Previously, we'd compress only when the active range of array entries
reached Max(4 * PROCARRAY_MAXPROCS, 2 * pArray->numKnownAssignedXids).
If max_connections is large, the first term could result in not
compressing for a long time, resulting in much wastage of cycles in
hot-standby backends scanning the array to take snapshots. Get rid
of that term, and just bound it to 2 * pArray->numKnownAssignedXids.
That however creates the opposite risk, that we might spend too much
effort compressing. Hence, consider compressing only once every 128
commit records. (This frequency was chosen by benchmarking. While
we only tried one benchmark scenario, the results seem stable over
a fairly wide range of frequencies.)
Also, force compression when processing RecoveryInfo WAL records
(which should be infrequent); the old code could perform compression
then, but would do so only after the same array-range check as for
the transaction-commit path.
Also, opportunistically run compression if the startup process is about
to wait for WAL, though not oftener than once a second. This should
prevent cases where we waste lots of time by leaving the array
not-compressed for long intervals due to low WAL traffic.
Lastly, add a simple check to keep us from uselessly compressing
when the array storage is already compact.
Back-patch, as the performance problem is worse in pre-v14 branches
than in HEAD.
Simon Riggs and Michail Nikolaev, with help from Tom Lane and
Andres Freund.
Discussion: https://postgr.es/m/CALdSSPgahNUD_=pB_j=1zSnDBaiOtqVfzo8Ejt5J_k7qZiU1Tw@mail.gmail.com
If we have no special-case code in s_lock.h for the current platform,
but the compiler has __sync_lock_test_and_set, use that instead of
failing. It's unlikely that anybody's __sync_lock_test_and_set
would be so awful as to be worse than our semaphore-based fallback,
but if it is, they can (continue to) use --disable-spinlocks.
This allows removal of the RISC-V special case installed by commit
c32fcac56, which generated exactly the same code but only on that
platform. Usefully, the RISC-V buildfarm animals should now test
at least the int variant of this patch.
I've manually tested both variants on ARM by dint of removing the
ARM-specific stanza. We don't want to drop that, because it already
has some special knowledge and is likely to grow more over time.
Likewise, this is not meant to preclude installing special cases
for other arches if that proves worthwhile.
Per discussion of a request to install the same code for loongarch64.
Like the previous patch, we might as well back-patch to supported
branches.
Discussion: https://postgr.es/m/761ac43d44b84d679ba803c2bd947cc0@HSMAILSVR04.hs.handsome.com.cn
dshash.c previously maintained flags to be able to assert that you
didn't hold any partition lock. These flags could get out of sync with
reality in error scenarios.
Get rid of all that, and make assertions about the locks themselves
instead. Since LWLockHeldByMe() loops internally, we don't want to put
that inside another loop over all partition locks. Introduce a new
debugging-only interface LWLockAnyHeldByMe() to avoid that.
This problem was noted by Tom and Andres while reviewing changes to
support the new shared memory stats system, and later showed up in
reality while working on commit 389869af.
Back-patch to 11, where dshash.c arrived.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220311012712.botrpsikaufzteyt@alap3.anarazel.de
Discussion: https://postgr.es/m/CA%2BhUKGJ31Wce6HJ7xnVTKWjFUWQZPBngxfJVx4q0E98pDr3kAw%40mail.gmail.com
This reverts most of 91c0570a79, f28bf667f6, fe0972ee5e, afdeff1052. The
only thing left is the retry loop in 019_replslot_limit.pl that avoids
spurious failures by retrying a couple times.
We haven't seen any hard evidence that this is caused by anything but slow
process shutdown. We did not find any cases where walsenders did not vanish
after waiting for longer. Therefore there's no reason for this debugging code
to remain.
Discussion: https://postgr.es/m/20220530190155.47wr3x2prdwyciah@alap3.anarazel.de
Backpatch: 15-
With the old logic, when the reciever had not yet attached, we would
never call shm_mq_inc_bytes_written(), even if force_flush = true
was specified. That could result in a situation where data that the
sender believes it has sent is never received.
Along the way, remove a useless function prototype for a nonexistent
function from shm_mq.h.
Commit 46846433a0 introduced these
problems.
Pavan Deolasee, with a few changes by me.
Discussion: https://postgr.es/m/CABOikdPkwtLLCTnzzmpSMXo3QZa2yXq0J7Q61ssdLFAJYrOVvQ@mail.gmail.com
This is a slight, convenient semantics change from what commit
0f0cfb4940 ("Fix parallel operations that prevent oldest xmin from
advancing") introduced that lets us simplify the coding in the one place
where it is used.
Backpatch to 13. This is related to commit 6fea65508a ("Tighten
ComputeXidHorizons' handling of walsenders") rewriting the code site
where this is used, which has not yet been backpatched, but it may well
be in the future.
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/202204191637.eldwa2exvguw@alvherre.pgsql
With sufficiently bad luck, it was possible for IssuePendingWritebacks()
to reopen a file after we'd processed PROCSIGNAL_BARRIER_SMGRRELEASE and
before the file was unlinked by some other backend. That left a small
hole in commit 4eb21763's plan to fix all spurious errors from DROP
TABLESPACE and similar on Windows.
Fix by closing md.c's segments, instead of just closing fd.c's
descriptors, and then teaching smgrwriteback() not to open files that
aren't already open.
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20220209220004.kb3dgtn2x2k2gtdm%40alap3.anarazel.de
This reverts commits 2c902bb and ccfbd92. Per buildfarm members
kestrel, rorqual and calliphoridae, the assertions checking that a TLI
history file should not exist when created by a WAL receiver have been
failing, and switching to durable_rename() over durable_rename_excl()
would cause the newest TLI history file to overwrite the existing one.
We need to think harder about such cases, so revert the new logic for
now.
Note that all the failures have been reported in the test
025_stuck_on_old_timeline.
Discussion: https://postgr.es/m/511362.1651116498@sss.pgh.pa.us
ccfbd92 has replaced all existing in-core callers of this function in
favor of durable_rename(). durable_rename_excl() is by nature unsafe on
crashes happening at the wrong time, so just remove it.
Author: Nathan Bossart
Reviewed-by: Robert Haas, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/20220407182954.GA1231544@nathanxps13
ComputeXidHorizons (nee GetOldestXmin) thought that it could identify
walsenders by checking for proc->databaseId == 0. Perhaps that was
safe when the code was written, but it's been wrong at least since
autovacuum was invented. Background processes that aren't connected
to any particular database, such as the autovacuum launcher and
logical replication launcher, look like that too.
This imprecision is harmful because when such a process advertises an
xmin, the result is to hold back dead-tuple cleanup in all databases,
though it'd be sufficient to hold it back in shared catalogs (which
are the only relations such a process can access). Aside from being
generally inefficient, this has recently been seen to cause regression
test failures in the buildfarm, as a consequence of the logical
replication launcher's startup transaction preventing VACUUM from
marking pages of a user table as all-visible.
We only want that global hold-back effect for the case where a
walsender is advertising a hot standby feedback xmin. Therefore,
invent a new PGPROC flag that says that a process' xmin should be
considered globally, and check that instead of using the incorrect
databaseId == 0 test. Currently only a walsender sets that flag,
and only if it is not connected to any particular database. (This is
for bug-compatibility with the undocumented behavior of the existing
code, namely that feedback sent by a client who has connected to a
particular database would not be applied globally. I'm not sure this
is a great definition; however, such a client is capable of issuing
plain SQL commands, and I don't think we want xmins advertised for
such commands to be applied globally. Perhaps this could do with
refinement later.)
While at it, I rewrote the comment in ComputeXidHorizons, and
re-ordered the commented-upon if-tests, to make them match up
for intelligibility's sake.
This is arguably a back-patchable bug fix, but given the lack of
complaints I think it prudent to let it age awhile in HEAD first.
Discussion: https://postgr.es/m/1346227.1649887693@sss.pgh.pa.us
Before commit 412ad7a556, delayChkpt
was a Boolean. Now it's an integer. Extensions using it need to be
appropriately updated, so let's rename the field to make sure that
a hard compilation failure occurs.
Replacing delayChkpt with delayChkptFlags made a few comments extend
past 80 characters, so I reflowed them and changed some wording very
slightly.
The back-branches will need a different change to restore compatibility
with existing minor releases; this is just for master.
Per suggestion from Tom Lane.
Discussion: http://postgr.es/m/a7880f4d-1d74-582a-ada7-dad168d046d1@enterprisedb.com
Up until now, we've had a policy of only marking certain variables
in the PostgreSQL header files with PGDLLIMPORT, but now we've
decided to mark them all. This means that extensions running on
Windows should no longer operate at a disadvantage as compared to
extensions running on Linux: if the variable is present in a header
file, it should be accessible.
Discussion: http://postgr.es/m/CA+TgmoYanc1_FSfimhgiWSqVyP5KKmh5NP2BWNwDhO8Pg2vGYQ@mail.gmail.com
Previously the statistics collector received statistics updates via UDP and
shared statistics data by writing them out to temporary files regularly. These
files can reach tens of megabytes and are written out up to twice a
second. This has repeatedly prevented us from adding additional useful
statistics.
Now statistics are stored in shared memory. Statistics for variable-numbered
objects are stored in a dshash hashtable (backed by dynamic shared
memory). Fixed-numbered stats are stored in plain shared memory.
The header for pgstat.c contains an overview of the architecture.
The stats collector is not needed anymore, remove it.
By utilizing the transactional statistics drop infrastructure introduced in a
prior commit statistics entries cannot "leak" anymore. Previously leaked
statistics were dropped by pgstat_vacuum_stat(), called from [auto-]vacuum. On
systems with many small relations pgstat_vacuum_stat() could be quite
expensive.
Now that replicas drop statistics entries for dropped objects, it is not
necessary anymore to reset stats when starting from a cleanly shut down
replica.
Subsequent commits will perform some further code cleanup, adapt docs and add
tests.
Bumps PGSTAT_FILE_FORMAT_ID.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: "David G. Johnston" <david.g.johnston@gmail.com>
Reviewed-By: Tomas Vondra <tomas.vondra@2ndquadrant.com> (in a much earlier version)
Reviewed-By: Arthur Zakirov <a.zakirov@postgrespro.ru> (in a much earlier version)
Reviewed-By: Antonin Houska <ah@cybertec.at> (in a much earlier version)
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
Discussion: https://postgr.es/m/20210319235115.y3wz7hpnnrshdyv6@alap3.anarazel.de
This seems beneficial on high-core-count machines, and not harmful
on lesser hardware. However, older ARM32 gear doesn't have this
instruction, so restrict the patch to ARM64.
Geoffrey Blake
Discussion: https://postgr.es/m/78338F29-9D7F-4DC8-BD71-E9674CE71425@amazon.com
Because this strategy logs changes on a block-by-block basis, it
avoids the need to checkpoint before and after the operation.
However, because it logs each changed block individually, it might
generate a lot of extra write-ahead logging if the template database
is large. Therefore, the older strategy remains available via a new
STRATEGY parameter to CREATE DATABASE, and a corresponding --strategy
option to createdb.
Somewhat controversially, this patch assembles the list of relations
to be copied to the new database by reading the pg_class relation of
the template database. Cross-database access like this isn't normally
possible, but it can be made to work here because there can't be any
connections to the database being copied, nor can it contain any
in-doubt transactions. Even so, we have to use lower-level interfaces
than normal, since the table scan and relcache interfaces will not
work for a database to which we're not connected. The advantage of
this approach is that we do not need to rely on the filesystem to
determine what ought to be copied, but instead on PostgreSQL's own
knowledge of the database structure. This avoids, for example,
copying stray files that happen to be located in the source database
directory.
Dilip Kumar, with a fairly large number of cosmetic changes by me.
Reviewed and tested by Ashutosh Sharma, Andres Freund, John Naylor,
Greg Nancarrow, Neha Sharma. Additional feedback from Bruce Momjian,
Heikki Linnakangas, Julien Rouhaud, Adam Brusselback, Kyotaro
Horiguchi, Tomas Vondra, Andrew Dunstan, Álvaro Herrera, and others.
Discussion: http://postgr.es/m/CA+TgmoYtcdxBjLh31DLxUXHxFVMPGzrU5_T=CYCvRyFHywSBUQ@mail.gmail.com
If TRUNCATE causes some buffers to be invalidated and thus the
checkpoint does not flush them, TRUNCATE must also ensure that the
corresponding files are truncated on disk. Otherwise, a replay
from the checkpoint might find that the buffers exist but have
the wrong contents, which may cause replay to fail.
Report by Teja Mupparti. Patch by Kyotaro Horiguchi, per a design
suggestion from Heikki Linnakangas, with some changes to the
comments by me. Review of this and a prior patch that approached
the issue differently by Heikki Linnakangas, Andres Freund, Álvaro
Herrera, Masahiko Sawada, and Tom Lane.
Discussion: http://postgr.es/m/BYAPR06MB6373BF50B469CA393C614257ABF00@BYAPR06MB6373.namprd06.prod.outlook.com
There's no visible point in casting the result of a comparison to
bool, because it already is that, at least on C99 compilers.
I see no point in these assertions that a pointer we're about to
dereference isn't null, either. If it is, the resulting SIGSEGV
will notify us of the problem just fine.
Noted while reviewing Zhihong Yu's patch. This is basically
cosmetic, so no need for back-patch.
Discussion: https://postgr.es/m/CALNJ-vT9r0DSsAOw9OXVJFxLENoVS_68kJ5x0p44atoYH+H4dg@mail.gmail.com
This macro cast the result to BlockNumber after shifting, not before,
which is the wrong thing. Per the C spec, the uint16 fields would
promote to int not unsigned int, so that (for 32-bit int) the shift
potentially shifts a nonzero bit into the sign position. I doubt
there are any production systems where this would actually end with
the wrong answer, but it is undefined behavior per the C spec, and
clang's -fsanitize=undefined option reputedly warns about it on some
platforms. (I can't reproduce that right now, but the code is
undeniably wrong per spec.) It's easy to fix by casting to
BlockNumber (uint32) in the proper places.
It's been wrong for ages, so back-patch to all supported branches.
Report and patch by Zhihong Yu (cosmetic tweaking by me)
Discussion: https://postgr.es/m/CALNJ-vT9r0DSsAOw9OXVJFxLENoVS_68kJ5x0p44atoYH+H4dg@mail.gmail.com
See also afdeff1052. Failures after that commit provided a few more hints,
but not yet enough to understand what's going on.
In 019_replslot_limit.pl shut down nodes with fast instead of immediate mode
if we observe the failure mode. That should tell us whether the failures we're
observing are just a timing issue under high load. PGCTLTIMEOUT should prevent
buildfarm animals from hanging endlessly.
Also adds a bit more logging to replication slot drop and ShutdownPostgres().
Discussion: https://postgr.es/m/20220225192941.hqnvefgdzaro6gzg@alap3.anarazel.de
Provide a way for WaitEventSet to report that the remote peer has shut
down its socket, independently of whether there is any buffered data
remaining to be read. This works only on systems where the kernel
exposes that information, namely:
* WAIT_USE_POLL builds using POLLRDHUP, if available
* WAIT_USE_EPOLL builds using EPOLLRDHUP
* WAIT_USE_KQUEUE builds using EV_EOF
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Maksim Milyutin <milyutinma@gmail.com>
Discussion: https://postgr.es/m/77def86b27e41f0efcba411460e929ae%40postgrespro.ru
Previously, it was possible for DROP DATABASE, DROP TABLESPACE and ALTER
DATABASE SET TABLESPACE to fail because other backends still had file
handles open for dropped tables. Windows won't allow a directory
containing unlinked-but-still-open files to be unlinked. Tackle this
problem by forcing all backends to close all smgr fds. No change for
Unix systems, which don't suffer from the problem, but the new code path
can be tested by Unix-based developers by defining
USE_BARRIER_SMGRRELEASE explicitly.
It's possible that PROCSIGNAL_BARRIER_SMGRRELEASE will have more
bug-fixing applications soon (under discussion). Note that this is the
first user of the ProcSignalBarrier mechanism from commit 16a4e4aec. It
could in principle be back-patched as far as 14, but since field
complaints are rare and ProcSignalBarrier hasn't been battle-tested,
that seems like a bad idea. Fix in master only, where these failures
have started to show up in automated testing due to new tests.
Suggested-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CA+hUKGLdemy2gBm80kz20GTe6hNVwoErE8KwcJk6-U56oStjtg@mail.gmail.com
Instead of referring to target backends by pid, use pgprocno. This
means that we don't have to scan the ProcArray and we can drop some
special case code for dealing with the startup process.
Discussion: https://postgr.es/m/CA%2BhUKGLYRyDaneEwz5Uya_OgFLMx5BgJfkQSD%3Dq9HmwsfRRb-w%40mail.gmail.com
Reviewed-by: Soumyadeep Chakraborty <soumyadeep2007@gmail.com>
Reviewed-by: Ashwin Agrawal <ashwinstar@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
While determining xid horizons, we skip over backends that are running
Vacuum. We also ignore Create Index Concurrently, or Reindex Concurrently
for the purposes of computing Xmin for Vacuum. But we were not setting the
flags corresponding to these operations when they are performed in
parallel which was preventing Xid horizon from advancing.
The optimization related to skipping Create Index Concurrently, or Reindex
Concurrently operations was implemented in PG-14 but the fix is the same
for the Parallel Vacuum as well so back-patched till PG-13.
Author: Masahiko Sawada
Reviewed-by: Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/CAD21AoCLQqgM1sXh9BrDFq0uzd3RBFKi=Vfo6cjjKODm0Onr5w@mail.gmail.com
The purpose of commit 8a54e12a38 was to
fix this, and it sufficed when the PREPARE TRANSACTION completed before
the CIC looked for lock conflicts. Otherwise, things still broke. As
before, in a cluster having used CIC while having enabled prepared
transactions, queries that use the resulting index can silently fail to
find rows. It may be necessary to reindex to recover from past
occurrences; REINDEX CONCURRENTLY suffices. Fix this for future index
builds by making CIC wait for arbitrarily-recent prepared transactions
and for ordinary transactions that may yet PREPARE TRANSACTION. As part
of that, have PREPARE TRANSACTION transfer locks to its dummy PGPROC
before it calls ProcArrayClearTransaction(). Back-patch to 9.6 (all
supported versions).
Andrey Borodin, reviewed (in earlier versions) by Andres Freund.
Discussion: https://postgr.es/m/01824242-AA92-4FE9-9BA7-AEBAFFEA3D0C@yandex-team.ru
Do not update shm_mq's mq_bytes_written until we have written
an amount of data greater than 1/4th of the ring size, unless
the caller of shm_mq_send(v) requests a flush at the end of
the message. This reduces the number of calls to SetLatch(),
and also the number of CPU cache misses, considerably, and thus
makes shm_mq significantly faster.
Dilip Kumar, reviewed by Zhihong Yu and Tomas Vondra. Some
minor cosmetic changes by me.
Discussion: http://postgr.es/m/CAFiTN-tVXqn_OG7tHNeSkBbN+iiCZTiQ83uakax43y1sQb2OBA@mail.gmail.com
This runtime-computed GUC shows the number of huge pages required
for the server's main shared memory area, taking advantage of the
work done in 0c39c29 and 0bd305e. This is useful for users to estimate
the amount of huge pages required for a server as it becomes possible to
do an estimation without having to start the server and potentially
allocate a large chunk of shared memory.
The number of huge pages is calculated based on the existing GUC
huge_page_size if set, or by using the system's default by looking at
/proc/meminfo on Linux. There is nothing new here as this commit reuses
the existing calculation methods, and just exposes this information
directly to the user. The routine calculating the huge page size is
refactored to limit the number of files with platform-specific flags.
This new GUC's name was the most popular choice based on the discussion
done. This is only supported on Linux.
I have taken the time to test the change on Linux, Windows and MacOS,
though for the last two ones large pages are not supported. The first
one calculates correctly the number of pages depending on the existing
GUC huge_page_size or the system's default.
Thanks to Andres Freund, Robert Haas, Kyotaro Horiguchi, Tom Lane,
Justin Pryzby (and anybody forgotten here) for the discussion.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
This runtime-computed GUC shows the size of the server's main shared
memory area, taking into account the amount of shared memory allocated
by extensions as this is calculated after processing
shared_preload_libraries.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
This change refactors the shared memory size calculation in
CreateSharedMemoryAndSemaphores() to its own function. This is intended
for use in a future change related to the setup of huge pages and shared
memory with some GUCs, while useful on its own for extensions.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
Use one fileset for the entire worker lifetime instead of using
separate filesets for each streaming transaction. Now, the
changes/subxacts files for every streaming transaction will be
created under the same fileset and the files will be deleted
after the transaction is completed.
This patch extends the BufFileOpenFileSet and BufFileDeleteFileSet
APIs to allow users to specify whether to give an error on missing
files.
Author: Dilip Kumar, based on suggestion by Thomas Munro
Reviewed-by: Hou Zhijie, Masahiko Sawada, Amit Kapila
Discussion: https://postgr.es/m/E1mCC6U-0004Ik-Fs@gemulon.postgresql.org
Move fileset related implementation out of sharedfileset.c to allow its
usage by backends that don't want to share filesets among different
processes. After this split, fileset infrastructure is used by both
sharedfileset.c and worker.c for the named temporary files that survive
across transactions.
Author: Dilip Kumar, based on suggestion by Andres Freund
Reviewed-by: Hou Zhijie, Masahiko Sawada, Amit Kapila
Discussion: https://postgr.es/m/E1mCC6U-0004Ik-Fs@gemulon.postgresql.org
Like the ARM case, just use gcc's __sync_lock_test_and_set();
that will compile into AMOSWAP.W.AQ which does what we need.
At some point it might be worth doing some work on atomic ops
for RISC-V, but this should be enough for a creditable port.
Back-patch to all supported branches, just in case somebody
wants to try them on RISC-V.
Marek Szuba
Discussion: https://postgr.es/m/dea97b6d-f55f-1f6d-9109-504aa7dfa421@gentoo.org
As reported by a few OSX buildfarm animals there exist at least one path where
temporary files exist during AtProcExit_Files() processing. As temporary file
cleanup causes pgstat reporting, the assertions added in ee3f8d3d3a caused
failures.
This is not an OSX specific issue, we were just lucky that timing on OSX
reliably triggered the problem. The known way to cause this is a FATAL error
during perform_base_backup() with a MANIFEST used - adding an elog(FATAL)
after InitializeBackupManifest() reliably reproduces the problem in isolation.
The problem is that the temporary file created in InitializeBackupManifest()
is not cleaned up via resource owner cleanup as WalSndResourceCleanup()
currently is only used for non-FATAL errors. That then allows to reach
AtProcExit_Files() with existing temporary files, causing the assertion
failure.
To fix this problem, move temporary file cleanup to a before_shmem_exit() hook
and add assertions ensuring that no temporary files are created before / after
temporary file management has been initialized / shut down. The cleanest way
to do so seems to be to split fd.c initialization into two, one for plain file
access and one for temporary file access.
Right now there's no need to perform further fd.c cleanup during process exit,
so I just renamed AtProcExit_Files() to BeforeShmemExit_Files(). Alternatively
we could perform another pass through the files to check that no temporary
files exist, but the added assertions seem to provide enough protection
against that.
It might turn out that the assertions added in ee3f8d3d3a will cause too much
noise - in that case we'll have to downgrade them to a WARNING, at least
temporarily.
This commit is not necessarily the best approach to address this issue, but it
should resolve the buildfarm failures. We can revise later.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210807190131.2bm24acbebl4wl6i@alap3.anarazel.de
For EXEC_BACKEND InitProcess()/InitAuxiliaryProcess() needs to have been
called well before we call BaseInit(), as SubPostmasterMain() needs LWLocks to
work. Having the order of initialization differ between platforms makes it
unnecessarily hard to understand the system and to add initialization points
for new subsystems without a lot of duplication.
To be able to change the order, BaseInit() cannot trigger
CreateSharedMemoryAndSemaphores() anymore - obviously that needs to have
happened before we can call InitProcess(). It seems cleaner to create shared
memory explicitly in single user/bootstrap mode anyway.
After this change the separation of bufmgr initialization into
InitBufferPoolAccess() / InitBufferPoolBackend() is not meaningful anymore so
the latter is removed.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20210802164124.ufo5buo4apl6yuvs@alap3.anarazel.de
Start up the checkpointer and bgwriter during crash recovery (except in
--single mode), as we do for replication. This wasn't done back in
commit cdd46c76 out of caution. Now it seems like a better idea to make
the environment as similar as possible in both cases. There may also be
some performance advantages.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Discussion: https://postgr.es/m/CA%2BhUKGJ8NRsqgkZEnsnRc2MFROBV-jCnacbYvtpptK2A9YYp9Q%40mail.gmail.com
Macs don't understand O_DIRECT, but they can disable caching with a
separate fcntl() call. Extend the file opening functions in fd.c to
handle this for us if the caller passes in PG_O_DIRECT.
For now, this affects only WAL data and even then only if you set:
max_wal_senders=0
wal_level=minimal
This is not expected to be very useful on its own, but later proposed
patches will make greater use of direct I/O, and it'll be useful for
testing if developers on Macs can see the effects.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKG%2BADiyyHe0cun2wfT%2BSVnFVqNYPxoO6J9zcZkVO7%2BNGig%40mail.gmail.com
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
If you know the ID of a buffer that recently held a block that you would
like to pin, this function can be used check if it's still there. It
can be used to avoid a second lookup in the buffer mapping table after
PrefetchBuffer() reports a cache hit.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq=AovOddfHpA@mail.gmail.com
Teach VACUUM to truncate the line pointer array of each heap page when a
contiguous group of LP_UNUSED line pointers appear at the end of the
array -- these unused and unreferenced items are excluded. This process
occurs during VACUUM's second pass over the heap, right after LP_DEAD
line pointers on the page (those encountered/pruned during the first
pass) are marked LP_UNUSED.
Truncation avoids line pointer bloat with certain workloads,
particularly those involving continual range DELETEs and bulk INSERTs
against the same table.
Also harden heapam code to check for an out-of-range page offset number
in places where we weren't already doing so.
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAEze2WjgaQc55Y5f5CQd3L=eS5CZcff2Obxp=O6pto8-f0hC4w@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-Wzn6a64PJM1Ggzm=uvx2otsopJMhFQj_g1rAj4GWr3ZSzw@mail.gmail.com
Commit 3e98c0bafb added pg_backend_memory_contexts view to display
the memory contexts of the backend process. However its target process
is limited to the backend that is accessing to the view. So this is
not so convenient when investigating the local memory bloat of other
backend process. To improve this situation, this commit adds
pg_log_backend_memory_contexts() function that requests to log
the memory contexts of the specified backend process.
This information can be also collected by calling
MemoryContextStats(TopMemoryContext) via a debugger. But
this technique cannot be used in some environments because no debugger
is available there. So, pg_log_backend_memory_contexts() allows us to
see the memory contexts of specified backend more easily.
Only superusers are allowed to request to log the memory contexts
because allowing any users to issue this request at an unbounded rate
would cause lots of log messages and which can lead to denial of service.
On receipt of the request, at the next CHECK_FOR_INTERRUPTS(),
the target backend logs its memory contexts at LOG_SERVER_ONLY level,
so that these memory contexts will appear in the server log but not
be sent to the client. It logs one message per memory context.
Because if it buffers all memory contexts into StringInfo to log them
as one message, which may require the buffer to be enlarged very much
and lead to OOM error since there can be a large number of memory
contexts in a backend.
When a backend process is consuming huge memory, logging all its
memory contexts might overrun available disk space. To prevent this,
now this patch limits the number of child contexts to log per parent
to 100. As with MemoryContextStats(), it supposes that practical cases
where the log gets long will typically be huge numbers of siblings
under the same parent context; while the additional debugging value
from seeing details about individual siblings beyond 100 will not be large.
There was another proposed patch to add the function to return
the memory contexts of specified backend as the result sets,
instead of logging them, in the discussion. However that patch is
not included in this commit because it had several issues to address.
Thanks to Tatsuhito Kasahara, Andres Freund, Tom Lane, Tomas Vondra,
Michael Paquier, Kyotaro Horiguchi and Zhihong Yu for the discussion.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Kyotaro Horiguchi, Zhihong Yu, Fujii Masao
Discussion: https://postgr.es/m/0271f440ac77f2a4180e0e56ebd944d1@oss.nttdata.com
This implements asynchronous execution, which runs multiple parts of a
non-parallel-aware Append concurrently rather than serially to improve
performance when possible. Currently, the only node type that can be
run concurrently is a ForeignScan that is an immediate child of such an
Append. In the case where such ForeignScans access data on different
remote servers, this would run those ForeignScans concurrently, and
overlap the remote operations to be performed simultaneously, so it'll
improve the performance especially when the operations involve
time-consuming ones such as remote join and remote aggregation.
We may extend this to other node types such as joins or aggregates over
ForeignScans in the future.
This also adds the support for postgres_fdw, which is enabled by the
table-level/server-level option "async_capable". The default is false.
Robert Haas, Kyotaro Horiguchi, Thomas Munro, and myself. This commit
is mostly based on the patch proposed by Robert Haas, but also uses
stuff from the patch proposed by Kyotaro Horiguchi and from the patch
proposed by Thomas Munro. Reviewed by Kyotaro Horiguchi, Konstantin
Knizhnik, Andrey Lepikhov, Movead Li, Thomas Munro, Justin Pryzby, and
others.
Discussion: https://postgr.es/m/CA%2BTgmoaXQEt4tZ03FtQhnzeDEMzBck%2BLrni0UWHVVgOTnA6C1w%40mail.gmail.com
Discussion: https://postgr.es/m/CA%2BhUKGLBRyu0rHrDCMC4%3DRn3252gogyp1SjOgG8SEKKZv%3DFwfQ%40mail.gmail.com
Discussion: https://postgr.es/m/20200228.170650.667613673625155850.horikyota.ntt%40gmail.com
Since commit 2ce439f3 we have opened every file in the data directory
and called fsync() at the start of crash recovery. This can be very
slow if there are many files, leading to field complaints of systems
taking minutes or even hours to begin crash recovery.
Provide an alternative method, for Linux only, where we call syncfs() on
every possibly different filesystem under the data directory. This is
equivalent, but avoids faulting in potentially many inodes from
potentially slow storage.
The new mode comes with some caveats, described in the documentation, so
the default value for the new setting is "fsync", preserving the older
behavior.
Reported-by: Michael Brown <michael.brown@discourse.org>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Paul Guo <guopa@vmware.com>
Reviewed-by: Bruce Momjian <bruce@momjian.us>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: David Steele <david@pgmasters.net>
Discussion: https://postgr.es/m/11bc2bb7-ecb5-3ad0-b39f-df632734cd81%40discourse.org
Discussion: https://postgr.es/m/CAEET0ZHGnbXmi8yF3ywsDZvb3m9CbdsGZgfTXscQ6agcbzcZAw%40mail.gmail.com
This commit changes WAL archiver process so that it's treated as
an auxiliary process and can use shared memory. This is an infrastructure
patch required for upcoming shared-memory based stats collector patch
series. These patch series basically need any processes including archiver
that can report the statistics to access to shared memory. Since this patch
itself is useful to simplify the code and when users monitor the status of
archiver, it's committed separately in advance.
This commit simplifies the code for WAL archiving. For example, previously
backends need to signal to archiver via postmaster when they notify
archiver that there are some WAL files to archive. On the other hand,
this commit removes that signal to postmaster and enables backends to
notify archier directly using shared latch.
Also, as the side of this change, the information about archiver process
becomes viewable at pg_stat_activity view.
Author: Kyotaro Horiguchi
Reviewed-by: Andres Freund, Álvaro Herrera, Julien Rouhaud, Tomas Vondra, Arthur Zakirov, Fujii Masao
Discussion: https://postgr.es/m/20180629.173418.190173462.horiguchi.kyotaro@lab.ntt.co.jp
1. Backends waiting for buffer I/O are now interruptible.
2. If something goes wrong in a backend that is currently performing
I/O, waiting backends no longer wake up until that backend reaches
AbortBufferIO() and broadcasts on the CV. Previously, any waiters would
wake up (because the I/O lock was automatically released) and then
busy-loop until AbortBufferIO() cleared BM_IO_IN_PROGRESS.
3. LWLockMinimallyPadded is removed, as it would now be unused.
Author: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (earlier version, 2016)
Discussion: https://postgr.es/m/CA%2BhUKGJ8nBFrjLuCTuqKN0pd2PQOwj9b_jnsiGFFMDvUxahj_A%40mail.gmail.com
Discussion: https://postgr.es/m/CA+Tgmoaj2aPti0yho7FeEf2qt-JgQPRWb0gci_o1Hfr=C56Xng@mail.gmail.com
Traditionally, SIGUSR1 has been overloaded for ad-hoc signals,
procsignal.c signals and latch.c wakeups. Move that last use over to a
new dedicated signal. SIGURG is normally used to report out-of-band
socket data, but PostgreSQL doesn't use that facility.
The signal handler is now installed in all postmaster children by
InitializeLatchSupport(). Those wishing to disconnect from it should
call ShutdownLatchSupport().
Future patches will use this separation of signals to avoid the need for
a signal handler on some operating systems.
Discussion: https://postgr.es/m/CA+hUKGJjxPDpzBE0a3hyUywBvaZuC89yx3jK9RFZgfv_KHU7gg@mail.gmail.com
