ALTER SUBSCRIPTION ... REFRESH PUBLICATION interpolates schema and
relation names into SQL without quoting them. A crafted subscriber
relation name can inject arbitrary SQL on the publisher. Test such a
name. Back-patch to v16, where commit
8756930190 first appeared.
Reported-by: Pavel Kohout <pavel.kohout@aisle.com>
Author: Pavel Kohout <pavel.kohout@aisle.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Backpatch-through: 16
Security: CVE-2026-6638
This commit applies timingsafe_bcmp() to authentication paths that
handle attributes or data previously compared with memcpy() or strcmp(),
which are sensitive to timing attacks.
The following data is concerned by this change, some being in the
backend and some in the frontend:
- For a SCRAM or MD5 password, the computed key or the MD5 hash compared
with a password during a plain authentication.
- For a SCRAM exchange, the stored key, the client's final nonce and the
server nonce.
- RADIUS (up to v18), the encrypted password.
- For MD5 authentication, the MD5(MD5()) hash.
Reported-by: Joe Conway <mail@joeconway.com>
Security: CVE-2026-6478
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: John Naylor <johncnaylorls@gmail.com>
Backpatch-through: 14
The handling of SSL and GSS negotiation messages in
ProcessStartupPacket() could cause a recursion of the backend,
ultimately crashing the server as the negotiation attempts were not
tracked across multiple calls processing startup packets.
A malicious client could therefore alternate rejected SSL and GSS
requests indefinitely, each adding a stack frame, until the backend
crashed with a stack overflow, taking down a server.
This commit addresses this issue by modifying ProcessStartupPacket() so
as processed negotiation attempts are tracked, preventing infinite
recursive attempts. A TAP test is added to check this problem, where
multiple SSL and GSS negotiated attempts are stacked.
Reported-by: Calif.io in collaboration with Claude and Anthropic
Research
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Security: CVE-2026-6479
Backpatch-through: 14
multirange_recv and BlockRefTableReaderNextRelation were incautious
about multiplying a possibly-large integer by a factor more than 1
and then using it as an allocation size. This is harmless on 64-bit
systems where we'd compute a size exceeding MaxAllocSize and then
fail, but on 32-bit systems we could overflow size_t leading to an
undersized allocation and buffer overrun.
Fix these places by using palloc_array() instead of a handwritten
multiplication. (In HEAD, some of them were fixed already, but
none of that work got back-patched at the time.)
In addition, BlockRefTableReaderNextRelation passes the same value
to BlockRefTableRead's "int length" parameter. If built for
64-bit frontend code, palloc_array() allows a larger array size
than it otherwise would, potentially allowing that parameter to
overflow. Add an explicit check to forestall that and keep the
behavior the same cross-platform.
Reported-by: Xint Code
Author: Tom Lane <tgl@sss.pgh.pa.us>
Backpatch-through: 14
Security: CVE-2026-6473
Some UTF8 characters decompose to more than a dozen codepoints.
It is possible for an input string that fits into well under
1GB to produce more than 4G decomposed codepoints, causing
unicode_normalize()'s decomp_size variable to wrap around to a
small positive value. This results in a small output buffer
allocation and subsequent buffer overrun.
To fix, test after each addition to see if we've overrun MaxAllocSize,
and break out of the loop early if so. In frontend code we want to
just return NULL for this failure (treating it like OOM). In the
backend, we can rely on the following palloc() call to throw error.
I also tightened things up in the calling functions in varlena.c,
using size_t rather than int and allocating the input workspace
with palloc_array(). These changes are probably unnecessary
given the knowledge that the original input and the normalized
output_chars array must fit into 1GB, but it's a lot easier to
believe the code is safe with these changes.
Reported-by: Xint Code
Reported-by: Bruce Dang <bruce@calif.io>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Co-authored-by: Heikki Linnakangas <hlinnaka@iki.fi>
Backpatch-through: 14
Security: CVE-2026-6473
The number of NFA states, number of NFA arcs, and number of colors
are all bounded to reasonably small values. However, there are
places where we try to allocate arrays sized by products of those
quantities, and those calculations could overflow, enabling
buffer-overrun attacks. In practice there's no problem on 64-bit
machines, but there are some live scenarios on 32-bit machines.
A related problem is that citerdissect() and creviterdissect()
allocate arrays based on the length of the input string, which
potentially could overflow.
To fix, invent MALLOC_ARRAY and REALLOC_ARRAY macros that rely on
palloc_array_extended and repalloc_array_extended with the NO_OOM
option, similarly to the existing MALLOC and REALLOC macros.
(Like those, they'll throw an error not return a NULL result for
oversize requests. This doesn't really fit into the regex code's
view of error handling, but it'll do for now. We can consider
whether to change that behavior in a non-security follow-up patch.)
I installed similar defenses in the colormap construction code.
It's not entirely clear whether integer overflow is possible
there, but analyzing the behavior in detail seems not worth
the trouble, as the risky spots are not in hot code paths.
I left a bunch of calls as-is after verifying that they can't
overflow given reasonable limits on nstates and narcs. Those
limits were enforced already via REG_MAX_COMPILE_SPACE, but
add commentary to document the interactions.
In passing, also fix a related edge case, which is that the
special color numbers used in LACON carcs could overflow the
"color" data type, if ncolors is close to MAX_COLOR.
In v14 and v15, the regex engine calls malloc() directly instead
of using palloc(), so MALLOC_ARRAY and REALLOC_ARRAY do likewise.
Reported-by: Xint Code
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Backpatch-through: 14
Security: CVE-2026-6473
Sufficiently large "count" arguments could result in undetected
overflow, causing the allocated memory chunk to be much smaller
than what the caller will subsequently write into it. This is
unlikely to be a hazard with 64-bit size_t but can sometimes
happen on 32-bit builds, primarily where a function allocates
workspace that's significantly larger than its input data.
Rather than trying to patch the at-risk callers piecemeal,
let's just redefine these macros so that they always check.
To do that, move the longstanding add_size() and mul_size() functions
into palloc.h and mcxt.c, and adjust them to not be specific to
shared-memory allocation. Then invent palloc_mul(), palloc0_mul(),
palloc_mul_extended() to use these functions. Actually, the latter
use inlined copies to save one function call. repalloc_array() gets
similar treatment. I didn't bother trying to inline the calls for
repalloc0_array() though.
In v14 and v15, this also adds repalloc_extended(), which previously
was only available in v16 and up.
We need copies of all this in fe_memutils.[hc] as well, since that
module also provides palloc_array() etc.
Reported-by: Xint Code
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Backpatch-through: 14
Security: CVE-2026-6473
The options "StartSel", "StopSel" and "FragmentDelimiter" given by a
caller of the SQL function ts_headline() have their lengths stored as
int16. When providing values larger than PG_INT16_MAX, it was possible
to overflow the length values stored, leading to incorrect behaviors in
generateHeadline(), in most cases translating to a crash.
Attempting to use values for these options larger than PG_INT16_MAX is
now blocked. Some test cases are added to cover our tracks.
Reported-by: Xint Code
Author: Michael Paquier <michael@paquier.xyz>
Backpatch-through: 14
Security: CVE-2026-6473
rel_is_distinct_for()'s RTE_SUBQUERY branch passed only the equality
operator from each join clause to query_is_distinct_for(), discarding
the operator's input collation. query_is_distinct_for() then verified
opfamily compatibility but never checked collations, so a DISTINCT /
GROUP BY / set-op operating under one collation was trusted to prove
uniqueness for a comparison performed under an unrelated collation.
As with the recent fix in relation_has_unique_index_for(), this is
unsound for nondeterministic collations and yields wrong query results
in any optimization that consumes the proof.
Fix by carrying each clause's operator input collation into
query_is_distinct_for() and validating it at every check-site against
the subquery target expression's collation.
Back-patch to all supported branches. query_is_distinct_for() is
declared in an installed header, so on stable branches the existing
two-list signature is retained as a thin wrapper that forwards to a
new collation-aware entry point; external callers continue to receive
the historical collation-blind answer.
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAMbWs4_XUUSTyzCaRjUeeahWNqi=8ZOA5Q4coi8zUVEDSBkM6A@mail.gmail.com
Backpatch-through: 14
relation_has_unique_index_for() has long had an XXX noting that it
doesn't check collations when matching a unique index's columns
against equality clauses. This was benign as long as all collations
in play reduced to the same notion of equality, but has been incorrect
since nondeterministic collations were introduced in PG 12: a unique
index under a deterministic collation does not prove uniqueness under
a nondeterministic collation, nor vice versa.
The consequence is wrong query results for any planner optimization
that consumes the faulty proof, including inner-unique join execution
(which stops the inner search after the first match per outer row),
useless-left-join removal, semijoin-to-innerjoin reduction, and
self-join elimination.
Fix by requiring the index's collation to agree on equality with the
clause's input collation. Two collations agree on equality if either
is InvalidOid (denoting a non-collation-sensitive operation, which
cannot conflict with the other side), if they have the same OID, or if
both are deterministic: by definition a deterministic collation treats
two strings as equal iff they are byte-wise equal (see CREATE
COLLATION), so any two deterministic collations share the same
equality relation and the uniqueness proof carries over. Any mismatch
involving a nondeterministic collation is rejected.
Back-patch to all supported branches; the bug has existed since
nondeterministic collations were introduced in PG 12.
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAMbWs4_XUUSTyzCaRjUeeahWNqi=8ZOA5Q4coi8zUVEDSBkM6A@mail.gmail.com
Backpatch-through: 14
The XLogRecordPageWithFreeSpace function updates the freespace map (FSM) data
while replaying data-level WAL records during the recovery. If the FSM block
is updated, it needs to be marked as modified. Currently, this is done with
the MarkBufferDirtyHint call (as in all other cases for modifying FSM data).
However, in the recovery context, this function will actually do nothing if
checksums are enabled. It's assumed that the page should not be dirtied
during recovery while modifying hints to protect against torn pages, since no
new WAL data can be generated at this point to store FPI.
Such logic does not seem fully aligned with the FSM case, as its blocks could
be simply zeroed if a checksum mismatch is detected. Currently, changes to an
FSM block could be lost if each change to that block occurs infrequently
enough to allow it to be evicted from the cache. To persist the change, the
modification needs to be performed while the FSM block is still kept in
buffers and marked as dirty after receiving its FPI. If the block has already
been cleaned, the change won't be persisted, so stored FSM blocks may remain
in an obsolete state.
If a large number of discrepancies between the data in leaf FSM blocks and the
actual data blocks accumulate on the replica server, this could cause
significant delays in insert operations after switchover. Such an insert
operation may need to visit many data blocks marked as having sufficient
space in the FSM, only to discover that the information is incorrect and the
FSM records need to be corrected. In a heavily trafficked insert-only table
with many concurrent clients performing inserts, this has been observed to
cause several-second stalls, causing visible application malfunction. The
desire to avoid such cases was the reason behind the commit ab7dbd681, which
introduced an update of FSM data during the heap_xlog_visible invocation.
However, an update to the FSM data on the standby side could be lost due to a
missing 'dirty' flag, so there is still a possibility that a large number of
FSM records will contain incorrect data. Note that having a zeroed FSM page
in such a case (due to a checksum mismatch) is preferable, as a zero value
will be interpreted as an indication of full data blocks, and the inserter
will be routed to the next FSM block or to the end of the table.
Given that FSM is ready to handle torn page writes and
XLogRecordPageWithFreeSpace is called only during the recovery, there seems
to be no reason to use MarkBufferDirtyHint here instead of a regular
MarkBufferDirty call.
Discussion: https://postgr.es/m/596c4f1c-f966-4512-b9c9-dd8fbcaf0928%40postgrespro.ru
Author: Alexey Makhmutov <a.makhmutov@postgrespro.ru>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
When cloning extended statistics via CREATE TABLE ... LIKE ... INCLUDING
STATISTICS, stxkeys holds attribute numbers from the source (parent)
table, but get_attname() was being called with the child relation's
OID. If the parent has dropped columns, the child's attribute numbers
are renumbered sequentially and no longer match, so the lookup either
returns the wrong column name (silent corruption) or errors out when
the attnum does not exist in the child.
Fix it by remapping the parent attnum through attmap before the lookup,
consistent with how expression statistics are already handled a few
lines below.
Add a regression test covering both manifestations: a 3-column parent
where the stale attnum refers to no child column (cache-lookup error),
and a 4-column parent where the stale attnum silently refers to the
wrong child column.
Author: Julien Tachoires <julmon@gmail.com>
Reviewed-by: Srinath Reddy Sadipiralla <srinath2133@gmail.com>
Discussion: https://postgr.es/m/20260415105718.tomuncfbmlt67oel@poseidon.home.virt
Backpatch-through: 14
Upon a failure of sync_file_range(), EINTR was checked based on the
returned result of the routine rather than its errno. sync_file_range()
returns -1 on failure, making the check a no-op, invalidating the retry
attempt in this case.
Oversight in 0d369ac650.
Author: DaeMyung Kang <charsyam@gmail.com>
Discussion: https://postgr.es/m/20260429151811.1810874-1-charsyam@gmail.com
Backpatch-through: 16
ExecEvalHashedScalarArrayOp(), when using a strict equality function,
performs a short-circuit when looking up NULL values. When the function
is non-strict, the code incorrectly looked up the hash table for a
zero-valued Datum, which could have resulted in an accidental true
return if the hash table contained zero valued Datum, or could result
in a crash for non-byval types.
Here we fix this by adding an extra step when we build the hash table to
check what the result of a NULL lookup would be. This requires looping
over the array and checking what the non-hashed version of the code
would do. We cache the results of that in the expression so that we can
reuse the result any time we're asked to search for a NULL value.
It's important to note that non-strict equality functions are free to
treat any NULL value as equal to any non-NULL value. For example,
someone may wish to design a type that treats an empty string and NULL
as equal.
All built-in types have strict equality functions, so this could affect
custom / user-defined types.
Author: Chengpeng Yan <chengpeng_yan@outlook.com>
Author: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: ChangAo Chen <cca5507@qq.com>
Discussion: https://postgr.es/m/A16187AE-2359-4265-9F5E-71D015EC2B2D@outlook.com
Backpatch-through: 14
If CheckAttributeType() is called with InvalidOid, it performs a bunch
of pointless, futile syscache lookups with InvalidOid, but ultimately
tolerates it and has no effect. We were calling it with InvalidOid on
dropped columns, but it seems accidental that it works, so let's stop
doing it.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/93ce56cd-02a6-4db1-8224-c8999372facc@iki.fi
Backpatch-through: 14
CheckAttributeType() checks that a composite type is not made a member
of itself with ALTER TABLE ADD COLUMN or ALTER TYPE ADD ATTRIBUTE,
even indirectly via a domain, array, another composite type or a range
type. But it missed checking for multiranges. That was a simple
oversight when multiranges were added.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/93ce56cd-02a6-4db1-8224-c8999372facc@iki.fi
Backpatch-through: 14
to_char() allocates its output buffer with 8 bytes per formatting
code in the pattern. If the locale's currency symbol, thousands
separator, or decimal or sign symbol is more than 8 bytes long,
in principle we could overrun the output buffer. No such locales
exist in the real world, so it seems sufficient to truncate the
symbol if we do see it's too long.
Reported-by: Xint Code
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/638232.1776790821@sss.pgh.pa.us
Backpatch-through: 14
parse_affentry() and addCompoundAffixFlagValue() each collect fields
from an affix file into working buffers of size BUFSIZ. They failed
to defend against overlength fields, so that a malicious affix file
could cause a stack smash. BUFSIZ (typically 8K) is certainly way
longer than any reasonable affix field, but let's fix this while
we're closing holes in this area.
I chose to do this by silently truncating the input before it can
overrun the buffer, using logic comparable to the existing logic in
get_nextfield(). Certainly there's at least as good an argument for
raising an error, but for now let's follow the existing precedent.
Reported-by: Igor Stepansky <igor.stepansky@orca.security>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/864123.1776810909@sss.pgh.pa.us
Backpatch-through: 14
This function writes into a caller-supplied buffer of length
2 * MAXNORMLEN, which should be plenty in real-world cases.
However a malicious affix file could supply an affix long
enough to overrun that. Defend by just rejecting the match
if it would overrun the buffer. I also inserted a check of
the input word length against Affix->replen, just to be sure
we won't index off the buffer, though it would be caller error
for that not to be true.
Also make the actual copying steps a bit more readable, and remove
an unnecessary requirement for the whole input word to fit into the
output buffer (even though it always will with the current caller).
The lack of documentation in this code makes my head hurt, so
I also reverse-engineered a basic header comment for CheckAffix.
Reported-by: Xint Code
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/641711.1776792744@sss.pgh.pa.us
Backpatch-through: 14
This commit tweaks ALTER INDEX .. ATTACH PARTITION to attempt a
validation of a parent index in the case where an index is already
attached but the parent is not yet valid. This occurs in cases where a
parent index was created invalid such as with CREATE INDEX ONLY, but was
left invalid after an invalid child index was attached (partitioned
indexes set indisvalid to false if at least one partition is
!indisvalid, indisvalid is true in a partitioned table iff all
partitions are indisvalid). This could leave a partition tree in a
situation where a user could not bring the parent index back to valid
after fixing the child index, as there is no built-in mechanism to do
so. This commit relies on the fact that repeated ATTACH PARTITION
commands on the same index silently succeed.
An invalid parent index is more than just a passive issue. It causes
for example ON CONFLICT on a partitioned table if the invalid parent
index is used to enforce a unique constraint.
Some test cases are added to track some of problematic patterns, using a
set of partition trees with combinations of invalid indexes and ATTACH
PARTITION.
Reported-by: Mohamed Ali <moali.pg@gmail.com>
Author: Sami Imseih <sanmimseih@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Haibo Yan <tristan.yim@gmail.com>
Discussion: http://postgr.es/m/CAGnOmWqi1D9ycBgUeOGf6mOCd2Dcf=6sKhbf4sHLs5xAcKVCMQ@mail.gmail.com
Backpatch-through: 14
When a rule action or rule qualification references NEW.col where col
is a generated column (stored or virtual), the rewriter produces
incorrect results.
rewriteTargetListIU removes generated columns from the query's target
list, since stored generated columns are recomputed by the executor
and virtual ones store nothing. However, ReplaceVarsFromTargetList
then cannot find these columns when resolving NEW references during
rule rewriting. For UPDATE, the REPLACEVARS_CHANGE_VARNO fallback
redirects NEW.col to the original target relation, making it read the
pre-update value (same as OLD.col). For INSERT,
REPLACEVARS_SUBSTITUTE_NULL replaces it with NULL. Both are wrong
when the generated column depends on columns being modified.
Fix by building target list entries for generated columns from their
generation expressions, pre-resolving the NEW.attribute references
within those expressions against the query's targetlist, and passing
them together with the query's targetlist to ReplaceVarsFromTargetList.
Back-patch to all supported branches. Virtual generated columns were
added in v18, so the back-patches in pre-v18 branches only handle
stored generated columns.
Reported-by: SATYANARAYANA NARLAPURAM <satyanarlapuram@gmail.com>
Author: Richard Guo <guofenglinux@gmail.com>
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/CAHg+QDexGTmCZzx=73gXkY2ZADS6LRhpnU+-8Y_QmrdTS6yUhA@mail.gmail.com
Backpatch-through: 14
When the startup process exists with a FATAL error during PM_STARTUP,
the postmaster called ExitPostmaster() directly, assuming that no other
processes are running at this stage. Since 7ff23c6d27, this
assumption is not true, as the checkpointer, the background writer, the
IO workers and bgworkers kicking in early would be around.
This commit removes the startup-specific shortcut happening in
process_pm_child_exit() for a failing startup process during PM_STARTUP,
falling down to the existing exit() flow to signal all the started
children with SIGQUIT, so as we have no risk of creating orphaned
processes.
This required an extra change in HandleFatalError() for v18 and newer
versions, as an assertion could be triggered for PM_STARTUP. It is now
incorrect. In v17 and older versions, HandleChildCrash() needs to be
changed to handle PM_STARTUP so as children can be waited on.
While on it, fix a comment at the top of postmaster.c. It was claiming
that the checkpointer and the background writer were started after
PM_RECOVERY. That is not the case.
Author: Ayush Tiwari <ayushtiwari.slg01@gmail.com>
Discussion: https://postgr.es/m/CAJTYsWVoD3V9yhhqSae1_wqcnTdpFY-hDT7dPm5005ZFsL_bpA@mail.gmail.com
Backpatch-through: 15
Commit cfcd57111 et al fell over under Valgrind testing.
(It seems to be enough to #define USE_VALGRIND, you don't actually
need to run it under Valgrind to see failures.) The cause is that
remove_rel_from_eclass updates each EquivalenceMember's em_relids,
and those can be aliases of the left_relids or right_relids of some
RestrictInfo in ec_sources. If the update made em_relids empty then
bms_del_member will have pfree'd the relid set, so that the subsequent
attempt to clean up ec_sources accesses already-freed memory.
We missed seeing ill effects before cfcd57111 because (a) if the
pfree happens then we will remove the EquivalenceMember altogether,
making the source RestrictInfo no longer of use, and (b) the
cleanup of ec_sources didn't touch left/right_relids before that.
I'm unclear though on how cfcd57111 managed to pass non-USE_VALGRIND
testing. Apparently we managed to store another Bitmapset into the
freed space before trying to access it, but you'd not think that would
happen 100% of the time. I think what USE_VALGRIND changes is that it
makes list.c much more memory-hungry, so that the freed space gets
claimed by some List node before a Bitmapset can be put there.
This failure can be seen in v16, v17, and master, but oddly enough not
v18. That's because the SJE patch replaced the simple bms_del_members
calls used here with adjust_relid_set, which is careful not to
scribble on its input. But commit 20efbdffe just recently put back
the old coding and thus resurrected the problem.
Discussion: https://postgr.es/m/458729.1776724816@sss.pgh.pa.us
Backpatch-through: 16, 17, master
The original implementation of remove_rel_from_restrictinfo()
thought it could skate by with removing no-longer-valid relid
bits from only the clause_relids and required_relids fields.
This is quite bogus, although somehow we had not run across a
counterexample before now. At minimum, the left_relids and
right_relids fields need to be fixed because they will be
examined later by clause_sides_match_join(). But it seems
pretty foolish not to fix all the relid fields, so do that.
This needs to be back-patched as far as v16, because the
bug report shows a planner failure that does not occur
before v16. I'm a little nervous about back-patching,
because this could cause unexpected plan changes due to
opening up join possibilities that were rejected before.
But it's hard to argue that this isn't a regression. Also,
the fact that this changes no existing regression test results
suggests that the scope of changes may be fairly narrow.
I'll refrain from back-patching further though, since no
adverse effects have been demonstrated in older branches.
Bug: #19460
Reported-by: François Jehl <francois.jehl@pigment.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/19460-5625143cef66012f@postgresql.org
Backpatch-through: 16
Parallel apply workers previously failed to report statistics while
waiting for new work in the main loop. This resulted in the stats from the
most recent transaction remaining unbuffered, leading to arbitrary
reporting delays—particularly when streamed transactions were infrequent.
This commit ensures that statistics are explicitly flushed when the worker
is idle, providing timely visibility into accumulated worker activity.
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 16, where it was introduced
Discussion: https://postgr.es/m/TYRPR01MB1419579F217CC4332B615589594202@TYRPR01MB14195.jpnprd01.prod.outlook.com
Three routines in pgstat_database.c incorrectly ignore the database OID
provided by their caller, using MyDatabaseId instead:
- pgstat_report_connect()
- pgstat_report_disconnect()
- pgstat_reset_database_timestamp()
The first two functions, for connection and disconnection, each have a
single caller that already passes MyDatabaseId. This was harmless,
still incorrect.
The timestamp reset function also has a single caller, but in this case
the issue has a real impact: it fails to reset the timestamp for the
shared-database entry (datid=0) when operating on shared objects. This
situation can occur, for example, when resetting counters for shared
relations via pg_stat_reset_single_table_counters().
There is currently one test in the tree that checks the reset of a
shared relation, for pg_shdescription, we rely on it to check what is
stored in pg_stat_database. As stats_reset may be NULL, two resets are
done to provide a baseline for comparison.
Author: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Dapeng Wang <wangdp20191008@gmail.com>
Discussion: https://postgr.es/m/ABBD5026-506F-4006-A569-28F72C188693@gmail.com
Backpatch-through: 15
In nodeWindowAgg.c, the calculations for frame start and end positions
in ROWS and GROUPS modes were performed using simple integer addition.
If a user-supplied offset was sufficiently large (close to INT64_MAX),
adding it to the current row or group index could cause a signed
integer overflow, wrapping the result to a negative number.
This led to incorrect behavior where frame boundaries that should have
extended indefinitely (or beyond the partition end) were treated as
falling at the first row, or where valid rows were incorrectly marked
as out-of-frame. Depending on the specific query and data, these
overflows can result in incorrect query results, execution errors, or
assertion failures.
To fix, use overflow-aware integer addition (ie, pg_add_s64_overflow)
to check for overflows during these additions. If an overflow is
detected, the boundary is now clamped to INT64_MAX. This ensures the
logic correctly treats the boundary as extending to the end of the
partition.
Bug: #19405
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Discussion: https://postgr.es/m/19405-1ecf025dda171555@postgresql.org
Backpatch-through: 14
Commit aa606b931 installed a test that would reference a nonexistent
TupleDesc array entry if a system column is used in COPY FROM WHERE.
Typically this would be harmless, but with bad luck it could result
in a phony "generated columns are not supported in COPY FROM WHERE
conditions" error, and at least in principle it could cause SIGSEGV.
(Compare 570e2fcc0 which fixed the identical problem in another
place.) Also, since c98ad086a it throws an Assert instead.
In the back branches, just guard the test to make it a safe no-op for
system columns. Commit 21c69dc73 installed a more aggressive answer
in master.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/6f435023-8ab6-47c2-ba07-035d0c4212f9@gmail.com
Backpatch-through: 14-18
This code missed the need to update the combined state's
nullbitmap if state1 already had a bitmap but state2 didn't.
We need to extend the existing bitmap with 1's but didn't.
This could result in wrong output from a parallelized
array_agg(anyarray) calculation, if the input has a mix of
null and non-null elements. The errors depended on timing
of the parallel workers, and therefore would vary from one
run to another.
Also install guards against integer overflow when calculating
the combined object's sizes, and make some trivial cosmetic
improvements.
Author: Dmytro Astapov <dastapov@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAFQUnFj2pQ1HbGp69+w2fKqARSfGhAi9UOb+JjyExp7kx3gsqA@mail.gmail.com
Backpatch-through: 16
LLVM 22 has the fix that we copied into our tree in commit 9044fc1d and
a new function to reach it[1][2], so we only need to use our copy for
Aarch64 + LLVM < 22. The only change to the final version that our copy
didn't get is a new LLVM_ABI macro, but that isn't appropriate for us.
Our copy is hopefully now frozen and would only need maintenance if bugs
are found in the upstream code.
Non-Aarch64 systems now also use the new API with LLVM 22. It allocates
all sections with one contiguous mmap() instead of one per
section. We could have done that earlier, but commit 9044fc1d wanted to
limit the blast radius to the affected systems. We might as well
benefit from that small improvement everywhere now that it is available
out of the box.
We can't delete our copy until LLVM 22 is our minimum supported version,
or we switch to the newer JITLink API for at least Aarch64.
[1] https://github.com/llvm/llvm-project/pull/71968
[2] https://github.com/llvm/llvm-project/pull/174307
Backpatch-through: 14
Discussion: https://postgr.es/m/CA%2BhUKGJTumad75o8Zao-LFseEbt%3DenbUFCM7LZVV%3Dc8yg2i7dg%40mail.gmail.com
Several places in tuplestore.c would leave the tuplestore data
structure effectively corrupt if some subroutine were to throw
an error. Notably, if WRITETUP() failed after some number of
successful calls within dumptuples(), the tuplestore would
contain some memtuples pointers that were apparently live
entries but in fact pointed to pfree'd chunks.
In most cases this sort of thing is fine because transaction
abort cleanup is not too picky about the contents of memory that
it's going to throw away anyway. There's at least one exception
though: if a Portal has a holdStore, we're going to call
tuplestore_end() on that, even during transaction abort.
So it's not cool if that tuplestore is corrupt, and that means
tuplestore.c has to be more careful.
This oversight demonstrably leads to crashes in v15 and before,
if a holdable cursor fails to persist its data due to an undersized
temp_file_limit setting. Very possibly the same thing can happen in
v16 and v17 as well, though the specific test case submitted failed
to fail there (cf. 095555daf). The failure is accidentally dodged
as of v18 because 590b045c3 got rid of tuplestore_end's retail tuple
deletion loop. Still, it seems unwise to permit tuplestores to become
internally inconsistent in any branch, so I've applied the same fix
across the board.
Since the known test case for this is rather expensive and doesn't
fail in recent branches, I've omitted it.
Bug: #19438
Reported-by: Dmitriy Kuzmin <kuzmin.db4@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/19438-9d37b179c56d43aa@postgresql.org
Backpatch-through: 14
Before the major rewrite in commit c6e0fe1f2, AllocSetFree() would
typically crash when asked to free an already-free chunk. That was
an ugly but serviceable way of detecting coding errors that led to
double pfrees. But since that rewrite, double pfrees went through
just fine, because the "hdrmask" of a freed chunk isn't changed at all
when putting it on the freelist. We'd end with a corrupt freelist
that circularly links back to the doubly-freed chunk, which would
usually result in trouble later, far removed from the actual bug.
This situation is no good at all for debugging purposes. Fortunately,
we can fix it at low cost in MEMORY_CONTEXT_CHECKING builds by making
AllocSetFree() check for chunk->requested_size == InvalidAllocSize,
relying on the pre-existing code that sets it that way just below.
I investigated the alternative of changing a freed chunk's methodid
field, which would allow detection in non-MEMORY_CONTEXT_CHECKING
builds too. But that adds measurable overhead. Seeing that we didn't
notice this oversight for more than three years, it's hard to argue
that detecting this type of bug is worth any extra overhead in
production builds.
Likewise fix AllocSetRealloc() to detect repalloc() on a freed chunk,
and apply similar changes in generation.c and slab.c. (generation.c
would hit an Assert failure anyway, but it seems best to make it act
like aset.c.) bump.c doesn't need changes since it doesn't support
pfree in the first place. Ideally alignedalloc.c would receive
similar changes, but in debugging builds it's impossible to reach
AlignedAllocFree() or AlignedAllocRealloc() on a pfreed chunk, because
the underlying context's pfree would have wiped the chunk header of
the aligned chunk. But that means we should get an error of some
sort, so let's be content with that.
Per investigation of why the test case for bug #19438 didn't appear to
fail in v16 and up, even though the underlying bug was still present.
(This doesn't fix the underlying double-free bug, just cause it to
get detected.)
Bug: #19438
Reported-by: Dmitriy Kuzmin <kuzmin.db4@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/19438-9d37b179c56d43aa@postgresql.org
Backpatch-through: 16
Functions such as hash_numeric() are not careful to use the correct
PG_RETURN_*() macro according to the return type of that function as
defined in pg_proc. Because that function is meant to return int32,
when the hashed value exceeds 2^31, the 64-bit Datum value won't wrap to
a negative number, which means the Datum won't have the same value as it
would have had it been cast to int32 on a two's complement machine. This
isn't harmless as both datum_image_eq() and datum_image_hash() may receive
a Datum that's been formed and deformed from a tuple in some cases, and
not in other cases. When formed into a tuple, the Datum value will be
coerced into an integer according to the attlen as specified by the
TupleDesc. This can result in two Datums that should be equal being
classed as not equal, which could result in (but not limited to) an error
such as:
ERROR: could not find memoization table entry
Here we fix this by ensuring we cast the Datum value to a signed integer
according to the typLen specified in the datum_image_eq/datum_image_hash
function call before comparing or hashing.
Author: David Rowley <dgrowleyml@gmail.com>
Reported-by: Tender Wang <tndrwang@gmail.com>
Backpatch-through: 14
Discussion: https://postgr.es/m/CAHewXNmcXVFdB9_WwA8Ez0P+m_TQy_KzYk5Ri5dvg+fuwjD_yw@mail.gmail.com
pg_stat_replication is documented to keep the last measured lag values for
a short time after the standby catches up, and then set them to NULL when
there is no WAL activity. However, previously lag values could become NULL
prematurely even while WAL activity was ongoing, especially in logical
replication.
This happened because the code cleared lag when two consecutive reply messages
indicated that the apply location had caught up with the send location.
It did not verify that the reported positions were unchanged, so lag could be
cleared even when positions had advanced between messages. In logical
replication, where the apply location often quickly catches up, this issue was
more likely to occur.
This commit fixes the issue by clearing lag only when the standby reports that
it has fully replayed WAL (i.e., both flush and apply locations have caught up
with the send location) and the write/flush/apply positions remain unchanged
across two consecutive reply messages.
The second message with unchanged positions typically results from
wal_receiver_status_interval, so lag values are cleared after that interval
when there is no activity. This avoids showing stale lag data while preventing
premature NULL values.
Even with this fix, lag may rarely become NULL during activity if identical
position reports are sent repeatedly. Eliminating such duplicate messages
would address this fully, but that change is considered too invasive for stable
branches and will be handled in master only later.
Backpatch to all supported branches.
Author: Shinya Kato <shinya11.kato@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CAOzEurTzcUrEzrH97DD7+Yz=HGPU81kzWQonKZvqBwYhx2G9_A@mail.gmail.com
Backpatch-through: 14
If a CHECKPOINT record with nextMulti N is written to the WAL before
the CREATE_ID record for N, and N happens to be the first multixid on
an offset page, the backwards compatibility logic to tolerate WAL
generated by older minor versions (before commit 789d65364c) failed to
compensate for the missing XLOG_MULTIXACT_ZERO_OFF_PAGE record. In
that case, the latest_page_number was initialized at the start of WAL
replay to the page for nextMulti from the CHECKPOINT record, even if
we had not seen the CREATE_ID record for that multixid yet, which
fooled the backwards compatibility logic to think that the page was
already initialized.
To fix, track the last XLOG_MULTIXACT_ZERO_OFF_PAGE that we've seen
separately from latest_page_number. If we haven't seen any
XLOG_MULTIXACT_ZERO_OFF_PAGE records yet, use
SimpleLruDoesPhysicalPageExist() to check if the page needs to be
initialized.
Reported-by: duankunren.dkr <duankunren.dkr@alibaba-inc.com>
Analyzed-by: duankunren.dkr <duankunren.dkr@alibaba-inc.com>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://www.postgresql.org/message-id/c4ef1737-8cba-458e-b6fd-4e2d6011e985.duankunren.dkr@alibaba-inc.com
Backpatch-through: 14-18
Commit 6eedb2a5fd made the logical walsender call
XLogFlush(GetXLogInsertRecPtr()) to ensure that all pending WAL is flushed,
fixing a publisher shutdown hang. However, if the last WAL record ends at
a page boundary, GetXLogInsertRecPtr() can return an LSN pointing past
the page header, which can cause XLogFlush() to report an error.
A similar issue previously existed in the GiST code. Commit b1f14c9672
introduced GetXLogInsertEndRecPtr(), which returns a safe WAL insertion end
location (returning the start of the page when the last record ends at a page
boundary), and updated the GiST code to use it with XLogFlush().
This commit fixes the issue by making the logical walsender use
XLogFlush(GetXLogInsertEndRecPtr()) when flushing pending WAL during shutdown.
Backpatch to all supported versions.
Reported-by: Andres Freund <andres@anarazel.de>
Author: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/vzguaguldbcyfbyuq76qj7hx5qdr5kmh67gqkncyb2yhsygrdt@dfhcpteqifux
Backpatch-through: 14
The comment about ParallelWorkerNumbr in parallel.c says:
In parallel workers, it will be set to a value >= 0 and < the number
of workers before any user code is invoked; each parallel worker will
get a different parallel worker number.
However asserts in various places collecting instrumentation allowed
(ParallelWorkerNumber == num_workers). That would be a bug, as the value
is used as index into an array with num_workers entries.
Fixed by adjusting the asserts accordingly. Backpatch to all supported
versions.
Discussion: https://postgr.es/m/5db067a1-2cdf-4afb-a577-a04f30b69167@vondra.me
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Backpatch-through: 14
The function used GetXLogInsertRecPtr() to generate the fake LSN. Most
of the time this is the same as what XLogInsert() would return, and so
it works fine with the XLogFlush() call. But if the last record ends at
a page boundary, GetXLogInsertRecPtr() returns LSN pointing after the
page header. In such case XLogFlush() fails with errors like this:
ERROR: xlog flush request 0/01BD2018 is not satisfied --- flushed only to 0/01BD2000
Such failures are very hard to trigger, particularly outside aggressive
test scenarios.
Fixed by introducing GetXLogInsertEndRecPtr(), returning the correct LSN
without skipping the header. This is the same as GetXLogInsertRecPtr(),
except that it calls XLogBytePosToEndRecPtr().
Initial investigation by me, root cause identified by Andres Freund.
This is a long-standing bug in gistGetFakeLSN(), probably introduced by
c6b92041d3 in PG13. Backpatch to all supported versions.
Reported-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/vf4hbwrotvhbgcnknrqmfbqlu75oyjkmausvy66ic7x7vuhafx@e4rvwavtjswo
Backpatch-through: 14
When make_new_segment() creates an odd-sized segment, the pagemap was
only sized based on a number of usable_pages entries, forgetting that a
segment also contains metadata pages, and that the FreePageManager uses
absolute page indices that cover the entire segment. This
miscalculation could cause accesses to pagemap entries to be out of
bounds. During subsequent reuse of the allocated segment, allocations
landing on pages with indices higher than usable_pages could cause
out-of-bounds pagemap reads and/or writes. On write, 'span' pointers
are stored into the data area, corrupting the allocated objects. On
read (aka during a dsa_free), garbage is interpreted as a span pointer,
typically crashing the server in dsa_get_address().
The normal geometric path correctly sizes the pagemap for all pages in
the segment. The odd-sized path needs to do the same, but it works
forward from usable_pages rather than backward from total_size.
This commit fixes the sizing of the odd-sized case by adding pagemap
entries for the metadata pages after the initial metadata_bytes
calculation, using an integer ceiling division to compute the exact
number of additional entries needed in one go, avoiding any iteration in
the calculation.
An assertion is added in the code path for odd-sized segments, ensuring
that the pagemap includes the metadata area, and that the result is
appropriately sized.
This problem would show up depending on the size requested for the
allocation of a DSA segment. The reporter has noticed this issue when a
parallel hash join makes a DSA allocation large enough to trigger the
odd-sized segment path, but it could happen for anything that does a DSA
allocation.
A regression test is added to test_dsa, down to v17 where the test
module has been introduced. This adds a set of cheap tests to check the
problem, the new assertion being useful for this purpose. Sami has
proposed a test that took a longer time than what I have done here; the
test committed is faster and good enough to check the odd-sized
allocation path.
Author: Paul Bunn <paul.bunn@icloud.com>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/044401dcabac$fe432490$fac96db0$@icloud.com
Backpatch-through: 14
Previously, when logical replication was running, shutting down
the publisher could cause the logical walsender to enter a busy loop
and prevent the publisher from completing shutdown.
During shutdown, the logical walsender waits for all pending WAL
to be written out. However, some WAL records could remain unflushed,
causing the walsender to wait indefinitely.
The issue occurred because the walsender used XLogBackgroundFlush() to
flush pending WAL. This function does not guarantee that all WAL is written.
For example, WAL generated by a transaction without an assigned
transaction ID that aborts might not be flushed.
This commit fixes the bug by making the logical walsender call XLogFlush()
instead, ensuring that all pending WAL is written and preventing
the busy loop during shutdown.
Backpatch to all supported versions.
Author: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Reviewed-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CAO6_Xqo3co3BuUVEVzkaBVw9LidBgeeQ_2hfxeLMQcXwovB3GQ@mail.gmail.com
Backpatch-through: 14
This branch missed the IsolationUsesXactSnapshot() check. That led to EPQ on
repeatable read and serializable isolation levels. This commit fixes the
issue and provides a simple isolation check for that. Backpatch through v15
where MERGE statement was introduced.
Reported-by: Tender Wang <tndrwang@gmail.com>
Discussion: https://postgr.es/m/CAPpHfdvzZSaNYdj5ac-tYRi6MuuZnYHiUkZ3D-AoY-ny8v%2BS%2Bw%40mail.gmail.com
Author: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Backpatch-through: 15
This commit addresses two defects regarding extended statistics on
expressions:
- When building extended statistics in lookup_var_attr_stats(), the call
to examine_attribute() did not account for the possibility of a NULL
return value. This can happen depending on the behavior of a typanalyze
callback — for example, if the callback returns false, if no rows are
sampled, or if no statistics are computed. In such cases, the code
attempted to build MCV, dependency, and ndistinct statistics using a
NULL pointer, incorrectly assuming valid statistics were available,
which could lead to a server crash.
- When loading extended statistics for expressions,
statext_expressions_load() did not account for NULL entries in the
pg_statistic array storing expression statistics. Such NULL entries can
be generated when statistics collection fails for an expression, as may
occur during the final step of serialize_expr_stats(). An extended
statistics object defining N expressions requires N corresponding
elements in the pg_statistic array stored for the expressions, and some
of these elements can be NULL. This situation is reachable when a
typanalyze callback returns true, but sets stats_valid to indicate that
no useful statistics could be computed.
While these scenarios cannot occur with in-core typanalyze callbacks, as
far as I have analyzed, they can be triggered by custom data types with
custom typanalyze implementations, at least.
No tests are added in this commit. A follow-up commit will introduce a
test module that can be extended to cover similar edge cases if
additional issues are discovered. This takes care of the core of the
problem.
Attribute and relation statistics already offer similar protections:
- ANALYZE detects and skips the build of invalid statistics.
- Invalid catalog data is handled defensively when loading statistics.
This issue exists since the support for extended statistics on
expressions has been added, down to v14 as of a4d75c86bf. Backpatch
to all supported stable branches.
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/aaDrJsE1I5mrE-QF@paquier.xyz
Backpatch-through: 14
Otherwise, this would break if using C and C++ compilers from
different families and they understand different options. It already
used the right flags for compiling, this is only for linking. Also,
the meson setup already did this correctly.
Back-patch of v18 commit 365b5a345 into older supported branches.
At the time we were only aware of trouble in v18, but as shown
by buildfarm member siren, older branches can hit the problem too.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Author: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/228700.1722717983@sss.pgh.pa.us
Discussion: https://postgr.es/m/3109540.1771698685@sss.pgh.pa.us
Backpatch-through: 14-17
Previously, when one process woke another that was waiting on a lock,
ProcWakeup() incorrectly cleared its own waitStart field (i.e.,
MyProc->waitStart) instead of that of the process being awakened.
As a result, the awakened process retained a stale lock-wait start timestamp.
This did not cause user-visible issues. pg_locks.waitstart was reported as
NULL for the awakened process (i.e., when pg_locks.granted is true),
regardless of the waitStart value.
This bug was introduced by commit 46d6e5f567.
This commit fixes this by resetting the waitStart field of the process
being awakened in ProcWakeup().
Backpatch to all supported branches.
Reported-by: Chao Li <li.evan.chao@gmail.com>
Author: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: ji xu <thanksgreed@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/537BD852-EC61-4D25-AB55-BE8BE46D07D7@gmail.com
Backpatch-through: 14
Newest versions of gcc+glibc are able to detect cases where code
implicitly casts away const by assigning the result of strchr() or
a similar function applied to a "const char *" value to a target
variable that's just "char *". This of course creates a hazard of
not getting a compiler warning about scribbling on a string one was
not supposed to, so fixing up such cases is good.
This patch fixes a dozen or so places where we were doing that.
Most are trivial additions of "const" to the target variable,
since no actually-hazardous change was occurring.
Thanks to Bertrand Drouvot for finding a couple more spots than
I had.
This commit back-patches relevant portions of 8f1791c61 and
9f7565c6c into supported branches. However, there are two
places in ecpg (in v18 only) where a proper fix is more
complicated than seems appropriate for a back-patch. I opted
to silence those two warnings by adding casts.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/1324889.1764886170@sss.pgh.pa.us
Discussion: https://postgr.es/m/3988414.1771950285@sss.pgh.pa.us
Backpatch-through: 14-18
