Fix assorted places that had not bothered with the convention of
prefixing catalog and function names with "pg_catalog.". That
could possibly result in query failure when running with a nondefault
search_path. Also fix two places that weren't quoting OID literals.
I think the latter hasn't mattered much since about 7.3, but it's still
a bad idea to be doing it in 99 places and not in 2 others.
Also remove a useless EXISTS sub-select that someone had stuck into
describeOneTableDetails' queries for child tables. We just got the OID
out of pg_class, so I hardly see how checking that it exists in pg_class
was doing anything helpful.
In passing, try to improve the emitted formatting of a couple of
these queries, though I didn't work really hard on that. And merge
unnecessarily duplicative coding in some other places.
Much of this was new in HEAD, but some was quite old; back-patch
as appropriate.
When writing a backup to stdout with pg_basebackup on Windows, put stdout
to binary mode. Any CR bytes in the output will otherwise be output
incorrectly as CR+LF.
In the passing, standardize on using "_setmode" instead of "setmode", for
the sake of consistency. They both do the same thing, but according to
MSDN documentation, setmode is deprecated.
Fixes bug #14634, reported by Henry Boehlert. Patch by Haribabu Kommi.
Backpatch to all supported versions.
Discussion: https://www.postgresql.org/message-id/20170428082818.24366.13134@wrigleys.postgresql.org
The combination of -Z -Fp and output to stdout resulted in corrupted
output data, because we left stdout in text mode, resulting in newline
conversion being done on the compressed stream. Switch stdout to binary
mode for this case, at the same place where we do it for non-text output
formats.
Report and patch by Kuntal Ghosh, tested by Ashutosh Sharma and Neha
Sharma. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAGz5QCJPvbBjXAmJuGx1B_41yVCetAJhp7rtaDf7XQGWuB1GSw@mail.gmail.com
pg_resetwal (formerly pg_resetxlog) doesn't insist on finding a matching
version number in pg_control, and that seems like an important thing to
preserve since recovering from corrupt pg_control is a prime reason to
need to run it. However, that means you can try to run it against a
data directory of a different major version, which is at best useless
and at worst disastrous. So as to provide some protection against that
type of pilot error, inspect PG_VERSION at startup and refuse to do
anything if it doesn't match. PG_VERSION is read-only after initdb,
so it's unlikely to get corrupted, and even if it were corrupted it would
be easy to fix by hand.
This hazard has been there all along, so back-patch to all supported
branches.
Michael Paquier, with some kibitzing by me
Discussion: https://postgr.es/m/f4b8eb91-b934-8a0d-b3cc-68f06e2279d1@enterprisedb.com
If an operator class has no operators or functions, and doesn't need
a STORAGE clause, we emitted "CREATE OPERATOR CLASS ... AS ;" which
is syntactically invalid. Fix by forcing a STORAGE clause to be
emitted anyway in this case.
(At some point we might consider changing the grammar to allow CREATE
OPERATOR CLASS without an opclass_item_list. But probably we'd want to
omit the AS in that case, so that wouldn't fix this pg_dump issue anyway.)
It's been like this all along, so back-patch to all supported branches.
Daniel Gustafsson, tweaked by me to avoid a dangling-pointer bug
Discussion: https://postgr.es/m/D9E5FC64-7A37-4F3D-B946-7E4FB468F88A@yesql.se
When stdin is a terminal, it's possible to end a COPY FROM STDIN with
a keyboard EOF signal (typically control-D), and then keep on issuing
SQL commands. One would expect another COPY FROM STDIN to work as well,
but on some platforms it did not. This turns out to be because we were
not resetting the stream's feof() flag, and BSD-ish versions of fread()
and fgets() won't attempt to read more data if that's set.
The misbehavior is observed on BSDen (including macOS), but not Linux,
Windows, or SysV-ish Unixen, which makes this a portability bug not
just a missing feature.
Add a clearerr() call to fix the behavior, and improve the prompt that's
issued when copying from a TTY to mention that EOF signals work.
It's been like this forever, so back-patch to all supported branches.
Thomas Munro
Discussion: https://postgr.es/m/CAEepm=0MCGfYf=JAMiYhO6JPtv9-3ZfBo8fcGeCZ8oMzaw+Z+Q@mail.gmail.com
Commits 89e0bac86 et al replaced newlines with spaces in object names
printed in SQL comments, but we neglected to consider that the same
names are also printed by "pg_restore -l", and a newline would render
the output unparseable by "pg_restore -L". Apply the same replacement
in "-l" output. Since "pg_restore -L" doesn't actually examine any
object names, only the dump ID field that starts each line, this is
enough to fix things for its purposes.
The previous fix was treated as a security issue, and we might have
done that here as well, except that the issue was reported publicly
to start with. Anyway it's hard to see how this could be exploited
for SQL injection; "pg_restore -L" doesn't do much with the file
except parse it for leading integers.
Per bug #14587 from Milos Urbanek. Back-patch to all supported versions.
Discussion: https://postgr.es/m/20170310155318.1425.30483@wrigleys.postgresql.org
We attached no schema label to comments for procedural languages, casts,
transforms, operator classes, operator families, or text search objects.
The first three categories of objects don't really have schemas, but
pg_dump treats them as if they do, and it seems like the TocEntry fields
for their comments had better match the TocEntry fields for the parent
objects. (As an example of a possible hazard, the type names in a CAST
will be formatted with the assumption of a particular search_path, so
failing to ensure that this same path is active for the COMMENT ON command
could lead to an error or to attaching the comment to the wrong cast.)
In the last six cases, this was a flat-out error --- possibly mine to
begin with, but it was a long time ago.
The security label for a procedural language was likewise not correctly
labeled as to schema, and both the comment and security label for a
procedural language were not correctly labeled as to owner.
In simple cases the restore would accidentally work correctly anyway, since
these comments and security labels would normally get emitted right after
the owning object, and so the search path and active user would be correct
anyhow. But it could fail in corner cases; for example a schema-selective
restore would omit comments it should include.
Giuseppe Broccolo noted the oversight, and proposed the correct fix, for
text search dictionary objects; I found the rest by cross-checking other
dumpComment() calls. These oversights are ancient, so back-patch all
the way.
Discussion: https://postgr.es/m/CAFzmHiWwwzLjzwM4x5ki5s_PDMR6NrkipZkjNnO3B0xEpBgJaA@mail.gmail.com
When performing a pg_upgrade, we copy the files behind pg_largeobject
and pg_largeobject_metadata, allowing us to avoid having to dump out and
reload the actual data for large objects and their ACLs.
Unfortunately, that isn't all of the information which can be associated
with large objects. Currently, we also support COMMENTs and SECURITY
LABELs with large objects and these were being silently dropped during a
pg_upgrade as pg_dump would skip everything having to do with a large
object and pg_upgrade only copied the tables mentioned to the new
cluster.
As the file copies happen after the catalog dump and reload, we can't
simply include the COMMENTs and SECURITY LABELs in pg_dump's binary-mode
output but we also have to include the actual large object definition as
well. With the definition, comments, and security labels in the pg_dump
output and the file copies performed by pg_upgrade, all of the data and
metadata associated with large objects is able to be successfully pulled
forward across a pg_upgrade.
In 9.6 and master, we can simply adjust the dump bitmask to indicate
which components we don't want. In 9.5 and earlier, we have to put
explciit checks in in dumpBlob() and dumpBlobs() to not include the ACL
or the data when in binary-upgrade mode.
Adjustments made to the privileges regression test to allow another test
(large_object.sql) to be added which explicitly leaves a large object
with a comment in place to provide coverage of that case with
pg_upgrade.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/20170221162655.GE9812@tamriel.snowman.net
pg_restore will currently accept invalid values for the number of
parallel jobs to run (eg: -1), unlike pg_dump which does check that the
value provided is reasonable.
Worse, '-1' is actually a valid, independent, parameter (as an alias for
--single-transaction), leading to potentially completely unexpected
results from a command line such as:
-> pg_restore -j -1
Where a user would get neither parallel jobs nor a single-transaction.
Add in validity checking of the parallel jobs option, as we already have
in pg_dump, before we try to open up the archive. Also move the check
that we haven't been asked to run more parallel jobs than possible on
Windows to the same place, so we do all the option validity checking
before opening the archive.
Back-patch all the way, though for 9.2 we're adding the Windows-specific
check against MAXIMUM_WAIT_OBJECTS as that check wasn't back-patched
originally.
Discussion: https://www.postgresql.org/message-id/20170110044815.GC18360%40tamriel.snowman.net
The -v/--verbose option was not included in the output from --help for
pg_dumpall even though it's in the pg_dumpall documentation and has
apparently been around since pg_dumpall was reimplemented in C in 2002.
Fix that by adding it.
Pointed out by Daniel Westermann.
Back-patch to all supported branches.
Discussion: https://www.postgresql.org/message-id/2020970042.4589542.1482482101585.JavaMail.zimbra%40dbi-services.com
When providing tab completion for ALTER DEFAULT PRIVILEGES, we are
including the list of roles as possible options for completion after the
GRANT or REVOKE. Further, we accept FOR ROLE/IN SCHEMA at the same time
and in either order, but the tab completion was only working for one or
the other. Lastly, we weren't using the actual list of allowed kinds of
objects for default privileges for completion after the 'GRANT X ON' but
instead were completeing to what 'GRANT X ON' supports, which isn't the
ssame at all.
Address these issues by improving the forward tab-completion for ALTER
DEFAULT PRIVILEGES and then constrain and correct how the tail
completion is done when it is for ALTER DEFAULT PRIVILEGES.
Back-patch the forward/tail tab-completion to 9.6, where we made it easy
to handle such cases.
For 9.5 and earlier, correct the initial tab-completion to at least be
correct as far as it goes and then add a check for GRANT/REVOKE to only
tab-complete when the GRANT/REVOKE is the start of the command, so we
don't try to do tab-completion after we get to the GRANT/REVOKE part of
the ALTER DEFAULT PRIVILEGES command, which is better than providing
incorrect completions.
Initial patch for master and 9.6 by Gilles Darold, though I cleaned it
up and added a few comments. All bugs in the 9.5 and earlier patch are
mine.
Discussion: https://www.postgresql.org/message-id/1614593c-e356-5b27-6dba-66320a9bc68b@dalibo.com
In pg_dump.c dumpCast() and dumpTransform(), we would happily ignore the
cast or transform if it happened to use a built-in function because we
weren't including the information about built-in functions when querying
pg_proc from getFuncs().
Modify the query in getFuncs() to also gather information about
functions which are used by user-defined casts and transforms (where
"user-defined" means "has an OID >= FirstNormalObjectId"). This also
adds to the TAP regression tests for 9.6 and master to cover these
types of objects.
Back-patch all the way for casts, back to 9.5 for transforms.
Discussion: https://www.postgresql.org/message-id/flat/20160504183952.GE10850%40tamriel.snowman.net
We didn't start ensuring that all built-in objects had OIDs less than
16384 until 8.1, so for 8.0 servers we still need to query the value out
of pg_database. We need this, in particular, to distinguish which casts
were built-in and which were user-defined.
For HEAD, we only worry about going back to 8.0, for the back-branches,
we also ensure that 7.0-7.4 work.
Discussion: https://www.postgresql.org/message-id/flat/20160504183952.GE10850%40tamriel.snowman.net
Ancient oversight in PageOutput(): if popen() fails, we'd better reset
the SIGPIPE handler before returning stdout, because ClosePager() won't.
Noticed while fixing the empty-PAGER issue.
If the PAGER environment variable is set but contains an empty string,
psql would pass it to "sh" which would silently exit, causing whatever
query output we were printing to vanish entirely. This is quite
mystifying; it took a long time for us to figure out that this was the
cause of Joseph Brenner's trouble report. Rather than allowing that
to happen, we should treat this as another way to specify "no pager".
(We could alternatively treat it as selecting the default pager, but
it seems more likely that the former is what the user meant to achieve
by setting PAGER this way.)
Nonempty, but all-white-space, PAGER values have the same behavior, and
it's pretty easy to test for that, so let's handle that case the same way.
Most other cases of faulty PAGER values will result in the shell printing
some kind of complaint to stderr, which should be enough to diagnose the
problem, so we don't need to work harder than this. (Note that there's
been an intentional decision not to be very chatty about apparent failure
returns from the pager process, since that may happen if, eg, the user
quits the pager with control-C or some such. I'd just as soon not start
splitting hairs about which exit codes might merit making our own report.)
libpq's old PQprint() function was already on board with ignoring empty
PAGER values, but for consistency, make it ignore all-white-space values
as well.
It's been like this a long time, so back-patch to all supported branches.
Discussion: https://postgr.es/m/CAFfgvXWLOE2novHzYjmQK8-J6TmHz42G8f3X0SORM44+stUGmw@mail.gmail.com
<sys/select.h> is required by POSIX.1-2001 to get the prototype of
select(2), but nearly no systems enforce that because older standards
let you get away with including some other headers. Recent OpenBSD
hacking has removed that frail touch of friendliness, however, which
broke some compiles; fix all the way back to 9.1 by adding the required
standard. Only vacuumdb.c was reported to fail, but it seems easier to
fix the whole lot in a fell swoop.
Per bug #14334 by Sean Farrell.
Faulty AND/OR nesting in the WHERE clause of getFuncs' SQL query led to
dumping range constructor functions if they are part of an extension
and we're in binary-upgrade mode. Actually, we don't want to dump them
separately even then, since CREATE TYPE AS RANGE will create the range's
constructor functions regardless. Per report from Andrew Dunstan.
It looks like this mistake was introduced by me, in commit b985d4877, in
perhaps-overzealous refactoring to reduce code duplication. I'm suitably
embarrassed.
Report: <34854939-02d7-f591-5677-ce2994104599@dunslane.net>
This adds a couple of new timezones that are present in the newer
versions of Windows. It also updates comments to reference UTC rather
than GMT, as this change has been made in Windows.
Michael Paquier
Due to simplistic quoting and confusion of database names with conninfo
strings, roles with the CREATEDB or CREATEROLE option could escalate to
superuser privileges when a superuser next ran certain maintenance
commands. The new coding rule for PQconnectdbParams() calls, documented
at conninfo_array_parse(), is to pass expand_dbname=true and wrap
literal database names in a trivial connection string. Escape
zero-length values in appendConnStrVal(). Back-patch to 9.1 (all
supported versions).
Nathan Bossart, Michael Paquier, and Noah Misch. Reviewed by Peter
Eisentraut. Reported by Nathan Bossart.
Security: CVE-2016-5424
Rename these newly-extern functions with terms more typical of their new
neighbors. No functional changes; a subsequent commit will use them in
more places. Back-patch to 9.1 (all supported versions). Back branches
lack src/fe_utils, so instead rename the functions in place; the
subsequent commit will copy them into the other programs using them.
Security: CVE-2016-5424
Back-patch commit 2953cd6d17 and certain
runPgDump() bits of 3dee636e04 to 9.2 and
9.1. This synchronizes their doConnStrQuoting() implementations with
later releases. Subsequent security patches will modify that function.
Security: CVE-2016-5424
The incorrect quoting may have permitted arbitrary command execution.
At a minimum, it gave broader control over the command line to actors
supposed to have control over a single argument. Back-patch to 9.1 (all
supported versions).
Security: CVE-2016-5424
These characters prematurely terminate Windows shell command processing,
causing the shell to execute a prefix of the intended command. The
chief alternative to rejecting these characters was to bypass the
Windows shell with CreateProcess(), but the ability to use such names
has little value. Back-patch to 9.1 (all supported versions).
This change formally revokes support for these characters in database
names and roles names. Don't document this; the error message is
self-explanatory, and too few users would benefit. A future major
release may forbid creation of databases and roles so named. For now,
check only at known weak points in pg_dumpall. Future commits will,
without notice, reject affected names from other frontend programs.
Also extend the restriction to pg_dumpall --dbname=CONNSTR arguments and
--file arguments. Unlike the effects on role name arguments and
database names, this does not reflect a broad policy change. A
migration to CreateProcess() could lift these two restrictions.
Reviewed by Peter Eisentraut.
Security: CVE-2016-5424
These programs nominally accepted conninfo strings, but they would
proceed to use the original dbname parameter as though it were an
unadorned database name. This caused "reindexdb dbname=foo" to issue an
SQL command that always failed, and other programs printed a conninfo
string in error messages that purported to print a database name. Fix
both problems by using PQdb() to retrieve actual database names.
Continue to print the full conninfo string when reporting a connection
failure. It is informative there, and if the database name is the sole
problem, the server-side error message will include the name. Beyond
those user-visible fixes, this allows a subsequent commit to synthesize
and use conninfo strings without that implementation detail leaking into
messages. As a side effect, the "vacuuming database" message now
appears after, not before, the connection attempt. Back-patch to 9.1
(all supported versions).
Reviewed by Michael Paquier and Peter Eisentraut.
Security: CVE-2016-5424
The decision to reuse values of parameters from a previous connection
has been based on whether the new target is a conninfo string. Add this
means of overriding that default. This feature arose as one component
of a fix for security vulnerabilities in pg_dump, pg_dumpall, and
pg_upgrade, so back-patch to 9.1 (all supported versions). In 9.3 and
later, comment paragraphs that required update had already-incorrect
claims about behavior when no connection is open; fix those problems.
Security: CVE-2016-5424
In arguments, these meta-commands wrongly treated each pair as closing
the double quoted string. Make the behavior match the documentation.
This is a compatibility break, but I more expect to find software with
untested reliance on the documented behavior than software reliant on
today's behavior. Back-patch to 9.1 (all supported versions).
Reviewed by Tom Lane and Peter Eisentraut.
Security: CVE-2016-5424
Since -c plus -C requests dropping and recreating the target database
as a whole, not dropping individual objects in it, we should assume that
the public schema already exists and need not be created. The previous
coding considered only the state of the -c option, so it would emit
"CREATE SCHEMA public" anyway, leading to an unexpected error in restore.
Back-patch to 9.2. Older versions did not accept -c with -C so the
issue doesn't arise there. (The logic being patched here dates to 8.0,
cf commit 2193121fa, so it's not really wrong that it didn't consider
the case at the time.)
Note that versions before 9.6 will still attempt to emit REVOKE/GRANT
on the public schema; but that happens without -c/-C too, and doesn't
seem to be the focus of this complaint. I considered extending this
stanza to also skip the public schema's ACL, but that would be a
misfeature, as it'd break cases where users intentionally changed that
ACL. The real fix for this aspect is Stephen Frost's work to not dump
built-in ACLs, and that's not going to get back-ported.
Per bugs #13804 and #14271. Solution found by David Johnston and later
rediscovered by me.
Report: <20151207163520.2628.95990@wrigleys.postgresql.org>
Report: <20160801021955.1430.47434@wrigleys.postgresql.org>
The help message for pg_basebackup specifies that the numbers 0 through 9
are accepted as valid values of -Z option. But, previously -Z 0 was rejected
as an invalid compression level.
Per discussion, it's better to make pg_basebackup treat 0 as valid
compression level meaning no compression, like pg_dump.
Back-patch to all supported versions.
Reported-By: Jeff Janes
Reviewed-By: Amit Kapila
Discussion: CAMkU=1x+GwjSayc57v6w87ij6iRGFWt=hVfM0B64b1_bPVKRqg@mail.gmail.com
Per the fgets() specification, it cannot return without reading some data
unless it reports EOF or error. So the code here assumed that the data
buffer would necessarily be nonempty when we go to check for a newline
having been read. However, Agostino Sarubbo noticed that this could fail
to be true if the first byte of the data is a NUL (\0). The fgets() API
doesn't really work for embedded NULs, which is something I don't feel
any great need for us to worry about since we generally don't allow NULs
in SQL strings anyway. But we should not access off the end of our own
buffer if the case occurs. Normally this would just be a harmless read,
but if you were unlucky the byte before the buffer would contain '\n'
and we'd overwrite it with '\0', and if you were really unlucky that
might be valuable data and psql would crash.
Agostino reported this to pgsql-security, but after discussion we concluded
that it isn't worth treating as a security bug; if you can control the
input to psql you can do far more interesting things than just maybe-crash
it. Nonetheless, it is a bug, so back-patch to all supported versions.
Back-patch commit 1c1a7cbd6a, along with subsequent portability
fixes, into all active branches. Also, back-patch commits 696027727 and
596857043 (addition of zic -P option) into 9.1 and 9.2, just to reduce
differences between the branches. src/timezone/ is now largely identical
in all active branches, except that in 9.1, pgtz.c retains the
initial-timezone-selection code that was moved over to initdb in 9.2.
Ordinarily we wouldn't risk this much code churn in back branches, but it
seems necessary in this case, because among the changes are two feature
additions in the "zic" zone data file compiler (a larger limit on the
number of allowed DST transitions, and addition of a "%z" escape in zone
abbreviations). IANA have not yet started to use those features in their
tzdata files, but presumably they will before too long. If we don't update
then we'll be unable to adopt new timezone data. Also, installations built
with --with-system-tzdata (which includes most distro-supplied builds, I
believe) might fail even if we don't update our copies of the data files.
There are assorted bug fixes too, mostly affecting obscure timezones or
post-2037 dates.
Discussion: <13601.1468868947@sss.pgh.pa.us>
As reported by Michael Feld, pg_upgrade'ing an installation having
extensions with operator families that contain just a single operator class
failed to reproduce the extension membership of those operator families.
This caused no immediate ill effects, but would create problems when later
trying to do a plain dump and restore, because the seemingly-not-part-of-
the-extension operator families would appear separately in the pg_dump
output, and then would conflict with the families created by loading the
extension. This has been broken ever since extensions were introduced,
and many of the standard contrib extensions are affected, so it's a bit
astonishing nobody complained before.
The cause of the problem is a perhaps-ill-considered decision to omit
such operator families from pg_dump's output on the grounds that the
CREATE OPERATOR CLASS commands could recreate them, and having explicit
CREATE OPERATOR FAMILY commands would impede loading the dump script into
pre-8.3 servers. Whatever the merits of that decision when 8.3 was being
written, it looks like a poor tradeoff now. We can fix the pg_upgrade
problem simply by removing that code, so that the operator families are
dumped explicitly (and then will be properly made to be part of their
extensions).
Although this fixes the behavior of future pg_upgrade runs, it does nothing
to clean up existing installations that may have improperly-linked operator
families. Given the small number of complaints to date, maybe we don't
need to worry about providing an automated solution for that; anyone who
needs to clean it up can do so with manual "ALTER EXTENSION ADD OPERATOR
FAMILY" commands, or even just ignore the duplicate-opfamily errors they
get during a pg_restore. In any case we need this fix.
Back-patch to all supported branches.
Discussion: <20228.1460575691@sss.pgh.pa.us>
On the machines I tried this on, pressing TAB after SECURITY LABEL led to
being offered ON and FOR as intended, plus random other keywords (varying
across machines). But if you were a bit more unlucky you'd get a crash,
as reported by nummervet@mail.ru in bug #14019.
Seems to have been an aboriginal error in the SECURITY LABEL patch,
commit 4d355a8336. Hence, back-patch to all supported versions.
There's no bug in HEAD, though, thanks to our recent tab-completion
rewrite.
A thinko in a96761391 caused pg_ctl to get it exactly backwards when
deciding whether to report problems to the Windows eventlog or to stderr.
Per bug #14001 from Manuel Mathar, who also identified the fix.
Like the previous patch, back-patch to all supported branches.
