There's a project policy against using plain "char buf[BLCKSZ]" local
or static variables as page buffers; preferred style is to palloc or
malloc each buffer to ensure it is MAXALIGN'd. However, that policy's
been ignored in an increasing number of places. We've apparently got
away with it so far, probably because (a) relatively few people use
platforms on which misalignment causes core dumps and/or (b) the
variables chance to be sufficiently aligned anyway. But this is not
something to rely on. Moreover, even if we don't get a core dump,
we might be paying a lot of cycles for misaligned accesses.
To fix, invent new union types PGAlignedBlock and PGAlignedXLogBlock
that the compiler must allocate with sufficient alignment, and use
those in place of plain char arrays.
I used these types even for variables where there's no risk of a
misaligned access, since ensuring proper alignment should make
kernel data transfers faster. I also changed some places where
we had been palloc'ing short-lived buffers, for coding style
uniformity and to save palloc/pfree overhead.
Since this seems to be a live portability hazard (despite the lack
of field reports), back-patch to all supported versions.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1535618100.1286.3.camel@credativ.de
This function had a blacklist of dump object types that it believed
needed exclusive lock ... but we hadn't maintained that, so that it
was missing ROW SECURITY, POLICY, and INDEX ATTACH items, all of
which need (or should be treated as needing) exclusive lock.
Since the same oversight seems likely in future, let's reverse the
sense of the test so that the code has a whitelist of safe object
types; better to wrongly assume a command can't be run in parallel
than the opposite. Currently the only POST_DATA object type that's
safe is CREATE INDEX ... and that list hasn't changed in a long time.
Back-patch to 9.5 where RLS came in.
Discussion: https://postgr.es/m/11450.1535483506@sss.pgh.pa.us
The archive should show a dependency on the item's table, but it failed
to include one. This could cause failures in parallel restore due to
emitting ALTER TABLE ... ENABLE ROW LEVEL SECURITY before restoring
the table's data. In practice the odds of a problem seem low, since
you would typically need to have set FORCE ROW LEVEL SECURITY as well,
and you'd also need a very high --jobs count to have any chance of this
happening. That probably explains the lack of field reports.
Still, it's a bug, so back-patch to 9.5 where RLS was introduced.
Discussion: https://postgr.es/m/19784.1535390902@sss.pgh.pa.us
Commits c6b3c939b (which fixed the precedence of >=, <=, <> operators)
and 865f14a2d (which added support for the standard => notation for
named arguments) created a class of lexer tokens which look like
multi-character operators but which have their own token IDs distinct
from Op. However, longest-match rules meant that following any of
these tokens with another operator character, as in (1<>-1), would
cause them to be incorrectly returned as Op.
The error here isn't immediately obvious, because the parser would
usually still find the correct operator via the Op token, but there
were more subtle problems:
1. If immediately followed by a comment or +-, >= <= <> would be given
the old precedence of Op rather than the correct new precedence;
2. If followed by a comment, != would be returned as Op rather than as
NOT_EQUAL, causing it not to be found at all;
3. If followed by a comment or +-, the => token for named arguments
would be lexed as Op, causing the argument to be mis-parsed as a
simple expression, usually causing an error.
Fix by explicitly checking for the operators in the {operator} code
block in addition to all the existing special cases there.
Backpatch to 9.5 where the problem was introduced.
Analysis and patch by me; review by Tom Lane.
Discussion: https://postgr.es/m/87va851ppl.fsf@news-spur.riddles.org.uk
The lexer's handling of operators contained an O(N^3) hazard when
dealing with long strings of + or - characters; it seems hard to
prevent this case from being O(N^2), but the additional N multiplier
was not needed.
Backpatch all the way since this has been there since 7.x, and it
presents at least a mild hazard in that trying to do Bind, PREPARE or
EXPLAIN on a hostile query could take excessive time (without
honouring cancels or timeouts) even if the query was never executed.
While monitoring the code, a couple of issues related to string
translation has showed up:
- Some routines for auto-updatable views return an error string, which
sometimes missed the shot. A comment regarding string translation is
added for each routine to help with future features.
- GSSAPI authentication missed two translations.
- vacuumdb handles non-translated strings.
Reported-by: Kyotaro Horiguchi
Author: Kyotaro Horiguchi
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20180810.152131.31921918.horiguchi.kyotaro@lab.ntt.co.jp
Backpatch-through: 9.3
Previously, this code blindly followed the common coding pattern of
passing PQserverVersion(AH->connection) as the server-version parameter
of fmtQualifiedId. That works as long as we have a connection; but in
pg_restore with text output, we don't. Instead we got a zero from
PQserverVersion, which fmtQualifiedId interpreted as "server is too old to
have schemas", and so the name went unqualified. That still accidentally
managed to work in many cases, which is probably why this ancient bug went
undetected for so long. It only became obvious in the wake of the changes
to force dump/restore to execute with restricted search_path.
In HEAD/v11, let's deal with this by ripping out fmtQualifiedId's server-
version behavioral dependency, and just making it schema-qualify all the
time. We no longer support pg_dump from servers old enough to need the
ability to omit schema name, let alone restoring to them. (Also, the few
callers outside pg_dump already didn't work with pre-schema servers.)
In older branches, that's not an acceptable solution, so instead just
tweak the DISABLE/ENABLE TRIGGER logic to ensure it will schema-qualify
its output regardless of server version.
Per bug #15338 from Oleg somebody. Back-patch to all supported branches.
Discussion: https://postgr.es/m/153452458706.1316.5328079417086507743@wrigleys.postgresql.org
Commit 244142d32a only tested for the
pg_controldata output for primary servers, but standby servers have
different "Database cluster state" output, so check for that too.
Diagnosed-by: Michael Paquier
Discussion: https://postgr.es/m/20180810164240.GM13638@paquier.xyz
Backpatch-through: 9.3
pg_dump with --binary-upgrade must emit ALTER EXTENSION ADD commands
for all objects that are members of extensions. It forgot to do so for
event triggers, as per bug #15310 from Nick Barnes. Back-patch to 9.3
where event triggers were introduced.
Haribabu Kommi
Discussion: https://postgr.es/m/153360083872.1395.4593932457718151600@wrigleys.postgresql.org
The original coding here (which is, I believe, my fault) supposed that
it didn't need to concern itself with the possibility that one object
of a given type-priority has a namespace while another doesn't. But
that's not reliably true anymore, if it ever was; and if it does happen
then it's possible that DOTypeNameCompare returns self-inconsistent
comparison results. That leads to unspecified behavior in qsort()
and a resultant weird output order from pg_dump.
This should end up being only a cosmetic problem, because any ordering
constraints that actually matter should be enforced by the later
dependency-based sort. Still, it's a bug, so back-patch.
Report and fix by Jacob Champion, though I editorialized on his
patch to the extent of making NULL sort after non-NULL, for consistency
with our usual sorting definitions.
Discussion: https://postgr.es/m/CABAq_6Hw+V-Kj7PNfD5tgOaWT_-qaYkc+SRmJkPLeUjYXLdxwQ@mail.gmail.com
6cb3372 enforces errno to ENOSPC when less bytes than what is expected
have been written when it is unset, though it forgot to properly reset
errno before doing a system call to write(), causing errno to
potentially come from a previous system call.
Reported-by: Tom Lane
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/31797.1533326676@sss.pgh.pa.us
Commits 742869946 et al turn out to be a couple bricks shy of a load.
We were dumping the stored values of GUC_LIST_QUOTE variables as they
appear in proconfig or setconfig catalog columns. However, although that
quoting rule looks a lot like SQL-identifier double quotes, there are two
critical differences: empty strings ("") are legal, and depending on which
variable you're considering, values longer than NAMEDATALEN might be valid
too. So the current technique fails altogether on empty-string list
entries (as reported by Steven Winfield in bug #15248) and it also risks
truncating file pathnames during dump/reload of GUC values that are lists
of pathnames.
To fix, split the stored value without any downcasing or truncation,
and then emit each element as a SQL string literal.
This is a tad annoying, because we now have three copies of the
comma-separated-string splitting logic in varlena.c as well as a fourth
one in dumputils.c. (Not to mention the randomly-different-from-those
splitting logic in libpq...) I looked at unifying these, but it would
be rather a mess unless we're willing to tweak the API definitions of
SplitIdentifierString, SplitDirectoriesString, or both. That might be
worth doing in future; but it seems pretty unsafe for a back-patched
bug fix, so for now accept the duplication.
Back-patch to all supported branches, as the previous fix was.
Discussion: https://postgr.es/m/7585.1529435872@sss.pgh.pa.us
pg_dump knew about printing ALTER TABLE ... REPLICA IDENTITY USING INDEX
for indexes declared as indexes, but it failed to print that for indexes
declared as unique or primary-key constraints. Per report from Achilleas
Mantzios.
This has been broken since the feature was introduced, AFAICS.
Back-patch to 9.4.
Discussion: https://postgr.es/m/1e6cc5ad-b84a-7c07-8c08-a4d0c3cdc938@matrix.gatewaynet.com
Previously pg_upgrade checked for the pid file and started/stopped the
server to force a clean shutdown. However, "pg_ctl -m immediate"
removes the pid file but doesn't do a clean shutdown, so check
pg_controldata for a clean shutdown too.
Diagnosed-by: Vimalraj A
Discussion: https://postgr.es/m/CAFKBAK5e4Q-oTUuPPJ56EU_d2Rzodq6GWKS3ncAk3xo7hAsOZg@mail.gmail.com
Backpatch-through: 9.3
I blew the dust off a Bourne shell (file date 1996, yea verily) and
tried to run test.sh with it. It mostly worked, but I found that the
temp-directory creation code introduced by commit be76a6d39 was not
compatible, for a couple of reasons: this shell thinks "set -e" should
force an exit if a command within backticks fails, and it also thinks code
within braces should be executed by a sub-shell, meaning that variable
settings don't propagate back up to the parent shell. In view of Victor
Wagner's report that Solaris is still using pre-POSIX shells, seems like
we oughta make this case work. It's not like the code is any less
idiomatic this way; the prior coding technique appeared nowhere else.
(There is a remaining bash-ism here, which is that $RANDOM doesn't do
what the code hopes in non-bash shells. But the use of $$ elsewhere in
that path should be enough to ensure uniqueness and some amount of
randomness, so I think it's okay as-is.)
Back-patch to all supported branches, as the previous commit was.
Discussion: https://postgr.es/m/20180720153820.69e9ae6c@fafnir.local.vm
A collection of typos I happened to spot while reading code, as well as
grepping for common mistakes.
Backpatch to all supported versions, as applicable, to avoid conflicts
when backporting other commits in the future.
Back-patch commit dddfc4cb2, which broke LDFLAGS and related Makefile
variables into two parts, one for within-build-tree library references and
one for external libraries, to ensure that the order of -L flags has all
of the former before all of the latter. This turns out to fix a problem
recently noted on buildfarm member peripatus, that we attempted to
incorporate code from libpgport.a into a shared library. That will fail on
platforms that are sticky about putting non-PIC code into shared libraries.
(It's quite surprising we hadn't seen such failures before, since the code
in question has been like that for a long time.)
I think that peripatus' problem could have been fixed with just a subset
of this patch; but since the previous issue of accidentally linking to the
wrong copy of a Postgres shlib seems likely to bite people in the field,
let's just back-patch the whole change. Now that commit dddfc4cb2 has
survived some beta testing, I'm less afraid to back-patch it than I was
at the time.
This also fixes undesired inclusion of "-DFRONTEND" in pg_config's CPPFLAGS
output (in 9.6 and up) and undesired inclusion of "-L../../src/common" in
its LDFLAGS output (in all supported branches).
Back-patch to v10 and older branches; this is already in v11.
Discussion: https://postgr.es/m/20180704234304.bq2dxispefl65odz@ler-imac.local
System calls mixed up in error code paths are causing two issues which
several code paths have not correctly handled:
1) For write() calls, sometimes the system may return less bytes than
what has been written without errno being set. Some paths were careful
enough to consider that case, and assumed that errno should be set to
ENOSPC, other calls missed that.
2) errno generated by a system call is overwritten by other system calls
which may succeed once an error code path is taken, causing what is
reported to the user to be incorrect.
This patch uses the brute-force approach of correcting all those code
paths. Some refactoring could happen in the future, but this is let as
future work, which is not targeted for back-branches anyway.
Author: Michael Paquier
Reviewed-by: Ashutosh Sharma
Discussion: https://postgr.es/m/20180622061535.GD5215@paquier.xyz
This could only cause an issue if strftime returned a ridiculously
long timezone name, which seems unlikely; and it wouldn't qualify
as a security problem even then, since pg_waldump (nee pg_xlogdump)
is a debug tool not part of the server. But gcc 8 has started issuing
warnings about it, so let's use snprintf and be safe.
Backpatch to 9.3 where this code was added.
Discussion: https://postgr.es/m/21789.1529170195@sss.pgh.pa.us
The regexes used in 102_vacuumdb_stages.pl to check the postmaster log
for expected output contained several places with ".*.*", which is
underdetermined and can cause exponential runtime growth in Perl's regex
matcher (since it's not bright enough not to waste time seeing whether
different splits of the same substring would allow a match). We were
fortunate that the amount of text in the postmaster log was generally not
enough to make the runtime go to the moon; although commit 6271fceb8 had
been on the hairy edge of an obvious problem, thanks to its increasing the
default log verbosity to DEBUG1. Experimentation shows that anyone who
tried to run this test case with an even higher log verbosity would have
been in for serious pain. But even at default logging level, fixing this
saves several hundred ms on my workstation, more on slower buildfarm
members.
Remove the extra ".*"s, restoring more-or-less-linear matching speed.
Back-patch to 9.4 where the test case was added, mostly in case anyone
tries to do related debugging in a back branch.
Discussion: https://postgr.es/m/32459.1525657786@sss.pgh.pa.us
Msys2's uname -s outputs a string beginning MSYS rather than MINGW as is
output by Msys. Allow either in pg_upgrade's test.sh.
Backpatch to all live branches.
The predecessor test boiled down to "PQserverVersion(NULL) >= 100000",
which is always false. No release includes that, so it could not have
reintroduced CVE-2018-1058. Back-patch to 9.4, like the addition of the
predecessor in commit 8d2814f274.
Discussion: https://postgr.es/m/20180422215551.GB2676194@rfd.leadboat.com
Avoid storing the result of PQsocket() in a pgsocket variable; it's
declared as int, and the no-socket test is properly written as "x < 0"
not "x == PGINVALID_SOCKET". This accidentally had no bad effect
because we never got to init_slot() with a bad connection, but it's
still wrong.
Actually, it seems like we should avoid storing the result for a long
period at all. The function's not so expensive that it's worth avoiding,
and the existing coding technique here would fail if anyone tried to
PQreset the connection during the life of the program. Hence, just
re-call PQsocket every time we construct a select(2) mask.
Speaking of select(), GetIdleSlot imagined that it could compute the
select mask once and continue to use it over multiple calls to
select_loop(), which is pretty bogus since that would stomp on the
mask on return. This could only matter if the function's outer loop
iterated more than once, which is unlikely (it'd take some connection
receiving data, but not enough to complete its command). But if it
did happen, we'd acquire "tunnel vision" and stop watching the other
connections for query termination, with the effect of losing parallelism.
Another way in which GetIdleSlot could lose parallelism is that once
PQisBusy returns false, it would lock in on that connection and do
PQgetResult until that returns NULL; in some cases that could result
in blocking. (Perhaps this can never happen in vacuumdb due to the
limited set of commands that it can issue, but I'm not quite sure
of that, and even if true today it's not a future-proof assumption.)
Refactor the code to do that properly, so that it risks blocking in
PQgetResult only in cases where we need to wait anyway.
Another loss-of-parallelism problem, which *is* easily demonstrable,
is that any setup queries issued during prepare_vacuum_command() were
always issued on the last-to-be-created connection, whether or not
that was idle. Long-running operations on that connection thus
prevented issuance of additional operations on the other ones, except
in the limited cases where no preparatory query was needed. Instead,
wait till we've identified a free connection and use that one.
Also, avoid core dump due to undersized malloc request in the case
that no tables are identified to be vacuumed.
The bogus no-socket test was noted by CharSyam, the other problems
identified in my own code review. Back-patch to 9.5 where parallel
vacuumdb was introduced.
Discussion: https://postgr.es/m/CAMrLSE6etb33-192DTEUGkV-TsvEcxtBDxGWG1tgNOMnQHwgDA@mail.gmail.com
After processing the filemap to build the list of chunks that will be
fetched from the source to rewing the target server, it is possible that
a file which was previously processed is removed from the source. A
simple example of such an occurence is a WAL segment which gets recycled
on the target in-between. When the filemap is processed, files not
categorized as relation files are first truncated to prepare for its
full copy of which is going to be taken from the source, divided into a
set of junks. However, for a recycled WAL segment, this would result in
a segment which has a zero-byte size. With such an empty file,
post-rewind recovery thinks that records are saved but they are actually
not because of the truncation which happened when processing the
filemap, resulting in data loss.
In order to fix the problem, make sure that files which are found as
removed on the source when receiving chunks of them are as well deleted
on the target server for consistency.
Back-patch to 9.5 where pg_rewind was added.
Author: Tsunakawa Takayuki
Reviewed-by: Michael Paquier
Reported-by: Tsunakawa Takayuki
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1F8DAAA2%40G01JPEXMBYT05
For years, our makefiles have correctly observed that "there is no correct
way to write a rule that generates two files". However, what we did is to
provide empty rules that "generate" the secondary output files from the
primary one, and that's not right either. Depending on the details of
the creating process, the primary file might end up timestamped later than
one or more secondary files, causing subsequent make runs to consider the
secondary file(s) out of date. That's harmless in a plain build, since
make will just re-execute the empty rule and nothing happens. But it's
fatal in a VPATH build, since make will expect the secondary file to be
rebuilt in the build directory. This would manifest as "file not found"
failures during VPATH builds from tarballs, if we were ever unlucky enough
to ship a tarball with apparently out-of-date secondary files. (It's not
clear whether that has ever actually happened, but it definitely could.)
To ensure that secondary output files have timestamps >= their primary's,
change our makefile convention to be that we provide a "touch $@" action
not an empty rule. Also, make sure that this rule actually gets invoked
during a distprep run, else the hazard remains.
It's been like this a long time, so back-patch to all supported branches.
In HEAD, I skipped the changes in src/backend/catalog/Makefile, because
those rules are due to get replaced soon in the bootstrap data format
patch, and there seems no need to create a merge issue for that patch.
If for some reason we fail to land that patch in v11, we'll need to
back-fill the changes in that one makefile from v10.
Discussion: https://postgr.es/m/18556.1521668179@sss.pgh.pa.us
Code that prints out the contents of setconfig or proconfig arrays in
SQL format needs to handle GUC_LIST_QUOTE variables differently from
other ones, because for those variables, flatten_set_variable_args()
already applied a layer of quoting. The value can therefore safely
be printed as-is, and indeed must be, or flatten_set_variable_args()
will muck it up completely on reload. For all other GUC variables,
it's necessary and sufficient to quote the value as a SQL literal.
We'd recognized the need for this long ago, but mis-analyzed the
need slightly, thinking that all GUC_LIST_INPUT variables needed
the special treatment. That's actually wrong, since a valid value
of a LIST variable might include characters that need quoting,
although no existing variables accept such values.
More to the point, we hadn't made any particular effort to keep the
various places that deal with this up-to-date with the set of variables
that actually need special treatment, meaning that we'd do the wrong
thing with, for example, temp_tablespaces values. This affects dumping
of SET clauses attached to functions, as well as ALTER DATABASE/ROLE SET
commands.
In ruleutils.c we can fix it reasonably honestly by exporting a guc.c
function that allows discovering the flags for a given GUC variable.
But pg_dump doesn't have easy access to that, so continue the old method
of having a hard-wired list of affected variable names. At least we can
fix it to have just one list not two, and update the list to match
current reality.
A remaining problem with this is that it only works for built-in
GUC variables. pg_dump's list obvious knows nothing of third-party
extensions, and even the "ask guc.c" method isn't bulletproof since
the relevant extension might not be loaded. There's no obvious
solution to that, so for now, we'll just have to discourage extension
authors from inventing custom GUCs that need GUC_LIST_QUOTE.
This has been busted for a long time, so back-patch to all supported
branches.
Michael Paquier and Tom Lane, reviewed by Kyotaro Horiguchi and
Pavel Stehule
Discussion: https://postgr.es/m/20180111064900.GA51030@paquier.xyz
In e170b8c8, protection against modified search_path was added. However,
PostgreSQL versions prior to 10 does not accept SQL commands over a
replication connection, so the protection would generate a syntax error.
Since we cannot run SQL commands on it, we are also not vulnerable to
the issue that e170b8c8 fixes, so we can just skip this command for
older versions.
Author: Michael Paquier <michael@paquier.xyz>
pg_rewind checks whether each file is a relation data file, from its path.
Previously this check logic had the bug which made pg_rewind fail to
recognize any relation data files in tablespaces. Which also caused
an assertion failure in pg_rewind.
Back-patch to 9.5 where pg_rewind was added.
Author: Takayuki Tsunakawa
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1F8D6C7A@G01JPEXMBYT05
The Makefile portion of 91f3ffc524 broke
the MSVC build. This patch reverts the changes to the Makefile and
adjusts it to work with the new code, while keeping the actual code
changes from the original patch.
Author: Victor Wagner <vitus@wagner.pp.ru>
This makes the client programs behave as documented regardless of the
connect-time search_path and regardless of user-created objects. Today,
a malicious user with CREATE permission on a search_path schema can take
control of certain of these clients' queries and invoke arbitrary SQL
functions under the client identity, often a superuser. This is
exploitable in the default configuration, where all users have CREATE
privilege on schema "public".
This changes behavior of user-defined code stored in the database, like
pg_index.indexprs and pg_extension_config_dump(). If they reach code
bearing unqualified names, "does not exist" or "no schema has been
selected to create in" errors might appear. Users may fix such errors
by schema-qualifying affected names. After upgrading, consider watching
server logs for these errors.
The --table arguments of src/bin/scripts clients have been lax; for
example, "vacuumdb -Zt pg_am\;CHECKPOINT" performed a checkpoint. That
now fails, but for now, "vacuumdb -Zt 'pg_am(amname);CHECKPOINT'" still
performs a checkpoint.
Back-patch to 9.3 (all supported versions).
Reviewed by Tom Lane, though this fix strategy was not his first choice.
Reported by Arseniy Sharoglazov.
Security: CVE-2018-1058
Historically, pg_dump has "set search_path = foo, pg_catalog" when
dumping an object in schema "foo", and has also caused that setting
to be used while restoring the object. This is problematic because
functions and operators in schema "foo" could capture references meant
to refer to pg_catalog entries, both in the queries issued by pg_dump
and those issued during the subsequent restore run. That could
result in dump/restore misbehavior, or in privilege escalation if a
nefarious user installs trojan-horse functions or operators.
This patch changes pg_dump so that it does not change the search_path
dynamically. The emitted restore script sets the search_path to what
was used at dump time, and then leaves it alone thereafter. Created
objects are placed in the correct schema, regardless of the active
search_path, by dint of schema-qualifying their names in the CREATE
commands, as well as in subsequent ALTER and ALTER-like commands.
Since this change requires a change in the behavior of pg_restore
when processing an archive file made according to this new convention,
bump the archive file version number; old versions of pg_restore will
therefore refuse to process files made with new versions of pg_dump.
Security: CVE-2018-1058
This oversight led to data corruption in matviews, manifesting as
"could not access status of transaction" before our most recent releases,
and "found xmin from before relfrozenxid" errors since then.
The proximate cause of the problem seems to have been confusion between
the task of preserving dropped-column status and the task of preserving
frozenxid status. Those are required for distinct sets of relkinds,
and the reasoning was entirely undocumented in the source code. In hopes
of forestalling future errors of the same kind, try to improve the
commentary in this area.
In passing, also improve the remarkably unhelpful comments around
pg_upgrade's set_frozenxids(). That's not actually buggy AFAICS,
but good luck figuring out what it does from the old comments.
Per report from Claudio Freire. It appears that bug #14852 from Alexey
Ermakov is an earlier report of the same issue, and there may be other
cases that we failed to identify at the time.
Patch by me based on analysis by Andres Freund. The bug dates back
to the introduction of matviews, so back-patch to all supported branches.
Discussion: https://postgr.es/m/CAGTBQpbrY9CdRGGhyBZ9yqY4jWaGC85rUF4X+R7d-aim=mBNsw@mail.gmail.com
Discussion: https://postgr.es/m/20171013115320.28049.86457@wrigleys.postgresql.org
pg_upgrade has always attempted to ensure that the transient dump files
it creates are inaccessible except to the owner. However, refactoring
in commit 76a7650c4 broke that for the file containing "pg_dumpall -g"
output; since then, that file was protected according to the process's
default umask. Since that file may contain role passwords (hopefully
encrypted, but passwords nonetheless), this is a particularly unfortunate
oversight. Prudent users of pg_upgrade on multiuser systems would
probably run it under a umask tight enough that the issue is moot, but
perhaps some users are depending only on pg_upgrade's umask changes to
protect their data.
To fix this in a future-proof way, let's just tighten the umask at
process start. There are no files pg_upgrade needs to write at a
weaker security level; and if there were, transiently relaxing the
umask around where they're created would be a safer approach.
Report and patch by Tom Lane; the idea for the fix is due to Noah Misch.
Back-patch to all supported branches.
Security: CVE-2018-1053
_tocEntryRequired() expects that it can identify ACL, SECURITY LABEL,
and COMMENT TOC entries that are for large objects by seeing whether
the tag for them starts with "LARGE OBJECT ". While that works fine
for actual large objects, which are indeed tagged that way, it's
subject to false positives unless every such entry's tag starts with an
appropriate type ID. And in fact it does not work for ACLs, because
up to now we customarily tagged those entries with just the bare name
of the object. This means that an ACL for an object named
"LARGE OBJECT something" would be misclassified as data not schema,
with undesirable results in a schema-only or data-only dump ---
although pg_upgrade seems unaffected, due to the special case for
binary-upgrade mode further down in _tocEntryRequired().
We can fix this by changing all the dumpACL calls to use the label
strings already in use for comments and security labels, which do
follow the convention of starting with an object type indicator.
Well, mostly they follow it. dumpDatabase() got it wrong, using
just the bare database name for those purposes, so that a database
named "LARGE OBJECT something" would similarly be subject to having
its comment or security label dropped or included when not wanted.
Bring that into line too. (Note that up to now, database ACLs have
not been processed by pg_dump, so that this issue doesn't affect them.)
_tocEntryRequired() itself is not free of fault: it was overly liberal
about matching object tags to "LARGE OBJECT " in binary-upgrade mode.
This looks like it is probably harmless because there would be no data
component to strip anyway in that mode, but at best it's trouble
waiting to happen, so tighten that up too.
The possible misclassification of SECURITY LABEL entries for databases is
in principle a security problem, but the opportunities for actual exploits
seem too narrow to be interesting. The other cases seem like just bugs,
since an object owner can change its ACL or comment for himself, he needn't
try to trick someone else into doing it by choosing a strange name.
This has been broken since per-large-object TOC entries were introduced
in 9.0, so back-patch to all supported branches.
Discussion: https://postgr.es/m/21714.1516553459@sss.pgh.pa.us
Upcoming versions of glibc will contain copy_file_range(2), a wrapper
around a new linux syscall for in-kernel copying of data ranges. This
conflicts with pg_rewinds function of the same name.
Therefore rename pg_rewinds version. As our version isn't a generic
copying facility we decided to choose a rewind specific function name.
Per buildfarm animal caiman and subsequent discussion with Tom Lane.
Author: Andres Freund
Discussion:
https://postgr.es/m/20180103033425.w7jkljth3e26sduc@alap3.anarazel.dehttps://postgr.es/m/31122.1514951044@sss.pgh.pa.us
Backpatch: 9.5-, where pg_rewind was introduced
A candidate path needs to be canonicalized before being checked against
the mappings, because the mappings are also canonicalized. This is
especially relevant on Windows
Reported-by: nb <nbedxp@gmail.com>
Author: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Ashutosh Sharma <ashu.coek88@gmail.com>
Buildfarm members skink and sungazer have both recently failed this
test, with symptoms indicating that the default 3-second timeout
isn't quite enough for those very slow systems. There's no reason
to be miserly with this timeout, so boost it to 60 seconds.
Back-patch to all versions containing this test. That may be overkill,
because the failure has only been observed in the v10 branch, but
I don't feel like having to revisit this later.
Commit 3eb9a5e7c unintentionally introduced an ordering dependency
into restore_toc_entries_prefork(). The existing coding of
reduce_dependencies() contains a check to skip moving a TOC entry
to the ready_list if it wasn't initially in the pending_list.
This used to suffice to prevent reduce_dependencies() from trying to
move anything into the ready_list during restore_toc_entries_prefork(),
because the pending_list stayed empty throughout that phase; but it no
longer does. The problem doesn't manifest unless the TOC has been
reordered by SortTocFromFile, which is how I missed it in testing.
To fix, just add a test for ready_list == NULL, converting the call
with NULL from a poor man's sanity check into an explicit command
not to touch TOC items' list membership. Clarify some of the comments
around this; in particular, note the primary purpose of the check for
pending_list membership, which is to ensure that we can't try to restore
the same item twice, in case a TOC list forces it to be restored before
its dependency count goes to zero.
Per report from Fabrízio de Royes Mello. Back-patch to 9.3, like the
previous commit.
Discussion: https://postgr.es/m/CAFcNs+pjuv0JL_x4+=71TPUPjdLHOXA4YfT32myj_OrrZb4ohA@mail.gmail.com
