Because walsender and normal backends share the same main loop it's
problematic to have two different flag variables, set in signal
handlers, indicating a pending configuration reload. Only certain
walsender commands reach code paths checking for the
variable (START_[LOGICAL_]REPLICATION, CREATE_REPLICATION_SLOT
... LOGICAL, notably not base backups).
This is a bug present since the introduction of walsender, but has
gotten worse in releases since then which allow walsender to do more.
A later patch, not slated for v10, will similarly unify SIGHUP
handling in other types of processes as well.
Author: Petr Jelinek, Andres Freund
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/20170423235941.qosiuoyqprq4nu7v@alap3.anarazel.de
Backpatch: 9.2-, bug is present since 9.0
Some selectivity estimation functions run user-supplied operators over
data obtained from pg_statistic without security checks, which allows
those operators to leak pg_statistic data without having privileges on
the underlying tables. Fix by checking that one of the following is
satisfied: (1) the user has table or column privileges on the table
underlying the pg_statistic data, or (2) the function implementing the
user-supplied operator is leak-proof. If neither is satisfied, planning
will proceed as if there are no statistics available.
At least one of these is satisfied in most cases in practice. The only
situations that are negatively impacted are user-defined or
not-leak-proof operators on a security-barrier view.
Reported-by: Robert Haas <robertmhaas@gmail.com>
Author: Peter Eisentraut <peter_e@gmx.net>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Security: CVE-2017-7484
This extends the castNode() notation introduced by commit 5bcab1114 to
provide, in one step, extraction of a list cell's pointer and coercion to
a concrete node type. For example, "lfirst_node(Foo, lc)" is the same
as "castNode(Foo, lfirst(lc))". Almost half of the uses of castNode
that have appeared so far include a list extraction call, so this is
pretty widely useful, and it saves a few more keystrokes compared to the
old way.
As with the previous patch, back-patch the addition of these macros to
pg_list.h, so that the notation will be available when back-patching.
Patch by me, after an idea of Andrew Gierth's.
Discussion: https://postgr.es/m/14197.1491841216@sss.pgh.pa.us
HandleFunctionRequest() is no longer responsible for reading the protocol
message from the client, since commit 2b3a8b20c2. Fix the outdated
comments.
HandleFunctionRequest() now always returns 0, because the code that used
to return EOF was moved in 2b3a8b20c2. Therefore, the caller no longer
needs to check the return value.
Reported by Andres Freund. Backpatch to all supported versions, even though
this doesn't have any user-visible effect, to make backporting future
patches in this area easier.
Discussion: https://www.postgresql.org/message-id/20170405010525.rt5azbya5fkbhvrx@alap3.anarazel.de
This could result in corruption of the init fork of an unlogged index
if the ambuildempty routine for that index used shared buffers to
create the init fork, which was true for brin, gin, gist, and hash
indexes.
Patch by me, based on an earlier patch by Michael Paquier, who also
reviewed this one. This also incorporates an idea from Artur
Zakirov.
Discussion: http://postgr.es/m/CACYUyc8yccE4xfxhqxfh_Mh38j7dRFuxfaK1p6dSNAEUakxUyQ@mail.gmail.com
The new function allows to cast from one NodeTag based type to
another, while asserting that the conversion is valid. This replaces
the common pattern of doing a cast and a Assert(IsA(ptr, type))
close-by.
As this seems likely to be used pervasively, we decided to backpatch
this change the addition of this macro. Otherwise backpatched fixes
are more likely not to work on back-branches.
On branches before 9.6, where we do not yet rely on inline functions
being available, the type assertion is only performed if PG_USE_INLINE
support is detected. The cast obviously is performed regardless.
For the benefit of verifying the macro compiles in the back-branches,
this commit contains a single use of the new macro. On master, a
somewhat larger conversion will be committed separately.
Author: Peter Eisentraut and Andres Freund
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/c5d387d9-3440-f5e0-f9d4-71d53b9fbe52@2ndquadrant.com
Backpatch: 9.2-
These macros work fine when they are used directly in an "if" test or
similar, but as soon as the return values are assigned to boolean
variables (or passed as boolean arguments to some function), they become
bugs, hopefully caught by compiler warnings. To avoid future problems,
fix the definitions so that they return actual booleans.
To further minimize the risk that somebody uses them in back-patched
fixes that only work correctly in branches starting from the current
master and not in old ones, back-patch the change to supported branches
as appropriate.
See also commit af4472bcb8, and the long
discussion (and larger patch) in the thread mentioned in its commit
message.
Discussion: https://postgr.es/m/18672.1483022414@sss.pgh.pa.us
ExecReScanAgg's check for whether it could re-use a previously calculated
hashtable neglected the possibility that the Agg node might reference
PARAM_EXEC Params that are not referenced by its input plan node. That's
okay if the Params are in upper tlist or qual expressions; but if one
appears in aggregate input expressions, then the hashtable contents need
to be recomputed when the Param's value changes.
To avoid unnecessary performance degradation in the case of a Param that
isn't within an aggregate input, add logic to the planner to determine
which Params are within aggregate inputs. This requires a new field in
struct Agg, but fortunately we never write plans to disk, so this isn't
an initdb-forcing change.
Per report from Jeevan Chalke. This has been broken since forever,
so back-patch to all supported branches.
Andrew Gierth, with minor adjustments by me
Report: <CAM2+6=VY8ykfLT5Q8vb9B6EbeBk-NGuLbT6seaQ+Fq4zXvrDcA@mail.gmail.com>
NUMERIC_MAX_PRECISION is a purely arbitrary constraint on the precision
and scale you can write in a numeric typmod. It might once have had
something to do with the allowed range of a typmod-less numeric value,
but at least since 9.1 we've allowed, and documented that we allowed,
any value that would physically fit in the numeric storage format;
which is something over 100000 decimal digits, not 1000.
Hence, get rid of numeric_in()'s use of NUMERIC_MAX_PRECISION as a limit
on the allowed range of the exponent in scientific-format input. That was
especially silly in view of the fact that you can enter larger numbers as
long as you don't use 'e' to do it. Just constrain the value enough to
avoid localized overflow, and let make_result be the final arbiter of what
is too large. Likewise adjust ecpg's equivalent of this code.
Also get rid of numeric_recv()'s use of NUMERIC_MAX_PRECISION to limit the
number of base-NBASE digits it would accept. That created a dump/restore
hazard for binary COPY without doing anything useful; the wire-format
limit on number of digits (65535) is about as tight as we would want.
In HEAD, also get rid of pg_size_bytes()'s unnecessary intimacy with what
the numeric range limit is. That code doesn't exist in the back branches.
Per gripe from Aravind Kumar. Back-patch to all supported branches,
since they all contain the documentation claim about allowed range of
NUMERIC (cf commit cabf5d84b).
Discussion: <2895.1471195721@sss.pgh.pa.us>
If ANALYZE found no repeated non-null entries in its sample, it set the
column's stadistinct value to -1.0, intending to indicate that the entries
are all distinct. But what this value actually means is that the number
of distinct values is 100% of the table's rowcount, and thus it was
overestimating the number of distinct values by however many nulls there
are. This could lead to very poor selectivity estimates, as for example
in a recent report from Andreas Joseph Krogh. We should discount the
stadistinct value by whatever we've estimated the nulls fraction to be.
(That is what will happen if we choose to use a negative stadistinct for
a column that does have repeated entries, so this code path was just
inconsistent.)
In addition to fixing the stadistinct entries stored by several different
ANALYZE code paths, adjust the logic where get_variable_numdistinct()
forces an "all distinct" estimate on the basis of finding a relevant unique
index. Unique indexes don't reject nulls, so there's no reason to assume
that the null fraction doesn't apply.
Back-patch to all supported branches. Back-patching is a bit of a judgment
call, but this problem seems to affect only a few users (else we'd have
identified it long ago), and it's bad enough when it does happen that
destabilizing plan choices in a worse direction seems unlikely.
Patch by me, with documentation wording suggested by Dean Rasheed
Report: <VisenaEmail.26.df42f82acae38a58.156463942b8@tc7-visena>
Discussion: <16143.1470350371@sss.pgh.pa.us>
Commits 4452000f3 et al established semantics for NullTest.argisrow that
are a bit different from its initial conception: rather than being merely
a cache of whether we've determined the input to have composite type,
the flag now has the further meaning that we should apply field-by-field
testing as per the standard's definition of IS [NOT] NULL. If argisrow
is false and yet the input has composite type, the construct instead has
the semantics of IS [NOT] DISTINCT FROM NULL. Update the comments in
primnodes.h to clarify this, and fix ruleutils.c and deparse.c to print
such cases correctly. In the case of ruleutils.c, this merely results in
cosmetic changes in EXPLAIN output, since the case can't currently arise
in stored rules. However, it represents a live bug for deparse.c, which
would formerly have sent a remote query that had semantics different
from the local behavior. (From the user's standpoint, this means that
testing a remote nested-composite column for null-ness could have had
unexpected recursive behavior much like that fixed in 4452000f3.)
In a related but somewhat independent fix, make plancat.c set argisrow
to false in all NullTest expressions constructed to represent "attnotnull"
constructs. Since attnotnull is actually enforced as a simple null-value
check, this is a more accurate representation of the semantics; we were
previously overpromising what it meant for composite columns, which might
possibly lead to incorrect planner optimizations. (It seems that what the
SQL spec expects a NOT NULL constraint to mean is an IS NOT NULL test, so
arguably we are violating the spec and should fix attnotnull to do the
other thing. If we ever do, this part should get reverted.)
Back-patch, same as the previous commit.
Discussion: <10682.1469566308@sss.pgh.pa.us>
GiST index build could go into an infinite loop when presented with boxes
(or points, circles or polygons) containing NaN component values. This
happened essentially because the code assumed that x == x is true for any
"double" value x; but it's not true for NaNs. The looping behavior was not
the only problem though: we also attempted to sort the items using simple
double comparisons. Since NaNs violate the trichotomy law, qsort could
(in principle at least) get arbitrarily confused and mess up the sorting of
ordinary values as well as NaNs. And we based splitting choices on box size
calculations that could produce NaNs, again resulting in undesirable
behavior.
To fix, replace all comparisons of doubles in this logic with
float8_cmp_internal, which is NaN-aware and is careful to sort NaNs
consistently, higher than any non-NaN. Also rearrange the box size
calculation to not produce NaNs; instead it should produce an infinity
for a box with NaN on one side and not-NaN on the other.
I don't by any means claim that this solves all problems with NaNs in
geometric values, but it should at least make GiST index insertion work
reliably with such data. It's likely that the index search side of things
still needs some work, and probably regular geometric operations too.
But with this patch we're laying down a convention for how such cases
ought to behave.
Per bug #14238 from Guang-Dih Lei. Back-patch to 9.2; the code used before
commit 7f3bd86843 is quite different and doesn't lock up on my simple
test case, nor on the submitter's dataset.
Report: <20160708151747.1426.60150@wrigleys.postgresql.org>
Discussion: <28685.1468246504@sss.pgh.pa.us>
Document these as "nearest integer >= argument" and "nearest integer <=
argument", which will hopefully be less confusing than the old formulation.
New wording is from Matlab via Dean Rasheed.
I changed the pg_description entries as well as the SGML docs. In the
back branches, this will only affect installations initdb'd in the future,
but it should be harmless otherwise.
Discussion: <CAEZATCW3yzJo-NMSiQs5jXNFbTsCEftZS-Og8=FvFdiU+kYuSA@mail.gmail.com>
If we ANALYZE only selected columns of a table, we should not postpone
auto-analyze because of that; other columns may well still need stats
updates. As committed, the counter is left alone if a column list is
given, whether or not it includes all analyzable columns of the table.
Per complaint from Tomasz Ostrowski.
It's been like this a long time, so back-patch to all supported branches.
Report: <ef99c1bd-ff60-5f32-2733-c7b504eb960c@ato.waw.pl>
do_text_output_multiline() would fail (typically with a null pointer
dereference crash) if its input string did not end with a newline. Such
cases do not arise in our current sources; but it certainly could happen
in future, or in extension code's usage of the function, so we should fix
it. To fix, replace "eol += len" with "eol = text + len".
While at it, make two cosmetic improvements: mark the input string const,
and rename the argument from "text" to "txt" to dodge pgindent strangeness
(since "text" is a typedef name).
Even though this problem is only latent at present, it seems like a good
idea to back-patch the fix, since it's a very simple/safe patch and it's
not out of the realm of possibility that we might in future back-patch
something that expects sane behavior from do_text_output_multiline().
Per report from Hao Lee.
Report: <CAGoxFiFPAGyPAJLcFxTB5cGhTW2yOVBDYeqDugYwV4dEd1L_Ag@mail.gmail.com>
Given a three-or-more-way equivalence class, such as X.Y = Y.Y = Z.Z,
it was possible for the planner to omit one of the quals needed to
enforce that all members of the equivalence class are actually equal.
This only happened in the case of a parameterized join node for two
of the relations, that is a plan tree like
Nested Loop
-> Scan X
-> Nested Loop
-> Scan Y
-> Scan Z
Filter: Z.Z = X.X
The eclass machinery normally expects to apply X.X = Y.Y when those
two relations are joined, but in this shape of plan tree they aren't
joined until the top node --- and, if the lower nested loop is marked
as parameterized by X, the top node will assume that the relevant eclass
condition(s) got pushed down into the lower node. On the other hand,
the scan of Z assumes that it's only responsible for constraining Z.Z
to match any one of the other eclass members. So one or another of
the required quals sometimes fell between the cracks, depending on
whether consideration of the eclass in get_joinrel_parampathinfo()
for the lower nested loop chanced to generate X.X = Y.Y or X.X = Z.Z
as the appropriate constraint there. If it generated the latter,
it'd erroneously suppose that the Z scan would take care of matters.
To fix, force X.X = Y.Y to be generated and applied at that join node
when this case occurs.
This is *extremely* hard to hit in practice, because various planner
behaviors conspire to mask the problem; starting with the fact that the
planner doesn't really like to generate a parameterized plan of the
above shape. (It might have been impossible to hit it before we
tweaked things to allow this plan shape for star-schema cases.) Many
thanks to Alexander Kirkouski for submitting a reproducible test case.
The bug can be demonstrated in all branches back to 9.2 where parameterized
paths were introduced, so back-patch that far.
Commit 23a41573c attempted to fix the DatumGetBool macro to ignore bits
in a Datum that are to the left of the actual bool value. But it did that
by casting the Datum to bool; and on compilers that use C99 semantics for
bool, that ends up being a whole-word test, not a 1-byte test. This seems
to be the true explanation for contrib/seg failing in VS2015. To fix, use
GET_1_BYTE() explicitly. I think in the previous patch, I'd had some idea
of not having to commit to bool being exactly 1 byte wide, but regardless
of what the compiler's bool is, boolean columns and Datums are certainly
1 byte wide.
The previous fix was (eventually) back-patched into all active versions,
so do likewise with this one.
The coverage was rather lean for cases that bind() or listen() might
return. Add entries for everything that there's a direct equivalent
for in the set of Unix errnos that elog.c has heard of.
There's no longer a need for the MSVC-version-specific code stanza that
forcibly redefines errno code symbols, because since commit 73838b52 we're
unconditionally redefining them in the stanza before this one anyway.
Now it's merely confusing and ugly, so get rid of it; and improve the
comment that explains what's going on here.
Although this is just cosmetic, back-patch anyway since I'm intending
to back-patch some less-cosmetic changes in this same hunk of code.
Fix Windows builds to report something useful rather than "could not bind
IPv4 socket: No error" when bind() fails.
Back-patch of commits d1b7d4877b and 22989a8e34.
Discussion: <4065.1452450340@sss.pgh.pa.us>
Per discussion, there doesn't seem to be much value in having
NUM_SPINLOCK_SEMAPHORES set to 1024: under any scenario where you are
running more than a few backends concurrently, you really had better have a
real spinlock implementation if you want tolerable performance. And 1024
semaphores is a sizable fraction of the system-wide SysV semaphore limit
on many platforms. Therefore, reduce this setting's default value to 128
to make it less likely to cause out-of-semaphores problems.
My back-patch of the 9.4-era commit 44cd47c1d4 into 9.2 and 9.3 fixed
HPPA builds as expected, but it broke --disable-spinlocks builds, because
the dummy spinlock is initialized before the underlying semaphore
infrastructure is alive. In 9.4 and up this works because of commit
daa7527afc, which decoupled initialization of an slock_t variable
from access to the actual system semaphore object. The best solution
seems to be to back-port that patch, which should be a net win anyway
because it improves the usability of --disable-spinlocks builds in the
older branches; and it's been out long enough now to not be worrisome
from a stability perspective.
We weren't particularly maintaining barrier.h before 9.4, because nothing
was using it in those branches. Well, nothing until commit 37de8de9e got
back-patched. That broke 9.2 and 9.3 for some non-mainstream platforms
that we haven't been testing in the buildfarm, including icc on ia64,
HPPA, and Alpha.
This commit effectively back-patches commits e5592c61a, 89779bf2c,
and 747ca6697, though I did it just by copying the file (less copyright
date updates) rather than by cherry-picking those commits.
Per an attempt to run gaur and pademelon over old branches they've
not been run on since ~2013.
Returning the direct result of bit arithmetic, in a macro intended to be
used in a boolean manner, can be problematic if the return value is
stored in a variable of type 'bool'. If bool is implemented using C99's
_Bool, that can lead to comparison failures if the variable is then
compared again with the expression (see ginStepRight() for an example
that fails), as _Bool forces the result to be 0/1. That happens in some
configurations of newer MSVC compilers. It's also problematic when
storing the result of such an expression in a narrower type.
Several gin macros have been declared in that style since gin's initial
commit in 8a3631f8d8.
There's a lot more macros like this, but this is the only one causing
regression test failures; and I don't want to commit and backpatch a
larger patch with lots of conflicts just before the next set of minor
releases.
Discussion: 20150811154237.GD17575@awork2.anarazel.de
Backpatch: All supported branches
Previously, we included <xlocale.h> only if necessary to get the definition
of type locale_t. According to notes in PGAC_TYPE_LOCALE_T, this is
important because on some versions of glibc that file supplies an
incompatible declaration of locale_t. (This info may be obsolete, because
on my RHEL6 box that seems to be the *only* definition of locale_t; but
there may still be glibc's in the wild for which it's a live concern.)
It turns out though that on FreeBSD and maybe other BSDen, you can get
locale_t from stdlib.h or locale.h but mbstowcs_l() and friends only from
<xlocale.h>. This was leaving us compiling calls to mbstowcs_l() and
friends with no visible prototype, which causes a warning and could
possibly cause actual trouble, since it's not declared to return int.
Hence, adjust the configure checks so that we'll include <xlocale.h>
either if it's necessary to get type locale_t or if it's necessary to
get a declaration of mbstowcs_l().
Report and patch by Aleksander Alekseev, somewhat whacked around by me.
Back-patch to all supported branches, since we have been using
mbstowcs_l() since 9.1.
Renaming a file using rename(2) is not guaranteed to be durable in face
of crashes; especially on filesystems like xfs and ext4 when mounted
with data=writeback. To be certain that a rename() atomically replaces
the previous file contents in the face of crashes and different
filesystems, one has to fsync the old filename, rename the file, fsync
the new filename, fsync the containing directory. This sequence is not
generally adhered to currently; which exposes us to data loss risks. To
avoid having to repeat this arduous sequence, introduce
durable_rename(), which wraps all that.
Also add durable_link_or_rename(). Several places use link() (with a
fallback to rename()) to rename a file, trying to avoid replacing the
target file out of paranoia. Some of those rename sequences need to be
durable as well. There seems little reason extend several copies of the
same logic, so centralize the link() callers.
This commit does not yet make use of the new functions; they're used in
a followup commit.
Author: Michael Paquier, Andres Freund
Discussion: 56583BDD.9060302@2ndquadrant.com
Backpatch: All supported branches
Reportedly, some compilers warn about tests like "c < 0" if c is unsigned,
and hence complain about the character range checks I added in commit
3bb3f42f37. This is a bit of a pain since
the regex library doesn't really want to assume that chr is unsigned.
However, since any such reconfiguration would involve manual edits of
regcustom.h anyway, we can put it on the shoulders of whoever wants to
do that to adjust this new range-checking macro correctly.
Per gripes from Coverity and Andres.
Previously, our regex code defined CHR_MAX as 0xfffffffe, which is a
bad choice because it is outside the range of type "celt" (int32).
Characters approaching that limit could lead to infinite loops in logic
such as "for (c = a; c <= b; c++)" where c is of type celt but the
range bounds are chr. Such loops will work safely only if CHR_MAX+1
is representable in celt, since c must advance to beyond b before the
loop will exit.
Fortunately, there seems no reason not to restrict CHR_MAX to 0x7ffffffe.
It's highly unlikely that Unicode will ever assign codes that high, and
none of our other backend encodings need characters beyond that either.
In addition to modifying the macro, we have to explicitly enforce character
range restrictions on the values of \u, \U, and \x escape sequences, else
the limit is trivially bypassed.
Also, the code for expanding case-independent character ranges in bracket
expressions had a potential integer overflow in its calculation of the
number of characters it could generate, which could lead to allocating too
small a character vector and then overwriting memory. An attacker with the
ability to supply arbitrary regex patterns could easily cause transient DOS
via server crashes, and the possibility for privilege escalation has not
been ruled out.
Quite aside from the integer-overflow problem, the range expansion code was
unnecessarily inefficient in that it always produced a result consisting of
individual characters, abandoning the knowledge that we had a range to
start with. If the input range is large, this requires excessive memory.
Change it so that the original range is reported as-is, and then we add on
any case-equivalent characters that are outside that range. With this
approach, we can bound the number of individual characters allowed without
sacrificing much. This patch allows at most 100000 individual characters,
which I believe to be more than the number of case pairs existing in
Unicode, so that the restriction will never be hit in practice.
It's still possible for range() to take awhile given a large character code
range, so also add statement-cancel detection to its loop. The downstream
function dovec() also lacked cancel detection, and could take a long time
given a large output from range().
Per fuzz testing by Greg Stark. Back-patch to all supported branches.
Security: CVE-2016-0773
A scan for missed proisstrict markings in the core code turned up
these functions:
brin_summarize_new_values
pg_stat_reset_single_table_counters
pg_stat_reset_single_function_counters
pg_create_logical_replication_slot
pg_create_physical_replication_slot
pg_drop_replication_slot
The first three of these take OID, so a null argument will normally look
like a zero to them, resulting in "ERROR: could not open relation with OID
0" for brin_summarize_new_values, and no action for the pg_stat_reset_XXX
functions. The other three will dump core on a null argument, though this
is mitigated by the fact that they won't do so until after checking that
the caller is superuser or has rolreplication privilege.
In addition, the pg_logical_slot_get/peek[_binary]_changes family was
intentionally marked nonstrict, but failed to make nullness checks on all
the arguments; so again a null-pointer-dereference crash is possible but
only for superusers and rolreplication users.
Add the missing ARGISNULL checks to the latter functions, and mark the
former functions as strict in pg_proc. Make that change in the back
branches too, even though we can't force initdb there, just so that
installations initdb'd in future won't have the issue. Since none of these
bugs rise to the level of security issues (and indeed the pg_stat_reset_XXX
functions hardly misbehave at all), it seems sufficient to do this.
In addition, fix some order-of-operations oddities in the slot_get_changes
family, mostly cosmetic, but not the part that moves the function's last
few operations into the PG_TRY block. As it stood, there was significant
risk for an error to exit without clearing historical information from
the system caches.
The slot_get_changes bugs go back to 9.4 where that code was introduced.
Back-patch appropriate subsets of the pg_proc changes into all active
branches, as well.
This is necessary so that REASSIGN OWNED does the right thing with
composite types, to wit, that it also alters ownership of the type's
pg_class entry -- previously, the pg_class entry remained owned by the
original user, which caused later other failures such as the new owner's
inability to use ALTER TYPE to rename an attribute of the affected
composite. Also, if the original owner is later dropped, the pg_class
entry becomes owned by a non-existant user which is bogus.
To fix, create a new routine AlterTypeOwner_oid which knows whether to
pass the request to ATExecChangeOwner or deal with it directly, and use
that in shdepReassignOwner rather than calling AlterTypeOwnerInternal
directly. AlterTypeOwnerInternal is now simpler in that it only
modifies the pg_type entry and recurses to handle a possible array type;
higher-level tasks are handled by either AlterTypeOwner directly or
AlterTypeOwner_oid.
I took the opportunity to add a few more objects to the test rig for
REASSIGN OWNED, so that more cases are exercised. Additional ones could
be added for superuser-only-ownable objects (such as FDWs and event
triggers) but I didn't want to push my luck by adding a new superuser to
the tests on a backpatchable bug fix.
Per bug #13666 reported by Chris Pacejo.
This is a backpatch of commit 756e7b4c9d to branches 9.1 -- 9.4.
It emerges that libreadline doesn't notice terminal window size change
events unless they occur while collecting input. This is easy to stumble
over if you resize the window while using a pager to look at query output,
but it can be demonstrated without any pager involvement. The symptom is
that queries exceeding one line are misdisplayed during subsequent input
cycles, because libreadline has the wrong idea of the screen dimensions.
The safest, simplest way to fix this is to call rl_reset_screen_size()
just before calling readline(). That causes an extra ioctl(TIOCGWINSZ)
for every command; but since it only happens when reading from a tty, the
performance impact should be negligible. A more valid objection is that
this still leaves a tiny window during entry to readline() wherein delivery
of SIGWINCH will be missed; but the practical consequences of that are
probably negligible. In any case, there doesn't seem to be any good way to
avoid the race, since readline exposes no functions that seem safe to call
from a generic signal handler --- rl_reset_screen_size() certainly isn't.
It turns out that we also need an explicit rl_initialize() call, else
rl_reset_screen_size() dumps core when called before the first readline()
call.
rl_reset_screen_size() is not present in old versions of libreadline,
so we need a configure test for that. (rl_initialize() is present at
least back to readline 4.0, so we won't bother with a test for it.)
We would need a configure test anyway since libedit's emulation of
libreadline doesn't currently include such a function. Fortunately,
libedit seems not to have any corresponding bug.
Merlin Moncure, adjusted a bit by me
At the end of crash recovery, unlogged relations are reset to the empty
state, using their init fork as the template. The init fork is copied to
the main fork without going through shared buffers. Unfortunately WAL
replay so far has not necessarily flushed writes from shared buffers to
disk at that point. In normal crash recovery, and before the
introduction of 'fast promotions' in fd4ced523 / 9.3, the
END_OF_RECOVERY checkpoint flushes the buffers out in time. But with
fast promotions that's not the case anymore.
To fix, force WAL writes targeting the init fork to be flushed
immediately (using the new FlushOneBuffer() function). In 9.5+ that
flush can centrally be triggered from the code dealing with restoring
full page writes (XLogReadBufferForRedoExtended), in earlier releases
that responsibility is in the hands of XLOG_HEAP_NEWPAGE's replay
function.
Backpatch to 9.1, even if this currently is only known to trigger in
9.3+. Flushing earlier is more robust, and it is advantageous to keep
the branches similar.
Typical symptoms of this bug are errors like
'ERROR: index "..." contains unexpected zero page at block 0'
shortly after promoting a node.
Reported-By: Thom Brown
Author: Andres Freund and Michael Paquier
Discussion: 20150326175024.GJ451@alap3.anarazel.de
Backpatch: 9.1-
The POSIX standard for tar headers requires archive member sizes to be
printed in octal with at most 11 digits, limiting the representable file
size to 8GB. However, GNU tar and apparently most other modern tars
support a convention in which oversized values can be stored in base-256,
allowing any practical file to be a tar member. Adopt this convention
to remove two limitations:
* pg_dump with -Ft output format failed if the contents of any one table
exceeded 8GB.
* pg_basebackup failed if the data directory contained any file exceeding
8GB. (This would be a fatal problem for installations configured with a
table segment size of 8GB or more, and it has also been seen to fail when
large core dump files exist in the data directory.)
File sizes under 8GB are still printed in octal, so that no compatibility
issues are created except in cases that would have failed entirely before.
In addition, this patch fixes several bugs in the same area:
* In 9.3 and later, we'd defined tarCreateHeader's file-size argument as
size_t, which meant that on 32-bit machines it would write a corrupt tar
header for file sizes between 4GB and 8GB, even though no error was raised.
This broke both "pg_dump -Ft" and pg_basebackup for such cases.
* pg_restore from a tar archive would fail on tables of size between 4GB
and 8GB, on machines where either "size_t" or "unsigned long" is 32 bits.
This happened even with an archive file not affected by the previous bug.
* pg_basebackup would fail if there were files of size between 4GB and 8GB,
even on 64-bit machines.
* In 9.3 and later, "pg_basebackup -Ft" failed entirely, for any file size,
on 64-bit big-endian machines.
In view of these potential data-loss bugs, back-patch to all supported
branches, even though removal of the documented 8GB limit might otherwise
be considered a new feature rather than a bug fix.
This code previously counted the number of NFA states it created, and
complained if a limit was exceeded, so as to prevent bizarre regex patterns
from consuming unreasonable time or memory. That's fine as far as it went,
but the code paid no attention to how many arcs linked those states. Since
regexes can be contrived that have O(N) states but will need O(N^2) arcs
after fixempties() processing, it was still possible to blow out memory,
and take a long time doing it too. To fix, modify the bookkeeping to count
space used by both states and arcs.
I did not bother with including the "color map" in the accounting; it
can only grow to a few megabytes, which is not a lot in comparison to
what we're allowing for states+arcs (about 150MB on 64-bit machines
or half that on 32-bit machines).
Looking at some of the larger real-world regexes captured in the Tcl
regression test suite suggests that the most that is likely to be needed
for regexes found in the wild is under 10MB, so I believe that the current
limit has enough headroom to make it okay to keep it as a hard-wired limit.
In connection with this, redefine REG_ETOOBIG as meaning "regular
expression is too complex"; the previous wording of "nfa has too many
states" was already somewhat inapropos because of the error code's use
for stack depth overrun, and it was not very user-friendly either.
Back-patch to all supported branches.
Change the singly-linked in-arc and out-arc lists to be doubly-linked,
so that arc deletion is constant time rather than having worst-case time
proportional to the number of other arcs on the connected states.
Modify the bulk arc transfer operations copyins(), copyouts(), moveins(),
moveouts() so that they use a sort-and-merge algorithm whenever there's
more than a small number of arcs to be copied or moved. The previous
method is O(N^2) in the number of arcs involved, because it performs
duplicate checking independently for each copied arc. The new method may
change the ordering of existing arcs for the destination state, but nothing
really cares about that.
Provide another bulk arc copying method mergeins(), which is unused as
of this commit but is needed for the next one. It basically is like
copyins(), but the source arcs might not all come from the same state.
Replace the O(N^2) bubble-sort algorithm used in carcsort() with a qsort()
call.
These changes greatly improve the performance of regex compilation for
large or complex regexes, at the cost of extra space for arc storage during
compilation. The original tradeoff was probably fine when it was made, but
now we care more about speed and less about memory consumption.
Back-patch to all supported branches.
Postmaster child processes that aren't supposed to be attached to shared
memory were not bothering to close the shared memory mapping handle they
inherit from the postmaster process. That's mostly harmless, since the
handle vanishes anyway when the child process exits -- but the syslogger
process, if used, doesn't get killed and restarted during recovery from a
backend crash. That meant that Windows doesn't see the shared memory
mapping as becoming free, so it doesn't delete it and the postmaster is
unable to create a new one, resulting in failure to recover from crashes
whenever logging_collector is turned on.
Per report from Dmitry Vasilyev. It's a bit astonishing that we'd not
figured this out long ago, since it's been broken from the very beginnings
of out native Windows support; probably some previously-unexplained trouble
reports trace to this.
A secondary problem is that on Cygwin (perhaps only in older versions?),
exec() may not detach from the shared memory segment after all, in which
case these child processes did remain attached to shared memory, posing
the risk of an unexpected shared memory clobber if they went off the rails
somehow. That may be a long-gone bug, but we can deal with it now if it's
still live, by detaching within the infrastructure introduced here to deal
with closing the handle.
Back-patch to all supported branches.
Tom Lane and Amit Kapila
The postmaster now checks every minute or so (worst case, at most two
minutes) that postmaster.pid is still there and still contains its own PID.
If not, it performs an immediate shutdown, as though it had received
SIGQUIT.
The original goal behind this change was to ensure that failed buildfarm
runs would get fully cleaned up, even if the test scripts had left a
postmaster running, which is not an infrequent occurrence. When the
buildfarm script removes a test postmaster's $PGDATA directory, its next
check on postmaster.pid will fail and cause it to exit. Previously, manual
intervention was often needed to get rid of such orphaned postmasters,
since they'd block new test postmasters from obtaining the expected socket
address.
However, by checking postmaster.pid and not something else, we can provide
additional robustness: manual removal of postmaster.pid is a frequent DBA
mistake, and now we can at least limit the damage that will ensue if a new
postmaster is started while the old one is still alive.
Back-patch to all supported branches, since we won't get the desired
improvement in buildfarm reliability otherwise.
