The archive should show a dependency on the item's table, but it failed
to include one. This could cause failures in parallel restore due to
emitting ALTER TABLE ... ENABLE ROW LEVEL SECURITY before restoring
the table's data. In practice the odds of a problem seem low, since
you would typically need to have set FORCE ROW LEVEL SECURITY as well,
and you'd also need a very high --jobs count to have any chance of this
happening. That probably explains the lack of field reports.
Still, it's a bug, so back-patch to 9.5 where RLS was introduced.
Discussion: https://postgr.es/m/19784.1535390902@sss.pgh.pa.us
pg_dump with --binary-upgrade must emit ALTER EXTENSION ADD commands
for all objects that are members of extensions. It forgot to do so for
event triggers, as per bug #15310 from Nick Barnes. Back-patch to 9.3
where event triggers were introduced.
Haribabu Kommi
Discussion: https://postgr.es/m/153360083872.1395.4593932457718151600@wrigleys.postgresql.org
Commits 742869946 et al turn out to be a couple bricks shy of a load.
We were dumping the stored values of GUC_LIST_QUOTE variables as they
appear in proconfig or setconfig catalog columns. However, although that
quoting rule looks a lot like SQL-identifier double quotes, there are two
critical differences: empty strings ("") are legal, and depending on which
variable you're considering, values longer than NAMEDATALEN might be valid
too. So the current technique fails altogether on empty-string list
entries (as reported by Steven Winfield in bug #15248) and it also risks
truncating file pathnames during dump/reload of GUC values that are lists
of pathnames.
To fix, split the stored value without any downcasing or truncation,
and then emit each element as a SQL string literal.
This is a tad annoying, because we now have three copies of the
comma-separated-string splitting logic in varlena.c as well as a fourth
one in dumputils.c. (Not to mention the randomly-different-from-those
splitting logic in libpq...) I looked at unifying these, but it would
be rather a mess unless we're willing to tweak the API definitions of
SplitIdentifierString, SplitDirectoriesString, or both. That might be
worth doing in future; but it seems pretty unsafe for a back-patched
bug fix, so for now accept the duplication.
Back-patch to all supported branches, as the previous fix was.
Discussion: https://postgr.es/m/7585.1529435872@sss.pgh.pa.us
pg_dump knew about printing ALTER TABLE ... REPLICA IDENTITY USING INDEX
for indexes declared as indexes, but it failed to print that for indexes
declared as unique or primary-key constraints. Per report from Achilleas
Mantzios.
This has been broken since the feature was introduced, AFAICS.
Back-patch to 9.4.
Discussion: https://postgr.es/m/1e6cc5ad-b84a-7c07-8c08-a4d0c3cdc938@matrix.gatewaynet.com
Code that prints out the contents of setconfig or proconfig arrays in
SQL format needs to handle GUC_LIST_QUOTE variables differently from
other ones, because for those variables, flatten_set_variable_args()
already applied a layer of quoting. The value can therefore safely
be printed as-is, and indeed must be, or flatten_set_variable_args()
will muck it up completely on reload. For all other GUC variables,
it's necessary and sufficient to quote the value as a SQL literal.
We'd recognized the need for this long ago, but mis-analyzed the
need slightly, thinking that all GUC_LIST_INPUT variables needed
the special treatment. That's actually wrong, since a valid value
of a LIST variable might include characters that need quoting,
although no existing variables accept such values.
More to the point, we hadn't made any particular effort to keep the
various places that deal with this up-to-date with the set of variables
that actually need special treatment, meaning that we'd do the wrong
thing with, for example, temp_tablespaces values. This affects dumping
of SET clauses attached to functions, as well as ALTER DATABASE/ROLE SET
commands.
In ruleutils.c we can fix it reasonably honestly by exporting a guc.c
function that allows discovering the flags for a given GUC variable.
But pg_dump doesn't have easy access to that, so continue the old method
of having a hard-wired list of affected variable names. At least we can
fix it to have just one list not two, and update the list to match
current reality.
A remaining problem with this is that it only works for built-in
GUC variables. pg_dump's list obvious knows nothing of third-party
extensions, and even the "ask guc.c" method isn't bulletproof since
the relevant extension might not be loaded. There's no obvious
solution to that, so for now, we'll just have to discourage extension
authors from inventing custom GUCs that need GUC_LIST_QUOTE.
This has been busted for a long time, so back-patch to all supported
branches.
Michael Paquier and Tom Lane, reviewed by Kyotaro Horiguchi and
Pavel Stehule
Discussion: https://postgr.es/m/20180111064900.GA51030@paquier.xyz
This makes the client programs behave as documented regardless of the
connect-time search_path and regardless of user-created objects. Today,
a malicious user with CREATE permission on a search_path schema can take
control of certain of these clients' queries and invoke arbitrary SQL
functions under the client identity, often a superuser. This is
exploitable in the default configuration, where all users have CREATE
privilege on schema "public".
This changes behavior of user-defined code stored in the database, like
pg_index.indexprs and pg_extension_config_dump(). If they reach code
bearing unqualified names, "does not exist" or "no schema has been
selected to create in" errors might appear. Users may fix such errors
by schema-qualifying affected names. After upgrading, consider watching
server logs for these errors.
The --table arguments of src/bin/scripts clients have been lax; for
example, "vacuumdb -Zt pg_am\;CHECKPOINT" performed a checkpoint. That
now fails, but for now, "vacuumdb -Zt 'pg_am(amname);CHECKPOINT'" still
performs a checkpoint.
Back-patch to 9.3 (all supported versions).
Reviewed by Tom Lane, though this fix strategy was not his first choice.
Reported by Arseniy Sharoglazov.
Security: CVE-2018-1058
Historically, pg_dump has "set search_path = foo, pg_catalog" when
dumping an object in schema "foo", and has also caused that setting
to be used while restoring the object. This is problematic because
functions and operators in schema "foo" could capture references meant
to refer to pg_catalog entries, both in the queries issued by pg_dump
and those issued during the subsequent restore run. That could
result in dump/restore misbehavior, or in privilege escalation if a
nefarious user installs trojan-horse functions or operators.
This patch changes pg_dump so that it does not change the search_path
dynamically. The emitted restore script sets the search_path to what
was used at dump time, and then leaves it alone thereafter. Created
objects are placed in the correct schema, regardless of the active
search_path, by dint of schema-qualifying their names in the CREATE
commands, as well as in subsequent ALTER and ALTER-like commands.
Since this change requires a change in the behavior of pg_restore
when processing an archive file made according to this new convention,
bump the archive file version number; old versions of pg_restore will
therefore refuse to process files made with new versions of pg_dump.
Security: CVE-2018-1058
This oversight led to data corruption in matviews, manifesting as
"could not access status of transaction" before our most recent releases,
and "found xmin from before relfrozenxid" errors since then.
The proximate cause of the problem seems to have been confusion between
the task of preserving dropped-column status and the task of preserving
frozenxid status. Those are required for distinct sets of relkinds,
and the reasoning was entirely undocumented in the source code. In hopes
of forestalling future errors of the same kind, try to improve the
commentary in this area.
In passing, also improve the remarkably unhelpful comments around
pg_upgrade's set_frozenxids(). That's not actually buggy AFAICS,
but good luck figuring out what it does from the old comments.
Per report from Claudio Freire. It appears that bug #14852 from Alexey
Ermakov is an earlier report of the same issue, and there may be other
cases that we failed to identify at the time.
Patch by me based on analysis by Andres Freund. The bug dates back
to the introduction of matviews, so back-patch to all supported branches.
Discussion: https://postgr.es/m/CAGTBQpbrY9CdRGGhyBZ9yqY4jWaGC85rUF4X+R7d-aim=mBNsw@mail.gmail.com
Discussion: https://postgr.es/m/20171013115320.28049.86457@wrigleys.postgresql.org
_tocEntryRequired() expects that it can identify ACL, SECURITY LABEL,
and COMMENT TOC entries that are for large objects by seeing whether
the tag for them starts with "LARGE OBJECT ". While that works fine
for actual large objects, which are indeed tagged that way, it's
subject to false positives unless every such entry's tag starts with an
appropriate type ID. And in fact it does not work for ACLs, because
up to now we customarily tagged those entries with just the bare name
of the object. This means that an ACL for an object named
"LARGE OBJECT something" would be misclassified as data not schema,
with undesirable results in a schema-only or data-only dump ---
although pg_upgrade seems unaffected, due to the special case for
binary-upgrade mode further down in _tocEntryRequired().
We can fix this by changing all the dumpACL calls to use the label
strings already in use for comments and security labels, which do
follow the convention of starting with an object type indicator.
Well, mostly they follow it. dumpDatabase() got it wrong, using
just the bare database name for those purposes, so that a database
named "LARGE OBJECT something" would similarly be subject to having
its comment or security label dropped or included when not wanted.
Bring that into line too. (Note that up to now, database ACLs have
not been processed by pg_dump, so that this issue doesn't affect them.)
_tocEntryRequired() itself is not free of fault: it was overly liberal
about matching object tags to "LARGE OBJECT " in binary-upgrade mode.
This looks like it is probably harmless because there would be no data
component to strip anyway in that mode, but at best it's trouble
waiting to happen, so tighten that up too.
The possible misclassification of SECURITY LABEL entries for databases is
in principle a security problem, but the opportunities for actual exploits
seem too narrow to be interesting. The other cases seem like just bugs,
since an object owner can change its ACL or comment for himself, he needn't
try to trick someone else into doing it by choosing a strange name.
This has been broken since per-large-object TOC entries were introduced
in 9.0, so back-patch to all supported branches.
Discussion: https://postgr.es/m/21714.1516553459@sss.pgh.pa.us
The comment for dumpACL() got neglected when initacls and initracls were
added and the discussion of what 'racls' is wasn't very clear either.
Per complaint from Tom.
pg_dump with the --clean option failed to emit DROP EVENT TRIGGER
commands for event triggers. In a closely related oversight,
it also did not emit ALTER OWNER commands for event triggers.
Since only superusers can create event triggers, the latter oversight
is of little practical consequence ... but if we're going to record
an owner for event triggers, then surely pg_dump should preserve it.
Per complaint from Greg Atkins. Back-patch to 9.3 where event triggers
were introduced.
Discussion: https://postgr.es/m/20170722191142.yi4e7tzcg3iacclg@gmail.com
Commit 330b84d8c4 didn't contemplate the case where the public schema
has been dropped and introduced a query which fails when there is no
public schema into pg_dump (when used with -c).
Adjust the query used by pg_dump to handle the case where the public
schema doesn't exist and add tests to check that such a case no longer
fails.
Back-patch the specific fix to 9.6, as the prior commit was.
Adding tests for this case involved adding support to the pg_dump
TAP tests to work with multiple databases, which, while not a large
change, is a bit much to back-patch, so that's only done in master.
Addresses bug #14650
Discussion: https://www.postgresql.org/message-id/20170512181801.1795.47483%40wrigleys.postgresql.org
If an operator class has no operators or functions, and doesn't need
a STORAGE clause, we emitted "CREATE OPERATOR CLASS ... AS ;" which
is syntactically invalid. Fix by forcing a STORAGE clause to be
emitted anyway in this case.
(At some point we might consider changing the grammar to allow CREATE
OPERATOR CLASS without an opclass_item_list. But probably we'd want to
omit the AS in that case, so that wouldn't fix this pg_dump issue anyway.)
It's been like this all along, so back-patch to all supported branches.
Daniel Gustafsson, tweaked by me to avoid a dangling-pointer bug
Discussion: https://postgr.es/m/D9E5FC64-7A37-4F3D-B946-7E4FB468F88A@yesql.se
pg_dump has always handled the public schema in a special way when it
comes to the "--clean" option. To wit, we do not drop or recreate the
public schema in "normal" mode, but when we are run in "--clean" mode
then we do drop and recreate the public schema.
When running in "--clean" mode, the public schema is dropped and then
recreated and it is recreated with the normal schema-default privileges
of "nothing". This is unlike how the public schema starts life, which
is to have CREATE and USAGE GRANT'd to the PUBLIC role, and that is what
is recorded in pg_init_privs.
Due to this, in "--clean" mode, pg_dump would mistakenly only dump out
the set of privileges required to go from the initdb-time privileges on
the public schema to whatever the current-state privileges are. If the
privileges were not changed from initdb time, then no privileges would
be dumped out for the public schema, but with the schema being dropped
and recreated, the result was that the public schema would have no ACLs
on it instead of what it should have, which is the initdb-time
privileges.
Practically speaking, this meant that pg_dump with --clean mode dumping
a database where the ACLs on the public schema were not changed from the
default would, upon restore, result in a public schema with *no*
privileges GRANT'd, not matching the state of the existing database
(where the initdb-time privileges would have been CREATE and USAGE to
the PUBLIC role for the public schema).
To fix, adjust the query in getNamespaces() to ignore the pg_init_privs
entry for the public schema when running in "--clean" mode, meaning that
the privileges for the public schema would be dumped, correctly, as if
it was going from a newly-created schema to the current state (which is,
indeed, what will happen during the restore thanks to the DROP/CREATE).
Only the public schema is handled in this special way by pg_dump, no
other initdb-time objects are dropped/recreated in --clean mode.
Back-patch to 9.6 where the bug was introduced.
Discussion: https://postgr.es/m/3534542.o3cNaKiDID%40techfox
We attached no schema label to comments for procedural languages, casts,
transforms, operator classes, operator families, or text search objects.
The first three categories of objects don't really have schemas, but
pg_dump treats them as if they do, and it seems like the TocEntry fields
for their comments had better match the TocEntry fields for the parent
objects. (As an example of a possible hazard, the type names in a CAST
will be formatted with the assumption of a particular search_path, so
failing to ensure that this same path is active for the COMMENT ON command
could lead to an error or to attaching the comment to the wrong cast.)
In the last six cases, this was a flat-out error --- possibly mine to
begin with, but it was a long time ago.
The security label for a procedural language was likewise not correctly
labeled as to schema, and both the comment and security label for a
procedural language were not correctly labeled as to owner.
In simple cases the restore would accidentally work correctly anyway, since
these comments and security labels would normally get emitted right after
the owning object, and so the search path and active user would be correct
anyhow. But it could fail in corner cases; for example a schema-selective
restore would omit comments it should include.
Giuseppe Broccolo noted the oversight, and proposed the correct fix, for
text search dictionary objects; I found the rest by cross-checking other
dumpComment() calls. These oversights are ancient, so back-patch all
the way.
Discussion: https://postgr.es/m/CAFzmHiWwwzLjzwM4x5ki5s_PDMR6NrkipZkjNnO3B0xEpBgJaA@mail.gmail.com
When performing a pg_upgrade, we copy the files behind pg_largeobject
and pg_largeobject_metadata, allowing us to avoid having to dump out and
reload the actual data for large objects and their ACLs.
Unfortunately, that isn't all of the information which can be associated
with large objects. Currently, we also support COMMENTs and SECURITY
LABELs with large objects and these were being silently dropped during a
pg_upgrade as pg_dump would skip everything having to do with a large
object and pg_upgrade only copied the tables mentioned to the new
cluster.
As the file copies happen after the catalog dump and reload, we can't
simply include the COMMENTs and SECURITY LABELs in pg_dump's binary-mode
output but we also have to include the actual large object definition as
well. With the definition, comments, and security labels in the pg_dump
output and the file copies performed by pg_upgrade, all of the data and
metadata associated with large objects is able to be successfully pulled
forward across a pg_upgrade.
In 9.6 and master, we can simply adjust the dump bitmask to indicate
which components we don't want. In 9.5 and earlier, we have to put
explciit checks in in dumpBlob() and dumpBlobs() to not include the ACL
or the data when in binary-upgrade mode.
Adjustments made to the privileges regression test to allow another test
(large_object.sql) to be added which explicitly leaves a large object
with a comment in place to provide coverage of that case with
pg_upgrade.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/20170221162655.GE9812@tamriel.snowman.net
In commit 23f34fa, we changed how ACLs were handled to use the new
pg_init_privs catalog and to dump out the ACL commands as REVOKE+GRANT
combinations instead of trying to REVOKE all rights always and then
GRANT back just the ones which were in place.
Unfortunately, the DEFAULT PRIVILEGES system didn't quite get the
correct treatment with this change and ended up (incorrectly) only
including positive GRANTs instead of both the REVOKEs and GRANTs
necessary to preserve the correct privileges.
There are only a couple cases where such REVOKEs are possible because,
generally speaking, there's few rights which exist on objects by
default to be revoked.
Examples of REVOKEs which weren't being correctly preserved are when
privileges are REVOKE'd from the creator/owner, like so:
ALTER DEFAULT PRIVILEGES
FOR ROLE myrole
REVOKE SELECT ON TABLES FROM myrole;
or when other default privileges are being revoked, such as EXECUTE
rights granted to public for functions:
ALTER DEFAULT PRIVILEGES
FOR ROLE myrole
REVOKE EXECUTE ON FUNCTIONS FROM PUBLIC;
Fix this by correctly working out what the correct REVOKE statements are
(if any) and dump them out, just as we do for everything else.
Noticed while developing additional regression tests for pg_dump, which
will be landing shortly.
Back-patch to 9.6 where the bug was introduced.
When considering a sequence's Data entry in dumpSequenceData, we were
actually looking at the sequence definition's dump flag to decide if we
should dump the data or not. That's generally fine, except for when the
sequence data entry was created by processExtensionTables() because it's
a config sequence. In that case, the sequence itself won't be marked as
dumping data because it's part of an extension, leading to the need for
processExtensionTables() to create the sequence data entry.
This leads to extension config sequence data not being included in the
dump when it should be. Fix this by looking at the sequence data's dump
flag instead, just as dumpTableData() was doing for tables (which is why
config tables were correctly being handled), and add a regression test
to make sure we don't break it moving forward.
All of this is a bit round-about since we can now represent which
components of a given dump item should be dumped out through the dump
flag. A future improvement might be to change checkExtensionMembership()
to check for config sequences/tables and set the dump flag based on that
directly, possibly removing the need for processExtensionTables().
Bug found by Daniele Varrazzo.
Discussion: https://postgr.es/m/CA+mi_8ZmxQM7+nZ7pJ8uyfxc9V3o=UAG14dVqvftdmvw8OJ3gQ@mail.gmail.com
Patch by Michael Paquier, with some tweaking of the regression tests by
me.
Back-patch to 9.6 where the bug was introduced.
When using pg_dump --strict-names and a schema pattern which doesn't
match any schemas (eg: --schema='nonexistant*'), we were incorrectly
throwing an error claiming no tables were found when, really, there
were no schemas found:
-> pg_dump --strict-names --schema='nonexistant*'
pg_dump: no matching tables were found for pattern "nonexistant*"
Fix that by changing the error message to say 'schemas' instead, since
that is what we are actually complaining about.
Noticed while testing pg_dump error cases.
Back-patch to 9.6 where --strict-names and this error message were
introduced.
Including the program name twice is not helpful:
-> pg_dump -j -1
pg_dump: pg_dump: invalid number of parallel jobs
Correct by removing the progname from the exit_horribly() call used when
validating the number of parallel jobs.
Noticed while testing various pg_dump error cases.
Back-patch to 9.3 where parallel pg_dump was added.
findTableByOid() is allowed to return NULL and we should therefore be
checking for that case. getOwnedSeqs() and dumpSequence() shouldn't
ever actually see this happen, but given odd circumstances it might and
commit f9e439b1 probably shouldn't have removed that check.
Pointed out by Coverity. Initial patch from Michael Paquier.
Back-patch to 9.6, where that commit had removed the check.
In pg_dump.c dumpCast() and dumpTransform(), we would happily ignore the
cast or transform if it happened to use a built-in function because we
weren't including the information about built-in functions when querying
pg_proc from getFuncs().
Modify the query in getFuncs() to also gather information about
functions which are used by user-defined casts and transforms (where
"user-defined" means "has an OID >= FirstNormalObjectId"). This also
adds to the TAP regression tests for 9.6 and master to cover these
types of objects.
Back-patch all the way for casts, back to 9.5 for transforms.
Discussion: https://www.postgresql.org/message-id/flat/20160504183952.GE10850%40tamriel.snowman.net
We didn't start ensuring that all built-in objects had OIDs less than
16384 until 8.1, so for 8.0 servers we still need to query the value out
of pg_database. We need this, in particular, to distinguish which casts
were built-in and which were user-defined.
For HEAD, we only worry about going back to 8.0, for the back-branches,
we also ensure that 7.0-7.4 work.
Discussion: https://www.postgresql.org/message-id/flat/20160504183952.GE10850%40tamriel.snowman.net
getBlobs' queries for pre-9.0 servers were broken in two ways:
the 7.x/8.x query uses DISTINCT so it can't have unspecified-type
NULLs in the target list, and both that query and the 7.0 one
failed to provide the correct output column labels, so that the
subsequent code to extract data from the PGresult would fail.
Back-patch to 9.6 where the breakage was introduced (by commit 23f34fa4b).
Amit Langote and Tom Lane
Discussion: <0a3e7a0e-37bd-8427-29bd-958135862f0a@lab.ntt.co.jp>
Without this, an extension containing an access method is not properly
dumped/restored during pg_upgrade --- the AM ends up not being a member
of the extension after upgrading.
Another oversight in commit 473b93287, reported by Andrew Dunstan.
Report: <f7ac29f3-515c-2a44-21c5-ec925053265f@dunslane.net>
Faulty AND/OR nesting in the WHERE clause of getFuncs' SQL query led to
dumping range constructor functions if they are part of an extension
and we're in binary-upgrade mode. Actually, we don't want to dump them
separately even then, since CREATE TYPE AS RANGE will create the range's
constructor functions regardless. Per report from Andrew Dunstan.
It looks like this mistake was introduced by me, in commit b985d4877, in
perhaps-overzealous refactoring to reduce code duplication. I'm suitably
embarrassed.
Report: <34854939-02d7-f591-5677-ce2994104599@dunslane.net>
Previously, if a schema was created by an extension, a normal pg_dump run
(not --binary-upgrade) would summarily skip every object in that schema.
In a case where an extension creates a schema and then users create other
objects within that schema, this does the wrong thing: we want pg_dump
to skip the schema but still create the non-extension-owned objects.
There's no easy way to fix this pre-9.6, because in earlier versions the
"dump" status for a schema is just a bool and there's no way to distinguish
"dump me" from "dump my members". However, as of 9.6 we do have enough
state to represent that, so this is a simple correction of the logic in
selectDumpableNamespace.
In passing, make some cosmetic fixes in nearby code.
Martín Marqués, reviewed by Michael Paquier
Discussion: <99581032-71de-6466-c325-069861f1947d@2ndquadrant.com>
If the database has a non-default tablespace, we emitted a TABLESPACE
clause in the CREATE DATABASE command emitted by -C, even if
--no-tablespaces was also specified. This seems wrong, and it's
inconsistent with what pg_dumpall does, so change it. Per bug #14315
from Danylo Hlynskyi.
Back-patch to 9.5. The bug is much older, but it'd be a more invasive
change before 9.5 because dumpDatabase() hasn't got an easy way to get
to the outputNoTablespaces flag. Doesn't seem worth the work given
the lack of previous complaints.
Report: <20160908081953.1402.75347@wrigleys.postgresql.org>
With the refactoring of pg_dump to handle components, getOwnedSeqs needs
to be a bit more intelligent regarding which components to dump when.
Specifically, we can't simply use the owning table's components as the
set of components to dump as the table might only be including certain
components while all components of the sequence should be dumped, for
example, when the table is a member of an extension while the sequence
is not.
Handle this by combining the set of components to be dumped for the
sequence explicitly and those to be dumped for the table when setting
the components to be dumped for the sequence.
Also add a number of regression tests around this to, hopefully, catch
any future changes which break the expected behavior.
Discovered by: Philippe BEAUDOIN
Reviewed by: Michael Paquier
The original specification for this called for the deserialization function
to have signature "deserialize(serialtype) returns transtype", which is a
security violation if transtype is INTERNAL (which it always would be in
practice) and serialtype is not (which ditto). The patch blithely overrode
the opr_sanity check for that, which was sloppy-enough work in itself,
but the indisputable reason this cannot be allowed to stand is that CREATE
FUNCTION will reject such a signature and thus it'd be impossible for
extensions to create parallelizable aggregates.
The minimum fix to make the signature type-safe is to add a second, dummy
argument of type INTERNAL. But to lock it down a bit more and make misuse
of INTERNAL-accepting functions less likely, let's get rid of the ability
to specify a "serialtype" for an aggregate and just say that the only
useful serialtype is BYTEA --- which, in practice, is the only interesting
value anyway, due to the usefulness of the send/recv infrastructure for
this purpose. That means we only have to allow "serialize(internal)
returns bytea" and "deserialize(bytea, internal) returns internal" as
the signatures for these support functions.
In passing fix bogus signature of int4_avg_combine, which I found thanks
to adding an opr_sanity check on combinefunc signatures.
catversion bump due to removing pg_aggregate.aggserialtype and adjusting
signatures of assorted built-in functions.
David Rowley and Tom Lane
Discussion: <27247.1466185504@sss.pgh.pa.us>
We disable statement_timeout and lock_timeout during dump and restore, to
prevent any global settings that might exist from breaking routine backups.
Commit c6dda1f48 should have added idle_in_transaction_session_timeout to
that list, but failed to.
Another place where these timeouts get turned off is autovacuum. While
I doubt an idle timeout could fire there, it seems better to be safe than
sorry.
pg_dump issue noted by Bernd Helmle, the other one found by grepping.
Report: <352F9B77DB5D3082578D17BB@eje.land.credativ.lan>
dumpAccessMethod() didn't get the memo that we now have a bitfield for
the components which should be dumped instead of a simple boolean.
Correct that by checking if the relevant bit is set for each component
being dumped out (and not dumping it out if it isn't set).
This corrects an issue where CREATE ACCESS METHOD commands were being
included in non-binary-upgrades when an extension included an access
method (as the bloom extensions does).
Also add a regression test to make sure that we only dump out the
ACCESS METHOD commands, when they are part of an extension, when doing
a binary upgrade.
Pointed out by Thom Brown.
Formerly, Unix builds of pg_dump/pg_restore would trap SIGINT and similar
signals and set a flag that was tested in various data-transfer loops.
This was prone to errors of omission (cf commit 3c8aa6654); and even if
the client-side response was prompt, we did nothing that would cause
long-running SQL commands (e.g. CREATE INDEX) to terminate early.
Also, the master process would effectively do nothing at all upon receipt
of SIGINT; the only reason it seemed to work was that in typical scenarios
the signal would also be delivered to the child processes. We should
support termination when a signal is delivered only to the master process,
though.
Windows builds had no console interrupt handler, so they would just fall
over immediately at control-C, again leaving long-running SQL commands to
finish unmolested.
To fix, remove the flag-checking approach altogether. Instead, allow the
Unix signal handler to send a cancel request directly and then exit(1).
In the master process, also have it forward the signal to the children.
On Windows, add a console interrupt handler that behaves approximately
the same. The main difference is that a single execution of the Windows
handler can send all the cancel requests since all the info is available
in one process, whereas on Unix each process sends a cancel only for its
own database connection.
In passing, fix an old problem that DisconnectDatabase tends to send a
cancel request before exiting a parallel worker, even if nothing went
wrong. This is at least a waste of cycles, and could lead to unexpected
log messages, or maybe even data loss if it happened in pg_restore (though
in the current code the problem seems to affect only pg_dump). The cause
was that after a COPY step, pg_dump was leaving libpq in PGASYNC_BUSY
state, causing PQtransactionStatus() to report PQTRANS_ACTIVE. That's
normally harmless because the next PQexec() will silently clear the
PGASYNC_BUSY state; but in a parallel worker we might exit without any
additional SQL commands after a COPY step. So add an extra PQgetResult()
call after a COPY to allow libpq to return to PGASYNC_IDLE state.
This is a bug fix, IMO, so back-patch to 9.3 where parallel dump/restore
were introduced.
Thanks to Kyotaro Horiguchi for Windows testing and code suggestions.
Original-Patch: <7005.1464657274@sss.pgh.pa.us>
Discussion: <20160602.174941.256342236.horiguchi.kyotaro@lab.ntt.co.jp>
Parallel dump did a totally pointless query to find out the name of each
table to be dumped, which it already knows. Parallel restore runs issued
lots of redundant SET commands because _doSetFixedOutputState() was invoked
once per TOC item rather than just once at connection start. While the
extra queries are insignificant if you're dumping or restoring large
tables, it still seems worth getting rid of them.
Also, give the responsibility for selecting the right client_encoding for
a parallel dump worker to setup_connection() where it naturally belongs,
instead of having ad-hoc code for that in CloneArchive(). And fix some
minor bugs like use of strdup() where pg_strdup() would be safer.
Back-patch to 9.3, mostly to keep the branches in sync in an area that
we're still finding bugs in.
Discussion: <5086.1464793073@sss.pgh.pa.us>
Getting a synchronized snapshot is not supported on a hot standby node,
and is by default taken when using -j with multiple sessions. Trying to
do so still failed, but with a server error that would also go in the
log. Instead, proprely detect this case and give a better error message.
For some reason the code to emit a warning and switch to uncompressed
output was placed down in the guts of pg_backup_archiver.c. This is
definitely too late in the case of parallel operation (and I rather
wonder if it wasn't too late for other purposes as well). Put it in
pg_dump.c's option-processing logic, which seems a much saner place.
Also, the default behavior with custom or directory output format was
to emit the warning telling you the output would be uncompressed. This
seems unhelpful, so silence that case.
Back-patch to 9.3 where parallel dump was introduced.
Kyotaro Horiguchi, adjusted a bit by me
Report: <20160526.185551.242041780.horiguchi.kyotaro@lab.ntt.co.jp>
All of the other tables used in the query in dumpTable(), which is
collecting column-level ACLs, are qualified, so we should be qualifying
the pg_init_privs, the related sub-select against pg_class and the
other queries added by the pg_dump catalog ACLs work.
Also, use ::regclass (or ::pg_catalog.regclass, where appropriate)
instead of using a poorly constructed query to get the OID for various
catalog tables.
Issues identified by Noah and Alvaro, patch by me.
This TAP test suite will create a new cluster, populate it based on
the 'create_sql' values in the '%tests' hash, run all of the runs
defined in the '%pgdump_runs' hash, and then for each test in the
'%tests' hash, compare each run's output the the regular expression
defined for the test under the 'like' and 'unlike' functions, as
appropriate.
While this test suite covers a fair bit of ground (67% of pg_dump.c
and quite a bit of the other files in src/bin/pg_dump), there is
still quite a bit which remains to be added to provide better code
coverage. Still, this is quite a bit better than we had, and has
found a few bugs already (note that the CREATE TRANSFORM test is
commented out, as it is currently failing).
Idea for using the TAP system from Tom, though all of the code is mine.
Reviewing the cases where we need to LOCK a given table during a dump,
it was pointed out by Tom that we really don't need to LOCK a table if
we are only looking to dump the ACL for it, or certain other
components. After reviewing the queries run for all of the component
pieces, a list of components were determined to not require LOCK'ing
of the table.
This implements a check to avoid LOCK'ing those tables.
Initial complaint from Rushabh Lathia, discussed with Robert and Tom,
the patch is mine.
Do not try to dump objects which do not have ACLs when only ACLs are
being requested. This results in a significant performance improvement
as we can avoid querying for further information on these objects when
we don't need to.
When limiting the components to dump for an extension, consider what
components have been requested. Initially, we incorrectly hard-coded
the components of the extension objects to dump, which would mean that
we wouldn't dump some components even with they were asked for and in
other cases we would dump components which weren't requested.
Correct defaultACLs to use 'dump_contains' instead of 'dump'. The
defaultACL is considered a member of the namespace and should be
dumped based on the same set of components that the other objects in
the schema are, not based on what we're dumping for the namespace
itself (which might not include ACLs, if the namespace has just the
default or initial ACL).
Use DUMP_COMPONENT_ACL for from-initdb objects, to allow users to
change their ACLs, should they wish to. This just extends what we
are doing for the pg_catalog namespace to objects which are not
members of namespaces.
Due to column ACLs being treated a bit differently from other ACLs
(they are actually reset to NULL when all privileges are revoked),
adjust the query which gathers column-level ACLs to consider all of
the ACL-relevant columns.
The query to grab the function/aggregate information is now joining
to pg_init_privs, so we can simplify (and correct) the WHERE clause
used to determine if a given function's ACL has changed from the
initial ACL on the function.
Bug found by Noah, patch by me.
Move fmtReloptionsArray() from pg_dump.c to string_utils.c so that it
is available to other frontend code. In particular psql's \ev and \sv
commands need it to handle view reloptions. Also rename the function
to appendReloptionsArray(), which is a more accurate description of
what it does.
Author: Dean Rasheed
Reviewed-by: Peter Eisentraut
Discussion: http://www.postgresql.org/message-id/CAEZATCWZjCgKRyM-agE0p8ax15j9uyQoF=qew7D2xB6cF76T8A@mail.gmail.com
As reported by Michael Feld, pg_upgrade'ing an installation having
extensions with operator families that contain just a single operator class
failed to reproduce the extension membership of those operator families.
This caused no immediate ill effects, but would create problems when later
trying to do a plain dump and restore, because the seemingly-not-part-of-
the-extension operator families would appear separately in the pg_dump
output, and then would conflict with the families created by loading the
extension. This has been broken ever since extensions were introduced,
and many of the standard contrib extensions are affected, so it's a bit
astonishing nobody complained before.
The cause of the problem is a perhaps-ill-considered decision to omit
such operator families from pg_dump's output on the grounds that the
CREATE OPERATOR CLASS commands could recreate them, and having explicit
CREATE OPERATOR FAMILY commands would impede loading the dump script into
pre-8.3 servers. Whatever the merits of that decision when 8.3 was being
written, it looks like a poor tradeoff now. We can fix the pg_upgrade
problem simply by removing that code, so that the operator families are
dumped explicitly (and then will be properly made to be part of their
extensions).
Although this fixes the behavior of future pg_upgrade runs, it does nothing
to clean up existing installations that may have improperly-linked operator
families. Given the small number of complaints to date, maybe we don't
need to worry about providing an automated solution for that; anyone who
needs to clean it up can do so with manual "ALTER EXTENSION ADD OPERATOR
FAMILY" commands, or even just ignore the duplicate-opfamily errors they
get during a pg_restore. In any case we need this fix.
Back-patch to all supported branches.
Discussion: <20228.1460575691@sss.pgh.pa.us>
