been displayed but before we display children, and a
per-query hook that is called after existing query-level information
is printed. This assumes that extension-added information should
always go at the end rather than the beginning or the middle, but
that seems like an acceptable limitation for simplicity. It also
assumes that extensions will only want to add information, not remove
or reformat existing details; those also seem like acceptable
restrictions, at least for now.
If multiple EXPLAIN extensions are used, the order in which any
additional details are printed is likely to depend on the order in
which the modules are loaded. That seems OK, since the user may
have opinions about the order in which output should appear, and the
extension author can't really know whether their stuff is more or
less important to a particular user than some other extension.
Discussion: http://postgr.es/m/CA+TgmoYSzg58hPuBmei46o8D3SKX+SZoO4K_aGQGwiRzvRApLg@mail.gmail.com
Reviewed-by: Srinath Reddy <srinath2133@gmail.com>
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Since its introduction in fc34b0d9de, the default
maintenance_io_concurrency has been larger than the default
effective_io_concurrency. maintenance_io_concurrency primarily
controlled prefetching done on behalf of the whole system, for
operations like recovery. Therefore it makes sense for it to have a
value equal to or greater than effective_io_concurrency, which controls
I/O concurrency for reading a relation in a bitmap heap scan.
ff79b5b2ab increased effective_io_concurrency to 16, so we'll increase
maintenance_io_concurrency as well. For now, though, we'll keep the
defaults of effective_io_concurrency and maintenance_io_concurrency
equal to one another (16).
On fast, high IOPs systems, significantly higher values of
maintenance_io_concurrency are observably beneficial [1]. However, such
values would flood low IOPs systems and increase overall system I/O
latency.
It is worth mentioning that since 9256822608 and c3e775e608,
maintenance_io_concurrency also controls the I/O concurrency of each
vacuum worker. Since many autovacuum workers may be simultaneously
issuing I/Os, we want to keep maintenance_io_concurrency appropriately
conservative.
[1] https://postgr.es/m/c5d52837-6256-0556-ac8c-d6d3d558820a%40enterprisedb.com
Suggested-by: Jakub Wartak <jakub.wartak@enterprisedb.com>
Discussion: https://postgr.es/m/CAKZiRmxdHQaU%2B2Zpe6d%3Dx%3D0vigJ1sfWwwVYLJAf%3Dud_wQ_VcUw%40mail.gmail.com
Modules can use RegisterExtensionExplainOption to register new
EXPLAIN options, and GetExplainExtensionId, GetExplainExtensionState,
and SetExplainExtensionState to store related state inside the
ExplainState object.
Since this substantially increases the amount of code that needs
to handle ExplainState-related tasks, move a few bits of existing
code to a new file explain_state.c and add the rest of this
infrastructure there.
See the comments at the top of explain_state.c for further
explanation of how this mechanism works.
This does not yet provide a way for such such options to do anything
useful. The intention is that we'll add hooks for that purpose in a
separate commit.
Discussion: http://postgr.es/m/CA+TgmoYSzg58hPuBmei46o8D3SKX+SZoO4K_aGQGwiRzvRApLg@mail.gmail.com
Reviewed-by: Srinath Reddy <srinath2133@gmail.com>
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Add get_opfamily_method() and get_opfamily_member_for_cmptype() in
lsyscache.c. No callers yet, but we'll add some soon. This is part
of generalizing some parts of the code away from having btree
hardcoded and use CompareType instead.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
The main motivations to use AIO in PostgreSQL are:
a) Reduce the time spent waiting for IO by issuing IO sufficiently early.
In a few places we have approximated this using posix_fadvise() based
prefetching, but that is fairly limited (no completion feedback, double the
syscalls, only works with buffered IO, only works on some OSs).
b) Allow to use Direct-I/O (DIO).
DIO can offload most of the work for IO to hardware and thus increase
throughput / decrease CPU utilization, as well as reduce latency. While we
have gained the ability to configure DIO in d4e71df6, it is not yet usable
for real world workloads, as every IO is executed synchronously.
For portability, the new AIO infrastructure allows to implement AIO using
different methods. The choice of the AIO method is controlled by the new
io_method GUC. As of this commit, the only implemented method is "sync",
i.e. AIO is not actually executed asynchronously. The "sync" method exists to
allow to bypass most of the new code initially.
Subsequent commits will introduce additional IO methods, including a
cross-platform method implemented using worker processes and a linux specific
method using io_uring.
To allow different parts of postgres to use AIO, the core AIO infrastructure
does not need to know what kind of files it is operating on. The necessary
behavioral differences for different files are abstracted as "AIO
Targets". One example target would be smgr. For boring portability reasons,
all targets currently need to be added to an array in aio_target.c. This
commit does not implement any AIO targets, just the infrastructure for
them. The smgr target will be added in a later commit.
Completion (and other events) of IOs for one type of file (i.e. one AIO
target) need to be reacted to differently, based on the IO operation and the
callsite. This is made possible by callbacks that can be registered on
IOs. E.g. an smgr read into a local buffer does not need to update the
corresponding BufferDesc (as there is none), but a read into shared buffers
does. This commit does not contain any callbacks, they will be added in
subsequent commits.
For now the AIO infrastructure only understands READV and WRITEV operations,
but it is expected that more operations will be added. E.g. fsync/fdatasync,
flush_range and network operations like send/recv.
As of this commit, nothing uses the AIO infrastructure. Later commits will add
an smgr target, md.c and bufmgr.c callbacks and then finally use AIO for
read_stream.c IO, which, in one fell swoop, will convert all read stream users
to AIO.
The goal is to use AIO in many more places. There are patches to use AIO for
checkpointer and bgwriter that are reasonably close to being ready. There also
are prototypes to use it for WAL, relation extension, backend writes and many
more. Those prototypes were important to ensure the design of the AIO
subsystem is not too limiting (e.g. WAL writes need to happen in critical
sections, which influenced a lot of the design).
A future commit will add an AIO README explaining the AIO architecture and how
to use the AIO subsystem. The README is added later, as it references details
only added in later commits.
Many many more people than the folks named below have contributed with
feedback, work on semi-independent patches etc. E.g. various folks have
contributed patches to use the read stream infrastructure (added by Thomas in
b5a9b18cd0) in more places. Similarly, a *lot* of folks have contributed to
the CI infrastructure, which I had started to work on to make adding AIO
feasible.
Some of the work by contributors has gone into the "v1" prototype of AIO,
which heavily influenced the current design of the AIO subsystem. None of the
code from that directly survives, but without the prototype, the current
version of the AIO infrastructure would not exist.
Similarly, the reviewers below have not necessarily looked at the current
design or the whole infrastructure, but have provided very valuable input. I
am to blame for problems, not they.
Author: Andres Freund <andres@anarazel.de>
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Co-authored-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Co-authored-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Jakub Wartak <jakub.wartak@enterprisedb.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://postgr.es/m/uvrtrknj4kdytuboidbhwclo4gxhswwcpgadptsjvjqcluzmah%40brqs62irg4dt
Discussion: https://postgr.es/m/20210223100344.llw5an2aklengrmn@alap3.anarazel.de
Discussion: https://postgr.es/m/stj36ea6yyhoxtqkhpieia2z4krnam7qyetc57rfezgk4zgapf@gcnactj4z56m
This commit just does the minimal wiring up of the AIO subsystem, added in the
next commit, to the rest of the system. The next commit contains more details
about motivation and architecture.
This commit is kept separate to make it easier to review, separating the
changes across the tree, from the implementation of the new subsystem.
We discussed squashing this commit with the main commit before merging AIO,
but there has been a mild preference for keeping it separate.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/uvrtrknj4kdytuboidbhwclo4gxhswwcpgadptsjvjqcluzmah%40brqs62irg4dt
This reverts commit b860848232, that was added as a prerequisite for
the support of pgstats data flush across checkpoints, linking a pgstats
file to a specific checkpoint redo LSN.
As reported, this is proving to be currently problematic when going
through a pg_upgrade, that does direct manipulations of the control file
in the new cluster. The LSN stored in the pgstats file is not able to
cope with any changes done in the control file by pg_upgrade yet,
causing the pgstats file to be discarded when starting the new cluster
after overriding its redo LSN (one is a `pg_resetwal -l` where the new
cluster's start LSN is bumped by a hardcoded value of 8 segments, see
copy_xact_xlog_xid).
The least painful path going forward is likely going to be a refactor of
the pgstats code so as it is possible to read and write some of its data
with some routines in src/common/, so as pg_upgrade or pg_resetwal are
able to update its data. The main point is that we are going to need a
LSN in the stats file should we make it written at checkpoint time and
not only as part of a shutdown sequence. It is too late to dive into
these details for v18, so let's revert the change, and let's try to
figure out all the details in the next release cycle. The pgstats file
is currently only written as part of a shutdown sequence, and its
contents are still lost on crash, same as older releases.
Bump PGSTAT_FILE_FORMAT_ID.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2563883.1741826489@sss.pgh.pa.us
To initiate IO on a shared buffer we have StartBufferIO(). For temporary table
buffers no similar function exists - likely because the code for that
currently is very simple due to the lack of concurrency.
However, the upcoming AIO support will make it possible to re-encounter a
local buffer, while the buffer already is the target of IO. In that case we
need to wait for already in-progress IO to complete. This commit makes it
easier to add the necessary code, by introducing StartLocalBufferIO().
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CAAKRu_b9anbWzEs5AAF9WCvcEVmgz-1AkHSQ-CLLy-p7WHzvFw@mail.gmail.com
Previously we had two paths implementing writing out temporary table
buffers. For shared buffers, the logic for that is centralized in
FlushBuffer(). Introduce FlushLocalBuffer() to do the same for local buffers.
Besides being a nice cleanup on its own, it also makes an upcoming change
slightly easier.
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CAAKRu_b9anbWzEs5AAF9WCvcEVmgz-1AkHSQ-CLLy-p7WHzvFw@mail.gmail.com
Previously TerminateLocalBufferIO() was open-coded in multiple places, which
doesn't seem like a great idea. While TerminateLocalBufferIO() currently is
rather simple, an upcoming patch requires additional code to be added to
TerminateLocalBufferIO(), making this modification particularly worthwhile.
For some reason FlushRelationBuffers() previously cleared BM_JUST_DIRTIED,
even though that's never set for temporary buffers. This is not carried over
as part of this change.
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CAAKRu_b9anbWzEs5AAF9WCvcEVmgz-1AkHSQ-CLLy-p7WHzvFw@mail.gmail.com
Improve performance and reduce table sizes for case mapping.
The main case mapping table stores only 16-bit offsets, which can be
used to look up the mapped code point in any of the case tables (fold,
lower, upper, or title case). Simple case pairs point to the same
offsets.
Generate a function in generate-unicode_case_table.pl that consists of
a nested branches to test for specific codepoint ranges that determine
the offset in the main table.
Other approaches were considered, such as representing these ranges as
another structure (rather than branches in a generated function), or a
different approach such as a radix tree, or perfect hashing. The
author implemented and tested these alternatives and settled on the
generated branches.
Author: Alexander Borisov <lex.borisov@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/7cac7e66-9a3b-4e3f-a997-42aa0c401f80%40gmail.com
After pushing the bitmap iterator into table-AM specific code (as part
of making bitmap heap scan use the read stream API in 2b73a8cd33),
scan_bitmap_next_block() no longer returns the current block number.
Since scan_bitmap_next_block() isn't returning any relevant information
to bitmap table scan code, it makes more sense to get rid of it.
Now, bitmap table scan code only calls table_scan_bitmap_next_tuple(),
and the heap AM implementation of scan_bitmap_next_block() is a local
helper in heapam_handler.c.
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Discussion: https://postgr.es/m/flat/CAAKRu_ZwCwWFeL_H3ia26bP2e7HiKLWt0ZmGXPVwPO6uXq0vaA%40mail.gmail.com
Make Bitmap Heap Scan use the read stream API instead of invoking
ReadBuffer() for each block indicated by the bitmap.
The read stream API handles prefetching, so remove all of the explicit
prefetching from bitmap heap scan code.
Now, heap table AM implements a read stream callback which uses the
bitmap iterator to return the next required block to the read stream
code.
Tomas Vondra conducted extensive regression testing of this feature.
Andres Freund, Thomas Munro, and I analyzed regressions and Thomas Munro
patched the read stream API.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Tested-by: Tomas Vondra <tomas@vondra.me>
Tested-by: Andres Freund <andres@anarazel.de>
Tested-by: Thomas Munro <thomas.munro@gmail.com>
Tested-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/flat/CAAKRu_ZwCwWFeL_H3ia26bP2e7HiKLWt0ZmGXPVwPO6uXq0vaA%40mail.gmail.com
Remove the TBMIterateResult member from the TBMPrivateIterator and
TBMSharedIterator and make tbm_[shared|private_]iterate() take a
TBMIterateResult as a parameter.
This allows tidbitmap API users to manage multiple TBMIterateResults per
scan. This is required for bitmap heap scan to use the read stream API,
with which there may be multiple I/Os in flight at once, each one with a
TBMIterateResult.
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Discussion: https://postgr.es/m/d4bb26c9-fe07-439e-ac53-c0e244387e01%40vondra.me
This commit introduces a new GUC, log_lock_failure, which controls whether
a detailed log message is produced when a lock acquisition fails. Currently,
it only supports logging lock failures caused by SELECT ... NOWAIT.
The log message includes information about all processes holding or
waiting for the lock that couldn't be acquired, helping users analyze and
diagnose the causes of lock failures.
Currently, this option does not log failures from SELECT ... SKIP LOCKED,
as that could generate excessive log messages if many locks are skipped,
causing unnecessary noise.
This mechanism can be extended in the future to support for logging
lock failures from other commands, such as LOCK TABLE ... NOWAIT.
Author: Yuki Seino <seinoyu@oss.nttdata.com>
Co-authored-by: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Discussion: https://postgr.es/m/411280a186cc26ef7034e0f2dfe54131@oss.nttdata.com
PrepareSortSupportFromIndexRel() was accepting btree strategy numbers
purely for the purpose of comparing it later against btree strategies
to determine if the sort direction was forward or reverse. Change
that. Instead, pass a bool directly, to indicate the same without an
unfortunate assumption that a strategy number refers specifically to a
btree strategy. (This is similar in spirit to commits 0d2aa4d493 and
c594f1ad2ba.)
(This could arguably be simplfied further by having the callers fill
in ssup_reverse directly. But this way, it preserves consistency by
having all PrepareSortSupport*() variants be responsible for filling
in ssup_reverse.)
Moreover, remove the hardcoded check against BTREE_AM_OID, and check
against amcanorder instead, which is the actual requirement.
Co-authored-by: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
When pg_nodiscard was first added, the C standard draft had it as a
function specifier, and so the code comment about placement was
written with that in mind. The final C23 standard has it as an
attribute and the placement rules are a bit different for that.
Specifically, it needs to be before extern or static. (Or at least
both current clang and gcc require that.) So just swap these. (To be
clear: The current implementation with gcc attributes doesn't care.
This change is just for maximum forward compatibility for non-gcc
compilers.) This also keeps the order consistent with the previously
introduced pg_noreturn. Also update the code comment to reflect the
mentioned developments since its introduction.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/pxr5b3z7jmkpenssra5zroxi7qzzp6eswuggokw64axmdixpnk@zbwxuq7gbbcw
Previously the support functions assumed that the caller needed one pin
to make progress, and could optionally use some more, allowing enough
for every connection to do the same. Add a couple more functions for
callers that want to know:
* what the maximum possible number could be, irrespective of currently
held pins, for space planning purposes
* how many additional pins they could acquire right now, without the
special case allowing one pin, for callers that already hold pins and
could already make progress even if no extra pins are available
The pin limit logic began in commit 31966b15. This refactoring is
better suited to read_stream.c, which will be adjusted to respect the
remaining limit as it changes over time in a follow-up commit. It also
computes MaxProportionalPins up front, to avoid performing divisions
whenever a caller needs to check the balance.
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions)
Discussion: https://postgr.es/m/CA%2BhUKGK_%3D4CVmMHvsHjOVrK6t4F%3DLBpFzsrr3R%2BaJYN8kcTfWg%40mail.gmail.com
We want to support a "noreturn" decoration on more compilers besides
just GCC-compatible ones, but for that we need to move the decoration
in front of the function declaration instead of either behind it or
wherever, which is the current style afforded by GCC-style attributes.
Also rename the macro to "pg_noreturn" to be similar to the C11
standard "noreturn".
pg_noreturn is now supported on all compilers that support C11 (using
_Noreturn), as well as GCC-compatible ones (using __attribute__, as
before), as well as MSVC (using __declspec). (When PostgreSQL
requires C11, the latter two variants can be dropped.)
Now, all supported compilers effectively support pg_noreturn, so the
extra code for !HAVE_PG_ATTRIBUTE_NORETURN can be dropped.
This also fixes a possible problem if third-party code includes
stdnoreturn.h, because then the current definition of
#define pg_attribute_noreturn() __attribute__((noreturn))
would cause an error.
Note that the C standard does not support a noreturn attribute on
function pointer types. So we have to drop these here. There are
only two instances at this time, so it's not a big loss. In one case,
we can make up for it by adding the pg_noreturn to a wrapper function
and adding a pg_unreachable(), in the other case, the latter was
already done before.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/pxr5b3z7jmkpenssra5zroxi7qzzp6eswuggokw64axmdixpnk@zbwxuq7gbbcw
On Publication rename, we need to only invalidate the RelationSyncCache
entries corresponding to relations that are part of the publication being
renamed.
As part of this patch, we introduce a new invalidation message to
invalidate the cache maintained by the logical decoding output plugin. We
can't use existing relcache invalidation for this purpose, as that would
unnecessarily cause relcache invalidations in other backends.
This will improve performance by building fewer relation cache entries
during logical replication.
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/OSCPR01MB14966C09AA201EFFA706576A7F5C92@OSCPR01MB14966.jpnprd01.prod.outlook.com
This commit enhances pg_rewind's --write-recovery-conf option to
include the dbname in the generated primary_conninfo value when
specified in the --source-server option. With this modification, the
rewound server can connect to the primary server without manual
configuration file modifications when sync_replication_slots is
enabled.
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/CAD21AoAkW=Ht0k9dVoBTCcqLiiZ2MXhVr+d=j2T_EZMerGrLWQ@mail.gmail.com
There used to be bespoken pools for these structs to reduce the
palloc/pfree overhead, but that was ripped out a long time ago and
replaced with the generic, cheaper generational memory allocator
(commit a4ccc1cef5). The Get/Return terminology made sense with the
pools, as you "got" an object from the pool and "returned" it later,
but now it just looks weird. Rename to Alloc/Free.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/c9e43d2d-8e83-444f-b111-430377368989@iki.fi
Add log_connections option 'setup_durations' which logs durations of
several key parts of connection establishment and backend setup.
For an incoming connection, starting from when the postmaster gets a
socket from accept() and ending when the forked child backend is first
ready for query, there are multiple steps that could each take longer
than expected due to external factors. This logging provides visibility
into authentication and fork duration as well as the end-to-end
connection establishment and backend initialization time.
To make this portable, the timings captured in the postmaster (socket
creation time, fork initiation time) are passed through the
BackendStartupData.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Guillaume Lelarge <guillaume.lelarge@dalibo.com>
Discussion: https://postgr.es/m/flat/CAAKRu_b_smAHK0ZjrnL5GRxnAVWujEXQWpLXYzGbmpcZd3nLYw%40mail.gmail.com
Convert the boolean log_connections GUC into a list GUC comprised of the
connection aspects to log.
This gives users more control over the volume and kind of connection
logging.
The current log_connections options are 'receipt', 'authentication', and
'authorization'. The empty string disables all connection logging. 'all'
enables all available connection logging.
For backwards compatibility, the most common values for the
log_connections boolean are still supported (on, off, 1, 0, true, false,
yes, no). Note that previously supported substrings of on, off, true,
false, yes, and no are no longer supported.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/flat/CAAKRu_b_smAHK0ZjrnL5GRxnAVWujEXQWpLXYzGbmpcZd3nLYw%40mail.gmail.com
Previously, pg_logicalinspect functions were too trusting of their
input and blindly passed it to SnapBuildRestoreSnapshot(). If the
input pointed to a directory, the server could a PANIC error while
attempting to fsync_fname() with isdir=false on a directory.
This commit adds validation checks for input filenames and passes the
LSN extracted from the filename to SnapBuildRestoreSnapshot() instead
of the filename itself. It also adds regression tests for various
input patterns and permission checks.
Bug: #18828
Reported-by: Robins Tharakan <tharakan@gmail.com>
Co-authored-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Co-authored-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/18828-0f4701c635064211@postgresql.org
Up to now we just punted on showing the window definitions used
in a plan, with window function calls represented as "OVER (?)".
To improve that, show the window definition implemented by each
WindowAgg plan node, and reference their window names in OVER.
For nameless window clauses generated by "OVER (...)", assign
unique names w1, w2, etc.
In passing, re-order the properties shown for a WindowAgg node
so that the Run Condition (if any) appears after the Window
property and before the Filter (if any). This seems more
sensible since the Run Condition is associated with the Window
and acts before the Filter.
Thanks to David G. Johnston and Álvaro Herrera for design
suggestions.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/144530.1741469955@sss.pgh.pa.us
Make nbtree's "1/3 of a page limit" BTMaxItemSize function-like macro
(which accepts a "page" argument) into an object-like macro that can be
used from code that doesn't have convenient access to an nbtree page.
Preparation for an upcoming patch that adds skip scan to nbtree.
Parallel index scans that use skip scan will serialize datums (not just
SAOP array subscripts) when scheduling primitive scans. BTMaxItemSize
will be used by btestimateparallelscan to determine how much DSM to
request.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wz=H_RG5weNGeUG_TkK87tRBnH9mGCQj6WpM4V4FNWKv2g@mail.gmail.com
Expose the count of index searches/index descents in EXPLAIN ANALYZE's
output for index scan/index-only scan/bitmap index scan nodes. This
information is particularly useful with scans that use ScalarArrayOp
quals, where the number of index searches can be unpredictable due to
implementation details that interact with physical index characteristics
(at least with nbtree SAOP scans, since Postgres 17 commit 5bf748b8).
The information shown also provides useful context when EXPLAIN ANALYZE
runs a plan with an index scan node that successfully applied the skip
scan optimization (set to be added to nbtree by an upcoming patch).
The instrumentation works by teaching all index AMs to increment a new
nsearches counter whenever a new index search begins. The counter is
incremented at exactly the same point that index AMs already increment
the pg_stat_*_indexes.idx_scan counter (we're counting the same event,
but at the scan level rather than the relation level). Parallel queries
have workers copy their local counter struct into shared memory when an
index scan node ends -- even when it isn't a parallel aware scan node.
An earlier version of this patch that only worked with parallel aware
scans became commit 5ead85fb (though that was quickly reverted by commit
d00107cd following "debug_parallel_query=regress" buildfarm failures).
Our approach doesn't match the approach used when tracking other index
scan related costs (e.g., "Rows Removed by Filter:"). It is comparable
to the approach used in similar cases involving costs that are only
readily accessible inside an access method, not from the executor proper
(e.g., "Heap Blocks:" output for a Bitmap Heap Scan, which was recently
enhanced to show per-worker costs by commit 5a1e6df3, using essentially
the same scheme as the one used here). It is necessary for index AMs to
have direct responsibility for maintaining the new counter, since the
counter might need to be incremented multiple times per amgettuple call
(or per amgetbitmap call). But it is also necessary for the executor
proper to manage the shared memory now used to transfer each worker's
counter struct to the leader.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Tomas Vondra <tomas@vondra.me>
Reviewed-By: Masahiro Ikeda <ikedamsh@oss.nttdata.com>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkRqvaqR2CTNqTZP0z6FuL4-3ED6eQB0yx38XBNj1v-4Q@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-Wz=PKR6rB7qbx+Vnd7eqeB5VTcrW=iJvAsTsKbdG+kW_UA@mail.gmail.com
Many STRICT function calls will have one or two arguments, in which
case we can speed up checking for NULL input by avoiding setting up
a loop over the arguments. This adds EEOP_FUNCEXPR_STRICT_1 and the
corresponding EEOP_FUNCEXPR_STRICT_2 for functions with one and two
arguments respectively.
Author: Andres Freund <andres@anarazel.de>
Co-authored-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Discussion: https://postgr.es/m/415721CE-7D2E-4B74-B5D9-1950083BA03E@yesql.se
Discussion: https://postgr.es/m/20191023163849.sosqbfs5yenocez3@alap3.anarazel.de
Knowing when the side-effects of an expression is the intended result
of the execution, rather than the returnvalue, is important for being
able generate more efficient JITed code. This replaces EEOP_DONE with
two new steps: EEOP_DONE_RETURN and EEOP_DONE_NO_RETURN. Expressions
which return a value should use the former step; expressions used for
their side-effects which don't return value should use the latter.
Author: Andres Freund <andres@anarazel.de>
Co-authored-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Discussion: https://postgr.es/m/415721CE-7D2E-4B74-B5D9-1950083BA03E@yesql.se
Discussion: https://postgr.es/m/20191023163849.sosqbfs5yenocez3@alap3.anarazel.de
This commit adds per-backend WAL statistics, providing the same
information as pg_stat_wal, except that it is now possible to know how
much WAL activity is happening in each backend rather than an overall
aggregate of all the activity. Like pg_stat_wal, the implementation
relies on pgWalUsage, tracking the difference of activity between two
reports to pgstats.
This data can be retrieved with a new system function called
pg_stat_get_backend_wal(), that returns one tuple based on the PID
provided in input. Like pg_stat_get_backend_io(), this is useful when
joined with pg_stat_activity to get a live picture of the WAL generated
for each running backend, showing how the activity is [un]balanced.
pgstat_flush_backend() gains a new flag value, able to control the flush
of the WAL stats.
This commit relies mostly on the infrastructure provided by
9aea73fc61, that has introduced backend statistics.
Bump catalog version. A bump of PGSTAT_FILE_FORMAT_ID is not required,
as backend stats do not persist on disk.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/Z3zqc4o09dM/Ezyz@ip-10-97-1-34.eu-west-3.compute.internal
Recognizing the real-life complexity where columns in the table often have
functional dependencies, PostgreSQL's estimation of the number of distinct
values over a set of columns can be underestimated (or much rarely,
overestimated) when dealing with multi-clause JOIN. In the case of hash
join, it can end up with a small number of predicted hash buckets and, as
a result, picking non-optimal merge join.
To improve the situation, we introduce one additional stage of bucket size
estimation - having two or more join clauses estimator lookup for extended
statistics and use it for multicolumn estimation. Clauses are grouped into
lists, each containing expressions referencing the same relation. The result
of the multicolumn estimation made over such a list is combined with others
according to the caller's logic. Clauses that are not estimated are returned
to the caller for further estimation.
Discussion: https://postgr.es/m/52257607-57f6-850d-399a-ec33a654457b%40postgrespro.ru
Author: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Andy Fan <zhihui.fan1213@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Alena Rybakina <lena.ribackina@yandex.ru>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Teach parallel nbtree index scans to use an LWLock (not a spinlock) to
protect the scan's shared descriptor state.
Preparation for an upcoming patch that will add skip scan optimizations
to nbtree. That patch will create the need to occasionally allocate
memory while the scan descriptor is locked, while copying datums that
were serialized by another backend.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=PKR6rB7qbx+Vnd7eqeB5VTcrW=iJvAsTsKbdG+kW_UA@mail.gmail.com
After more discussion about commit ce62f2f2a0, rename the index AM
property amcancrosscompare to two separate properties
amconsistentequality and amconsistentordering. Also improve the
documentation and update some comments that were previously missed.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/E1tngY6-0000UL-2n%40gemulon.postgresql.org
This allows smallint, integer, and bigint values to be cast to and
from bytea. The bytea value is the two's complement representation of
the integer, with the most significant byte first. For example:
1234::bytea -> \x000004d2
(-1234)::bytea -> \xfffffb2e
Author: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Joel Jacobson <joel@compiler.org>
Reviewed-by: Yugo Nagata <nagata@sraoss.co.jp>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/CAJ7c6TPtOp6%2BkFX5QX3fH1SVr7v65uHr-7yEJ%3DGMGQi5uhGtcA%40mail.gmail.com
Clang with -Wtypedef-redefinition produced warnings:
src/include/storage/latch.h:122:3: error: redefinition of typedef 'Latch' is a C11 feature [-Werror,-Wtypedef-redefinition]
Per buildfarm
This reverts commit 5ead85fbc8.
This commit shows test failures with debug_parallel_query=regress. The
underlying issue needs to be debugged, so revert for now.
An additional paramater ("strip_in_arrays") is added to these functions.
It defaults to false. If true, then null array elements are removed as
well as null valued object fields. JSON that just consists of a single
null is not affected.
Author: Florents Tselai <florents.tselai@gmail.com>
Discussion: https://postgr.es/m/4BCECCD5-4F40-4313-9E98-9E16BEB0B01D@gmail.com
Expose the count of index searches/index descents in EXPLAIN ANALYZE's
output for index scan nodes. This information is particularly useful
with scans that use ScalarArrayOp quals, where the number of index scans
isn't predictable in advance (at least not with optimizations like the
one added to nbtree by Postgres 17 commit 5bf748b8). It will also be
useful when EXPLAIN ANALYZE shows details of an nbtree index scan that
uses skip scan optimizations set to be introduced by an upcoming patch.
The instrumentation works by teaching index AMs to increment a new
nsearches counter whenever a new index search begins. The counter is
incremented at exactly the same point that index AMs must already
increment the index's pg_stat_*_indexes.idx_scan counter (we're counting
the same event, but at the scan level rather than the relation level).
The new counter is stored in the scan descriptor (IndexScanDescData),
which explain.c reaches by going through the scan node's PlanState.
This approach doesn't match the approach used when tracking other index
scan specific costs (e.g., "Rows Removed by Filter:"). It is similar to
the approach used in other cases where we must track costs that are only
readily accessible inside an access method, and not from the executor
(e.g., "Heap Blocks:" output for a Bitmap Heap Scan). It is inherently
necessary to maintain a counter that can be incremented multiple times
during a single amgettuple call (or amgetbitmap call), and directly
exposing PlanState.instrument to index access methods seems unappealing.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Tomas Vondra <tomas@vondra.me>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Masahiro Ikeda <ikedamsh@oss.nttdata.com>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=PKR6rB7qbx+Vnd7eqeB5VTcrW=iJvAsTsKbdG+kW_UA@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzkRqvaqR2CTNqTZP0z6FuL4-3ED6eQB0yx38XBNj1v-4Q@mail.gmail.com
The usual pattern for handling a signal is that the signal handler
sets a flag and calls SetLatch(MyLatch), and CHECK_FOR_INTERRUPTS() or
other code that is part of a wait loop calls another function to deal
with it. The naming of the functions involved was a bit inconsistent,
however. CHECK_FOR_INTERRUPTS() calls ProcessInterrupts() to do the
heavy-lifting, but the analogous functions in aux processes were
called HandleMainLoopInterrupts(), HandleStartupProcInterrupts(),
etc. Similarly, most subroutines of ProcessInterrupts() were called
Process*(), but some were called Handle*().
To make things less confusing, rename all the functions that are part
of the overall signal/interrupt handling system but are not executed
in a signal handler to e.g. ProcessSomething(), rather than
HandleSomething(). The "Process" prefix is now consistently used in
the non-signal-handler functions, and the "Handle" prefix in functions
that are part of signal handlers, except for some completely unrelated
functions that clearly have nothing to do with signal or interrupt
handling.
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://www.postgresql.org/message-id/8a384b26-1499-41f6-be33-64b801fb98b8@iki.fi
This allows to redefine an existing non-inheritable constraint to be
inheritable, which allows to straighten up situations with NO INHERIT
constraints so that thay can become normal constraints without having to
re-verify existing data. For existing inheritance children this may
require creating additional constraints, if they don't exist already.
It also allows to do the opposite, if only for symmetry.
Author: Suraj Kharage <suraj.kharage@enterprisedb.com>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CAF1DzPVfOW6Kk=7SSh7LbneQDJWh=PbJrEC_Wkzc24tHOyQWGg@mail.gmail.com
The FP_LOCK_SLOTS_PER_BACKEND macro looks like a constant, but it
depends on the max_locks_per_transaction GUC, and thus can change. This
is non-obvious and confusing, so make it look more like a function by
renaming it to FastPathLockSlotsPerBackend().
While at it, use the macro when initializing fast-path shared memory,
instead of using the formula.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/ffiwtzc6vedo6wb4gbwelon5nefqg675t5c7an2ta7pcz646cg%40qwmkdb3l4ett
pgstat_bestart(), used post-authentication to set up a backend entry
in the PgBackendStatus array, so as its data becomes visible in
pg_stat_activity and related catalogs, has its logic divided into three
routines with this commit, called in order at different steps of the
backend initialization:
* pgstat_bestart_initial() sets up the backend entry with a minimal
amount of information, reporting it with a new BackendState called
STATE_STARTING while waiting for backend initialization and client
authentication to complete. The main benefit that this offers is
observability, so as it is possible to monitor the backend activity
during authentication. This step happens earlier than in the logic
prior to this commit. pgstat_beinit() happens earlier as well, before
authentication.
* pgstat_bestart_security() reports the SSL/GSS status of the
connection, once authentication completes. Auxiliary processes, for
example, do not need to call this step, hence it is optional. This
step is called after performing authentication, same as previously.
* pgstat_bestart_final() reports the user and database IDs, takes the
entry out of STATE_STARTING, and reports its application_name. This is
called as the last step of the three, once authentication completes.
An injection point is added, with a test checking that the "starting"
phase of a backend entry is visible in pg_stat_activity. Some follow-up
patches are planned to take advantage of this refactoring with more
information provided in backend entries during authentication (LDAP
hanging was a problem for the author, initially).
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAOYmi+=60deN20WDyCoHCiecgivJxr=98s7s7-C8SkXwrCfHXg@mail.gmail.com
StoreAttrDefault() is no longer responsible for filling
attmissingval, so remove the code for that.
Get rid of RawColumnDefault.missingMode, too, as we no longer
need that to pass information around.
While here, clean up some sloppy coding in StoreAttrDefault(),
such as failure to use XXXGetDatum macros. These aren't bugs
but they're not good code either.
Reported-by: jian he <jian.universality@gmail.com>
Author: jian he <jian.universality@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CACJufxHFssPvkP1we7WMhPD_1kwgbG52o=kQgL+TnVoX5LOyCQ@mail.gmail.com
If a domain type has a default, adding a column of that type (without
any explicit DEFAULT clause) failed to install the domain's default
value in existing rows, instead leaving the new column null. This
is unexpected, and it used to work correctly before v11. The cause
is confusion in the atthasmissing mechanism about which default value
to install: we'd only consider installing an explicitly-specified
default, and then we'd decide that no table rewrite is needed.
To fix, take the responsibility for filling attmissingval out of
StoreAttrDefault, and instead put it into ATExecAddColumn's existing
logic that derives the correct value to fill the new column with.
Also, centralize the logic that determines the need for
default-related table rewriting there, instead of spreading it over
four or five places.
In the back branches, we'll leave the attmissingval-filling code
in StoreAttrDefault even though it's now dead, for fear that some
extension may be depending on that functionality to exist there.
A separate HEAD-only patch will clean up the now-useless code.
Reported-by: jian he <jian.universality@gmail.com>
Author: jian he <jian.universality@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CACJufxHFssPvkP1we7WMhPD_1kwgbG52o=kQgL+TnVoX5LOyCQ@mail.gmail.com
Backpatch-through: 13
Add relallfrozen, an estimate of the number of pages marked all-frozen
in the visibility map.
pg_class already has relallvisible, an estimate of the number of pages
in the relation marked all-visible in the visibility map. This is used
primarily for planning.
relallfrozen, together with relallvisible, is useful for estimating the
outstanding number of all-visible but not all-frozen pages in the
relation for the purposes of scheduling manual VACUUMs and tuning vacuum
freeze parameters.
A future commit will use relallfrozen to trigger more frequent vacuums
on insert-focused workloads with significant volume of frozen data.
Bump catalog version
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Robert Treat <rob@xzilla.net>
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Greg Sabino Mullane <htamfids@gmail.com>
Discussion: https://postgr.es/m/flat/CAAKRu_aj-P7YyBz_cPNwztz6ohP%2BvWis%3Diz3YcomkB3NpYA--w%40mail.gmail.com
Allow using parallel workers to build a GIN index, similarly to BTREE
and BRIN. For large tables this may result in significant speedup when
the build is CPU-bound.
The work is divided so that each worker builds index entries on a subset
of the table, determined by the regular parallel scan used to read the
data. Each worker uses a local tuplesort to sort and merge the entries
for the same key. The TID lists do not overlap (for a given key), which
means the merge sort simply concatenates the two lists. The merged
entries are written into a shared tuplesort for the leader.
The leader needs to merge the sorted entries again, before writing them
into the index. But this way a significant part of the work happens in
the workers, and the leader is left with merging fewer large entries,
which is more efficient.
Most of the parallelism infrastructure is a simplified copy of the code
used by BTREE indexes, omitting the parts irrelevant for GIN indexes
(e.g. uniqueness checks).
Original patch by me, with reviews and substantial improvements by
Matthias van de Meent, certainly enough to make him a co-author.
Author: Tomas Vondra, Matthias van de Meent
Reviewed-by: Matthias van de Meent, Andy Fan, Kirill Reshke
Discussion: https://postgr.es/m/6ab4003f-a8b8-4d75-a67f-f25ad98582dc%40enterprisedb.com
Commit 7717f63006 removed NextCopyFromRawFields() from copy.h. While
it was hoped that NextCopyFrom() could serve as an alternative,
certain use cases still require NextCopyFromRawFields(). For instance,
extensions like file_text_array_fdw, which process source data with an
unknown number of columns, rely on this function.
Per buildfarm member crake.
Reported-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Sutou Kouhei <kou@clear-code.com>
Discussion: https://postgr.es/m/5c7e1ac8-5083-4c08-af19-cb9ade2f16ce@dunslane.net
