Emmanuel Vadot d5d62a7a89 RPI DTS: Add value previously set by VideoCore and DTB links ... Using latest U-Boot for RPI 1 or 2 the DTB loaded by the firmware is discarded. The DTB was previously patched by the firmware to contain the DMA channel mask. DTB provided by the rpi firmware or DTS in the Linux tree contain the raw value directly. Do the same for our DTS as we cannot switch to the upstream ones yet. Not having the DMA channel mask setup properly cause mmc not to be detected (and probably other problems on driver using DMA). Also, add links for rpi dtb to the name used by u-boot. This way the dtb can be loaded by ubldr using the U-Boot env variable fdtfile. Tested On: RPI B Rev2, RPI Zero, RPI 2 v1.1 RPI 2 v1.2 Thanks to Sylvain Garrigues <sylvain@sylvaingarrigues.com> for the help. PR: 218344		2017-08-19 14:27:11 +00:00
..
arm	RPI DTS: Add value previously set by VideoCore and DTB links	2017-08-19 14:27:11 +00:00
arm64	A64 thermal sensor IRQ is GIC_SPI 31, not 41.	2016-09-04 22:30:46 +00:00
mips	Switch BERI Programmable Interrupt Controller to INTRNG.	2017-04-18 17:20:03 +00:00
powerpc	Make dpaa work with only slightly modified Linux device trees.	2016-11-12 20:45:03 +00:00
bindings-gpio.txt	Add the missing ')' at end of sentence. Reword it to use a more common	2014-02-05 17:08:55 +00:00
bindings-localbus.txt	Add architecture dependent code to support NAND Framework on Marvell SoCs.	2012-05-18 14:41:14 +00:00
bindings-mpp.txt
Makefile	Add Allwinner A64 (sun50i) and Pine64 dts files.	2016-08-31 16:56:54 +00:00
Makefile.inc	Fix the script to run make_dtb.sh instead of just dtc.	2014-06-07 02:38:13 +00:00